Search Results

Search found 1627 results on 66 pages for 'serial'.

Page 40/66 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• MSA20 RAID5 recovery failure due to URE on another disk

  - by Andrey

  I have MSA20 with one disk array on 12 disks and 3 LUNs on it (each raid 5). A few days ago one disk in one of the LUNs was failed and I replaced it. But raid5 recovering failed at 13% and I see in ADU report that one of the disk has "Errors Logged = 5566" and according SCSI specifications it is URE (Sense Code=0x11, Qualifier=0x00). In serial log I also see URE error. It seems that Raid5 can't be rebuilt because of this. So I have a few questions: Is there a way to recover raid5 still? If I leave new disk that was replaced and remove disk with URE, will other LUNs be destroyed or just failed LUN? If all LUNs will fail what is the sense to make each LUN with own raid on one disk group array if 2 failed disk can destroy all? As I understand the preferred way is to create one disk array for one LUN in future and not one array with few LUNs? Thanks.

  Read the article

• Need help connecting to SRW2024 Linksys Switch from CentOS 5.4

  - by sxanness

  I am configured a Linksys SRW2024, I accidently changed the management VLAN before changing the VLAN configuration thus I can no longer access it with the net. The only way I have read to get into it now is via a console cable, my laptop with me is a MacBook Pro with no Serial port connection, apart from driving around a town that I am unfamilar with to find an adapter I thought I would try on a Linux box. I have a CentOS 5.4 server here (PowerEdge R300) that I am trying to use to talk to the switch. I tried minicom first but I do not see the console. Another site suggested the screen command. I tried "screen /dev/ttyS0 38400" but all I get is blinking curser, I do not see the configuration. I don't know if anyone here as any tips but I hope someone does. Thank You,

  Read the article

• Cisco 877 as PPPoA/PPPoE bridge (no routing) - how to make it listen to IP for management?

  - by Ingmar Hupp

  I have a Cisco 877 configured to bridge ADSL with PPPoA to PPPoE on Vlan1. This works fine, but in this mode the only way I can configure the Cisco is via the serial console. I'd like to have the Cisco also listen on an IP address so I can telnet/ssh into it. I think the right way to go about this would be via bridge irb, but I'm not sure exactly how (or if that's even the right direction). IOS is 12.4T and my current config (cut down to essentials) is: no ip routing no ip cef ! ! interface ATM0 no ip address no ip route-cache no atm ilmi-keepalive pvc 0/38 encapsulation aal5snap ! dsl operating-mode auto bridge-group 1 ! ! interface Vlan1 no ip address no ip route-cache bridge-group 1 Just setting an IP address on Vlan1 didn't have the desired effect, but surely this must be possible somehow (the Draytek Vigor 120 even does it by default).

  Read the article

• ARM Debian (squeeze) USB driver with mismatch 3.3.3 kernel but /lib/modules/2.6.36

  - by frank

  Hei guys, my sheevaplug embedded server works fine, but when I wanted to use USB, the device gets not attached to /dev/tty/USB0 lsusb shows correctly: Bus 001 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port an modprobe usbserial raises: FATAL: Could not load /lib/modules/3.3.3/modules.dep: No such file or directory in the /lib/modules/ Folder there is instead a 2.6.36-Folder uname -r gives 3.3.3 How can I overcome this mismatch? Can I create a symlink? I can't flash this embedded device since it is deployed somewhere, only ssh? Please advise!

  Read the article

• DEBIAN-likes to detect the keyboard layout

  - by blietaer

  I would like to find out the current keyboard layout of a debian-like OS. env-var? /etc/? locales? Context: __ Playing around with RFID reader in serial, using python to output to console through uinput/ The thing is, doing the conversion from fake-rfid-keyboard-codes to code sent to uinput/, I would better know if I am using a QWERTY or an AZERTY ('a' becoming 'q', etc...) Back here in Belgium, especially during the event I am working on we are highly susceptible to have both keyboard layouts, I have to support both 'on-the-fly' __ Thanx !

  Read the article

• Providing high availability and failover using MySQL on EC2

  - by crb

  I would like to have a highly-available MySQL system, with automatic failover, running on Amazon EC2 instances. The standard approach to solving this is problem Heartbeat + DRBD, but I've found a lot of posts suggesting DRBD doesn't work on EC2, though none saying exactly why. Obviously, a serial heartbeat or distinct network is out of the question in the virtualised environment. It would also be good to have the different servers be in different availability zones, but we're getting into a much harder problem there. What are peoples' opinion on having a high uptime solution in "the cloud"? Note: This question was asked before RDS with multi-AZ was announced, which is the nice automatic answer for today's modern IT professional. :)

  Read the article

• virsh console and tty size

  - by pehrs

  I have a virtualization server to which I connect over ssh. If I now change the size of the window it will automatically propagate to the server. It's most easily seen using stty -a, checking the columns and row values. I then use virsh console to connect to the serial interface on a KVM based virtual machine. When I now change the size of the window it does not propagate to the virtual server. This is most easily seen by checking stty -a, which is not updated on the virtual machine when I change window size. This means that line breaks does not work correctly in the terminal and any application that relies on window size for formatting (emacs, man, etc) gets messed up unless the window size on the client matches the default size on the server. A workaround is to manually set the window size to match the client window using stty, but I wonder if there is any way to get this information to propagate and set the window size in the virtual machine automatically.

  Read the article

• Copy large files to multiple machines on a LAN

  - by Jonathan Callen

  I have a few large files that I need to copy from one Linux machine to about 20 other Linux machines, all on the same LAN as quickly as is feasible. What tools/methods would be best for copying these files, noting that this is not going to be a one-time copy. These machines will never be connected to the Internet, and security is not an issue. Update: The reason for my asking this is because (as I understand it) we are currently using scp in serial to copy the files to each of the machines and I have been informed that this is "too slow" and a faster alternative is being sought. According to what I have been told, attempting to parallelize the scp calls simply slows it down further due to hard drive seeks.

  Read the article

• kernel warning disk error for command write - solaris svm

  - by help_me

  Recently this warning came up on my message logs, scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0): Oct 27 00:14:44 Error for Command: write(10) Error Level:Retryable Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Requested Block: 101515828 Error Block: 101515828 Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Number: 0441B9B5H Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Sense Key: Hardware Error Oct 27 00:14:44 scsi: [ID 107833 kern.notice] ASC: 0x19 (defect list error), ASCQ: 0x0, FRU: 0x2 This is showing signs of disk failing in my opinion. I have not seen the messages re-occurring. This is on a Solaris 9 Sparc system V240. The disks are managed by SVM and "metadb" is showing the flags as "a" Are there any tests or indications as to check/see if the disk is actually failing or was that error message initiated by something else. Thank you!

  Read the article

• How to analyze a wifi network with many devices

  - by Caveatrob

  My friend has a wifi network with an x-box, a wii, a playstation, and two nintendo portables. She's also got 2-3 PC's and a network printer. She's got a wifi repeater as well. She claims that she didn't have any issues for months with everything working together, and suddenly everything stopped disconnecting. I haven't been over there yet - wanted to figure out the best way to diagnose the thing. I asked her to send me the stats on the booster and the modem, etc: The booster is Netgear serial #2ac2195506b95 The modem is Cisco Linksys e1500 #10910c12129103 We have a sprint router thru centurylink and they said it is working fine 660 series

  Read the article

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have alot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• solaris + EMC + power-path

  - by yael

  please advice - when I run powercf command on my Solaris machine , which changes this command do on the EMC storage , or on Solaris file system ? from maanual page: DESCRIPTION During system boot on Solaris hosts, the powercf utility configures PowerPath devices by scanning the HBAs for both single-ported and multiported storage system logical dev- ices. (A multiported logical device shows up on two or more HBAs with the same storage system subsystem/device identity. The identity comes from the serial number for the logical device.) For each storage system logical device found in the scan of the HBAs, powercf creates a corresponding emcpower device entry in the emcp.conf file, and it saves a primary path and an alternate primary path to that device.

  Read the article

• NAT : understanding about interconnection

  - by PITCHY

  English version below J'ai 2 routeurs A et B relié en série avec les ip respectives ( 10.0.0.1/30 10.0.0.2/30) sur le routeur A j'ai activé la fonction NAT avec un pool (200.0.0.1 - 200.0.0.15/28). Lorsque je sors je prends donc un ip du pool par exemple 200.0.0.10. Comment ça fonctionne sachant que ma nouvelle ip (200.0.0.10) ne se trouve pas sur le meme réseau que mon interface de destination (10.0.0.2)? English: I have 2 routers A and B, interconnected with a serial connection, with the ip's 10.0.0.1/30 for A and 10.0.0.2/30 for B. On router A NAT was activated with the pool 200.0.0.1 - 200.0.0.15/28. When connection to this router, I get an ip from the pool, for example 200.0.0.10. Knowing my new ip is 200.0.0.10, which is not on the same network as my destination interface (10.0.0.2), how can this work?

  Read the article

• How can I connect to some old Sun servers?

  - by hellsgate

  We have some old Sun servers (V125, V210, V240, T2000 amongst others) sitting unused and I've been asked to find out if there is anything useful on them before they get wiped and disposed of. However, I've been unable to connect to any of the servers. I tried connecting the servers to a router using the Net Management, Serial Management and standard Ethernet ports. When doing this, I ran 'nmap -sP' from my Linux desktop before and after connecting a server so I could compare the two outputs and hopefully work out what IP address had been assigned to the server, but it didn't appear to have received one. Unfortunately only one of the servers has a VGA output. I was able to access this machine as we still have the login details stored in KeePass, but I've no idea at the moment on how I should go about connecting to any of the others. Any suggestions?

  Read the article

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have a lot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• Transferring to a SSD using Windows Explorer?

  - by Nick

  I've just bought a new SSD (regretting this already) which I want to make my primary hard drive on my new computer. It's a fresh Windows 8 install, so I'm wondering if I can just copy the entire contents of C: onto my new SSD drive, or will I need to copy other things too such as boot records? I don't have a CD drive unfortunately (I removed it to put in the SSD - it's a very small HTPC) and I don't have any USB stick to make a bootable copy of Clonezilla or similar. UPDATE: I have decided to re-install Windows 8 from scratch onto the SSD, the problem is obtaining the serial key that is embedded into the BIOS. I actually have a spare, unused product key from my desktop I'm writing on now, but I'd rather not use that when I already have a valid key in my new HTPC :( Thanks :)

  Read the article

• Cisco: changing VTP mode server/client to transparent

  - by J. Smith

  I have around 40 L2 switches (2960, 3560, 3500, 3750) running in VTP client mode and one L3 switch (6500) running in VTP server mode, all connected together. I would like to switch everything in VTP transparent mode without any interruption of service. I've already test on a poc version with 3 switches (Catalyst 2950, 3560 and 3750). Using serial and SSH connection, it is seems working but i'm not sure it is enough representative compare to the real network. Knowing that the VTP Pruning is enabled, I am wondering what would be the best procedure to proceed the changement. I've read that we could lost connection by keeping it enabled. Should I change the server or clients first? Is it important to change the VTP domain and VTP Pruning parameters?

  Read the article

• Tips for locating my stolen computer

  - by user379468

  I'm in a bit of a panic, my new Powerbook laptop was stolen. I had no mobile me, or security software installed on the computer. I have the mac address of the computer as well as the serial number. Is there a hacky way to do this? I was even thinking perhaps of trying to use bluetooth, I know I had it set to discoverable. and I know the "name" of the computer, perhaps there is app that can scan the names of bluetooh computers in the vicinity? If there some third party you can get to scan the internet for your mac address? Any glimmer of hope would really help

  Read the article

• How to generate good serials for DNS zones with Puppet?

  - by Bittrance

  My tradition is to set all zone serials to the timestamp at modification. Now that Puppet is my new religion, I want to set serial timestamps when building zone files from exported resources. A somewhat trivialized example may look like this: file { "/tmp/dafile": content = inline_template("<%= Time.now.to_i %>"), } The problem with this approach is that content will be different all the time, which will (ultimately) provoke rebuilding of zone files on each puppet config poll. Is there some way I can insert a timestamp without it being included in the data that is compared against previous state?

  Read the article

• What makes an Apple hard drive special?

  - by Michael Shnitzer

  The Mac Pro has a specific hard drive for sale in the Apple Store for $549.00. The drive has the following specs: Serial ATA 3GB per second 7200 RPM Amazon has a hard drive with the same specs for $169.99. The only difference I can tell is that the Apple hard drive label says it has "Apple HDD Firmware". What exactly is the benefit of this firmware and is there something I am missing that make up for the price difference in these two drives? Update: My initial comparison between the two drive was unfair. Apparently 2TB drives that are 3 GB/S and 7200 RPM are quiet a bit more than $169.99. Dell has a 2 TB SATA Caviar Black from Western Digital that is $319.99, which is closer to Apple's price.

  Read the article

• APC UPS-5000 Power off remote servers

  - by Vishal

  Hi there, I have a UPS connected via the serial port to a server using PowerChute Business Edition. If a power outage occurs I would like this server to start shutting down all other servers within the network. Is there dedicated software to do this? I was thinking of creating a command file which runs a .bat file to run shut down commands to each server (using PSExec). I can set PowerChute to run this command file when a power failure occurs. Is there not anything APC provide which has this functionality and is more efficient than writing a .bat file to do this? Thanks,

  Read the article

• Cloning Fresh Windows 7 with external HDD, DVD or CDs?

  - by hhh

  I want to create Windows installation disk (not necessarily CD) from my Windows 7 Pro laptop, not sure what it actually means here. The material is about 50-60GB, requiring about 12 pcs of 5GB disk (not going to happen, too much work to use them later). I have the Windows serial on the laptop bottom and this is so-called firm -laptop (no idea what it actually mean, better warranty and some instant support thing apparently). Now how to do the clone with external material such as DVDs? how can I create mock-windows-installation medium or some real windows-installation medium? I am now not sure whether Windows offers W7 -installations medium online, well my W -peer mentioned some MSDAA -something. Perhaps related Cloning Fresh Windows 7 -fsed HDD to Linux Server because having no external HDD or disks for the Backup

  Read the article

• Using a certificate in Thunderbird

  - by harper

  I have my certifcate issued by "TC Trustcenter" in a CER file. Thunderbird 3.0 needs it as a PFX files. So I installed the CER certificate with the Internet options in the Control Panel. Thereafter I exported the certificate including the "private key" and "all certificates in the certification path" to a PFX file. After importing this certificate with Thunderbird I still cannot decrypt the mail sent to the mail address of the certificate. What else must I do to use the private key? The certificate is valid since I decrypted the mail already on another computer using Outlook. I verified the certificate serial number to ensure that I use the same certificate.

  Read the article

• 2 identical PCs - can I swap a single hard drive between and expect Windows 7/XP to work?

  - by rgvcorley

  I currently work in 2 different locations, traveling between the 2 every few weeks or so. I currently have screens, kb, mouse etc... in both locations, so I just pick up my tower case when I want to move to the other location. However to make moving easier I was thinking of buying 2 tower cases with hot swappable drive bays on the front and installing identical hardware in each one. This would allow me to pull the drives out and just take them with me and plug them into the PC at the other location. Would windows 7 complain? I'm not fussed about buying licenses for both PCs, but would I have any problems with drivers due to the different serial numbers of the components?

  Read the article

• Cannot to change my root password on Xenserver

  - by Michlaou

  I try to change my root password on my Xenserver 6.0. I follow these steps: enter boot: menu.c32 selecet xe-serial and press tab add "single" before the 2nd triple hyphens and i press enter. I have that: mboot.c32 /boot/xen.gz com1=115200,8n1 console=com1, vga mem=1024G dom0_max_vcpus4 dom0_mem=752M lowmem_emergency_pool=1M crashkernel=64M@32M single --- /boot/vmlinuz-2.6-xen root=LABEL=root-rodraxar ro console=tty0 xencons=hvc console=hvc0 --- /boot/initrd-2.6-xen.img I have commande on the screen and it's stop at: ext3-fs: monted filesystem with ordered data mode. Can you help me?

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >