Search Results

Search found 267 results on 11 pages for 'pae'.

Page 4/11 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11  | Next Page >

• IBM HS23 Blade Server (7875) onboard NIC driver for linux

  - by Igor Spivak

  I work with IBM HS23 Blade Server (7875). It's onboard NIC adapter is: Emulex OCl11104-F-X Virtual Fabric Adapter 2-port 10GB and 2-port 1GB LOM . I'm tryed to the following Linux OS with the server: 2.6.32-22-generic-pae #36-Ubuntu SMP. and discovered my OS has not proper Network drive installed (for the NIC adapter described above). After investigation I made, I discovered that the driver I need is "be2net" placed in "net" directory of the linux under the folder "be2net". I managed to download this driver with the latest package for my kernel. Driver info ("modinfo be2net" result) is as follows: --------------------------------------------------------------------------------------- filename: /lib/modules/2.6.32-22-generic-pae/kernel/drivers/net/benet/be2net.ko license: GPL author: ServerEngines Corporation description: ServerEngines BladeEngine2 10Gbps NICDriver 2.101.205 version: 2.101.205 srcversion: 199ADD251CB874C3727CC47 alias: pci:v000019A2d00000710sv*sd*bc*sc*i* alias: pci:v000019A2d00000701sv*sd*bc*sc*i* alias: pci:v000019A2d00000700sv*sd*bc*sc*i* alias: pci:v000019A2d00000221sv*sd*bc*sc*i* alias: pci:v000019A2d00000211sv*sd*bc*sc*i* depends: vermagic: 2.6.32-22-generic-pae SMP mod_unload modversions 586TSC parm: rx_frag_size:Size of a fragment that holds rcvd data. (uint) --------------------------------------------------------------------------------------- After starting linux, I get the following error: be2net 0000:16:00.x: Emulex OneConnect 10Gbps NIC (be3) initilization failed. I checked the same server with another Linux version (Red-Had 5.5.1.0) and the NICs worked properly, so seems there is no problem in HW. Also, on IBM or Emulex offical sites I managed to find drivers only for Red-Had and SUSE versions.

  Read the article

• How to solve High Load average issue in Linux systems?

  - by RoCkStUnNeRs

  The following is the different load with cpu time in different time limit . The below output has parsed from the top command. TIME LOAD US SY NICE ID WA HI SI ST 12:02:27 208.28 4.2%us 1.0%sy 0.2%ni 93.9%id 0.7%wa 0.0%hi 0.0%si 0.0%st 12:23:22 195.48 4.2%us 1.0%sy 0.2%ni 93.9%id 0.7%wa 0.0%hi 0.0%si 0.0%st 12:34:55 199.15 4.2%us 1.0%sy 0.2%ni 93.9%id 0.7%wa 0.0%hi 0.0%si 0.0%st 13:41:50 203.66 4.2%us 1.0%sy 0.2%ni 93.8%id 0.8%wa 0.0%hi 0.0%si 0.0%st 13:42:58 278.63 4.2%us 1.0%sy 0.2%ni 93.8%id 0.8%wa 0.0%hi 0.0%si 0.0%st Following is the additional Information of the system? cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4658.69 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 4 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4655.00 clflush size : 64 power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 4 apicid : 2 initial apicid : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4655.00 clflush size : 64 power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 3 cpu cores : 4 apicid : 3 initial apicid : 3 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4654.99 clflush size : 64 power management: Memory: total used free shared buffers cached Mem: 2 1 1 0 0 0 Swap: 5 0 5 let me know why the system is getting abnormally this much high load?

  Read the article

• Upgrading from 12.10 to 13.04 -> dpkg: error processing sudo (--configure)

  - by Korrigan Nagirrok

  Here's the deal and reason I'm asking for your help. Last night I went on upgrading my Xubuntu 12.10 installation to 13.04, so at tty1 I run the command sudo do-release-upgrade and everything seemed to went well except that after rebooting and when I run sudo apt-get update && sudo apt-get upgrade I get this error: sudo apt-get update && sudo apt-get upgrade Hit http://pt.archive.ubuntu.com raring Release.gpg Hit http://pt.archive.ubuntu.com raring-updates Release.gpg Hit http://dl.google.com stable Release.gpg Hit http://pt.archive.ubuntu.com raring-backports Release.gpg Hit http://pt.archive.ubuntu.com raring Release Hit http://archive.canonical.com raring Release.gpg Hit http://ppa.launchpad.net raring Release.gpg Hit http://pt.archive.ubuntu.com raring-updates Release Hit http://extras.ubuntu.com raring Release.gpg Hit http://pt.archive.ubuntu.com raring-backports Release Hit http://dl.google.com stable Release Hit http://pt.archive.ubuntu.com raring/main Sources Hit http://pt.archive.ubuntu.com raring/restricted Sources Hit http://extras.ubuntu.com raring Release Hit http://archive.canonical.com raring Release Hit http://ppa.launchpad.net raring Release.gpg Hit http://pt.archive.ubuntu.com raring/universe Sources Hit http://pt.archive.ubuntu.com raring/multiverse Sources Hit http://dl.google.com stable/main i386 Packages Get:1 http://security.ubuntu.com raring-security Release.gpg [933 B] Hit http://pt.archive.ubuntu.com raring/main i386 Packages Hit http://extras.ubuntu.com raring/main Sources Hit http://ppa.launchpad.net raring Release Hit http://archive.canonical.com raring/partner i386 Packages Hit http://pt.archive.ubuntu.com raring/restricted i386 Packages Hit http://pt.archive.ubuntu.com raring/universe i386 Packages Hit http://extras.ubuntu.com raring/main i386 Packages Hit http://pt.archive.ubuntu.com raring/multiverse i386 Packages Hit http://ppa.launchpad.net raring Release Hit http://pt.archive.ubuntu.com raring/main Translation-en Hit http://ppa.launchpad.net raring/main Sources Hit http://ppa.launchpad.net raring/main i386 Packages Hit http://pt.archive.ubuntu.com raring/multiverse Translation-en Hit http://pt.archive.ubuntu.com raring/restricted Translation-en Hit http://pt.archive.ubuntu.com raring/universe Translation-en Hit http://pt.archive.ubuntu.com raring-updates/main Sources Hit http://pt.archive.ubuntu.com raring-updates/restricted Sources Hit http://ppa.launchpad.net raring/main Sources Hit http://pt.archive.ubuntu.com raring-updates/universe Sources Hit http://pt.archive.ubuntu.com raring-updates/multiverse Sources Hit http://pt.archive.ubuntu.com raring-updates/main i386 Packages Hit http://ppa.launchpad.net raring/main i386 Packages Hit http://pt.archive.ubuntu.com raring-updates/restricted i386 Packages Hit http://pt.archive.ubuntu.com raring-updates/universe i386 Packages Hit http://pt.archive.ubuntu.com raring-updates/multiverse i386 Packages Ign http://dl.google.com stable/main Translation-en_US Hit http://pt.archive.ubuntu.com raring-updates/main Translation-en Ign http://archive.canonical.com raring/partner Translation-en_US Ign http://extras.ubuntu.com raring/main Translation-en_US Ign http://dl.google.com stable/main Translation-en Ign http://archive.canonical.com raring/partner Translation-en Hit http://pt.archive.ubuntu.com raring-updates/multiverse Translation-en Ign http://extras.ubuntu.com raring/main Translation-en Hit http://pt.archive.ubuntu.com raring-updates/restricted Translation-en Hit http://pt.archive.ubuntu.com raring-updates/universe Translation-en Hit http://pt.archive.ubuntu.com raring-backports/main Sources Hit http://pt.archive.ubuntu.com raring-backports/restricted Sources Hit http://pt.archive.ubuntu.com raring-backports/universe Sources Hit http://pt.archive.ubuntu.com raring-backports/multiverse Sources Hit http://pt.archive.ubuntu.com raring-backports/main i386 Packages Hit http://pt.archive.ubuntu.com raring-backports/restricted i386 Packages Hit http://pt.archive.ubuntu.com raring-backports/universe i386 Packages Hit http://pt.archive.ubuntu.com raring-backports/multiverse i386 Packages Hit http://pt.archive.ubuntu.com raring-backports/main Translation-en Hit http://pt.archive.ubuntu.com raring-backports/multiverse Translation-en Get:2 http://security.ubuntu.com raring-security Release [40.8 kB] Hit http://pt.archive.ubuntu.com raring-backports/restricted Translation-en Hit http://pt.archive.ubuntu.com raring-backports/universe Translation-en Ign http://ppa.launchpad.net raring/main Translation-en_US Ign http://ppa.launchpad.net raring/main Translation-en Get:3 http://security.ubuntu.com raring-security/main Sources [2,109 B] Ign http://ppa.launchpad.net raring/main Translation-en_US Ign http://ppa.launchpad.net raring/main Translation-en Get:4 http://security.ubuntu.com raring-security/restricted Sources [14 B] Get:5 http://security.ubuntu.com raring-security/universe Sources [14 B] Get:6 http://security.ubuntu.com raring-security/multiverse Sources [14 B] Get:7 http://security.ubuntu.com raring-security/main i386 Packages [3,670 B] Get:8 http://security.ubuntu.com raring-security/restricted i386 Packages [14 B] Get:9 http://security.ubuntu.com raring-security/universe i386 Packages [2,824 B] Get:10 http://security.ubuntu.com raring-security/multiverse i386 Packages [14 B] Ign http://pt.archive.ubuntu.com raring/main Translation-en_US Ign http://pt.archive.ubuntu.com raring/multiverse Translation-en_US Ign http://pt.archive.ubuntu.com raring/restricted Translation-en_US Ign http://pt.archive.ubuntu.com raring/universe Translation-en_US Ign http://pt.archive.ubuntu.com raring-updates/main Translation-en_US Ign http://pt.archive.ubuntu.com raring-updates/multiverse Translation-en_US Hit http://security.ubuntu.com raring-security/main Translation-en Ign http://pt.archive.ubuntu.com raring-updates/restricted Translation-en_US Ign http://pt.archive.ubuntu.com raring-updates/universe Translation-en_US Ign http://pt.archive.ubuntu.com raring-backports/main Translation-en_US Ign http://pt.archive.ubuntu.com raring-backports/multiverse Translation-en_US Ign http://pt.archive.ubuntu.com raring-backports/restricted Translation-en_US Hit http://security.ubuntu.com raring-security/multiverse Translation-en Ign http://pt.archive.ubuntu.com raring-backports/universe Translation-en_US Hit http://security.ubuntu.com raring-security/restricted Translation-en Hit http://security.ubuntu.com raring-security/universe Translation-en Ign http://security.ubuntu.com raring-security/main Translation-en_US Ign http://security.ubuntu.com raring-security/multiverse Translation-en_US Ign http://security.ubuntu.com raring-security/restricted Translation-en_US Ign http://security.ubuntu.com raring-security/universe Translation-en_US Fetched 50.4 kB in 6s (7,454 B/s) Reading package lists... Done Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. Need to get 0 B/373 kB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y dpkg: error processing sudo (--configure): Package is in a very bad inconsistent state - you should reinstall it before attempting configuration. No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of ubuntu-minimal: ubuntu-minimal depends on sudo; however: Package sudo is not configured yet. dpkg: error processing ubuntu-minimal (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: sudo ubuntu-minimal E: Sub-process /usr/bin/dpkg returned an error code (1) I've tried everything I thought logical, like sudo dpkg --configure -a dpkg: error processing sudo (--configure): Package is in a very bad inconsistent state - you should reinstall it before attempting configuration. dpkg: dependency problems prevent configuration of ubuntu-minimal: ubuntu-minimal depends on sudo; however: Package sudo is not configured yet. dpkg: error processing ubuntu-minimal (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: sudo ubuntu-minimal sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. Need to get 0 B/373 kB of archives. After this operation, 0 B of additional disk space will be used. dpkg: error processing sudo (--configure): Package is in a very bad inconsistent state - you should reinstall it before attempting configuration. dpkg: dependency problems prevent configuration of ubuntu-minimal: ubuntu-minimal depends on sudo; however: Package sudo is not configured yet. dpkg: error processing ubuntu-minimal (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already Errors were encountered while processing: sudo ubuntu-minimal E: Sub-process /usr/bin/dpkg returned an error code (1) Can someone help me, please. Edit: Here's some more info that could be of help for anyone. The output of apt-cache policy linux-image-generic-pae linux-generic-pae is linux-image-generic-pae: Installed: (none) Candidate: 3.8.0.19.35 Version table: 3.8.0.19.35 0 500 http://pt.archive.ubuntu.com/ubuntu/ raring/main i386 Packages linux-generic-pae: Installed: (none) Candidate: 3.8.0.19.35 Version table: 3.8.0.19.35 0 500 http://pt.archive.ubuntu.com/ubuntu/ raring/main i386 Packages

  Read the article

• apt-get upgrade stuck at the same package

  - by decibyte

  Current status I've started to suspect this is not an Ubuntu issue, but related to the internet connection here at my work. Until I'm sure, Im leaving my question below: Original question I'm stuck, can't upgrade my system. Running sudo apt-get upgrade gives me the following: mmm@alalunga:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: ginn libgrip0 linux-generic-pae linux-headers-generic-pae linux-image-generic-pae The following packages will be upgraded: apport apport-gtk bind9-host build-essential dhcp3-client dhcp3-common dnsutils eog evince evince-common firefox firefox-branding firefox-dbg firefox-globalmenu firefox-gnome-support firefox-locale-en gimp gimp-data gir1.2-totem-1.0 glib-networking glib-networking-common glib-networking-services gnupg gpgv icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-6-plugin icedtea-netx icedtea-netx-common icedtea-plugin isc-dhcp-client isc-dhcp-common libapache2-mod-php5 libart-2.0-2 libbind9-80 libdns81 libevince3-3 libgimp2.0 libisc83 libisccc80 libisccfg82 liblwres80 libssl-dev libssl-doc libssl1.0.0 libtotem0 linux-firmware linux-libc-dev openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib openssl php-pear php5-cli php5-common php5-curl php5-dev php5-gd php5-mysql php5-xsl policykit-1-gnome python-apport python-django python-gst0.10 python-problem-report resolvconf thunderbird thunderbird-globalmenu thunderbird-gnome-support totem totem-common totem-mozilla totem-plugins xserver-xorg-input-synaptics 74 upgraded, 0 newly installed, 0 to remove and 5 not upgraded. Need to get 317 MB/327 MB of archives. After this operation, 1.481 kB of additional disk space will be used. Do you want to continue [Y/n]? Get:1 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:2 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:3 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:4 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:5 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:6 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:7 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] 9% [7 openjdk-6-jre-headless 27,3 MB/27,3 MB 100%] It keeps downloading the package openjdk-6-jre-headless, then does nothing for a while (hanging on what's the last line above), then download the package again. It's at its 13th download attempt at the moment of writing. The actual downloads seem to be done just fine, but whatever it does after downloading seems to be failing. I tried removing openjdk-6, but then it wanted to install openjdk-7 instead, with the same result, hanging at openjdk-7-jre-headless instead. I also tried changing servers from my local (Danish) to the main server. No luck. It's also keeping me from upgrading alle the other packages. What to do? Update After following instructions in the answer by @lpanebr, it is now stuck at the linux-firmware package. So, maybe it's a more general problem than being related to specific package(s)? Although it did download some packages without problems before getting stuck at linux-firmware.

  Read the article

• Removing padding from structure in kernel module

  - by dexkid

  I am compiling a kernel module, containing a structure of size 34, using the standard command. make -C /lib/modules/$(KVERSION)/build M=$(PWD) modules The sizeof(some_structure) is coming as 36 instead of 34 i.e. the compiler is padding the structure. How do I remove this padding? Running make V=1 shows the gcc compiler options passed as make -I../inc -C /lib/modules/2.6.29.4-167.fc11.i686.PAE/build M=/home/vishal/20100426_eth_vishal/organised_eth/src modules make[1]: Entering directory `/usr/src/kernels/2.6.29.4-167.fc11.i686.PAE' test -e include/linux/autoconf.h -a -e include/config/auto.conf || ( \ echo; \ echo " ERROR: Kernel configuration is invalid."; \ echo " include/linux/autoconf.h or include/config/auto.conf are missing."; \ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo; \ /bin/false) mkdir -p /home/vishal/20100426_eth_vishal/organised_eth/src/.tmp_versions ; rm -f /home/vishal/20100426_eth_vishal/organised_eth/src/.tmp_versions/* make -f scripts/Makefile.build obj=/home/vishal/20100426_eth_vishal/organised_eth/src gcc -Wp,-MD,/home/vishal/20100426_eth_vishal/organised_eth/src/.eth_main.o.d -nostdinc -isystem /usr/lib/gcc/i586-redhat-linux/4.4.0/include -Iinclude -I/usr/src/kernels/2.6.29.4-167.fc11.i686.PAE/arch/x86/include -include include/linux/autoconf.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Os -m32 -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -march=i686 -mtune=generic -Wa,-mtune=generic32 -ffreestanding -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Iarch/x86/include/asm/mach-generic -Iarch/x86/include/asm/mach-default -Wframe-larger-than=1024 -fno-stack-protector -fno-omit-frame-pointer -fno-optimize-sibling-calls -g -pg -Wdeclaration-after-statement -Wno-pointer-sign -fwrapv -fno-dwarf2-cfi-asm -DTX_DESCRIPTOR_IN_SYSTEM_MEMORY -DRX_DESCRIPTOR_IN_SYSTEM_MEMORY -DTX_BUFFER_IN_SYSTEM_MEMORY -DRX_BUFFER_IN_SYSTEM_MEMORY -DALTERNATE_DESCRIPTORS -DEXT_8_BYTE_DESCRIPTOR -O0 -Wall -DT_ETH_1588_051 -DALTERNATE_DESCRIPTORS -DEXT_8_BYTE_DESCRIPTOR -DNETHERNET_INTERRUPTS -DETH_IEEE1588_TESTS -DSNAPTYPSEL_TMSTRENA_TEVENTENA_TESTS -DT_ETH_1588_140_147 -DLOW_DEBUG_PRINTS -DMEDIUM_DEBUG_PRINTS -DHIGH_DEBUG_PRINTS -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(eth_main)" -D"KBUILD_MODNAME=KBUILD_STR(conxt_eth)" -c -o /home/vishal/20100426_eth_vishal/organised_eth/src/eth_main.o /home/vishal/20100426_eth_vishal/organised_eth/src/eth_main.c

  Read the article

• como se que esta funcionando AWE?

  - by adan851018

  Tengo un servidor con 8GB de RAM de 32 bits, instale windows server 2003 enterprise y sql server 2005 enterprise, el Sistema Operativo reconoce los 8GB, pero el Sql Server solo usaba 1.6 GB de memoria, entonces agregue al boot.ini el parametro /PAE y en Sql Server le habilite AWE de 1GB a 5GB, despues de reiniciar el servidor el Sistema que usa la BD estaba mas rapido mejoro bastante, pero en memoria el Sql Server solo usa 100 MB, veo la cantidad de memoria usada en el Administrador de Tareas de Windows, y no se si esta funcionando AWE o que sucedio? Rough translation: I have a server with 8GB of RAM 32-bit, install windows server 2003 enterprise and sql server 2005 enterprise, the operating system recognizes the 8GB, but the SQL Server only using 1.6 GB of memory, then add to boot.ini the parameter / PAE and will enable AWE Sql Server 1GB to 5GB, after rebooting the server using the database system was faster, the better lot, but in memory the SQL Server only uses 100 MB, I see the amount of memory used in Manager Windows Tasks, and not if AWE is running or what happened?

  Read the article

• Terminal Server 2003 Performance Troubleshooting

  - by MikeM

  Let me get your thoughts on terminal server performance problems. The server hosts average 25 users which, after running some numbers, on average use 600MB memory with their main applications running (web browser, adobe reader, IP phone client). All users are on the same LAN as server. We constantly experience slow response and short session lockups. Combined CPU usage is on average 10%. What appears strange to me is that the system shows 29GB physical memory with 25GB of it free. The page file usage is about 50% averaging 9GB used. Some server specs OS: Server 2003 32bit Enterprise with /PAE flag RAM: 32GB CPU: 2xQuad Core @ 2.27Ghz HD: RAID5 1.2GB After doing basic troubleshooting using performance monitor it leads me to believe that the performance problems are caused by the 32bit OS limitation in addressing full 32GB of physical memory even though the /PAE flag is used. Can anyone suggest something, troubleshooting steps that can lead to a more conclusive answer? Thanks

  Read the article

• Sporadic unspecific kernel panic

  - by koma

  I'm experiencing seldom (so far about once a month) hard crashes on our ubuntu server 10.04 LTS box. The box itself is quite old (Dell PowerEdge 750 from 2004, Pentium4 2.8 GHz). I set up netconsole after it crashed twice last thursday and was able to extract the following output: [ 9354.062473] invalid opcode: 0000 [#1] SMP [ 9354.062516] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/uevent [ 9354.062555] Modules linked in: ppdev adm1026 hwmon_vid i2c_i801 bridge stp dcdbas psmouse serio_raw netconsole configfs shpchp lp parport usbhid hid e1000 [ 9354.062685] [ 9354.062704] Pid: 3988, comm: rsync Not tainted 2.6.38-12-generic-pae #51~lucid1-Ubuntu Dell Computer Corporation PowerEdge 750 /0R1479 [ 9354.062773] EIP: 0060:[<c104fef1>] EFLAGS: 00010046 CPU: 1 [ 9354.062802] EIP is at check_preempt_wakeup+0x181/0x250 [ 9354.062826] EAX: 00000002 EBX: f2a10ccc ECX: 00000000 EDX: 00000002 [ 9354.062850] ESI: f1db71cc EDI: f1db71a0 EBP: f1dbdea8 ESP: f1dbde8c [ 9354.062875] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 9354.062900] Process rsync (pid: 3988, ti=f1dbc000 task=f1db71a0 task.ti=f1dbc000) [ 9354.062933] Stack: [ 9354.062951] 0053ea60 f7907680 f28da840 f2a10ca0 c153ea60 f7907680 c153ea60 f1dbdebc [ 9354.063019] c103f98a f2a10ca0 f7907680 00000001 f1dbdef8 c104f97f 00000000 f2f0bacc [ 9354.063088] f7904338 00000001 00000003 00000000 f2f0bacc 00000001 00000001 00000086 [ 9354.063157] Call Trace: [ 9354.063183] [<c103f98a>] check_preempt_curr+0x6a/0x80 [ 9354.063210] [<c104f97f>] try_to_wake_up+0x5f/0x3f0 [ 9354.063236] [<c1077a00>] ? hrtimer_wakeup+0x0/0x30 [ 9354.063261] [<c104fd64>] wake_up_process+0x14/0x20 [ 9354.063286] [<c1077a1d>] hrtimer_wakeup+0x1d/0x30 [ 9354.063310] [<c1077f4a>] __run_hrtimer+0x7a/0x1c0 [ 9354.063336] [<c107dbad>] ? ktime_get+0x6d/0x110 [ 9354.063360] [<c1078310>] hrtimer_interrupt+0x120/0x2b0 [ 9354.063390] [<c1535c36>] smp_apic_timer_interrupt+0x56/0x8a [ 9354.063418] [<c152f459>] apic_timer_interrupt+0x31/0x38 [ 9354.063446] [<c1520000>] ? mca_attach_bus+0x5/0xc0 [ 9354.063469] Code: 8b 9b 20 01 00 00 8b 86 24 01 00 00 3b 83 24 01 00 00 75 e6 85 db 0f 84 a3 00 00 00 89 da 89 f0 e8 75 f6 fe ff 83 f8 01 0f 85 00 <fe> ff ff 89 f8 e8 95 f9 fe ff 8b 5e 1c 85 db 0f 84 e4 fe ff ff [ 9354.063804] EIP: [<c104fef1>] check_preempt_wakeup+0x181/0x250 SS:ESP 0068:f1dbde8c [ 9354.064231] ---[ end trace 290689cea65aea7f ]--- [ 9354.064290] Kernel panic - not syncing: Fatal exception in interrupt [ 9354.064352] Pid: 3988, comm: rsync Tainted: G D 2.6.38-12-generic-pae #51~lucid1-Ubuntu [ 9354.064424] Call Trace: [ 9354.064481] [<c152c057>] ? panic+0x5c/0x15b [ 9354.064539] [<c15302bd>] ? oops_end+0xcd/0xd0 [ 9354.064539] [<c100d9e4>] ? die+0x54/0x80 [ 9354.064539] [<c152f926>] ? do_trap+0x96/0xc0 [ 9354.064539] [<c100ba00>] ? do_invalid_op+0x0/0xa0 [ 9354.064539] [<c100ba8b>] ? do_invalid_op+0x8b/0xa0 [ 9354.064539] [<c104fef1>] ? check_preempt_wakeup+0x181/0x250 [ 9354.064539] [<c144884d>] ? __kfree_skb+0x3d/0x90 [ 9354.064539] [<c1042ae7>] ? update_curr+0x247/0x2a0 [ 9354.064539] [<c10447bb>] ? update_cfs_load+0x11b/0x2d0 [ 9354.064539] [<c1042a25>] ? update_curr+0x185/0x2a0 [ 9354.064539] [<c152f6bf>] ? error_code+0x67/0x6c [ 9354.064539] [<c104fef1>] ? check_preempt_wakeup+0x181/0x250 [ 9354.064539] [<c103f98a>] ? check_preempt_curr+0x6a/0x80 [ 9354.064539] [<c104f97f>] ? try_to_wake_up+0x5f/0x3f0 [ 9354.064539] [<c1077a00>] ? hrtimer_wakeup+0x0/0x30 [ 9354.064539] [<c104fd64>] ? wake_up_process+0x14/0x20 [ 9354.064539] [<c1077a1d>] ? hrtimer_wakeup+0x1d/0x30 [ 9354.064539] [<c1077f4a>] ? __run_hrtimer+0x7a/0x1c0 [ 9354.064539] [<c107dbad>] ? ktime_get+0x6d/0x110 [ 9354.064539] [<c1078310>] ? hrtimer_interrupt+0x120/0x2b0 [ 9354.064539] [<c1535c36>] ? smp_apic_timer_interrupt+0x56/0x8a [ 9354.064539] [<c152f459>] ? apic_timer_interrupt+0x31/0x38 [ 9354.064539] [<c1520000>] ? mca_attach_bus+0x5/0xc0 Googling for this issue didn't really turn up anything useful (most stuff I found was related to btrfs, but I don't use that, although the module exists and is sometimes loaded). From experience it might have to do with relatively heavy I/O, as two of the panics happened during a backup procedure. Kernel is 2.6.38-12-generic-pae, but I'm pretty sure I also saw panics on 2.6.32. I meanwhile upgraded to 3.0.0-17-generic-pae and am waiting for the next crash ;-) I'm at a loss here, so any pointers where to look for the cause or what it could be would be great :-) Thanks !

  Read the article

• Gnome-Network-Manager Config File Migration

  - by Jorge

  I think I have an issue with gnome-network-manager, I used to have a lot of connections configured, Wireless, Wired and VPN. After upgrading to 12.04 (from 11.10) I lost every configuration. I realized that the configs that used to be saved in $HOME/.gconf/system/networking/connections now are being saved in /etc/NetworkManager/system-connections/. I don't know how to migrate my settings to the new config file format Can anybody help me? jorge@thinky:~$ sudo lshw -C network *-network description: Ethernet interface product: 82566MM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:1f:e2:14:5a:9b capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k firmware=0.3-0 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:fe000000-fe01ffff memory:fe025000-fe025fff ioport:1840(size=32) *-network description: Wireless interface product: PRO/Wireless 4965 AG or AGN [Kedron] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 61 serial: 00:21:5c:32:c2:e5 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl4965 driverversion=3.2.0-23-generic-pae firmware=228.61.2.24 ip=192.168.2.103 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:47 memory:df3fe000-df3fffff jorge@thinky:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise jorge@thinky:~$ uname -a Linux thinky 3.2.0-23-generic-pae #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012 i686 i686 i386 GNU/Linux jorge@thinky:~$ dpkg -l | grep -i firm ii linux-firmware 1.79 Firmware for Linux kernel drivers

  Read the article

• My processor is not detected intel core 2 duo

  - by walid

  My processor is not detected intel core 2 duo When I type $uname -m -p I get this i686 unknown I have Ubuntu 10.10 netbook remix but the cat /proc/cpuinfo gives right identification of two processors as below processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping : 6 cpu MHz : 1826.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow bogomips : 3657.99 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping : 6 cpu MHz : 1826.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow bogomips : 3657.53 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: The problem is with programs that uses more than one core like virtualbox and bitcoin which refuses to use more than one core Is there anythign wrong or anything that I can do? My installation is from a live usb iso on a USB

  Read the article

• ATI Radeon HD 6870 Driver fails to install default-policy.sh does not support version

  - by Rogue Coder

  I'm running Ubuntu 11.04 Beta, with everything updated completely. I'm using Ubuntu Classic, because Unity fails to run, supposedly because of my video card. The drivers for the Radeon HD 6870 series is apparently lacking, but I found a post stating the newest version has full support for Ubuntu Natty Narwhal. That post is slightly old, so i grabbed 11.3 for Ubuntu x86 off the ATI website. When I run the installation program, I receive the following error: > ./ati-driver-installer-11-3-x86.x86_64.run Created directory fglrx-install.uREFoO Verifying archive integrity... All good. Uncompressing ATI Catalyst(TM) Proprietary Driver-8.831.2......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... ===================================================================== ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager ===================================================================== Error: ./default_policy.sh does not support version default:v2:i686:lib::none:2.6.38-8-generic-pae:; make sure that the version is being correctly set by --iscurrentdistro ===================================================================== ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager ===================================================================== Error: ./default_policy.sh does not support version default:v2:i686:lib::none:2.6.38-8-generic-pae:; make sure that the version is being correctly set by --iscurrentdistro Removing temporary directory: fglrx-install.uREFoO > I would love to get the latest ATI drivers working so that I can try out Unity!

  Read the article

• Can't get Wireless to work! (Fujitsu siemens ESPRIMO Mobile u9200) Ubuntu 12.4

  - by Martin Oscarsson

  I can't get wireless to work on my computer. I have recently installed 12.04. Computer name: (Fujitsu siemens ESPRIMO Mobile u9200) Hardware button starts bluetooth - so can't start that way. Have searched the Internet for help but can't find any on my specific problem! State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath5k State: disconnected Default: no *-network beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. HERE IS ALL THE NETWORK INFO: ellika@ellikas:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13778 errors:0 dropped:0 overruns:0 frame:0 TX packets:9510 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14022669 (14.0 MB) TX bytes:1001621 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig [sudo] password for ellika: eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13801 errors:0 dropped:0 overruns:0 frame:0 TX packets:9528 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14024965 (14.0 MB) TX bytes:1002836 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ phy0 Wireless LAN phy0: command not found ellika@ellikas:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.4-1ubuntu2 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm ellika@ellikas:~$ sudo rf-kill unblock all sudo: rf-kill: kommandot hittades inte ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sedan sudo ifconfig wlan0 sedan: command not found ellika@ellikas:~$ sudo ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:22:5f:3f:63:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ellika@ellikas:~$ ^C ellika@ellikas:~$ ^C ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" ^[[C^[[C^[[C^[[C^[[C^[[B wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.4 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.451/10.517/10.631/0.062 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux ellika@ellikas:~$ ellika@ellikas:~$ clear ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.5 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.476/10.522/10.602/0.045 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux

  Read the article

• Ubuntu Server 11.10 boot, white terminal with garbled black text

  - by SpeedCrazy

  I just installed Ubuntu server 11.10 and the install went fine. This system is running on an Intel Pentium II board with onboard graphics. However when I try to boot into Ubuntu I get a white terminal with garbled black text. I have tried various grub 'fixes' as googling the issue seemed to suggest it was a res or grub related issue. I cannot ssh in so the issue does affect Linux as well. I have had no luck with anything thus far and am at my wits end. This was my first Ubuntu excursion as my friend told me it was better for servers than CentOS because it was easier... Not so much.... Does anyone have any ideas as to what the issue could be? When answering bear in mind I am an Ubuntu noob and Linux novice. As of 1/26/12 I have tried to add the console=ttyl line to the /etc/default/grub and run update-grub. This results in the line in the boot parameters that normally reads: linux /vmlunz-3.0.0-12-generic-pae root=/dev/mapper/dev-root rovt.handoff=7 now reads: linux /vmlunz-3.0.0-12-generic-pae root=/dev/mapper/dev-root ro console=ttyl vt.handoff=7 This does not work. Is there anyway to have console=ttyl inserted on a line by itself? I am at my wits ends, Thanks for all your help, Speed

  Read the article

• Grub problem - Command prompt

  - by RhZ

  Update: Thanks to all who helped. I gave up and am going to re-install. Not the end of the world, no files will be lost :-) This time will be backing up grub haha. Thanks again, I really appreciate the community's help on this. I was going along fine when the new pae kernel came down, and it had some bug where the sound was all messed up. So I used startup manager to choose the older pae kernel and rebooted. But startupmanager must have fuXXored my grub. When I re-booted, I get thrown directly into memtest and thats it. I tried to re-install grub using the live disc method that I found in many places. That changed something so I get a prompt and the message: "GNU grub version 1.99 ubuntu. Minimal BASH-like editing is supported. Type help for complete list." But then I tried the live CD fix again and now am back at the memtest... What can I do to get my system running again? UPDATE: Just to be clear,when I start up I get a blinking cursor in the top left, and the word 'ON' in the middle of the screen. Then, after a good minute or two, the memtest starts.

  Read the article

• "Unmet Dependencies" problem when trying apt-get install

  - by GChorn

  Anytime I try to install python packages using the command: sudo apt-get install python-package I get the following output: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-headers-generic : Depends: linux-headers-3.2.0-36-generic but it is not going to be installed linux-headers-generic-pae : Depends: linux-headers-3.2.0-36-generic-pae but it is not going to be installed linux-image-generic : Depends: linux-image-3.2.0-36-generic but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). This seems to have started when these same three packages showed up in Ubuntu's Update Manager and kicked an error when I tried to install them there. Based on the suggestion in the output above, I tried running: sudo apt-get -f install But this only gave me several instances of the following error: dpkg: error processing /var/cache/apt/archives/linux-image-3.2.0-36-generic_3.2.0-36.57_i386.deb (--unpack): unable to create `/lib/modules/3.2.0-36-generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko.dpkg-new' (while processing `./lib/modules/3.2.0-36-generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko'): No space left on device Now maybe I'm way off-base here, but I'm wondering if the error could be coming from the "No space left on device" part? The thing is, I'm running Ubuntu as a VirtualBox VM but I've got it set to dynamically increase its virtual hard drive space as needed, so why am I still getting this error? Here's my output when I use dh -f: Filesystem Size Used Avail Use% Mounted on /dev/sda1 6.9G 5.7G 869M 88% / udev 494M 4.0K 494M 1% /dev tmpfs 201M 784K 200M 1% /run none 5.0M 0 5.0M 0% /run/lock none 501M 76K 501M 1% /run/shm VB_Shared_Folder 466G 271G 195G 59% /media/sf_VB_Shared_Folder When I perform sudo apt-get -f install and the system says, After this operation, 192 MB of additional disk space will be used. Does that mean 192 MB of my virtual machine's current memory, or 192 MB on top of the rest of my free space? As I said, my machine normally dynamically allocates additional memory from the host machine, so I don't see why there would be memory restrictions at all...

  Read the article

• nvidia driver problem after update

  - by baltasar

  I know there are a lot of posts about nvdia driver, but I am not able to solve this. I updated my configuration yesterday, September 27th, and it seems that a new nvidia driver was involved. The updated completed with an error, and invited me to send a bug report automatically. I send it, but it finally said that there was no place to send the bug report to. Today I updated again, and a new kernel was there. Then I rebooted. I found a desktop in 640x480 with a horrible, unreadable font. I run jockey and tried to go back to another version of the nvidia driver, but it seems that none of the drivers listed there are suddenly valid. I have the x-swat repository enabled, because I remember that I had a similar issue in the past that was only to be solved with the newest driver. jockey log: 2012-09-28 11:22:24,747 DEBUG: Selecting previously unselected package nvidia-173. (Reading database ... 536311 files and directories currently installed.) Unpacking nvidia-173 (from .../nvidia-173_173.14.35-0ubuntu0.2_i386.deb) ... Processing triggers for man-db ... Setting up nvidia-173 (173.14.35-0ubuntu0.2) ... Loading new nvidia-173-173.14.35 DKMS files... Building only for 3.2.0-32-generic-pae Building for architecture i686 Building initial module for 3.2.0-32-generic-pae Error! Bad return status for module build on kernel: 3.2.0-32-generic-pae (i686) Consult /var/lib/dkms/nvidia-173/173.14.35/build/make.log for more information. Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... 2012-09-28 11:22:25,143 WARNING: modinfo for module nvidia_173 failed: ERROR: modinfo: could not find module nvidia_173 2012-09-28 11:22:25,143 ERROR: XorgDriverHandler.enable(): package or module not installed, aborting 2012-09-28 11:22:53,613 DEBUG: NVidia(nvidia_173).enabled(): target_alt /usr/lib/nvidia-173/ld.so.conf current_alt /usr/lib/nvidia-173/ld.so.conf other target alt /usr/lib/nvidia-173/alt_ld.so.conf other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:22:53,613 DEBUG: KMH enabled: False 2012-09-28 11:22:53,629 DEBUG: NVidia(nvidia_173).enabled(): target_alt /usr/lib/nvidia-173/ld.so.conf current_alt /usr/lib/nvidia-173/ld.so.conf other target alt /usr/lib/nvidia-173/alt_ld.so.conf other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:22:53,629 DEBUG: KMH enabled: False 2012-09-28 11:23:01,943 DEBUG: NVidia(nvidia_173).enabled(): target_alt /usr/lib/nvidia-173/ld.so.conf current_alt /usr/lib/nvidia-173/ld.so.conf other target alt /usr/lib/nvidia-173/alt_ld.so.conf other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:23:01,943 DEBUG: KMH enabled: False 2012-09-28 11:23:01,962 DEBUG: NVidia(nvidia_173).enabled(): target_alt /usr/lib/nvidia-173/ld.so.conf current_alt /usr/lib/nvidia-173/ld.so.conf other target alt /usr/lib/nvidia-173/alt_ld.so.conf other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:23:01,963 DEBUG: KMH enabled: False 2012-09-28 11:23:01,998 DEBUG: NVidia(nvidia_173_updates).enabled(): target_alt None current_alt /usr/lib/nvidia-173/ld.so.conf other target alt None other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:23:01,998 DEBUG: nvidia_173_updates is not the alternative in use 2012-09-28 11:23:02,044 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-173/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:23:02,044 DEBUG: nvidia_current is not the alternative in use 2012-09-28 11:23:02,066 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-173/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:23:02,066 DEBUG: nvidia_current is not the alternative in use 2012-09-28 11:23:02,106 DEBUG: NVidia(nvidia_current_updates).enabled(): target_alt None current_alt /usr/lib/nvidia-173/ld.so.conf other target alt None other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:23:02,106 DEBUG: nvidia_current_updates is not the alternative in use 2012-09-28 11:23:02,157 DEBUG: NVidia(nvidia_173).enabled(): target_alt /usr/lib/nvidia-173/ld.so.conf current_alt /usr/lib/nvidia-173/ld.so.conf other target alt /usr/lib/nvidia-173/alt_ld.so.conf other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:23:02,157 DEBUG: KMH enabled: False 2012-09-28 11:23:02,177 DEBUG: NVidia(nvidia_173).enabled(): target_alt /usr/lib/nvidia-173/ld.so.conf current_alt /usr/lib/nvidia-173/ld.so.conf other target alt /usr/lib/nvidia-173/alt_ld.so.conf other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:23:02,178 DEBUG: KMH enabled: False 2012-09-28 11:23:02,245 DEBUG: NVidia(nvidia_173).enabled(): target_alt /usr/lib/nvidia-173/ld.so.conf current_alt /usr/lib/nvidia-173/ld.so.conf other target alt /usr/lib/nvidia-173/alt_ld.so.conf other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:23:02,245 DEBUG: KMH enabled: False 2012-09-28 11:23:02,272 DEBUG: NVidia(nvidia_173).enabled(): target_alt /usr/lib/nvidia-173/ld.so.conf current_alt /usr/lib/nvidia-173/ld.so.conf other target alt /usr/lib/nvidia-173/alt_ld.so.conf other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:23:02,273 DEBUG: KMH enabled: False 2012-09-28 11:23:02,303 DEBUG: NVidia(nvidia_173_updates).enabled(): target_alt None current_alt /usr/lib/nvidia-173/ld.so.conf other target alt None other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:23:02,303 DEBUG: nvidia_173_updates is not the alternative in use 2012-09-28 11:23:02,330 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-173/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:23:02,410 DEBUG: nvidia_current is not the alternative in use 2012-09-28 11:23:02,427 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-173/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:23:02,428 DEBUG: nvidia_current is not the alternative in use 2012-09-28 11:23:02,457 DEBUG: NVidia(nvidia_current_updates).enabled(): target_alt None current_alt /usr/lib/nvidia-173/ld.so.conf other target alt None other current alt /usr/lib/nvidia-173/alt_ld.so.conf 2012-09-28 11:23:02,458 DEBUG: nvidia_current_updates is not the alternative in use

  Read the article

• Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169 with 2.6.39 kernel

  - by Dean Thomson

  I've been getting an issue since upgrading to 2.6.39 in Natty from the Kernel-PPA repository. When I do a sudo update-initramfs -u I get the following error message. update-initramfs: Generating /boot/initrd.img-2.6.39-0-generic-pae W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169 I did notice that firmware wasn't in the allocated directory. Does anyone know where to get the firmware files for this.

  Read the article

• ZTE USB Modem AC2736, connection not possible in Ubuntu 12.04.1 LTS

  - by Fredo

  It's a long post but nearly covers all my experiments and changes I did to my NM. Hope the information is complete and if there are still question, more information can be provided. I've a ZTE AC2736 USB Modem (CDMA modem) which worked fine in Ubuntu 10.04 /11.10. I recently switched to 12.04.1 (precise pangolin). after the switch the first issue I faced was to connect to internet using my USB modem (ISP: Reliance Brand: Netconnect). Tried to run the drivers provided by Reliance but they are old and won't support Kernel 2.6.30 above. since the code was not downloaded with ISO image (of 12.04) i couldn't compile the files provided in such driver. lsusb does detect it as Modem with output similar to 19d2:fff1 ZTE CDMA technologies inc. (or similar as i didn't note it down) If it is detected as USB storage it shows 19d2:fff5 (as per few online forums, i may be wrong here). I used the network Manager and configured the modem to dial #777 (default) and the ISP provided username:password combination. It tries to connect to internet (3-4 times automatically)but fails to get online. once I was able to connect in the monring hours and the message was flashed 'registered on CDMA home network'. I was able to run an update. the kernel was updated with 3.0.2 -pae OR something similar (can find out if required). I surfed the net for about 2 hours later before restarting. After the restart, again the Modem was not able to get me online. I kept trying for many times. I tried changing the setting in NM. One evening after dark I was able to connect to network with same message flash 'registered on CDMA home network' (the message was similar, i'm not precise here,sorry). I was able to surf the net for nearly 3 hours before I switched off my Laptop. I'm not able to get online after that day, It's been 3 days now. I'll try the observered theory of late/early hours sometime soon as mentioned below. Laptop configuration : Make: Lenovo Model: B480 Processor: Intel B950 RAM: 4G DDR3 HDD: 500 G Broadcom Wireless/Bluetooth/Ethernet LAN OS: FreeDOS / Ubuntu 12.04 LTS (dualboot) Kernel 3.0.2-pae Obeservation : I'm able to connect to internet in those hours when generally the speed is high (low usage by other network (wireless) users). like in early mornings or late nights. This is strange as connection should not be dependent on bandwidth usage. Any help would be appraciated to fix this issue. before I decide to cahnge the OS or ISP.

  Read the article

• Can not connect to wireless on 12.04 with Intel WiFi Link 5100

  - by WiData

  I am having problem in connecting to wifi. I have dual boot (Windows 7 and Ubuntu 12.04) on my Dell Studio 15. I upgraded to 12.04 quite some time ago (at least one month) from 11.10. Everything was working fine till yesterday. Since yesterday I can see the list of available Wifi connection but does not connect to any or if connects (after hours of trying) then disconnects after few minutes. My wifi interface is Intel WiFi Link 5100 AGN. However the problem is on both Windows and Ubuntu. Here are outputs of some commands which may be useful for those interested in helping: ~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:22:19:fa:65:bb UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:794 errors:0 dropped:0 overruns:0 frame:0 TX packets:794 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:56280 (56.2 KB) TX bytes:56280 (56.2 KB) wlan0 Link encap:Ethernet HWaddr 00:22:fb:d2:fc:ce UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:239 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:53603 (53.6 KB) Here is the output for the command sudo lshw -C network *-network description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:22:fb:d2:fc:ce width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-48-generic-pae firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:47 memory:f8000000-f8001fff My kernel version is kernel version 3.2.0-48-generic-pae I also checked this post which was helpful. But I am not sure if what is the exact problem. Any suggestions will be helpful. Should I be changing the firmware/driver? Currently my /lib/firmware has following iwlwifi files /lib/firmware/iwlwifi-1000-5.ucode /lib/firmware/iwlwifi-5000-5.ucode /lib/firmware/iwlwifi-100-5.ucode /lib/firmware/iwlwifi-5150-2.ucode /lib/firmware/iwlwifi-105-6.ucode /lib/firmware/iwlwifi-6000-4.ucode /lib/firmware/iwlwifi-135-6.ucode /lib/firmware/iwlwifi-6000g2a-5.ucode /lib/firmware/iwlwifi-2000-6.ucode /lib/firmware/iwlwifi-6000g2a-6.ucode /lib/firmware/iwlwifi-2030-6.ucode /lib/firmware/iwlwifi-6000g2b-6.ucode /lib/firmware/iwlwifi-3945-2.ucode /lib/firmware/iwlwifi-6050-5.ucode /lib/firmware/iwlwifi-4965-2.ucode Thanks a lot for the help.

  Read the article

• Cannot get Virtualbox to install properly on Ubuntu 12.04

  - by lopac1029

  I cannot get Virtualbox to install properly on my 12.04. I first went with a manual install for the .deb from the old builds section of the Virtualbox page. That .deb opened up the Software Center and installed. Then I got the error coming up of VT-x/AMD-V hardware acceleration is not available on your system. Your 64-bit guest will fail to detect a 64-bit CPU and will not be able to boot. which I can only assume was due to my Ubuntu version being 32-bit (System Details - Overview - OC type: 32-bit, right?) So I followed these instructions to remove the .deb manually, restarted my laptop, and then FOUND the actual Virtualbox install in the Software Center and installed from that (assuming it would give me the correct version I need for my system) So after all that (and then some), I'm still getting the same error when I connect to my new job's project in Virtualbox. Can anyone point me in the right direction of what to do here? This is the first time I've ever worked with Virtualbox, and no one at this company is using Ubuntu, so I'm on my own here. EDIT: Here is the direct info from running the 2 suggested commands Inspiron-1750-brick:~ $lscpu Architecture: i686 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 23 Stepping: 10 CPU MHz: 2100.000 BogoMIPS: 4189.45 L1d cache: 32K L1i cache: 32K L2 cache: 2048K Inspiron-1750-brick:~ $cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.80 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.45 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

  Read the article

• bluetooth fails to get enabled; Unknown symbol security_sk_clone (err 0) in dmesg

  - by Srivatsa Kanchi

  $ uname -a Linux ubuntu1110 3.0.0-14-generic-pae #23-Ubuntu SMP Mon Nov 21 22:07:10 UTC 2011 i686 i686 i386 GNU/Linux laptop model: Lenovo W520 upon trying to enable bluetooth, the led turns on but, bluetooth is fails to get enabled in the preferences also seen below error message in dmesg [78183.389048] usb 1-1.4: new full speed USB device number 19 using ehci_hcd [78183.504129] bluetooth: Unknown symbol security_sk_clone (err 0) [78183.505084] bluetooth: Unknown symbol security_sk_clone (err 0) [78183.505189] bluetooth: Unknown symbol security_sk_clone (err 0) [78183.505294] bluetooth: Unknown symbol security_sk_clone (err 0)

  Read the article

• kernel panic- not syncing: attempted to kill init!

  - by Jill

  I am not very technical. My system has frozen 3 times in March--- this is what was on screen... Ubuntu 10.04.4 LTS Admin.sybalsky.com tty1 admin.sybalsky.com login: [683454.747106] kernel panic- not syncing: attempted to kill init! I know the system is running: Linux admin.sybalsky.com 2.6.32-40-generic-pae #87-Ubuntu SMP Mon Mar 5 21:44:34 UTC 2012 i686 GNU/Linux Ubuntu 10.04.4 LTS Can you tell me what this all means and why it is happening and what can I do about it?

  Read the article

• Update Errors in Xubuntu 12.10

  - by wil

  I updated by computer from 12.04 to 12.10 and after I finished updating when I turned on my computer I am unable to update my computer. I tried install a new copy of 13.04 but my cpu doesn't support pae. I have a IBM Thinkpad T42 with a 1.7 gigahertx Cpu. When updating through terminal This is the output. sudo apt-get upgrade: [sudo] password for wil: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: linux-image-extra-3.5.0-34-generic : Depends: linux-image-3.5.0-34-generic but it is not installed linux-image-generic : Depends: linux-image-3.5.0-34-generic but it is not installed E: Unmet dependencies. Try using -f. sudo apt-get upgrade -f: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following NEW packages will be installed: linux-image-3.5.0-34-generic 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. 3 not fully installed or removed. Need to get 0 B/11.8 MB of archives. After this operation, 25.9 MB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 191530 files and directories currently installed.) Unpacking linux-image-3.5.0-34-generic (from .../linux-image-3.5.0-34-generic_3.5.0-34.55_i386.deb) ... This kernel does not support a non-PAE CPU. dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-34-generic_3.5.0-34.55_i386.deb (--unpack): subprocess new pre-installation script returned error exit status 1 No apport report written because MaxReports is reached already Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-34-generic /boot/vmlinuz-3.5.0-34-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-34-generic /boot/vmlinuz-3.5.0-34-generic Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.5.0-34-generic_3.5.0-34.55_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) wil@wil-ThinkPad-T42:~/Desktop$

  Read the article

• Installing WINE 1.4 Errors on Precise 12.04

  - by user71965

  This message is consistently received when installing WINE1.4, which fails to install properly update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Fatal: No images have been defined. run-parts: /etc/initramfs/post-update.d//runlilo exited with return code 1 dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools Any thoughts appreciated.

  Read the article

• 32-bit Ubuntu or 64-bit w/Intel Atom D510 w/4GB RAM?

  - by T.J. Crowder

  (I've seen this question and some related ones, and perhaps this is a duplicate although part of my question is specific to the Atom D510.) I'm going to be installing Ubuntu on a new silent desktop as my latest (and hopefully last) attempt to switch from Windows to Linux for at least most everyday tasks. The new machine is entirely passvely cooled, but as a consequence, not astonishingly powerful — an Atom D510 (dual-core, 1.6GHz, HT) on Intel's D510MO board. That's fine, I won't use it for gaming, (much) video editing, etc. It's a 64-bit processor and I'm maxing the board out at 4GB of RAM (hey, that 1.6 CPU needs all the help it can get), which naturally raises the question of whether to install Ubuntu 64-bit or 32-bit (and if the latter, either live with the missing RAM, or do the PAE kernel dance). Although I've used Linux on servers for years, I'm very nearly a Linux desktop newbie and am not currently in the mood to fight driver wars and such. So if I'm setting myself up for failure with 64-bit, I'll live with the missing ~0.8GB or fiddle with PAE. But if 64-bit is entirely "ready," great, I'm there. So: Do most mainstream apps (now) play nicely with 64-bit Linux? I can't help but notice the "AMD" in the ISO image filename ubuntu-10.04-desktop-amd64.iso and I know AMD lead the way on this stuff — does Ubuntu 64-bit play nicely with Intel processors? Just generally, would you recommend one or the other? (And if anyone has any experience with Ubuntu specifically on the D510 [32-bit or 64-bit] which might lead me one way or t'other, that would be useful.) Thanks in advance.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11  | Next Page >