Search Results

Search found 954 results on 39 pages for 'xorg'.

Page 4/39 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • NVIDIA x server - "sudo nvidia config" does not generate a working 'xorg.config'

    - by Mike
    I am over 18 hours deep on this challenge. I got to this point and am stuck. very stuck. Maybe you can figure it out? Ubuntu Version 12.04 LTS with all the updates installed. Problem: The default settings in "etc/X11/xorg.conf" that are generated by the "nvidia-xconfig" tool, do not allow the NVIDIA x server to connect to the driver in my "System Settings Additional Driver window". (that's how I understand it. Lots of information below). Symptoms of Problem "System Settings Additional Driver" window has drivers, but the nvidia x server cannot connect/utilize any of the 4 drivers. the drivers are activated, but not in use. When I go to "System Tools Administration NVIDIA x server settings" I get an error that basically tells me to create a default file to initialize the NVIDIA X server (screen shot below). This is the messages the terminal gives after running a "sudo nvidia-xconfig" command for the first time. It seems that the generated file by the tool i just ran is generating a bad/unusable file: If I run the "sudo nvidia-xconfig" command again, I wont get an error the second time. However when I reboot, the default file that is generated (etc/X11/xorg.conf) simply puts the screen resolution at 800 x 600 (or something big like that). When I try to go to NVIDIA x server settings I am greeted with the same screen as the screen shot as in symptom 2 (no option to change the resolution). If I try to go to "system settings display" there are no other resolutions to choose from. At this point I must delete the newly minted "xorg.conf" and reinstate the original in its place. Here are the contents of the "xorg.conf" that is generated first (the one missing required information): # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Hardware: I ran the "lspci|grep VGA". There results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) More Hardware info: Ram: 16GB CPU: Intel Core i7-2720QM @2.2GHz * 8 Other: 64 bit. This is a triple boot computer and not a VM. Attempts With Not Success on My End: 1) Tried to append the "xorg.conf" with what I perceive is missing information and obviously it didn't fly. 2) All the other stuff I tried got me to this point. 3) See if this link is helpful to you (I barely get it, but i get enough knowing that a smarter person might find this useful): http://manpages.ubuntu.com/manpages/lucid/man1/nvidia-xconfig.1.html 4) I am completely new to Linux (40 hours over past week), but not to programming. However I am very serious about changing over to Linux. When you respond (I hope someone responds...) please respond in a way that a person new to Linux can understand. 5) By the way, the reason I am in this mess is because I MUST have a second monitor running from my laptop, and "System Settings Display" doesn't recognize my second display. I know it is possible to make the second display work in my system, because when I boot from the install CD, I perform work on the native laptop monitor, but the second monitor shows a purple screen with Ubuntu in the middle, so I know the VGA port is sending a signal out. If this is too much for you to tackle please suggest an alternative method to get a second display. I don't want to go to windows but I cannot have a single display. I am really fudged here. I hope some smart person can help. Thanks in advance. Mike. **********************EDIT #1********************** More Details About Graphics Card I was asked "which brand of nvidia-card do you have exactly?" Here is what I did to provide more info (maybe relevant, maybe not, but here is everything): 1) Took my Lenovo W520 right apart to see if there is an identifier on the actual card. However I realized that if I get deep enough to take a look, the laptop "won't like it". so I put it back together. Figuring out the card this way is not an option for me right now. 2) (My computer is triple boot) I logged into Win7 and ran 'dxdiag' command. here is the screen shot: 3) I tried to look on the lenovo website for more details... but no luck. I took a look at my receipts and here is info form receipt: System Unit: W520 NVIDIA Quadro 1000M 2GB 4) In win7 I went to the NVIDIA website and used the option to have my card 'scanned' by a Java applet to determine the latest update for my card. I tried the same with Ubuntu but I can't get the applet to run. Here is the recommended driver from from the NVIDIA Applet for my card for Win7 (I hope this shines some light on the specifics of the card): Quadro/NVS/Tesla/GRID Desktop Driver Release R319 Version: 320.00 WHQL Release Date: 3.5.2013 5) Also I went on the NVIDIA driver search and looked through every possible combination of product type + product series + product to find all the combinations that yield a 1000M card. My card is: Product Type: Quadro Product Series: Quadro Series (Notebooks) Product: 1000M ***********************EDIT #2******************* Additional Symptoms Another question that generated more symptoms I previously didn't mention was: "After generating xorg.conf by nvidia-xconfig, go to additional drivers, do you see nvidia-304?" 1) I took a screen shot of the "additional drivers" right after generating xorg.conf by nvidia-xconfig. Here it is: 2) Then I did a reboot. Now Ubuntu is 600 x 800 resolution. When I logged in after the computer came up I got an error (which I always get after generating xorg.conf by nvidia-xconfig and rebooting) 3) To finally answer the question - No. There is no "NVIDIA-304" driver. Screen shot of additional drivers after generating xorg.conf by nvidia-xconfig and rebooting : At this point I revert to the original xorg.conf and delete the xorg.conf generated by Nvidia.

    Read the article

  • Install lubuntu 12.04 on an old Dell c600 : Video issues

    - by maniat1k
    I am trying to install lubuntu on an old laptop. I use the 386 alternate instalation of it, because it has only 256mb ... All when ok so when I start up the lubuntu the screen splits between 1024x768 and 800x600... its very horrible to use =). Ok I do this: lspci and found an ATI Rage mobility M3. 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02) So I tryied the old xorg way to edit the missing resolution, but it does not work:... Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Rage Mobility M3 (AGP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection on an brand new xorg.conf... Do an init 6 to see if X take the changes, but nothing habbened: also tryed to do pkg-reconfigure -changedir /etc/X11 (where I created the new xorg.conf) and nothing.. removed the X conf from /tmp.. also do sudo apt-get update / upgrade... and no luck... UPDATE Updated to 12.04. This an edited xorg fr old dells like mine: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg # xorg.conf for dell latitude c600 by A. Howlett and others Section "ServerLayout" Identifier "Default Server Layout" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "Generic Mouse" "AlwaysCore" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/artwiz-aleczapka" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/util" FontPath "/usr/local/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts/aquafont" FontPath "/usr/share/fonts/artwiz" FontPath "/usr/share/fonts/artwiz-aleczapka-en" FontPath "/usr/share/fonts/corefonts" FontPath "/usr/share/fonts/freefont" EndSection Section "Module" Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "pex5" Load "record" Load "xie" Load "v4l" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "CorePointer" Option "Device" "/dev/psaux" Option "Protocol" "PS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "SendCoreEvents" "true" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "laptop LCD" VendorName "Dell" ModelName "Latitude C600" HorizSync 31.5-48.5 VertRefresh 40-70 EndSection Section "Device" Identifier "Video0" Driver "r128" VideoRam 8192 Option "EnablePageFlip" "true" Option "AGPFastWrite" "true" Option "AGPMode" "2" BusID "PCI:01:00:0" Screen 0 Option "Display" "FP" Option "MonitorLayout" "CRT, LFP" EndSection Section "Screen" Identifier "Screen0" Device "Video0" Monitor "laptop LCD" DefaultDepth 16 Subsection "Display" Depth 32 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection

    Read the article

  • How to change metamode in xorg.conf so that my game in FHD will be displayed only in the external monitor?

    - by Patryk
    I would like to launch my game only in the external monitor which I have attached to my laptop with hdmi cable. This is my current xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 319.60 (buildmeister@swio-display-x64-rhel04-15) Wed Sep 25 15:17:31 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "metamodes" "1024x786,NULL;1280x720,NULL;NULL,1680x1050;NULL,1920x1080" SubSection "Display" Depth 24 EndSubSection EndSection Although with this config nothing changes (I have my game displayed in the laptop screen and exceeding a little bit onto the external monitor since I set it to be in 1920x1080) I have read this https://help.ubuntu.com/community/XineramaHowTo but with no luck of solving this issue. The only temporary solution for this problem now is to manually switch of the laptop display and then launch the game.

    Read the article

  • Crop display size in linux

    - by TomSW
    My laptop has a slightly damaged lcd - it has a black strip on the right that reduces the working resolution from 1400x1050 to about 1375x1050 - thus hiding part of the right edge of the desktop, windows, or the mouse pointer should it be unwise enough to stray there. Is there a way in linux to crop the monitor output so as to keep the screen inside the working area of the monitor? edit: this is the same question as Limit video output to a section of a display and leave the rest blank

    Read the article

  • Linux: Configure Xorg X11 Window System

    <b>nixCraft:</b> "My xorg.conf file is missing as I deleted accidentally for some reason. Now, Xorg try to probe my hardware on every startup. How do I configure Xorg under Debian or any Linux distro / operating systems?"

    Read the article

  • No GLX on Intel card with multiseat with additional nVidia card

    - by MeanEYE
    I have multiseat configured and my Xorg has 2 server layouts. One is for nVidia card and other is for Intel card. They both work, but display server assigned to Intel card doesn't have hardware acceleration since DRI and GLX module being used is from nVidia driver. So my question is, can I configure layouts somehow to use right DRI and GLX with each card? My Xorg.conf: Section "ServerLayout" Identifier "Default" Screen 0 "Screen0" 0 0 Option "Xinerama" "0" EndSection Section "ServerLayout" Identifier "TV" Screen 0 "Screen1" 0 0 Option "Xinerama" "0" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E198WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 610" EndSection Section "Device" Identifier "Device1" Driver "intel" BusID "PCI:0:2:0" Option "AccelMethod" "uxa" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-0: nvidia-auto-select +1440+0, DFP-1: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Log file for Intel: [ 18.239] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 18.239] X Protocol Version 11, Revision 0 [ 18.239] Build Operating System: Linux 2.6.24-32-xen x86_64 Ubuntu [ 18.239] Current Operating System: Linux bytewiper 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 [ 18.239] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=fc0616fd-f212-4846-9241-ba4a492f0513 ro quiet splash [ 18.239] Build Date: 20 September 2012 11:55:20AM [ 18.239] xorg-server 2:1.13.0+git20120920.70e57668-0ubuntu0ricotz (For technical support please see http://www.ubuntu.com/support) [ 18.239] Current version of pixman: 0.26.0 [ 18.239] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.239] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.239] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Nov 21 18:32:14 2012 [ 18.239] (==) Using config file: "/etc/X11/xorg.conf" [ 18.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.239] (++) ServerLayout "TV" [ 18.239] (**) |-->Screen "Screen1" (0) [ 18.239] (**) | |-->Monitor "Monitor1" [ 18.240] (**) | |-->Device "Device1" [ 18.240] (**) Option "Xinerama" "0" [ 18.240] (==) Automatically adding devices [ 18.240] (==) Automatically enabling devices [ 18.240] (==) Automatically adding GPU devices [ 18.240] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 18.240] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 18.240] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.240] (II) Loader magic: 0x7f6917944c40 [ 18.240] (II) Module ABI versions: [ 18.240] X.Org ANSI C Emulation: 0.4 [ 18.240] X.Org Video Driver: 13.0 [ 18.240] X.Org XInput driver : 18.0 [ 18.240] X.Org Server Extension : 7.0 [ 18.240] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.241] (--) PCI: (0:0:2:0) 8086:0152:1043:84ca rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64 [ 18.241] (--) PCI:*(0:1:0:0) 10de:104a:1458:3546 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 18.241] (II) Open ACPI successful (/var/run/acpid.socket) [ 18.241] Initializing built-in extension Generic Event Extension [ 18.241] Initializing built-in extension SHAPE [ 18.241] Initializing built-in extension MIT-SHM [ 18.241] Initializing built-in extension XInputExtension [ 18.241] Initializing built-in extension XTEST [ 18.241] Initializing built-in extension BIG-REQUESTS [ 18.241] Initializing built-in extension SYNC [ 18.241] Initializing built-in extension XKEYBOARD [ 18.241] Initializing built-in extension XC-MISC [ 18.241] Initializing built-in extension SECURITY [ 18.241] Initializing built-in extension XINERAMA [ 18.241] Initializing built-in extension XFIXES [ 18.241] Initializing built-in extension RENDER [ 18.241] Initializing built-in extension RANDR [ 18.241] Initializing built-in extension COMPOSITE [ 18.241] Initializing built-in extension DAMAGE [ 18.241] Initializing built-in extension MIT-SCREEN-SAVER [ 18.241] Initializing built-in extension DOUBLE-BUFFER [ 18.241] Initializing built-in extension RECORD [ 18.241] Initializing built-in extension DPMS [ 18.241] Initializing built-in extension X-Resource [ 18.241] Initializing built-in extension XVideo [ 18.241] Initializing built-in extension XVideo-MotionCompensation [ 18.241] Initializing built-in extension XFree86-VidModeExtension [ 18.241] Initializing built-in extension XFree86-DGA [ 18.241] Initializing built-in extension XFree86-DRI [ 18.241] Initializing built-in extension DRI2 [ 18.241] (II) LoadModule: "glx" [ 18.241] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 18.247] (II) Module glx: vendor="NVIDIA Corporation" [ 18.247] compiled for 4.0.2, module version = 1.0.0 [ 18.247] Module class: X.Org Server Extension [ 18.247] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012 [ 18.247] Loading extension GLX [ 18.247] (II) LoadModule: "intel" [ 18.248] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 18.248] (II) Module intel: vendor="X.Org Foundation" [ 18.248] compiled for 1.13.0, module version = 2.20.13 [ 18.248] Module class: X.Org Video Driver [ 18.248] ABI class: X.Org Video Driver, version 13.0 [ 18.248] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 18.248] (++) using VT number 8 [ 18.593] (II) intel(0): using device path '/dev/dri/card0' [ 18.593] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 18.593] (==) intel(0): RGB weight 888 [ 18.593] (==) intel(0): Default visual is TrueColor [ 18.593] (**) intel(0): Option "AccelMethod" "uxa" [ 18.593] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1) [ 18.593] (**) intel(0): Relaxed fencing enabled [ 18.593] (**) intel(0): Wait on SwapBuffers? enabled [ 18.593] (**) intel(0): Triple buffering? enabled [ 18.593] (**) intel(0): Framebuffer tiled [ 18.593] (**) intel(0): Pixmaps tiled [ 18.593] (**) intel(0): 3D buffers tiled [ 18.593] (**) intel(0): SwapBuffers wait enabled ... [ 20.312] (II) Module fb: vendor="X.Org Foundation" [ 20.312] compiled for 1.13.0, module version = 1.0.0 [ 20.312] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.312] (II) Loading sub module "dri2" [ 20.312] (II) LoadModule: "dri2" [ 20.312] (II) Module "dri2" already built-in [ 20.312] (==) Depth 24 pixmap format is 32 bpp [ 20.312] (II) intel(0): [DRI2] Setup complete [ 20.312] (II) intel(0): [DRI2] DRI driver: i965 [ 20.312] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 20.312] (II) UXA(0): Driver registered support for the following operations: [ 20.312] (II) solid [ 20.312] (II) copy [ 20.312] (II) composite (RENDER acceleration) [ 20.312] (II) put_image [ 20.312] (II) get_image [ 20.312] (==) intel(0): Backing store disabled [ 20.312] (==) intel(0): Silken mouse enabled [ 20.312] (II) intel(0): Initializing HW Cursor [ 20.312] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.313] (**) intel(0): DPMS enabled [ 20.313] (==) intel(0): Intel XvMC decoder enabled [ 20.313] (II) intel(0): Set up textured video [ 20.313] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 20.313] (II) intel(0): direct rendering: DRI2 Enabled [ 20.313] (==) intel(0): hotplug detection: "enabled" [ 20.332] (--) RandR disabled [ 20.335] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 20.335] (II) intel(0): Setting screen physical size to 508 x 285 [ 20.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.340] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.340] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.340] (II) LoadModule: "evdev" [ 20.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

    Read the article

  • I have 6 updates that won't install on Ubuntu 12.04?

    - by Taylor
    I'm an Ubuntu novice, so any help here is greatly appreciated! I'm running Ubuntu 12.04, and I have six updates that just won't install. I've tried Update Manger, sudo apt-get upgrade, and sudo apt-get update. Nothing has worked so far. Here are the details I get from Update Manager: installArchives() failed: Setting up linux-image-3.2.0-24-generic-pae (3.2.0-24.37) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-24-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-27-generic-pae (3.2.0-27.43) ... No apport report written because MaxReports is reached already Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-27-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 No apport report written because MaxReports is reached already Setting up linux-image-3.2.0-29-generic-pae (3.2.0-29.46) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-29-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 No apport report written because MaxReports is reached already Setting up udev (175-0ubuntu9.1) ... udev stop/waiting udev start/running, process 3685 /var/lib/dpkg/info/udev.postinst: 87: /var/lib/dpkg/info/udev.postinst: update-initramfs: not found dpkg: error processing udev (--configure): subprocess installed post-installation script returned error exit status 127 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of xserver-xorg-core: xserver-xorg-core depends on udev (= 149); however: Package udev is not configured yet. dpkg: error processing xserver-xorg-core (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of fglrx: fglrx depends on xserver-xorg-core; however: Package xserver-xorg-core is not configured yet. dpkg: error processing fglrx (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of linux-image-generic-pae: linux-image-generic-pae depends on linux-image-3.2.0-24-generic-pae; however: Package linux-image-3.2.0-24-generic-pae is not configured yet. dpkg: error processing linux-image-generic-pae (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of linux-generic-pae: linux-generic-pae depends on linux-image-generic-pae (= 3.2.0.24.26); however: Package linux-image-generic-pae is not configured yet. dpkg: error processing linux-generic-pae (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of xserver-xorg-video-intel: xserver-xorg-video-intel depends on xorg-video-abi-11; however: Package xorg-video-abi-11 is not installed. Package xserver-xorg-core which provides xorg-video-abi-11 is not configured yet. xserver-xorg-video-intel depends on xserver-xorg-core (= 2:1.10.99.901); however: Package xserver-xorg-core is not configured yet. dpkg: error processing xserver-xorg-video-intel (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev:No apport report written because MaxReports is reached already fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-24-generic-pae linux-image-3.2.0-27-generic-pae linux-image-3.2.0-29-generic-pae udev xserver-xorg-core fglrx fglrx-amdcccle linux-image-generic-pae linux-generic-pae xserver-xorg-video-intel fglrx-dev Error in function: Setting up linux-image-3.2.0-24-generic-pae (3.2.0-24.37) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-24-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-29-generic-pae (3.2.0-29.46) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-29-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-27-generic-pae (3.2.0-27.43) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-27-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up udev (175-0ubuntu9.1) ... udev stop/waiting udev start/running, process 3782 /var/lib/dpkg/info/udev.postinst: 87: /var/lib/dpkg/info/udev.postinst: update-initramfs: not found dpkg: error processing udev (--configure): subprocess installed post-installation script returned error exit status 127 dpkg: dependency problems prevent configuration of linux-image-generic-pae: linux-image-generic-pae depends on linux-image-3.2.0-24-generic-pae; however: Package linux-image-3.2.0-24-generic-pae is not configured yet. dpkg: error processing linux-image-generic-pae (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xserver-xorg-core: xserver-xorg-core depends on udev (= 149); however: Package udev is not configured yet. dpkg: error processing xserver-xorg-core (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx: fglrx depends on xserver-xorg-core; however: Package xserver-xorg-core is not configured yet. dpkg: error processing fglrx (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic-pae: linux-generic-pae depends on linux-image-generic-pae (= 3.2.0.24.26); however: Package linux-image-generic-pae is not configured yet. dpkg: error processing linux-generic-pae (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xserver-xorg-video-intel: xserver-xorg-video-intel depends on xorg-video-abi-11; however: Package xorg-video-abi-11 is not installed. Package xserver-xorg-core which provides xorg-video-abi-11 is not configured yet. xserver-xorg-video-intel depends on xserver-xorg-core (= 2:1.10.99.901); however: Package xserver-xorg-core is not configured yet. dpkg: error processing xserver-xorg-video-intel (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev: fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--configure): dependency problems - leaving unconfigured

    Read the article

  • xorg, nvidia, log-in all hosed - how can I completely reset graphics set-up/settings?

    - by Fred Hamilton
    I just did a fresh install of Mythbuntu 12.04.1 on my Intel MB with nVidia 9500GT graphics card. Hardware's been working great with 10.10 for about 2 years. Background: (optional - feel free to skip to question) I was trying to get my component video output to generate 720p, messing around with the nvidia drivers, and now the entire display system is hosed. I can SSH in and get a terminal. Depending on which nvidia package I install/remove, I get: Garbage on screen (after I "apt-get remove nvidia*") A low-res graphical log-in screen where I can log in as fred or guest. If I log in as fred, it displays some text mode status line then goes right back to the log-in screen. If I log in as guest, I actually get the full Ubuntu desktop, but I need to be able to log in as fred. Other times I get an error: "API mismatch: the NVIDIA kernel module has version 304.43, but this NVIDIA driver component has version 295.49." I've googled around, including trying this thread with the same error message, but to no effect. Question: How can I just reset x settings, drivers, everything display-related to the exact same way it was after a fresh install?

    Read the article

  • Solaris 11.1: Changes to included FOSS packages

    - by alanc
    Besides the documentation changes I mentioned last time, another place you can see Solaris 11.1 changes before upgrading is in the online package repository, now that the 11.1 packages have been published to http://pkg.oracle.com/solaris/release/, as the “0.175.1.0.0.24.2” branch. (Oracle Solaris Package Versioning explains what each field in that version string means.) When you’re ready to upgrade to the packages from either this repo, or the support repository, you’ll want to first read How to Update to Oracle Solaris 11.1 Using the Image Packaging System by Pete Dennis, as there are a couple issues you will need to be aware of to do that upgrade, several of which are due to changes in the Free and Open Source Software (FOSS) packages included with Solaris, as I’ll explain in a bit. Solaris 11 can update more readily than Solaris 10 In the Solaris 10 and older update models, the way the updates were built constrained what changes we could make in those releases. To change an existing SVR4 package in those releases, we created a Solaris Patch, which applied to a given version of the SVR4 package and replaced, added or deleted files in it. These patches were released via the support websites (originally SunSolve, now My Oracle Support) for applying to existing Solaris 10 installations, and were also merged into the install images for the next Solaris 10 update release. (This Solaris Patches blog post from Gerry Haskins dives deeper into that subject.) Some of the restrictions of this model were that package refactoring, changes to package dependencies, and even just changing the package version number, were difficult to do in this hybrid patch/OS update model. For instance, when Solaris 10 first shipped, it had the Xorg server from X11R6.8. Over the first couple years of update releases we were able to keep it up to date by replacing, adding, & removing files as necessary, taking it all the way up to Xorg server release 1.3 (new version numbering begun after the X11R7 split of the X11 tree into separate modules gave each module its own version). But if you run pkginfo on the SUNWxorg-server package, you’ll see it still displayed a version number of 6.8, confusing users as to which version was actually included. We stopped upgrading the Xorg server releases in Solaris 10 after 1.3, as later versions added new dependencies, such as HAL, D-Bus, and libpciaccess, which were very difficult to manage in this patching model. (We later got libpciaccess to work, but HAL & D-Bus would have been much harder due to the greater dependency tree underneath those.) Similarly, every time the GNOME team looked into upgrading Solaris 10 past GNOME 2.6, they found these constraints made it so difficult it wasn’t worthwhile, and eventually GNOME’s dependencies had changed enough it was completely infeasible. Fortunately, this worked out for both the X11 & GNOME teams, with our management making the business decision to concentrate on the “Nevada” branch for desktop users - first as Solaris Express Desktop Edition, and later as OpenSolaris, so we didn’t have to fight to try to make the package updates fit into these tight constraints. Meanwhile, the team designing the new packaging system for Solaris 11 was seeing us struggle with these problems, and making this much easier to manage for both the development teams and our users was one of their big goals for the IPS design they were working on. Now that we’ve reached the first update release to Solaris 11, we can start to see the fruits of their labors, with more FOSS updates in 11.1 than we had in many Solaris 10 update releases, keeping software more up to date with the upstream communities. Of course, just because we can more easily update now, doesn’t always mean we should or will do so, it just removes the package system limitations from forcing the decision for us. So while we’ve upgraded the X Window System in the 11.1 release from X11R7.6 to 7.7, the Solaris GNOME team decided it was not the right time to try to make the jump from GNOME 2 to GNOME 3, though they did update some individual components of the desktop, especially those with security fixes like Firefox. In other parts of the system, decisions as to what to update were prioritized based on how they affected other projects, or what customer requests we’d gotten for them. So with all that background in place, what packages did we actually update or add between Solaris 11.0 and 11.1? Core OS Functionality One of the FOSS changes with the biggest impact in this release is the upgrade from Grub Legacy (0.97) to Grub 2 (1.99) for the x64 platform boot loader. This is the cause of one of the upgrade quirks, since to go from Solaris 11.0 to 11.1 on x64 systems, you first need to update the Boot Environment tools (such as beadm) to a new version that can handle boot environments that use the Grub2 boot loader. System administrators can find the details they need to know about the new Grub in the Administering the GRand Unified Bootloader chapter of the Booting and Shutting Down Oracle Solaris 11.1 Systems guide. This change was necessary to be able to support new hardware coming into the x64 marketplace, including systems using UEFI firmware or booting off disk drives larger than 2 terabytes. For both platforms, Solaris 11.1 adds rsyslog as an optional alternative to the traditional syslogd, and OpenSCAP for checking security configuration settings are compliant with site policies. Note that the support repo actually has newer versions of BIND & fetchmail than the 11.1 release, as some late breaking critical fixes came through from the community upstream releases after the Solaris 11.1 release was frozen, and made their way to the support repository. These are responsible for the other big upgrade quirk in this release, in which to upgrade a system which already installed those versions from the support repo, you need to either wait for those packages to make their way to the 11.1 branch of the support repo, or follow the steps in the aforementioned upgrade walkthrough to let the package system know it's okay to temporarily downgrade those. Developer Stack While Solaris 11.0 included Python 2.7, many of the bundled python modules weren’t packaged for it yet, limiting its usability. For 11.1, many more of the python modules include 2.7 versions (enough that I filtered them out of the below table, but you can always search on the package repository server for them. For other language runtimes and development tools, 11.1 expands the use of IPS mediated links to choose which version of a package is the default when the packages are designed to allow multiple versions to install side by side. For instance, in Solaris 11.0, GNU automake 1.9 and 1.10 were provided, and developers had to run them as either automake-1.9 or automake-1.10. In Solaris 11.1, when automake 1.11 was added, also added was a /usr/bin/automake mediated link, which points to the automake-1.11 program by default, but can be changed to another version by running the pkg set-mediator command. Mediated links were also used for the Java runtime & development kits in 11.1, changing the default versions to the Java 7 releases (the 1.7.0.x package versions), while allowing admins to switch links such as /usr/bin/javac back to Java 6 if they need to for their site, to deal with Java 7 compatibility or other issues, without having to update each usage to use the full versioned /usr/jdk/jdk1.6.0_35/bin/javac paths for every invocation. Desktop Stack As I mentioned before, we upgraded from X11R7.6 to X11R7.7, since a pleasant coincidence made the X.Org release dates line up nicely with our feature & code freeze dates for this release. (Or perhaps it wasn’t so coincidental, after all, one of the benefits of being the person making the release is being able to decide what schedule is most convenient for you, and this one worked well for me.) For the table below, I’ve skipped listing the packages in which we use the X11 “katamari” version for the Solaris package version (mainly packages combining elements of multiple upstream modules with independent version numbers), since they just all changed from 7.6 to 7.7. In the graphics drivers, we worked with Intel to update the Intel Integrated Graphics Processor support to support 3D graphics and kernel mode setting on the Ivy Bridge chipsets, and updated Nvidia’s non-FOSS graphics driver from 280.13 to 295.20. Higher up in the desktop stack, PulseAudio was added for audio support, and liblouis for Braille support, and the GNOME applications were built to use them. The Mozilla applications, Firefox & Thunderbird moved to the current Extended Support Release (ESR) versions, 10.x for each, to bring up-to-date security fixes without having to be on Mozilla’s agressive 6 week feature cycle release train. Detailed list of changes This table shows most of the changes to the FOSS packages between Solaris 11.0 and 11.1. As noted above, some were excluded for clarity, or to reduce noise and duplication. All the FOSS packages which didn't change the version number in their packaging info are not included, even if they had updates to fix bugs, security holes, or add support for new hardware or new features of Solaris. Package11.011.1 archiver/unrar 3.8.5 4.1.4 audio/sox 14.3.0 14.3.2 backup/rdiff-backup 1.2.1 1.3.3 communication/im/pidgin 2.10.0 2.10.5 compress/gzip 1.3.5 1.4 compress/xz not included 5.0.1 database/sqlite-3 3.7.6.3 3.7.11 desktop/remote-desktop/tigervnc 1.0.90 1.1.0 desktop/window-manager/xcompmgr 1.1.5 1.1.6 desktop/xscreensaver 5.12 5.15 developer/build/autoconf 2.63 2.68 developer/build/autoconf/xorg-macros 1.15.0 1.17 developer/build/automake-111 not included 1.11.2 developer/build/cmake 2.6.2 2.8.6 developer/build/gnu-make 3.81 3.82 developer/build/imake 1.0.4 1.0.5 developer/build/libtool 1.5.22 2.4.2 developer/build/makedepend 1.0.3 1.0.4 developer/documentation-tool/doxygen 1.5.7.1 1.7.6.1 developer/gnu-binutils 2.19 2.21.1 developer/java/jdepend not included 2.9 developer/java/jdk-6 1.6.0.26 1.6.0.35 developer/java/jdk-7 1.7.0.0 1.7.0.7 developer/java/jpackage-utils not included 1.7.5 developer/java/junit 4.5 4.10 developer/lexer/jflex not included 1.4.1 developer/parser/byaccj not included 1.14 developer/parser/java_cup not included 0.10 developer/quilt 0.47 0.60 developer/versioning/git 1.7.3.2 1.7.9.2 developer/versioning/mercurial 1.8.4 2.2.1 developer/versioning/subversion 1.6.16 1.7.5 diagnostic/constype 1.0.3 1.0.4 diagnostic/nmap 5.21 5.51 diagnostic/scanpci 0.12.1 0.13.1 diagnostic/wireshark 1.4.8 1.8.2 diagnostic/xload 1.1.0 1.1.1 editor/gnu-emacs 23.1 23.4 editor/vim 7.3.254 7.3.600 file/lndir 1.0.2 1.0.3 image/editor/bitmap 1.0.5 1.0.6 image/gnuplot 4.4.0 4.6.0 image/library/libexif 0.6.19 0.6.21 image/library/libpng 1.4.8 1.4.11 image/library/librsvg 2.26.3 2.34.1 image/xcursorgen 1.0.4 1.0.5 library/audio/pulseaudio not included 1.1 library/cacao 2.3.0.0 2.3.1.0 library/expat 2.0.1 2.1.0 library/gc 7.1 7.2 library/graphics/pixman 0.22.0 0.24.4 library/guile 1.8.4 1.8.6 library/java/javadb 10.5.3.0 10.6.2.1 library/java/subversion 1.6.16 1.7.5 library/json-c not included 0.9 library/libedit not included 3.0 library/libee not included 0.3.2 library/libestr not included 0.1.2 library/libevent 1.3.5 1.4.14.2 library/liblouis not included 2.1.1 library/liblouisxml not included 2.1.0 library/libtecla 1.6.0 1.6.1 library/libtool/libltdl 1.5.22 2.4.2 library/nspr 4.8.8 4.8.9 library/openldap 2.4.25 2.4.30 library/pcre 7.8 8.21 library/perl-5/subversion 1.6.16 1.7.5 library/python-2/jsonrpclib not included 0.1.3 library/python-2/lxml 2.1.2 2.3.3 library/python-2/nose not included 1.1.2 library/python-2/pyopenssl not included 0.11 library/python-2/subversion 1.6.16 1.7.5 library/python-2/tkinter-26 2.6.4 2.6.8 library/python-2/tkinter-27 2.7.1 2.7.3 library/security/nss 4.12.10 4.13.1 library/security/openssl 1.0.0.5 (1.0.0e) 1.0.0.10 (1.0.0j) mail/thunderbird 6.0 10.0.6 network/dns/bind 9.6.3.4.3 9.6.3.7.2 package/pkgbuild not included 1.3.104 print/filter/enscript not included 1.6.4 print/filter/gutenprint 5.2.4 5.2.7 print/lp/filter/foomatic-rip 3.0.2 4.0.15 runtime/java/jre-6 1.6.0.26 1.6.0.35 runtime/java/jre-7 1.7.0.0 1.7.0.7 runtime/perl-512 5.12.3 5.12.4 runtime/python-26 2.6.4 2.6.8 runtime/python-27 2.7.1 2.7.3 runtime/ruby-18 1.8.7.334 1.8.7.357 runtime/tcl-8/tcl-sqlite-3 3.7.6.3 3.7.11 security/compliance/openscap not included 0.8.1 security/nss-utilities 4.12.10 4.13.1 security/sudo 1.8.1.2 1.8.4.5 service/network/dhcp/isc-dhcp 4.1 4.1.0.6 service/network/dns/bind 9.6.3.4.3 9.6.3.7.2 service/network/ftp (ProFTPD) 1.3.3.0.5 1.3.3.0.7 service/network/samba 3.5.10 3.6.6 shell/conflict 0.2004.9.1 0.2010.6.27 shell/pipe-viewer 1.1.4 1.2.0 shell/zsh 4.3.12 4.3.17 system/boot/grub 0.97 1.99 system/font/truetype/liberation 1.4 1.7.2 system/library/freetype-2 2.4.6 2.4.9 system/library/libnet 1.1.2.1 1.1.5 system/management/cim/pegasus 2.9.1 2.11.0 system/management/ipmitool 1.8.10 1.8.11 system/management/wbem/wbemcli 1.3.7 1.3.9.1 system/network/routing/quagga 0.99.8 0.99.19 system/rsyslog not included 6.2.0 terminal/luit 1.1.0 1.1.1 text/convmv 1.14 1.15 text/gawk 3.1.5 3.1.8 text/gnu-grep 2.5.4 2.10 web/browser/firefox 6.0.2 10.0.6 web/browser/links 1.0 1.0.3 web/java-servlet/tomcat 6.0.33 6.0.35 web/php-53 not included 5.3.14 web/php-53/extension/php-apc not included 3.1.9 web/php-53/extension/php-idn not included 0.2.0 web/php-53/extension/php-memcache not included 3.0.6 web/php-53/extension/php-mysql not included 5.3.14 web/php-53/extension/php-pear not included 5.3.14 web/php-53/extension/php-suhosin not included 0.9.33 web/php-53/extension/php-tcpwrap not included 1.1.3 web/php-53/extension/php-xdebug not included 2.2.0 web/php-common not included 11.1 web/proxy/squid 3.1.8 3.1.18 web/server/apache-22 2.2.20 2.2.22 web/server/apache-22/module/apache-sed 2.2.20 2.2.22 web/server/apache-22/module/apache-wsgi not included 3.3 x11/diagnostic/xev 1.1.0 1.2.0 x11/diagnostic/xscope 1.3 1.3.1 x11/documentation/xorg-docs 1.6 1.7 x11/keyboard/xkbcomp 1.2.3 1.2.4 x11/library/libdmx 1.1.1 1.1.2 x11/library/libdrm 2.4.25 2.4.32 x11/library/libfontenc 1.1.0 1.1.1 x11/library/libfs 1.0.3 1.0.4 x11/library/libice 1.0.7 1.0.8 x11/library/libsm 1.2.0 1.2.1 x11/library/libx11 1.4.4 1.5.0 x11/library/libxau 1.0.6 1.0.7 x11/library/libxcb 1.7 1.8.1 x11/library/libxcursor 1.1.12 1.1.13 x11/library/libxdmcp 1.1.0 1.1.1 x11/library/libxext 1.3.0 1.3.1 x11/library/libxfixes 4.0.5 5.0 x11/library/libxfont 1.4.4 1.4.5 x11/library/libxft 2.2.0 2.3.1 x11/library/libxi 1.4.3 1.6.1 x11/library/libxinerama 1.1.1 1.1.2 x11/library/libxkbfile 1.0.7 1.0.8 x11/library/libxmu 1.1.0 1.1.1 x11/library/libxmuu 1.1.0 1.1.1 x11/library/libxpm 3.5.9 3.5.10 x11/library/libxrender 0.9.6 0.9.7 x11/library/libxres 1.0.5 1.0.6 x11/library/libxscrnsaver 1.2.1 1.2.2 x11/library/libxtst 1.2.0 1.2.1 x11/library/libxv 1.0.6 1.0.7 x11/library/libxvmc 1.0.6 1.0.7 x11/library/libxxf86vm 1.1.1 1.1.2 x11/library/mesa 7.10.2 7.11.2 x11/library/toolkit/libxaw7 1.0.9 1.0.11 x11/library/toolkit/libxt 1.0.9 1.1.3 x11/library/xtrans 1.2.6 1.2.7 x11/oclock 1.0.2 1.0.3 x11/server/xdmx 1.10.3 1.12.2 x11/server/xephyr 1.10.3 1.12.2 x11/server/xorg 1.10.3 1.12.2 x11/server/xorg/driver/xorg-input-keyboard 1.6.0 1.6.1 x11/server/xorg/driver/xorg-input-mouse 1.7.1 1.7.2 x11/server/xorg/driver/xorg-input-synaptics 1.4.1 1.6.2 x11/server/xorg/driver/xorg-input-vmmouse 12.7.0 12.8.0 x11/server/xorg/driver/xorg-video-ast 0.91.10 0.93.10 x11/server/xorg/driver/xorg-video-ati 6.14.1 6.14.4 x11/server/xorg/driver/xorg-video-cirrus 1.3.2 1.4.0 x11/server/xorg/driver/xorg-video-dummy 0.3.4 0.3.5 x11/server/xorg/driver/xorg-video-intel 2.10.0 2.18.0 x11/server/xorg/driver/xorg-video-mach64 6.9.0 6.9.1 x11/server/xorg/driver/xorg-video-mga 1.4.13 1.5.0 x11/server/xorg/driver/xorg-video-openchrome 0.2.904 0.2.905 x11/server/xorg/driver/xorg-video-r128 6.8.1 6.8.2 x11/server/xorg/driver/xorg-video-trident 1.3.4 1.3.5 x11/server/xorg/driver/xorg-video-vesa 2.3.0 2.3.1 x11/server/xorg/driver/xorg-video-vmware 11.0.3 12.0.2 x11/server/xserver-common 1.10.3 1.12.2 x11/server/xvfb 1.10.3 1.12.2 x11/server/xvnc 1.0.90 1.1.0 x11/session/sessreg 1.0.6 1.0.7 x11/session/xauth 1.0.6 1.0.7 x11/session/xinit 1.3.1 1.3.2 x11/transset 0.9.1 1.0.0 x11/trusted/trusted-xorg 1.10.3 1.12.2 x11/x11-window-dump 1.0.4 1.0.5 x11/xclipboard 1.1.1 1.1.2 x11/xclock 1.0.5 1.0.6 x11/xfd 1.1.0 1.1.1 x11/xfontsel 1.0.3 1.0.4 x11/xfs 1.1.1 1.1.2 P.S. To get the version numbers for this table, I ran a quick perl script over the output from: % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.1.0.0.24` \ | sort /tmp/11.1 % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.0.0.0.2` \ | sort /tmp/11.0

    Read the article

  • "Fatal Error" message during boot process

    - by Denja
    I'm running Ubuntu 10.10 with ATI proprietary FGLRX graphic drivers When I boot, I can see this very quick message appearing; I don't have time to read it: **Fatal Error ..................................**(&@something i cant read) I searched through the log file in /var/log/ in order to find what is wrong and I did find something in the /var/log/Xorg.1.log: 21:31:08 [ 15.734] (--) using VT number 1 [ 204.647] Fatal server error: [ 204.647] xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call [ 204.647] [ 204.647] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 204.647] Please also check the log file at "/var/log/Xorg.1.log" for additional information. [ 204.647] But this is already Xorg.1.log. And there is a Xorg.0.log also & Xorg.0.log.old but it doesnt have any error in it. My system seems to work properly and it seems its not affected by this But how do I correct this message? Any suggestions?

    Read the article

  • Fatal Error when booting

    - by Denja
    I'm running Ubuntu 10.10 with ATI proprietary FGLRX graphic drivers When I boot, I can see this very quick message appearing; I don't have time to read it: **Fatal Error ..................................**(&@something i cant read) I searched through the log file in /var/log/ in order to find what is wrong and I did find something in the /var/log/Xorg.1.log: 21:31:08 [ 15.734] (--) using VT number 1 [ 204.647] Fatal server error: [ 204.647] xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call [ 204.647] [ 204.647] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 204.647] Please also check the log file at "/var/log/Xorg.1.log" for additional information. [ 204.647] But this is already Xorg.1.log. And there is a Xorg.0.log also & Xorg.0.log.old but it doesnt have any error in it. My system seems to work properly and it seems its not affected by this But how do I correct this message? Any suggestions?

    Read the article

  • Can't use nvidia card/driver on optimus notebook

    - by Mr. Pixel
    I installed (once again) the latest official nvidia driver for my GT540m on Ubuntu 11.10. Even though everything seems OK with my xorg.conf file (I've manually added BusID "PCI:1:0:0", since lspci shows 01:00.0 for my GPU). The problem is, when I use the xorg.conf file generated by Xorg -configure, Xorg automatically loads the Intel GPU. So I removed everything that was not related to my nvidia card, basically leaving my xorg.conf with one screen and one device (with the nvidia driver and the above-mentioned BusID), and Xorg fails to start. The log says something like "Devices on GT540m [newline] none" And a few lines later, something like "NVIDIA(0) found a screen, but have no device for it". When I don't set the BusID, it doesn't seem to detect my card either. Thank you for any suggestion. PS: If possible, I'd like to avoid bumblebee or any similar "hybrid graphics" solution, last time I tried I ended up reinstalling Ubuntu. Edit: Allow me to clarify the problem. I have a notebook with a GT540m graphics card, and an integrated intel gpu. I want to use the graphics card with full hardware acceleration and its official driver, as I do under windows.

    Read the article

  • Ubuntu 12.10 ATI Driver 12.11 fails after compiz and xorg update

    - by Lukasz W.
    I updated my system via the package manager from Unity and next restart was just blackness. After being here: http://linux.hootip.com/amd-catalyst-12-11-beta-fix-and-installation-the-drivers-on-ubuntu-12-11/ I had the Catalyst 12.11 Beta driver installed. I checked my /var/log/apt/history.log and the update I received was of compiz and xorg packages. I tried to get latest release info, but all I get from their pages are commit info; I can't tell what was n the package update I got served. Anyone knows what was in the latest xorg/compiz release that broke the driver? Which driver should I use now? For completeness this is how I got the system back to boot (probably lame and not elegant): Boot with GRUB selection "More Ubuntu options (or sth like that), From secondary screen select 3.5.0-19 with boot options, When system prompts on stuff you'd like to do, select "root" - Drop to root shell, There: # mount -o remount,rw / # mv /etc/X11/xorg.conf /etc/X11/xorg.conf.failed # /usr/share/ati/fglrx-uninstall.sh # reboot This got be back on my feet.

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    Hello. I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so I reset the machine. There must be a way round this. Any help to set up a dual head config for Ubuntu using Config #1 would be hugely appreciated. TIA, Mike

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so

    Read the article

  • Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10?

    - by Kendall Gifford
    I'd like to move from windows with my current workstation. The only thing holding me back is that I have 3 monitors connected to the system and I really take advantage of the real estate when working. I just installed Ubuntu 10.10 on the system and one of the monitors is up and running just fine. This monitor is connected to the built-in Intel adapter. I also have two old nVidia GeForce4 MX 4000 (nv19pl) cards in my two PCI slots with two monitors connected to them respectively. I installed the legacy (and proprietary) nVidia drivers (the nvidia-96 package) that claims to support these old cards. Now the question is how to get X configured to use all adapters (using two different drivers) so I can use all three monitors (and is this even possible)? From what I've read, it looks like I'll have to write an xorg.conf file since the nVidia driver doesn't support the auto-magic configuration supported by other drivers. On this site: http://wiki.ubuntu.com/X/Config it says that on 10.10 I just need to write an xorg.conf "containing only those sections and options that you need to override Xorg's autoconfigurated settings". So, does this mean I can get away with only including the nVidia-specific configuration stuff and all else will get auto-configured? Or, will providing a config with a "Device" section overrule the auto-magic from detecting/using the Intel adapter? I ran the included nvidia-xconfig to generate a basic, nVidia-specific xorg.conf but I'm hesitant to reboot with it in place, suspecting I'll have a screwed up display. Also, is there any way (any tool or command) to generate an xorg.conf from the current, auto-configured running state of an X session? If I have to write a full, complete config, I'd rather start with one that includes everything that's been auto-detected thus far (and merge it with my nVidia version). Anyhow, any info and thoughts are greatly appreciated (as are answers).

    Read the article

  • Black screen after login, after Kubuntu upgrade from 13.04 to 13.10

    - by Soul Trace
    After upgrade from 13.04 to 13.10 I have troubles with Xorg - all boot process goes fine, but I have a black screen when Xorg starts (KDE starts, and I can hear AC adapter (dis)connect sounds). Trouble is in Xorg only, framebuffer console (ctrl-alt-f2) works fine, backlight turns on when I switch to console and turns off again after I switch back to X. All worked fine before release upgrade. I'm running AMD64 version of Kubuntu 13.10 on Samsung RV508 (Intel i915 graphic, no EFI) notebook. Xorg 1.14.3, kernel 3.11.0-12 UPDATE: I have tried to boot using old kernel (3.8.0-13) and now it's working fine with that kernel.

    Read the article

  • Dual monitors, screen resolution, xorg.conf.d

    - by Flase
    I do a lot of RTFM but this one has got me stuck. I have Ubuntu Studio 12.04 Precise Pangolin with XFCE as its default desktop. My old HIS ATI Radeon 9250 graphics card was adding red crud across the screen with the generic driver, but downloading the proprietary "fglrx" driver makes it work cleanly. The trouble is the Catalyst control centre refuses to recognise my old card so I must do some manual configuring to make sure both the DVI and VGA monitors are capable of the correct screen resolution (both 1280x1024) and a dual display. It used to be easier to just edit the existing xorg.conf file and add another resolution and so forth, but now there are automatic xorg.conf.d directories (more than one) with scant documentation. Creating a generic xorg.conf with a terminal command creates every setting imaginable. What I want to do is create the simplest conf file which just tells the system the following: My VGA monitor can do 1280x1024 60Hz The two monitors together may be 2560x1024 width The VGA monitor on the right I might need to specify Xinerama if it's needed Thank you. I don't think I need to bore you with log files, but please ask for further info. Mike

    Read the article

  • Is it possible to have DisplayLink USB display hotplugging with Xorg 1.13 on kernel 3.4?

    - by lkraav
    keithp seems to be the only one on the interwebs to have written anything about the subject and he worked with 3.5_rc. I don't want to go above 3.4 at the moment for various stability reasons and am trying to see whether I can get this to work. Xorg 1.13 recognizes the display on connection, "udl" module is loaded, xorg-video-modesetting driver also loads, display lights up. So everything seems to be good. I emerged xrandr-9999 (not many changes on top of 1.3.5): $ xrandr --listproviders Providers: number : 2 Provider 0: id: 69 cap: 0x0 crtcs: 2 outputs: 4 associated providers: 0 name:Intel Provider 1: id: 338 cap: 0x0 crtcs: 1 outputs: 1 associated providers: 0 name:modesetting But I can't get any further, just like this guy: $ xrandr --setprovideroutputsource 338 69 X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 139 (RANDR) Minor opcode of failed request: 35 () Value in failed request: 0x152 Serial number of failed request: 11 Current serial number in output stream: 12 $ xrandr --setprovideroutputsource 1 0 X Error of failed request: 148 Major opcode of failed request: 139 (RANDR) Minor opcode of failed request: 35 () Serial number of failed request: 11 Current serial number in output stream: 12 Any thoughts?

    Read the article

  • Ubuntu 12.04 lightdm dumps to tty. Cannot start GUI interface when booting off harddrive, but can when booting off usb

    - by user72681
    When booting, lightdm dumps to tty. No GUI interface works- this is after a fresh install of Ubuntu 12.04 where the GUI interface works when running off the USB. I have an NVIDIA Corporation G98 [Quadro NVS 420] graphics card. After I call startx from the terminal it still doesn't work. I get the following in the Xorg.0.log: [ 327.718] (--) NVIDIA(0): Memory: 262144 kBytes [ 327.718] (--) NVIDIA(0): VideoBIOS: 62.98.6f.00.07 [ 327.718] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 327.718] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 327.756] (--) NVIDIA(0): Connected display device(s) on Quadro NVS 420 at PCI:3:0:0 [ 327.756] (--) NVIDIA(0): none [ 327.756] (EE) NVIDIA(0): No display devices found for this X screen. [ 328.010] (II) UnloadModule: "nvidia" [ 328.010] (II) Unloading nvidia [ 328.010] (II) UnloadModule: "wfb" [ 328.010] (II) Unloading wfb [ 328.010] (II) UnloadModule: "fb" [ 328.010] (II) Unloading fb [ 328.011] (EE) Screen(s) found, but none have a usable configuration. [ 328.011] Fatal server error: [ 328.011] no screens found /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting local X display [+0.00s] DEBUG: X server :0 will replace Plymouth [+0.02s] DEBUG: Using VT 7 [+0.02s] DEBUG: Activating VT 7 [+0.02s] DEBUG: Logging to /var/log/lightdm/x-0.log [+0.02s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+0.02s] DEBUG: Launching X Server [+0.02s] DEBUG: Launching process 1074: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none [+0.02s] DEBUG: Waiting for ready signal from X server :0 [+0.02s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.02s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+1.38s] DEBUG: Process 1074 exited with return value 1 [+1.38s] DEBUG: X server stopped [+1.38s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+1.38s] DEBUG: Releasing VT 7 [+1.38s] DEBUG: Stopping Plymouth, X server failed to start [+1.39s] DEBUG: Display server stopped [+1.39s] DEBUG: Stopping display [+1.39s] DEBUG: Display stopped [+1.39s] DEBUG: Stopping X local seat, failed to start a display [+1.39s] DEBUG: Stopping seat [+1.39s] DEBUG: Seat stopped [+1.39s] DEBUG: Required seat has stopped [+1.39s] DEBUG: Stopping display manager [+1.39s] DEBUG: Display manager stopped [+1.39s] DEBUG: Stopping daemon [+1.39s] DEBUG: Exiting with return value 1 /var/log/lightdm/x-0.log X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-31-server x86_64 Ubuntu Current Operating System: Linux oorn 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=b25ab072-077d-40f1-95a4-c7fd66acd2f0 ro reboot=pci quiet splash vt.handoff=7 Build Date: 07 May 2012 11:43:21PM xorg-server 2:1.11.4-0ubuntu10.2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.24.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 27 12:51:45 2012 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) NVIDIA(0): No display devices found for this X screen. (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Server terminated with error (1). Closing log file.

    Read the article

  • Graphical driver 13.10 ATI RV630

    - by Michael Cephalus
    I started updating the distro from 13.04 to 13.10. Then I got my hands on a Radeon HD 2600. I installed the RV630 compatible Catalystdriver from the official webpage. Then xserver crashed everytime I opened a browser or vlc fx. I took notice that there was no driver listed in configuration underneath. michael@statubtunu:~$ lshw -c video WARNING: you should run this program as super-user. *-display UNCLAIMED description: VGA compatible controller product: RV630 PRO [Radeon HD 2600 PRO] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list configuration: latency=0 resources: memory:d0000000-dfffffff memory:e0500000-e050ffff ioport:1000(size=256) memory:e0000000-e001ffff i installed additional drivers from jockey and the ubuntu softwarecenter ati-driver. though that only made it to crash xserver completely and when i type: michael@statubtunu:~$ sudo startx X.Org X Server 1.14.3 Release Date: 2013-09-12 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu Current Operating System: Linux statubtunu 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 17:26:33 UTC 2013 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=8fb2e395-0ea2-4f45-ac66-225696b7ce2c ro quiet splash vt.handoff=7 Build Date: 15 October 2013 09:23:29AM xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.30.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 12 18:50:02 2013 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Initializing built-in extension Generic Event Extension Initializing built-in extension SHAPE Initializing built-in extension MIT-SHM Initializing built-in extension XInputExtension Initializing built-in extension XTEST Initializing built-in extension BIG-REQUESTS Initializing built-in extension SYNC Initializing built-in extension XKEYBOARD Initializing built-in extension XC-MISC Initializing built-in extension SECURITY Initializing built-in extension XINERAMA Initializing built-in extension XFIXES Initializing built-in extension RENDER Initializing built-in extension RANDR Initializing built-in extension COMPOSITE Initializing built-in extension DAMAGE Initializing built-in extension MIT-SCREEN-SAVER Initializing built-in extension DOUBLE-BUFFER Initializing built-in extension RECORD Initializing built-in extension DPMS Initializing built-in extension X-Resource Initializing built-in extension XVideo Initializing built-in extension XVideo-MotionCompensation Initializing built-in extension SELinux Initializing built-in extension XFree86-VidModeExtension Initializing built-in extension XFree86-DGA Initializing built-in extension XFree86-DRI Initializing built-in extension DRI2 Loading extension GLX ERROR: could not insert 'fglrx': No such device (II) [KMS] drm report modesetting isn't supported. (EE) (EE) Backtrace: (EE) 0: /usr/bin/X (xorg_backtrace+0x49) [0xb77780b9] (EE) 1: /usr/bin/X (0xb75d8000+0x1a3e24) [0xb777be24] (EE) 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb75b540c] (EE) 3: /usr/bin/X (xf86findOption+0x2a) [0xb7681daa] (EE) 4: /usr/bin/X (xf86findOptionValue+0x23) [0xb7681f43] (EE) 5: /usr/bin/X (0xb75d8000+0x7ebfd) [0xb7656bfd] (EE) 6: /usr/bin/X (xf86ProcessOptions+0x37) [0xb7657507] (EE) 7: /usr/lib/xorg/modules/libvbe.so (vbeDoEDID+0xe7) [0xb5eb8647] (EE) 8: /usr/lib/xorg/modules/drivers/vesa_drv.so (0xb5ee7000+0x287c) [0xb5ee987c] (EE) 9: /usr/bin/X (InitOutput+0xb23) [0xb7659c33] (EE) 10: /usr/bin/X (0xb75d8000+0x2a30b) [0xb760230b] (EE) 11: /lib/i386-linux-gnu/libc.so.6 (__libc_start_main+0xf5) [0xb71ba905] (EE) 12: /usr/bin/X (0xb75d8000+0x2a908) [0xb7602908] (EE) (EE) Segmentation fault at address 0x5 (EE) Fatal server error: (EE) Caught signal 11 (Segmentation fault). Server aborting (EE) (EE) Please consult the The X.Org Foundation support at for help. (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. (EE) (EE) Server terminated with error (1). Closing log file. This is what comes, but no GUI. Is there any way to deal with this?

    Read the article

  • Radeon HD 2000, 3000, 4000 on 12.10 Quantal: fglrx (legacy) 12.6 unsupported, what to do?

    - by Andrew Mao
    After upgrading to 12.10 quantal, the packaged version of fglrx no longer works. I discovered that this is because there is a separate 'legacy' fglrx driver for the HD 2k-4k series cards, but it is incompatible with the xorg server on 12.10. This is the most current version of the driver for HD 2000 through HD 4000 series cards. You can't use the non-legacy fglrx driver, but you can use the open-source radeon driver if you prefer your WM compositing to be laggy and your YouTube videos to play like they would on a Pentium MMX series: http://support.amd.com/us/kbarticles/Pages/catalyst126legacyproducts.aspx Usually this driver can be installed in the following way, necessary because apt-get install fglrx would pull in the non-legacy driver: wget http://www2.ati.com/drivers/legacy/amd-driver-installer-12.6-legacy-x86.x86_64.zip unzip amd-driver-installer-* sudo sh ./amd-driver-installer-*.run --buildpkg Ubuntu/quantal sudo dpkg -i fglrx*.deb sudo aticonfig --initial -f If you use a different version of fglrx (for example, a newer 12.9 that doesn't support those cards) then the final command will give you an error no supported hardware detected or something similar. However, everything works at this point and you will get a reasonable xorg.conf: ... other stuff Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:5:0" EndSection ... other stuff At this point you're supposed to reboot and everything will be working with the fglrx driver. However, upon rebooting, you'll be treated to the following errors in Xorg.0.log when fglrx attempts to load: (EE) Failed to load /usr/lib/xorg/modules/drivers/fglrx_drv.so: /usr/lib/xorg/modules/drivers/fglrx_drv.so: undefined symbol: noXFree86DRIExtension Some searching around will show that this is a problem with the legacy ATI drivers not supporting xserver 1.13 or newer. (Arch Linux thread) ATI has released a fixed driver for its most recent (HD 5000 series or later) cards, but not for the 'legacy' cards yet. The non-legacy ATI drivers can't be used with the old cards. What should an Ubuntu user, using one of these HD 2000-4000 series cards, do? Wait for an updated 'legacy' ATI driver that properly works with xserver 1.13? Downgrade back to 12.04 Precise, which uses xserver 1.11? Try to downgrade xserver on 12.10 Quantal to 1.12, which could possibly break Unity and GNOME? Forced upgrade to HD 5000 series or later card? (Not possible with integrated graphics...) Some other 1337 action that fixes this problem painlessly?

    Read the article

  • 3 Monitors, Ubuntu 12.04, Gnome 3, 2 nvidia cards, WITH xrandr or xinerama?

    - by Josh
    Ok. I have been banging my head against the wall for over a week now trying to get 3 monitors to work. I have: 1 - Nvidia 8600 GT 512MB PCIEx16 1 - Nvidia GT 240 1GB PCIEx16 They are not running in SLI (obviously). I have tried to use everything from tutorials to a few templates, all the way up to nvidia-settings, etc etc etc.. From what I hear, Xinerama doesnt like gnome 3 because of the compositing, although I have read a lot about using Xrandr instead, and getting the compositing working, but alas, I cannot. It always either crashes X and I have to replace the xorg.conf with my backup, or it defaults to the gnome-classic desktop, and on top of that, when it does default, it keeps adding more and more panels. Basically, I want to be able to use all 3 monitors (yes, just like in windows) to drag and drop from different windows. I have xorg-edit, but I am still not too sure on how to set this up? Is there any way to: A Get compositing working with 3 monitors, 2 nvidia cards, xinerama, and gnome 3? or BUse twinview with 3 monitors (I have heard it can be done by manually editing xorg.conf) or CSet up Xrandr to draw all 3 monitors with compositing. or DUse separate X for each monitor, and be able to use gnome with compositing, as well as drag between all 3 or EANYTHING. lol. I just want this to work. Any help you can provide would be greatly appreciated. BTW, I am running an ubuntu mini install with gnome. Everything works great but this. I can run it fine with 2 monitors and compositing, but not with 3. Also, what is the best GUI tool for editing xorg.conf? Im not finding anything that is up to date at all, and also is understandable by humans. haha. Im actually an engineer by trade, and have been working with computers a LONG time, but this xorg.conf stuff is really confusing the crap out of me. lol Thanks!

    Read the article

  • Ubuntu 14.04 ATI Radeon open source driver with distorted video playback

    - by Bwog
    Video in VLC or SMplayer is often in black and white with washed-out colors in the wrong place (translated considerably). Moreover, the last video image is often visible when a new video is started and persist as long as the new video is running. Colors have a recognizable shape (e.g. a persons clothes or face), but can be obviously incorrect (e.g. green or purples faces). This is independent of the format of the videos (mp4, mkv, wmv). Sometimes all problems disappear when a new video is started, but often only a reboot restores normal video. Ubuntu was upgraded to 14.04 and is fully updated. Processor intel core i5-2500K cpu. gpu: amd/ati Radeon HD 7950. graphics: gallium 0.4 on AMD Tahiti. xorg xserver amd/ati display driver wrapper from xserver-xorg-video-ati. :~$ Xorg -version X.Org X Server 1.15.1 Release Date: 2014-04-13 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu Current Operating System: Linux Mare 3.13.0-29-generic #53-Ubuntu SMP Wed Jun 4 21:00:20 UTC 2014 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=number ro Build Date: 16 April 2014 01:36:29PM xorg-server 2:1.15.1-0ubuntu2 Current version of pixman: 0.30.2 ~$ lspci | grep VGA 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti PRO [Radeon HD 7950/8950 OEM / R9 280] Question: how to restore regular video playback?

    Read the article

  • Nvidia 740M still not working after Bumblebee installation

    - by Jon
    first of all, I have checked a lot of similar topics, but I still can't get my laptop to use Nvidia 740M. So first things first. I have a laptop Asus X550V(i5-3230, 4gb RAM, Nvidia 740M + Intel HD4000). I installed Ubuntu 13.10 alongside Win8(preinstalled) and both systems are running without problems. However, I have problem with second graphic card(Nvidia 740M), as Ubuntu doesn't recognize it. I installed bumblebee with this tutorial https://wiki.ubuntu.com/Bumblebee#Installation, but I still get error "Cannot access secondary GPU" error when trying to run ''optirun Steam'' in terminal. Then I tried to do this: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected. you need to edit the /etc/bumblebee/xorg.conf.nvidia (or /etc/bumblebee/xorg.conf.nouveau if using the noveau driver) and specify the correct BusID by following the instructions therein. But with lspci / VGA i get only info about Intel 4000, but no Nvidia. When I type only lspci, I get the line for Nvidia 740M,but after I edit the config file I still get second card error. Also, in /etc/bumblebee/xorg.conf.nvidia there wasn't BusID or anything similar, so I just added the whole line in device section. As I sad, I tried a lot of things to get it working, avoiding this forum(as I din't want to bother people with some solutions possible), but alas!, I had to bother you. If there is a need for some additional info, just say, no problem at all. Thank you very much in advance. :)

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >