Search Results

Search found 1655 results on 67 pages for 'detection'.

Page 40/67 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• Virtual PC on Windows 7 - Hardware-assisted virtualization is disabled

  - by DLux

  I am running a Lenovo Thinkpad T61 with an Intel Core 2 Duo T7300 processor. When I run Virtual PC in Windows 7, I get the following error: Unable to start Windows Virtual PC because hardware-assisted virtualization is disabled. When running the Hardware-Assisted Virtualization Detection Tool from Microsoft says: Hardware-assited virtualization is not enabled on this computer. Now, in the BIOS, I do have virtualization enabled and according to Intel this processor supports Intel-VT. What am I missing here?

  Read the article

• Creating static NAT blocks outbound traffic Cisco ASA

  - by natediggs

  Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

  Read the article

• Configure BL-C111A IP Camera

  - by csmba

  I am an ATT DSL customer. I want the camera to send an email when motion detection is triggered. Can anyone tell me how he managed to do that using: GMail (I cannot because I don't think it supports SSL) other alternatives if GMail is not supported

  Read the article

• Windows 7 SP1 not being offered on Windows Update

  - by Ian Boyd

  i have no option to install Windows 7 Service Pack 1 (SP1) on my computer. Why is the option to install Windows 7 SP1 missing from Windows Update? i'm less interested in why the option is missing, and more interested in how to diagnose why the option to install Windows 7 SP1 is being hidden. Following the suggestions in KB2498452 - You do not have the option of downloading Windows 7 SP1 when you use Windows Update to check for updates: Confirm that Windows 7 SP1 is not already installed and that you are not running a prerelease version of Windows 7 SP1 i am not already running SP1, or a pre-release SP1: Check for pending updates Update 976902 may have to be installed on your computer before Windows 7 SP1 will be offered in Windows Update. i already have 976902 installed: Verify that an incompatible version of SafeCentral is not installed on your computer Windows SP1 may not appear in Windows Update if certain versions of SafeCentral are installed on your computer. SafeCentral is a security program that is manufactured by SafeCentral, Inc. i do not have SafeCentral installed (i've never heard of such a thing): Check whether you have Intel integrated graphics driver Igdkmd32.sys or Igdkmd64.sys and whether you upgraded the driver i do not have an Intel GMA: Make sure that you did not use vLite to customize your Windows 7 installation i did not use vLite to customize my Windows 7 installation. Again, i've never heard of such a thing. Update One: Here's proof that i've checked for updates "today" (3/2/2011): And that i'm not being presented the option of installing SP1 (i dispatched an update to Silverlight and a fix for IE9 being hosted in a Direct2D or Direct3D application; so updates themselves do work): Update Two Tried the Windows Update Troubleshooter: Window 7 Service Pack 1 is still not available. Update Three Here is the tail end of windowsupdate.log. It speaks of Evaluating application rules: Found 2 updates and 65 categories in search; evaluated appl. rules of 1324 out of 1832 deployed entities These must be the rules that say i'm not allowed to see SP1: 2011-03-03 09:21:08:091 924 db4 AU Triggering AU detection through DetectNow API 2011-03-03 09:21:08:091 924 db4 AU Triggering Online detection (interactive) 2011-03-03 09:21:08:091 924 950 AU ############# 2011-03-03 09:21:08:092 924 950 AU ## START ## AU: Search for updates 2011-03-03 09:21:08:092 924 950 AU ######### 2011-03-03 09:21:08:093 924 950 AU <<## SUBMITTED ## AU: Search for updates [CallId = {8517376A-B8A3-488B-B4D4-67DFC75788C8}] 2011-03-03 09:21:08:093 924 ca8 Agent ************* 2011-03-03 09:21:08:093 924 ca8 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2011-03-03 09:21:08:093 924 ca8 Agent ********* 2011-03-03 09:21:08:093 924 ca8 Agent * Online = Yes; Ignore download priority = No 2011-03-03 09:21:08:093 924 ca8 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1" 2011-03-03 09:21:08:093 924 ca8 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service 2011-03-03 09:21:08:093 924 ca8 Agent * Search Scope = {Machine} 2011-03-03 09:21:08:094 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2011-03-03 09:21:08:097 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:287 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2011-03-03 09:21:08:289 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:292 924 ca8 Agent Checking for updated auth cab for service 7971f918-a847-4430-9279-4a52d1efe18d at http://download.windowsupdate.com/v9/microsoftupdate/redir/muauth.cab 2011-03-03 09:21:08:292 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab: 2011-03-03 09:21:08:294 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:354 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab: 2011-03-03 09:21:08:356 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:356 924 ca8 Setup Checking for agent SelfUpdate 2011-03-03 09:21:08:356 924 ca8 Setup Client version: Core: 7.3.7600.16385 Aux: 7.3.7600.16385 2011-03-03 09:21:08:357 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2011-03-03 09:21:08:359 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:418 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2011-03-03 09:21:08:420 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:422 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab: 2011-03-03 09:21:08:424 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:655 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab: 2011-03-03 09:21:08:658 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:659 924 ca8 Setup Skipping SelfUpdate check based on the /SKIP directive in wuident 2011-03-03 09:21:08:659 924 ca8 Setup SelfUpdate check completed. SelfUpdate is NOT required. 2011-03-03 09:21:08:808 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2011-03-03 09:21:08:810 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:872 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2011-03-03 09:21:08:874 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:876 924 ca8 PT +++++++++++ PT: Synchronizing server updates +++++++++++ 2011-03-03 09:21:08:877 924 ca8 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx 2011-03-03 09:21:13:958 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2011-03-03 09:21:13:960 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:14:083 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2011-03-03 09:21:14:085 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:14:087 924 ca8 PT +++++++++++ PT: Synchronizing extended update info +++++++++++ 2011-03-03 09:21:14:087 924 ca8 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx 2011-03-03 09:21:14:395 924 ca8 Agent * Added update {414642E2-5F20-4AD1-AA5A-773061238B5F}.101 to search result 2011-03-03 09:21:14:395 924 ca8 Agent * Added update {56D5FC3D-9AC8-44F1-A248-8C397A24D02F}.100 to search result 2011-03-03 09:21:14:395 924 ca8 Agent * Found 2 updates and 65 categories in search; evaluated appl. rules of 1324 out of 1832 deployed entities 2011-03-03 09:21:14:396 924 ca8 Agent ********* 2011-03-03 09:21:14:396 924 ca8 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates] 2011-03-03 09:21:14:396 924 ca8 Agent ************* 2011-03-03 09:21:14:404 924 ce0 AU >>## RESUMED ## AU: Search for updates [CallId = {8517376A-B8A3-488B-B4D4-67DFC75788C8}] 2011-03-03 09:21:14:404 924 ce0 AU # 2 updates detected 2011-03-03 09:21:14:404 924 ce0 AU ######### 2011-03-03 09:21:14:404 924 ce0 AU ## END ## AU: Search for updates [CallId = {8517376A-B8A3-488B-B4D4-67DFC75788C8}] 2011-03-03 09:21:14:404 924 ce0 AU ############# 2011-03-03 09:21:14:404 924 ce0 AU Successfully wrote event for AU health state:0 2011-03-03 09:21:14:405 924 ce0 AU ############# 2011-03-03 09:21:14:405 924 ce0 AU ## START ## AU: Refresh featured updates info 2011-03-03 09:21:14:405 924 ce0 AU ######### 2011-03-03 09:21:14:405 924 ce0 AU No featured updates available. 2011-03-03 09:21:14:405 924 ce0 AU ######### 2011-03-03 09:21:14:405 924 ce0 AU ## END ## AU: Refresh featured updates info 2011-03-03 09:21:14:405 924 ce0 AU ############# 2011-03-03 09:21:14:405 924 ce0 AU No featured updates notifications to show 2011-03-03 09:21:14:405 924 ce0 AU AU setting next detection timeout to 2011-03-04 08:03:53 2011-03-03 09:21:14:405 924 ce0 AU Setting AU scheduled install time to 2011-03-04 08:00:00 2011-03-03 09:21:14:405 924 ce0 AU Successfully wrote event for AU health state:0 2011-03-03 09:21:14:406 924 ce0 AU Successfully wrote event for AU health state:0 2011-03-03 09:21:14:407 924 db4 AU Getting featured update notifications. fIncludeDismissed = true 2011-03-03 09:21:14:408 924 db4 AU No featured updates available. 2011-03-03 09:21:19:396 924 ca8 Report REPORT EVENT: {633538B3-030E-4CAD-BE6B-33C6ED65AFF1} 2011-03-03 09:21:14:395-0500 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 2 updates. 2011-03-03 09:21:19:396 924 ca8 Report CWERReporter finishing event handling. (00000000) i'm less interested in why the option to install Windows 7 SP1 is missing, and more interested in how to diagnose why the option to install Windows 7 SP1 is being hidden. The KB article says that SP1 will not be offered if your machine doesn't meet some secret special criteria. How can i discover what that secret criteria is? i presume it is logged somewhere. Nor am i particularly interested in a direct download link. i want to learn here. i want to be able to diagnose (i.e. in the future) why an update is not being offered. i'm a superuser here. Rather than others coming up with a checklist of things to try, i want to be able to come up with the checklist.

  Read the article

• Windows 7: Computer does not enter automatic standby

  - by heinzi

  My Windows 7 PC is set to automatically enter standby ("sleep mode") after 30 minutes. For some reason it stopped working a few days ago (it keeps on running). Is there some systematic way to determine what is preventing the system from automatically entering sleep mode after the designated idle time? Manually sending the machine to sleep works fine. The monitor also enters power save mode automatically, so the "idling detection" of Windows seems to work fine.

  Read the article

• CSMA/CD and CSMA/CA

  - by Zia ur Rahman

  CSMA/CD is used in wired LANs, CSMA means that the computers on the network sense the medium if the medium is idle, the computer transmits otherwise it defers sending.CD refers to collision detection. I don’t want to write about CD because its not related to my Question. Now in case of wireless LANs we use CSMA/CA , here CSMA refers to carrier sensing , the Question is how carrier sensing is done in case of wireless LANs? the collision avoidance is done by sending the control message to the intended receipient.

  Read the article

• AD GIT SELinux RHEL 6 : Can not get SELinux to allow connetion to git

  - by Johan Sörell

  I have a problem with SELinux! I have installed git on Red Hat Enterprise 6 with AD group control and SSL Cert . Everything works fine if I do setenforce 0 ( set SELinux in detection only mode ) or if I do semanage permissive -a httpd_t (Set httpd_t in detection only mode) I do not want to use this on my git production server. Is there anyone out there who can help we with SELinux? Below is some info that you might need to be able to help me: All help I can get would be apriciated: This is the output of ls -lZa /preproduction/git/repositories/ ls -lZa /preproduction/git/repositories/ drwxr-xr-x. apache apache unconfined_u:object_r:httpd_sys_rw_content_t:s0 . drwxr-xr-x. apache apache unconfined_u:object_r:file_t:s0 .. drwxr-xr-x. apache apache unconfined_u:object_r:httpd_sys_rw_content_t:s0 playground drwxr-xr-x. apache apache unconfined_u:object_r:httpd_sys_rw_content_t:s0 shamrock.git drwxr-xr-x. apache apache unconfined_u:object_r:httpd_sys_rw_content_t:s0 test Here is the out put of getsebool -a |grep -i httpd getsebool -a |grep -i httpd allow_httpd_anon_write --> off allow_httpd_mod_auth_ntlm_winbind --> off allow_httpd_mod_auth_pam --> off allow_httpd_sys_script_anon_write --> off httpd_builtin_scripting --> on httpd_can_check_spam --> off httpd_can_network_connect --> off httpd_can_network_connect_cobbler --> off httpd_can_network_connect_db --> off httpd_can_network_memcache --> off httpd_can_network_relay --> off httpd_can_sendmail --> off httpd_dbus_avahi --> on httpd_enable_cgi --> on httpd_enable_ftp_server --> off httpd_enable_homedirs --> off httpd_execmem --> off httpd_read_user_content --> off httpd_setrlimit --> off httpd_ssi_exec --> off httpd_tmp_exec --> off httpd_tty_comm --> on httpd_unified --> on httpd_use_cifs --> off httpd_use_gpg --> off httpd_use_nfs --> off Tis is the status of : sestatus sestatus SELinux status: enabled SELinuxfs mount: /selinux Current mode: enforcing Mode from config file: enforcing Policy version: 24 Policy from config file: targeted

  Read the article

• Cisco ASA: Allowing and Denying VPN Access based on membership to an AD group

  - by milkandtang

  I have a Cisco ASA 5505 connecting to an Active Directory server for VPN authentication. Usually we'd restrict this to a particular OU, but in this case users which need access are spread across multiple OUs. So, I'd like to use a group to specify which users have remote access. I've created the group and added the users, but I'm having trouble figuring out how to deny users which aren't in that group. Right now, if someone connects they get assigned the correct group policy "companynamera" if they are in that group, so the LDAP mapping is working. However, users who are not in that group still authenticate fine, and their group policy becomes the LDAP path of their first group, i.e. CN=Domain Users,CN=Users,DC=example,DC=com, and then are still allowed access. How do I add a filter so that I can map everything that isn't "companynamera" to no access? Config I'm using (with some stuff such as ACLs and mappings removed, since they are just noise here): gateway# show run : Saved : ASA Version 8.2(1) ! hostname gateway domain-name corp.company-name.com enable password gDZcqZ.aUC9ML0jK encrypted passwd gDZcqZ.aUC9ML0jK encrypted names name 192.168.0.2 dc5 description FTP Server name 192.168.0.5 dc2 description Everything server name 192.168.0.6 dc4 description File Server name 192.168.0.7 ts1 description Light Use Terminal Server name 192.168.0.8 ts2 description Heavy Use Terminal Server name 4.4.4.82 primary-frontier name 5.5.5.26 primary-eschelon name 172.21.18.5 dmz1 description Kerio Mail Server and FTP Server name 4.4.4.84 ts-frontier name 4.4.4.85 vpn-frontier name 5.5.5.28 ts-eschelon name 5.5.5.29 vpn-eschelon name 5.5.5.27 email-eschelon name 4.4.4.83 guest-frontier name 4.4.4.86 email-frontier dns-guard ! interface Vlan1 nameif inside security-level 100 ip address 192.168.0.254 255.255.255.0 ! interface Vlan2 description Frontier FiOS nameif outside security-level 0 ip address primary-frontier 255.255.255.0 ! interface Vlan3 description Eschelon T1 nameif backup security-level 0 ip address primary-eschelon 255.255.255.248 ! interface Vlan4 nameif dmz security-level 50 ip address 172.21.18.254 255.255.255.0 ! interface Vlan5 nameif guest security-level 25 ip address 172.21.19.254 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 switchport access vlan 3 ! interface Ethernet0/2 switchport access vlan 4 ! interface Ethernet0/3 switchport access vlan 5 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone PST -8 clock summer-time PDT recurring dns domain-lookup inside dns server-group DefaultDNS name-server dc2 domain-name corp.company-name.com same-security-traffic permit intra-interface access-list companyname_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0 access-list companyname_splitTunnelAcl standard permit 172.21.18.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.20.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.18.0 255.255.255.0 access-list bypassingnat_dmz extended permit ip 172.21.18.0 255.255.255.0 192.168.0.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 12288 logging buffered warnings logging asdm notifications mtu inside 1500 mtu outside 1500 mtu backup 1500 mtu dmz 1500 mtu guest 1500 ip local pool VPNpool 172.21.20.50-172.21.20.59 mask 255.255.255.0 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface global (outside) 2 email-frontier global (outside) 3 guest-frontier global (backup) 1 interface global (dmz) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 2 dc5 255.255.255.255 nat (inside) 1 192.168.0.0 255.255.255.0 nat (dmz) 0 access-list bypassingnat_dmz nat (dmz) 2 dmz1 255.255.255.255 nat (dmz) 1 172.21.18.0 255.255.255.0 access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 4.4.4.1 1 track 1 route backup 0.0.0.0 0.0.0.0 5.5.5.25 254 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 ldap attribute-map RemoteAccessMap map-name memberOf IETF-Radius-Class map-value memberOf CN=RemoteAccess,CN=Users,DC=corp,DC=company-name,DC=com companynamera dynamic-access-policy-record DfltAccessPolicy aaa-server ActiveDirectory protocol ldap aaa-server ActiveDirectory (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft aaa-server ADRemoteAccess protocol ldap aaa-server ADRemoteAccess (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft ldap-attribute-map RemoteAccessMap aaa authentication enable console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart sla monitor 123 type echo protocol ipIcmpEcho 4.4.4.1 interface outside num-packets 3 frequency 10 sla monitor schedule 123 life forever start-time now crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 ! track 1 rtr 123 reachability telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 management-access inside dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy companynamera internal group-policy companynamera attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com group-policy companyname internal group-policy companyname attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com username admin password IhpSqtN210ZsNaH. encrypted privilege 15 tunnel-group companyname type remote-access tunnel-group companyname general-attributes address-pool VPNpool authentication-server-group ActiveDirectory LOCAL default-group-policy companyname tunnel-group companyname ipsec-attributes pre-shared-key * tunnel-group companynamera type remote-access tunnel-group companynamera general-attributes address-pool VPNpool authentication-server-group ADRemoteAccess LOCAL default-group-policy companynamera tunnel-group companynamera ipsec-attributes pre-shared-key * ! class-map type inspect ftp match-all ftp-inspection-map class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect ftp ftp-inspection-map parameters class ftp-inspection-map policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns migrated_dns_map_1 inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect ils inspect netbios inspect rsh inspect rtsp inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp inspect icmp inspect icmp error inspect esmtp inspect pptp ! service-policy global_policy global prompt hostname context Cryptochecksum:487525494a81c8176046fec475d17efe : end gateway# Thanks so much!

  Read the article

• Name the Late 1990s Era, Non-Signature-based, Israeli Antivirus Company/Product...

  - by Jess Sightler

  There was a computer security company back approximately 10 years ago marketing a non-signature based antivirus & intrusion detection software package for Windows. I cannot remember the name, and haven't had much luck with google searches to find it either. Can anyone remember the name of this product?

  Read the article

• Cisco ASA5505 8.2 Multiple Outside IP to Multiple Inside IP

  - by GriffJ

  Trying to setup ASA5505. Semi working but having issues with accessing services from the outside. ASA5505 Basic License, Version 8.2. (plus upgrade to unlimited inside hosts). Alert: I'm a Cisco Noob. 321.321.39.X is a place holder for privacy. I came up with this config and tested it tonight. ASA Version 8.2(1) ! hostname <removed> domain-name <removed> enable password <removed> encrypted passwd <removed> encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 172.21.36.1 255.255.252.0 ! interface Vlan2 nameif outside security-level 0 ip address 321.321.39.10 255.255.255.248 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name <removed> access-list outside_inbound extended permit tcp any host 321.321.39.10 eq pptp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq https access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 993 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq smtp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 1001 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 465 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq domain access-list outside_inbound extended permit udp any eq domain host 321.321.39.11 eq domain access-list outside_inbound extended permit tcp any host 321.321.39.12 eq www access-list outside_inbound extended permit tcp any host 321.321.39.12 eq https access-list outside_inbound extended permit tcp any host 321.321.39.13 eq www access-list outside_inbound extended permit tcp any host 321.321.39.13 eq https access-list outside_inbound extended permit icmp any any echo-reply access-list outside_inbound extended permit icmp any any source-quench access-list outside_inbound extended permit icmp any any unreachable access-list outside_inbound extended permit icmp any any time-exceeded access-list outside_inbound extended permit icmp any any traceroute access-list outside_inbound extended permit icmp any any echo pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 2 321.321.39.11-321.321.39.14 netmask 255.255.255.248 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface pptp 172.21.37.20 pptp netmask 255.255.255.255 static (inside,outside) 321.321.39.11 172.21.37.14 netmask 255.255.255.255 static (inside,outside) 321.321.39.12 172.21.37.24 netmask 255.255.255.255 static (inside,outside) 321.321.39.13 172.21.37.17 netmask 255.255.255.255 access-group outside_inbound in interface outside route outside 0.0.0.0 0.0.0.0 321.321.39.9 1 route inside 192.168.15.0 255.255.255.0 172.21.36.52 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 172.21.36.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 172.21.36.0 255.255.252.0 inside telnet timeout 60 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect pptp inspect ipsec-pass-thru inspect http ! service-policy global_policy global prompt hostname context The servers that had static forwards did not have any outside network access. couldn't ping google.com for instance. mail server couldn't Domain POP the Barracuda spam filter from our ISP etc. So after doing some reading I removed the statics for 172.21.37.11, 12 and 13, and replaced those three with what's below.. static (inside,outside) tcp 321.321.39.11 https 172.21.37.14 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 993 172.21.37.14 993 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 smtp 172.21.37.14 smtp netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 1001 172.21.37.14 1001 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 465 172.21.37.14 465 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 domain 172.21.37.14 domain netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 www 172.21.37.24 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 https 172.21.37.24 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 www 172.21.37.17 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 https 172.21.37.17 https netmask 255.255.255.255 Now the servers (for instance 172.21.37.14) could ping the outside world again. Mail started flowing (Domain POP was successful) etc. etc. But I forgot to check if webmail worked from the outside admittedly. But the webservers at 172.21.37.17 and 172.21.37.24 still didn't respond from the outside world. Although I was able to PPTP VPN in on 321.321.39.10 (interface) which is the outside interface IP address. and it is static mapped to 172.21.37.20. So I'm thinking there must be something wrong with NAT somewhere? no response from 321.321.39.11 to 321.321.39.14.. Could anyone look over the config and please let me know what I've done wrong? Is there something I've missed? well obviously but.. please help! Thank you.

  Read the article

• Find if IP Address is in use

  - by WedTM

  I'm trying to find if an IP address is in use. I don't want to rely on ping, as most of our hosts have ICMP echo and reply turned off. I'm looking for something that mimics window's "IP Address Conflict" detection. (How does this mechanism do it?)

  Read the article

• How to avoid keyboard layout automatically changing on windows

  - by andrecarlucci

  I have two input languages in my language bar (windows xp). The problem is that windows likes changing between them without any intervention. That's really annoying! I know about the shortcuts and already turned off Word language detection, but the problem is everywhere (specially command prompt). I use both languages and I want to change between them only manually. How to turn off this automatic change?

  Read the article

• New Google Chrome Beta?

  - by Tyilo

  I currently have Google Chrome dev version installed, however visting http://www.soundstep.com/blog/experiments/jsdetection/, it said I needed to install Google Chrome Beta. Isn't dev higher than beta? I thought there was these versions of Google Chrome, from lowest to highest version: Stable Beta Dev Canary (Chromium) Is the detection of my browser failing on the website, or have Google Chrome changed their versioning system? Download link for the "new" chrome beta: https://www.google.com/landing/chrome/beta/

  Read the article

• How mail tracking works?

  - by abc

  whoreadme is the web site that helps to track mail reader's location as well as it acknowledges when reader opens mail. What is the concept of detection behind this?

  Read the article

• Does the Acer Ferrari One support hardware assisted virtualization?

  - by cmeerw

  Does anyone know if the Acer Ferrari One supports hardware assisted virtualization (it should easy to find out by running Microsoft's Hardware-Assisted Virtualization Detection Tool on that machine). There is lot's of speculation around the web, but I haven't found a definitive answer yet (and would like to confirm that this feature will be working before buying one).

  Read the article

• Computer Networks UNISA - Chap 12 &ndash; Networking Security

  - by MarkPearl

  After reading this section you should be able to Identify security risks in LANs and WANs and design security policies that minimize risks Explain how physical security contributes to network security Discuss hardware and design based security techniques Understand methods of encryption such as SSL and IPSec, that can secure data in storage and in transit Describe how popular authentication protocols such as RADIUS< TACACS,Kerberos, PAP, CHAP, and MS-CHAP function Use network operating system techniques to provide basic security Understand wireless security protocols such as WEP, WPA and 802.11i Security Audits Before spending time and money on network security, examine your networks security risks – rate and prioritize risks. Different organizations have different levels of network security requirements. Security Risks Not all security breaches result from a manipulation of network technology – there are human factors that can play a role as well. The following categories are areas of considerations… Risks associated with People Risks associated with Transmission and Hardware Risks associated with Protocols and Software Risks associated with Internet Access An effective security policy A security policy identifies your security goals, risks, levels of authority, designated security coordinator and team members, responsibilities for each team member, and responsibilities for each employee. In addition it specifies how to address security breaches. It should not state exactly which hardware, software, architecture, or protocols will be used to ensure security, nor how hardware or software will be installed and configured. A security policy must address an organizations specific risks. to understand your risks, you should conduct a security audit that identifies vulnerabilities and rates both the severity of each threat and its likelihood of occurring. Security Policy Content Security policy content should… Policies for each category of security Explain to users what they can and cannot do and how these measures protect the networks security Should define what confidential means to the organization Response Policy A security policy should provide for a planned response in the event of a security breach. The response policy should identify the members of a response team, all of whom should clearly understand the the security policy, risks, and measures in place. Some of the roles concerned could include… Dispatcher – the person on call who first notices the breach Manager – the person who coordinates the resources necessary to solve the problem Technical Support Specialist – the person who focuses on solving the problem Public relations specialist – the person who acts as the official spokesperson for the organization Physical Security An important element in network security is restricting physical access to its components. There are various techniques for this including locking doors, security people at access points etc. You should identify the following… Which rooms contain critical systems or data and must be secured Through what means might intruders gain access to these rooms How and to what extent are authorized personnel granted access to these rooms Are authentication methods such as ID cards easy to forge etc. Security in Network Design The optimal way to prevent external security breaches from affecting you LAN is not to connect your LAN to the outside world at all. The next best protection is to restrict access at every point where your LAN connects to the rest of the world. Router Access List – can be used to filter or decline access to a portion of a network for certain devices. Intrusion Detection and Prevention While denying someone access to a section of the network is good, it is better to be able to detect when an attempt has been made and notify security personnel. This can be done using IDS (intrusion detection system) software. One drawback of IDS software is it can detect false positives – i.e. an authorized person who has forgotten his password attempts to logon. Firewalls A firewall is a specialized device, or a computer installed with specialized software, that selectively filters or blocks traffic between networks. A firewall typically involves a combination of hardware and software and may reside between two interconnected private networks. The simplest form of a firewall is a packet filtering firewall, which is a router that examines the header of every packet of data it receives to determine whether that type of packet is authorized to continue to its destination or not. Firewalls can block traffic in and out of a LAN. NOS (Network Operating System) Security Regardless of the operating system, generally every network administrator can implement basic security by restricting what users are authorized to do on a network. Some of the restrictions include things related to Logons – place, time of day, total time logged in, etc Passwords – length, characters used, etc Encryption Encryption is the use of an algorithm to scramble data into a format that can be read only by reversing the algorithm. The purpose of encryption is to keep information private. Many forms of encryption exist and new ways of cracking encryption are continually being invented. The following are some categories of encryption… Key Encryption PGP (Pretty Good Privacy) SSL (Secure Sockets Layer) SSH (Secure Shell) SCP (Secure CoPy) SFTP (Secure File Transfer Protocol) IPSec (Internet Protocol Security) For a detailed explanation on each section refer to pages 596 to 604 of textbook Authentication Protocols Authentication protocols are the rules that computers follow to accomplish authentication. Several types exist and the following are some of the common authentication protocols… RADIUS and TACACS PAP (Password Authentication Protocol) CHAP and MS-CHAP EAP (Extensible Authentication Protocol) 802.1x (EAPoL) Kerberos Wireless Network Security Wireless transmissions are particularly susceptible to eavesdropping. The following are two wireless network security protocols WEP WPA

  Read the article

• Pygame surface rotation, rect rotation or sprite rotation?

  - by Alan

  i seem to have a conceptual misunderstanding of the surface and rect object in pygame. I currently observe these objects this way: Surface Just the loaded image rect the 'hard' representation of the ingame object (sprite). Used for simplifying object moment and collision detection sprite rect and surface grouped together What i want to do is rotate my sprite. The only available method i found for rotation is pygame.transform.rotate. How do i rotate the rectangle, or even better, the whole sprite? Below is the image of how i visualize this problem.

  Read the article

• XNA Notes 011

  - by George Clingerman

  Even with a lot of the XNA community working on Dream Build Play entries ( I swear I’m going to finish mine this year!) people are still finding time to do side projects and be amazingly active in the XNA and XBLIG community. With my one eye on my code and one eye on the community, here’s what I noticed these over achievers doing this past week! Time Critical XNA News: Xbox LIVE Indie Games sales data will be delayed March 17-20th due to some schedule maintenance http://create.msdn.com/en-us/news/indie_games_data_delay_march2011 GameMarx is releasing a series of videos to help raise donations for victims of the earthquakes and tsunami in Japan. Help out if you can! http://www.gamemarx.com/video/special/29/help-japan-sushido.aspx XNA MVPs: Catalin Zima shares his thoughts on the MVP summit and my book! http://www.catalinzima.com/2011/03/mvp-summit-2011/ Glenn Wilson (@mykre) helps the XNA team announce some new educational content that you don’t want to miss if you’re porting your app or game to Windows Phone 7 http://www.virtualrealm.com.au/Blog/tabid/62/EntryId/653/Porting-your-App-or-Game-to-Windows-Phone-7.aspx and Windows Phone 7 from scratch http://www.virtualrealm.com.au/Blog/tabid/62/EntryId/654/Windows-Phone-from-Scratch.aspx and shares a link to some free architectural models and textures http://twitter.com/#!/Mykre/status/46410160784158720 George (that’s me!) shares his MVP Summit 2011 summary and XBLIG thoughts http://geekswithblogs.net/clingermangw/archive/2011/03/15/144366.aspx XNA Developers: @SmallCaveGames shares a Code of Ethics for Xbox LIVE Indie Game Developers http://smallcavegames.blogspot.com/2011/03/unofficial-xblig-developers-code-of.html Derek S adds more Xbox LIVE Indie Game studios to his master list of XBLIG links http://twitter.com/#!/Mr_Deeke/status/46140996056125440 http://xbl-indieverse.blogspot.com/p/xblig-links.html Making games and want to help kids? Then share your story with GameFace: America! http://gameitupinitiative.com/about-the-initiative/programs/gameface-america/ Xbox LIVE Indie Games (XBLIG): XonaGames shares some video footage of their booth from GDC 2011 Video 1: http://youtu.be/lxIV9nk3Gq4 Video 2: http://youtu.be/GgfrjqkxR_o Video 3: http://youtu.be/yVcpXrTX7SQ Joystiq on Mommy’s Best Games Serious Sam Double D http://www.joystiq.com/2011/03/16/the-most-important-thing-about-serious-sam-double-d/ And The Escapist recommends that gamers start learning to avoid cleavage now http://www.escapistmagazine.com/news/view/108543-Boobie-Bomber-Makes-First-Appearance-in-Serious-Sam-Double-D Magiko Gaming started a blog on the XBLIG dashboard daily Top 10 games in the US. Good way to go back in time and look at the history of which games were in the the Top 10. http://dailytop10indiegames.wordpress.com/ Where are they going now? XBLIG developers at a crossroads.. http://www.gamesetwatch.com/2011/03/where_are_they_going_now_xblig.php http://www.gamasutra.com/view/news/33527/InDepth_Where_Are_They_Going_Now_XBLIG_Developers_At_A_Crossroads_.php BinaryTweed’s Clover: A Curious Tail is Xbox LIVE’s Deal of the Week! http://www.armlessoctopus.com/2011/03/15/what-luck-clover-a-curious-tale-is-half-price-this-week/ Looking for an Xbox LIVE Indie Game to buy? Writings of Mass Deduction has over 125 suggestions at this point! http://writingsofmassdeduction.com/ SkaStudios shares Vampire Smile Achievements AND their PAX East 2011 Both Setup video http://www.ska-studios.com/2011/03/14/vampire-smile-achievement/ http://www.ska-studios.com/2011/03/15/pax-booth-setup-time-lapse/ MasterBlud and VVGTV starts a new community for XBLIG developers and gamers to join http://vvgtv.forumotion.com/ Raymond Matthews (@DrakstarMatryx) covers Mommy’s Best Games getting Serious http://www.darkstarmatryx.com/?p=286 XNA Development: Dave Henry (@mort8088) posts the 4th tutorial in his series XNA 4.0 SpriteBatch extended http://mort8088.com/2011/03/11/xna-4-0-tutorial-4-spritebatch-extended/ Tutorial 5 - Creating a manual blank texture http://mort8088.com/2011/03/13/xna-4-tutorial-5-manual-blank-texture/ XNA 4.0 Tutorial 6 - Spritesheet Object http://mort8088.com/2011/03/18/xna-4-0-tutorial-6-spritesheet-object/ Jason Mitchell shares a tutorial on setting the alpha value for spritebatch in XNA 4.0 http://www.jason-mitchell.com/index.php/2011/03/13/setting-alpha-value-for-spritebatch-draw-in-xna-4/ XNA for Silverlight Developers: Part 7 - Collision Detection http://www.silverlightshow.net/items/XNA-for-Silverlight-developers-Part-7-Collision-detection.aspx Markus Ewald (@Cygon4) shares the full Ninject 2.0 binding for XNA and Sunburn http://twitter.com/#!/Cygon4/status/48330203826622464 Michael B. McLaughlin shares an AccelerometerInput XNA GameComponent he created (which I’m probably going to snag for a game I’m working on...) http://geekswithblogs.net/mikebmcl/archive/2011/03/17/accelerometerinput-xna-gamecomponent.aspx Extra Credit tackles the building of a good tutorial. Must watch for all Indie game devs (thanks for pointing it out Evan Johnson!) http://twitter.com/#!/johnsonevan/status/48452115680604160 http://www.escapistmagazine.com/videos/view/extra-credits/2921-Tutorials-101 ExEn is fully funded at this point so definitely something for XBLIG developers to keep an eye on as they consider releasing their games on other platforms http://rockethub.com/projects/752-exen-xna-for-iphone-android-and-silverlight Channel 9 and Greg Duncan post Mixing the Game State Management and Platformer XNA Recipes http://channel9.msdn.com/coding4fun/blog/Mixing-the-Game-State-Management-and-Platformer-XNA-Recipes Sgt. Conker has noticed Mike McLaughlin has been crazy productive and has done a recap of his recent posts http://www.sgtconker.com/2011/03/recap-of-mikebmcls-posts/

  Read the article

• XNA Notes 004

  - by George Clingerman

  The XNA community has been crazy busy again. It always make me fee like such a slacker collecting all of these notes as I see the tremendous output from people all over the world and it’s incredible and humbling. There are some amazingly skilled people working with XNA. On another not, I’m going to take a minute to get on my soapbox and say, if you are developing ANYTHING and are not using some sort of source/revision control, START IMMEDIATELY. This applies to teams of one. Projects for fun. And “I back up my hard drive” or “I use dropbox!” does NOT count as using source control. You’ll be doing yourself a HUGE favor if you find one, learn to use it and integrate it into your everyday workflow. I personally use Subversion. It’s hosted offsite at xp.dev.com and I use TortoiseSVN as my front end to interface with the repository. It’s simple and easy to use and has saved me from myself so many time. Honestly, get setup with some type of source control immediately. If you don’t understand how, grab another developer that does and have them walk you through setup and the basics of using it. Ok, I’m done. On to the notes… The XNA Team Only 14 days left to Submit XNA GS 3.1 Games! http://blogs.msdn.com/b/xna/archive/2011/01/24/14-days-left-to-submit-xna-gs-3-1-games-on-app-hub.aspx Shawn Hargreaves shares some great information on Exception Handling best practices on the XNA forums http://forums.create.msdn.com/forums/p/73333/448556.aspx#448556 http://blogs.msdn.com/b/ericlippert/archive/2008/09/10/vexing-exceptions.aspx XNA MVPs @CatalinZima gives us a peek at Chicken’s Can’t Fly http://www.amusedsloth.com/games/chickens-cant-fly/ Screen-space deformations in XNA for WP7 from Catalin Zima http://twitter.com/CatalinZima/statuses/30313083767357440 http://www.amusedsloth.com/2011/01/screen-space-deformations-in-xna-for-windows-phone-7/ XNA Developers Going to GDC? Don’t miss the XNA panel hosted by a plethora of well known XNA community names! http://forums.create.msdn.com/forums/p/73576/448842.aspx#448842 MasterBlud does an interview with @Xalterax http://twitter.com/MasterBlud/statuses/28510774812999680 http://www.xboxhornet.com/wordpress/?p=7102 Luke Schneider of Radiangames posts about The Radiangames Style http://radiangames.com/?p=532 Holmade Games had a “vote for the new playable character” poll going on for Hurdle Turtle this past week http://holmadegames.blogspot.com/2011/01/new-level-pack-vote-for-your-favorite.html IGF v0.1.0.0 release post mortem http://indiefreaks.com/2011/01/24/v0-1-0-0-release-post-mortem/ James an Super Dunner post Good Morning Gato #46 and a look at the Vampire Smile box art http://www.ska-studios.com/2011/01/21/good-morning-gato-46/ http://www.ska-studios.com/2011/01/20/vampire-smiles-digital-box-art/ Alfredo Di Napoli creates Cow Pong using XNA and F#! http://alfredodinapoli.wordpress.com/2011/01/25/cow-pong-a-simple-xna-game-in-f/ Xbox LIVE Indie Games Signed In Podcast posts Episode #61 http://www.signedinpodcast.com/?p=559 Gamergeddon posts the January 23rd edition of XBLIG Round Up http://www.gamergeddon.com/2011/01/23/xbox-indie-games-round-up-january-23rd/ Indie Asylum posts Antipole Review http://www.indieasylum.com/reviews/38-xblig/112-antipole.html 1UPOrPosion Reviews OSR Unhinged http://www.1uporpoison.com/xblig/osr-unhinged/ DarkstarMatryx review Warbirds at Work http://www.darkstarmatryx.com/?p=185 Review of Aban Hawkins and the 1000 Spikes http://www.armlessoctopus.com/2011/01/24/xbox-indie-review-aban-hawkins-the-1000-spikes/ XboxHornet reviews Corrupted http://www.xboxhornet.com/wordpress/?p=7123 XBLIG 2010: The Best And The Worst http://www.gamasutra.com/blogs/JamieMann/20110121/6840/ Xbox LIVE Arcade Sales Analysis - an interesting read for XBLIG developers wondering how they’re doing compared to arcade.. http://www.gamerbytes.com/2011/01/xbla_sales_analysis_dec_2010.php Best of Indies for January 25th http://www.thisisfakediy.co.uk/articles/games/best-of-the-indies-25th-january-2011 Decimation X3 appears as an arcade machine in the wild! http://twitter.com/mdoucette/statuses/29605562484260864 XNA Game Development Guiseppe De Francesco (@PinoEire) announced Torque X 4.0 CEV is now in RC phase! http://www.garagegames.com/community/blogs/view/20779 DrMistry of mstargames shares his struggle (and mistakes) with learning to use the Content Pipeline http://www.mstargames.co.uk/mistryblogmain/35-genblog/181-pontent-cipeline-more-like-it.html New Tutorial posted XNA 2D Basic Collision Detection with Rotation from Ioannis Panagopoulos http://www.progware.org/Blog/post/XNA-2D-Basic-Collision-Detection-with-Rotation.aspx Sgt. Conker roars to life! Doing a much better (and prettier) job of collecting XNA news from around the interwebs. http://www.sgtconker.com/ http://www.sgtconker.com/2011/01/dedication-for-captain-boki/ http://www.sgtconker.com/2011/01/screen-space-deformations-in-xna-for-windows-phone-7/ http://www.sgtconker.com/2011/01/xna-4-0-light-pre-pass-2/ http://www.sgtconker.com/2011/01/indiefreaks-game-framework-0-1-0-0-released/ Offering a little free publicity for XBLIGs http://forums.create.msdn.com/forums/p/73465/448321.aspx#448321 Ben Kane writes about building loot tables from Excel using the Content Pipeline http://benkane.wordpress.com/2011/01/23/building-loot-tables-from-excel-using-the-content-pipeline/ Good tips on attracting a game artist AND an offer to create your cover art for FREE http://forums.create.msdn.com/forums/t/72998.aspx If you’re an XBLIG developer keeping your eye on places to release on the PC, might want to be watching the IndieCity blog. Seems like these guys are well on their way to constructing something worth watching. http://www.indiecity.com/blog/ DVMGames spotted a new crowd-funding site for Indies http://twitter.com/DVMGames/statuses/29947274767372289 http://www.8bitfunding.com/ Transmute continues to make progress and there’s a nice dev blog to follow along here http://forgottenstarstudios.com/blog/

  Read the article

• what are the problems in game development that requires scientific research? [on hold]

  - by Anmar

  I been into Game Development for approximately 2 years for now mostly prototype development and testing ideas. Im in a point of my carrier where I am in a need to publish a research paper I would love to start doing research about game development however my lack of experience in actual game development in a commercial set of environment brings me into Game development in stackexchange My question is for the experience game developers out there What are the problems related to software engineering that you have faced or your team faced while developing games? Example Problems ? The lack of a strong technique for Fun detection in a game in an early stage of development A strong tailored Software Development Life Cycle for game development Agile methodology as a game development methodology Narrowing the goals gap between team members (Editors, Story Designers, Programmers, 3D artists, 2D Artists) - Community Suggestions Indie game marketing requirements for success by Yakyb Any problems you could define it I would be more than happy to take it into consideration for future research. My experience and work mostly involve process related basically SDLC (Waterfall, Spiral, Agile, RUP .Etc) Thank you for any input.

  Read the article

• Migrating SQL Server Databases – The DBA’s Checklist (Part 2)

  - by Sadequl Hussain

  Continuing from Part 1  , our Migration Checklist continues: Step 5: Update statistics It is always a good idea to update the statistics of the database that you have just installed or migrated. To do this, run the following command against the target database: sp_updatestats The sp_updatestats system stored procedure runs the UPDATE STATISTICS command against every user and system table in the database.  However, a word of caution: running the sp_updatestats against a database with a compatibility level below 90 (SQL Server 2005) will reset the automatic UPDATE STATISTICS settings for every index and statistics of every table in the database. You may therefore want to change the compatibility mode before you run the command. Another thing you should remember to do is to ensure the new database has its AUTO_CREATE_STATISTICS and AUTO_UPDATE_STATISTICS properties set to ON. You can do so using the ALTER DATABASE command or from the SSMS. Step 6: Set database options You may have to change the state of a database after it has been restored. If the database was changed to single-user or read-only mode before backup, the restored copy will also retain these settings. This may not be an issue when you are manually restoring from Enterprise Manager or the Management Studio since you can change the properties. However, this is something to be mindful of if the restore process is invoked by an automated job or script and the database needs to be written to immediately after restore. You may want to check the database’s status programmatically in such cases. Another important option you may want to set for the newly restored / attached database is PAGE_VERIFY. This option specifies how you want SQL Server to ensure the physical integrity of the data. It is a new option from SQL Server 2005 and can have three values: CHECKSUM (default for SQL Server 2005 and latter databases), TORN_PAGE_DETECTION (default when restoring a pre-SQL Server 2005 database) or NONE. Torn page detection was itself an option for SQL Server 2000 databases. From SQL Server 2005, when PAGE_VERIFY is set to CHECKSUM, the database engine calculates the checksum for a page’s contents and writes it to the page header before storing it in disk. When the page is read from the disk, the checksum is computed again and compared with the checksum stored in the header.  Torn page detection works much like the same way in that it stores a bit in the page header for every 512 byte sector. When data is read from the page, the torn page bits stored in the header is compared with the respective sector contents. When PAGE_VERIFY is set to NONE, SQL Server does not perform any checking, even if torn page data or checksums are present in the page header.  This may not be something you would want to set unless there is a very specific reason.  Microsoft suggests using the CHECKSUM page verify option as this offers more protection. Step 7: Map database users to logins A common database migration issue is related to user access. Windows and SQL Server native logins that existed in the source instance and had access to the database may not be present in the destination. Even if the logins exist in the destination, the mapping between the user accounts and the logins will not be automatic. You can use a special system stored procedure called sp_change_users_login to address these situations. The procedure needs to be run against the newly attached or restored database and can accept four parameters. Depending on what you want to do, you may be using less than four though. The first parameter, @Action, can take three values. When you specify @Action = ‘Report’, the system will provide you with a list of database users which are not mapped to any login. If you want to map a database user to an existing SQL Server login, the value for @Action will be ‘Update_One’. In this case, you will only need to provide the database user name and the login it will map to. So if your newly restored database has a user account called “bob” and there is already a SQL Server login with the same name and you want to map the user to the login, you will execute a query like the following: sp_change_users_login         @Action = ‘Update_One’,         @UserNamePattern = ‘bob’,         @LoginName = ‘bob’ If the login does not exist, you can instruct SQL Server to create the login with the same name. In this case you will need to provide a password for the login and the value of the @Action parameter will be ‘Auto_Fix’. If the login already exists, it will be automatically mapped to the user account. Unfortunately sp_change_users_login system stored procedure cannot be used to map database users to trusted logins (Windows accounts) in SQL Server. You will need to follow a manual process to re-map the database user accounts.  Continues…

  Read the article

• Best SEO practices for mobile URLs: 301, rel=canonical, or something else?

  - by Chris

  I am developing a site with a mobile version and am trying to figure the appropriate way to manage the URLs for search engines. So far I've considered: Having a mobile site with rel="canonical" links to the regular site. Putting both the mobile site and full site on one URL, and doing user agent sniffing. Another opinion: Spencer: "If you have a mobile site at a separate location or URL, you should 301 redirect each and every mobile page to its corresponding page on your main website. Employ user agent detection so that the mobile optimized version is served up if someone's coming in from a hand-held. - http://developer.practicalecommerce.com/articles/1722-Mobile-site-Development-Best-Practices-for-SEO-Usability Both 2 and 3 make it hard for a user who wants to switch to the full site or mobile site manually, but I'm not sure 1 is the best alternative. What's the best way to write URLs for a mobile site?

  Read the article

• GDC 2012: Best practices in developing a web game

  GDC 2012: Best practices in developing a web game (Pre-recorded GDC content) There's a new wave of console/pc/mobile game developers moving to the web looking to take advantage of the massive user base, along side of the powerful social graphs available there. The web as a platform is a very different technology stack than consoles / mobile, and as such, requires different development processes. This talk is targeted towards game developers who are looking to understand more about the development processes for web development including where to host your assets, proper techniques in caching to the persistant file store; dealing with sessions, storing user state, user login, game state storage, social graph integration, localization, audio, rendering, hardware detection and testing / distribution. If you're interested in developing a web game, you need to attend this talk! Speaker: Colt McAnlis From: GoogleDevelopers Views: 5149 131 ratings Time: 01:03:52 More in Science & Technology

  Read the article

• DIY Weather-Aware Umbrella Stand Signals Stormy Weather

  - by Jason Fitzpatrick

  This clever DIY project adds ambient weather notification to your umbrella stand–simply walk by it on your way out the door to get a subtle reminder to take your umbrella. The clever setup involves a hobby board, motion detection, and LEDS to a rather clever end. As you walk by the semi-translucent umbrella stand all of it is mounted in, it lights up to indicate the weather conditions. Blue indicates the forecast for the day shows no sign of rain, green indicates rain, and red indicates thunderstorms. Check out the above video to see the hardware involves and the stand in action; hit up the link below for the full build guide including code. DIY Umbrella Stand Hack with Rain Alert [via Make] How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

  Read the article

• How to move a sprite on a slope in chipmunk Spacemanager

  - by Anil gupta

  I have used one polygon shape image (terrain) in my game. It's just like a mountain, and now I want to move the tanker on a mountain path from one side to the other and then turn around at the edge of the screen and go back. I don't understand the method to move the tanker on the slope (image) path in chipmunk spacemanager. When collision detection happens like that, if any bomb falls on the slope (image of mountain) then I want to do a little damage to the slope (image of mountain) like this video.

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >