Search Results

Search found 71031 results on 2842 pages for 'windows search'.

Page 402/2842 | < Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >

• Get the wireless adapter frequency-band mode in Windows 7

  - by Petr

  I have a dual-band 802.11n router operating in both frequency bands with the same SSID. My Windows 7 laptop has a dual-band wireless adapter. Is there a way to find out which frequency band is the one currently used by the client? Also, is there a way to set the preffered band? Thanks. EDIT1: The router is Linksys E4200 (V2) and I essentially want to keep the 2.4GHz band in the mixed-mode so that the legacy 802.11g devices can connect while allocating the 5.0GHz band for 802.11n devices. The laptop's adapter (Intel Centrino Ultimate-N 6300 ANG) can operate in both 802.11n modes. EDIT2: Related topic

  Read the article

• Windows Home Server Passwords Do Not Match

  - by Ben Fulton

  I have a Windows Home Server that chunks along just fine most of the time. I've never bothered to put it on a UPS and so it's vulnerable to power outages that happen a few times a year. This most recent time, it came back and seemed to be fine, but whenever I try to access a shared folder I get "Passwords do not match". They matched before the power went out, and I couldn't update the WHS password since I apparently didn't know the old one. How do I fix this? (I asked this on ServerFault and they recommended it be asked here instead)

  Read the article

• Windows 2008 VPS always crashes when out of disk space

  - by Pickels

  Hello, I am renting a Windows server 2008 dc SP2 VPS for hosting my Asp.Net projects. Now for the second time this month my VPS ran out of disk space. The first time it was a log file that got to big and yesterday it was my mistake for uploading a website without noticing the lack of space on my VPS. Now the side effect this has is that my VPS corrupts some files when trying to write them. Last time it was Plesk that stopped working yesterday it was IIS. So I was wondering is this normal behavior? I called my service provider to ask if they could restore a back-up and to ask if this is normal and they ensured me it was. I am not trying to blame them and I know it's mostly my fault for not monitoring my VPS better or for not setting better defaults.

  Read the article

• Disable spell checking in Internet Explorer 10 (Windows 8)

  - by Lumi

  I installed the release preview of Windows 8, which comes with Internet Explorer 10. IE10 has been endowed with a spell checking Feature, which is active while I write this text. As a matter of principle, I disable spell checking anywhere I go. I simply hate spell checking. I know better than the spell checker. (And when not it doesn't matter.) This is all the more annoying as I write in several languages and the spell checker only does one language (German, in this case), and then even in the new and wrong spelling, not in the old an true one. How can I disable this?

  Read the article

• Use Port Binding Permissions on Windows

  - by Sharon

  This should be an easy one, but I can't find anything on it. I want to use IIS Express with my local user account to bind to a port on my netbios name. For example, http://computername:1315. My local user account doesn't have permission to do this, but I have administrator access on the machine. Anyone know how to grant permission to my local user account to bind to a port with my computer name instead of localhost? This is on Windows 7.

  Read the article

• What Windows licenses are required to run additional terminal service sessions

  - by John P

  We need to build out a server running Windows 2008 R2 Standard that can allow up to 10 simultaneous RDP/Terminal Services connections and I'm a little confused about how the CAL licenses work. From one source I was told I needed 10 "server CALs" and an additional 10 "RDP CALs" (total of 20 CALs). From another, I was told I just needed the 10 "RDP CALs", which implicitly came with the server CAL. The Microsoft licensing website (http://www.microsoft.com/windowsserver2008/en/us/licensing-rds.aspx) seems to support scenario #1, but it is still not real clear what those server CALs are needed for. Also, can we use the 2 "built-in" RDP clients, meaning we only need to purchase 8 CALs to reach a total of 10?

  Read the article

• PHP + IIS Application Pool Identity Windows\Temp permissions

  - by Matt Boothman

  I am currently running PHP (5.3) on IIS 7.5 on a Win2k8 R2 Web Edition Server and would like to know what, if any, problems or security vulnerabilities I may introduct into a system by assigning Read, Write, Modify & Execute permissions to either IUSR account or the IIS_USERS group for %SystemRoot%\Temp? Should I be altering permissions to that folder at all (as Windows reminds me I probably shouldn't when i attempt to change them)? Should I create a temp folder somewhere else and set permissions accordingly? The problem is when i set Anonymous Authentication (I'm guessing is a more secure option???) to use the App Pool identity, when starting sessions PHP gets stuck in a loop because it's unable to create session files in the %SystemRoot%\Temp folder due to lack of permission on the application pool user or IIS_USERS group. Another problem being ImageMagick (PHP Extension) is being denied access to %SystemRoot%\Temp to write temporary files so is throwing exceptions. I have tried searching Google however have not found anything that touches upon this subject specifically. Any help greatly appreciated.

  Read the article

• Burn Image context menu item missing in Windows 7

  - by Tim Jarvis

  My understanding is that in Windows 7 if I right click an ISO image I should have an option Burn Image, or if I double click an ISO I should get a dialog to let me burn the image.... Not happening for me, any idea's why? Edit: 29th April. I do have isoburn.exe in my system32 directory, and it works just fine if I launch it manually from cmd. However I simply do not have the context menu when I right click on a iso file. So my more specific question is, does anyone know how to simply restore this context menu item, an entry in the registry perhaps? (but where and what)

  Read the article

• Windows 7 Bootcamp to see data doubler SATA SSD in Optical Bay Connector

  - by bumble_bee_tuna

  Hi I purchased a OWC data doubler http://eshop.macsales.com/item/OWC/DDAMBS0GB/ ... Long story short it lets you add a second HD to your macbook pro in place of the cd/dvd drive (which is useless anyway, impossible to get stuff out when stuck). My current setup is 600gb intel SSD bootdrive 100gb partition for OSX / 500gb for Windows 7 Prof from Bootcamp (use 99 % of time). My desire is to have a second 300gb SSD to run disk intensive VM's off of. So I added a second 300gb intel SSD (again, NO desire to boot off of) on the sata optical port. I can see the drive no problem if I boot in to OSX, however, can't see it in disk management on Win7 ??? Any ideas similar experience ... Funny thing is I can see it in "Device Manager Disk Drivers" but not Disk Management ??? Also no I don't want to use Fusion/Parallels this is a waste of resources for me.

  Read the article

• Switch monitor configurations on Windows 7

  - by Horst Walter

  I use one of my PCs for flight simulation as well as for home theater. In case one it has 2 monitors attached, and in case 2 (home theater) a HD TV is being used. All 3 monitors are attached at the same time to the graphics card. How could it best switch best between different configurations. In case 1 I'd like to have the configuration with monitor 1/2, alternatively I'd like quickly to switch to another config only with the HD TV as primary screen. A similar question has been asked 6 months back with no full solution yet, so I come up with it again. The comment there of Darius (Windows + P key) is the best so far.

  Read the article

• How to prevent Windows Home server waking for backup

  - by Andronicus

  Since changing the motherboard in my Windows home server it has been switching itself on every night to perform a scheduled backup. I don't want this to happen though, I want to switch the server on using Wake on lan, but I want to manually perform backups if/when required. I know I can disable backups of each computer, and the machine wont turn on, but I want to allow manually triggered backups, or automatic backups if the homeserver is on, but if its in sleep mode, I wish it to stay in that state unless I wake it. How can this be achieved?

  Read the article

• Windows Server 2008 R2 backup includes volume with MSSQL data

  - by J F

  I'm using wbadmin to schedule image backup every night on a Windows Server 2008 R2 Standard server. Ever since installing MS-SQL 2008 Express R2, wbadmin wants to also backup the volume where the MS-SQL data files are located (L:). I'm using -allCritical to make sure bare metal restore will work. command-line: wbadmin start backup -backupTarget:\\myserver\backup$\myserver\%DATE% -include:C: -allCritical -quiet I don't want to do this, because I'm backing up MS-SQL manually elsewhere. It worked just fine only taking C: before I installed MS-SQL.

  Read the article

• Windows Server 2008 R2 DNS Server not working?

  - by wolfvilleian

  I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

  Read the article

• Eventlog entry for allowed connection in Windows Firewall

  - by Jaap

  I was seeing a lot of entries in the eventlog: The Windows Filtering Platform has permitted a connection. Application Information: Process ID: 4 Application Name: System Network Information: Direction: Inbound Source Address: 10.xxx.xxx.xxx Source Port: 80 Destination Address: 10.xxx.xxx.xxx Destination Port: 31773 Protocol: 6 Filter Information: Filter Run-Time ID: 67903 Layer Name: Receive/Accept Layer Run-Time ID: 44 We have a loadbalancer which checks every second to see if the application is still running (a health check). The logs contain large amounts of this kind of entries, which makes the Event Viewer slow and it's difficult to find the more interesting logs. How do I make sure these messages don't end up in the event logs?

  Read the article

• How can I get Windows 7 to remember program windows size and position?

  - by Ben

  I can open Outlook and it fills about half of the screen. I then maximize it to read some mail and then minimize it to do some other work. When I click on it again in the taskbar, it is back to the original size that it opened at. I have tried Ctrl-close and Ctrl-maximize but neither seems to work. This also happens with Explorer windows, AutoCAD, Revit, and other programs that I work with. Shouldn't a minimize and a maximize bring the window back to the last size and position?

  Read the article

• Windows application shortcut icon cannot be removed

  - by Claudiu Constantin

  I recently installed an application on my Windows 7 desktop. After the install this application created a strange icon on my desktop which cannot be removed/deleted or renamed. I find this quite intrusive and I keep wondering if this is a normal/legal case... Is an application allowed to do this? I don't remember having an option to allow this "Chuck Norris" icon on my desktop. Any information on this will be highly appreciated. Edit: What this icon does is when you drag over a file it applies some "deep removal" of it. It's context menu is limited to "Open" (which does nothing) and "Create shortcut"

  Read the article

• How to access Windows Registry from DOS

  - by SEARAS

  How to access Windows Registry from DOS? I need to access registry from DOS, while I boot from DOS bootable disk. I've searched all the internet, and found only Offline NT Password and Registry Editor, which can not be used in DOS, as I understand. Also I've found RegView (from many mirrors), which isn't working too (I've tried many instructions). Is there any easy-in-usage tool, like reg.exe, which is able to load registry hives, so that I can change registry values?? Or any working instructions ?? Note: I already have a bootable drive, which can read/write to NTFS drives. Thanks in advance!

  Read the article

• emacs and putty on windows 7

  - by twilbrand

  My workstation was recently updated to Windows 7. I've downloaded putty and have configured it to the same settings I had under Vista. Whenever I ssh to a vm running Centos 5.4 and try to run emacs on a file, I'm getting an error about a connection to an X server: [ecto1 ~]$ emacs foo.bar Connection lost to X server `localhost:10.0' I never received this error message when I had Vista. I can get around it by aliasing emacs to 'emacs -nw', but I don't feel that I should have to do this. My co-worker has the same hardware that had the same upgrade and his sessions do not seem to be doing this. Any advice? I can't find anything on google and don't know where else to start. [ecto1 ~]$ emacs -version GNU Emacs 21.4.1

  Read the article

• Windows 7 freezing unexpectedly

  - by Thomas Deutsch

  I have a Windows 7 computer here, which is freezing between 2 times a day and 1 time every second day. I see no problem, no special drivers, no special Apps are open, no encryption or something like that. Apps usually open then are Firefox, Thunderbird, Eclipse and maybe Office. Computer is just freezing. No Reboot, no shutdown, no bluescreen and no error. User has to hardreset it. Eventlog shows me an kernel error saying it has been unexpected rebooted due to an fatal error, but no statement about what kind of error happended. Anyone an idea what it can be? Chkdisk should be ok (currently, I run it a second time).

  Read the article

• IPv6 6to4 on Windows Server

  - by Graham Wager

  I'm looking for a relatively simple guide to setting up an IPv6 tunnel properly. This network currently has a server (Windows Server 2008R2) running RRAS that establishes connectivity to the internet using a demand-dial PPPoE connection and handles the NAT. It also hosts a DNS server and DHCP. My ISP does not support IPv6, but I have a static IPv4 address. I've read about 6to4 and signed up at tunnelbroker.net, but quickly felt out of my depth. How do I configure my network to use it, and how I should configure my DHCP server with regards to IPv6 addresses?

  Read the article

• Ping from windows 7 get no reply but sets errorlevel to 0

  - by Doron

  From a Windows 7 machine, I ping an IP address of a turned-off machine. C:\>ping 192.168.1.222 Pinging 192.168.1.222 with 32 bytes of data: Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Ping statistics for 192.168.1.222: Packets: Sent = 3, Received = 3, Lost = 0 (0% loss) Even though there is no reply, the errorlevel is set to 0. What I am trying to do, is figure out if a remote machine is replying to ping. One of my tests is to turn off the machine and ping it. For some reason, ping sets errorlevel to 0.

  Read the article

• SQL Management Studio is painfully slow on 32-bit Windows 7

  - by Sergei

  I've been having issues running anything in SQL Management Studio on Win 7. Basically, doing anything through the Management Studio interfaces completely freezes it up for a few minutes. Running a query is nearly impossible because it takes nearly 2 minutes just for the IDE to parse it and another minute to run it when the query itself completes instantaneously outside of the IDE. I'm not even going to go into the query designer. Anything with heavy user interaction such as editing a row in the result set where i have to click a cell freezes up the front-end. I tried reinstalling to no avail. Also tried running in compatibility mode without any difference whatsoever. Anybody had a similar experience? I'm running SQL Management Studio 2008 version 10.0.2531.0 on 32-bit Windows 7. Connecting to a remote SQL Server instance (2008 R2). Thanks.

  Read the article

• IBM x226 server with Windows 2003 freezing and showing one HDD degraded

  - by Zvonko Telefonko

  We have an IBM x226 server with Windows 2003 running on it. For weeks it's been very slow and it freezes at least once each day. At the boot it show message "degraded" for one HDD and optimal for other HDDs. We have 4 HDDs in it set up in Raid 1. HDD 1 - HDD 2, HDD 3 - HDD4. It seems that HDD2 is the one who is causing problems (showing degraded status). There's an amber led blinking on it together with the green one. We installed ServerRAID manager downloaded from IBM and it gave us option for "rebuild". But the server froze at some point and now it's rebuilding from start again. I've done some Googling and it says that it could be to failing HDD or some cache battery. How can we verify what is the cause of this?

  Read the article

• Windows Server 2003 (as workstation) unable to write to Samba fileshares

  - by remyhorton

  Setup is a Samba fileserver under Linux, which i am trying to access from a Windows Server 2003 box which has been reconfigured as a workstation. I can log onto the fileshares and can copy/delete files, but trying to open a file then write to it fails. Renaming files also fails with an error about requiring a filename. Drag/dropping files onto Xemacs gives me a message about copying from the network zone, and once open the file is read-only. Any ideas of what is wrong? I suspect it is a miscommunication of security details, as folder security options are all unchecked (checking them has no effect). I know it is not a problem with Samba itself, as Window2000, WindowsXP, and Nautulas (under Linux) can all access/edit fileshare files fine using the same userid/password. I am not using domain logins.

  Read the article

• HOWTO Catch/Redirect all outgoing e-mails from webapp on Windows Server 2003

  - by John

  As suggested by another member, I have split the original post into two. To see the original post, go to http://serverfault.com/questions/134595/howto-catch-redirect-all-outgoing-e-mails-on-win2k-and-redhat-enterprise. For this question, please keep your answers specific to Windows Server 2003 only. Thanks for the help in advance. Background: I am integrating two separate web application that are developed in ASP .NET and JSP/Struts. As such, they are hosted on two different server technologies, namely Win2K3 and Redhat Enterprise Server 5.5. Problem: There is a copy of production data in my test environment with real e-mail addresses. I need to test the e-mail functionality of these applications, but I do not want them to send out actual e-mails. Is there a way to catch and redirect all outgoing e-mails? Ideally, I would like to send all outgoing e-mails to another e-mail (i.e., [email protected]) so my testers can look at them.

  Read the article

< Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >