Search Results

Search found 2010 results on 81 pages for 'scan'.

Page 40/81 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• Asterisk does not recognise DTMF tones from mobile phones

  - by Eugene van der Merwe

  We have an Asterisk 1.8.7.0 (the Elastix derivative) switchboard. Every since a month ago, seemingly out of the blue, the switchboard does not recognise DTMF tones any more from mobile phones. Testing the switchboard using 7777 works. Testing the switchboard from a normal phones works. Testing the switchboard from a mobile phone fails. Looking at the log file I can't see anything. I used 'asterisk -rvvvv' and 'tail -f /var/log/asterisk/full' to see the live output and scan the logs. I guess I don't see anything because it's simply not recognising the DTMF tones. I did brief research and found an old setting for SIP phones, 'rfc2833compensate=yes', and tried adding this to 'sip_general_custom.conf'. After that I did 'core restart when convenient' but that didn't make any difference. Could anyone give me some additional troubleshooting steps?

  Read the article

• Aironet 1200's Auto-Channel Feature: When should it be used?

  - by Josh Brower

  In our building we have around 25 1200 series Aironets, with a bit of overlap in some areas. Up until this point, we have had them deployed in alternating 1/6/11 channels, but we are wondering if we would get better performance if we used the auto-channel select feature. In looking around, I have seen comments that this feature should not be used as the WAP does a channel scan only on the radio startup, but I have not found this in any Cisco docs. Anybody have anymore information, or real-world experience with this feature? Thanks! -Josh

  Read the article

• Scanned JPEGs are large and slow to load - can they be optimized losslessly?

  - by Alistair Knock

  I have hundreds of JPEG photographs which were scanned about 5 years ago from negative using a Konica Minolta DiMAGE Scan Dual IV. The dimensions are ~4500x3000, and the filesize is around 12Mb, compared to shots from a DSLR with dimensions of 3000x2300 and filesize of 2-4Mb (actually, these are the output from a RAW convertor). The filesize is obviously quite a big difference, but the issue that's bothering me is that the (perceived) loading time is at least 10 times slower. Is this size/speed discrepancy likely to be because the scanner software saved the JPEGs inefficiently / using an old compression format, or is it simply that the scanned negatives contain much more "detail" (in the form of grain/noise) than the digital images? If the former, is there a way to losslessly optimize them? I've tried re-exporting the scanned files to full size JPEG from my RAW software but the filesize is pretty much the same. Both files will have been saved at 100 quality.

  Read the article

• Removing emails from all mailbox with certain text in subject

  - by Doug Luxem

  So, we had an errant program kick off about 15,000 emails to our users. I have our spam filters now blocking these on the edge until that gets resolved, but now I would like to clean our our users' mailboxes for them. Is there anyway with Exchange 2007 to remove all emails with certain text in the subject line? It would need to be a partial match because the subject changes slightly for each email. I am trying to do this with Forefront's manual scan job + content filter, but it does not seem to like partial matches on the subject.

  Read the article

• Unable to load memcache.so extension ??

  - by billyduc

  I built php from source with configure command : './configure' '--prefix=/usr/local/php-5.2.8' '--with-config-file-path=/etc --with-config-file-scan-dir=/etc/php.d' '--with-apxs2=/usr/local/httpd/bin/apxs' '--with-mysql=/usr/local/mysql/' '--with-zlib' I installed php memcache extension : wget http://pecl.php.net/get/memcache tar -zxvf memcache-2.2.5.tgz cd memcache-2.2.5 phpize ./configure --enable-memcache make make install I add to my /usr/local/lib/php.in extension=memcache.so Rebooted my apache and run php-m but php seem doesn't load memcache extension I followed this solution from this site http://www.howtoforge.com/forums/showthread.php?t=26554 I added full path extension=/usr/local/lib/php/extensions/no-debug-non-zts-20060613/memcache.so rebooted apache But it didn't load memcache extension ! I google around but the same issue ! How can I load this extension _ _"

  Read the article

• Why would a machine ruin three "power supply"s?

  - by Moshe

  A client of mine has an XP era eMachines. The power supply has died and been replaced 3 times. I've discharged the motherboard and checked the surge protector. In the middle of a scan with ComboFix, the machine died. It powers on and hangs before the BIOS and shows a solid yellow light. I believe the model # is T5062 or something like that. Aside from a bad outlet, what would cause the PSU to die a few times?

  Read the article

• My website is infected, I restored a backup of the uninfected files, how long will it take to un-mark as dangerous?

  - by Cyclone

  My website www.sagamountain.com was recently infected by a malware distributor (or at least I think it may have been). I have removed all external content, google ads, firefly chat, etc. I uploaded a backup from a few weeks ago, when there was no issue. I patched the SQL injection hole. Now, how long will it take to unmark it as dangerous? Where can I contact google? I am not sure if this is the right place to post it, but since it may have been a server issue I may as well. Can sites inject base64 code via a virus on the whole server, or is it only via sql injection? Thanks for the help, viruses freak me out. Is there an online virus scanner that can scan my page and tell me what is wrong?

  Read the article

• Dell U271 monitor DisplayPort suddenly not working

  - by Amir Latif

  My new(ish) Dell U271 took a bit of a knock and it now suddenly doesn't recognise the Macbook plugged into it via DisplayPort - this had been working great for several months up until now. When I "Scan Sources", it doesn't find anything on DisplayPort. However, one suspicious behaviour leads me to think all might not be lost. When the Mac is woken from sleep, this used to kick the monitor in (as an monitor would) and while it no longer does that, the light on the monitor does go from standby orange to blue briefly, then the monitor says it's going into "power save" mode. It seems like it gets some kinda signal. Any ideas on how I can diagnose the problem? I'm trying to find another mac but no one near me has one ...

  Read the article

• Exchange Server 2007 Transport Errors -- SMTP Session Hangs

  - by devviedev

  Hello, I was doing some changes to the server (writing an Transport Agent). After trying to install it, I started to get some errors. Now, when connecting to the SMTP server the session hangs just after finishing the DATA section. I'm not sure what happened, I disabled my transport agent and uninstalled it, then restarted the server. The problem persists. In the Event Viewer, four of the same errors show up: Source: FSCTransportScanner Category: Scan Error Event ID: 5021 Description: Unable to retrieve internet monitor interface. What could have happened?

  Read the article

• Windows 7 Bluetooth Configuration

  - by ahsteele

  I have Bluetooth installed in my laptop. The Bluetooth is enabled according to the status light. However, I do not see Bluetooth listed in device manager or have a control panel option for it. A scan for new hardware doesn't turn up Bluetooth. Nor are any devices listed with a Yellow Exclamation Point. I do have three USB Hubs Listed as "Generic USB Hub." There is no Bluetooth icon in the notification area and Bluetooth is not listed under Devices and Printers. What am I missing?

  Read the article

• How to make sure Windows PC is reasonably secure?

  - by Coder

  I'm not much of a network and network security expert, but I need to add an existing Windows PC to a network with always on connection. The problem is, I have no idea if the PC is really clean, and, actually, no knowledge to check it. I scanned the PC with Process Explorer to verify if all running processes are signed, ran an AVG scan, but this is where my knowledge ends. IIRC, there can be bad code attached to svchost or something, bad drivers, and so on, but I have no idea how to check all those things. Reformatting the PC is unfeasible as of now. Are there any suggestions on what I could do?

  Read the article

• PDF with 200 DPI JPEGs look blurry in viewer

  - by queueoverflow

  I often scan images, and I usually do that as 200 DPI JPEG files. If I look at them in Gwenview (Linux image viewer) the text looks readable, and on 100% it looks perfectly sharp. When I convert them into a PDF, using convert from the Imagick package and open that in Okular or Evince (Linux document viewer) the text looks blurry. I wrote a little script that creates a HTML page with all the images and opens it in the browser. Firefox scales the images a little sharper than the PDF viewers. Firefox JPEGs: Evince PDF Is there any way to get the PDF to scale the images sharply?

  Read the article

• Removing emails from all mailboxes with certain text in subject

  - by Doug Luxem

  So, we had an errant program kick off about 15,000 emails to our users. I have our spam filters now blocking these on the edge until that gets resolved, but now I would like to clean our our users' mailboxes for them. Is there anyway with Exchange 2007 to remove all emails with certain text in the subject line? It would need to be a partial match because the subject changes slightly for each email. I am trying to do this with Forefront's manual scan job + content filter, but it does not seem to like partial matches on the subject.

  Read the article

• Colored blocks on boot

  - by stackzerad

  When my laptop tries to boot right after POST I see colored blocks with flashing symbols in them. I am able to boot from windows PE cd. Tried fixboot and fixmbr with no success. I have also tried replacing boot files (ntldr, io.sys etc..) and removing video card drivers from windows\system32\drivers. The drive is seagate 2.5 ATA 160GB and has one NTFS partition on it. I have already fixed this issue by reformating the drive and reinstalling everything but after couple of weeks I get the same issue again. The diagnostics software shows no bad sectors on it and virus scan didn't find anything. Does anybody have an idea what this might be? UPDATE: tried defragmenting the hard drive just in case, but still no luck

  Read the article

• How to verify if a clean windows 7 install was done or an upgrade over vista was what the tech did?

  - by Melody

  I'd like to know if the install was truly done as a clean Windows 7 or If the windows 7 was installed over the vista as an upgrade - 32 bit and ultimate verstion? I noticed hp game stuff (wild tanget or something ) during an virus scan and it was not suppose to be in a clean install...so now I'm wondering how to verify what kind of install Really happened/ Any help? I'd appreaciate knowing how to know the difference, if I was led to believe something that was not true...I paid for a clean install. Did I get that or not is my concern Thank you so much Melody

  Read the article

• Windows 7 trying to turn off UAC every time Windows starts

  - by Mehper C. Palavuzlar

  I have strange problem on my HP laptop. This began to happen recently. Whenever I start my machine, Windows 7 Action Center displays the following warning: You need to restart your computer for UAC to be turned off. I never disable UAC, but obviously some process or virus (I'm not sure, only guessing) causes this. As soon as I get this warning, I head for the UAC settings, and re-enable UAC to dismiss this warning. This is a bothersome situation as I really don't know what causes the problem. I have run a full scan on the computer for any probable virus activity, but TrendMicro OfficeScan said that no viruses have been found. There are no other strange incidents on the machine. Everthing works fine except this bizarre incident. How can I learn what process is trying to turn off UAC? What way should I follow to overcome this problem?

  Read the article

• Facebook doesn't work on computer, but work on mobile device, both use the same router

  - by sasa

  I have a very strange problem and I'm thinking that can be problem with dns or something similar, but not sure and don't know how to solve. My computer is connected to router and every site works fine except facebook (Chrome and Firefox). Chrome shows "Error 101 (net::ERR_CONNECTION_RESET): The connection was reset." But, on mobile device witch is connected to the same router facebook works fine (Fb application and Delphin browser). Pinging facebook works fine. Clearing cookies and cache didn't help. Also, I performed antivirus and antimalware scan and there is nothing. What can be a problem? Update: I'm also connect notebook on that wifi router, and on it works fine. nslookup facebook.com Server: UnKnown Address: 192.168.1.1 Non-authoritative answer: Name: facebook.com Addresses: 2a03:2880:2110:3f01:face:b00c:: 2a03:2880:10:1f02:face:b00c:0:25 2a03:2880:10:8f01:face:b00c:0:25 69.171.224.37 69.171.229.11 69.171.242.11 66.220.149.11 66.220.158.11

  Read the article

• How to close the logon process named NtLmSsp ?

  - by Aristos

  I have a windows 2003 server and time to time I am getting many login failures like this one. Logon Failure: Reason: Unknown user name or bad password User Name: administrator Domain: xx.xx.xx.xx Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: XLHOST Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: 173.45.70.100 <- hacker Source Port: 4722 AND Logon attempt by: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0 Logon account: user Source Workstation: XLHOST Error Code: 0xC0000064 The question is, how can I close this process of login ?, what I have left open and some one can try to login ? Some notes: I login to the server using tunneling, nothing is open except dns, email, and web ports, not even ftp, and all default ports are change and hidden. I also monitor port scan and capture any one that try to find the hidden ports. Probably it is something open... Thank you in advanced.

  Read the article

• Any way to know what files were in a broken ZFS pool?

  - by Erik Tjernlund

  I have a large ZFS pool of 4 combined drives. Now, the filesystem can not be mounted: pool: tank state: UNAVAIL status: One or more devices could not be opened. There are insufficient replicas for the pool to continue functioning. action: Attach the missing device and online it using 'zpool online'. see: http://www.sun.com/msg/ZFS-8000-3C scan: none requested config: NAME STATE READ WRITE CKSUM tank UNAVAIL 0 0 0 insufficient replicas c10t0d0 ONLINE 0 0 0 c8t0d0 UNAVAIL 0 0 0 cannot open c8t1d0 ONLINE 0 0 0 c10t1d0 ONLINE 0 0 0 Probably a broken drive (c8t0d0). I'm not overly concerned by the loss of the data, but I'd love to know exactly which files were in that pool. Is there any way to get a listing of what files were there?

  Read the article

• Giving a scanner-printer-combo a zoom function when copying ?

  - by ldigas

  You know how everytime you go to a photocopying shop, photocopiers always have a neat zoom function (it can take whatever you give it, and zoom it in/out, so your copy comes out smaller or larger). I got one of those neat 3-in-one printer machines. It has a copy button on it, but it also has some software that comes with it (Epson SX115 to be exact is the model). Apart from going into some photo manipulation application, is there some way (software) to give it that feature. So, in short, I need something that can scan a page, scale it to let's say, a quarter of its size, and then print it out ? Anyone knows of anything like that ?

  Read the article

• Need to upgrade DDR2 RAM on HP Desktop

  - by jds

  I have this HP Pavilion Desktop. As you can see, that page says the memory speed supported is PC2-4200. It currently has a 512 MB stick - CPU-Z Screenshots: hxxp://i41.tinypic.com/j5clj6.jpg and hxxp://i39.tinypic.com/20tldlc.jpg However, a crucial.com scan gives a slightly different report - hxxp://crucial.com/systemscanner/viewscanbyid.aspx?id=5718CFE831D926C3 It says the system can support PC2-5300 memory. So my question is which one should I trust? I want to upgrade the computer's ram to 2 GB (the maximum supported), because XP Media Center is giving me problems and I will install Windows 7 on this. PC2-6400 is the most common DDR2 memory I have been able to find here in the market. Will it cause any problems if I install 2 × 1 GB PC2-6400 DDR2 memory sticks (in dual channel) in this computer, (afaik, it will just run at the lower speed of 533 MHz, or whatever the motherboard supports), or do I absolutely need to get PC2-4200 sticks?

  Read the article

• Bitdefender rescue disk does not show my C drive

  - by Nilesh

  My machine (winXP) is infected with virus and I am unable to start my machine. Therefore I have used BitDefender rescue disk to remove the viruses. But I am not able to see my C drive. All other drivers are able to see and scan. Even after I removed all viruses, my machine is not starting. Giving the same error message. I think due to viruse it is not visible to bitdefender. Please help me out. Appreciate your help.

  Read the article

• What is the best way to run ClamAV on Windows Server 2008 R2

  - by gabbsmo

  I'm hosting a Wordpress-site on Windows Server 2008 RS and want to scan all files that are uploaded by users for viruses using this plugin http://wordpress.org/extend/plugins/upload-scanner/. I'm on a really tight budget (no profit) so ClamAV seem like a good choice. What is the best way to run ClamAV under these circumstances? I'm concidering the following options: Just running the raw windows build from http://sourceforge.net/projects/clamav/ an setup definition updates with task scheduler. Any way to automate updates of the scanner (binaries)? Using a "distro" like ClamWin or Immunet (advertised on clamav.net). Any suggestions are welcome.

  Read the article

• How do I troubleshoot CanoScan LIDE20 on Ubuntu 9.10 in VirtualBox?

  - by kara-marfia

  This may be a VirtualBox question more than anything else. The host OS is Win7, which sees the scanner, but has no drivers for it. VirtualBox sees & recognizes the scanner as "Cannon Scan" and shows "state captured" when I hover over USB devices. Searching gives me many happy reports of this particular scanner being well supported, and that SANE should work with it immediately (also listedin the Supported Hardware List. I get "no devices available" from XSane... and I'm not sure where else I can check. I'd like to see if VirtualBox is telling the truth and find out if the USB port is actually being fed into the virtual OS. Can anyone point me in the right direction of where/how to do that in Ubuntu? Or other bright ideas. I'm starting with a little project to add some zing to my beginner linux studies - I'm sure I haven't checked some obvious things, because I don't know them yet. ;)

  Read the article

• IIS not listening over external network, all other traffic working

  - by Beuy

  Hello there, I have a very odd situation, I have a server (let's call it X) running 2008 R2 with two NIC's in it, one is connected to the work domain and has a subnet of 192.168.10.0/24 the other is connected to a ADSL connection and has a subnet of 192.168.1.0/24. The server has IIS installed. On the ADSL connection I have setup a dynamic dns and port forwarding to allow external HTTP, HTTPS, FTP and RDP connections. FTP and RDP are working fine however neither HTTP or HTTPS are working at all. I can browse the websites by going to localhost on the machine, the HTTP and HTTPS ports appear as "Filtered" when I try to scan them using PortQueryUI and browsers respond with a "Server took too long to load or was not responding" error. This was working fine just a few days ago, Windows firewall is disabled I don't have any software firewall on it. And I'm really lost. Any help would be great.

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >