Search Results

Search found 47336 results on 1894 pages for 'version control cheat she'.

Page 402/1894 | < Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >

  • Apply Local Policy to Terminal Server (Windows Server 2008 R2 Standard - Workgroup )

    - by Param
    I have created 5 local user in Window server 2008 R2 std in workgroup. This server is also Terminal Server. Is it possible to apply local user Policy (gpedit.msc ) per user wise? I want to accomplish the following task 1) Restrict some control panel item as per user 2) Software Restriction as per user 3) Hide Administrative tools in control panel and start menu, only to user which has user rights 4) User must not be able to see other user data Thanks & Regards, Param

    Read the article

  • How to add more /dev/loop* devices on Fedora 19

    - by user219372
    How to add more /dev/loop* devices on Fedora 19? I do: # uname -r 3.11.2-201.fc19.x86_64 # lsmod |grep loop # ls /dev/loop* /dev/loop0 /dev/loop1 /dev/loop2 /dev/loop3 /dev/loop4 /dev/loop5 /dev/loop6 /dev/loop7 /dev/loop-control # modprobe loop max_loop=128 # ls /dev/loop* /dev/loop0 /dev/loop1 /dev/loop2 /dev/loop3 /dev/loop4 /dev/loop5 /dev/loop6 /dev/loop7 /dev/loop-control So nothing changes.

    Read the article

  • "Hostile" network in the company - please comment on a security setup

    - by TomTom
    I have a little specific problem here that I want (need) to solve in a satisfactory way. My company has multiple (IPv4) networks that are controlled by our router sitting in the middle. Typical smaller shop setup. There is now one additional network that has an IP Range OUTSIDE of our control, connected to the internet with another router OUTSIDE of our control. Call it a project network that is part of another companies network and combined via VPN they set up. This means: They control the router that is used for this network and They can reconfigure things so that they can access the machines in this network. The network is physically split on our end through some VLAN capable switches as it covers three locations. At one end there is the router the other company controls. I Need / want to give the machines used in this network access to my company network. In fact, it may be good to make them part of my active directory domain. The people working on those machines are part of my company. BUT - I need to do so without compromising the security of my company network from outside influence. Any sort of router integration using the externally controlled router is out by this idea So, my idea is this: We accept the IPv4 address space and network topology in this network is not under our control. We seek alternatives to integrate those machines into our company network. The 2 concepts I came up with are: Use some sort of VPN - have the machines log into VPN. Thanks to them using modern windows, this could be transparent DirectAccess. This essentially treats the other IP space not different than any restaurant network a laptop of the company goes in. Alternatively - establish IPv6 routing to this ethernet segment. But - and this is a trick - block all IPv6 packets in the switch before they hit the third party controlled router, so that even IF they turn on IPv6 on that thing (not used now, but they could do it) they would get not a single packet. The switch can nicely do that by pulling all IPv6 traffic coming to that port into a separate VLAN (based on ethernet protocol type). Anyone sees a problem with using he switch to isolate the outer from IPv6? Any security hole? It is sad we have to treat this network as hostile - would be a lot easier - but the support personnel there is of "known dubious quality" and the legal side is clear - we can not fulfill our obligations when we integrate them into our company while they are under a jurisdiction we don't have a say in.

    Read the article

  • harmony 1100 remote on a custom ubuntu boxee comp

    - by Markii
    I have a old computer with hdmi output that I installed ubuntu and boxee on. I want to set it up so I can control it with my harmony 1100 remote control. How can I do this? Alternatively how can I set up any remote to work with boxee there? (even IR and I can set up the 1100 from there)

    Read the article

  • .htaccess template, suggestions needed

    - by purpler
    # Defaults AddDefaultCharset UTF-8 DefaultLanguage en-US FileETag None Header unset ETag ServerSignature Off SetEnv TZ Europe/Belgrade # Rewrites Options +FollowSymLinks RewriteEngine On RewriteBase / # Redirect to WWW RewriteCond %{HTTP_HOST} ^serpentineseo.com RewriteRule (.*) http://www.serpentineseo.com/$1 [R=301,L] # Redirect index to root RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*index\.html\ HTTP/ RewriteRule ^(.*)index\.html$ /$1 [R=301,L] # Cache media files: ExpiresActive On ExpiresDefault A0 # Month <filesMatch "\.(gif|jpg|jpeg|png|ico|swf|js)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> # Week <FilesMatch "\.(css|pdf)$"> Header set Cache-Control "max-age=604800" </FilesMatch> # 10 Min <FilesMatch "\.(html|htm|txt)$"> Header set Cache-Control "max-age=600" </FilesMatch> # Do not cache <FilesMatch "\.(pl|php|cgi|spl|scgi|fcgi)$"> Header unset Cache-Control </FilesMatch> # Compress output <IfModule mod_deflate.c> <FilesMatch "\.(html|js|css)$"> SetOutputFilter DEFLATE </FilesMatch> </IfModule> # Error Documents ErrorDocument 206 /error/206.html ErrorDocument 401 /error/401.html ErrorDocument 403 /error/403.html ErrorDocument 404 /error/404.html ErrorDocument 500 /error/500.html # Prevent hotlinking RewriteCond %{HTTP_REFERER} !^$ RewriteCond %{HTTP_REFERER} !^http://(www\.)?serpentineseo.com/.*$ [NC] RewriteRule \.(gif|jpg|png)$ http://www.serpentineseo.com/images/angryman.png [R,L] # Prevent offline browsers RewriteCond %{HTTP_USER_AGENT} ^BlackWidow [OR] RewriteCond %{HTTP_USER_AGENT} ^Bot\ mailto:[email protected] [OR] RewriteCond %{HTTP_USER_AGENT} ^ChinaClaw [OR] RewriteCond %{HTTP_USER_AGENT} ^Custo [OR] RewriteCond %{HTTP_USER_AGENT} ^DISCo [OR] RewriteCond %{HTTP_USER_AGENT} ^Download\ Demon [OR] RewriteCond %{HTTP_USER_AGENT} ^eCatch [OR] RewriteCond %{HTTP_USER_AGENT} ^EirGrabber [OR] RewriteCond %{HTTP_USER_AGENT} ^EmailSiphon [OR] RewriteCond %{HTTP_USER_AGENT} ^EmailWolf [OR] RewriteCond %{HTTP_USER_AGENT} ^Express\ WebPictures [OR] RewriteCond %{HTTP_USER_AGENT} ^ExtractorPro [OR] RewriteCond %{HTTP_USER_AGENT} ^EyeNetIE [OR] RewriteCond %{HTTP_USER_AGENT} ^FlashGet [OR] RewriteCond %{HTTP_USER_AGENT} ^GetRight [OR] RewriteCond %{HTTP_USER_AGENT} ^GetWeb! [OR] RewriteCond %{HTTP_USER_AGENT} ^Go!Zilla [OR] RewriteCond %{HTTP_USER_AGENT} ^Go-Ahead-Got-It [OR] RewriteCond %{HTTP_USER_AGENT} ^GrabNet [OR] RewriteCond %{HTTP_USER_AGENT} ^Grafula [OR] RewriteCond %{HTTP_USER_AGENT} ^HMView [OR] RewriteCond %{HTTP_USER_AGENT} HTTrack [NC,OR] RewriteCond %{HTTP_USER_AGENT} ^Image\ Stripper [OR] RewriteCond %{HTTP_USER_AGENT} ^Image\ Sucker [OR] RewriteCond %{HTTP_USER_AGENT} Indy\ Library [NC,OR] RewriteCond %{HTTP_USER_AGENT} ^InterGET [OR] RewriteCond %{HTTP_USER_AGENT} ^Internet\ Ninja [OR] RewriteCond %{HTTP_USER_AGENT} ^JetCar [OR] RewriteCond %{HTTP_USER_AGENT} ^JOC\ Web\ Spider [OR] RewriteCond %{HTTP_USER_AGENT} ^larbin [OR] RewriteCond %{HTTP_USER_AGENT} ^LeechFTP [OR] RewriteCond %{HTTP_USER_AGENT} ^Mass\ Downloader [OR] RewriteCond %{HTTP_USER_AGENT} ^MIDown\ tool [OR] RewriteCond %{HTTP_USER_AGENT} ^Mister\ PiX [OR] RewriteCond %{HTTP_USER_AGENT} ^Navroad [OR] RewriteCond %{HTTP_USER_AGENT} ^NearSite [OR] RewriteCond %{HTTP_USER_AGENT} ^NetAnts [OR] RewriteCond %{HTTP_USER_AGENT} ^NetSpider [OR] RewriteCond %{HTTP_USER_AGENT} ^Net\ Vampire [OR] RewriteCond %{HTTP_USER_AGENT} ^NetZIP [OR] RewriteCond %{HTTP_USER_AGENT} ^Octopus [OR] RewriteCond %{HTTP_USER_AGENT} ^Offline\ Explorer [OR] RewriteCond %{HTTP_USER_AGENT} ^Offline\ Navigator [OR] RewriteCond %{HTTP_USER_AGENT} ^PageGrabber [OR] RewriteCond %{HTTP_USER_AGENT} ^Papa\ Foto [OR] RewriteCond %{HTTP_USER_AGENT} ^pavuk [OR] RewriteCond %{HTTP_USER_AGENT} ^pcBrowser [OR] RewriteCond %{HTTP_USER_AGENT} ^RealDownload [OR] RewriteCond %{HTTP_USER_AGENT} ^ReGet [OR] RewriteCond %{HTTP_USER_AGENT} ^SiteSnagger [OR] RewriteCond %{HTTP_USER_AGENT} ^SmartDownload [OR] RewriteCond %{HTTP_USER_AGENT} ^SuperBot [OR] RewriteCond %{HTTP_USER_AGENT} ^SuperHTTP [OR] RewriteCond %{HTTP_USER_AGENT} ^Surfbot [OR] RewriteCond %{HTTP_USER_AGENT} ^tAkeOut [OR] RewriteCond %{HTTP_USER_AGENT} ^Teleport\ Pro [OR] RewriteCond %{HTTP_USER_AGENT} ^VoidEYE [OR] RewriteCond %{HTTP_USER_AGENT} ^Web\ Image\ Collector [OR] RewriteCond %{HTTP_USER_AGENT} ^Web\ Sucker [OR] RewriteCond %{HTTP_USER_AGENT} ^WebAuto [OR] RewriteCond %{HTTP_USER_AGENT} ^WebCopier [OR] RewriteCond %{HTTP_USER_AGENT} ^WebFetch [OR] RewriteCond %{HTTP_USER_AGENT} ^WebGo\ IS [OR] RewriteCond %{HTTP_USER_AGENT} ^WebLeacher [OR] RewriteCond %{HTTP_USER_AGENT} ^WebReaper [OR] RewriteCond %{HTTP_USER_AGENT} ^WebSauger [OR] RewriteCond %{HTTP_USER_AGENT} ^Website\ eXtractor [OR] RewriteCond %{HTTP_USER_AGENT} ^Website\ Quester [OR] RewriteCond %{HTTP_USER_AGENT} ^WebStripper [OR] RewriteCond %{HTTP_USER_AGENT} ^WebWhacker [OR] RewriteCond %{HTTP_USER_AGENT} ^WebZIP [OR] RewriteCond %{HTTP_USER_AGENT} ^Wget [OR] RewriteCond %{HTTP_USER_AGENT} ^Widow [OR] RewriteCond %{HTTP_USER_AGENT} ^WWWOFFLE [OR] RewriteCond %{HTTP_USER_AGENT} ^Xaldon\ WebSpider [OR] RewriteCond %{HTTP_USER_AGENT} ^Zeus RewriteRule ^.*$ http://www.google.com [R,L] # Protect against DOS attacks by limiting file upload size LimitRequestBody 10240000 # Deny access to sensitive files <FilesMatch "\.(htaccess|psd|log)$"> Order Allow,Deny Deny from all </FilesMatch>

    Read the article

  • .htaccess template, suggestions needed

    - by purpler
    DefaultLanguage en-US FileETag None Header unset ETag ServerSignature Off SetEnv TZ Europe/Belgrade # Rewrites Options +FollowSymLinks RewriteEngine On RewriteBase / # Redirect to WWW RewriteCond %{HTTP_HOST} ^serpentineseo.com RewriteRule (.*) http://www.serpentineseo.com/$1 [R=301,L] # Redirect index to root RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*index\.html\ HTTP/ RewriteRule ^(.*)index\.html$ /$1 [R=301,L] # Cache media files: ExpiresActive On ExpiresDefault A0 # Month <filesMatch "\.(gif|jpg|jpeg|png|ico|swf|js)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> # Week <FilesMatch "\.(css|pdf)$"> Header set Cache-Control "max-age=604800" </FilesMatch> # 10 Min <FilesMatch "\.(html|htm|txt)$"> Header set Cache-Control "max-age=600" </FilesMatch> # Do not cache <FilesMatch "\.(pl|php|cgi|spl|scgi|fcgi)$"> Header unset Cache-Control </FilesMatch> # Compress output <IfModule mod_deflate.c> <FilesMatch "\.(html|js|css)$"> SetOutputFilter DEFLATE </FilesMatch> </IfModule> # Error Documents ErrorDocument 206 /error/206.html ErrorDocument 401 /error/401.html ErrorDocument 403 /error/403.html ErrorDocument 404 /error/404.html ErrorDocument 500 /error/500.html # Prevent hotlinking RewriteCond %{HTTP_REFERER} !^$ RewriteCond %{HTTP_REFERER} !^http://(www\.)?serpentineseo.com/.*$ [NC] RewriteRule \.(gif|jpg|png)$ http://www.serpentineseo.com/images/angryman.png [R,L] # Prevent offline browsers RewriteCond %{HTTP_USER_AGENT} ^BlackWidow [OR] RewriteCond %{HTTP_USER_AGENT} ^Bot\ mailto:[email protected] [OR] RewriteCond %{HTTP_USER_AGENT} ^ChinaClaw [OR] RewriteCond %{HTTP_USER_AGENT} ^Custo [OR] RewriteCond %{HTTP_USER_AGENT} ^DISCo [OR] RewriteCond %{HTTP_USER_AGENT} ^Download\ Demon [OR] RewriteCond %{HTTP_USER_AGENT} ^eCatch [OR] RewriteCond %{HTTP_USER_AGENT} ^EirGrabber [OR] RewriteCond %{HTTP_USER_AGENT} ^EmailSiphon [OR] RewriteCond %{HTTP_USER_AGENT} ^EmailWolf [OR] RewriteCond %{HTTP_USER_AGENT} ^Express\ WebPictures [OR] RewriteCond %{HTTP_USER_AGENT} ^ExtractorPro [OR] RewriteCond %{HTTP_USER_AGENT} ^EyeNetIE [OR] RewriteCond %{HTTP_USER_AGENT} ^FlashGet [OR] RewriteCond %{HTTP_USER_AGENT} ^GetRight [OR] RewriteCond %{HTTP_USER_AGENT} ^GetWeb! [OR] RewriteCond %{HTTP_USER_AGENT} ^Go!Zilla [OR] RewriteCond %{HTTP_USER_AGENT} ^Go-Ahead-Got-It [OR] RewriteCond %{HTTP_USER_AGENT} ^GrabNet [OR] RewriteCond %{HTTP_USER_AGENT} ^Grafula [OR] RewriteCond %{HTTP_USER_AGENT} ^HMView [OR] RewriteCond %{HTTP_USER_AGENT} HTTrack [NC,OR] RewriteCond %{HTTP_USER_AGENT} ^Image\ Stripper [OR] RewriteCond %{HTTP_USER_AGENT} ^Image\ Sucker [OR] RewriteCond %{HTTP_USER_AGENT} Indy\ Library [NC,OR] RewriteCond %{HTTP_USER_AGENT} ^InterGET [OR] RewriteCond %{HTTP_USER_AGENT} ^Internet\ Ninja [OR] RewriteCond %{HTTP_USER_AGENT} ^JetCar [OR] RewriteCond %{HTTP_USER_AGENT} ^JOC\ Web\ Spider [OR] RewriteCond %{HTTP_USER_AGENT} ^larbin [OR] RewriteCond %{HTTP_USER_AGENT} ^LeechFTP [OR] RewriteCond %{HTTP_USER_AGENT} ^Mass\ Downloader [OR] RewriteCond %{HTTP_USER_AGENT} ^MIDown\ tool [OR] RewriteCond %{HTTP_USER_AGENT} ^Mister\ PiX [OR] RewriteCond %{HTTP_USER_AGENT} ^Navroad [OR] RewriteCond %{HTTP_USER_AGENT} ^NearSite [OR] RewriteCond %{HTTP_USER_AGENT} ^NetAnts [OR] RewriteCond %{HTTP_USER_AGENT} ^NetSpider [OR] RewriteCond %{HTTP_USER_AGENT} ^Net\ Vampire [OR] RewriteCond %{HTTP_USER_AGENT} ^NetZIP [OR] RewriteCond %{HTTP_USER_AGENT} ^Octopus [OR] RewriteCond %{HTTP_USER_AGENT} ^Offline\ Explorer [OR] RewriteCond %{HTTP_USER_AGENT} ^Offline\ Navigator [OR] RewriteCond %{HTTP_USER_AGENT} ^PageGrabber [OR] RewriteCond %{HTTP_USER_AGENT} ^Papa\ Foto [OR] RewriteCond %{HTTP_USER_AGENT} ^pavuk [OR] RewriteCond %{HTTP_USER_AGENT} ^pcBrowser [OR] RewriteCond %{HTTP_USER_AGENT} ^RealDownload [OR] RewriteCond %{HTTP_USER_AGENT} ^ReGet [OR] RewriteCond %{HTTP_USER_AGENT} ^SiteSnagger [OR] RewriteCond %{HTTP_USER_AGENT} ^SmartDownload [OR] RewriteCond %{HTTP_USER_AGENT} ^SuperBot [OR] RewriteCond %{HTTP_USER_AGENT} ^SuperHTTP [OR] RewriteCond %{HTTP_USER_AGENT} ^Surfbot [OR] RewriteCond %{HTTP_USER_AGENT} ^tAkeOut [OR] RewriteCond %{HTTP_USER_AGENT} ^Teleport\ Pro [OR] RewriteCond %{HTTP_USER_AGENT} ^VoidEYE [OR] RewriteCond %{HTTP_USER_AGENT} ^Web\ Image\ Collector [OR] RewriteCond %{HTTP_USER_AGENT} ^Web\ Sucker [OR] RewriteCond %{HTTP_USER_AGENT} ^WebAuto [OR] RewriteCond %{HTTP_USER_AGENT} ^WebCopier [OR] RewriteCond %{HTTP_USER_AGENT} ^WebFetch [OR] RewriteCond %{HTTP_USER_AGENT} ^WebGo\ IS [OR] RewriteCond %{HTTP_USER_AGENT} ^WebLeacher [OR] RewriteCond %{HTTP_USER_AGENT} ^WebReaper [OR] RewriteCond %{HTTP_USER_AGENT} ^WebSauger [OR] RewriteCond %{HTTP_USER_AGENT} ^Website\ eXtractor [OR] RewriteCond %{HTTP_USER_AGENT} ^Website\ Quester [OR] RewriteCond %{HTTP_USER_AGENT} ^WebStripper [OR] RewriteCond %{HTTP_USER_AGENT} ^WebWhacker [OR] RewriteCond %{HTTP_USER_AGENT} ^WebZIP [OR] RewriteCond %{HTTP_USER_AGENT} ^Wget [OR] RewriteCond %{HTTP_USER_AGENT} ^Widow [OR] RewriteCond %{HTTP_USER_AGENT} ^WWWOFFLE [OR] RewriteCond %{HTTP_USER_AGENT} ^Xaldon\ WebSpider [OR] RewriteCond %{HTTP_USER_AGENT} ^Zeus RewriteRule ^.*$ http://www.google.com [R,L] # Protect against DOS attacks by limiting file upload size LimitRequestBody 10240000 # Deny access to sensitive files <FilesMatch "\.(htaccess|psd|log)$"> Order Allow,Deny Deny from all </FilesMatch>

    Read the article

  • Pinning based on origin of a reprepro repository.

    - by Shtééf
    I'm on Ubuntu 10.04, and trying to set up a repository using reprepro. I'd also like the pin everything in that repository to be preferred over anything else, even if packages are older versions. (It will only contain a select set of packages.) However, I cannot seem to get the pinning to work, and believe it has something to do with the repository side of things, rather than the apt configuration on the client. I've taken the following steps to set up my repository Installed a web server (my personal choice here is Cherokee), Created the directory /var/www/apt/, Created the file conf/distributions, like so: Origin: Shteef Label: Shteef Suite: lucid Version: 10.04 Codename: lucid Architectures: i386 amd64 source Components: main Description: My personal repository Ran reprepro export from the /var/www/apt/ directory. Now on any other machine, I can add this (empty) repository over HTTP to my /etc/apt/sources.list, and run apt-get update without any errors: Ign http://archive.lan lucid Release.gpg Ign http://archive.lan/apt/ lucid/main Translation-en_US Get:1 http://archive.lan lucid Release [2,244B] Ign http://archive.lan lucid/main Packages Ign http://archive.lan lucid/main Sources Ign http://archive.lan lucid/main Packages Ign http://archive.lan lucid/main Sources Hit http://archive.lan lucid/main Packages Hit http://archive.lan lucid/main Sources In my case, now I want to use an old version of Asterisk, namely Asterisk 1.4. I rebuilt the asterisk-1:1.4.21.2~dfsg-3ubuntu2.1 package from Ubuntu 9.04 (with some small changes to fix dependencies) and uploaded it to my repository. At this point I can see the new package in aptitude, but it naturally prefers the newer Asterisk 1.6 currently in the Ubuntu 10.04 repositories. To try and fix that, I have created /etc/apt/preferences.d/personal like so: Package: * Pin: release o=Shteef Pin-Priority: 1000 But when I try to install the asterisk package, it will still prefer the 1.6 version over my own 1.4 version. This is what apt-cache policy asterisk shows: asterisk: Installed: (none) Candidate: 1:1.6.2.5-0ubuntu1 Version table: 1:1.6.2.5-0ubuntu1 0 500 http://nl.archive.ubuntu.com/ubuntu/ lucid/universe Packages 1:1.4.21.2~dfsg-3ubuntu2.1shteef1 0 500 http://archive.lan/apt/ lucid/main Packages Clearly, it is not picking up my pin. In fact, when I run just apt-cache policy, I get the following: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.lan/apt/ lucid/main Packages origin archive.lan 500 http://security.ubuntu.com/ubuntu/ lucid-security/multiverse Packages release v=10.04,o=Ubuntu,a=lucid-security,n=lucid,l=Ubuntu,c=multiverse origin security.ubuntu.com [...] Unlike Ubuntu's repository, apt doesn't seem to pick up a release-line at all for my own repository. I'm suspecting this is the cause why I can't pin on release o=Shteef in my preferences file. But I can't find any noticable difference between my repository's Release files and Ubuntu's that would cause this. Is there a step I've missed or mistake I've made in setting up my repository?

    Read the article

  • HP UX can not boot from Ignite Tape

    - by Spirit
    We have hp rp2470 server running hp-ux 11.00, with LVM mirroring. As for redundancy we have second rp2470 same hw (same two processors, same ram, same two hdd’s, same number of lan cards). I want to clone first one to the second. For that purpose I am making ignite tape with the following command: make_tape_recovery -x inc_entire=vg00 Ignite tape finishes without problems. When I boot second server from this ignate tape, server is starting to boot, and ignite restore finishes without any errors, only few notes, which are normal. However vmunix is not booting and when restore finishes, it boot to ISL prompt. From this I cannot boot /stand/vmunix. I tried to run recovery shell but no success. When recovery shell ask to do frecover to restore critical files, then I receive error: frecover(5405): unable to open /dev/rmt/0m At first I thought that the problem might be in the difference of the firmware version of the servers: fw version of production server is: Firmware Version 43.50 and fw version of backup server is: Firmware Version 42.19 So i did a fw upgrade of my backup server so that both servers are v43.50, and tried a recovery but again cant boot the system. Next I did another archive tape with -I (Interactive) flag: make_tape_recovery -I -x inc_entire=vg00 and tried recovery with it, again no good. I cannot find any error or warnings on ignite log, and I cannot boot hpux. I am only on ISL prompt. This is what i've noticed on the gsp logs: ************* SYSTEM ALERT ************** SYSTEM NAME: mcnfwim1 DATE: 07/27/2003 TIME: 10:18:49 ALERT LEVEL: 6 = Boot possible, pending failure - action required REASON FOR ALERT SOURCE: 8 = I/O SOURCE DETAIL: 6 = disk SOURCE ID: 0 PROBLEM DETAIL: 0 = no problem detail LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH OFF ON ON ON LED State: Boot Failed. Running non-OS code. Check Chassis and Console Logs for error messages. 0x00000060860010B0 00000000 00000000 - type 0 = Data Field Unused 0x58000860860010B0 00006706 1B0A1231 - type 11 = Timestamp 07/27/2003 10:18:49 And another gsp log: Log Entry # 3 : SYSTEM NAME: mcnfwim1 DATE: 07/27/2003 TIME: 10:12:20 ALERT LEVEL: 6 = Boot possible, pending failure - action required SOURCE: 8 = I/O SOURCE DETAIL: 6 = disk SOURCE ID: 0 PROBLEM DETAIL: 0 = no problem detail CALLER ACTIVITY: 1 = test STATUS: 0 CALLER SUBACTIVITY: 0B = implementation dependent REPORTING ENTITY TYPE: 0 = system firmware REPORTING ENTITY ID: 00 0x00000060860010B0 00000000 00000000 type 0 = Data Field Unused 0x58000860860010B0 00006706 1B0A0C14 type 11 = Timestamp 07/27/2003 10:12:20 Type CR for next entry, - CR for previous entry, Q CR to quit. Please note that I can not change anything on the production server. I can only make changes to the backup server. Any help is appreciated.

    Read the article

  • Linux: Setting primary display (nvidia) form command line

    - by Joernsn
    Is this possible? Normally I use disper to enable my external monitor, but I don't think I can force the 2nd monitor to be primary. http://willem.engen.nl/projects/disper/ I've played around with nv-control-dpy included in the nvidia-control source, but I haven't figured out how to do it yet. How to get: http://ubuntuforums.org/showthread.php?t=922956

    Read the article

  • How do I setup Gmail for my VPS?

    - by user41010
    Hi, I'm using a Hostgator VPS running CentOS 5. I only have shell access (no control panel). I'm supposed to change my MX records and add a CNAME record for verification. What should I do? I know it would have been really easy through some kind of a control panel but I really haven't been provided one. Thanks in advance.

    Read the article

  • how does openvpn decide which interface to get IP addrs from

    - by bkrupa
    Using ubuntu 10.04 on both ends. We have a client and server machine on the SAME network attempting to make a vpn connection. We use the config files from here and made minimal changes. The server and client start and seem to connect without any trouble. The server looks like: Wed Feb 23 22:13:22 2011 MULTI: multi_create_instance called Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Re-using SSL/TLS context Wed Feb 23 22:13:22 2011 192.168.1.55:47166 LZO compression initialized Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Local Options hash (VER=V4): 'f7df56b8' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Expected Remote Options hash (VER=V4): 'd79ca330' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 TLS: Initial packet from 192.168.1.55:47166, sid=69112e42 5458135b *...* Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Feb 23 22:13:22 2011 192.168.1.55:47166 [client1] Peer Connection Initiated with 192.168.1.55:47166 On the client side the connection looks like: Wed Feb 23 22:20:07 2011 [server] Peer Connection Initiated with [AF_INET]192.168.1.41:1194 Wed Feb 23 22:20:10 2011 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Wed Feb 23 22:20:10 2011 PUSH: Received control message: 'PUSH_REPLY,route-gateway 10.8.0.4,ping 10,ping-restart 120,ifconfig 10.8.0.50 255.255.255.0' ... Wed Feb 23 22:20:10 2011 /sbin/ifconfig tap0 10.8.0.50 netmask 255.255.255.0 mtu 1500 broadcast 10.8.0.255 Wed Feb 23 22:20:10 2011 Initialization Sequence Completed The openvpn server has been configured to assign ip addresses in the range 10.8.0.* and the client has been given 10.8.0.50. When I run the following nmap from the client: Starting Nmap 5.00 ( http://nmap.org ) at 2011-02-23 22:04 EST Host 10.8.0.50 is up (0.00047s latency). Nmap done: 256 IP addresses (1 host up) scanned in 30.34 seconds Host 192.168.1.1 is up (0.0025s latency). Host 192.168.1.18 is up (0.074s latency). Host 192.168.1.41 is up (0.0024s latency). Host 192.168.1.55 is up (0.00018s latency). Nmap done: 256 IP addresses (4 hosts up) scanned in 6.33 seconds If I run an nmap from the server on 10.8.0.* I get nothing. If the client has two interfaces (wireless and tap device) when you look for a certain ip address, how does it decide which interface to connect on?

    Read the article

  • Using IIS7 why are my PNGs being cached by the browser, but my JS and CSS files not?

    - by Craig Shearer
    I am trying to sort out caching in IIS for my site. Basically, I want nothing cached, except for .png, .js, and .css files. At my site level, I opened the HTTP Reponse Headers and used the "Set Common Hedaers..." to set content to expire immediately. I have no Output Caching profiles set at any level in IIS. I clear my browser cache then try accessing my site. When my site requests a PNG file, I see responses like: Accept-Ranges bytes Age 0 Connection Keep-Alive Content-Type image/png Date Thu, 12 Apr 2012 21:55:15 GMT Etag "83b7322de318cd1:0" Last-Modified Thu, 12 Apr 2012 19:33:45 GMT Server Microsoft-IIS/7.5 X-Powered-By ASP.NET For JS and CSS files, I see responses like: Accept-Ranges bytes Cache-Control no-cache Connection Keep-Alive Content-Encoding gzip Content-Length 597 Content-Type text/css Date Thu, 12 Apr 2012 21:55:15 GMT Etag "06e45ede15bca1:0" Last-Modified Mon, 02 Nov 2009 17:28:44 GMT Server Microsoft-IIS/7.5 Vary Accept-Encoding X-Powered-By ASP.NET Accept-Ranges bytes Cache-Control no-cache Connection Keep-Alive Content-Encoding gzip Content-Length 42060 Content-Type application/x-javascript Date Thu, 12 Apr 2012 21:55:14 GMT Etag "2356302de318cd1:0" Last-Modified Thu, 12 Apr 2012 19:33:45 GMT Server Microsoft-IIS/7.5 Vary Accept-Encoding X-Powered-By ASP.NET So, why are my PNGs able to be cached, but JS and CSS files not? Then, I go into the Output Caching feature in IIS and set up profiles for .png, .css, and .js files. This updates the web.config file as follows: <caching> <profiles> <add extension=".png" policy="CacheUntilChange" kernelCachePolicy="DontCache" /> <add extension=".css" policy="CacheUntilChange" kernelCachePolicy="DontCache" /> <add extension=".js" policy="CacheUntilChange" kernelCachePolicy="DontCache" /> </profiles> </caching> I do a "precautionary" IISReset then try accessing my site again. For PNG files, I see the following response: Accept-Ranges bytes Age 0 Connection Keep-Alive Content-Length 3833 Content-Type image/png Date Thu, 12 Apr 2012 22:02:30 GMT Etag "0548c9e2c5dc81:0" Last-Modified Tue, 22 Jan 2008 19:26:00 GMT Server Microsoft-IIS/7.5 X-Powered-By ASP.NET For CSS and JS files, I see the following responses: Accept-Ranges bytes Cache-Control no-cache,no-cache Connection Keep-Alive Content-Encoding gzip Content-Length 2680 Content-Type application/x-javascript Date Thu, 12 Apr 2012 22:02:29 GMT Etag "0f743af9015c81:0" Last-Modified Tue, 23 Oct 2007 16:20:54 GMT Server Microsoft-IIS/7.5 Vary Accept-Encoding X-Powered-By ASP.NET Accept-Ranges bytes Cache-Control no-cache,no-cache Connection Keep-Alive Content-Encoding gzip Content-Length 3831 Content-Type text/css Date Thu, 12 Apr 2012 22:02:29 GMT Etag "c3f42d2de318cd1:0" Last-Modified Thu, 12 Apr 2012 19:33:45 GMT Server Microsoft-IIS/7.5 Vary Accept-Encoding X-Powered-By ASP.NET What am I doing wrong? Have I completely misunderstood the features of IIS, or is there a bug. Most importantly, how do I achieve what I want - that is get the browser to cache only PNG, JS and CSS files?

    Read the article

  • How to specify this 'symbolic link' for the Jungo WinDriver?

    - by user252098
    Just now , I try to install the Jungo WinDriver in the Ubuntu 13.10 . But I am puzzled by the its manual : 4.2.3. Linux WinDriver Installation Instructions 4.2.3.1. Preparing the System for Installation In Linux, kernel modules must be compiled with the same header files that the kernel itself was compiled with. Since WinDriver installs kernel modules, it must compile with the header files of the Linux kernel during the installation process. Therefore, before you install WinDriver for Linux, verify that the Linux source code and the file version.h are installed on your machine: Install the Linux kernel source code: If you have yet to install Linux, install it, including the kernel source code, by following the instructions for your Linux distribution. If Linux is already installed on your machine, check whether the Linux source code was installed. You can do this by looking for 'linux' in the /usr/src directory. If the source code is not installed, either install it, or reinstall Linux with the source code, by following the instructions for your Linux distribution. Install version.h: The file version.h is created when you first compile the Linux kernel source code. Some distributions provide a compiled kernel without the file version.h. Look under /usr/src/linux/include/linux to see whether you have this file. If you do not, follow these steps: Become super user: $ su Change directory to the Linux source directory: cd /usr/src/linux Type: make xconfig Save the configuration by choosing Save and Exit. Type: make dep Exit super user mode: exit To run GUI WinDriver applications (e.g., DriverWizard [5]; Debug Monitor [7.2]) you must also have version 5.0 of the libstdc++ library — libstdc++.so.5. If you do not have this file, install it from the relevant RPM in your Linux distribution (e.g., compat-libstdc++). Before proceeding with the installation, you must also make sure that you have a linux symbolic link. If you do not, create one by typing /usr/src$ ln -s 'target kernel'/linux For example, for the Linux 2.4 kernel type /usr/src$ ln -s linux-2.4/ linux ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I can't understand how to specify these two parameters in my Ubuntu .

    Read the article

  • Disable scroll acceleration (windows/lenovo)

    - by dhardy
    Exactly the opposite of http://superuser.com/questions/101482/global-scroll-acceleration-in-windows, is there a way to disable scroll-accelartion on windows (touchpad -- maybe from lenovo drivers). It's heck of annoying -- using no accelartion but high sensitivity like on linux is so much more precise. ( With this silly acceleration, I either have incredibly slow scrolling, or scrolling so fast it skips whole chunks of text at once. Speed control but not acceleration control. Could say the same for mouse cursor, though that's less annoying. )

    Read the article

  • iTunes video black screen until select computer output

    - by Daniel Huckstep
    I don't remember this happening before, but now whenever I play any video in iTunes (podcast video, movie, TV show, iTunes extras stuff but the menus work) it just shows a black screen with the sound playing. If I stop it, select "Computer" in the little output control on the iTunes video control panel that pops up, then play again, it works fine. What the heck? Tried rebooting, updating, with and without external monitor. OSX 10.6.6

    Read the article

  • How should I choose my DNS?

    - by Jader Dias
    When I have to choose my DNS I think that I should consider: Speed Reliability Privacy Control (reports and stats) The main options that come to my mind, and how I weigh them according to the above factors, are: My ISP = faster (closer to me) but less privacy (they can associate my DNS requests to myself) OpenDNS and such = more control and more privacy (all they have is one of my e-mail addresses) Google = less privacy (they can associate my DNS requests to my Google Account and my searches) What weighting factors, or other options, have I missed?

    Read the article

  • Screen Snip/Capture Utility callable from API or command line?

    - by Raymond
    I am looking for a screen capture tool that is controllable from the command line. Ideally I would pass the filename, and possibly some options (capture mouse pointer or not, etc..), then it would take control, allow the user to select a region of the screen, and then save it to the specified file and disappear. screensnip.exe /output c:\users\public\pictures\screenshot.png /hidecursor user draws rectangle on screen control passes back to batch file, script, etc....

    Read the article

  • Emacs and windows manager keyboard shortcuts without Win key

    - by Little Bobby Tables
    I found a classic M-Series keyboard and I want to use it. However, it does not have the "Windows" key (a.k.a "Super"), only the Shift, Control and Alt modifiers. My keyboard shortcuts are cluttered as-is, since that I try to control both Emacs and the windows manager (Gnome) only from the keyboard. I rely on the "Super" key to identify the windows manager shortcuts. What it the best practice for keyboard-centric work without the "Super" key?

    Read the article

  • Do I still need to send the "Expires" header, or can I assume that web caches understand "Cache-Cont

    - by chris_l
    I want to reduce the overhead caused by HTTP headers to a minimum, so I'd like to avoid the "Expires" header, and use "Cache-Control" only - or maybe the other way around (I'm planning to send very short HTTP responses to browsers, so the answer to this question doesn't fully apply here: My headers account for a significant percentage). AFAIK, the "Cache-Control" header was standardized in HTTP 1.1, but are there still web caches/proxies, that don't understand it? Note: This is a sub-question to my stackoverflow (bounty) question

    Read the article

  • Opening Python in CMD (Unfixable Error)

    - by Robert
    I recently tried opening one of my Python projects with CMD to see what would happen. The result did nothing amazing, but Windows 7 thought I wanted to open .py files in CMD all the time. I have tried everything, setting it back to python.exe does not work, I even went to Control Panel to see if it could help, but Control Panel couldn't help either. So if someone could help me please that would be great. Thank you.

    Read the article

  • lshw tells me my processor is a 64 bits but my motherboard has a 32 bits width

    - by bpetit
    Recently I noticed lshw tells me a strange thing. Here is the first part of my lshw output: bpetit-1025c description: Notebook product: 1025C (1025C) vendor: ASUSTeK COMPUTER INC. version: x.x serial: C3OAAS000774 width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=Eee PC... *-core description: Motherboard product: 1025C vendor: ASUSTeK COMPUTER INC. physical id: 0 version: x.xx serial: EeePC-0123456789 slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 1025C.0701 date: 01/06/2012 size: 64KiB capacity: 1984KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd... *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2800 @ 1.86GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 798MHz capacity: 1865MHz width: 64 bits clock: 533MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc ... configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 1066 MHz (0.9 ns) product: SSZ3128M8-EAEEF vendor: Xicor physical id: 1 serial: 00000004 slot: DIMM1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 798MHz capacity: 798MHz capabilities: ht cpufreq configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical So here I see my processor is effectively a 64 bits one. However, I'm wondering how my motherboard can have a "32 bits width". I've browsed the web to find an answer, without success. I imagine it's just a technical fact that I don't know about. Thanks.

    Read the article

  • Extracting a SQLCLR assembly

    - by Ed Leighton-Dick
    One of our in-house applications has a SQLCLR assembly which is currently experiencing problems. The developer is having problems recreating the issue using the version that is stored in our source control system, so he suspects that some code may have been released that was not uploaded to source control. Is there a way to extract a SQLCLR assembly into a .dll file so that he can reverse engineer it for analysis?

    Read the article

  • nginx rewrite for /blah/(.*) /$1

    - by skrewler
    I'm migrating from mod_php to nginx. I got everything working except for this rewrite.. I'm just not familiar enough with nginx configuration to know the correct way to do this. I came up with this by looking at a sample on the nginx site. server { server_name test01.www.myhost.com; root /home/vhosts/my_home/blah; access_log /var/log/nginx/blah.access.log; error_log /var/log/nginx/blah.error.log; index index.php; location / { try_files $uri $uri/ @rewrites; } location @rewrites { rewrite ^ /index.php last; rewrite ^/ht/userGreeting.php /js/iFrame/index.php last; rewrite ^/ht/(.*)$ /$1 last; rewrite ^/userGreeting.php$ /js/iFrame/index.php last; rewrite ^/a$ /adminLogin.php last; rewrite ^/boom\/(.*)$ /boom/index.php?q=$1 last; rewrite ^favicon.ico$ favico_ry.ico last; } # This block will catch static file requests, such as images, css, js # The ?: prefix is a 'non-capturing' mark, meaning we do not require # the pattern to be captured into $1 which should help improve performance location ~* \.(?:ico|css|js|gif|jpe?g|png)$ { # Some basic cache-control for static files to be sent to the browser expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; } include php.conf; } The issue I'm having is with this rewrite: rewrite ^ht\/(.*)$ /$1 last; 99% of requests that will hit this rewrite are static files. So I think maybe it's getting sent to the static files section and that's where things are being messed up? I tried adding this but it didn't work: location ~* ^ht\/.*\.(?:ico|css|js|gif|jpe?g|png)$ { # Some basic cache-control for static files to be sent to the browser expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; } Any help would be appreciated. I know the best thing to do would be to just change the references of /ht/whatever.jpg to /whatever.jpg in the code.. but that's not an option for now.

    Read the article

  • How to improve Varnish performance?

    - by Darkseal
    We're experiencing a strange problem with our current Varnish configuration. 4x Web Servers (IIS 6.5 on Windows 2003 Server, each installed on a Intel(R) Xeon(R) CPU E5450 @ 3.00GHz Quad Core, 4GB RAM) 3x Varnish Servers (varnish-3.0.3 revision 9e6a70f on Ubuntu 12.04.2 LTS - 64 bit/precise, Kernel Linux 3.2.0-29-generic, each installed on a Intel(R) Xeon(R) CPU E5450 @ 3.00GHz Quad Core, 4GB RAM) The Varnish Servers performance are awfully bad in general, to the point that if we shut down one of them the other two are unable to fullfill all the requests and start to skip beats resulting in pending requests, timeouts, 404, etc. What can we do to improve our Varnish performance? Considering that we're getting less than 5k request per seconds during our max peak, we should be able to serve our pages even with a single one of them without any problem. We use a standard, vanilla CFG, as shown by this varnishadm param.show output: acceptor_sleep_decay 0.900000 [] acceptor_sleep_incr 0.001000 [s] acceptor_sleep_max 0.050000 [s] auto_restart on [bool] ban_dups on [bool] ban_lurker_sleep 0.010000 [s] between_bytes_timeout 60.000000 [s] cc_command "exec gcc -std=gnu99 -g -O2 -pthread -fpic -shared - Wl,-x -o %o %s" cli_buffer 8192 [bytes] cli_timeout 20 [seconds] clock_skew 10 [s] connect_timeout 0.700000 [s] critbit_cooloff 180.000000 [s] default_grace 10.000000 [seconds] default_keep 0.000000 [seconds] default_ttl 120.000000 [seconds] diag_bitmap 0x0 [bitmap] esi_syntax 0 [bitmap] expiry_sleep 1.000000 [seconds] fetch_chunksize 128 [kilobytes] fetch_maxchunksize 262144 [kilobytes] first_byte_timeout 60.000000 [s] group varnish (113) gzip_level 6 [] gzip_memlevel 8 [] gzip_stack_buffer 32768 [Bytes] gzip_tmp_space 0 [] gzip_window 15 [] http_gzip_support off [bool] http_max_hdr 64 [header lines] http_range_support on [bool] http_req_hdr_len 8192 [bytes] http_req_size 32768 [bytes] http_resp_hdr_len 8192 [bytes] http_resp_size 32768 [bytes] idle_send_timeout 60 [seconds] listen_address :80 listen_depth 1024 [connections] log_hashstring on [bool] log_local_address off [bool] lru_interval 2 [seconds] max_esi_depth 5 [levels] max_restarts 4 [restarts] nuke_limit 50 [allocations] pcre_match_limit 10000 [] pcre_match_limit_recursion 10000 [] ping_interval 3 [seconds] pipe_timeout 60 [seconds] prefer_ipv6 off [bool] queue_max 100 [%] rush_exponent 3 [requests per request] saintmode_threshold 10 [objects] send_timeout 600 [seconds] sess_timeout 5 [seconds] sess_workspace 16384 [bytes] session_linger 50 [ms] session_max 100000 [sessions] shm_reclen 255 [bytes] shm_workspace 8192 [bytes] shortlived 10.000000 [s] syslog_cli_traffic on [bool] thread_pool_add_delay 2 [milliseconds] thread_pool_add_threshold 2 [requests] thread_pool_fail_delay 200 [milliseconds] thread_pool_max 2000 [threads] thread_pool_min 5 [threads] thread_pool_purge_delay 1000 [milliseconds] thread_pool_stack unlimited [bytes] thread_pool_timeout 300 [seconds] thread_pool_workspace 65536 [bytes] thread_pools 2 [pools] thread_stats_rate 10 [requests] user varnish (106) vcc_err_unref on [bool] vcl_dir /etc/varnish vcl_trace off [bool] vmod_dir /usr/lib/varnish/vmods waiter default (epoll, poll) This is our default.vcl file: LINK sub vcl_recv { # BASIC recv COMMANDS: # # lookup -> search the item in the cache # pass -> always serve a fresh item (no-caching) # pipe -> like pass but ensures a direct-connection with the backend (no-cache AND no-proxy) # Allow the backend to serve up stale content if it is responding slow. # This defines when Varnish should use a stale object if it has one in the cache. set req.grace = 30s; if (client.ip == "127.0.0.1") { # request from NGINX - do not alter X-Forwarded-For set req.http.HTTPS = "on"; } else { # Add an X-Forwarded-For to keep track of original request unset req.http.HTTPS; unset req.http.X-Forwarded-For; set req.http.X-Forwarded-For = client.ip; } set req.backend = www_director; # Strip all cookies to force an anonymous request when the back-end servers are down. if (!req.backend.healthy) { unset req.http.Cookie; } ## HHTP Accept-Encoding if (req.http.Accept-Encoding) { if (req.http.Accept-Encoding ~ "gzip") { set req.http.Accept-Encoding = "gzip"; } else if (req.http.Accept-Encoding ~ "deflate") { set req.http.Accept-Encoding = "deflate"; } else { unset req.http.Accept-Encoding; } } if (req.request != "GET" && req.request != "HEAD" && req.request != "PUT" && req.request != "POST" && req.request != "TRACE" && req.request != "OPTIONS" && req.request != "DELETE") { /* non-RFC2616 or CONNECT */ return (pipe); } if (req.request != "GET" && req.request != "HEAD") { /* only deal with GET and HEAD by default */ return (pass); } if (req.http.Authorization) { return (pass); } if (req.http.HTTPS ~ "on") { return (pass); } ###################################################### # COOKIE HANDLING ###################################################### # METHOD 1: do not remove cookies, but pass the page if they contain TB_NC if (!(req.url ~ "(?i)\.(png|gif|ipeg|jpg|ico|swf|css|js)(\?[a-z0-9]+)?$")) { if (req.http.Cookie && req.http.Cookie ~ "TB_NC") { return (pass); } } return (lookup); } # Code determining what to do when serving items from the IIS Server sub vcl_fetch { unset beresp.http.Server; set beresp.http.Server = "Server-1"; # Allow items to be stale if needed. This is the maximum time Varnish should keep an object. set beresp.grace = 1h; if (req.url ~ "(?i)\.(png|gif|ipeg|jpg|ico|swf|css|js)(\?[a-z0-9]+)?$") { unset beresp.http.set-cookie; } # Default Varnish VCL logic if (!beresp.cacheable || beresp.ttl <= 0s || beresp.http.Set-Cookie || beresp.http.Vary == "*") { set beresp.ttl = 120 s; return(hit_for_pass); } # Not Cacheable if it has specific TB_NC no-caching cookie if (req.http.Cookie && req.http.Cookie ~ "TB_NC") { set beresp.http.X-Cacheable = "NO:Got Cookie"; set beresp.ttl = 120 s; return(hit_for_pass); } # Not Cacheable if it has Cache-Control private else if (beresp.http.Cache-Control ~ "private") { set beresp.http.X-Cacheable = "NO:Cache-Control=private"; set beresp.ttl = 120 s; return(hit_for_pass); } # Not Cacheable if it has Cache-Control no-cache or Pragma no-cache else if (beresp.http.Cache-Control ~ "no-cache" || beresp.http.Pragma ~ "no-cache") { set beresp.http.X-Cacheable = "NO:Cache-Control=no-cache (or pragma no-cache)"; set beresp.ttl = 120 s; return(hit_for_pass); } # If we reach to this point, the object is cacheable. # Cacheable but with not enough ttl: we need to extend the lifetime of the object artificially # NOTE: Varnish default TTL is set in /etc/sysconfig/varnish # and can be checked using the following command: # varnishadm param.show default_ttl else if (beresp.ttl < 1s) { set beresp.ttl = 5s; set beresp.grace = 5s; set beresp.http.X-Cacheable = "YES:FORCED"; } # Cacheable and with valid TTL. else { set beresp.http.X-Cacheable = "YES"; } # DEBUG INFO (Cookies) # set beresp.http.X-Cookie-Debug = "Request cookie: " + req.http.Cookie; return(deliver); } sub vcl_error { set obj.http.Content-Type = "text/html; charset=utf-8"; if (obj.status == 404) { synthetic {" <!-- Markup for the 404 page goes here --> "}; } else if (obj.status == 500) { synthetic {" <!-- Markup for the 500 page goes here --> "}; } else if (obj.status == 503) { if (req.restarts < 4) { return(restart); } else { synthetic {" <!-- Markup for the 503 page goes here --> "}; } } else { synthetic {" <!-- Markup for a generic error page goes here --> "}; } } sub vcl_deliver { if (obj.hits > 0) { set resp.http.X-Cache = "HIT"; } else { set resp.http.X-Cache = "MISS"; } } Thanks in advance,

    Read the article

< Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >