Search Results

Search found 85 results on 4 pages for 'nis simonsen'.

Page 4/4 | < Previous Page | 1 2 3 4 

  • Can't install new database in OpenLDAP 2.4 with BDB on Debian

    - by Timothy High
    I'm trying to install an openldap server (slapd) on a Debian EC2 instance. I have followed all the instructions I can find, and am using the recommended slapd-config approach to configuration. It all seems to be just fine, except that for some reason it can't create my new database. ldap.conf.bak (renamed to ensure it's not being used): ########## # Basics # ########## include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/inetorgperson.schema pidfile /var/run/slapd/slapd.pid argsfile /var/run/slapd/slapd.args loglevel none modulepath /usr/lib/ldap # modulepath /usr/local/libexec/openldap moduleload back_bdb.la database config #rootdn "cn=admin,cn=config" rootpw secret database bdb suffix "dc=example,dc=com" rootdn "cn=manager,dc=example,dc=com" rootpw secret directory /usr/local/var/openldap-data ######## # ACLs # ######## access to attrs=userPassword by anonymous auth by self write by * none access to * by self write by * none When I run slaptest on it, it complains that it couldn't find the id2entry.bdb file: root@server:/etc/ldap# slaptest -f ldap.conf.bak -F slapd.d bdb_db_open: database "dc=example,dc=com": db_open(/usr/local/var/openldap-data/id2entry.bdb) failed: No such file or directory (2). backend_startup_one (type=bdb, suffix="dc=example,dc=com"): bi_db_open failed! (2) slap_startup failed (test would succeed using the -u switch) Using the -u switch it works, of course. But that merely creates the configuration. It doesn't resolve the underlying problem: root@server:/etc/ldap# slaptest -f ldap.conf.bak -F slapd.d -u config file testing succeeded Looking in the database directory, the basic files are there (with right ownership, after a manual chown), but the dbd file wasn't created: root@server:/etc/ldap# ls -al /usr/local/var/openldap-data total 4328 drwxr-sr-x 2 openldap openldap 4096 Mar 1 15:23 . drwxr-sr-x 4 root staff 4096 Mar 1 13:50 .. -rw-r--r-- 1 openldap openldap 3080 Mar 1 14:35 DB_CONFIG -rw------- 1 openldap openldap 24576 Mar 1 15:23 __db.001 -rw------- 1 openldap openldap 843776 Mar 1 15:23 __db.002 -rw------- 1 openldap openldap 2629632 Mar 1 15:23 __db.003 -rw------- 1 openldap openldap 655360 Mar 1 14:35 __db.004 -rw------- 1 openldap openldap 4431872 Mar 1 15:23 __db.005 -rw------- 1 openldap openldap 32768 Mar 1 15:23 __db.006 -rw-r--r-- 1 openldap openldap 2048 Mar 1 15:23 alock (note that, because I'm doing this as root, I had to also change ownership of some of the files created by slaptest) Finally, I can start the slapd service, but it dies in the attempt (text from syslog): Mar 1 15:06:23 server slapd[21160]: @(#) $OpenLDAP: slapd 2.4.23 (Jun 15 2011 13:31:57) $#012#011@incagijs:/home/thijs/debian/p-u/openldap-2.4.23/debian/build/servers/slapd Mar 1 15:06:23 server slapd[21160]: config error processing olcDatabase={1}bdb,cn=config: Mar 1 15:06:23 server slapd[21160]: slapd stopped. Mar 1 15:06:23 server slapd[21160]: connections_destroy: nothing to destroy. I manually checked the olcDatabase={1}bdb file, and it looks fine to my amateur eye. All my specific configs are there. Unfortunately, syslog isn't reporting a specific error in this case (if it were a file permission error, it would say). I've tried uninstalling and reinstalling slapd, changing permissions, Googling my wits out, but I'm tapped out. Any OpenLDAP genius out there would be greatly appreciated!

    Read the article

  • Sendmail relay authentication

    - by Pawel Veselov
    I'm trying to set up my sendmail to authenticate against a relay (comcast). I'm not seeing any attempts to authenticate at all. I'm trying to just debug how authentication works, and can't connect all the pieces... I have, in my .mc file: define(`RELAY_MAILER_ARGS', `TCP $h 587')dnl define(`SMART_HOST', `relay:smtp.comcast.net.')dnl define(`confAUTH_MECHANISMS', `PLAIN')dnl FEATURE(`authinfo',`hash /etc/mail/client-info')dnl And in my /etc/mail/client-info: AuthInfo:*.comcast.net "U:root" "I:comcast_user" "P:comcast_password" Now, I know everything is fine with the u/p, as I could authenticate directly through SMTP, using telnet. There are two things I don't understand. When AuthInfo records are searched for, they are matched by the target hostname. How? Does it it use the map key (something I would expect), or uses the so-called "Domain" ("R:" parameter that I don't set in my auth-info line) What is "U:", really? Sendmail README (http://www.sendmail.org/m4/smtp_auth.html) says it's "user(authoraztion id)", and "I:" is "authentication ID". That suggests that my username should be in "U:", actually, but http://www.sendmail.org/~ca/email/auth.html says that "I:" is your remote user name. The session looks like this: [root@manticore]/etc/mail# sendmail -qf -v Warning: Option: AuthMechanisms requires SASL support (-DSASL) Running /var/spool/mqueue/p97CgcWq023273 (sequence 1 of 399) [email protected]... Connecting to smtp.comcast.net. port 587 via relay... 220 omta19.westchester.pa.mail.comcast.net comcast ESMTP server ready >>> EHLO my.host.name 250-omta19.westchester.pa.mail.comcast.net hello [my.ip.add.res], pleased to meet you 250-HELP 250-AUTH LOGIN PLAIN 250-SIZE 15728640 250-ENHANCEDSTATUSCODES 250-8BITMIME 250-STARTTLS 250 OK >>> STARTTLS 220 2.0.0 Ready to start TLS >>> EHLO my.host.name 250-omta19.westchester.pa.mail.comcast.net hello [my.ip.add.res], pleased to meet you 250-HELP 250-AUTH LOGIN PLAIN 250-SIZE 15728640 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 OK >>> MAIL From:<> SIZE=2183 550 5.1.0 Authentication required MAILER-DAEMON... aliased to postmaster postmaster... aliased to root root... aliased to [email protected] postmaster... aliased to root root... aliased to [email protected] >>> RSET 250 2.0.0 OK [root@manticore]/etc/mail# sendmail -d0.1 Version 8.14.3 Compiled with: DNSMAP LOG MAP_REGEX MATCHGECOS MILTER MIME7TO8 MIME8TO7 NAMED_BIND NETINET NETINET6 NETUNIX NEWDB NIS PIPELINING SCANF SOCKETMAP STARTTLS TCPWRAPPERS USERDB XDEBUG Thanks, Pawel.

    Read the article

  • How to grow to be global sysadmin of an organization?

    - by user64729
    Bit of a non-technical question but I have seen questions of the career development type on here before so hopefully it is fine. I work for a fast growing but still small organization (~65 employees). I have been their external sysadmin for a while now, looking after hosted Linux servers and infrastructure. In the past 12 months I have been transforming into the internal sysadmin for our office too. I'm currently studying Cisco CCNA to cover the demands of being an internal sysadmin and looking after the office LAN, routers, switches and VPNs. Now they want me to look after the global sysadmin function of the organization as a whole. The organization has 3 offices in total, 2 in the UK and 1 in the US. I work in one of the UK offices. The other offices are primarily Windows desktops with AD domain shops. My office is primarily a Linux shop with a file-server and NFS/NIS (no AD domain for the Windows desktops yet but it's in the works). Each other office has a sysadmin which in theory I am supposed to supervise but in reality each is independent. I have a very competent junior sysadmin working with me who shares the day-to-day tasks and does some of the longer term projects with my supervision. My boss has asked me how to grow from being the external sysadmin to the global sysadmin. I am to ponder this and then report back to him on how to achieve this. My current thoughts are: Management training or professional development - eg. reading books such as "Influencer" and "7 Habits". Also I feel I should take steps to improving communication skills since a senior person is expected to talk and speak out more often. Learn more about Windows and Active Directory - I'm an LPI-certified guy and have a lot of experience in Linux (Ubuntu or desktop, Debian/Ubuntu as server). Since the other offices are mainly Windows-domains it makes sense to skill-up in that area so I can understand what the other admins are talking about. Talk to previous colleagues who have are are in this role already - to try and get the benefit of their experience. Produce an "IT Roadmap" or similar that maps out where we want the organization to be and when, plotted out over the next couple of years with regards to internal and external infrastructure. I have produced a "Security roadmap" already which does cover some of these things. I guess this can summed up as "thinking more strategically"? I'd appreciate comments from anyone who has been through a similar situation, thanks.

    Read the article

  • Exiting a reboot loop

    - by user12617035
    If you're in a situation where the system is panic'ing during boot, you can use # boot net -s to regain control of your system. In my case, I'd added some diagnostic code to a (PCI) driver (that is used to boot the root filesystem). There was a bug in the driver, and each time during boot, the bug occurred, and so caused the system to panic: ... 000000000180b950 genunix:vfs_mountroot+60 (800, 200, 0, 185d400, 1883000, 18aec00) %l0-3: 0000000000001770 0000000000000640 0000000001814000 00000000000008fc %l4-7: 0000000001833c00 00000000018b1000 0000000000000600 0000000000000200 000000000180ba10 genunix:main+98 (18141a0, 1013800, 18362c0, 18ab800, 180e000, 1814000) %l0-3: 0000000070002000 0000000000000001 000000000180c000 000000000180e000 %l4-7: 0000000000000001 0000000001074800 0000000000000060 0000000000000000 skipping system dump - no dump device configured rebooting... If you're logged in via the console, you can send a BREAK sequence in order to gain control of the firmware's (OBP's) prompt. Enter Ctrl-Shift-[ in order to get the TELNET prompt. Once telnet has control, enter this: telnet> send brk You'll be presented with OBP's prompt: ok You then enter the following in order to boot into single-user mode via the network: ok boot net -s Note that booting from the network under Solaris will implicitly cause the system to be INSTALLED with whatever software had last been configured to be installed. However, we are using boot net -s as a "handle" with which to get at the Solaris prompt. Once at that prompt, we can perform actions as root that will let us back out our buggy driver (ok... MY buggy driver :-)) ...and replace it with the original, non-buggy driver. Entering the boot command caused the following output, as well as left us at the Solaris prompt (in single-user-mode): Sun Blade 1500, No Keyboard Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.16.4, 1024 MB memory installed, Serial #53463393. Ethernet address 0:3:ba:2f:c9:61, Host ID: 832fc961. Rebooting with command: boot net -s Boot device: /pci@1f,700000/network@2 File and args: -s 1000 Mbps FDX Link up Timeout waiting for ARP/RARP packet Timeout waiting for ARP/RARP packet 4000 1000 Mbps FDX Link up Requesting Internet address for 0:3:ba:2f:c9:61 SunOS Release 5.10 Version Generic_118833-17 64-bit Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. Booting to milestone "milestone/single-user:default". Configuring devices. Using RPC Bootparams for network configuration information. Attempting to configure interface bge0... Configured interface bge0 Requesting System Maintenance Mode SINGLE USER MODE # Our goal is to now move to the directory containing the buggy driver and replace it with the original driver (that we had saved away before ever loading our buggy driver! :-) However, since we booted from the network, the root filesystem ("/") is NOT mounted on one of our local disks. It is mounted on an NFS filesystem exported by our install server. To verify this, enter the following command: # mount | head -1 / on my-server:/export/install/media/s10u2/solarisdvd.s10s_u2dvd/latest/Solaris_10/Tools/Boot remote/read/write/setuid/devices/dev=4ac0001 on Wed Dec 31 16:00:00 1969 As a result, we have to create a temporary mount point and then mount the local disk onto that mount point: # mkdir /tmp/mnt # mount /dev/dsk/c0t0d0s0 /tmp/mnt Note that your system will not necessarily have had its root filesystem on "c0t0d0s0". This is something that you should also have recorded before you ever loaded your.. er... "my" buggy driver! :-) One can find the local disk mounted under the root filesystem by entering: # df -k / Filesystem kbytes used avail capacity Mounted on /dev/dsk/c0t0d0s0 76703839 4035535 71901266 6% / To continue with our example, we can now move to the directory of buggy-driver in order to replace it with the original driver. Note that /tmp/mnt is prefixed to the path of where we'd "normally" find the driver: # cd /tmp/mnt/platform/sun4u/kernel/drv/sparcv9 # ls -l pci\* -rw-r--r-- 1 root root 288504 Dec 6 15:38 pcisch -rw-r--r-- 1 root root 288504 Dec 6 15:38 pcisch.aar -rwxr-xr-x 1 root sys 211616 Jun 8 2006 pcisch.orig # cp -p pcisch.orig pcisch We can now synchronize any in-memory filesystem data structures with those on disk... and then reboot. The system will then boot correctly... as expected: # sync;sync # reboot syncing file systems... done Sun Blade 1500, No Keyboard Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.16.4, 1024 MB memory installed, Serial #xxxxxxxx. Ethernet address 0:3:ba:2f:c9:61, Host ID: yyyyyyyy. Rebooting with command: boot Boot device: /pci@1e,600000/ide@d/disk@0,0:a File and args: SunOS Release 5.10 Version Generic_118833-17 64-bit Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. Hostname: my-host NIS domain name is my-campus.Central.Sun.COM my-host console login: ...so that's how it's done! Of course, the easier way is to never write a buggy-driver... but.. then.. we all "have an eraser on the end of each of our pencils"... don't we ? :-) "...thank you... and good night..."

    Read the article

  • Allow Incoming Responses Apache. On Ubuntu 11.10 - Curl

    - by Daniel Adarve
    I'm trying to get a Curl Response from an outside server, however I noticed I cant neither PING the server in question nor connect to it. I tried disabling the iptables firewall but I had no success. My server is running behind a Cisco Linksys WRTN310N Router with the DD-wrt firmware Installed. In which I already disabled the firewall. Here are my network settings: Ifconfig eth0 Link encap:Ethernet HWaddr 00:26:b9:76:73:6b inet addr:192.168.1.120 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:b9ff:fe76:736b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:49713 errors:0 dropped:0 overruns:0 frame:0 TX packets:30987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52829022 (52.8 MB) TX bytes:5438223 (5.4 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:341 errors:0 dropped:0 overruns:0 frame:0 TX packets:341 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:27604 (27.6 KB) TX bytes:27604 (27.6 KB) /etc/resolv.conf nameserver 192.168.1.1 /etc/nsswitch.com passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis /etc/host.conf order hosts,bind multi on /etc/hosts 127.0.0.1 localhost 127.0.0.1 callcenter # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.120 netmask 255.255.255.0 network 192.168.1.1 broadcast 192.168.1.255 gateway 192.168.1.1 The Url to which im trying to get a connection to is https://www.veripayment.com/integration/index.php When I ping it on terminal heres what I get daniel@callcenter:~$ ping https://www.veripayment.com/integration/index.php ping: unknown host https://www.veripayment.com/integration/index.php daniel@callcenter:~$ ping www.veripayment.com PING www.veripayment.com (69.172.200.5) 56(84) bytes of data. --- www.veripayment.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms PHP Function in codeigniter public function authorizePayment(){ //--------------------------------------------------- // Authorize a payment //--------------------------------------------------- // Get variables from POST array $post_str = "action=payment&business=" .urlencode($this->input->post('business')) ."&vericode=" .urlencode($this->input->post('vericode')) ."&item_name=" .urlencode($this->input->post('item_name')) ."&item_code=" .urlencode($this->input->post('item_code')) ."&quantity=" .urlencode($this->input->post('quantity')) ."&amount=" .urlencode($this->input->post('amount')) ."&cc_type=" .urlencode($this->input->post('cc_type')) ."&cc_number=" .urlencode($this->input->post('cc_number')) ."&cc_expdate=" .urlencode($this->input->post('cc_expdate_year')).urlencode($this->input->post('cc_expdate_month')) ."&cc_security_code=" .urlencode($this->input->post('cc_security_code')) ."&shipment=" .urlencode($this->input->post('shipment')) ."&first_name=" .urlencode($this->input->post('first_name')) ."&last_name=" .urlencode($this->input->post('last_name')) ."&address=" .urlencode($this->input->post('address')) ."&city=" .urlencode($this->input->post('city')) ."&state_or_province=" .urlencode($this->input->post('state_or_province')) ."&zip_or_postal_code=" .urlencode($this->input->post('zip_or_postal_code')) ."&country=" .urlencode($this->input->post('country')) ."&shipping_address=" .urlencode($this->input->post('shipping_address')) ."&shipping_city=" .urlencode($this->input->post('shipping_city')) ."&shipping_state_or_province=" .urlencode($this->input->post('shipping_state_or_province')) ."&shipping_zip_or_postal_code=".urlencode($this->input->post('shipping_zip_or_postal_code')) ."&shipping_country=" .urlencode($this->input->post('shipping_country')) ."&phone=" .urlencode($this->input->post('phone')) ."&email=" .urlencode($this->input->post('email')) ."&ip_address=" .urlencode($this->input->post('ip_address')) ."&website_unique_id=" .urlencode($this->input->post('website_unique_id')); // Send URL string via CURL $backendUrl = "https://www.veripayment.com/integration/index.php"; $this->curl->create($backendUrl); $this->curl->post($post_str); $return = $this->curl->execute(); $result = array(); // Explode array where blanks are found $resparray = explode(' ', $return); if ($resparray) { // save results into an array foreach ($resparray as $resp) { $keyvalue = explode('=', $resp); if(isset($keyvalue[1])){ $result[$keyvalue[0]] = str_replace('"', '', $keyvalue[1]); } } } return $result; } This gets an empty result array. This function however works well in the previous server where the script was hosted before. No modifications where made whatsoever Thanks in Advance

    Read the article

  • Solaris: What comes next?

    - by alanc
    As you probably know by now, a few months ago, we released Solaris 11 after years of development. That of course means we now need to figure out what comes next - if Solaris 11 is “The First Cloud OS”, then what do we need to make future releases of Solaris be, to be modern and competitive when they're released? So we've been having planning and brainstorming meetings, and I've captured some notes here from just one of those we held a couple weeks ago with a number of the Silicon Valley based engineers. Now before someone sees an idea here and calls their product rep wanting to know what's up, please be warned what follows are rough ideas, and as I'll discuss later, none of them have any committment, schedule, working code, or even plan for integration in any possible future product at this time. (Please don't make me force you to read the full Oracle future product disclaimer here, you should know it by heart already from the front of every Oracle product slide deck.) To start with, we did some background research, looking at ideas from other Oracle groups, and competitive OS'es. We examined what was hot in the technology arena and where the interesting startups were heading. We then looked at Solaris to see where we could apply those ideas. Making Network Admins into Socially Networking Admins We all know an admin who has grumbled about being the only one stuck late at work to fix a problem on the server, or having to work the weekend alone to do scheduled maintenance. But admins are humans (at least most are), and crave companionship and community with their fellow humans. And even when they're alone in the server room, they're never far from a network connection, allowing access to the wide world of wonders on the Internet. Our solution here is not building a new social network - there's enough of those already, and Oracle even has its own Oracle Mix social network already. What we proposed is integrating Solaris features to help engage our system admins with these social networks, building community and bringing them recognition in the workplace, using achievement recognition systems as found in many popular gaming platforms. For instance, if you had a Facebook account, and a group of admin friends there, you could register it with our Social Network Utility For Facebook, and then your friends might see: Alan earned the achievement Critically Patched (April 2012) for patching all his servers. Matt is only at 50% - encourage him to complete this achievement today! To avoid any undue risk of advertising who has unpatched servers that are easier targets for hackers to break into, this information would be tightly protected via Facebook's world-renowned privacy settings to avoid it falling into the wrong hands. A related form of gamification we considered was replacing simple certfications with role-playing-game-style Experience Levels. Instead of just knowing an admin passed a test establishing a given level of competency, these would provide recruiters with a more detailed level of how much real-world experience an admin has. Achievements such as the one above would feed into it, but larger numbers of experience points would be gained by tougher or more critical tasks - such as recovering a down system, or migrating a service to a new platform. (As long as it was an Oracle platform of course - migrating to an HP or IBM platform would cause the admin to lose points with us.) Unfortunately, we couldn't figure out a good way to prevent (if you will) “gaming” the system. For instance, a disgruntled admin might decide to start ignoring warnings from FMA that a part is beginning to fail or skip preventative maintenance, in the hopes that they'd cause a catastrophic failure to earn more points for bolstering their resume as they look for a job elsewhere, and not worrying about the effect on your business of a mission critical server going down. More Z's for ZFS Our suggested new feature for ZFS was inspired by the worlds most successful Z-startup of all time: Zynga. Using the Social Network Utility For Facebook described above, we'd tie it in with ZFS monitoring to help you out when you find yourself in a jam needing more disk space than you have, and can't wait a month to get a purchase order through channels to buy more. Instead with the click of a button you could post to your group: Alan can't find any space in his server farm! Can you help? Friends could loan you some space on their connected servers for a few weeks, knowing that you'd return the favor when needed. ZFS would create a new filesystem for your use on their system, and securely share it with your system using Kerberized NFS. If none of your friends have space, then you could buy temporary use space in small increments at affordable rates right there in Facebook, using your Facebook credits, and then file an expense report later, after the urgent need has passed. Universal Single Sign On One thing all the engineers agreed on was that we still had far too many "Single" sign ons to deal with in our daily work. On the web, every web site used to have its own password database, forcing us to hope we could remember what login name was still available on each site when we signed up, and which unique password we came up with to avoid having to disclose our other passwords to a new site. In recent years, the web services world has finally been reducing the number of logins we have to manage, with many services allowing you to login using your identity from Google, Twitter or Facebook. So we proposed following their lead, introducing PAM modules for web services - no more would you have to type in whatever login name IT assigned and try to remember the password you chose the last time password aging forced you to change it - you'd simply choose which web service you wanted to authenticate against, and would login to your Solaris account upon reciept of a cookie from their identity service. Pinning notes to the cloud We also all noted that we all have our own pile of notes we keep in our daily work - in text files in our home directory, in notebooks we carry around, on white boards in offices and common areas, on sticky notes on our monitors, or on scraps of paper pinned to our bulletin boards. The contents of the notes vary, some are things just for us, some are useful for our groups, some we would share with the world. For instance, when our group moved to a new building a couple years ago, we had a white board in the hallway listing all the NIS & DNS servers, subnets, and other network configuration information we needed to set up our Solaris machines after the move. Similarly, as Solaris 11 was finishing and we were all learning the new network configuration commands, we shared notes in wikis and e-mails with our fellow engineers. Users may also remember one of the popular features of Sun's old BigAdmin site was a section for sharing scripts and tips such as these. Meanwhile, the online "pin board" at Pinterest is taking the web by storm. So we thought, why not mash those up to solve this problem? We proposed a new BigAddPin site where users could “pin” notes, command snippets, configuration information, and so on. For instance, once they had worked out the ideal Automated Installation manifest for their app server, they could pin it up to share with the rest of their group, or choose to make it public as an example for the world. Localized data, such as our group's notes on the servers for our subnet, could be shared only to users connecting from that subnet. And notes that they didn't want others to see at all could be marked private, such as the list of phone numbers to call for late night pizza delivery to the machine room, the birthdays and anniversaries they can never remember but would be sleeping on the couch if they forgot, or the list of automatically generated completely random, impossible to remember root passwords to all their servers. For greater integration with Solaris, we'd put support right into the command shells — redirect output to a pinned note, set your path to include pinned notes as scripts you can run, or bring up your recent shell history and pin a set of commands to save for the next time you need to remember how to do that operation. Location service for Solaris servers A longer term plan would involve convincing the hardware design groups to put GPS locators with wireless transmitters in future server designs. This would help both admins and service personnel trying to find servers in todays massive data centers, and could feed into location presence apps to help show potential customers that while they may not see many Solaris machines on the desktop any more, they are all around. For instance, while walking down Wall Street it might show “There are over 2000 Solaris computers in this block.” [Note: this proposal was made before the recent media coverage of a location service aggregrator app with less noble intentions, and in hindsight, we failed to consider what happens when such data similarly falls into the wrong hands. We certainly wouldn't want our app to be misinterpreted as “There are over $20 million dollars of SPARC servers in this building, waiting for you to steal them.” so it's probably best it was rejected.] Harnessing the power of the GPU for Security Most modern OS'es make use of the widespread availability of high powered GPU hardware in today's computers, with desktop environments requiring 3-D graphics acceleration, whether in Ubuntu Unity, GNOME Shell on Fedora, or Aero Glass on Windows, but we haven't yet made Solaris fully take advantage of this, beyond our basic offering of Compiz on the desktop. Meanwhile, more businesses are interested in increasing security by using biometric authentication, but must also comply with laws in many countries preventing discrimination against employees with physical limations such as missing eyes or fingers, not to mention the lost productivity when employees can't login due to tinted contacts throwing off a retina scan or a paper cut changing their fingerprint appearance until it heals. Fortunately, the two groups considering these problems put their heads together and found a common solution, using 3D technology to enable authentication using the one body part all users are guaranteed to have - pam_phrenology.so, a new PAM module that uses an array USB attached web cams (or just one if the user is willing to spin their chair during login) to take pictures of the users head from all angles, create a 3D model and compare it to the one in the authentication database. While Mythbusters has shown how easy it can be to fool common fingerprint scanners, we have not yet seen any evidence that people can impersonate the shape of another user's cranium, no matter how long they spend beating their head against the wall to reshape it. This could possibly be extended to group users, using modern versions of some of the older phrenological studies, such as giving all users with long grey beards access to the System Architect role, or automatically placing users with pointy spikes in their hair into an easy use mode. Unfortunately, there are still some unsolved technical challenges we haven't figured out how to overcome. Currently, a visit to the hair salon causes your existing authentication to expire, and some users have found that shaving their heads is the only way to avoid bad hair days becoming bad login days. Reaction to these ideas After gathering all our notes on these ideas from the engineering brainstorming meeting, we took them in to present to our management. Unfortunately, most of their reaction cannot be printed here, and they chose not to accept any of these ideas as they were, but they did have some feedback for us to consider as they sent us back to the drawing board. They strongly suggested our ideas would be better presented if we weren't trying to decipher ink blotches that had been smeared by the condensation when we put our pint glasses on the napkins we were taking notes on, and to that end let us know they would not be approving any more engineering offsites in Irish themed pubs on the Friday of a Saint Patrick's Day weekend. (Hopefully they mean that situation specifically and aren't going to deny the funding for travel to this year's X.Org Developer's Conference just because it happens to be in Bavaria and ending on the Friday of the weekend Oktoberfest starts.) They recommended our research techniques could be improved over just sitting around reading blogs and checking our Facebook, Twitter, and Pinterest accounts, such as considering input from alternate viewpoints on topics such as gamification. They also mentioned that Oracle hadn't fully adopted some of Sun's common practices and we might have to try harder to get those to be accepted now that we are one unified company. So as I said at the beginning, don't pester your sales rep just yet for any of these, since they didn't get approved, but if you have better ideas, pass them on and maybe they'll get into our next batch of planning.

    Read the article

  • Configuring OpenLDAP and SSL

    - by Stormshadow
    I am having trouble trying to connect to a secure OpenLDAP server which I have set up. On running my LDAP client code java -Djavax.net.debug=ssl LDAPConnector I get the following exception trace (java version 1.6.0_17) trigger seeding of SecureRandom done seeding SecureRandom %% No cached client session *** ClientHello, TLSv1 RandomCookie: GMT: 1256110124 bytes = { 224, 19, 193, 148, 45, 205, 108, 37, 101, 247, 112, 24, 157, 39, 111, 177, 43, 53, 206, 224, 68, 165, 55, 185, 54, 203, 43, 91 } Session ID: {} Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_W ITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SH A, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA] Compression Methods: { 0 } *** Thread-0, WRITE: TLSv1 Handshake, length = 73 Thread-0, WRITE: SSLv2 client hello message, length = 98 Thread-0, received EOFException: error Thread-0, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake Thread-0, SEND TLSv1 ALERT: fatal, description = handshake_failure Thread-0, WRITE: TLSv1 Alert, length = 2 Thread-0, called closeSocket() main, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake javax.naming.CommunicationException: simple bind failed: ldap.natraj.com:636 [Root exception is javax.net.ssl.SSLHandshakeException: Remote host closed connection during hands hake] at com.sun.jndi.ldap.LdapClient.authenticate(Unknown Source) at com.sun.jndi.ldap.LdapCtx.connect(Unknown Source) at com.sun.jndi.ldap.LdapCtx.<init>(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(Unknown Source) at javax.naming.spi.NamingManager.getInitialContext(Unknown Source) at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source) at javax.naming.InitialContext.init(Unknown Source) at javax.naming.InitialContext.<init>(Unknown Source) at javax.naming.directory.InitialDirContext.<init>(Unknown Source) at LDAPConnector.CallSecureLDAPServer(LDAPConnector.java:43) at LDAPConnector.main(LDAPConnector.java:237) Caused by: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source) at java.io.BufferedInputStream.fill(Unknown Source) at java.io.BufferedInputStream.read1(Unknown Source) at java.io.BufferedInputStream.read(Unknown Source) at com.sun.jndi.ldap.Connection.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: java.io.EOFException: SSL peer shut down incorrectly at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source) ... 9 more I am able to connect to the same secure LDAP server however if I use another version of java (1.6.0_14) I have created and installed the server certificates in the cacerts of both the JRE's as mentioned in this guide -- OpenLDAP with SSL When I run ldapsearch -x on the server I get # extended LDIF # # LDAPv3 # base <dc=localdomain> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # localdomain dn: dc=localdomain objectClass: top objectClass: dcObject objectClass: organization o: localdomain dc: localdomain # admin, localdomain dn: cn=admin,dc=localdomain objectClass: simpleSecurityObject objectClass: organizationalRole cn: admin description: LDAP administrator # search result search: 2 result: 0 Success # numResponses: 3 # numEntries: 2 On running openssl s_client -connect ldap.natraj.com:636 -showcerts , I obtain the self signed certificate. My slapd.conf file is as follows ####################################################################### # Global Directives: # Features to permit #allow bind_v2 # Schema and objectClass definitions include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/inetorgperson.schema # Where the pid file is put. The init.d script # will not stop the server if you change this. pidfile /var/run/slapd/slapd.pid # List of arguments that were passed to the server argsfile /var/run/slapd/slapd.args # Read slapd.conf(5) for possible values loglevel none # Where the dynamically loaded modules are stored modulepath /usr/lib/ldap moduleload back_hdb # The maximum number of entries that is returned for a search operation sizelimit 500 # The tool-threads parameter sets the actual amount of cpu's that is used # for indexing. tool-threads 1 ####################################################################### # Specific Backend Directives for hdb: # Backend specific directives apply to this backend until another # 'backend' directive occurs backend hdb ####################################################################### # Specific Backend Directives for 'other': # Backend specific directives apply to this backend until another # 'backend' directive occurs #backend <other> ####################################################################### # Specific Directives for database #1, of type hdb: # Database specific directives apply to this databasse until another # 'database' directive occurs database hdb # The base of your directory in database #1 suffix "dc=localdomain" # rootdn directive for specifying a superuser on the database. This is needed # for syncrepl. rootdn "cn=admin,dc=localdomain" # Where the database file are physically stored for database #1 directory "/var/lib/ldap" # The dbconfig settings are used to generate a DB_CONFIG file the first # time slapd starts. They do NOT override existing an existing DB_CONFIG # file. You should therefore change these settings in DB_CONFIG directly # or remove DB_CONFIG and restart slapd for changes to take effect. # For the Debian package we use 2MB as default but be sure to update this # value if you have plenty of RAM dbconfig set_cachesize 0 2097152 0 # Sven Hartge reported that he had to set this value incredibly high # to get slapd running at all. See http://bugs.debian.org/303057 for more # information. # Number of objects that can be locked at the same time. dbconfig set_lk_max_objects 1500 # Number of locks (both requested and granted) dbconfig set_lk_max_locks 1500 # Number of lockers dbconfig set_lk_max_lockers 1500 # Indexing options for database #1 index objectClass eq # Save the time that the entry gets modified, for database #1 lastmod on # Checkpoint the BerkeleyDB database periodically in case of system # failure and to speed slapd shutdown. checkpoint 512 30 # Where to store the replica logs for database #1 # replogfile /var/lib/ldap/replog # The userPassword by default can be changed # by the entry owning it if they are authenticated. # Others should not be able to see it, except the # admin entry below # These access lines apply to database #1 only access to attrs=userPassword,shadowLastChange by dn="cn=admin,dc=localdomain" write by anonymous auth by self write by * none # Ensure read access to the base for things like # supportedSASLMechanisms. Without this you may # have problems with SASL not knowing what # mechanisms are available and the like. # Note that this is covered by the 'access to *' # ACL below too but if you change that as people # are wont to do you'll still need this if you # want SASL (and possible other things) to work # happily. access to dn.base="" by * read # The admin dn has full write access, everyone else # can read everything. access to * by dn="cn=admin,dc=localdomain" write by * read # For Netscape Roaming support, each user gets a roaming # profile for which they have write access to #access to dn=".*,ou=Roaming,o=morsnet" # by dn="cn=admin,dc=localdomain" write # by dnattr=owner write ####################################################################### # Specific Directives for database #2, of type 'other' (can be hdb too): # Database specific directives apply to this databasse until another # 'database' directive occurs #database <other> # The base of your directory for database #2 #suffix "dc=debian,dc=org" ####################################################################### # SSL: # Uncomment the following lines to enable SSL and use the default # snakeoil certificates. #TLSCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem #TLSCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key TLSCipherSuite TLS_RSA_AES_256_CBC_SHA TLSCACertificateFile /etc/ldap/ssl/server.pem TLSCertificateFile /etc/ldap/ssl/server.pem TLSCertificateKeyFile /etc/ldap/ssl/server.pem My ldap.conf file is # # LDAP Defaults # # See ldap.conf(5) for details # This file should be world readable but not world writable. HOST ldap.natraj.com PORT 636 BASE dc=localdomain URI ldaps://ldap.natraj.com TLS_CACERT /etc/ldap/ssl/server.pem TLS_REQCERT allow #SIZELIMIT 12 #TIMELIMIT 15 #DEREF never Why is it that I can connect to the same server using one version of JRE while I cannot with another ?

    Read the article

  • ProFTPd server on Ubuntu getting access denied message when successfully authenticated?

    - by exxoid
    I have a Ubuntu box with a ProFTPD 1.3.4a Server, when I try to log in via my FTP Client I cannot do anything as it does not allow me to list directories; I have tried logging in as root and as a regular user and tried accessing different paths within the FTP Server. The error I get in my FTP Client is: Status: Retrieving directory listing... Command: CDUP Response: 250 CDUP command successful Command: PWD Response: 257 "/var" is the current directory Command: PASV Response: 227 Entering Passive Mode (172,16,4,22,237,205). Command: MLSD Response: 550 Access is denied. Error: Failed to retrieve directory listing Any idea? Here is the config of my proftpd: # # /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file. # To really apply changes, reload proftpd after modifications, if # it runs in daemon mode. It is not required in inetd/xinetd mode. # # Includes DSO modules Include /etc/proftpd/modules.conf # Set off to disable IPv6 support which is annoying on IPv4 only boxes. UseIPv6 off # If set on you can experience a longer connection delay in many cases. IdentLookups off ServerName "Drupal Intranet" ServerType standalone ServerIdent on "FTP Server ready" DeferWelcome on # Set the user and group that the server runs as User nobody Group nogroup MultilineRFC2228 on DefaultServer on ShowSymlinks on TimeoutNoTransfer 600 TimeoutStalled 600 TimeoutIdle 1200 DisplayLogin welcome.msg DisplayChdir .message true ListOptions "-l" DenyFilter \*.*/ # Use this to jail all users in their homes # DefaultRoot ~ # Users require a valid shell listed in /etc/shells to login. # Use this directive to release that constrain. # RequireValidShell off # Port 21 is the standard FTP port. Port 21 # In some cases you have to specify passive ports range to by-pass # firewall limitations. Ephemeral ports can be used for that, but # feel free to use a more narrow range. # PassivePorts 49152 65534 # If your host was NATted, this option is useful in order to # allow passive tranfers to work. You have to use your public # address and opening the passive ports used on your firewall as well. # MasqueradeAddress 1.2.3.4 # This is useful for masquerading address with dynamic IPs: # refresh any configured MasqueradeAddress directives every 8 hours <IfModule mod_dynmasq.c> # DynMasqRefresh 28800 </IfModule> # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 30 # Set the user and group that the server normally runs at. # Umask 022 is a good standard umask to prevent new files and dirs # (second parm) from being group and world writable. Umask 022 022 # Normally, we want files to be overwriteable. AllowOverwrite on # Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords: # PersistentPasswd off # This is required to use both PAM-based authentication and local passwords AuthPAMConfig proftpd AuthOrder mod_auth_pam.c* mod_auth_unix.c # Be warned: use of this directive impacts CPU average load! # Uncomment this if you like to see progress and transfer rate with ftpwho # in downloads. That is not needed for uploads rates. # UseSendFile off TransferLog /var/log/proftpd/xferlog SystemLog /var/log/proftpd/proftpd.log # Logging onto /var/log/lastlog is enabled but set to off by default #UseLastlog on # In order to keep log file dates consistent after chroot, use timezone info # from /etc/localtime. If this is not set, and proftpd is configured to # chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight # savings timezone regardless of whether DST is in effect. #SetEnv TZ :/etc/localtime <IfModule mod_quotatab.c> QuotaEngine off </IfModule> <IfModule mod_ratio.c> Ratios off </IfModule> # Delay engine reduces impact of the so-called Timing Attack described in # http://www.securityfocus.com/bid/11430/discuss # It is on by default. <IfModule mod_delay.c> DelayEngine on </IfModule> <IfModule mod_ctrls.c> ControlsEngine off ControlsMaxClients 2 ControlsLog /var/log/proftpd/controls.log ControlsInterval 5 ControlsSocket /var/run/proftpd/proftpd.sock </IfModule> <IfModule mod_ctrls_admin.c> AdminControlsEngine off </IfModule> # # Alternative authentication frameworks # #Include /etc/proftpd/ldap.conf #Include /etc/proftpd/sql.conf # # This is used for FTPS connections # #Include /etc/proftpd/tls.conf # # Useful to keep VirtualHost/VirtualRoot directives separated # #Include /etc/proftpd/virtuals.con # A basic anonymous configuration, no upload directories. # <Anonymous ~ftp> # User ftp # Group nogroup # # We want clients to be able to login with "anonymous" as well as "ftp" # UserAlias anonymous ftp # # Cosmetic changes, all files belongs to ftp user # DirFakeUser on ftp # DirFakeGroup on ftp # # RequireValidShell off # # # Limit the maximum number of anonymous logins # MaxClients 10 # # # We want 'welcome.msg' displayed at login, and '.message' displayed # # in each newly chdired directory. # DisplayLogin welcome.msg # DisplayChdir .message # # # Limit WRITE everywhere in the anonymous chroot # <Directory *> # <Limit WRITE> # DenyAll # </Limit> # </Directory> # # # Uncomment this if you're brave. # # <Directory incoming> # # # Umask 022 is a good standard umask to prevent new files and dirs # # # (second parm) from being group and world writable. # # Umask 022 022 # # <Limit READ WRITE> # # DenyAll # # </Limit> # # <Limit STOR> # # AllowAll # # </Limit> # # </Directory> # # </Anonymous> # Include other custom configuration files Include /etc/proftpd/conf.d/ UseReverseDNS off <Global> RootLogin on UseFtpUsers on ServerIdent on DefaultChdir /var/www DeleteAbortedStores on LoginPasswordPrompt on AccessGrantMsg "You have been authenticated successfully." </Global> Any idea what could be wrong? Thanks for your help!

    Read the article

  • Unwanted character being added to string in C

    - by Church
    I have a program that gives you shipping addresses from an input file. However at the beginning of one of the strings, order.add_one, a number is being added to the beginning of the string, that number is equivalent to the variable "choice" every time. Why is it doing this? #include <stdio.h> #include <math.h> #include <string.h> //structure typedef struct {char cust_name[25]; char cust_id[3]; char add_one[30]; char add_two[30]; char bike; char risky; int number_ordered; char cust_information[500]; }ORDER; ORDER order; int main(void){ fflush(stdin); system ( "clear" ); //initialize variables float price; float m = 359.95; float s = 279.95; //while loop, runs until user declares they no longer wish to input orders while (1==1){ printf("Options: \nEnter Customer information manually : 1 \nSearch Customer by ID(input.txt reader) : 2 \n"); int option = 0; scanf(" %d", &option); if (option == 1){ //Print and scan statements printf("Enter Customer Information\n"); printf("Customer Name: "); scanf(" %[^\n]s", &order.cust_name); printf("\nEnter Address Line One: "); scanf(" %[^\n]s", &order.add_one); printf("\nEnter Addres Line Two: "); scanf(" %[^\n]s", &order.add_two); printf("\nHow Many Bicycles Are Ordered: "); scanf(" %d", &order.number_ordered); printf("\nWhat Type Of Bike Is Ordered\n M Mountain Bike \n S Street Bike"); printf("\nChoose One (M or S): "); scanf(" %c", &order.bike); printf("\nIs The Customer Risky (Y/N): "); scanf(" %c", &order.risky); system ( "clear" ); } if (option == 2){ FILE *fpt; fpt = fopen("input.txt", "r"); if (fpt==NULL){ printf("Text file did not open\n"); return 1; } printf("Enter Customer ID: "); scanf("%s", &order.cust_id); char choice; choice = order.cust_id[0]; char x[3]; int w, u, y, z; char a[10], b[10], c[10], d[10], e[20], f[10], g[10], i[1], j[1]; int h; printf("%s value of c", c); if (choice >='1'){ while ((w = fgetc(fpt)) != '\n' ){ } } if (choice >='2'){ while ((u = fgetc(fpt)) != '\n' ){ } } if (choice >='3'){ while ((y = fgetc(fpt)) != '\n' ){ } } if (choice >= '4'){ while ((z = fgetc(fpt)) != '\n' ){ } } printf("\n"); fscanf(fpt, "%s", x); fscanf(fpt, "%s", a); printf("%s", a); strcat(order.cust_name, a); fscanf(fpt, " %s", b); printf(" %s", b); strcat(order.cust_name, " "); strcat(order.cust_name, b); fscanf(fpt, "%s", c); printf(" %s", c); strcat(order.add_one, "\0"); strcat(order.add_one, c); fscanf(fpt, "%s", d); printf(" %s", d); strcat(order.add_one, " "); strcat(order.add_one, d); fscanf(fpt, "%s", e); printf(" %s", e); strcat(order.add_two, e); fscanf(fpt, "%s", f); printf(" %s", f); strcat(order.add_two, " "); strcat(order.add_two, f); fscanf(fpt, "%s", g); printf(" %s", g); strcat(order.add_two, " "); strcat(order.add_two, g); strcat(order.add_two, "\0"); fscanf(fpt, "%d", &h); printf(" %d", h); order.number_ordered = h; fscanf(fpt, "%s", i); printf(" %s", i); order.bike = i[0]; fscanf(fpt, "%s", j); printf(" %s", j); order.risky = j[0]; fclose(fpt); printf("%s %s %s %d %c %c", order.cust_name, order.add_one, order.add_two, order.number_ordered, order.bike, order.risky); }

    Read the article

  • OpenLDAP and SSL

    - by Stormshadow
    I am having trouble trying to connect to a secure OpenLDAP server which I have set up. On running my LDAP client code java -Djavax.net.debug=ssl LDAPConnector I get the following exception trace (java version 1.6.0_17) trigger seeding of SecureRandom done seeding SecureRandom %% No cached client session *** ClientHello, TLSv1 RandomCookie: GMT: 1256110124 bytes = { 224, 19, 193, 148, 45, 205, 108, 37, 101, 247, 112, 24, 157, 39, 111, 177, 43, 53, 206, 224, 68, 165, 55, 185, 54, 203, 43, 91 } Session ID: {} Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_W ITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SH A, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA] Compression Methods: { 0 } *** Thread-0, WRITE: TLSv1 Handshake, length = 73 Thread-0, WRITE: SSLv2 client hello message, length = 98 Thread-0, received EOFException: error Thread-0, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake Thread-0, SEND TLSv1 ALERT: fatal, description = handshake_failure Thread-0, WRITE: TLSv1 Alert, length = 2 Thread-0, called closeSocket() main, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake javax.naming.CommunicationException: simple bind failed: ldap.natraj.com:636 [Root exception is javax.net.ssl.SSLHandshakeException: Remote host closed connection during hands hake] at com.sun.jndi.ldap.LdapClient.authenticate(Unknown Source) at com.sun.jndi.ldap.LdapCtx.connect(Unknown Source) at com.sun.jndi.ldap.LdapCtx.<init>(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(Unknown Source) at javax.naming.spi.NamingManager.getInitialContext(Unknown Source) at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source) at javax.naming.InitialContext.init(Unknown Source) at javax.naming.InitialContext.<init>(Unknown Source) at javax.naming.directory.InitialDirContext.<init>(Unknown Source) at LDAPConnector.CallSecureLDAPServer(LDAPConnector.java:43) at LDAPConnector.main(LDAPConnector.java:237) Caused by: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source) at java.io.BufferedInputStream.fill(Unknown Source) at java.io.BufferedInputStream.read1(Unknown Source) at java.io.BufferedInputStream.read(Unknown Source) at com.sun.jndi.ldap.Connection.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: java.io.EOFException: SSL peer shut down incorrectly at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source) ... 9 more I am able to connect to the same secure LDAP server however if I use another version of java (1.6.0_14) I have created and installed the server certificates in the cacerts of both the JRE's as mentioned in this guide -- OpenLDAP with SSL When I run ldapsearch -x on the server I get # extended LDIF # # LDAPv3 # base <dc=localdomain> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # localdomain dn: dc=localdomain objectClass: top objectClass: dcObject objectClass: organization o: localdomain dc: localdomain # admin, localdomain dn: cn=admin,dc=localdomain objectClass: simpleSecurityObject objectClass: organizationalRole cn: admin description: LDAP administrator # search result search: 2 result: 0 Success # numResponses: 3 # numEntries: 2 On running openssl s_client -connect ldap.natraj.com:636 -showcerts , I obtain the self signed certificate. My slapd.conf file is as follows ####################################################################### # Global Directives: # Features to permit #allow bind_v2 # Schema and objectClass definitions include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/inetorgperson.schema # Where the pid file is put. The init.d script # will not stop the server if you change this. pidfile /var/run/slapd/slapd.pid # List of arguments that were passed to the server argsfile /var/run/slapd/slapd.args # Read slapd.conf(5) for possible values loglevel none # Where the dynamically loaded modules are stored modulepath /usr/lib/ldap moduleload back_hdb # The maximum number of entries that is returned for a search operation sizelimit 500 # The tool-threads parameter sets the actual amount of cpu's that is used # for indexing. tool-threads 1 ####################################################################### # Specific Backend Directives for hdb: # Backend specific directives apply to this backend until another # 'backend' directive occurs backend hdb ####################################################################### # Specific Backend Directives for 'other': # Backend specific directives apply to this backend until another # 'backend' directive occurs #backend <other> ####################################################################### # Specific Directives for database #1, of type hdb: # Database specific directives apply to this databasse until another # 'database' directive occurs database hdb # The base of your directory in database #1 suffix "dc=localdomain" # rootdn directive for specifying a superuser on the database. This is needed # for syncrepl. rootdn "cn=admin,dc=localdomain" # Where the database file are physically stored for database #1 directory "/var/lib/ldap" # The dbconfig settings are used to generate a DB_CONFIG file the first # time slapd starts. They do NOT override existing an existing DB_CONFIG # file. You should therefore change these settings in DB_CONFIG directly # or remove DB_CONFIG and restart slapd for changes to take effect. # For the Debian package we use 2MB as default but be sure to update this # value if you have plenty of RAM dbconfig set_cachesize 0 2097152 0 # Sven Hartge reported that he had to set this value incredibly high # to get slapd running at all. See http://bugs.debian.org/303057 for more # information. # Number of objects that can be locked at the same time. dbconfig set_lk_max_objects 1500 # Number of locks (both requested and granted) dbconfig set_lk_max_locks 1500 # Number of lockers dbconfig set_lk_max_lockers 1500 # Indexing options for database #1 index objectClass eq # Save the time that the entry gets modified, for database #1 lastmod on # Checkpoint the BerkeleyDB database periodically in case of system # failure and to speed slapd shutdown. checkpoint 512 30 # Where to store the replica logs for database #1 # replogfile /var/lib/ldap/replog # The userPassword by default can be changed # by the entry owning it if they are authenticated. # Others should not be able to see it, except the # admin entry below # These access lines apply to database #1 only access to attrs=userPassword,shadowLastChange by dn="cn=admin,dc=localdomain" write by anonymous auth by self write by * none # Ensure read access to the base for things like # supportedSASLMechanisms. Without this you may # have problems with SASL not knowing what # mechanisms are available and the like. # Note that this is covered by the 'access to *' # ACL below too but if you change that as people # are wont to do you'll still need this if you # want SASL (and possible other things) to work # happily. access to dn.base="" by * read # The admin dn has full write access, everyone else # can read everything. access to * by dn="cn=admin,dc=localdomain" write by * read # For Netscape Roaming support, each user gets a roaming # profile for which they have write access to #access to dn=".*,ou=Roaming,o=morsnet" # by dn="cn=admin,dc=localdomain" write # by dnattr=owner write ####################################################################### # Specific Directives for database #2, of type 'other' (can be hdb too): # Database specific directives apply to this databasse until another # 'database' directive occurs #database <other> # The base of your directory for database #2 #suffix "dc=debian,dc=org" ####################################################################### # SSL: # Uncomment the following lines to enable SSL and use the default # snakeoil certificates. #TLSCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem #TLSCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key TLSCipherSuite TLS_RSA_AES_256_CBC_SHA TLSCACertificateFile /etc/ldap/ssl/server.pem TLSCertificateFile /etc/ldap/ssl/server.pem TLSCertificateKeyFile /etc/ldap/ssl/server.pem My ldap.conf file is # # LDAP Defaults # # See ldap.conf(5) for details # This file should be world readable but not world writable. HOST ldap.natraj.com PORT 636 BASE dc=localdomain URI ldaps://ldap.natraj.com TLS_CACERT /etc/ldap/ssl/server.pem TLS_REQCERT allow #SIZELIMIT 12 #TIMELIMIT 15 #DEREF never

    Read the article

< Previous Page | 1 2 3 4