patrick j collins - Page 40

Announcing Solaris Technical Track at NLUUG Spring Conference on Operating Systems

- by user9135656

The Netherlands Unix Users Group (NLUUG) is hosting a full-day technical Solaris track during its spring 2012 conference. The official announcement page, including registration information can be found at the conference page.This year, the NLUUG spring conference focuses on the base of every computing platform; the Operating System. Hot topics like Cloud Computing and Virtualization; the massive adoption of mobile devices that have their special needs in the OS they run but that at the same time put the challenge of massive scalability onto the internet; the upspring of multi-core and multi-threaded chips..., all these developments cause the Operating System to still be a very interesting area where all kinds of innovations have taken and are taking place.The conference will focus specifically on: Linux, BSD Unix, AIX, Windows and Solaris. The keynote speech will be delivered by John 'maddog' Hall, infamous promotor and supporter of UNIX-based Operating Systems. He will talk the audience through several decades of Operating Systems developments, and share many stories untold so far. To make the conference even more interesting, a variety of talks is offered in 5 parallel tracks, covering new developments in and also collaboration between Linux, the BSD's, AIX, Solaris and Windows. The full-day Solaris technical track covers all innovations that have been delivered in Oracle Solaris 11. Deeply technically-skilled presenters will talk on a variety of topics. Each topic will first be introduced at a basic level, enabling visitors to attend to the presentations individually. Attending to the full day will give the audience a comprehensive overview as well as more in-depth understanding of the most important new features in Solaris 11.NLUUG Spring Conference details:* Date and time: When : April 11 2012 Start: 09:15 (doors open: 8:30) End : 17:00, (drinks and snacks served afterwards)* Venue: Nieuwegein Business Center Blokhoeve 1 3438 LC Nieuwegein The Nederlands Tel : +31 (0)30 - 602 69 00 Fax : +31 (0)30 - 602 69 01 Email : [email protected] Route : description - (PDF, Dutch only)* Conference abstracts and speaker info can be found here.* Agenda for the Solaris track: Note: talks will be in English unless marked with 'NL'.1. Insights to Solaris 11 Joerg Moellenkamp - Solaris Technical Specialist Oracle Germany2. Lifecycle management with Oracle Solaris 11 Detlef Drewanz - Solaris Technical Specialist Oracle Germany3. Solaris 11 Networking - Crossbow Project Andrew Gabriel - Solaris Technical Specialist Oracle UK4. ZFS: Data Integrity and Security Darren Moffat - Senior Principal Engineer, Solaris Engineering Oracle UK5. Solaris 11 Zones and Immutable Zones (NL) Casper Dik - Senior Staff Engineer, Software Platforms Oracle NL6. Experiencing Solaris 11 (NL) Patrick Ale - UNIX Technical Specialist UPC Broadband, NLTalks are 45 minutes each.There will be a "Solaris Meeting point" during the conference where people can meet-up, chat with the speakers and with fellow Solaris enthousiasts, and where live demos or other hands-on experiences can be shared.The official announcement page, including registration information can be found at the conference page on the NLUUG website. This site also has a complete list of all abstracts for all talks.Please register on the NLUUG website.

Read the article

Thread.Interrupt Is Evil

- by Alois Kraus

Recently I have found an interesting issue with Thread.Interrupt during application shutdown. Some application was crashing once a week and we had not really a clue what was the issue. Since it happened not very often it was left as is until we have got some memory dumps during the crash. A memory dump usually means WindDbg which I really like to use (I know I am one of the very few fans of it). After a quick analysis I did find that the main thread already had exited and the thread with the crash was stuck in a Monitor.Wait. Strange Indeed. Running the application a few thousand times under the debugger would potentially not have shown me what the reason was so I decided to what I call constructive debugging. I did create a simple Console application project and try to simulate the exact circumstances when the crash did happen from the information I have via memory dump and source code reading. The thread that was crashing was actually MS code from an old version of the Microsoft Caching Application Block. From reading the code I could conclude that the main thread did call the Dispose method on the CacheManger class which did call Thread.Interrupt on the cache scavenger thread which was just waiting for work to do. My first version of the repro looked like this static void Main(string[] args) { Thread t = new Thread(ThreadFunc) { IsBackground = true, Name = "Test Thread" }; t.Start(); Console.WriteLine("Interrupt Thread"); t.Interrupt(); } static void ThreadFunc() { while (true) { object value = Dequeue(); // block until unblocked or awaken via ThreadInterruptedException } } static object WaitObject = new object(); static object Dequeue() { object lret = "got value"; try { lock (WaitObject) { } } catch (ThreadInterruptedException) { Console.WriteLine("Got ThreadInterruptException"); lret = null; } return lret; } I do start a background thread and call Thread.Interrupt on it and then directly let the application terminate. The thread in the meantime does plenty of Monitor.Enter/Leave calls to simulate work on it. This first version did not crash. So I need to dig deeper. From the memory dump I did know that the finalizer thread was doing just some critical finalizers which were closing file handles. Ok lets add some long running finalizers to the sample. class FinalizableObject : CriticalFinalizerObject { ~FinalizableObject() { Console.WriteLine("Hi we are waiting to finalize now and block the finalizer thread for 5s."); Thread.Sleep(5000); } } class Program { static void Main(string[] args) { FinalizableObject fin = new FinalizableObject(); Thread t = new Thread(ThreadFunc) { IsBackground = true, Name = "Test Thread" }; t.Start(); Console.WriteLine("Interrupt Thread"); t.Interrupt(); GC.KeepAlive(fin); // prevent finalizing it too early // After leaving main the other thread is woken up via Thread.Abort // while we are finalizing. This causes a stackoverflow in the CLR ThreadAbortException handling at this time. } With this changed Main method and a blocking critical finalizer I did get my crash just like the real application. The funny thing is that this is actually a CLR bug. When the main method is left the CLR does suspend all threads except the finalizer thread and declares all objects as garbage. After the normal finalizers were called the critical finalizers are executed to e.g. free OS handles (usually). Remember that I did call Thread.Interrupt as one of the last methods in the Main method. The Interrupt method is actually asynchronous and does wake a thread up and throws a ThreadInterruptedException only once unlike Thread.Abort which does rethrow the exception when an exception handling clause is left. It seems that the CLR does not expect that a frozen thread does wake up again while the critical finalizers are executed. While trying to raise a ThreadInterrupedException the CLR goes down with an stack overflow. Ups not so nice. Why has this nobody noticed for years is my next question. As it turned out this error does only happen on the CLR for .NET 4.0 (x86 and x64). It does not show up in earlier or later versions of the CLR. I have reported this issue on connect here but so far it was not confirmed as a CLR bug. But I would be surprised if my console application was to blame for a stack overflow in my test thread in a Monitor.Wait call. What is the moral of this story? Thread.Abort is evil but Thread.Interrupt is too. It is so evil that even the CLR of .NET 4.0 contains a race condition during the CLR shutdown. When the CLR gurus can get it wrong the chances are high that you get it wrong too when you use this constructs. If you do not believe me see what Patrick Smacchia does blog about Thread.Abort and List.Sort. Not only the CLR creators can get it wrong. The BCL writers do sometimes have a hard time with correct exception handling as well. If you do tell me that you use Thread.Abort frequently and never had problems with it I do suspect that you do not have looked deep enough into your application to find such sporadic errors.

Read the article

NDepend Evaluation: Part 3

- by Anthony Trudeau

NDepend is a Visual Studio add-in designed for intense code analysis with the goal of high code quality. NDepend uses a number of metrics and aggregates the data in pleasing static and active visual reports. My evaluation of NDepend will be broken up into several different parts. In the first part of the evaluation I looked at installing the add-in. And in the last part I went over my first impressions including an overview of the features. In this installment I provide a little more detail on a few of the features that I really like. Dependency Matrix The dependency matrix is one of the rich visual components provided with NDepend. At a glance it lets you know where you have coupling problems including cycles. It does this with number indicating the weight of the dependency and a color-coding that indicates the nature of the dependency. Green and blue cells are direct dependencies (with the difference being whether the relationship is from row-to-column or column-to-row). Black cells are the ones that you really want to know about. These indicate that you have a cycle. That is, type A refers to type B and type B also refers to Type A. But, that’s not the end of the story. A handy pop-up appears when you hover over the cell in question. It explains the color, the dependency, and provides several interesting links that will teach you more than you want to know about the dependency. You can double-click the problem cells to explode the dependency. That will show the dependencies on a method-by-method basis allowing you to more easily target and fix the problem. When you’re done you can click the back button on the toolbar. Dependency Graph The dependency graph is another component provided. It’s complementary to the dependency matrix, but it isn’t as easy to identify dependency issues using the window. On a positive note, it does provide more information than the matrix. My biggest issue with the dependency graph is determining what is shown. This was not readily obvious. I ended up using the navigation buttons to get an acceptable view. I would have liked to choose what I see. Once you see the types you want you can get a decent idea of coupling strength based on the width of the dependency lines. Double-arrowed lines are problematic and are shown in red. The size of the boxes will be related to the metric being displayed. This is controlled using the Box Size drop-down in the toolbar. Personally, I don’t find the size of the box to be helpful, so I change it to Constant Font. One nice thing about the display is that you can see the entire path of dependencies when you hover over a type. This is done by color-coding the dependencies and dependants. It would be nice if selecting the box for the type would lock the highlighting in place. I did find a perhaps unintended work-around to the color-coding. You can lock the color-coding in by hovering over the type, right-clicking, and then clicking on the canvas area to clear the pop-up menu. You can then do whatever with it including saving it to an image file with the color-coding. CQL NDepend uses a code query language (CQL) to work with your code just like it was a database. CQL cannot be confused with the robustness of T-SQL or even LINQ, but it represents an impressive attempt at providing an expressive way to enumerate and interrogate your code. There are two main windows you’ll use when working with CQL. The CQL Query Explorer allows you to define what queries (rules) are run as part of a report – I immediately unselected rules that I don’t want in my results. The CQL Query Edit window is where you can view or author your own rules. The explorer window is pretty self-explanatory, so I won’t mention it further other than to say that any queries you author will appear in the custom group. Authoring your own queries is really hard to screw-up. The Intellisense-like pop-ups tell you what you can do while making composition easy. I was able to create a query within two minutes of playing with the editor. My query warns if any types that are interfaces don’t start with an “I”. WARN IF Count > 0 IN SELECT TYPES WHERE IsInterface AND !NameLike “I” The results from the CQL Query Edit window are immediate. That fact makes it useful for ad hoc querying. It’s worth mentioning two things that could make the experience smoother. First, out of habit from using Visual Studio I expect to be able to scroll and press Tab to select an item in the list (like Intellisense). You have to press Enter when you scroll to the item you want. Second, the commands are case-sensitive. I don’t see a really good reason to enforce that. CQL has a lot of potential not just in enforcing code quality, but also enforcing architectural constraints that your enterprise has defined. Up Next My next update will be the final part of the evaluation. I will summarize my experience and provide my conclusions on the NDepend add-in. ** View Part 1 of the Evaluation ** ** View Part 2 of the Evaluation ** Disclaimer: Patrick Smacchia contacted me about reviewing NDepend. I received a free license in return for sharing my experiences and talking about the capabilities of the add-in on this site. There is no expectation of a positive review elicited from the author of NDepend.

Read the article

A Bite With No Teeth–Demystifying Non-Compete Clauses

- by D'Arcy Lussier

*DISCLAIMER: I am not a lawyer and this post in no way should be considered legal advice. I’m also in Canada, so references made are to Canadian court cases. I received a signed letter the other day, a reminder from my previous employer about some clauses associated with my employment and entry into an employee stock purchase program. So since this is in effect for the next 12 months, I guess I’m not starting that new job tomorrow. I’m kidding of course. How outrageous, how presumptuous, pompous, and arrogant that a company – any company – would actually place these conditions upon an employee. And yet, this is not uncommon. Especially in the IT industry, we see time and again similar wording in our employment agreements. But…are these legal? Is there any teeth behind the threat of the bite? Luckily, the answer seems to be ‘No’. I want to highlight two cases that support this. The first is Lyons v. Multari. In a nutshell, Dentist hires younger Dentist to be an associate. In their short, handwritten agreement, a non-compete clause was written stating “Protective Covenant. 3 yrs. – 5mi” (meaning you can’t set up shop within 5 miles for 3 years). Well, the young dentist left and did start an oral surgery office within 5 miles and within 3 years. Off to court they go! The initial judge sided with the older dentist, but on appeal it was overturned. Feel free to read the transcript of the decision here, but let me highlight one portion from section [19]: The general rule in most common law jurisdictions is that non-competition clauses in employment contracts are void. The sections following [19] explain further, and discuss Elsley v. J.G. Collins Insurance Agency Ltd. and its impact on Canadian law in this regard. The second case is Winnipeg Livestock Sales Ltd. v. Plewman. Desmond Plewman is an auctioneer, and worked at Winnipeg Livestock Sales. Part of his employment agreement was that he could not work for a competitor for 18 months if he left the company. Well, he left, and took up an important role in a competing company. The case went to court and as with Lyons v. Multari, the initial judge found in favour of the plaintiffs. Also as in the first case, that was overturned on appeal. Again, read through the transcript of the decision, but consider section [28]: In other words, even though Plewman has a great deal of skill as an auctioneer, Winnipeg Livestock has no proprietary interest in his professional skill and experience, even if they were acquired during his time working for Winnipeg Livestock. Thus, Winnipeg Livestock has the burden of establishing that it has a legitimate proprietary interest requiring protection. On this key question there is little evidence before the Court. The record discloses that part of Plewman’s job was to “mingle with the … crowd” and to telephone customers and prospective customers about future prospects for the sale of livestock. It may seem reasonable to assume that Winnipeg Livestock has a legitimate proprietary interest in its customer connections; but there is no evidence to indicate that there is any significant degree of “customer loyalty” in the business, as opposed to customers making choices based on other considerations such as cost, availability and the like. So are there any incidents where a non-compete can actually be valid? Yes, and these are considered “exceptional” cases, meaning that the situation meets certain circumstances. Michael Carabash has a great blog series discussing the above mentioned cases as well as the difference between a non-compete and non-solicit agreement. He talks about the exceptional criteria: In summary, the authorities reveal that the following circumstances will generally be relevant in determining whether a case is an “exceptional” one so that a general non-competition clause will be found to be reasonable: - The length of service with the employer. - The amount of personal service to clients. - Whether the employee dealt with clients exclusively, or on a sustained or recurring basis. - Whether the knowledge about the client which the employee gained was of a confidential nature, or involved an intimate knowledge of the client’s particular needs, preferences or idiosyncrasies. - Whether the nature of the employee’s work meant that the employee had influence over clients in the sense that the clients relied upon the employee’s advice, or trusted the employee. - If competition by the employee has already occurred, whether there is evidence that clients have switched their custom to him, especially without direct solicitation. - The nature of the business with respect to whether personal knowledge of the clients’ confidential matters is required. - The nature of the business with respect to the strength of customer loyalty, how clients are “won” and kept, and whether the clientele is a recurring one. - The community involved and whether there were clientele yet to be exploited by anyone. I close this blog post with a final quote, one from Zvulony & Co’s blog post on this subject. Again, all of this is not official legal advice, but I think we can see what all these sources are pointing towards. To answer my earlier question, there’s no teeth behind the threat of the bite. In light of this list, and the decisions in Lyons and Orlan, it is reasonably certain that in most employment situations a non-competition clause will be ineffective in protecting an employer from a departing employee who wishes to compete in the same business. The Courts have been relatively consistent in their position that if a non-solicitation clause can protect an employer’s interests, then a non-competition clause is probably unreasonable. Employers (or their solicitors) should avoid the inclination to draft restrictive covenants in broad, catch-all language. Or in other words, when drafting a restrictive covenant – take only what you need! D

Read the article

Populate Multiple PDFs

- by gmcalab

I am using itextsharp to populate my PDFs. I have no issues with this. Basically what I am doing is getting the PDF and populating the fields in memory then passing back the MemoryStream to be displayed on a webpage. All this is working with a single document PDF. What I am trying to figure out now, is merging multiple PDFs into one MemoryStream. The part I cant figure out is, the documents I am populating are identical. So for example, I have a List<Person> that contains 5 persons. I want to fill out a PDF for each person and merge them all into one, in memory. Bare in mind I am going to fill out the same type of document for each person. The problem I am getting is that when I try to add a second copy of the same PDF to be filled out for the second iteration, it just overwrites the first populated PDF, since it's the same document, therefore not adding a second copy for the second Person at all. So basically if I had the 5 people, I would end up with a single page with the data of the 5th person, instead of a PDF with 5 like pages that contain the data of each person respectively. Here's some code... MemoryStream ms = ms = new MemoryStream(); PdfReader docReader = null; PdfStamper Stamper = null; List<Person> persons = new List<Person>() { new Person("Larry", "David"), new Person("Dustin", "Byfuglien"), new Person("Patrick", "Kane"), new Person("Johnathan", "Toews"), new Person("Marian", "Hossa") }; try { // Iterate thru all persons and populate a PDF for each foreach(var person in persons){ PdfCopyFields Copier = new PdfCopyFields(ms); Copier.AddDocument(GetReader("Person.pdf")); Copier.Close(); docReader = new PdfReader(ms.ToArray()); Stamper = new PdfStamper(docReader, ms); AcroFields Fields = Stamper.AcroFields; Fields.SetField("FirstName", person.FirstName); } }catch(Exception e){ // handle error }finally{ if (Stamper != null) { Stamper.Close(); } if (docReader != null) { docReader.Close(); } }

Read the article

Error in connecting Eclipse to SQL Server

- by user3721900

This is the syntax error Jun 10, 2014 5:15:51 PM org.apache.catalina.core.AprLifecycleListener init INFO: The APR based Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files (x86)\Java\jre7\bin;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:/Program Files (x86)/Java/jre7/bin/client;C:/Program Files (x86)/Java/jre7/bin;C:/Program Files (x86)/Java/jre7/lib/i386;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files (x86)\Intel\iCLS Client\;C:\Program Files\Intel\iCLS Client\;C:\Program Files (x86)\AMD APP\bin\x86_64;C:\Program Files (x86)\AMD APP\bin\x86;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files\Microsoft\Web Platform Installer\;C:\Program Files (x86)\Microsoft ASP.NET\ASP.NET Web Pages\v1.0\;C:\Program Files (x86)\Windows Kits\8.0\Windows Performance Toolkit\;C:\Program Files\Microsoft SQL Server\110\Tools\Binn\;C:\Program Files (x86)\Microchip\MPLAB C32 Suite\bin;C:\Program Files\Java\jdk1.7.0_25\bin;C:\Program Files (x86)\Java\jdk1.7.0_03\bin;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Google\google_appengine\;C:\Users\Patrick\Desktop\2013-2014 2nd Sem Files\Eclipsee\eclipse;;. Jun 10, 2014 5:15:51 PM org.apache.tomcat.util.digester.SetPropertiesRule begin WARNING: [SetPropertiesRule]{Server/Service/Engine/Host/Context} Setting property 'source' to 'org.eclipse.jst.jee.server:B2B' did not find a matching property. Jun 10, 2014 5:15:51 PM org.apache.coyote.AbstractProtocol init INFO: Initializing ProtocolHandler ["http-bio-8080"] Jun 10, 2014 5:15:51 PM org.apache.coyote.AbstractProtocol init INFO: Initializing ProtocolHandler ["ajp-bio-8009"] Jun 10, 2014 5:15:51 PM org.apache.catalina.startup.Catalina load INFO: Initialization processed in 544 ms Jun 10, 2014 5:15:51 PM org.apache.catalina.core.StandardService startInternal INFO: Starting service Catalina Jun 10, 2014 5:15:51 PM org.apache.catalina.core.StandardEngine startInternal INFO: Starting Servlet Engine: Apache Tomcat/7.0.42 Jun 10, 2014 5:15:52 PM org.apache.coyote.AbstractProtocol start INFO: Starting ProtocolHandler ["http-bio-8080"] Jun 10, 2014 5:15:52 PM org.apache.coyote.AbstractProtocol start INFO: Starting ProtocolHandler ["ajp-bio-8009"] Jun 10, 2014 5:15:52 PM org.apache.catalina.startup.Catalina start INFO: Server startup in 374 ms com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near '`'. This is my code package b2b.fishermall; public class ConnectionString extends SqlStringCommands { public String getDriver(){ return "com.microsoft.sqlserver.jdbc.SQLServerDriver"; } public String getURL() { return "jdbc:sqlserver://localhost:1433;databaseName=B2B;integratedSecurity=true;"; } public String getUsername() { return ""; } public String getDbPassword() { return ""; } }

Read the article

Sliding collision response

- by dbostream

I have been reading plenty of tutorials about sliding collision responses yet I am not able to implement it properly in my project. What I want to do is make a puck slide along the rounded corner boards of a hockey rink. In my latest attempt the puck does slide along the boards but there are some strange velocity behaviors. First of all the puck slows down a lot pretty much right away and then it slides for awhile and stops before exiting the corner. Even if I double the speed I get a similar behavior and the puck does not make it out of the corner. I used some ideas from this document http://www.peroxide.dk/papers/collision/collision.pdf. This is what I have: Update method called from the game loop when it is time to update the puck (I removed some irrelevant parts). I use two states (current, previous) which are used to interpolate the position during rendering. public override void Update(double fixedTimeStep) { /* Acceleration is set to 0 for now. */ Acceleration.Zero(); PreviousState = CurrentState; _collisionRecursionDepth = 0; CurrentState.Position = SlidingCollision(CurrentState.Position, CurrentState.Velocity * fixedTimeStep + 0.5 * Acceleration * fixedTimeStep * fixedTimeStep); /* Should not this be affected by a sliding collision? and not only the position. */ CurrentState.Velocity = CurrentState.Velocity + Acceleration * fixedTimeStep; Heading = Vector2.NormalizeRet(CurrentState.Velocity); } private Vector2 SlidingCollision(Vector2 position, Vector2 velocity) { if(_collisionRecursionDepth > 5) return position; bool collisionFound = false; Vector2 futurePosition = position + velocity; Vector2 intersectionPoint = new Vector2(); Vector2 intersectionPointNormal = new Vector2(); /* I did not include the collision detection code, if a collision is detected the intersection point and normal in that point is returned. */ if(!collisionFound) return futurePosition; /* If no collision was detected it is safe to move to the future position. */ /* It is not exactly the intersection point, but slightly before. */ Vector2 newPosition = intersectionPoint; /* oldVelocity is set to the distance from the newPosition(intersection point) to the position it had moved to had it not collided. */ Vector2 oldVelocity = futurePosition - newPosition; /* Project the distance left to move along the intersection normal. */ Vector2 newVelocity = oldVelocity - intersectionPointNormal * oldVelocity.DotProduct(intersectionPointNormal); if(newVelocity.LengthSq() < 0.001) return newPosition; /* If almost no speed, no need to continue. */ _collisionRecursionDepth++; return SlidingCollision(newPosition, newVelocity); } What am I doing wrong with the velocity? I have been staring at this for very long so I have gone blind. I have tried different values of recursion depth but it does not seem to make it better. Let me know if you need more information. I appreciate any help. EDIT: A combination of Patrick Hughes' and teodron's answers solved the velocity problem (I think), thanks a lot! This is the new code: I decided to use a separate recursion method now too since I don't want to recalculate the acceleration in each recursion. public override void Update(double fixedTimeStep) { Acceleration.Zero();// = CalculateAcceleration(fixedTimeStep); PreviousState = new MovingEntityState(CurrentState.Position, CurrentState.Velocity); CurrentState = SlidingCollision(CurrentState, fixedTimeStep); Heading = Vector2.NormalizeRet(CurrentState.Velocity); } private MovingEntityState SlidingCollision(MovingEntityState state, double timeStep) { bool collisionFound = false; /* Calculate the next position given no detected collision. */ Vector2 futurePosition = state.Position + state.Velocity * timeStep; Vector2 intersectionPoint = new Vector2(); Vector2 intersectionPointNormal = new Vector2(); /* I did not include the collision detection code, if a collision is detected the intersection point and normal in that point is returned. */ /* If no collision was detected it is safe to move to the future position. */ if (!collisionFound) return new MovingEntityState(futurePosition, state.Velocity); /* Set new position to the intersection point (slightly before). */ Vector2 newPosition = intersectionPoint; /* Project the new velocity along the intersection normal. */ Vector2 newVelocity = state.Velocity - 1.90 * intersectionPointNormal * state.Velocity.DotProduct(intersectionPointNormal); /* Calculate the time of collision. */ double timeOfCollision = Math.Sqrt((newPosition - state.Position).LengthSq() / (futurePosition - state.Position).LengthSq()); /* Calculate new time step, remaining time of full step after the collision * current time step. */ double newTimeStep = timeStep * (1 - timeOfCollision); return SlidingCollision(new MovingEntityState(newPosition, newVelocity), newTimeStep); } Even though the code above seems to slide the puck correctly please have a look at it. I have a few questions, if I don't multiply by 1.90 in the newVelocity calculation it doesn't work (I get a stack overflow when the puck enters the corner because the timeStep decreases very slowly - a collision is found early in every recursion), why is that? what does 1.90 really do and why 1.90? Also I have a new problem, the puck does not move parallell to the short side after exiting the curve; to be more exact it moves outside the rink (I am not checking for any collisions with the short side at the moment). When I perform the collision detection I first check that the puck is in the correct quadrant. For example bottom-right corner is quadrant four i.e. circleCenter.X < puck.X && circleCenter.Y puck.Y is this a problem? or should the short side of the rink be the one to make the puck go parallell to it and not the last collision in the corner? EDIT2: This is the code I use for collision detection, maybe it has something to do with the fact that I can't make the puck slide (-1.0) but only reflect (-2.0): /* Point is the current position (not the predicted one) and quadrant is 4 for the bottom-right corner for example. */ if (GeometryHelper.PointInCircleQuadrant(circleCenter, circleRadius, state.Position, quadrant)) { /* The line is: from = state.Position, to = futurePosition. So a collision is detected when from is inside the circle and to is outside. */ if (GeometryHelper.LineCircleIntersection2d(state.Position, futurePosition, circleCenter, circleRadius, intersectionPoint, quadrant)) { collisionFound = true; /* Set the intersection point to slightly before the real intersection point (I read somewhere this was good to do because of floting point precision, not sure exactly how much though). */ intersectionPoint = intersectionPoint - Vector2.NormalizeRet(state.Velocity) * 0.001; /* Normal at the intersection point. */ intersectionPointNormal = Vector2.NormalizeRet(circleCenter - intersectionPoint) } } When I set the intersection point, if I for example use 0.1 instead of 0.001 the puck travels further before it gets stuck, but for all values I have tried (including 0 - the real intersection point) it gets stuck somewhere (but I necessarily not get a stack overflow). Can something in this part be the cause of my problem? I can see why I get the stack overflow when using -1.0 when calculating the new velocity vector; but not how to solve it. I traced the time steps used in the recursion (initial time step is always 1/60 ~ 0.01666): Recursion depth Time step next recursive call [Start recursion, time step ~ 0.016666] 0 0,000985806527246773 [No collision, stop recursion] [Start recursion, time step ~ 0.016666] 0 0,0149596704364629 1 0,0144883449376379 2 0,0143155612984837 3 0,014224925727213 4 0,0141673917461608 5 0,0141265435314026 6 0,0140953966184117 7 0,0140704653746625 ...and so on. As you can see the collision is detected early in every recursive call which means the next time step decreases very slowly thus the recursion depth gets very big - stack overflow.

Read the article

Solaris: What comes next?

- by alanc

As you probably know by now, a few months ago, we released Solaris 11 after years of development. That of course means we now need to figure out what comes next - if Solaris 11 is “The First Cloud OS”, then what do we need to make future releases of Solaris be, to be modern and competitive when they're released? So we've been having planning and brainstorming meetings, and I've captured some notes here from just one of those we held a couple weeks ago with a number of the Silicon Valley based engineers. Now before someone sees an idea here and calls their product rep wanting to know what's up, please be warned what follows are rough ideas, and as I'll discuss later, none of them have any committment, schedule, working code, or even plan for integration in any possible future product at this time. (Please don't make me force you to read the full Oracle future product disclaimer here, you should know it by heart already from the front of every Oracle product slide deck.) To start with, we did some background research, looking at ideas from other Oracle groups, and competitive OS'es. We examined what was hot in the technology arena and where the interesting startups were heading. We then looked at Solaris to see where we could apply those ideas. Making Network Admins into Socially Networking Admins We all know an admin who has grumbled about being the only one stuck late at work to fix a problem on the server, or having to work the weekend alone to do scheduled maintenance. But admins are humans (at least most are), and crave companionship and community with their fellow humans. And even when they're alone in the server room, they're never far from a network connection, allowing access to the wide world of wonders on the Internet. Our solution here is not building a new social network - there's enough of those already, and Oracle even has its own Oracle Mix social network already. What we proposed is integrating Solaris features to help engage our system admins with these social networks, building community and bringing them recognition in the workplace, using achievement recognition systems as found in many popular gaming platforms. For instance, if you had a Facebook account, and a group of admin friends there, you could register it with our Social Network Utility For Facebook, and then your friends might see: Alan earned the achievement Critically Patched (April 2012) for patching all his servers. Matt is only at 50% - encourage him to complete this achievement today! To avoid any undue risk of advertising who has unpatched servers that are easier targets for hackers to break into, this information would be tightly protected via Facebook's world-renowned privacy settings to avoid it falling into the wrong hands. A related form of gamification we considered was replacing simple certfications with role-playing-game-style Experience Levels. Instead of just knowing an admin passed a test establishing a given level of competency, these would provide recruiters with a more detailed level of how much real-world experience an admin has. Achievements such as the one above would feed into it, but larger numbers of experience points would be gained by tougher or more critical tasks - such as recovering a down system, or migrating a service to a new platform. (As long as it was an Oracle platform of course - migrating to an HP or IBM platform would cause the admin to lose points with us.) Unfortunately, we couldn't figure out a good way to prevent (if you will) “gaming” the system. For instance, a disgruntled admin might decide to start ignoring warnings from FMA that a part is beginning to fail or skip preventative maintenance, in the hopes that they'd cause a catastrophic failure to earn more points for bolstering their resume as they look for a job elsewhere, and not worrying about the effect on your business of a mission critical server going down. More Z's for ZFS Our suggested new feature for ZFS was inspired by the worlds most successful Z-startup of all time: Zynga. Using the Social Network Utility For Facebook described above, we'd tie it in with ZFS monitoring to help you out when you find yourself in a jam needing more disk space than you have, and can't wait a month to get a purchase order through channels to buy more. Instead with the click of a button you could post to your group: Alan can't find any space in his server farm! Can you help? Friends could loan you some space on their connected servers for a few weeks, knowing that you'd return the favor when needed. ZFS would create a new filesystem for your use on their system, and securely share it with your system using Kerberized NFS. If none of your friends have space, then you could buy temporary use space in small increments at affordable rates right there in Facebook, using your Facebook credits, and then file an expense report later, after the urgent need has passed. Universal Single Sign On One thing all the engineers agreed on was that we still had far too many "Single" sign ons to deal with in our daily work. On the web, every web site used to have its own password database, forcing us to hope we could remember what login name was still available on each site when we signed up, and which unique password we came up with to avoid having to disclose our other passwords to a new site. In recent years, the web services world has finally been reducing the number of logins we have to manage, with many services allowing you to login using your identity from Google, Twitter or Facebook. So we proposed following their lead, introducing PAM modules for web services - no more would you have to type in whatever login name IT assigned and try to remember the password you chose the last time password aging forced you to change it - you'd simply choose which web service you wanted to authenticate against, and would login to your Solaris account upon reciept of a cookie from their identity service. Pinning notes to the cloud We also all noted that we all have our own pile of notes we keep in our daily work - in text files in our home directory, in notebooks we carry around, on white boards in offices and common areas, on sticky notes on our monitors, or on scraps of paper pinned to our bulletin boards. The contents of the notes vary, some are things just for us, some are useful for our groups, some we would share with the world. For instance, when our group moved to a new building a couple years ago, we had a white board in the hallway listing all the NIS & DNS servers, subnets, and other network configuration information we needed to set up our Solaris machines after the move. Similarly, as Solaris 11 was finishing and we were all learning the new network configuration commands, we shared notes in wikis and e-mails with our fellow engineers. Users may also remember one of the popular features of Sun's old BigAdmin site was a section for sharing scripts and tips such as these. Meanwhile, the online "pin board" at Pinterest is taking the web by storm. So we thought, why not mash those up to solve this problem? We proposed a new BigAddPin site where users could “pin” notes, command snippets, configuration information, and so on. For instance, once they had worked out the ideal Automated Installation manifest for their app server, they could pin it up to share with the rest of their group, or choose to make it public as an example for the world. Localized data, such as our group's notes on the servers for our subnet, could be shared only to users connecting from that subnet. And notes that they didn't want others to see at all could be marked private, such as the list of phone numbers to call for late night pizza delivery to the machine room, the birthdays and anniversaries they can never remember but would be sleeping on the couch if they forgot, or the list of automatically generated completely random, impossible to remember root passwords to all their servers. For greater integration with Solaris, we'd put support right into the command shells — redirect output to a pinned note, set your path to include pinned notes as scripts you can run, or bring up your recent shell history and pin a set of commands to save for the next time you need to remember how to do that operation. Location service for Solaris servers A longer term plan would involve convincing the hardware design groups to put GPS locators with wireless transmitters in future server designs. This would help both admins and service personnel trying to find servers in todays massive data centers, and could feed into location presence apps to help show potential customers that while they may not see many Solaris machines on the desktop any more, they are all around. For instance, while walking down Wall Street it might show “There are over 2000 Solaris computers in this block.” [Note: this proposal was made before the recent media coverage of a location service aggregrator app with less noble intentions, and in hindsight, we failed to consider what happens when such data similarly falls into the wrong hands. We certainly wouldn't want our app to be misinterpreted as “There are over $20 million dollars of SPARC servers in this building, waiting for you to steal them.” so it's probably best it was rejected.] Harnessing the power of the GPU for Security Most modern OS'es make use of the widespread availability of high powered GPU hardware in today's computers, with desktop environments requiring 3-D graphics acceleration, whether in Ubuntu Unity, GNOME Shell on Fedora, or Aero Glass on Windows, but we haven't yet made Solaris fully take advantage of this, beyond our basic offering of Compiz on the desktop. Meanwhile, more businesses are interested in increasing security by using biometric authentication, but must also comply with laws in many countries preventing discrimination against employees with physical limations such as missing eyes or fingers, not to mention the lost productivity when employees can't login due to tinted contacts throwing off a retina scan or a paper cut changing their fingerprint appearance until it heals. Fortunately, the two groups considering these problems put their heads together and found a common solution, using 3D technology to enable authentication using the one body part all users are guaranteed to have - pam_phrenology.so, a new PAM module that uses an array USB attached web cams (or just one if the user is willing to spin their chair during login) to take pictures of the users head from all angles, create a 3D model and compare it to the one in the authentication database. While Mythbusters has shown how easy it can be to fool common fingerprint scanners, we have not yet seen any evidence that people can impersonate the shape of another user's cranium, no matter how long they spend beating their head against the wall to reshape it. This could possibly be extended to group users, using modern versions of some of the older phrenological studies, such as giving all users with long grey beards access to the System Architect role, or automatically placing users with pointy spikes in their hair into an easy use mode. Unfortunately, there are still some unsolved technical challenges we haven't figured out how to overcome. Currently, a visit to the hair salon causes your existing authentication to expire, and some users have found that shaving their heads is the only way to avoid bad hair days becoming bad login days. Reaction to these ideas After gathering all our notes on these ideas from the engineering brainstorming meeting, we took them in to present to our management. Unfortunately, most of their reaction cannot be printed here, and they chose not to accept any of these ideas as they were, but they did have some feedback for us to consider as they sent us back to the drawing board. They strongly suggested our ideas would be better presented if we weren't trying to decipher ink blotches that had been smeared by the condensation when we put our pint glasses on the napkins we were taking notes on, and to that end let us know they would not be approving any more engineering offsites in Irish themed pubs on the Friday of a Saint Patrick's Day weekend. (Hopefully they mean that situation specifically and aren't going to deny the funding for travel to this year's X.Org Developer's Conference just because it happens to be in Bavaria and ending on the Friday of the weekend Oktoberfest starts.) They recommended our research techniques could be improved over just sitting around reading blogs and checking our Facebook, Twitter, and Pinterest accounts, such as considering input from alternate viewpoints on topics such as gamification. They also mentioned that Oracle hadn't fully adopted some of Sun's common practices and we might have to try harder to get those to be accepted now that we are one unified company. So as I said at the beginning, don't pester your sales rep just yet for any of these, since they didn't get approved, but if you have better ideas, pass them on and maybe they'll get into our next batch of planning.

Read the article

CodePlex Daily Summary for Monday, May 19, 2014

CodePlex Daily Summary for Monday, May 19, 2014Popular ReleasesLINQ to Twitter: LINQ to Twitter v3.0.3: Supports .NET 4.5x, Windows Phone 8.x, Windows 8.x, Windows Azure, Xamarin.Android, and Xamarin.iOS. New features include Status/Lookup, Mute APIs, and bug fixes. 100% Twitter API v1.1 coverage, Async, Portable Class Library (PCL).CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.26.0: Added access to the Release Notes during 'Check for Updates...'' Debug panels Added support for generic types members Members are grouped into 'Raw View' and 'Non-Public members' categories Implemented dedicated (array-like) view for Lists and Dictionaries http://download-codeplex.sec.s-msft.com/Download?ProjectName=csscriptnpp&DownloadId=846498ClosedXML - The easy way to OpenXML: ClosedXML 0.70.0: A lot of fixes. See history.SFDL.NET: SFDL.NET (2.2.9.2): Changelog: Neues Icon Xup.in CnL Plugin BugfixSEToolbox: SEToolbox 01.030.008 Release 1: Fixed cube editor failing to apply color to cubes. Added to cube editor, replace cube dialog, and Build Percent dialog. Corrected for hidden asteroid ore, allowing rare ore to show when importing an asteroid, or converting a 3d model to an asteroid (still appears to be limitations on rare ore in small asteroids). Allowed ore selection to Asteroid file import. (Can copy/import and convert existing asteroid to another ore). Added progress bars to common long running operations. Fixed ...Better Robocopy GUI: Command Line GUI for Robocopy: Better Robocopy GUI had become the primary plugin in Command Line GUI built on .NET 4Mini SQL Query: Mini SQL Query (1.0.71.456): Minor fixes and template corrections.HMS_TEST: ??1: ?? ???????TFS Planning and Disaster Recovery Avoidance Guide: v1.4.BETA - TFS, DR and Azure IaaS Planning Guides: Welcome to the TFS Planning and DR Avoidance Guidance What is new? A new crisper, more compact style, which is easier to consume on multiple devices without sacrificing any content. Also included are the new TFS on Azure IaaS guide and supplementary guides. Note Capacity planning workbook and posters are included in the Everything Zip package. Quality-Bar Detail Documentation has been reviewed by Visual Studio ALM Rangers Documentation has been through an independent technical review ...CRM Web API Lead Capture Example: CRM Web API Lead Capture Example: Sample Visual Studio 2013 project that provides an example of how you could use Web API and Microsoft Azure (could be deployed anywhere) to capture simple HTML form data into Dynamics CRM without directly having to integrate a .NET component.MB Tools: MDT Monitor Tool v1.4: This tool is used to connect to an MDT 2013 Monitor Webservice. The purpose is to provide an alternative to the MDT Deployment Workbench. Update: New in v1.4: Fixed bug where Dart Remote Viewer didnt work Option to show client local time instead of UTC, edit config.xml to enable/disable New in v1.2: Fixed Dart Remote Viewer not connection to full ip Issue: 1222 New in v1.1: Added timers for autorefresh of webservice info Added some better errorchecking and cleaned up the code a bit ...Bob The Simple Text Game: Bob The Simple Text Game: Bob The Simple Text GameWinAudit: WinAudit Freeware v3.0: WinAudit.exe v3.0 MD5: 88750CCF49FF7418199B2645755830FA Known Issues: 1. Report creation can be very slow when right-to-left (Hebrew) characters are present. 2. Emsisoft Anti-Malware may stop and/or quarantine WinAudit. This happens when WinAudit attempts to obtain a list if running programmes. You will need to set an exception rule in Emsisoft to allow WinAudit to run.crashme: crashme source tarball 2.7: Updated for 64-bit Linux environments with a system call to change the default no-execute-data protection. This tarball is equivalent to committed source revision 108727LUA for Windows CE: LUA 5.2.3 for Windows CE 5.0 (ARMV4I): LUA for Windows CE This is a preliminary porting of the latest LUA release (5.2.3) to the Windows CE platform. Command-line compiler, interpreter, dynamic-link-library, and import-library (both static and dynamic stubs) are provided as a binary release. In this release, the Windows CE compatibility CRT static library has been added, in order to embed statically the LUA interpreter. Moreover, the include files are present in the distribution archive, too.Jquery Dirty Flag: Beta Version 1.0: Simple Way to Manage Dirty Flag @ Client SideProView: ProView-2: Added a new short-cut key: Ctrl+D copies the value from the above cell to the current cell. The key combination Shift+NumPadMinus makes an underscore character Fixed a bug during renaming that displayed the message "The file is in use by another process" The spread sheet can now be customized with a highlighting row color for the currently displayed image.TerraMap (Terraria World Map Viewer): TerraMap 1.0.4: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed installer not uninstalling older versions The setup file will make sure .NET 4 is installed, install TerraMap, create desktop and start menu shortcuts, add a .wld file association, and launch TerraMap. If you prefer the zip ...WPF Localization Extension: v2.2.1: Issue #9277 Issue #9292 Issue #9311 Issue #9312 Issue #9313 Issue #9314CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.1.41167 Release: This release of the CtrlAltStudio Viewer includes the following significant features: Oculus Rift support. Stereoscopic 3D display support. Variable walking / flying speed. Xbox 360 Controller support. Kinect for Windows support. Based on Firestorm viewer 4.6.5 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-1-41167-release Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http:/...New Projects.NET Development Library: .NET Development LibraryBizTalk Flow Visualizer: This tool has been designed to help BizTalk developers and administrators visualize the flow of messages through their implementation of BizTalk Server.BlackSwan: Provides tools for value investingCamel Case Parser: Simple method with unit tests for splitting an up or down camel cased word into the words that comprise it.eukota_sandbox: really just a repository for practicing with some students i mentor.Hyperlapse: Software repository for Hyperlapse, a Universal Store App for Windows 8.1 and Windows Phone 8.1, National Level entry in code.fun.do hackathon by Microsoft.Informiamoci Partecipando: Progetto presentato al #code4italyKipLink: MVC5 Web Api 2 EF DB First Oracle 11g Custom MembershipMatAcademyPlayground: MatAcademy 2014 playgroundOgCRM: Proyecto OgCRMPowerSYDI: This is an re-engineering of SYDI vbscript created by Patrick Ogenstad in PowerShell. SharpLightReporting: SharpLightReporting is a reporting system for .Net developers, based on open source SpreadsheetLight excel/spreadsheet automation system. T4 Template to pre-generate views for Entity Framework 5.0, .NET 4.5: T4 Template to pre-generate views for Entity Framework 6.0, .NET 4.5Task Board: Simple TaskboardWentex OS: Wentex das kostenfrei Betriebssystem für alleWinldTunnel - VIPBrowserProject: NoneWintcy: Wintcy's only function is to disable taskbar transparency that Microsoft for some reason has left in Windows 8.????????-????????【??】????????????: ????????????????????????,??????????,????,????,?????????、??????,??????。 ??????-??????【??】??????????: ???????????,?????????????? ??。????????、????、????、?????????? ???????。 ??????-??????【??】??????????: ???????????????????????:????、????、??????????????,????????。????????! ??????-【??】??????????: ???????????????????,????,????,????,???????,?????,?????.??????。 ??????-??????【??】??????????: ????????????????????????????:???????,??????,????,????,????,?????！ ??????-??????【??】??????????: ????????????,??,??,??,??? ?,??,,??,??,??,??,??,??,????????,??????！ ??????-??????【??】??????????: ?????????????????,?????????????。????????????,???????,???????,?????,?????。 ??????-??????【??】??????????: ???????????? ???? ???? ???? ???? ???? ??????? ?????，????????????????. ??????-??????【??】??????????: ???????????、????、????、??????、????、????????,????????、?????????,?????。 ???????-???????【??】???????????: ?????????????????????,??????????,????????、????,??????????,??????????。 ???????-???????【??】???????????: ???????????????????、????,??100%????,??????,????????????,???????????! ???????-???????【??】???????????: ?????????,??????:?????,?????,??????,??????????,????????。????????! ??????-??????【??】??????????: ???????【.????.????.????.????.】??【??】:、??、??、??、??、??、??、??、??、??、??、?????。 ??????-??????【??】??????????: ??????????????????,????,??.??.??.??.??.??.??.???，????，???????! ??????-??????【??】??????????: ??????????????????、????、??????、????????,????????????,???????????！ ??????-??????【??】??????????: ?????????????????,???????????????。???????????,??????:????、????、???????！ ??????-??????【??】??????????: ?????????????????????,????,????,??????????。???????????????,??,??,??????????,??????... ??????-??????【??】??????????: ??????????????,?????????????,????,?????????,?????????????,?????,?????! ??????-??????【??】??????????: ????????????????，???????、???????????，????????、????、????、??????、????????。 ??????-??????【??】??????????: ????????????????、?????,????????????????????,????,????,??????。 ??????-??????【??】??????????: ?????????????:??????、????、????、????、????、??????、??????，???????! ??????-??????【??】??????????: ???????????? ???? ???? ???? ???? ???? ??????? ?????，????????????????. ??????-??????【??】??????????: ???????????????:?????? ???? ??????,???????,??????,???????。 ??????-??????【??】??????????: ????????????,????,??????????? ???? ???? ?????????,???,??,?????! ??????-??????【??】??????????: ???????????,????,????,??????,????“????、????、????、????”????????,??????. ??????-??????【??】??????????: ???????????、????、????、??????、????、????????,????????、?????????,?????。 ??????-??????【??】??????????: ?????????????????,?????????????。????????????,???????,???????,?????,?????。 ??????-??????【??】??????????: ?????????????????????????????、????、????、???????????,????,????! ??????-??????【??】??????????: ????????????????6?,???????????????????????????,??????????????,?????????！ ??????-??????【??】??????????: ????????????????8?，????????,????????,??????????,?????,????? ,????????! ??????-??????【??】??????????: ?????????????????,??????????????、???????、???????、???????、?????！ ??????-??????【??】??????????: ??????????????????????????,???????????,????????,?????????????????????。 ??????-??????【??】??????????: ????????????????????,????????????????,????????????????,??????！ ??????-??????【??】??????????: ????????????,????,??????????? ???? ???? ?????????,???,??,?????! ??????-??????【??】??????????: ???????????????????????????,???????????????????????,???????。 ??????-??????【??】??????????: ????????????????:?????? ???? ??????,???????,??????,???????。 ??????-??????【??】??????????: ?????????、???、??、??????????????????????????????,????????????????! ??????-??????【??】??????????: ????????????????????,????????:??、??、???,?????????????????????! ??????-??????【??】??????????: ?????????????,?????,???????????,???????,????,????,????,?????。 ??????-??????【??】??????????: ???????????????,????,???????、???????????,???????????,????,?????,???????。 ??????-??????【??】??????????: ??????????????????,???????????,??????????????,??????????，??????????????！ ??????-??????【??】??????????: ????????????????,?????????????? ??。??????????、????、????、?????????? ???????。 ??????-??????【??】??????????: ????????????,??????????、??????,??????????、????、????、???????。 ??????-??????【??】??????????: ?????????????、??????????????????,????????,?????,??????,????,????,????! ??????-??????【??】??????????: ??????????????????????,????????,??????????,?????,????? ,????????! ??????-??????【??】??????????: ??????????,????????,?????,???,???????????,???????????,?????,??????！ ??????-??????【??】??????????: ??????????,??????????????????????,???????????????,?????????????！ ??????-??????【??】??????????: ?????????????????????，?????????/?,,???????????,??????????????! ??????-??????【??】??????????: ????????????????,?????????、??、??、????,??????????,?????????????！ ??????-??????【??】??????????: ???????????、????、????、??????????,???,?????,???????????????. ??????-??????【??】??????????: ??????????????????????,?????, ... ????????????,????,????,?????,???????。

Read the article

CodePlex Daily Summary for Tuesday, June 08, 2010

CodePlex Daily Summary for Tuesday, June 08, 2010New ProjectsAD CMS: CMS software project still in its initial development and design stage.Animated panel: Animated Panel is a WPF control that supports animation of its content on resize. Can be used in item controls (ListBox for example) as ItemsPanelT...Anurag Pallaprolu's Code Repository: Hi there, this is Anurag P.'s public repository which contains most of c++ language examples and many command line(only) applications. Well , plea...atfas: atfasBibleNotes: A small application that uses BibleGateway to lookup scripture and add notes to themCarRental: How to Rent A Car.Food Innovation: This is the Food Innovation project.Generic Validation.NET: Generic Validation.NET is a flexible lightweight validation library for .NET, that can be used by any .NET project: ASP.NET Web Forms, ASP.NET MVC,...Komoi: Komoi is an app that will bring on a new form of web comic delivery.Liekhus Entity Framework XAF Extensions: Entity Framework extensions to support DevExpress eXpress Application Framework (XAF) code generation by Patrick Liekhus.Marketing: Desing Automation Marketing FlowMediaCoder.NET: MediaCoder.NET makes it easy for normal PC users to convert media files to other formats. It is developed in Visual Basic.NETMemetic NPC Behavior Toolkit: This is a library based on the NeverWinter Nights' Memetic AI Toolkit by William Bull. This is an attempt at creating a C# edition of this brillia...MeVisLab QT VR Export: -Mudbox: This project for personal test. Prog2: wi ss10 2010 PSAdmin: PSAdmin is a web based administration tool that allows the easy execution of Windows PowerShell scripts within your environment.RIA Services Essentials: The RIA Services Essentials project contains sample applications/extensions demonstrating using and extending WCF RIA Services v1.SCSM Service Request: The Service Request project defines a new work item class called 'Service Request' and the corresponding form for that work item class. It is a go...SFTP Component for .NET CSharp, VB.NET, and ASP.NET: The Ultimate SSH Secure File Transfer (SFTP) .NET Component offers a comprehensive interface for SFTP, enabling you to quickly and easily incorpora...shitcore: Application demonstrating how to turn a crappy application into something useful. Read more about the refactoring in http://blog.gauffin.com (sear...SystemCentered Operations Manager Reporting: SystemCentered Reporting give Microsoft System Center Operations Manager administrators an extended set of performance reports aimed towards all us...TokyoTyrantClient: makes it easier for c# developer to write code to connect the tokyo tyrant. it support: 1.utf-8 encode 2.tcpClient pool 3.rich setting about tc...Ultimate FTP Component for .NET C#, VB.NET and ASP.NET: Ultimate FTP is a 100%-managed .NET class library that adds powerful and comprehensive File Transfer capabilities to your .NET applications. WCF 4 Templates for Visual Studio 2010: WCF 4 templates for Visual Studio 2010 providing a scenario-driven starting point.XCube: XCube is a basic command line interface, with support for files, user accounts(only in the GUI), and variables(only in DevMode). It is developed in...New ReleasesAdd-ons for EPiServer Relate+: EPiXternal.RelatePlus.Properties 0.1.0.0 Alpha: This is the Alpha release of EPiXternal.RelatePlus.Properties. The download is in the form of an .epimodule file that you can install with EPiServe...Add-ons for EPiServer Relate+: EPiXternal.RelatePlus.WebControl 0.1.0.0 Alpha: This is the Alpha release of EPiXternal.RelatePlus.WebControls. The download is in the form of an .epimodule file that you can install with EPiServ...Animated panel: AnimatedPanel v1: First version of AnimatedPanel.Anurag Pallaprolu's Code Repository: C.L.O.S.E - V3: C.L.O.S.E - V3 Smaller than ever. More Useful than ever Run only CLOSEV3.exeAnurag Pallaprolu's Code Repository: FLTK - 1.3.X: The Fast Lightining Tool Kit is back. This is the FLTK 1.3.X Tar ballAnurag Pallaprolu's Code Repository: KBHIT Function Code: This is a sample to teach about kbhit()Browser Gallese: Browser 1.0.0.15: Continua l'era del browser opensource con una novità:ho impiantato il P2P online. Adesso il browser ha bisogno di Java. Se non lo avete,cliccate qu...CC.Hearts Screen Saver: CC.Hearts Screen Saver 1.0.10.607: This is the initial release of CC.Hearts Screen Saver. Marking as stable but limited testing at this point so feedback is greatly welcomed.Community Forums NNTP bridge: Community Forums NNTP Bridge V32: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...DotNetNuke® Skins: Default.css (beta): About The team has put together a cleaned up and optimized default.css file as a first step in moving toward more efficient CSS usage. Ideally, th...Dynamic Survey Forms - SharePoint Web Part: Code Fix 06-07-2010: Fix for editing existing forms Add: Requiered field option Add: Requiered field validation on submitFloe IRC Client: Floe 1.0 (2010-06): NOTE: You may have to uninstall your existing version for this installer to work properly. - Added /QUOTE command - Fixed bug where new message in...Folder Bookmarks: Folder Bookmarks 1.6.2.1: The latest version of Folder Bookmarks (1.6.2.1), with new Mini-Menu UI changes (1.3). Once you have extracted the file, do not delete any files/f...Food Innovation: Food Innovation 1.0: This is the V1.0 release.HERB.IQ: Alpha 0.1 Source code release 7: Alpha 0.1 Source code release 7 (skipped uploading 6)Liekhus Entity Framework XAF Extensions: Version 1.1.0: Initial project release. Ported the XAFDSL tool into the Entity Framework and made it work with the Visual Studio 2010 extensions.LogikBug's IoC Container: LogikBug's IoC Container v 1.1: In this release, I add the ability to extend the container using the LogikBug.Injection.Extensibility namespace.MediaCoder.NET: MediaCoder.NET v1.0 beta Source Code: Source code for MediaCoder.NET v1.0 beta it includes everything - also the installer.Memetic NPC Behavior Toolkit: Wandering Meme Test: This was a code spike to see the first custom meme in action. The first meme chosen was the "Wander" meme. This is a Visual Studio 2010 solution. ...Microsoft Silverlight Media Framework: Silverlight Media Framework v2 (RC1): This is the first release candidate for the Microsoft Silverlight Media Framework v2. Note: The IIS Smooth Streaming Player Development Kit assem...mwNSPECT: mwNSPECT Beta: mwNSPECT Mapwindow plugin dll. Place in your MapWindow or BASINS plugins directory. Presently for testing everything, though very much known issu...mwNSPECT: mwNSPECT Beta Installer: Simplistic mwNSPECT Mapwindow plugin installer using Inno setup. Installs all the files you'll need for NSPECT into the C:\NSPECT folder and insta...Near forums - ASP.NET MVC forum engine: Release 1: First release of the SEO friendly ASP.NET MVC forum engine.NLog - Advanced .NET Logging: Nightly Build 2010.06.07.001: Changes since the last build:2010-06-06 22:13:02 Jarek Kowalski Added unit tests for common target behaviors. 2010-06-06 19:36:44 Jarek Kowalski c...patterns & practices – Enterprise Library: Enterprise Library 5.0 - Dev Guide (RC): This is a Release Candidate of the Developer's Guide, C# EditionPSAdmin: 1.0.0.0: This is an alpha release of PSAdmin and should be tested before putting into a production environment. This package is pre-compiled and ready for ...Refix - .NET dependency management: Refix v0.1.0.59 ALPHA: Still a very early version. Functional changes: Added new pre (prebuild) and fix commands (rfx help pre and rfx help fix for explanations).SCSM Service Request: Service Request Management Pack v0.1: !This is an ALPHA release. Please use for testing purposes only.! The management pack is not sealed which means that when a new version of the Se...SFTP Component for .NET CSharp, VB.NET, and ASP.NET: SFTP WinForms Client: SFTP WinForms ClientSharePoint Feature - Version history list Export to Excel: Export Item List Version 1.1: - allows you to select columns to export - multilanguage support Czech, English - some bug fix Install: "C:\Program Files\Common Files\Microsoft S...SharePoint Outlook Connector: Source Code for Version 1.2.4.3: Source Code for Version 1.2.4.3SharePoint PowerRSS: v1.0: Easy/Clean way to get SharePoint list data via more standard RSS feed. I found CleanRSS.aspx as part of SPRSS: Enhanced RSS Functionality for WSS ...Smith Async .NET Memcached Client: Smith.Amc 0.7.3810.36347: Smith Async Memcached client release 0.7.3810.36347 available First public release available. All memcached operations has been implemented except...Star Trooper for XNA 2D Tutorial: Lesson five content: Here is Lesson five original content for the StarTrooper 2D XNA tutorial. The blog tutorial has now started over on http://xna-uk.net/blogs/darkge...Star Trooper for XNA 2D Tutorial: Lesson six content: Here is Lesson six original content for the StarTrooper 2D XNA tutorial. The blog tutorial has now started over on http://xna-uk.net/blogs/darkgen...Stripper: Stripper.exe version 0.1.0: Stripper Remove Diacritics and other unwanted caracters to fabric a more standardized file naming. Especially French caracter and maybe other lang...SystemCentered Operations Manager Reporting: SystemCentered Reports V1: Reports Windows Computer General Performance When troubleshooting performance problems there are typically a set of "go to" performance counters t...TFS Buddy: TFS Buddy Beta 1.1: Minor changes +Added repeat function in action tab to simplyfy creating actions +Added app manifest to make the exe require run as Admin ~How the I...Thumbnail creator and image resizer: ThumbnailCreator1.2.1: ThumbnailCreator1.2.1 added importing of namespaces to .vb(previously in web.config)TokyoTyrantClient: TokyoTyrantClient release: 该客户端有如下特点： 1.支持TcpClient连接池 2.支持UTF-8编码 3.支持初始化链接数，链接过期时间，最大空闲时间，最长工作时间等设置。Ultimate FTP Component for .NET C#, VB.NET and ASP.NET: Build 519: New Release Download setup package at: http://www.componentsoft.net/component/download/?name=UltimateFtp Product Home Page: http://www.componentsof...visinia: visinia_1.2: The new stable version of visinia cms is out, it is visinia 1.2. It has many new features like the admin is one more time is given a new look. the ...WCF 4 Templates for Visual Studio 2010: AnonymousOverHttp: This template generates a WCF service application that exposes a BasicHttpBinding endpoint with maxed message size and reader quotas to provide an ...WhiteMoon: WhiteMoon 0.2.10 Source: The Source code of WhiteMoon 0.2 build 10Most Popular ProjectsCommunity Forums NNTP bridgeASP.NET MVC Time PlannerMoonyDesk (windows desktop widgets)NeatUploadOutSyncViperWorks IgnitionAgUnit - Silverlight unit testing with ReSharperSmith Async .NET Memcached ClientASP.NET MVC ExtensionsAviva Solutions C# Coding GuidelinesMost Active ProjectsCommunity Forums NNTP bridgepatterns & practices – Enterprise LibraryRawrjQuery Library for SharePoint Web ServicesNB_Store - Free DotNetNuke Ecommerce Catalog ModuleGMap.NET - Great Maps for Windows Forms & PresentationN2 CMSStyleCopsmark C# LibraryBlogEngine.NET

Read the article

Nested <a> and <span> challenge

- by PaddyO

Hi all, Trying in vain to get a nested link working within a nested span. This is a working test page for the code below to explain what I'm trying to do. Any ideas on how to get this working in valid html? I guess it's either a nesting order or style syntax thing but I am at a loss. Any thoughts much appreciated. <div id="greyback"> <ul id="scrollbox"> <li class="listcat">List header</li> <li><a class="menu" href="#freeze">List item 1<span><b>This text has popped up because you have clicked the list item, which has an "a" tag and now has :focus. That "a" tag is the first of two.</b><br><br>What I am trying to do is to set the second "a" tag as a DIFFERENT "embedded" link in this box<span style="color: blue; background-color: yellow;">eg, here<a href="http://www.conservationenterprises.com" target="blank">This is the second (nested) "a" tag in this html nest. It is a link to an external site. Instead of this being an always-visible link, I want it to sit within the yellow box in the first span (click the List item 1 to display).</a></span> </a></span> </li> </a></span> </li> </ul> </div> and the CSS: #scrollbox {margin: 0 auto; margin-top: 1em; margin-bottom: 1em; width:19em; height:auto; max-height: 21em; overflow:auto; border-bottom: 0.1em solid #FFA500; border-top: 0.1em solid #FFA500;} #scrollbox a {float: left; color:#000000; text-decoration:none; width:18em; height: auto; margin-bottom: 0.5em; font-family: Arial, sans-serif; font-size: 0.9em; text-align:left;} #scrollbox a.menu {} #scrollbox a span {display:none; position:absolute; left:0em; top:0;} #scrollbox a span img {float: right; border:0; max-width:7.5em;} #scrollbox a:hover {border: 0; color: #7ebb11; font-size:0.9em;} #scrollbox a:hover span {border: 0; color: #535353;} #scrollbox a span:focus {color: blue;} #scrollbox a:active {border:none; color: #535353; text-decoration: none;} #scrollbox a:focus {border:0em solid #000; outline:0;} #scrollbox a:active span, #scrollbox li a:active span, #scrollbox a:focus span, #scrollbox li a:focus span {display: block; width: 52.5em; min-height: 20em; height: auto; left: 1.5em; top:18em; z-index:10; font-size:0.9em; text-align: left; padding: 1em; padding-bottom: 0em; background-color: #c3FFe3; color: #535353; border: solid #FFA500 0.25em;} #scrollbox li a:active span span, #scrollbox li a:focus span span{display: block; width: auto; height: auto; min-height: 2em; left: 25em; top:10em; z-index:10; font-size:0.9em; text-align: left; padding: 1em; padding-bottom: 0em; background-color: transparent; color: #535353; border: dashed red 1px;} .ul#scrollbox {padding-left: 0.1em;} #scrollbox li {float:left; list-style: none; background: url(blank.png) no-repeat left center; margin-left: 0em; font-family:Arial, sans-serif; font-size: 0.9em;} #scrollbox li.listcat {float: left; text-align:left; width: 18em; margin-left: 0em; margin-top: 0.1em; margin-bottom: 0.3em; padding-top:0.5em; color: green; font-size: 0.9em; font-weight:bold;} Cheers Patrick.

Read the article

Android Remote Service Keeps Restarting

- by user244190

Ok so I've built an app that uses a remote service to do some real time GPS tracking. I am using the below code to start and bind to the service. The remote service uses aidl, sets up a notification icon, runs the GPS and locationListener. In onLocationChanged, a handler sends data back to the caller via the callback. Pretty much straight out of the examples and resources online. I want to allow the service to continue running even if the app closes. When the app is restarted, I want the app to again bind to the service (using the existing service if running) and again receive data from the tracker. I currently have the app mode set to singleTask and cannot use singleinstance due to another issue. My problem is that quit often even after the app and service are shut down either from the app itself, or from AdvancedTaskKiller, or a Forceclose, the service will restart and initialize the GPS. touching on the notification will open the app. I again stop the tracking which removes the notification and turns off the GPS Close the app, and again after a few seconds the service restarts. The only way to stop it is to power off the phone. What can I do to stop this from happening. Does it have to do with the mode of operation? START_NOT_STICKY or START_REDELIVER_INTENT? Or do I need to use stopSelf()? My understanding is that if the service is not running when I use bindService() that the service will be created...so do I really need to use start/stopService also? I thought I would need to use it if I want the service to run even after the app is closed. That is why i do not unbind/stop the service in onDestroy(). Is this correct? I've not seen any other info an this, so I,m not sure where to look. Please Help! Thanks Patrick //Remote Service Startup try{ startService(); }catch (Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } } try{ bindService(); }catch (Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } //Remote service shutdown try { unbindService(); }catch(Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } try{ stopService(); }catch(Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } private void startService() { if( myAdapter.trackServiceStarted() ) { if(SETTING_DEBUG_MODE) Toast.makeText(this, "Service already started", Toast.LENGTH_SHORT).show(); started = true; if(!myAdapter.trackDataExists()) insertTrackData(); updateServiceStatus(); } else { startService( new Intent ( "com.codebase.TRACKING_SERVICE" ) ); Log.d( "startService()", "startService()" ); started = true; updateServiceStatus(); } } private void stopService() { stopService( new Intent ( "com.codebase.TRACKING_SERVICE" ) ); Log.d( "stopService()", "stopService()" ); started = false; updateServiceStatus(); } private void bindService() { bindService(new Intent(ITrackingService.class.getName()), mConnection, Context.BIND_AUTO_CREATE); bindService(new Intent(ITrackingSecondary.class.getName()), mTrackingSecondaryConnection, Context.BIND_AUTO_CREATE); started = true; } private void unbindService() { try { mTrackingService.unregisterCallback(mCallback); } catch (RemoteException e) { // There is nothing special we need to do if the service // has crashed. e.getMessage(); } try { unbindService(mTrackingSecondaryConnection); unbindService(mConnection); } catch (Exception e) { // There is nothing special we need to do if the service // has crashed. e.getMessage(); } started = false; } private ServiceConnection mConnection = new ServiceConnection() { public void onServiceConnected(ComponentName className, IBinder service) { // This is called when the connection with the service has been // established, giving us the service object we can use to // interact with the service. We are communicating with our // service through an IDL interface, so get a client-side // representation of that from the raw service object. mTrackingService = ITrackingService.Stub.asInterface(service); // We want to monitor the service for as long as we are // connected to it. try { mTrackingService.registerCallback(mCallback); } catch (RemoteException e) { // In this case the service has crashed before we could even // do anything with it; we can count on soon being // disconnected (and then reconnected if it can be restarted) // so there is no need to do anything here. } } public void onServiceDisconnected(ComponentName className) { // This is called when the connection with the service has been // unexpectedly disconnected -- that is, its process crashed. mTrackingService = null; } }; private ServiceConnection mTrackingSecondaryConnection = new ServiceConnection() { public void onServiceConnected(ComponentName className, IBinder service) { // Connecting to a secondary interface is the same as any // other interface. mTrackingSecondaryService = ITrackingSecondary.Stub.asInterface(service); try{ mTrackingSecondaryService.setTimePrecision(SETTING_TIME_PRECISION); mTrackingSecondaryService.setDistancePrecision(SETTING_DISTANCE_PRECISION); } catch (RemoteException e) { // In this case the service has crashed before we could even // do anything with it; we can count on soon being // disconnected (and then reconnected if it can be restarted) // so there is no need to do anything here. } } public void onServiceDisconnected(ComponentName className) { mTrackingSecondaryService = null; } }; //TrackService onDestry() public void onDestroy() { try{ if(lm != null) { lm.removeUpdates(this); } if(mNotificationManager != null) { mNotificationManager.cancel(R.string.local_service_started); } Toast.makeText(this, "Service stopped", Toast.LENGTH_SHORT).show(); }catch (Exception e){ Toast.makeText(this, e.getMessage(), Toast.LENGTH_SHORT).show(); } // Unregister all callbacks. mCallbacks.kill(); // Remove the next pending message to increment the counter, stopping // the increment loop. mHandler.removeMessages(REPORT_MSG); super.onDestroy(); } ServiceConnectionLeaked: I'm seeing a lot of these: 04-21 09:25:23.347: ERROR/ActivityThread(3246): Activity com.codebase.GPSTest has leaked ServiceConnection com.codebase.GPSTest$6@4482d428 that was originally bound here 04-21 09:25:23.347: ERROR/ActivityThread(3246): android.app.ServiceConnectionLeaked: Activity com.codebase.GPSTest has leaked ServiceConnection com.codebase.GPSTest$6@4482d428 that was originally bound here 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread$PackageInfo$ServiceDispatcher.<init>(ActivityThread.java:977) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread$PackageInfo.getServiceDispatcher(ActivityThread.java:872) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ApplicationContext.bindService(ApplicationContext.java:796) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.content.ContextWrapper.bindService(ContextWrapper.java:337) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.codebase.GPSTest.bindService(GPSTest.java:2206) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.codebase.GPSTest.onStartStopClick(GPSTest.java:1589) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.codebase.GPSTest.onResume(GPSTest.java:1210) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.Instrumentation.callActivityOnResume(Instrumentation.java:1149) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.Activity.performResume(Activity.java:3763) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.performResumeActivity(ActivityThread.java:2937) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.handleResumeActivity(ActivityThread.java:2965) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2516) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.handleRelaunchActivity(ActivityThread.java:3625) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.access$2300(ActivityThread.java:119) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1867) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.os.Handler.dispatchMessage(Handler.java:99) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.os.Looper.loop(Looper.java:123) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.main(ActivityThread.java:4363) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at java.lang.reflect.Method.invokeNative(Native Method) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at java.lang.reflect.Method.invoke(Method.java:521) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at dalvik.system.NativeStart.main(Native Method) And These: Is this ok, or do I need to make sure i deactivate/close 04-21 09:58:55.487: INFO/dalvikvm(3440): Uncaught exception thrown by finalizer (will be discarded): 04-21 09:58:55.487: INFO/dalvikvm(3440): Ljava/lang/IllegalStateException;: Finalizing cursor android.database.sqlite.SQLiteCursor@447ef258 on gps_data that has not been deactivated or closed 04-21 09:58:55.487: INFO/dalvikvm(3440): at android.database.sqlite.SQLiteCursor.finalize(SQLiteCursor.java:596) 04-21 09:58:55.487: INFO/dalvikvm(3440): at dalvik.system.NativeStart.run(Native Method)

Read the article

how to put result in the end using jquery

- by Martty Rox

my code is : html with the js in section please ch3eck it out i need to prodeuce the result of the form of five questions and display it in the last section of the page where am i going wrong am using innerhtml js thing to produce the result in the last section <div id="section1"> <script type="text/javascript"> function changeText2(){ alert("working"); var count1=0; var a=document.forms["myForm"]["drop1"].value; var b=document.forms["myForm"]["drop2"].value; alert(document.forms["myForm"]["drop2"].value); var c=document.forms["myForm"]["drop3"].value; var d=document.forms["myForm"]["drop4"].value; var e=document.forms["myForm"]["drop5"].value; var f=document.forms["myForm"]["drop6"].value; if(a===2) { count1++; alert(count1); } else { alert("lit"); } if(b===2) { count1++; } else { alert("lit"); } if(c===2) { count1++; } else { alert("lit"); } if(d===2) { count1++; } else { alert("lit"); } if(e===2) { count1++; } else alert("lit"); } alert(count1); document.getElementById('boldStuff2').innerHTML = count1; </script> <form name="myForm"> <p>1)  Who won the 1993 “King of the Ring”?</p> <div> <select id="f1" name="drop1"> <option value="0" selected="selected">-- Select -- </option> <option value="1">Owen Hart </option> <option value="2">Bret Hart </option> <option value="3">Edge </option> <option value="4">Mabel </option> </select> </div>  <p>2)  What NHL goaltender has the most career wins?</p> <div> <select id="f2" name="drop2"> <option value="0" selected="selected">-- Select -- </option> <option value="1">Grant Fuhr </option> <option value="2">Patrick Roy </option> <option value="3">Chris Osgood </option> <option value="4">Mike Vernon</option> </select> </div>  <p>3)  What Major League Baseball player holds the record for all-time career high batting average?</p> <div> <select id="f3" name="drop3"> <option value="0" selected="selected">-- Select -- </option> <option value="1">Ty Cobb </option> <option value="2">Larry Walker </option> <option value="3">Jeff Bagwell </option> <option value="4">Frank Thomas</option> </select> </div>  <p>4)  Who among the following is NOT associated with billiards in India?</p> <div> <select id="f4" name="drop4" > <option value="0" selected="selected">-- Select -- </option> <option value="1">Subash Agrawal </option> <option value="2">Ashok Shandilya </option> <option value="3">Manoj Kothari </option> <option value="4">Mihir Sen</option> </select> </div>  <p>5)  Which cricketer died on the field in Bangladesh while playing for Abahani Club?</p> <div> <select id="f5" name="drop5" > <option value="0" selected="selected">-- Select -- </option> <option value="1">Subhash Gupte</option> <option value="2">M.L.Jaisimha</option> <option value="3">Lala Amarnath</option> <option value="4">Raman Lamba</option> </select> </div>  <a href="#services" class="page_nav_btn next"><input type='button' onclick='changeText2()' value='NEXT'/></a> </form> </div> <div id="section2"> </div> ... <div id="results"> <b id='boldStuff2'>fff ggg</b> </div> need to display the results of each section at the last div as shown in script... js for first section not working plz some help me where am i going wrong....

Read the article

A first look at ConfORM - Part 1

- by thangchung

All source codes for this post can be found at here.Have you ever heard of ConfORM is not? I have read it three months ago when I wrote an post about NHibernate and Autofac. At that time, this project really has just started and still in beta version, so I still do not really care much. But recently when reading a book by Jason Dentler NHibernate 3.0 Cookbook, I started to pay attention to it. Author have mentioned quite a lot of OSS in his book. And now again I have reviewed ConfORM once again. I have been involved in ConfORM development group on google and read some articles about it. Fabio Maulo spent a lot of work for the OSS, and I hope it will adapt a great way for NHibernate (because he contributed to NHibernate that). So what is ConfORM? It is stand for Configuration ORM, and it was trying to use a lot of heuristic model for identifying entities from C# code. Today, it's mostly Model First Driven development, so the first thing is to build the entity model. This is really important and we can see it is the heart of business software. Then we have to tell DB about the entity of this model. We often will use Inversion Engineering here, Database Schema is will create based on recently Entity Model. From now we will absolutely not interested in the DB again, only focus on the Entity Model.Fluent NHibenate really good, I liked this OSS. Sharp Architecture and has done so well in Fluent NHibernate integration with applications. A Multiple Database technical in Sharp Architecture is truly awesome. It can receive configuration, a connection string and a dll containing entity model, which would then create a SessionFactory, finally caching inside the computer memory. As the number of SessionFactory can be very large and will full of the memory, it has also devised a way of caching SessionFactory in the file. This post I hope this will not completely explain about and building a model of multiple databases. I just tried to mount a number of posts from the community and apply some of my knowledge to build a management model Session for ConfORM.As well as Fluent NHibernate, ConfORM also supported on the interface mapping, see this to understand it. So the first thing we will build the Entity Model for it, and here is what I will use the model for this article. A simple model for managing news and polls, it will be too easy for a number of people, but I hope not to bring complexity to this post.I will then have some code to build super type for the Entity Model. public interface IEntity<TId> { TId Id { get; set; } } public abstract class EntityBase<TId> : IEntity<TId> { public virtual TId Id { get; set; } public override bool Equals(object obj) { return Equals(obj as EntityBase<TId>); } private static bool IsTransient(EntityBase<TId> obj) { return obj != null && Equals(obj.Id, default(TId)); } private Type GetUnproxiedType() { return GetType(); } public virtual bool Equals(EntityBase<TId> other) { if (other == null) return false; if (ReferenceEquals(this, other)) return true; if (!IsTransient(this) && !IsTransient(other) && Equals(Id, other.Id)) { var otherType = other.GetUnproxiedType(); var thisType = GetUnproxiedType(); return thisType.IsAssignableFrom(otherType) || otherType.IsAssignableFrom(thisType); } return false; } public override int GetHashCode() { if (Equals(Id, default(TId))) return base.GetHashCode(); return Id.GetHashCode(); } } Database schema will be created as:The next step is to build the ConORM builder to create a NHibernate Configuration. Patrick have a excellent article about it at here. Contract of it below: public interface IConfigBuilder { Configuration BuildConfiguration(string connectionString, string sessionFactoryName); } The idea here is that I will pass in a connection string and a set of the DLL containing the Entity Model and it makes me a NHibernate Configuration (shame that I stole this ideas of Sharp Architecture). And here is its code: public abstract class ConfORMConfigBuilder : RootObject, IConfigBuilder { private static IConfigurator _configurator; protected IEnumerable<Type> DomainTypes; private readonly IEnumerable<string> _assemblies; protected ConfORMConfigBuilder(IEnumerable<string> assemblies) : this(new Configurator(), assemblies) { _assemblies = assemblies; } protected ConfORMConfigBuilder(IConfigurator configurator, IEnumerable<string> assemblies) { _configurator = configurator; _assemblies = assemblies; } public abstract void GetDatabaseIntegration(IDbIntegrationConfigurationProperties dBIntegration, string connectionString); protected abstract HbmMapping GetMapping(); public Configuration BuildConfiguration(string connectionString, string sessionFactoryName) { Contract.Requires(!string.IsNullOrEmpty(connectionString), "ConnectionString is null or empty"); Contract.Requires(!string.IsNullOrEmpty(sessionFactoryName), "SessionFactory name is null or empty"); Contract.Requires(_configurator != null, "Configurator is null"); return CatchExceptionHelper.TryCatchFunction( () => { DomainTypes = GetTypeOfEntities(_assemblies); if (DomainTypes == null) throw new Exception("Type of domains is null"); var configure = new Configuration(); configure.SessionFactoryName(sessionFactoryName); configure.Proxy(p => p.ProxyFactoryFactory<ProxyFactoryFactory>()); configure.DataBaseIntegration(db => GetDatabaseIntegration(db, connectionString)); if (_configurator.GetAppSettingString("IsCreateNewDatabase").ConvertToBoolean()) { configure.SetProperty("hbm2ddl.auto", "create-drop"); } configure.Properties.Add("default_schema", _configurator.GetAppSettingString("DefaultSchema")); configure.AddDeserializedMapping(GetMapping(), _configurator.GetAppSettingString("DocumentFileName")); SchemaMetadataUpdater.QuoteTableAndColumns(configure); return configure; }, Logger); } protected IEnumerable<Type> GetTypeOfEntities(IEnumerable<string> assemblies) { var type = typeof(EntityBase<Guid>); var domainTypes = new List<Type>(); foreach (var assembly in assemblies) { var realAssembly = Assembly.LoadFrom(assembly); if (realAssembly == null) throw new NullReferenceException(); domainTypes.AddRange(realAssembly.GetTypes().Where( t => { if (t.BaseType != null) return string.Compare(t.BaseType.FullName, type.FullName) == 0; return false; })); } return domainTypes; } } I do not want to dependency on any RDBMS, so I made a builder as an abstract class, and so I will create a concrete instance for SQL Server 2008 as follows: public class SqlServerConfORMConfigBuilder : ConfORMConfigBuilder { public SqlServerConfORMConfigBuilder(IEnumerable<string> assemblies) : base(assemblies) { } public override void GetDatabaseIntegration(IDbIntegrationConfigurationProperties dBIntegration, string connectionString) { dBIntegration.Dialect<MsSql2008Dialect>(); dBIntegration.Driver<SqlClientDriver>(); dBIntegration.KeywordsAutoImport = Hbm2DDLKeyWords.AutoQuote; dBIntegration.IsolationLevel = IsolationLevel.ReadCommitted; dBIntegration.ConnectionString = connectionString; dBIntegration.LogSqlInConsole = true; dBIntegration.Timeout = 10; dBIntegration.LogFormatedSql = true; dBIntegration.HqlToSqlSubstitutions = "true 1, false 0, yes 'Y', no 'N'"; } protected override HbmMapping GetMapping() { var orm = new ObjectRelationalMapper(); orm.Patterns.PoidStrategies.Add(new GuidPoidPattern()); var patternsAppliers = new CoolPatternsAppliersHolder(orm); //patternsAppliers.Merge(new DatePropertyByNameApplier()).Merge(new MsSQL2008DateTimeApplier()); patternsAppliers.Merge(new ManyToOneColumnNamingApplier()); patternsAppliers.Merge(new OneToManyKeyColumnNamingApplier(orm)); var mapper = new Mapper(orm, patternsAppliers); var entities = new List<Type>(); DomainDefinition(orm); Customize(mapper); entities.AddRange(DomainTypes); return mapper.CompileMappingFor(entities); } private void DomainDefinition(IObjectRelationalMapper orm) { orm.TablePerClassHierarchy(new[] { typeof(EntityBase<Guid>) }); orm.TablePerClass(DomainTypes); orm.OneToOne<News, Poll>(); orm.ManyToOne<Category, News>(); orm.Cascade<Category, News>(Cascade.All); orm.Cascade<News, Poll>(Cascade.All); orm.Cascade<User, Poll>(Cascade.All); } private static void Customize(Mapper mapper) { CustomizeRelations(mapper); CustomizeTables(mapper); CustomizeColumns(mapper); } private static void CustomizeRelations(Mapper mapper) { } private static void CustomizeTables(Mapper mapper) { } private static void CustomizeColumns(Mapper mapper) { mapper.Class<Category>( cm => { cm.Property(x => x.Name, m => m.NotNullable(true)); cm.Property(x => x.CreatedDate, m => m.NotNullable(true)); }); mapper.Class<News>( cm => { cm.Property(x => x.Title, m => m.NotNullable(true)); cm.Property(x => x.ShortDescription, m => m.NotNullable(true)); cm.Property(x => x.Content, m => m.NotNullable(true)); }); mapper.Class<Poll>( cm => { cm.Property(x => x.Value, m => m.NotNullable(true)); cm.Property(x => x.VoteDate, m => m.NotNullable(true)); cm.Property(x => x.WhoVote, m => m.NotNullable(true)); }); mapper.Class<User>( cm => { cm.Property(x => x.UserName, m => m.NotNullable(true)); cm.Property(x => x.Password, m => m.NotNullable(true)); }); } } As you can see that we can do so many things in this class, such as custom entity relationships, custom binding on the columns, custom table name, ... Here I only made two so-Appliers for OneToMany and ManyToOne relationships, you can refer to it here public class ManyToOneColumnNamingApplier : IPatternApplier<PropertyPath, IManyToOneMapper> { #region IPatternApplier<PropertyPath,IManyToOneMapper> Members public void Apply(PropertyPath subject, IManyToOneMapper applyTo) { applyTo.Column(subject.ToColumnName() + "Id"); } #endregion #region IPattern<PropertyPath> Members public bool Match(PropertyPath subject) { return subject != null; } #endregion } public class OneToManyKeyColumnNamingApplier : OneToManyPattern, IPatternApplier<PropertyPath, ICollectionPropertiesMapper> { public OneToManyKeyColumnNamingApplier(IDomainInspector domainInspector) : base(domainInspector) { } #region Implementation of IPattern<PropertyPath> public bool Match(PropertyPath subject) { return Match(subject.LocalMember); } #endregion Implementation of IPattern<PropertyPath> #region Implementation of IPatternApplier<PropertyPath,ICollectionPropertiesMapper> public void Apply(PropertyPath subject, ICollectionPropertiesMapper applyTo) { applyTo.Key(km => km.Column(GetKeyColumnName(subject))); } #endregion Implementation of IPatternApplier<PropertyPath,ICollectionPropertiesMapper> protected virtual string GetKeyColumnName(PropertyPath subject) { Type propertyType = subject.LocalMember.GetPropertyOrFieldType(); Type childType = propertyType.DetermineCollectionElementType(); var entity = subject.GetContainerEntity(DomainInspector); var parentPropertyInChild = childType.GetFirstPropertyOfType(entity); var baseName = parentPropertyInChild == null ? subject.PreviousPath == null ? entity.Name : entity.Name + subject.PreviousPath : parentPropertyInChild.Name; return GetKeyColumnName(baseName); } protected virtual string GetKeyColumnName(string baseName) { return string.Format("{0}Id", baseName); } } Everyone also can download the ConfORM source at google code and see example inside it. Next part I will write about multiple database factory. Hope you enjoy about it. happy coding and see you next part.

Read the article

Linux router: ping doesn't route back

- by El Barto

I have a Debian box which I'm trying to set up as a router and an Ubuntu box which I'm using as a client. My problem is that when the Ubuntu client tries to ping a server on the Internet, all the packets are lost (though, as you can see below, they seem to go to the server and back without problem). I'm doing this in the Ubuntu Box: # ping -I eth1 my.remote-server.com PING my.remote-server.com (X.X.X.X) from 10.1.1.12 eth1: 56(84) bytes of data. ^C --- my.remote-server.com ping statistics --- 13 packets transmitted, 0 received, 100% packet loss, time 12094ms (I changed the name and IP of the remote server for privacy). From the Debian Router I see this: # tcpdump -i eth1 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 7, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 8, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 8, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 9, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 9, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 10, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 10, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 11, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 11, length 64 ^C 9 packets captured 9 packets received by filter 0 packets dropped by kernel # tcpdump -i eth2 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth2, link-type EN10MB (Ethernet), capture size 65535 bytes IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 213, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 213, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 214, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 214, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 215, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 215, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 216, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 216, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 217, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 217, length 64 ^C 10 packets captured 10 packets received by filter 0 packets dropped by kernel And at the remote server I see this: # tcpdump -i eth0 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 1, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 1, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 2, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 2, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 3, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 3, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 4, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 4, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 5, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 5, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 6, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 6, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 7, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 7, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 8, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 8, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 9, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 9, length 64 18 packets captured 228 packets received by filter 92 packets dropped by kernel Here "X.X.X.X" is my remote server's IP and "Y.Y.Y.Y" is my local network's public IP. So, what I understand is that the ping packets are coming out of the Ubuntu box (10.1.1.12), to the router (10.1.1.1), from there to the next router (192.168.1.1) and reaching the remote server (X.X.X.X). Then they come back all the way to the Debian router, but they never reach the Ubuntu box back. What am I missing? Here's the Debian router setup: # ifconfig eth1 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::960c:6dff:fe82:d98/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:105761 errors:0 dropped:0 overruns:0 frame:0 TX packets:48944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:40298768 (38.4 MiB) TX bytes:44831595 (42.7 MiB) Interrupt:19 Base address:0x6000 eth2 Link encap:Ethernet HWaddr 6c:f0:49:a4:47:38 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fea4:4738/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:38335992 errors:0 dropped:0 overruns:0 frame:0 TX packets:37097705 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:4260680226 (3.9 GiB) TX bytes:3759806551 (3.5 GiB) Interrupt:27 eth3 Link encap:Ethernet HWaddr 94:0c:6d:82:c8:72 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:20 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3408 errors:0 dropped:0 overruns:0 frame:0 TX packets:3408 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:358445 (350.0 KiB) TX bytes:358445 (350.0 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:2767779 errors:0 dropped:0 overruns:0 frame:0 TX packets:1569477 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3609469393 (3.3 GiB) TX bytes:96113978 (91.6 MiB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.8.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth2 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth2 # arp -n # Note: Here I have changed all the different MACs except the ones corresponding to the Ubuntu box (on 10.1.1.12 and 192.168.1.12) Address HWtype HWaddress Flags Mask Iface 192.168.1.118 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.72 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.94 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.102 ether NN:NN:NN:NN:NN:NN C eth2 10.1.1.12 ether 00:1e:67:15:2b:f0 C eth1 192.168.1.86 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.2 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.61 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.64 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.116 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.91 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.52 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.93 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.87 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.92 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.100 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.40 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.53 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.83 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.89 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.12 ether 00:1e:67:15:2b:f1 C eth2 192.168.1.77 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.66 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.90 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.65 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.41 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.78 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.123 ether NN:NN:NN:NN:NN:NN C eth2 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 10.1.1.0/24 !10.1.1.0/24 MASQUERADE all -- !10.1.1.0/24 10.1.1.0/24 Chain OUTPUT (policy ACCEPT) target prot opt source destination And here's the Ubuntu box: # ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:67:15:2b:f1 inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe15:2bf1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28785139 errors:0 dropped:0 overruns:0 frame:0 TX packets:19050735 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32068182803 (32.0 GB) TX bytes:6061333280 (6.0 GB) Interrupt:16 Memory:b1a00000-b1a20000 eth1 Link encap:Ethernet HWaddr 00:1e:67:15:2b:f0 inet addr:10.1.1.12 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe15:2bf0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:285086 errors:0 dropped:0 overruns:0 frame:0 TX packets:12719 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30817249 (30.8 MB) TX bytes:2153228 (2.1 MB) Interrupt:16 Memory:b1900000-b1920000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:86048 errors:0 dropped:0 overruns:0 frame:0 TX packets:86048 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11426538 (11.4 MB) TX bytes:11426538 (11.4 MB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.1.1.1 0.0.0.0 UG 100 0 0 eth1 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.8.0.0 192.168.1.10 255.255.255.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 # arp -n # Note: Here I have changed all the different MACs except the ones corresponding to the Debian box (on 10.1.1.1 and 192.168.1.10) Address HWtype HWaddress Flags Mask Iface 192.168.1.70 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.90 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.97 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.103 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.13 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.120 (incomplete) eth0 192.168.1.111 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.118 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.51 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.102 (incomplete) eth0 192.168.1.64 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.52 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.74 (incomplete) eth0 192.168.1.94 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.121 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.72 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.87 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.91 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.71 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.78 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.83 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.88 (incomplete) eth0 192.168.1.82 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.98 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.100 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.93 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.73 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.11 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.85 (incomplete) eth0 192.168.1.112 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.89 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.65 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.81 ether NN:NN:NN:NN:NN:NN C eth0 10.1.1.1 ether 94:0c:6d:82:0d:98 C eth1 192.168.1.53 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.116 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.61 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.10 ether 6c:f0:49:a4:47:38 C eth0 192.168.1.86 (incomplete) eth0 192.168.1.119 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.66 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth1 192.168.1.92 ether NN:NN:NN:NN:NN:NN C eth0 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination Edit: Following Patrick's suggestion, I did a tcpdump con the Ubuntu box and I see this: # tcpdump -i eth1 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 1, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 1, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 2, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 2, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 3, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 3, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 4, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 4, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 5, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 5, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 6, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 6, length 64 ^C 12 packets captured 12 packets received by filter 0 packets dropped by kernel So the question is: if all packets seem to be coming and going, why does ping report 100% packet loss?

Read the article

Why is there a /etc/init.d/mysql file on this Slackware machine? How could it have gotten there?

- by jasonspiro

A client of my IT-consulting service owns a web-development shop. He's been having problems with a Slackware 12.0 server running MySQL 5.0.67. The machine was set up by the client's sysadmin, who left on bad terms. My client no longer employs a sysadmin. As far as I can tell, the only copy of MySQL that's installed is the one described in /var/log/packages/mysql-5.0.67-i486-1: PACKAGE NAME: mysql-5.0.67-i486-1 COMPRESSED PACKAGE SIZE: 16828 K UNCOMPRESSED PACKAGE SIZE: 33840 K PACKAGE LOCATION: /var/slapt-get/archives/./slackware/ap/mysql-5.0.67-i486-1.tgz PACKAGE DESCRIPTION: mysql: mysql (SQL-based relational database server) mysql: mysql: MySQL is a fast, multi-threaded, multi-user, and robust SQL mysql: (Structured Query Language) database server. It comes with a nice API mysql: which makes it easy to integrate into other applications. mysql: mysql: The home page for MySQL is http://www.mysql.com/ mysql: mysql: mysql: mysql: FILE LIST: ./ var/ var/lib/ var/lib/mysql/ var/run/ var/run/mysql/ install/ install/doinst.sh install/slack-desc usr/ usr/include/ usr/include/mysql/ usr/include/mysql/my_alloc.h usr/include/mysql/sql_common.h usr/include/mysql/my_dbug.h usr/include/mysql/errmsg.h usr/include/mysql/my_pthread.h usr/include/mysql/my_list.h usr/include/mysql/mysql.h usr/include/mysql/sslopt-vars.h usr/include/mysql/my_config.h usr/include/mysql/mysql_com.h usr/include/mysql/m_string.h usr/include/mysql/sslopt-case.h usr/include/mysql/my_xml.h usr/include/mysql/sql_state.h usr/include/mysql/my_global.h usr/include/mysql/my_sys.h usr/include/mysql/mysqld_ername.h usr/include/mysql/mysqld_error.h usr/include/mysql/sslopt-longopts.h usr/include/mysql/keycache.h usr/include/mysql/my_net.h usr/include/mysql/mysql_version.h usr/include/mysql/my_no_pthread.h usr/include/mysql/decimal.h usr/include/mysql/readline.h usr/include/mysql/my_attribute.h usr/include/mysql/typelib.h usr/include/mysql/my_dir.h usr/include/mysql/raid.h usr/include/mysql/m_ctype.h usr/include/mysql/mysql_embed.h usr/include/mysql/mysql_time.h usr/include/mysql/my_getopt.h usr/lib/ usr/lib/mysql/ usr/lib/mysql/libmysqlclient_r.so.15.0.0 usr/lib/mysql/libmysqlclient_r.la usr/lib/mysql/libmyisammrg.a usr/lib/mysql/libmystrings.a usr/lib/mysql/libmyisam.a usr/lib/mysql/libmysqlclient.so.15.0.0 usr/lib/mysql/libmysqlclient_r.a usr/lib/mysql/libmysqlclient.a usr/lib/mysql/libheap.a usr/lib/mysql/libvio.a usr/lib/mysql/libmysqlclient.la usr/lib/mysql/libmysys.a usr/lib/mysql/libdbug.a usr/bin/ usr/bin/comp_err usr/bin/my_print_defaults usr/bin/resolve_stack_dump usr/bin/msql2mysql usr/bin/mysqltestmanager-pwgen usr/bin/myisampack usr/bin/replace usr/bin/mysqld_multi usr/bin/mysqlaccess usr/bin/mysql_install_db usr/bin/innochecksum usr/bin/myisam_ftdump usr/bin/mysqlcheck usr/bin/mysqltest usr/bin/mysql_upgrade_shell usr/bin/mysql_secure_installation usr/bin/mysql_fix_extensions usr/bin/mysqld_safe usr/bin/mysql_explain_log usr/bin/mysqlimport usr/bin/myisamlog usr/bin/mysql_tzinfo_to_sql usr/bin/mysql_upgrade usr/bin/mysqltestmanager usr/bin/mysql_fix_privilege_tables usr/bin/mysql_find_rows usr/bin/mysql_convert_table_format usr/bin/mysqltestmanagerc usr/bin/mysqlhotcopy usr/bin/mysqldump usr/bin/mysqlshow usr/bin/mysqlbug usr/bin/mysql_config usr/bin/mysqldumpslow usr/bin/mysql_waitpid usr/bin/mysqlbinlog usr/bin/mysql_client_test usr/bin/perror usr/bin/mysql usr/bin/myisamchk usr/bin/mysql_setpermission usr/bin/mysqladmin usr/bin/mysql_zap usr/bin/mysql_tableinfo usr/bin/resolveip usr/share/ usr/share/mysql/ usr/share/mysql/errmsg.txt usr/share/mysql/swedish/ usr/share/mysql/swedish/errmsg.sys usr/share/mysql/mysql_system_tables_data.sql usr/share/mysql/mysql.server usr/share/mysql/hungarian/ usr/share/mysql/hungarian/errmsg.sys usr/share/mysql/norwegian/ usr/share/mysql/norwegian/errmsg.sys usr/share/mysql/slovak/ usr/share/mysql/slovak/errmsg.sys usr/share/mysql/spanish/ usr/share/mysql/spanish/errmsg.sys usr/share/mysql/polish/ usr/share/mysql/polish/errmsg.sys usr/share/mysql/ukrainian/ usr/share/mysql/ukrainian/errmsg.sys usr/share/mysql/danish/ usr/share/mysql/danish/errmsg.sys usr/share/mysql/romanian/ usr/share/mysql/romanian/errmsg.sys usr/share/mysql/english/ usr/share/mysql/english/errmsg.sys usr/share/mysql/charsets/ usr/share/mysql/charsets/latin2.xml usr/share/mysql/charsets/greek.xml usr/share/mysql/charsets/koi8r.xml usr/share/mysql/charsets/latin1.xml usr/share/mysql/charsets/cp866.xml usr/share/mysql/charsets/geostd8.xml usr/share/mysql/charsets/cp1250.xml usr/share/mysql/charsets/koi8u.xml usr/share/mysql/charsets/cp852.xml usr/share/mysql/charsets/hebrew.xml usr/share/mysql/charsets/latin7.xml usr/share/mysql/charsets/README usr/share/mysql/charsets/ascii.xml usr/share/mysql/charsets/cp1251.xml usr/share/mysql/charsets/macce.xml usr/share/mysql/charsets/latin5.xml usr/share/mysql/charsets/Index.xml usr/share/mysql/charsets/macroman.xml usr/share/mysql/charsets/cp1256.xml usr/share/mysql/charsets/keybcs2.xml usr/share/mysql/charsets/swe7.xml usr/share/mysql/charsets/armscii8.xml usr/share/mysql/charsets/dec8.xml usr/share/mysql/charsets/cp1257.xml usr/share/mysql/charsets/hp8.xml usr/share/mysql/charsets/cp850.xml usr/share/mysql/korean/ usr/share/mysql/korean/errmsg.sys usr/share/mysql/german/ usr/share/mysql/german/errmsg.sys usr/share/mysql/mi_test_all.res usr/share/mysql/greek/ usr/share/mysql/greek/errmsg.sys usr/share/mysql/french/ usr/share/mysql/french/errmsg.sys usr/share/mysql/mysql_fix_privilege_tables.sql usr/share/mysql/dutch/ usr/share/mysql/dutch/errmsg.sys usr/share/mysql/serbian/ usr/share/mysql/serbian/errmsg.sys usr/share/mysql/mysql_system_tables.sql usr/share/mysql/my-huge.cnf usr/share/mysql/portuguese/ usr/share/mysql/portuguese/errmsg.sys usr/share/mysql/japanese/ usr/share/mysql/japanese/errmsg.sys usr/share/mysql/mysql_test_data_timezone.sql usr/share/mysql/russian/ usr/share/mysql/russian/errmsg.sys usr/share/mysql/czech/ usr/share/mysql/czech/errmsg.sys usr/share/mysql/fill_help_tables.sql usr/share/mysql/estonian/ usr/share/mysql/estonian/errmsg.sys usr/share/mysql/my-medium.cnf usr/share/mysql/norwegian-ny/ usr/share/mysql/norwegian-ny/errmsg.sys usr/share/mysql/my-small.cnf usr/share/mysql/mysql-log-rotate usr/share/mysql/italian/ usr/share/mysql/italian/errmsg.sys usr/share/mysql/my-large.cnf usr/share/mysql/ndb-config-2-node.ini usr/share/mysql/binary-configure usr/share/mysql/mi_test_all usr/share/mysql/mysqld_multi.server usr/share/mysql/my-innodb-heavy-4G.cnf usr/doc/ usr/doc/mysql-5.0.67/ usr/doc/mysql-5.0.67/README usr/doc/mysql-5.0.67/Docs/ usr/doc/mysql-5.0.67/Docs/INSTALL-BINARY usr/doc/mysql-5.0.67/COPYING usr/info/ usr/info/mysql.info.gz usr/libexec/ usr/libexec/mysqld usr/libexec/mysqlmanager usr/man/ usr/man/man8/ usr/man/man8/mysqlmanager.8.gz usr/man/man8/mysqld.8.gz usr/man/man1/ usr/man/man1/mysql_zap.1.gz usr/man/man1/mysql_setpermission.1.gz usr/man/man1/mysql_tzinfo_to_sql.1.gz usr/man/man1/msql2mysql.1.gz usr/man/man1/mysql_tableinfo.1.gz usr/man/man1/mysql_explain_log.1.gz usr/man/man1/mysqlcheck.1.gz usr/man/man1/comp_err.1.gz usr/man/man1/my_print_defaults.1.gz usr/man/man1/mysqlbinlog.1.gz usr/man/man1/myisam_ftdump.1.gz usr/man/man1/mysql_upgrade.1.gz usr/man/man1/mysql.1.gz usr/man/man1/mysql_client_test.1.gz usr/man/man1/resolve_stack_dump.1.gz usr/man/man1/mysql_fix_extensions.1.gz usr/man/man1/mysqlmanagerc.1.gz usr/man/man1/mysql_config.1.gz usr/man/man1/mysqlshow.1.gz usr/man/man1/myisamlog.1.gz usr/man/man1/replace.1.gz usr/man/man1/mysqlmanager-pwgen.1.gz usr/man/man1/mysqltest.1.gz usr/man/man1/innochecksum.1.gz usr/man/man1/mysqladmin.1.gz usr/man/man1/perror.1.gz usr/man/man1/mysql_waitpid.1.gz usr/man/man1/mysql_convert_table_format.1.gz usr/man/man1/mysqlman.1.gz usr/man/man1/mysqlimport.1.gz usr/man/man1/mysqlbug.1.gz usr/man/man1/mysql_find_rows.1.gz usr/man/man1/myisampack.1.gz usr/man/man1/myisamchk.1.gz usr/man/man1/mysql_fix_privilege_tables.1.gz usr/man/man1/mysql-stress-test.pl.1.gz usr/man/man1/resolveip.1.gz usr/man/man1/make_win_bin_dist.1.gz usr/man/man1/mysqlhotcopy.1.gz usr/man/man1/mysqld_multi.1.gz usr/man/man1/safe_mysqld.1.gz usr/man/man1/mysql_secure_installation.1.gz usr/man/man1/mysql_install_db.1.gz usr/man/man1/mysqldump.1.gz usr/man/man1/mysql-test-run.pl.1.gz usr/man/man1/mysqld_safe.1.gz usr/man/man1/mysqlaccess.1.gz usr/man/man1/mysql.server.1.gz usr/man/man1/make_win_src_distribution.1.gz etc/ etc/rc.d/ etc/rc.d/rc.mysqld.new etc/my-huge.cnf etc/my-medium.cnf etc/my-small.cnf etc/my-large.cnf /etc/rc.d/rc.mysqld is an ordinary Slackware-type start/stop script: #!/bin/sh # Start/stop/restart mysqld. # # Copyright 2003 Patrick J. Volkerding, Concord, CA # Copyright 2003 Slackware Linux, Inc., Concord, CA # # This program comes with NO WARRANTY, to the extent permitted by law. # You may redistribute copies of this program under the terms of the # GNU General Public License. # To start MySQL automatically at boot, be sure this script is executable: # chmod 755 /etc/rc.d/rc.mysqld # Before you can run MySQL, you must have a database. To install an initial # database, do this as root: # # su - mysql # mysql_install_db # # Note that step one is becoming the mysql user. It's important to do this # before making any changes to the database, or mysqld won't be able to write # to it later (this can be fixed with 'chown -R mysql.mysql /var/lib/mysql'). # To allow outside connections to the database comment out the next line. # If you don't need incoming network connections, then leave the line # uncommented to improve system security. #SKIP="--skip-networking" # Start mysqld: mysqld_start() { if [ -x /usr/bin/mysqld_safe ]; then # If there is an old PID file (no mysqld running), clean it up: if [ -r /var/run/mysql/mysql.pid ]; then if ! ps axc | grep mysqld 1> /dev/null 2> /dev/null ; then echo "Cleaning up old /var/run/mysql/mysql.pid." rm -f /var/run/mysql/mysql.pid fi fi /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/run/mysql/mysql.pid $SKIP & fi } # Stop mysqld: mysqld_stop() { # If there is no PID file, ignore this request... if [ -r /var/run/mysql/mysql.pid ]; then killall mysqld # Wait at least one minute for it to exit, as we don't know how big the DB is... for second in 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 \ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 60 ; do if [ ! -r /var/run/mysql/mysql.pid ]; then break; fi sleep 1 done if [ "$second" = "60" ]; then echo "WARNING: Gave up waiting for mysqld to exit!" sleep 15 fi fi } # Restart mysqld: mysqld_restart() { mysqld_stop mysqld_start } case "$1" in 'start') mysqld_start ;; 'stop') mysqld_stop ;; 'restart') mysqld_restart ;; *) echo "usage $0 start|stop|restart" esac But there's also an unexpected init script on the machine, named /etc/init.d/mysql: #!/bin/sh # Copyright Abandoned 1996 TCX DataKonsult AB & Monty Program KB & Detron HB # This file is public domain and comes with NO WARRANTY of any kind # MySQL daemon start/stop script. # Usually this is put in /etc/init.d (at least on machines SYSV R4 based # systems) and linked to /etc/rc3.d/S99mysql and /etc/rc0.d/K01mysql. # When this is done the mysql server will be started when the machine is # started and shut down when the systems goes down. # Comments to support chkconfig on RedHat Linux # chkconfig: 2345 64 36 # description: A very fast and reliable SQL database engine. # Comments to support LSB init script conventions ### BEGIN INIT INFO # Provides: mysql # Required-Start: $local_fs $network $remote_fs # Should-Start: ypbind nscd ldap ntpd xntpd # Required-Stop: $local_fs $network $remote_fs # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: start and stop MySQL # Description: MySQL is a very fast and reliable SQL database engine. ### END INIT INFO # If you install MySQL on some other places than /usr, then you # have to do one of the following things for this script to work: # # - Run this script from within the MySQL installation directory # - Create a /etc/my.cnf file with the following information: # [mysqld] # basedir=<path-to-mysql-installation-directory> # - Add the above to any other configuration file (for example ~/.my.ini) # and copy my_print_defaults to /usr/bin # - Add the path to the mysql-installation-directory to the basedir variable # below. # # If you want to affect other MySQL variables, you should make your changes # in the /etc/my.cnf, ~/.my.cnf or other MySQL configuration files. # If you change base dir, you must also change datadir. These may get # overwritten by settings in the MySQL configuration files. #basedir= #datadir= # Default value, in seconds, afterwhich the script should timeout waiting # for server start. # Value here is overriden by value in my.cnf. # 0 means don't wait at all # Negative numbers mean to wait indefinitely service_startup_timeout=900 # The following variables are only set for letting mysql.server find things. # Set some defaults pid_file=/var/run/mysql/mysql.pid server_pid_file=/var/run/mysql/mysql.pid use_mysqld_safe=1 user=mysql if test -z "$basedir" then basedir=/usr bindir=/usr/bin if test -z "$datadir" then datadir=/var/lib/mysql fi sbindir=/usr/sbin libexecdir=/usr/libexec else bindir="$basedir/bin" if test -z "$datadir" then datadir="$basedir/data" fi sbindir="$basedir/sbin" libexecdir="$basedir/libexec" fi # datadir_set is used to determine if datadir was set (and so should be # *not* set inside of the --basedir= handler.) datadir_set= # # Use LSB init script functions for printing messages, if possible # lsb_functions="/lib/lsb/init-functions" if test -f $lsb_functions ; then . $lsb_functions else log_success_msg() { echo " SUCCESS! $@" } log_failure_msg() { echo " ERROR! $@" } fi PATH=/sbin:/usr/sbin:/bin:/usr/bin:$basedir/bin export PATH mode=$1 # start or stop shift other_args="$*" # uncommon, but needed when called from an RPM upgrade action # Expected: "--skip-networking --skip-grant-tables" # They are not checked here, intentionally, as it is the resposibility # of the "spec" file author to give correct arguments only. case `echo "testing\c"`,`echo -n testing` in *c*,-n*) echo_n= echo_c= ;; *c*,*) echo_n=-n echo_c= ;; *) echo_n= echo_c='\c' ;; esac parse_server_arguments() { for arg do case "$arg" in --basedir=*) basedir=`echo "$arg" | sed -e 's/^[^=]*=//'` bindir="$basedir/bin" if test -z "$datadir_set"; then datadir="$basedir/data" fi sbindir="$basedir/sbin" libexecdir="$basedir/libexec" ;; --datadir=*) datadir=`echo "$arg" | sed -e 's/^[^=]*=//'` datadir_set=1 ;; --user=*) user=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --pid-file=*) server_pid_file=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --service-startup-timeout=*) service_startup_timeout=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --use-mysqld_safe) use_mysqld_safe=1;; --use-manager) use_mysqld_safe=0;; esac done } parse_manager_arguments() { for arg do case "$arg" in --pid-file=*) pid_file=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --user=*) user=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; esac done } wait_for_pid () { verb="$1" manager_pid="$2" # process ID of the program operating on the pid-file i=0 avoid_race_condition="by checking again" while test $i -ne $service_startup_timeout ; do case "$verb" in 'created') # wait for a PID-file to pop into existence. test -s $pid_file && i='' && break ;; 'removed') # wait for this PID-file to disappear test ! -s $pid_file && i='' && break ;; *) echo "wait_for_pid () usage: wait_for_pid created|removed manager_pid" exit 1 ;; esac # if manager isn't running, then pid-file will never be updated if test -n "$manager_pid"; then if kill -0 "$manager_pid" 2>/dev/null; then : # the manager still runs else # The manager may have exited between the last pid-file check and now. if test -n "$avoid_race_condition"; then avoid_race_condition="" continue # Check again. fi # there's nothing that will affect the file. log_failure_msg "Manager of pid-file quit without updating file." return 1 # not waiting any more. fi fi echo $echo_n ".$echo_c" i=`expr $i + 1` sleep 1 done if test -z "$i" ; then log_success_msg return 0 else log_failure_msg return 1 fi } # Get arguments from the my.cnf file, # the only group, which is read from now on is [mysqld] if test -x ./bin/my_print_defaults then print_defaults="./bin/my_print_defaults" elif test -x $bindir/my_print_defaults then print_defaults="$bindir/my_print_defaults" elif test -x $bindir/mysql_print_defaults then print_defaults="$bindir/mysql_print_defaults" else # Try to find basedir in /etc/my.cnf conf=/etc/my.cnf print_defaults= if test -r $conf then subpat='^[^=]*basedir[^=]*=$.*$$' dirs=`sed -e "/$subpat/!d" -e 's//\1/' $conf` for d in $dirs do d=`echo $d | sed -e 's/[ ]//g'` if test -x "$d/bin/my_print_defaults" then print_defaults="$d/bin/my_print_defaults" break fi if test -x "$d/bin/mysql_print_defaults" then print_defaults="$d/bin/mysql_print_defaults" break fi done fi # Hope it's in the PATH ... but I doubt it test -z "$print_defaults" && print_defaults="my_print_defaults" fi # # Read defaults file from 'basedir'. If there is no defaults file there # check if it's in the old (depricated) place (datadir) and read it from there # extra_args="" if test -r "$basedir/my.cnf" then extra_args="-e $basedir/my.cnf" else if test -r "$datadir/my.cnf" then extra_args="-e $datadir/my.cnf" fi fi parse_server_arguments `$print_defaults $extra_args mysqld server mysql_server mysql.server` # Look for the pidfile parse_manager_arguments `$print_defaults $extra_args manager` # # Set pid file if not given # if test -z "$pid_file" then pid_file=$datadir/mysqlmanager-`/bin/hostname`.pid else case "$pid_file" in /* ) ;; * ) pid_file="$datadir/$pid_file" ;; esac fi if test -z "$server_pid_file" then server_pid_file=$datadir/`/bin/hostname`.pid else case "$server_pid_file" in /* ) ;; * ) server_pid_file="$datadir/$server_pid_file" ;; esac fi case "$mode" in 'start') # Start daemon # Safeguard (relative paths, core dumps..) cd $basedir manager=$bindir/mysqlmanager if test -x $libexecdir/mysqlmanager then manager=$libexecdir/mysqlmanager elif test -x $sbindir/mysqlmanager then manager=$sbindir/mysqlmanager fi echo $echo_n "Starting MySQL" if test -x $manager -a "$use_mysqld_safe" = "0" then if test -n "$other_args" then log_failure_msg "MySQL manager does not support options '$other_args'" exit 1 fi # Give extra arguments to mysqld with the my.cnf file. This script may # be overwritten at next upgrade. $manager --user=$user --pid-file=$pid_file >/dev/null 2>&1 & wait_for_pid created $!; return_value=$? # Make lock for RedHat / SuSE if test -w /var/lock/subsys then touch /var/lock/subsys/mysqlmanager fi exit $return_value elif test -x $bindir/mysqld_safe then # Give extra arguments to mysqld with the my.cnf file. This script # may be overwritten at next upgrade. pid_file=$server_pid_file $bindir/mysqld_safe --datadir=$datadir --pid-file=$server_pid_file $other_args >/dev/null 2>&1 & wait_for_pid created $!; return_value=$? # Make lock for RedHat / SuSE if test -w /var/lock/subsys then touch /var/lock/subsys/mysql fi exit $return_value else log_failure_msg "Couldn't find MySQL manager ($manager) or server ($bindir/mysqld_safe)" fi ;; 'stop') # Stop daemon. We use a signal here to avoid having to know the # root password. # The RedHat / SuSE lock directory to remove lock_dir=/var/lock/subsys/mysqlmanager # If the manager pid_file doesn't exist, try the server's if test ! -s "$pid_file" then pid_file=$server_pid_file lock_dir=/var/lock/subsys/mysql fi if test -s "$pid_file" then mysqlmanager_pid=`cat $pid_file` echo $echo_n "Shutting down MySQL" kill $mysqlmanager_pid # mysqlmanager should remove the pid_file when it exits, so wait for it. wait_for_pid removed "$mysqlmanager_pid"; return_value=$? # delete lock for RedHat / SuSE if test -f $lock_dir then rm -f $lock_dir fi exit $return_value else log_failure_msg "MySQL manager or server PID file could not be found!" fi ;; 'restart') # Stop the service and regardless of whether it was # running or not, start it again. if $0 stop $other_args; then $0 start $other_args else log_failure_msg "Failed to stop running server, so refusing to try to start." exit 1 fi ;; 'reload'|'force-reload') if test -s "$server_pid_file" ; then read mysqld_pid < $server_pid_file kill -HUP $mysqld_pid && log_success_msg "Reloading service MySQL" touch $server_pid_file else log_failure_msg "MySQL PID file could not be found!" exit 1 fi ;; 'status') # First, check to see if pid file exists if test -s "$server_pid_file" ; then read mysqld_pid < $server_pid_file if kill -0 $mysqld_pid 2>/dev/null ; then log_success_msg "MySQL running ($mysqld_pid)" exit 0 else log_failure_msg "MySQL is not running, but PID file exists" exit 1 fi else # Try to find appropriate mysqld process mysqld_pid=`pidof $sbindir/mysqld` if test -z $mysqld_pid ; then if test "$use_mysqld_safe" = "0" ; then lockfile=/var/lock/subsys/mysqlmanager else lockfile=/var/lock/subsys/mysql fi if test -f $lockfile ; then log_failure_msg "MySQL is not running, but lock exists" exit 2 fi log_failure_msg "MySQL is not running" exit 3 else log_failure_msg "MySQL is running but PID file could not be found" exit 4 fi fi ;; *) # usage echo "Usage: $0 {start|stop|restart|reload|force-reload|status} [ MySQL server options ]" exit 1 ;; esac exit 0 An unimportant aside: The previous users of the machine kept a messy home directory. Their home directory was /root. I've pasted a copy at http://www.pastebin.ca/2167496. My question: Why is there a /etc/init.d/mysql file on this Slackware machine? How could it have gotten there? P.S. This question is far from perfect. Please feel free to edit it.

Read the article

Merging multiple Google calendar feeds into one JSON object in javascript

- by Jeramy

I am trying to bring in the JSON feeds from multiple Google calendars so that I can sort the upcoming events and display the next X number in an "Upcoming Events" list. I have this working with Yahoo! pipes but I want to get away from using a 3rd party to aggregate. I think I am close, but I cannot get the JSON objects created correctly. I am getting the data into the array but not in JSON format, so I can't manipulate it. I have tried var myJsonString = JSON.stringify(JSONData); using https://github.com/douglascrockford/JSON-js but that just threw errors. I suspect because my variable is in the wrong starting format. I have tried just calling the feed like: $.getJSON(url); and creating a function concant1() to do the JSONData=JSONData.concat(data);, but it doesn't fire and I think it would produce the same end result anyway. I have also tried several other methods of getting the end result I want with varying degrees of doom. Here is the closest I have come so far: var JSONData = new Array(); var urllist = ["https://www.google.com/calendar/feeds/dg61asqgqg4pust2l20obgdl64%40group.calendar.google.com/public/full?orderby=starttime&max-results=3&sortorder=ascending&futureevents=true&ctz=America/New_York&singleevents=true&alt=json&callback=concant1","https://www.google.com/calendar/feeds/5oc3kvp7lnu5rd4krg2skcu2ng%40group.calendar.google.com/public/full?orderby=starttime&max-results=3&sortorder=ascending&futureevents=true&ctz=America/New_York&singleevents=true&alt=json&callback=concant1","http://www.google.com/calendar/feeds/rine4umu96kl6t46v4fartnho8%40group.calendar.google.com/public/full?orderby=starttime&max-results=3&sortorder=ascending&futureevents=true&ctz=America/New_York&singleevents=true&alt=json&callback=concant1"]; urllist.forEach(function addFeed(url){ alert("The URL being used: "+ url); if (void 0 != JSONData){JSONData=JSONData.concat($.getJSON(url));} else{JSONData = $.getJSON(url);} alert("The count from concantonated JSONData: "+JSONData.length); }); document.write("The final count from JSONData: "+JSONData.length+"<p>"); console.log(JSONData) UPDATE: Now with full working source!! :) If anyone would like to make suggestions on how to improve the code's efficiency it would be gratefully accepted. I hope others find this useful.: // GCal MFA - Google Calendar Multiple Feed Aggregator // Useage: GCalMFA(CIDs,n); // Where 'CIDs' is a list of comma seperated Google calendar IDs in the format: [email protected], and 'n' is the number of results to display. // While the contained console.log(); outputs are really handy for testing, you will probably waant to remove them for regular usage // Author: Jeramy Kruser - http://jeramy.kruser.me //onerror=function (d, f, g){alert (d+ "\n"+ f+ "\n");} if (!window.console) {console = {log: function() {}};} document.body.className += ' js-enabled'; // Global variables var urllist = []; var maxResults = 3; // The default is 3 results unless a value is sent var JSONData = {}; var eventCount = 0; var errorLog = ""; JSONData = { count: 0, value : { description: "Aggregates multiple Google calendar feeds into a single sorted list", generator: "StackOverflow communal coding - Thanks for the assist Patrick M", website: "http://jeramy.kruser.me", author: "Jeramy & Kasey Kruser", items: [] }}; // For putting dates from feed into a format that can be read by the Date function for calculating event length. function parse (str) { // validate year as 4 digits, month as 01-12, and day as 01-31 str = str.match (/^(\d{4})(0[1-9]|1[0-2])(0[1-9]|[12]\d|3[01])$/); if (str) { // make a date str[0] = new Date ( + str[1], + str[2] - 1, + str[3]); // check if month stayed the same (ie that day number is valid) if (str[0].getMonth () === + str[2] - 1) { return str[0]; } } return undefined; } //For outputting to HTML function output() { var months, day_in_ms, summary, i, item, eventlink, title, calendar, where,dtstart, dtend, endyear, endmonth, endday, startyear, startmonth, startday, endmonthdayyear, eventlinktitle, startmonthday, length, curtextval, k; // Array of month names from numbers for page display. months = {'0':'January', '1':'February', '2':'March', '3':'April', '4':'May', '5':'June', '6':'July', '7':'August', '8':'September', '9':'October', '10':'November', '11':'December'}; // For use in calculating event length. day_in_ms = 24 * 60 * 60 * 1000; // Instantiate HTML Arrays. summary = []; for (i = 0; i < maxResults; i+=1 ) { //console.log("i: "+i+" < "+"maxResults: "+ maxResults); if (!(JSONData.value.items[i] === undefined)) { item = JSONData.value.items[i]; // Grabbing data for each event in the feed. eventlink = item.link[0]; title = item.title.$t; // Only display the calendar title if there is more than one calendar = ""; if (urllist.length > 1) { calendar = '<br />Calendar: <a href="https://www.google.com/calendar/embed?src=' + item.gd$who[0].email + '&ctz=America/New_York">' + item.author[0].name.$t + '<\/a> (<a href="https://www.google.com/calendar/ical/' + item.gd$who[0].email + '/public/basic.ics">iCal<\/a>)'; } // Grabbing event location, if entered. if ( item.gd$where[0].valueString !== "" ) { where = '<br />' + (item.gd$where[0].valueString); } else { where = (""); } // Grabbing start date and putting in form YYYYmmdd. Subtracting one day from dtend to fix Google's habit of ending an all-day event at midnight on the following day. dtstart = new Date(parse(((item.gd$when[0].startTime).substring(0,10)).replace(/-/g,""))); dtend = new Date(parse(((item.gd$when[0].endTime).substring(0,10)).replace(/-/g,"")) - day_in_ms); // Put dates in pretty form for display. endyear = dtend.getFullYear(); endmonth = months[dtend.getMonth()]; endday = dtend.getDate(); startyear = dtstart.getFullYear(); startmonth = months[dtstart.getMonth()]; startday = dtstart.getDate(); //consolidate some much-used variables for HTML output. endmonthdayyear = endmonth + ' ' + endday + ', ' + endyear; eventlinktitle = '<a href="' + eventlink + '">' + title + '<\/a>'; startmonthday = startmonth + ' ' + startday; // Calculates the number of days between each event's start and end dates. length = ((dtend - dtstart) / day_in_ms); // HTML for each event, depending on which div is available on the page (different HTML applies). Only one div can exist on any one page. if (document.getElementById("homeCalendar") !== null ) { // If the length of the event is greater than 0 days, show start and end dates. if ( length > 0 && startmonth !== endmonth && startday === endday ) { summary[i] = ('<h3>' + eventlink + '">' + startmonthday + ', ' + startyear + ' - ' + endmonthdayyear + '<\/a><\/h3><p>' + title + '<\/p>'); } // If the length of the event is greater than 0 and begins and ends within the same month, shorten the date display. else if ( length > 0 && startmonth === endmonth && startyear === endyear ) { summary[i] = ('<h3><a href="' + eventlink + '">' + startmonthday + '-' + endday + ', ' + endyear + '<\/a><\/h3><p>' + title + '<\/p>'); } // If the length of the event is greater than 0 and begins and ends within different months of the same year, shorten the date display. else if ( length > 0 && startmonth !== endmonth && startyear === endyear ) { summary[i] = ('<h3><a href="' + eventlink + '">' + startmonthday + ' - ' + endmonthdayyear + '<\/a><\/h3><p>' + title + '<\/p>'); } // If the length of the event is less than one day (length < = 0), show only the start date. else { summary[i] = ('<h3><a href="' + eventlink + '">' + startmonthday + ', ' + startyear + '<\/a><\/h3><p>' + title + '<\/p>'); } } else if (document.getElementById("allCalendar") !== null ) { // If the length of the event is greater than 0 days, show start and end dates. if ( length > 0 && startmonth !== endmonth && startday === endday ) { summary[i] = ('<li>' + eventlinktitle + '<br />' + startmonthday + ', ' + startyear + ' - ' + endmonthdayyear + where + calendar + '<br /> <\/li>'); } // If the length of the event is greater than 0 and begins and ends within the same month, shorten the date display. else if ( length > 0 && startmonth === endmonth && startyear === endyear ) { summary[i] = ('<li>' + eventlinktitle + '<br />' + startmonthday + '-' + endday + ', ' + endyear + where + calendar + '<br /> <\/li>'); } // If the length of the event is greater than 0 and begins and ends within different months of the same year, shorten the date display. else if ( length > 0 && startmonth !== endmonth && startyear === endyear ) { summary[i] = ('<li>' + eventlinktitle + '<br />' + startmonthday + ' - ' + endmonthdayyear + where + calendar + '<br /> <\/li>'); } // If the length of the event is less than one day (length < = 0), show only the start date. else { summary[i] = ('<li>' + eventlinktitle + '<br />' + startmonthday + ', ' + startyear + where + calendar + '<br /> <\/li>'); } } } if (summary[i] === undefined) { summary[i] = "";} //console.log(summary[i]); } console.log(JSONData); // Puts the HTML into the div with the appropriate id. Each page can have only one. if (document.getElementById("homeCalendar") !== null ) { curtextval = document.getElementById("homeCalendar"); console.log("homeCalendar: "+curtextval); } else if (document.getElementById("oneCalendar") !== null ) { curtextval = document.getElementById("oneCalendar"); console.log("oneCalendar: "+curtextval); } else if (document.getElementById("allCalendar") !== null ) { curtextval = document.getElementById("allCalendar"); console.log("allCalendar: "+curtextval); } if (curtextval.innerHTML.length < 100) { errorLog += '<div id="noEvents">No events found.</div>'; } for (k = 0; k<maxResults; k+=1 ) { curtextval.innerHTML = curtextval.innerHTML + summary[k]; } if (eventCount === 0) { errorLog += '<div id="noEvents">No events found.</div>'; } if (document.getElementById("homeCalendar") === null ) { curtextval.innerHTML = '<ul>' + curtextval.innerHTML + '<\/ul>'; } if (errorLog !== "") { curtextval.innerHTML += errorLog; } } // For taking in each feed, breaking out the events and sorting them into the object by date function sortFeed(event) { var tempEntry, i; tempEntry = event; i = 0; console.log("*** New incoming event object #"+eventCount+" ***"); console.log(event.title.$t); console.log(event); //console.log("i = " + i + " and maxResults " + maxResults); while(i<maxResults) { console.log("i = " + i + " < maxResults " + maxResults); console.log("Sorting event = " + event.title.$t + " by date of " + event.gd$when[0].startTime.substring(0,10).replace(/-/g,"")); if (JSONData.value.items[i]) { console.log("JSONData.value.items[" + i + "] exists and has a startTime of " + JSONData.value.items[i].gd$when[0].startTime.substring(0,10).replace(/-/g,"")); if (event.gd$when[0].startTime.substring(0,10).replace(/-/g,"")<JSONData.value.items[i].gd$when[0].startTime.substring(0,10).replace(/-/g,"")) { console.log("The incoming event value of " + event.gd$when[0].startTime.substring(0,10).replace(/-/g,"") + " is < " + JSONData.value.items[i].gd$when[0].startTime.substring(0,10).replace(/-/g,"")); tempEntry = JSONData.value.items[i]; console.log("Existing JSONData.value.items[" + i + "] value " + JSONData.value.items[i].gd$when[0].startTime.substring(0,10).replace(/-/g,"") + " stored in tempEntry"); JSONData.value.items[i] = event; console.log("Position JSONData.value.items[" + i + "] set to new value: " + event.gd$when[0].startTime.substring(0,10).replace(/-/g,"")); event = tempEntry; console.log("Now sorting event = " + event.title.$t + " by date of " + event.gd$when[0].startTime.substring(0,10).replace(/-/g,"")); } else { console.log("The incoming event value of " + event.gd$when[0].startTime.substring(0,10).replace(/-/g,"") + " is > " + JSONData.value.items[i].gd$when[0].startTime.substring(0,10).replace(/-/g,"") + " moving on..."); } } else { JSONData.value.items[i] = event; console.log("JSONData.value.items[" + i + "] does not exist so it was set to the Incoming value of " + event.gd$when[0].startTime.substring(0,10).replace(/-/g,"")); i = maxResults; } i += 1; } } // For completing the aggregation function complete(result) { var str, j, item; // Track the number of calls completed back, we're not done until all URLs have processed if( complete.count === undefined ){ complete.count = urllist.length; } console.log("complete.count = "+complete.count); console.log(result.feed); if(result.feed.entry){ JSONData.count = maxResults; // Check each incoming item against JSONData.value.items console.log("*** Begin Sorting " + result.feed.entry.length + " Events ***"); //console.log(result.feed.entry); result.feed.entry.forEach( function(event){ eventCount += 1; sortFeed(event); } ); } if( (complete.count-=1)<1 ) { console.log("*** Done Sorting ***"); output(); } } // This is the main function. It takes in the list of Calendar IDs and the number of results to display function GCalMFA(list,results){ var i, calPreProperties, calPostProperties1, calPostProperties2; calPreProperties = "https://www.google.com/calendar/feeds/"; calPostProperties1 = "/public/full?max-results="; calPostProperties2 = "&orderby=starttime&sortorder=ascending&futureevents=true&ctz=America/New_York&singleevents=true&alt=json&callback=?"; if (list) { if (results) { maxResults = results; } urllist = list.split(','); for (i = 0; i < urllist.length; i+=1 ){ if (urllist[i] === 0){ urllist.splice(i,1);} else{ urllist[i] = calPreProperties + urllist[i] + calPostProperties1+maxResults+calPostProperties2;} } console.log("There are " + urllist.length + " URLs"); urllist.forEach(function addFeed(url){ $.getJSON(url, complete); }); } else { errorLog += '<div id="noURLs">No calendars have been selected.</div>'; output(); } }

Search Results

Search found 992 results on 40 pages for 'patrick j collins'.

Page 40/40 | < Previous Page | 36 37 38 39 40

- by user9135656

- by Alois Kraus

- by Anthony Trudeau

- by D'Arcy Lussier

- by gmcalab

- by user3721900

- by dbostream

- by alanc

- by PaddyO

- by user244190

- by Martty Rox

- by thangchung

- by El Barto

- by jasonspiro

- by Jeramy

< Previous Page | 36 37 38 39 40