target exists - Page 40

Ubuntu cannot access internet, LAN is fine

- by Kevin Southworth

I have an Ubuntu 8.04 LTS server that is directly connected to our Comcast Business Gateway modem and I have configured it with 1 of our 5 allotted Static IPs. My other machines on our LAN can connect to this server (via ssh, web, ping, etc.) but I cannot access this server from outside our network, and this machine cannot get out to the internet either (ping google.com fails with unknown host). Here is my /etc/networking/interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.162.54.19 netmask 255.255.255.248 broadcast 173.162.54.23 gateway 173.162.54.22 and my /etc/resolv.conf: nameserver 68.87.77.130 nameserver 68.87.72.130 output from sudo route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 173.162.54.16 0.0.0.0 255.255.255.248 U 0 0 0 eth0 0.0.0.0 173.162.54.22 0.0.0.0 UG 100 0 0 eth0 I have a Windows 2008 machine with an almost identical Static IP, static DNS setup and it works correctly, can access it within the LAN and also from public internet, the Windows machine and the Ubuntu machine are both directly connected to the Comcast Business Gateway. I have tried rebooting Ubuntu, rebooting my Comcast modem, but nothing seems to make it work. I'm an Ubuntu noob, is there some other config I need to apply to make this work? UPDATE: Yes I am able to ping my default gateway 173.162.54.22 output of iptables --list -n: Chain INPUT (policy DROP) target prot opt source destination ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-input all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination ufw-before-forward all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-forward all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ufw-before-output all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-output all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-forward (1 references) target prot opt source destination LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK FORWARD]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-input (1 references) target prot opt source destination RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:137 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:138 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:139 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:67 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68 LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK INPUT]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-forward (1 references) target prot opt source destination ufw-user-forward all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED DROP all -- 0.0.0.0/0 0.0.0.0/0 ctstate INVALID ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:67 dpt:68 ufw-not-local all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 224.0.0.0/4 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 224.0.0.0/4 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-output (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ufw-user-output all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-not-local (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type MULTICAST RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type BROADCAST LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK NOT-TO-ME]: ' DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-forward (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:22 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0

Read the article

Custom Gesture in cocos2d

- by Lewis

I've found a little tutorial that would be useful for my game: http://blog.mellenthin.de/archives/2012/02/13/an-one-finger-rotation-gesture-recognizer/ But I can't work out how to convert that gesture to work with cocos2d, I have found examples of pre made gestures in cocos2d, but no custom ones, is it possible? EDIT STILL HAVING PROBLEMS WITH THIS: I've added the code from Sentinel below (from SO), the Gesture and RotateGesture have both been added to my solution and are compiling. Although In the rotation class now I only see selectors, how do I set those up? As the custom gesture found in that project above looks like: header file for custom gesture: #import <Foundation/Foundation.h> #import <UIKit/UIGestureRecognizerSubclass.h> @protocol OneFingerRotationGestureRecognizerDelegate <NSObject> @optional - (void) rotation: (CGFloat) angle; - (void) finalAngle: (CGFloat) angle; @end @interface OneFingerRotationGestureRecognizer : UIGestureRecognizer { CGPoint midPoint; CGFloat innerRadius; CGFloat outerRadius; CGFloat cumulatedAngle; id <OneFingerRotationGestureRecognizerDelegate> target; } - (id) initWithMidPoint: (CGPoint) midPoint innerRadius: (CGFloat) innerRadius outerRadius: (CGFloat) outerRadius target: (id) target; - (void)reset; - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event; - (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event; - (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event; - (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event; @end .m for custom gesture file: #include <math.h> #import "OneFingerRotationGestureRecognizer.h" @implementation OneFingerRotationGestureRecognizer // private helper functions CGFloat distanceBetweenPoints(CGPoint point1, CGPoint point2); CGFloat angleBetweenLinesInDegrees(CGPoint beginLineA, CGPoint endLineA, CGPoint beginLineB, CGPoint endLineB); - (id) initWithMidPoint: (CGPoint) _midPoint innerRadius: (CGFloat) _innerRadius outerRadius: (CGFloat) _outerRadius target: (id <OneFingerRotationGestureRecognizerDelegate>) _target { if ((self = [super initWithTarget: _target action: nil])) { midPoint = _midPoint; innerRadius = _innerRadius; outerRadius = _outerRadius; target = _target; } return self; } /** Calculates the distance between point1 and point 2. */ CGFloat distanceBetweenPoints(CGPoint point1, CGPoint point2) { CGFloat dx = point1.x - point2.x; CGFloat dy = point1.y - point2.y; return sqrt(dx*dx + dy*dy); } CGFloat angleBetweenLinesInDegrees(CGPoint beginLineA, CGPoint endLineA, CGPoint beginLineB, CGPoint endLineB) { CGFloat a = endLineA.x - beginLineA.x; CGFloat b = endLineA.y - beginLineA.y; CGFloat c = endLineB.x - beginLineB.x; CGFloat d = endLineB.y - beginLineB.y; CGFloat atanA = atan2(a, b); CGFloat atanB = atan2(c, d); // convert radiants to degrees return (atanA - atanB) * 180 / M_PI; } #pragma mark - UIGestureRecognizer implementation - (void)reset { [super reset]; cumulatedAngle = 0; } - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event { [super touchesBegan:touches withEvent:event]; if ([touches count] != 1) { self.state = UIGestureRecognizerStateFailed; return; } } - (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event { [super touchesMoved:touches withEvent:event]; if (self.state == UIGestureRecognizerStateFailed) return; CGPoint nowPoint = [[touches anyObject] locationInView: self.view]; CGPoint prevPoint = [[touches anyObject] previousLocationInView: self.view]; // make sure the new point is within the area CGFloat distance = distanceBetweenPoints(midPoint, nowPoint); if ( innerRadius <= distance && distance <= outerRadius) { // calculate rotation angle between two points CGFloat angle = angleBetweenLinesInDegrees(midPoint, prevPoint, midPoint, nowPoint); // fix value, if the 12 o'clock position is between prevPoint and nowPoint if (angle > 180) { angle -= 360; } else if (angle < -180) { angle += 360; } // sum up single steps cumulatedAngle += angle; // call delegate if ([target respondsToSelector: @selector(rotation:)]) { [target rotation:angle]; } } else { // finger moved outside the area self.state = UIGestureRecognizerStateFailed; } } - (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event { [super touchesEnded:touches withEvent:event]; if (self.state == UIGestureRecognizerStatePossible) { self.state = UIGestureRecognizerStateRecognized; if ([target respondsToSelector: @selector(finalAngle:)]) { [target finalAngle:cumulatedAngle]; } } else { self.state = UIGestureRecognizerStateFailed; } cumulatedAngle = 0; } - (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event { [super touchesCancelled:touches withEvent:event]; self.state = UIGestureRecognizerStateFailed; cumulatedAngle = 0; } @end Then its initialised like this: // calculate center and radius of the control CGPoint midPoint = CGPointMake(image.frame.origin.x + image.frame.size.width / 2, image.frame.origin.y + image.frame.size.height / 2); CGFloat outRadius = image.frame.size.width / 2; // outRadius / 3 is arbitrary, just choose something >> 0 to avoid strange // effects when touching the control near of it's center gestureRecognizer = [[OneFingerRotationGestureRecognizer alloc] initWithMidPoint: midPoint innerRadius: outRadius / 3 outerRadius: outRadius target: self]; [self.view addGestureRecognizer: gestureRecognizer]; The selector below is also in the same file where the initialisation of the gestureRecogonizer: - (void) rotation: (CGFloat) angle { // calculate rotation angle imageAngle += angle; if (imageAngle > 360) imageAngle -= 360; else if (imageAngle < -360) imageAngle += 360; // rotate image and update text field image.transform = CGAffineTransformMakeRotation(imageAngle * M_PI / 180); [self updateTextDisplay]; } I can't seem to get this working in the RotateGesture class can anyone help me please I've been stuck on this for days now. SECOND EDIT: Here is the users code from SO that was suggested to me: Here is projec on GitHub: SFGestureRecognizers It uses builded in iOS UIGestureRecognizer, and don't needs to be integrated into cocos2d sources. Using it, You can make any gestures, just like you could, if you whould work with UIGestureRecognizer. For example: I made a base class Gesture, and subclassed it for any new gesture: //Gesture.h @interface Gesture : NSObject <UIGestureRecognizerDelegate> { UIGestureRecognizer *gestureRecognizer; id delegate; SEL preSolveSelector; SEL possibleSelector; SEL beganSelector; SEL changedSelector; SEL endedSelector; SEL cancelledSelector; SEL failedSelector; BOOL preSolveAvailable; CCNode *owner; } - (id)init; - (void)addGestureRecognizerToNode:(CCNode*)node; - (void)removeGestureRecognizerFromNode:(CCNode*)node; -(void)recognizer:(UIGestureRecognizer*)recognizer; @end //Gesture.m #import "Gesture.h" @implementation Gesture - (id)init { if (!(self = [super init])) return self; preSolveAvailable = YES; return self; } - (BOOL)gestureRecognizer:(UIGestureRecognizer *)gestureRecognizer shouldRecognizeSimultaneouslyWithGestureRecognizer:(UIGestureRecognizer *)otherGestureRecognizer { return YES; } - (BOOL)gestureRecognizer:(UIGestureRecognizer *)recognizer shouldReceiveTouch:(UITouch *)touch { //! For swipe gesture recognizer we want it to be executed only if it occurs on the main layer, not any of the subnodes ( main layer is higher in hierarchy than children so it will be receiving touch by default ) if ([recognizer class] == [UISwipeGestureRecognizer class]) { CGPoint pt = [touch locationInView:touch.view]; pt = [[CCDirector sharedDirector] convertToGL:pt]; for (CCNode *child in owner.children) { if ([child isNodeInTreeTouched:pt]) { return NO; } } } return YES; } - (void)addGestureRecognizerToNode:(CCNode*)node { [node addGestureRecognizer:gestureRecognizer]; owner = node; } - (void)removeGestureRecognizerFromNode:(CCNode*)node { [node removeGestureRecognizer:gestureRecognizer]; } #pragma mark - Private methods -(void)recognizer:(UIGestureRecognizer*)recognizer { CCNode *node = recognizer.node; if (preSolveSelector && preSolveAvailable) { preSolveAvailable = NO; [delegate performSelector:preSolveSelector withObject:recognizer withObject:node]; } UIGestureRecognizerState state = [recognizer state]; if (state == UIGestureRecognizerStatePossible && possibleSelector) { [delegate performSelector:possibleSelector withObject:recognizer withObject:node]; } else if (state == UIGestureRecognizerStateBegan && beganSelector) [delegate performSelector:beganSelector withObject:recognizer withObject:node]; else if (state == UIGestureRecognizerStateChanged && changedSelector) [delegate performSelector:changedSelector withObject:recognizer withObject:node]; else if (state == UIGestureRecognizerStateEnded && endedSelector) { preSolveAvailable = YES; [delegate performSelector:endedSelector withObject:recognizer withObject:node]; } else if (state == UIGestureRecognizerStateCancelled && cancelledSelector) { preSolveAvailable = YES; [delegate performSelector:cancelledSelector withObject:recognizer withObject:node]; } else if (state == UIGestureRecognizerStateFailed && failedSelector) { preSolveAvailable = YES; [delegate performSelector:failedSelector withObject:recognizer withObject:node]; } } @end Subclass example: //RotateGesture.h #import "Gesture.h" @interface RotateGesture : Gesture - (id)initWithTarget:(id)target preSolveSelector:(SEL)preSolve possibleSelector:(SEL)possible beganSelector:(SEL)began changedSelector:(SEL)changed endedSelector:(SEL)ended cancelledSelector:(SEL)cancelled failedSelector:(SEL)failed; @end //RotateGesture.m #import "RotateGesture.h" @implementation RotateGesture - (id)initWithTarget:(id)target preSolveSelector:(SEL)preSolve possibleSelector:(SEL)possible beganSelector:(SEL)began changedSelector:(SEL)changed endedSelector:(SEL)ended cancelledSelector:(SEL)cancelled failedSelector:(SEL)failed { if (!(self = [super init])) return self; preSolveSelector = preSolve; delegate = target; possibleSelector = possible; beganSelector = began; changedSelector = changed; endedSelector = ended; cancelledSelector = cancelled; failedSelector = failed; gestureRecognizer = [[UIRotationGestureRecognizer alloc] initWithTarget:self action:@selector(recognizer:)]; gestureRecognizer.delegate = self; return self; } @end Use example: - (void)addRotateGesture { RotateGesture *rotateRecognizer = [[RotateGesture alloc] initWithTarget:self preSolveSelector:@selector(rotateGesturePreSolveWithRecognizer:node:) possibleSelector:nil beganSelector:@selector(rotateGestureStateBeganWithRecognizer:node:) changedSelector:@selector(rotateGestureStateChangedWithRecognizer:node:) endedSelector:@selector(rotateGestureStateEndedWithRecognizer:node:) cancelledSelector:@selector(rotateGestureStateCancelledWithRecognizer:node:) failedSelector:@selector(rotateGestureStateFailedWithRecognizer:node:)]; [rotateRecognizer addGestureRecognizerToNode:movableAreaSprite]; } I dont understand how to implement the custom gesture code at the start of this post into the rotateGesture class which is a subclass of the gesture class written by the SO user. Any ideas please? When I get 6 more rep I'll add a bounty to this.

Read the article

What's the use of Ant's extension-point if/unless attributes?

- by Robert Menteer

When you define an extension-point in an Ant build file you can have it conditional by using the if or unless attribute. On a target the if/unless prevent it's tasks from being run. But an extension-point doesn't have any tasks to conditionally run, so what does the condition do? My thought (which proved to be incorrect in Ant 1.8.0) is it would prevent any tasks that extend the extension-point from being run. Here is an example build script showing the problem: <project name = "ext-test" default = "main"> <property name = "do.it" value = "false" /> <extension-point name = "init"/> <extension-point name = "doit" depends = "init" if = "${do.it}" /> <target name = "extend-init" extensionOf = "init"> <echo message = "Doing extend-init." /> </target> <target name = "extend-doit" extensionOf = "doit"> <echo message = "Do It! (${do.it})" /> </target> <target name = "main" depends = "doit"> <echo message = "Doing main." /> </target> </project> Using the command: ant -v Relults in: Apache Ant version 1.8.0 compiled on February 1 2010 Trying the default build file: build.xml Buildfile: /Users/bob/build.xml Detected Java version: 1.6 in: /System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home Detected OS: Mac OS X parsing buildfile /Users/bob/build.xml with URI = file:/Users/bob/build.xml Project base dir set to: /Users/bob parsing buildfile jar:file:/Users/bob/Documents/Development/3P-Tools/apache-ant-1.8.0/lib/ant.jar!/org/apache/tools/ant/antlib.xml with URI = jar:file:/Users/bob/Documents/Development/3P-Tools/apache-ant-1.8.0/lib/ant.jar!/org/apache/tools/ant/antlib.xml from a zip file Build sequence for target(s) `main' is [extend-init, init, extend-doit, doit, main] Complete build sequence is [extend-init, init, extend-doit, doit, main, ] extend-init: [echo] Doing extend-init. init: extend-doit: [echo] Do It! (false) doit: Skipped because property 'false' not set. main: [echo] Doing main. BUILD SUCCESSFUL Total time: 0 seconds You will notice the target extend-doit is executed but the extention-point itself is skipped. Since an extention-point doesn't have any tasks exactly what has been skipped? Any targets that depend on the extention-point still get executed since a skipped target is a successful target. What is the value of the if/unless attributes on an extention-point?

Read the article

Calling a function that resides in the main page from a plugin?

- by Justin Lee

I want to call a function from within plugin, but the function is on the main page and not the plugin's .js file. EDIT I have jQuery parsing a very large XML file and building, subsequently, a large list (1.1 MB HTML file when dynamic content is copied, pasted, then saved) that has expand/collapse functionality through a plugin. The overall performance on IE is super slow and doggy, assuming since the page/DOM is so big. I am currently trying to save the collapsed content in the event.data when it is collapsed and remove it from the DOM, then bring it back when it is told to expand... the issue that I am having is that when I bring the content back, obviously the "click" and "hover" events are gone. I'm trying to re-assign them, currently doing so inside the plugin after the plugin expands the content. The issue then though is that is says the function that I declare within the .click() is not defined. Also the hover event doesn't seem to be re-assigning either.... if ($(event.data.trigger).attr('class').indexOf('collapsed') != -1 ) { // if expanding // console.log(event.data.targetContent); $(event.data.trigger).after(event.data.targetContent); $(event.data.target).hide(); /* This Line --->*/ $(event.data.target + 'a.addButton').click(addResourceToList); $(event.data.target + 'li.resource') .hover( function() { if (!($(this).attr("disabled"))) { $(this).addClass("over"); $(this).find("a").css({'display':'block'}); } }, function () { if (!($(this).attr("disabled"))) { $(this).removeClass("over"); $(this).children("a").css({'display':'none'}); } } ); $(event.data.target).css({ "height": "0px", "padding-top": "0px", "padding-bottom": "0px", "margin-top": "0px", "margin-bottom": "0px"}); $(event.data.target).show(); $(event.data.target).animate({ height: event.data.heightVal + "px", paddingTop: event.data.topPaddingVal + "px", paddingBottom: event.data.bottomPaddingVal + "px", marginTop: event.data.topMarginVal + "px", marginBottom: event.data.bottomMarginVal + "px"}, "normal");//, function(){$(this).hide();}); $(event.data.trigger).removeClass("collapsed"); $.cookies.set('jcollapserSub_' + event.data.target, 'expanded', {hoursToLive: 24 * 365}); } else if ($(event.data.trigger).attr('class').indexOf('collapsed') == -1 ) { // if collapsing $(event.data.target).animate({ height: "0px", paddingTop: "0px", paddingBottom: "0px", marginTop: "0px", marginBottom: "0px"}, "normal", function(){$(this).hide();$(this).remove();}); $(event.data.trigger).addClass("collapsed"); $.cookies.set('jcollapserSub_' + event.data.target, 'collapsed', {hoursToLive: 24 * 365}); } EDIT So, having new eyes truly makes a difference. As I was reviewing the code in this post this morning after being away over the weekend, I found where I had err'd. This: $(event.data.target + 'a.addButton').click(addResourceToList); Should be this (notice the space before a.addbutton): $(event.data.target + ' a.addButton').click(addResourceToList); Same issue with the "li.resource". So it was never pointing to the right elements... Thank you, Rene, for your help!!

Read the article

xna orbit camera troubles

- by user17753

I have a Model named cube to which I load in LoadContent(): cube = Content.Load<Model>("untitled");. In the Draw Method I call DrawModel: private void DrawModel(Model m, Matrix world) { foreach (ModelMesh mesh in m.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.EnableDefaultLighting(); effect.View = camera.View; effect.Projection = camera.Projection; effect.World = world; } mesh.Draw(); } } camera is of the Camera type, a class I've setup. Right now it is instantiated in the initialization section with the graphics aspect ratio and the translation (world) vector of the model, and the Draw loop calls the camera.UpdateCamera(); before drawing the models. class Camera { #region Fields private Matrix view; // View Matrix for Camera private Matrix projection; // Projection Matrix for Camera private Vector3 position; // Position of Camera private Vector3 target; // Point camera is "aimed" at private float aspectRatio; //Aspect Ratio for projection private float speed; //Speed of camera private Vector3 camup = Vector3.Up; #endregion #region Accessors /// <summary> /// View Matrix of the Camera -- Read Only /// </summary> public Matrix View { get { return view; } } /// <summary> /// Projection Matrix of the Camera -- Read Only /// </summary> public Matrix Projection { get { return projection; } } #endregion /// <summary> /// Creates a new Camera. /// </summary> /// <param name="AspectRatio">Aspect Ratio to use for the projection.</param> /// <param name="Position">Target coord to aim camera at.</param> public Camera(float AspectRatio, Vector3 Target) { target = Target; aspectRatio = AspectRatio; ResetCamera(); } private void Rotate(Vector3 Axis, float Amount) { position = Vector3.Transform(position - target, Matrix.CreateFromAxisAngle(Axis, Amount)) + target; } /// <summary> /// Resets Default Values of the Camera /// </summary> private void ResetCamera() { speed = 0.05f; position = target + new Vector3(0f, 20f, 20f); projection = Matrix.CreatePerspectiveFieldOfView(MathHelper.PiOver4, aspectRatio, 0.5f, 100f); CalculateViewMatrix(); } /// <summary> /// Updates the Camera. Should be first thing done in Draw loop /// </summary> public void UpdateCamera() { Rotate(Vector3.Right, speed); CalculateViewMatrix(); } /// <summary> /// Calculates the View Matrix for the camera /// </summary> private void CalculateViewMatrix() { view = Matrix.CreateLookAt(position,target, camup); } I'm trying to create the camera so that it can orbit the center of the model. For a test I am calling Rotate(Vector3.Right, speed); but it rotates almost right but gets to a point where it "flips." If I rotate along a different axis Rotate(Vector3.Up, speed); everything seems OK in that direction. So I guess, can someone tell me what I'm not accounting for in the above code I wrote? Or point me to an example of an orbiting camera that can be fixed on an arbitrary point?

Read the article

VRF Internet Gateway Multiple External IP's 1 Internal IP to AWS

- by user223903

Trying to setup VRF for the first time and its not working for me even though I keep reading everything online. IP's are different to real life. I have an Internet connection which I can ping to my router in the current setup below 195.45.73.22 I have a block of ip addresses 195.45.121.0/27 I want to setup multiple VPN's to AWS so need to have multiple external ip's thus the block of IP addresses. I have setup the 2nd and 3rd IP address but can not ping them from external. Any help would be grateful. Bryan ip source-route ! ip vrf Internet rd 1:1 route-target export 1:1 route-target import 1:1 ip vrf AWSSydney1 rd 2:2 route-target export 2:2 route-target import 2:2 route-target import 1:1 ip vrf AWSSydney2 rd 3:3 route-target export 3:3 route-target import 3:3 route-target import 1:1 ip cef no ip domain lookup no ipv6 cef multilink bundle-name authenticated interface FastEthernet0/0 description Vocus Internet no ip address speed 100 full-duplex interface FastEthernet0/0.1 encapsulation dot1Q 1 native ip address 195.45.73.22 255.255.255.252 interface FastEthernet0/0.2 encapsulation dot1Q 2 ip vrf forwarding AWSSydney1 ip address 195.45.121.1 255.255.255.224 interface FastEthernet0/0.3 encapsulation dot1Q 3 ip vrf forwarding AWSSydney2 ip address 195.45.121.2 255.255.255.224 interface FastEthernet0/1 description LAN_SIDE ip address 10.0.0.5 255.255.255.0 speed 100 full-duplex no mop enabled ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 195.45.73.21 ip route vrf Internet 0.0.0.0 0.0.0.0 195.45.73.21

Read the article

Routing in Php and decorator pattern

- by Joey Salac Hipolito

I do not know if I am using the term 'routing' correctly, but here is the situation: I created an .htaccess file to 'process' (dunno if my term is right) the url of my application, like this : RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.+)$ index.php?url=$1 [QSA,L] Now I have this : http://appname/controller/method/parameter http://appname/$url[0]/$url[1]/$url[2] What I did is: setup a default controller, in case it is not specified in the url setup a Controller wrapper I did it like this $target = new $url[0]() $controller = new Controller($target) The problem with that one is that I can't use the methods in the object I passed in the constructor of the Controller: I resolved it like this : class Controller { protected $target; protected $view; public function __construct($target, $view) { $this->target = $target; $this->view = $view; } public function __call($method, $arguments) { if (method_exists($this->target, $method)) { return call_user_func_array(array($this->target, $method), $arguments); } } } This is working fine, the problem occurs in the index where I did the routing, here it is if(isset($url[2])){ if(method_exists($controller, $url[1])){ $controller->$url[1]($url[2]) } } else { if(method_exists($controller, $url[1])){ $controller->$url[1]() } } where $controller = new Controller($target) The problem is that the method doesn't exist, although I can use it directly without checking if method exist, how can I resolve this?

Read the article

C# 4.0 'dynamic' doesn't set ref/out arguments

- by Buu Nguyen

I'm experimenting with DynamicObject. One of the things I try to do is setting the values of ref/out arguments, as shown in the code below. However, I am not able to have the values of i and j in Main() set properly (even though they are set correctly in TryInvokeMember()). Does anyone know how to call a DynamicObject object with ref/out arguments and be able to retrieve the values set inside the method? class Program { static void Main(string[] args) { dynamic proxy = new Proxy(new Target()); int i = 10; int j = 20; proxy.Wrap(ref i, ref j); Console.WriteLine(i + ":" + j); // Print "10:20" while expect "20:10" } } class Proxy : DynamicObject { private readonly Target target; public Proxy(Target target) { this.target = target; } public override bool TryInvokeMember(InvokeMemberBinder binder, object[] args, out object result) { int i = (int) args[0]; int j = (int) args[1]; target.Swap(ref i, ref j); args[0] = i; args[1] = j; result = null; return true; } } class Target { public void Swap(ref int i, ref int j) { int tmp = i; i = j; j = tmp; } }

Read the article

obj-c classes and sub classes (Cocos2d) conversion

- by Lewis

Hi I'm using this version of cocos2d: https://github.com/krzysztofzablocki/CCNode-SFGestureRecognizers Which supports the UIGestureRecognizer within a CCLayer in a cocos2d scene like so: @interface HelloWorldLayer : CCLayer <UIGestureRecognizerDelegate> { } Now I want to make this custom gesture work within the scene, attaching it to a sprite in cocos2d: #import <Foundation/Foundation.h> #import <UIKit/UIGestureRecognizerSubclass.h> @protocol OneFingerRotationGestureRecognizerDelegate <NSObject> @optional - (void) rotation: (CGFloat) angle; - (void) finalAngle: (CGFloat) angle; @end @interface OneFingerRotationGestureRecognizer : UIGestureRecognizer { CGPoint midPoint; CGFloat innerRadius; CGFloat outerRadius; CGFloat cumulatedAngle; id <OneFingerRotationGestureRecognizerDelegate> target; } - (id) initWithMidPoint: (CGPoint) midPoint innerRadius: (CGFloat) innerRadius outerRadius: (CGFloat) outerRadius target: (id) target; - (void)reset; - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event; - (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event; - (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event; - (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event; @end #include <math.h> #import "OneFingerRotationGestureRecognizer.h" @implementation OneFingerRotationGestureRecognizer // private helper functions CGFloat distanceBetweenPoints(CGPoint point1, CGPoint point2); CGFloat angleBetweenLinesInDegrees(CGPoint beginLineA, CGPoint endLineA, CGPoint beginLineB, CGPoint endLineB); - (id) initWithMidPoint: (CGPoint) _midPoint innerRadius: (CGFloat) _innerRadius outerRadius: (CGFloat) _outerRadius target: (id <OneFingerRotationGestureRecognizerDelegate>) _target { if ((self = [super initWithTarget: _target action: nil])) { midPoint = _midPoint; innerRadius = _innerRadius; outerRadius = _outerRadius; target = _target; } return self; } /** Calculates the distance between point1 and point 2. */ CGFloat distanceBetweenPoints(CGPoint point1, CGPoint point2) { CGFloat dx = point1.x - point2.x; CGFloat dy = point1.y - point2.y; return sqrt(dx*dx + dy*dy); } CGFloat angleBetweenLinesInDegrees(CGPoint beginLineA, CGPoint endLineA, CGPoint beginLineB, CGPoint endLineB) { CGFloat a = endLineA.x - beginLineA.x; CGFloat b = endLineA.y - beginLineA.y; CGFloat c = endLineB.x - beginLineB.x; CGFloat d = endLineB.y - beginLineB.y; CGFloat atanA = atan2(a, b); CGFloat atanB = atan2(c, d); // convert radiants to degrees return (atanA - atanB) * 180 / M_PI; } #pragma mark - UIGestureRecognizer implementation - (void)reset { [super reset]; cumulatedAngle = 0; } - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event { [super touchesBegan:touches withEvent:event]; if ([touches count] != 1) { self.state = UIGestureRecognizerStateFailed; return; } } - (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event { [super touchesMoved:touches withEvent:event]; if (self.state == UIGestureRecognizerStateFailed) return; CGPoint nowPoint = [[touches anyObject] locationInView: self.view]; CGPoint prevPoint = [[touches anyObject] previousLocationInView: self.view]; // make sure the new point is within the area CGFloat distance = distanceBetweenPoints(midPoint, nowPoint); if ( innerRadius <= distance && distance <= outerRadius) { // calculate rotation angle between two points CGFloat angle = angleBetweenLinesInDegrees(midPoint, prevPoint, midPoint, nowPoint); // fix value, if the 12 o'clock position is between prevPoint and nowPoint if (angle > 180) { angle -= 360; } else if (angle < -180) { angle += 360; } // sum up single steps cumulatedAngle += angle; // call delegate if ([target respondsToSelector: @selector(rotation:)]) { [target rotation:angle]; } } else { // finger moved outside the area self.state = UIGestureRecognizerStateFailed; } } - (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event { [super touchesEnded:touches withEvent:event]; if (self.state == UIGestureRecognizerStatePossible) { self.state = UIGestureRecognizerStateRecognized; if ([target respondsToSelector: @selector(finalAngle:)]) { [target finalAngle:cumulatedAngle]; } } else { self.state = UIGestureRecognizerStateFailed; } cumulatedAngle = 0; } - (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event { [super touchesCancelled:touches withEvent:event]; self.state = UIGestureRecognizerStateFailed; cumulatedAngle = 0; } @end Header file for view controller: #import "OneFingerRotationGestureRecognizer.h" @interface OneFingerRotationGestureViewController : UIViewController <OneFingerRotationGestureRecognizerDelegate> @property (nonatomic, strong) IBOutlet UIImageView *image; @property (nonatomic, strong) IBOutlet UITextField *textDisplay; @end then this is in the .m file: gestureRecognizer = [[OneFingerRotationGestureRecognizer alloc] initWithMidPoint: midPoint innerRadius: outRadius / 3 outerRadius: outRadius target: self]; [self.view addGestureRecognizer: gestureRecognizer]; Now my question is, is it possible to add this custom gesture into the cocos2d project found on that github, and if so, what do I need to change in the OneFingerRotationGestureRecognizerDelegate to get it to work within cocos2d. Because at the minute it is setup in a standard iOS project and not a cocos2d project and I do not know enough about UIViews and classing/ sub classing in obj-c to get this to work. Also it seems to inherit from a UIView where cocos2d uses CCLayer. Kind regards, Lewis. I also realise I may have not included enough code from the custom gesture project for readers to interpret it fully, so the full project can be found here: https://github.com/melle/OneFingerRotationGestureDemo

Read the article

Is it normal to these Xcode prompts/errors when you deploy to IOS Simulator from Unity?

- by Greg

Just trying out the IOS build process.... Is it normal to see: Q1 - "upgrade to latest project format - project currently in Xcode 3.1 format, this will upgrade to 3.2" - just click OK and let Xcode do it's stuff? Q2 - same as Q1 but this time for the message "Remove obsolete build settings - will remove the build setting PREBINDING" Q3 - also when deploying to "Lastest IOS Simulator" you get the Simulator target produced, but also a non-simulator target which has lots of errors. So I assume you just ignore this target and not use it in Xcode correct? (i.e. just use the simulator target that is produced) Q4 - get a lot of warning after the simulator target is built? program works ok however.... Images For Q1 and Q2: For Q4: Settings used in Unity: Errors I see in XCode:

Read the article

write to depth buffer while using multiple render targets

- by DocSeuss

Presently my engine is set up to use deferred shading. My pixel shader output struct is as follows: struct GBuffer { float4 Depth : DEPTH0; //depth render target float4 Normal : COLOR0; //normal render target float4 Diffuse : COLOR1; //diffuse render target float4 Specular : COLOR2; //specular render target }; This works fine for flat surfaces, but I'm trying to implement relief mapping which requires me to manually write to the depth buffer to get correct silhouettes. MSDN suggests doing what I'm already doing to output to my depth render target - however, this has no impact on z culling. I think it might be because XNA uses a different depth buffer for every RenderTarget2D. How can I address these depth buffers from the pixel shader?

Read the article

Avoiding orbiting in pursuit steering behavior

- by bobobobo

I have a missile that does pursuit behavior to track (and try and impact) its (stationary) target. It works fine as long as you are not strafing when you launch the missile. If you are strafing, the missile tends to orbit its target. I fixed this by accelerating tangentially to the target first, killing the tangential component of the velocity first, then beelining for the target. So I accelerate in -vT until vT is nearly 0. Then accelerate in the direction of vN. While that works, I'm looking for a more elegant solution where the missile is able to impact the target without explicitly killing the tangential component first.

Read the article

Touching a CGRect

- by Coder404

In my cocos2d app I am trying to determine when a CCSprite is touched Here is what I have: -(BOOL)ccTouchBegan:(UITouch *)touch withEvent:(UIEvent *)event{ NSMutableArray *targetsToDelete = [[NSMutableArray alloc] init]; for (CCSprite *target in _targets) { CGRect targetRect = CGRectMake(target.position.x - (target.contentSize.width/2), target.position.y - (target.contentSize.height/2), 27, 40); CGPoint touchLocation = [self convertTouchToNodeSpace:touch]; if (CGRectContainsPoint(targetRect, touchLocation)) { NSLog(@"Moo cheese!"); } } return YES; } For some reason it does not work. Can someone help me?

Read the article

TFS Build Automation - Web Deployment Project error

- by gracejz

I'm trying to build a web deployment project using TFS automated build process. When I build the project directly in Visual Studio 2008, it works fine. But from TFS, I get the following error: "C:\Users\tfsservice\AppData\Local\Temp\TestProduct\TestSolution\BuildType\TFSBuild.proj" (EndToEndIteration target) (1) - "C:\Users\tfsservice\AppData\Local\Temp\TestProduct\TestSolution\BuildType\TFSBuild.proj" (CoreCompile target) (1:2) - "C:\Users\tfsservice\AppData\Local\Temp\TestProduct\TestSolution\BuildType\TFSBuild.proj" (CompileConfiguration target) (1:3) - "C:\Users\tfsservice\AppData\Local\Temp\TestProduct\TestSolution\BuildType\TFSBuild.proj" (CompileSolution target) (1:4) - "C:\Users\tfsservice\AppData\Local\Temp\TestProduct\TestSolution\Sources\TestSolution.sln" (default target) (6) - "C:\Users\tfsservice\AppData\Local\Temp\TestProduct\TestSolution\Sources\WebDeployment\WebDeployment.wdproj" (default target) (48) - (CreateVirtualDirectory target) - C:\Program Files\MSBuild\Microsoft\WebDeployment\v9.0\Microsoft.WebDeployment.targets(676,5): error : Some or all identity references could not be translated. I made sure that NETWORK SERVICE account has permission to access all the web folders. Any ideas?

Read the article

How do I implement a remove by index method for a singly linked list in Java?

- by Lars Flyger

Hi, I'm a student in a programming class, and I need some help with this code I've written. So far I've written an entire linked list class (seen below), yet for some reason the "removeByIndex" method won't work. I can't seem to figure out why, the logic seems sound to me. Is there some problem I don't know about? public class List<T> { //private sub-class Link private class Link { private T value; private Link next; //constructors of Link: public Link (T val) { this.value = val; this.next = null; } public Link (T val, Link next) { this.value = val; this.next = next; } @SuppressWarnings("unused") public T getValue() { return value; } } private static final Exception NoSuchElementException = null; private static final Exception IndexOutOfBoundsException = null; private Link chain = null; //constructors of List: public List() { this.chain = null; } //methods of List: /** * Preconditions: none * Postconditions: returns true if list is empty */ public boolean isEmpty() { return this.chain == null; } /** * Preconditions: none * Postconditions: A new Link is added via add-aux * @param element */ public void add(T element) { this.add_aux(element, this.chain); } /** * Preconditions: none * Postconditions: A new Link is added to the current chain * @param element * @param chain */ private void add_aux(T element, Link chain) { if (chain == null) { //if chain is null set chain to a new Link with a value of //element this.chain = new Link(element); } else if (chain.next != null) { //if chain.next is not null, go to next item in chain and //try //to add element add_aux(element, chain.next); } else { //if chain.next is null, set chain.next equal to a new Link //with value of element. chain.next = new Link(element); } } /** * Preconditions: none * Postconditions: returns the link at the defined index via nthlink_aux * @param index * @return */ private Link nthLink (int index) { return nthLink_aux(index, this.chain); } /** * Preconditions: none * Postconditions: returns the link at the defined index in the specified *chain * @param i * @param c * @return */ private Link nthLink_aux (int i, Link c) { if (i == 0) { return c; } else return nthLink_aux(i-1, c.next); } /** * Preconditions: the specified element is present in the list * Postconditions: the specified element is removed from the list * @param element * @throws Exception */ public void removeElement(T element) throws Exception { if (chain == null) { throw NoSuchElementException; } //while chain's next is not null and the value of chain.next is not //equal to element, //set chain equal to chain.next //use this iteration to go through the linked list. else while ((chain.next != null) && !(chain.next.value.equals(element))){ Link testlink = chain.next; if (testlink.next.value.equals(element)) { //if chain.next is equal to element, bypass the //element. chain.next.next = chain.next.next.next; } else if (testlink.next == null) { throw NoSuchElementException; } } } /** * Preconditions: none * Postsconditions: the Link at the specified index is removed * @param index * @throws Exception */ public void removeByIndex(int index) throws Exception { if (index == 0) { //if index is 0, set chain equal to chain.next chain = chain.next; } else if (index > 0) { Link target = nthLink(index); while (target != null) { if (target.next != null) { target = target.next; } //if target.next is null, set target to null else { target = null; } } return; } else throw IndexOutOfBoundsException; } /** * Preconditions: none * Postconditions: the specified link's value is printed * @param link */ public void printLink (Link link) { if(link != null) { System.out.println(link.value.toString()); } } /** * Preconditions: none * Postconditions: all of the links' values in the list are printed. */ public void print() { //copy chain to a new variable Link head = this.chain; //while head is not null while (!(head == null)) { //print the current link this.printLink(head); //set head equal to the next link head = head.next; } } /** * Preconditions: none * Postconditions: The chain is set to null */ public void clear() { this.chain = null; } /** * Preconditions: none * Postconditions: Places the defined link at the defined index of the list * @param index * @param val */ public void splice(int index, T val) { //create a new link with value equal to val Link spliced = new Link(val); if (index <= 0) { //copy chain Link copy = chain; //set chain equal to spliced chain = spliced; //set chain.next equal to copy chain.next = copy; } else if (index > 0) { //create a target link equal to the link before the index Link target = nthLink(index - 1); //set the target's next equal to a new link with a next //equal to the target's old next target.next = new Link(val, target.next); } } /** * Preconditions: none * Postconditions: Check to see if element is in the list, returns true * if it is and false if it isn't * @param element * @return */ public boolean Search(T element) { if (chain == null) { //return false if chain is null return false; } //while chain's next is not null and the value of chain.next is not //equal to element, //set chain equal to chain.next //use this iteration to go through the linked list. else while ((chain.next != null) && !(chain.next.value.equals(element))) { Link testlink = chain.next; if (testlink.next.value.equals(element)) { //if chain.next is equal to element, return true return true; } else if (testlink.next == null) { return false; } } return false; } /** * Preconditions: none * Postconditions: order of the links in the list is reversed. */ public void reverse() { //copy chain Link current = chain; //set chain equal to null chain = null; while (current != null) { Link save = current; current = current.next; save.next = chain; chain = save; } } }'

Read the article

Building a specific piece of Android platform?

- by Chrisc

Hi, I have been trying to build only the "/libcore" directory of the Android platform. When I try mmm libcore I end up with the following output: ============================================ PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=2.1-update1 TARGET_PRODUCT=generic TARGET_BUILD_VARIANT=eng TARGET_SIMULATOR=false TARGET_BUILD_TYPE=release TARGET_ARCH=arm HOST_ARCH=x86 HOST_OS=linux HOST_BUILD_TYPE=release BUILD_ID=ECLAIR ============================================ make: Entering directory `/home/chris/android/platform' target Prebuilt: (out/target/product/generic/system/etc/security/cacerts.bks) host Prebuilt: run-core-tests-on-ri (out/host/linux-x86/obj/EXECUTABLES/run-core-tests-on-ri_intermediates/run-core-tests-on-ri) target Prebuilt: run-core-tests (out/target/product/generic/obj/EXECUTABLES/run-core-tests_intermediates/run-core-tests) Copy: out/target/product/generic/system/etc/apns-conf.xml Copying: out/target/common/obj/JAVA_LIBRARIES/core_intermediates/classes-full-debug.jar Copying: out/target/common/obj/JAVA_LIBRARIES/core-tests_intermediates/classes-full-debug.jar /bin/bash: jar: command not found make: *** [out/host/common/core-tests.jar] Error 127 make: *** Deleting file `out/host/common/core-tests.jar' make: Leaving directory `/home/chris/android/platform' Does anyone have any suggestions on what Error 127 is, or another method I can go about building "libcore" without having to build the entire platform again? Thanks, Chris

Read the article

nested if: too many arguments?

- by FLX

For some reason this code creates problems: source="/foo/bar/" destination="/home/oni/" if [ -d $source ]; then echo "Source directory exists" if [ -d $destination ]; then echo "Destination directory exists" rsync -raz --delete --ignore-existing --ignore-times --size-only --stats --progress $source $destination chmod -R 0755 $destination else echo "Destination directory does not exists" fi else echo "Source directory does not exists" fi It errors out with: Source directory exists /usr/bin/copyfoo: line 7: [: too many arguments Destination directory does not exists I used nested if statements in bash before without a problem, what simple mistake am I overlooking? Thanks!

Read the article

whats the diference between train, validation and test set, in neural networks?

- by Daniel

Im using this library http://pastebin.com/raw.php?i=aMtVv4RZ to implement a learning agent. I have generated the train cases, but i dont know for sure what are the validation and test sets, the teacher says: 70% should be train cases, 10% will be test cases and the rest 20% should be validation cases. Thanks. edit i have this code, for training.. but i have no ideia when to stop training.. def train(self, train, validation, N=0.3, M=0.1): # N: learning rate # M: momentum factor accuracy = list() while(True): error = 0.0 for p in train: input, target = p self.update(input) error = error + self.backPropagate(target, N, M) print "validation" total = 0 for p in validation: input, target = p output = self.update(input) total += sum([abs(target - output) for target, output in zip(target, output)]) #calculates sum of absolute diference between target and output accuracy.append(total) print min(accuracy) print sum(accuracy[-5:])/5 #if i % 100 == 0: print 'error %-14f' % error if ? < ?: break

Read the article

code duplication in sql case statements

- by NS

Hi I'm trying to output something like the following but am finding that there is a lot of code duplication going on. | australian_has_itch | kiwi_has_itch | | yes | no | | no | n/a | | n/a | no | ... My query looks like this with two case statements that do the same thing but flip the country (my real query has 5 of these case statements): SELECT CASE WHEN NOT EXISTS ( SELECT person_id FROM people_with_skin WHERE people_with_skin.person_id = people.person_id AND people.country = "Australia" ) THEN 'N/A' WHEN EXISTS ( SELECT person_id FROM itch_none_to_report WHERE people.country = "Australia" AND person_id = people.person_id ) THEN 'None to report' WHEN EXISTS ( SELECT person_id FROM itchy_people WHERE people.country = "Australia" AND person_id = people.person_id ) THEN 'Yes' ELSE 'No' END australian_has_itch, CASE WHEN NOT EXISTS ( SELECT person_id FROM people_with_skin WHERE people_with_skin.person_id = people.person_id AND people.country = "NZ" ) THEN 'N/A' WHEN EXISTS ( SELECT person_id FROM itch_none_to_report WHERE people.country = "NZ" AND person_id = people.person_id ) THEN 'None to report' WHEN EXISTS ( SELECT person_id FROM itchy_people WHERE people.country = "NZ" AND person_id = people.person_id ) THEN 'Yes' ELSE 'No' END kiwi_has_itch, FROM people Is there a way for me to condense this somehow and not have so much code duplication? Thanks!

Read the article

How can I change my code in Excel 2003 to allow me to paste to multiple cells?

- by PikeCoAL

Ran in to a little problem. If I try to paste to multiple cells that are in the range in the code below, I get a run time error 13, type mismatch. The cells in the range may have data other than X but I only want the hyperlink to appear if the cell contains X. It works fine if I just type an X in the cell or if I paste to one cell at a time. I will have times when I want to paste other text to mutiple cells in this range. Thanks to Remnant for his help on the original code. This one last hurdle will put me in the clear. Thx. Private Sub Worksheet_Change(ByVal Target As Range) Dim rangeLimit As Range Set rangeLimit = Range ("B9:B37,C9:C37,D9:D37,E9:E37,F9:F37,G9:G37,H9:H37,I9:I37,J9:J37,K9:K37,L9:L37,M9:M37") If Not Intersect(rangeLimit, Target) Is Nothing Then If Target = "x" Or Target = "X" Then Target.Hyperlinks.Add Anchor:=Target, Address:="", SubAddress:="Exceptions!A1", TextToDisplay:=Target.Value End If End If End Sub

Read the article

How to print object data in javascript

- by rxzhang

I have the following object data: var response = { "response": { "numFound": 7945, "docs": [{ "description": "target", "url": "target", "id": "269653", "score": 6.9186745 }, { "description": "Target Kent", "url": "Target_Kent", "id": "37275", "score": 4.3241715 }] }, "highlighting": { "269653": { "description": ["<em>target</em>"] }, "37275": { "description": ["<em>Target</em> Kent"] } } }; I can use response.response.docs[0].description to print out "target". But I don't know how to print out "<em>target</em>". Thanks.

Read the article

JQuery not working in IE7/8

- by user1665283

I have been given the following code to implement: <script type="text/javascript"> $(document).ready(function(){ $('.hotspots a').bind('mouseover click', function() { $this = $(this); if($('.hotspot-target').data('hotspot')!=$this.attr('href')) { $('.hotspot-target').data('hotspot', $this.attr('href')); $('.hotspot-target').fadeOut(100, function() { $('.hotspot-target').css({backgroundImage: 'url('+$this.attr('href')+')'}); $('.hotspot-target .detail').hide(); $('.hotspot-target .detail.'+$this.attr('class')).show(); $('.hotspot-target').fadeIn(100); }); } return false; }) }); </script> It works fine in FF and Chrome with no errors in the console. I also can't see any errors in the IE debugger, though I'm not so used to how that works. Is there anything obviously wrong with the above code? It's placed at the end of the page

Read the article

Creating packages in code - Package Configurations

Continuing my theme of building various types of packages in code, this example shows how to building a package with package configurations. Incidentally it shows you how to add a variable, and a connection too. It covers the five most common configurations: Configuration File Indirect Configuration File SQL Server Indirect SQL Server Environment Variable For a general overview try the SQL Server Books Online Package Configurations topic. The sample uses a a simple helper function ApplyConfig to create or update a configuration, although in the example we will only ever create. The most useful knowledge is the configuration string (Configuration.ConfigurationString) that you need to set. Configuration Type Configuration String Description Configuration File The full path and file name of an XML configuration file. The file can contain one or more configuration and includes the target path and new value to set. Indirect Configuration File An environment variable the value of which contains full path and file name of an XML configuration file as per the Configuration File type described above. SQL Server A three part configuration string, with each part being quote delimited and separated by a semi-colon. -- The first part is the connection manager name. The connection tells you which server and database to look for the configuration table. -- The second part is the name of the configuration table. The table is of a standard format, use the Package Configuration Wizard to help create an example, or see the sample script files below. The table contains one or more rows or configuration items each with a target path and new value. -- The third and final part is the optional filter name. A configuration table can contain multiple configurations, and the filter is literal value that can be used to group items together and act as a filter clause when configurations are being read. If you do not need a filter, just leave the value empty. Indirect SQL Server An environment variable the value of which is the three part configuration string as per the SQL Server type described above. Environment Variable An environment variable the value of which is the value to set in the package. This is slightly different to the other examples as the configuration definition in the package also includes the target information. In our ApplyConfig function this is the only example that actually supplies a target value for the Configuration.PackagePath property. The path is an XPath style path for the target property, \Package.Variables[User::Variable].Properties[Value], the equivalent of which can be seen in the screenshot below, with the object being our variable called Variable, and the property to set is the Value property of that variable object. The configurations as seen when opening the generated package in BIDS: The sample code creates the package, adds a variable and connection manager, enables configurations, and then adds our example configurations. The package is then saved to disk, useful for checking the package and testing, before finally executing, just to prove it is valid. There are some external resources used here, namely some environment variables and a table, see below for more details. namespace Konesans.Dts.Samples { using System; using Microsoft.SqlServer.Dts.Runtime; public class PackageConfigurations { public void CreatePackage() { // Create a new package Package package = new Package(); package.Name = "ConfigurationSample"; // Add a variable, the target for our configurations package.Variables.Add("Variable", false, "User", 0); // Add a connection, for SQL configurations // Add the SQL OLE-DB connection ConnectionManager connectionManagerOleDb = package.Connections.Add("OLEDB"); connectionManagerOleDb.Name = "SQLConnection"; connectionManagerOleDb.ConnectionString = "Provider=SQLOLEDB.1;Data Source=(local);Initial Catalog=master;Integrated Security=SSPI;"; // Add our example configurations, first must enable package setting package.EnableConfigurations = true; // Direct configuration file, see sample file this.ApplyConfig(package, "Configuration File", DTSConfigurationType.ConfigFile, "C:\\Temp\\XmlConfig.dtsConfig", string.Empty); // Indirect configuration file, the emvironment variable XmlConfigFileEnvironmentVariable // contains the path to the configuration file, e.g. C:\Temp\XmlConfig.dtsConfig this.ApplyConfig(package, "Indirect Configuration File", DTSConfigurationType.IConfigFile, "XmlConfigFileEnvironmentVariable", string.Empty); // Direct SQL Server configuration, uses the SQLConnection package connection to read // configurations from the [dbo].[SSIS Configurations] table, with a filter of "SampleFilter" this.ApplyConfig(package, "SQL Server", DTSConfigurationType.SqlServer, "\"SQLConnection\";\"[dbo].[SSIS Configurations]\";\"SampleFilter\";", string.Empty); // Indirect SQL Server configuration, the environment variable "SQLServerEnvironmentVariable" // contains the configuration string e.g. "SQLConnection";"[dbo].[SSIS Configurations]";"SampleFilter"; this.ApplyConfig(package, "Indirect SQL Server", DTSConfigurationType.ISqlServer, "SQLServerEnvironmentVariable", string.Empty); // Direct environment variable, the value of the EnvironmentVariable environment variable is // applied to the target property, the value of the "User::Variable" package variable this.ApplyConfig(package, "EnvironmentVariable", DTSConfigurationType.EnvVariable, "EnvironmentVariable", "\\Package.Variables[User::Variable].Properties[Value]"); #if DEBUG // Save package to disk, DEBUG only new Application().SaveToXml(String.Format(@"C:\Temp\{0}.dtsx", package.Name), package, null); Console.WriteLine(@"C:\Temp\{0}.dtsx", package.Name); #endif // Execute package package.Execute(); // Basic check for warnings foreach (DtsWarning warning in package.Warnings) { Console.WriteLine("WarningCode : {0}", warning.WarningCode); Console.WriteLine(" SubComponent : {0}", warning.SubComponent); Console.WriteLine(" Description : {0}", warning.Description); Console.WriteLine(); } // Basic check for errors foreach (DtsError error in package.Errors) { Console.WriteLine("ErrorCode : {0}", error.ErrorCode); Console.WriteLine(" SubComponent : {0}", error.SubComponent); Console.WriteLine(" Description : {0}", error.Description); Console.WriteLine(); } package.Dispose(); } /// <summary> /// Add or update an package configuration. /// </summary> /// <param name="package">The package.</param> /// <param name="name">The configuration name.</param> /// <param name="type">The type of configuration</param> /// <param name="setting">The configuration setting.</param> /// <param name="target">The target of the configuration, leave blank if not required.</param> internal void ApplyConfig(Package package, string name, DTSConfigurationType type, string setting, string target) { Configurations configurations = package.Configurations; Configuration configuration; if (configurations.Contains(name)) { configuration = configurations[name]; } else { configuration = configurations.Add(); } configuration.Name = name; configuration.ConfigurationType = type; configuration.ConfigurationString = setting; configuration.PackagePath = target; } } } The following table lists the environment variables required for the full example to work along with some sample values. Variable Sample value EnvironmentVariable 1 SQLServerEnvironmentVariable "SQLConnection";"[dbo].[SSIS Configurations]";"SampleFilter"; XmlConfigFileEnvironmentVariable C:\Temp\XmlConfig.dtsConfig Sample code, package and configuration file. ConfigurationApplication.cs ConfigurationSample.dtsx XmlConfig.dtsConfig

Read the article

Building KPIs to monitor your business Its not really about the Technology

When I have discussions with people about Business Intelligence, one of the questions the inevitably come up is about building KPIs and how to accomplish that. From a technical level the concept of a KPI is very simple, almost too simple in that it is like the tip of an iceberg floating above the water. The key to that iceberg is not really the tip, but the mass of the iceberg that is hidden beneath the surface upon which the tip sits. The analogy of the iceberg is not meant to indicate that the foundation of the KPI is overly difficult or complex. The disparity in size in meant to indicate that the larger thing that needs to be defined is not the technical tip, but the underlying business definition of what the KPI means. From a technical perspective the KPI consists of primarily the following items: Actual Value This is the actual value data point that is being measured. An example would be something like the amount of sales. Target Value This is the target goal for the KPI. This is a number that can be measured against Actual Value. An example would be $10,000 in monthly sales. Target Indicator Range This is the definition of ranges that define what type of indicator the user will see comparing the Actual Value to the Target Value. Most often this is defined by stoplight, but can be any indicator that is going to show a status in a quick fashion to the user. Typically this would be something like: Red Light = Actual Value more than 5% below target; Yellow Light = Within 5% of target either direction; Green Light = More than 5% higher than Target Value Status\Trend Indicator This is an optional attribute of a KPI that is typically used to show some kind of trend. The vast majority of these indicators are used to show some type of progress against a previous period. As an example, the status indicator might be used to show how the monthly sales compare to last month. With this type of indicator there needs to be not only a definition of what the ranges are for your status indictor, but then also what value the number needs to be compared against. So now we have an idea of what data points a KPI consists of from a technical perspective lets talk a bit about tools. As you can see technically there is not a whole lot to them and the choice of technology is not as important as the definition of the KPIs, which we will get to in a minute. There are many different types of tools in the Microsoft BI stack that you can use to expose your KPI to the business. These include Performance Point, SharePoint, Excel, and SQL Reporting Services. There are pluses and minuses to each technology and the right technology is based a lot on your goals and how you want to deliver the information to the users. Additionally, there are other non-Microsoft tools that can be used to expose KPI indicators to your business users. Regardless of the technology used as your front end, the heavy lifting of KPI is in the business definition of the values and benchmarks for that KPI. The discussion about KPIs is very dependent on the history of an organization and how much they are exposed to the attributes of a KPI. Often times when discussing KPIs with a business contact who has not been exposed to KPIs the discussion tends to also be a session educating the business user about what a KPI is and what goes into the definition of a KPI. The majority of times the business user has an idea of what their actual values are and they have been tracking those numbers for some time, generally in Excel and all manually. So they will know the amount of sales last month along with sales two years ago in the same month. Where the conversation tends to get stuck is when you start discussing what the target value should be. The actual value is answering the What and How much questions. When you are talking about the Target values you are asking the question Is this number good or bad. Typically, the user will know whether or not the value is good or bad, but most of the time they are not able to quantify what is good or bad. Their response is usually something like I just know. Because they have been watching the sales quantity for years now, they can tell you that a 5% decrease in sales this month might actually be a good thing, maybe because the salespeople are all waiting until next month when the new versions come out. It can sometimes be very hard to break the business people of this habit. One of the fears generally is that the status indicator is not subjective. Thus, in the scenario above, the business user is going to be fearful that their boss, just looking at a negative red indicator, is going to haul them out to the woodshed for a bad month. But, on the flip side, if all you are displaying is the amount of sales, only a person with knowledge of last month sales and the target amount for this month would have any idea if $10,000 in sales is good or not. Here is where a key point about KPIs needs to be communicated to both the business user and any user who might be viewing the results of that KPI. The KPI is just one tool that is used to report on business performance. The KPI is meant as a quick indicator of one business statistic. It is not meant to tell the entire story. It does not answer the question Why. Its primary purpose is to objectively and quickly expose an area of the business that might warrant more review. There is always going to be the need to do further analysis on any potential negative or neutral KPI. So, hopefully, once you have convinced your business user to come up with some target numbers and ranges for status indicators, you then need to take the next step and help them answer the Why question. The main question here to ask is, Okay, you see the indicator and you need to discover why the number is what is, where do you go?. The answer is usually a combination of sources. A sales manager might have some of the following items at their disposal (Marketing report showing a decrease in the promotional discounts for the month, Pricing Report showing the reduction of prices of older models, an Inventory Report showing the discontinuation of a particular product line, or a memo showing the ending of a large affiliate partnership. The answers to the question Why are never as simple as a single indicator value. Bring able to quickly get to this information is all about designing how a user accesses the KPIs and then also how easily they can get to the additional information they need. This is where a Dashboard mentality can come in handy. For example, the business user can have a dashboard that shows their KPIs, but also has links to some of the common reports that they run regarding Sales Data. The users boss may have the same KPIs on their dashboard, but instead of links to individual reports they are going to have a link to a status report that was created by the user that pulls together all the data about the KPI in a summary format the users boss can review. So some of the key things to think about when building or evaluating KPIs for your organization: Technology should not be the driving factor KPIs are of little value without some indicator for whether a value is good, bad or neutral. KPIs only give an answer to the Is this number good\bad? question Make sure the ability to drill into the Why of a KPI is close at hand and relevant to the user who is viewing the KPI. The KPI is a key business tool when defined properly to help monitor business performance across the enterprise in an objective and consistent manner. At times it might feel like the process of defining the business aspects of a KPI can sometimes be arduous, the payoff in the end can far outweigh the costs. Some of the benefits of going through this process are a better understanding of the key metrics for an organization and the measure of those metrics and a consistent snapshot of business performance that can be utilized across the organization. And I think that these are benefits to any organization regardless of the technology or the implementation.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

C#: LINQ vs foreach - Round 1.

- by James Michael Hare

So I was reading Peter Kellner's blog entry on Resharper 5.0 and its LINQ refactoring and thought that was very cool. But that raised a point I had always been curious about in my head -- which is a better choice: manual foreach loops or LINQ? The answer is not really clear-cut. There are two sides to any code cost arguments: performance and maintainability. The first of these is obvious and quantifiable. Given any two pieces of code that perform the same function, you can run them side-by-side and see which piece of code performs better. Unfortunately, this is not always a good measure. Well written assembly language outperforms well written C++ code, but you lose a lot in maintainability which creates a big techncial debt load that is hard to offset as the application ages. In contrast, higher level constructs make the code more brief and easier to understand, hence reducing technical cost. Now, obviously in this case we're not talking two separate languages, we're comparing doing something manually in the language versus using a higher-order set of IEnumerable extensions that are in the System.Linq library. Well, before we discuss any further, let's look at some sample code and the numbers. First, let's take a look at the for loop and the LINQ expression. This is just a simple find comparison: // find implemented via LINQ public static bool FindViaLinq(IEnumerable<int> list, int target) { return list.Any(item => item == target); } // find implemented via standard iteration public static bool FindViaIteration(IEnumerable<int> list, int target) { foreach (var i in list) { if (i == target) { return true; } } return false; } Okay, looking at this from a maintainability point of view, the Linq expression is definitely more concise (8 lines down to 1) and is very readable in intention. You don't have to actually analyze the behavior of the loop to determine what it's doing. So let's take a look at performance metrics from 100,000 iterations of these methods on a List<int> of varying sizes filled with random data. For this test, we fill a target array with 100,000 random integers and then run the exact same pseudo-random targets through both searches. List<T> On 100,000 Iterations Method Size Total (ms) Per Iteration (ms) % Slower Any 10 26 0.00046 30.00% Iteration 10 20 0.00023 - Any 100 116 0.00201 18.37% Iteration 100 98 0.00118 - Any 1000 1058 0.01853 16.78% Iteration 1000 906 0.01155 - Any 10,000 10,383 0.18189 17.41% Iteration 10,000 8843 0.11362 - Any 100,000 104,004 1.8297 18.27% Iteration 100,000 87,941 1.13163 - The LINQ expression is running about 17% slower for average size collections and worse for smaller collections. Presumably, this is due to the overhead of the state machine used to track the iterators for the yield returns in the LINQ expressions, which seems about right in a tight loop such as this. So what about other LINQ expressions? After all, Any() is one of the more trivial ones. I decided to try the TakeWhile() algorithm using a Count() to get the position stopped like the sample Pete was using in his blog that Resharper refactored for him into LINQ: // Linq form public static int GetTargetPosition1(IEnumerable<int> list, int target) { return list.TakeWhile(item => item != target).Count(); } // traditionally iterative form public static int GetTargetPosition2(IEnumerable<int> list, int target) { int count = 0; foreach (var i in list) { if(i == target) { break; } ++count; } return count; } Once again, the LINQ expression is much shorter, easier to read, and should be easier to maintain over time, reducing the cost of technical debt. So I ran these through the same test data: List<T> On 100,000 Iterations Method Size Total (ms) Per Iteration (ms) % Slower TakeWhile 10 41 0.00041 128% Iteration 10 18 0.00018 - TakeWhile 100 171 0.00171 88% Iteration 100 91 0.00091 - TakeWhile 1000 1604 0.01604 94% Iteration 1000 825 0.00825 - TakeWhile 10,000 15765 0.15765 92% Iteration 10,000 8204 0.08204 - TakeWhile 100,000 156950 1.5695 92% Iteration 100,000 81635 0.81635 - Wow! I expected some overhead due to the state machines iterators produce, but 90% slower? That seems a little heavy to me. So then I thought, well, what if TakeWhile() is not the right tool for the job? The problem is TakeWhile returns each item for processing using yield return, whereas our for-loop really doesn't care about the item beyond using it as a stop condition to evaluate. So what if that back and forth with the iterator state machine is the problem? Well, we can quickly create an (albeit ugly) lambda that uses the Any() along with a count in a closure (if a LINQ guru knows a better way PLEASE let me know!), after all , this is more consistent with what we're trying to do, we're trying to find the first occurence of an item and halt once we find it, we just happen to be counting on the way. This mostly matches Any(). // a new method that uses linq but evaluates the count in a closure. public static int TakeWhileViaLinq2(IEnumerable<int> list, int target) { int count = 0; list.Any(item => { if(item == target) { return true; } ++count; return false; }); return count; } Now how does this one compare? List<T> On 100,000 Iterations Method Size Total (ms) Per Iteration (ms) % Slower TakeWhile 10 41 0.00041 128% Any w/Closure 10 23 0.00023 28% Iteration 10 18 0.00018 - TakeWhile 100 171 0.00171 88% Any w/Closure 100 116 0.00116 27% Iteration 100 91 0.00091 - TakeWhile 1000 1604 0.01604 94% Any w/Closure 1000 1101 0.01101 33% Iteration 1000 825 0.00825 - TakeWhile 10,000 15765 0.15765 92% Any w/Closure 10,000 10802 0.10802 32% Iteration 10,000 8204 0.08204 - TakeWhile 100,000 156950 1.5695 92% Any w/Closure 100,000 108378 1.08378 33% Iteration 100,000 81635 0.81635 - Much better! It seems that the overhead of TakeAny() returning each item and updating the state in the state machine is drastically reduced by using Any() since Any() iterates forward until it finds the value we're looking for -- for the task we're attempting to do. So the lesson there is, make sure when you use a LINQ expression you're choosing the best expression for the job, because if you're doing more work than you really need, you'll have a slower algorithm. But this is true of any choice of algorithm or collection in general. Even with the Any() with the count in the closure it is still about 30% slower, but let's consider that angle carefully. For a list of 100,000 items, it was the difference between 1.01 ms and 0.82 ms roughly in a List<T>. That's really not that bad at all in the grand scheme of things. Even running at 90% slower with TakeWhile(), for the vast majority of my projects, an extra millisecond to save potential errors in the long term and improve maintainability is a small price to pay. And if your typical list is 1000 items or less we're talking only microseconds worth of difference. It's like they say: 90% of your performance bottlenecks are in 2% of your code, so over-optimizing almost never pays off. So personally, I'll take the LINQ expression wherever I can because they will be easier to read and maintain (thus reducing technical debt) and I can rely on Microsoft's development to have coded and unit tested those algorithm fully for me instead of relying on a developer to code the loop logic correctly. If something's 90% slower, yes, it's worth keeping in mind, but it's really not until you start get magnitudes-of-order slower (10x, 100x, 1000x) that alarm bells should really go off. And if I ever do need that last millisecond of performance? Well then I'll optimize JUST THAT problem spot. To me it's worth it for the readability, speed-to-market, and maintainability.

Search Results

Search found 12869 results on 515 pages for 'target exists'.

Page 40/515 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47 | Next Page >

- by Kevin Southworth

- by Lewis

- by Robert Menteer

- by Justin Lee

- by user17753

- by user223903

- by Joey Salac Hipolito

- by Buu Nguyen

- by Lewis

- by Greg

- by DocSeuss

- by bobobobo

- by Coder404

- by gracejz

- by Lars Flyger

- by Chrisc

- by FLX

- by Daniel

- by NS

- by PikeCoAL

- by rxzhang

- by user1665283

- by James Michael Hare

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47 | Next Page >