Search Results

Search found 116 results on 5 pages for 'windbg'.

Page 4/5 | < Previous Page | 1 2 3 4 5  | Next Page >

  • Appverifier and Visual Studio for leak detection

    - by Patito
    Hi, I'm running Appverifier in an application. When it detects a memory leaks the logs saids "Address of the leaked allocation. Run !heap -p -a to get additional information about the allocation." I guess that's when you are running in Windbg, is there any way to access the allocation stack trace from inside Visual Studio ?

    Read the article

  • Access Voilation in std::pair

    - by sameer karjatkar
    I have an application which is trying to populate a pair . Out of no where the application crashes . The Windbg analysis on the crash dump suggest PRIMARY_PROBLEM_CLASS: INVALID_POINTER_READ DEFAULT_BUCKET_ID: INVALID_POINTER_READ STACK_TEXT: 0389f1dc EPFilter32!std::vector,std::allocator ::size+0xc INVALID_POINTER_READ_c0000005_Test.DLL!std::vector_std::pair_unsigned_int, unsigned_int_,std::allocator_std::pair_unsigned_int,unsigned_int___::size Following is the statement in the code where it fails const branch_info& b1 = en1.m_branches[i1]; where branch_info is std::pair and the en1.m_branches[i1] fetches me a pair value

    Read the article

  • App Pool crashes before loading mscorsvr. How to troubleshoot?

    - by codepoke
    I have an app pool that recycles every 29 hours, per default. It recycles smoothly 9 times out of 10, and I'm pretty sure the recycle itself is good for the app. Once every couple weeks the recycle does not work. The old worker process dies cleanly and the new worker process starts, but will not serve up content. Recycling the app pool again manually works like a charm. The failed worker process stops and dies cleanly and a second new worker process fires up and serves content perfectly. I took a crash dump against the failed worker process prior to recycling it, and DebugDiag found nothing to complain about. I tried to dig a little deeper using WinDBG, but mscorsvr/mscorwks is not loaded yet 15 minutes after the new process started. There are 14 threads running (4 async) and 20 pending client connections, but .NET is not even loaded into the process yet. Any suggestions where to poke and prod to find a root cause on this?

    Read the article

  • No COM1 port on hyper-v

    - by MPX
    I just made a fresh Windows 8.1 install and am trying to set-up a VM for kernel debugging. Therefore, I need to create a serial link to debug the VM using windbg. Usually I just simply add a new COM port and use it as a named pipe. However, I can't find any way to add this hardware. There is nothing relevant on the "add hardware list". What do I need to install this port then? Thanks in advance!

    Read the article

  • Moving from windows to linux

    - by rincewind
    I need to reconcile these 2 facts: I don't feel comfortable working on Linux; I need to develop software for Linux. Some background: I have a 10+ years of programming experience on Windows (almost exclusively C/C++, but some .NET as well), I was a user of FreeBSD at home for about 3 years or so (then had to go back to Windows), and I've never had much luck with Linux. And now I have to develop software for Linux. I need a plan. On Windows, you can get away with just knowing a programming language, an API you're coding against, your IDE (VisualStudio) and some very basic tools for troubleshooting (Depends, ProcessExplorer, DebugView, WinDbg). Everything else comes naturally. On Linux, it's a very different story. How the hell would I know what DLL (sorry, Shared Object) would load, if I link to it from Firefox plugin? What's the Linux equivalent of inserting __asm int 3/DebugBreak() in the source and running the program, and then letting the OS call a debugger? Why the hell release builds use something, called appLoader, while debug builds work somehow different? Worst of all: how to provision Linux development environment? So, taking into account that hatred is usually associated with not knowing enough, what would you recommend? I'm ok with Emacs and GCC. I need to educate myself as a Linux admin/user, and I need to learn proper troubleshooting tools (strace is cool, btw), equivalents to the ones I mentioned above. Do I need to do Linux From Scratch? Or do I need to just read some books (I've read "UNIX programming enviornment" by Kernighan and "Advanced Programming..." by Stevens, but I need to learn something more practical)? Or do I need to have some Linux distro on my home computer?

    Read the article

  • Access violation when accessing a COM object from .Net

    - by Groo
    Dear Sirs, I am sorry if the post is too long, but I would be happy if someone would at least point read the bolded titles, and point me in the right direction. I am having this problem for couple of days, but was unable to found the answer on the net. These are the things I have found out so far. 1. "Access violation" exception crushes my managed application My C# WinForms app sometimes closes with an "Access violation" exception ("Attempted to read or write protected memory"), right in the moment when selecting a TabPage in a windows form TabControl. From the stack trace (try/catch around Application.Run) I can see that the exception happens at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg), called inside UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData). -- Message: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. -- Stack trace: at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager .System.Windows.Forms.UnsafeNativeMethods .IMsoComponentManager.FPushMessageLoop (Int32 dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext .RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext .RunMessageLoop(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.Run(ApplicationContext context) at MyApp.Program.Main() 2. The faulting module seems to be a COM object (ChartFX Client Server 6.2) Using WinDbg (with SoS loaded), I caught it on the unmanaged side, inside ChartFX.ClientServer.Core.dll (that's a COM charting component we are using): (ca84.c98c): Access violation - code c0000005 (first chance) First chance exceptions are reported before any exception handling. This exception may be expected and handled. eax=00000000 ebx=06e67c38 ecx=06e67c38 edx=000018c6 esi=06e7df30 edi=317a9e80 eip=31666110 esp=0015e040 ebp=0015e08c iopl=0 nv up ei pl zr na pe nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010246 ChartFX_ClientServer_Core!Ordinal5507+0x97b7: 31666110 8a404d mov al,byte ptr [eax+4Dh] ds:0023:0000004d=?? [edit:] I also wasn't able to get the unmamanged stack details from WinDbg (it said "Stack unwind info not available"): 0:000 kP ChildEBP RetAddr WARNING: Stack unwind information not available. Following frames may be wrong. 0015e08c 3166288b ChartFX_ClientServer_Core!Ordinal5507+0x97b7 0015e394 3165a921 ChartFX_ClientServer_Core!Ordinal5507+0x5f32 0015e480 31678685 ChartFX_ClientServer_Core!Ordinal5496+0x26a 0015e568 3167bef4 ChartFX_ClientServer_Core!Ordinal5492+0x975 0015e668 316a356b ChartFX_ClientServer_Core!Ordinal5492+0x41e4 0015e77c 31709496 ChartFX_ClientServer_Core!Ordinal443+0x5745 0015e7d0 31707f70 ChartFX_ClientServer_Core!Ordinal2584+0x3cdc 0015e7f8 3170817d ChartFX_ClientServer_Core!Ordinal2584+0x27b6 0015e81c 3162fd76 ChartFX_ClientServer_Core!Ordinal2584+0x29c3 0015e86c 7719f8d2 ChartFX_ClientServer_Core!Ordinal899+0x6b6 0015e898 7719f794 USER32!GetMessageW+0x93 0015e910 771a06f6 USER32!GetWindowLongW+0x115 0015e940 771a069c USER32!CallWindowProcW+0x75 0015e960 747fcef4 USER32!CallWindowProcW+0x1b 0015e97c 747fd073 comctl32!Ordinal377+0x5c 0015e9e0 747fd027 comctl32!DefSubclassProc+0x92 0015ea04 747fd4e6 comctl32!DefSubclassProc+0x46 0015ea20 747fd073 comctl32!DefSubclassProc+0x505 0015ea84 747fd118 comctl32!DefSubclassProc+0x92 0015eae4 7719f8d2 comctl32!DefSubclassProc+0x137 3. Bug is not easy to reproduce (although it can be provoked usually in less than 5 min.) I have several Chart instances in several TabPages, and this usually happens while I am switching the tabs. I still don't know how to reproduce it, besides switching those tabs for several minutes before it happens, so I cannot use our source control to reliably find the build which didn't have this problem. I am accessing the charts through the managed AxChart wrapper class (derived from AxHost), which was created by VS designer automatically. 4. What should be my next step? If someone could point me to the next step I should do to find the actual cause, I would be very grateful. Experimenting (removing and returning code) does not do much good, because I don't know how to reproduce it, so it would take large amounts of time on each iteration just to convince myself that the bug is still there. I have found that people often suggest something like "switching compiler optimizations", but since the exception is not thrown deterministically, I don't want to simply rearrange some bytes and hope that it never returns. Thanks a lot in advance! Best regards, Groo

    Read the article

  • How to figure out who owns a worker thread that is still running when my app exits?

    - by Dave
    Not long after upgrading to VS2010, my application won't shut down cleanly. If I close the app and then hit pause in the IDE, I see this: The problem is, there's no context. The call stack just says [External code], which isn't too helpful. Here's what I've done so far to try to narrow down the problem: deleted all extraneous plugins to minimize the number of worker threads launched set breakpoints in my code anywhere I create worker threads (and delegates + BeginInvoke, since I think they are labeled "Worker Thread" in the debugger anyway). None were hit. set IsBackground = true for all threads While I could do the next brute force step, which is to roll my code back to a point where this didn't happen and then look over all of the change logs, this isn't terribly efficient. Can anyone recommend a better way to figure this out, given the notable lack of information presented by the debugger? The only other things I can think of include: read up on WinDbg and try to use it to stop anytime a thread is started. At least, I thought that was possible... :) comment out huge blocks of code until the app closes properly, then start uncommenting until it doesn't. UPDATE Perhaps this information will be of use. I decided to use WinDbg and attach to my application. I then closed it, and switched to thread 0 and dumped the stack contents. Here's what I have: ThreadCount: 6 UnstartedThread: 0 BackgroundThread: 1 PendingThread: 0 DeadThread: 4 Hosted Runtime: no PreEmptive GC Alloc Lock ID OSID ThreadOBJ State GC Context Domain Count APT Exception 0 1 1c70 005a65c8 6020 Enabled 02dac6e0:02dad7f8 005a03c0 0 STA 2 2 1b20 005b1980 b220 Enabled 00000000:00000000 005a03c0 0 MTA (Finalizer) XXXX 3 08504048 19820 Enabled 00000000:00000000 005a03c0 0 Ukn XXXX 4 08504540 19820 Enabled 00000000:00000000 005a03c0 0 Ukn XXXX 5 08516a90 19820 Enabled 00000000:00000000 005a03c0 0 Ukn XXXX 6 08517260 19820 Enabled 00000000:00000000 005a03c0 0 Ukn 0:008> ~0s eax=c0674960 ebx=00000000 ecx=00000000 edx=00000000 esi=0040f320 edi=005a65c8 eip=76c37e47 esp=0040f23c ebp=0040f258 iopl=0 nv up ei pl nz na po nc cs=0023 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00000202 USER32!NtUserGetMessage+0x15: 76c37e47 83c404 add esp,4 0:000> !clrstack OS Thread Id: 0x1c70 (0) Child SP IP Call Site 0040f274 76c37e47 [InlinedCallFrame: 0040f274] 0040f270 6baa8976 DomainBoundILStubClass.IL_STUB_PInvoke(System.Windows.Interop.MSG ByRef, System.Runtime.InteropServices.HandleRef, Int32, Int32)*** WARNING: Unable to verify checksum for C:\Windows\assembly\NativeImages_v4.0.30319_32\WindowsBase\d17606e813f01376bd0def23726ecc62\WindowsBase.ni.dll 0040f274 6ba924c5 [InlinedCallFrame: 0040f274] MS.Win32.UnsafeNativeMethods.IntGetMessageW(System.Windows.Interop.MSG ByRef, System.Runtime.InteropServices.HandleRef, Int32, Int32) 0040f2c4 6ba924c5 MS.Win32.UnsafeNativeMethods.GetMessageW(System.Windows.Interop.MSG ByRef, System.Runtime.InteropServices.HandleRef, Int32, Int32) 0040f2dc 6ba8e5f8 System.Windows.Threading.Dispatcher.GetMessage(System.Windows.Interop.MSG ByRef, IntPtr, Int32, Int32) 0040f318 6ba8d579 System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame) 0040f368 6ba8d2a1 System.Windows.Threading.Dispatcher.PushFrame(System.Windows.Threading.DispatcherFrame) 0040f374 6ba7fba0 System.Windows.Threading.Dispatcher.Run() 0040f380 62e6ccbb System.Windows.Application.RunDispatcher(System.Object)*** WARNING: Unable to verify checksum for C:\Windows\assembly\NativeImages_v4.0.30319_32\PresentationFramewo#\7f91eecda3ff7ce478146b6458580c98\PresentationFramework.ni.dll 0040f38c 62e6c8ff System.Windows.Application.RunInternal(System.Windows.Window) 0040f3b0 62e6c682 System.Windows.Application.Run(System.Windows.Window) 0040f3c0 62e6c30b System.Windows.Application.Run() 0040f3cc 001f00bc MyApplication.App.Main() [C:\code\trunk\MyApplication\obj\Debug\GeneratedInternalTypeHelper.g.cs @ 24] 0040f608 66c421db [GCFrame: 0040f608] EDIT -- not sure if this helps, but the main thread's call stack looks like this: [Managed to Native Transition] > WindowsBase.dll!MS.Win32.UnsafeNativeMethods.GetMessageW(ref System.Windows.Interop.MSG msg, System.Runtime.InteropServices.HandleRef hWnd, int uMsgFilterMin, int uMsgFilterMax) + 0x15 bytes WindowsBase.dll!System.Windows.Threading.Dispatcher.GetMessage(ref System.Windows.Interop.MSG msg, System.IntPtr hwnd, int minMessage, int maxMessage) + 0x48 bytes WindowsBase.dll!System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame frame = {System.Windows.Threading.DispatcherFrame}) + 0x85 bytes WindowsBase.dll!System.Windows.Threading.Dispatcher.PushFrame(System.Windows.Threading.DispatcherFrame frame) + 0x49 bytes WindowsBase.dll!System.Windows.Threading.Dispatcher.Run() + 0x4c bytes PresentationFramework.dll!System.Windows.Application.RunDispatcher(object ignore) + 0x17 bytes PresentationFramework.dll!System.Windows.Application.RunInternal(System.Windows.Window window) + 0x6f bytes PresentationFramework.dll!System.Windows.Application.Run(System.Windows.Window window) + 0x26 bytes PresentationFramework.dll!System.Windows.Application.Run() + 0x1b bytes I did a search on it and found some posts related to WPF GUIs hanging, and maybe that'll give me some more clues.

    Read the article

  • SYSTEM_HANDLE_INFORMATION structure

    - by striker
    From where does this structure originates? I know that it is declared in famous ntdll.h and is a part of undocumented windows API. But isn't it vary between different versions of windows? Is there a way to dump this structure from working system? I tried 'dt SYSTEM_HANLDE_INFORMATION' in Windbg and 'type SYSTEM_HANLDE_INFORMATION' in SoftIce but all I get is 'no such symbol' message. I also dumped ntoskrnl.pdb with PdbDump.exe and searched among the dumped structures - and could not find neither SYSTEM_HANLDE_INFORMATION nor SYSTEM_HANLDE. Could you help me?

    Read the article

  • Core dump equivalence for Java

    - by m3rLinEz
    So far I have learned about generating thread dump and heap dump using jstack and and jmap respectively. However, jstack thread dump contains only texts describing the stack on each thread. And opening heap dump (.hprof file) with Java VisualVM only shows the objects allocated in the heap. What I actually want is to be able see the stack, to switch to particular stack frame, and watch local variables. This kind of post-mortem debugging can be done normally with tools like WinDbg, gdb and a core file (for a native C++ program.) I wonder if such 'core' file (which will allow me to debug in non-live environment) exists in Java?

    Read the article

  • .NET Debugging - System.Threading.ExecutionContext.runTryCode

    - by moogs
    We have this bug that only appears 30% of the time for the Release build. Opening the crash dump in WinDbg (snipped "!analyze -v" output): FAULTING_IP: +4 00000000`00000004 ?? ??? EXCEPTION_RECORD: ffffffffffffffff -- (.exr 0xffffffffffffffff) ExceptionAddress: 0000000000000004 ExceptionCode: c0000005 (Access violation) ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 0000000000000008 Parameter[1]: 0000000000000004 Attempt to execute non-executable address 0000000000000004 ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s. WRITE_ADDRESS: 0000000000000004 MANAGED_STACK: (TransitionMU) 0000000024B9E370 000007FEEDA1DD38 mscorlib_ni!System.Threading.ExecutionContext.runTryCode(System.Object)+0x178 (TransitionUM) (TransitionMU) 0000000024B9DFB0 000007FF00439010 MyLibrary!DocInfo.IsStatusOK()+0x30 Now, IsStatusOK() just calls PrintSystemJobInfo.Get(), but that doesn't seem to even appear in the stack. Any ideas on how to debug this? I'm sure runTryCode() is really not the problem...but..I'm stuck. Thanks! (I'm really groping here).

    Read the article

  • When debugging on WinCE, how can I set Visual Studio to always load symbol files it knows about?

    - by tsellon
    I'm debugging a WinCE, C++ program in Visual Studio across an ActiveSync connection. Every time I start the process it fails to load symbol information. However, if I right click on the module and hit 'Load Symbols' it correctly locates the symbol information without any further prompting from me. Is there a way that I can set Visual Studio to either: (a) automatically load this symbol information, or (b) automatically break the process into the debugger once it's loaded (similar to what windbg does)? I'm guessing there's a setting somewhere, but I've yet to find it. Update: I forgot to mention in the original question that I'm not debugging with the instance of Visual Studio that created the exe.

    Read the article

  • msvcrt: memory usage goes wild, but not under debugger

    - by al_miro
    I have a C++ code compiled with Intel compiler, 32bit, in MS VC6 mode, so using either msvcrt.dll or msvcrtd.dll. The process makes heavy memory allocation and deallocation. I monitor the memory usage with WMI and look at VirtualSize and WorkingSetSize. with debug runtime (msvcrtd.dll): virtual constant 1.7GB, working constant 1.2GB with non-debug runtime (msvcrt.dll): virtual raising 1.7-- 2.1GB, working raising 1.2-1.4GB with non-debug runtime but under debugger (windbg): virtual constant 1.7GB, working constant At 2.1 GB virtual the process is crashing (as expected). But why would the virtual usage increase only with (non-debug) msvcrt.dll and only if not under debugger? In all cases compilation flags are identical, only runtime libs are different.

    Read the article

  • Do minidump files contain the timestamp of the crash?

    - by Roger Lipscombe
    The MiscInfoStream in a minidump file contains the process create time. I'd like to find out how long the process has been running for before the crash. Does a minidump file contain the exception timestamp anywhere? WinDbg on this dump file displays the following, which implies that it's in there somewhere... Debug session time: Tue Dec 29 15:49:20.000 2009 (GMT+0) System Uptime: not available Process Uptime: 0 days 0:33:03.000 Note that today's Mar 15, so this is almost certainly the timestamp of the crash. I'd like a programmatic way to retrieve that value and the "Process Uptime" value. I found the MINIDUMP_MISC_INFO_3 structure, which contains some timezone information, but it doesn't seem to contain the exception time.

    Read the article

  • memory usage in C# (.NET) app is very high, until I call System.GC.Collect()

    - by Chris Gray
    I've written an app that spins a few threads each of which read several MB of memory. Each thread then connects to the Internet and uploads the data. this occurs thousands of times and each upload takes some time I'm seeing a situation where (verified with windbg/sos and !dumpheap) that the Byte[] are not getting collected automatically, causing 100/150MB of memory to be reported in task manager if I call System.GC.Collect() i'm seeing a huge drop in memory, a drop of over 100MB I dont like calling System.GC.Collect() and my PC has tons of free memory. however if anyone looks at TaskManager they're going to be concerned, thinking my app is leaking horribly. tips?

    Read the article

  • Cannot run 32bit compiled WPF applications on Windows 7 64bit

    - by adriaanp
    I created a WPF project in VS2008 and compiled it with Any CPU, x64 and x86. Any CPU and x64 works, but compiling to x86 the application is hanging when running through VS2008 and crashing when running without debugging. Debugging it with WinDbg I can see a StackOverflowException and sometimes a MissingMethodException relating to WPF methods. Common sense is telling something here that the CLR is not loading the correct assemblies or something when running 32bit WPF apps. I tried reinstalling .NET Framework 3.5 SP1, but it does not fix the problem. I don't know how to go about checking if the correct assemblies are loaded or used. Any ideas? UPDATE: Not a real solution but the best I could do quickly was to reinstall Windows 7

    Read the article

  • Why does Windows Explorer search freeze when I have an unrelated program paused in a debugger

    - by Evgeny
    While debugging my program, whether it's an ASP.NET application or a .NET console EXE and I have the debugger paused at a breakpoint I try to find a file in Windows Explorer. Either pressing WinKey+F or selecting search from the context menu freezes Windows Explorer - until I resume the program being debugged. My program has nothing to do with Windows Explorer! In fact, this happens in Visual Studio 2008 even with the simplest console EXE (WriteLine and ReadLine). I can't repro it with this simple EXE in WinDbg, but it does happen in with WinDb debugging an ASP.NET app. Why does this happen and how do I fix it? It's bloody annoying, especially when you don't realise what's going on. This is on Windows XP x64 SP2, running a .NET 3.5 application.

    Read the article

  • Stagnating in programming

    - by Coder
    Time after time this question came up in my mind, but up until today I wasn't thinking about it much. I have been programming for maybe around 8 years now, and for the last two years it seems I'm not as keen to pick up new technologies anymore. Maybe that's a burnout or something, but I'd say it's experience and what I like, that's stopping me from running after the latest and greatest. I'm C++ developer, by this I mean, I love close to metal programming. I have no problems tracing problems through assembly, using tools like WinDbg or HexView. When I use constructs, I think about how they are realized underneath, how the bits are set and unset under the hood. I love battling with complex threading problems and doing everything hardcore way, even by hand if the regular solutions seem half baked. But I also love the C++0x stuff, and use it a lot. And all C++ code as long as it's not cumbersome compared to C counterparts, sometimes I also fall back to sort of "Super C" if the C++ way is ugly. And then there are all other developers who seem to be way more forward looking, .Net 4.0 MVC, WPF, all those Microsoft X#s, LINQ languages, XML and XSLT, mobile devices and so on. I have done a considerable amount of .NET, SQL, ASPX programming, but the further I go, the less I want to try those technologies. Is that bad? Almost every day I hear people saying that managed code is the only way forward, WPF is the way to go. I hear that C++ is godawful, and you can't code anything in it that's somewhat stable. But I don't buy it. With the experience I have, and the knowledge of how native code is compiled and executes, I can say I find it extremely rare that C++ code is unstable, or leaks, or causes crashes that takes more than 30 seconds to identify and fix. And to tell the truth, I've seen enough problems with other "cool" languages that I'd say C++ is even more stable and production proof than the safe languages, at least for me. The only thing that scares me in C++ is new frameworks, I don't trust them, and I use them extra sparingly. STL - yes, ATL - very sparingly, everything else... Well, not very keen on it. Most huge problems I've ran into, all were related to frameworks, not the language itself. Some overrided operator here, bad hierarchy there, poor class design here, mystical castings there. Other than that, C/C++ (yes, I use them together) still seems a very controlled and stable way to develop applications. Am I stagnating? Should I switch a profession, or force myself in all that marketing hype? Are there more developers who feel the same way?

    Read the article

  • certutil -ping fails with 30 seconds timeout - what to do?

    - by mark
    The certificate store on my Win7 box is constantly hanging. Observe: C:\1.cmd C:\certutil -? | findstr /i ping -ping -- Ping Active Directory Certificate Services Request interface -pingadmin -- Ping Active Directory Certificate Services Admin interface C:\set PROMPT=$P($t)$G C:\(13:04:28.57)certutil -ping CertUtil: -ping command FAILED: 0x80070002 (WIN32: 2) CertUtil: The system cannot find the file specified. C:\(13:04:58.68)certutil -pingadmin CertUtil: -pingadmin command FAILED: 0x80070002 (WIN32: 2) CertUtil: The system cannot find the file specified. C:\(13:05:28.79)set PROMPT=$P$G C:\ Explanations: The first command shows you that there are –ping and –pingadmin parameters to certutil Trying any ping parameter fails with 30 seconds timeout (the current time is seen in the prompt) This is a serious problem. It screws all the secure communication in my app. If anyone knows how this can be fixed - please share. Thanks. P.S. 1.cmd is simply a batch of these commands: certutil -? | findstr /i ping set PROMPT=$P($t)$G certutil -ping certutil -pingadmin set PROMPT=$P$G EDIT1 I have succeeded to pin down the single windows API that causes the problem - DsGetDcName According to the windbg, the certutil -ping invokes it like so: PDOMAIN_CONTROLLER_INFO pdci; DWORD ret = ::DsGetDcName(NULL, NULL, NULL, NULL, DS_DIRECTORY_SERVICE_PREFERRED, &pdci); On my workstation it times out for 30 seconds and then returns error code 1355, which is ERROR_NO_SUCH_DOMAIN No domain controller is available for the specified domain or the domain does not exist. On another machine, which is accidentally a windows server 2003, it returns almost immediately with the correct domain controller name inside the returned DOMAIN_CONTROLLER_INFO structure. Now the question is what is missing on my workstation for that API to find the correct domain controller?

    Read the article

  • Crash dump analysis

    - by Ryan Ries
    I hope this isn't a stupid question, and if it is, then I want to at least get it over with so I don't feel so dumb in the future. Here we are, loading up a Windows crash dump with Windbg. Here are the first few lines of the debugger output: 0: kd> .dumpdebug ----- 64 bit Kernel Summary Dump Analysis DUMP_HEADER64: MajorVersion 0000000f MinorVersion 00001db1 ... The MinorVersion I mostly understand. It's hexadecimal and it translates to 7601 in decimal. Windows admins would already be able to tell from that that this must be either a Win7 x64 machine or a 2k8 R2 machine with SP1. But isn't 7601 the build number? It's supposed to be Major.Minor.Build/Revision... right? Also I don't understand the MajorVersion. It should be 6. This version of Windows is 6. But isn't 0000000f in hexadecimal 15 in decimal? The full version string of this version of Windows, when you launch the Command Prompt for instance, is 6.1.7601. If 7601 is the MinorVersion, then what is 1 and what is 6? And why does the crash dump say 0F?

    Read the article

  • How can I debug user mode driver failures in Windows 8

    - by Tom
    I have a 32 GB SD Card. Whenever I insert this card in to my newly upgraded Windows 8 laptop the OS stops responding normally. Metro Apps won't work. The system may or may not log in. Desktop apps may or may not be able to do things. When I remove the card and restart then all is fine. As soon as I put the card back in, the system starts misbehaving again. I've run Windows Update, so I have the latest drivers from Microsoft. This does not occur with the 8 GB cards I have. Unfortunately I only have one 32 GB card, so I can't test with others. From examining the system event log I've determined this is happening due to a user mode driver failure. How can I best debug this issue from here? How can I figure out which driver this is related to? Will there be a Dr. Watson crash dump somewhere? Details - System - Provider [ Name] Microsoft-Windows-DriverFrameworks-UserMode [ Guid] {2E35AAEB-857F-4BEB-A418-2E6C0E54D988} EventID 10110 Version 1 Level 1 Task 64 Opcode 0 Keywords 0x2000000000000000 - TimeCreated [ SystemTime] 2012-10-29T00:51:57.532718300Z EventRecordID 40417 Correlation - Execution [ ProcessID] 1056 [ ThreadID] 3796 Channel System Computer thebrain - Security [ UserID] S-1-5-18 - UserData - UMDFHostProblem [ lifetime] {811E3DC4-FBC6-420B-ABCC-AD7505A36F3B} - Problem [ code] 3 [ detectedBy] 2 ExitCode 3 - Operation [ code] 259 Message 72448 Status 4294967295 Edit 1 So I tried using Debug View from SysInternals (you can get it here: http://technet.microsoft.com/en-us/sysinternals/bb896647.aspx). That gave me this information: which is not especially helpful. Then I tried connecting WinDbg to WUDFHost.exe (the process that seems to host user mode drivers) to see if it could catch the error. Get it here: http://msdn.microsoft.com/en-US/windows/hardware/hh852363 Instructions: http://msdn.microsoft.com/en-US/library/windows/hardware/ff554716(v=vs.85).aspx That didn't help much. It didn't catch any exceptions as I'd hoped (which would point me to the cause of the crash at least). Here's the stack of one of the threads:

    Read the article

  • WIN7 constant BSOD 0x7B on boot, not producing any dump files where to go from here?

    - by prayingpantis
    So my one win 7 pc has been getting a BSOD on boot (roughly a sec after load screen starts) after a power failure. The complete stop code is 0x0000007B (0x80786B58, 0xC0000034,0x00000000,0x00000000) I've searched for quite a while now on the net and it seems like most people gave up after gettting 0x7B and no dump files. What I've tried so far: startup repair - reports it cannot repair computer automatically. BadPatch is reported somewhere in a problem signature contained in the problem details. startup repair with a WIN 7 CD - also fails, I can't recall what the error was, but it was not the same as the error produced with the start up tool shipped with the version of WIN 7 installed on my machine (I think the text had something ACL-ish contained in it) used a boot disk (Hiren's boot iso) - I used it to enable the CrashDump registry key and then after BSOD, read the HDD's dump locations but it was empty. Note, I'm quite sure the registry keys I edited are the correct ones, since the reboot on BSOD option was enabled by default and after I changed the regkey controlling this functionalitty to 0 the BSOD stayed after I booted again. check disk - works and returns no problems, also it seems I'm able to access all my files on the HDD. mem test - works and returns no errors So I'm not sure what else I can do to figure out what is the problem here. I read somewhere that you can use WINDBG to remote debug another PC, but I'm not sure if this is possible since the OS isn't even loaded yet? Also the last driver change I made on the system was installing a video driver, but I had no problems with it and were able to reboot several times until the power outage happened and the BSOD appeared. Any help or guidance for a way to DEBUG this problem would really be appreciated (I'm not really that keen to try a whole bunch of random fixes, I'd rather try and narrow down the problem first).

    Read the article

  • Uncatchable AccesViolationException

    - by Roy
    Hi all, I'm getting close to desperate.. I am developing a field service application for Windows Mobile 6.1 using C# and quite some p/Invoking. (I think I'm referencing about 50 native functions) On normal circumstances this goes without any problem, but when i start stressing the GC i'm getting a nasty 0xC0000005 error witch seems uncatchable. In my test i'm rapidly closing and opening a dialog form (the form did make use of native functions, but for testing i commented these out) and after a while the Windows Mobile error reporter comes around to tell me that there was an fatal error in my application. My code uses a try-catch around the Application.Run(masterForm); and hooks into the CurrentDomain.UnhandledException event, but the application still crashes. Even when i attach the debugger, visual studio just tells me "The remote connection to the device has been lost" when the exception occurs.. Since I didn't succeed to catch the exception in the managed environment, I tried to make sense out of the Error Reporter log file. But this doesn't make any sense, the only consistent this about the error is the application where it occurs in. The thread where the application occurs in is unknown to me, the module where the error occurs differs from time to time (I've seen my application.exe, WS2.dll, netcfagl3_5.dll and mscoree3_5.dll), even the error code is not always the same. (most of the time it's 0xC0000005, but i've also seen an 0X80000002 error, which is a warning accounting the first byte?) I tried debugging through bugtrap, but strangely enough this crashes with the same error code (0xC0000005). I tried to open the kdmp file with visual studio, but i can't seem to make any sense out of this because it only shows me disassembler code when i step into the error (unless i have the right .pbb files, which i don't). Same goes for WinDbg. To make a long story short: I frankly don't have a single clue where to look for this error, and I'm hoping some bright soul on stackoverflow does. I'm happy to provide some code but at this moment I don't know which piece to provide.. Any help is greatly appreciated!

    Read the article

  • jQuery1.4.2 $.ajax crashes IE6/7

    - by Kenny Eliasson
    Hello there! I'm having a really hard time debugging one of our latest reported bugs. The problem occurs "randomly", not on every page load, sometimes I can "click" around for a minute or two before IE6/7 crashes. By crash I mean that the IE-window shuts down and I get the option to send the crash info to Microsoft. In FF, Chrome, Safari, IE8 everything is working perfectly. What the page does is issuing 2 AJAX Jsonp calls and building some menus with the data returned. The data brought back can be from ~500b to approx. 35kb. The JSON is valid (else it wouldn't have loaded at all in FF etc), and as i told previous, it works for when navigating around the site soemtimes in IE6/7. I've tested to comment out the callbacks, still crashes. If I remove the $.ajax calls the page will work again. Whats strange is that if I downgrade to jQuery 1.3.2 everything works in all browsers including IE6/7. I've taken the crash-logs and looked at them in WinDbg and what happens seems to be a NULL POINTER reference. The last entries of the stack trace is as follows mshtml!CTreePos::SourceIndex+0x9 mshtml!CMarkup::InsertElementInternal+0x3a8 mshtml!CDoc::InsertElement+0x98 mshtml!CDocument::get_implementation+0x144 Anyone having a clue what could cause this?

    Read the article

  • x86 .net application with system.OutOfMemoryException

    - by Allen
    Hi,Guys I got OutOfMemoryException after the app running for 1 day, the app totally use 1.5G memory , all consumed by managed heap, gen 2 used 200mb , and LOB used 1.3mb, however the weired thing is, 900mb of space are Free. from perf counter I saw there had number of gen 2 gc collection happened, why GC collector cannot collect those 900mb free space in gen2 and LOB? I'm really appreicate for your help. following info are from windbg: 0:000> !eeheap -gc Number of GC Heaps: 1 generation 0 starts at 0x183153f0 generation 1 starts at 0x182aa834 generation 2 starts at 0x02131000 ephemeral segment allocation context: none segment begin allocated size 02130000 02131000 0312f284 0xffe284(16769668) 07750000 07751000 0874fc5c 0xffec5c(16772188) 09e30000 09e31000 0ae2fc2c 0xffec2c(16772140) 0b230000 0b231000 0c22ffec 0xffefec(16773100) 0c230000 0c231000 0d22f6f0 0xffe6f0(16770800) 0d230000 0d231000 0e22ea10 0xffda10(16767504) 0e230000 0e231000 0f22c1c4 0xffb1c4(16757188) 10390000 10391000 1138ddf4 0xffcdf4(16764404) 154e0000 154e1000 164da90c 0xff990c(16750860) 34aa0000 34aa1000 35a9dbfc 0xffcbfc(16763900) 7aca0000 7aca1000 7bc9edfc 0xffddfc(16768508) 49760000 49761000 4a75ef64 0xffdf64(16768868) 7bca0000 7bca1000 7cc99bac 0xff8bac(16747436) 17a70000 17a71000 183313fc 0x8c03fc(9176060) Large object heap starts at 0x03131000 segment begin allocated size 03130000 03131000 041250c8 0xff40c8(16728264) 08920000 08921000 099102f8 0xfef2f8(16708344) .... .... 4c760000 4c761000 4d71d578 0xfbc578(16500088) 1bb10000 1bb11000 1ca110d0 0xf000d0(15728848) 57760000 57761000 5862d7f8 0xecc7f8(15517688) Total Size: Size: 0x5ab13450 (1521562704) bytes. ------------------------------ GC Heap Size: Size: 0x5ab13450 (1521562704) bytes. 0:000> !dumpheap -stat total 0 objects Statistics: MT Count TotalSize Class Name 73037c78 1 12 System.Configuration.GenericEnumConverter 73036da0 1 12 System.Configuration.InfiniteIntConverter .... .... 69161c3c 35025 6809420 System.Windows.EffectiveValueEntry[] 69164748 54 12471072 MS.Internal.WeakEventTable+EventKey[] 710e2228 9540 190389260 System.Byte[] 710dd2b8 1317031 339257932 System.String 0035a670 6427 902224056 Free Total 3615631 objects

    Read the article

  • Access Violation in std::pair

    - by sameer karjatkar
    I have an application which is trying to populate a pair. Out of nowhere the application crashes. The Windbg analysis on the crash dump suggests: PRIMARY_PROBLEM_CLASS: INVALID_POINTER_READ DEFAULT_BUCKET_ID: INVALID_POINTER_READ STACK_TEXT: 0389f1dc EPFilter32!std::vector<std::pair<unsigned int,unsigned int>,std::allocator<std::pair<unsigned int,unsigned int> > >::size+0xc INVALID_POINTER_READ_c0000005_Test.DLL!std::vector_std::pair_unsigned_int, unsigned_int_,std::allocator_std::pair_unsigned_int,unsigned_int_____::size Following is the code snap in the code where it fails: for (unsigned i1 = 0; i1 < size1; ++i1) { for (unsigned i2 = 0; i2 < size2; ++i2) { const branch_info& b1 = en1.m_branches[i1]; //Exception here :crash const branch_info& b2 = en2.m_branches[i2]; } } where branch_info is std::pair<unsigned int,unsigned int> and the en1.m_branches[i1] fetches me a pair value.

    Read the article

< Previous Page | 1 2 3 4 5  | Next Page >