Search Results

Search found 16560 results on 663 pages for 'far'.

Page 405/663 | < Previous Page | 401 402 403 404 405 406 407 408 409 410 411 412  | Next Page >

  • RouterOS on Hyper-V (v3/2012) - any way to get it working?

    - by TomTom
    Trying to set up a small VPN point to connect into a remote Hyper-V cluster using ROuterOS. Anyone got it working ON Hyper-V with the latest builds of RouterOS? It seems the legacy network adapter is not supported anymore either (or just broken). The platform is a Windows Server 2012 RC. This is not a high performance setup - the RouterOS wont do the routing for more than the backend administrative access, and the only real traffic we will see there is when ISO images for new operating systems are uploaded. Otherwise we will have possibly RDP traffic as well as web / http traffioc, but this is internal only (dashboards, some control panel). The server has no public business. So the price for non virtualized network cards is ok for me. After hooking up - ping just does not work. After some time I see in windows (arp -a on the command line), so I know that the Hyper-V side is set up properly. Just no packets arrived. I have turned off all protection on Hyper-V (or : not turned them on), so no MAC spoofing protection etc. in the Advanced page for the legacy adapters. Unless I can get it work I will have to resort to using a windows install as router / VPN endpoint, which introduces another OS into the fabric (we run all routers etc. so far on mikrotik in hardware, which is why I want this one to be RouterOS, too). And no, putting hardware there is NOT an option - the cost would be significant.

    Read the article

  • Squid on an Azure VM

    - by LantisGaius
    I can't get it to work. Here's exactly what I did: Create a new Azure VM, Windows Server 2012. RDP to the new VM Download & Extract Squid for Windows (2.7.STABLE8) Rename the conf files (squid, mime & cachemgr) Add the following lines on the end of squid.conf auth_param basic program c:/squid/libexec/ncsa_auth.exe c:/squid/etc/passwd.txt auth_param basic children 5 auth_param basic realm Welcome to http://abcde.fg Squid Proxy! auth_param basic credentialsttl 12 hours auth_param basic casesensitive off acl ncsa_users proxy_auth REQUIRED http_access allow ncsa_users Use http://www.htaccesstools.com/htpasswd-generator-windows/ to create passwd.txt Test passwd.txt via c:/squid/libexec/ncsa_auth.exe c:/squid/etc/passwd.txt (success) squid -z squid -i net start squid (No errors so far). go to https://manage.windowsazure.com, Virtual Machines - myVM - Endpoints Add Endpoint: Name: Squid Protocol: TCP Public Port: 80 Private Port: 3128 That's it. Unfortunately, it doesn't work. I think I screwed something up at the endpoint? I'm not sure.. help? EDIT: I'm testing it via Firefox - Options - Advanced - Network, and the exact error is "The Proxy Server is refusing connections." I'm using my DNS as the Proxy server "abcdef.cloudapp.net" and port 80 (since that's my public endpoint).

    Read the article

  • Unable to back up SQL Server databases using a maintenance plan

    - by Stephen Jennings
    I am trying to create a maintenance plan that will run automatically and back up my SQL Server 2005 databases automatically. I create a new maintenance plan and add a "Back Up Database Task", select all databases, and choose a path to back up to. When I save and try to execute this plan, I get the following error message: =================================== Execution failed. See the maintenance plan and SQL Server Agent job history logs for details. =================================== Job 'Backup.Subplan_1' failed. (SqlManagerUI) ------------------------------ Program Location: at Microsoft.SqlServer.Management.SqlManagerUI.MaintenancePlanMenu_Run.PerformActions() I've checked the maintenance plan log, the agent log, and just about every log file I can find and there are no entries at all to help me figure out why this is failing. If I right-click on a specific database and select "Back Up", the task succeeds. I tried changing the plan to back up just that one database and it still failed. I've tried running the plan with both Windows authentication and SQL Server authentication with the sa account. I also tried specifically granting the SQL Server Agent user account full privileges on the backup folder, but it still failed. While searching the web for clues, the only solution I've run across so far suggests running sp_configure 'allow_update', 0. I tried this but allow_update was already set to 0 and it did not fix the problem. The Windows server and SQL Server have all updates applied to them. Thanks for any suggestions!

    Read the article

  • AWS Cloud Formation.Requires capabilities : [CAPABILITY_IAM] (Child Stack)

    - by Drew Khoury
    I'm running a CloudFormation template in the AWS Console. Running Stack Directly I started with a template that used IAM resources, and the console prompts me to acknowledge IAM capabilities when running the stack directly. Running Stack as a child I then tried to call the same stack from a parent stack and did not receive the same prompt. The stack then failed with the message: Requires capabilities : [CAPABILITY_IAM] Research The docs indicate that I can run CF scripts in a number of ways. There's plenty of docs around CLI/API and supplying the capability parameter, but there appears to be no information about how to make sure it's applied when running through the console. http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-iam-template.html IAM Resources in AWS CloudFormation Templates CF Console CLI API What I've done / What I think I've raised an issue via the forum for now, but no response (yet): https://forums.aws.amazon.com/thread.jspa?threadID=139160 I suspect this is a bug in the Console, as there doesn't appear to be any documentation of how to change the behaviour via the console and as far as I'm aware this should just work. Anyone came across the same problem, or can report that it's working fine for them?

    Read the article

  • Port forwarding on Fortigate 50B

    - by sindre j
    I have serious problems setting up port forwarding on a Fortigate 50B. The unit is basically running as factory default, the wan1 interface is connected to my fibre optic internet modem, and my lan is connected to the internal switch of the Fortigate. The factory default firewall policy allowing traffic from the internal interface to wan1 is kept and I'm able to access the interet as normal. Then I added a virtual ip and a firewall policy for allowing access from the internet to my local servers (ip 192.168.9.51) webserver (standard port 80). The settings I made are as follows. Edit Virtual IP Mapping Name : Server VIP External interface : wan1 Type : Static NAT Extermal IP Address/Range : 0.0.0.0 Mapped IP Address/Range : 192.168.9.51 Port Forwading : not checked Firewall policy Source interface/Zone : wan1 Source address : all Destination interface/Zone : internal Destination address : Server VIP Schedule : always Service : HTTP Action : ACCEPT no other settings checked What happens now is that I'm unable to access internet from my server, I'm not getting through to the webserver from internet either. I'm able to ping a site on the outside, but all web traffic is blocked, both ways. I've checked the documentation, but as far as I can tell I have set this up correctly. Anyone here with knowledge of Fortigate port forwading/NAT?

    Read the article

  • Plesk Postfix SMTP 550 5.7.1 "Command rejected" for one external sender

    - by Mnebuerquo
    My server is rejecting emails from one external sender. I suspect this might be misconfiguration on the sending server, but I'm not sure from these error messages. The non-delivery report message the sender gets contains this text: #5.7.1 smtp;550 5.7.1 Command rejected> #SMTP# I also see this message in /var/messages at about the same time as the rejection message was sent, though I'm not sure if it's actually related: Nov 29 12:29:28 localhost postfix/smtpd[31829]: sql_sqlite3 plugin: no result found I'm using Plesk 10.4.4 Update #47, Centos 6.2, Postfix 2.8.4-11100615 on my mail server. This is only happening for one sender so far, but I found a Google result on experts-exchange.com which seemed to identify the same problem and with the same sending domain. This was posted back in June, and currently has no answers, so even if I was a paying customer it wouldn't be answered. (http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Q_27760746.html) The generating server is bigfish.com. What I need to determine is if this is a problem on my server or a problem with bigfish.com. Is there more information I can find in config files, logs, etc. to figure this out?

    Read the article

  • How to install Konica Minolta PagePro 1300W to Windows 7 64-bit?

    - by jsalonen
    I recently switched to Windows 7 (Home Pro, 64-bit) to discover that my Konica Minolta PagePro 1300W printer no longer works. When connected, Win7 prompts that it can not install a driver for the device. I have done a lot of googling to solve this problem, with no luck so far. From Konica Minolta official website, I can find drivers only for Windows XP/2000. My current reasoning is that they currently don't and most likely are not going to support Win7 let alone 64-bit version of it for this rather old printer. So my question is: does anyone have any good tips on how to make this printer work on my system? Is there any other place I could look for drivers, or in generally, do you know any workarounds that could let me printer work? One of the workaround I have been considering is to install a Windows XP / Ubuntu Linux on a virtualbox and use that system when I really really need to printer. This is of course not the optimal solution, but would let me possibly to use the printer until I buy a newer model.

    Read the article

  • multiple monitor, ATI EyeFinity vs NVidia Mosaic on HDMI

    - by user1531897
    i have been googling much for answer but only someone with real experience can help here. my aim is to have 5 monitors connected to one computer in 2x2 full screen on all 4 monitors (video wall) with same resolution, 4xfullHD for example, plus one -5th monitor as controling. Ati have example picture of this configuration here. I have no gaming nor 3d needs here. Simple desktop applications plus video streams. So because graphic cards for this are expensive, i need to find out before buying pros and cons of 2 possible solutions (1) Ati Eyefinity capable card(s) ...and (2) Nvidia Quadro/NVS card(s) with mosaic and/or nvidia surround technology. For example i can find that current good cards for this can be: Ati's 7870 eyefinity6 card, link here pros: one card can handle all 5 displays, cons: active DP adapters needed (sometimes with aditional usb-powering complication) Nvidia Qudro NVS 450, link here Both cards have DisplayPorts as outputs (my targets are HDMI displays), but as far i saw information is that Eyefinity needs "active DP-DVI/hdmi adapters" for outputs and they are little expensive...? Does nvidia have this limitation (active adapters) ??? And final question, is Ati Eyefinity still better for this purpose than Nvidia-mosaic by someone's real experience there.

    Read the article

  • Hotmail Senders receiving NDR : "550-Please turn on SMTP Authentication in your mail client..."

    - by DKNUCKLES
    Recently, senders from Hotmail have begun to get the following NDR when trying to e-mail our domain. EDIT : Full NDR Message Action: failed Status: 5.5.0 Diagnostic-Code: smtp;550-Please turn on SMTP Authentication in your mail client, or login to the 550-IMAP/POP3 server before sending your message. 550-snt0-omc3-s36.snt0.hotmail.com [65.55.90.175]:49271 is not permitted to 550 relay through this server without authentication This is seemingly out of the blue and I'm at a loss as to why this is happening. Pertinent Information We have multiple domains hooked up to our Exchange server. We changed our company name in January of this year, and the old primary domain (olddomain.com) will accept e-mails from Hotmail accounts, however e-mails sent to the new primary domain (newdomain.com) bounce back with the NDR listed above. The bounces only appear to be happening when the Hotmail sender is sending a new e-mail, and not if they are responding to an e-mail sent from our end. We have made no changes to the configuration of our server recently. This e-mail first appeared last Friday. As far as I can tell, the mail doesn't even seem to get to our server We performed an Exchange 2003 to 2010 migration last year. The 2003 acts as a Smart Host Any advice on this issue would be greatly appreciated! I'm at a loss

    Read the article

  • procdump on w3wp.exe: Only part of a ReadProcessMemory or WriteProcessMemory request was completed

    - by JakeS
    I'm having a problem with an IIS application that occasionally spikes up in CPU usage, and am trying to use procdump to get a memory dump for examination. I'm running "procdump.exe -64 -mA 9999" where 9999 is the pid of the process. But every time I do it, I get an error: Only part of a ReadProcessMemory or WriteProcessMemory request was completed. Doing this also recycles the apppool, relieving the CPU spike, so I can't keep trying until I get it right. Does anyone know what is going wrong? EDIT WITH MORE INFO: So far I've failed to generate a debug dump no matter what tool I try. All of them seem to generate the same sort of error. This is 2008 R2 Datacenter running IIS7 with a 64-bit asp.net web site. My best guess is that something is getting blocked, causing some requests to remain open in IIS and gradually using up resources. If I monitor the worker process using the IIS Manager and view all requests, throughout the day I'll start to see some requests that "stick" and run forever. Some of these are for static files. Some are for aspx pages. I cannot see any "common" reason for them. Every once in a while the app pool starts taking up 100% CPU and the only remedy is to kill it.

    Read the article

  • HYPER-V R2 Can not mount ISO from network location (UNC Path)

    - by Entity_Razer
    So, as the name suggest I'm trying to mount a ISO from a network share using the UNC path to a HYPER-V R2 Cluster. This is a pure Demo / test case setup with: 2x HYPER-V R2 1X NAS/iSCSI CSV Cluster Management is happening through the MMC with RSAT tools. So what i've done so far is: Set up the cluster and configure Quorum, add CSV Shares and disks, set up 1 Virtual Machine on the Hyper-1 node. What i'm trying to do is, you go to settings --- DVD Drive --- use network location ---- Pick ISO file and press "apply". Error I'm getting is either "User account does not have rights to mount iso". I changed that or stopped getting that message when I went to the HYPER-V Node settings and tabbed on: "Use Default Credentials Automatically". Now I stopped getting the "user does not have right..." message but I get the following: Error applying DVD Drive Changes Failed to remove device microsoft synthetic DVD Drive:" the specified network resource or device is no longer available" I've google'd the problem but am unable to find a solution. Anyone here able to help me out ? Much abbliged !

    Read the article

  • Exchange 2010 DAG Automatic Failover Testing/Issue. Not always automatically failing over to health

    - by Richard
    Ok I've got 2 exchange 2010 servers that run client access/hub transport/mailbox roles and one exchange 2010 server running just client access/hub transport roles and acts as my bridgehead. The two mailbox servers are running one database setup in a DAG. Server A shows the DB Mounted and Server B shows Healthy. If I reboot Server A via windows GUI Server B switches from healthy to mounted and I see hardly any interruption in service using Outlook 2007. Server A shows "Service down", then "Failed" then "Healthy" and leaves the DB mounted on Server B. This is how it should work, so far so good. Now if I test Server A being shut down cold, or unplugging both nics from network to simulate failure, Server B switches from Healthy to Mounted and server A switches to "Service Down" but my outlook client never connects to the DB mounted on server B! I can connect to server C (client access/hub transport) and get to my email and even send new email out, but incoming email doesn't deliver until Server A is brought back online and it's DB goes back to Healthy status. So I don't understand why it auto fail-overs when I reboot the server with the mounted DB copy, causing very little outlook 2007 hiccup if any. But when I shutdown or DC the mounted DB server it DOES mount the healthy copy but outlook 2007 clients can't connect.. I hope the picture I'm trying to paint makes some sense, it's driving me a little batty. Any help would be appreciated!

    Read the article

  • Occasional disk I/O errors in SQLite

    - by Alix Axel
    I have a very simple website running PHP and SQLite 3.7.9 (with PDO). After establishing the SQLite connection I immediately execute the following queries: PRAGMA busy_timeout=0; PRAGMA cache_size=8192; PRAGMA foreign_keys=ON; PRAGMA journal_size_limit=67110000; PRAGMA legacy_file_format=OFF; PRAGMA page_size=4096; PRAGMA recursive_triggers=ON; PRAGMA secure_delete=ON; PRAGMA synchronous=NORMAL; PRAGMA temp_store=MEMORY; PRAGMA journal_mode=WAL; PRAGMA wal_autocheckpoint=4096; This website only has one writer and a few occasional readers, so I don't expect any concurrency problems (and I'm even using WAL). Every couple of days, I've seen this error being reported by PHP: Fatal error: Uncaught exception 'PDOException' with message 'SQLSTATE[HY000]: General error: 10 disk I/O error' in ... Stack trace: #0 ...: PDO-exec('PRAGMA cache_si...') There are several things that make this error very weird to me: it's not a transient problem - no matter how many times I refresh the page, it won't go away the database file is not corrupted - the sqlite3 executable can open the database without problems If the following pragmas are commented out, PHP stops throwing the disk I/O exception: PRAGMA cache_size=8192; PRAGMA synchronous=NORMAL; PRAGMA journal_mode=WAL; Then, after successfully reconnecting to the database, I'm able to reintroduce these pragmas and the code with run smoothly for days - until eventually, the same error will occur without any apparent reason. I wasn't able to reproduce this error so far, so I'm clueless about the origin of it. I'm really curious what may be causing this problem... Any ideas? Environment: Ubuntu Server 12.04 LTS PHP 5.4.15 SQLite 3.7.9 Database size: ? 10MiB Transaction (write) size: ? 1KiB EDIT: Might these symptoms have something to do with busy_timeout?

    Read the article

  • Windows 7 intermittently drops wired internet/lan connection.

    - by CraigTP
    In a nutshell, my Windows 7 Ultimate PC intermittently drops it's internet connection. Why? Background: My PC is wired to my ADSL modem/router which is directly connected to the phone line. I also have wireless connectivity turned on within the router for a laptop to connect wirelessly. Every few hours or so, when using my PC, I find I cannot access the internet and pages will not load. Eventually, Windows7 will update the network icon in the task-tray to show the exclamation mark symbol on the network icon. Opening up the Network And Sharing Centre will show the red cross between the "Multiple Networks" and "The Internet". Here's a picture of the "Network And Sharing Centre" (grabbed when everything was working!) As you can see, I'm running Sun's VirtualBox on this machine and that creates a Network connection for itself. This doesn't seem to affect the intermittent dropping (i.e. the intermittent drops occur whether the VirtualBox connection is in use or not). When the connection does drop, I cannot access any internet pages, nor can I access the router's web admin page at http://192.168.1.1/, so I'm assuming I've lost all local LAN access too. It's definitely not the router (or the internet connection itself) as my laptop, using the wireless connection (and running Vista Home Premium) continues to be able to access the internet (and the router's web admin pages) just fine. Every time this happens, I can immediately restore all internet and LAN access by opening Network Adapter page, disabling the "Local Area Connection" and then re-enabling it. Give it a few seconds and everything is fine again. I assume this is because, beneath the GUI, it's effectively doing an "ipconfig /release" then "ipconfig /renew". Why does this happen in the first place, though? I've googled for this and seen quite a few other people (even on MSDN/Technet forums) experiencing the same or almost the same problem, but with no clear resolution. Suggestions of turning off IPv6 on the LAN adapter, and ensuring there's no power management "sleeping" the network adapter have been tried but do not cure the problem. There does not seem to be any particular sequence of events that cause it to happen either. I've had it go twice in 20 minutes when just randomly browsing the web with no other traffic, and I've also had it go once then not go again for 2-3 hours with the same sort of usage. Can anyone tell me why this is happening and how to make it stop? EDIT: Additional information based upon the answer provided so far: Firstly, I forgot the mention that this is Windows 7 64 bit if that makes any difference at all. I mentioned that I don't think the VirtualBox network adpater is causing this problem in any way, and I also have VirtualBox installed on two other machines, one running Vista Home Premium and the other running XP. Neither of these machine experience the same network connectivity issues as the Windows 7 machine. The IP assignment for the Windows 7 machine is the same both before and after the "drop". I have a DHCP server on the router issuing IP Addresses, however my Windows 7 machine uses a static address. Here's the output from "ipconfig": Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Within the system's event logs, the only event that relates to the connection dropping is a "DNS Client Event" and this is generated after the connection has dropped and is an event detailing that DNS information can't be found for whatever website I may be trying to access, just as the connection drops: Log Name: System Source: Microsoft-Windows-DNS-Client Event ID: 1014 Task Category: None Level: Warning Keywords: User: NETWORK SERVICE Description: Name resolution for the name weather.service.msn.com timed out after none of the configured DNS servers responded. The network adapter chipset is Realtek PCIe GBE Family Controller and I have confirmed that this is the correct chipset for the motherboard (Asus M4A77TD PRO), and in fact, Windows Update installed an updated driver for this on 12/Jan/2009. The details of the update say that it's a Realtek software update from December 2009. Incidentally, I was still having the same intermittent problems prior to this update. It seems to have made no difference at all. EDIT 2 (1 Feb 2010): In my quest to solve this problem, I have discovered some more interesting information. On another forum, someone suggested that I should try running Windows in "Safe Mode With Networking" and see if the problem continues to occur. This was a fantastic suggestion and I don't know why I didn't think of it sooner myself. So, I proceeded to run in Safe Mode with Networking for a number of hours, and amazingly, the "drops" didn't occur once. It was a positive discovery, however, due to the intermittent nature of the original problem, I wasn't completely convinced that the problem was cured. One thing I did note is that the fan on my GFX card was running alot louder than normal. This is due to the fact that I have an ASUS ENGTS250 graphics card (http://www.asus.com/product.aspx?P_ID=B6imcoax3MRY42f3) which had a known problem with a noisy fan until a BIOS update fixed the issue. (See the "Manufacturer Response" here: http://www.newegg.com/Product/Product.aspx?Item=N82E16814121334 for details). Well, running in safe mode had the fan running (incorrectly) at full speed (as it did before the BIOS update), but with an (apparently) stable network connection. Obviously some driver was not loaded for the GFX card when in Safe Mode so this got me thinking about the GFX card (since the very noisy fan was quite obvious when running in Safe Mode). I rebooted into normal mode, and found that Nvidia had a very up-to-date new driver for my GFX card (only about 1 week old), so I downloaded the appropriate driver and installed it. After installation and a reboot, I was able to use my PC for an entire day with NO NETWORK DROPS!!! This was on Saturday. However, on the Sunday, I also had my PC for pretty much the entire day and experienced 2 network drops. No other changes have been made to my PC in this time. So, the story seems to be that updating my graphics card drivers seems to have improved (if not completely fixed) the issue, however, I'm still searching for a proper fix for this problem. Hopefully, this information may help anyone who may have additional ideas as to why this problem is occuring in the first place. (And why does new GFX card drivers have anything to do with the network?) I appreciate everyone's feedback so far. However, I'll have to ask once more if anyone has any further ideas of how to fix this particular problem? Thanks in advance.

    Read the article

  • Lotus NotesSQL Driver - cannot install

    - by PowerUser
    Hi all, I need to install Lotus NotesSQL Driver (current version is 8.5) onto a virtual machine running XP. Here's what's I've done so far: I retrieved the file (CZOWFEN.zip) from the IBM website. I ran the exe. I then went to My Computer-Properties-Advanced-Environmental Settings-System Variables-Path and added "; c:\notessql" so the ODBC administrator could find Notes.ini (why the setup file didn't do this in the first place, i don't know). I opened up the ODBC administrator and tried to add a new System DSN to a Lotus DB. "The setup routines for the Lotus Notes SQL Driver (*.nsf) ODBC driver could not be loaded due to system error code 126" I redownloaded and reinstalled the driver (making sure I had the latest version 8.5). No luck. I checked the registry. All the file paths appeared to be correct. Per many, many similar cases on the internet, I tried several different variations of adding the various Lotus Notes folders to my PATH variables. Same error. I've done this setup on 5 different machines now with no problem. The only difference here is that this machine is virtual. Ideas?

    Read the article

  • The Message Queuing service failed to join the computer's domain 'DOMAIN' Error 0xc00e0025

    - by SimonGoldstone
    Struggling to get MSMQ installed in Domain Integration mode on Windows 2012 (Azure). So far, I've provisioned a brand new Windows Server 2012 (R2) machine on the Azure platform and installed the Active Directory role and promoted the machine to a domain controller. Once the AD was in place, I then added the MSMQ feature, along with the Directory Integration add on. However, it will not install in AD integration mode. It will only work in Workgroup mode. I can verify this by running the following powershell command: New-MSMQQueue -name Queue1 -queuetype Public When I run this command, I get the following error: New-MsmqQueue : A workgroup installation computer does not support the operation. The event viewer reveals to errors in the Application log: 1. The Message Queuing service failed to join the computer's domain 'DOMAIN'. Error 0xc00e0025: 2. Message Queuing was unable to create the msmq (MSMQ Configuration) object in Active Directory Domain Services. Error c00e0025h: I'm struggling here. Any advice?

    Read the article

  • Problem with XLSX file on Office 2003 with Compatibility Pack

    - by MadBoy
    I've this machine which has Office 2003 installed with Compatibility Pack. User received one file which she has to work with in XLSX format (file has to stay in that format so options to save it as XLS can be skipped). When she opens the file from Desktop or any other location it gives an error like "Cannot find the file in following location" and in the background it starts Converting XLSX file to XLS. In the end Excel is opened up with some random file name X000008.xls (Read Only) which is just 1 to 1 conversion of the XLSX document. However if I go directly to Excel and use File / Open and try to open the XLSX file no error or conversion is done. The file is writable and can be saved in XLSX format. The file name is simple like This_file something.XLSX, I've even tried to remove all spaces but it gave no better results. Anyone has any recommendations? So far I have done: 1. Uninstalled Compatibility Pack and installed it again. Tried opening it without any other updates and the error still pops out. In progress: I am now running all possible updates of office (like 5 of them) which i suppos won't fix anything (as they were applied when I've uninstalled compatibility pack). Next in run will be (not yet done) installing Windows XP SP3. What other things I can do?

    Read the article

  • How do I leverage Bitlocker cmdlets?

    - by user1418882
    This article hints at being able to unlock a bitlocked drive using: Unlock-BitLocker -MountPoint -Password However, I know diddly squat about Powershell and how to use the Powershell cmdlets to do what I want to do. So, how do I do use the above to do something like the following? Unlock-BitLocker -MountPoint D:\ -Password "password" Currently about as much as I know how to do is start Powershell and that's it. I don't want to learn masses of Powershell to get to the point where I can do this. All that I need to know in enough to know how I can execute the commands that are pointed out in the first link. So far in the powershell prompt if I past in: Unlock-BitLocker -MountPoint D:\ -Password "password" I get the following error: The term 'Unlock-BitLocker' is not recognized as the name of a cmdlet, function, script file, or operable program. Chec k the spelling of the name, or if a path was included, verify that the path is correct and try again. At line:1 char:17 + Unlock-BitLocker <<<< -MountPoint D:\ -Password "password" + CategoryInfo : ObjectNotFound: (Unlock-BitLocker:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException This is most likely because I don't have any clue about how the commands on the initially linked page work in a powershell context. This is so that I can answer my own question here: Bitlocker and scheduled task (powershell) script to unlock non-system drive

    Read the article

  • Configuring external SMTP server on Azure VM - messages staying in queue

    - by Steph Locke
    I have an external SMTP provider: auth.smtp.1and1.co.uk I am trying to send SQL Server Reporting Services emails via this on an Windows 2012 Azure VM. It is configured sufficiently correctly for emails to be generated, but I've not configured something or mis-configured something as the emails then stay in the queue. Setup details Configured SMTP Virtual Server General: IP Address: Fixed value Access: Access Control: Authentication: ticked Anonymous access Access: Connection Control: All except the list below (which is empty) Access: relay restrictions: Only the list below (which contains 127.0.0.1), ticked 'allow all..' option Delivery: Outbound Security...:Basic Authentication with username and password completed, ticked TLS encryption Delivery: Outbound connections...:TCP port=587 Delivery: Advanced: FQDN=ServerName, smarthost=auth.smtp.1and1.co.uk I then set the following SSRS rsreportserver.config values: <SMTPServer>100.92.192.3</SMTPServer> <SendUsing>2</SendUsing> <SMTPServerPickupDirectory> c:\inetpub\mailroot\pickup </SMTPServerPickupDirectory> <From>[email protected]</From> Tried so far 1) turning the smtp service off and on again (just in case) 2) run SMTPDiag with no errors (also no emails) 3) tried turning off the firewall for the ports (and more generally to see if it made a difference) 4) tried generation from powershell which resulted with message in queue 5) added 25 and 857 as endpoint 6) perused the event log and found some warnings that appear to be about the recipient Message delivery to the remote domain 'gmail.com' failed for the following reason: Unable to bind to the destination server in DNS. Message delivery to the host '212.227.15.179' failed while delivering to the remote domain 'gmail.com' for the following reason: The remote server did not respond to a connection attempt. 7) tried pinging but this appears to be blocked on azure 8) tried more powershell sending on different domains variants (localhost, boxname, internal ip used in smtp properties, 127.0.0.1) - none resulting in success 9) tried adding a remote domain - no change Could anyone recommend what step 10 should be in fixing this issue please?

    Read the article

  • BIOS interrupts, privilege levels and paging

    - by Jack
    Hi, I was learning about Intel 8086-80486 CPUs and their interactions with HW. But I still don´t understand it quite well. Please, help me fill blank spots. First, I know that CPU communicates with HW using BIOS interrupts. But, what really happens in PC, when I call some INT instruction? I know that according the interrupt table some instructions begin to execute, but how by executing some instructions can BIOS recognize what I want to do? Becouse as far as I know, CPU has no extra communication channel with BIOS, it can only adress memory and receive data. So how can I instruct BIOS to do something, when I can only address RAM? Next thing I don't understand is about privilege levels. I know about ring model, and access rights, but how does the CPU know which privilege level has executed an instruction? I think that these privileges apply only when intruction is trying to address memory, but how does an application get its privilege level? I mean I know its level 3, but how is it set? And last thing, I know that paging is address scheme that is used to support aplication-transparent virtual memory, or swapping, but I could not find any information about how paging is tied with protected mode. Like if paging is like next mode independent of protected mode, or its somehow implemented within protected mode. And if it is implemented in protected mode, isn´t it too slow, to first address application space, then offset, and then paging folder, page and offset once again?

    Read the article

  • Trying to run an ASP.NET MVC application using Mono on Apache with FastCGI.

    - by Arda Xi
    I have a hosting account with DreamHost, and I would like to use the same account to run ASP.NET applications. I have an application deployed in a subdomain, a .htaccess with a handler like this: # Define the FastCGI Mono launcher as an Apache handler and let # it manage this web-application (its files and subdirectories) SetHandler monoWrapper Action monoWrapper /home/arienh4/<domain>/cgi-bin/mono.fcgi virtual My mono.fcgi is set up as such: #!/bin/sh #umask 0077 exec >>/home/arienh4/tmp/mono-fcgi.log exec 2>>/home/arienh4/tmp/mono-fcgi.err echo $(date +"[%F %T]") Starting fastcgi-mono-server2 cd / chmod 0700 /home/arienh4/tmp/mono-fcgi.sock echo $$>/home/arienh4/tmp/mono-fcgi.pid # stdin is the socket handle export PATH="/home/arienh4/mono/bin:$PATH" export LD_LIBRARY_PATH="/home/arienh4/mono/lib:$LD_LIBRARY_PATH" export TMP="/home/arienh4/tmp" export MONO_SHARED_DIR="/home/arienh4/tmp" exec /home/arienh4/mono/bin/mono /home/arienh4/mono/lib/mono/2.0/fastcgi-mono-server2.exe \ /logfile=/home/arienh4/logs/fastcgi-mono-web.log /loglevels=All \ /applications=/:/home/arienh4/<domain> I took this from the Mono site for CGI, I'm not sure if I'm doing it correctly though. This code is resulting in this error: Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace. I have no idea what's causing this. As far as I can see, Mono isn't even hit (no log files are created).

    Read the article

  • How to avoid lftp Certificate verification error?

    - by pattulus
    I'm trying to get my Pelican blog working. It uses lftp to transfer the actual blog to ones server, but I always get an error: mirror: Fatal error: Certificate verification: subjectAltName does not match ‘blogname.com’ I think lftp is checking the SSL and the quick setup of Pelican just forgot to include that I don't have SSL on my FTP. This is the code in Pelican's Makefile: ftp_upload: $(OUTPUTDIR)/index.html lftp ftp://$(FTP_USER)@$(FTP_HOST) -e "mirror -R $(OUTPUTDIR) $(FTP_TARGET_DIR) ; quit" which renders in terminal as: lftp ftp://[email protected] -e "mirror -R /Volumes/HD/Users/me/Test/output /myblog_directory ; quit" What I managed so far is, denying the SSL check by changing the Makefile to: lftp ftp://$(FTP_USER)@$(FTP_HOST) -e "set ftp:ssl-allow no" "mirror -R $(OUTPUTDIR) $(FTP_TARGET_DIR) ; quit" Due to my incorrect implementation I get logged in correctly (lftp [email protected]:~>) but the one line feature doesn't work anymore and I have to enter the mirror command by hand: mirror -R /Volumes/HD/Users/me/Test/output/ /myblog_directory This works without an error and timeout. The question is how to do this with a one liner. In addition I tried: set ssl:verify-certificate/ftp.myblog.com no This trick to disable certificate verification in lftp: $ cat ~/.lftp/rc set ssl:verify-certificate no However, it seems there is no "rc" folder in my lftp directory - so this prompt has no chance to work.

    Read the article

  • Word 2007 crashes on Server 2008 R2 terminal services

    - by John Rennie
    We are finding that Word 2007 (with SP2) crashes when used on a Windows 2008 R2 terminal server. Typically it crashes when you click File/Open or File/Save, but not every time. Maybe one time in four, and just to be really confusing, on a test server in my office I can't make it crash. I have just today set up a brand new shiny 2k8 R2 terminal server with as simple a setup as possible, e.g. no anti-virus to confuse things, and we're still seeing crashes. My question is has anyone else seen this, and if so any clues on what's happening? We have a support case open with Microsoft, and the MS support engineer has conceded it's happening, but has so far been unable to find the reason. On possible factor is that all the 2k8 R2 terminal servers I've seen this on have been Hyper-V VMs (running on a 2k8 R2 host). I'm about to put in a physical 2k8 R2 terminal server at the customer where we're seeing the most crashes, in case this is relevant. More news soon. Sorry if this posting seems a bit vague, but this has just bitten us and is causing a lot of pain and sleepless nights :-( If anyone can help I'll be enormously grateful! Update: we've given up and gone back to 2008 pre-R2. Both Office 2003 and 2007 both work fine now. I think there are some problems with TS in R2. Googling doesn't find much, so I thought it was just me. It's reassuring to find that someone else has seen the same problem.

    Read the article

  • Extract Key and Certificate from Kemp Loadmaster?

    - by Matt Simmons
    I'm trying very hard to get away from a set of Kemp Loadmasters that I bought years ago to provide HA access to our website. Part of that process is going to be putting the key and certificate in the new solution (HAproxy with nginx doing SSL). Unfortunately, I've come up against a problem... The Kemp has built-in certificate management, and it generates CSR's at the touch of a button. It also supported importing of signed certificates, however it does not, so far as I can tell, allow any kind of export of the key itself. There is a "backup key and certificates" ability, however here's the text from the manual: LoadMaster supports exporting of ALL certificate information. This includes private key, host and intermediate certificates. The export file is designed to be used for import into another LoadMaster and is encrypted. Export and import can be completed using the WUI at Certificates -> Backup/Restore Certs. Please make sure to note the pass phrase used to create the export, it will be required to complete the import. You can selectively resort only Virtual Service certificates including private keys, intermediate certificates or both. Well, that is great, but as for actually DEALING with the certs, I'm apparently out of luck. Of course, I'm not going to give up that easily. I ran "file" on the saved cert bundle and got this: $ file client1.certs.backup client1.certs.backup: gzip compressed data, from Unix Well, awesome, I thought. Maybe it's just a .tar.gz, so I unzipped it, and that went fine, but my attempts to untar it didn't work, and running "file" on it now just gives this: $ file client1.certs.backup client1.certs.backup: data So that's where I'm stuck. Anyone have experience with these?

    Read the article

  • Cisco ASA 5505 allowing inbound ICMPv6

    - by Astron
    I am trying to allow inbound unsolicited ICMPv6 requests from an external link-local address to my outside (external) interfaces link-local address. I can ping (echo-request) the external address and receive a pong (echo-reply) but ICMPv6 messages initiated on the far side are dropped. I am running 9.0(1) in order to use some of the newer features. Does the Cisco ASA not allow unsolicited inbound requests from a link-local address? Should it matter if all ICMPv6 is allowed? Statements being denied: %ASA-3-313008: Denied IPv6-ICMP type=129, code=0 from fe80::XXXX:XXXX:XXXX:XXXX on interface outside %ASA-3-313008: Denied IPv6-ICMP type=131, code=0 from fe80::XXXX:XXXX:XXXX:XXXX on interface outside %ASA-3-313008: Denied IPv6-ICMP type=131, code=0 from fe80::XXXX:XXXX:XXXX:XXXX on interface outside %ASA-3-313008: Denied IPv6-ICMP type=136, code=0 from fe80::XXXX:XXXX:XXXX:XXXX on interface outside %ASA-3-313008: Denied IPv6-ICMP type=136, code=0 from fe80::XXXX:XXXX:XXXX:XXXX on interface outside %ASA-3-313008: Denied IPv6-ICMP type=136, code=0 from fe80::XXXX:XXXX:XXXX:XXXX on interface outside I created both an inbound ACL and ICMP permit statements: access-list OUTSIDE-IN extended permit icmp6 any any access-list OUTSIDE-IN extended permit icmp6 any any membership-report access-list OUTSIDE-IN extended permit icmp6 any any membership-report 0 access-list OUTSIDE-IN extended permit icmp6 any any echo-reply 0 access-list OUTSIDE-IN extended permit icmp6 any any echo-reply access-list OUTSIDE-IN extended permit icmp6 any interface outside membership-report access-list OUTSIDE-IN extended permit icmp6 any interface outside membership-report 0 access-list OUTSIDE-IN extended permit icmp6 any6 any6 echo-reply access-list OUTSIDE-IN extended permit icmp6 any6 any6 membership-report access-list OUTSIDE-IN extended permit icmp6 any6 any6 echo-reply 0 access-list OUTSIDE-IN extended permit icmp6 any6 any6 membership-report 0 snip access-group OUTSIDE-IN in interface outside ipv6 icmp permit any inside ipv6 icmp permit any membership-report outside ipv6 icmp permit any echo-reply outside ipv6 icmp permit any router-advertisement outside ipv6 icmp permit any neighbor-solicitation outside ipv6 icmp permit any neighbor-advertisement outside ipv6 icmp permit any outside

    Read the article

< Previous Page | 401 402 403 404 405 406 407 408 409 410 411 412  | Next Page >