Search Results

Search found 13817 results on 553 pages for 'net4 full'.

Page 402/553 | < Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >

• Write Fedora.iso to USB and boot it from a Macbook

  - by MTilsted

  I have an .iso image of the full Fedora 16 install (Downloaded from http://fedoraproject.org/en/get-fedora-options#formats as "Fedora 16 DVD") and the question now is: How do I write it on a USB stick, so I can install it on my Mac book? I tried using DD as the install guide said, and that gave me a USB stick which can boot from my PC. But it can't boot from the Mac (The Mac start menu don't show it as a boot option). Edit: I downloaded a live install image, and did this (SSD is my USB 4GB thing) /sbin/mkdosfs -F 32 -n usbdisk /dev/dev/sdd1 sudo livecd-iso-to-disk --format --reset-mbr --efi /tmp/download/Fedora-16-i686-Live-KDE.iso /dev/sdd1 And this produced an image which can boot on my pc but not on my mac. This seems to indicate that the --efi is not working, because if it really was EFI it would not boot on a normal pc, would it? I then tried this: (Difference being that I write the image directory to /dev/sdd instead of /dev/sdd1) but this still will not boot on the Mac (it newer shows up at the startup screen on the Mac). sudo livecd-iso-to-disk --format --reset-mbr --efi /tmp/download/Fedora- PS: My host Linux is Fedora 13.

  Read the article

• How can I mount dd image of a partition?

  - by Puneet Arora

  I created a dd image of a partition (containing an HFS+ FS) of one of my disks (and not the entire disk) a few days ago using the following command - dd conv=sync,noerror bs=8k if=/dev/sdc2 of=/path/to/img How can I mount it? I tried the following but it doesn't work - mount -o loop,ro -t hfsplus /path/to/img /path/to/mntDir It gives me mount: wrong fs type, bad option, bad superblock on /dev/loop1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so and dmesg | tail gives me - [5248455.568479] hfs: invalid secondary volume header [5248455.568494] hfs: unable to find HFS+ superblock [5248462.674836] hfs: invalid secondary volume header [5248462.674843] hfs: unable to find HFS+ superblock [5248550.672105] hfs: invalid secondary volume header [5248550.672115] hfs: unable to find HFS+ superblock [5248993.612026] hfs: unable to find HFS+ superblock [5248998.103385] hfs: unable to find HFS+ superblock [5249031.441359] hfs: unable to find HFS+ superblock [5249036.274864] hfs: unable to find HFS+ superblock Is there something wrong that I am doing? I tried searching on how to do this but all the results I get only talk about mounting a partition from within a full disk image, using the offset option with mount - none talk about the case where the image itself is that of a partition. Thanks. PS: I'm running 64bit Arch Linux, and the partition from the original disk /dev/sdc2 mounts fine.

  Read the article

• Testing for disk write

  - by Montecristo

  I'm writing an application for storing lots of images (size <5MB) on an ext3 filesystem, this is what I have for now. After some searching here on serverfault I have decided for a structure of directories like this: 000/000/000000001.jpg ... 236/519/236519107.jpg This structure will allow me to save up to 1'000'000'000 images as I'll store a max of 1'000 images in each leaf. I've created it, from a theoretical point of view seems ok to me (though I've no experience on this), but I want to find out what will happen when there will be directories full of files in there. A question about creating this structure: is it better to create it all in one go (takes approx 50 minutes on my pc) or should I create directories as they are needed? From a developer point of view I think the first option is better (no extra waiting time for the user), but from a sysadmin point of view, is this ok? I've thought I could do as if the filesystem is already under the running application, I'll make a script that will save images as fast as it can, monitoring things as follows: how much time does it take for an image to be saved when there is no or little space used? how does this change when the space starts to be used up? how much time does it take for an image to be read from a random leaf? Does this change a lot when there are lots of files? Does launching this command sync; echo 3 | sudo tee /proc/sys/vm/drop_caches has any sense at all? Is this the only thing I have to do to have a clean start if I want to start over again with my tests? Do you have any suggestions or corrections?

  Read the article

• NIC are not advertising Correct Speeds

  - by Squidly

  I have an IBM x336 that is not advertising the proper LINK speeds. One interface is the other is not. I've tried to Force it to 1000/Full but then it just shows link down. I have confirmed the switch is set to auto negotiate like my switches. I have also changed out my Ethernet Cables. I'm at a loss where to look further. I have verified that it will connect at 1G on a different swtich. This also has happened on two different servers on the same switch. This is my output from mii-tool -v for each interface. eth0: negotiated 100baseTx-FD, link ok product info: vendor 00:08:18, model 24 rev 0 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD eth1: negotiated 1000baseT-FD flow-control, link ok product info: vendor 00:08:18, model 24 rev 0 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

  Read the article

• Not able to run firefox in a head-less Ubuntu server 9.10

  - by Julio J.

  I need to run Firefox in my server in order to execute some Selenium tests from Hudson. I would love no to have to install a complete gui. So I installed Xvfb in order to fake the Gui (I understand it this way correct me if my assumptions are wrong). After some time trying to make it work, I'm stuck with the next situation: $ sudo Xvfb -ac :99 & [dix] Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list! (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) $ firefox [dix] Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list! [config/dbus] couldn't register object path (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) Xlib: extension "RANDR" missing on display ":99.0". GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: /bin/dbus-launch terminated abnormally without any error message) I'm runnig firefox without installing it from the repositories. And I'm getting a socket timeout when I try to run the selenium tests, so I guess the problem is in Firefox and Xvfb. I have installed already the nex package: i gconf-defaults-service - GNOME configuration database system (system defaults service) That in some forums suggest to be a fix, that in my case doesn't work. Any explanation about the problem and ways of solving it without installing a full gui, will be very helpful.

  Read the article

• My iPod never finishes syncing and only syncs audio, not pictures or video - any ideas as to how I c

  - by Sam Meldrum

  My iPod classic 160GB worked well for a couple of years. I used to sync a lot of photos at full resolution to it, but this recently stopped working after I moved to Windows 7. iTunes is on latest version - 9.1.1.12 iPod software is up to date - 1.1.2 Windows 7 is fully up to date and patched The symptoms are that the iPod will start to sync, all audio (music and podcasts will sync successfully) but the syncing will then just appear to continue - itunes message: Syncing iPod. Do not Disconnect. This sync never completes - I have left it trying for days. I have tried resetting the iPod using the Restore button, whereupon it restarts sync from default options and again will sync audio, but nothing else. I suspect that something has gone wrong on the hard-drive - either a bad sector or some corrupt data. Is there a process I can go through to fix this? E.g. SpinRite or a format? If so how do I go about formatting an iPod and will it be recognised as an iPod after format and work as normal? Any advice on what to try next much appreciated?

  Read the article

• Move 53,800+ files into 54 separate folders with ~1000 files each?

  - by ane

  Trying to import 53,800+ individual files (messages) using Gmail's POP fetcher. Gmail understandably refuses, giving the error: "Too many messages to download. There are too many messages on the other server." The folder in question looks like similar to: /usr/home/customer/Maildir/cur/1203672790.V57I586f04M867101.mail.net:2,S /usr/home/customer/Maildir/cur/1203676329.V57I586f22M520117.mail.net:2,S /usr/home/customer/Maildir/cur/1203677194.V57I586f26M688004.mail.net:2,S /usr/home/customer/Maildir/cur/1203679158.V57I586f2bM182864.mail.net:2,S /usr/home/customer/Maildir/cur/1203680493.V57I586f33M740378.mail.net:2,S /usr/home/customer/Maildir/cur/1203685837.V57I586f0bM835200.mail.net:2,S /usr/home/customer/Maildir/cur/1203687920.V57I586f65M995884.mail.net:2,S ... Using the shell (tcsh, sh, etc. on FreeBSD), what one-line command can I type to split this directory full of files into separate folders so Gmail only sees 1000 messages at a time? Something with find or ls | xargs mv maybe. Whatever is fastest. The desired output directory would now look something like: /usr/home/customer/Maildir/cur/1203672790.V57I586f04M867101.mail.net:2,S /usr/home/customer/Maildir/cur/1203676329.V57I586f22M520117.mail.net:2,S ... /usr/home/customer/set1/ (contains messages 1-1000) /usr/home/customer/set2/ (contains messages 1001-2000) /usr/home/customer/set3/ (etc.) Ideally, cron could run another command to automatically reverse the process in 1000 message increments every hour. So Gmail only sees & downloads 1000 at a time.

  Read the article

• Gvim on Windows 7: ALT codes not working

  - by John Sonderson

  I would like to be able to enter ALT codes in Gvim on Windows 7 as documented on the following site: Alt Codes On Windows (Windows 7 in my case), to generate a character via an ALT code you make sure that the NumLock key on your keypad is toggled on, hold down the ALT key, enter the keycode on the numeric keypad, and then release the ALT key. However this does not work in Gvim on Windows (which ignores the fact that I am pressing the ALT key and just prints to entered keypad key directly onto the screen). How can I get these keystroke combinations to work in Gvim as well? Thanks. EDIT: As the answer below points out, the way to insert non-ASCII characters for which you do not have entries on your keyboard without changing the keyboard layout is as follows: Make sure you are in insert mode, and then type CTRL-V followed by the Unicode character code of interest, for instance: CTRL-V u00E0 (generates à) CTRL-V u00C8 (generates È) CTRL-V u00E8 (generates è) CTRL-V u00E9 (generates é) CTRL-V u00EC (generates ì) CTRL-V u00F2 (generates ò) etc... See for instance http://unicode-table.com/ for a full list of Unicode character codes. The following list of Unicode characters by language may also be useful: http://en.wikipedia.org/wiki/List_of_Unicode_characters In some cases such as this one, though, there might be an easier way to enter special characters (see :help digraphs and :digraphs). For example, while in insert mode you may be able to type the following: CTRL-K E! (yields É) CTRL-K a' (yields á) Note that as the following page shows: http://code.google.com/p/vim/source/browse/runtime/doc/digraph.txt Gvim 7.4 contains an even wider set of default digraphs than Gvim 7.3, thus providing convenience to an even broader set of languages. Regards.

  Read the article

• Windows Server 2008 R2 - VPN Folder Sharing Permissions

  - by daveywc

  I have setup VPN access to my Windows Server 2008 R2 server using RRAS. Clients can connect, run applications, view shares etc. My problem is that one of the applications that they use relies on some network shares. The application is not able to access the shares unless the user first goes into Windows Explorer and accesses the share, providing their user name and password (the same one that they use to connect via the VPN). Previously on a different Windows Server 2008 (not R2) this was not necessary i.e. the application and user could access the share without providing another user name and password. I have tried giving the Everyone group full control over the shared folder - both on the Security tab and in the Permissions area under Advanced Sharing on the Sharing tab. This still did not resolve the issue. (I don't really want to give Everyone access anyway - I was hoping that granting access to a group that the VPN users had membership of would be enough). I have also turned off password protected sharing in the Advanced Sharing Settings area of the Network and Sharing Center (under both Home or Work and Public). So my question is what is preventing my VPN users from having access to these folders without having to re-supply the same login and password that they use to access the VPN? And what is the best practice in this type of scenario?

  Read the article

• Drobo-like linux file server - how do I do it?

  - by John Hunt

  I've been pondering for a long time about how I can set up a server which operates much like the Drobo storage thing. The reasons I don't actually want a drobo is because I've heard scare stories, plus I'd like to do this on the cheap. So ideally I'm looking for something like lvm so I can create a logical volume that spans many hard disks of varying sizes... obviously that only offers redundancy if I put the LV on a raid array (as far as I know..) I have however been reading about technologies such as Microsoft's drive extender which duplicates files at the filesystem level and makes sure that the mirrored files are on a different phyiscal disk.. does anyone know or recommend a filesystem or method like this as it'll hopefully make much better use of the space available than raid ever could. Performance isn't an issue, I'd just really like to make the most of the hard disks I have lying around whilst having a bit of redundancy incase a disk dies. I understand full well that this is no replacement for a backup, but I'll only be storing files of medium importance and using the nas itself as a backup of my main pc and other systems. Thanks in advance! I'm hoping zfs or btrfs or something can do something clever for me :)

  Read the article

• uname -a gives wrong version of kernel in gentoo?

  - by freedrull

  Hi I'm running gentoo and doing uname -a gives the wrong kernel version. tony@P_P-o ~ $ uname -a Linux P_P-o 2.6.27-gentoo-r8 #12 SMP PREEMPT Sun Nov 8 19:46:59 PST 2009 i686 Genuine Intel(R) CPU T2060 @ 1.60GHz GenuineIntel GNU/Linux Running eix gentoo-sources shows that I have a later version than that installed: tony@P_P-o ~ $ eix gentoo-sources [U] sys-kernel/gentoo-sources Available versions: (2.6.16-r13) 2.6.16-r13!b!s (2.6.25-r9) 2.6.25-r9!b!s (2.6.26-r4) 2.6.26-r4!b!s (2.6.27-r8) 2.6.27-r8!b!s (2.6.27-r10) 2.6.27-r10!b!s (2.6.28-r5) 2.6.28-r5!b!s (2.6.28-r6) 2.6.28-r6!b!s (2.6.29-r5) 2.6.29-r5!b!s (2.6.29-r6) 2.6.29-r6!b!s (2.6.30) ~2.6.30!b!s (2.6.30-r3) ~2.6.30-r3!b!s (2.6.30-r4) 2.6.30-r4!b!s (2.6.30-r5) 2.6.30-r5!b!s (2.6.30-r6) 2.6.30-r6!b!s (2.6.30-r7) 2.6.30-r7!b!s (2.6.30-r8) 2.6.30-r8!b!s (2.6.31) ~2.6.31!b!s (2.6.31-r1) ~2.6.31-r1!b!s (2.6.31-r2) ~2.6.31-r2!b!s (2.6.31-r3) ~2.6.31-r3!b!s (2.6.31-r4) ~2.6.31-r4!b!s {build symlink ultra1} Installed versions: 2.6.27-r8(2.6.27-r8)!b!s(07:48:25 PM 06/19/2009)(-build -symlink) 2.6.28-r5(2.6.28-r5)!b!s(12:35:17 PM 06/08/2009)(-build -symlink) 2.6.29-r5(2.6.29-r5)!b!s(07:44:33 PM 06/19/2009)(-build -symlink) 2.6.30-r6(2.6.30-r6)!b!s(11:14:45 PM 10/02/2009)(-build -symlink) Homepage: http://dev.gentoo.org/~dsd/genpatches Description: Full sources including the Gentoo patchset for the 2.6 kernel tree What gives?

  Read the article

• Proper way to use hiera with puppetlabs-spec-helper?

  - by Lee Lowder

  I am trying to write some rspec tests for my modules. Most of them now use hiera. I have a .fixures.yml: fixtures: repositories: stdlib: https://github.com/puppetlabs/puppetlabs-stdlib.git hiera-puppet: https://github.com/puppetlabs/hiera-puppet.git symlinks: mongodb: "#{source_dir}" and a spec/classes/mongodb_spec.rb: require 'spec_helper' describe 'mongodb', :type => 'class' do context "On an Ubuntu install, admin and single user" do let :facts do { :osfamily => 'Debian', :operatingsystem => 'Ubuntu', :operatingsystemrelease => '12.04' } end it { should contain_user('XXXX').with( { 'uid' => '***' } ) should contain_group('XXXX').with( { 'gid' => '***' } ) should contain_package('mongodb').with( { 'name' => 'mongodb' } ) should contain_service('mongodb').with( { 'name' => 'mongodb' } ) } end end but when I run the spec test, I get: # rake spec /usr/bin/ruby1.8 -S rspec spec/classes/mongodb_spec.rb --color F Failures: 1) mongodb On an Ubuntu install, admin and single user Failure/Error: should contain_user('XXXX').with( { 'uid' => '***' } ) LoadError: no such file to load -- hiera_puppet # ./spec/fixtures/modules/hiera-puppet/lib/puppet/parser/functions/hiera.rb:3:in `function_hiera' # ./spec/classes/mongodb_spec.rb:15 Finished in 0.05415 seconds 1 example, 1 failure Failed examples: rspec ./spec/classes/mongodb_spec.rb:14 # mongodb On an Ubuntu install, admin and single user rake aborted! /usr/bin/ruby1.8 -S rspec spec/classes/mongodb_spec.rb --color failed Tasks: TOP => spec_standalone (See full trace by running task with --trace) Module spec testing is relatively new, as is hiera. So far I have been unable to find any suitable solutions. (the back and forth on puppet-dev was interesting, but not helpful). What changes do I need to make to get this to work? Installing puppet from a gem and hacking on rubylib isn't a viable solution due to corporate policy. I am using Ubuntu 12.04 LTS + Puppet 2.7.17 + hiera 0.3.0.

  Read the article

• What laptop would be recommended for video-editing or transcoding to blu-ray?

  - by Rob

  I'm looking for a machine (has to be a laptop) reasonably fast enough to handle editing/transcoding/rendering to Blu-ray disc of full true HD 1080p (1920x1080) video from a Samsung R10 camcorder - MPEG4 25fps (not the Sony-Panasonic AVCHD format): To be able to browse through the footage (say, quarter screen is fine for monitoring) and do simple edits - cut out bad bits, add titles, fades, nothing too fancy To be able to burn the footage in 1920x1080p 24p (twenty-four) fps to blu-ray, probably don't mind if I have to leave it for a few hours, or even overnight, as long as its not still running in the morning or takes days. I ALREADY have an external USB 2.0 LG BE06LU10 blu-ray burner. Does quad core make much difference? Or would Dual-core suffice for the above? NVidia because of CUDA for increased speed. What software today can take advantage of this? Which graphics card do I need? So far I've found Dell/Alienware to be well-specified, having a 5yr old Dell laptop that still runs well, albeit slow by today's standards, gives me a good impression. My concerns are too much fan-noise and budget and some Dell Precision Laptops exceed 1500 pounds. Thoughts?

  Read the article

• DAS vs SAN storage for serving 2 to 4 nodes

  - by Luke404

  We currently have 4 Linux nodes with local storage, arranged in two active/passive pairs with storage mirrored using DRBD, running virtual machines (actually using Xen Hypervisor) for typical hosting workloads (mail, web, a couple VPS, etc.). We're approaching the (presumed) maximum IOPS of those servers, and we're planning to migrate to an external storage solution with two active nodes, with capacity for up to four active nodes. Since we're an all-Dell shop I've done some research and found the MD3200 / MD3200i products should be the ones we're looking for. We are pretty sure we won't be attaching more than 4 hosts on a single storage and I'm wondering if there is any clear advantage for one or the other. In theory I should be able to attach 4 SAS hosts to a single MD3200 (single links on a single controller MD3200, or dual redundant SAS links from each host to a dual-controller MD3200), or 4 iSCSI hosts to a single MD3200i (directly on its 4 GigE ports without any switch, again with dual links for the dual controller option). Both setups should let us implement live VM migration since all hosts can access all the LUNs at the same time, and also some shared filesystem like GFS2 or OCFS2. Also, both setups should allow full redundancy of the whole system (assuming dual controllers in the storage). One difference I can see is that the DAS solution is actually limited to 4 hosts while the iSCSI one should be able to grow to more hosts (adding two GigE switches to the mix). One point for the iSCSI solution is that it would allow us to start out with our current nodes and upgrade them at a later time (we can't add other SAS controllers, but they already have 4 GigE ports each). With the right (iSCSI|SAS) controllers I should be able to connect diskless nodes and boot them off the external storage which I think is a good thing (get rid of any local storage). On the other hand, I would have thought the SAS one to be cheaper but it seems like an MD3200 actually costs a little less than an MD3200i (?) (please note: I've used Dell gear in my examples since that's what we're looking for but I assume the same goes with other vendors) I would like to know if my assumptions above are correct, and if I'm missing any important difference between the two setups.

  Read the article

• MSSQL error: consistency-based I/O error - can it be caused by an MSSQL or OS problem?

  - by Philipp Keller

  This is what I saw in the windows error log: SQL Server detected a logical consistency-based I/O error: incorrect checksum (expected: 0x19fedd20; actual: 0x19fed5e3). It occurred during a read of page (1:1764) in database ID 6 at offset 0x00000000dc8000 in file 'D:\mssql\local_repository_pbdiffimport.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. I ran dbcc checkdb which told me I should restore with option REPAIR_ALLOW_DATA_LOSS, so I eventually ran DBCC CHECKDB (my_db_name, REPAIR_ALLOW_DATA_LOSS) WITH NO_INFOMSGS But that resulted in about 2'000 rows being lost. I restored a backup but now I'm afraid this will happen again since we already had a consistency problem in the same database about 2 weeks ago but then it happened in an index (recreated indexes solved the problem). We have investigated the discs - RAID5 looks good, no errors, and also none of the disc-check-utilities have revealed any hardware problem. Can this be caused by OS (Windows Server 2003) or by MSSQL (MSSQL Server 2005)?

  Read the article

• Looking for "bitmap-vector" image editor

  - by Borek

  I used to use PhotoImpact which is no longer developed so I'm looking for a replacement. What made PhotoImpact great to me was the ability to work in both bitmap and vector modes. What I mean by that: I could have an image or screenshot and easily add arrows, text captions or shapes to it. These shapes were vector objects so I could come back to them later and amend their properties easily. Software I know of: Paint.NET is purely bitmap so please don't recommend it - layers are not enough for my needs Drawing tools in MS Office work pretty much the way I'd like - you can paste an image and then add vector objects on top of it. It just doesn't feel right to have the full-fidelity original images stored as .docx or .pptx (I don't fully trust Word/Powerpoint that they don't compress the image) I'm not sure about GIMP but if it's just "better Paint.NET" (i.e., layers but no vector objects) I'm not interested Photoshop is out of question purely because of its price tag Corel killed PhotoImpact because they already had a competing product (Paint Shop Pro) but AFAIK it lacks vector features. Any tips for PhotoImpact alternatives would be very welcome.

  Read the article

• Outlook certificate error and separate send/receive error

  - by Richard

  I run a laptop with Vista 32bit and MS Office 2010. Outlook has two profiles, both configured as POP3/SMTP and neither go through an exchange server. Recently, one of the mail servers (hosted with easily) was getting full, so I changed the profile setting to delete from the server if mails are older than 60 days. Suddenly, I am now experiencing a couple of glitches. The first is that I get a certificate error when outlook tries it's first send/receive under the relevant profile - "The server you are connected to is using a security certificate that cannot be verified" This continues despite apparently successfully re-importing the certificate. The second glitch is that I get a "Sending reported error (0x8004010F): 'Outlook data file cannot be accessed'" error on send receive. Strangely, it seems to be trying to send/receive twice - once to 'mail@domain', which works, and the second to 'domain' which doesn't. I've tried deleting the profile and re-creating it, pointing to the original .pst file, but still get both errors. Does anybody know how I can resolve these errors? (As a by note, and not that important, more for curiosity, does anybody know why simply changing the delete from server setting against that profile would cause these issues?)

  Read the article

• Netbook (Samsung N220) on Ubuntu 10.04 slows down WiFi for other computers

  - by Joachim

  I encountered a really odd problem with my new netbook. I am running Ubuntu 10.04 on a Samsung N220 Mito. So far everything worked fine. Now I tried the machine for the first time in our work group where we have a wifi (with internet access) for all laptops. The wifi is controlled by a computer running Suse 9.3 which provides a DHCP server and imposes a firewall. At the moment there is only a macbook in the wifi, where no problems with the internet or wifi connection are encountered. Now coming to my actual problem: In addition to the macbook i connect the Samsung N220 to the Wifi. Problem: My download speed is for some reason limited to 70KB/s max. This is neither a limitation of the server/website i browse on, nor a configuration of the netbook: at home i have 500KB/s download speeds. Furthermore, it is not a default limitation for "untrusted" or "new machines" in the wifi, as for instance other new laptops get full speed internet with our wifi. Problem: Once the Samsung N220 is generating traffic in the wifi, the wifi is slowed down dramatically for all other machines: I run a ping to the router from the macbook. The ping times with the N220 ideling are 2-6ms. When I start downloading or browsing in the web with the N220 the ping speed drops to 800ms. Vice versa, when the macbook is generating the traffic the ping of the N220 to the rooter stays constant at around 2-6ms. So clearly, it is some problem originating from my netbook or maybe its treatment in the wifi. Thanks for any help

  Read the article

• Screen Flickering: Hardware or Software?

  - by Wesley

  I have a Samsung N120 netbook (upgraded to 2GB DDR2 RAM) and there has been a screen flickering issue for some time now. However, I have not been able to accurately determine whether it is a software or hardware issue. Here are some of the symptoms: The flicker is white-colored and shows up as vertical lines. Flickering or not, there may be occasionally some random blue patterns (no image distortion) The screen tends to flicker more when the screen is not tilted back all the way. When tilting the screen back and forth, the screen will usually flicker. Some images on the screen may randomly distort without full-on flickering. The screen will flicker only on certain websites, but not on others. A certain part of a webpage may constantly be distorted randomly, even when scrolling. While flickering, the mouse will not move though I'm moving my finger along the touchpad. A connected external monitor does not have any problems. The flickering is completely random and does not seem to follow any CPU/GPU usage trends. Flickering usually gets worse when the screen brightness is turned higher. There will be flickering on battery and while plugged in. Search up "Samsung N120 - Screen Flickering" on YouTube for an idea of what the flickering looks like. However, there is no visible distortions and the flickering seems to stop when the screen has dimmed. Since the problems started, I tried formatting and using Windows 7, then formatted again and went back to Windows XP. The screen was also replaced sometime during this past summer. The uninstallation of the Samsung Battery Manager (on the original install of XP) seemed to reduce the flicker partially, but eventually got worse. So, what could possibly be the problem?

  Read the article

• My system administrator set up 2 databases that sync. Master-Master. However, these two databases a

  - by Alex

  DB1 and DB2. I made changes to DB1, and it does not seem to be on DB2. When I do "SHOW SLAVE STATUS\G" on DB2, there seems to be an error: mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: Master_User: Master_Port: Connect_Retry: 60 Master_Log_File: mysql-bin.0005496 Read_Master_Log_Pos: 5445649315 Relay_Log_File: mysqld-relay-bin.0041705 Relay_Log_Pos: 1624302119 Relay_Master_Log_File: mysql-bin.0004461 Slave_IO_Running: Yes Slave_SQL_Running: No Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 1062 Last_Error: Error 'Duplicate entry '4779' for key 1' on query. Default database: 'falc'. Query: 'INSERT INTO `log` (`anon_id`, `created_at`, `query`, `episode_url`, `detail_id`, `ip`) VALUES ('fdzn1d45kMavF4qbyePv', '2009-11-19 04:19:13', 'amazon', '', '', '130.126.40.57')' Skip_Counter: 0 Exec_Master_Log_Pos: 162301982 Relay_Log_Space: 136505187184 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL 1 row in set (0.00 sec) Then, I did show tables, and it seems like DB2 is lacking a table that I created on DB1...that means that for some reason, DB2 stopped syncing with DB1. How can I simply allow them to be in full synchronization again? All I want is DB2 to be exactly the same as DB1!

  Read the article

• Using a Level 2 switch as a core switch

  - by imtech

  I have a small user base of about 20 people on at a time and spiking up to about 80 people during peak times. Most people (80+%) are connected over our Aruba managed wireless system. We have a Windows Domain. We have 3 24-Port switches all connecting back to a central 48-port switch where additional access ports, firewall, servers, and wireless controller all centrally connect back to. It's a flat network with dumb switches. I'm in the process of upgrading our infrastructure. Cisco pricing for switches is pretty high for us so I've been looking at HP Procurves which seem to be within our budget range. I want to eventually make use of 802.1x, SNMP, QoS for possible VOIP upgrades, VLAN to separate guest VLAN from authenticated users, and other more advanced features. PoE would be nice but that's probably too expensive for us. I was thinking of having our core switch be a Procurve 2610 and the rest of our switches that centrally connect to it be Procurve 2510s. A true and full blown level 3 switch is way out of our price range but a 2610 seems to be good enough for us. The 2610 does static routing which ought to be good enough for us but I'm in unfamiliar territory so I'm looking for any gotchas. Also, should all the switches be 2610s or just the core switch? Do I even need the 2610, can I just go with all 2510s? I'm new to VLANs as well so I'm not sure what it is I need but I would like an affordable infrastructure that won't need replacing 2-3 years down the line because I choose a product that was lacking.

  Read the article

• Share Exchange Calendar Outside Organization

  - by CalCurious

  I'm trying to figure out the best way to meet a user's (Corp-A-User) request to share their calendar with someone at another company (Corp-B-User). We're running Microsoft SBS 2008 with Exchange 2007 and SharePoint. The remote user is running Exchange, version unknown. Corp-A-User wants to give the Corp-B-User the ability to create appointments on Corp-A-User's calendar. This will naturally require sharing of Free/Busy information. Corp-A-User naturally lacks the vision to seen ANY problem with giving Corp-B-User full access to their calendar. But, I see the problems with that and would prefer that Corp-B-User have only the ability to see Free/Busy and create appointments. Most of the external publishing options that I have thought of, such as WebDav, allow displaying a user's calendar, but there are problems with security and the ability to create appointments. Right now, I'm thinking the cleanest solution would be to use a Google calendar along with Google Calendar Sync for the two user's Outlook clients. But, I'm not sure if there isn't a better way and I hate teh idea of pushing a corporate calendar up to Google. Not to mention the issues likely to pop up from the multiple sync paths. Does any one have a good solution for this scenario that would be willing to share what they use?

  Read the article

• Nginx configuration question

  - by Pockata

  Hey guys, i'm trying to make the autoindex feature only run for my ip address with this code: server{ ... autoindex off; ... if ($remote_addr ~ ..*.*) { autoindex on; } ... } But it doesn't work. It gives my a 403 :/ Can someone help me :) Btw, i'm using Debian Lenny and Nginx 0.6 :) EDIT: Here's my full configuration: server { listen 80; server_name site.com; server_name_in_redirect off; client_max_body_size 4M; server_tokens off; # log_subrequest on; autoindex off; # expires max; error_page 500 502 503 504 /var/www/nginx-default/50x.html; # error_page 404 /404.html; set $myhome /bla/bla; set $myroot $myhome/public; set $mysubd $myhome/subdomains; log_format new_log '$remote_addr - $remote_user [$time_local] $request ' '"$status" "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; # Star nginx :@ access_log /bla/bla/logs/access.log new_log; error_log /bla/bla/logs/error.log; if ($remote_addr ~ 94.156.58.138) { autoindex on; } # Subdomains if ($host ~* (.*)\.site\.org$) { set $myroot $mysubd/$1; } # Static files # location ~* \.(jpg|jpeg|gif|css|png|js|ico)$ { # access_log off; # expires 30d; # } location / { root $myroot; index index.php index.html index.htm; } # PHP location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $myroot$fastcgi_script_name; include fastcgi_params; } # .Htaccess location ~ /\.ht { deny all; } } I forgot to mention that when i add the code to remove static files from my access log, the static files cannot be accessed. I don't know if it's relevant :)

  Read the article

• Hyper-v on 2012R2 startup gen1 vm causes the host to freeze up

  - by sputnik

  I've searched a lot to resolve the following issue, but nothing helped me. My problem is, that starting up a first-gen vm locks up the whole host. Only a hard reset helps. Second-gen vm starts and runs perfectly. The freezes happened on 3 different vms. FreeBSD, Ubuntu, Windows Server 2008R2, while Windows 8.1 on second gen config works perfectly. Im using this pc mainly as a workstation. No eventlog errors nor dumps are generated. My system: Windows Server 2012R2 FX-8350, non OC ASRock 870 Extreme R2 (Crappy board imho) 32GB DDR3 1866@1600 (My motherboard, against the "support" for 1866ram won't work with full speed) 120GB SSD 4.5TB Storage space device I dont think that its due to my system, because vmware workstation was running without problems. Did I forget to configure something? Any help is appreciated. P.S: Even deactivating C1E, C6, C&Q didnt work. P.P.S: With no virtual network adapter set, the system still locks up. Creating a first gen vm without any hdds and network and launching works. Attaching a boot dvd causes the host to freeze. The host freezes as the gen1 vm begins to boot, doesn't matter if from dvd or hdd

  Read the article

• Install Windows 7 from ISO image

  - by Albert

  Hi, I have an ISO file of the Windows 7 DVD and I want to install it on my PC which currently only runs Linux. I don't have any DVD drive. I have some unpartitioned space on one disk where I want to install it in. When I am doing this for Linux, I usually just create the partitions from the running system, format them, mount them, copy files over, chroot into it, setup the stuff and I can boot into it (or I use some of the uncountable available scripts which do exactly that automatically). However, I have no idea how to do the same thing with Windows. So far, I tried with VMware, i.e. I gave it direct full access to the disk where I want to install it in, installed it there, then tried to boot natively into it. The Windows logo showed up but after maybe 3 seconds or so, it crashes. Safe mode also crashes. I already expected that this probably would exactly behave the way it does right now because I have heard that Windows is quite sensible about hardware changes (i.e. the VMware hardware and the real hardware). However, how can I fix it now that it works? Or I could also just delete it again and try just over. But how exactly? I also searched for ways to boot directly into an ISO file. There seem to be ways to do that via GRUB (and maybe some additional boot loader), although quite complicated. I already tried one method (GRUB: map ...iso (hdX)), however, that didn't worked. Also, even if it does work, I will get into trouble when I boot into the newly installed Windows and it requests for the DVD (because it does that at the first boot into the new system). Seems all quite complicated. Isn't there some easy way like I would do it for Linux? Or what would be the easiest way to get what I want?

  Read the article

< Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >