Search Results

Search found 25098 results on 1004 pages for 'usb network adapter'.

Page 4/1004 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• wifi usb dongle detected but no wlan interface

  - by piotrek

  I'm using ubuntu 12.04. When I insert my philips PTA01 usb wifi dongle, in dmesg i can see: [ 1181.535290] usb 2-3: new high-speed USB device number 4 using ehci_hcd [ 1181.684074] usb 2-3: New USB device found, idVendor=0471, idProduct=209e [ 1181.684086] usb 2-3: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 1181.684093] usb 2-3: Product: PTA-01 [ 1181.684100] usb 2-3: Manufacturer: PHILIPS TV [ 1181.684105] usb 2-3: SerialNumber: 10 dmesg | grep ath: [ 367.861626] usbcore: registered new interface driver ath9k_htc but still there is no wlan interface when I do ifconfig. Just eth0 and lo. How can I turn wifi on? in case it's relevant. uname -a: Linux myhost 3.5.0-28-generic #48~precise1-Ubuntu SMP Wed Apr 24 21:42:24 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• USB to LPT adapter?

  - by Dave

  I'm bummed out, pretty much all of our computers here lack parallel ports. I have an EETools ChipMax programming tool that has one of the old-school Centronics connectors on the back. I figured that someone must make a USB to LPT adapter. Sure enough, I found one from iogear, the GUC1284B that is a USB to Parallel Printer cable. Note the boldface on the Printer. It must connect to a printer -- it isn't some generic USB to parallel interface, unfortunately. Does anyone here know of an adapter that works for parallel devices that aren't printers? I'd hate to have to buy a USB version of the ChipMax when I don't need to use it very much.

  Read the article

• external drive and CentOS - Reset high speed USB device number

  - by Phil

  I have 2 external drives (3TB) and both will not work with my centOS Box. Tested them in windows ( different machine ) No problems ( 2.6.32-279.9.1.el6.i686 ) dmesg reports: usb 2-2: new high speed USB device number 3 using ehci_hcd usb 2-2: New USB device found, idVendor=2109, idProduct=0700 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: USB 3.0 SATA Bridge usb 2-2: Manufacturer: VIA Labs, Inc. usb 2-2: SerialNumber: 0000000000006121 usb 2-2: configuration #1 chosen from 1 choice scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access ST3000DM 001-9YN166 CC4B PQ: 0 ANSI: 2 sd 6:0:0:0: Attached scsi generic sg3 type 0 sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sdd] 5860533165 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 6:0:0:0: [sdd] Write Protect is off sd 6:0:0:0: [sdd] Mode Sense: 00 06 00 00 sd 6:0:0:0: [sdd] Assuming drive cache: write through sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sdd] Assuming drive cache: write through sdd: sdd1 sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sdd] Assuming drive cache: write through sd 6:0:0:0: [sdd] Attached SCSI disk Tyring to use cfdisk / fdisk / gdisk or even fdisk -l results in the program hanging and dmesg reports: usb 2-2: reset high speed USB device number 3 using ehci_hcd usb 2-2: reset high speed USB device number 3 using ehci_hcd usb 2-2: reset high speed USB device number 3 using ehci_hcd I have the same 2 drives physically installed in the computer via SATA Any Ideas?

  Read the article

• Mechanical mouse using USB-to-PS/2 Adapter freezes occasionally

  - by izn

  I am using an AOpen PS/2 mechanical mouse in Ubuntu 11.10 with a Staples USB-to-PS/2 Adapter with my Intel DP67DE motherboard. The mouse is more comfortable for my hand as it has a lower height than optical mouses. Occasionally the mouse cursor freezes and often I have to unplug it from the USB port and plug it back in to unfreeze it. This happens with all the USB ports. I've been using the adapter for a few weeks now and this seems to be happening more often recently. What might be happening and is there anything that can be done to fix this?

  Read the article

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

  - by Gaurav_Java

  I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

  Read the article

• Emulate a USB port as a USB flash drive?

  - by Wilco

  Does anyone know of any software that can emulate a USB flash drive through an available USB port in OS X? Perhaps some way to map a directory to a USB port that could then be connected to another device that supports reading USB storage devices? I'd love to connect my laptop to my car's USB port and access files as if it were a USB drive. I know about the target disk mode with firewire (not sure if this is also supported over USB), but I was hoping for something that doesn't require booting outside of the OS (I want to retain use of the machine). Any ideas?

  Read the article

• linux: mount old ATA disk to USB adapter

  - by 130490868091234

  I am trying to recover data from an old Linux that was installed in a computer on an ATA hard drive. I found a ScanLogic Corp. SL11R-IDE IDE Bridge (04ce:0002), an ATA adapter to USB 1.0 like the one in the picture: and after switching it on, I plugged it into a laptop with Ubuntu 12.04. I am used to the drives being automatically mounted, but this one doesn't show up in /media. After doing a dmesg, all I got is this: [215298.671924] usb 2-1.1: new full-speed USB device number 5 using ehci_hcd [215298.767330] scsi19 : usb-storage 2-1.1:1.0 [215299.841701] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.017258] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.197050] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.372730] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd I tried plugging in the adapter to the three different USB ports in my laptop (one of them USB 3.0), but got no luck with any of them. I get different devices under, for example: /dev/bus/usb/003/002 or /dev/bus/usb/002/004, but I don't get any /dev/sdbN links. The output blkid -o list -c /dev/null is just the laptop's partitions. I have tried taking out the jumper, putting it as master and as CS Enabled, but didn't change the result. Any ideas?

  Read the article

• Problem installing Cardbus/PCMCIA drivers (USB 2.0 2-port)

  - by Carl

  I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

  Read the article

• Device Manager - does USB listing look right?

  - by Carl

  I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

  Read the article

• Problem with USB drivers (Windows-XP)

  - by Carl

  I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

  Read the article

• Wired and Wireless USB Network Adapter

  - by Evan M.

  Does anyone know if there are any USB network adapters out there that have both wired and wireless networking capability? Far-fetched, I know, but thought I'd ask. Background: Some of our users have locked down laptops that we also include unlocked virtual machines running on VMware Player. Sometimes the users have a need for network connectivity with their VMs where NAT and bridged networking from the host won't work. To supplement this, we want to supply them with adapters that they can use VMware USB pass through capabilities to provide appropriate connectivity. They will need both wired and wireless capability. Rather than carrying around 2 adapters, was hoping we could get a combination unit so that we can reduce it to 1. Thanks

  Read the article

• Lenovo ThinkPad L520 slows down when AC power adapter is plugged in

  - by Aamir

  I have a new laptop Lenovo ThinkPad L520 (7859-5BG) Core i5-2520M(2.5GHz) with 4GB RAM. Having installed Ubuntu 11.10 32-bit, while browsing with Chrome on GNOME classic (no effects), I noticed 173% CPU usage by chrome browser process, and the system slowly got very very slow, Now, at this stage as I removed the power adapter, the system suddenly got faster (and stopped the lagging behavior) and CPU usage drops down to 48% !! Observation 1: I was browsing through chrome when my system seemed to be seriously lagging, so I killed chrome to see if it gets any faster. But there remained no difference. Notice that CPU usage was a bit strange here. It showed no high activity, but as soon as I would click on applications in gnome panel, it would shoot CPU usage to 70, or 80 or 90 or 143% etc. depending on how quickly i clicked back and forth. At this instance I removed by AC adapter of my laptop, and suddenly system got fine. So i again clicked on gnome panel, and noticed that it now took only 7% or 12% or 13% at max, with same kind of clicks in application menu. Observation 2: At the other times, with AC adapter plugged in, top indicates four instances of chromium taking 90%, 60%, 47% and 2% (for example), and then once I take out the AC adapter same processes take lesser CPU all of a sudden Intermediate conclusions: What does this indicate ? I cannot figure out any "other" process in "top" that is suddenly being triggered, its the same process that hogs up my CPU once AC power is plugged in ! NOTE: the problem is now CONFIRMED, as i can repeat that when I have power adapter plugged in ! Can anyone tell me what exactly does this indicate ? What is wrong, is it some bug with power management or what ?

  Read the article

• Power adapter is not seen in Ubuntu 11.10

  - by Jammanuser

  I have an Alienware M17xR3 laptop running Ubuntu 11.10, and there is an issue with my power adapter when it is plugged in after OS has already loaded (i.e. when I unplug it when at Ubuntu's desktop, and then replug it in again). The problem is Ubuntu thinks its still running on battery power, and that the battery is discharging, and does not recognize my power adapter plugged in. Note that when the power adapter is plugged in when Ubuntu loads up, there is no issue though. It sees the power adapter just fine. So what can be done to solve this problem? Thanks in advance for any help.

  Read the article

• WiFi USB adapter showing the Network ..... but no connection in effect

  - by Idrees

  I have Pentium 4 system 3 GHz, 1 GB RAM ..... (no built-in WiFi) I installed Ubuntu 12.10 on my PC, works fine. It picked all the drivers for audio, video itself. I plugged TP-Link 54Mbps High Gain Wireless USB Adapter (TL-WN422G) ..... (link for the device: http://www.tp-link.com/en/products/details/?model=TL-WN422G) Now what happens is that the WiFi network is detected and shown in the "Network Connections", and it is also connected to it but when I open Firefox it is as if there no internet connection at all.

  Read the article

• Configure USB GSM Modem

  - by adisembiring

  I want to configure EVDO Usb Modem in Ubuntu 10.10 I insert my usb modem to laptop and check the usb is detected or not using $sudo lsusb and the result is: Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 201e:2009 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 14cd:6600 Super Top USB 2.0 IDE DEVICE Bus 002 Device 002: ID 201e:2009 is my us device. and than I execute command $dmesg | grep -e tty [ 0.000000] console [tty0] enabled [ 818.054660] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 818.055125] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 818.055647] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB2 [ 818.330641] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 818.330743] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 818.330840] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 1054.917473] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB0 [ 1054.917995] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB1 [ 1054.918481] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB2 [ 1055.214087] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 1055.214221] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1055.214356] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 Why converter disconnected from ttyUSB2 ? and than I try to execute command $sudo wvdialconf sorry, no modem was detected! Is it in use by another program ? did you configure it properly with setserials ? I change the same type usb modem from my friend, but I still get error above.

  Read the article

• Configure EVDO USB Modem in Ubuntu 10.10

  - by adisembiring

  I want to configure EVDO Usb Modem in Ubuntu 10.10 I insert my usb modem to laptop and check the usb is detected or not using $sudo lsusb and the result is: Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 201e:2009 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 14cd:6600 Super Top USB 2.0 IDE DEVICE Bus 002 Device 002: ID 201e:2009 is my us device. and than I execute command $dmesg | grep -e tty [ 0.000000] console [tty0] enabled [ 818.054660] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 818.055125] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 818.055647] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB2 [ 818.330641] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 818.330743] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 818.330840] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 1054.917473] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB0 [ 1054.917995] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB1 [ 1054.918481] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB2 [ 1055.214087] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 1055.214221] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1055.214356] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 Why converter disconnected from ttyUSB2 ? and than I try to execute command $sudo wvdialconf sorry, no modem was detected! Is it in use by another program ? did you configure it properly with setserials ? I change the same type usb modem from my friend, but I still get error above.

  Read the article

• Alfa AWUS036H USB wireless adapter not recognized

  - by GFiasco

  The Alfa AWUS036H USB wireless adapter will not be recognized by my netbook (Ubuntu 14.04, Asus X201E). As I understand it, the drivers should already be built in to this version of Linux, but I tried a make/make install of the latest Realtek drivers (as mentioned on How do I install drivers for the Alfa AWUS036H USB wireless adapter?) and it didn't work. I then followed the advice of this thread (ALFA AWUS036NH driver) and did a make/make install of the most up-to-date backport of the drivers, but that didn't work. At this point I tried a series of commands from this thread (http://ubuntuforums.org/showthread.php?t=2187780) in an attempt to identify the problem, but at no point could I get the laptop to ever recognize the USB adapter. I have also troubleshot the USB cable itself, tried both the USB 2.0 and 3.0 ports on the laptop, have never received an error message regarding a need to update the firmware, and have seemingly successfully installed all manner of variation of Realtek drivers which were supposed to make the adapter work. (I also tried to delete/clean up after each install, in the hope I wasn't making things worse.) Not sure what I should do next. Please let me know if I need to post any more information. Thanks very much for your help. EDIT: Before inserting Alpha USB adapter: :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub After inserting Alpha USB adapter (USB 3.0 port, no change): :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Ran tail -f /var/log/syslog, inserted device, no recognition (last entry is dated 16:17:01, so an hour ago). Going to check on an Ubuntu 14.04 laptop and Windows XP desktop. I'll update after. Thanks for your help to this point.

  Read the article

• Serve up PC hard drive as USB mass storage

  - by sheepsimulator

  Is there a software package available that can serve up a hard-drive internal to a PC and make it available over USB to other USB Master nodes as mass storage? Ex: take your C: or /dev/hda drive on a PC (let's call the computer PC-A), and run a driver program which makes your C: or /dev/hda drive available to external devices as USB mass storage. When you'd hook up another PC (PC-B) to PC-A via USB, it would detect a USB mass storage device, which is C: or /dev/hda on PC-A. Is this even possible? EDIT: I know that there are other ways of making data on a drive available between two different computers (eg. putting PC-A's hdd in a USB-drive-enclosure, or having PC-A make the hdd available via a network share). But I'd like to know if the method that I describe above is even technically possible.

  Read the article

• Windows 7 USB power lose after a few seconds / minutes

  - by Stefan Dunn

  My friend's computer has a problem where the USB ports causes problems with the power of some devices connected to the computer. The USB mouse has no problems, however the Wireless Adapter looses power after around 20 seconds of use and USB Flash Drives cause the computer to either freeze, lose power (and become unresponsive) or become disconnected (still shown in Device Manager, but not in My Computer) when trying to transfer any type of file to / from the computer. I have a suspicion it's the Motherboard but could it also be a Software problem? Tried a new case, RAM, CPU and GFX Card which had no effect. The problem occurs on both the Front USB and Back (Motherboard) USB Ports. UPDATE: Tried the USB devices with an Ubuntu Live CD and they work fine, could this mean it's a problem with Windows (x64)?

  Read the article

• PS/2 vs USB keyboards: performance and energy consumption

  - by Mister Smith

  As far as I know, PS/2 keyboards are interrupt driven, while USB are polled. Typically a PS/2 keyboard was assigned IRQ_1 on Windows. I'm no hardware expert, but at a first glance seems like the PS/2 keyboards are more efficient. So here are my questions: On modern day computers, are PS/2 keyboard better (or faster), and if so, would it be noticeable at all? (e.g.: in gaming) Since they don't need polling, do PS/2 keyboards save energy compared to USB? (notice I'm not talking only about the peripheral here, but about the overall computer energy consumption). In case PS/2 had any advantage over USB, would adding a PS/2 adapter to my USB keyboard make the device as good as an actual PS/2 keyboard? Conversely, would adding a USB adapter to a PS/2 make it as bad as a USB KB? Thanks in advance.

  Read the article

• How to "restart/repair" an USB port?

  - by Click Ok

  My laptop have 2 usb ports, but one is broken, so I use an USB hub in the another good USB port. In that USB hub, I use a mouse and keyboard. Suddenly, that USB port doesn't detects the mouse and keyboard (even with the light of the hub is on), and the only solution that I found is restarting the laptop. But just some minutes and the keyboard and mouse goes undetected again... So, I wonder if there is some method/software/etc to "restart/repair" the USB port without restart the PC. Thanks for all!

  Read the article

• Strange behavior of USB HID device

  - by spyder

  I have a device with ARM that work as USB HID. It working well on Windows XP x32 sp 2 and sp 3 (USB 2.0, many PCs), on Windows 7 x32 Ultimate (USB 2.0, Lenovo and HP laptops) but do not work on Windows 7 x64 Home Premium sp1 — plugged and unplugged frequently in USB 2.0 with baloon with "unknown device" in system tray and works not well in USB 3.0 port (MSI all-in-one PC), not all programs can detect it. What can cause this problem? Update. I connected my device via USB hub and everything works fine with it.

  Read the article

• Can Windows tell me what is using my USB drive?

  - by PP

  Being the good citizen I am, I left-click on the "Safely Remove Hardware" icon in my taskbar, and select my USB drive to dismount. Then I get the message: Windows can't stop your 'Generic volume device because it is in use. Close any programs or windows that might be using the device, and then try again later. Of course, being the Operating System, it knows exactly what applications are using my device. So why won't it tell me? As usual, I always end my Vista questions with this plea: anyone know a Microsoft Engineer I can kick?

  Read the article

• DVI to USB adapter - Worth it?

  - by Brian

  Hello, I have a DVI TV, and was wondering if anyone has tried out the DVI to USB adapter and could let me knwo what kind of quality it has... was it worth it? Was thinking of using it for online TV (don't have a wireless device)... Thanks.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >