Search Results

Search found 13955 results on 559 pages for 'easy angel'.

Page 400/559 | < Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >

• How to access files on a drive from an older system, mounted in a new system?

  - by David Thomas

  I've recently built a new system, after a rather large physical injury was sustained by my previous system (a precarious balance, and gravity, were not a happy mix). Surprisingly the /home drive of that system appears to have more-or-less survived the trauma. However... I decided to use a fresh drive for / (and swap) partition(s), and another fresh drive for the new /home. Now that's working, I decided to install the old /home drive (that I had assumed until now would be entirely dead and without capacity for use) into the new system to recover the files and data (so far as is possible). At this point I've run into a snag: I have no idea how to go about this (with Windows it was relatively easy, the new drive would be the latest character of the alphabet, and go from there). With 'disk utility' (System - Administration - Disk Utitlity) I've worked out which drive it is (/dev/sda) but clicking on 'mount' produces an error: 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed ...if it is mounted on / I can't see it. I'm also moderately confused by the disk (device /dev/sda) being referred to as /dev/sdb1. Any and all insights would be incredibly welcome (I've already voted for: Idea #9063: New internal hard drives default automount at Brainstorm). Edited in response to Roland's request for a screenshot of disk utility: Details (so far as I know them): 40GB disk is / and swap, 1.0 TB Samsung is /home 1.0 TB Hitachi is from the old system (and was the old /home drive). Output from sudo fdisk -l pasted below: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bef00 Device Boot Start End Blocks Id System /dev/sda1 1 121601 976760001 83 Linux Disk /dev/sdb: 40.0 GB, 40018599936 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00037652 Device Boot Start End Blocks Id System /dev/sdb1 * 1 4742 38084608 83 Linux /dev/sdb2 4742 4866 993281 5 Extended /dev/sdb5 4742 4866 993280 82 Linux swap / Solaris Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e8d46 Device Boot Start End Blocks Id System /dev/sdc1 1 121602 976760832 83 Linux

  Read the article

• MOSS 2007 WSP Retraction 'Error"

  - by juanlarios

  This one is a quick post , but I thought I would post this information as I could not find anything that helped me on this specific scenario. Please read the entire article before taking action as there are some irreversable or very troublesome routes I caution about! Problem: I had a client trying to retract a WSP from Central Admin and would eventually go to an, 'Error' State. I could not retract it and after looking at event logs I figured it was a problem with security. I tried several accounts, checked the databases to see if there was some issue with readonly databases and nothing was working.   Solution: Delete the solution from central admin! Yes, I said it. With StsAdm , just delete the solution from Central Admin using this command: "C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.exe" -o deletesolution -name "yoursolution.wsp" What has just happened is that Central Admin does not know about the WSP anymore but the feature and any deployed files are still on the server. For whatever reason SharePoint was not able to retract the files as it normally does. Now you can do one of two things, you can add the solution again to central admin and deploy overtop of the deployed files so it overrides them, or simply clean up the files manually. I re-added the solution through stsadm, but then deployed through stsadm using the -force option in the command. This overrides the existing files on the server. If you deploy through Central admin it will tell you you need the -force option that is not offered as part of the UI in central admin. Use the following command: "C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.exe" -o deploysolution -name "YourSolution.wsp" -immediate -allowgacdeployment -force Just to make sure everything was good, I retracted to solution again, and it worked! then I deleted the solution from central admin alltogether. Then I checked the server and noticed all the files that were deployed with the WSP were cleaned up properly. I then re-added the new WSP the client was looking to install (an Updated WSP). Conclusion: I have no idea why it was not able to retract, but I have seen this several times. I don't know if has to do with security of certain accounts. Althought it's anoying at times, it is fairly easy to fix if you have good instructions. Hope it helps you out!   ***WORD OF CAUTION - if you clean up the files manually you might want to uninstall the features through STSADM commands as SharePOint might still recognize the features that were deployed as the WSP. You might not want to get into the mess of deleting files that are still part of activated or installed Features. THis is why I suggest doing what I did.

  Read the article

• June 23, 1983: First Successful Test of the Domain Name System [Geek History]

  - by Jason Fitzpatrick

  Nearly 30 years ago the first Domain Name System (DNS) was tested and it changed the way we interacted with the internet. Nearly impossible to remember number addresses became easy to remember names. Without DNS you’d be browsing a web where numbered addresses pointed to numbered addresses. Google, for example, would look like http://209.85.148.105/ in your browser window. That’s assuming, of course, that a numbers-based web every gained enough traction to be popular enough to spawn a search giant like Google. How did this shift occur and what did we have before DNS? From Wikipedia: The practice of using a name as a simpler, more memorable abstraction of a host’s numerical address on a network dates back to the ARPANET era. Before the DNS was invented in 1983, each computer on the network retrieved a file called HOSTS.TXT from a computer at SRI. The HOSTS.TXT file mapped names to numerical addresses. A hosts file still exists on most modern operating systems by default and generally contains a mapping of the IP address 127.0.0.1 to “localhost”. Many operating systems use name resolution logic that allows the administrator to configure selection priorities for available name resolution methods. The rapid growth of the network made a centrally maintained, hand-crafted HOSTS.TXT file unsustainable; it became necessary to implement a more scalable system capable of automatically disseminating the requisite information. At the request of Jon Postel, Paul Mockapetris invented the Domain Name System in 1983 and wrote the first implementation. The original specifications were published by the Internet Engineering Task Force in RFC 882 and RFC 883, which were superseded in November 1987 by RFC 1034 and RFC 1035.Several additional Request for Comments have proposed various extensions to the core DNS protocols. Over the years it has been refined but the core of the system is essentially the same. When you type “google.com” into your web browser a DNS server is used to resolve that host name to the IP address of 209.85.148.105–making the web human-friendly in the process. Domain Name System History [Wikipedia via Wired] What is a Histogram, and How Can I Use it to Improve My Photos?How To Easily Access Your Home Network From Anywhere With DDNSHow To Recover After Your Email Password Is Compromised

  Read the article

• LDoms and Maintenance Mode

  - by Owen Allen

   I got a few questions about how maintenance mode works with LDoms. "I have a Control Domain that I need to do maintenance on. What does being put in maintenance mode actually do for a Control Domain?" Maintenance mode is what you use when you're going to be shutting a system down, or otherwise tinkering with it, and you don't want Ops Center to generate incidents and notification of incidents. Maintenance mode stops new incidents from being generated, but it doesn't stop polling, or monitoring, the system and it doesn't prevent alerts. "What does maintenance mode do with the guests on a Control Domain?" If you have auto recovery set and the Control Domain is a member of a server pool of eligible systems, putting the Control Domain in maintenance mode automatically migrates guests to an available Control Domain.  When a Control Domain is in maintenance mode, it is not eligible to receive guests and the placement policies for guest creation and for automatic recovery won't select this server as a possible destination. If there isn't a server pool or there aren't any eligible systems in the pool, the guests are shut down. You can select a logical domain from the Assets section to view the Dashboard for the virtual machine and the Automatic Recovery status, either Enabled or Disabled. To change the status, click the action in the Actions pane. "If I have to do maintenance on a system and I do not want to initiate auto-recovery, what do I have to do so that I can manually bring down the Control Domain (and all its Guest domains)?" Use the Disable Automatic Recovery action. "If I put a Control Domain into maintenance mode, does that also put the OS into maintenance mode?" No, just the Control Domain server. You have to put the OS into maintenance mode separately. "Also, is there an easy way to see what assets are in maintenance mode? Can we put assets into, or take them out of, maintenance mode on some sort of group level?" You can create a user-defined group that will automatically include assets in maintenance mode. The docs here explain how to set up these groups. You'll use a group rule that looks like this:

  Read the article

• Implementing the Reactive Manifesto with Azure and AWS

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/31/implementing-the-reactive-manifesto-with-azure-and-aws.aspxMy latest Pluralsight course, Implementing the Reactive Manifesto with Azure and AWS has just been published! I’d planned to do a course on dual-running a messaging-based solution in Azure and AWS for super-high availability and scale, and the Reactive Manifesto encapsulates exactly what I wanted to do. A “reactive” application describes an architecture which is inherently resilient and scalable, being event-driven at the core, and using asynchronous communication between components. In the course, I compare that architecture to a classic n-tier approach, and go on to build out an app which exhibits all the reactive traits: responsive, event-driven, scalable and resilient. I use a suite of technologies which are enablers for all those traits: ASP.NET SignalR for presentation, with server push notifications to the user Messaging in the middle layer for asynchronous communication between presentation and compute Azure Service Bus Queues and Topics AWS Simple Queue Service AWS Simple Notification Service MongoDB at the storage layer for easy HA and scale, with minimal locking under load. Starting with a couple of console apps to demonstrate message sending, I build the solution up over 7 modules, deploying to Azure and AWS and running the app across both clouds concurrently for the whole stack - web servers, messaging infrastructure, message handlers and database servers. I demonstrating failover by killing off bits of infrastructure, and show how a reactive app deployed across two clouds can survive machine failure, data centre failure and even whole cloud failure. The course finishes by configuring auto-scaling in AWS and Azure for the compute and presentation layers, and running a load test with blitz.io. The test pushes masses of load into the app, which is deployed across four data centres in Azure and AWS, and the infrastructure scales up seamlessly to meet the load – the blitz report is pretty impressive: That’s 99.9% success rate for hits to the website, with the potential to serve over 36,000,000 hits per day – all from a few hours’ build time, and a fairly limited set of auto-scale configurations. When the load stops, the infrastructure scales back down again to a minimal set of servers for high availability, so the app doesn’t cost much to host unless it’s getting a lot of traffic. This is my third course for Pluralsight, with Nginx and PHP Fundamentals and Caching in the .NET Stack: Inside-Out released earlier this year. Now that it’s out, I’m starting on the fourth one, which is focused on C#, and should be out by the end of the year.

  Read the article

• Rails - How to use modal form to add object in one model, then reflect that change on main page?

  - by Jim

  I'm working on a Rails app and I've come across a situation where I'm unsure of the cleanest way to proceed. I posted a question on SO with code samples and such - it has received no answers, and the more I think about the problem, the more I think I might be approaching this the wrong way. (See the SO question at http://stackoverflow.com/questions/9521319/how-to-reference-form-when-rendering-partial-from-js-erb-file) So, in more of a generic architecture type question: Right now I have a form where a user can add a new recipe. The form also allows the user to select ingredients (it uses a collection_select which contains Ingredient.all). The catch is - I'd like the user to be able to add a new ingredient on the fly, without leaving the recipe form. Using a hidden div and some jQuery/AJAX, I have a link the user can click to popup a modal form containing ingredients/new.html.erb which is a simple form. When that form is submitted, I call ingredients/create.js.erb to validate the ingredient was saved and hide the modal div. Now I am back to my recipe form, but my collection_select hasn't updated. It seems I have a few choices here: try and re-render the collection_select portion of the form so it grabs a new list of ingredients. This was the method I was attempting when I wrote the SO question. The problem I run into is the partial I use for the collection_select needs the parent form passed in, and when I try and render from the JS file I don't know how to pass it the form object. Reload the recipe form. This works (the collection_select now contains the new ingredient), but the user loses any progress they made on the recipe form. I would need a way to persist the form data - I thought about manually passing the values back and forth, but that is sloppy and there has to be a better way... Try and manually insert the tags using jQuery - this would be simple, but because I'm allowing for multiple ingredients to be added, I can't be certain what ID to target. Now, I can't be the only person to have this issue - so is there an easier way I'm missing? I like option 2 above, but I don't know if there's an easy way to grab the entire params hash as if I had submitted the main recipes form. Hopefully someone can point me in the right direction so I can find an answer to this... If this doesn't make any sense at all, let me know - I can post code samples if you want, but most of the pertinent code is up on the SO question. Thanks!

  Read the article

• What can I do to make sure my code gets maintained in a developer light environment?

  - by asjohnson

  I am a contract data analyst, so I bounce between jobs every 3-6 months, which I find to be a good fit for me, but it leads to some problems when it comes to coding. I mostly do statistics (I've asked a similar question on cross validated, but the answers there are not relevant here), but I have also found out that the business world loves excel and loves copying and pasting the same thing over and over again even more. This led me to learn how to write VBA scripts and then VB.NET programs to automate as many of these reports as I can. I am certain my programs are not the most elegant, but I put a good bit of effort into making sure they work under as many cases as I can test, I add in exceptions and try to code so the program can handle changes in the files that it processes, but there is a limit, if you remove a huge portion of the data, there is a good chance my program is going to trip up, which I accept will inevitably happen. Usually a pretty minor change in the code fixes the problem and I do try and comment my code and make it readable under the assumption that some other person will have to read it some day. My problem is that I generally get put on teams of folks with essentially no experience with programming (like VBA would be a huge stretch for anyone I work directly with). I am wondering what I should be doing as the person that wrote the code to do my best to keep it maintained. I have two approaches in mind (outlined next), but would be very happy to get any advice. Solution 1: Find the more tech savvy coworkers and run them through the programs and what basic changes can be made. Honestly automating excel is about as easy as it can get when it comes to programming, so I feel like I could teach someone the basics of maintaining it pretty quick. Solution 2: Get in touch with the IT department and show them what is going on and maybe they will be able to help. The problem here is that the IT department is constantly swamped (as I'm sure many of you know) and I feel like kind of a jerk for dumping more things on them. I do leave my personal email address with places and am willing to answer quick questions via email, but I view the need for more exhaustive maintenance as something of an inevitability and would like to make sure I do my due diligence to make sure it gets done. I imagine some combination of the two approaches outlined there, but is there any kind of heads up I should give IT? I feel like I would be annoyed if I started getting requests to fix a program that I had never seen from some random guy that is no longer there.

  Read the article

• Visual Studio 2010 Launch Events

  - by Jim Duffy

  Don’t miss out on the opportunity to learn about the new features in Visual Studio 2010. Check out the MSDN Events page and find out when the talented folks of the Developer & Evangelism group will be visiting your city to prove to you that /*Life Runs On Code*/. I’ll be attending the Raleigh event June 2, 2010 from 1:00 - 5:00 PM. North Carolina State University, Jane S. McKimmon Conference Center 1101 Gorman St Raleigh North Carolina 27606 United States From the Raleigh Event page: Event Overview Learn about the rich application platforms that Microsoft® Visual Studio® 2010 supports, including Windows® 7, the Web, SharePoint®, Windows Azure™, SQL®, and Windows® Phone 7 Series. From tighter tester and dev collaboration to new ALM tools, there’s a lot that’s new. Here’s what you can expect: Windows Development with Visual Studio 2010 Visual Studio has always been the best way to build compelling visual solutions for Windows. Visual Studio 2010 continues this trend with great new tooling support for Silverlight 4, WPF, and native development. In this demo heavy session, you’ll see how you can build rich Windows applications with Silverlight 4 using new trusted application features including out-of-browser execution, saving to the file system, and even COM Automation. You’ll also see how you can use the new Task Parallel Library from within a WPF application to take advantage of all those cores in today’s modern computers. Web and Cloud Development with Visual Studio 2010 If you build solutions for the web, then this session is for you. Come see how your existing skills move forward with Visual Studio 2010 both for in-house ASP.NET development and the new frontier of the Cloud. In this session, you’ll see improved designers, new HTML and JavaScript snippets, Web Forms enhancements, and how you can quickly build great web sites using Dynamic Data. You’ll see the changes made to testable web sites with MVC 2.0 and how we’ve integrated JQuery support into the platform. You’ll then see how easy it is to leverage your existing code and move to the cloud with Windows Azure. Windows Phone 7 Developer Tools and Platform Overview This session provides an overview of Visual Studio® 2010 for Windows Phone. Learn about the powerful capabilities of this new application platform and the developer tools experience including basic IDE usage, debugging, packaging, and deployment. This session also shows how you can use Microsoft Expression® Blend™ for Windows Phone to build great Silverlight applications. Have a day. :-|

  Read the article

• Upstart: How does rc job work / order of (contradicting) "start on ..." and "stop on ..." stanzas

  - by Binarus

  Hi, I just can't understand how Upstart's rc job definition in Natty 11.04 works. To illustrate the problem, here is the definition (empty lines and comments are left out): start on runlevel [0123456] stop on runlevel [!$RUNLEVEL] export RUNLEVEL export PREVLEVEL console output env INIT_VERBOSE task exec /etc/init.d/rc $RUNLEVEL Let's suppose we currently are in runlevel 2 and the rc job is stopped (that is exactly the situation after booting my box and logging in via SSH). Now, let's assume that the system switches to runlevel 3, for example due to a command like "telinit 3" given by root. What will happen to the rc job? Obviously, the rc job will be started since it is currently stopped and the event runlevel 3 is matching the start events. But from now on, things are unclear to me: According to the manual $RUNLEVEL evaluates to the new runlevel when the job is started (that means 3 in our example). Therefore, the next stanza "stop on runlevel [!$RUNLEVEL]" translates to "stop on runlevel [!3]"; that means we have a first stanza which will trigger the job, but the second stanza will never stop the job and seems to be useless. Since I know that the Ubuntu / Upstart people won't do useless things, I must be heavily misunderstanding something. I would be grateful for any explanation. While trying to understand this, an additional question came to my mind. If I had contradicting start and stop triggers, for example start on foo stop on foo what would happen? I swear I never will do that, but I am nevertheless very interested in how Upstart handles that on the theoretical level. Thank you very much! Editing the question as a reaction on geekosaur's first answer: I can see the parallelism, but it is not that easy (at least, not to me). Let's assume the job aurrently is still running, and a new runlevel event comes in (of course, the new runlevel is different from the current one). Then, the following should happen: 1) The job is single instance. That means that "start on ..." won't be triggered since the job is currently running; $RUNLEVEL is not touched. 2) "stop on ..." will be triggered since the new runlevel is different from $RUNLEVEL, so the job will be aborted. 3) Now, the job is stopped and waiting. I can't see how it is restarted with the new runlevel. AFAIK, initctl emits events only once, so "start on ..." won't be triggered and the new runlevel won't be entered. I know that I still misunderstanding something, and I am grateful for explanations. Thank you very much!

  Read the article

• Misadventures at Radio Shack

  - by Chris Williams

  While I'm waiting for my Arduino kits to show up, I started reading the Getting Started With Arduino book from O'Reilly (review coming later) and I'm about 40 pages in when I get to a parts list for one of the first projects. Looks pretty straightforward, and even has Radio Shack part numbers next to almost everything. So on my lunch today, I decided to run out to "The Shack" (seriously, that's their rebranding?) to pick up some basics, like a couple resistors, a breadboard, a momentary switch and a pack of pre-cut jumper wires. I found the resistors without any difficulty, and while they didn't have the exact switch I wanted, it was easy enough to find one that would do. That's where my good luck abruptly ended. I was surprised that I couldn't find a breadboard or any jumper wires, so while I was looking around, a guy came up and asked me if I needed some help. I told him I did, explained what I needed and even gave him the Radio Shack part number for the pack of jumper wires. After a couple minutes he says he can't find anything in the system, which was unfortunate but not the end of the world.  So then I asked him about the breadboard, and he pointed me to some blank circuitboards (which are not the same thing) and I said (nicely) that those weren't breadboards and attempted to explain (again) what I needed, at which point he says to me "I don't even know what the hell you're looking for!" I stood there for a moment and tried to process his words. About that time, another salesperson came up and asked what I was trying to find. I told her I needed a breadboard, and she pointed to the blank circuit boards and said "they're right in front of you..." After seeing the look on my face, she thought for a minute and said... "OH! you mean those white things. We don't have those anymore." I thanked her, set everything down on the counter and left. (I wasn't going to buy only half the stuff I needed.. and I was pretty sure I was never going to be buying ANYTHING at that particular location ever again.) Guess I'll be ordering more stuff online at this point. It's a shame really, because I used to LOVE going to Radio Shack as a kid, and looking through all the cool electronics components and stuff, even if I didnt understand what most of them were at the time. Seems like the only thing they carry in any quantity/variety now is cell phones and random stereo connectors.

  Read the article

• Minimizing Dependencies For GUIs

  - by tuba09

  I've been working on a project, and have been charged with designing the projects GUI front-end. I'm coding in Java and using the Swing toolkit. Usability-wise, the GUI front-end follows all of Nielsen's heuristics. Users can easily get to where they want to go through the click of a button / JComboBox. Essentially, in Swing terms, what happens is their actions drive the creation/deletion of custom panels. The GUI is coming along fine for the most part. However, I have to admit to being utterly dismayed at the tight web of dependencies my code is being smothered in. The main problem that I've encountered, that I haven't been able to fix as of yet, is how to keep a reference to the panels/buttons being changed. I'll give an example: Say there's a button A Say there's a panel B displaying picture C Say there's another picture D (not currently being displayed by panel B) When user clicks A, panel B should remove picture C and display picture D My question is, what's the best way of keeping track of panel B? Since I need a global point of access to panel B, my solution has so far been to just shoehorn it into a static variable, and access it through a series of static getters and setters. And this static variable is usually stored in the reference's original class. I.e. UserPanel has a static variable that stores a reference to itself. Is there an easy, tried-and-true way of dealing with these kinds of situations? Like my GUI works fine, but it is not modular and/or robust at all. To add to this, the dreaded 'cyclical dependencies' issue that's shunned by so many programmers is out here in full effect. I'm fairly new to development and just want to make sure that my code will be fairly extensible and won't cause much of a headache to the next person that decides to get a try at it. I know there's loads of books out there that probably have a nice elegant solution to this, but unfortunately I just don't have the time to leisure read right now. I need something that's quick and dirty. Thanks in advance

  Read the article

• Avoiding Duplicate Content Penalties on a Corporate/Franchise website

  - by heath

  My question is really an extension of a previous question that was ported from stackoverflow and closed so I cannot edit it. The basic gist is a regional franchise company has decided to force all independent stores into one website look; they currently all have their own domains and completely different websites. After reading the helpful answers and looking over some links provided, I think my solution is to put a 301 on each franchise store site (acme-store1.com, acme-store2.com, etc) back to the main corporate site (acme.com). All of the company history, product info, etc (about 90% of the entire site) applies to all stores. However, each store should have some exclusive content such as staff, location pictures, exclusive events and promotions, etc. I originally thought that I would simply do something like acme.com/store1/staff, acme.com/store2/staff, etc for the store exclusive content and then acme.com/our-company, for example, would cover all stores. However, I now see two issues that I don't know how to solve. They want to see site stats based on what store site they came from. If a user comes from acme-store1.com, is redirected to acme.com and hits several pages, don't I need to somehow keep that original site in the new url to track each page in that user's session and show they originally came from acme-store1.com? Each store is still independently owned and is essentially still in competition with the other stores, albeit, in less competition than they are with other brands. This is important because each store would like THEIR contact info, links to their social media pages, their mailing list sign-up and customer requests on EVERY page. So if a user originally goes to acme-store1.com and is redirected to acme.com, it still should look to the user that it's all about store 1, even though 90% of the content will be exactly the same as it is in the store 2, store 3 and corporate site. For example, acme.com/our-company would have the same company history, same header/footer/navigation, BUT depending on the original site the user came from, it would display contact and links to THAT store. If someone came directly to the corporate site, it would display their contact and links (they have their own as well). I was considering that all redirects would be to store1.acme.com, store2.acme.com, etc (or acme.com/store1) and then I can dynamically add the contact info and appropriate links based on the subdomain or subfolder. But, then I have to worry about duplicate content penalties because, again, about 90% of the text in these "subdomains" are all the same. For reference, this is a PHP5 site. I've already written a compact framework utilizing templates and mod-rewrite that I've used for other sites. Is this an easy fix that I'm just not grasping? Any suggestions?

  Read the article

• Web Apps vs Web Services: 302s and 401s are not always good Friends

  - by Your DisplayName here!

  It is not very uncommon to have web sites that have web UX and services content. The UX part maybe uses WS-Federation (or some other redirect based mechanism). That means whenever an authorization error occurs (401 status code), this is picked by the corresponding redirect module and turned into a redirect (302) to the login page. All is good. But in services, when you emit a 401, you typically want that status code to travel back to the client agent, so it can do error handling. These two approaches conflict. If you think (like me) that you should separate UX and services into separate apps, you don’t need to read on. Just do it ;) If you need to mix both mechanisms in a single app – here’s how I solved it for a project. I sub classed the redirect module – this was in my case the WIF WS-Federation HTTP module and modified the OnAuthorizationFailed method. In there I check for a special HttpContext item, and if that is present, I suppress the redirect. Otherwise everything works as normal: class ServiceAwareWSFederationAuthenticationModule : WSFederationAuthenticationModule {     protected override void OnAuthorizationFailed(AuthorizationFailedEventArgs e)     {         base.OnAuthorizationFailed(e);         var isService = HttpContext.Current.Items[AdvertiseWcfInHttpPipelineBehavior.DefaultLabel];         if (isService != null)         {             e.RedirectToIdentityProvider = false;         }     } } Now the question is, how do you smuggle that value into the HttpContext. If it is a MVC based web service, that’s easy of course. In the case of WCF, one approach that worked for me was to set it in a service behavior (dispatch message inspector to be exact): public void BeforeSendReply( ref Message reply, object correlationState) {     if (HttpContext.Current != null)     {         HttpContext.Current.Items[DefaultLabel] = true;     } } HTH

  Read the article

• Loading levels from .txt or .XML for XNA

  - by Dave Voyles

  I'm attemptin to add multiple levels to my pong game. I'd like to simply exchange a few elements with each level, nothing crazy. Just the background texture, the color of the AI paddle (the one on the right side), and the music. It seems that the best way to go about this is by utilizing the StreamReader to read and write the files from XML. If there is a better, or more efficient alternative way then I'm all for it. In looking over the XNA Starter Platformer Kit provided by MS it seems that they've done it in this manner as well. I'm perplexed by a few things, however, namely parts within the Level class which aren't commented. /// <summary> /// Iterates over every tile in the structure file and loads its /// appearance and behavior. This method also validates that the /// file is well-formed with a player start point, exit, etc. /// </summary> /// <param name="fileStream"> /// A stream containing the tile data. /// </param> private void LoadTiles(Stream fileStream) { // Load the level and ensure all of the lines are the same length. int width; List<string> lines = new List<string>(); using (StreamReader reader = new StreamReader(fileStream)) { string line = reader.ReadLine(); width = line.Length; while (line != null) { lines.Add(line); if (line.Length != width) throw new Exception(String.Format("The length of line {0} is different from all preceeding lines.", lines.Count)); line = reader.ReadLine(); } } What does width = line.Length mean exactly? I mean I know how it reads the line, but what difference does it make if one line is longer than any of the others? Finally, their levels are simply text files that look like this: .................... .................... .................... .................... .................... .................... .................... .........GGG........ .........###........ .................... ....GGG.......GGG... ....###.......###... .................... .1................X. #################### It can't be that easy..... Can it?

  Read the article

• Mixing Forms and Token Authentication in a single ASP.NET Application

  - by Your DisplayName here!

  I recently had the task to find out how to mix ASP.NET Forms Authentication with WIF’s WS-Federation. The FormsAuth app did already exist, and a new sub-directory of this application should use ADFS for authentication. Minimum changes to the existing application code would be a plus ;) Since the application is using ASP.NET MVC this was quite easy to accomplish – WebForms would be a little harder, but still doable. I will discuss the MVC solution here. To solve this problem, I made the following changes to the standard MVC internet application template: Added WIF’s WSFederationAuthenticationModule and SessionAuthenticationModule to the modules section. Add a WIF configuration section to configure the trust with ADFS. Added a new authorization attribute. This attribute will go on controller that demand ADFS (or STS in general) authentication. The attribute logic is quite simple – it checks for authenticated users – and additionally that the authentication type is set to Federation. If that’s the case all is good, if not, the redirect to the STS will be triggered. public class RequireTokenAuthenticationAttribute : AuthorizeAttribute {     protected override bool AuthorizeCore(HttpContextBase httpContext)     {         if (httpContext.User.Identity.IsAuthenticated &&             httpContext.User.Identity.AuthenticationType.Equals( WIF.AuthenticationTypes.Federation, StringComparison.OrdinalIgnoreCase))         {             return true;         }                     return false;     }     protected override void HandleUnauthorizedRequest(AuthorizationContext filterContext)     {                    // do the redirect to the STS         var message = FederatedAuthentication.WSFederationAuthenticationModule.CreateSignInRequest( "passive", filterContext.HttpContext.Request.RawUrl, false);         filterContext.Result = new RedirectResult(message.RequestUrl);     } } That’s it ;) If you want to know why this works (and a possible gotcha) – read my next post.

  Read the article

• Tools for Enterprise Architects: OmniGraffle for iPad?

  - by pat.shepherd

  Well, I have to admit to being a bit of an Apple fan and, of course, and early adopter of gadgets and technology in general.  So, when FedEx showed up with my iPad 3G last week, I was a kid in a candy store.  One of the apps that my “buy finger” was hovering over for a while (like all of 3 days) was Omnigraffle for the iPad.  I imagined that it would be very cool to use this with a customer’s EA’s to sketch out Business, Application, Information and Technology architectures.  Instead of using the blackboard, this seemed to offer promise as a white-boarding tool with obvious benefits over a traditional white-board.  I figured I’d get a VGA adapter, plug it into the customer’s projector and off we would go with a great JAD tool.  The touch pad approach offered an additional hands-on kind of feel. So, I made the $49.99 purchase + the $29.99 VGA adapter and tried to give it a go.  Well, I was both pleasantly and unpleasantly surprised.  It is both powerful and easy to use.  There are great stencils included for shapes, software icons, Visio shapes, and even UML notation.  There is even a free-hand tool that works well.  I created some diagrams pretty quickly.   The one below was just a test and took all of 10 minuets to do. The only problem was that Onmigraffle does not recognize the VGA output, so I was stopped dead in my tracks, as it were.  My use case was as a collaborative diagramming tool with other architects, though I can still use it off line.  I called Omnigraffle and they said that VGA support is on the feature request list so, hopefully, in a short amount of time, I can use the tool as I envisioned.   Review: Criteria Result Is it fun? Yes Is it Useful? Yes Does it Show Promise? Yes Did the VGA Output Work? No File/diagram Formats PDF, Onmigraffle proprietary, image   Quick Sample:     OmniGraffle for iPad - Products - The Omni Group

  Read the article

• Sweden Azure Group with Michele Laroux Bustamente &amp; Maartin Balliauw Thursday 22nd May

  - by Alan Smith

  Originally posted on: http://geekswithblogs.net/asmith/archive/2014/05/19/156418.aspxSweden Azure Group (SWAG) has the privilege of welcoming Michele Laroux Bustamente and Maartin Balliauw to present sessions at our meeting this Thursday. Michele and Maartin are two of the world’s leading experts in Cloud Computing and Azure, and will be taking time out from their busy schedules to share their ideas with us, and answer any questions. Knowit Stockholm are kindly hosting the event at their offices, and providing food and refreshments. It should be a great evening. You can register for the event here. Azure Q & A - Michele Leroux Bustamante In this interactive Q & A session Michele Leroux Bustamante will be on hand to share her wealth of experience on Azure related issues. If you are new to Azure and wanting some tips to get started, or an experienced developer needing to negotiate the legal and political protocols related to Cloud Computing Michele will have been there, done that, and be willing to share her experiences. This session will be entirely driven by that attendees, so please come prepared with questions. Reducing latency on the web with the Windows Azure CDN – Maarten Balliauw Serving up content on the Internet is something our web sites do daily. But are we doing this in the fastest way possible? How are users in faraway countries experiencing our apps? Why do we have three webservers serving the same content over and over again? In this session, we’ll explore the Windows Azure Content Delivery Network or CDN, a service which makes it easy to serve up blobs, videos and other content from servers close to our users. We’ll explore simple file serving as well as some more advanced, dynamic edge caching scenarios. Michele Leroux Bustamante Michele Leroux Bustamante is CIO at Solliance (solliance.net), cofounder of Snapboard (snapboard.com), and is recognized as a Microsoft Regional Director and MVP. Michele is a thought leader with over 20 years specializing in building scalable and secure end-to-end system design, identity and access management, and cloud computing technologies – for companies of all sizes. In recent years Michele has also helped launch several startup business ventures and has been a mentor to startups in several accelerator programs – providing both technical and business guidance. Michele shares her experiences through presentations and keynotes all over the world, and has been publishing regularly in technology journals. Maarten Balliauw Maarten Balliauw is a Technical Evangelist at JetBrains. His interests are all web: ASP.NET MVC, PHP and Windows Azure. He’s a Microsoft Most Valuable Professional (MVP) for Azure and an ASPInsider. He has published many articles in both PHP and .NET literature such as MSDN magazine and PHP architect. Maarten is a frequent speaker at various national and international events such as MIX (Las Vegas), TechDays, DPC, …

  Read the article

• #SSAS #Tabular Workshop and Community Events in Netherlands and Denmark

  - by Marco Russo (SQLBI)

  Next week I will finally start the roadshow of the SSAS Tabular Workshop, a 2-day seminar about the new BISM Tabular model for Analysis Services that has been introduced in SQL Server 2012. During these roadshows, we always try to arrange some speeches at local community events in the evening - we already defined for Copenhagen, we have some logistic issue in Amsterdam that we're trying to solve. Here is the timetable: Netherlands SSAS Workshop in Amsterdam, NL – April 16-17, 2012 2-day seminar, I and Alberto will be the trainers for this event, register here We're trying to manage a Community event but we still don't have a confirmation, stay tuned        Denmark SSAS Workshop in Copenhagen, DK – April 26-27, 2012 2-day seminar, I and Alberto will be the trainers for this event, register here Community event on April 26, 2012 This event will run in Hellerup, at Microsoft venue All details available here: http://msbip.dk/events/26/msbip-mode-nr-5/ People from Sweden are welcome! Just register to this private group on LinkedIn in order to announce your presence, so we’ll know how many people will attend In community events we’ll deliver two speeches – here are the descriptions: Inside xVelocity (VertiPaq) PowerPivot and BISM Tabular models in Analysis Services share a great columnar-based database engine called xVelocity in-memory analytics engine (VertiPaq). If you want to improve performance and optimize memory used, you have to understand some basic principles about how this engine works, how data is compressed, and how you can design a data model for better optimization. Prepare yourself to change your mind. xVelocity optimization techniques might seem counterintuitive and are absolutely different than OLAP and SQL ones! Choosing between Tabular and Multidimensional You have a new project and you have to make an important decision upfront. Should you use Tabular or Multidimensional? It is not easy to answer, because sometime there is a clear choice, but most of the times both decisions might be correct, at least at the beginning. In this session we’ll help you making an informed decision, correctly evaluating pros and cons of each one according to common scenarios, considering both short-term and long-term consequences of your choice. I hope to meet many people in this first dates. We have many other events coming in May and June, including an online event (for US time zones), and you can also attend our PreCon Day at TechEd US in Orland (PRC06) or TechEd Europe in Amsterdam. I’ll be a good customer for airline companies in the next three months! I’m just sorry that I hadn’t time to write other articles in the last month, but I’m accumulating material that I will need to write down during some flight – stay tuned…

  Read the article

• SharePoint 2010 Hosting :: How to Create an External Content Type SharePoint 2010

  - by mbridge

  In this simple Article trying to show how SharePoint Designer 2010 more the External Content Type to External Database are very easy to create and can be integrated with our SharePoint Portals. You can download SharePoint Designer 2010 here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d88a1505-849b-4587-b854-a7054ee28d66&displaylang=en For this Example I will create a Database in SQL Server and will use SharePoint Designer 2010 to create the connections and use as a mirror from our SharePoint Portal using List and the Database. The first thing we need to do, is connect to SQL Server and create our Database call “Contacts” and add the Table “Contact” with the following fields.  When we create the External Content Type. We  will need to associate the Content Type, in this case i am using the Generic List, then we can create the Connection to the external Data Source. After create the Connection to the Database we can define what Columns we will use and what operations we will add our custom List. For this example i select all Operation they came default. This operation are very important because the Business rules are defined in each operation. After we create the diferent operations we can create the Custom List and define the how will be the Operation and add the Name for our custom List.  If you try to access the New Custom List Call “Custom Contact” you will see we will not have access to the Business Data Connectivity. To Resolve this issue we will need to give Access and permissions to users to the Custom External Content Type BDC connection in the Central administration.  Access to Central Administration Page and select the option “Service Application Tab> Manage Service Application”. There you select the Service “Business Data Connectivity Service” then select “Manage”.  This Option will list all External Content Type, choose the External Content Type we create and select the option “Set Object Permission”, this option will allow to add users to the BDC and manage the permissions to the Custom List.  After the correct permissions are given we can Access to Data on our custom Contact List and start creating new Item and all the other options and operation we define to the same List.  Hope you like this litle Article about connect Database Content to SharePoint Portal using the Externa Content Types and BCS.Thank you.

  Read the article

• A strong component keeps everything together

  - by Justin Paul-Oracle

  Most of the times you implement a WebCenter Content based system, you require some sort of customization. Sometimes these customizations need a Java class or two, or libraries (for example, the JavaMail API), or Database Objects (like new tables, views, indexes, etc). I have seen that libraries and Database Objects are usually put in place using manual steps. This means that the library jar files are copied to one of the common classes directory (set in the Content CLASSPATH variable) and/or the database scripts are executed manually. I have also seen people place the custom Java classes in the common classes directory. While this may seem like an easy solution, think about a scenario where you need to disable or uninstall the component or if you have to upgrade or migrate the system. You have to keep these manual steps documented and execute them every time you encounter the above scenarios. It is very common that some of these manual steps are missed when you have multiple teams and people working on the system. Here are a few points to ponder upon: Place all your custom Java classes within your component. Create a new directory, say ${COMPONENT_DIR}/classes, and place your code there. You can choose to bundle all your classes into a jar or you can place the entire class directory structure. Add a path entry to the Build Settings so that it is bundled with the component when you build it. You also need to update the Custom Class Path and the Custom Class Path Load Order under the Advanced Build Settings. This will ensure that the system CLASSPATH is updated to add this new directory. Create a new component for any new library that you want to add. Add the appropriate path entries to the Build Settings so that it is bundled with the component when you build it. You also need to update the Custom Class Path, Custom Class Path Load Order and/or the Custom Library Path under the Advanced Build Settings. Enter a comma separated list of features that this component will provide. When you create other components that will use the features exposed by this component, make sure that you specify a dependency to this library component by specifying the comma separated list of features in the Advanced Build Settings. The component wizard allows you to create custom install/uninstall Java code. The wizard will create a install filter class when you check the “Has Install” checkbox on the “Install/Uninstall Settings” tab. Consider using this filter class to create database objects when you install the component and drop the objects when you uninstall the component. If you do a lot of custom component development, consider creating a install/uninstall Java class, which can execute queries defined within the component. To sum up, whenever you write a new custom component, make sure that you bundle everything within the component.

  Read the article

• Stuff I learned at Innovate 2011

  - by David Dorf

  After returning from the NRF Innovate 2011 conference, I picked up few nuggets I thought I'd share here.  These thoughts are a bit random, but I hope they're useful nonetheless.Kevin Kelly opened the conference with six verbs that represent the future.  They were Screening, Interacting, Sharing, Accessing, Flowing, and Generating.  It struck me that these are all ways in which we merge the digital and physical worlds.  The internet of things continues to gain momentum.Some buzzwords:  deal economy, subscription commerce, discovery (instead of search), curationThat last one, curation, came up over and over.  Retailers, especially those in fashion, are finding value in helping their customers organize and present their own collections.  Social media has made sharing such collections easy, and mobile lets them take those ideas into the stores.  Mannequins are becoming less relevant.I heard from both HauteLook and Gilt Groupe (flash sale retailers) that a large percentage of their visits come from mobile devices, and most of those are iOS devices.  I find it interesting that even though Android has passed iPhone in units shipped (and will eventually pass iOS as a whole), its still the Apple crowd that leads the way.RadioShack mentioned their Holiday Heroes campaigned was very successful.  They asked their Foursquare users to check-in at a gym, coffee shop, and transportation hub as part of being a hero.  For this feat, customers were awarded a special badge that was worth 20% off at their next store visit. They claim a 3.5x increase in ticket size vs. regular check-in customers, and a 5x increase vs those that don't check-in at all.I also learned of RadioShack's #28 campaign, which is apparently one of the largest Twitter trends ever.  Their partnership with LIVESTRONG has gotten them followers, impressions, and credit for supporting the fight against cancer.The guys at Invodo showed the importance of video to e-commerce.  They gave compelling examples of how video can show customers the value of products better than just words.The highlight of the show was Guy Kawasaki's talk on innovation, which was not only informative but also peppered with humor and personality.  Back in the early days of the internet boom, Guy turned down the CEO position at Yahoo! because the commute was too long.  By his calculation, that was a $2B mistake.There are other good accounts of the conference at the NRF Blog.

  Read the article

• ANTS Memory Profiler 7.0

  - by Sam Abraham

  In the next few lines, I would like to briefly review ANTS Memory Profiler 7.0.  I was honored to be extended the opportunity to review this valuable tool as part of the GeeksWithBlogs influencers Program, a quarterly award providing its recipients access to valuable tools and enabling them with an opportunity to provide a brief write-up reviewing the complimentary tools they receive.   Typical Usage   ANTS Memory Profiler 7.0 is very intuitive and easy to use for any user be it novice or expert. A simple yet comprehensive menu screen enables the selection of the appropriate program type to profile as well as the executable or site for this program.   A typical use case starts with establishing a baseline memory snapshot, which tells us the initial memory cost used by the program under normal or low activity conditions. We would then take a second snapshot after the program has performed an activity which we want to investigate for memory leaks. We can then compare the initial baseline snapshot against the snapshot when the program has completed processing the activity in question to study anomalies in memory that did not get freed-up after the program has completed its performed function. The following are some screenshots outlining the selection of the program to profile (an executable for this demonstration’s purposes).   Figure 1 - Getting Started   Figure 2 - Selecting an Application to Profile     Features and Options   Right after the second snapshot is generated, Memory Profiler gives us immediate access to information on memory fragmentation, size differences between snapshots, unmanaged memory allocation and statistics on the largest classes taking up un-freed memory space.   We would also have the option to itemize objects held in memory grouped by object types within which we can study the instances allocated of each type. Filtering options enable us to quickly narrow object instances we are interested in.   Figure 3 - Easily accessible Execution Memory Information   Figure 4 - Class List   Figure 5 - Instance List   Figure 6-  Retention Graph for a Particular Instance   Conclusion I greatly enjoyed the opportunity to evaluate ANTS Memory Profiler 7.0. The tool's intuitive User Interface design and easily accessible menu options enabled me to quickly identify problem areas where memory was left unfreed in my code.     Tutorials and References  FInd out more About ANTS Memory Profiler 7.0 http://www.red-gate.com/supportcenter/Product?p=ANTS Memory Profiler   Checkout what other reviewers of this valuable tool have already shared: http://geekswithblogs.net/BlackRabbitCoder/archive/2011/03/10/ants-memory-profiler-7.0.aspx http://geekswithblogs.net/mikebmcl/archive/2011/02/28/ants-memory-profiler-7.0-review.aspx

  Read the article

• Why is my laptop so sluggish? Or Damn You Facebook and Twitter! Or All Hail Chrome!

  - by John Conwell

  In the past three weeks, I've noticed that my laptop (dual core 2.1GHz, 2Gb RAM) has become amazingly sluggish.  I only uses for communications and data lookup workflows, so the slowness was tolerable.  But today I finally got fed up with the suckyness and decided to get to the root of the problem (I do have strong performance roots after all). It actually didn't take all that long to figure it out.  About a year ago I converted to Google Chrome (away from FireFox).  One of the great tools Chrome has is a "Task Manager" tool, that gives you Windows Task Manager like details for all the tabs open in the browser (Shift + Esc).  Since every tab runs in its own process, its easy from Task Manager (both Windows or Chrome) to identify and kill a single performance offending tab.  This is unlike IE, where you only get aggregate data about all tabs open.  Anyway, I digress.  Today my laptop sucked.  Windows Task Manager told me that I had two memory hogging Chrome tabs, but couldn't tell me which web page those tabs are showing.  Enter Chrome Task Manager which tells you the page title, along with CPU, memory and network utilization of each tab.  Enter my amazement.  Turns out Facebook was using just shy of half a Gb of RAM.  Half a Gigabyte!  That's 512 Megabytes!524,288 Kilobytes! 536,870,912 Bytes!  Or 4,294,967,296 Bits!  In other words, that's a frackin boat load of memory.  Now consider that Facebook is running on pretty much 96.3% (statistics based on absolutely nothing) of every house hold desktop, laptop, netbook, and mobile device in America, that is pretty horrific! And I wasn't playing any Facebook games like FarmWars or MafiaVille.  I just had my normal, default home page up showing me who just had breakfast, or just got finished with their morning run. I'm sorry...let me say that again...HALF A GIG OF RAM!  That is just unforgivable. I can just see my mom calling me up:  Mom: "John...I think I need a new computer.  Mine is really slow these days" John: "What do you have running?" Mom: "Oh, just Facebook" John: "Ok, close Facebook and tell me how fast your computer feels" Mom: "Well...I don't know how fast it is.  All I do is use Facebook" John: "Ok Mom, I'll send you a new computer by Tuesday" Oh yea...and the other offending web page?  It was Twitter, using a quarter of a Gigabyte. God I love social networks!

  Read the article

• The most dangerous SQL Script in the world!

  - by DrJohn

  In my last blog entry, I outlined how to automate SQL Server database builds from concatenated SQL Scripts. However, I did not mention how I ensure the database is clean before I rebuild it. Clearly a simple DROP/CREATE DATABASE command would suffice; but you may not have permission to execute such commands, especially in a corporate environment controlled by a centralised DBA team. However, you should at least have database owner permissions on the development database so you can actually do your job! Then you can employ my universal "drop all" script which will clear down your database before you run your SQL Scripts to rebuild all the database objects. Why start with a clean database? During the development process, it is all too easy to leave old objects hanging around in the database which can have unforeseen consequences. For example, when you rename a table you may forget to delete the old table and change all the related views to use the new table. Clearly this will mean an end-user querying the views will get the wrong data and your reputation will take a nose dive as a result! Starting with a clean, empty database and then building all your database objects using SQL Scripts using the technique outlined in my previous blog means you know exactly what you have in your database. The database can then be repopulated using SSIS and bingo; you have a data mart "to go". My universal "drop all" SQL Script To ensure you start with a clean database run my universal "drop all" script which you can download from here: 100_drop_all.zip By using the database catalog views, the script finds and drops all of the following database objects: Foreign key relationships Stored procedures Triggers Database triggers Views Tables Functions Partition schemes Partition functions XML Schema Collections Schemas Types Service broker services Service broker queues Service broker contracts Service broker message types SQLCLR assemblies There are two optional sections to the script: drop users and drop roles. You may use these at your peril, particularly as you may well remove your own permissions! Note that the script has a verbose mode which displays the SQL commands it is executing. This can be switched on by setting @debug=1. Running this script against one of the system databases is certainly not recommended! So I advise you to keep a USE database statement at the top of the file. Good luck and be careful!!

  Read the article

• Make the Taskbar Buttons Switch to the Last Active Window in Windows 7

  - by The Geek

  The new Windows 7 taskbar’s Aero Peek feature, with the live thumbnails of every window, is awesome… but sometimes you just want to be able to click the taskbar button and have the last open window show up instead. Here’s a quick hack to make it work better. To better understand the problem, imagine having nine windows of the same type open on your screen, but you are primarily working in just one of the windows at a time. So every time you want to switch back, you have to click the taskbar button, and then choose the one you are using from the list, which can be pretty annoying… Now if you know your Windows 7 shortcuts, you’d know that you can simply hold down the Ctrl key while clicking on the taskbar button, and the last window will show up. In fact, you can keep holding down the Ctrl key and keep clicking, and Windows will cycle through the open windows. It’s a useful shortcut, but hardly something you want to do every single time. Instead, we’ll use a quick registry hack to make the normal click switch to the last open window—if you still want to see the thumbnail list, just hover your mouse over the button for half a second to see the full list. Manual Registry Hack for Last Active Window Open up regedit.exe through the start menu search or run box, and then head down to the following registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced Once you’re there, create a new 32-bit DWORD value on the right hand side, give it the name LastActiveClick, and set the value to 1. Once you are done, it should look something like this: Once you are done, you’ll have to log off and back on, or you can kill Explorer.exe through Task Manager and re-open it. Download the Registry Hack Instead Since you probably don’t feel like registry hacking, we’ve provided you an easy downloadable version. You can simply download the file, extract it, and then double-click on the LastActiveClick.reg file. Once you are done, you’ll have to log off and back on, just like with the manual registry hack. Download LastActiveClick Registry Hack from howtogeek.com Similar Articles Productive Geek Tips Make the Windows 7 Taskbar Work More Like Windows XP or VistaStupid Geek Tricks: Select Multiple Windows on the TaskbarReorganize Your Taskbar Buttons and Tray Icons in XP/VistaKeyboard Ninja: Create a Hotkey to Switch to Your Open Outlook WindowTaskbar Eliminator Does What the Name Implies: Hides Your Windows Taskbar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

  Read the article

< Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >