Search Results

Search found 108 results on 5 pages for 'peripherals'.

Page 4/5 | < Previous Page | 1 2 3 4 5  | Next Page >

• How to write code that communicates with an accelerator in the real address space (real mode)?

  - by ysap

  This is a preliminary question for the issue, where I was asked to program a host-accelerator program on an embedded system we are building. The system is comprised of (among the standard peripherals) an ARM core and an accelerator processor. Both processors access the system bus via their bus interfaces, and share the same 32-bit global physical memory space. Both share access to the system's DRAM through the system bus. (The computer concept is similar to Beagleboard/raspberry Pie, but with a specialized accelerator added) The accelerator has its own internal memory (SRAM) which is exposed to the system and occupies a portion of the global address space (as opposed to how a graphics card would talk to teh CPU via a "small" aperture in the system memory space). On the ARM core (the host) we plan on running Ubuntu 12.04. The mode of operation of communicating between the processors should be that the host issues memory transactions on the system bus that are targeted at the accelerator internal memory. As far as my understanding goes, if I write a program for the host that simply writes to the physical address of the accelerator, most chances are that the program will crash due to a segmentation violation. So, I assume that I need some way of communicating with the device in real mode. What is the easiest way to achieve this mode of operation?

  Read the article

• External USB attached drive works in Windows XP but not in Windows 7. How to fix?

  - by irrational John

  Earlier this week I purchased this "N52300 EZQuest Pro" external hard drive enclosure from here. I can connect the enclosure using USB 2.0 and access the files in both NTFS partitions on the MBR partitioned drive when I use either Windows XP (SP3) or Mac OS X 10.6. So it works as expected in XP & Snow Leopard. However, the enclosure does not work in Windows 7 (Home Premium) either 64-bit or 32-bit or in Ubuntu 10.04 (kernel 2.6.32-23-generic). I'm thinking this must be a Windows 7 driver problem because the enclosure works in XP & Snow Leopard. I do know that no special drivers are required to use this enclosure. It is supported using the USB mass storage drivers included with XP and OS X. It should also work fine using the mass storage support in Windows 7, no? FWIW, I have also tried using 32-bit Windows 7 on both my desktop, a Gigabyte GA-965P-DS3 with a Pentium Dual-Core E6500 @ 2.93GHz, and on my early 2008 MacBook. I see the same failure in both cases that I see with 64-bit Windows 7. So it doesn't appear to be specific to one hardware platform. I'm hoping someone out there can help me either get the enclosure to work in Windows 7 or convince me that the enclosure hardware is bad and should be RMAed. At the moment though an RMA seems pointless since this appears to be a (Windows 7) device driver problem. I have tried to track down any updates to the mass storage drivers included with Windows 7 but have so far come up empty. Heck, I can't even figure out how to place a bug report with Microsoft since apparently the grace period for Windows 7 email support is only a few months. I came across a link to some USB troubleshooting steps in another question. I haven't had a chance to look over the suggestions on that site or try them yet. Maybe tomorrow if I have time ... ;-) I'll finish up with some more details about the problem. When I connect the enclosure using USB to Windows 7 at first it appears everything worked. Windows detects the drive and installs a driver for it. Looking in Device Manager there is an entry under the Hard Drives section with the title, Hitachi HDT721010SLA360 USB Device. When you open Windows Disk Management the first time after the enclosure has been attached the drive appears as "Not initialize" and I'm prompted to initialize it. This is bogus. After all, the drive worked fine in XP so I know it has already been initialized, partitioned, and formatted. So of course I never try to initialize it "again". (It's a 1 GB drive and I don't want to lose the data on it). Except for this first time, the drive never shows up in Disk Management again unless I uninstall the Hitachi HDT721010SLA360 USB Device entry under Hard Drives, unplug, and then replug the enclosure. If I do that then the process in the previous paragraph repeats. In Ubuntu the enclosure never shows up at all at the file system level. Below are an excerpt from kern.log and an excerpt from the result of lsusb -v after attaching the enclosure. It appears that Ubuntu at first recongnizes the enclosure and is attempting to attach it, but encounters errors which prevent it from doing so. Unfortunately, I don't know whether any of this info is useful or not. excerpt from kern.log [ 2684.240015] usb 1-2: new high speed USB device using ehci_hcd and address 22 [ 2684.393618] usb 1-2: configuration #1 chosen from 1 choice [ 2684.395399] scsi17 : SCSI emulation for USB Mass Storage devices [ 2684.395570] usb-storage: device found at 22 [ 2684.395572] usb-storage: waiting for device to settle before scanning [ 2689.390412] usb-storage: device scan complete [ 2689.390894] scsi 17:0:0:0: Direct-Access Hitachi HDT721010SLA360 ST6O PQ: 0 ANSI: 4 [ 2689.392237] sd 17:0:0:0: Attached scsi generic sg7 type 0 [ 2689.395269] sd 17:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2689.395632] sd 17:0:0:0: [sde] Write Protect is off [ 2689.395636] sd 17:0:0:0: [sde] Mode Sense: 11 00 00 00 [ 2689.395639] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412003] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412009] sde: sde1 sde2 [ 2689.455759] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.455765] sd 17:0:0:0: [sde] Attached SCSI disk [ 2692.620017] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2707.740014] usb 1-2: device descriptor read/64, error -110 [ 2722.970103] usb 1-2: device descriptor read/64, error -110 [ 2723.200027] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2738.320019] usb 1-2: device descriptor read/64, error -110 [ 2753.550024] usb 1-2: device descriptor read/64, error -110 [ 2753.780020] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2758.810147] usb 1-2: device descriptor read/8, error -110 [ 2763.940142] usb 1-2: device descriptor read/8, error -110 [ 2764.170014] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2769.200141] usb 1-2: device descriptor read/8, error -110 [ 2774.330137] usb 1-2: device descriptor read/8, error -110 [ 2774.440069] usb 1-2: USB disconnect, address 22 [ 2774.440503] sd 17:0:0:0: Device offlined - not ready after error recovery [ 2774.590023] usb 1-2: new high speed USB device using ehci_hcd and address 23 [ 2789.710020] usb 1-2: device descriptor read/64, error -110 [ 2804.940020] usb 1-2: device descriptor read/64, error -110 [ 2805.170026] usb 1-2: new high speed USB device using ehci_hcd and address 24 [ 2820.290019] usb 1-2: device descriptor read/64, error -110 [ 2835.520027] usb 1-2: device descriptor read/64, error -110 [ 2835.750018] usb 1-2: new high speed USB device using ehci_hcd and address 25 [ 2840.780085] usb 1-2: device descriptor read/8, error -110 [ 2845.910079] usb 1-2: device descriptor read/8, error -110 [ 2846.140023] usb 1-2: new high speed USB device using ehci_hcd and address 26 [ 2851.170112] usb 1-2: device descriptor read/8, error -110 [ 2856.300077] usb 1-2: device descriptor read/8, error -110 [ 2856.410027] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2856.730033] usb 3-2: new full speed USB device using uhci_hcd and address 11 [ 2871.850017] usb 3-2: device descriptor read/64, error -110 [ 2887.080014] usb 3-2: device descriptor read/64, error -110 [ 2887.310011] usb 3-2: new full speed USB device using uhci_hcd and address 12 [ 2902.430021] usb 3-2: device descriptor read/64, error -110 [ 2917.660013] usb 3-2: device descriptor read/64, error -110 [ 2917.890016] usb 3-2: new full speed USB device using uhci_hcd and address 13 [ 2922.911623] usb 3-2: device descriptor read/8, error -110 [ 2928.051753] usb 3-2: device descriptor read/8, error -110 [ 2928.280013] usb 3-2: new full speed USB device using uhci_hcd and address 14 [ 2933.301876] usb 3-2: device descriptor read/8, error -110 [ 2938.431993] usb 3-2: device descriptor read/8, error -110 [ 2938.540073] hub 3-0:1.0: unable to enumerate USB device on port 2 excerpt from lsusb -v Bus 001 Device 017: ID 0dc4:0000 Macpower Peripherals, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0dc4 Macpower Peripherals, Ltd idProduct 0x0000 bcdDevice 0.01 iManufacturer 1 EZ QUEST iProduct 2 USB Mass Storage iSerial 3 220417 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Config0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 Interface0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Update: Results using Firewire to connect. Today I recieved a 1394b 9 pin to 1394a 6 pin cable which allowed me to connect the "EZQuest Pro" via Firewire. Everything works. When I use Firewire I can connect whether I'm using Windows 7 or Ubuntu 10.04. I even tried booting my Gigabyte desktop as an OS X 10.6.3 Hackintosh and it worked there as well. (Though if I recall correctly, it also worked when using USB 2.0 and booting OS X on the desktop. Certainly it works with USB 2.0 and my MacBook.) I believe the firmware on the device is at the latest level available, v1.07. I base this on the excerpt below from the OS X System Profiler which shows Firmware Revision: 0x107. Bottom line: It's nice that the enclosure is actually usable when I connect with Firewire. But I am still searching for an answer as to why it does not work correctly when using USB 2.0 in Windows 7 (and Ubuntu ... but really Windows 7 is my biggest concern). OXFORD IDE Device 1: Manufacturer: EZ QUEST Model: 0x0 GUID: 0x1D202E0220417 Maximum Speed: Up to 800 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: OXFORD IDE Device 1 Unit: Unit Software Version: 0x10483 Unit Spec ID: 0x609E Firmware Revision: 0x107 Product Revision Level: ST6O Sub-units: OXFORD IDE Device 1 SBP-LUN: Capacity: 1 TB (1,000,204,886,016 bytes) Removable Media: Yes BSD Name: disk3 Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Not Supported

  Read the article

• Which Cortex-M3 interrupts can I use for general purpose work?

  - by Captain NedD

  I'd have some code that needs to be run as the result of a particular interrupt going off. I don't want to execute it in the context of the interrupt itself but I also don't want it to execute in thread mode. I would like to run it at a priority that's lower than the high level interrupt that precipitated its running but also a priority that higher than thread level (and some other interrupts as well). I think I need to use one of the other interrupt handlers. Which ones are the best to use and what the best way to invoke them? At the moment I'm planning on just using the interrupt handlers for some peripherals that I'm not using and invoking them by setting bits directly through the NVIC but I was hoping there's a better, more official way. Thanks,

  Read the article

• The Cleanest Reset for ARM Processor

  - by waffleman

  Lately, I've been cleaning up some some C code that runs on an ARM7 controller. In some situations (upgrade, fatal error, etc...) the program will perform a reset. Presently it just jumps to 0 and assumes that the start-up code will reinitialize everything correctly. It got me to thinking about what would be the best procedure a la "Leave No Trace" for an ARM reset. Here is my first crack at it: void Reset(void) { /* Disable interrupts */ __disable_interrupts(); /* Reset peripherals, externals and processor */ AT91C_BASE_RSTC->RSTC_RCR = AT91C_RSTC_KEY | AT91C_RSTC_PERRST | AT91C_RSTC_EXTRST| AT91C_RSTC_PROCRST; while(AT91C_BASE_RSTC->RSTC_RSR & AT91C_RSTC_SRCMP); /* Jump to the reset vector */ (*(void(*)())0)(); } Anything I haven't considered?

  Read the article

• Best advice for setting up Ubuntu on my mother's computer

  - by idealmachine

  Intended use My mother had an old Compaq desktop computer running Windows 98, which she used for occasional Web browsing and playing cards. The name of her card game is Hoyle Card Games 3. Although I had to repair it several times over the last 10 years, it worked fine until it finally died at the end of last year. Hardware specifications A relative brought up a newer computer soon afterward: Operating system: Windows XP Asus K8N motherboard (with broken on-board sound; getting a sound card) Athlon 64? processor (don't remember the clock speed) 512 MB RAM Hope the graphics card works... Replacement sound card will be one of: Ensoniq ES1370 AudioPCI Diamond Monster Sound MX300 (Aureal chipset) Sound Blaster Audigy 2 SE Peripherals HP Scanjet 3400c scanner (USB connected) HP LaserJet multi-function printer (parallel port connected, and printing works with a PCL driver) Same serial mouse as old computer Question I had set up an SSH/VNC connection to allow for remotely working out problems. Or so I thought. A month later, the computer would not boot, rendering the SSH connection useless and an OS reinstall necessary. Unfortunately, I have neither the original Windows disc nor the product key. Unless I were to pay $200 for a full Windows 7 Home Premium license for my computer, I would not be able to re-install Windows XP on hers. I consider myself an advanced Linux user, having used Debian for years. So here are my questions. I have only one day to decide whether to use Ubuntu or buy Windows: A quick search leads me to believe all the hardware listed above is supposed to work with Linux, but am I mistaken? Would Ubuntu/Xubuntu suffice (specify which one if it matters), or would I be better off paying the $200 necessary for Windows XP? Is the card game likely to run on Wine? I believe the minimum system requirement is Windows 95. Failing Wine compatibility, will VirtualBox run fast enough on such a computer (Windows 98 as the guest OS)? Are there any free card games just as good? She plays mainly Bridge, Poker, and Solitaire. Is there any "Large Fonts" option for those with poor vision? The lack of it would be a big disadvantage. BONUS: Although I would probably replace the old mouse upon a move to Ubuntu, is it even possible to get a serial mouse working?

  Read the article

• Oracle releases new Java Embedded products

  - by Henrik Stahl

  With less than one week to go to JavaOne 2012, we've spiced things up a little by releasing not one but two net new embedded Java products. This is an important step towards realizing the vision of Java as the standard platform for the Internet of Things that I outlined in a recent blog post. The two new products are: Java ME Embedded 3.2. Based on same code as the widely deployed Oracle Java Wireless Client for feature phones, this new product provides a Java ME implementation optimized for very small microcontroller-based devices and adds - among other things - a new Device Access API that enables interaction with peripherals common in edge devices such as various types of sensors. In addition to the new Java ME Embedded platform, we have also released an update of the Java ME SDK which adds support for the development of small embedded devices. Java Embedded Suite 7.0. This is an integrated middleware stack for embedded devices, incorporating Java SE Embedded and versions of JavaDB, GlassFish and a Web Services stack optimized for remote operation and small footprint. A typical Internet of Things (or M2M) infrastructure contains three types of compute nodes: The edge device which is typically a sensor or control point of some kind. These devices can be connected directly to a backend through a mobile network if they are installed in - for example - a remote vending machine; or, they can be part of a local short-range network and be connected to the backend through a more powerful gateway device. A gateway is the second type of compute node and acts as an aggregator and control point for a local network. A good example of this could be a generalized home Internet access point, or home gateway. Gateways are mostly using normal wall power and are used for multiple applications, deployed by multiple service providers. Finally, the last type of compute node is the normal enterprise or cloud backend. Java ME Embedded and Java Embedded Suite are perfect base software stacks for the edge devices and the gateway respectively, providing the Java promise of a platform independent runtime and a complete set of libraries as well as allowing a programmer to focus on the business logic rather than plumbing. We are very thrilled with these new releases that open up exciting opportunities for Java developers to extend services and enterprise applications in ways that will make organizations more efficient and touch our daily lives. To find out more, come to the JavaOne conference (for technical content) and to the Java Embedded @ JavaOne subconference (for business content). There will be plenty of cool demos showing complete end-to-end applications, provided by Oracle and our partners, as well as keynotes and numerous sessions where you can learn more about the technology and business opportunities.

  Read the article

• Setting up Ubuntu on my mother's computer

  - by idealmachine

  Intended use My mother had an old Compaq desktop computer running Windows 98, which she used for occasional Web browsing and playing cards. The name of her card game is Hoyle Card Games 3. Although I had to repair it several times over the last 10 years, it worked fine until it finally died at the end of last year. Hardware specifications A relative brought up a newer computer soon afterward: Operating system: Windows XP Asus K8N motherboard (with broken on-board sound; getting a sound card) Athlon 64? processor (don't remember the clock speed) 512 MB RAM Hope the graphics card works... Replacement sound card will be one of: Ensoniq ES1370 AudioPCI Diamond Monster Sound MX300 (Aureal chipset) Sound Blaster Audigy 2 SE Peripherals HP Scanjet 3400c scanner (USB connected) HP LaserJet multi-function printer (parallel port connected, and printing works with a PCL driver) Same serial mouse as old computer Question I had set up an SSH/VNC connection to allow for remotely working out problems. Or so I thought. A month later, the computer would not boot, rendering the SSH connection useless and an OS reinstall necessary. Unfortunately, I have neither the original Windows disc nor the product key. Unless I were to pay $200 for a full Windows 7 Home Premium license for my computer, I would not be able to re-install Windows XP on hers. I consider myself an advanced Linux user, having used Debian for years. So here are my questions. I have only one day to decide whether to use Ubuntu or buy Windows: A quick search leads me to believe all the hardware listed above is supposed to work with Linux, but am I mistaken? Would Ubuntu/Xubuntu suffice (specify which one if it matters), or would I be better off paying the $200 necessary for Windows XP? Is the card game likely to run on Wine? I believe the minimum system requirement is Windows 95. Failing Wine compatibility, will VirtualBox run fast enough on such a computer (Windows 98 as the guest OS)? Are there any free card games just as good? She plays mainly Bridge, Poker, and Solitaire. Is there any "Large Fonts" option for those with poor vision? The lack of it would be a big disadvantage. BONUS: Although I would probably replace the old mouse upon a move to Ubuntu, is it even possible to get a serial mouse working?

  Read the article

• RPi and Java Embedded GPIO: It all begins with hardware

  - by hinkmond

  So, you want to connect low-level peripherals (like blinky-blinky LEDs) to your Raspberry Pi and use Java Embedded technology to program it, do you? You sick foolish masochist. No, just kidding! That's awesome! You've come to the right place. I'll step you though it. And, as with many embedded projects, it all begins with hardware. So, the first thing to do is to get acquainted with the GPIO header on your RPi board. A "header" just means a thingy with a bunch of pins sticking up from it where you can connect wires. See the the red box outline in the photo. Now, there are many ways to connect to that header outlined by the red box in the photo (which the RPi folks call the P1 header). One way is to use a breakout kit like the one at Adafruit. But, we'll just use jumper wires in this example. So, to connect jumper wires to the header you need a map of where to connect which wire. That's why you need to study the pinout in the photo. That's your map for connecting wires. But, as with many things in life, it's not all that simple. RPi folks have made things a little tricky. There are two revisions of the P1 header pinout. One for older boards (RPi boards made before Sep 2012), which is called Revision 1. And, one for those fancy 512MB boards that were shipped after Sep 2012, which is called Revision 2. So, first make sure which board you have: either you have the Model A or B with 128MB or 256MB built before Sep 2012 and you need to look at the pinout for Rev. 1, or you have the Model B with 512MB and need to look at Rev. 2. That's all you need for now. More to come... Hinkmond

  Read the article

• Temporary boot problem after thunder storm - likely causes?

  - by alastairs

  The village where I live was sat under a thunder cloud for most of Friday, and we suffered a few power fluctuations (specifically, what seemed to be split-second outages). When I got back home from work, I found that my PCs had shut down during one of these outages. When I went to boot one of them back up, I couldn't get anything to display on screen, nor did the boot seem to complete correctly. I tried a number of things - unplugging different bits of hardware, swapping graphics adaptors, etc. - to no avail. I thought I was looking at a fried motherboard or CPU. Power seemed to be distributed correctly to the peripherals (the drives all appeared to be working) so I figured it couldn't be the PSU. Eventually I unplugged it from the mains and left it overnight (approx 12hrs unplugged). I tried it again this morning, and it booted up correctly. Woo-hoo! I have all my equipment protected by surge-protected power strips, so I don't think a spike caused these problems. Obviously it has something to do with the power fluctuations, and maybe the PSU in the problem machine got itself confused somehow. The questions are, for future reference and to help people with similar problems: What are the likely causes of the boot failure I experienced? Is a UPS a simple and cost-effective solution, or might other things help prevent this happening in future? What UPS can you recommend (my budget is limited)?

  Read the article

• Huge host CPU usage in idle vmware guest. Ubuntu 10.04 host, Vista SP2 guest

  - by themesandmodules

  I'm experiencing huge host CPU usage with an idle vmware guest. Host: Ubuntu 10.04 32-bit 2.6.32-24-generic-pae. (Very new install, i.e 24 hours ago) Hardware is Dell XPS M1530 laptop, 4GB ram. Intel Core II Duo T9300 2.50Ghz The virtualization setting "VT" or something is enabled in my bios. Guest: Completely fresh install of Windows Vista, upgraded to latest SP2 and all windows updates installed. 1024 - 1512MB ram allocated. Absolutely no other software installed on it, apart from VMWare tools. Situation When the guest is doing absolutely nothing, I watch with sysinternals process watch on the guest. This shows that system idle process is between 70 and 99%, usually around 95%. No actual process doing anything. On the host, I watch with top, I get cpu usage of 20% - 80%, usually around 30%. What I have tried Single and Dual processor available to guest - no change. Turn off all peripherals to guest - no network, drives, usb etc - no change. Turn off 3d acceleration for guest - perhaps a small improvement, or no change. Upping allocated ram to guest from 1024MB to 1512MB - no change. Yelling at vmware - no change. I have experienced a similar issue in the past, which was solved by setting the guest to have 1 CPU. This time that hasn't worked.

  Read the article

• What is the minimal steps to setup a client-server network using Windows Server 2008 R2 standard?

  - by Motivated Student

  Background I have One computer server with Win Server 2008 R2 standard installed but it has not been configured. This server has 2 LAN adapters. One adapter is connected to ISP and the other one connected to HUB/Switch. Other computers working as clients are connected to the same HUB/Switch to which the server is connected. IP Printers, IP scanners, IP camera are also connected to the same HUB/Switch. Note: I am a newbie. I only know how to plug RJ-45 sockets and assembly computer peripherals. I have no prior experience in Windows Server at all. Please teach me from the newbie's point of view. Objective I want to establish the following: Each client can access the internet, printers, scanners after it has been successfully authenticated by the server. Unauthenticated clients cannot access the internet, printers, etc. The server hosts a local site. Clients can browse internally using a private domain www.company.com. If the same domain name has been used by other on the internet, my private domain must override the public domain.

  Read the article

• Is there the equivalent of cloud computing for modems?

  - by morpheous

  I asked this question on SF, and someone recommended that I ask it here - (I don't think I have enough points to move a question from SF to SO - and in any case, I don't know how to do it - so here is the question again): I am interested in the concept of PAAS (platform as a service). However, all talk about SAAS/PAAS seems to focus on only the computer itself - not its peripherals. Is it possible to 'outsource' modems as a resource - so that an app running remotely can pump data to a modem in the cloud? As a bit of background to the question, a group of us are thinking of starting a company that offers similar services to companies like twilio etc - but I want to 'outsource' both the computing hardware (thats PAAS - the easy bit) and the modems (thats what I cant seem to find any info on). Does anyone know if modems can be bundled as part of a PAAS service? - alternatively, is there a way that an application running on one computer can communicate (i.e. pump data) to a remote modem residing on another machine?. I assume I can come up with some protocol over UDP or TCP - but there is no point reinventing the wheel - if such a protocol like that already exists (or if it some open source software allows one to do this). Any suggestions on how to solve this problem?

  Read the article

• Stop the constant random reboots of my GIGABYTE GA-B75M-D3V

  - by Frederic

  I've got some issues with a new system. It's rebooting constantly. The system consists of a: brand new: Gigabyte GA-B75M-D3V with F9 BIOS (latest) Intel Core i5-3470 Ivy Bridge 2x 8GB G.SKILL Ripjaws 1600MHz memory (mem-tested x-86) coming from a stable system: Creative Soundcard X-FI Titanium Asus Radeon HD4850 OCZ Vertex 3 120G SSD Sata 3 Hard disk 1TB Sata 2 ASUS Blu-ray Drive PSU 400w Connected peripherals : Toshiba tv (displayport on dvi of MB or HD4850) Wired mouse, wireless keyboard (logitech) Bluetooth usb key Azio main problem : it's not possible to read the errors from the MB. nothing on the manual neither on internet. At the beginning, I received a MB with graphic problems and the problem of rebooting. I RMA'd it. The new one doesn't have any graphic problems. but it's still constantly rebooting. I removed everything except the HD, the sound-card, the blu-ray drive and the wireless keyboard. It's still unexpectdly rebooting. I'm running a test with just the motherboard and the HD. I will update this text after the test. I've got some questions : Somebody have an idea of a test? The PSU could cause that problem? I used it a lot of years with the stable system. Update 1: BTW, if anyone has the same problem, the manual won't say it but you'll need to reset the bios between two tests (the screwdriver on the two pins) if you suspect a problem of compatibility .

  Read the article

• PC power supply & normal range for voltages reported in BIOS hardware monitor?

  - by Chris W. Rea

  I'm trying to diagnose whether my computer has an ample power supply. Sometimes when I play a video-intensive game, both monitors lose the video signal, even though the computer remains on and sound playing. A theory I have is: the video card isn't getting sufficient power. I can't imagine it's overheating because the machine is well-ventilated and the video card isn't hot to touch when this happens. Anyway, in my PC's BIOS there's a Hardware Monitor page, and among other voltages reported (such as CPU, DRAM, South Bridge, etc.) I can see the following values: 3.3V 3.152V 5V 4.944V 12V 11.872V Are those the voltages used by peripherals? What voltage should I be referencing if I want to know what my video card (PCI Express) is consuming? What is the normal range of values reported for those? My values above appear to be under by approximately 4.5%, 1.1%, and 1.1% respectively. Is that cause for concern? How else should I be determining if my power supply is "right-sized" for my PC and video card, or am I perhaps barking up the wrong tree?

  Read the article

• Virtualizing an Inline network appliance with VirtualBox (or VMWare)

  - by Tzury Bar Yochay

  My device, which is a Linux based IP in-liner is transparent to the network peripherals, that is, no IP address assigned to any of its interfaces. For the sake of the conversation, let's use ADSL connection as an example, while the device is inspecting the bi-directional traffic, the network is behaving same as if device was not there, attached to the wire (see Physical setup at the attached diagram). I wonder if I can enclosed that "device" within a Windows machine and have it operated virtually so it still seats inline between the ADSL router and the Windows netwroking interface by using virtual NICs, (or whatever their name is in windows), and inspecting the traffic, same as if it was on a separate physical device, the drawing under "Virtual Setup" in the attached diagram show what I am trying to achieve. Reading a bit on the VirtualBox docs, seems like binding the right side is relatively simple, perhaps I should have one network adapter set as Bridge Networking and VirtualBox will connect it to the physical NIC on the host machine, and network packets are exchanged directly, circumventing the host operating system's network stack (WinXP in my case). However, I have no idea how to achieve the left side of my diagram, which requires adding virtual NICs to windows and configure them correctly in a way to make that pipeline possible. I would appreciate any help. by the way, if that is not possible with VirtualBox but with other virtualization solution (e.g. VMWare), I would accept the other as well.

  Read the article

• How to verify power provided to processors is clean

  - by GregC

  Once in a blue moon, I am seeing a blue screen of death on a shiny new Dell R7610 with a single 1100 Watt Dell-provided power supply on a beefy UPS. BCode is 101 (A clock interrupt was not received...), which some say is caused by under-volting a CPU. Naturally, I would have to contact Dell support, and their natural reaction would be to replace a motherboard, a power supply, or CPU, or a mixture of the above components. In synthetic benchmarks, system memory and CPU, as well as graphics memory and CPU perform admirably, staying up for hours and days. My questions are: Is power supply good enough for the application? Does it provide clean enough power to VRMs on the motherboard? Are VRMs good enough for dual Xeon E5-2665? Does C-states logic work correctly? Is there sufficient current provided to PCIe peripherals, such as disk controllers? P.S. Recently, I've gone through the ordeal with HP. They were nice and professional about it, but root cause was not established, and the HP machine still is less than 100%, giving me a blue screen of death once in a couple of months. Here's what quick web-searching turns up: http://www.sevenforums.com/bsod-help-support/35427-win-7-clock-interrupt-bsod-101-error.html#post356791 It appears Dell has addressed the above issue by clocking PCIe bus down to 5GT/sec in A03 BIOS. My disk controllers support PCIe 3.0, meaning that I would have to re-validate stability. Early testing shows improvements. Further testing shows significant decrease in performance on each of the x16 slots with Dell R7610 with A03 BIOS. But now it's running stable. HP machine has received a microcode update in September 2013 SUM (July BIOS) that makes it stable.

  Read the article

• How can I get Pinch to Zoom back in Desktop mode?

  - by Ben Brocka

  Windows 7 had an old implimentation of Pinch to Zoom where bringing your fingers apart/together would act similar to ctrl + +/-, the standard zoom. It's not as nice as granular zoom (like iOS/Android use) but it worked. Most notably it doesn't work in Chrome (did before) but I haven't noticed it working in any other apps. In windows 8 desktop mode, pinch to zoom doesn't seem to work at all. It doesn't even work in One Note 2010, which, if I recall correctly, had granular zoom in Windows 7. I have an (older) 2 touch point multi-touch monitor, and I can see the visual feedback that the two touch points and coming closer/farther apart, but it doesn't zoom. Note I'm using the touchscreen, not a touchpad or the Arch mouse or other peripherals. Can I enable this somehow or is it gone from Desktop mode? It works fine in Metro apps. Additionally I get weird visual feedback when placing my second finger on the screen; a shrinking transparent square appears somewhere between the two fingers, visually similar to the Right Click visual queue when long-pressing. It's not a right click though, I can't tell what, if anything, it's doing.

  Read the article

• What's Keeping My Computer Awake?

  - by phantomdata

  First the question; How do I figure out what is preventing my Windows 7 computer from going into sleep mode? Second; some background... I've been struggling with this for a few days and am utterly perplexed. I setup sleep mode on my Windows 7 PC a few weeks ago, and all was well. The PC would sleep as expected and I was snuggly in knowing that my computer was saving power and some wear and tear on the components (we'll leave the 'is it better to sleep' debate for another thread/day, please don't start it). Well, I noticed the other night that my system stopped ever going to sleep. I set the sleep time down to 1 minute and wandered fully away from the PC (ensuring that no errant mouse or keyboard movements would occur) and the PC never went to sleep. I've also observed this over longer intervals as well, such as overnight. I have sleep mode enabled, of course "multimedia settings - When Sharing Media" is set to allow the computer to sleep. "powercfg -lastwake" show nothing of interest, since it never goes to sleep and can't wake up. "powercfg /requests" shows 3 entries - all "[DRIVER] ?". I assume that 2 of these are my mouse and keyboard - as I've recently used them to run the powercfg command. I'm at a loss for the third though. I've unhooked all USB peripherals save for my keyboard and mouse. Wake on LAN is disabled in my BIOS. I know that you can disable all apps from waking/preventing sleep - but I want the ability to remain for those apps that do legitimately need to keep the system awake. So; does anyone know of a way to figure out what the 3rd phantom "[DRIVER] ?" is in powercfg /requests?

  Read the article

• What's Keeping My Computer Awake?

  - by phantomdata

  Hey guys, First the question; How do I figure out what is preventing my Windows 7 computer from going into sleep mode? Second; some background... I've been struggling with this for a few days and am utterly perplexed. I setup sleep mode on my Windows 7 PC a few weeks ago, and all was well. The PC would sleep as expected and I was snuggly in knowing that my computer was saving power and some wear and tear on the components (we'll leave the 'is it better to sleep' debate for another thread/day, please don't start it). Well, I noticed the other night that my system stopped ever going to sleep. I set the sleep time down to 1 minute and wandered fully away from the PC (ensuring that no errant mouse or keyboard movements would occur) and the PC never went to sleep. I've also observed this over longer intervals as well, such as overnight. I have sleep mode enabled, of course "multimedia settings - When Sharing Media" is set to allow the computer to sleep. "powercfg -lastwake" show nothing of interest, since it never goes to sleep and can't wake up. "powercfg /requests" shows 3 entries - all "[DRIVER] ?". I assume that 2 of these are my mouse and keyboard - as I've recently used them to run the powercfg command. I'm at a loss for the third though. I've unhooked all USB peripherals save for my keyboard and mouse. Wake on LAN is disabled in my BIOS. I know that you can disable all apps from waking/preventing sleep - but I want the ability to remain for those apps that do legitimately need to keep the system awake. So; does anyone know of a way to figure out what the 3rd phantom "[DRIVER] ?" is in powercfg /requests?

  Read the article

• vmware server 64 bit on ubuntu 9.10 64 bit with P2V windows 2003 SBS poor network speed

  - by RobertHC

  configuration is ubuntu 2.6.31-21 64 bit vmware 2.0.2 64 bit last release hardware is core 2 quad with 8GB ram guest is win 2003 server SBS 32 bit Dear friends, we have a converted physical to virtual windows sbs 2003, converted with last converter available nowadays http://www.vmware.com/products/converter/ vCenter converter. Running the P2V 2K3 SBS on vmware server, it does boot fine, but we do note an abnormal CPU activity and a poor lan speed. As attempts we did what follow. We removed all unneeded peripherals, we removed one NIC (phisycal server was 2 nics), we changed the vmx to ged the nic recognized as intel instead than amd, we removed 1 cpu (physical was 2 cpu), we removed anything was reported as failed driver from system events monitor. Nothing to do, no way and funny results. Let's read some tests results. All are made with the same file copied in different source folders. Copying from client side (both directions copy, to/from server) results are i.e. 10 seconds, copying the same files from server side (again from and to server) results are different... from client to server, speed is round about (bit more) 10 seconds, but from server to client direction is slower: double the time. Beeing very fast and launching a simultaneous copy "from server to client"+"from client to server", this made from the server side, results in a stuck traffic... 45 seconds to do the copy. vmware tools are installed and e1000 driver has been updated. With one processor CPU activity is still going up and down but much less than with two. Because of test, we installed win 2k8 STD 64 bit. We repeated all the above tests with exactly the same file result is just one: always 5 seconds (this matches the lan speed) Any idea about this issue is welcome and thank you if any. Kind regards R.

  Read the article

• Is there the equivalent of cloud computing for modems?

  - by morpheous

  I asked this question on SF, and someone recommended that I ask it here - (I don't think I have enough points to move a question from SF to SO - and in any case, I don't know how to do it - so here is the question again): I am interested in the concept of PAAS (platform as a service). However, all talk about SAAS/PAAS seems to focus on only the computer itself - not its peripherals. Is it possible to 'outsource' modems as a resource - so that an app running remotely can pump data to a modem in the cloud? As a bit of background to the question, a group of us are thinking of starting a company that offers similar services to companies like twilio etc - but I want to 'outsource' both the computing hardware (thats PAAS - the easy bit) and the modems (thats what I cant seem to find any info on). Does anyone know if modems can be bundled as part of a PAAS service? - alternatively, is there a way that an application running on one computer can communicate (i.e. pump data) to a remote modem residing on another machine?. I assume I can come up with some protocol over UDP or TCP - but there is no point reinventing the wheel - if such a protocol like that already exists (or if it some open source software allows one to do this). Any suggestions on how to solve this problem?

  Read the article

• Unnecessary Redundancy with Tables.

  - by Stacey

  My items are listed as follows; This is just a summary of course. But I'm using a method shown for the "Detail" table to represent a type of 'inheritence', so to speak - since "Item" and "Downloadable" are going to be identical except that each will have a few additional fields relevant only to them. My question is in this design pattern. This sort of thing appears many, many times in our projects - is there a more intelligent way to handle it? I basically need to normalize the tables as much as possible. I'm extremely new to databases and so this is all very confusing to me. There are 5 items. Awards, Items, Purchases, Tokens, and Downloads. They are all very, very similar, except each has a few pieces of data relevant only to itself. I've tried to use a declaration field (like an enumerator 'Type' field) in conjunction with nullable columns, but I was told that is a bad approach. What I have done is take everything similar and place it in a single table, and then each type has its own table that references a column in the 'base' table. The problem occurs with relationships, or junctions. Linking all of these back to a customer. Each type takes around 2 additional tables to properly junction all of the data together- and as such, my database is growing very, very large. Is there a smarter practice for this kind of behavior? Item ID | GUID Name | varchar(64) Product ID | GUID Name | varchar(64) Store | GUID [ FK ] Details | GUID [FK] Downloadable ID | GUID Name | varchar(64) Url | nvarchar(2048) Details | GUID [FK] Details ID | GUID Price | decimal Description | text Peripherals [ JUNCTION ] ID | GUID Detail | GUID [FK] Store ID | GUID Addresses | GUID Addresses ID | GUID Name | nvarchar(64) State | int [FK] ZipCode | int Address | nvarchar(64) State ID | int Name | varchar(32)

  Read the article

• Windows 7 extremely slow login, exchange performance, printer enumeration, etc...

  - by Jeff

  Background: I have a fresh copy of Windows 7 Professional x64 on a Dell Latitude E6500. The laptop has 8GB RAM, 250GB drive, and all Intel peripherals (net/wifi/graphics). All available Windows updates, as well as hardware drivers are installed. The IT folks where I work joined the computer to our Windows 2003-based Active Directory domain. There are no errors in any logs that we've looked at, and Group Policy templates appear to have applied properly. Problem: Every time I turn on or reboot the computer, it takes between 2 to 10 (all times are actual) minutes after successfully typing my username/password to get to my desktop. My login script does not always run. Sometimes I get a black screen, and a couple of minutes later the login script will pop up and take up to 10 minutes to complete. I can get around this by hitting cntrl-shift-esc and running explorer.exe from the Task Manager. The login script continues to hang, but I can minimize it and go on about my business. Either way, it generally throws errors prior to completing. I often get slow or failed connectivity to Exchange via Outlook. When I bring up printer dialogs, they take several minutes to populate, and block the calling app while doing so. Copies to SMB shares are very slow. On my home network, everything works fine. On both the work network and home network, I can use remote internet resources just fine. Web pages pull up, remote VPN's are fine, I can max out bandwidth on SpeakEasy Speed Test. I can get almost max bandwidth transferring FTP/HTTP over a LAN. Another symptom of the problem is that when I first log in, the work network shows as "Identifying" for a long time in the Network and Sharing Center, and will often then change to the name of the work domain, but say "Unauthenticated Network". Note that this computer previously ran Windows Vista with none of these problems. Attempts to Fix: Installed the Win7 admin pack Uninstalled/reinstalled all hardware drivers Verified Active Directory DNS settings (Vista works relatively well on the same network) Reset all TCP/IP settings on all adapters using the netsh commands to do so Disabled ipv6 on all adapters Disable wifi adapter while on work network Locked the network card to 100/Full, 1000/Full; also tried Auto Added various important addresses to hosts file (exchange, dns, ad) -- removed when didn't help My background is a jpeg (sounds unrelated but there is apparently a win7 login bug related to solid color background) More I have forgotten The IT staff at my company indicated they believe this is due to having Windows 2003 AD servers and not having any Windows 2008 R2 AD servers. Other than that, they have no advice or assistance to offer other than a rebuild (already tried that once with similar symptoms), or downgrade to Vista. Any thoughts out there?

  Read the article

• Gigabyte GA-970A-UD3 mobo won't boot from USB flash drive

  - by user38586

  I am trying to boot BAMT a Debian flavor via USB on a brand new Gigabyte GA-970A-UD3 motherboard. I tried various flash drive and various OS. I never had this problem with ASUS and MSI. The problem is from Gigabyte hardware. I found that my BIOS is very strict about MBR compatibility. Now I can boot in DOS mode. The flash drive need to be formated as a Win98 Startup disk using HP USB disk storage format tool. Unetbootin menu is booting from USB but won't install BAMT. If I use Windows or Linux diskimager the working MBR is deleted. I tried converting BAMT .img to .iso and it is not booting with Unetbootin. Is it possible to boot BAMT(Debian Linux) from a Win98 DOS command prompt? Maybe there is a way to burn the image and keep the working MBR? If the working MBR is deleted, the flash drive is not recognized at all by the BIOS. This is the info I found that got me booting for the first time in DOS: GB's BIOS will only boot USBs formatted to FAT-32, conforming to normal MBR bootloader. I've seen this before, and surmised that the 'stick-maker' was formatting in ReiserFile, or one of the EXT 'flavors', but no one ever followed up to confirm or deny... Also, if it's putting the bootloader into its own partition - won't work! In the BIOS, on the "Integrated Peripherals" page, the "USB Storage Function" item must be enabled (which should be the default) to allow USB booting... I've put a little work into a 'GB USB booting tutorial', and frankly, I'd just go ahead and finish it up for you, but I really don't want to reboot the several times it will take me to 'firm up' procedural details, and take the BIOS/boot pictures for the post - just noticed VAIL finally went 'public beta', so will be downloading for likely twenty-six hours or so There's likely enough there to test a 'raw DOS boot', just to see if your hardware (especially the USB stick itself) will do it... Some post later: Fixed. Here is a brief summary. Since my ubuntu live usb sticks (2gb kingston and 8gb sandisk sd/usb reader - fat32, created in ubuntu 10.04) would not boot this board even though they would boot my ga-ep45-ud3p, I decided to try bilbat's suggestion with the HP usb boot program. I created the win98 boot disk on the kingston 2gb stick without reformatting. It booted right up. Next, I used windows version of unetbootin to write the ubuntu live cd to the kingston disk. This fired right up and completed the install. Everything seems to be in good order now. Unfortunately I can boot in DOS mode but can't boot BAMT.

  Read the article

• Gigabyte GA-Z77X-D3H MB problems

  - by Hans

  I installed a new system last week. I've some issues with it. The system consists of a: Gigabyte GA-Z77X-D3H with F9 BIOS (latest) Intel Core i5 3570K proccesor Sapphire Radeon HD7850 2x 8GB Corsair 1600MHz memory OCZ Vertex 2 120G SSD Connected peripherals : 2 Samsung 940BF (1 via DVI on GFX card, 1 via an Displayport to DVI adapter) 1 Dell U2312HM monitor (displayport) Dell USB Hub (monitor) Wired mouse, wireless keyboard (logitech) Logitch G25 wheel Canon MP800 printer Okay, my issues are the following: if I plug in 1 or more monitor at DisplayPort during boot, most of the time it won't boot properly. I get an empty message screen of UEFI: only the header GIGABYTE DUEL BIOS appears. The system reboots itself, turns on for a few seconds (no video) and then reboots again. Now it starts all over again. This repeats until I remove all displayport monitors. Windows boots, and I can use them when I replug them. The graphics card has been running fine for a few weeks on an older system (intel Q6600). Another issue is; if I plug in my G25 steering wheel, the UEFI BIOS is inaccessible. It either gives the same empty UEFI screen, or the BIOS screen is rendering but crashes half way (so pieces of text and graphics are missing, and it has crashed). If I remove the G25, all is fine. To verify the graphics card is OK and the motherboard is causing these issues, I tried an NVIDIA 8800GT graphics card. This hasn't got Displayport, but it also cannot boot the BIOS with the G25 wheel plugged in. The PC also refuses to go into or out of standby. It just hangs when going into standby, and in other occasions (when it does succesfully do so) get out of standby. Power supply is OCZ StealthXStream 600W. Proccesor is 25 - 30C idle, ~55C stressed (Scythe Mugen 2). I am really puzzled what can be done to resolve this. I am not really waiting for an RMA request (otherwise I will return the MB for another type), because it will likely mean I have to wait very long before I get a replacement. Anyone else with a similar experience on this board/chipset or can help me troubleshoot this?

  Read the article

< Previous Page | 1 2 3 4 5  | Next Page >