Search Results

Search found 90165 results on 3607 pages for 'exit code'.

Page 402/3607 | < Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >

• global static boolean pointer causes segmentation fault using pthread

  - by asksw0rder

  New to pthread programming, and stuck on this error when working on a C++&C mixed code. What I have done is to call the c code in the thread created by the c++ code. There is a static boolean pointer used in the thread and should got free when the thread finishes. However I noticed that every time when the program processed into the c function, the value of the boolean pointer would be changed and the segmentation fault then happened due to the free(). Detail code is as follows: static bool *is_center; // omit other codes in between ... void streamCluster( PStream* stream) { // some code here ... while(1){ // some code here ... is_center = (bool*)calloc(points.num,sizeof(bool)); // start the parallel thread here. // the c code is invoked in this function. localSearch(&points,kmin, kmax,&kfinal); // parallel free(is_center); } And the function using parallel is as follows (my c code is invoked in each thread): void localSearch( Points* points, long kmin, long kmax, long* kfinal ) { pthread_barrier_t barrier; pthread_t* threads = new pthread_t[nproc]; pkmedian_arg_t* arg = new pkmedian_arg_t[nproc]; pthread_barrier_init(&barrier,NULL,nproc); for( int i = 0; i < nproc; i++ ) { arg[i].points = points; arg[i].kmin = kmin; arg[i].kmax = kmax; arg[i].pid = i; arg[i].kfinal = kfinal; arg[i].barrier = &barrier; pthread_create(threads+i,NULL,localSearchSub,(void*)&arg[i]); } for ( int i = 0; i < nproc; i++) { pthread_join(threads[i],NULL); } delete[] threads; delete[] arg; pthread_barrier_destroy(&barrier); } Finally the function calling my c code: void* localSearchSub(void* arg_) { // omit some initialize code... // my code begin_papi_thread(&eventSet); // Processing k-means, omit codes. // is_center value will be updated correctly // my code end_papi_thread(&eventSet); // when jumping into this, error happens return NULL; } And from gdb, what I have got for the is_center is: Breakpoint 2, localSearchSub (arg_=0x600000000000bc40) at streamcluster.cpp:1711 1711 end_papi_thread(&eventSet); (gdb) s Hardware watchpoint 1: is_center Old value = (bool *) 0x600000000000bba0 New value = (bool *) 0xa93f3 0x400000000000d8d1 in localSearchSub (arg_=0x600000000000bc40) at streamcluster.cpp:1711 1711 end_papi_thread(&eventSet); Any suggestions? Thanks in advance!

  Read the article

• disable shutdown/suspend if there is other user logged in via ssh

  - by Denwerko

  I remember that in versions of ubuntu around 9.04 was possible to disable user to shutdown ( and maybe suspend too ) system if there was other user logged in.Something like policykit or similar. Is it possible to do in 11.04 ? Thanks edit: if someone needs ( for own risk ), little change in /usr/lib/pm-utils/bin/pm-action will allow user to suspend machine if he is only user logged in or when user will run sudo pm-suspend. Probably not best piece of code, but for now works. diff -r 805887c5c0f6 pm-action --- a/pm-action Wed Jun 29 23:32:01 2011 +0200 +++ b/pm-action Wed Jun 29 23:37:23 2011 +0200 @@ -47,6 +47,14 @@ exit 1 fi +if [ "$(id -u )" == 0 -o `w -h | cut -f 1 -d " " | sort | uniq | wc -l` -eq 1 ]; then + echo "either youre root or root isnt here and youre only user, continuing" 1&2 + else + echo "Not suspending, root is here or there is more users" 1&2 + exit 2 + fi + + remove_suspend_lock() { release_lock "${STASHNAME}.lock" Question still stands, is it possible to forbid shutdown or suspend when there is more than one user logged in ( without rewriting system file )?

  Read the article

• CodePlex Daily Summary for Thursday, June 12, 2014

  CodePlex Daily Summary for Thursday, June 12, 2014Popular ReleasesLuna ORM - Data Layer Code Generator for Vb.Net and C#: Luna 4.14.6.7: Newer version, better LunaEngine with many new feature. Any class implements IDisposable.StackBuilder: StackBuilder 1.0.21.0: *Issue #9 : Take weight of case into account while searching optimal case... *Issue #10 : Changing direction of last layer to use remaining space while stacking a palette... *Issue #11 : New URL for AutoUpdater section in app.config... First working version of INTEX Corp Plugin...QuickMon: Version 3.15: This release expand on 'Presets' - now called Templates. A complete Template editor has been added so you can manage templates(edit, save, import and export). Existing agent configs can be saved as a template for reuse as well. Additionally a few other fixes were done as well. 1. Fixed Registry collector - allow 'blank' key value (<default> values) 2. Default Monitor pack history size is now 100 3. qmp file extension is now the defaultCommand Line Media Controller: v1.0.0.0: Initial ReleaseVidCoder: 1.5.23 Beta: Added first translations for 1.5. Includes new languages Portuguese, Japanese, Chinese Simplified and Czech. Many of these translations are still incomplete: you can help out on Crowdin. Added an option to pass through an input track if it matches the output codec. Updated HandBrake core to SVN 6209. Fixed crash on AAC passthrough. Fixed x264 settings getting set incorrectly when reverting from a preset with the Advanced tab. Fixed occasional crash when calculating remaining time. ...PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.4: Added New-Folder and Remove-Folder functions (Thanks to SueH) Added NoWait parameter to Execute-Process Added the ability for Deploy-Application.exe to point to a different .ps1 file by specifying it on the command-line Added checks to Deploy-Application.exe to verify the AppDeployToolkit folder exists Added PSAppDeployToolkit icon to Deploy-Application.exe Fixed issue where hang could occur if file version was null when using Get-FileVersion Improved exception handling and loggin...CS-Script Source: Release v3.8.1: Improved ConfigConsole AdvancedShell extensions support cs-script.7z - CS-Script Suite (binaries, documentation, samples) cs-script.ExtensionPack.7z - CS-Script Extension Pack (additional binaries and samples) cs-scriptDocs.7z - CS-Script DocumentationProligence Orchard PowerShell: OrchardPs 0.2: Version 0.2, build 5273 Major Features: Support for Orchard 1.7 and 1.8 Support for managing Orchard themes Added new cmdlets: Get-OrchardFeature, Get-Tenant, Enable-Tenant, Disable-Tenant, Get-OrchardTheme, Enable-OrchardTheme Minor Features: Added 'gopc' alias for Get-OrchardPsCommand cmdlet Hidden 'Configuration' node in Orchard VFS, as it is not yet implemented Bug Fixes: Fixed signatures for *.ps1xml files 'FromAllTenants' switch no longer fails on tenants which are not running ...BugNET Issue Tracker: BugNET 1.6: Version 1.6 is a major upgrade to the latest frameworks and components by Microsoft. It includes a major UI overhaul using the bootstrap framework to have a modern, mobile friendly and easily customized layout. Upgrade to .NET 4.5 ASP.NET social auth Add script bundling and optimization Improvements for mobile devices Bootstrap (UI overhaul) Rewritten / friendly URL's Please read our release notes for BugNET 1.6: http://blog.bugnetproject.com/2014/06/08/bugnet-1-6-and-bugnet-pro-1...CppWindowsAPI: Library Build 20140608 [3.0]: There are many changes since the older versions before v3.0. Portable to the VS2013. Note that there is something still needed to implement so the relative components have been removed from this release, which will be re-implemented into the future releases. md5: 49bf91dbe4e47dee24d1f62a0b482334 sha-1: 4eabffc1b00557cdf8e83df18ac247e230f4c1d0 md5: 4a63a4923c23bcd821e7411453779086 sha-1: 1bb8549b92c8d791346cfe7efcdaeaa37098591d md5: 371026dfcac75e33f331430cf2c65415 sha-1: 7b8a155f30206f...SFDL.NET: SFDL.NET (2.2.9.3): Changelog: Retry Bugfix (Error Counter wurde nicht korrekt zurückgesetzt) Neue Einstellung: Retry Wartezeit ist nun EinstellbarLoad Runner - Distributed HTTP Pressure Test Tool: Load Runner 1.2: 1. added support for distributed load test (read documentation for details) 2. added detail documentationbabelua: 1.5.7.0: V1.5.7.0 - 2014.6.6Stability improvement: use "lua scripts folder" as lua search path when debugging;MyBB: MyBB 1.6.13 Türkçe Kurulum Paketi: MyBB 1.6.13 - Resmi Tam Türkçe UTF-8 Sifir Kurulum Paketi Rar Pass - Sifresi: mybb.com.tr Yayinci site: http://www.mybb.com.tr Orjinal indirme adresi: http://download.mybb.com.tr Destek 1: http://destek.mybb.com.tr/showthread.php?tid=12326 Destek 2: http://tr.mybbdepo.com/mybb-1-6-13-turkce-sifir-kurulum-paketi-konusu.html Dosya: MyBB1613KurulumPaketiTR.rar MD5: d2745b79aa8cc5f8cc09e8a91b50d3cc SHA-1: 6fbb8e611e6d78f8cd3d88d7a773edc67ecc2a3e Ekleyen: XpSerkan MCTR TEAM - Gururla Sunar.SEToolbox: SEToolbox 01.033.007 Release 1: Fixed breaking changes in Space Engineers in latest update. Installation of this version will replace older version.Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.Fantom - Expression Based Dynamic Language Manager: Fantom Binary and Test Web Site: The first version of FantomDLL. Download binary and sample site for testing.Back Up Your SharePoint: SPSBackUP 0.1: Supports SharePoint 2010 and 2013 All settings with xml input file Clean backup history Notifications by mail Log script results in rtf fileNPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...Media Player (Technology Area): Media Player 0.3 (Codname Kalo): Themes are included, along with a picture viewer. This does not require 0.2 to be installedNew ProjectsAddress Auto lookup For MS CRM 2013: Address Lookup to find correct addresses in less time.Aspose for Spring.Java: Aspose for Spring Java provides source code and detailed usage instructions for extending the existing Spring.Java samples.Beatting Mole XNA Game on Windows Phone: The project game using XNA Game Engine in Windows PhoneBrecham.Obex: The library provides very broad OBEX support, providing not just the ‘Put’ operation , but also: Connect, Put, Get, SetPath, Delete, and Abort.Command Line Media Controller: This application provides a command line interface for issuing basic media controls to most media player applications.DevExpress Prism Adapters: DevExpress Prism Adapters is a project intented to provide different adapters for DevExpress controls integration with Microsoft Prism.FVSB: fvsbH Logger (8 logger): Create logs with a html format with a Visual Studio 2013 style.Masked Input For CRM 2013: Mask Input for more user friendliness and to avoid user typo errors.MovieDatabase: A movie database manipulation program that uses the movie database api.OpenNetworkTester: GUI-based bandwidth testing toolProgress Tracker: A simple pet project that allows users to set up daily tasks and track which ones they complete.ProjectShipping: summarySerXio: tfs, read tfs dataValu Akunting: Sistem Informasi Akuntansi Valudata KomputindoWindows Phone 8.1 Training for MIC15: Using for store training source code and resource url/files/.??????-??????【??】: ????????????????????,??????????,????????、????,??????????,??????????。??????-??????【??】: ??????????????????????????????,??????????,????,????,???,??????。??????-??????【??】: ????????????????,?????????????? ??。????????、????、????、?????????? ???????。????-????【??】: ??????,??????:?????,?????,??????,??????????,????????。????????!????-????【??】: ?????????????????????:????、????、??????????????,????????。????????!??????-??????【??】: ???????????,?????,???????????,???????,????,????,????,?????。??????-??????【??】: ????????????、???、??、??????????????????????????????,????????????????!????-????【??】: ???????????????????????????、????、????、???????????,????,????!?????-?????【??】: ???????????????8?，????????,????????,??????????,?????,????? ,????????!?????-?????【??】: ???????????????6?,???????????????????????????,??????????????,?????????！????-????【??】: ????????????????????????????,???????????????????????,???????。??????-??????【??】: ????????????????、??????、??????、??????、??????、?????、??????、????、????、????????！?????-?????【??】: ???????????????,????????,????:???????,??????,????,????,?????,?????,??????!?????-?????【??】: ????????????????,?????????????。?????????,???????,???????,?????????????。??????-??????【??】: ?????????????????,??????????????、???????、???????、???????、?????！??????-??????【??】: ????????????????????,????????????????,????????????????,??????！????-????【??】: ???????????????,?????????????。????????????,???????,???????,?????,?????。?????-?????【??】: ?????????????????????????,???????????,????????,?????????????????????。?????-?????【??】: ?????????????????????,????“???????,???????”?????,????????????！??????-??????【??】: ??????????????????????????,????,????,??????????。???????????????,??,??,??????????,??????...??????-??????【??】: ???????????????????,?????????????,????,?????????,?????????????,?????,?????!????-????【??】: ??????????????,?????????????? ??。????????、????、????、?????????? ???????。?????-?????【??】: ????????????????,???????????????。???????????,??????:????、????、???????！?????-?????【??】: ?????????????????,???????????,??????????????,??????????，??????????????！??????-??????【??】: ????????????,????,??????????? ???? ???? ?????????,???,??,?????!??????-??????【??】: ????????????????、????、????、??????、????、????????,????????、?????????,?????。????-????【??】: ????????????????:?????? ???? ??????,???????,??????,???????。?????-?????【??】: ????????????????,?????????????。????????????,???????,???????,?????,?????。?????-?????【??】: ?????????????????????????,???????????,????????,???????????????????????????-??????【??】: ???????????????????,?????????????,????,?????????,?????????????,?????,?????!??????-??????【??】: ?????????????????,???????????????。???????????,??????:????、????、???????！????-????【??】: ????????????????????????,????,????,??????????。???????????????,??,??,??????????,??????...?????-?????【??】: ?????????????????,???????????,??????????????,??????????，???????????????????-?????【??】: ?????????????????、?????、?????、????、?????,??????????。????????????????!??????-??????【??】: ????????????????????,????????????????,????????????????,??????！??????-??????【??】: ??????????????????????,????“???????,???????”?????,????????????！????-????【??】: ???????????????,??????????????、???????、???????、???????、?????！?????-?????【??】: ???????????????,????,????,??????,????“????、????、????、????”????????,??????.?????-?????【??】: ???????????????????,????????:??、??、???,?????????????????????!??????-??????【??】: ????????,??????:?????,?????,??????,??????????,????????。????????!??????-??????【??】: ???????????????????????:????、????、??????????????,????????。????????!??????-??????【??】: ?????????????????????????????,??????????,????,????,???,??????????-????【??】: ????????????????、????,??100%????,??????,????????????,???????????!????-????【??】: ??????????????????,??????????,????????、????,??????????,??????????。??????-??????【??】: ??????????????,????????,?????,???,???????????,???????????,?????,??????！??????-??????【??】: ??????????????????????????????????:???????,??????,????,????,????,?????！????-????【??】: ???????????????????，?????????/?,,???????????,??????????????!?????-?????【??】: ???????????????????????,????,????,????,???????,?????,?????.??????。?????-?????【??】: ???????????????、?????,????????????????????,????,????,??????。??????-??????【??】: ????????????????????,???????????????????????????,????:????,????,????,?????。?????-?????【??】: ???????????????????、????????、????????、????????、???????,????????????。?????-?????【??】: ????????????????,???????,??????。??????????,????,????,?????,????????????。???????-???????【??】: ??????????????????,??????,????,?????????????,????????,??????,????,?????...???????-???????【??】: ?????????????? , ???? ?????,??????????????,????,????,??????。?????-?????【??】: ???????????????????,??????????????,???????????,??????,????,??????,??????。??????-??????【??】: ????????????????,??????????????????????:???????,??????,????,????,????,????,????,???????！??????-??????【??】: ??????????????!???????????,??????,????,?????????????,????????,??????,????,?????...??????-??????【??】: ??????????????????、?????、?????、????、?????,??????????。????????????????!??????-??????【??】: ??????????????????????,????????,??????????,?????,????? ,????????!??????-??????【??】: ?????????????????,??????????、??????,??????????、????、????、???????。????-????【??】: ???????????、??????????????????,????????,?????,??????,????,????,????!?????-?????【??】: ?????????????????????,???????????????,???????,?????,?????,????? !!!?????-?????【??】: ?????????????????????,???????????????,????????????????????!???????-???????【??】: ????????????????????,??????????????????,?????????????。?????????,????????????。??????-??????【??】: ??????????????????,????,????,?????????.?????,?????!?????,?????????、??、??!??????-??????【??】: ???????????????????,?????????????,?????????????,??????,????,????,??????????！??????-??????【??】: ?????????????????,??????????、??????,??????????、????、????、???????。??????-??????【??】: ??????????????????????,???????????????,???????,?????,?????,????? !!!????-????【??】: ????????????????????,????????,??????????,?????,????? ,????????!?????-?????【??】: ?????????????????????,???????????????,????????????????????!?????-?????【??】: ?????????????????、????,??100%????,??????,????????????,???????????!??????-??????【??】: ??????????????????????????????,???????????????????????,???????。??????-??????【??】: ??????????????????:?????? ???? ??????,???????,??????,???????。????-????【??】: ????????????????、????、??????、????????,????????????,???????????！?????-?????【??】: ???????????,????,??????????? ???? ???? ?????????,???,??,?????!?????-?????【??】: ???????????????、????、????、??????、????、????????,????????、?????????,?????。??????-??????【??】: ?????????????:??????、????、????、????、????、??????、??????，???????!??????-??????【??】: ??????????????????,????,??.??.??.??.??.??.??.???，????，???????!????-????【??】: ??????????????，???????、???????????，????????、????、????、??????、????????。?????-?????【??】: ????????????????????????????，???????????????，????????、????、????、????、?????????，???????、???、???，??????????????????????，????????????、???????、??????????；???????????????-?????【??】: ???????????【.????.????.????.????.】??【??】:、??、??、??、??、??、??、??、??、??、??、???????????-??????【??】: ??????????????????、?????、?????、?????、?????、????,???????????,?????,??????！??????-??????【??】: ??????????????????,???、???!???????,????????????????,????????????,???!????-????【??】: ?????????????????????,????????????,?????、??、????,?????,???????????-?????【??】: ????????????????、????、????、??????????,???,?????,???????????????.?????-?????【??】: ????????????????????,?????????、??、??、????,??????????,?????????????！

  Read the article

• Stuck on busybox after a fresh install

  - by user54841

  I installed 11.10 and was getting stuck on Busybox unless I type exit. After grabbing the latest updates it then didn't get stuck on busybox but instead on a black screen of nothingness. I've now reformatted and started again using the exit technique for the time being. I had a search here before posting and none of the answers gave much insight, other than it 'could be a gfx card driver issue'. I'm using new hardware that has no issues with Mint, Win7 or WinXp. BUT note, I'm not dual booting, its a complete fresh install formatting the entire drive. Any help is appreciated as I'd really like to get stuck into Ubuntu. Thanks in advance. -Luke

  Read the article

• CentOS - Configuring Puppet to play nice with SELinux

  - by Mike Purcell

  I am running into an issue every time I attempt to start the puppetmasterd service, for which I receive the following error message: root@service1 ~ # -> /etc/init.d/puppetmaster start Starting puppetmaster: Could not prepare for execution: Got 1 failure(s) while initializing: change from absent to directory failed: Could not set 'directory on ensure: Permission denied - /etc/puppet/ssl [FAILED] Apparently there was a known issue with this scenario as outlined in this bug report, however in the bug report it states the issue has been resolved in selinux-policy-3.9.16-29.fc15, but the latest CentOS default upstream version is 3.7.19-155.el6_3.4. So I am trying to figure out the best solution. I can either create a local security policy to allow puppetmasterd the access it needs, or keep researching and install a newer version of selinux-policy outside of the default upstream channel. Anyone have any recommendations? Please don't recommend disabling SELinux... ----- Update ----- Here is the puppet.conf: [main] # The Puppet log directory. # The default value is '$vardir/log'. logdir = /var/log/puppet # Where Puppet PID files are kept. # The default value is '$vardir/run'. rundir = /var/run/puppet # Where SSL certificates are kept. # The default value is '$confdir/ssl'. ssldir = $vardir/ssl [master] certname=puppetmaster.ownij.lan dns_alt_names=puppetmaster.ownij.lan [agent] # The file in which puppetd stores a list of the classes # associated with the retrieved configuratiion. Can be loaded in # the separate ``puppet`` executable using the ``--loadclasses`` # option. # The default value is '$confdir/classes.txt'. classfile = $vardir/classes.txt # Where puppetd caches the local configuration. An # extension indicating the cache format is added automatically. # The default value is '$confdir/localconfig'. localconfig = $vardir/localconfig server=puppetmaster.ownij.lan And here are the denials per the audit log: type=AVC msg=audit(1349751364.985:666): avc: denied { search } for pid=15093 comm="puppetmasterd" name="/" dev=dm-2 ino=2 scontext=unconfined_u:system_r:puppetmaster_t:s0 tcontext=system_u:object_r:home_root_t:s0 tclass=dir type=SYSCALL msg=audit(1349751364.985:666): arch=c000003e syscall=4 success=no exit=-13 a0=1391420 a1=7fffef09ed10 a2=7fffef09ed10 a3=120c500 items=0 ppid=15092 pid=15093 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=13 comm="puppetmasterd" exe="/usr/bin/ruby" subj=unconfined_u:system_r:puppetmaster_t:s0 key=(null) type=AVC msg=audit(1349751365.302:667): avc: denied { search } for pid=15093 comm="puppetmasterd" name="/" dev=dm-2 ino=2 scontext=unconfined_u:system_r:puppetmaster_t:s0 tcontext=system_u:object_r:home_root_t:s0 tclass=dir type=SYSCALL msg=audit(1349751365.302:667): arch=c000003e syscall=4 success=no exit=-13 a0=1d18530 a1=7fffef0d04d0 a2=7fffef0d04d0 a3=8 items=0 ppid=15092 pid=15093 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=13 comm="puppetmasterd" exe="/usr/bin/ruby" subj=unconfined_u:system_r:puppetmaster_t:s0 key=(null) type=AVC msg=audit(1349751365.465:668): avc: denied { search } for pid=15093 comm="puppetmasterd" name="/" dev=dm-2 ino=2 scontext=unconfined_u:system_r:puppetmaster_t:s0 tcontext=system_u:object_r:home_root_t:s0 tclass=dir type=SYSCALL msg=audit(1349751365.465:668): arch=c000003e syscall=4 success=no exit=-13 a0=1af3930 a1=7fffef0c5c70 a2=7fffef0c5c70 a3=8 items=0 ppid=15092 pid=15093 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=13 comm="puppetmasterd" exe="/usr/bin/ruby" subj=unconfined_u:system_r:puppetmaster_t:s0 key=(null) type=AVC msg=audit(1349751365.467:669): avc: denied { search } for pid=15093 comm="puppetmasterd" name="/" dev=dm-2 ino=2 scontext=unconfined_u:system_r:puppetmaster_t:s0 tcontext=system_u:object_r:home_root_t:s0 tclass=dir type=SYSCALL msg=audit(1349751365.467:669): arch=c000003e syscall=4 success=no exit=-13 a0=1b17aa0 a1=7fffef0c5c70 a2=7fffef0c5c70 a3=8 items=0 ppid=15092 pid=15093 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=13 comm="puppetmasterd" exe="/usr/bin/ruby" subj=unconfined_u:system_r:puppetmaster_t:s0 key=(null) type=AVC msg=audit(1349751366.401:670): avc: denied { write } for pid=15093 comm="puppetmasterd" name="puppet" dev=dm-0 ino=132035 scontext=unconfined_u:system_r:puppetmaster_t:s0 tcontext=system_u:object_r:puppet_etc_t:s0 tclass=dir type=SYSCALL msg=audit(1349751366.401:670): arch=c000003e syscall=83 success=no exit=-13 a0=2d7a400 a1=1f9 a2=2d7a40f a3=7fffef0a6df0 items=0 ppid=15092 pid=15093 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=13 comm="puppetmasterd" exe="/usr/bin/ruby" subj=unconfined_u:system_r:puppetmaster_t:s0 key=(null) And the audit log if I pass through audit2allow: root@service1 ~ # -> fgrep puppetmasterd /var/log/audit/audit.log | audit2allow -m puppetmasterd module puppetmasterd 1.0; require { type home_root_t; type puppetmaster_t; type puppet_etc_t; type puppet_var_run_t; type httpd_sys_content_t; class lnk_file { relabelfrom relabelto }; class file { relabelfrom read getattr open }; class dir { write read search getattr setattr }; } #============= puppetmaster_t ============== allow puppetmaster_t home_root_t:dir { search getattr }; allow puppetmaster_t httpd_sys_content_t:dir read; allow puppetmaster_t httpd_sys_content_t:file { read getattr open }; #!!!! The source type 'puppetmaster_t' can write to a 'dir' of the following types: # puppet_log_t, puppet_var_lib_t, puppet_var_run_t, puppetmaster_tmp_t allow puppetmaster_t puppet_etc_t:dir { write setattr }; allow puppetmaster_t puppet_etc_t:lnk_file { relabelfrom relabelto }; allow puppetmaster_t puppet_var_run_t:file relabelfrom;

  Read the article

• Managing text-maps in a 2D array on to be painted on HTML5 Canvas

  - by weka

  So, I'm making a HTML5 RPG just for fun. The map is a <canvas> (512px width, 352px height | 16 tiles across, 11 tiles top to bottom). I want to know if there's a more efficient way to paint the <canvas>. Here's how I have it right now. How tiles are loaded and painted on map The map is being painted by tiles (32x32) using the Image() piece. The image files are loaded through a simple for loop and put into an array called tiles[] to be PAINTED on using drawImage(). First, we load the tiles... and here's how it's being done: // SET UP THE & DRAW THE MAP TILES tiles = []; var loadedImagesCount = 0; for (x = 0; x <= NUM_OF_TILES; x++) { var imageObj = new Image(); // new instance for each image imageObj.src = "js/tiles/t" + x + ".png"; imageObj.onload = function () { console.log("Added tile ... " + loadedImagesCount); loadedImagesCount++; if (loadedImagesCount == NUM_OF_TILES) { // Onces all tiles are loaded ... // We paint the map for (y = 0; y <= 15; y++) { for (x = 0; x <= 10; x++) { theX = x * 32; theY = y * 32; context.drawImage(tiles[5], theY, theX, 32, 32); } } } }; tiles.push(imageObj); } Naturally, when a player starts a game it loads the map they last left off. But for here, it an all-grass map. Right now, the maps use 2D arrays. Here's an example map. [[4, 1, 4, 1, 4, 1, 4, 1, 4, 1, 4, 1, 1, 1, 1, 1], [1, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 1, 1, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 1, 1, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 13, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 13, 11, 11, 11, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 1, 1, 1, 1, 1, 1, 1, 13, 13, 13, 13, 13, 1], [1, 1, 1, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 1, 1, 1]]; I get different maps using a simple if structure. Once the 2d array above is return, the corresponding number in each array will be painted according to Image() stored inside tile[]. Then drawImage() will occur and paint according to the x and y and times it by 32 to paint on the correct x-y coordinate. How multiple map switching occurs With my game, maps have five things to keep track of: currentID, leftID, rightID, upID, and bottomID. currentID: The current ID of the map you are on. leftID: What ID of currentID to load when you exit on the left of current map. rightID: What ID of currentID to load when you exit on the right of current map. downID: What ID of currentID to load when you exit on the bottom of current map. upID: What ID of currentID to load when you exit on the top of current map. Something to note: If either leftID, rightID, upID, or bottomID are NOT specific, that means they are a 0. That means they cannot leave that side of the map. It is merely an invisible blockade. So, once a person exits a side of the map, depending on where they exited... for example if they exited on the bottom, bottomID will the number of the map to load and thus be painted on the map. Here's a representational .GIF to help you better visualize: As you can see, sooner or later, with many maps I will be dealing with many IDs. And that can possibly get a little confusing and hectic. The obvious pros is that it load 176 tiles at a time, refresh a small 512x352 canvas, and handles one map at time. The con is that the MAP ids, when dealing with many maps, may get confusing at times. My question Is this an efficient way to store maps (given the usage of tiles), or is there a better way to handle maps? I was thinking along the lines of a giant map. The map-size is big and it's all one 2D array. The viewport, however, is still 512x352 pixels. Here's another .gif I made (for this question) to help visualize: Sorry if you cannot understand my English. Please ask anything you have trouble understanding. Hopefully, I made it clear. Thanks.

  Read the article

• Strategy to use two different measurement systems in software

  - by Dennis

  I have an application that needs to accept and output values in both US Custom Units and Metric system. Right now the conversion and input and output is a mess. You can only enter in US system, but you can choose the output to be US or Metric, and the code to do the conversions is everywhere. So I want to organize this and put together some simple rules. So I came up with this: Rules user can enter values in either US or Metric, and User Interface will take care of marking this properly All units internally will be stored as US, since the majority of the system already has most of the data stored like that and depends on this. It shouldn't matter I suppose as long as you don't mix unit. All output will be in US or Metric, depending on user selection/choice/preference. In theory this sounds great and seems like a solution. However, one little problem I came across is this: There is some data stored in code or in the database that already returns data like this: 4 x 13/16" screws, which means "four times screws". I need the to be in either US or Metric. Where exactly do I put the conversion code for doing the conversion for this unit? The above already mixing presentation and data, but the data for the field I need to populate is that whole string. I can certainly split it up into the number 4, the 13/16", and the " x " and the " screws", but the question remains... where do I put the conversion code? Different Locations for Conversion Routines 1) Right now the string is in a class where it's produced. I can put conversion code right into that class and it may be a good solution. Except then, I want to be consistent so I will be putting conversion procedures everywhere in the code at-data-source, or right after reading it from the database. The problem though is I think that my code will have to deal with two systems, all throughout the codebase after this, should I do this. 2) According to the rules, my idea was to put it in the view script, aka last change to modify it before it is shown to the user. And it may be the right thing to do, but then it strikes me it may not always be the best solution. (First, it complicates the view script a tad, second, I need to do more work on the data side to split things up more, or do extra parsing, such as in my case above). 3) Another solution is to do this somewhere in the data prep step before the view, aka somewhere in the middle, before the view, but after the data-source. This strikes me as messy and that could be the reason why my codebase is in such a mess right now. It seems that there is no best solution. What do I do?

  Read the article

• CodePlex Daily Summary for Sunday, October 28, 2012

  CodePlex Daily Summary for Sunday, October 28, 2012Popular ReleasesPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 7): This release is compatible with the version of the Smooth Streaming SDK released today (10/26). Release 1 of the player framework is expected to be available next week. IMPROVEMENTS & FIXESIMPORTANT: List of breaking changes from preview 6 Support for the latest smooth streaming SDK. Xaml only: Support for moving any of the UI elements outside the MediaPlayer (e.g. into the appbar). Note: Equivelent changes to the JS version due in coming week. Support for localizing all text used in t...Send multiple SMS via Way2SMS C#: SMS 1.1: Added support for 160by2Quick Launch: Quick Launch 1.0: A Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsPress Win+Q and start to search and run. http://www.codeplex.com/Download?ProjectName=quicklaunch&DownloadId=523536Orchard Project: Orchard 1.6: Please read our release notes for Orchard 1.6: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.ZXMAK2: Version 2.6.7.0: - small performance improvements - fix & improvements for Direct3D renderer (thanks to zebest for testing)Media Companion: Media Companion 3.507b: Once again, it has been some time since our release, and there have been a number changes since then. It is hoped that these changes will address some of the issues users have been experiencing, and of course, work continues! New Features: Added support for adding Home Movies. Option to sort Movies by votes. Added 'selectedBrowser' preference used when opening links in an external browser. Added option to fallback to getting runtime from the movie file if not available on IMDB. Added new Big...MSBuild Extension Pack: October 2012: Release Blog Post The MSBuild Extension Pack October 2012 release provides a collection of over 475 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...NAudio: NAudio 1.6: Release notes at http://mark-dot-net.blogspot.co.uk/2012/10/naudio-16-release-notes-10th.htmlPowerShell Community Extensions: 2.1 Production: PowerShell Community Extensions 2.1 Release NotesOct 25, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. See the ReleaseNotes.txt download above for more information.Umbraco CMS: Umbraco 4.9.1: Umbraco 4.9.1 is a bugfix release to fix major issues in 4.9.0 BugfixesThe full list of fixes can be found in the issue tracker's filtered results. A summary: Split buttons work again, you can now also scroll easier when the list is too long for the screen Media and Content pickers have information of the full path of the picked item Fixed: Publish status may not be accurate on nodes with large doctypes Fixed: 2 media folders and recycle bins after upgrade to 4.9 The template/code ...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2.2: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2...Rawr: Rawr 5.0.2: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...MCEBuddy 2.x: MCEBuddy 2.3.5: Changelog for 2.3.5 (32bit and 64bit) 1. Fixed a bug causing MCEBuddy to crash during or after installation on Windows XP 2. Bugfix for resource leak with UPnP which would lead to a failure after many days 3. Increased the UPnP discovery re-scan interval from 10 minutes to 30 minutes 4. Added support for specifying TVDB and IMDB id’s in the conversion task page (forcing the internet lookup for metadata)CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1025.5): [NEW] Support for connecting to CRM Online via Office 365 (OSDP) [NEW] Current connection information and loaded ribbon name are displayed in the status bar [IMPROVED] Connect dialog minor improvements and error message descriptions [IMPROVED] Connecting to a CRM server will close currently loaded ribbon upon confirmation (if another ribbon was loaded previously) [FIX] Fixed bug in Open Ribbon dialog which would not allow to refresh entity list more than onceReadable Passphrase Generator: KeePass Plugin 0.8.0: Changes: Interrogative phrases (questions) like why did the statesman burgle amidst lucid sunlamps Support transitive / intransitive verbs (whether a verb needs a subject or not). Change adverbs to be either before or after the verb, at random. Add an "equal" version of each strength, where each possibility is equally likely (for password purists). 3401 words in the default dictionary (~400 more than previous release) Fixed bugs when choosing verb tenseseWay payment gateway provider for NB_Store: NB_Store_Gateway_eWay: Install package for eWAY gateway for NB_Store.fastJSON: v2.0.9: - added support for root level DataSet and DataTable deserialize (you have to do ToObject<DataSet>(...) ) - added dataset testsMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.72: Fix for Issue #18819 - bad optimization of return/assign operator.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.390: Version 2.5.0.390 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Fix recent file list remove issue. WAF: Minor code improvements. BookLibrary: Fix Blend design time support o...Fiskalizacija za developere: FiskalizacijaDev 1.1: Ovo je prva nadogradnja ovog projekta nakon inicijalnog predstavljanja - dodali smo nekoliko feature-a, bilo zato što smo sami primijetili da bi ih bilo dobro dodati, bilo na osnovu vaših sugestija - hvala svima koji su se ukljucili :) Ovo su stvari riješene u v1.1.: 1. Bilo bi dobro da se XML dokument koji se šalje u CIS može snimiti u datoteku (http://fiskalizacija.codeplex.com/workitem/612) 2. Podrška za COM DLL (VB6) (http://fiskalizacija.codeplex.com/workitem/613) 3. Podrška za DOS (unu...New ProjectsAnalytics for Windows 8: SIlverlight / WPF User control integrated in WPF / SILVERLIGHT / WINDOWS PHONE Apps in order to collect user data ( Action , Timespan etc ) . bGui - User Interfaces in Batch: A small project for allowing basic user interface creation in batch. Still under strict development, see documentation for current functionality.Blog Projects: Projects wich i use in my blog postsCloud Sync Service: This Windows Service lets you sync your files across other machines by using Cloud File Storage as gateway. Amazon S3 and Windows Azure supported.CocoaVP8: CocoaVP8 is a dual-licensed commercial/GPL native library which allows Mac and iOS applications to easily use the VP8 video codec.DarkSky Orchard Microdata: Microdata is an Orchard module that exposes a MicrodataPart that will render microdata for your content items.Gerenciador Paroquial: Um conjunto de ferramentas desenvolvido para auxiliar a administração de comunidades eclesiásticas episcopais.Quick Launch: Quick Launch - a New Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsRDI Alef: RDI ALEF (ALef Entities Framework) é uma biblioteca desenvolvida em C# para persistência de objetos em um banco de dados. Encapsula um manipulador SQL e o funciSend multiple SMS via Way2SMS C#: Way2SMS, 160BY2, SMS, INDIATrending: Trending program; calculates the highest and lowest changes in frequency of specific words in two files.

  Read the article

• Installing HTK Error

  - by Alex Madill

  I am having an issue when I try and make the file, ./configure worked perfectly fine for me when I try and make: zodiac@Zodiac:~/Downloads/htk$ make all (cd HTKTools && make all) \ || case "" in *k*) fail=yes;; *) exit 1;; esac; make[1]: Entering directory `/home/zodiac/Downloads/htk/HTKTools' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/home/zodiac/Downloads/htk/HTKTools' (cd HLMTools && make all) \ || case "" in *k*) fail=yes;; *) exit 1;; esac; make[1]: Entering directory `/home/zodiac/Downloads/htk/HLMTools' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/home/zodiac/Downloads/htk/HLMTools' Thanks in advance

  Read the article

• Google I/O 2010 - Writing real-time games for Android redux

  Google I/O 2010 - Writing real-time games for Android redux Google I/O 2010 - Writing real-time games for Android redux Android 201 Chris Pruett This session is a crash course in Android game development: everything you need to know to get started writing 2D and 3D games, as well as tips, tricks, and benchmarks to help your code reach optimal performance. In addition, we'll discuss hot topics related to game development, including hardware differences across devices, using C++ to write Android games, and the traits of the most popular games on Market. For all I/O 2010 sessions, please go to code.google.com From: GoogleDevelopers Views: 10 0 ratings Time: 58:57 More in Science & Technology

  Read the article

• Extending Visual Studio with a Custom Designer

  - by Mick

  How do I create a custom Visual Studio 2008 UI designer for a C# file? For example, when you double click on a DataSet in the Solution Explorer, a UI screen appears that allows you to edit the DataSet, even though it is defined in XML/code (which you can right click and "View Code"). Usually this code is separated from user code in some way, either by region ("Windows Forms Designer Generated Code"), by codegen (".g.cs" for WPF XAML files), or some other means like partial classes.

  Read the article

• (SOLVED) Problems Rendering Text in OpenGL Using FreeType

  - by Sean M.

  I've been following both the FreeType2 tutorial and the WikiBooks tuorial, trying to combine things from them both in order to load and render fonts using the FreeType library. I used the font loading code from the FreeType2 tutorial and tried to implement the rendering code from the wikibooks tutorial (tried being the keyword as I'm still trying to learn model OpenGL, I'm using 3.2). Everything loads correctly and I have the shader program to render the text with working, but I can't get the text to render. I'm 99% sure that it has something to do with how I cam passing data to the shader, or how I set up the screen. These are the code segments that handle OpenGL initialization, as well as Font initialization and rendering: //Init glfw if (!glfwInit()) { fprintf(stderr, "GLFW Initialization has failed!\n"); exit(EXIT_FAILURE); } printf("GLFW Initialized.\n"); //Process the command line arguments processCmdArgs(argc, argv); //Create the window glfwWindowHint(GLFW_SAMPLES, g_aaSamples); glfwWindowHint(GLFW_CONTEXT_VERSION_MAJOR, 3); glfwWindowHint(GLFW_CONTEXT_VERSION_MINOR, 2); g_mainWindow = glfwCreateWindow(g_screenWidth, g_screenHeight, "Voxel Shipyard", g_fullScreen ? glfwGetPrimaryMonitor() : nullptr, nullptr); if (!g_mainWindow) { fprintf(stderr, "Could not create GLFW window!\n"); closeOGL(); exit(EXIT_FAILURE); } glfwMakeContextCurrent(g_mainWindow); printf("Window and OpenGL rendering context created.\n"); glClearColor(0.2f, 0.2f, 0.2f, 1.0f); //Are these necessary for Modern OpenGL (3.0+)? glViewport(0, 0, g_screenWidth, g_screenHeight); glOrtho(0, g_screenWidth, g_screenHeight, 0, -1, 1); //Init glew int err = glewInit(); if (err != GLEW_OK) { fprintf(stderr, "GLEW initialization failed!\n"); fprintf(stderr, "%s\n", glewGetErrorString(err)); closeOGL(); exit(EXIT_FAILURE); } printf("GLEW initialized.\n"); Here is the font file (it's slightly too big to post): CFont.h/CFont.cpp Here is the solution zipped up: [solution] (https://dl.dropboxusercontent.com/u/36062916/VoxelShipyard.zip), if anyone feels they need the entire solution. If anyone could take a look at the code, it would be greatly appreciated. Also if someone has a tutorial that is a little more user friendly, that would also be appreciated. Thanks.

  Read the article

• Google I/O 2012 - Breaking the JavaScript Speed Limit with V8

  Google I/O 2012 - Breaking the JavaScript Speed Limit with V8 Daniel Clifford Are you are interested in making JavaScript run blazingly fast in Chrome? This talk takes a look under the hood in V8 to help you identify how to optimize your JavaScript code. We'll show you how to leverage V8's sampling profiler to eliminate performance bottlenecks and optimize JavaScript programs, and we'll expose how V8 uses hidden classes and runtime type feedback to generate efficient JIT code. Attendees will leave the session with solid optimization guidelines for their JavaScript app and a good understanding on how to best use performance tools and JavaScript idioms to maximize the performance of their application with V8. For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 3049 113 ratings Time: 47:35 More in Science & Technology

  Read the article

• Macbook Pro late 2011 screen brightness issue

  - by buchzumlesen

  The keys to set the screen brightness work properly but everytime I reboot, the screen brightness is reverted to 100%, which is very annoying. I've already tried to add the following lines to /etc/rc.local but with no success (only the keyboard backlight stays off): #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo '1' > /sys/devices/platform/applesmc.768/leds/smc::kbd_backlight/brightness echo '6' > /sys/class/backlight/acpi_video0/brightness rfkill block bluetooth exit 0` This worked for me when I was using Ubuntu 12.04 and also did after the upgrade to 12.10 but then after rebooting the screen brightness always reverted to 100%. Would be nice if anyone knows how to fix this. My device: Macbook Pro 13" Late 2011 Thanks in advance!

  Read the article

• Managed Bitmaps 2

  This article presents classes that represent bitmaps in full managed code.

  Read the article

• Adding a small slide when player releases left/right key

  - by Dave

  the aim is for the player object to slow down and stop instead of just stopping dead. The following codes works ok when the player is not jumping, but gets stuck in an object if the player is in the air when they do it. Left Key released event: if hsp = 0 exit; hspeed = -3; friction = 0.20; if obj_Player.hspeed = 0 { hspeed = 0; } Right key released event: if hsp = 0 exit; hspeed = +3; friction = 0.20; if obj_Player.hspeed = 0 { hspeed = 0; } and here's the horizontal collision code for interest: if (place_meeting(x+hsp,y,obj_bound)) { while(!place_meeting(x+sign(hsp),y,obj_bound)) { x += sign(hsp); } hsp = 0; } x += hsp; Any help would be much appreciated. Thanks.

  Read the article

• How to generate SPMetal for a specific list (OOTB: like tasks or contacts) with custom columns

  - by KunaalKapoor

  SPMetal is used to make use of LINQ on a list in SharePoint 2010. By default when you generate SPMetal on a site you will get a code generated file for most of the lists and probably more. Here is a MSDN link for some info on SPMetal.http://msdn.microsoft.com/en-us/library/ee538255(office.14).aspxBut what if you want only to generate the code for one list?Well it is quite simple once you figure it out. You need to add an xml file to override the default settings of SPMetal and specify it in the /parameters option. I will show you how to do this.First create a Folder that will contain two files (GenerateSPMetalCode.bat and SPMetal.xml).Below is the content of the files:GenerateSPMetalCode.bat "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\SPMetal" /web:http://YourServer /code:OutPutFileName.cs /language:csharp /parameters:SPMetal.xml pause SPMetal.xml <?xml version="1.0" encoding="utf-8"?> <Web AccessModifier="Internal" xmlns="http://schemas.microsoft.com/SharePoint/2009/spmetal"> <List Name="ListName"> <ContentType Name="ContentTypeName" Class="GeneratedClassName" /> </List> <ExcludeOtherLists></ExcludeOtherLists> </Web> You will have to change some of the text in the files so that it will be specific to your SharePoint Server Setup. In the bat file you will have to change http://YourServer to the url of the web where your list is. In the SPMetal.xml file you need to change ListName to the name of your list and the ContentTypeName to the name of the content type you want to extract. The GeneratedClassName can be anything but perhaps you should rename it to something more sensible.Adding the following line: '<List Name="ListName"><ContentType Name="ContentTypeName" Class="GeneratedClassName" /> </List>'  makes sure that any custom columns added to an OOTB list like contacts or tasks are also generated, which are missed out in a regular generation.So now when you run it the SPMetal command will read the SPMetal.xml list and override its commands. ExcludeOtherLists element makes it so that only the code for the lists you specify will be generated. For some reason I got an error if I had this element above the List element.You sould now have a code file called OutPutFileName.cs that has been generated. You can now put this in your SharePoint project for use with your LINQ queries against that list.I will soon write a LINQ example that uses the generated class. UPDATE: Add the /namespace parameter to add a namespace to the generated code. "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\SPMetal" /web:http://YourServer /namespace:MySPMetalNameSpace /code:OutPutFileName.cs /language:csharp /parameters:SPMetal.xml

  Read the article

• Polipo dpkg failure problem [closed]

  - by ICXC

  Possible Duplicate: polipo E: Sub-process /usr/bin/dpkg returned an error code (1) This is the error I get each time I try to install polipo with the command apt-get install polipo or when I try to install it from Ubuntu software center: Starting polipo: Couldn't open config file /etc/polipo/config: 2. invoke-rc.d: initscript polipo, action "start" failed. dpkg: error processing polipo (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: polipo Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) Setting up polipo (1.0.4.1-1.1) ... Starting polipo: Couldn't open config file /etc/polipo/config: 2. invoke-rc.d: initscript polipo, action "start" failed. dpkg: error processing polipo (--configure): subprocess installed post-installation script returned error exit status 1 How can I solve this?

  Read the article

• How do I put different textures on different walls? LWJGL

  - by lehermj

  So far I have it so you are running around in a box, but all of the walls are the same texture! I've loaded up other textures for the walls (I want the walls a different texture than the floor) but it seems as if its being ignored... Here's my code: int floorTexture = glGenTextures(); { InputStream in = null; try { in = new FileInputStream("floor.png"); PNGDecoder decoder = new PNGDecoder(in); ByteBuffer buffer = BufferUtils.createByteBuffer(4 * decoder.getWidth() * decoder.getHeight()); decoder.decode(buffer, decoder.getWidth() * 4, Format.RGBA); buffer.flip(); glBindTexture(GL_TEXTURE_2D, floorTexture); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, decoder.getWidth(), decoder.getHeight(), 0, GL_RGBA, GL_UNSIGNED_BYTE, buffer); glBindTexture(GL_TEXTURE_2D, floorTexture); } catch (FileNotFoundException ex) { System.err.println("Failed to find the texture files."); ex.printStackTrace(); Display.destroy(); System.exit(1); } catch (IOException ex) { System.err.println("Failed to load the texture files."); ex.printStackTrace(); Display.destroy(); System.exit(1); } finally { if (in != null) { try { in.close(); } catch (IOException e) { e.printStackTrace(); } } } } int wallTexture = glGenTextures(); { InputStream in = null; try { in = new FileInputStream("walls.png"); PNGDecoder decoder = new PNGDecoder(in); ByteBuffer buffer = BufferUtils.createByteBuffer(4 * decoder.getWidth() * decoder.getHeight()); decoder.decode(buffer, decoder.getWidth() * 4, Format.RGBA); buffer.flip(); glBindTexture(GL_TEXTURE_2D, wallTexture); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, decoder.getWidth(), decoder.getHeight(), 0, GL_RGBA, GL_UNSIGNED_BYTE, buffer); glBindTexture(GL_TEXTURE_2D, wallTexture); } catch (FileNotFoundException ex) { System.err.println("Failed to find the texture files."); ex.printStackTrace(); Display.destroy(); System.exit(1); } catch (IOException ex) { System.err.println("Failed to load the texture files."); ex.printStackTrace(); Display.destroy(); System.exit(1); } finally { if (in != null) { try { in.close(); } catch (IOException e) { e.printStackTrace(); } } } } int ceilingDisplayList = glGenLists(1); glNewList(ceilingDisplayList, GL_COMPILE); glBegin(GL_QUADS); glTexCoord2f(0, 0); glVertex3f(-gridSize, ceilingHeight, -gridSize); glTexCoord2f(gridSize * 10 * tileSize, 0); glVertex3f(gridSize, ceilingHeight, -gridSize); glTexCoord2f(gridSize * 10 * tileSize, gridSize * 10 * tileSize); glVertex3f(gridSize, ceilingHeight, gridSize); glTexCoord2f(0, gridSize * 10 * tileSize); glVertex3f(-gridSize, ceilingHeight, gridSize); glEnd(); glEndList(); int wallDisplayList = glGenLists(1); glNewList(wallDisplayList, GL_COMPILE); glBegin(GL_QUADS); // North wall glTexCoord2f(0, 0); glVertex3f(-gridSize, floorHeight, -gridSize); glTexCoord2f(0, gridSize * 10 * tileSize); glVertex3f(gridSize, floorHeight, -gridSize); glTexCoord2f(gridSize * 10 * tileSize, gridSize * 10 * tileSize); glVertex3f(gridSize, ceilingHeight, -gridSize); glTexCoord2f(gridSize * 10 * tileSize, 0); glVertex3f(-gridSize, ceilingHeight, -gridSize); // West wall glTexCoord2f(0, 0); glVertex3f(-gridSize, floorHeight, -gridSize); glTexCoord2f(gridSize * 10 * tileSize, 0); glVertex3f(-gridSize, ceilingHeight, -gridSize); glTexCoord2f(gridSize * 10 * tileSize, gridSize * 10 * tileSize); glVertex3f(-gridSize, ceilingHeight, +gridSize); glTexCoord2f(0, gridSize * 10 * tileSize); glVertex3f(-gridSize, floorHeight, +gridSize); // East wall glTexCoord2f(0, 0); glVertex3f(+gridSize, floorHeight, -gridSize); glTexCoord2f(gridSize * 10 * tileSize, 0); glVertex3f(+gridSize, floorHeight, +gridSize); glTexCoord2f(gridSize * 10 * tileSize, gridSize * 10 * tileSize); glVertex3f(+gridSize, ceilingHeight, +gridSize); glTexCoord2f(0, gridSize * 10 * tileSize); glVertex3f(+gridSize, ceilingHeight, -gridSize); // South wall glTexCoord2f(0, 0); glVertex3f(-gridSize, floorHeight, +gridSize); glTexCoord2f(gridSize * 10 * tileSize, 0); glVertex3f(-gridSize, ceilingHeight, +gridSize); glTexCoord2f(gridSize * 10 * tileSize, gridSize * 10 * tileSize); glVertex3f(+gridSize, ceilingHeight, +gridSize); glTexCoord2f(0, gridSize * 10 * tileSize); glVertex3f(+gridSize, floorHeight, +gridSize); glEnd(); glEndList(); int floorDisplayList = glGenLists(1); glNewList(floorDisplayList, GL_COMPILE); glBegin(GL_QUADS); glTexCoord2f(0, 0); glVertex3f(-gridSize, floorHeight, -gridSize); glTexCoord2f(0, gridSize * 10 * tileSize); glVertex3f(-gridSize, floorHeight, gridSize); glTexCoord2f(gridSize * 10 * tileSize, gridSize * 10 * tileSize); glVertex3f(gridSize, floorHeight, gridSize); glTexCoord2f(gridSize * 10 * tileSize, 0); glVertex3f(gridSize, floorHeight, -gridSize); glEnd(); glEndList();

  Read the article

• Exceptions not being caught

  - by Thomas Freudenberg

  We have following code: try { // some code throwing MyException } catch (MyException ex) { // [1] // no (re)throw here } catch (Exception ex) { if (ex is MyException) { // [2] } } If we run the code without a debugger attached, everything runs fine. However, IF we debug the code, we don't get to point [1] but [2]. As far as I understand the language specification this should not be possible. Even weirder, this code used run fine even while debugging. The strange behavior started only a few days ago.

  Read the article

• Achieve loose coupling with the WPF/Silverlight EventBroker

  Using attached properties in WPF or Silverlight to loosly couple UI element events to arbitrary code.

  Read the article

• VirtualBox: Start Firefox in Ubuntu via a Windows script?

  - by SpaceRook

  I am using VirtualBox to run Ubuntu 12.04 as a guest in a Windows 7 host. I would like execute a command in Windows that will launch Ubuntu's Firefox. I tried VirtualBox's VBoxManage guestcontrol function. The command seems to do something, but nothing seems to happen in Ubuntu: C:\VirtualBox>VBoxManage.exe guestcontrol MyVirtualMachineUbuntu exec --image "/usr/bin/firefox" --username bob --password password --wait-stdout --verbose Waiting for guest to start process ... Waiting for process to exit ... Exit code=1 (Status=500 [successfully terminated]) The /usr/bin/firefox command works when I run it in Ubuntu. Also, with guestcontrol, I can successfully call /bin/ls. But I can't actually get a major program like Firefox to run. Any ideas? Thanks.

  Read the article

• Excel VBA File not Found

  - by Brett

  During development of some Excel vba code about every other iteration where I go in and add some code then save the file, the next time I open the thing (it is automatically set to run the code on open) I get a spurious "File not Found" error. To fix it I copy all the code- modules and classes plus the startup code, to a fresh blank excel file save it and it runs fine. This happens in both Excel 2003 and 2007. What is happening here?

  Read the article

• while(true) and loop-breaking - anti-pattern?

  - by KeithS

  Consider the following code: public void doSomething(int input) { while(true) { TransformInSomeWay(input); if(ProcessingComplete(input)) break; DoSomethingElseTo(input); } } Assume that this process involves a finite but input-dependent number of steps; the loop is designed to terminate on its own as a result of the algorithm, and is not designed to run indefinitely (until cancelled by an outside event). Because the test to see if the loop should end is in the middle of a logical set of steps, the while loop itself currently doesn't check anything meaningful; the check is instead performed at the "proper" place within the conceptual algorithm. I was told that this is bad code, because it is more bug-prone due to the ending condition not being checked by the loop structure. It's more difficult to figure out how you'd exit the loop, and could invite bugs as the breaking condition might be bypassed or omitted accidentally given future changes. Now, the code could be structured as follows: public void doSomething(int input) { TransformInSomeWay(input); while(!ProcessingComplete(input)) { DoSomethingElseTo(input); TransformInSomeWay(input); } } However, this duplicates a call to a method in code, violating DRY; if TransformInSomeWay were later replaced with some other method, both calls would have to be found and changed (and the fact that there are two may be less obvious in a more complex piece of code). You could also write it like: public void doSomething(int input) { var complete = false; while(!complete) { TransformInSomeWay(input); complete = ProcessingComplete(input); if(!complete) { DoSomethingElseTo(input); } } } ... but you now have a variable whose only purpose is to shift the condition-checking to the loop structure, and also has to be checked multiple times to provide the same behavior as the original logic. For my part, I say that given the algorithm this code implements in the real world, the original code is the most readable. If you were going through it yourself, this is the way you'd think about it, and so it would be intuitive to people familiar with the algorithm. So, which is "better"? is it better to give the responsibility of condition checking to the while loop by structuring the logic around the loop? Or is it better to structure the logic in a "natural" way as indicated by requirements or a conceptual description of the algorithm, even though that may mean bypassing the loop's built-in capabilities?

  Read the article

• Makefile - How to save the .o one directory up?

  - by nunos

  Imagine the following folder structure: project src code.c makefile bin How can I compile code.c to code.o and directly put it inside bin? I know I could compile it to code.o under src and the do "mv code.o ../bin" but that would yield an error if there were compile errors, right? Even if it works that way, is there a better way to do it? Thanks.

  Read the article

< Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >