Search Results

Search found 2682 results on 108 pages for 'michael mao'.

Page 40/108 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

  • Apache on Win32: Slow Transfers of single, static files in HTTP, fast in HTTPS

    - by Michael Lackner
    I have a weird problem with Apache 2.2.15 on Windows 2000 Server SP4. Basically, I am trying to serve larger static files, images, videos etc. The download seems to be capped at around 550kB/s even over 100Mbit LAN. I tried other protocols (FTP/FTPS/FTP+ES/SCP/SMB), and they are all in the multi-megabyte range. The strangest thing is that, when using Apache with HTTPS instead of HTTP, it serves very fast, around 2.7MByte/s! I also tried the AnalogX SimpleWWW server just to test the plain HTTP speed of it, and it gave me a healthy 3.3Mbyte/s. I am at a total loss here. I searched the web, and tried to change the following Apache configuration directives in httpd.conf, one at a time, mostly to no avail at all: SendBufferSize 1048576 #(tried multiples of that too, up to 100Mbytes) EnableSendfile Off #(minor performance boost) EnableMMAP Off Win32DisableAcceptEx HostnameLookups Off #(default) I also tried to tune the following registry parameters, setting their values to 4194304 in decimal (they are REG_DWORD), and rebooting afterwards: HKLM\SYSTEM\CurrentControlSet\Services\AFD\Parameters\DefaultReceiveWindow HKLM\SYSTEM\CurrentControlSet\Services\AFD\Parameters\DefaultSendWindow Additionally, I tried to install mod_bw, which sets the event timer precision to 1ms, and allows for bandwidth throttling. According to some people it boosts static file serving performance when set to unlimited bandwidth for everybody. Unfortunately, it did nothing for me. So: AnalogX HTTP: 3300kB/s Gene6 FTPD, plain: 3500kB/s Gene6 FTPD, Implicit and Explicit SSL, AES256 Cipher: 1800-2000kB/s freeSSHD: 1100kB/s SMB shared folder: about 3000kB/s Apache HTTP, plain: 550kB/s Apache HTTPS: 2700kB/s Clients that were used in the bandwidth testing: Internet Explorer 8 (HTTP, HTTPS) Firefox 8 (HTTP, HTTPS) Chrome 13 (HTTP, HTTPS) Opera 11.60 (HTTP, HTTPS) wget under CygWin (HTTP, HTTPS) FileZilla (FTP, FTPS, FTP+ES, SFTP) Windows Explorer (SMB) Generally, transfer speeds are not too high, but that's because the server machine is an old quad Pentium Pro 200MHz machine with 2GB RAM. However, I would like Apache to serve at at least 2Mbyte/s instead of 550kB/s, and that already works with HTTPS easily, so I fail to see why plain HTTP is so crippled. I am using a Kerio Winroute Firewall, but no Throttling and no special filters peeking into HTTP traffic, just the plain Firewall functionality for blocking/allowing connections. The Apache error.log (Loglevel info) shows no warnings, no errors. Also nothing strange to be seen in access.log. I have already stripped down my httpd.conf to the bare minimum just to make sure nothing is interfering, but that didn't help either. If you have any idea, help would be greatly appreciated, since I am totally out of ideas! Thanks! Edit: I have now tried a newer Apache 2.2.21 to see if it makes any difference. However, the behaviour is exactly the same. Edit 2: KM01 has requested a sniff on the HTTP headers, so here comes the LiveHTTPHeaders output (an extension to Firefox). The Output is generated on downloading a single file called "elephantsdream_source.264", which is an H.264/AVC elementary video stream under an Open Source license. I have taken the freedom to edit the URL, removing folders and changing the actual servers domain name to www.mydomain.com. Here it is: LiveHTTPHeaders, Plain HTTP: http://www.mydomain.com/elephantsdream_source.264 GET /elephantsdream_source.264 HTTP/1.1 Host: www.mydomain.com User-Agent: Mozilla/5.0 (Windows NT 5.2; WOW64; rv:6.0.2) Gecko/20100101 Firefox/6.0.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: de-de,de;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip, deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Connection: keep-alive HTTP/1.1 200 OK Date: Wed, 21 Dec 2011 20:55:16 GMT Server: Apache/2.2.21 (Win32) mod_ssl/2.2.21 OpenSSL/0.9.8r PHP/5.2.17 Last-Modified: Thu, 28 Oct 2010 20:20:09 GMT Etag: "c000000013fa5-29cf10e9-493b311889d3c" Accept-Ranges: bytes Content-Length: 701436137 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/plain LiveHTTPHeaders, HTTPS: https://www.mydomain.com/elephantsdream_source.264 GET /elephantsdream_source.264 HTTP/1.1 Host: www.mydomain.com User-Agent: Mozilla/5.0 (Windows NT 5.2; WOW64; rv:6.0.2) Gecko/20100101 Firefox/6.0.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: de-de,de;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip, deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Connection: keep-alive HTTP/1.1 200 OK Date: Wed, 21 Dec 2011 20:56:57 GMT Server: Apache/2.2.21 (Win32) mod_ssl/2.2.21 OpenSSL/0.9.8r PHP/5.2.17 Last-Modified: Thu, 28 Oct 2010 20:20:09 GMT Etag: "c000000013fa5-29cf10e9-493b311889d3c" Accept-Ranges: bytes Content-Length: 701436137 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/plain

    Read the article

  • Does msmq how a interface in windows 2008?

    - by Michael
    Hi there, I've used MSMQ on a windows 2003 server before and noticed I could monitor the public and private queues. Does anyone know if you can do this on windows 2008 server? If so, how do I access it because I've search and can't find a way to monitor this. At least not from a GUI interface like before.

    Read the article

  • In what way does non-"full n-key rollover" hinder fast typists?

    - by Michael Kjörling
    Wikipedia claims (although the latter claim does not cite a source) that: High-end keyboards that provide full n-key rollover typically do so via a PS/2 interface as the USB mode most often used by operating systems has a maximum of only six keys plus modifiers that can be pressed at the same time.[4] This hinders fast typists, ... In what way would the system being able to recognize only six non-modifier keys at once hinder a fast typist? I consider myself a relatively fast typist and I usually press one key, plus modifiers, at once; I can't imagine any real-life situation in which the system only recognizing six non-modifier keys being pressed at once has been a limiting factor in my keyboard usage. (Multi-stroke keyboard shortcuts as used by high-end software like Visual Studio, Emacs and the like are a different matter.) Note that I am not really interested in answers centered around multiplayer computer games; I'm looking for answers that give reasons that would be relevant to typists, somehow supporting the statement made on Wikipedia.

    Read the article

  • All commands stopped working in centos 6.5

    - by Michael
    I have made a big mistake while removing some duplicate packages as it appears to be broken. yum 1036 rpm -e --nodeps glibc-2.12-1.132.el6_5.2.x86_64 1037 rpm -e --nodeps nscd-2.12-1.132.el6_5.2.x86_64 1038 rpm -e --nodeps glibc-common-2.12-1.132.el6_5.2.x86_64 1040 rpm -e --nodeps glibc-common-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6.x86_64 glibc-headers-2.12-1.132.el6.x86_64 1041 rpm -e glibc.x86_64 1042 rpm -e --nodeps glibc.x86_64 The issue happened after doing 1042 step. None of commands work(including yum, rpm, ls, cp etc) and getting error /lib64/ld-linux-x86-64.so.2: bad ELF interpreter: No such file or directory I thought that installing glibc after removing all the current ones would help to resolve the duplicate package error :( Now I realised that it is used as the C library in the GNU system and most systems with the Linux kernel. It defines the "system calls" and other basic facilities such as open, malloc, printf, exit, etc. Is there any possible solutions other than reinstall? I have lost ssh access. Maybe anything can be done using rescue cd? Thanks

    Read the article

  • Stop fail2ban stop/start notifications

    - by michael
    If the server is restarted, or even if fail2ban is stopped/start it sends a notification. [asterisk-iptables] enabled = true filter = asterisk action = iptables-allports[name=ASTERISK, protocol=all] sendmail-whois[name=ASTERISK, [email protected], [email protected]] logpath = /var/log/asterisk/messages maxretry = 5 bantime = 259200 Removing the sendmail-whois stops it, but it also stops the ban notifications, how can I get it to stop notifying me when the process starts/stops? Thanks

    Read the article

  • What is the difference between /sbin/nologin and /bin/false?

    - by Michael Hampton
    I have often heard it recommended that a user account should be disabled by setting its shell to /bin/false. But, on my existing Linux systems, I see that a great number of existing accounts (all of them service accounts) have a shell of /sbin/nologin instead. I see from the man page that /sbin/nologin prints a message to the user saying the account is disabled, and then exits. Presumably /bin/false would not print anything. I also see that /sbin/nologin is listed in /etc/shells, while /bin/false is not. The man page says that FTP will disable access for users with a shell not listed in /etc/shells and implies that other programs may do the same. Does that mean that somebody could FTP in with an account that has /sbin/nologin as its shell? What is the difference here? Which one of these should I use to disable a user account, and in what circumstances? What other effects does a listing in /etc/shells have?

    Read the article

  • Can a BIND server be a slave to a non-BIND master DNS server?

    - by Michael Neale
    If I have a master DNS that is not bind - can bind still slave to it? (ie does it use the DNS protocol or something else?). Kind of related - but do people still do this or do they use some other form of data replication to keep DNS records in sync to the slaves (ie file/database copying)? I would like to have the slaves refreshed as fast as possible so I am thinking normal slaving with is expiry/poll based might not be optimal?

    Read the article

  • Recover data from physically damaged harddrive. What are my options?

    - by Michael Kniskern
    I was trying to replace the power supply in my desktop PC and ended up physically damaging the data connection from the hard drive to the motherboard. The plastic shelf for the copper prongs on the hard drive broke into the cable. Here is a picture of my handy work: I went to Best Buy Geek Squad to discuss my options and they said that they will need to send it to the recover center it could cost anywhere between $250 to $1600 USD to recover the data out the hard drive Is this reasonable for data recovery from a physically damaged hard drive? Are there any other options I can explore? I am going to talk to the data doctors to see what my options are. Update I took the HD to Data Doctors, and they told me that the SATA connection was broken to they would need to replaced the data connector and then copy the data to a brand new hard drive. So, with the initial analysis, cost of replacement parts, and data recovery fee it came out to $865.00 USD. The technician specifically stated if this was an older hard drive that would just need to replace the data connector. But because there is specific information related to the individual hard drive in the flash ROM, they need to transfer the data to a brand new hard drive.

    Read the article

  • Is it Possible to Increase Display Resolution for OS X Maverick

    - by Michael
    The new OS X Maverick operating system has reduced maximum display resolution from 1920 x 1200 in Mountain Lion to 1680 x 1050, which is a SIZABLE reduction. The difference is obvious when viewing videos or photos. In addition, the colors are less vibrant. Does anyone know a way to change the display resolution for Maverick, thus restoring Mountain Lion resolution (1920 x 1200)...along with color vibrancy. By the way, I am using a 2012 Macbook Pro, with Matte display, which I think makes matters worse. At 1920 x 1200 my Macbook Pro was excellent...but at 1680 x 1050, it is very pedestrian.

    Read the article

  • Best free AVI to DVD converter

    - by Michael Kniskern
    I currently downloaded a bunch of AVI files of a popular show and when to make an DVD with multiple episodes that will play on any standard DVD player. What is the best free shareware or application to accomplish something like this? I am using Windows Vista 64 bit Home Premium.

    Read the article

  • Server Density or Scout-like Services for Windows?

    - by Michael Gorsuch
    Hi all. I've been very impressed with agent-based / SaaS-like monitoring services such as Scout and Server Density. They both provide very nice trending, alerting, and reporting capabilities for my *nix boxes, and I need to find something similar for Windows. Can anyone out there recommend such a tool? It is important that this tool is a centralized service in line with the aforementioned products, as the deployment environment is owned by a lean team with limited resources. Thanks!

    Read the article

  • Apache Prepending Header Information to ALL FILES

    - by Michael Robinson
    We're in the middle of setting up new servers, and have been having some odd problems with Apache. Apache is prepending text that looks like this: $15plðI‚‚?E?ðA™@?@??yeÔ|~Ÿ²?PγZ" zS€?8i³?? ,ÀŠ{ÿBHTTP/1.1 200 OK Date: Mon, 02 Feb 2009 22:28:05 GMT Server: Apache/2.2.3 (CentOS) Last-Modified: Mon, 02 Feb 2009 22:28:05 GMT ETag: W/"1238007d-2224e-fe617f40" Accept-Ranges: bytes Content-Length: 139854 Connection: close Content-Type: application/x-javascript To all files. The file I copied the above text from is the prototype library js file. As loaded from our server. I've searched, but couldn't find much about this problem Maybe I don't know what I'm searching for... Anyway, if anyone has seen this behaviour before, could they please let me know either 1) how to fix it so that this content is not prepended to all files, or 2) where to look for further help. Thanks

    Read the article

  • Configuring Nginx for Wordpress and Rails

    - by Michael Buckbee
    I'm trying to setup a single website (domain) that contains both a front end Wordpress installation and a single directory Ruby on Rails application. I can get either one to work successfully on their own, but can't sort out the configuration that would let me coexist. The following is my best attempt, but it results in all rails requests being picked up by the try_files block and redirected to "/". server { listen 80; server_name www.flickscanapp.com; root /var/www/flickscansite; index index.php; try_files $uri $uri/ /index.php; location ~ \.php$ { include fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/flickscansite$fastcgi_script_name; } passenger_enabled on; passenger_base_uri /rails; } An example request of the Rails app would be http://www.flickscan.com/rails/movies/upc/025192395925

    Read the article

  • I can access \\server via explorer but a program wont

    - by Michael Savage
    From ServerA I can access \\ServerB\Telephony\Files\abcdefgh.pdf using windows explorer. From the same ServerA when I try to access the same file on ServerB using a program (a program that imports files from csv file) I get "File Not Found" error. On \\ServerB\Telephony\ the Share is on and I added the service account that I used to log in to ServerA. I am clueless. Please suggest. (oh, it's a Windows 2008 R2 Server) (btw, I did try IP Address, FQDN but works with Explorer but CVS Importer wont read the path. At one time, I did get Access Denied but I dont get access denied anymore after adding the service account to the share. firewalls are off on the servers) Update: I go to My Computer Network I see many servers but ServerB is not in the list..

    Read the article

  • Complete Public Folder Migration from Exchange 2007 to Exchange 2010

    - by Michael Todd
    We were in the process of migrating from Exchange 2007 to Exchange 2010 and hit a brick wall when trying to migrate Public Folders. After resolving issues with connectivity (and another issue with an old Exchange 2003 server being listed in AD that was causing the replication to fail) it finally appeared that messages were migrating from one server to another. However, we appear to have jumped the gun and ran MoveAllReplicas before the process was complete. We are now stuck with about 210MB of public folders on the new server from a 7GB public folder store on the old server. The messages appear to be available on the old server since running get-publicfolderstatistics shows that there are messages available. We have waited several days for the move to continue but we are stuck at 210MB. Is there something we can do to complete the replication so that all of the messages move from the old server to the new server?

    Read the article

  • Is sending email from EC2 / Rackspace Cloud a bad idea?

    - by Michael Buckbee
    In this article it mentions that TrendMicro is now treating all emails from Amazon's EC2 as coming from "Dial Up Users": likely to be spam and this is creating severe deliverability issues with their emails. We're having all kinds of issues sending email from our app servers on Rackspace cloud (which may or may not be DUL'd) and I wonder if this isn't just a losing battle and we should try to get a different host for our SMTP server.

    Read the article

  • Vim - Displaying Code Output in a New Window á la Textmate?

    - by Michael Density
    A few months back I switched from Textmate to Vim. Overall I really love Vim, but one of the things I miss from Textmate is using the ⌘R command to run Ruby code and having the results neatly pop up in a new, scrollable window. Obviously, Vim is capable of running Ruby code and displaying the output with :w !ruby. The only downside to this is that if the resulting output is too long I can't scroll through it. To combat this problem I tried modifying a :redir function from Vim Tips. It looks like this: function! TabNew(cmd) redir => message silent execute a:cmd redir END tabnew silent put=message set nomodified endfunction command! -nargs=+ -complete=command TabNew call TabNew(<q-args>) Now the output from Ruby is put into a new tab. However, I can't get it to pop up in a new, separate window. Changing tabnew to new just sends the output to a split in the same window. The other problem is that a visible ^M gets appended to the end of each line, so the output ends up looking like this, which is kind of bothersome: Hello World!^M So, is there any way to get the output into a separate window without the ^M appended to the end? Are there any plugins I should be trying to achieve this Textmate-like effect for code output?

    Read the article

  • Lookup Active Directory entry by implicit UPN

    - by Michael-O
    In our company exists a forest-wide UPN suffix company.com and almost all user accounts have the explicit UPN set to [email protected]. This value is also set in the Active Directory userPrincipalName attribute. Now we have an application where users perform authentication through Kerberos. So we are given the Kerberos principal, i.e. implicit UPN. We'd like to look up that user and retrieve several LDAP attributes. Since iUPN and userPrincipalName do not match anymore, the lookup is not possible. Is there any "official" way to retrieve a mapping from the Active Direcory? My workaround is to perform a LDAP bind against the realm component and search for the sAMAccountName attribute which matches the user id component of the iUPN. Searching for the mere sAMAccountName in the forest is not possible because the value is unique in the domain only.

    Read the article

  • Convert PowerPoint to Flash or Silverlight?

    - by Michael Stum
    I have a simple PowerPoint presentation and I would like to convert it to Flash or Silverlight. The presentation is a simple "Slide after Slide after Slide" and my first guess was to use OpenOffice Impress. Sadly, the picture quality is awful. I would need the presentation to be in a specific format (900 Pixels wide and as high as it needs to be, usually 675 pixels) Can you recommend any good, simple PowerPoint = Flash or Silverlight converter that does that?

    Read the article

  • How can I safely close this window and forever avoid seeing similar pop-ups from Mackeeper Zeobit's malware and spyware?

    - by Michael Prescott
    The attached image shows a window that just popped up and the only button available is the OK button. I could Force quit Safari, but I've got several sites open right now and don't want to try and find my place again. Besides, I've seen similar hacks in the past and I'd like to learn how to handle them in a way better than just a brute force-quit. I've never heard of MacKeeper or Zeobit, so I opened Firefox and did a few searches while Safari is obviously still stuck, waiting for me to click the sneaky OK button in the dialog window. Anyhow, at least the first few pages of most search results contain lots of blabbering from questionable witnesses about how MacKeeper saved them from some malware or spyware. However, any company that is hacking the browser to maliciously install their product is itself the criminal and not providing a true security application. So, there are three questions here: How can I close this window? Can I do something to Safari to avoid these hacks in the future? (Just curious) Is MacKeeper or Zeobit somehow loading the search results so that no information about their application being malware or spyware is listed (I can't be the only person in the world that is offended by their tactics, even though it appears I am)?

    Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >