Search Results

Search found 23265 results on 931 pages for 'justin case'.

Page 400/931 | < Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >

  • Qualcomm Gobi WWAN modem no longer appears in Network Manager

    - by Andy E
    Not sure what happened here. I installed Cinnamon on my Ubuntu 12.10 environment yesterday, rebooted when finished and everything was working fine. I even used my WWAN modem after my fixed line broadband went down. However, after starting my machine this morning and seeing that my fixed line is still having problems (intermittently), I clicked the network applet and my WWAN device wasn't listed. It's not in the main network manager window either. It is still present on the system, however: $ lsusb Bus 001 Device 003: ID 05ca:18b0 Ricoh Co., Ltd Sony Vaio Integrated Webcam Bus 001 Device 004: ID 05c6:9221 Qualcomm, Inc. Gobi Wireless Modem (QDL mode) Bus 002 Device 005: ID 04e8:6865 Samsung Electronics Co., Ltd Bus 002 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub Bus 003 Device 002: ID 147e:1000 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 008 Device 002: ID 044e:3017 Alps Electric Co., Ltd BCM2046 Bluetooth Device Debug output from modem-manager, refers to a device that is blacklisted: modem-manager[10186]: [1355478137.024491] [mm-manager.c:866] device_added(): (tty/ttyUSB0): port's parent device is blacklisted modem-manager[10186]: [1355478137.024607] [mm-manager.c:875] device_added(): (tty/ttyS0): port's parent platform driver is not whitelisted modem-manager[10186]: [1355478137.024700] [mm-manager.c:875] device_added(): (tty/ttyS1): port's parent platform driver is not whitelisted ... I couldn't see anything relevant in the debug output for network-manager, but I've created a paste for it just in case. In /lib/udev/rules.d/77-mm-qdl-device-blacklist.rules, I found the following line that matches the device IDs from the lsusb output: # Generic Gobi QDL device ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9221", ENV{ID_MM_DEVICE_IGNORE}="1" I tried commenting out the second line and restarting network-manager/modem-manager but it didn't help. I've no idea where to go from here, does anyone else have any ideas?

    Read the article

  • Mac Disk-Utility input/output error

    - by Michelle
    a couple of other people have posted about this but my specific problem has not been addressed. For months I have been backing up DVDs and home movies with no problem then all of a sudden I get an "input/output" error. Yes I have cleaned the disks. Actually I have tried 8 different ones - they are not all bad so its obviously my computer. I have done a scan and cleaned up the HD a bit just in case but nothing is helping. I don't want to download other programs since this one works but seems to be having a problem. Any ideas?

    Read the article

  • Getting Xbox Live via a wired network with my laptop that has internet access wirelessly

    - by Alex Franco
    I'm running the latest version (as of yesterday anyways) of Ubuntu Desktop 64bit, but installed on my laptop if it makes a difference. I had Windows 7 preinstalled when i bought it and it worked fine with the wireless from my house and bridging the connection with a LAN to my xbox for Live. Now with Ubuntu I tried the same setup, but I'm unfamiliar with Ubuntu so I didn't get far. Best I got so far is wireless internet on my laptop and a wired connection to the xbox that continually connects and disconnects. Heres my network settings. if theres fields not included its because theyre empty on mine or theyre my MAC address or network password Wireless Network 1 settings: Connect Automatically: Checked. Available to all Users: Checked Wireless: SSID: Franco's Mode: Infrastructure MTU: Automatic IPv4 Settings: Method: Automatic (DHCP) IPv6 Settings: Method: Automatic Wired Network 1: Connect Automatically: Checked Available to all Users: Checked Wired: MTU: Automatic IPv4 Settings: Method: Automatic (DHCP) IPv6 Settings: Method: Automatic Any help would be greatly appreciated. EDIT: 6:26pm It seems to be staying connected now. Doing the Network test on my xbox it pickups the network, but cannot detect any PC. Restarting the Xbox, however, leaves my computer unable to connect bringing up the Wire Network disconnected 'blip' every minute or so again. Before I had restarted the Xbox it said "Connected 100 MB/s". Now it only says "connecting". I did have my computer and xbox on in this Wired Network Disconnected blip cycle for a long period of time so it may have finally connected, just without the ability to detect my laptop. I left for 2 hours or so in the middle of typing up the original question. I finished posting this when i got back and then tried to mess with it a bit again, in case youre wondering why i didnt include this before... I've said too much. Forgive my long-winded fingers :p

