Search Results

Search found 10280 results on 412 pages for 'technology choice'.

Page 40/412 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• SQL SERVER – Basic Calculation and PEMDAS Order of Operation

  - by pinaldave

  After thinking a long time, I have decided to write about this blog post. I had no plan to create a blog post about this subject but the amount of conversation this one has created on my Facebook page, I decided to bring up a few of the question and concerns discussed on the Facebook page. There are more than 10,000 comments here so far. There are lots of discussion about what should be the answer. Well, as far as I can tell there is a big debate going on on Facebook, for educational purpose you should go ahead and read some of the comments. They are very interesting and for sure teach some new stuff. Even though some of the comments are clearly wrong they have made some good points and I believe it for sure develops some logic. Here is my take on this subject. I believe the answer is 9 as I follow PEMDAS  Order of Operation. PEMDAS stands for  parentheses, exponents, multiplication, division, addition, subtraction. PEMDAS is commonly known as BODMAS in India. BODMAS stands for Brackets, Orders (ie Powers and Square Roots, etc), Division, Multiplication,  Addition and Subtraction. PEMDAS and BODMAS are almost same and both of them follow the operation order from LEFT to RIGHT. Let us try to simplify above statement using the PEMDAS or BODMAS (whatever you prefer to call). Step 1: 6 ÷ 2 (1+2) (parentheses first) Step 2: = 6 ÷ 2 * (1+2) (adding multiplication sign for further clarification) Step 3: = 6 ÷ 2* (3) (single digit in parentheses – simplify using operator) Step 4: = 6 ÷ 2 * 3 (Remember next Operation should be LEFT to RIGHT) Step 5: = 3 * 3 (because 6 ÷ 2 = 3; remember LEFT to RIGHT) Step 6: = 9 (final answer) Some often find Step 4 confusing and often ended up multiplying 2 and 3 resulting Step 5 to be 6 ÷ 6, this is incorrect because in this case we did not follow the order of LEFT to RIGHT. When we do not follow the order of operation from LEFT to RIGHT we end up with the answer 1 which is incorrect. Let us see what SQL Server returns as a result. I executed following statement in SQL Server Management Studio SELECT 6/2*(1+2) It is clear that SQL Server also thinks that the answer should be 9. Let us go ahead and ask Google what will be the answer of above question in Google I have searched for the following term: 6/2(1+2) The result also says the answer should be 9. If you want a further reference here is a great video which describes why the answer should be 9 and not 1. And here is a fantastic conversation on Google Groups. Well, now what is your take on this subject? You are welcome to share constructive feedback and your answer may be different from my answer. NOTE: A healthy conversation about this subject is indeed encouraged but if there is a single bad word or comment is flaming it will be deleted without any notification (it does not matter how valuable information it contains). Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQL SERVER – UNION ALL and ORDER BY – How to Order Table Separately While Using UNION ALL

  - by pinaldave

  I often see developers trying following syntax while using ORDER BY. SELECT Columns FROM TABLE1 ORDER BY Columns UNION ALL SELECT Columns FROM TABLE2 ORDER BY Columns However the above query will return following error. Msg 156, Level 15, State 1, Line 5 Incorrect syntax near the keyword ‘ORDER’. It is not possible to use two different ORDER BY in the UNION statement. UNION returns single resultsetand as per the Logical Query Processing Phases. However, if your requirement is such that you want your top and bottom query of the UNION resultset independently sorted but in the same resultset you can add an additional static column and order by that column. Let us re-create the same scenario. First create two tables and populated with sample data. USE tempdb GO -- Create table CREATE TABLE t1 (ID INT, Col1 VARCHAR(100)); CREATE TABLE t2 (ID INT, Col1 VARCHAR(100)); GO -- Sample Data Build INSERT INTO t1 (ID, Col1) SELECT 1, 'Col1-t1' UNION ALL SELECT 2, 'Col2-t1' UNION ALL SELECT 3, 'Col3-t1'; INSERT INTO t2 (ID, Col1) SELECT 3, 'Col1-t2' UNION ALL SELECT 2, 'Col2-t2' UNION ALL SELECT 1, 'Col3-t2'; GO If we SELECT the data from both the table using UNION ALL . -- SELECT without ORDER BY SELECT ID, Col1 FROM t1 UNION ALL SELECT ID, Col1 FROM t2 GO We will get the data in following order. However, our requirement is to get data in following order. If we need data ordered by Column1 we can ORDER the resultset ordered by Column1. -- SELECT with ORDER BY SELECT ID, Col1 FROM t1 UNION ALL SELECT ID, Col1 FROM t2 ORDER BY ID GO Now to get the data in independently sorted in UNION ALL let us add additional column OrderKey and use ORDER BY  on that column. I think the description does not do proper justice let us see the example here. -- SELECT with ORDER BY - with ORDER KEY SELECT ID, Col1, 'id1' OrderKey FROM t1 UNION ALL SELECT ID, Col1, 'id2' OrderKey FROM t2 ORDER BY OrderKey, ID GO The above query will give the desired result. Now do not forget to clean up the database by running the following script. -- Clean up DROP TABLE t1; DROP TABLE t2; GO Here is the complete script used in this example. USE tempdb GO -- Create table CREATE TABLE t1 (ID INT, Col1 VARCHAR(100)); CREATE TABLE t2 (ID INT, Col1 VARCHAR(100)); GO -- Sample Data Build INSERT INTO t1 (ID, Col1) SELECT 1, 'Col1-t1' UNION ALL SELECT 2, 'Col2-t1' UNION ALL SELECT 3, 'Col3-t1'; INSERT INTO t2 (ID, Col1) SELECT 3, 'Col1-t2' UNION ALL SELECT 2, 'Col2-t2' UNION ALL SELECT 1, 'Col3-t2'; GO -- SELECT without ORDER BY SELECT ID, Col1 FROM t1 UNION ALL SELECT ID, Col1 FROM t2 GO -- SELECT with ORDER BY SELECT ID, Col1 FROM t1 UNION ALL SELECT ID, Col1 FROM t2 ORDER BY ID GO -- SELECT with ORDER BY - with ORDER KEY SELECT ID, Col1, 'id1' OrderKey FROM t1 UNION ALL SELECT ID, Col1, 'id2' OrderKey FROM t2 ORDER BY OrderKey, ID GO -- Clean up DROP TABLE t1; DROP TABLE t2; GO I am sure there are many more ways to achieve this, what method would you use if you have to face the similar situation? Reference: Pinal Dave (http://blog.sqlauthority.com)   Filed under: Best Practices, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQL SERVER – Puzzle to Win Print Book – Functions FIRST_VALUE and LAST_VALUE with OVER clause and ORDER BY

  - by pinaldave

  Some time an interesting feature and smart audience makes total difference at places. From last two days, I have been writing on SQL Server 2012 feature FIRST_VALUE and LAST_VALUE. Please read following post before I continue today as this question is based on the same. Introduction to FIRST_VALUE and LAST_VALUE Introduction to FIRST_VALUE and LAST_VALUE with OVER clause As a comment of the second post I received excellent question from Nilesh Molankar. He asks what will happen if we change few things in the T-SQL. I really like this question as this kind of questions will make us sharp and help us perform in critical situation in need. We recently publish SQL Server Interview Questions book. I promise that in future version of this book, we will for sure include this question. Instead of repeating his question, I am going to ask something very similar to his question. Let us first run following query (read yesterday’s blog post for more detail): USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Here is the resultset of the above query. Now let us change the ORDER BY clause of OVER clause in above query and see what is the new result. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Now let us see the result and ready for interesting question: Puzzle You can see that row number 2, 3, 4, and 5 has same SalesOrderID = 43667. The FIRST_VALUE is 78 and LAST_VALUE is 77. Now if these function was working on maximum and minimum value they should have given answer as 77 and 80 respectively instead of 78 and 77. Also the value of FIRST_VALUE is greater than LAST_VALUE 77. Why? Explain in detail. Hint Let me give you a simple hint. Just for simplicity I have changed the order of columns selected in the SELECT and ORDER BY (at the end). This will not change resultset but just order of the columns as well order of the rows. However, the data remains the same. USE AdventureWorks GO SELECT s.OrderQty,s.SalesOrderID,s.SalesOrderDetailID, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.OrderQty,s.SalesOrderID,s.SalesOrderDetailID GO Above query returns following result: Now I am very sure all of you have figured out the solution. Here is the second hint – pay attention to row 2, 3, 4, and 10. Hint2 T-SQL Enhancements: FIRST_VALUE() and LAST_VALUE() MSDN: FIRST_VALUE and LAST_VALUE Rules Leave a comment with your detailed answer by Nov 15′s blog post. Open world-wide (where Amazon ships books) If you blog about puzzle’s solution and if you win, you win additional surprise gift as well. Prizes Print copy of my new book SQL Server Interview Questions Amazon|Flipkart If you already have this book, you can opt for any of my other books SQL Wait Stats [Amazon|Flipkart|Kindle] and SQL Programming [Amazon|Flipkart|Kindle]. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQL – Step by Step Guide to Download and Install NuoDB – Getting Started with NuoDB

  - by Pinal Dave

  Let us take a look at the application you own at your business. If you pay attention to the underlying database for that application you will be amazed. Every successful business these days processes way more data than they used to process before. The number of transactions and the amount of data is growing at an exponential rate. Every single day there is way more data to process than before. Big data is no longer a concept; it is now turning into reality. If you look around there are so many different big data solutions and it can be a quite difficult task to figure out where to begin. Personally, I have been experimenting with a lot of different solutions which allow my database to scale immediately without much hassle while maintaining optimal database performance.  There are for sure some solutions out there, but for many I even have to learn their specific language and there is a lot of new exploration to do. Honestly, what I prefer is a product, which works with the language I know (SQL) and follows all the RDBMS concepts which I am familiar with (ACID etc.). NuoDB is one such solution.  It is an operational NewSQL database built on a patented emergent architecture with full support for SQL and ACID guarantees. In this blog post, I will explore how one can download and install NuoDB database. Step 1: Follow me and go to the NuoDB download page. Simply fill out the form, accept the online license agreement, and you will be taken directly to a page where you can select any platform you prefer to install NuoDB. In my example below, I select the Windows 64-bit platform as it is one of the most popular NuoDB platforms. (You can also run NuoDB on Amazon Web Services but I prefer to install it on my local machine for the purposes of this blog). Step 2: Once you have downloaded the NuoDB installer, double click on it to install it on the Windows platform. Here is the enlarged the icon of the installer. Step 3: Follow the wizard installation, as it is pretty straight forward and easy to do so. I have selected all the options to install as the overall installation is very simple and it does not take up much space. I have installed it on my C drive but you can select your preferred drive. It is quite possible that if you do not have 64 bit Java, it will throw following error. If you face following error, I suggest you to download 64-bit Java from here. Make sure that you download 64-bit Java from following link: http://java.com/en/download/manual.jsp If already have Java 64-bit installed, you can continue with the installation as described in following image. Otherwise, install Java and start from with Step 1. As in my case, I already have 64-bit Java installed – and you won’t believe me when I say that the entire installation of NuoDB only took me around 90 seconds. Click on Finish to end to exit the installation. Step 4: Once the installation is successful, NuoDB will automatically open the following two tabs – Console and DevCenter — in your preferred browser. On the Console tab you can explore various components of the NuoDB solution, e.g. QuickStart, Admin, Explorer, Storefront and Samples. We will see various components and their usage in future blog posts. If you follow these steps in this post, which I have followed to install NuoDB, you will agree that the installation of NuoDB is extremely smooth and it was indeed a pleasure to install a database product with such ease. If you have installed other database products in the past, you will absolutely agree with me. So download NuoDB and install it today, and in tomorrow’s blog post I will take the installation to the next level. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

  Read the article

• SQL SERVER – Performance Tuning Resolution

  - by pinaldave

  This blog post is written in response to T-SQL Tuesday hosted by MidnightDBAs. Taking resolutions is such an interesting subject. I think just like records, these are broken way more often. I find this is the funniest thing as we all take resolutions every year but not every year, we can manage to keep them. Well, does it mean we should not take resolutions? In fact I support resolutions. Every year, I take a resolution that I will strive reduce my body weight and I usually manage to keep eating healthy till the end of January. When February begins, I begin to loose focus from my goal and as March starts, the “As usual” eating habits begin. Looking at the positive side, what would happen if every year I do not eat healthy in January, I think that might cause terrible consequences to my health in the long run. So keeping resolutions is a good practise and following them to the extent one can is commendable. Let us come back to the world of SQL Server. What is my resolution for year 2011 for SQL Server? There are many, I am going to list three of very important resolutions that I have taken this new year over here. To understand SQL Server Performance Tuning at a deeper Level I think I am already half way through. I have been being very much busy during any given month doing hands-on performance tuning for at least 12 days on an average. That means, I am doing this activity for almost doing 2 weeks a month. I believe that I have a good understanding of the subject. Note that the word that I have used is “good,” and not “best.” There are often cases when I am stumped, and I have no clue of what to do next. Then, I usually go for my “trial and error” method - whichever method works, I make sure to keep a note on my blog. My goal is that I should never ever go for the trial and error method again to achieve the same solution. I should know the solution right away when I see the problem. I do understand that Performance Tuning can be a strange animal at times and one cannot guess the right step every time. However, aiming a high goal never hurts and I am going to learn more and more in this focused area. Going further from Basic BI understanding I do fairly decent with BI concepts. I know the nbasics of SSIS, SSRS, SSAS, PowerPivot and SharePoint (and few other things MDS, StreamInsight, etc). However, I still consider myself as a beginner. I do not have hands-on experience like many other BI Gurus around. I think I want to take my learning further in this direction. I do not want to be a BI expert as the first step but the goal is to move ahead from basic level towards an advanced level. I am going to start presenting in User Group Sessions and other places on this subject. When I have to prepare new subject for presentations, I think I force myself to learn more. I am committed to learn a bit more in this direction. Learning new features SQL Server 2011 Denali This is new thing from “Microsoft” for all the SQL Geeks. I am eagerly waiting for final product later this year and I am planning to learn it well. I think if I follow my above two goals, I think this goal will be automatically covered. I am eager and excited for this new offering from Microsoft. I guess, these are my resolutions; may be next year about the same time, I must revisit this post and see how much successful I am in following my goal. On a lighter note, I am particularly fan of following cartoon strip (Courtesy: Calvin and Hobbes). I think when we cannot resolve our resolutions, we tend to act like Calvin. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQL SERVER – Introduction to Big Data – Guest Post

  - by pinaldave

  BIG Data – such a big word – everybody talks about this now a days. It is the word in the database world. In one of the conversation I asked my friend Jasjeet Sigh the same question – what is Big Data? He instantly came up with a very effective write-up.  Jasjeet is working as a Technical Manager with Koenig Solutions. He leads the SQL domain, and holds rich IT industry experience. Talking about Koenig, it is a 19 year old IT training company that offers several certification choices. Some of its courses include SharePoint Training, Project Management certifications, Microsoft Trainings, Business Intelligence programs, Web Design and Development courses etc. Big Data, as the name suggests, is about data that is BIG in nature. The data is BIG in terms of size, and it is difficult to manage such enormous data with relational database management systems that are quite popular these days. Big Data is not just about being large in size, it is also about the variety of the data that differs in form or type. Some examples of Big Data are given below : Scientific data related to weather and atmosphere, Genetics etc Data collected by various medical procedures, such as Radiology, CT scan, MRI etc Data related to Global Positioning System Pictures and Videos Radio Frequency Data Data that may vary very rapidly like stock exchange information Apart from difficulties in managing and storing such data, it is difficult to query, analyze and visualize it. The characteristics of Big Data can be defined by four Vs: Volume: It simply means a large volume of data that may span Petabyte, Exabyte and so on. However it also depends organization to organization that what volume of data they consider as Big Data. Variety: As discussed above, Big Data is not limited to relational information or structured Data. It can also include unstructured data like pictures, videos, text, audio etc. Velocity:  Velocity means the speed by which data changes. The higher is the velocity, the more efficient should be the system to capture and analyze the data. Missing any important point may lead to wrong analysis or may even result in loss. Veracity: It has been recently added as the fourth V, and generally means truthfulness or adherence to the truth. In terms of Big Data, it is more of a challenge than a characteristic. It is difficult to ascertain the truth out of the enormous amount of data and the one that has high velocity. There are always chances of having un-precise and uncertain data. It is a challenging task to clean such data before it is analyzed. Big Data can be considered as the next big thing in the IT sector in terms of innovation and development. If appropriate technologies are developed to analyze and use the information, it can be the driving force for almost all industrial segments. These include Retail, Manufacturing, Service, Finance, Healthcare etc. This will help them to automate business decisions, increase productivity, and innovate and develop new products. Thanks Jasjeet Singh for an excellent write up.  Jasjeet Sign is working as a Technical Manager with Koenig Solutions. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Database, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Big Data

  Read the article

• SQLAuthority News – Getting Ready to Learn SQL Server

  - by pinaldave

  If you have read my earlier blog post you must be aware of how I am always eager to learn new things. I have signed up for three days learning course at Koenig Solutions for End to End SQL Server Business Intelligence. You may wonder why I sign up for the course on SQL Server when it seems that I know a lot about it. Well, the belief is incorrect that I know a lot. I think there are plenty of things which I have been dreaming to learn. Why am I learning SQL Server? First of all – I do not know everything and second it is always a good idea to learn more. No matter how old we get or how much we think we know – there are always details which we can learn and refresh few concepts. Learning is never ending process philosophically but it is true as well in reality. SQL Server 2012 is already released earlier this year and there are plenty of enhancements released. Recently I was going over the list of the all the new feature and enhancement and I realized that there few things about SQL Server 2008 R2 I never got a chance to have a hand’s on experience and we have entered into the era of SQL Server 2012. I feel a bit bad about it and I decided to make it a priority for me to learn all the missing experiences. Quick Action – Registration The very same day I called up my friend who owns Koenig Solution and expressed my concern and requested his help. During my early career when I was a SQL Server Trainer, we had some good synergy between us and now they are very successful offshore training company by having a physical location in Delhi,  Goa, Dahradun, Shimla, Goa and Bangalore. I quickly visited their Bangalore Center and paid my fees for learning SQL Server Business Intelligence course. Very next second I got call from my friend suggesting that I learn this course from Delhi instead of Bangalore. As per him I should travel to Delhi and learn the course how other students are learning “Away from Home”. This made sense as I stay in Bangalore and if I return home after a long day of learning, I will be not able to practice for the next day as there will be “sweet distraction” of the family. Well I opted for Delhi. What Registration Fees Included I learned from registration processes that the following were included in the fees. 3 meals every day (hearty breakfast, lunch from premium restaurants and home cooked like dinner) Airport pick up and drop Hotel Stay Internet at hotel and at learning institute Unlimited coffee and snacks at learning institute Printed Learning Material Certification Fees (if applicable) Learning material … And of course classroom training I thought registration process was over when I paid fees. Well, I was in for a very nice surprise. Registration Experience – Bliss! Within few hours I received emails from Center Manager of Delhi with all the necessary details I need to know about my learning experience. The email contained following information in detail and it blew me away. Details of the pick up from airport – driver information Details of Delhi and important information List of all the important people and emergency contact details Internet connection details Detail of the trainer and all the training details and lots of other relevant information Well so far everything looks great. Tomorrow I will reach to Delhi and I will share how things go on. Any suggestion for things to do in Delhi? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

  Read the article

• SQLAuthority News – Random Thoughts and Random Ideas

  - by pinaldave

  There are days when I keep on wondering about SQL, and even my life overall. Today is Saturday so I decided to write about SQL Server. Just like any other mornings, I woke up at 5 and opened my blog editor. I usually do not open Twitter or Facebook when I am planning to focus on my work, as they are little distractions for me. But today I opened my Twitter account and came across a very interesting quote from a friend: ‘Can I expect you to be different today?’ Well, I think it was very powerful quote for me to read first thing on a new day. This quote froze me for a while and made me think, “Do I really want to write about an SQL Server tip, or something different?”  After a little thinking, I’ve realized that for today I would go on and write something different. I am going to write about a few of the ideas and thoughts I had yesterday. After writing all these, I realized that if I am thinking so much in a day, and if I write a blog post of my random musing of the week or month, it can be so long (and boring). Here are some of my random thoughts I’d like to share with you: When the airplane lands, why does everybody get up and try to rush out when their luggage would be coming probably 20-30 minutes later? I really do not like this question when it was asked to me: “SQL Server is not using optimal index which I just created – how can I force it?” I am not going elaborate on this statement but you are allowed to in the comment section. Why do some people wish Good Morning even when they meet us after 4 PM? Can I optimize a query so much that it gives me a result before I execute it? Is it corruption when someone does their personal household work at office? The lane where I drive is always the slowest lane. Why waste time on correcting others when there are a lot of pending improvements for ourselves? If I have to get Tattoo, which SQL Server Execution Plan symbol should I get? Why do I reach office so early that the coffee machine is yet running its daily cleaning job? Why does every laptop have a ‘Page Up’ key at different locations on the keyboard? While I like color movies, I really appreciate black and white photographs. I do not appreciate statements like, “If I receive your books in PDF, I will spread it to many people to give you much greater exposure. So would you please send them to me ASAP?” Do not tell me, “Why does the database grow back after shrinking it every day?” I suggest you use “Search this blog” for the explanation. Petrol prices are currently at INR 74. I hope the rate remains there. Let me ask you the same question which started my day today:  “Can I expect you to be different today?” Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQLAuthority News – Who I Am And How I Got Here – True Story as Blog Post

  - by pinaldave

  Here are few of the sample questions I get every day? “Give me shortcut to become superstar?” “How do I become like you?” “Which book I should read so I know everything?” “Can you share your secret to be successful? I want to know it but do not share with others.” There is generic answer I always give is to work hard and read good educational material or watch good online videos. One of the emails really caught my attention. It was from a friend and SQL Server Expert John Sansom (Blog | Twitter). He wrote if I would like to share my story with the world about “Who I am and How I got Here”. I was very much intrigued with his suggestion. John is one guy I respect a lot. Every single topic he writes, I read it with dedication. I eagerly wait for his Weekly Summary of Best SQL Links. If you have not read them, you are missing something out. Writing a guest post for him was like walking in memory lane. I remembered the time when I was beginning my career and I was bit overconfident and bit naive. I had my share of mistakes when I started my career. As time passed by I realize the truth. Well, we all do mistakes. Though, I am proud that as soon as I know my mistakes I corrected them. I never acted on impulse or when I am angry. I think that alone has helped me analysis the situation better and become better human being. During the course, I have lost my ego and it is replaced by passion. I am much more happy and successful in my work. Quite often people ask me if I am always online and wether I have family or not. Honestly, I am able to work hard because of my family. They support me and they encourage me to be enjoy in what I do. They support everything I do and personally, I do not miss a single occasion to join them in daily chores of fun. If there was a shortcut to success – I want know. I learnt SQL Server hard way and I am still learning. There are so many things, I have to learn. There is not enough time to learn everything which we want to learn. I am constantly working on it every day. I welcome you to join my journey as well. Please join me with my journey to learn SQL Server – more the merrier. I have written a story of my life as a guest post.  Read Here: A Journey to SQL Authority Special thanks to John Sansom (Blog | Twitter) for giving me space to talk my story. Indeed I am honored. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: About Me, Best Practices, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQL SERVER – Why Do We Need Master Data Management – Importance and Significance of Master Data Management (MDM)

  - by pinaldave

  Let me paint a picture of everyday life for you.  Let’s say you and your wife both have address books for your groups of friends.  There is definitely overlap between them, so that you both have the addresses for your mutual friends, and there are addresses that only you know, and some only she knows.  They also might be organized differently.  You might list your friend under “J” for “Joe” or even under “W” for “Work,” while she might list him under “S” for “Joe Smith” or under your name because he is your friend.  If you happened to trade, neither of you would be able to find anything! This is where data management would be very important.  If you were to consolidate into one address book, you would have to set rules about how to organize the book, and both of you would have to follow them.  You would also make sure that poor Joe doesn’t get entered twice under “J” and under “S.” This might be a familiar situation to you, whether you are thinking about address books, record collections, books, or even shopping lists.  Wherever there is a lot of data to consolidate, you are going to run into problems unless everyone is following the same rules. I’m sure that my readers can figure out where I am going with this.  What is SQL Server but a computerized way to organize data?  And Microsoft is making it easier and easier to get all your “addresses” into one place.  In the  2008 version of SQL they introduced a new tool called Master Data Services (MDS) for Master Data Management, and they have improved it for the new 2012 version. MDM was hailed as a major improvement for business intelligence.  You might not think that an organizational system is terribly exciting, but think about the kind of “address books” a company might have.  Many companies have lots of important information, like addresses, credit card numbers, purchase history, and so much more.  To organize all this efficiently so that customers are well cared for and properly billed (only once, not never or multiple times!) is a major part of business intelligence. MDM comes into play because it will comb through these mountains of data and make sure that all the information is consistent, accurate, and all placed in one database so that employees don’t have to search high and low and waste their time. MDM also has operational MDM functions.  This is not a redundancy.  Operational MDM means that when one employee updates one bit of information in the database, for example – updating a new address for a customer, operational MDM ensures that this address is updated throughout the system so that all departments will have the correct information. Another cool thing about MDM is that it features Master Data Services Configuration Manager, which is exactly what it sounds like.  It has a built-in “helper” that lets you set up your database quickly, easily, and with the correct configurations.  While talking about cool features, I can’t skip over the add-in for Excel.  This allows you to link certain data to Excel files for easier sharing and uploading. In summary, I want to emphasize that the scariest part of the database is slowly disappearing.  Everyone knows that a database – one consolidated area for all your data – is a good idea, but the idea of setting one up is daunting.  But SQL Server is making data management easier and easier with features like Master Data Services (MDS). Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Master Data Services, MDM

  Read the article

• SQL SERVER – BACKUPIO, BACKUPBUFFER – Wait Type – Day 14 of 28

  - by pinaldave

  Backup is the most important task for any database admin. Your data is at risk if you are not performing database backup. Honestly, I have seen many DBAs who know how to take backups but do not know how to restore it. (Sigh!) In this blog post we are going to discuss about one of my real experiences with one of my clients – BACKUPIO. When I started to deal with it, I really had no idea how to fix the issue. However, after fixing it at two places, I think I know why this is happening but at the same time, I am not sure the fix is the best solution. The reality is that the fix is not a solution but a workaround (which is not optimal, but get your things done). From Book On-Line: BACKUPIO Occurs when a backup task is waiting for data, or is waiting for a buffer in which to store data. This type is not typical, except when a task is waiting for a tape mount. BACKUPBUFFER Occurs when a backup task is waiting for data, or is waiting for a buffer in which to store data. This type is not typical, except when a task is waiting for a tape mount. BACKUPIO and BACKUPBUFFER Explanation: This wait stats will occur when you are taking the backup on the tape or any other extremely slow backup system. Reducing BACKUPIO and BACKUPBUFFER wait: In my recent consultancy, backup on tape was very slow probably because the tape system was very old. During the time when I explained this wait type reason in the consultancy, the owners immediately decided to replace the tape drive with an alternate system. They had a small SAN enclosure not being used on side, which they decided to re-purpose. After a week, I had received an email from their DBA, saying that the wait stats have reduced drastically. At another location, my client was using a third party tool (please don’t ask me the name of the tool) to take backup. This tool was compressing the backup along with taking backup. I have had a very good experience with this tool almost all the time except this one sparse experience. When I tried to take backup using the native SQL Server compressed backup, there was a very small value on this wait type and the backup was much faster. However, when I attempted with the third party backup tool, this value was very high again and was taking much more time. The third party tool had many other features but the client was not using these features. We end up using the native SQL Server Compressed backup and it worked very well. If I get to see this higher in my future consultancy, I will try to understand this wait type much more in detail and so probably I would able to come to some solid solution. Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussion of Wait Stats in this blog is generic and varies from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• SQLAuthority News – Stay Connected and Social Media

  - by pinaldave

  I think I have finally gotten back my faith in social media. If you are following my blog I am sure you are aware of my views on social media – SQLAuthority News – Social Media Confusion – Twitter, FaceBook, LinkedIn and Me. I was not happy about how social media was evolving. Whenever I go to Twitter, LinkedIn or Facebook, I noticed the same updates everywhere. I just thought I was wasting my time doing the same thing everywhere. I strongly believe that there is no dictator on internet. Nobody has authority over others, everybody can express their ideas as long as it is not violating others privacy and it is not morally wrong. I have decided that instead of trying to improve the world, I should change myself and adjust my needs. Here are few things I have done to relieve my social media confusion. Twitter I un-followed people who were taking up my time with too many updates. I un-followed people who hardly updated at all. I did not follow anybody else’s list, as I have no control over who other people follow. I follow not only serious SQL people but some fun stuff as well. I removed all my friends who were on Facebook and repeating the same updates on Twitter. I engage with them on Facebook. I followed people who are very conversational on Twitter. I let anybody follow me. I update all my blog posts through at least five tweets online. I decided to re-tweet at least five of my favorite tweets of the day, this way I force myself to remain active in the community. Follow me on Twitter! LinkedIn I updated my career and professional info on LinkedIn. I keep my LinkedIn profile updated with my latest jobs and career news. I let anybody connect with me on LinkedIn. I specify my email address in my profile, keeping it easy for those who want to add me. I read all the profile related updates of my connections – it is very valuable to know who is where and what changes are happening. I do not add my personal tweets or comments in LinkedIn profile. I just keep it professional. Link with me at LinkedIn Facebook I use Facebook only for personal friends. I visit all of my friends at regular intervals and make sure that they are really my friends. I often remove my friends from my Twitter list who are sending duplicate updates. I upload my family photos as well as family updates on Facebook, making sure that only my approved friends are able to read my updates. I keep my Facebook very personal and I often chat with my friends on Facebook chat. I am no longer confused about social media and I think I am using it appropriately. As I said, one cannot decide for others how to use social media, you can only decide for yourself. I have finally found my peace with social media. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQL SERVER – A Puzzle Part 4 – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value

  - by pinaldave

  It seems like every weekend I get a new puzzle in my mind. Before continuing I suggest you read my previous posts here where I have shared earlier puzzles. A Puzzle – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value  A Puzzle Part 2 – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value A Puzzle Part 3 – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value After reading above three posts, I am very confident that you all will be ready for the next set of puzzles now. First execute the script which I have written here. Now guess what will be the next value as requested in the query. USE TempDB GO -- Create sequence CREATE SEQUENCE dbo.SequenceID AS DECIMAL(3,0) START WITH 1 INCREMENT BY -1 MINVALUE 1 MAXVALUE 3 CYCLE NO CACHE; GO SELECT next value FOR dbo.SequenceID; -- Guess the number SELECT next value FOR dbo.SequenceID; -- Clean up DROP SEQUENCE dbo.SequenceID; GO Please note that Starting value is 1, Increment value is the negative value of -1 and Minimum value is 3. Now let us first assume how this will work out. In our example of the sequence starting value is equal to 1 and decrement value is -1, this means the value should decrement from 1 to 0. However, the minimum value is 1. This means the value cannot further decrement at all. What will happen here? The natural assumption is that it should throw an error. How many of you are assuming about query will throw an ERROR? Well, you are WRONG! Do not blame yourself, it is my fault as I have told you only half of the story. Now if you have voted for error, let us continue running above code in SQL Server Management Studio. The above script will give the following output: Isn’t it interesting that instead of error out it is giving us result value 3. To understand the answer about the same, carefully observe the original syntax of creating SEQUENCE – there is a keyword CYCLE. This keyword cycles the values between the minimum and maximum value and when one of the range is exhausted it cycles the values from the other end of the cycle. As we have negative incremental value when query reaches to the minimum value or lower end it will cycle it from the maximum value. Here the maximum value is 3 so the next logical value is 3. If your business requirement is such that if sequence reaches the maximum or minimum value, it should throw an error, you should not use the keyword cycle, and it will behave as discussed. I hope, you are enjoying the puzzles as much as I am enjoying it. If you have any interesting puzzle to share, please do share with me and I will share this on blog with due credit to you. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• SQL SERVER – Puzzle #1 – Querying Pattern Ranges and Wild Cards

  - by Pinal Dave

  Note: Read at the end of the blog post how you can get five Joes 2 Pros Book #1 and a surprise gift. I have been blogging for almost 7 years and every other day I receive questions about Querying Pattern Ranges. The most common way to solve the problem is to use Wild Cards. However, not everyone knows how to use wild card properly. SQL Queries 2012 Joes 2 Pros Volume 1 – The SQL Queries 2012 Hands-On Tutorial for Beginners Book On Amazon | Book On Flipkart Learn SQL Server get all the five parts combo kit Kit on Amazon | Kit on Flipkart Many people know wildcards are great for finding patterns in character data. There are also some special sequences with wildcards that can give you even more power. This series from SQL Queries 2012 Joes 2 Pros® Volume 1 will show you some of these cool tricks. All supporting files are available with a free download from the www.Joes2Pros.com web site. This example is from the SQL 2012 series Volume 1 in the file SQLQueries2012Vol1Chapter2.2Setup.sql. If you need help setting up then look in the “Free Videos” section on Joes2Pros under “Getting Started” called “How to install your labs” Querying Pattern Ranges The % wildcard character represents any number of characters of any length. Let’s find all first names that end in the letter ‘A’. By using the percentage ‘%’ sign with the letter ‘A’, we achieve this goal using the code sample below: SELECT * FROM Employee WHERE FirstName LIKE '%A' To find all FirstName values beginning with the letters ‘A’ or ‘B’ we can use two predicates in our WHERE clause, by separating them with the OR statement. Finding names beginning with an ‘A’ or ‘B’ is easy and this works fine until we want a larger range of letters as in the example below for ‘A’ thru ‘K’: SELECT * FROM Employee WHERE FirstName LIKE 'A%' OR FirstName LIKE 'B%' OR FirstName LIKE 'C%' OR FirstName LIKE 'D%' OR FirstName LIKE 'E%' OR FirstName LIKE 'F%' OR FirstName LIKE 'G%' OR FirstName LIKE 'H%' OR FirstName LIKE 'I%' OR FirstName LIKE 'J%' OR FirstName LIKE 'K%' The previous query does find FirstName values beginning with the letters ‘A’ thru ‘K’. However, when a query requires a large range of letters, the LIKE operator has an even better option. Since the first letter of the FirstName field can be ‘A’, ‘B’, ‘C’, ‘D’, ‘E’, ‘F’, ‘G’, ‘H’, ‘I’, ‘J’ or ‘K’, simply list all these choices inside a set of square brackets followed by the ‘%’ wildcard, as in the example below: SELECT * FROM Employee WHERE FirstName LIKE '[ABCDEFGHIJK]%' A more elegant example of this technique recognizes that all these letters are in a continuous range, so we really only need to list the first and last letter of the range inside the square brackets, followed by the ‘%’ wildcard allowing for any number of characters after the first letter in the range. Note: A predicate that uses a range will not work with the ‘=’ operator (equals sign). It will neither raise an error, nor produce a result set. --Bad query (will not error or return any records) SELECT * FROM Employee WHERE FirstName = '[A-K]%' Question: You want to find all first names that start with the letters A-M in your Customer table and end with the letter Z. Which SQL code would you use? a. SELECT * FROM Customer WHERE FirstName LIKE 'm%z' b. SELECT * FROM Customer WHERE FirstName LIKE 'a-m%z' c. SELECT * FROM Customer WHERE FirstName LIKE 'a-m%z' d. SELECT * FROM Customer WHERE FirstName LIKE '[a-m]%z' e. SELECT * FROM Customer WHERE FirstName LIKE '[a-m]z%' f. SELECT * FROM Customer WHERE FirstName LIKE '[a-m]%z' g. SELECT * FROM Customer WHERE FirstName LIKE '[a-m]z%' Contest Leave a valid answer before June 18, 2013 in the comment section. 5 winners will be selected from all the valid answers and will receive Joes 2 Pros Book #1. 1 Lucky person will get a surprise gift from Joes 2 Pros. The contest is open for all the countries where Amazon ships the book (USA, UK, Canada, India and many others). Special Note: Read all the options before you provide valid answer as there is a small trick hidden in answers. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQL SERVER – Identifying Column Data Type of uniqueidentifier without Querying System Tables

  - by pinaldave

  I love interesting conversations with related to SQL Server. One of my friends Madhivanan always comes up with an interesting point of conversation. Here is one of the conversation between us. I am very confident this blog post will for sure enable you with some new knowledge. Madhi: How do I know if any table has a uniqueidentifier column used in it? Pinal:  I am sure you know that you can do it through some DMV or catalogue views. Madhi: I know that but how can we do that without using DMV or catalogue views? Pinal: Hm… what can I use? Madhi: You can use table name. Pinal: Easy, just say SELECT YourUniqueIdentCol FROM Table. Madhi: Hold on, the question seems to be not clear to you – you do know the name of the column. The matter of the fact, you do not know if the table has uniqueidentifier column. Only information you have is table name. Pinal: Madhi, this seems like you are changing the question when I am close to answer. Madhi: Well, are you clear now? Let me say it again – How do I know if any table has a uniqueidentifier column and what is its value without using any DMV or System Catalogues? Only information you know is table name and you are allowed to return any kind of error if table does not have uniqueidentifier column. Pinal: Do you know the answer? Madhi: Yes. I just wanted to test your knowledge about SQL. Pinal: I will have to think. Let me accept I do not know it right away. Can you share the answer please? Madhi: I won! Here it goes! Pinal: When I have friends like you – who needs enemies? Madhi: (laughter which did not stop for a minute). CREATE TABLE t ( GuidCol UNIQUEIDENTIFIER DEFAULT newsequentialid() ROWGUIDCOL, data VARCHAR(60) ) INSERT INTO t (data) SELECT 'test' INSERT INTO t (data) SELECT 'test1' SELECT $rowguid FROM t DROP TABLE t This is indeed very interesting to me. Please note that this is not the optimal way and there will be many other ways to retrieve uniqueidentifier name and value. What I learned from this was if I am in a rush to check if the table has uniqueidentifier and I do not know the name of the same, I can use SELECT TOP (1) $rowguid and quickly know the name of the column. I can later use the same columnname in my query. Madhi did teach me this new trick. Did you know this? What are other ways to get the check uniqueidentifier column existence in a database? Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQL SERVER – #TechEdIn – Presenting Tomorrow on Speed Up! – Parallel Processes and Unparalleled Performance at TechEd India 2012

  - by pinaldave

  Performance tuning is always a very hot topic when it is about SQL Server. SQL Server Performance Tuning is a very challenging subject that requires expertise in Database Administration and Database Development. I always have enjoyed talking about SQL Server Performance tuning subject. However, in India, it’s actually the very first time someone is presenting on this interesting subject, so this time I had the biggest challenge to present this session. Frequently enough, we get these two kind of questions: How to turn off parallelism as it is reducing performance? How to turn on parallelism as I want more performance? The reality is that not everyone knows what exactly is needed by their system. In this session, I have attempted to answer this very question. I’ve decided to provide a balanced view but stay away from theory, which leads us to say “It depends”. The session will have a clear message about this towards its end. Deck Details Slides: 45+ Demos: 7+ Bonus Quiz: 5 Images: 10+ Session delivery time: 52 Mins + 8 Mins of Q & A I have presented this session a couple of times to my friends and so far have received good feedback. Oftentimes, when people hear that I am going to present 45 slides, they all say it is too much to cover. However, when I am done with the session the usual reaction is that I truly gave justice to those slides. Action Item Here are a few of the action items for all of those who are going to attend this session: If you want to attend the session, just come early. There’s a good chance that you may not get a seat because right before me, there is a session from SQL Guru Vinod Kumar. He performs a powerful delivery of million concepts in just a little time. Quiz. I will be asking few questions during the session as well as before the session starts. If you get the correct answer, I will give unique learning material for you. You may not want to miss this learning opportunity at any cosst. Session Details Title: Speed Up! – Parallel Processes and Unparalleled Performance (Add to Calendar) Abstract: “More CPU, More Performance” – A  very common understanding is that usage of multiple CPUs can improve the performance of the query. To get a maximum performance out of any query, one has to master various aspects of the parallel processes. In this deep-dive session, we will explore this complex subject with a very simple interactive demo. Attendees will walk away with proper understanding of CX_PACKET wait types, MAXDOP, parallelism threshold and various other concepts. Date and Time: March 23, 2012, 12:15 to 13:15 Location: Hotel Lalit Ashok - Kumara Krupa High Grounds, Bengaluru – 560001, Karnataka, India. Add to Calendar Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Interview Questions and Answers, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• SQL SERVER – Renaming Index – Index Naming Conventions

  - by pinaldave

  If you are regular reader of this blog, you must be aware of that there are two kinds of blog posts 1) I share what I learn recently 2) I share what I learn and request your participation. Today’s blog post is where I need your opinion to make this blog post a good reference for future. Background Story Recently I came across system where users have changed the name of the few of the table to match their new standard naming convention. The name of the table should be self explanatory and they should have explain their purpose without either opening it or reading documentations. Well, not every time this is possible but again this should be the goal of any database modeler. Well, I no way encourage the name of the tables to be too long like ‘ContainsDetailsofNewInvoices’. May be the name of the table should be ‘Invoices’ and table should contain a column with New/Processed bit filed to indicate if the invoice is processed or not (if necessary). Coming back to original story, the database had several tables of which the name were changed. Story Continues… To continue the story let me take simple example. There was a table with the name  ’ReceivedInvoices’, it was changed to new name as ‘TblInvoices’. As per their new naming standard they had to prefix every talbe with the words ‘Tbl’ and prefix every view with the letters ‘Vw’. Personally I do not see any need of the prefix but again, that issue is not here to discuss.  Now after changing the name of the table they faced very interesting situation. They had few indexes on the table which had name of the table. Let us take an example. Old Name of Table: ReceivedInvoice Old Name of Index: Index_ReceivedInvoice1 Here is the new names New Name of Table: TblInvoices New Name of Index: ??? Well, their dilemma was what should be the new naming convention of the Indexes. Here is a quick proposal of the Index naming convention. Do let me know your opinion. If Index is Primary Clustered Index: PK_TableName If Index is  Non-clustered Index: IX_TableName_ColumnName1_ColumnName2… If Index is Unique Non-clustered Index: UX_TableName_ColumnName1_ColumnName2… If Index is Columnstore Non-clustered Index: CL_TableName Here ColumnName is the column on which index is created. As there can be only one Primary Key Index and Columnstore Index per table, they do not require ColumnName in the name of the index. The purpose of this new naming convention is to increase readability. When any user come across this index, without opening their properties or definition, user can will know the details of the index. T-SQL script to Rename Indexes Here is quick T-SQL script to rename Indexes EXEC sp_rename N'SchemaName.TableName.IndexName', N'New_IndexName', N'INDEX'; GO Your Contribute Please Well, the organization has already defined above four guidelines, personally I follow very similar guidelines too. I have seen many variations like adding prefixes CL for Clustered Index and NCL for Non-clustered Index. I have often seen many not using UX prefix for Unique Index but rather use generic IX prefix only. Now do you think if they have missed anything in the coding standard. Is NCI and CI prefixed required to additionally describe the index names. I have once received suggestion to even add fill factor in the index name – which I do not recommend at all. What do you think should be ideal name of the index, so it explains all the most important properties? Additionally, you are welcome to vote if you believe changing the name of index is just waste of time and energy.  Note: The purpose of the blog post is to encourage all to participate with their ideas. I will write follow up blog posts in future compiling all the suggestions. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Index, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQL SERVER – Monitoring SQL Server Database Transaction Log Space Growth – DBCC SQLPERF(logspace) – Puzzle for You

  - by pinaldave

  First of all – if you are going to say this is very old subject, I agree this is very (very) old subject. I believe in earlier time we used to have this only option to monitor Log Space. As new version of SQL Server released we all equipped with DMV, Performance Counters, Extended Events and much more new enhancements. However, during all this year, I have always used DBCC SQLPERF(logspace) to get the details of the logs. It may be because when I started my career I remember this command and it did what I wanted all the time. Recently I have received interesting question and I thought, I should request your help. However, before I request your help, let us see traditional usage of DBCC SQLPERF(logspace). Every time I have to get the details of the log I ran following script. Additionally, I liked to store the details of the when the log file snapshot was taken as well so I can go back and know the status log file growth. This gives me a fair estimation when the log file was growing. CREATE TABLE dbo.logSpaceUsage ( id INT IDENTITY (1,1), logDate DATETIME DEFAULT GETDATE(), databaseName SYSNAME, logSize DECIMAL(18,5), logSpaceUsed DECIMAL(18,5), [status] INT ) GO INSERT INTO dbo.logSpaceUsage (databaseName, logSize, logSpaceUsed, [status]) EXEC ('DBCC SQLPERF(logspace)') GO SELECT * FROM dbo.logSpaceUsage GO I used to record the details of log file growth every hour of the day and then we used to plot charts using reporting services (and excel in much earlier times). Well, if you look at the script above it is very simple script. Now here is the puzzle for you. Puzzle 1: Write a script based on a table which gives you the time period when there was highest growth based on the data stored in the table. Puzzle 2: Write a script based on a table which gives you the amount of the log file growth from the beginning of the table to the latest recording of the data. You may have to run above script at some interval to get the various data samples of the log file to answer above puzzles. To make things simple, I am giving you sample script with expected answers listed below for both of the puzzle. Here is the sample query for puzzle: -- This is sample query for puzzle CREATE TABLE dbo.logSpaceUsage ( id INT IDENTITY (1,1), logDate DATETIME DEFAULT GETDATE(), databaseName SYSNAME, logSize DECIMAL(18,5), logSpaceUsed DECIMAL(18,5), [status] INT ) GO INSERT INTO dbo.logSpaceUsage (databaseName, logDate, logSize, logSpaceUsed, [status]) SELECT 'SampleDB1', '2012-07-01 7:00:00.000', 5, 10, 0 UNION ALL SELECT 'SampleDB1', '2012-07-01 9:00:00.000', 16, 10, 0 UNION ALL SELECT 'SampleDB1', '2012-07-01 11:00:00.000', 9, 10, 0 UNION ALL SELECT 'SampleDB1', '2012-07-01 14:00:00.000', 18, 10, 0 UNION ALL SELECT 'SampleDB3', '2012-06-01 7:00:00.000', 5, 10, 0 UNION ALL SELECT 'SampleDB3', '2012-06-04 7:00:00.000', 15, 10, 0 UNION ALL SELECT 'SampleDB3', '2012-06-09 7:00:00.000', 25, 10, 0 GO Expected Result of Puzzle 1 You will notice that there are two entries for database SampleDB3 as there were two instances of the log file grows with the same value. Expected Result of Puzzle 2 Well, please a comment with valid answer and I will post valid answers with due credit next week. Not to mention that winners will get a surprise gift from me. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: DBCC

  Read the article

• SQL SERVER – Asynchronous Update and Timestamp – Check if Row Values are Changed Since Last Retrieve

  - by pinaldave

  Here is the question received just this morning. “Pinal, Our application is much different than other application you might have come across. In simple words, I would like to call it Asynchronous Updated Application. We need your quick opinion about one of the situation which we are facing. From business side: We have bidding system (similar to eBay but not exactly) and where multiple parties bid on one item, during the last few minutes of bidding many parties try to bid at the same time with the same price. When they hit submit, we would like to check if the original data which they retrieved is changed or not. If the original data which they have retrieved is the same, we will accept their new proposed price. If original data are changed, they will have to resubmit the data with new price. From technical side: We have a row which we retrieve in our application. Multiple users are retrieving the same row. Some of the users will update the value of the row and submit. However, only the very first user should be allowed to update the row and remaining all the users will have to re-fetch the row and updated it once again. We do not want to lock any record as that will create other problems. Do you have any solution for this kind of situation?” Fantastic Question. I believe there is good chance that we can use timestamp datatype in this kind of application. Before we continue let us see following simple example. USE tempdb GO CREATE TABLE SampleTable (ID INT, Col1 VARCHAR(100), TimeStampCol TIMESTAMP) GO INSERT INTO SampleTable (ID, Col1) VALUES (1, 'FirstVal') GO SELECT ID, Col1, TimeStampCol FROM SampleTable st GO UPDATE SampleTable SET Col1 = 'NextValue' GO SELECT ID, Col1, TimeStampCol FROM SampleTable st GO DROP TABLE SampleTable GO Now let us see the resultset. Here is the simple explanation of the scenario. We created a table with simple column with TIMESTAMP datatype. When we inserted a very first value the timestamp was generated. When we updated any value in that row, the timestamp was updated with the new value. Every single time when we update any value in the row, it will generate new timestamp value. Now let us apply this in an original question’s scenario. In that case multiple users are retrieving the same row. Everybody will have the same now same TimeStamp with them. Before any user update any value they should once again retrieve the timestamp from the table and compare with the timestamp they have with them. If both of the timestamp have the same value – the original row has not been updated and we can safely update the row with the new value. After initial update, now the row will contain a new timestamp. Any subsequent update to the same row should also go to the same process of checking the value of the timestamp they have in their memory. In this case, the timestamp from memory will be different from the timestamp in the row. This indicates that row in the table has changed and new updates should not be allowed. I believe timestamp can be very very useful in this kind of scenario. Is there any better alternative? Please leave a comment with the suggestion and I will post on the blog with due credit. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQL SERVER – Solution – User Not Able to See Any User Created Object in Tables – Security and Permissions Issue

  - by pinaldave

  There is an old quote “A Picture is Worth a Thousand Words”. I believe this quote immensely. Quite often I get phone calls that something is not working if I can help. My reaction is in most of the cases, I need to know more, send me exact error or a screenshot. Until and unless I see the error or reproduce the scenario myself I prefer not to comment. Yesterday I got a similar phone call from an old friend, where he was not sure what is going on. Here is what he said. “When I try to connect to SQL Server, it lets me connect just fine as well let me open and explore the database. I noticed that I do not see any user created instances but when my colleague attempts to connect to the server, he is able to explore the database as well see all the user created tables and other objects. Can you help me fix it? “ My immediate reaction was he was facing security and permission issue. However, to make the same recommendation I suggested that he send me a screenshot of his own SSMS and his friend’s SSMS. After carefully looking at both the screenshots, I was very confident about the issue and we were able to resolve the issue. Let us reproduce the same scenario and many there is some learning for us. Issue: User not able to see user created objects First let us see the image of my friend’s SSMS screen. (Recreated on my machine) Now let us see my friend’s colleague SSMS screen. (Recreated on my machine) You can see that my friend could not see the user tables but his colleague was able to do the same for sure. Now I believed it was a permissions issue. Further to this I asked him to send me another image where I can see the various permissions of the user in the database. My friends screen My friends colleagues screen This indeed proved that my friend did not have access to the AdventureWorks database and because of the same he was not able to access the database. He did have public access which means he will have similar rights as guest access. However, their SQL Server had followed my earlier advise on having limited access for guest access, which means he was not able to see any user created objects. My next question was to validate what kind of access my friend’s colleague had. He replied that the colleague is the admin of the server. I suggested that if my friend was suppose to have admin access to the database, he should request of having admin access to his colleague. My friend promptly asked for the same to his colleague and on following screen he added him as an admin. You can do the same using following T-SQL script as well. USE [AdventureWorks2012] GO ALTER ROLE [db_owner] ADD MEMBER [testguest] GO Once my friend was admin he was able to access all the user objects just like he was expecting. Please note, this complete exercise was done on a development server. One should not play around with security on live or production server. Security is such an issue, which should be left with only senior administrator of the server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQL SERVER – Configuring Interactive Cleansing Suggestion Min Score for Suggestions in Data Quality Services (DQS) – Sensitivity of Suggestion

  - by pinaldave

  Earlier I talked about what kind of questions, I do not like when I get asked. Today we will go over the question which I like when I get asked the same. One of the reader practices various steps in my earlier blog post Step by Step Guide to Beginning Data Quality Services in SQL Server 2012 – Introduction to DQS. While reading the blog post he noticed that Data Quality Services is not providing very helpful suggestions. He wrote an email to me about it. Let us go over his email. “Pinal, I noticed in one of your images that DQS is not providing very helpful suggestions. First of all DQS should be able to make intelligent guesses and make the necessary correction by itself. If it cannot do the same, in that case, it should give us intelligent suggestions but in the image included here, I see the suggestions are not there as well. Why is it so? Would you please tell me how to increase the numbers of suggestion? I do understand this may not be preferable solution in many case but all the business cases go on it depends. There are cases when the high sensitivity required and there are cases when higher sensitivities are not required. I would like to seek your help here. –Sriram MD” This is indeed a great question. I see that Sriram understands that every system is different and every application has a different need. I will not have to tell him this most important concept. The question is about how to change the sensitivity of suggestions for correction in DQS. Well, this option is available under the configuration tab in the DQS client. Once you click on Configuration you will see the following screen. Click the Tab of General Settings. You will see the section of Interactive Cleansing. Under this second there is the first option of “Min score for suggestions”. As this is set to 0.7 every suggestion which matches 0.7 probabilities or higher probability are displayed under the suggestion tab. You can see in the following image that there is no suggestion as the min score for suggestions is set to 0.7 and there is no record which qualifies to that much confidence. Now let us change the value of Min Score for suggestion to 0.5. The lower value increased the confidence of DQS to give further suggestion to values which are over 0.5. However, in our case the suggestions which it provides are also accurate. This may not be true for your sample. Every sample is different so you should manually review it before approving them. I guess, this is a simple blog post to demonstrate how to change the confidence value for the suggestions which Data Quality Services provides. Use this feature with care and always tune it according to your datasets and record diversity. Reference: Pinal Dave (http://blog.SQLAuthority.com)       Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Data Quality Services, DQS

  Read the article

• SQL SERVER – Finding Different ColumnName From Almost Identitical Tables

  - by pinaldave

  I have mentioned earlier on this blog that I love social media – Facebook and Twitter. I receive so many interesting questions that sometimes I wonder how come I never faced them in my real life scenario. Well, let us see one of the similar situation. Here is one of the questions which I received on my social media handle. “Pinal, I have a large database. I did not develop this database but I have inherited this database. In our database we have many tables but all the tables are in pairs. We have one archive table and one current table. Now here is interesting situation. For a while due to some reason our organization has stopped paying attention to archive data. We did not archive anything for a while. If this was not enough we  even changed the schema of current table but did not change the corresponding archive table. This is now becoming a huge huge problem. We know for sure that in current table we have added few column but we do not know which ones. Is there any way we can figure out what are the new column added in the current table and does not exist in the archive tables? We cannot use any third party tool. Would you please guide us?” Well here is the interesting example of how we can use sys.column catalogue views and get the details of the newly added column. I have previously written about EXCEPT over here which is very similar to MINUS of Oracle. In following example we are going to create two tables. One of the tables has extra column. In our resultset we will get the name of the extra column as we are comparing the catalogue view of the column name. USE AdventureWorks2012 GO CREATE TABLE ArchiveTable (ID INT, Col1 VARCHAR(10), Col2 VARCHAR(100), Col3 VARCHAR(100)); CREATE TABLE CurrentTable (ID INT, Col1 VARCHAR(10), Col2 VARCHAR(100), Col3 VARCHAR(100), ExtraCol INT); GO -- Columns in ArchiveTable but not in CurrentTable SELECT name ColumnName FROM sys.columns WHERE OBJECT_NAME(OBJECT_ID) = 'ArchiveTable' EXCEPT SELECT name ColumnName FROM sys.columns WHERE OBJECT_NAME(OBJECT_ID) = 'CurrentTable' GO -- Columns in CurrentTable but not in ArchiveTable SELECT name ColumnName FROM sys.columns WHERE OBJECT_NAME(OBJECT_ID) = 'CurrentTable' EXCEPT SELECT name ColumnName FROM sys.columns WHERE OBJECT_NAME(OBJECT_ID) = 'ArchiveTable' GO DROP TABLE ArchiveTable; DROP TABLE CurrentTable; GO The above query will return us following result. I hope this solves the problems. It is not the most elegant solution ever possible but it works. Here is the puzzle back to you – what native T-SQL solution would you have provided in this situation? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL System Table, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQL SERVER – Last Two Days to Get FREE Book – Joes 2 Pros Certification 70-433

  - by pinaldave

  Earlier this week we announced that we will be giving away FREE SQL Wait Stats book to everybody who will get SQL Server Joes 2 Pros Combo Kit. We had a fantastic response to the contest. We got an overwhelming response to the offer. We knew there would be a great response but we want to honestly say thank you to all of you for making it happen. Rick and I want to make sure that we express our special thanks to all of you who are reading our books. The offer is still on and there are two more days to avail this offer. We want to make sure that everybody who buys our most selling combo kits, we will send our other most popular SQL Wait Stats book. Please read all the details of the offer here. The books are great resources for anyone who wants to learn SQL Server from fundamentals and eventually go on the certification path of 70-433. Exam 70-433 contains following important subject and the book covers the subject of fundamental. If you are taking the exam or not taking the exam – this book is for every SQL Developer to learn the subject from fundamentals.  Create and alter tables. Create and alter views. Create and alter indexes. Create and modify constraints. Implement data types. Implement partitioning solutions. Create and alter stored procedures. Create and alter user-defined functions (UDFs). Create and alter DML triggers. Create and alter DDL triggers. Create and deploy CLR-based objects. Implement error handling. Manage transactions. Query data by using SELECT statements. Modify data by using INSERT, UPDATE, and DELETE statements. Return data by using the OUTPUT clause. Modify data by using MERGE statements. Implement aggregate queries. Combine datasets. INTERSECT, EXCEPT Implement subqueries. Implement CTE (common table expression) queries. Apply ranking functions. Control execution plans. Manage international considerations. Integrate Database Mail. Implement full-text search. Implement scripts by using Windows PowerShell and SQL Server Management Objects (SMOs). Implement Service Broker solutions. Track data changes. Data capture Retrieve relational data as XML. Transform XML data into relational data. Manage XML data. Capture execution plans. Collect output from the Database Engine Tuning Advisor. Collect information from system metadata. Availability of Book USA - Amazon | India - Flipkart | Indiaplaza Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQLAuthority News – Advantages of Distance Learning

  - by Pinal Dave

  Distance education is extremely popular – almost overnight, it seems.  Almost everyone has taken an online course, or knows someone who has, or is considering joining an online school.  There are many advantages and disadvantages to attending an online school – but the same can be said of attending a physical school!  Let’s take a look at the top reasons to use distance education. 1) Flexibility.  Physical universities are usually willing to make some concessions to student – like night classes, study hours, and online networks.  However, nothing is going to beat the flexibility of distance education.  You can attend classes and take notes anytime, anywhere, wearing anything you’d like! 2) Affordability.  We don’t need to get into hard numbers to understand how an expensive university can be.  Students are taking on more and more debt just to get an education.  Many of these fees pay for room, board, and facilities.   Distance education cuts out all these costs, and makes attending school much more affordable for the average student. 3) Try before you buy.  Did you know that the average college student changes his or her major 10 times before they graduate?  You can imagine that this kind of indecision plays a huge part in WHEN you graduate – not being able to make up your mind can cost you big bucks if you have to stay in school for extra years!  Distance education allows you to take different classes from a wide range of disciplines.  Do you want to study forensic science or English literature?  Now you don’t have to pay for classes you can’t afford just to find out. 4) Pace yourself.  Some students struggle in a traditional classroom setting – classes can be taught too fast, too slow, or there are too many distractions.  Distance education allows mature students to set the pace themselves.  They can rewatch lectures they didn’t catch the first time, or go through classes quickly if they are already familiar with the material – cutting out the chance of burning out or getting bored. 5) Lifelong learning.  Maybe you already have a degree, but would like to learn more about your field, or a related field, or maybe even about something completely unrelated – just because you are curious!  Distance education allows you to learn whatever you want ,whenever you want (and yes, wearing anything you’d like!). 6) Attend whatever college you want.  Because of the popularity of distance education, physical campuses are getting in on the game by offering online courses – often just uploaded versions of classes already taught at their campus.  Ever wanted to attend Harvard, but knew you couldn’t get in?  Take a class online!  Of course, you probably should not attempt to lie and say you have a Harvard degree, but Ivy League colleges are prestigious because they are the best in their field – take advantage of the best by taking an online course! I am a big believer in continuing education, whether it is online courses, returning to school, or even take informal classes online.  Distance education can be a great way to accomplish these goals and become a lifelong learner. My friends at provides training through virtual classrooms for students who want to avoid travelling. Distance learning course allows IT aspirants to connect with trainers using the internet.  I encourage everyone to check it out! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

  Read the article

• SQL SERVER – Importance of User Without Login

  - by pinaldave

  Some questions are very open ended and it is very hard to come up with exact requirements. Here is one question I was asked in recent User Group Meeting. Question: “In recent version of SQL Server we can create user without login. What is the use of it?” Great question indeed. Let me first attempt to answer this question but after reading my answer I need your help. I want you to help him as well with adding more value to it. Answer: Let us visualize a scenario. An application has lots of different operations and many of them are very sensitive operations. The common practice was to do give application specific role which has more permissions and access level. When a regular user login (not system admin), he/she might have very restrictive permissions. The application itself had a user name and password which means applications can directly login into the database and perform the operation. Developers were well aware of the username and password as it was embedded in the application. When developer leaves the organization or when the password was changed, the part of the application had to be changed where the same username and passwords were used. Additionally, developers were able to use the same username and password and login directly to the same application. In earlier version of SQL Server there were application roles. The same is later on replaced by “User without Login”. Now let us recreate the above scenario using this new “User without Login”. In this case, User will have to login using their own credentials into SQL Server. This means that the user who is logged in will have his/her own username and password. Once the login is done in SQL Server, the user will be able to use the application. Now the database should have another User without Login which has all the necessary permissions and rights to execute various operations. Now, Application will be able to execute the script by impersonating “user without login – with more permissions”. Here there is assumed that user login does not have enough permissions and another user (without login) there are more rights. If a user knows how the application is using the database and their various operations, he can switch the context to user without login making him enable for doing further modification. Make sure to explicitly DENY view definition permission on the database. This will make things further difficult for user as he will have to know exact details to get additional permissions. If a user is System Admin all the details which I just mentioned in above three paragraphs does not apply as admin always have access to everything. Additionally, the method describes above is just one of the architecture and if someone is attempting to damage the system, they will still be able to figure out a workaround. You will have to put further auditing and policy based management to prevent such incidents and accidents. I guess this is my answer. I read it multiple times but I still feel that I am missing something. There should be more to this concept than what I have just described. I have merely described one scenario but there will be many more scenarios where this situation will be useful. Now is your turn to help – please leave a comment with the additional suggestion where exactly “User without Login” will be useful as well did I miss anything when I described above scenario. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >