Search Results

Search found 67318 results on 2693 pages for 'windows boot manager'.

Page 40/2693 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• Computer Won't Boot Properly, unless in safe mode?

  - by Mr_CryptoPrime

  I bought a computer today and booted it up, but when I did I only got a blank screen. I checked to make sure it wasn't the monitor by connecting it to my old computer...it worked. I then tried connecting my monitor to both DVI ports and found that the bottom one did work. However, now it just boots up and says "loading windows" and then when the login screen is suppose to come up the screen just goes blank and monitor says "no input, check cord" (or something like that). I tried reinstalling windows and then I was able to log on normally. I used the CD's and reinstalled all the drivers, then rebooted...now I am stuck right back where I started. I tried taking out the RAM and inserting into different slots, that didn't fix anything. I was able to boot up into windows using safe-mode. I suspected that my ATI Radeon 6950 was the issue and downloaded the drivers, but I can't install them on safe-mode. Someone said to install C++ distr. and I tried doing that to fix driver installation problem of "failed to load detection driver" but it wouldn't let me do that either. Please someone help me, I don't want to have to deal with the evil redtape of sending it back to get a replacement! My computer: -Content--text-_-"http://www.newegg.com/Product/Product.aspx?Item=N82E16883229236&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel--Content--text-_- Driver detection problem: http://www.hardwareheaven.com/hardwareheaven-tools-discussion/174912-failed-load-detection-driver-installation-error.html Driver download page: http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#1 I am using windows 7. Thanks again.

  Read the article

• Computer not finding hard drives on boot -sometimes-

  - by todd.pund

  Computer specs: Mobo: Gigabyte ultradurable 3 - GA-970A-UD3 Processor: First gen I7 3.2GHZ Ram: 8GB Kingston DDR3 1066 Video Card: EVGA NVidia GTX 460 1GB Hard Drive: 500MB 7200rpm x2 (can't remember brand, sorry I'm at work.) Last week my developer preview for Windows 8 ran out so I put my copy of windows 7 back on the computer. The computer at that point started suffering from frequent freezing and crashing. When I rebooted the computer sometimes it wouldn't find the system HD at all. When I looked at the post screen it seemed to show that it wasn't finding either of the HDs. Then yesterday when turning on the computer I just got GRUB as a message (not a GRUB prompt, just GRUB) I haven't had a dual boot of Linux for at least a year. I loaded windows 7 recovery console from the disk and ran: bootrec /fixboot bootrec /fixmbr Which did not help. At that point I just installed Ubuntu 13.04 over the windows 7 install and still received the GRUB post. I went into the BIOS and switched the Hard Drive priorities and then it loaded into Ubuntu fine. For several days everything was just hunky dory until I installed the Ubuntu version of Steam, install Portal and tried to run it. At that point the computer froze and after hard rebooting couldn't find the hard disks again. Then after restarting the system it loaded up fine again and no issues since. (I have not tried to launch portal again). My next thought is to remove the system hard drive and try to use the secondary as the master to see if the primary HD is bad. I'm sorry if this has been confusing, I'll answer any questions I can. Any thoughts?

  Read the article

• Repair Windows 2008 boot

  - by aksamit

  I have been caught in a loop where I can't boot up Windows Server 2008. When the OS starts to boot I am presented two options: Launch Startup Repair (recommended) Start Windows Normally No matter what option is chosen I end up with a black screen stating "Windows is loading files..." which takes approx 15 minutes until "System Recovery" is started. I try to run the "Startup Repair" but it reports the following error: Problem Event Name: StartupRepairOffline Problem Signature 01: 0.0.0.0 Problem Signature 02: 0.0.0.0 Problem Signature 03: unknown OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033 Actually no matter what other options I would try in the System Recovery they would also report some kind of error. Some other logging I have been able to extract: Diagnosis and repair details: Number of repair attempts: 1 Session details System Disk = Windows directory = AutoChk Run = 0 Number of root causes = 1 Test Performed: Name: System disk test Result: Completed successfully. Error code = 0x0 Root cause found: A hard disk could not be found. If a hard disk is installed, it is not responding. So it is actually stating that Harddisk could not be found... which to me seems to be a bit contradictious since the System Recovery just loaded all files from the hard disk it now states it cannot find. Any ideas on what other options I have?

  Read the article

• Computer Won't Boot Properly, unless in safe mode?

  - by Mr_CryptoPrime

  I bought a computer today and booted it up, but when I did I only got a blank screen. I checked to make sure it wasn't the monitor by connecting it to my old computer...it worked. I then tried connecting my monitor to both DVI ports and found that the bottom one did work. However, now it just boots up and says "loading windows" and then when the login screen is suppose to come up the screen just goes blank and monitor says "no input, check cord" (or something like that). I tried reinstalling windows and then I was able to log on normally. I used the CD's and reinstalled all the drivers, then rebooted...now I am stuck right back where I started. I tried taking out the RAM and inserting into different slots, that didn't fix anything. I was able to boot up into windows using safe-mode. I suspected that my ATI Radeon 6950 was the issue and downloaded the drivers, but I can't install them on safe-mode. Someone said to install C++ distr. and I tried doing that to fix driver installation problem of "failed to load detection driver" but it wouldn't let me do that either. Please someone help me, I don't want to have to deal with the evil redtape of sending it back to get a replacement! My computer: -Content--text-_-"http://www.newegg.com/Product/Product.aspx?Item=N82E16883229236&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel--Content--text-_- Driver detection problem: http://www.hardwareheaven.com/hardwareheaven-tools-discussion/174912-failed-load-detection-driver-installation-error.html Driver download page: http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#1 I am using windows 7. Thanks again.

  Read the article

• Multiple Homed Windows 2008 Server / Windows 7 Client

  - by Daniel Scott

  I have a small Windows 2008 network, with some Windows 7 clients. The clients are both laptops with docking stations and I would like them to communicate with the Windows 2008 server (for filesharing) through the wired network whilst they're docked. Internet connectivity for all machines (clients and server) is via a Wireless LAN, so the wireless adapter in the Windows 7 clients stays active while they're docked. When the laptops are un-docked, it would be nice to still be able to contact the windows 2008 server for print sharing (and slower file sharing) - hence the server also being on the wireless LAN. The windows 2008 server is running Active Directory, DHCP and DNS. It controls DHCP leases on the wired network and holds the DNS records for "myserver.mycompany.local", which is what the filesharing clients connect to. Ideally I'd like the DNS records to return the wired IP first so that this is the address that the laptops will attempt initially - but there doesn't seem to be a way to do that? At present the server's IP on the wireless LAN comes out of an nslookup above the wired Lan IP. The multi-homing works perfectly - but in the wrong order! Switch on the wireless lan and ping myserver and it goes to the wireless IP. Disable the wireless on the client and do the same ping again and after a couple of seconds it starts pinging the wired address. Does anyone have any suggestions on how to make this work in a predictable order? - or even if it can work. Alternative 1? If it can't work, then would this work: Remove the wireless adapter from the server, put a wireless router/bridge on the wired network (set up to route to/from the wireless LAN's subnet), then configure the clients with two routes to the (now) single IP of the server with metrics favouring direct communication over the wired LAN first? Alternative 2? Should I instead single-home the laptops so all of their connectivity is via the wired-LAN while they're docked? (and route via the windows 2008 server - or a dedicated wireless bridge/router)? My concern here is that I'd like undocking to be seamless - and if the clients are in the middle of downloading something from the internet I wouldn't want whatever they're doing interupted as they switch IP addresses onto the Wireless network. Perhaps this isn't the case and I'm concerned over nothing? Any thoughts? :) UPDATE I seem to have cracked it (at least DNS entries come out in the order I hope for - and pinging the server with various combinations of wired, wireless and both interfaces enabled uses the IP I want) ... I set the binding order of the NICs on the Server (which is acting as Domain Controller, DHCP and DNS server) so that the Wired NIC is before the Wireless adapter. (Start -- type "Network Interfaces" -- Select "View Network Connections" -- Press Alt to show classic dropdown menus -- Advanced -- Advanced Settings) Now, an nslookup (from the client) of the server's hostname returns the Wired IP first, followed by the Wireless IP. The wired IP now seems to be used whenever it's contactable. Incidentally, the metrics on the wired and wireless routes (on the client) also favour the wired LAN (based on Windows' automatically assigned metrics) - but this was always the case, even when I was having trouble getting the wired IP to be "favoured". I'm not entirely sure if this is coincidence - or if a DNS server running on Windows, handing back IP addresses for itself does actually take the binding order of it's own network interfaces into account? It would be interesting to hear from someone who can confirm or deny that (or confirm that the binding order on the server plays a role for some other reason?)

  Read the article

• The Windows Azure Software Development Kit (SDK) and the Windows Azure Training Kit (WATK)

  - by BuckWoody

  Windows Azure is a platform that allows you to write software, run software, or use software that we've already written. We provide lots of resources to help you do that - many can be found right here in this blog series. There are two primary resources you can use, and it's important to understand what they are and what they do. The Windows Azure Software Development Kit (SDK) Actually, this isn't one resource. We have SDK's for multiple development environments, such as Visual Studio and also Eclipse, along with SDK's for iOS, Android and other environments. Windows Azure is a "back end", so almost any technology or front end system can use it to solve a problem. The SDK's are primarily for development. In the case of Visual Studio, you'll get a runtime environment for Windows Azure which allows you to develop, test and even run code all locally - you do not have to be connected to Windows Azure at all, until you're ready to deploy. You'll also get a few samples and codeblocks, along with all of the libraries you need to code with Windows Azure in .NET, PHP, Ruby, Java and more. The SDK is updated frequently, so check this location to find the latest for your environment and language - just click the bar that corresponds to what you want: http://www.windowsazure.com/en-us/develop/downloads/ The Windows Azure Training Kit (WATK) Whether you're writing code, using Windows Azure Virtual Machines (VM's) or working with Hadoop, you can use the WATK to get examples, code, PowerShell scripts, PowerPoint decks, training videos and much more. This should be your second download after the SDK. This is all of the training you need to get started, and even beyond. The WATK is updated frequently - and you can find the latest one here: http://www.windowsazure.com/en-us/develop/net/other-resources/training-kit/     There are many other resources - again, check the http://windowsazure.com site, the community newsletter (which introduces the latest features), and my blog for more.

  Read the article

• Windows Server 2008 R2 Server Manager not working -> mmc.exe crashes with System.IO.FileNotFoundException

  - by Aleja_Vigo

  Since some days ago I can't run the Server Manager, it fails like this: Descripción: Stopped working Firma con problemas: Nombre del evento de problema: CLR20r3 Firma del problema 01: mmc.exe Firma del problema 02: 6.1.7600.16385 Firma del problema 03: 4a5bc808 Firma del problema 04: System.Management Firma del problema 05: 2.0.0.0 Firma del problema 06: 4ca2baf0 Firma del problema 07: 32f Firma del problema 08: 12b Firma del problema 09: System.IO.FileNotFoundException Versión del sistema operativo: 6.1.7601.2.1.0.272.7 There are other strange syntoms in the SO: Hyper-V stopped working as well, fails to load any VM information The desktop icons rearrange themselves all the time, and always on boot, after I move them. I use now an app that remembers their position to restore it... Windows Update service dissapeared, along with BITS service, I managed to recover them and installed all updates availables today I'm going nuts looking for information about these errors. Solutions that didn't work: sfc /scannow Doesn't complain about anything All windows updates applied (after recovering missing Windows Update) ServerManager.log: Only one error all the time: Error (Id=0) System.Runtime.InteropServices.COMException (0x800706D9): No hay más extremos disponibles desde el asignador de extremos. (Excepción de HRESULT: 0x800706D9) en Microsoft.Windows.ServerManager.NativeMethods.INetFwPolicy2.IsRuleGroupCurrentlyEnabled(String group) en Microsoft.Windows.ServerManager.DirectResult.GetRemoteManagementEnabled() In english : "There are no more endpoints available from the endpoint mapper" Where could I see which is the infamous file that mmc.exe is looking for in that System.IO.FileNotFoundException?? Please, any light on this would be much appreciated...

  Read the article

• Make windows 7 client compatible with windows 2003 server

  - by caspert

  Hi, I am sysadmin for a small business with 30 clients. We have a server running windows 2003 and all the client-computers run windows XP. Now this is not an important issue, but it would be nice if it worked. My personal (home) computer is running windows 7 RC. When I bring my home-computer to work and log into the network with domain\username it logs me in just fine. Although, approving my profile, letting me into the network, including all network drives and printers, it does not download the profile fully. I do believe it might be getting the roaming profiles. So all my user- items, documents etc. attached to the profile does not show up on Windows 7. Is there any way to make it fully download the profile? as it does with Windows XP.

  Read the article

• Windows 7 power management in Boot Camp mode

  - by qntmfred

  I have a Macbook Pro with Windows 7 installed in Boot Camp. I have serious problems with the power management and not sure why. I have the default Balanced power plan selected. Many times when I close the laptop and leave it for more than just a few minutes, when I open it back up, it does not awake immediately. I end up having to press the power button to get it to wake up. Sometimes this causes it to wake up in Windows mode, sometimes it reboots completely, sometimes the battery has been drained and Windows has to restart. Is this a common problem? Can I fix it?

  Read the article

• Windows 7 boot problem (with colorful blinking smilies)

  - by Ishmael Smyrnow

  I put my computer (Windows 7) to sleep, and a couple hours later, tried to wake it back up, but the monitor wouldn't come back on. I did a hard reset (held power button), but I still couldn't get the monitor to show anything. I plugged it into my laptop, and the monitor works fine. I then swapped out the video card with an older one I have. The monitor came on and started showing the boot process. However, shortly after the Windows 7 animated logo came up, the screen went blank, it made this weird beeping noise, and I seen the strangest thing ever. Small, colorful blocks started to fill my screen, and flash, as if something was loading. Inside of those blocks, were smilies (like the ASCII character kind). This continued for about a minute, then the computer rebooted. It scared the sh!t out of me. I've never had a virus before, and I'm savvy enough to keep myself from one, but I'm wondering if that's what it was. I've been using computers for ages, and never seen anything quite like this. Has anyone ever seen something like this? I'm doing hardware diagnostics before trying to boot into Windows again. Hopefully I can figure this out, but I thought I would consult the SU community while I wait on these results. -- UPDATE -- I did a Memory Diagnostic, which turned up nothing. I also booted into Safe Mode no problem, and scheduled a disk check on both of my drives (I dual boot XP & 7). I was feeling good, and tried putting my regular video card back in, and the monitor won't display anything with it. Also, even though the monitor displays nothing, the system sounds like it's booting up. However, I hear a clicking in one of my hard drives that isn't there with the older video card. Could this be a problem with my hard drive, video card, or PSU? PSU makes sense, except for the fact I've been using the same setup for over a year, and the video card doesn't require it's own power plug thing.

  Read the article

• OSX Dual Boot Snow Leopard and Windows

  - by Abhishek

  Am I able to install Mac OSX Snow Leopard on an x86 certified Apple hardware computer and then dual boot with Windows 7?

  Read the article

• Windows XP won't boot after drive transplant

  - by Nathan

  Hi all, I moved my hard drive from my Lenovo laptop into my Asus Eee PC netbook. When I started the netbook, after POST all I got was a black screen with a cursor in the upper left corner. I thought that the migration should work OK because this was a 32-bit version of Windows XP, and the Atom processor in the Asus should support the x86 instruction set. However, I don't know much about Windows, so maybe this was a dumb thought. I did verify that the BIOS can find the drive. It required major surgery to replace the drive, so any solution requiring me to remove the transplant drive is not going to fly. Keeping in mind that the netbook has no optical drive and that I have no other Windows computers (all my other computers run Linux), is there any way I can fix this problem? Thanks! Nathan

  Read the article

• Boot from VHD with windows7 - bcdedit trouble

  - by Michiel Overeem

  I'm running Windows7 Enterprise, x64 version. I've created a windows7 vhd file with help of the following blog post hanselman blog After that, I've added it to my boot menu with help of another blog post hanselman blog This worked great. After that, i've upgraded my hdd. With help of clonezilla i've copied the old disk to the new disk. Next step was to copy the vhd to another partition. Then i updated the boot menu. However, the step C:\>bcdedit /set {guid} device vhd=[driveletter:]\<directory>\<vhd filename> fails with the message An error has occurred setting the element data. The request is not supported. what is happening?

  Read the article

• Possible to restore Windows Partition disk image?

  - by kd7iwp

  I have a machine that was dual-booting Windows 7 and Ubuntu 12.04. I used the Disks program in Ubuntu to make a disk image of my windows partition which I saved on an external disk. I then reformatted the main drive and installed Ubuntu 12.10. I created a spare partition and restored that Windows disk image to that partition. Is it possible to boot Windows? I have run boot-repair and Grub now gives me both Ubuntu and Windows options but when I select Windows I get only a black screen with blinking cursor. I ran a Windows recovery disk and ran startup repair but still no luck. I also tried running lilo inside Ubuntu but still can't boot Windows. Any other ideas? PS, I'm on a Netbook with no DVD drive so I can't just reinstall Windows though if that is my only option I can borrow a DVD eventually.

  Read the article

• Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

  - by Matt Taylor

  Hello, I recently did a full upgrade of windows 7 on my thinkpad, everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen just before the Windows logo appears, disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this wont boot with battery plugged in is greatly appreciated - i need to take this battery out on the road/trains etc.... Cheers Matt

  Read the article

• Missing autochk program during boot

  - by a sandwhich

  I just resized a windows partition which involved shifting about 160GB to the left. After that it couldn't find the boot like normal so I ran the system repair tool like normal(I resize this partition a lot and each time I have to use the repair disk). But, this time, when I rebooted into the recovered 7 partition, it displayed the windows logo like normal but then flashed up autochk program not found -- skipping autocheck After that being on the screen for about 8 seconds, there was a flash of a bluescreen with white text and it rebooted. I have tried running the repair disk multiple times, but it returns and fixes the same problem each time, and the same thing happens on boot each time. Is there anything I can do to fix this short of reinstalling Windows? I have also ran two chkdsks from my vista partition with no errors reported and when viewing all the files on the drive everything seems to be in place.

  Read the article

• Connecting Windows XP to Windows 7 directly using cable

  - by TPR

  These are the problems I am encountering. XP can access Windows 7, not the other way around (which is fine, because I don't need it the other way currently) File transfer is too slow like 0.031 MB/s even though netperf and netCPS list around 8-9 MB/s. I disabled firewall on both computers. Both are same workgroup. I left homegroup on Windows 7. Windows 7 sees the connection as unidentified network. 10.1.1.2 (XP) and 10.1.1.1 (Windows 7) Subnet mask 255.255.255.0 Default gateway and DNS are empty for both of them. Both computer are connected to internet using wireless (using home network), and both of them are connected to each other using wire! If anybody has any pointers, do let me know. I have no problem doing such setup with both computers being Windows 7. This time one of them is XP though, and that seems to be the problem.

  Read the article

• No option for keeping installed programs when upgrading Windows 7 to Windows 8

  - by Nison Maël

  (Related : How can I upgrade from Windows 7 to Windows 8 and keep my files and applications? ) I'm trying to upgrade my Windows 7 Pro (msdnaa) to Windows 8 Pro (msdnaa). The Windows 8 is the final version (I don't have access to previews on msdnaa anymore). As you can see on the related question accepted answer, Windows 8 should give an option to keep installed programs. But it does not. The only available options are "Keep only personal datas" and "Nothing". Any idea ? I'm running with SP1. I've got two partitions (one of them only contains data of a virtual machine). The two operating systems have the same architecture (64 bits). Screenshot:

  Read the article

• Windows OS's cannot boot on new internal harddrive

  - by Kothari

  I have installed a new internal 500GB hard drive into a Dell Inspiron N4030 and it appears that the installation was entirely successful. The BIOS recognizes the drive and shows the serial number of the hard drive. The problem is that I cannot boot any Windows OS. I have tried XP, Vista, Windows 7 and Windows 8. It displays only a black screen with a blinking cursor. Fedora boots successfully. My old hard drive crashed, but would atleast boot up these OS's before it died. Any help?

  Read the article

• Should my servers boot from VHD?

  - by tony roth

  I've been testing native vhd boot on several servers. It seems to be pretty transparent in terms of deployment and with my seat of the pants testing I have not noticed any difference in performance. The main reason that I want to boot vhd is due to their transportablility between different hardware and to hyper-v servers. the following roles will be installed. dfsr dhcp iis application server dc <- haven't tested this yet but see no reason why it won't work. With the above low impact (in terms of performance) roles do you thing booting from VHD is appropriate. thx

  Read the article

• OS X Dual Boot Snow Leopard and Windows

  - by Abhishek

  Am I able to install Mac OS X Snow Leopard on an x86 certified Apple hardware computer and then dual boot with Windows 7?

  Read the article

• Vista won't boot - just get black screen

  - by DisgruntledGoat

  When I boot into Windows Vista (Ultimate), I just get a black screen (with the mouse visible and working). If I run in safe mode, it seems to pause for a while when loading crcdisk.sys. A lot of research says it could be a problem with the hard drive, but I dual boot Ubuntu and that works fine and I can still see and use the Windows partition absolutely fine from Ubuntu. I tried using the "startup repair" option on the Vista install disk but it didn't detect any problems. I have run chkdsk several times, with this: chkdsk C: /f /r And also drive D (the recycle bin). The first two times it detected and fixed errors on the C drive but now it doesn't detect any errors. Is there anything else that could be causing this problem?

  Read the article

• After upgrading to Mac OS X Lion, I can't boot Windows anymore

  - by J. Pablo Fernández

  I upgraded to Mac OS X Lion and I can't run the installed Windows anymore. It seems the issue is that the Lion installation created extra partitions so the Windows partition has a different number one. It's disk0s4 instead of disk0s3 (if I recall correctly). Searching online found several discussions about it but only one with a proposed solution, https://discussions.apple.com/thread/3199099, essentially: bootrec.exe /FixMbr bootrec.exe /FixBoot bootrec.exe /RebuildBcd which didn't work. bootrec.exe /FixBoot claims that no windows partition has been found.

  Read the article

• Boot time virus scan from USB drive

  - by Tomas Sedovic

  I want to check for viruses on a computer that I suspect may be infected with malware. Its users are running an antivirus, but there's always the risk that something slips past and the way I see it, once the system is infected the antivirus is useless because the malware can hide itself from the AV. I think the best way to go (besides clean reinstall of the OS) would be to have an antivirus running at a boot time from a CD or a USB key. That way, the malware is just lying on the disk and cannot do any of its hide-and-seek stuff (provided the AV comes from an uninfected PC and all that). So, I'm looking for something that: Runs at boot time (off USB key or CD-ROM) Does not touch or require the local OS Discovers malware fairly well (like, Avast, AVG, Norton, whatever -- I think the're all the same anyway) Can handle Windows filesystems (FAT 32, NTFS, WinFS ;-) ) Comes from some sort of trusted source (no Windows Antivirus 2009) I know that this is no silver bullet (nothing is, really*), but I do have a feeling it's more likely to help than doing the scan* within the infected system.

  Read the article

• Server 2008 R2 - Boot disk RAID 1 - migrate to larger disk

  - by William Hooper

  My group inherited several 2008 R2 servers with single 70GB RAID 1 boot/system disks. No other disks in the servers. We need larger boot / system disk. Plan is : to replace one disk with new 500 GB drive wait for resync replace other smaller disk with 2nd 500 GB drive wait for resysnc Now I should have 500 GB RAID 1 with original 70 GB partition Then I would like to extend the 70 GB partition to 200 GB and add D: drive partition with remaining 300 GB Can the above be done using Windows Disk Management and / or Windows DiskPart ?

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >