Search Results

Search found 39968 results on 1599 pages for 'access manager'.

Page 401/1599 | < Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >

• KVM Guest not reachable from host

  - by Paul

  Hello, I'm running Ubuntu server 9.10, installed KVM etc. Created the bridge network following instructions on help.ubuntu.com/community/KVM/Networking Created a windows 2008 guest using virt-install command line (using virt-manager GUI from a remote Ubuntu desktop would not let me select the ISO location). I can however use a remote virt-manager to connect to the guest and complete the windows install. Within windows 2008 I changed the IP address but cannot ping from outside world. The bridge network appears fine - I'm not sure what else to look at! Here is the interfaces file: The loopback network interface auto lo iface lo inet loopback The primary network interface auto eth0 iface eth0 inet manual # auto br0 iface br0 inet static address 60.234.64.50 netmask 255.255.255.248 network 60.234.0.0 broadcast 60.234.0.255 gateway 60.234.64.49 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 auto eth1 iface eth1 inet static address 192.168.12.2 netmask 255.255.255.0 broadcast 192.168.12.255 The ip of the windows server is 60.234.64.52 What else should I check? Regards Paul.

  Read the article

• Serving static files fails - nginx

  - by Sergei

  Hi, I've been looking and trying around all night, but without success. I configured nginx to serve my static files and proxy all the other traffic: server { listen 80; server_name mydomain.com; access_log /home/boudewijn/www/bbt/brouwers/logs/access.log; error_log /home/boudewijn/www/bbt/brouwers/logs/error.log; location / { proxy_pass http://127.0.0.1:8080; include /etc/nginx/proxy.conf; } location /media/ { root /home/boudewijn/www/bbt/brouwers/; } } The proxy passing is no problem, but when I go to mydomain.com/media/ or try to access any testfile over there, it's without success. I paid attention to the difference between root and alias, my media folder exists, I paid attention to the trailing slashes, but still I get a 404 when trying to access my static media files. Any help?

  Read the article

• VLAN trunking between Juniper EX -> Cisco Catalyst -> and Cisco Router

  - by Hugo Garcia

  I have the following scenario: EX2200 Switch whit ge-0/0/6 set as an access port on VLAN 80 ge-0/0/0 set as a trunk port connected to a catalyst switch and various vlans allowed to pass includin vlan 80 On the Catalyst Switch. port #3 set up as a trunk port that receives traffic from the EX switch. port 46 is set up also as a trunk port that connects to a cisco router. Port #48 is where the host used to be connected host - EX2200 - Catalyst - Router the problem is that this EX2200 is a new addition to the network and the host connected previosly to the catalyst switch. traffic is not getting from the host to the router, but the router can send ARP request to the host. following is the relevant configuration: Catalyst Switch: interface GigabitEthernet1/46 switchport trunk encapsulation dot1q switchport trunk allowed vlan 80,82,83,93,289 switchport mode trunk mtu 1532 media-type rj45 speed 1000 duplex full arp timeout 300 ! interface GigabitEthernet1/48 switchport access vlan 80 switchport mode access mtu 1532 media-type rj45 speed 100 duplex full arp timeout 300 no cdp enable ! EX2200 Switch:

  Read the article

• What's wrong with my custom .desktop xsession?

  - by Noam Gagliardi

  I want to create a custom Xmonad session that loads an .xsession script in my home folder. This is the original file I copied. This one works: [Desktop Entry] Encoding=UTF-8 Name=XMonad Comment=Lightweight tiling window manager Exec=xmonad Icon=xmonad.png Type=XSession This is my modified file, xmonad-custom.desktop. When I logout, then login choosing this "xmonad-custom", the screen just flashes and sends me back to the ubuntu login screen (as if it briefly logs in and out of the session): [Desktop Entry] Encoding=UTF-8 Name=XMonad Custom Comment=Lightweight tiling window manager Exec=/home/{username}/.xsession Icon=xmonad.png Type=XSession X-Ubuntu-Gettext-Domain=gdm I also tried without the last line. This is my ~/.xsession file, in case there's an error with this script: #!/bin/env bash xrdb -merge .Xresources trayer --edge top --align right --SetDockType true --SetPartialStrut \ true --expand true --width 15 --height 12 --transparent true --tint 0x000000 & dropbox start & exec xmonad

  Read the article

• SQL 2000 and group names

  - by Nasa

  I have a SQL 2000 server which has databases, under user section of the database object, I have some NT 4.0 groups. These groups were migrated over to Active Directory some time ago using ADMT with SID history. The original source domain groups have since been deleted. The access shown is olddomain\groupname. I don't know why, if they were ntfs permissions they would update automatically to target\groupname. The users in the AD domain still have access to the database as they are a member of the migrated group (Target\groupname). I was wondering 1) Why does the old group (source\groupname) show up as it doesn't exist anymore. But access is still granted to the target group? 2) Is there any easy way to update the group name from source\groupname to target\groupname? Thanks for any help.

  Read the article

• Security issues of running PHP scripts as the owner of the PHP file with suexec

  - by thomasrutter

  I'm using suexec to ensure that PHP scripts (and other CGI/FastCGI apps) are run as the account holder associated with the relevant virtual host. This allows for securing each users' scripts from reading/writing by other users. However, it occurs to me that this opens up a different security hole. Previously, the web server ran as an unprivileged user, with read-only access to user's files (unless the user changed the file permissions for some reason). Now, the web server can also write to user's files. So while I've prevented different users taking advantage of each other's scripts, I've made it so that in the event that some application has a remote code injection vulnerability, it now has not only read access but also write access to all that user's scripts and website. How can I deal with this? One idea I've had is to create a second user account for each user account in the system, so that each user has their own user account, and all their scripts are run under another user account. But that seems cumbersome.

  Read the article

• how to disable isight auto adjustments ?

  - by George Profenza

  The built-in isight cam on my macbook machine keeps re-adjusting the lighting (and focus I think). I need to manually set those, but I found nothing of any use in System Preferences or System Profiler. Any way to access the settings ? Any magic terminal commands that allows access to the camera ? Anyone has a driver that allows for any camera access ? 'mac - it just works'...sure, if you want to use it like a kid. the second you actually want to do something with you mac other than the basic things, you can do on ANY regular machine anyway, your 'rights' are done with, as apple seems to only encourage dumb clients. I'm not saying saying this applies to all mac users, but the 'typical/average' one in my view is only going to use it for media(music,video) and web(facebook,blogging, all that) and maybe podcasting,webcasting,etc....ok this is turning into a rant, so I will finish here.

  Read the article

• Running PHP scripts as the owner of the PHP file: security issues

  - by thomasrutter

  I'm using suexec to ensure that PHP scripts (and other CGI/FastCGI apps) are run as the account holder associated with the relevant virtual host. This allows for securing each users' scripts from reading/writing by other users. However, it occurs to me that this opens up a different security hole. Previously, the web server ran as an unprivileged user, with read-only access to user's files (unless the user changed the file permissions for some reason). Now, the web user can also write to user's files. So while I've prevented different users taking advantage of each other's scripts, I've made it so that in the event that some application has a remote code injection vulnerability, it now has not only read access but also write access to all that user's scripts and website. How can I deal with this? One idea I've had is to create a second user account for each user account in the system, so that each user has their own user account, and all their scripts are run under another user account. But that seems cumbersome.

  Read the article

• Pasting extended ACL contents into telnet session to Cisco Router SIM

  - by Kyle Brandt

  I have a telnet session to a dynamips router sim. When I try to paste the contents of an actually working ACL retrieved from 'show run' into the access list, only part of gets pasted. The session is something like: enable conf t ip access-list extended Internet <PASTE of Rules> It stops right in the middle of a line: permit tcp any host 123.123.123.123 gt 1 ! should be gt 1023 Anyone know what is happening? The source is an extended access list.

  Read the article

• How to get Windows Server 2008 VM to use multiple cores

  - by David Fraser

  I have a Windows Server 2008 machine running in VirtualBox. On initial installation, only one processor was made available, but now I want to run it as a multiprocessor machine. I have made all four cores available in the VirtualBox settings (as well as enabling VT-x/AMD-V and Nested Paging), but Task Manager still only shows one CPU. However, the four CPU cores are visible in Device Manager under Processors. In the event log on startup, I can see the following relevant events: EventLog.6009 Microsoft (R) Windows (R) 6.00.6002 Service Pack 2 Multiprocessor Free Kernel-Processor-Power.4 Processor 0 exposes the following: 1 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) How can I make this system actually boot up as a multiprocessor machine?

  Read the article

• ACL in linux-based samba shares

  - by Odin

  If I mount a samba share like this from a linux server using ACL in ext3... mount -t cifs //192.168.0.10/smbshare /mnt/smbshare -o user=root password=secret ...and access the share with linux/smb-user smbuser. I have given smbuser write access to all catalogs, but when I write something to the share the owner becomes root (the user that mountet the share). Is there any possibility to make smbuser the owner of the files/catalogs he creates even if the share is mountet by the root-user? This case is supposed to work on a linux terminal server so many different users access the smb share (mountet by root).

  Read the article

• Clicking or Knocking with Seagate HD

  - by Daniel A. White

  My laptop's main HD makes a clicking or knocking sound when Windows or the Bios tries to access it. I put it into a SATA dock and it sounds perfectly fine when spinning up, but after Windows tries to access it, it becomes a repetitive clicking or knocking sound. Does anyone know any tips that might help me access my data? I have most of it backed up, but I would still like to Ghost it before I send it off for repairs. I know my laptop is still under warranty.

  Read the article

• Linux stretch cluster: MD replication, DRBD or Veritas?

  - by PieterB

  For the moment there's a lot of choices for setting up a Linux cluster. For cluster manager: you can use Red Hat Cluster manager, Pacemaker or Veritas Cluster Server. The first one has the most momentum, the second one comes by default with RH subscriptions and the last one is very expensive and has a very good reputation ;-) For storage: - You can replicate LUN's using software raid / md device - You can use the network using DRBD replication, which offers a bit more flexibility - You can use Veritas Storage Foundation technology to talk to your SANs replication technology. Anyone has any recommandations or experience with these technologies?

  Read the article

• Can't get Ubuntu 11.10 working on my VirtualBox running on Mac OsX 10.6.8

  - by stack-o-frankie

  I installed the Guest Additions, installed the isight-firmware-tools by using the AppleUSBVideoSupport file but I still can't get access to the iSight webcam. When I launch vlc v4l2:///dev/video0 I get the following errors: Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS") Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE") [0x92d492c] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. Blocked: call to setlocale(6, "") Blocked: call to setlocale(6, "") (process:2922): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (vlc:2922): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (vlc:2922): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (vlc:2922): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (vlc:2922): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", [0x963287c] v4l2 demux error: VIDIOC_STREAMON failed [0x963287c] v4l2 demux error: cannot set input (Device or resource busy) [0x96430a4] v4l2 access error: VIDIOC_STREAMON failed [0x96430a4] v4l2 access error: cannot set input (Device or resource busy) [0x9371104] main input error: open of `v4l2:///dev/video0' failed: (null) Any clue?

  Read the article

• Tomcat memory usage grows until crash with no GC run

  - by Phil

  I'm administrating a server running Tomcat that is getting a lot of traffic lately. If I monitor memory usage in Task Manager I can see the memory usage growing and eventually tomcat crashes around the 1GB mark. Here's the memory relevent bits I've set in Tomcat Properties (this is a Windows Server): Intial memory pool: 1024 MB Maximum memory pool: 1024 MB -XX:MaxPermSize=256M The weird thing is since these problems arose I've deployed Lambda Probe to the Tomcat instance and the memory usage values I see there are much lower, for example Task Manager might show 467MB used while the "Total" used in Probe is 212 MB. Also, the Maximum Total listed in Probe is 1.29GB, when I would have expected 1GB, the maximum memory set above. If I force the garbage collector to run using Probe, I can keep Tomcat from crashing for a while (indefinitely, AFAIK). So why doesn't the GC run automatically and stop Tomcat from crashing? Thanks.

  Read the article

• Weird behaviour with OpenVPN: can not connect to a few websites

  - by Gaby Solis

  My OpenVPN server is Ubuntu 10.04.4 LTS and openvpn version is 2.x My client is on Win 7. He can access most sites but not Youtube, Facebook, Twitter, groups.google.com, etc My server.conf is: local x.x.x.x port 1194 proto udp dev tun ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key dh /etc/openvpn/keys/dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status /etc/openvpn/keys/openvpn-status.log verb 4 I can access Youtube etc using SSH Tunnel + SOCKS Proxy, and the Ubuntu server can access all sites. so nothing is wrong with the Ubuntu server. With little information I can provide, I am not looking for a quck solution. How can I debug?

  Read the article

• Set up DPM to use hardware VSS Provider with EMC Clariion SAN

  - by Ryan

  We recently purchased an EMC Clariion AX4 SAN and we're using it to provide storage for our Hyper-V virtual machines. I've already got the servers registered with it and configured the failover cluster CSV's, etc. I'm wanting to figure out what I have to do to set up the VSS Provider for the SAN, so that Microsoft Data Protection Manager can use it to backup the virtual machines. I'm new when it comes to Clariion SAN's, so I have no idea how to set up the VSS provider. I downloaded something from Powerlink that was labeled VSS Provider and installed it on one of the machines connected to the SAN. It had something to do with a Solutions Enabler (I don't know what that is), but it doesn't really seem like it did anything. I read something that suggested I'd need to have Navisphere Manager to use the VSS Provider on the AX4, but we didn't purchase that - we're just using Navisphere Express. Can anyone help me figure out how to get the VSS Provider up and running?

  Read the article

• Using both domain users and local users for Squid authentication?

  - by Massimo

  I'm working on a Squid proxy which needs to authenticate users against an Active Directory domain; this works fine, Samba was correctly set up and Squid authenticates users via ntlm_auth. Relevant lines in squid.conf: auth_param ntlm program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp auth_param ntlm children 5 auth_param ntlm keep_alive on acl Authenticated proxy_auth REQUIRED http_access allow Authenticated http_access deny all Now, I need a way to allow access to users which don't have a domain account. I know I could create an "internet user" account in the domain, but this would allow access, although limited, to domain resources (file shares, etc.); I need something that will allow only Internet access. The ideal solution would be using a local account on the proxy server, either a Linux account or a Squid one; I know Squid supports this, but I'm unable to have it use both domain authentication and Squid/local authentication if domain auth is unsuccesful. Can this be done? How?

  Read the article

• Linux stretch cluster: MD replication, DRBD or Veritas?

  - by PieterB

  For the moment there's a lot of choices for setting up a Linux cluster. For cluster manager: you can use Red Hat Cluster manager, Pacemaker or Veritas Cluster Server. The first one has the most momentum, the second one comes by default with RH subscriptions and the last one is very expensive and has a very good reputation ;-) For storage: - You can replicate LUN's using software raid / md device - You can use the network using DRBD replication, which offers a bit more flexibility - You can use Veritas Storage Foundation technology to talk to your SANs replication technology. Anyone has any recommandations or experience with these technologies?

  Read the article

• Other users on my Server?

  - by Jennifer Weinberg

  I'm buying a Server from a person (that I don't know really well) and I want to make sure that the previous owner hasn't got any access anymore. It's an Ubuntu Virtual Server and I already received the admin access (via shell). How can I find out if there are still other accounts left, who are still able to access my server (e.g. with a still existing shell account, ftp or another type of user account)? And how can I delete them if these accounts exist? Best regards, Jennifer

  Read the article

• Squid/Kerberos authentication with only Linux

  - by user28362

  Hi, I would like to know if it possible to let a Windows Xp machine authenticate to Squid (Linux) using Kerberos without the need of an Active Directory domain. I only want to create a Kerberos ticket on the client side, which should give the client access to squid (using I.E.). I only found tutorials about configuring A.D./Squid, not an environment with only Linux servers. Thanks Update: The kerberos setup is correctly done, the proxy and client can get tickets. As for the browser (FF/IE), I get: ERROR Cache Access Denied While trying to retrieve the URL: http://www.google.com/ The following error was encountered: * Cache Access Denied. Sorry, you are not currently allowed to request: http://www.google.com/ from this cache until you have authenticated yourself. In kerberos, I get: squid_kerb_auth: Got 'YR ElRNTVMTUABBAABAB4IIogAAAAAAAAAAAAAAAAAAAAAFASgDAAAADw==' from squid (length: 59). squid_kerb_auth: parseNegTokenInit failed with rc=101 squid_kerb_auth: received type 1 NTLM token This message is strange, as I didn't configure NTLM. It looks like the browser uses the wrong authentication methode.

  Read the article

• Weird Windows 2003 MSDTC and SQL 2005 issue

  - by seagull surfer

  scenario: Windows 2003 sp2 x64 enterprise edition. SQL 2005 sp2 cu9 x64 Enterprise edition After restarting the resource groups on two node active-active cluster, 3 SQL 2005 instances start up fine. The 4th one starts up but starts throwing the following error. "Enlist operation failed: 0x8004d00e(XACT E NOTRANSACTION). SQL Server could not register with Microsoft Distributed Transaction Coordinator (MS DTC) as a resource manager for this transaction. The transaction may have been stopped by the client or the resource manager." MSDTC is fine since the other 3 function normally. The only way to "fix" it is to take the 4th instance offline and bring it online again. Is there any way to fix this enlistment without restarting?

  Read the article

• Bacula Director and Storage in LAN

  - by B14D3

  I have two networks LAN and DMZ.. Machines in DMZ are accesible from internet ( only over http). In LAN I have servers that see all LAN and all DMZ machines but machinse from DMZ don't see any LAN servers. Machines in LAN have access only to all LAN and DMZ, no direct access to internet and no access from internet. DMZ <------ LAN DMZ ----X--->LAN I'm planning to configure Bacula as major backup system. My plan is to install Bacula Director and Storage deamon on the same server in LAN for safety reasons. So my question is: Will this configuration work, is it posible for bacula director and storage deamon installed on server in LAN to makes backup servers that are in my DMZ? Or in this network configuration Bacula should be in DMZ? (If yes will I can backup with it servers in LAN ?)

  Read the article

• Windows service running under network credentials doesn't autostart

  - by David Alpert

  I have a Subversion Server running as a resident service on a Windows XP Pro machine. That service needs to access a secure network fileshare, so I used the Services-Properties-Log On tab to tell the service to run as a user who has access to the target fileshare. That works out fine until the machine restarts, when the service fails to autostart. I am able to start it manually by logging in, going back to that Services-Properties-Log On tab and reconfiming the explicit credentials. Do I have to manually start this service under alternate credentials every time the machine reboots? Is there something else I can do to make sure that my Subversion server service autostarts with proper access to authenticate against this network share?

  Read the article

• Cannot connect to a VPN server - authentication failed with error code 691

  - by stacker

  When trying to connect to a VPN server, I get the 691 error code on the client, which say: Error Description: 691: The remote connection was denied because the user name and password combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server. Now, I validated that the username and password are correct, and tried to login with domain name and without. I also installed a certification to use with the IKEv2 security type. I also validated that the VPN server support security method. But I cannot login. In the server log I get this log: Network Policy Server denied access to a user. The user DomainName\UserName connected from IP address but failed an authentication attempt due to the following reason: The remote connection was denied because the user name and password combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server. Any idea of what can I do? Thanks in advance!

  Read the article

< Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >