Search Results

Search found 4126 results on 166 pages for 'barney white'.

Page 40/166 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

  • Master Reset iPhone - How?

    - by sagar
    Actually - I had a problem with my iPhone. My iphone battery was down & it was switched off. I plugged in it for charging, but after some time - iPhone had a complete white screen. I don't know what actually had happened. Every thing was working perfectly. means suppose I press lock ( button on top-right side ) it sounds that iphone is locked. when I pressed home button & slide on bottom of the screen - it sounds that iphone is unlocked - but the only problem was - screen remains "white" only. someone told me - it needs master reset. I went to an engineer & he just master reset to iPhone. I am wondering how an iPhone can be master reset ? can you guide me about it ? Thanks in advance for sharing your knowledge. Sagar

    Read the article

  • Motherboard wiring

    - by ML
    I am putting a new motherboard in a chenbro chasis and I dont get how to plugin the wires for powerSW resetSW, etc. It is a SuperMicro P4DP6 motherboard. ** I cant post an image yet, but here is a long to the spot on the mobo where this goes: http://andrewslack.info/mobo.png The powerSW lead is a green and white wire. I have the wire for PowerSW in place as the white wire ground and I have tried the reverse even (green to ground). The wire is covering Pin 1 and 2 in the diagram And I press the power button on the machine and nothing happens. It worked before I replaced the motherboard, the 24-pin ATX power leas is connected as well as the 2dn 6-pin optional power. Thoughts?

    Read the article

  • Motherboard wiring

    - by ML
    I am putting a new motherboard in a chenbro chasis and I dont get how to plugin the wires for powerSW resetSW, etc. It is a SuperMicro P4DP6 motherboard. ** I cant post an image yet, but here is a long to the spot on the mobo where this goes: http://andrewslack.info/mobo.png The powerSW lead is a green and white wire. I have the wire for PowerSW in place as the white wire ground and I have tried the reverse even (green to ground). The wire is covering Pin 1 and 2 in the diagram And I press the power button on the machine and nothing happens. It worked before I replaced the motherboard, the 24-pin ATX power leas is connected as well as the 2dn 6-pin optional power. Thoughts?

    Read the article

  • PHP GD Text Transparency..

    - by Deagle
    Hello, I can't slove this. I'm trying to make a text transparency but doesn't work.. Here how it looks: qshort.com/userbar/gd.php Here how if possible to show with transparency: qshort.com/userbar/transparent.png Is that possible? Here my PHP Code: <?php header('Content-type: image/png'); $im = imagecreatefrompng("signature.png"); $white = imagecolorallocate($im, 255, 255, 255); $grey = imagecolorallocate($im, 114, 114, 114); $black = imagecolorallocate($im, 0, 0, 0); $tr = imagecolorallocatealpha($im, 255, 255, 255, 20); $trg = imagecolorallocatealpha($im, 114, 114, 114, 50); $font = 'TCCB.TTF'; $mtext="Money: $0"; $mx="261"; $my="80"; $ms="16"; imagettftext($im, $ms, 0, $mx+1, $my, $grey, $font, $mtext); imagettftext($im, $ms, 0, $mx-1, $my, $grey, $font, $mtext); imagettftext($im, $ms, 0, $mx, $my+1, $grey, $font, $mtext); imagettftext($im, $ms, 0, $mx, $my-1, $grey, $font, $mtext); imagettftext($im, $ms, 0, $mx, $my, $white, $font, $mtext); $atext="Score: 0"; $ax="261"; $ay="100"; $as="16"; imagettftext($im, $as, 0, $ax+1, $ay, $grey, $font, $atext); imagettftext($im, $as, 0, $ax-1, $ay, $grey, $font, $atext); imagettftext($im, $as, 0, $ax, $ay+1, $grey, $font, $atext); imagettftext($im, $as, 0, $ax, $ay-1, $grey, $font, $atext); imagettftext($im, $as, 0, $ax, $ay, $white, $font, $atext); $ctext="Properties: 0"; $cx="261"; $cy="120"; $cs="16"; imagettftext($im, $cs, 0, $cx+1, $cy, $grey, $font, $ctext); imagettftext($im, $cs, 0, $cx-1, $cy, $grey, $font, $ctext); imagettftext($im, $cs, 0, $cx, $cy+1, $grey, $font, $ctext); imagettftext($im, $cs, 0, $cx, $cy-1, $grey, $font, $ctext); imagettftext($im, $cs, 0, $cx, $cy, $white, $font, $ctext); $ntext="Nickname"; $nx="20"; $ny="45"; $ns="35"; imagettftext($im, $ns, 0, $nx+1, $ny, $trg, $font, $ntext); imagettftext($im, $ns, 0, $nx-1, $ny, $trg, $font, $ntext); imagettftext($im, $ns, 0, $nx, $ny+1, $trg, $font, $ntext); imagettftext($im, $ns, 0, $nx, $ny-1, $trg, $font, $ntext); imagettftext($im, $ns, 0, $nx, $ny, $tr, $font, $ntext); imagepng($im); imagedestroy($im); ?> Thanks, Waiting for answer.

    Read the article

  • SQL Server: SELECT rows with MAX(Column A), MAX(Column B), DISTINCT by related columns

    - by z531
    Scenario: Table A MasterID, Added Date, Added By, Updated Date, Updated By, 1, 1/1/2010, 'Fred', null, null 2, 1/2/2010, 'Barney', 'Mr. Slate', 1/7/2010 3, 1/3/2010, 'Noname', null, null Table B MasterID, Added Date, Added By, Updated Date, Updated By, 1, 1/3/2010, 'Wilma', 'The Great Kazoo', 1/5/2010 2, 1/4/2010, 'Betty', 'Dino', 1/4/2010 Table C MasterID, Added Date, Added By, Updated Date, Updated By, 1, 1/5/2010, 'Pebbles', null, null 2, 1/6/2010, 'BamBam', null, null Table D MasterID, Added Date, Added By, Updated Date, Updated By, 1, 1/2/2010, 'Noname', null, null 3, 1/4/2010, 'Wilma', null, null I need to return the max added date and corresponding user, and max updated date and corresponding user for each distinct record when tables A,B,C&D are UNION'ed, i.e.: 1, 1/5/2010, 'Pebbles', 'The Great Kazoo', 1/5/2010 2, 1/6/2010, 'BamBam', 'Mr. Slate', 1/7/2010 3, 1/4/2010, 'Wilma', null, null I know how to do this with one date/user per row, but with two is beyond me. DBMS is SQL Server 2005. T-SQL solution preferred. Thanks in advance, Dave

    Read the article

  • Adding Windows 7 to grub4dos menu.lst

    - by antonio
    I am trying to create a multiboot USB drive with grub4dos. I started with a working bootable WinPE-like USB drive, based on Windows 7. I modified the drive MBR with grubinst.exe (hd1), copied in its root grldr and the menu menu.lst file: color blue/green yellow/red white/magenta white/magenta timeout 30 default 0 title Win 7 test rootnoverify (hd0, 0) chainloader /bootmgr I get the error: Try (hd0, 0). This partition is ntfs but with unknown boot record Try (hd0, 1) ... ... Cannot find GRLDR. If I hit a key, anyway it boots Windows 7. I would like to drop to the GRUB command shell, but when I hit "c" Grub boots into Windows.

    Read the article

  • !! 0xc01a00d !! aka Vista won't boot

    - by Chris
    Answer: Parts of the hard drive are corrupted. All of my user's code was checked in, so I'm just going to format the box. One of my users has an HP DV5-1235dx laptop running Windows Vista Professional x64. Last night, our WSUS server pushed out a few updates including "Security Update for Windows Vista for x64-based Systems (KB960859)". When we try to boot the laptop today, a black screen with white text comes up displaying: xxx/169894 (something) Where xxx increments rapidly and something is some dll or registry key. Eventually that stops and the screen displays !! 0xc01a00d !! 35566/169894 (\Registry\Machine\COMPONENTS\DerivedDat...) No other computers that received this update are displaying the same error. So far I've tried running CHKDSK off of HBCD. It repaired a thing or two, but the computer still doesn't boot. I tried repairing the Windows install from the Vista CD, but I get a black screen with white text displaying something along the lines of: 0 No Emulation System Type 00 1 No Emulation System Type 00 Select one of the above Booting in Last Known Good Configuration doesn't work. Booting in Safe Mode freezes at Loading Windows Files [snip] Loaded: \windows\system32\drivers\crcdisk.sys Please wait... My next step is trying to boot Safe Mode with Command Prompt and try to run rstrui.exe. While I do that, does anybody have any guidance? Edit: Booting into Safe Mode with Command Prompt will not work. See Booting in Safe Mode above. Edit 2: I managed to boot from the Vista DVD. I ran the system repair, and now I get a black screen with white text saying: !! 0xc0000034 !! 290/169894 (_0000000000000000.cdf-ms) Edit 3: I ran the system repair again, and it attempted to repair my hard drive. It failed. Problem Signature: Problem Event Name: Startup Repair V2 Problem Signature 01: External Media Problem Signature 02: 6.0.6001.18000.6.0.6001.18000 Problem Signature 03: 4 Problem Signature 04: 196611 Problem Signature 05: CorruptVolume Problem Signature 06: NoBootFailure Problem Signature 07: 0 Problem Signature 08: 0 Problem Signature 09: unknown Problem Signature 10: 1168 OS Version: 6.0.6002.2.2.0.256.1 Locale ID: 1033 Answer: Parts of the hard drive are corrupted. All of my user's code was checked in, so I'm just going to format the box.

    Read the article

  • Configuring TMUX's status bar

    - by wdkrnls
    I want my tmux session to show my current ip address in the right hand side of the status bar but I am having the hardest time figuring up the right syntax. The command works perfectly in the shell, but tmux won't parse it. set -g status-right '#[fg=white]#(host (hostname))' [Note: I am using the fish shell] I really want it to be: set -g status-right '#[fg=white]#(hostname)@#(host (hostname) | cut -d " " -f 4)' But since I can't get the former status bar to work, this is a lost cause. The weird thing is I got the first one to work once, but then I added the cut.

    Read the article

  • Hidden Field asp.net

    - by user329419
    I want to hide columns in asp.net in GridView then access the values in GridViewSelectIndexChanged using vb.net. I am using hidden fields in the GridView. When I try to access gives me an error object reference not set to an instance here is the code <asp:GridView ID="GridView1" runat="server" OnSorting="GridView1_OnSorting" AllowPaging="True" AllowSorting="True" AutoGenerateColumns="False" BorderStyle="Outset" CellPadding="4" DataSourceID="odsA02_Tracking" ForeColor="#333333" GridLines="Vertical" Style="border-right: #0000ff thin solid; table-layout: auto; border-top: #0000ff thin solid; font-size: x-small; border-left: #0000ff thin solid; border-bottom: #0000ff thin solid; font-family: Arial; border-collapse: separate" Font-Size="Small" PageSize="30"> <FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" /> <RowStyle BackColor="#EFF3FB" /> <EditRowStyle BackColor="#2461BF" /> <SelectedRowStyle BackColor="#D1DDF1" Font-Bold="True" ForeColor="#333333" /> <PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" /> <HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" /> <AlternatingRowStyle BackColor="White" /> <Columns> <asp:CommandField ShowSelectButton="True" /> <asp:boundfield datafield="Since" HeaderText="Submit Date" ReadOnly=true SortExpression="Since" /> <asp:BoundField DataField="Started_By" HeaderText="Submitted By" SortExpression="Started_By" /> <asp:BoundField DataField="Client_FullName" HeaderText="Client Name" ReadOnly="True" SortExpression="Client_FullName" /> <asp:BoundField DataField="Product_Desc" HeaderText="Product" ReadOnly="True" SortExpression="Product_Desc" /> <asp:BoundField DataField="Branch_List" HeaderText="Branch" ReadOnly="True" SortExpression="Branch_List" /> <asp:BoundField DataField="Event_AssignedID" HeaderText="Assigned To" ReadOnly="True" SortExpression="Event_AssignedID" /> <asp:BoundField DataField="DaysElapsed" HeaderText="Days Open" ReadOnly="True" SortExpression="DaysElapsed" /> <asp:BoundField DataField="Status" HeaderText="Status" SortExpression="Status" /> <asp:TemplateField HeaderText=Instance_ID > <ItemTemplate> <asp:HiddenField ID=lblInstanceID Value='<%#Eval("Instance_ID") %>' runat=server> </asp:HiddenField> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText=Seq_ID> <ItemTemplate> <asp:HiddenField ID=lblSeqID Value='<%#Eval("Seq_ID") %>' runat=server/> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText=Form_Code> <ItemTemplate> <asp:HiddenField ID=lblFormCode Value='<%#Eval("Form_Code") %>' runat=server/> </ItemTemplate> </asp:TemplateField> </Columns> </asp:GridView> Protected Sub GridView1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles GridView1.SelectedIndexChanged Dim Instance_ID As String Dim Seq_ID As String Dim Form_Code As String Dim PARMS As String Dim DestinationURL As String Dim DestinationParms As String Dim instanceID As String = CType(GridView1.FindControl("lblInstanceID"), HiddenField).Value End sub

    Read the article

  • Chaotic behavior of a dead pixel on my iMac 24"

    - by Vincent Robert
    Since I bought my iMac last year, I have a white pixel on the left of my screen. I'm ok with that, one pixel is not much and I know about dead pixels policies. My problem is about understanding this "dead" pixel. But this pixel has a strange behavior. At first, it seems to be always white, but it is actually working ok under certain conditions: the mouse pointer a contextual menu Dock icons a QuickLooks video played in fullscreen other spaces than "1" The "QuickLooks fullscreen video" and "other spaces" are the one that disturb me the most. In these modes, my pixel is working fine, so it must be a software problem since my pixel is working correctly in those modes. Any ideas?

    Read the article

  • Trying to speed up a SQLITE UNION QUERY

    - by user142683
    I have the below SQLITE code SELECT x.t, CASE WHEN S.Status='A' AND M.Nomorebets=0 THEN S.PriceText ELSE '-' END AS Show_Price FROM sb_Market M LEFT OUTER JOIN (select 2010 t union select 2020 t union select 2030 t union select 2040 t union select 2050 t union select 2060 t union select 2070 t ) as x LEFT OUTER JOIN sb_Selection S ON S.MeetingId=M.MeetingId AND S.EventId=M.EventId AND S.MarketId=M.MarketId AND x.t=S.team WHERE M.meetingid=8051 AND M.eventid=3 AND M.Name='Correct Score' With the current interface restrictions, I have to use the above code to ensure that if one selection is missing, that a '-' appears. Some feed would be something like the following SelectionId Name Team Status PriceText =================================== 1 Barney 2010 A 10 2 Jim 2020 A 5 3 Matt 2030 A 6 4 John 2040 A 8 5 Paul 2050 A 15/2 6 Frank 2060 S 10/11 7 Tom 2070 A 15 Is using the above SQL code the quickest & efficient?? Please advise of anything that could help. Messages with updates would be preferable.

    Read the article

  • Setting up a proxy for FTP - Windows

    - by RadiantHex
    Hi folks, I have 2 windows machines and a server. 1 is my laptop, the other is a workstation that the IP of which is white-listed on the server. The laptop has a dynamic IP, so the IP cannot be white-listed. I would like to be able to perform FTP transfers from my laptop to the server, while using the workstation as a proxy. Both machines are using Windows 7. Is this possible? Help would be amazing!

    Read the article

  • Posting data from multiple servers routing through one server to client server

    - by Swaroop Kundeti
    I have 5 webservers behind Load balancer and we have a client server at other end. Client has white listed my 5 webserver public ip so that my webservers will post a file to the client server. Here the problem is my webservers is going to increase and i cannot always ask client to make my new webserver ip's white list. So i would like to make my infra this way, my webservers will post data to the client server routing from a single server. Like assume that web-1 is main server and the remaining 4 web servers will post data to client server routing through main web-1. I was told that this can be achieved by doing IP Tunneling. But i have no idea how to do that. Would be great for any kind of help.

    Read the article

  • Windows XP problems displaying internet browser backgrounds correctly

    - by Samurai Waffle
    My friend has a Windows XP computer that doesn't show the colored background on pages, it's always white. On top of that some pictures won't show up, there will just be an empty white frame. Also when you left click on a folder, instead of opening it up, it opens up a new window that turns out to be the search results window. I've never heard of these problems before, and I can't find any information on the internet about it. I assume it's a virus deeply imbedded into the system, but no virus scanner has found it. Thanks for the help!

    Read the article

  • Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubu

    - by user37968
    I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

    Read the article

  • Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubuntu Lucid

    - by MIDoubleKO
    I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

    Read the article

  • Change desktop background at school

    - by Nano8Blazex
    On school computers, I can log in with a user account stored on the school network (something like that, I have no experience in networking and this sort of stuff). Everything is fine and dandy and totally works as it should, but there is one thing that I find annoying. Apparently for some reason I can't change my background to anything more than a couple of different solid colors with our school's logo still stuck in the middle. (the original background is a white logo on black background. If I change it to a different color, the central 6x6 inch black/white logo still remains, only the surrounding color is changed.) It may have been set by school administrators or something, I don't really know. I find this really ugly. Is there any way to change a setting so that I can set the background to any picture I wish? (like on a home pc...) Thanks.

    Read the article

  • Use Adblock to allow most ads on a site

    - by jrob
    I leave Adblock turned on for all sites by default. I allow ads on some sites. You can do this by adding an exception for a site that is allowed to show ads. This puts a site in the white list. However, I do not know how to allow most ads on a page, but block a specific ad. I am not even sure Adblock will do this. I believe it is all or none. If a site is in the white list, it appears that all other rules are ignored. Is there a way to allow most ads on a website, but still block specific ads?

    Read the article

  • How to convert poor quality bitmap image to vector?

    - by Macha
    I'm designing a website for a group which has lost the original digital image for their logo. The only file they have of it is a jpg which was embedded into a word document. The image has everything possible wrong with it: Anti-aliased onto a white background where it should be transparent Image artefacts Resized downwards poorly. Lines that should be straight and solid aren't. I've currently used the wand tool to get rid of the white background, and stuck it on the website, but it's poor quality makes it stick out like a sore thumb. I need a few different sizes of it to use, so how would I go about creating a vector image based on it?

    Read the article

  • Cropping a PDF File's Margin During Printing

    - by JavaMan
    I'm using the free Acrobat Reader to print out some pdf documents having very large top/bottom/left/right margins. I want to remove the margins (which are wasting too much space and making the fonts too small). I used to use Acrobat (the paid version having edit features) to crop the src pdf file manually. But since it is an old version it does not support new pdf format and I don't want to upgrade for such a simple use. Is there any free way to crop/remove unwanted white margins from the printed pdf? I am thinking to print the pdf files to a PDF Printer like the Bullzip PDF Printer and enlarge the output file manually so as to remove any white margin. But there does not seem to be such a feature in Bullzip PDF Printer. Is there any other virtual printer software that can be used for this purpose?

    Read the article

  • Random users randomly being unable to connect to my static content domain

    - by jls33fsls
    I store all of my images, js, and css files on a separate domain to try and speed up page load times (it isn't a CDN, just a separate domain on the same server). This works fine for 99% of the users, 99% of the time. However, there are users that randomly are unable to connect to the static content domain for periods of 1-5 hours. They can go to the main site, but no images will load and everything is just white because no css is being loaded. If they go to the static content domain itself, the page just idles for a while and then times out with a blank white page, no error messages. I have no idea what could be causing this, and it hasn't happened to me, any ideas? I am running Apache on CentOS 5.5.

    Read the article

  • Table header is not shown

    - by Vivien
    My error is that the table headers of my two tables are not shown. Right now I am setting the header with new JTable(data, columnNames). Here is an example which shows, my problem: public class Test extends JFrame { private static final long serialVersionUID = -4682396888922360841L; private JMenuBar menuBar; private JMenu mAbout; private JMenu mMain; private JTabbedPane tabbedPane; public SettingsTab settings = new SettingsTab(); private void addMenuBar() { menuBar = new JMenuBar(); mMain = new JMenu("Main"); mAbout = new JMenu("About"); menuBar.add(mMain); menuBar.add(mAbout); setJMenuBar(menuBar); } public void createTabBar() { tabbedPane = new JTabbedPane(JTabbedPane.TOP); tabbedPane.addTab("Settings", settings.createLayout()); add(tabbedPane); tabbedPane.setTabLayoutPolicy(JTabbedPane.SCROLL_TAB_LAYOUT); } private void makeLayout() { setTitle("Test"); setLayout(new BorderLayout()); setPreferredSize(new Dimension(1000, 500)); addMenuBar(); createTabBar(); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); pack(); setVisible(true); } public void start() { javax.swing.SwingUtilities.invokeLater(new Runnable() { public void run() { makeLayout(); } }); } public static void main(String[] args) { Test gui = new Test(); gui.start(); } public class SettingsTab extends JPanel { public JScrollPane createLayout() { JPanel panel = new JPanel(new MigLayout("")); JScrollPane sp = new JScrollPane(panel); sp.setVerticalScrollBarPolicy(ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS); panel.add(table1(), "growx, wrap"); panel.add(Box.createRigidArea(new Dimension(0,10))); panel.add(table2()); // panel.add(Box.createRigidArea(new Dimension(0,10))); return sp; } public JPanel table1() { JPanel panel1 = new JPanel(); String[] columnNames = {"First Name", "Last Name"}; Object[][] data = { {"Kathy", "Smith"}, {"John", "Doe"}, {"Sue", "Black"}, {"Jane", "White"}, {"Joe", "Brown"}, {"John", "Doe"}, {"Sue", "Black"}, {"Jane", "White"}, {"Joe", "Brown"} }; final JTable table = new JTable(data, columnNames); tableProperties(table); panel1.add(table); panel1.setLayout(new BoxLayout(panel1, BoxLayout.Y_AXIS)); return panel1; } public JPanel table2() { JPanel panel1 = new JPanel(); String[] columnNames = {"First Name", "Last Name"}; Object[][] data = { {"Kathy", "Smith"}, {"John", "Doe"}, {"Sue", "Black"}, {"Jane", "White"}, {"Joe", "Brown"}, {"John", "Doe"}, {"Sue", "Black"}, {"Jane", "White"}, {"Joe", "Brown"} }; final JTable table = new JTable(data, columnNames); table.setPreferredScrollableViewportSize(new Dimension(500, 70)); table.setFillsViewportHeight(true); tableProperties(table); panel1.add(table); panel1.setLayout(new BoxLayout(panel1, BoxLayout.Y_AXIS)); return panel1; } public void tableProperties(JTable table) { table.setAutoResizeMode(JTable.AUTO_RESIZE_ALL_COLUMNS); table.repaint(); table.revalidate(); } } } Any recommendations what I am doing wrong?

    Read the article

  • 3 wire computer fan won't run continuously

    - by Ben
    I had an old computer that didn't work anymore, so I took the CPU fan out to see what I could make with it. The fan is NMB model number BG0903-B044-VTL, like this. It has three wires coming off of it, red, black, and white. I know that the white wire is usually a speed sensor. Does this wire need to be connected to something in order for the fan to run continuously? Right now when I apply power to the red and black wires (from a 9-volt battery) the fan will spin very briefly, and then slow down until it stops. The fan's motor only spins in the instant that the power is turned on, but doesn't continue, even though the power is still applied. How can I get the fan to spin continuously?

    Read the article

  • ASP.NET - Call required field validator before AJAX modalpopup, client side

    - by odinel
    I have an ASP.NET/C# application. The user fills out a form with required fields, then clicks a submit button. An AJAX popup message is then displayed, and if they confirm, their information is posted back to the server. The problem is that the AJAX popup is fired BEFORE the req validator. I need to interrupt this and run the req validator, and then if successful show the popup. I know the req validator is working, because if you cancel the popup message, the req text is shown next to the fields. Textbox and AJAX control code is here: <table> <tr> <td>Name</td> <td> <asp:TextBox ID="txtName" runat="server" CssClass="textBox" AutoPostBack="true"></asp:TextBox> <asp:RequiredFieldValidator ID="reqName" runat="server" Text="*" ControlToValidate="txtName" ValidationGroup="trade" ForeColor="White"></asp:RequiredFieldValidator> </td> </tr> <tr> <td>Address</td> <td> <asp:TextBox ID="txtAdd1" runat="server" CssClass="textBox"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" Text="*" ControlToValidate="txtAdd1" ValidationGroup="trade" ForeColor="White"></asp:RequiredFieldValidator> </td> </tr> <tr> <td></td> <td> <asp:Button ID="btnSubmitEnquiry" runat="server" CssClass="buttonText" Text="Submit Enquiry" ValidationGroup="trade" /> </td> </tr> </table> <ajax:ModalPopupExtender ID="ModalPopupExtender1" runat="server" okcontrolid="lnkCancel" targetcontrolid="btnSubmitEnquiry" popupcontrolid="pnlConfirm" popupdraghandlecontrolid="PopupHeader" drag="true" ></ajax:ModalPopupExtender> <asp:Button Text="targetbutton" ID="btnConfTgt" runat="server" Style="display: none" /> <asp:Panel ID="pnlConfirm" style="display:none" runat="server"> <div class="PopupContainer"> <div class="PopupBody"> <br /> <div align="center"> <asp:label ID="Label1" runat="server" CssClass="lblConfirmpopup"> Message goes here </asp:label> </div> <br /><br /><br /> <div align="center"> <asp:LinkButton ID="lnkCancel" runat="server" visible="true" Text="Cancel" CommandName="Update" BorderColor="#FFFFFF" BackColor="#000000" BorderWidth="3" BorderStyle="Double" ForeColor="White" Font-Size="13pt" Font-Underline="False"></asp:LinkButton> <asp:LinkButton ID="lnkConfirm" runat="server" visible="true" Text="Submit Enquiry" CommandName="Update" BorderColor="#FFFFFF" BackColor="#000000" BorderWidth="3" BorderStyle="Double" ForeColor="White" Font-Size="13pt" Font-Underline="False" OnClick="btnSubmitEnquiry_Click"></asp:LinkButton> </div> </div> </div> </asp:Panel> I've tried coding the first submit button to call the client-side req validator method, but no joy; it still shows the popup before the req validator. If there's no simple solution, I was thinking of perhaps an 'outside the box' solution, maybe hiding the initial Submit button after the req validation has passed, then showing an additional button with the popup control attached to it. Not sure how I'd be able to achieve this though. Thanks

    Read the article

  • On Windows 7, how do I fix my cmd.exe icon and remove cruft from the jumplist

    - by sb3700
    Hi. When installing drivers for my Gigabyte motherboard, I installed a "Games" link which ran from a batch file. This was pinned to the taskbar by default. As a result, it changed the icon for cmd.exe to the icon for Games. I uninstalled the Games and it got rid of the icon leaving it with a white rectangle thing (I can post screenshots on request). There is also a link on the jumplist to open Games, which just opens a cmd window. I've tried rebuilding my icon cache as per Changing Windows 7 pinned taskbar icons, but this only removed the white rectangle icon, leaving me with no real icon. c:\windows\system32\cmd.exe still has the appropriate icon in explorer, just not on the taskbar. Any ideas on how to fix this annoyance?

    Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >