Search Results

Search found 18028 results on 722 pages for 'atomic values'.

Page 405/722 | < Previous Page | 401 402 403 404 405 406 407 408 409 410 411 412  | Next Page >

  • Function for building an isosurface (a sphere cut by planes)

    - by GameDevEnthusiast
    I want to build an octree over a quarter of a sphere (for debugging and testing). The octree generator relies on the AIsosurface interface to compute the density and normal at any given point in space. For example, for a full sphere the corresponding code is: // returns <0 if the point is inside the solid virtual float GetDensity( float _x, float _y, float _z ) const override { Float3 P = Float3_Set( _x, _y, _z ); Float3 v = Float3_Subtract( P, m_origin ); float l = Float3_LengthSquared( v ); float d = Float_Sqrt(l) - m_radius; return d; } // estimates the gradient at the given point virtual Float3 GetNormal( float _x, float _y, float _z ) const override { Float3 P = Float3_Set( _x, _y, _z ); float d = this->AIsosurface::GetDensity( P ); float Nx = this->GetDensity( _x + 0.001f, _y, _z ) - d; float Ny = this->GetDensity( _x, _y + 0.001f, _z ) - d; float Nz = this->GetDensity( _x, _y, _z + 0.001f ) - d; Float3 N = Float3_Normalized( Float3_Set( Nx, Ny, Nz ) ); return N; } What is a nice and fast way to compute those values when the shape is bounded by a low number of half-spaces?

    Read the article

  • New 2.5" hard drive for laptop - What to compare?

    - by TFM
    I'm having trouble finding a new (bigger) hard drive for my laptop. I came across some criteria that I never thought about before, while I was checking a price comparison site. Of course, that made me more confused. First of all, I will probably go with something above 250 GB, and at least 16 MB cache. Now the confusing part: Most new drives are 7200 RPM, as opposed to good old 5400 RPM. 7200 RPM used to mean extra heat, but suddenly it's almost impossible to find a 5400 RPM in 2.5". What did I miss? Second question: Internal data transfer rate. My old drive has a rate of around 60 MB, but new drives have values like 100 MB or more (e.g. 150 MB). How important is this "internal data transfer rate"?

    Read the article

  • Excel: Find a specific cell and paste the value from a control cell into it

    - by G-Edinburgh
    I have two columns one containing the room number, e.g. B-CL102, the other containing a varying integer. I want to enter a different, manually determined, integer in a third column. Whether by macro or native Excel, is there a way to use two control cells at the top of the sheet, type the room number into one and the different integer matching that room into another. I have minimal experience with macros essentially just the basics. I tried to use a V-Lookup formula to look at the two control cells (Range) and then fill in the new column, however I don't know how to then fix that value so that it doesn't change when I change the values in the control cells.

    Read the article

  • Excel axis problem

    - by itid
    I am graphing the height above sea level obtained by GPS at 12 measuring stations, which are distributed along a straight line but NOT equidistantly. Excel does a nice job of creating a suitable Y axis. But, it insists on placing the 12 stations equidistantly along the X axis. Consequently, the line graph does not represent the true cross section of the terrain. It is only true at the stations themselves. Surely there must be a way that I can enter the actual distances between the stations into a column, and get Excel to read from that column and space the values accordingly? It is such a basic mapping procedure for geologists and many others. Thanks

    Read the article

  • I am trying to link my php form and my sql but having difficulties

    - by user1912599
    I am not sure what I am doing wrong as far as my php goes but I can't get my form to link with my sql. Here are the codes for my form and php code for my link to sql <?php echo displayform(); function displayForm() { $r = ''; //build it $r .='<form action="database.php" method="post">'; //table $r .=displayNiceFormBegin(); $r .=displayRow('FirstName:', '<input type="text" name="fname" id="fname"/>'); $r .=displayRow('LastName:', '<input type="text" name="lname" id="lname"/>'); $r .=displayRow('Address:', '<input type="text" name="address" id ="address"/>'); $r .=displayRow('Phone:', '<input type="text" name="phone" id ="phone"/>'); $r .=displayRow('Deparment:', '<input type="text" name="department"id="department"/>'); $r .=displayRow('', '<input type="submit" value="Submit Registration" />'); $r .=displayNiceFormEnd(); $r .='</form>'; return $r; } function displayRow($left, $right) { $r .= ''; //build it $r .='<tr>'; $r .= '<td>' . $left . '</td>'; $r .= '<td>' . $right . '</td>'; $r .='</tr>'; return $r; } function displayNiceFormBegin(){ $r .=''; //build it $r .= '<table style="background-color: beige; border: 1px dashed #999"><tr><td>'; $r .='<table style="margin:10px">'; return $r; } function displayNiceFormENd() { $r .=''; //build it $r .='</table>'; $r .='</td></tr><table>'; return $r; } ?> <?php $host="localhost"; // Host name $username="695788_ogems"; // Mysql username $password="opd69715"; // Mysql password $db_name="ottawaglandorfems_zzl_ogems"; // Database name $tbl_name=".*"; // Table name // Connect to server and select database. mysql_connect("$host", "$username", "$password")or die("cannot connect"); mysql_select_db("$db_name")or die("cannot select DB"); // Get values from form $fname=$_POST['fname']; $lname=$_POST['lname']; $address=$_POST['address']; $phone=$_POST['phone']; $department=$_POST['deparment']; // Insert data into mysql $sql="INSERT INTO $tbl_name(FirstName,LastName,Address,Phone,Department)VALUES('$fname', '$lname', '$address','$phone','$deparment')"; $result=mysql_query($sql); // if successfully insert data into database, displays message "Successful". if($result){ echo "Successful"; echo "<BR>"; echo "<a href='ottawa-glandorfems.org/form3.php'>Back to main page</a>"; } else { echo "ERROR"; } ?> <?php // close connection mysql_close(); ?> I keep getting an error. Thank you!!!!

    Read the article

  • Why does WPF Style to show validation errors in ToolTip work for a TextBox but fails for a ComboBox?

    - by Mike B
    I am using a typical Style to display validation errors as a tooltip from IErrorDataInfo for a textbox as shown below and it works fine. <Style TargetType="{x:Type TextBox}"> <Style.Triggers> <Trigger Property="Validation.HasError" Value="true"> <Setter Property="ToolTip" Value="{Binding RelativeSource={RelativeSource Self}, Path=(Validation.Errors)[0].ErrorContent}"/> </Trigger> </Style.Triggers> </Style> But when i try to do the same thing for a ComboBox like this it fails <Style TargetType="{x:Type ComboBox}"> <Style.Triggers> <Trigger Property="Validation.HasError" Value="true"> <Setter Property="ToolTip" Value="{Binding RelativeSource={RelativeSource Self}, Path=(Validation.Errors)[0].ErrorContent}"/> </Trigger> </Style.Triggers> </Style> The error I get in the output window is: System.Windows.Data Error: 17 : Cannot get 'Item[]' value (type 'ValidationError') from '(Validation.Errors)' (type 'ReadOnlyObservableCollection`1'). BindingExpression:Path=(0)[0].ErrorContent; DataItem='ComboBox' (Name='ownerComboBox'); target element is 'ComboBox' (Name='ownerComboBox'); target property is 'ToolTip' (type 'Object') ArgumentOutOfRangeException:'System.ArgumentOutOfRangeException: Specified argument was out of the range of valid values.Parameter name: index' Oddly it also attempts to make invalid Database changes when I close the window if I change any ComboBox values (This is also when the binding error occurs)!!! Cannot insert the value NULL into column 'EmpFirstName', table 'OITaskManager.dbo.Employees'; column does not allow nulls. INSERT fails. The statement has been terminated. Simply by commenting the style out everyting works perfectly. How do I fix this? Just in case anyone needs it one of the comboBox' xaml follows: <ComboBox ItemsSource="{Binding Path=Employees}" SelectedValuePath="EmpID" SelectedValue="{Binding Path=SelectedIssue.Employee2.EmpID, Mode=OneWay, ValidatesOnDataErrors=True}" ItemTemplate="{StaticResource LastNameFirstComboBoxTemplate}" Height="28" Name="ownerComboBox" Width="120" Margin="2" SelectionChanged="ownerComboBox_SelectionChanged" /> <DataTemplate x:Key="LastNameFirstComboBoxTemplate"> <TextBlock> <TextBlock.Text> <MultiBinding StringFormat="{}{1}, {0}" > <Binding Path="EmpFirstName" /> <Binding Path="EmpLastName" /> </MultiBinding> </TextBlock.Text> </TextBlock> </DataTemplate> SelectionChanged: (I do plan to implement commanding before long but, as this is my first WPF project I have not gone full MVVM yet. I am trying to take things in small-medium sized bites) // This is done this way to maintain the DataContext Integrity // and avoid an error due to an Object being "Not New" in Linq-to-SQL private void ownerComboBox_SelectionChanged(object sender, SelectionChangedEventArgs e) { Employee currentEmpl = ownerComboBox.SelectedItem as Employee; if (currentEmpl != null && currentEmpl != statusBoardViewModel.SelectedIssue.Employee2) { statusBoardViewModel.SelectedIssue.Employee2 = currentEmpl; } }

    Read the article

  • Perl Scripts Seem to be Caching?

    - by Ben Liyanage
    I'm running a perl script via mod_perl with Apache. I am trying to parse parameters in a restful fashion (aka GET www.domain.com/rest.pl/Object/ID). If I specify the ID like this: GET www.domain.com/rest.pl/Object/1234 I will get object 1234 back as a result as expected. However, if I specify an incorrect hacked url like this GET www.domain.com/rest.pl/Object/123 I will also get back object 1234. I am pretty sure that the issue in this question is happening so I packaged up my method and invoked it from my core script out of the package. Even after that I am still seeing the threads returning seemingly cached data. One of the recommendations in the aforementioned article is to replace my with our. My impression from reading up on our vs my was that our is global and my is local. My assumption is the the local variable gets reinitialized each time. That said, like in my code example below I am resetting the variables each time with new values. Apache Perl Configuration is set up like this: PerlModule ModPerl::Registry <Directory /var/www/html/perl/> SetHandler perl-script PerlHandler ModPerl::Registry Options +ExecCGI </Directory> Here is the perl script getting invoked directly: #!/usr/bin/perl -w use strict; use warnings; use Rest; Rest::init(); Here is my package Rest. This file contains various functions for handling the rest requests. #!/usr/bin/perl -w package Rest; use strict; # Other useful packages declared here. our @EXPORT = qw( init ); our $q = CGI->new; sub GET($$) { my ($path, $code) = @_; return unless $q->request_method eq 'GET' or $q->request_method eq 'HEAD'; return unless $q->path_info =~ $path; $code->(); exit; } sub init() { eval { GET qr{^/ZonesByCustomer/(.+)$} => sub { Rest::Zone->ZonesByCustomer($1); } } } # packages must return 1 1; As a side note, I don't completely understand how this eval statement works, or what string is getting parsed by the qr command. This script was largely taken from this example for setting up a rest based web service with perl. I suspect it is getting pulled from that magical $_ variable, but I'm not sure if it is, or what it is getting populated with (clearly the query string or url, but it only seems to be part of it?). Here is my package Rest::Zone, which will contain the meat of the functional actions. I'm leaving out the specifics of how I'm manipulating the data because it is working and leaving this as an abstract stub. #!/usr/bin/perl -w package Rest::Zone; sub ZonesByCustomer($) { my ($className, $ObjectID) = @_; my $q = CGI->new; print $q->header(-status=>200, -type=>'text/xml',expires => 'now', -Cache_control => 'no-cache', -Pragma => 'no-cache'); my $objectXML = "<xml><object>" . $ObjectID . "</object></xml>"; print $objectXML; } # packages must return 1 1; What is going on here? Why do I keep getting stale or cached values?

    Read the article

  • How do you pass user credentials from WebClient to a WCF REST service?

    - by Alex
    I am trying to expose a WCT REST service and only users with valid username and password would be able to access it. The username and password are stored in a SQL database. Here is the service contract: public interface IDataService { [OperationContract] [WebGet(ResponseFormat = WebMessageFormat.Json)] byte[] GetData(double startTime, double endTime); } Here is the WCF configuration: <bindings> <webHttpBinding> <binding name="SecureBinding"> <security mode="Transport"> <transport clientCredentialType="Basic"/> </security> </binding> </webHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="DataServiceBehavior"> <serviceMetadata httpGetEnabled="true"/> <serviceCredentials> <userNameAuthentication userNamePasswordValidationMode="Custom" customUserNamePasswordValidatorType= "CustomValidator, WCFHost" /> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="DataServiceBehavior" name="DataService"> <endpoint address="" binding="webHttpBinding" bindingConfiguration="SecureBinding" contract="IDataService" /> </service> </services> I am accessing the service via the WebClient class within a Silverlight application. However, I have not been able to figure out how to pass the user credentials to the service. I tried various values for client.Credentials but none of them seems to trigger the code in my custom validator. I am getting the following error: The underlying connection was closed: An unexpected error occurred on a send. Here is some sample code I have tried: WebClient client = new WebClient(); client.Credentials = new NetworkCredential("name", "password", "domain"); client.OpenReadCompleted += new OpenReadCompletedEventHandler(GetData); client.OpenReadAsync(new Uri(uriString)); If I set the security mode to None, the whole thing works. I also tried other clientCredentialType values and none of them worked. I also self-hosted the WCF service to eliminate the issues related to IIS trying to authenticate a user before the service gets a chance. Any comment on what the underlying issues may be would be much appreciated. Thanks. Update: Thanks to Mehmet's excellent suggestions. Here is the tracing configuration I had: <system.diagnostics> <sources> <source name="System.ServiceModel" switchValue="Information, ActivityTracing" propagateActivity="true"> <listeners> <add name="xml" /> </listeners> </source> <source name="System.IdentityModel" switchValue="Information, ActivityTracing" propagateActivity="true"> <listeners> <add name="xml" /> </listeners> </source> </sources> <sharedListeners> <add name="xml" type="System.Diagnostics.XmlWriterTraceListener" initializeData="c:\Traces.svclog" /> </sharedListeners> </system.diagnostics> But I did not see any message coming from my Silverlight client. As for https vs http, I used https as follows: string baseAddress = "https://localhost:6600/"; _webServiceHost = new WebServiceHost(typeof(DataServices), new Uri(baseAddress)); _webServiceHost.Open(); However, I did not configure any SSL certificate. Is this the problem?

    Read the article

  • building median for each string in IList<IDictionary<string, double>>

    - by Oliver
    Actually i have a little brain bender and and just can't find the right direction to get it to work: Given is an IList<IDictionary<string, double>> and it is filled as followed: Name|Value ----+----- "x" | 3.8 "y" | 4.2 "z" | 1.5 ----+----- "x" | 7.2 "y" | 2.9 "z" | 1.3 ----+----- ... | ... To fill this up with some random data i used the following methods: var list = CreateRandomPoints(new string[] { "x", "y", "z" }, 20); This will work as followed: private IList<IDictionary<string, double>> CreateRandomPoints(string[] variableNames, int count) { var list = new List<IDictionary<string, double>>(count); list.AddRange(CreateRandomPoints(variableNames).Take(count)); return list; } private IEnumerable<IDictionary<string, double>> CreateRandomPoints(string[] variableNames) { while (true) yield return CreateRandomLine(variableNames); } private IDictionary<string, double> CreateRandomLine(string[] variableNames) { var dict = new Dictionary<string, double>(variableNames.Length); foreach (var variable in variableNames) { dict.Add(variable, _Rand.NextDouble() * 10); } return dict; } Also i can say that it is already ensured that every Dictionary within the list contains the same keys (but from list to list the names and count of the keys can change). So that's what i got. Now to the things i need: I'd like to get the median (or any other math aggregate operation) of each Key within all the dictionaries, so that my function to call would look something like: IDictionary<string, double> GetMedianOfRows(this IList<IDictionary<string, double>> list) The best would be to give some kind of aggregate operation as a parameter to the function to make it more generic (don't know if the func has the correct parameters, but should imagine what i'd like to do): private IDictionary<string, double> Aggregate(this IList<IDictionary<string, double>> list, Func<IEnumerable<double>, double> aggregator) Also my actual biggest problem is to do the job with a single iteration over the list, cause if within the list are 20 variables with 1000 values i don't like to iterate 20 times over the list. Instead i would go one time over the list and compute all twenty variables at once (The biggest advantage of doing it that way would be to use this also as IEnumerable<T> on any part of the list in a later step). So here is the code i already got: public static IDictionary<string, double> GetMedianOfRows(this IList<IDictionary<string, double>> list) { //Check of parameters is left out! //Get first item for initialization of result dictionary var firstItem = list[0]; //Create result dictionary and fill in variable names var dict = new Dictionary<string, double>(firstItem.Count); //Iterate over the whole list foreach (IDictionary<string, double> row in list) { //Iterate over each key/value pair within the list foreach (var kvp in row) { //How to determine median of all values? } } return dict; } Just to be sure here is a little explanation about the Median.

    Read the article

  • rank on two dates - each date iteratively

    - by Abhi
    How to query for rank over 'value' for each day in the below table? Ex: IT should list out the 'mydate', 'value', 'rank' for all values on 20th and then do a fresh rank() for all values on 21st? Thanks... create table tv (mydate,value) as select to_date('20/03/2010 00','dd/mm/yyyy HH24'),98 from dual union all select to_date('20/03/2010 01','dd/mm/yyyy HH24'),124 from dual union all select to_date('20/03/2010 02','dd/mm/yyyy HH24'),140 from dual union all select to_date('20/03/2010 03','dd/mm/yyyy HH24'),138 from dual union all select to_date('20/03/2010 04','dd/mm/yyyy HH24'),416 from dual union all select to_date('20/03/2010 05','dd/mm/yyyy HH24'),196 from dual union all select to_date('20/03/2010 06','dd/mm/yyyy HH24'),246 from dual union all select to_date('20/03/2010 07','dd/mm/yyyy HH24'),176 from dual union all select to_date('20/03/2010 08','dd/mm/yyyy HH24'),124 from dual union all select to_date('20/03/2010 09','dd/mm/yyyy HH24'),128 from dual union all select to_date('20/03/2010 10','dd/mm/yyyy HH24'),32010 from dual union all select to_date('20/03/2010 11','dd/mm/yyyy HH24'),384 from dual union all select to_date('20/03/2010 12','dd/mm/yyyy HH24'),368 from dual union all select to_date('20/03/2010 13','dd/mm/yyyy HH24'),392 from dual union all select to_date('20/03/2010 14','dd/mm/yyyy HH24'),374 from dual union all select to_date('20/03/2010 15','dd/mm/yyyy HH24'),350 from dual union all select to_date('20/03/2010 16','dd/mm/yyyy HH24'),248 from dual union all select to_date('20/03/2010 17','dd/mm/yyyy HH24'),396 from dual union all select to_date('20/03/2010 18','dd/mm/yyyy HH24'),388 from dual union all select to_date('20/03/2010 19','dd/mm/yyyy HH24'),360 from dual union all select to_date('20/03/2010 20','dd/mm/yyyy HH24'),194 from dual union all select to_date('20/03/2010 21','dd/mm/yyyy HH24'),234 from dual union all select to_date('20/03/2010 22','dd/mm/yyyy HH24'),328 from dual union all select to_date('20/03/2010 23','dd/mm/yyyy HH24'),216 from dual union all select to_date('21/03/10 00','dd/mm/yyyy HH24'),224 from dual union all select to_date('21/03/10 01','dd/mm/yyyy HH24'),292 from dual union all select to_date('21/03/10 02','dd/mm/yyyy HH24'),264 from dual union all select to_date('21/03/10 03','dd/mm/yyyy HH24'),132 from dual union all select to_date('21/03/10 04','dd/mm/yyyy HH24'),142 from dual union all select to_date('21/03/10 05','dd/mm/yyyy HH24'),328 from dual union all select to_date('21/03/10 06','dd/mm/yyyy HH24'),184 from dual union all select to_date('21/03/10 07','dd/mm/yyyy HH24'),240 from dual union all select to_date('21/03/10 08','dd/mm/yyyy HH24'),224 from dual union all select to_date('21/03/10 09','dd/mm/yyyy HH24'),496 from dual union all select to_date('21/03/10 10','dd/mm/yyyy HH24'),370 from dual union all select to_date('21/03/10 11','dd/mm/yyyy HH24'),352 from dual union all select to_date('21/03/10 12','dd/mm/yyyy HH24'),438 from dual union all select to_date('21/03/10 13','dd/mm/yyyy HH24'),446 from dual union all select to_date('21/03/10 14','dd/mm/yyyy HH24'),426 from dual union all select to_date('21/03/10 15','dd/mm/yyyy HH24'),546 from dual union all select to_date('21/03/10 16','dd/mm/yyyy HH24'),546 from dual union all select to_date('21/03/10 17','dd/mm/yyyy HH24'),684 from dual union all select to_date('21/03/10 18','dd/mm/yyyy HH24'),568 from dual union all select to_date('21/03/10 19','dd/mm/yyyy HH24'),504 from dual union all select to_date('21/03/10 20','dd/mm/yyyy HH24'),392 from dual union all select to_date('21/03/10 21','dd/mm/yyyy HH24'),256 from dual union all select to_date('21/03/10 22','dd/mm/yyyy HH24'),236 from dual union all select to_date('21/03/10 23','dd/mm/yyyy HH24'),168 from dual

    Read the article

  • What are ProductCode & UpgradeCode & GUID? How to detect if certain application/library is already i

    - by claws
    I've already gone through: http://stackoverflow.com/questions/211192/check-if-the-application-is-already-installed http://stackoverflow.com/questions/488717/detecting-if-a-program-is-already-installed-with-nsis http://nsis.sourceforge.net/Add_uninstall_information_to_Add/Remove_Programs My questions are little more in depth and little more general. So, as you understood my problem is that I want to check if "Certain Applications" are already installed on the user's machine? I'm generating the installer using Advanced Installer. First few questions: What is Upgrade Code? Advanced installer has option, Product Version (identify by Upgrade Code) What is Product Code? Advanced installer Product Version (identify by Product Code) Component is installed : GUID. What is GUID? All the above three has values like this: {49EB7A6A-1CEF-4A1E-9E89-B9A4993963E3} I don't know what these values are but it seems that computer is recognizing software using this kind of strange ID. My required applications are MySQL DBMS MySQL .NET Connector One fact that I discovered is Upgrade Code & Product Code can be extracted from its "msi installer". MySQL Server Installer = mysql-5.1.43-win32.msi Upgrade Code = {49EB7A6A-1CEF-4A1E-9E89-B9A4993963E3} Product Code = {0ECED7D8-FF53-4DC9-958E-C2177F528DE4} GUID (for component Installed) = ???? Uninstall Path = HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{0ECED7D8-FF53-4DC9-958E-C2177F528DE4} Installer = mysql-5.1.46-win32.msi Upgrade Code = {49EB7A6A-1CEF-4A1E-9E89-B9A4993963E3} Product Code = {EA8FDE5A-2B33-4EDD-B7E7-8D179DF731A5} GUID (for component Installed) = ???? Uninstall Path = HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{EA8FDE5A-2B33-4EDD-B7E7-8D179DF731A5} Installer = mysql-essential-5.1.46-win32.msi Upgrade Code = {49EB7A6A-1CEF-4A1E-9E89-B9A4993963E3} Product Code = {AD33AF2C-6485-4106-B012-1D9CDC88A454} GUID (for component Installed) = ???? Uninstall Path = HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{AD33AF2C-6485-4106-B012-1D9CDC88A454} Installer = mysql-essential-5.1.46-win32.msi Upgrade Code = {49EB7A6A-1CEF-4A1E-9E89-B9A4993963E3} Product Code = {9A4DA7EF-A7B9-4282-90AD-10976AA24E69} GUID (for component Installed) = ???? Uninstall Path = HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{9A4DA7EF-A7B9-4282-90AD-10976AA24E69} Observation from above data: UpgradeCode of a software is constant & is irrespective of its version. ProductCode is version specific & it is used by the MSI internally which is actually reasonable because. MSI allows applications of different versions to be installed side by side. I don't know how to find GUID. MySQL ADO .NET Driver Installer = mysql.data.5.2.5.msi Upgrade Code = --- Product Code = {5FD88490-011C-4DF1-B886-F298D955171B} GUID (for component Installed) = ???? Installer = mysql.data.6.2.2.msi Upgrade Code = --- Product Code = {5FD88490-011C-4DF1-B886-F298D955171B} GUID (for component Installed) = ???? UninstallPath =HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{5FD88490-011C-4DF1-B886-F298D955171B} Installer = mysql.data.6.2.3.msi Upgrade Code = --- Product Code = {5FD88490-011C-4DF1-B886-F298D955171B} GUID (for component Installed) = ???? Observations from above data: - surprisingly, it couldn't find UpgradeCode from installer of mysql.data.*.msi. I wonder why? This contradicts with my above observation. - ProductCode for all different versions is same here. This again contradicts my above observations. -I still don't know how to find GUID. Now, What exactly are these ProductCode & UpgradeCode & GUID. Which denotes what? Why are above observations contradicting? I don't care about versions. I don't want to depend on Application Name then how do I check if MySQL driver & MySQL ADO .NET. Does detection become simple if they are .NET assemblies? How to do then? I don't want to ship the assemblies with my deployed files.

    Read the article

  • Advance way of using UIView convertRect method to detect CGRectIntersectsRect multiple times

    - by Chris
    I recently asked a question regarding collision detection within subviews, with a perfect answer. I've come to the last point in implementing the collision on my application but I've come across a new issue. Using convertRect was fine getting the CGRect from the subView. I needed it to be a little more complex as it wasn't exactly rectangles that needed to be detected. on XCode I created an abstract class called TileViewController. Amongst other properties it has a IBOutlet UIView *detectionView; I now have multiple classes that inherit from TileViewController, and each class there are multiple views nested inside the detectionView which I have created using Interface Builder. The idea is an object could be a certain shape or size, I've programatically placed these 'tiled' detection points bottom center of each object. A user can select an item and interactive with it, in this circumstance move it around. Here is my touchesMoved method -(void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event{ UITouch *touch = [[event allTouches] anyObject]; CGPoint location = [touch locationInView:touch.view]; interactiveItem.center = location; // The ViewController the user has chosen to interact with interactiveView.view.center = location; // checks if the user has selected an item to interact with if (interactiveItem) { // First get check there is more then 1 item in the collection NSUInteger assetCount = [itemViewCollection count]; //NSMutableArray that holds the ViewControllers int detectionCount = 0; // To count how many times a CGRectIntersectsRect occured UIView *parentView = self.view; // if there is more then 1 item begin collision detection if (assetCount > 1) { for (TileViewController *viewController in itemViewCollection) { if (viewController.view.tag != interactiveView.view.tag) { if (viewController.detectionView.subviews) { for (UIView *detectView in viewController.detectionView.subviews) { CGRect viewRect; viewRect = [detectView convertRect:[detectView frame] toView:parentView]; // I could have checked to see if the below has subViews but didn't - In my current implementation it does anyway for (UIView *detectInteractView in interactiveView.detectionView.subviews) { CGRect interactRect; interactRect = [detectInteractView convertRect:[detectInteractView frame] toView:parentView]; if (CGRectIntersectsRect(viewRect, interactRect) == 1) { NSLog(@"collision detected"); [detectView setBackgroundColor:[UIColor blueColor]]; [detectInteractView setBackgroundColor:[UIColor blueColor]]; detectionCount++; } else { [detectView setBackgroundColor:[UIColor yellowColor]]; [detectInteractView setBackgroundColor:[UIColor yellowColor]]; } } } } } } // Logic if no items collided if (detectionCount == 0) { NSLog(@"Do something"); } } } } Now the method itself works to an extent but I don't think it's working with the nested values properly as the detection is off. A simplified version of this method works - Using CGRectIntersectsRect on the detectionView itself so I'm wondering if I'm looping through and checking the views correctly? I wasn't sure whether it was comparing in the same view but I suspect it is, I did modify the code slightly at one point, rather then comparing the values in self.view I took the viewController.detectView's UIViews into the interactiveView.detectView but the outcome was the same. It's rigged so the subviews change colour, but they change colour when they are not even touching, and when they do touch the wrong UIviews are changing colour Many thanks in advance

    Read the article

  • Thinking Sphinx not working in test mode

    - by J. Pablo Fernández
    I'm trying to get Thinking Sphinx to work in test mode in Rails. Basically this: ThinkingSphinx::Test.init ThinkingSphinx::Test.start freezes and never comes back. My test and devel configuration is the same for test and devel: dry_setting: &dry_setting adapter: mysql host: localhost encoding: utf8 username: rails password: blahblah development: <<: *dry_setting database: proj_devel socket: /tmp/mysql.sock # sphinx requires it test: <<: *dry_setting database: proj_test socket: /tmp/mysql.sock # sphinx requires it and sphinx.yml development: enable_star: 1 min_infix_len: 2 bin_path: /opt/local/bin test: enable_star: 1 min_infix_len: 2 bin_path: /opt/local/bin production: enable_star: 1 min_infix_len: 2 The generated config files, config/development.sphinx.conf and config/test.sphinx.conf only differ in database names, directories and similar things; nothing functional. Generating the index for devel goes without an issue $ rake ts:in (in /Users/pupeno/proj) default config Generating Configuration to /Users/pupeno/proj/config/development.sphinx.conf Sphinx 0.9.8.1-release (r1533) Copyright (c) 2001-2008, Andrew Aksyonoff using config file '/Users/pupeno/proj/config/development.sphinx.conf'... indexing index 'user_core'... collected 7 docs, 0.0 MB collected 0 attr values sorted 0.0 Mvalues, 100.0% done sorted 0.0 Mhits, 99.8% done total 7 docs, 422 bytes total 0.098 sec, 4320.80 bytes/sec, 71.67 docs/sec indexing index 'user_delta'... collected 0 docs, 0.0 MB collected 0 attr values sorted 0.0 Mvalues, nan% done total 0 docs, 0 bytes total 0.010 sec, 0.00 bytes/sec, 0.00 docs/sec distributed index 'user' can not be directly indexed; skipping. but when I try to do it for test it freezes: $ RAILS_ENV=test rake ts:in (in /Users/pupeno/proj) DEPRECATION WARNING: require "activeresource" is deprecated and will be removed in Rails 3. Use require "active_resource" instead.. (called from /Users/pupeno/.rvm/gems/ruby-1.8.7-p249/gems/activeresource-2.3.5/lib/activeresource.rb:2) default config Generating Configuration to /Users/pupeno/proj/config/test.sphinx.conf Sphinx 0.9.8.1-release (r1533) Copyright (c) 2001-2008, Andrew Aksyonoff using config file '/Users/pupeno/proj/config/test.sphinx.conf'... indexing index 'user_core'... It's been there for more than 10 minutes, the user table has 4 records. The database directory look quite diferently, but I don't know what to make of it: $ ls -l db/sphinx/development/ total 96 -rw-r--r-- 1 pupeno staff 196 Mar 11 18:10 user_core.spa -rw-r--r-- 1 pupeno staff 4982 Mar 11 18:10 user_core.spd -rw-r--r-- 1 pupeno staff 417 Mar 11 18:10 user_core.sph -rw-r--r-- 1 pupeno staff 3067 Mar 11 18:10 user_core.spi -rw-r--r-- 1 pupeno staff 84 Mar 11 18:10 user_core.spm -rw-r--r-- 1 pupeno staff 6832 Mar 11 18:10 user_core.spp -rw-r--r-- 1 pupeno staff 0 Mar 11 18:10 user_delta.spa -rw-r--r-- 1 pupeno staff 1 Mar 11 18:10 user_delta.spd -rw-r--r-- 1 pupeno staff 417 Mar 11 18:10 user_delta.sph -rw-r--r-- 1 pupeno staff 1 Mar 11 18:10 user_delta.spi -rw-r--r-- 1 pupeno staff 0 Mar 11 18:10 user_delta.spm -rw-r--r-- 1 pupeno staff 1 Mar 11 18:10 user_delta.spp $ ls -l db/sphinx/test/ total 0 -rw-r--r-- 1 pupeno staff 0 Mar 11 18:11 user_core.spl -rw-r--r-- 1 pupeno staff 0 Mar 11 18:11 user_core.tmp0 -rw-r--r-- 1 pupeno staff 0 Mar 11 18:11 user_core.tmp1 -rw-r--r-- 1 pupeno staff 0 Mar 11 18:11 user_core.tmp2 -rw-r--r-- 1 pupeno staff 0 Mar 11 18:11 user_core.tmp7 Nothing gets added to a log when this happens. Any ideas where to go from here? I can run the command line manually: /opt/local/bin/indexer --config config/test.sphinx.conf --all which generates the output as the rake ts:in, so no help there.

    Read the article

  • About the MSDN NOTIFYICONDATA's cbSize member

    - by KenC
    Hi, I am reading the NOTIFYICONDATA documentation in MSDN. It says the NOTIFYICONDATA structure has a cbSize member should be set to the size of the structure, but NOTIFYICONDATA structure's size has different size in every Shell32.dll, so you should get the Shell32.dll version before setting cbSize. The following quotes from MSDN: If it is version 5.0 or later, initialize the cbSize member as follows. nid.cbSize = sizeof(NOTIFYICONDATA); Setting cbSize to this value enables all the version 5.0 and 6.0 enhancements. For earlier versions, the size of the pre-6.0 structure is given by the NOTIFYICONDATA_V2_SIZE constant and the pre-5.0 structure is given by the NOTIFYICONDATA_V1_SIZE constant. Initialize the cbSize member as follows. nid.cbSize = NOTIFYICONDATA_V2_SIZE; Using this value for cbSize will allow your application to use NOTIFYICONDATA with earlier Shell32.dll versions, although without the version 6.0 enhancements. I found it a bit of vague, because 'sizeof(NOTIFYICONDATA)' has different value in Win98 (using Shell32.dll version 4.x), Win2K (version 5.0) and WinXP (version 6.0). How could it 'enable all version 5.0 and 6.0 enhancements'? So I looked for the definition of NOTIFYICONDATA_V1_SIZE (source code as below), I see: NOTIFYICONDATA_V1_SIZE is for Win 2K (doesn't include 2K) NOTIFYICONDATA_V2_SIZE is for Win XP NOTIFYICONDATA_V3_SIZE is for Vista (not sure if I am right) It's completely different from what MSDN says? and none for Win2K? So, I am totaly confused right now. How should I set the cbSize member according to Shell32.dll version? Could anybody help me... Thanks in advance. //= = = = = = = = ShellAPI.h = = = = = = = = typedef struct _NOTIFYICONDATAA { DWORD cbSize; HWND hWnd; UINT uID; UINT uFlags; UINT uCallbackMessage; HICON hIcon; #if (NTDDI_VERSION < NTDDI_WIN2K) CHAR szTip[64]; #endif #if (NTDDI_VERSION >= NTDDI_WIN2K) CHAR szTip[128]; DWORD dwState; DWORD dwStateMask; CHAR szInfo[256]; union { UINT uTimeout; UINT uVersion; // used with NIM_SETVERSION, values 0, 3 and 4 } DUMMYUNIONNAME; CHAR szInfoTitle[64]; DWORD dwInfoFlags; #endif #if (NTDDI_VERSION >= NTDDI_WINXP) GUID guidItem; #endif #if (NTDDI_VERSION >= NTDDI_VISTA) HICON hBalloonIcon; #endif } NOTIFYICONDATAA, *PNOTIFYICONDATAA; typedef struct _NOTIFYICONDATAW { DWORD cbSize; HWND hWnd; UINT uID; UINT uFlags; UINT uCallbackMessage; HICON hIcon; #if (NTDDI_VERSION < NTDDI_WIN2K) WCHAR szTip[64]; #endif #if (NTDDI_VERSION >= NTDDI_WIN2K) WCHAR szTip[128]; DWORD dwState; DWORD dwStateMask; WCHAR szInfo[256]; union { UINT uTimeout; UINT uVersion; // used with NIM_SETVERSION, values 0, 3 and 4 } DUMMYUNIONNAME; WCHAR szInfoTitle[64]; DWORD dwInfoFlags; #endif #if (NTDDI_VERSION >= NTDDI_WINXP) GUID guidItem; #endif #if (NTDDI_VERSION >= NTDDI_VISTA) HICON hBalloonIcon; #endif } NOTIFYICONDATAW, *PNOTIFYICONDATAW; #define NOTIFYICONDATAA_V1_SIZE FIELD_OFFSET(NOTIFYICONDATAA, szTip[64]) #define NOTIFYICONDATAW_V1_SIZE FIELD_OFFSET(NOTIFYICONDATAW, szTip[64]) #ifdef UNICODE #define NOTIFYICONDATA_V1_SIZE NOTIFYICONDATAW_V1_SIZE #else #define NOTIFYICONDATA_V1_SIZE NOTIFYICONDATAA_V1_SIZE #endif #define NOTIFYICONDATAA_V2_SIZE FIELD_OFFSET(NOTIFYICONDATAA, guidItem) #define NOTIFYICONDATAW_V2_SIZE FIELD_OFFSET(NOTIFYICONDATAW, guidItem) #ifdef UNICODE #define NOTIFYICONDATA_V2_SIZE NOTIFYICONDATAW_V2_SIZE #else #define NOTIFYICONDATA_V2_SIZE NOTIFYICONDATAA_V2_SIZE #endif #define NOTIFYICONDATAA_V3_SIZE FIELD_OFFSET(NOTIFYICONDATAA, hBalloonIcon) #define NOTIFYICONDATAW_V3_SIZE FIELD_OFFSET(NOTIFYICONDATAW, hBalloonIcon) #ifdef UNICODE #define NOTIFYICONDATA_V3_SIZE NOTIFYICONDATAW_V3_SIZE #else #define NOTIFYICONDATA_V3_SIZE NOTIFYICONDATAA_V3_SIZE #endif (Seems like the code doesn't look good on the web site, but it from ShellAPI.h, all the same)

    Read the article

  • Parallax backgrounds in OpenGL ES on the iPhone

    - by Scott
    I've got basically a 2d game on the iPhone and I'm trying to set up multiple backgrounds that scroll at different speeds (known as parallax backgrounds). So my thought was to just stick the backgrounds BEHIND the foreground using different z-coordinate planes, and just make them bigger than the foreground (in size) to accommodate, so that the whole thing can be scrolled (just at a different speed). And (as far as I know) I basically implemented that. The only problem is that it seems to entirely ignore whatever z-value I give it, or rather it just zeroes all of them. I see the background (I've only tested ONE background so far, to keep it simple...so for now I just have a foreground and I want one background scrolling at a different speed), but it scrolls 1:1 with my foreground, so it obviously doesn't look right, and most of it is cut off (cause it's bigger). And I've tried various z-values for the background and various near/far clipping planes...it's always the same. I'm probably just doing one simple thing wrong, but I can't figure it out. I'm wondering if it has to do with me using only 2 coordinates in glVertexPointer for the foreground? (Of course for the background I AM passing in 3) I'll post some code: This is some initial setup: glMatrixMode(GL_PROJECTION); glLoadIdentity(); glOrthof(-1.0f, 1.0f, -1.5f, 1.5f, -10.0f, 10.0f); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); glEnableClientState(GL_VERTEX_ARRAY); //glEnableClientState(GL_COLOR_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); //transparency glEnable (GL_BLEND); glBlendFunc (GL_ONE, GL_ONE_MINUS_SRC_ALPHA); A little bit about my foreground's float array....it's interleaved. For my foreground it goes vertex x, vertex y, texture x, texture y, repeat. This all works just fine. This is my FOREGROUND rendering: glVertexPointer(2, GL_FLOAT, 4*sizeof(GLfloat), texes); <br> glTexCoordPointer(2, GL_FLOAT, 4*sizeof(GLfloat), (GLvoid*)texes + 2*sizeof(GLfloat)); <br> glDrawArrays(GL_TRIANGLES, 0, indexCount / 4); BACKGROUND rendering: Same drill here except this time it goes vertex x, vertex y, vertex z, texture x, texture y, repeat. Note the z value this time. I did make sure the data in this array was correct while debugging (getting the right z values). And again, it shows up...it's just not going far back in the distance like it should. glVertexPointer(3, GL_FLOAT, 5*sizeof(GLfloat), b1Texes); glTexCoordPointer(2, GL_FLOAT, 5*sizeof(GLfloat), (GLvoid*)b1Texes + 3*sizeof(GLfloat)); glDrawArrays(GL_TRIANGLES, 0, b1IndexCount / 5); And to move my camera, I just do a simple glTranslatef(x, y, 0.0f); I'm not understanding what I'm doing wrong cause this seems like the most basic 3D function imaginable...things further away are smaller and don't move as fast when the camera moves. Not the case for me. Seems like it should be pretty basic and not even really be affected by my projection and all that (though I've even tried doing glFrustum just for fun, no success). Please help, I feel like it's just one dumb thing. I will post more code if necessary.

    Read the article

  • Convert NSData to primitive variable with ieee-754 or twos-complement ?

    - by William GILLARD
    Hi every one. I am new programmer in Obj-C and cocoa. Im a trying to write a framework which will be used to read a binary files (Flexible Image Transport System or FITS binary files, usually used by astronomers). The binary data, that I am interested to extract, can have various formats and I get its properties by reading the header of the FITS file. Up to now, I manage to create a class to store the content of the FITS file and to isolate the header into a NSString object and the binary data into a NSData object. I also manage to write method which allow me to extract the key values from the header that are very valuable to interpret the binary data. I am now trying to convert the NSData object into a primitive array (array of double, int, short ...). But, here, I get stuck and would appreciate any help. According to the documentation I have about the FITS file, I have 5 possibilities to interpret the binary data depending on the value of the BITPIX key: BITPIX value | Data represented 8 | Char or unsigned binary int 16 | 16-bit two's complement binary integer 32 | 32-bit two's complement binary integer 64 | 64-bit two's complement binary integer -32 | IEEE single precision floating-point -64 | IEEE double precision floating-point I already write the peace of code, shown bellow, to try to convert the NSData into a primitive array. // self reefer to my FITS class which contain a NSString object // with the content of the header and a NSData object with the binary data. -(void*) GetArray { switch (BITPIX) { case 8: return [self GetArrayOfUInt]; break; case 16: return [self GetArrayOfInt]; break; case 32: return [self GetArrayOfLongInt]; break; case 64: return [self GetArrayOfLongLong]; break; case -32: return [self GetArrayOfFloat]; break; case -64: return [self GetArrayOfDouble]; break; default: return NULL; } } // then I show you the method to convert the NSData into a primitive array. // I restrict my example to the case of 'double'. Code is similar for other methods // just change double by 'unsigned int' (BITPIX 8), 'short' (BITPIX 16) // 'int' (BITPIX 32) 'long lon' (BITPIX 64), 'float' (BITPIX -32). -(double*) GetArrayOfDouble { int Nelements=[self NPIXEL]; // Metod to extract, from the header // the number of element into the array NSLog(@"TOTAL NUMBER OF ELEMENTS [%i]\n",Nelements); //CREATE THE ARRAY double (*array)[Nelements]; // Get the total number of bits in the binary data int Nbit = abs(BITPIX)*GCOUNT*(PCOUNT + Nelements); // GCOUNT and PCOUNT are defined // into the header NSLog(@"TOTAL NUMBER OF BIT [%i]\n",Nbit); int i=0; //FILL THE ARRAY double Value; for(int bit=0; bit < Nbit; bit+=sizeof(double)) { [Img getBytes:&Value range:NSMakeRange(bit,sizeof(double))]; NSLog(@"[%i]:(%u)%.8G\n",i,bit,Value); (*array)[i]=Value; i++; } return (*array); } However, the value I print in the loop are very different from the expected values (compared using official FITS software). Therefore, I think that the Obj-C double does not use the IEEE-754 convention as well as the Obj-C int are not twos-complement. I am really not familiar with this two convention (IEEE and twos-complement) and would like to know how I can do this conversion with Obj-C. In advance many thanks for any help or information.

    Read the article

  • Object of type 'customObject' cannot be converted to type 'customObject'.

    - by Phani Kumar PV
    i am receiving the follwing error when i am invoking a custom object "Object of type 'customObject' cannot be converted to type 'customObject'." Following is the scenario when i am getting the error i am invoking a method in a dll dynamically. Load an assembly CreateInstance.... calling MethodInfo.Invoke() passing int, string as a parameter for my method is working fine = No exceptions are thrown. But if I try and pass a one of my own custom class objects as a parameter, then I get an ArgumentException exception, and it is not either an ArgumentOutOfRangeException or ArgumentNullException. "Object of type 'customObject' cannot be converted to type 'customObject'." I am doing this in a web application. The class file containing the method is in a different proj . also the custom object is a sepearte class in the same file. there is no such thing called a static aseembly in my code. I am trying to invoke a webmethod dynamically. this webmethod is having the customObject type as an input parameter. So when i invoke the webmethod i am dynamically creating the proxy assembly and all. From the same assembly i am trying to create an instance of the cusotm object assinging the values to its properties and then passing this object as a parameter and invoking the method. everything is dynamic and nothing is created static.. :( add reference is not used. Following is a sample code i tried to create it public static object CallWebService(string webServiceAsmxUrl, string serviceName, string methodName, object[] args) { System.Net.WebClient client = new System.Net.WebClient(); //-Connect To the web service using (System.IO.Stream stream = client.OpenRead(webServiceAsmxUrl + "?wsdl")) { //--Now read the WSDL file describing a service. ServiceDescription description = ServiceDescription.Read(stream); ///// LOAD THE DOM ///////// //--Initialize a service description importer. ServiceDescriptionImporter importer = new ServiceDescriptionImporter(); importer.ProtocolName = "Soap12"; // Use SOAP 1.2. importer.AddServiceDescription(description, null, null); //--Generate a proxy client. importer.Style = ServiceDescriptionImportStyle.Client; //--Generate properties to represent primitive values. importer.CodeGenerationOptions = System.Xml.Serialization.CodeGenerationOptions.GenerateProperties; //--Initialize a Code-DOM tree into which we will import the service. CodeNamespace nmspace = new CodeNamespace(); CodeCompileUnit unit1 = new CodeCompileUnit(); unit1.Namespaces.Add(nmspace); //--Import the service into the Code-DOM tree. This creates proxy code //--that uses the service. ServiceDescriptionImportWarnings warning = importer.Import(nmspace, unit1); if (warning == 0) //--If zero then we are good to go { //--Generate the proxy code CodeDomProvider provider1 = CodeDomProvider.CreateProvider("CSharp"); //--Compile the assembly proxy with the appropriate references string[] assemblyReferences = new string[5] { "System.dll", "System.Web.Services.dll", "System.Web.dll", "System.Xml.dll", "System.Data.dll" }; CompilerParameters parms = new CompilerParameters(assemblyReferences); CompilerResults results = provider1.CompileAssemblyFromDom(parms, unit1); //-Check For Errors if (results.Errors.Count > 0) { StringBuilder sb = new StringBuilder(); foreach (CompilerError oops in results.Errors) { sb.AppendLine("========Compiler error============"); sb.AppendLine(oops.ErrorText); } throw new System.ApplicationException("Compile Error Occured calling webservice. " + sb.ToString()); } //--Finally, Invoke the web service method Type foundType = null; Type[] types = results.CompiledAssembly.GetTypes(); foreach (Type type in types) { if (type.BaseType == typeof(System.Web.Services.Protocols.SoapHttpClientProtocol)) { Console.WriteLine(type.ToString()); foundType = type; } } object wsvcClass = results.CompiledAssembly.CreateInstance(foundType.ToString()); MethodInfo mi = wsvcClass.GetType().GetMethod(methodName); return mi.Invoke(wsvcClass, args); } else { return null; } } } I cant find anything static being done by me. any help is greatly appreciated. Regards, Phani Kumar PV

    Read the article

  • how to relaod jqgrid in asp.net mvc when i change dropdownlist

    - by sandeep
    what is wrong in this code? when i change drop down list,the grid takes old value of ddl only, not taken newely selected values why? <%-- $(function() { $("#StateId").change(function() { $('#TheForm').submit(); }); }); $(function() { $("#CityId").change(function() { $('#TheForm').submit(); }); }); $(function() { $("#HospitalName").change(function() { $('#TheForm').submit(); }); }); --% var gridimgpath = '/scripts/themes/coffee/images'; var gridDataUrl = '/Claim/DynamicGridData/'; jQuery(document).ready(function() { // $("#btnSearch").click(function() { var StateId = document.getElementById('StateId').value; var CityId = document.getElementById('CityId').value; var HName = document.getElementById('HospitalName').value; // alert(CityId); // alert(StateId); // alert(HName); if (StateId 0 && CityId == '' && HName == '') { CityId = 0; HName = 'Default'.toString(); // alert("elseif0" + HName.toString()); } else if (CityId 0 && StateId == '') { // alert("elseif1"); alert("Please Select State..") } else if (CityId 0 && StateId 0 && HName == '') { // alert("elseif2"); alert(CityId); alert(StateId); HName = "Default"; } else { // alert("else"); StateId = 0; CityId = 0; HName = "Default"; } jQuery("#list").jqGrid({ url: gridDataUrl + '?StateId=' + StateId + '&CityId=' + CityId + '&hospname=' + HName, datatype: 'json', mtype: 'GET', colNames: ['Id', 'HospitalName', 'Address', 'City', 'District', 'FaxNumber', 'PhoneNumber'], colModel: [{ name: 'HospitalId', index: 'HospitalId', width: 40, align: 'left' }, { name: 'HospitalName', index: 'HospitalName', width: 40, align: 'left' }, { name: 'Address1', Address: 'Address1', width: 300 }, { name: 'CityName', index: 'CityName', width: 100 }, { name: 'DistName', index: 'DistName', width: 100 }, { name: 'FaxNo', index: 'FaxNo', width: 100 }, { name: 'ContactNo1', index: 'PhoneNumber', width: 100 } ], pager: jQuery('#pager'), rowNum: 10, rowList: [5, 10, 20, 50], // sortname: 'Id,', sortname: '1', sortorder: "asc", viewrecords: true, //multiselect: true, //multikey: "ctrlKey", // imgpath: '/scripts/themes/coffee/images', imgpath: gridimgpath, caption: 'Hospital Search', width: 700, height: 250 }); $(function() { // $("#btnSearch").click(function() { $('#CityId').change(function() { alert("kjasd"); // Set the vars whenever the date range changes and then filter the results StateId = document.getElementById('StateId').value; CityId = document.getElementById('CityId').value; HName = 'default'; setGridUrl(); }); // Set the date range textbox values $('#StateId').val(StateId.toString()); $('#CityId').val(CityId.toString()); // Set the grid json url to get the data to display setGridUrl(); }); function setGridUrl() { alert(StateId); alert(CityId); alert("hi"); var newGridDataUrl = gridDataUrl + '?StateId=' + StateId + '&CityId=' + CityId + '&hospname=' + HName; jQuery('#list').jqGrid('setGridParam', { url: newGridDataUrl }).trigger("reloadGrid"); } // }); }); <%--<%using (Html.BeginForm("HospitalSearch", "Claim", FormMethod.Post, new { id = "TheForm" })) --% Hospital Search   State :   City :   Hospital Name :       <div id="jqGridContainer"> <table id="list" class="scroll" cellpadding="0" cellspacing="0"></table> </div>

    Read the article

  • With Eclipselink/JPA, can I have a Foreign Composite Key that shares a field with a Primary Composit

    - by user107924
    My database has two entities; Company and Person. A Company can have many People, but a Person must have only one Company. The table structure looks as follows. COMPANY ---------- owner PK comp_id PK c_name PERSON ---------------- owner PK, FK1 personid PK comp_id FK1 p_fname p_sname It has occurred to me that I could remove PERSON.OWNER and derive it through the foreign key; however, I can't make this change without affecting legacy code. I have modeled these as JPA-annotated classes; @Entity @Table(name = "PERSON") @IdClass(PersonPK.class) public class Person implements Serializable { @Id private String owner; @Id private String personid; @ManyToOne @JoinColumns( {@JoinColumn(name = "owner", referencedColumnName = "OWNER", insertable = false, updatable = false), @JoinColumn(name = "comp_id", referencedColumnName = "COMP_ID", insertable = true, updatable = true)}) private Company company; private String p_fname; private String p_sname; ...and standard getters/setters... } @Entity @Table(name = "COMPANY") @IdClass(CompanyPK.class) public class Company implements Serializable { @Id private String owner; @Id private String comp_id; private String c_name; @OneToMany(mappedBy = "company", cascade=CascadeType.ALL) private List people; ...and standard getters/setters... } My PersonPK and CompanyPK classes are nothing special, they just serve as a struct holding owner and the ID field, and override hashCode and equals(o). So far so good. I come across a problem, however, when trying to deal with associations. It seems if I have an existing Company, and create a Person, and associate to the Person to the Company and persist the company, the association is not saved when the Person is inserted. For example, my main code looks like this: EntityManager em = emf.createEntityManager(); em.getTransaction().begin(); CompanyPK companyPK = new CompanyPK(); companyPK.owner="USA"; companyPK.comp_id="1102F3"; Company company = em.find(Company.class, companyPK); Person person = new Person(); person.setOwner("USA"); person.setPersonid("5116628123"); //some number that doesn't exist yet person.setP_fname("Hannah"); person.setP_sname("Montana"); person.setCompany(company); em.persist(person); This completes without error; however in the database I find that the Person record was inserted with a null in the COMP_ID field. With EclipseLink debug logging set to FINE, the SQL query is shown as: INSERT INTO PERSON (PERSONID,OWNER,P_SNAME,P_FNAME) VALUES (?,?,?,?) bind = [5116628123,USA,Montana,Hannah,] I would have expected this to be saved, and the query to be equivalent to INSERT INTO PERSON (PERSONID,OWNER,COMP_ID,P_SNAME,P_FNAME) VALUES (?,?,?,?,?) bind = [5116628123,USA,1102F3,Montana,Hannah,] What gives? Is it incorrect to say updatable/insertable=true for one half of a composite key and =false for the other half? If I have updatable/insertable=true for both parts of the foreign key, then Eclipselink fails to startup saying that I can not use the column twice without having one set to readonly by specifying these options.

    Read the article

  • Problem with Java Mail : No provider for smtp

    - by user359198
    Hello all. I am using JavaMail to do a simple application that sends an email when it finds some files in a directory. I managed to get it worked from Eclipse. I Run the application and it sent the email with no errors. But, when I created the jar, and executed it, it fails in the email sending part. It gives this exception. javax.mail.NoSuchProviderException: No provider for smtp at javax.mail.Session.getProvider(Session.java:460) at javax.mail.Session.getTransport(Session.java:655) at javax.mail.Session.getTransport(Session.java:636) at main.java.util.MailManager.sendMail(MailManager.java:69) at main.java.DownloadsMail.composeAndSendMail(DownloadsMail.java:16) at main.java.DownloadsController.checkDownloads(DownloadsController.java:51) at main.java.MainDownloadsController.run(MainDownloadsController.java:26) at java.lang.Thread.run(Unknown Source) I am using the library in this method: public static boolean sendMail(String subject, String text){ noExceptionsThrown = true; try { loadProperties(); } catch (IOException e1) { System.out.println("Problem encountered while loading properties"); e1.printStackTrace(); noExceptionsThrown = false; } Properties mailProps = new Properties(); String host = "mail.smtp.host"; mailProps.setProperty(host, connectionProps.getProperty(host)); String tls = "mail.smtp.starttls.enable"; mailProps.setProperty(tls, connectionProps.getProperty(tls)); String port = "mail.smtp.port"; mailProps.setProperty(port, connectionProps.getProperty(port)); String user = "mail.smtp.user"; mailProps.setProperty(user, connectionProps.getProperty(user)); String auth = "mail.smtp.auth"; mailProps.setProperty(auth, connectionProps.getProperty(auth)); Session session = Session.getDefaultInstance(mailProps); //session.setDebug(true); MimeMessage message = new MimeMessage(session); try { message.setFrom(new InternetAddress(messageProps.getProperty("from"))); message.addRecipient(Message.RecipientType.TO, new InternetAddress( messageProps.getProperty("to"))); message.setSubject(subject); message.setText(text); Transport t = session.getTransport("smtp"); try { t.connect(connectionProps.getProperty("user"), passwordProps .getProperty("password")); t.sendMessage(message, message.getAllRecipients()); } catch (Exception e) { System.out.println("Error encountered while sending the email"); e.printStackTrace(); noExceptionsThrown = false; } finally { t.close(); } } catch (Exception e) { System.out.println("Error encountered while creating the message"); e.printStackTrace(); noExceptionsThrown = false; } return noExceptionsThrown; } I am loading these values from properties files. mail.smtp.host=smtp.gmail.com mail.smtp.starttls.enable=true mail.smtp.port=587 mail.smtp.auth=true I have tried to change the host by ssl://smtp.gmail.com, the port by 465 (just for trying something different), but it doesn't work either. Anyway, if it works fine from Eclipse with the original parameters, I guess that the values are correct, but the problem is creating the jar. I don't know very much about the possible results or changes when creating a jar. Could the JavaMail libraries someway go wrong when the jar is created? Do you have any ideas? Thank you very much for your help.

    Read the article

  • Trouble calculating correct decimal digits.

    - by Crath
    I am trying to create a program that will do some simple calculations, but am having trouble with the program not doing the correct math, or placing the decimal correctly, or something. Some other people I asked cannot figure it out either. Here is the code: http://pastie.org/887352 When you enter the following data: Weekly Wage: 500 Raise: 3 Years Employed: 8 It outputs the following data: Year Annual Salary 1 $26000.00 2 $26780.00 3 $27560.00 4 $28340.00 5 $29120.00 6 $29900.00 7 $30680.00 8 $31460.00 And it should be outputting: Year Annual Salary 1 $26000.00 2 $26780.00 3 $27583.40 4 $28410.90 5 $29263.23 6 $30141.13 7 $31045.36 8 $31976.72 Here is the full description of the task: 8.17 ( Pay Raise Calculator Application) Develop an application that computes the amount of money an employee makes each year over a user- specified number of years. Assume the employee receives a pay raise once every year. The user specifies in the application the initial weekly salary, the amount of the raise (in percent per year) and the number of years for which the amounts earned will be calculated. The application should run as shown in Fig. 8.22. in your text. (fig 8.22 is the output i posted above as what my program should be posting) Opening the template source code file. Open the PayRaise.cpp file in your text editor or IDE. Defining variables and prompting the user for input. To store the raise percentage and years of employment that the user inputs, define int variables rate and years, in main after line 12. Also define double variable wage to store the user’s annual wage. Then, insert statements that prompt the user for the raise percentage, years of employment and starting weekly wage. Store the values typed at the keyboard in the rate, years and wage variables, respectively. To find the annual wage, multiply the new wage by 52 (the number of weeks per year) and store the result in wage. Displaying a table header and formatting output. Use the left and setw stream manipulators to display a table header as shown in Fig. 8.22 in your text. The first column should be six characters wide. Then use the fixed and setprecision stream manipulators to format floating- point values with two positions to the left of the decimal point. Writing a for statement header. Insert a for statement. Before the first semicolon in the for statement header, define and initialize the variable counter to 1. Before the second semicolon, enter a loop- continuation condition that will cause the for statement to loop until counter has reached the number of years entered. After the second semicolon, enter the increment of counter so that the for statement executes once for each number of years. Calculating the pay raise. In the body of the for statement, display the value of counter in the first column and the value of wage in the second column. Then calculate the new weekly wage for the following year, and store the resulting value in the wage variable. To do this, add 1 to the percentage increase (be sure to divide the percentage by 100.0 ) and multiply the result by the current value in wage. Save, compile and run the application. Input a raise percentage and a number of years for the wage increase. View the results to ensure that the correct years are displayed and that the future wage results are correct. Close the Command Prompt window. We can not figure it out! Any help would be greatly appreciated, thanks!

    Read the article

  • ListView: convertView / holder getting confused

    - by Steve H
    I'm working with a ListView, trying to get the convertView / referenceHolder optimisation to work properly but it's giving me trouble. (This is the system where you store the R.id.xxx pointers in as a tag for each View to avoid having to call findViewById). I have a ListView populated with simple rows of an ImageView and some text, but the ImageView can be formatted either for portrait-sized images (tall and narrow) or landscape-sized images (short and wide). It's adjusting this formatting for each row which isn't working as I had hoped. The basic system is that to begin with, it inflates the layout for each row and sets the ImageView's settings based on the data, and includes an int denoting the orientation in the tag containing the R.id.xxx values. Then when it starts reusing convertViews, it checks this saved orientation against the orientation of the new row. The theory then is that if the orientation is the same, then the ImageView should already be set up correctly. If it isn't, then it sets the parameters for the ImageView as appropriate and updates the tag. However, I found that it was somehow getting confused; sometimes the tag would get out of sync with the orientation of the ImageView. For example, the tag would still say portrait, but the actual ImageView would still be in landscape layout. I couldn't find a pattern to how or when this happened; it wasn't consistent by orientation, position in the list or speed of scrolling. I can solve the problem by simply removing the check about convertView's orientation and simply always set the ImageView's parameters, but that seems to defeat the purpose of this optimisation. Can anyone see what I've done wrong in the code below? static LinearLayout.LayoutParams layoutParams; (...) public View getView(int position, View convertView, ViewGroup parent){ ReferenceHolder holder; if (convertView == null){ convertView = inflater.inflate(R.layout.pick_image_row, null); holder = new ReferenceHolder(); holder.getIdsAndSetTag(convertView, position); if (data[position][ORIENTATION] == LANDSCAPE) { // Layout defaults to portrait settings, so ImageView size needs adjusting. // layoutParams is modified here, with specific values for width, height, margins etc holder.image.setLayoutParams(layoutParams); } holder.orientation = data[position][ORIENTATION]; } else { holder = (ReferenceHolder) convertView.getTag(); if (holder.orientation != data[position][ORIENTATION]){ //This is the key if statement for my question switch (image[position][ORIENTATION]) { case PORTRAIT: // layoutParams is reset to the Portrait settings holder.orientation = data[position][ORIENTATION]; break; case LANDSCAPE: // layoutParams is reset to the Landscape settings holder.orientation = data[position][ORIENTATION]; break; } holder.image.setLayoutParams(layoutParams); } } // and the row's image and text is set here, using holder.image.xxx // and holder.text.xxx return convertView; } static class ReferenceHolder { ImageView image; TextView text; int orientation; void getIdsAndSetTag(View v, int position){ image = (ImageView) v.findViewById(R.id.pickImageImage); text = (TextView) v.findViewById(R.id.pickImageText); orientation = data[position][ORIENTATION]; v.setTag(this); } } Thanks!

    Read the article

  • Matlab: Optimization by perturbing variable

    - by S_H
    My main script contains following code: %# Grid and model parameters nModel=50; nModel_want=1; nI_grid1=5; Nth=1; nRow.Scale1=5; nCol.Scale1=5; nRow.Scale2=5^2; nCol.Scale2=5^2; theta = 90; % degrees a_minor = 2; % range along minor direction a_major = 5; % range along major direction sill = var(reshape(Deff_matrix_NthModel,nCell.Scale1,1)); % variance of the coarse data matrix of size nRow.Scale1 X nCol.Scale1 %# Covariance computation % Scale 1 for ihRow = 1:nRow.Scale1 for ihCol = 1:nCol.Scale1 [cov.Scale1(ihRow,ihCol),heff.Scale1(ihRow,ihCol)] = general_CovModel(theta, ihCol, ihRow, a_minor, a_major, sill, 'Exp'); end end % Scale 2 for ihRow = 1:nRow.Scale2 for ihCol = 1:nCol.Scale2 [cov.Scale2(ihRow,ihCol),heff.Scale2(ihRow,ihCol)] = general_CovModel(theta, ihCol/(nCol.Scale2/nCol.Scale1), ihRow/(nRow.Scale2/nRow.Scale1), a_minor, a_major, sill/(nRow.Scale2*nCol.Scale2), 'Exp'); end end %# Scale-up of fine scale values by averaging [covAvg.Scale2,var_covAvg.Scale2,varNorm_covAvg.Scale2] = general_AverageProperty(nRow.Scale2/nRow.Scale1,nCol.Scale2/nCol.Scale1,1,nRow.Scale1,nCol.Scale1,1,cov.Scale2,1); I am using two functions, general_CovModel() and general_AverageProperty(), in my main script which are given as following: function [cov,h_eff] = general_CovModel(theta, hx, hy, a_minor, a_major, sill, mod_type) % mod_type should be in strings angle_rad = theta*(pi/180); % theta in degrees, angle_rad in radians R_theta = [sin(angle_rad) cos(angle_rad); -cos(angle_rad) sin(angle_rad)]; h = [hx; hy]; lambda = a_minor/a_major; D_lambda = [lambda 0; 0 1]; h_2prime = D_lambda*R_theta*h; h_eff = sqrt((h_2prime(1)^2)+(h_2prime(2)^2)); if strcmp(mod_type,'Sph')==1 || strcmp(mod_type,'sph') ==1 if h_eff<=a cov = sill - sill.*(1.5*(h_eff/a_minor)-0.5*((h_eff/a_minor)^3)); else cov = sill; end elseif strcmp(mod_type,'Exp')==1 || strcmp(mod_type,'exp') ==1 cov = sill-(sill.*(1-exp(-(3*h_eff)/a_minor))); elseif strcmp(mod_type,'Gauss')==1 || strcmp(mod_type,'gauss') ==1 cov = sill-(sill.*(1-exp(-((3*h_eff)^2/(a_minor^2))))); end and function [PropertyAvg,variance_PropertyAvg,NormVariance_PropertyAvg]=... general_AverageProperty(blocksize_row,blocksize_col,blocksize_t,... nUpscaledRow,nUpscaledCol,nUpscaledT,PropertyArray,omega) % This function computes average of a property and variance of that averaged % property using power averaging PropertyAvg=zeros(nUpscaledRow,nUpscaledCol,nUpscaledT); %# Average of property for k=1:nUpscaledT, for j=1:nUpscaledCol, for i=1:nUpscaledRow, sum=0; for a=1:blocksize_row, for b=1:blocksize_col, for c=1:blocksize_t, sum=sum+(PropertyArray((i-1)*blocksize_row+a,(j-1)*blocksize_col+b,(k-1)*blocksize_t+c).^omega); % add all the property values in 'blocksize_x','blocksize_y','blocksize_t' to one variable end end end PropertyAvg(i,j,k)=(sum/(blocksize_row*blocksize_col*blocksize_t)).^(1/omega); % take average of the summed property end end end %# Variance of averageed property variance_PropertyAvg=var(reshape(PropertyAvg,... nUpscaledRow*nUpscaledCol*nUpscaledT,1),1,1); %# Normalized variance of averageed property NormVariance_PropertyAvg=variance_PropertyAvg./(var(reshape(... PropertyArray,numel(PropertyArray),1),1,1)); Question: Using Matlab, I would like to optimize covAvg.Scale2 such that it matches closely with cov.Scale1 by perturbing/varying any (or all) of the following variables 1) a_minor 2) a_major 3) theta Thanks.

    Read the article

  • JQuery SelectToUISlider Issues

    - by David Savage
    Hopefully this hasn't been asked before as just a slider question, but I couldn't find an answer when already browsing questions. So, here goes: I have a SelectToUISlider (http://www.filamentgroup.com/lab/update_jquery_ui_slider_from_a_select_element_now_with_aria_support/) which is basically a modified JQuery UI Slider, and I'm using a range value. So, I start with one handle at 60, and another at 100 (scale from 0 to 100). What I want to do is click a radio button so that the 100 changes to a 0, and be able to change back to 100. I have been unsuccessful at changing it via JQuery selectors/javascript. However, when changing the selects to move the handles, this works, but the range appears not to follow if the second handle (at 100) moves to 0 behind the first handle (at 60). I'm thinking I might have to destroy the slider and rebuild it with the second handle (that starts as 100) become the first handle at 0 in this scenario (although I've tried destroying it and it doesn't seem to respond to that either.) Here's what I've tried so far that doesn't work: <script type="text/javascript"> {literal} $(function(){ $('select').selectToUISlider({ labels: 10 }); }); function event_occurs(does) { if (does == 1) { $('.ui-slider').slider('option', 'values', [60,100]); } else { $('.ui-slider').slider('option', 'values', [0,60]); } } </script> <style type="text/css"> form {font-size: 62.5%; font-family:"Segoe UI","Helvetica Neue",Helvetica,Arial,sans-serif; } fieldset { border:0; margin: 1em; height: 12em;} label {font-weight: normal; float: left; margin-right: .5em; font-size: 1.1em;} select {margin-right: 1em; float: left;} .ui-slider {clear: both; top: 5em;} .ui-slider-tooltip {white-space: nowrap;} </style> {/literal} <form action="#"> <fieldset> <select name="valueA" id="my_estimate"> {section name="estimates" loop=101} <option value="{$smarty.section.estimates.index}"{if $smarty.section.estimates.index == 60} selected{/if}>{$smarty.section.estimates.index}</option> {/section} </select> <select name="valueB" id="payout"> {section name="estimates" loop=101} <option value="{$smarty.section.estimates.index}"{if $smarty.section.estimates.index == 100} selected{/if}>{$smarty.section.estimates.index}</option> {/section} </select> </fieldset> </form> <input type="radio" onclick="event_occurs(1)" name="Event" checked="checked"> Event Occurs<br /> <input type="radio" onclick="event_occurs(0)" name="Event"> Event Does Not Occur As it is now, nothing happens when clicking the radio buttons, but I'm also not getting any Javascript errors. After I get this working, I would also like to find some way to disable one of the handles through changing the slider property. Ie leave the handle where its at but not allow it to be dragged. Any help is greatly appreciated.

    Read the article

  • Search like google

    - by Rajanikant
    I have a task to make a search module in which i have database users and tablename userProfile and i want to search profile when i entered text in text box for ex. if i entered "I am looking for MBA in delhi" or 'mba information in delhi' it will displayed all user registered expertise as mba and city in delhi . this will be like job portal or any social networking portal my database is -- phpMyAdmin SQL Dump -- version 2.8.1 -- http://www.phpmyadmin.net -- Host: localhost -- Generation Time: May 01, 2010 at 10:58 AM -- Server version: 5.0.21 -- PHP Version: 5.1.4 -- Database: users -- -- Table structure for table userProfile CREATE TABLE userprofile ( id int(11) NOT NULL auto_increment, name varchar(50) collate latin1_general_ci NOT NULL, expertise varchar(50) collate latin1_general_ci NOT NULL, city varchar(50) collate latin1_general_ci NOT NULL, state varchar(50) collate latin1_general_ci NOT NULL, discription varchar(500) collate latin1_general_ci NOT NULL, PRIMARY KEY (id) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 COLLATE=latin1_general_ci AUTO_INCREMENT=3 ; -- -- Dumping data for table userProfile INSERT INTO userProfile VALUES (1, 'a', 'MBA HR', 'Delhi', 'Delhi', 'Fortune is top management college in Delhi, Best B-schools in India providing business studies and management training. FIIB is Delhi based most ranked ...'); INSERT INTO userProfile VALUES (2, 'b', 'MBA marketing', 'Delhi', 'Delhi', 'Fortune is top management college in Delhi, Best B-schools in India providing business studies and management training. FIIB is Delhi based most ranked ...'); and search.php page <?php include("config.php"); include("class.search.php"); $br=new search(); if($_POST['searchbutton']) { $str=$_POST['textfield']; $brstr=$br->breakkey($str); } ?> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Untitled Document</title> </head> <body> <table width="100%" border="0"> <form name="frmsearch" method="post"> <tr> <td width="367">&nbsp;</td> <td width="300"><label> <input name="textfield" type="text" id="textfield" size="50" /> </label></td> <td width="294"><label> <input type="submit" name="searchbutton" id="button" value="Search" /> </label></td> </tr></form> <tr> <td>&nbsp;</td> <td>&nbsp;</td> <td>&nbsp;</td> </tr> <tr> <td>&nbsp;</td> <td>&nbsp;</td> <td>&nbsp;</td> </tr> </table> </body> </html> and config.php is <?php error_reporting(E_ALL); $host="localhost"; $username="root"; $password=""; $dbname="users"; $con=mysql_connect($host,$username,$password) or die("could not connect database"); $db=mysql_select_db($dbname,$con) or die("could not select database"); ?> and class.search.php is <?php class search { function breakkey($key) { global $db; $words=explode(' ',$key); return $words; } function searchitem($perm) { global $db; foreach($perm as $k=>$v) { $sql="select * from users" } } } ?>

    Read the article

< Previous Page | 401 402 403 404 405 406 407 408 409 410 411 412  | Next Page >