    Read the article

  • SQL SERVER – Validating Unique Columnname Across Whole Database

    - by pinaldave
    I sometimes come across very strange requirements and often I do not receive a proper explanation of the same. Here is the one of those examples. Asker: “Our business requirement is when we add new column we want it unique across current database.” Pinal: “Why do you have such requirement?” Asker: “Do you know the solution?” Pinal: “Sure I can come up with the answer but it will help me to come up with an optimal answer if I know the business need.” Asker: “Thanks – what will be the answer in that case.” Pinal: “Honestly I am just curious about the reason why you need your column name to be unique across database.” (Silence) Pinal: “Alright – here is the answer – I guess you do not want to tell me reason.” Option 1: Check if Column Exists in Current Database IF EXISTS (  SELECT * FROM sys.columns WHERE Name = N'NameofColumn') BEGIN SELECT 'Column Exists' -- add other logic END ELSE BEGIN SELECT 'Column Does NOT Exists' -- add other logic END Option 2: Check if Column Exists in Current Database in Specific Table IF EXISTS (  SELECT * FROM sys.columns WHERE Name = N'NameofColumn' AND OBJECT_ID = OBJECT_ID(N'tableName')) BEGIN SELECT 'Column Exists' -- add other logic END ELSE BEGIN SELECT 'Column Does NOT Exists' -- add other logic END I guess user did not want to share the reason why he had a unique requirement of having column name unique across databases. Here is my question back to you – have you faced a similar situation ever where you needed unique column name across a database. If not, can you guess what could be the reason for this kind of requirement?  Additional Reference: SQL SERVER – Query to Find Column From All Tables of Database Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL System Table, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Can't run node.js script on server reboot

    - by webstyle
    I need to listen events on port 3240 and I'm using node.js for that purpose. I need to execute my script with forever tool. I also need to run forever on server reboot. When I run forever glh.js everything works: forever list says there is a running process. But when I'm trying to run forever on server reboot I can't get it working. I've created a file in /etc/init.d with the following content: #!/bin/bash /var/www/yan/data/gitlabhook/runglh.sh &>/var/www/yan/data/gitlabhook/runglh.log When I reboot the server, the output log is the following (the same as when I run it manually via console): info: Forever processing file: glh.js But in this case forever doesn't start a process. forever list outputs: info: No forever processes running

    Read the article

  • BizTalk 2009 - The Community ODBC Adapter: Receive Location

    - by Stuart Brierley
    I have previously talked about the installation of the Community ODBC adapter and also using the ODBC adapter to generate schemas.  But what about creating a receive location? An ODBC receive location will periodically poll the configured database using the stored procedure or SQL string defined in your request schema. If you need to, begin by adding a new receive port to your BizTalk configuration. Create a new receive location and select to use the ODBC adapter and click Address. You will now be shown the ODBC Community Adapter Transport properties window.  Select connection string and you will be shown the Choose data Source window.  If you have already created the Test Database source when generating a schema from ODBC this will be shown (if not go and take a look in my previous post to see how this is done).   You will then need to choose the SQL command that will be run by the recieve port.  In this case I have deployed the Test Mapping schemas that I created previously and selected the Request schema. You should now have populated the appropriate properties for the ODBC Com Adapter. Finally set the standard receive location properties and your ODBC receive location is now ready.

    Read the article

  • Anomaly with bash PS1 definition

    - by Michael Wiles
    My root and admin user both have the same .bashrc file. The prompt section of the .bashrc is the following: if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac But the problem is that the admin user and root user have different prompts. admin's prompt is: admin@hostname:~$ and root's prompt is root@hostname:/home# So it seems root is using the "xterm" version and admin is not. Why does the .bashrc file have this difference in prompts? How do I get the admin user to also use the xterm version? How would I test that condition? If I run echo $TERM while running as the admin user I get xterm so as far as I can tell, it should be using the xterm version for the admin user.

    Read the article

  • KERPOOOOW!

    - by Matt Christian
    Recently I discovered the colorful world of comic books.  In the past I've read comics a few times but never really got into them.  When I wanted to start a collection I decided either video games or comics yet stayed away from comics because I am less familiar with them. In any case, I stopped by my local comic shop and picked up a few comics and a few trade paperbacks.  After reading them and understanding their basic flow I began to enjoy not only the stories but the art styles hiding behind those little white bubbles of text (well, they're USUALLY white).  My first stop at the comic store I ended up with: - Nemesis #1 (cover A) - Shuddertown #1 (cover A I think) - Daredevil: King of Hell's Kitchen Trade Paperback - Peter Parker: Spiderman - One Small Break Trade Paperback It took me about 3-4 days to read all of that including re-reading the single issues and glancing over the beginning of Daredevil again.  After a week of looking around online I knew a little more about the comics I wanted to pick up and the kind of art style I enjoyed.  While Peter Parker: Spiderman was ok, I really enjoyed the detailed, realistic look of Daredevil and Shuddertown. Now, a few years back I picked up the game The Darkness for PS3.  I knew it was based off a comic but never read the comic.  I decided I'd pick up a few issues of it and ended up with: - The Darkness #80 (cover A) - The Darkness #81 (cover A) - The Darkness #82 (cover A) - The Darkness #83 (cover A) - The Darkness Shadows and Flame #1  (one-shot; cover A) - The Darkness Origins: Volume 1 Trade Paperback (contains The Darkness #1-6) - New Age boards and bags for storing my comics The Darkness is relatively good though jumping from issue #6 to issue #80 I lost a bit on who the enemy in the current series is.  I think out of all of them, issue #83 was my favorite of them. I'm signed up at the local shop to continue getting Nemesis, The Darkness, and Shuddertown, and I'll probably pick up a few different ones this weekend...

    Read the article

  • How to install SIP+PyQt with apt-get + pip + virtualenv?

    - by kjo
    [I originally posted this question, under a different title, in StackOverflow (here), but later I realized that my problem is very specific to apt-get, hence I am re-posting it here. Sorry for the duplication.] I'm trying to install PyQt on Ubuntu (and within a virtualenv). The list of obstacles I'm dealing with is far too long to include here, but the one I'm currently trying to get past is this: % workon myvenv (myvenv)% cd ~/.virtualenvs/myvenv/build/pyqt (myvenv)% python ./configure.py Traceback (most recent call last): File "./configure.py", line 32, in <module> import sipconfig OK, so let's install sipconfig... (myvenv)% pip install SIP Downloading/unpacking SIP Downloading sip-4.14.8-snapshot-02bdf6cc32c1.zip (848Kb): 848Kb downloaded Running setup.py egg_info for package SIP Traceback (most recent call last): File "<string>", line 14, in <module> IOError: [Errno 2] No such file or directory: '/home/yt/.virtualenvs/myvenv/build/SIP/setup.py' Complete output from command python setup.py egg_info: Traceback (most recent call last): File "<string>", line 14, in <module> IOError: [Errno 2] No such file or directory: '/home/yt/.virtualenvs/myvenv/build/SIP/setup.py' ---------------------------------------- Command python setup.py egg_info failed with error code 1 in /home/yt/.virtualenvs/myvenv/build/SIP Storing complete log in /home/yt/.pip/pip.log The only recipe I've found so far installing SIP is this % python configure.py % make % sudo make install ...but this recipe goes against my policy of doing all my Ubuntu installations either through apt-get (or through pip in the case of Python modules). Is there some way that I can install SIP with apt-get (and possibly pip)?

    Read the article

  • How To Use AutoFill on a Google Docs Spreadsheet [Quick Tips]

    - by The Geek
    Have you ever wanted to fill an entire row or column with a series of values? If you’re an Excel user, you can do the same thing in Google Docs. If you haven’t used either, here’s the quick way to do it. Just type in a couple of numbers in sequence… 1 2 3 works pretty well. You could also put them across a row instead of down a column. Then move your mouse over the dot in the corner until the pointer changes, then just drag it downward (or if you are filling a row instead, you can drag it to the right). Let go of the mouse, and your data will be automatically filled in. You could also make it skip by 1 instead, like 2 4 6 8, etc… It all works the same way. Sadly there’s no really advanced options like Excel has, but for most uses, this is good enough. Also, we’re aware this is a very simple tip for most of you, but we’re trying to help the beginners out as well! Similar Articles Productive Geek Tips Integrate Google Docs with Outlook the Easy WayHow To Export Documents from Google Docs to Your ComputerHow To Monitor Sites Without an RSS Feed Using FirefoxGeek Software: Use DeliCount to Get Site-wide del.icio.us Bookmark CountsMake Excel 2007 Read Spreadsheets To You TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista

    Read the article

  • How to get both PIPESTATUS and output in bash script

    - by Mustafa Serdar Sanli
    I'm trying to get last modification date of a file with this command TM_LOCAL=`ls -l --time-style=long-iso ~/.vimrc | awk '{ print $6" "$7 }'` TM_LOCAL has value like "2012-05-16 23:18" after execution of this line I'd also like to check PIPESTATUS to see if there was an error. For example if file does not exists, ls returns 2. But $? has value 0 as it has the return value of awk. If I run this command alone, I can check the return value of ls by looking at ${PIPESTATUS[0]} ls -l --time-style=long-iso ~/.vimrc | awk '{ print $6" "$7 }' But $PIPESTATUS does not work as I've expected if I assign the output to a variable as in the first example. In this case, $PIPESTATUS array has only 1 element which is same as $? So, the question is, how can I get both $PIPESTATUS and assign the output to a variable at the same time?

    Read the article

  • Mantaining Wordpress website with subversion

    - by Geries
    I want to setup a website using wordpress, which we can modified locally and then via subversion commit the site and make it public. This means to installing new plugins, changing the content, testing updates of wordpress to see if they work with the theme, etc. The idea is to control the development on the site, in case we need to keep track of the dev or roll back, because of unexpected bugs in a the plugins, theme, etc. I've read this article in codex, however I'm not sure how this is done when, we want to include the content and changes on the options of worpdress and plugins (which is in the mysql). Thanks

    Read the article

  • Gigabyte Motherboard + Adaptec RAID = No Booting from any drives

    - by Farseeker
    I have a brand new PC, just out of the box. It has a Gigabyte GA-P55-USB3 motherboard. I also have an Adaptec ASR-2504 SAS RAID card with 2x 15k Seagate Barracuda SAS drives attached. After the motherboard init's its on-board RAID it then init's the Adaptec RAID. It detects all the RAID devices OK, but when it gets to Loading Operating System... (i.e. right before it should load the OS) it just sits there forever, doing nothing: If I force it to boot from the optical drive, you see it spin up for a few seconds then die down again. If I remove the Adaptec RAID card, everything works perfectly. As soon as it's plugged back in, it never gets past that stage. The RAID card should be perfectly fine (it was before), but I have raised a case with Adaptec anyway. Any suggestions on what I can try to get these two to play nicely together?

    Read the article

  • Unit test SHA256 wrapper queries

    - by Sam Leach
    I am just beginning to write unit tests. So please bear with me. I have the following SHA256 wrapper. public static string SHA256(string plainText) { StringBuilder sb = new StringBuilder(); SHA256CryptoServiceProvider provider = new SHA256CryptoServiceProvider(); var hashedBytes = provider.ComputeHash(Encoding.UTF8.GetBytes(plainText)); for (int i = 0; i < hashedBytes.Length; i++) { sb.Append(hashedBytes[i].ToString("x2").ToLower()); } return sb.ToString(); } Do I want to be testing it? If so, what do you recommend? My thought process is as follows: What logic is there here. The answer is my for loop and ToString("x2") so from my understanding I want to be testing this part? I can assume Encoding.UTF8.GetBytes(plainText) works. Correct assumption? I can assume SHA256CryptoServiceProvider.ComputeHash() works. Correct assumption? I want to be only testing my logic. In this case is limited to the printing of hex encoded hash. Correct? Thanks.

    Read the article

  • FAVICON: Favicon now showing up

    - by Russ
    I'm using a .png favicon file and it is not showing up on my site. Doing a grep, I see the following in home.htm which looks right for me(I have also confirmed it's in the HEAD section within home.htm): home.htm: <link rel="shortcut icon" type="image/png" href="favicon.png"> The favicon.png file is in the same directory as the home.html file. Any suggestions are welcome! Thanks all. In case the file info is revealing for anyone, I'll attach it here:

    Read the article

  • can anyone help me through the preparation of Eclipse IDE for android developer in ubuntu 12.04?

    - by csbl
    I'm new to to Linux, in this particular case, to Ubuntu. I have a small android project I have to finnish until this Friday and I'm still stuck with the install and preparing of the development envrironment. The only thing I did was install the Eclipse IDE. I'm still missing the SDK, JAVA and anything else that might be needed. Can someone help me through this? It's only because I'm running out of time to develop, or else I would embarc on a deeper investigation of this OS. I tried the step to install android platforms, through Eclispe-Help-Install New Software, and I got the follwoing error messages, at the end of the process: [2012-06-06 17:35:56 - adb] /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] 'adb version' failed! /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] Failed to parse the output of 'adb version': Standard Output was: Error Output was: /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] 'adb version' failed! /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] Failed to parse the output of 'adb version': Standard Output was: Error Output was: /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory Can anyone help, please??

    Read the article

  • The one feature that would make me invest in SSIS 2012

    - by Peter Larsson
    This week I was invited my Microsoft to give two presentations in Slovenia. My presentations went well and I had good energy and the audience was interacting with me. When I had some time over from networking and partying, I attended a few other presentations. At least the ones who where held in English. One of these was "SQL Server Integration Services 2012 - All the News, and More", given by Davide Mauri, a fellow co-worker from SolidQ. We started to talk and soon came into the details of the new things in SSIS 2012. All of the official things Davide talked about are good stuff, but for me, the best thing is one he didn't cover in his presentation. In earlier versions of SSIS than 2012, it is possible to have a stored procedure to act as a data source, as long as it doesn't have a temp table in it. In that case, you will get an error message from SSIS that "Metadata could not be found". This is still true with SSIS 2012, so the thing I am talking about is not really a SSIS feature, it's a SQL Server 2012 feature. And this is the EXECUTE WITH RESULTSETS feature! With this, you can have a stored procedure with a temp table to deliver the resultset to SSIS, if you execute the stored procedure from SSIS and add the "WITH RESULTSETS" option. If you do this, SSIS is able to take the metadata from the code you write in SSIS and not from the stored procedure! And it's very fast too. Let's say you have a stored procedure in earlier versions and when referencing that stored procedure in SSIS forced SSIS to call the stored procedure (which can take hours), to retrieve the metadata. Now, with RESULTSETS, SSIS 2012 can continue in milliseconds! This is because you provide the metadata in the RESULTSETS clause, and if the data from the stored procedure doesn't match this RESULTSETS, you will get an error anyway, so it makes sense Microsoft has provided this optimization for us.

    Read the article

  • What extra packages are needed by Amarok to transcode to MP3?

    - by Jon Pawley
    I'm using Amarok 2.6.0, on KDE version 4.9.3, on Kubuntu 12.04. I would like to be able to copy my music onto my MP3 player (in this case, my iPhone 3), but to transcode the tracks as I copy them over. However, when I right-click on the selected track, and choose "Copy to Collection" and select my iPhone, the option to transcode to MP3 is greyed out. What additional packages does Amarok need in order to enable the transcode to MP3 option? Thanks, Jon Oh, the "Amarok DIagnostics" output, from the Help menu gives: Amarok Diagnostics Amarok Version: 2.6.0 KDE Version: 4.9.3 Qt Version: 4.8.2 Phonon Version: 4.6.0 Phonon Backend: GStreamer (4.6.2) PulseAudio: Yes Amarok Scripts: Amarok Script Console 1.0 (stopped) Discogs 1.1b (stopped) Lyricwiki .2 (stopped) Free Music Charts 1.6.0 (stopped) Librivox.org 1.0 (stopped) Cool Streams 1.0 (stopped) BBC 1.1 (stopped) Amarok Plugins: AudioCd Collection (enabled) DAAP Collection (enabled) MTP Collection (enabled) MySQLServer Collection (enabled) MySQLe Collection (enabled) UPnP Collection (enabled) Universal Mass Storage Collection (enabled) iPod, iPad & iPhone Collection (enabled) Ampache (disabled) Jamendo (disabled) Last.fm (enabled) MP3 Music Store (disabled) MP3tunes (disabled) Magnatune Store (disabled) Podcast Directory (enabled) gpodder.net (enabled) Local Files & USB Mass Storage Backend (enabled) NFS Share Backend (enabled) SMB (Windows) Share Backend (enabled)

    Read the article

  • Tuning B2B Server Engine Threads in SOA Suite 11g

    - by Shub Lahiri, A-Team
    Background B2B 11g has a number of parameters that can be tweaked to tune the engine for handling high volumes of messages. These parameters are also known as B2B server properties and managed via the EM console.  This note highlights one aspect of the tuning exercise and describes the different threads, that can be configured to tune the performance of a B2B server. Symptoms The most common indicator of a B2B engine in need of a tuning is reflected in the constant build-up of messages in an internal JMS queue within the B2B server. It is called B2B_EVENT_QUEUE and can be monitored via the Weblogic server console. Whenever such a behaviour is seen, it usually results in general degradation of performance. Remedy There could be many contributing factors behind a B2B server's degradation of performance. However, one of the first places to tune the server from the out-of-the-box, default configuration is to change the number of internal engine threads allocated within the B2B server. Usually the default configuration for the B2B server engine threads is not suitable for high-volume of messaging loads. So, it is necessary to increase the counts for 3 types of such threads, by specifying the appropriate B2B server properties via the EM console, namely, Inbound - b2b.inboundThreadCount Outbound - b2b.outboundThreadCount Default - b2b.defaultThreadCount The function of these threads are fairly self-explanatory. In other words, the inbound threads process the inbound messages that are coming into the B2B server from an external endpoint. Similarly, the outbound threads processes the messages that are sent out from the B2B server. The default threads are responsible for certain B2B server-specific special tasks. In case the inbound and outbound thread counts are not specified, the default thread count also dictates the total number of inbound and outbound threads. As found in any tuning exercise, the optimisation of these threads is usually reached via an iterative process. The best working combination of the thread counts are directly related to the system infrastructure, traffic load and several other environmental factors.

    Read the article

  • how to mod rewrite unicode byte sequence for the multibyte hyphen character

    - by ChickenFur
    We have case where some adobe pdf files format the hyphen character as %E2%80%90. See http://forums.adobe.com/message/2807241 this is caused by the Calibri font I guess. So these pdf files have been released and the links don't work So I thought mod rewrite would come to the rescue. I followed this post here mod_ReWrite to remove part of a URL but I can't seem to search for the % characters according to this question. Is there anything else I can do? Here is the rewrite rule I want to use: RewriteRule ^foo%(.+)bar /foo-bar [L,R=301] I also tried this and it doesn't work RewriteRule ^foo%E2%80%90bar /foo-bar [L,R=301] Any Ideas?

    Read the article

  • What FOSS solutions are available to manage software requirements?

    - by boos
    In the company where I work, we are starting to plan to be compliant to the software development life cycle. We already have, wiki, vcs system, bug tracking system, and a continuous integration system. The next step we want to have is to start to manage, in a structured way, software requirements. We dont want to use a wiki or shared documentation because we have many input (developer, manager, commercial, security analyst and other) and we dont want to handle proliferation of .doc around the network share. We are trying to search and we hope we can find and use a FOSS software to manage all this things. We have about 30 people, and don't have a budget for commercial software. We need a free solution for requirements management. What we want is software that can manage: Required features: Software requirements divided in a structured configurable way Versioning of the requirements (history, diff, etc, like source code) Interdependency of requirements (child of, parent of, related to) Rule Based Access Control for data handling Multi user, multi project File upload (for graph, document related to or so on) Report and extraction features Optional Features: Web Based Test case Time based management (timeline, excepted data, result data) Person allocation and so on Business related stuff Hardware allocation handling I have already play with testlink and now i'm playing with RTH, the next one i try is redmine.

    Read the article

  • How should I architect my Model and Data Access layer objects in my website?

    - by Robin Winslow
    I've been tasked with designing Data layer for a website at work, and I am very interested in architecture of code for the best flexibility, maintainability and readability. I am generally acutely aware of the value in completely separating out my actual Models from the Data Access layer, so that the Models are completely naive when it comes to Data Access. And in this case it's particularly useful to do this as the Models may be built from the Database or may be built from a Soap web service. So it seems to me to make sense to have Factories in my data access layer which create Model objects. So here's what I have so far (in my made-up pseudocode): class DataAccess.ProductsFromXml extends DataAccess.ProductFactory {} class DataAccess.ProductsFromDatabase extends DataAccess.ProductFactory {} These then get used in the controller in a fashion similar to the following: var xmlProductCreator = DataAccess.ProductsFromXml(xmlDataProvider); var databaseProductCreator = DataAccess.ProductsFromXml(xmlDataProvider); // Returns array of Product model objects var XmlProducts = databaseProductCreator.Products(); // Returns array of Product model objects var DbProducts = xmlProductCreator.Products(); So my question is, is this a good structure for my Data Access layer? Is it a good idea to use a Factory for building my Model objects from the data? Do you think I've misunderstood something? And are there any general patterns I should read up on for how to write my data access objects to create my Model objects?

    Read the article

  • I just moved, have no internet on my laptop or ipod, but everyone else who lives here does

    - by Kay
    I just moved to Thunder Bay and my laptop as well as my ipod cannot connect to the internet. My laptop allows me to write the password for the wifi, but I still have no internet connection. When I try to use the cable, the computer tells me I have a perfect connection, even the icon shows that it's working, but I can't open any web pages or use any internet functions. When I try to use MSN it sends me to a troubleshooting option and informs me that there's some kind of problem with the "gateway". I have unplugged the modem and the router and plugged them back in, this did not help. I am living in a home where all the people are using wifi on the same system as me, and no one has ever had any problems. Back home both my laptop and my ipod worked without a problem both in my home, as well as on campus. Since this problem seems to be limited only to me, it would indicate that there's a problem on my end -- with my laptop. However, in that case my ipod would be working. It has never failed to connect before. Any suggestions would be much appreciated.

    Read the article

  • Does command/query separation apply to a method that creates an object and returns its ID?

    - by Gilles
    Let's pretend we have a service that calls a business process. This process will call on the data layer to create an object of type A in the database. Afterwards we need to call again on another class of the data layer to create an instance of type B in the database. We need to pass some information about A for a foreign key. In the first method we create an object (modify state) and return it's ID (query) in a single method. In the second method we have two methods, one (createA) for the save and the other (getId) for the query. public void FirstMethod(Info info) { var id = firstRepository.createA(info); secondRepository.createB(id); } public void SecondMethod(Info info) { firstRepository.createA(info); var key = firstRepository.getID(info); secondRepository.createB(key); } From my understanding the second method follows command query separation more fully. But I find it wasteful and counter-intuitive to query the database to get the object we have just created. How do you reconcile CQS with such a scenario? Does only the second method follow CQS and if so is it preferable to use it in this case?

    Read the article

  • How to setup a user account for a web application

    - by ximus
    Hi, What are the main guidelines to setting up a user account on a Linux machine for a web app? In my case it is a Rails application that does file management. First thing I can think of is to limit access rights to only the directories it needs. But how exactly should I go about this? Setup rights through a user group or a through the user's ownership of those directories. I have very little experience in user rights management. What else do I need to consider? I've heard of ACL's and SELinux, do I need to look into any of these to guaranty decent security for my simple web app? Any advice about this and anything not mentioned welcomed, Thanks, Max. I will be using Ubuntu.

    Read the article

< Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >