Search Results

Search found 175 results on 7 pages for 'xe'.

Page 4/7 | < Previous Page | 1 2 3 4 5 6 7  | Next Page >

• XenServer 5.5 local storage problem

  - by Jason Nerer

  Hi community, I have the following problem with a Citrix XenServer 5.5. I had to physically move the host, so I shut down all machines via console: xe vm-shutdown force=true vm=my-machine-uuis-s After that I shut down the machine itself by issuing: halt After the reboot today the local storage repository is unplugged. I was trying to repair it via XenCenter, but I don't trust this one. So I tried: [root@xenserver ~]# xe pbd-list uuid ( RO) : ef6e2f3b-5825-393c-23e1-391d105c87ec host-uuid ( RO): c4bcf09c-2e52-448f-8210-df5d13bd33a9 sr-uuid ( RO): 2fb3be9c-075c-53ed-acb6-42f0c4ad0614 device-config (MRO): device: /dev/disk/by-id/scsi-SATA_WDC_WD5001ABYS-_WD-WCAS83698154,/dev/disk/by-id/scsi-SATA_WDC_WD5001ABYS-_WD-WCAS83694262 currently-attached ( RO): false To reattach the storage I issued: xe pbd-plug uuid=ef6e2f3b-5825-393c-23e1-391d105c87ec That one is running now for a while but not talking to me. The local repo has around 1TB. Should I wait, or are there any other options to reattach the local repo? What could have caused this problem? Any ideas? Thx. J

  Read the article

• determining the starting speed for an accelerated animation (in flash/actionscript but it's a math question)

  - by vulkanino

  This question burns my brain. I have an object on a plane, but for the sake of simplicity let's work just on a single dimension, thus the object has a starting position xs. I know the ending position xe. The object has to move from starting to ending position with an accelerated (acceleration=a) movement. I know the velocity the object has to have at the ending position (=ve). In my special case the ending speed is zero, but of course I need a general formula. The only unknown is the starting velocity vs. The objects starts with vs in xs and ends with ve in xe, moving along a space x with an acceleration a in a time t. Since I'm working with flash, space is expressed in pixels, time is expressed in frames (but you can reason in terms of seconds, it's easy to convert knowing the frames-per-second). In the animation loop (think onEnterFrame) I compute the new velocity and the new position with (a=0.4 for example): vx *= a (same for vy) x += vx (same for y) I want the entire animation to last, say, 2 seconds, which at 30 fps is 60 frames. Now you know that in 60 frames my object has to move from xs to xe with a constant deceleration so that the ending speed is 0. How do I compute the starting speed vs? Maybe there's a simpler way to do this in Flash, but I am now interested in the math/physics behind this.

  Read the article

• Cannot access a very specific site from my router

  - by DJDarkViper

  This is a problem for me because this site is important to me. It's MY website. And sadly my email is hosted on my site (which I cant access either) When I try to access my website when connected to my Linksys E3000 router, these days it simply just doesn't go through. When I ping it, its all Request Timed Out, and when I tracert C:\Users\Kyle>tracert blackjaguarstudios.com Tracing route to blackjaguarstudios.com [199.188.204.228] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms CISCO26565 [192.168.1.1] 2 16 ms 15 ms 11 ms 11.4.64.1 3 11 ms 9 ms 11 ms rd1cs-ge1-2-1.ok.shawcable.net [64.59.169.2] 4 20 ms 21 ms 22 ms 66.163.76.98 5 37 ms 36 ms 35 ms rc1nr-tge0-9-2-0.wp.shawcable.net [66.163.77.54] 6 112 ms 84 ms 85 ms rc2ch-pos9-0.il.shawcable.net [66.163.76.174] 7 86 ms 89 ms 90 ms rc4as-ge12-0-0.vx.shawcable.net [66.163.64.46] 8 90 ms 84 ms 85 ms eqix.xe-3-3-0.cr2.iad1.us.nlayer.net [206.223.115.61] 9 97 ms 97 ms 99 ms xe-3-3-0.cr1.atl1.us.nlayer.net [69.22.142.105] 10 128 ms 128 ms 126 ms ae1-40g.ar1.atl1.us.nlayer.net [69.31.135.130] 11 101 ms 97 ms 96 ms as16626.xe-2-0-5-102.ar1.atl1.us.nlayer.net [69.31.135.46] 12 100 ms 97 ms 197 ms 6509-sc1.abstractdns.com [207.210.114.166] 13 * * * Request timed out. 14 * * * Request timed out. 15 * * * Request timed out. 16 * * * Request timed out. 17 * * * Request timed out. 18 * * * Request timed out. 19 * * * Request timed out. 20 * * * Request timed out. 21 * * * Request timed out. 22 * * * Request timed out. 23 * * * Request timed out. 24 * * * Request timed out. 25 * * * Request timed out. 26 * * * Request timed out. 27 * * * Request timed out. 28 * * * Request timed out. 29 * * * Request timed out. 30 * * * Request timed out. Trace complete. C:\Users\Kyle> SHAW Cable being my ISP. Figuring this was all something to do with some setting I made on the router, I reset the thing back to factory defaults. Nope. So I'm at a bit of a loss what to do here, as NO device (Computers, Laptops, Tablets, Phones, PS3/ 360, etc) can access my site or its features, so it's not just my computer either. But every other site is just fine. When I connect to my neighbors router, the site comes up just fine. And shes with SHAW as well. What should I do?!

  Read the article

• Latency issues over internet

  - by Stevo

  I have a Media Temple server running http://www.popsapp.com which I am having latency issues with. If I run ab -n 100 -c 10 http://www.popsapp.com/ from my local machine I get very bad stats e.g.: Connection Times (ms) min mean[+/-sd] median max Connect: 179 3375 2185.4 2837 12525 Processing: 0 505 693.3 229 4564 Waiting: 0 50 115.4 0 415 Total: 964 3880 2094.5 3159 12608 Whereas if I run it from a rackspace server I have I get this: Connection Times (ms) min mean[+/-sd] median max Connect: 75 76 3.3 75 84 Processing: 235 339 81.4 315 579 Waiting: 159 249 61.7 234 411 Total: 311 415 82.0 390 663 To me this looks like intermediate network issues, but I wouldn't have thought it could be this bad! Any ideas how I can improve it? Here's the trace route traceroute to www.popsapp.com (216.70.105.183), 64 hops max, 52 byte packets 1 192.168.2.1 (192.168.2.1) 3.738 ms 0.953 ms 1.418 ms 2 host-92-22-112-1.as13285.net (92.22.112.1) 27.409 ms 97.093 ms 78.858 ms 3 host-78-151-225-141.static.as13285.net (78.151.225.141) 61.830 ms 170.484 ms 113.288 ms 4 host-78-151-225-80.static.as13285.net (78.151.225.80) 101.513 ms host-78-151-225-22.static.as13285.net (78.151.225.22) 64.718 ms 47.309 ms 5 xe-11-1-0-rt001.sov.as13285.net (62.24.240.14) 98.381 ms 114.424 ms xe-11-1-0-rt001.the.as13285.net (62.24.240.6) 96.592 ms 6 host-78-144-1-59.as13285.net (78.144.1.59) 36.799 ms host-78-144-1-63.as13285.net (78.144.1.63) 178.426 ms host-78-144-1-61.as13285.net (78.144.1.61) 85.516 ms 7 xe-10-0-0-scr010.thn.as13285.net (78.144.0.224) 88.158 ms host-78-144-0-207.as13285.net (78.144.0.207) 35.132 ms host-78-144-0-153.as13285.net (78.144.0.153) 121.464 ms 8 limelight-pp-thn.as13285.net (78.144.3.6) 46.987 ms limelight-pp-sov.as13285.net (78.144.5.18) 108.025 ms 40.169 ms 9 tge11-1.fr4.lga.llnw.net (69.28.172.149) 109.603 ms ve6.fr4.lon.llnw.net (68.142.88.221) 121.681 ms 38.609 ms 10 tge11-1.fr4.lga.llnw.net (69.28.172.149) 111.981 ms 113.744 ms 111.711 ms 11 tge8-2.fr4.iad.llnw.net (69.28.189.34) 117.102 ms ve5.fr4.iad.llnw.net (69.28.171.214) 184.372 ms 146.178 ms 12 cr02-1-1.iad1.net2ez.com (65.97.48.254) 182.880 ms net2ez.tge2-2.fr4.iad.llnw.net (69.28.156.170) 150.489 ms 121.862 ms 13 65.97.50.26 (65.97.50.26) 184.620 ms cr02-1-1.iad1.net2ez.com (65.97.48.254) 156.136 ms 131.963 ms 14 65.97.50.26 (65.97.50.26) 124.899 ms 126.537 ms 123.322 ms 15 e1.4.as02.iad01.mtsvc.net (70.32.64.246) 134.647 ms 186.307 ms 211.059 ms 16 popsapp.com (216.70.105.183) 118.876 ms 113.189 ms vzx258.mediatemple.net (216.70.104.17) 131.012 ms Looks to me like there is significant delay across the limelight network. This would explain why the traceroute via my rackspace server doesn't suffer from the same delay as they will be using their own trunk.

  Read the article

• can't use periods in ServerName [Lion Apache installation]

  - by punchfacechamp

  I can access my host like this… http://keggyshop but can't use periods… http://keggyshop.dev here's my virtual host directive… <VirtualHost *:80> ServerName keggyshop ServerAlias keggyshop.dev DocumentRoot "~/sites/2012/keggy/web/pages/keggy/120528/sandbox/public" <Directory "~/sites/2012/keggy/web/pages/keggy/120528/sandbox/public"> Options Includes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> host file 127.0.0.1 keggyshop 127.0.0.1 keggyshop.dev traceroute for keggyshop… user$ traceroute keggyshop traceroute to keggyshop (192.168.1.184), 64 hops max, 52 byte packets 1 keggyshop (192.168.1.184) 1.188 ms 0.683 ms 0.747 ms traceroute for keggyshop.dev… user$ traceroute keggyshop.dev traceroute: Warning: keggyshop.dev has multiple addresses; using 184.106.15.239 traceroute to keggyshop.dev (184.106.15.239), 64 hops max, 52 byte packets 1 * 192.168.1.1 (192.168.1.1) 0.856 ms 0.568 ms 2 10.81.192.1 (10.81.192.1) 15.232 ms 7.002 ms 7.936 ms 3 gig-0-3-0-6-nycmnya-rtr2.nyc.rr.com (24.29.97.122) 7.962 ms 7.813 ms 7.712 ms 4 bun101.nycmnytg-rtr001.nyc.rr.com (184.152.112.107) 10.999 ms 14.001 ms 15.466 ms 5 bun6-nycmnytg-rtr002.nyc.rr.com (24.29.148.250) 11.231 ms 17.321 ms 12.745 ms 6 107.14.19.24 (107.14.19.24) 13.972 ms 11.704 ms 16.477 ms 7 ae-1-0.pr0.nyc30.tbone.rr.com (66.109.6.161) 9.237 ms 11.896 ms 107.14.19.153 (107.14.19.153) 7.481 ms 8 xe-5-0-6.ar2.ewr1.us.nlayer.net (69.31.94.57) 16.682 ms 11.791 ms 11.981 ms 9 ae3-90g.cr1.ewr1.us.nlayer.net (69.31.94.117) 12.977 ms 15.706 ms 9.709 ms 10 xe-5-0-0.cr1.ord1.us.nlayer.net (69.22.142.74) 30.473 ms 30.497 ms 31.750 ms 11 ae1-20g.ar1.ord6.us.nlayer.net (69.31.110.250) 36.699 ms 50.785 ms 35.957 ms 12 as19994.xe-1-0-7.ar1.ord6.us.nlayer.net (69.31.110.242) 34.723 ms 31.118 ms 29.967 ms 13 coreb.ord1.rackspace.net (184.106.126.138) 30.471 ms corea.ord1.rackspace.net (184.106.126.136) 33.392 ms 35.210 ms 14 core1-coreb.ord1.rackspace.net (184.106.126.129) 32.453 ms core1-corea.ord1.rackspace.net (184.106.126.125) 32.020 ms core1-coreb.ord1.rackspace.net (184.106.126.129) 32.417 ms 15 core1-aggr401a-3.ord1.rackspace.net (173.203.0.157) 31.274 ms 34.854 ms 30.194 ms

  Read the article

• Strange traceroute to msdn.microsoft.com

  - by Jasper

  The problem is I could not view any msdn.microsoft.com/* site and the main site itself on my Ubuntu box on Google Chrome browser. Error is: Error 101 (net::ERR_CONNECTION_RESET): The connection was reset. When I run traceout I get different result: Here is simple one: traceroute msdn.microsoft.com traceroute to msdn.microsoft.com (65.55.11.235), 30 hops max, 60 byte packets 1 10.0.0.138 (10.0.0.138) 0.121 ms 0.131 ms 0.128 ms 2 192.168.0.1 (192.168.0.1) 1.730 ms 1.724 ms 2.024 ms 3 bzq-179-37-1.static.bezeqint.net (212.179.37.1) 18.314 ms 19.277 ms 20.694 ms 4 bzq-218-227-250.red.bezeqint.net (81.218.227.250) 22.806 ms 23.651 ms 24.820 ms 5 bzq-179-75-198.static.bezeqint.net (212.179.75.198) 26.650 ms 27.533 ms 28.791 ms 6 * * * 7 bzq-179-124-122.static.bezeqint.net (212.179.124.122) 76.032 ms 72.968 ms 74.660 ms 8 igblmdistc7504.uk.msft.net (195.66.224.140) 75.708 ms 76.797 ms 78.257 ms 9 ge-5-1-0-0.lts-64cb-1a.ntwk.msn.net (207.46.42.227) 80.125 ms 81.336 ms 82.671 ms 10 ge-7-0-0-0.nyc-64cb-1a.ntwk.msn.net (207.46.47.20) 179.232 ms so-7-1-0-0.ash-64cb-1b.ntwk.msn.net (213.199.144.158) 162.508 ms 163.223 ms 11 xe-0-0-1-0.co1-96c-1b.ntwk.msn.net (207.46.45.29) 227.964 ms ge-7-0-0-0.co1-64c-1b.ntwk.msn.net (207.46.40.90) 228.226 ms xe-0-0-1-0.co1-96c-1b.ntwk.msn.net (207.46.45.29) 212.781 ms 12 10.22.8.54 (10.22.8.54) 215.046 ms xe-5-2-0-0.co1-96c-1a.ntwk.msn.net (207.46.40.167) 214.825 ms 10.22.8.58 (10.22.8.58) 213.251 ms 13 10.22.8.62 (10.22.8.62) 212.745 ms 213.827 ms 10.22.8.50 (10.22.8.50) 215.655 ms 14 10.22.8.62 (10.22.8.62) 211.665 ms !X 10.22.8.50 (10.22.8.50) 214.491 ms !X 10.22.8.54 (10.22.8.54) 218.471 ms !X Line 1,2 : It's me Line from 3-7: It's my Internet provider Line 8 and on: I think I hit MS servers WTF line 12-14 ????? 10.22.8.x ???? then I run this traceroute: sudo traceroute -T msdn.microsoft.com traceroute to msdn.microsoft.com (65.55.11.235), 30 hops max, 60 byte packets 1 10.0.0.138 (10.0.0.138) 0.109 ms 0.127 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 65.55.11.235 (65.55.11.235) 16.019 ms 17.364 ms So I hit MSDN web site already at 6 hop ! WTF ??? This is host -a msdn.microsoft.com from me: host -a msdn.microsoft.com Trying "msdn.microsoft.com" ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 19522 ;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;msdn.microsoft.com. IN ANY ;; ANSWER SECTION: msdn.microsoft.com. 3274 IN CNAME msdn.microsoft.akadns.net. msdn.microsoft.akadns.net. 600 IN A 65.55.11.235 Received 91 bytes from 127.0.0.1#53 in 108 ms Could someone help me understand and fix it ??

  Read the article

• Oracle Unicode problem when using NLS_CHARACTERSET is WE8ISO8859P1 and NLS_NCHAR_CHARACTERSET is AL16UTF16, and ColdFusion as programming language

  - by tsurahman

  I have 2 Oracle 10g database, XE and Enterprise XE Enterprise and this are the data type I've use in the test table and then I tried to test to insert some Unicode char from http://www.sustainablegis.com/unicode/ and the results are XE Enterprise for this test, I use ColdFusion 9 developer edition <cfprocessingDirective pageencoding="utf-8"> <cfset setEncoding("form","utf-8")> <form action="" method="post"> Unicode : <br> <textarea name="txaUnicode" id="txaUnicode" cols="50" rows="10"></textarea> <br><br> Language : <br> <input type="Text" name="txtLanguage" id="txtLanguage"> <br><br> <input type="Submit"> </form> <cfset dsn = "theDSN"> <cfif StructKeyExists(FORM, "FIELDNAMES")> <cfquery name="qryInsert" datasource="#dsn#"> INSERT INTO UNICODE ( C_VARCHAR2, C_CHAR, C_CLOB, C_NVARCHAR2, LANGUAGE ) VALUES ( <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#FORM.TXAUNICODE#">, <cfqueryparam cfsqltype="CF_SQL_CHAR" value="#FORM.TXAUNICODE#">, <cfqueryparam cfsqltype="CF_SQL_LONGVARCHAR" value="#FORM.TXAUNICODE#">, <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#FORM.TXAUNICODE#">, <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#FORM.TXTLANGUAGE#"> ) </cfquery> </cfif> <cfquery name="qryUnicode" datasource="#dsn#"> SELECT * FROM UNICODE ORDER BY LANGUAGE </cfquery> <table border="1"> <thead> <tr> <th>LANGUAGE</th> <th>C_VARCHAR2</th> <th>C_CHAR</th> <th>C_CLOB</th> <th>C_NVARCHAR2</th> </tr> </thead> <tbody> <cfoutput query="qryUnicode"> <tr> <td>#qryUnicode.LANGUAGE#</td> <td>#qryUnicode.C_VARCHAR2#</td> <td>#qryUnicode.C_CHAR#</td> <td>#qryUnicode.C_CLOB#</td> <td>#qryUnicode.C_NVARCHAR2#</td> </tr> </cfoutput> </tbody> </table> from this guide http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10749/ch6unicode.htm#i1007297 I think for my Enterprise database it should produce same thing as XE (at least for NVARCHAR2 column) since the typical solution from that guide said: Use NCHAR and NVARCHAR2 datatypes to store Unicode characters Keep WE8ISO8859P1 as the database character set Use AL16UTF16 as the national character set So, how to make it works too in my Enterprise database? Thank you :)

  Read the article

• Large ResultSet on postgresql query

  - by tuler

  I'm running a query against a table in a postgresql database. The database is on a remote machine. The table has around 30 sub-tables using postgresql partitioning capability. The query will return a large result set, something around 1.8 million rows. In my code I use spring jdbc support, method JdbcTemplate.query, but my RowCallbackHandler is not being called. My best guess is that the postgresql jdbc driver (I use version 8.3-603.jdbc4) is accumulating the result in memory before calling my code. I thought the fetchSize configuration could control this, but I tried it and nothing changes. I did this as postgresql manual recomended. This query worked fine when I used Oracle XE. But I'm trying to migrate to postgresql because of the partitioning feature, which is not available in Oracle XE. My environment: Postgresql 8.3 Windows Server 2008 Enterprise 64-bit JRE 1.6 64-bit Spring 2.5.6 Postgresql JDBC Driver 8.3-603

  Read the article

• How to iterate through an XDocument's Nodes

  - by Ed R

  I am trying to iterate through my xml document's nodes to get the value for <username>Ed</username> in each node. I am using Linq to sort the XDocument first, then attempting to loop through the nodes. I can't seem to find the correct foreach loop to achieve this. Any help is appreciated. var doc = XDocument.Load("files\\config.xml"); var newDoc = new XDocument(new XElement("Config", from p in doc.Element("Config").Elements("Profile") orderby int.Parse(p.Element("order").Value) select p)); foreach (XElement xe in newDoc.Nodes()) { MessageBox.Show(xe.Element("username").Value); }

  Read the article

• How to access Oracle system tables from inside of a PL/SQL function or procedure?

  - by mjumbewu

  I am trying to access information from an Oracle meta-data table from within a function. For example (purposefully simplified): CREATE OR REPLACE PROCEDURE MyProcedure IS users_datafile_path VARCHAR2(100); BEGIN SELECT file_name INTO users_datafile_path FROM dba_data_files WHERE tablespace_name='USERS' AND rownum=1; END MyProcedure; / When I try to execute this command in an sqlplus process, I get the following errors: LINE/COL ERROR -------- ----------------------------------------------------------------- 5/5 PL/SQL: SQL Statement ignored 6/12 PL/SQL: ORA-00942: table or view does not exist I know the user has access to the table, because when I execute the following command from the same sqlplus process, it displays the expected information: SELECT file_name FROM dba_data_files WHERE tablespace_name='USERS' AND rownum=1; Which results in: FILE_NAME -------------------------------------------------------------------------------- /usr/lib/oracle/xe/oradata/XE/users.dbf Is there something I need to do differently?

  Read the article

• xen debian: domU can't get out side

  - by iftol

  hi every body. i'm a trainee as a sysAdmin, it is my first expérience with virtualization. i have a server setup debian xen 3 with 2 physical interfaces. eth 0 for local network 10.0.0.1 and eth1 for internet (194.X.X.4). i created 3 VMs (web server, mail server and dabase server) with local ip addresses 172.10.0.x/24. the problem i had first is that domU can't ping dom0. i asked the sysAdmin of our ISP and he sais that he fogot to setup the bridginb. so he ceated a bridge with 172.10.0.1/24 after that i was able to ping the real server (194.X.X.4). but i can't go out side from my VMs, how can i fixe this issue? real or physical server ifconfig eth0 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe inet adr:10.1.3.12 Bcast:10.1.3.255 Masque:255.255.255.0 adr inet6: fe80::226:b9ff:fe84:ceb4/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:412006 errors:0 dropped:0 overruns:0 frame:0 TX packets:411296 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:31410957 (29.9 MiB) TX bytes:31178370 (29.7 MiB) Interruption:36 Mémoire:d6000000-d6012100 eth1 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe inet adr:194.x.x.4 Bcast:194.254.167.255 Masque:255.255.255.0 adr inet6: fe80::226:b9ff:fe84:ceb6/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:25872332 errors:0 dropped:0 overruns:0 frame:0 TX packets:414578 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:2642278343 (2.4 GiB) TX bytes:35436775 (33.7 MiB) lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1308073 errors:0 dropped:0 overruns:0 frame:0 TX packets:1308073 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:109871395 (104.7 MiB) TX bytes:109871395 (104.7 MiB) peth1 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:31818694 errors:0 dropped:0 overruns:0 frame:0 TX packets:414818 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:5197318822 (4.8 GiB) TX bytes:37904897 (36.1 MiB) Interruption:48 Mémoire:d8000000-d8012100 vif281.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:207 errors:0 dropped:0 overruns:0 frame:0 TX packets:298 errors:0 dropped:2 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:24629 (24.0 KiB) TX bytes:28404 (27.7 KiB) vif281.1 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:45 errors:0 dropped:47063 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:0 (0.0 B) TX bytes:4449 (4.3 KiB) vif282.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:78 errors:0 dropped:0 overruns:0 frame:0 TX packets:13 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:5041 (4.9 KiB) TX bytes:714 (714.0 B) xenbr0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet adr:172.10.0.1 Bcast:172.10.0.255 Masque:255.255.255.0 adr inet6: fe80::5c72:c6ff:fe49:7fe/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7180 errors:0 dropped:0 overruns:0 frame:0 TX packets:8615 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:756804 (739.0 KiB) TX bytes:791206 (772.6 KiB) brtcl show bridge name bridge id STP enabled interfaces eth1 8000.0026b984ceb6 no peth1 vif281.1 xenbr0 8000.feffffffffff no vif281.0 vif282.0 network-multi-bridge /etc/xen/scripts/network-virtual start vifnum="0" bridgeip="172.10.0.1/24" brnet="172.10.0.0/24" VM webserver eth0 Link encap:Ethernet HWaddr 00:16:3E:42:33:70 inet addr:172.10.0.2 Bcast:172.10.0.255 Mask:255.255.255.0 inet6 addr: fe80::216:3eff:fe42:3370/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:27 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:126 (126.0 b) TX bytes:2036 (1.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Thank you for your help.

  Read the article

• What’s New in Delphi XE6 Regular Expressions

  - by Jan Goyvaerts

  There’s not much new in the regular expression support in Delphi XE6. The big change that should be made, upgrading to PCRE 8.30 or later and switching to the pcre16 functions that use UTF-16, still hasn’t been made. XE6 still uses PCRE 7.9 and thus continues to require conversion from the UTF-16 strings that Delphi uses natively to the UTF-8 strings that older versions of PCRE require. Delphi XE6 does fix one important issue that has plagued TRegEx since it was introduced in Delphi XE. Previously, TRegEx could not find zero-length matches. So a regex like (?m)^ that should find a zero-length match at the start of each line would not find any matches at all with TRegEx. The reason for this is that TRegEx uses TPerlRegEx to do the heavy lifting. TPerlRegEx sets its State property to [preNotEmpty] in its constructor, which tells it to skip zero-length matches. This is not a problem with TPerlRegEx because users of this class can change the State property. But TRegEx does not provide a way to change this property. So in Delphi XE5 and prior, TRegEx cannot find zero-length matches. In Delphi XE6 TPerlRegEx’s constructor was changed to initialize State to the empty set. This means TRegEx is now able to find zero-length matches. TRegex.Replace() using the regex (?m)^ now inserts the replacement at the start of each line, as you would expect. If you use TPerlRegEx directly, you’ll need to set State to [preNotEmpty] in your own code if you relied on its behavior to skip zero-length matches. You will need to check existing applications that use TRegEx for regular expressions that incorrectly allow zero-length matches. In XE5 and prior, TRegEx using \d* would match all numbers in a string. In XE6, the same regex still matches all numbers, but also finds a zero-length match at each position in the string. RegexBuddy 4 warns about zero-length matches on the Create panel if you set it to Detailed mode. At the bottom of the regex tree there will be a node saying either “your regular expression may find zero-length matches” or “zero-length matches will be skipped” depending on whether your application allows zero-length matches (XE6 TRegEx) or not (XE–XE5 TRegEx).

  Read the article

• An Update on JD Edwards EnterpriseOne Products

  Gary Grieshaber, Director of Product Strategy for EnterpriseOne, speaks with Cliff about the new Lifetime Support Option that was announced at OOW, the future of EnterpriseOne and what he recommends customers who are running EnterpriseOne Xe or 8 releases do today. Gary also chats with Cliff about the highlights of the 8.95 release and what the certification for the Oracle Fusion middleware means to the customers using EnterpriseOne Tools.

  Read the article

• starting oracle database automatically.

  - by Searock

  I am using Fedora 8 and Oracle 10g Express Edition. Every time I start my fedora I have to click on start database. How can I add startdb.sh to startup so that it automatically executes when Fedora starts? I have tried adding the path to /etc/rc.d/rc.local but it still doesn't work. ./usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/startdb.sh I have even tried to add this script in /etc/init.d/oracle #!/bin/bash # # Run-level Startup script for the Oracle Instance and Listener # # chkconfig: 345 91 19 # description: Startup/Shutdown Oracle listener and instance ORA_HOME="/u01/app/oracle/product/9.2.0.1.0" ORA_OWNR="oracle" # if the executables do not exist -- display error if [ ! -f $ORA_HOME/bin/dbstart -o ! -d $ORA_HOME ] then echo "Oracle startup: cannot start" exit 1 fi # depending on parameter -- startup, shutdown, restart # of the instance and listener or usage display case "$1" in start) # Oracle listener and instance startup echo -n "Starting Oracle: " su - $ORA_OWNR -c "$ORA_HOME/bin/lsnrctl start" su - $ORA_OWNR -c $ORA_HOME/bin/dbstart touch /var/lock/subsys/oracle echo "OK" ;; stop) # Oracle listener and instance shutdown echo -n "Shutdown Oracle: " su - $ORA_OWNR -c "$ORA_HOME/bin/lsnrctl stop" su - $ORA_OWNR -c $ORA_HOME/bin/dbshut rm -f /var/lock/subsys/oracle echo "OK" ;; reload|restart) $0 stop $0 start ;; *) echo "Usage: $0 start|stop|restart|reload" exit 1 esac exit 0 and even this doesn't work. startdb.sh is located at /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/startdb.sh Thanks.

  Read the article

• Deploying Oracle ADF Essentials Applications to Glassfish

  - by Shay Shmeltzer

  With the new Oracle ADF Essentials offering you can now deploy applications that leverage Oracle ADF on the open source Glassfish 3.1 server. Deployment is documented in the official JDeveloper and ADF documentation (here) but below is a summary of the steps and a video of the steps you'll need to take to get a basic Oracle ADF Essentials application to work on GlassFish. Note - to make starting/stopping GlassFish easier for my demo I used my GlassFish extension that you can get here. First we'll install some ADF Runtime libraries on GlassFish Download and install Glassfish (Note - if you also have an Oracle DB on the same machine, you'll want to switch GlassFish's HTTP port to something else instead of 8080). Download the Oracle ADF Essentials packaging - this will get you an adf_essentials.zip file. Copy the adf_essentials.zip to the lib directory of your Glassfish domain - on a default windows install this would be: C:\glassfish3\glassfish\domains\domain1\lib Go the the above lib directory and issue a unzip -j adf_essentials.zip This will extract the ADF libraries to the directory. Now you can start the Glassfish server. Now let's configure Glassfish to handle applications of the ADF type: Invoke the admin console of glassfish (http://localhost:4848) and log into your admin account. Go to Configurations->Server-config->JVM Settings and choose the JVM Options tab Add the following entries: -XX:MaxPermSize=512m (note this entry should already exist so just make sure it has a big enough value) -Doracle.mds.cache=simple While we are in the admin console, we can also define JDBC connections that will be used by our application. Go into Resources->JDBC->JDBC Connection Pools and click to create a New one Give it a name and choose the resource type to be javax.sql.XADataSource and choose Oracle as the Database Driver vendor. Click Next Scroll down to the Additional Properties section and start filling in the information for your database. The values for an Oracle XE will be (user=hr, databaseName = XE, Password=hr, ServerName=localhost, DriverType=thin, PortNumber=1521) Click Finish Click Ping to check your connection works. Now define a new JDBC Resource that will use the pool you just defined. In my example I called the resource jdbc/HRDS You will need this name to match the name in your Application Module connection configuraiton.Now you can re-start the Glassfish server for the changes to take effect. Get an ADF application going (you can use the regular Fusion Application template for this) Go into the project properties of your viewController project, under the deployment section click to edit the deployment profile that is defined there. Go to Platform and choose Glassfish 3.1 from the drop down list. Click ok to go back to your project. Go to Application -> Application Properties-> Deployment Go to Platform and choose Glassfish 3.1 from the drop down list. Click ok to go back to your project. This step will make sure that JDeveloper will autoamtically add the necessary ADF libraries to the EAR file that is being generated for deployment on Glassfish  Go to your Application->Deploy and deploy either to an EAR file or directly to a Glassfish server connection that you created. Things should just work, but if they don't then look up the server.log in the log directory and check out what error is in there. Here is a video demo of the various steps: Note - right now the deployment of an ADF application takes about 2 minutes on my machine we are hoping to be able to improve this timing in the future. People who are more familiar with Glassfish might want to explore using exploded directory deployment and see if they can get it to work.

  Read the article

• E2251 Ambiguous overloaded call to ....

  - by Eric M

  I inherited some Delphi components/code that currently compiles with C++ Builder 2007. I'm simply now trying to compile the components with C++ Builder RAD XE. I don't know Delphi (object pascal). Here are the versions of the 'Supports' functions that appear to be in conflict. Is there a compiler switch I can use to make RAD XE backward compatible? Or is there something I can do to these function calls to correct the ambiguous nature? {$IFNDEF DELPHI5} procedure FreeAndNil(var Obj); var Temp: TObject; begin Temp := TObject(Obj); Pointer(Obj) := nil; Temp.Free; end; function Supports(const Instance: IUnknown; const Intf: TGUID; out Inst): Boolean; overload; begin Result := (Instance <> nil) and (Instance.QueryInterface(Intf, Inst) = 0); end; function Supports(Instance: TObject; const Intf: TGUID; out Inst): Boolean; overload; var Unk: IUnknown; begin Result := (Instance <> nil) and Instance.GetInterface(IUnknown, Unk) and Supports(Unk, Intf, Inst); end; {$ENDIF} {$IFNDEF DELPHI6} function Supports(const Instance: TObject; const IID: TGUID): Boolean; var Temp: IUnknown; begin Result := Supports(Instance, IID, Temp); end; {$ENDIF}

  Read the article

• Crosstab/Cube/Pivot Components for Delphi

  - by Anagoge

  I'm looking for a Delphi VCL crosstab/cube/pivotcube/olap grid component for Delphi 2009, 2010, or XE. I'm willing to sacrifice advanced features to get something open/free (or very cheap if I must) to make it easier to collaborate with any future developers without anyone having to purchase more components than I already use, since this will just be used in one screen. If there isn't anything appropriate out there, I may try to implement something simple on my own. I can live with some fairly basic features: drag and drop to configure dimensions, sort by a column, allow totals/min/max for a column, and (optionally) expand/collapse or drill down to sub-categories. Blazing performance and enterprise scalability are not required, since there should be less than 2000 source rows. There appear to be several decent options in the commercial space (ExpressPivotCube, FastCube, HierCube), but they are all a few hundred dollars. This project already uses existing installations of Excel 2007 and SQL Server 2005/2008, so I might consider leveraging those, though I'd prefer a native Delphi component, if possible. There are also the very old Decision Cube components included in Delphi's Source\xtab directory, but they apparently no longer support unicode compilers (Delphi 2009+), since I got dozens of unicode-related compilation errors while test compiling that source in Delphi XE. Those components also still link to the long-deprecated BDE! Has anyone modified Decision Cube to support unicode/pure-TDataSet? The online tutorials I found were incomplete and silent on the dozens of BDE/unicode compilation errors I see, so I might have to tackle that on my own. Does anyone have suggestions where to start for a free/cheap basic crosstab/pivot grid component?

  Read the article

• Pros/cons of reading connection string from physical file vs Application object (ASP.NET)?

  - by HaterTot

  my ASP.NET application reads an xml file to determine which environment it's currently in (e.g. local, development, production). It checks this file every single time it opens a connection to the database, in order to know which connection string to grab from the Application Settings. I'm entering a phase of development where efficiency is becoming a concern. I don't think it's a good idea to have to read a file on a physical disk ever single time I wish to access the database (very often). I was considering storing the connection string in Application["ConnectionString"]. So the code would be public static string GetConnectionString { if (Application["ConnectionString"] == null) { XmlDocument doc = new XmlDocument(); doc.Load(HttpContext.Current.Request.PhysicalApplicationPath + "bin/ServerEnvironment.xml"); XmlElement xe = (XmlElement) xnl[0]; switch (xe.InnerText.ToString().ToLower()) { case "local": connString = Settings.Default.ConnectionStringLocal; break; case "development": connString = Settings.Default.ConnectionStringDevelopment; break; case "production": connString = Settings.Default.ConnectionStringProduction; break; default: throw new Exception("no connection string defined"); } Application["ConnectionString"] = connString; } return Application["ConnectionString"].ToString(); } I didn't design the application so I figure there must have been a reason for reading the xml file every time (to change settings while the application runs?) I have very little concept of the inner workings here. What are the pros and cons? Do you think I'd see a small performance gain by implementing the function above? THANKS

  Read the article

• uninitialized local variable

  - by blitzeus

  This code compiles and runs though gives a Microsoft compiler error that I cant fix warning C4700: uninitialized local variable 'ptr4D' used. This is in the last line of the code, I think #include <iostream> using namespace std; const int DIM0 = 2, DIM1 = 3, DIM2 = 4, DIM3 = 5; void TestDeclar(); int main(){ TestDeclar(); cout << "Done!\n"; return 0; } void TestDeclar(){ //24 - array of 5 floats float xa[DIM3], xb[DIM3], xc[DIM3], xd[DIM3], xe[DIM3], xf[DIM3]; float xg[DIM3], xh[DIM3], xi[DIM3], xj[DIM3], xk[DIM3], xl[DIM3]; float xm[DIM3], xn[DIM3], xo[DIM3], xp[DIM3], xq[DIM3], xr[DIM3]; float xs[DIM3], xt[DIM3], xu[DIM3], xv[DIM3], xw[DIM3], xx[DIM3]; //6 - array of 4 pointers to floats float *ya[DIM2] = {xa, xb, xc, xd}, *yb[DIM2] = {xe, xf, xg, xh}; float *yc[DIM2] = {xi, xj, xk, xl}, *yd[DIM2] = {xm, xn, xo, xp}; float *ye[DIM2] = {xq, xr, xs, xt}, *yf[DIM2] = {xu, xv, xw, xx}; //2 - array of 3 pointers to pointers of floats float **za[DIM1] = {ya, yb, yc}; float **zb[DIM1] = {yd, ye, yf}; //array of 2 pointers to pointers to pointers of floats float ***ptr4D[DIM0] = {za, zb}; cout << &***ptr4D[DIM0] << '\n'; }

  Read the article

• How can I run supervisord without using root?

  - by Jason Baker

  I seem to be having trouble figuring out why supervisord won't run as a non-root user. If I start it with the user set to jason (pid 1000), I get the following in the log file: 2010-05-24 08:53:32,143 CRIT Set uid to user 1000 2010-05-24 08:53:32,143 WARN Included extra file "/home/jason/src/tsched/celeryd.conf" during parsing 2010-05-24 08:53:32,189 INFO RPC interface 'supervisor' initialized 2010-05-24 08:53:32,189 WARN cElementTree not installed, using slower XML parser for XML-RPC 2010-05-24 08:53:32,189 CRIT Server 'unix_http_server' running without any HTTP authentication checking 2010-05-24 08:53:32,190 INFO daemonizing the supervisord process 2010-05-24 08:53:32,191 INFO supervisord started with pid 3444 ...then the process dies for some unknown reason. If I start it without sudo (under the user jason), I get similar output: 2010-05-24 08:51:32,859 INFO supervisord started with pid 3306 2010-05-24 08:52:15,761 CRIT Can't drop privilege as nonroot user 2010-05-24 08:52:15,761 WARN Included extra file "/home/jason/src/tsched/celeryd.conf" during parsing 2010-05-24 08:52:15,807 INFO RPC interface 'supervisor' initialized 2010-05-24 08:52:15,807 WARN cElementTree not installed, using slower XML parser for XML-RPC 2010-05-24 08:52:15,807 CRIT Server 'unix_http_server' running without any HTTP authentication checking 2010-05-24 08:52:15,808 INFO daemonizing the supervisord process 2010-05-24 08:52:15,809 INFO supervisord started with pid 3397 ...and it still doesn't run. If it's any help, here's the supervisord.conf file I'm using: [unix_http_server] file=/tmp/supervisor.sock ; path to your socket file [supervisord] logfile=./supervisord.log ; supervisord log file logfile_maxbytes=50MB ; maximum size of logfile before rotation logfile_backups=10 ; number of backed up logfiles loglevel=debug ; info, debug, warn, trace pidfile=./supervisord.pid ; pidfile location nodaemon=false ; run supervisord as a daemon minfds=1024 ; number of startup file descriptors minprocs=200 ; number of process descriptors user=jason ; default user childlogdir=./supervisord/ ; where child log files will live [rpcinterface:supervisor] supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface [supervisorctl] serverurl=unix:///tmp/supervisor.sock ; use unix:// schem for a unix sockets. [include] # Uncomment this line for celeryd for Python files=celeryd.conf # Uncomment this line for celeryd for Django. ;files=django/celeryd.conf ...and here's celeryd.conf: [program:celery] command=bin/celeryd --loglevel=INFO --logfile=./celeryd.log environment=PYTHONPATH='./tsched_worker', JIVA_DB_PLATFORM='oracle', ORACLE_HOME='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server', LD_LIBRARY_PATH='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib', TNS_ADMIN='/home/jason', CELERY_CONFIG_MODULE='tsched_worker.celeryconfig' directory=. user=jason numprocs=1 stdout_logfile=/var/log/celeryd.log stderr_logfile=/var/log/celeryd.log autostart=true autorestart=true startsecs=10 ; Need to wait for currently executing tasks to finish at shutdown. ; Increase this if you have very long running tasks. stopwaitsecs = 600 ; if rabbitmq is supervised, set its priority higher ; so it starts first priority=998 Can anyone help me figure out what's going on?

  Read the article

• How do I configure a guest VM's static IP address automatically in Citrix XenServer?

  - by Kev

  To facilitate automation of guest VM provisioning, how do I set (in a script) the IP address on a guest VM's NIC (or NIC's) once a new VM has booted? Is there a way to "inject" netsh commands via the Citrix guest OS tools (for Windows for example) once the host has started? Or can this be done via the Citrix API/SDK or the xe tools? These are windows 2008 servers that have been sysprep'd so when the boot for the first time they have no IP address.

  Read the article

• Upgrading Fusion Middleware 11.1.1.x to 11.1.1.4

  - by James Taylor

  This is a follow on from my previous post where we upgraded 11.1.1.2 to 11.1.1.3. The instructions I provide here will work for Fusion Middleware 11.1.1.2 and 11.1.1.3 wanting to upgrade to 11.1.1.4. In this example I’m just upgrading SOA Suite on OEL 64bit but the steps will be the same, some of the downloads may be different based on your environment. To upgrade to 11.1.1.4 you need to have access to http://support.oracle.com as this is where the downloads reside. Oracle provides 11.1.1.4 as a standalone download so you can do a fresh install if required using OTN downloads (http://www.oracle.com/technetwork/indexes/downloads/index.html). The high level steps to upgrade are as follows: Download software Shutdown you SOA Environment Upgrade WLS to 11.1.1.4 Upgrade SOA Suite to 11.1.1.4 Upgrade OSB to 11.1.1.4 Upgrade MSD Schemas Identify the downloads you require for your install. You will need the WebLogic Server Upgrade and the additional product downloads. If you are using 64bit then use the generic version. The downloads are found from the following location - http://download.oracle.com/docs/html/E18749_01/download_readme.htm#BABDDIIC For the purpose of this post I downloaded the following patches 11060985 – WLS Server Generic 11060960 – SOA Suite 11061005 – OSB Suite You must also download the 11.1.1.4 RCU tool to upgrade the DB schemas. It is available via OTN, or, Oracle Support, I have provided the link from Oracle Support.  11060956 – RCU Make sure you have set the Java executable in your PATH e.g. export PATH=$JAVA_HOME/bin:$PATH  Make sure all your WebLogic environment has been shut down before performing the upgrade. Extract the WLS patch 11060985 to a temporary directory and start the installer java –jar wls1034_upgrade_generic.jar Please note if you are not running 64BIT then the upgrade executable will be just a bin file which you can execute directly. Chose the right Oracle home for your WebLogic Server install. In the Register for Security Updates you can enter your details or just click Next. If you do not enter details confirm that you don’t want to receive these updates Select the products you want to upgrade and select next. It is recommended that you accept the defaults. Confirm the directories that will be upgraded Upgrade of WLS ahs been completed   Extract your both SOA downloads to a temporary directory and run the installer found in Disk1 ./runInstaller -jreLoc /java/jdk1.6.0_20/jre Please note that the java location and version may be different for your environment Skip the Software Updates Ensure your system meets the prerequisites Set the Oracle home for your SOA install. You will be asked to confirm that you want to upgrade, click Yes Choose your application server. Since you are upgrading from 11.1.1.x you will be on WebLogic Start the Install Installation Upgrade of SOA Suite completed accept the default to finish.   In my environment I have OSB installed so I need to upgrade this next. If you don’t have SOA Suite you can go straight to completing the DB Schema updates at Step 24.  Extract the OSB upgrade files to a temporary directory and execute the installer found in the Disk1 folder. ./runInstaller -jreLoc /java/jdk1.6.0_20/jre Skip the software updates Select the Oracle home for your environment Accept the warning to continue the upgrade Point to the location of your WebLogic Server installation Install the OSB upgrade Upgrade has been completed accept the defaults Change directory to $MW_HOME/oracle_common/bin where the Patch Set Assistant is installed Execute the following command to update the MDS schema. Please not for my examples I have the context set to DEV. your may be different. This means that all my schemas are prefixed by DEV. ./psa -dbType Oracle -dbConnectString 'localhost:1521:xe' -dbaUserName sys -schemaUserName DEV_MDS You will be asked you passwords for sys and the schema Enter the database administrator password for "sys": Enter the schema password for schema user "DEV_MDS": Change directory to $MW_HOME/Oracle_SOA1/bin to where the Patch Set Assistant is installed for SOA Suite. Execute the following command to update the SOA and BAM schemas ./psa -dbType Oracle -dbConnectString 'localhost:1521:xe' -dbaUserName sys -schemaUserName DEV_SOAINFRA   To check that you have the installed correctly run the following SQL as sysdba. SELECT owner, version, status FROM schema_version_registry; OWNER                          VERSION                        STATUS ------------------------------ ------------------------------ ----------- DEV_MDS                        11.1.1.4.0                     VALID DEV_SOAINFRA                   11.1.1.4.0                     VALID Don’t stress if the versions are not all sitting at version 11.1.1.4 as not all schemas need to be updated. The key ones are MDS and SOAINFRA

  Read the article

• ld cannot find -limf -lsvml -lipgo -ldecimal -lirc

  - by Jaguaraci Silva

  I have installed the ICC recently, the XE composer 2013 version and I don't get success for running it because I have some errors to find libs that I don't know, however, I think that the artifact ia32-libs don't be found on the Ubuntu 12.04.1 can be the reason!. Thus, I got these dependencies: sudo apt-get install rpm build-essential sudo apt-get install libstdc++6 but these don't sudo apt-get install ia32-libs* or sudo apt-get install ia32-libs-multiarch I got this error always I'm trying compile on ICC: ld: cannot find -limf ld: cannot find -lsvml ld: cannot find -lipgo ld: cannot find -ldecimal ld: cannot find -lirc ld: cannot find -lsvml Thanks in advantage.

  Read the article

• Extended Events Code Generator v1.001 - A Quick Fix

  - by Adam Machanic

  If you're one of the estimated 3-5 people who've downloaded and are using my XE Code Generator , please note that version 1.000 has a small bug: text data (such as query text) larger than 8000 bytes is truncated. I've fixed this issue and am pleased to present version 1.001, attached to this post. Enjoy, and stay tuned for slightly more interesting enhancements! Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!...(read more)

  Read the article

• Problem installing Oracle 10g Express edition

  - by abhi

  I have installed Oracle 10g Express edition in Ubuntu 10.10 and it doesn't show or ask to give my password during installation. When I click on "start database" it gave the warning "Operation failed, abhi is not a member of 'dba' group." and when clink on "Run SQL command line" it shows /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/nls_lang.sh: 114: [[: not found When I click on "GOTO Database home page", it opens Mozilla's "Ubuntu Google search page". Can anyone help me get my Oracle to work or tell me how to remove that because it is also not getting removed. I tried all the commands that are given as suggestions by Ubuntu. Please help me because I don't want to format my Ubuntu.

  Read the article

< Previous Page | 1 2 3 4 5 6 7  | Next Page >