Search Results

Search found 5983 results on 240 pages for 'music on hold'.

Page 40/240 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• ESXi onboard SATA passthrough [on hold]

  - by lodge93

  I am running ESXi 5.5 on a home system. When I attempt to pass one of the onboard SATA controllers (Intel ICH10R) to a VM, it is successful. However, the controller never appears in the VM. What else am I missing that would cause a VM to not recognize the controller? Additional Info: The controller is set to AHCI mode in the BIOS Prior to setting up the controller for passthrough, ESXi did recognize the controller and the drives I have tried with multiple VMs, none of which recognized the controller or the attached drives I have two onboard SATA controllers, on controller for ESXi and one for passthrough The final ideal state is that I could passthrough the controller to a FreeNAS VM

  Read the article

• Minecraft server hosting hardware specifications [on hold]

  - by Andrew Wright

  I am planning on purchasing a server to rent off Minecraft game servers, largely to friends. I am planning on purchasing a 128GB RAM server to save on colocation costs (as I am likely to need more than 32GB and would have to rent 2U of space...) I am hoping for some advice about the processing power needed to deal with this level of RAM. The servers will be run in a shared environment on linux in a VM to make backups easier. The server I have in mind is dual CPU. I have been considering at the low end dual Xeon E5-2609V2 Quad-Core 2.5Ghz, and at the high end dual Xeon E5-2650V2 Eight-Core 2.6Ghz. The difference between these is 6.4 GT/s and 8 GT/s and £3000 for the lower spec server, £4300 for the higher spec. I was hoping I could get advice about whether it is worth paying for the extra/higher speed processor or if I would be wasting my money? Thank you for any help - I appreciate that this is not directly related to professional system administration.

  Read the article

• Hosting-why should I pay? [on hold]

  - by user196919

  Can I avoid, eliminate or neutralize propagation? Hours of research for a first-time unregistered domain returned the usual suspects ("Oneandblank", "GoBlanky", "BlankCow", "HostBlank-or" and others)all with 24-72hr or more. Would a roll-your-own, inhouse SHO Linux/Winserver box help? Thank you so much! edit; navigating SF for my first time I now notice the "professionals" air and feel to the comments. Although I feel justified for being here(armed with directly relevant, well-rounded knowledge/proficiency/experience)I apologize for diving in headlong without proper post etiquette or correct placement. I envy each of you and hope to gain my own inviolable foothold in the coming years.

  Read the article

• Use SSH reverse tunnel to bypass VPN [on hold]

  - by John J. Camilleri

  I have shell access to a server M, but I need to log into a VPN on my machine L in order to access it. I want to be able to get around this VPN, and I've heard I can do this by creating a reverse SSH tunnel and using a intermediate server E (which I can access without the VPN). This is what I am trying: Turn on VPN on L, open SSH session to M On M, execute the command: ssh -f -N -T -R 22222:localhost:22 user@E From L, try to open SSH session to E on port 22222, hoping to end up at M Step 2 seems to work without any complaint, but on step 3 I keep getting "connection refused". I have made sure that port 22222 is open on E: 7 ACCEPT tcp -- anywhere anywhere tcp dpt:22222 I'm pretty new to SSH tunnelling and not sure what the problem could be. Any ideas what I can try?

  Read the article

• Online FTP or file sharing service [on hold]

  - by Frede

  We need to share large files with clients, e.g. clients upload a large file, we modify it and later make it available for download. Up until now we've used FTP but this has a number of drawbacks. A lot of management of files and setting up accounts etc. We are therefore considering online alternatives. Requirements: Cheap, 8-) Easy to use, ideally just requiring a web browser, but also possible for power users to connect e.g. via FTPS/SFTP No registration requried for users to upload/download files. We ourselves of course need to be able to login an view uploaded files and upload new files. No per user fee High bandwidth. As files may be GBs in size both upload and download speed cannot be too slow Secure. Encryption during upload/download. No way for users to access uploaded files. Once a user has uploaded a file they (or anyone else besides us) should be able to access the file. To download files users get a link with a password. Ideally the link expires after a set time. No software installation We do NOT need any sync features, backup, versioning etc. Just a quick, easy, secure way for us to share files with our clients. Services like JustCloud, DriveHQ etc seems bloated and "too much" for what we need. What other alternatives exist? Thanks!

  Read the article

• Excel VLOOKUP using results from a formula as the lookup value [on hold]

  - by Rick Deemer

  I have a cell that I must remove the first 2 characters "RO" for each value in a column on a sheet called RAW DATA and put into a cell on a sheet called ROSS DATA. Some of the values in that cell have 3 digits after the "RO", and some have 5 digits. To do that I used =REPLACE('RAW DATA'!A3,1,2,"") Then I need to use this new resultant string as the lookup value in a VLOOKUP. The VLOOKUP will be looking at a named range called DAP on a sheet called DAP, in column 5 for an exact match, and I need it to return that value to the cell. I have tried using INDIRECT in different ways to no avail, and I'm not sure that I fully understand its usage. So at this point I am Googling for a method to do this and at a standstill.

  Read the article

• Arcemu Wow 3.3.5 sql error [on hold]

  - by user3691628

  I'm trying to set up a private arcemu 3.3.5 wow server to play with my 3 friends, but after I did all things great, I get this annoying error: [05-30-2014][15:14][Arcemu][2014-05-30 15:14:16] [05-30-2014][15:14][Arcemu]ArcEmu 4.0-TRUNK a816536/Debug-Win32-X86 :: World Server [05-30-2014][15:14][Arcemu]Sql query failed due to [Table 'logon.world_db_version' doesn't exist], Query: [SELECT LastUpdate FROM world_db_version;] [05-30-2014][15:14][Arcemu]Database: World database is missing the table `world_db_version` OR the table doesn't contain any rows. Can't validate database version. Exiting. [05-30-2014][15:14][Arcemu]Database: You may need to update your database Please help me guys, I really worked 4 hours to make this server good and now this error make me desperate... I tried to run the lattest update for world_db_version. Ask me if you need something else.

  Read the article

• /etc/hosts in Windows 8.1 doesnt work like in Windows 7 [on hold]

  - by user225438

  Last time when i installed Win7, i configured it to block some netbios names in LAN with hosts file. Something like this: 192.168.0.10 computer_name 192.168.0.10 computer_IP where 192.168.0.10 some ip-address in network, where user need to login to access it. So, when user trying to access computer_name via \\computer_name, he will redirect to 192.168.0.10 rather then going to computer_name. In Windows 8.1 I can't do this trick. I tried to disable Windows Defender, flushed DNS, nbtstat -R. Nothing works. When I pinging computer_name, IP address returning 192.168.0.10, but when I accessing it via explorer (\\computer_name\d$), it opening computer partitions. In Win7, when I trying to access \\computer_name, its trying to open 192.168.0.10 one. Maybe its not the best solution to do this, but it works in Windows 7.

  Read the article

• Setting domain name to web application [on hold]

  - by aditk

  I have a website and I have kept the structure to be: Website Web Application 1 Web Application 2 Now, I want to access my website at example.com and access web applications using webapp1.example.com or webapp2.example.com; I have a control panel for my domain name from where I have set up a “web forward” to my server. From what I have done, I am getting to see my IP address when I type in domain name. Yes, I have disabled cloaking here! How I would like it to be is, when I access example.com and then navigate to other pages, they should be shown in the address bar, e.g. http://example.com/firstpage.aspx and so forth. Is the structure I have set up a good one?

  Read the article

• Speedup of fixing an openssl bug with 8192 bit key [on hold]

  - by rubo77

  This is related to this Bug-Report https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=747453 OpenSSL contains a set of arbitrary limitations on the size of accepted key parameters that make unrelated software fail to establish secure connections. The problem was found while debugging a XMPP s2s connection issue where two servers with long certificate keys (8192 Bit RSA) failed to establish a secure connection because OpenSSL rejected the handshake. This seems to be a small problem to be fixed but although there is an easy patch available to fix the issue in that bug report, no reactions are noticed so far.. The last patch that broke the 2048 barrier took 2 years to be implemented and only resulted in an increase to 4096bit, which seems to be a bad joke. Where would we have to report this to speed up the implementation for such an issue?

  Read the article

• apple adress book mass email [on hold]

  - by Thijser

  I have been asked to help a small non profit organasation with some IT problems. They currently have a mailing list of around 200 people saved on a mac inside adres book. Now currently these people are send emails in groups of around 20 as the standard apple email program does not allow more. I know that there are programs that can be used to send email to a larger number of people however these usually require a database and I'm not sure how to use those. Anybody got any tips?

  Read the article

• CentOS and OpenSSH [on hold]

  - by Stephen

  I've recently installed CentOS 6 on an old Dell PC. I'm trying to setup OpenSSH at the moment, I been following some tutorials (http://www.youtube.com/watch?v=QKafb0koJEg) on You Tube, while they have been very helpful I'm at the point where I need to ask some questions. My goal here is to be able to access the server from my work computer and from my personal laptop (which will be on the same home network as the server). I've installed OpenSSH with no issues. So the first thing I was advised to do was port forwarding. So in the sshd_config file, I've changed Port 22 to Port xxxx (where xxxx is a obviously a four digit value). I then restart the sshd service. I've also configured my router for forward port 22 onto xxxx. Is there anything else I need to do? I've generated the keys on my laptop, and I'm trying to copy them to the server as follows: scp id_rsa.pub xxxxxxxx@localhost:.ssh/authorized_keys but this command fails with the following error message: ssh: connect to host localhost port 22: Connection refused lost connection Any help appreciated. Regards...

  Read the article

• Postfix sendmail bypass restrictions [on hold]

  - by EnEli

  I have setup a postfix/dovecot mail server and all thing work fine! BUT: I use virtual mailboxes and when you try to send a mail to a non existent mailbox via telnet postfix will punch you... But if you use sendmail, all restricitons are bypassed... This is bad becuase dovecot does not know what to do with this mail! It will stay in the queue for ever... How can I force sendmail to use normal smtp?

  Read the article

• Security against IP spoofing [on hold]

  - by user1369975

  I am pursuing a college project, in which I am running three fake services on three ports to protect the main service (say running at port 80). The concept is that if the user is malicious, he'll try to bring the services down and access the fake services. These ports adopt a blocking process of a connection request and record the IP and port of the client. These are logged and aren't granted access on service on port 80. But what to do if the client spoofs his IP? How can I modify my system?

  Read the article

• Installing XAMPP on a live server [on hold]

  - by Eeeearth

  I am trying to get phpMyAdmin on my live server so I can do database programming on a live server rather than a local one. I have 2 servers at the moment, one through 1&1 which is a Windows Server 2008 and through RAM-Host which is running CentOS. I am just trying to figure out what I need to do to install XAMPP on the LIVE server, as opposed to accessing through localhost, for obvious reasons. Do I install XAMPP the same way I did on my local, but on my server? Essentially I would like to access the phpmyadmin via: mydomain.com/phpmyadmin, just as I would locally using localhost/phpmyadmin. Again, sorry for any ignorance here I just can not find any information on what to do for this.

  Read the article

• Error configuring virtual hosts with Apache on Windows 8 [on hold]

  - by rushd

  I can't get virtual host to work on my Windows 8. I restart, stop, start Apache, but I get a popup dialog that says: The requested operation has failed! I know it's the line that produces the error, but how can I enable vhost if I don't uncomment the line in httpd.conf? # Virtual hosts Include conf/extra/httpd-vhosts.conf The only thing I did was edited C:\Apache24\conf\httpd.conf by removing the comment on Include conf/extra/httpd-vhosts.conf and edited the file located in C:\Apache24\conf\extra\httpd-vhost.conf. Apache is installed in C:\Apache24 Directory I want to use for Virtual Host is located at C:\Users\TomCODE\brainprojects My vhost.conf looks like this: <VirtualHost *:80> ServerAdmin [email protected] ServerName brain.local DocumentRoot "C:/Users/TomCODE/brainprojects" ErrorLog "logs/brain.local-error.log" CustomLog "logs/local.local-access.log" common </VirtualHost> My hosts file: 127.0.0.1 brain.local I downloaded the file httpd-2.4.9-win64-VC11 from Apache Lounge.

  Read the article

• File gone or altered after MySQL[HY000][2002] error [on hold]

  - by Psyberion

  I'm working on a rather small project, and today I got an SQLSTATE[HY000][2002]:Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' error. After a bit of googling and a few attempts to restart the mysqld service, I gave up and tried rebooting the computer. This did the trick, MySQL was now running fine. I did, however, get a more serious issue: Some files were missing, others were altered. Also, a few posts in the MySQL was gone. It's really strange, it's like the whole project has been reset two or three days, and I have no clue why. Some additional details about this: I save my files after every line of code. I'm religious about this. So I haven't lost the files that way. I was accessing the server via SSH when the error occurred, so I did the programming and the reboot over SSH. The server is a Raspberry Pi, model B, with Raspian on which I run Apache2. I was viewing the site and had an active session when I rebooted the system. The pages I lost did work just before this all happened. The MySQL fault occurred when I tried to add a text NOT NULL column to a table which had entries. Now, the amount of lost work isn't really that much, so I'm not really looking for help recovering the files. The reason I'm posting this is because I wonder how did this happen, and why?

  Read the article

• permanently mount multiple directories from different disks under root [on hold]

  - by piotrek

  I have SSD and HDD. Some directories like /var /srv /tmp should be on hdd while /boot /usr /lib on ssd. But do I have to create separate partition for every single directory? i want to have 2 or so partitions. one for each disk and distribute directories as needed. is it possible? and how? i've heard about symlinks, mount --bind, mhddfs but: symlinks are treated differently by tools like cp so i'm not sure if it's safe to have main system directories symlinked i have no idea how can I use mount --bind or mhddfs in fstab

  Read the article

• Setting up a reverse proxy [on hold]

  - by mrwooster

  I am looking for the best solution for setting up a very low maintenance reverse proxy for a production website (example.com). The setup is as follows: A blog with will be hosted on heroku, and will reside at example.com/blog A static info page which will be hosted on S3 and will reside at example.com/signup A dynamic content management system, provided and hosted by an external vendor which will respond to requests for any other pages. The two solutions which come to mind are: Use HAProxy Ask the external vendor to reverse proxy requests for /blog and /signup The obvious solution would be to use HAProxy, but, if at all possible, I would like to avoid having to setup and maintain another server (especially such a critical one). I came across a company called Snapt which offers hosted HAProxy solutions, but its more geared towards load-balancing than reverse proxying. Option 2 is a possibility, but gives us very little control over changes and configuration. I see a lot of sites hosting blogs on /blog so this must be fairly common practice, am I missing an obvious solution?

  Read the article

• HIGH CPU USAGE FROM SUSTEM [on hold]

  - by user195641

  CAN ANYONE EXPLAIN THIS ? IT IS BAD FOR MY CPU ? CAN ANYONE HELP ME ? I DONT KNOW WHAT TO DO ! THERE IS HIGH DELAY WHEN I OPEN A NEW TASK HOWEVER ITS A INTEL CORE DUO EXTREAMA 3.0GH THANKS There are about 100 items monitored with the agent. They are also monitored on other identical hosts where Zabbix agent does not consume so much of CPU. Agents send collected data to Zabbix proxy. The agent configuration is default. The host CPU has 8 cores (2.4 Gz). The smallest time value for monitored items is 60 seconds.

  Read the article

• VPN instead of KVM over IP? [on hold]

  - by Blazer

  I have a server colocated on datacenter.CentOS operating system. They use KVM-ip when I need remote hands. Somoene told me that login using that will allow administrators (if they want) to get disk encryption password or ssh root pass via KVM-ip(is that true ?). Someone told me I can use VPN to login to my server instead of kvm over ip. Anyone have experience with that ? Is that option valid ? Thank you

  Read the article

• Fastest Memory (within reason) for a MotherBoard [on hold]

  - by sampson

  I was wondering if it would be OK to use DDR3 3000 memory with Asus Maximus VI Impact MotherBoard, Intel® Core™ i3-4130T Processor and Steamcom's FC8 case The purpose of this machine is for a HTPC (Home Theater Personal Computer) system, only, no gaming. The case is fan less as is the CPU cooling system. Also, would it be worth it, heat wise, to go past the 1600 memory type? I mean, would DDR 3000 make the box that much faster to make it worthwhile? The Processor has a TDP rating of 35 W. The memory specifications for the processor are: Memory Specifications Max Memory Size (dependent on memory type) 32 GB Memory Types DDR3-1333/1600 # of Memory Channels 2 Max Memory Bandwidth 25.6 GB/s ECC Memory Supported ‡ Yes The FC8 case's heat displacement system is rated at 95 W TDP

  Read the article

• is Drupal good business POS [on hold]

  - by mavili

  I've got to work on a POS-type web application for a money transfer, shipping, and other customer services like translation and help-out charges. I was planning to do that in pure PHP without frameworks or CMS's, but then Drupal came into play and I'm wondering if I should learn Drupal and do the app with it. My question is, is Drupal good for such a work, and if it is will it take me more than a week to learn enough to make it possible? For info, I'm a decent PHP programmer.

  Read the article

• Mavericks Server Hardware suggestion [on hold]

  - by crystalWing

  I am an application developer in a small company. Recently, my boss asked me to setup a server for another company owned by him. He has 2 latest MAC PRO and he can provide me any hardware I want. He listed the following requirements: Failover is a must Should be capable to handle 20 vpn connections at the same time RAID 5 Remote Copy of backup data to different loaction I know this is a generic question that I shuoldn't ask here, but I really need help because comparing to Linux and MS server. There are not many resources available online. I read the APPLE PRO TRAINING book but it tells nothing about the above requirements.

  Read the article

• My server hostname doesn't work? [on hold]

  - by xSpartanCx

  I've got a raspberry pi running raspbian server edition. It's a modified debian that runs well on the rPi. My problem is that the only way I can ssh into it with putty is through the static ip. My router doesn't recognize the hostname; it shows the mac address as the name. This causes the pi not to show my website online (I think). The only way I've gotten it to work is using my other linux server to forward using virtual hosts, and that has to use the ip address, too. However, now that I have my other server off, the website doesn't work and I can't ssh (or find it anywhere on the network) using the hostname.

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >