Search Results

Search found 20300 results on 812 pages for 'link listing'.

Page 40/812 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47 | Next Page >

ospfd over an OpenVPN link - strange error in logs

- by Alex

I am trying to set up Quagga ospfd on two hosts connected by an OpenVPN link. These hosts have VPN IPs 10.31.0.1 and 10.31.0.13. ospfd config is pretty simple: hostname bizon password xxxxxxxxx enable password xxxxxxxxx ! log file /var/log/quagga/ospfd.log ! interface lo ! interface tun0 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 interface tun1 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 interface tun2 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 ! router ospf ospf router-id 10.31.0.1 network 10.31.0.0/16 area 0.0.0.0 network 10.119.2.0/24 area 0.0.0.0 redistribute connected area 0.0.0.0 range 10.0.0.0/8 ! line vty ! debug ospf event debug ospf packet all I am getting the following error in the ospfd.log (the log is from 10.31.0.13): 2012/10/05 01:25:28 OSPF: ip_v 4 2012/10/05 01:25:28 OSPF: ip_hl 5 2012/10/05 01:25:28 OSPF: ip_tos 192 2012/10/05 01:25:28 OSPF: ip_len 64 2012/10/05 01:25:28 OSPF: ip_id 64666 2012/10/05 01:25:28 OSPF: ip_off 0 2012/10/05 01:25:28 OSPF: ip_ttl 1 2012/10/05 01:25:28 OSPF: ip_p 89 2012/10/05 01:25:28 OSPF: ip_sum 0xe5d1 2012/10/05 01:25:28 OSPF: ip_src 10.31.0.1 2012/10/05 01:25:28 OSPF: ip_dst 224.0.0.5 2012/10/05 01:25:28 OSPF: Packet from [10.31.0.1] received on link tun1 but no ospf_interface I'm not sure what to do next. I have set up ospfd over OpenVPN several times but I used Debian and I am on CentOS 6 now. Quagga version is 0.99.15. Should I try to get more recent version?

Read the article
OS X: MySQL not dealing properly with data directory via soft link

- by GJ

I am trying to get a macports-installed MySQL to use a data directory stored inside my FileVault-protected home dir. I used sudo cp -a /opt/local/var/db/mysql5 ~/db/ (the -a to ensure file permissions remain intact) and then replaced the original mysql5 directory with a soft link: sudo ln -s ~/db/mysql5 /opt/local/var/db/mysql5 However, when I now try to start MySQL it fails. It follows the soft link at least to the extent that it modifies some files in the ~/db/mysql5 dir, notably the error log which gets appended to it this: 110108 15:33:08 mysqld_safe Starting mysqld daemon with databases from /opt/local/var/db/mysql5 110108 15:33:08 [Warning] '--skip-locking' is deprecated and will be removed in a future release. Please use '--skip-external-locking' instead. 110108 15:33:08 [Warning] '--log_slow_queries' is deprecated and will be removed in a future release. Please use ''--slow_query_log'/'--slow_query_log_file'' instead. 110108 15:33:08 [Warning] '--default-character-set' is deprecated and will be removed in a future release. Please use '--character-set-server' instead. 110108 15:33:08 [Warning] Setting lower_case_table_names=2 because file system for /opt/local/var/db/mysql5/ is case insensitive 110108 15:33:08 [Note] Plugin 'FEDERATED' is disabled. 110108 15:33:08 [Note] Plugin 'ndbcluster' is disabled. /opt/local/libexec/mysqld: Table 'mysql.plugin' doesn't exist 110108 15:33:08 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110108 15:33:09 InnoDB: Started; log sequence number 4 1596664332 110108 15:33:09 [ERROR] /opt/local/libexec/mysqld: Can't create/write to file '/opt/local/var/db/mysql5/mac.local.pid' (Errcode: 13) 110108 15:33:09 [ERROR] Can't start server: can't create PID file: Permission denied 110108 15:33:09 mysqld_safe mysqld from pid file /opt/local/var/db/mysql5/gPod.local.pid ended I can't see why MySQL can't create the pid file, since manually creating it using the _mysql user succeeds (sudo -u _mysql touch mac.local.pid from inside ~/db/mysql5) Any ideas how to resolve this?

Read the article
Nginx rewrite for link shortener + Wordpress pretty URLs

- by detusueno

Okay so I installed Nginx/PHP/MySQL/Wordpress via a online walk through, and it had me enter these rewrites to enable Wordpress pretty URLs: if (-f $request_filename) { break; } if (-d $request_filename) { break; } rewrite ^(.+)$ /index.php?q=$1 last; error_page 404 = //index.php?q=$uri; This is then included in the vhost for my domain. What I'm trying to do now is add some redirection/link shortner rewrites that will play nice with the setup I have in mind. I'd like to redirect "x.com/y" to "x.com/script.php?id=y" for all external links that I post. The Wordpress link setup right now has almost all internal links begin with "news" (x.com/news/post-blah, x.com/news/category/1, etc) BUT I also have a few root links that point to some internal content (x.com/news, x.com/start). I'm guessing that's going to cause some conflicts. What's the best approach to do this? I've never worked with Nginx (or any rewrite rules) but maybe I can distinguish between "x.com/news" and "x.com/news/" to allow it to play nice? I had a friend setup a working version of this in Apache and it'd be nice if I could get this up on Nginx again.

Read the article
OpenVPN on Tomato and Vista - can't see my network

- by Ian

I followed the instructions here (http://todayguesswhat.blogspot.ca/2011/03/quick-simple-vpn-setup-guide-using.html) to set up a TCP connection to OpenVPN on my Tomato router. Used TCP because the place I usually surf at seems to have the other ports blocked. My Vista laptop is able to connect to the router but I don't appear to be getting an IP address. I'm able to access my router's admin page, but I can't see the network at home. When I browse to Whatsmyip I see my home IP. Here are the results of route print -4 when I'm just connect to the library and when I've fired up the VP connection as well: Library only: =========================================================================== Interface List 22 ...00 ff c4 a0 e7 5c ...... TAP-Win32 Adapter V9 15 ...00 23 4e 20 b3 64 ...... Atheros AR9281 Wireless Network Adapter 10 ...00 23 8b 39 ec 71 ...... Marvell Yukon 88E8040T PCI-E Fast Ethernet Controller 1 ........................... Software Loopback Interface 1 11 ...00 00 00 00 00 00 00 e0 isatap.{834A8A0A-5E2C-47D0-9673-7965DE8B5470} 14 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 17 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 20 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 18 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 19 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 23 ...00 00 00 00 00 00 00 e0 isatap.{C4A0E75C-765E-4F7D-A55C-77945779816A} 34 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.29.1 10.1.29.117 25 10.1.29.0 255.255.255.0 On-link 10.1.29.117 281 10.1.29.117 255.255.255.255 On-link 10.1.29.117 281 10.1.29.255 255.255.255.255 On-link 10.1.29.117 281 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.1.29.117 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.1.29.117 281 =========================================================================== Library and TCP OpenVPN: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.29.1 10.1.29.117 25 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.116 30 0.0.0.0 128.0.0.0 192.168.1.1 192.168.1.116 30 10.1.29.0 255.255.255.0 On-link 10.1.29.117 281 10.1.29.117 255.255.255.255 On-link 10.1.29.117 281 10.1.29.255 255.255.255.255 On-link 10.1.29.117 281 24.212.205.68 255.255.255.255 10.1.29.1 10.1.29.117 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 192.168.1.1 192.168.1.116 30 192.168.1.0 255.255.255.0 On-link 192.168.1.116 286 192.168.1.116 255.255.255.255 On-link 192.168.1.116 286 192.168.1.255 255.255.255.255 On-link 192.168.1.116 286 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.116 286 224.0.0.0 240.0.0.0 On-link 10.1.29.117 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.116 286 255.255.255.255 255.255.255.255 On-link 10.1.29.117 281 =========================================================================== Thanks for any advice. I looked at one of the answers but I'm not sure if it applied to me as it said that 10...* was the vpn connection, but I appear to have 10...* when I connect just to the library.

Read the article
BI&EPM in Focus November 2012

- by Mike.Hallett(at)Oracle-BI&EPM

Customers · San Diego Unified School District Harnesses Attendance, Procurement, and Operational Data with Oracle Exalytics, Generating $4.4 Million in Savings · NilsonGroup chooses Oracle Exalytics In-Memory Machine as their solution to access critical data to keep its stores competitive with real-time Mobile BI: Video · Nykredit, in the Danish Financial Sector, describes their experiences from testing the Exalytics Business Intelligence Machine: Video · Sodexo chose Oracle Exalytics as their business analytics platform: Video · AstraZeneca (US, Canada, MedImmune) Improves Insight, Analytics, and Reporting, Enterprisewide with Unified Planning on a Single Platform · Experian Consolidates Reporting Systems for One, Global View of Financial Data and Improves Planning for Continued Growth · Munchkin Gives its Line of Children’s Products Plenty of Room to Grow in an Upgraded Enterprise Application Environment · Top 20 EPM Customer Snapshots, in One Handy Booklet (link) · Customer and Partner Successes: Link to Complete Archive Enterprise Performance Management · Nov 15: Is Hope and Email the Core of your Reconciliation Process? (link) · Replay: Integrated Business Planning, Featuring Leggett & Platt (link) · Whitepaper: The New Competitive Advantage - Strategic CIO's Embrace the Cloud (link) · Press: Oracle Enterprise Performance Management Driving Significant Improvements in Budget Management and Reporting for Public Sector Organizations (link) · Enterprise Performance Management Video Feature Overviews, Now Available on YouTube (link) · NEW Solution Brief - Oracle Hyperion Planning on the Oracle Exalytics In-Memory Machine (link) · For Insurance sector: Datasheet for new release V2.0 - Oracle Quantitative Management and Reporting for Solvency II (link) · Whitepaper FSN 2012: Managing Risk and Uncertainty, an Executive's Guide to Integrated Business Planning (link) · NEW Datasheet for Oracle Planning and Budgeting Cloud Service (link) · Blog: Planning in the Cloud - For Real Business Intelligence · Press: Latest Release of Oracle Exalytics In-Memory Machine Software Enables Customers to View and Analyze Data at the Speed of Business (link) · Press: New Release (11.1.1.6.2BP1) of Oracle Business Intelligence Enables Users to Quickly Access and Analyze Key Business Information, Anytime, Anywhere (link) · Mark Hurd Interviewed on USA Today about Big Data & Analytics (link) · Whitepaper: Mastering Big Data - CFO Strategies to Transform Insight into Opportunity (link) · Nov 15: Improve Asset Utilization. Achieve Greater Profitability: Oracle Enterprise Asset Management Analytics (link) · Replay: Oracle Enterprise Asset Mgmt Analytics and Oracle Manufacturing Analytics (link) · Overload to Impact: An Industry Scorecard on Big Data Business Challenges (link) · Webcast Replay: Overview of Oracle Endeca Informational Discovery (link) · OBIEE 11g: Required and Recommended Patches and Patch Sets (link)

Read the article
can't connect 2 subnets through RRAS 2008 r2

- by mcdwight6

I'm working on a project for a networking class. In VMWare Workstation, I have to set up a 2008 r2 server with DHCP reservations for 2 clients on separate subnets and have them ping each other. Here is the output of the route print command: =========================================================================== Interface List 13 ...00 50 56 2a e7 11 ...... Intel(R) PRO/1000 MT Network Connection #3 10 ...00 0c 29 66 88 dd ...... Intel(R) PRO/1000 MT Network Connection 1 ........................... Software Loopback Interface 1 24 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 14 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 16 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 17 ...00 00 00 00 00 00 00 e0 isatap.{5B8FB196-616F-4168-A020-03E63A309CEC} =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.0.2 266 0.0.0.0 0.0.0.0 On-link 223.6.6.2 266 10.0.0.0 255.0.0.0 On-link 10.0.0.2 266 10.0.0.2 255.255.255.255 On-link 10.0.0.2 266 10.255.255.255 255.255.255.255 On-link 10.0.0.2 266 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.6.0.0 255.255.0.0 On-link 10.0.0.2 11 128.6.255.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.0 255.255.255.0 On-link 10.0.0.2 11 223.6.6.0 255.255.255.0 On-link 223.6.6.2 266 223.6.6.2 255.255.255.255 On-link 223.6.6.2 266 223.6.6.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.255 255.255.255.255 On-link 223.6.6.2 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.0.0.2 266 224.0.0.0 240.0.0.0 On-link 223.6.6.2 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.0.0.2 266 255.255.255.255 255.255.255.255 On-link 223.6.6.2 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.0.0.2 Default 0.0.0.0 0.0.0.0 128.6.0.2 Default 0.0.0.0 0.0.0.0 223.6.6.2 Default 128.6.0.0 255.255.0.0 10.0.0.2 1 223.6.6.0 255.255.255.0 10.0.0.2 1 =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 14 1010 2002::/16 On-link 14 266 2002:8006:2::8006:2/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None My problem is that although I have set up both dynamic and persistent static routes in my r2 server, neither of the clients can ping even the NIC outside its own subnet. For example Client A can ping the NIC at 10.0.0.2 and vice-versa, but it gets a general transmit failure when it tries to ping the card at 223.6.6.2, let alone trying to ping the other client. I have completely disabled the firewalls on all machines and anything else I could think of, without success. What am I missing? Edit: Since posting this, I also noticed that the default gateways on my 2 NICs keep getting zeroed out. Does anyone know a fix for this?

Read the article
Newsletter link to share a webpage on facebook - Facebook is not accepting it.

- by donaldthe

My question is what link should I use to enable a 1 click share on facebook of a webpage from an external application such as an email? Thanks Here are the details: User submits content to my website. Content is first reviewed by webmaster Webmaster sends out congratulations email, "Your article has been published, here is the link: http://www.mywebsite.com/new-page.html" I would like to include in the congratulations email, "Click on this link to share your article with your friends on facebook" The link I am using is the following: http://www.facebook.com/share.php?u=http://www.mywebsite.com/new-page.html If I paste it into the address bar and I am logged in it works fine and facebook parses the new page for meta data and displays Page title and description. However, when clicking on the link from my newsletter, I am redirected to the login page, even though I am logged in, and after logging in, I am sent to my profile page and the share is not posted.

Read the article
Create NTFS symbolic links from within Linux

- by rymo

Is there a Linux utility that can create NTFS symbolic links? That is, a link on an NTFS partition that points to another NTFS folder - one that will work within Windows 7, specifically. I wish to relocate a folder that is normally in-use while Windows is running. This machine can already dual-boot into Ubuntu, so I'd like to leverage that. EDIT: To keep this from potentially turning into "which Windows Live CD is best", I will limit this question to "Is it possible with Linux, yes or no?"

Read the article
Allow certain users to access a specific directory?

- by animuson

I'm trying to figure out how to allow certain users who are also me to access a directory of files that I want to use for all of my users. I'm using cPanel and I used WHM to create three separate accounts. The files I want to use are on account1 in the directory /home/account1/public_html/source/engines and I want the directory /home/account2/public_html/source/engines to use the same exact files without having to upload them to both places every time I change them, so I created a simple symbolic link and added account2 to the group account1 (while still keeping its own group as the primary). It still gives me a Permission Denied error though. Is there any way I can grant account2 and other accounts that I create for myself access to those files? I don't want them to be global to all users because I don't want my hosted users to be able to access them, only my users. groups account1 returns account1 : account1 groups account2 returns account2 : account2 account1 /home/account1/public_html/source/engines and all its files belongs to account1:account1 Any other information you might need just ask.

Read the article
script not run after reboot from /etc/rc3.d

- by yael

I create symbolic link to the file - /etc/rc3.d/platform.bash from /var/tmp/platform.bash ln -s /var/tmp/platform.bash /etc/rc3.d/platform.bash script exist under /var/tmp : -rwxr-xr-x 1 root root 58442 Aug 30 08:49 platform.bash view from /etc/rc3.d : lrwxrwxrwx 1 root root 31 Aug 30 06:33 S99platform.bash -> /var/tmp/platform.bash my target is to run platform.bash after reboot ( on solaris 10 OS ) from some reason the script platform.bash not run after reboot ? please advice what I need to check in order to verify the problem ? my script ( platform.bash ) #!/bin/bash echo test > /var/tmp/log.txt

Read the article
Server-to-Switch Trunking in Procurve switch, what does this mean?

- by MattUebel

I am looking to set up switch redundancy in a new datacenter environment. IEEE 802.3ad seems to be the go-to concept on this, at least when paired with a technology that gets around the "single switch" limitation for the link aggregation. Looking through the brochure for a procurve switch I see: Server-to-Switch Distributed Trunking, which allows a server to connect to two switches with one logical trunk; increases resiliency and enables load sharing in virtualized data centers http://www.procurve.com/docs/products/brochures/5400_3500%20Product%20Brochure4AA0-4236ENW.pdf I am trying to figure out how this relates to the 802.3a standard, as it seems that it would give me what I want (one server has 2 nics, each of which is connected to separate switches, together forming a single logical nic which would provide the happy redundancy we want), but I guess I am looking for someone familiar with this concept and could add to it.

Read the article
Figure out what non-symlink path would be?

- by David Mackintosh

On Linux, if I've cd'd around and am now in a directory, is there a way to figure out what the real path to that directory is if I had not used a symbolic link to get there? Consider: $ pwd /home/dave/tmp $ mkdir -p 1/2/3/4/5 $ ln -s 1/2/3/4/5 5 $ cd 5 $ pwd /home/dave/tmp/5 Or: $ pwd /home/dave/tmp $ mkdir -p 1/2/3/4/5 $ ln -s 1/2/3/4 4 $ cd 4/5 $ pwd /home/dave/tmp/4/5 Is there any way to figure out that /home/dave/tmp/5 is really /home/dave/1/2/3/4/5 ?

Read the article
How much the distance and ms can affect on the download speed ?

- by Prix

Let's consider A (client) and B (server) where A makes download from B. How much can a bad routing from A to B affect the download speed ? For example A does a tracert to B and get a response of 10 steps where the avg ms is around 300 with 10% packet loss at the 4 step and when the connection is normal the avg from A to B is 10 ~ 30 ms. Could this sort of impact reduce A download speed drasticaly or as long as both side and routes have enough link for the full speed of A from B and vice-versa it should maintain the same speed ? Besides tracert and the ping analyse of A to B what else is used to identify the problem ? If you need extra information please let me know.

Read the article
Windows - Force Wi-Fi to N mode

- by Frederick Marcoux

I bought a month ago the D-Link DWA-160 Xtreme N Dual Band USB Adapter and I wonder about the speed. I have a 60Mbps but the speed is never above 300Kbps when I browse Internet or download something. Even from Microsoft or Apple (the fastest server I found). Now on Windows 8, we can see the Wi-Fi stats in Task Manager, there they are: Notice the red rectangle. The signal is 3/5 and I'm about 5 meters far from my router. An Apple Time-Capsule. Also, the connection type is 802.11g, I want N. I made this config in my Device Properties: Does anyone figured out to force the 802.11n in Windows? (Windows 8 preferably)

Read the article
Create NTFS symbolic links from within Linux

- by rymo

Is there a Linux utility that can create NTFS symbolic links? That is, a link on an NTFS partition that points to another NTFS folder - one that will work within Windows 7, specifically. I wish to relocate a folder that is normally in-use while Windows is running. This machine can already dual-boot into Ubuntu, so I'd like to leverage that. EDIT: To keep this from potentially turning into "which Windows Live CD is best", I will limit this question to "Is it possible with Linux, yes or no?"

Read the article
Automatically cycle numerous or large files to the trash

- by minameismud

I've been tasked with fixing a vendor's program that, under certain conditions, dumps gigs of junk files into a log directory. It ends up filling users' machines. My task is to figure out how to make it stop without any source code or additional running processes, and without making the program kasplode. In other words, I'm looking to use a feature of the file system to control the growth. One idea I had was to make a hard link from that folder to NUL, as you might with /dev/null in the linux world. However, my attempts to use the mklink program to create a junction result in a message that says Local volumes are required to complete the operation. Any ideas on how to complete the junction, or other ideas to solve the problem?

Read the article
How do I set my router up to authenticate with my service provider?

- by João Lourenço

Currently I have this setup: D-Link DSL2640U connected to the phone line: VPI/VCI 0/40, Service Category UBR Without PCR Service pppoe_0_40_3 Interface nas_0_40 Protocol Bridging (LLC/SNAP-Bridging) 802.11q not enabled Bridge Service Enabled Computers have individual PPPoE connections (in Network and Sharing Centre - Set up a new connection or network - Connect to the Internet - Broadband (PPPoE) - Username and Password) How would I move these settings on each individual PC to the router so that all I need to do is connect to the wireless? I have been unsuccessful setting up anything other than Windows PCs on the network (I have tried Macs, iOS and Nokia SmartPhones too). Thanks for the responses in advance!

Read the article
How to know which revision or router I do have?

- by Rosamunda

I´m trying to update my D-link Dir-600 router with the dd-wrt firmware. I´ve searched for it at the site and found that: Revision A1, B1 and B2 are supported, while C isn´t. Now my router has this information on the back: P/N IIR600GNA .... C1G H/W Ver: C1 F/W Ver: 3.01 So I guess the H/W Ver is the revision, and it´s C... so it´s a lost cause? Or maybe because it´s not just C but C1 I could do something with it? Thanks!

Read the article
Downloading content greater than 2000 bytes from local network hangs in browser on Windows XP

- by artplastika

We have web application that runs under Tomcat in a local network. Our customers experience strange problem using this web application. Let's say Tomcat server runs on host1 and we open webapp URL in browser on host2. Any browser on host 2 starts opening page and downloading of content "hangs" for hours. We've made bunch of experiments and found that any content larger than 2000 bytes makes browser request hang. Tried in Internet Explorer 8, Opera 12, Firefox. At the same time if user opens website from internet, it works. Opening webapp from the same host1 where Tomcat is running works normally. Local network is organized with D-Link DGS-3120-48TC switch. Additional info. During experiments we've noticed XP Tweaker installed on hosts. Network settings from that tool: MTU is manually set to 1500 RWIN = 14600 Support of TCP frames larger than 64 KB is on Time to Live = 32 SACK is on

Read the article
Newly installed DIR-615 - how to connect to the wireless?

- by JK123

I've just installed a D-Link DIR 615, but can't figure out how to connect to the wireless.. When I double click my wireless icon in the tray, it does show the new network. Its starts the "WiFi protected setup wizard" and the first thing it asks for is the "Device Ownership Password". I have no idea what that is - I've tried the PIN and the router password. On the next page it says: SSID: _(name)__ Security type: _wpa2 personal aes ccmp_ Password: _some long key that is not what I entered during router setup_ I change the key to the one I created when setting up the router. I've also tried leaving the key as it is shown in the dialog. But it does not connect either way. All it says is "Configuration failed" So how do I connect to the new wireless network??

Read the article
mac os x, find all symbolic links that point to files on a different volume

- by Eddified

In my ~ dir, I have some symlinks that point to "/Volumes/Macintosh HD 2/..." and I want to find them all recursively. A look at the man page for 'find' says the '-lname' argument will search the symbolic link contents. It appears to work, but not recursively: $ pwd /Users/myusername $ sudo find . -lname '/Volumes*' $ cd Documents/ $ sudo find . -lname '/Volumes*' ./Documents on Win7 ./work.rtf What's going on? How can I make this work recursively? -- The 'find' program is supposed to always work recursively. I checked perms, they look ok, but as you can see I used "sudo" just to be sure... no dice. $ ls -ld Documents/ drwx------+ 14 myusername staff 476 Jan 12 16:32 Documents/

Read the article
Wireless Bridge -DHCP

- by Usta

I was thinking of picking up a couple of TP-Link wireless routers, and setting them to bridge. I have a sep. LAN network that would have one of them, and I'd put one on my internet connection. Would I be able to keep my current IP subnets? (255.255.255.0 and 255.0.0.0) or would I have to pull my IPs from the same IP range. (I want to keep my current DHCP servers in place) The reason I want a bridge is so that I can VPN into the internal network.

Read the article
Moving the home directory to a new drive

- by Mellowcandle

I have no more space left on my hard-drive. So I bought a new one and I would like this hard-drive to be the home folder. I thought of copying all the stuff I have on the home folder to the hard-drive partition. and creating a symbolic-link from ~ to there. The problem I have is that I can't really delete the home folder while I'm logged in as the current user. Is there a way to log out, and log in as root in Linux Mint? I want to be able to do this without a live-CD solution.

Read the article
How to get java to recognize symbolic links under cygwin

- by Keith Randall

Here's a very simple java program to print the first line of a file: import java.io.* public class test { public static void main(String[] args) throws IOException { System.out.print(new BufferedReader(new FileReader(args[0])).readLine()); } } When I run this program under cygwin and pass it the name of a symbolic link, it prints the contents of the symbolic link, not the target of that link: $ echo foo > testfile $ ln -s testfile symlink_to_testfile $ java test testfile foo $ java test symlink_to_testfile !<symlink> ?t e s t f i l e How do I convince java to follow the symlink? I was hoping there was something simpler than implementing the redirect myself.

Read the article
How to Make URLs clickable inside of UITableViewCell ?

- by Chris

I know how to use UIWebView and can invoke a WebView if it is associated with a specific button or UITableViewCell. What I am trying to achieve is to have a UITableViewCell with a chunk of text. That chunk of text might contain a URL. I want to make the URL into a clickable link and have that link open into a WebView. My thought so far has been that I need to detect a link and insert it as a UIButton within the cell... but I don't know if that is the right way to go about this. Any ideas or input would be much appreciated.

Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47 | Next Page >