Search Results

Search found 353 results on 15 pages for 'wayne robinson'.

Page 4/15 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • configuring vsftpd anonymous upload. Creates files but freezes at 0 bytes

    - by Wayne
    vsftpd on ubuntu after sudo apt-get install vsftpd Then did configuration as in the attached /etc/vsftpd.conf file. Anonymous ftp allows cd to the upload directly and allows put myfile.txt which gets created on the server but then the client hangs and never proceeds. The file on the server remains at 0 bytes. Here's the folders and permissions: root@support:/home/ftp# ls -ld . drwxr-xr-x 3 root root 4096 Jun 22 00:00 . root@support:/home/ftp# ls -ld pub drwxr-xr-x 3 root root 4096 Jun 21 23:59 pub root@support:/home/ftp# ls -ld pub/upload drwxr-xr-x 2 ftp ftp 4096 Jun 22 00:06 pub/upload root@support:/home/ftp# Here's the vsftpd.conf file: root@support:/home/ftp# grep -v '#' /etc/vsftpd.conf listen=YES anonymous_enable=YES write_enable=YES anon_upload_enable=YES dirmessage_enable=YES xferlog_enable=YES anon_root=/home/ftp/pub/ connect_from_port_20=YES chown_uploads=YES chown_username=ftp nopriv_user=ftp secure_chroot_dir=/var/run/vsftpd pam_service_name=vsftpd rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key Here's a file example that attempted to upload: root@support:/home/ftp/pub/upload# ls -l total 0 -rw------- 1 ftp nogroup 0 Jun 22 00:06 build.out This is the client attempting to upload...it is frozen at this point: $ ftp 173.203.89.78 Connected to 173.203.89.78. 220 (vsFTPd 2.0.6) User (173.203.89.78:(none)): ftp 331 Please specify the password. Password: 230 Login successful. ftp> put build.out 200 PORT command successful. Consider using PASV. 553 Could not create file. ftp> cd upload 250 Directory successfully changed. ftp> put build.out 200 PORT command successful. Consider using PASV. 150 Ok to send data.

    Read the article

  • Certificate Template Missing from "Certificate Template to Issue"

    - by Adam Robinson
    I'm having a problem similar to that posted in this question: Missing Certificate template From certificate to issue The short version is that I've created a duplicate certificate template and I'm trying to add it to my domain CA so that I can issue certificates with it. However, when I go into the Certification Authority MMC and go to "Certificate Templates - New - Certificate Template To Issue", my template is missing (along with quite a number of other templates that are present in the domain). Unlike the previous question, however, my CA is running on Server 2008 R2 Enterprise. Our organization has a single DC and a single CA, so I'm not seeing where there could be propagation delay. Any ideas how to get my template to show so that I can issue certificates?

    Read the article

  • Fedora, ssh and sudo

    - by Ricky Robinson
    I have to run a script remotely on several Fedora machines through ssh. Since the script requires root priviliges, I do: $ ssh me@remost_host "sudo touch test_sudo" #just a simple example sudo: no tty present and no askpass program specified The remote machines are configured in such a way that the password for sudo is never asked for. For the above error, the most common fix is to allocate a pseudo-terminal with the -t option in ssh: $ ssh -t me@remost_host "sudo touch test_sudo" sudo: no tty present and no askpass program specified Let's try to force this allocation with -t -t: $ ssh -t -t me@remost_host "sudo touch test_sudo" sudo: no tty present and no askpass program specified Nope, it doesn't work. In /etc/sudoers of course I have this line: #Defaults requiretty ... but I can't manually change it on tens of remote machines. Am I missing something here? Is there an easy fix? EDIT: Here is the sudoers file of a host where ssh me@host "sudo stat ." works. Here is the sudoers file of a host where it doesn't work. EDIT 2: Running tty on a host where it works: $ ssh me@host_ok tty not a tty $ ssh -t me@host_ok tty /dev/pts/12 Connection to host_ok closed. $ ssh -t -t me@host_ok tty /dev/pts/12 Connection to host_ok closed. Now on a host where it doesn't work: $ ssh me@host_ko tty not a tty $ ssh -t me@host_ko tty not a tty Connection to host_ko closed. $ ssh -t -t me@host_ko tty not a tty Connection to host_ko closed.

    Read the article

  • Setting up fail2ban to ban failed phpMyAdmin login attempts

    - by Michael Robinson
    We've been using fail2ban to block failed ssh attempts. I would like to setup the same thing for phpMyAdmin as well. As phpMyAdmin doesn't log authentication attempts to a file (that I know of), I'm unsure of how best to go about this. Does a plugin / config exist that makes phpMyAdmin log authentication attempts to a file? Or is there some other place I should look for such an activity log? Ideally I will be able to find a solution that involved modifying fail2ban config only, as I have to configure fail2ban with the same options on multiple servers, and would prefer not to also modify the various phpMyAdmin installations on said servers.

    Read the article

  • How do you fix a MySQL “Incorrect key file” error when you can’t repair the table?

    - by Wayne M
    I'm trying to run a rather large query that is supposed to run nightly to populate a table. I'm getting an error saying Incorrect key file for table '/var/tmp/#sql_201e_0.MYI'; try to repair it but the storage engine I'm using (whatever the default is, I guess?) doesn't support repairing tables. how do I fix this so I can run the query? We are under pressure to get this table loaded for a client.

    Read the article

  • Can I get 4 screens running on an ATI Radeon HD 5700 series video card?

    - by Wayne
    I have successfully run 3 displays using the 5700, but i want to run a 4th screen off the HDMI Port. Mainly I would like it to Mirror the primary monitor onto the TV connected to the HDMI Port. Any help at all would be greatly appreciated. I can get a signal to it, i just have to disable one of my original 3 monitors. Im not willing to do that. So other than disabling one of my monitors, does anyone have any suggestions?

    Read the article

  • Optimum configuration of McAfee for Servers

    - by Wayne Arthurton
    Our corporate standard is McAfee Enterprise, unfortunately this is non-negotiable. On two types of servers I'm responsible for, SQL & Web, we have noticed major performance issues with the corporate standard setup. Max scan time 45sec One policy for all processes Scan ALL files on write, read and open for backup Heuristics: Find unknown programs, trojans and macros Detect unwanted programs Exclude: EVT, LDF, LOG, MDF, VMD, , windows file protection) This of course still causes major slowdowns. IIS .NET recompiles are slow especially with SharePoint, SQL backups and restores, SQL Analysis Services, Integration Services and temp data from them as well. I have looked from time to time, for some best practices on setting up McAfee of SQL & SQL Analysis Service, SQL Integration Service, Visual Studio, Sharepoint, and .NET web servers in general. How do people setup McAfee enterprise on their corporate serves keeping security intact, but affecting performance as minimally as possible? Has anyone run across white papers on these setups? Obviously some are case by case, but there must be some best practices out there somewhere.

    Read the article

  • Should one have a separate user account for work use? [closed]

    - by Tyler Wayne
    This question examines the practice of using a separate OS-level user account to divide work use from personal use (specifically, in a creative profession and on a personal computer). I recently left my in-the-flesh job to go to school, but I'm carrying on with the work remotely. I do all of my work on my laptop, and I currently have a separate user account called "Work" where I do exactly that. However, I'm now starting to question that practice. Because my hobby is the same as my job, I want to save notes of the things I learn while working. Because ideas come at any moment, I often want to throw something into my personal task manager's inbox and look at it again later. That task manager is well-suited to handle both the work and personal aspects of my life. Only my personal account has admin rights, but work sometimes requires me to install programs. My employer has no preference regarding my choice, so that is a non-issue. My work is essentially freelance web development, so advice given with that in mind will be much appreciated. Back up all opinion with some personal experience, please. Ideally, give a list of pros and cons and then name reasons for your position.

    Read the article

  • Set Photo For Domain Users

    - by Wayne Hartman
    One of the more interesting features of Windows Vista/7 is being able to set a photo to represent your user. This is nice on a standalone installation, but is there a way to set the photo in Active Directory so that the photo is consistent no matter where the user logs in across the domain?

    Read the article

  • NFS or GFS for LVS 10 Server Setup

    - by Michael Robinson
    Currently we have a 10 servers LVS hosting setup. The people we hired to set it up did not anything about GFS which was our preferred Central Storage File System Solution. As we have tight time constraint, we just told them to use whatever they were familiar with which is NFS. I have since done some research and it seems that NFS is not ideal for the type of high traffic site we are hoping to build. I couldn't find much info online about the signaficance differences between the 2. As we to setup all servers again right now, should we stick with NFS or find someone who knows how to setup GFS amd go with that. We need a setup that is highly reliable and scalable as we intend. As after initial setup is done, we expect high increases in traffic and load.

    Read the article

  • How to find the real IP to which IPVS is routing a virtual IP

    - by Wayne Conrad
    I'm trying to find a problem server hiding behind a virtual IP (using LVS/ipvs). I've got a test program that sends requests to the virtual IP until it gets the bad response, but how can I tell to which real IP a request to the virtual IP got routed? On the box doing the virtual IP magic, here's the virtual IP configuration (for the service I care about): IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn ... TCP 10.1.0.254:5025 nq -> 10.1.0.5:5025 Route 1 0 1 -> 10.1.0.6:5025 Route 1 0 5 -> 10.1.0.7:5025 Route 1 0 2 -> 10.1.0.9:5025 Local 1 0 3 -> 10.1.0.11:5025 Route 1 0 3 ... My client program is sending TCP requests to 10.1.0.254:5025, usually getting a good response but sometimes a bad response. With this few servers, I could send my request to each server in turn until I discover the culprit, but I wonder if that technique will scale as we add servers. What means exist for me to find out where requests got routed? Kernel: Linux 2.6.32 OS: Debian testing (whatever that's called these days). ipvsadm is version 1.25, compiled with ipvs v1.2.1

    Read the article

  • Installing WinPcap on Windows 8

    - by Dave Robinson
    I know there has been lots of discussion already on installing WinPcap on Windows 8. I'm running the RTM version. I was able to install WinPcap without a hitch by using the Windows 7 compatibility mode. Since then, I've noticed that WinPcap has stopped running and is actually no longer even installed. I tried installing it again, but now it continues to tell me that WinPcap does not work with my version of Windows. Compatibility modes and admin privileges make no difference. The only thing I remember doing to my system was installed 900MBs of Windows Updates. Does anyone have any ideas about what I might do to get WinPcap installed? I've already ensured that the compatibility mode settings I changed were in effect for all users. I've already ensured that "run this program as an administrator" is checked on the compatibility tab for all users. I've also tried installing WinPcap 4.1.2 and 4.1.1. No success with either.

    Read the article

  • Windows Software RAID 5 Drive Failure Notification

    - by Wayne Hartman
    I plan on creating a Windows software RAID 5 array but need to know when a drive goes bum. I don't plan on wanting to check the server every so often, so how can I have an email sent when a drive goes kapüt or otherwise has problems? Keying off the event log would be OK, but how does one set up notifications on it when the exact event ID(s) may not be known?

    Read the article

  • Does TAM == TAPI3 Voice Compliance?

    - by Wayne Hartman
    I am looking to purchase some cheap USB modems that claim to be able to use TAM (Telephone answering machine). I am an unable to see any explicit commands that these devices support. Would it be safe to assume that these devices support the AT instructions for playing/recording audio from the modem?

    Read the article

  • Add 802.11n to existing 802.11g environment

    - by Andrew Robinson
    I have a small home network that is currently running 802.11g. Two computers that are capable of 802.11n and two devices (a BlackBerry and a Skype phone) that are limited to 802.11g. I have a few neighbors running 802.11g but their signals are very weak. How big an impact will the two G devices have on N speeds? Will they pull the whole network back down to G? These two devices are hardly ever used where as the other N devices are heavily used. If I add an N router to the network (instead of replacing the G) and set my existing G router to use channel 1 with 20MHz bandwidth and then set the N router to use 6 & 11 for 40MHz will I eliminate the overlap and allow for full speed on both networks?

    Read the article

  • What are the default groups assigned to the first user in Ubuntu Server?

    - by Wayne Koorts
    I just made a silly mistake on my Ubuntu Server box: I added myself to a group using usermod -G, after which I discovered the -a option... The result is that I am now out of the admin group, and lost my sudo rights. I can sort that out, but I want to know what other groups I may been removed from? My user was the first one so what I'm looking for is a list of groups that the first user gets added to at installation time.

    Read the article

  • SQL Server 2005 SP3 Express Backups Incredibly Slow

    - by Adam Robinson
    I'm attempting to troubleshoot an issue with one of our customers who's using SQL Server 2005 SP3 Express to house their application data. The automatic backups that we perform when upgrading our application are timing out after 30 minutes, and I've been sitting and watching the backup take place in SSMS for about 20 minutes now and it's only gotten to 30%. The database is only slightly over 1GB, so I'm baffled as to what could be causing this sort of horrible performance. The machine is a 1.87GHz Xeon with 3GB of RAM running Windows Server 2003 R2. While that's hardly a powerful box, this seems ridiculous. Does anyone have any idea why these backups could be taking so long and, more importantly, how I can do something about it?

    Read the article

  • QuickTime X incorrect aspect ratio for H.264 video

    - by Adam Robinson
    I'm running Snow Leopard and have a serious issue with QuickTime X. I have a Samsung HMX-H100N/XAA camcorder that records H.264 video in either 720p or 1080i. In either of these resolutions, QuickTime X (and, by extension, all QuickTime-associated applications like FCP, iMovie, etc.) displays an incorrect aspect ratio for all video produced by this camcorder. For example, 720p video is reported as being 1280x720 in the movie inspector (which is normal), but the displayed size is always at an aspect ratio of something like 63:20 (never heard of such a ratio) with sizes like 1700x539. If I open the video in QuickTime 7 player on the same computer, it is displayed correctly. If I process the video through something like MPEG Streamclip to transcode it, it displays correctly. As it stands right now I have to transcode all of my video in order to use it in any iLive (or other QT-based application) unless I want it to look ridiculous. I've tried installing Perian, but that seemed to have no effect.

    Read the article

  • iPhoto & iPhone Album order is different

    - by Ben Robinson
    I can't seem to find any answers to this, I have around 100 albums in iPhoto on my Mac, they are all synced to my iPhone, but on the phone they are just being displayed in a seeming random order. I have removed all the photos from the phone and started again, but they go back in the same order. In iPhoto the albums are actually in alphabetical order, have I've clicked the sort albums option, but this did nothing? Any ideas?

    Read the article

  • trying to figure out how to bridge two virtual networks together and in turn bridge that to the internet for a virtual inline IDS/IPS system

    - by Tony robinson
    I'm trying to figure out how to bridge two vmware (server or workstation, workstation) or virtualbox networks together with a linux IDS/IPS system transparently inline between both the virtual networks. How do I accomplish this? I understand how to bridge to virtual networks together, but how to I make the linux virtual machine sit between them and force traffic to go across the transparent bridge? I would like to have something along the lines of: vmnet a various vms host-only network ---- inline linux box vmnet a boxes forced to go through here to get to the internet --- vmnet b network with internet access configured as either NAT or bridged -- internet I know that basically the linux box needs two virtual nics, one on vmnet a and vmnet b, but other than that, I don't know how to force all the traffic to go across the "transparent" bridging linux box on its way to the internet. Do vmnet a and b have to be the same ip network with the same default route? does vmnet a not have a default route and vmnet b have a default route? I've read in vmware forums that on the linux host you need to change permissions on the vmnet files for promiscuous mode? is this true? how do you configure this scenario on a windows box?

    Read the article

  • Screen flicker -> Severe System Slowdown?

    - by Adam Robinson
    I'm using a Dell D830 laptop, and over the last few weeks it's been developing a very irritating screen flicker problem that leads to the system slowing down almost to the point of unusability. At seemingly random times (no commonality between how long the system has been running, what I was doing, what applications were open, etc.) my screen (I use two external LCD's with the laptop closed in a dock) flickers for a moment, then the system becomes incredibly slow. The screen redraws painfully slowly--almost like what you might expect to see with generic graphics drivers installed--and the entire system is maddeningly unresponsive. The only thing that seems to be able to correct the issue is a restart. I've checked the event logs and nothing out of the ordinary is there, and definitely nothing that's common to all of the events. I'm running XP Pro SP2. Any ideas?

    Read the article

  • Which home automation technology to choose? x10 zwave e.t.c. in UK [closed]

    - by Stewart Robinson
    I work away most of the week and have to leave my house empty. I would like to have home automation monitor and control my house. Naturally I want to be a bit of a geek and do some of it myself so I've researched stuff like x10, zwave, cbus e.t.c. but I want opinions on which I should use in my house. I have a Linux box that could be used to actually do controlling if needed. So which technology and why?

    Read the article

  • Reccomendation for tuning 100's of Sql Databases

    - by wayne
    Hi, I'm running several sql servers, each running a few hundred multi gig databases for customers. They are all setup homogeneously as far as the schemas are concerned, however customer usages of the data differ quite alot from database to database. What would be the best way to auto-index / profile / tune this large amount of databases? As there are atleast 600 or more catalogs i cant have someone manually profile, and index as required by each databases usage patterns. I'm currently running SQL 2005 but will be moving to 2008, so solutions that work with either are fine!

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >