Search Results

Search found 20640 results on 826 pages for 'key combination'.

Page 405/826 | < Previous Page | 401 402 403 404 405 406 407 408 409 410 411 412  | Next Page >

  • Should I continue to pursue programming based on my experience?

    - by El Be
    The reason I ask this question is because I am not sure my troubles come from a lack of confidence, or something much deeper like lack of passion. I'm hoping experienced programmers and developers can help identify the cause of my troubles. To be brief my undergraduate major was in Computer Science, but in a small school and I had the highest gpa in my year in computer science. The first time I ever programmed was once in the 5th grade (using logo) and when I was a freshman in college. I enjoyed programming when I was in school. Then I did an internships where I was expected to produce image processing software and program microchips. I was unsuccessful and produced little results and I hated the job, because I had to figure out everything for myself, did not have any help, and there was a lot of pressure to produce results. Although I tried I could not figure out what to do and was stuck all the time and made me dislike the job. When the internship ended I went to a PhD program for computer science at a prestigious computer science school. I had a very hard time with the course, met people who have been programming since they were 6 and made plenty of applications in their spare time (which I never did, although I tried). I even met many sophomores who understood more than I did. The combination of this and other things have made me feel that programming is not for me, but sometimes I consider a career in programming. I still consider programming as a career because of the career potential (not only just because of money). Based on my experience do you believe my confidence has just been shaken and I should continue to prepare for a programming career, or do you see a lack of passion and it would make it tough to continue programming. thank you for reading and for your advice Thank you for everyone's advice so far! Also: I dropped out of the ph.D program for computer science and switched to a master's in computer graphics. Its more applied, but I still find it hard to be motivated (due to either lack of confidence or passion), but since programming is such a big field I am looking for that niche area that I feel good programming in.

    Read the article

  • Polymorphic associations in CakePHP2

    - by Joseph
    I have 3 models, Page , Course and Content Page and Course contain meta data and Content contains HTML content. Page and Course both hasMany Content Content belongsTo Page and Course To avoid having page_id and course_id fields in Content (because I want this to scale to more than just 2 models) I am looking at using Polymorphic Associations. I started by using the Polymorphic Behavior in the Bakery but it is generating waaay too many SQL queries for my liking and it's also throwing an "Illegal Offset" error which I don't know how to fix (it was written in 2008 and nobody seems to have referred to it recently so perhaps the error is due to it not having been designed for Cake 2?) Anyway, I've found that I can almost do everything I need by hardcoding the associations in the models as such: Page Model CREATE TABLE `pages` ( `id` int(11) NOT NULL AUTO_INCREMENT, `title` varchar(255) COLLATE utf8_unicode_ci NOT NULL, `slug` varchar(255) COLLATE utf8_unicode_ci NOT NULL, `created` datetime NOT NULL, `updated` datetime NOT NULL, PRIMARY KEY (`id`) ) <?php class Page extends AppModel { var $name = 'Page'; var $hasMany = array( 'Content' => array( 'className' => 'Content', 'foreignKey' => 'foreign_id', 'conditions' => array('Content.class' => 'Page'), ) ); } ?> Course Model CREATE TABLE `courses` ( `id` int(11) NOT NULL AUTO_INCREMENT, `title` varchar(255) COLLATE utf8_unicode_ci NOT NULL, `slug` varchar(255) COLLATE utf8_unicode_ci NOT NULL, `created` datetime NOT NULL, `updated` datetime NOT NULL, PRIMARY KEY (`id`) ) <?php class Course extends AppModel { var $name = 'Course'; var $hasMany = array( 'Content' => array( 'className' => 'Content', 'foreignKey' => 'foreign_id', 'conditions' => array('Content.class' => 'Course'), ) ); } ?> Content model CREATE TABLE IF NOT EXISTS `contents` ( `id` int(11) unsigned NOT NULL AUTO_INCREMENT, `class` varchar(30) COLLATE utf8_unicode_ci NOT NULL, `foreign_id` int(11) unsigned NOT NULL, `title` varchar(100) COLLATE utf8_unicode_ci NOT NULL, `content` text COLLATE utf8_unicode_ci NOT NULL, `created` datetime DEFAULT NULL, `modified` datetime DEFAULT NULL, PRIMARY KEY (`id`) ) <?php class Content extends AppModel { var $name = 'Content'; var $belongsTo = array( 'Page' => array( 'foreignKey' => 'foreign_id', 'conditions' => array('Content.class' => 'Page') ), 'Course' => array( 'foreignKey' => 'foreign_id', 'conditions' => array('Content.class' => 'Course') ) ); } ?> The good thing is that $this->Content->find('first') only generates a single SQL query instead of 3 (as was the case with the Polymorphic Behavior) but the problem is that the dataset returned includes both of the belongsTo models, whereas it should only really return the one that exists. Here's how the returned data looks: array( 'Content' => array( 'id' => '1', 'class' => 'Course', 'foreign_id' => '1', 'title' => 'something about this course', 'content' => 'The content here', 'created' => null, 'modified' => null ), 'Page' => array( 'id' => null, 'title' => null, 'slug' => null, 'created' => null, 'updated' => null ), 'Course' => array( 'id' => '1', 'title' => 'Course name', 'slug' => 'name-of-the-course', 'created' => '2012-10-11 00:00:00', 'updated' => '2012-10-11 00:00:00' ) ) I only want it to return one of either Page or Course depending on which one is specified in Content.class UPDATE: Combining the Page and Course models would seem like the obvious solution to this problem but the schemas I have shown above are just shown for the purpose of this question. The actual schemas are actually very different in terms of their fields and the each have a different number of associations with other models too. UPDATE 2 Here is the query that results from running $this->Content->find('first'); : SELECT `Content`.`id`, `Content`.`class`, `Content`.`foreign_id`, `Content`.`title`, `Content`.`slug`, `Content`.`content`, `Content`.`created`, `Content`.`modified`, `Page`.`id`, `Page`.`title`, `Page`.`slug`, `Page`.`created`, `Page`.`updated`, `Course`.`id`, `Course`.`title`, `Course`.`slug`, `Course`.`created`, `Course`.`updated` FROM `cakedb`.`contents` AS `Content` LEFT JOIN `cakedb`.`pages` AS `Page` ON (`Content`.`foreign_id` = `Page`.`id` AND `Content`.`class` = 'Page') LEFT JOIN `cakedb`.`courses` AS `Course` ON (`Content`.`foreign_id` = `Course`.`id` AND `Content`.`class` = 'Course') WHERE 1 = 1 LIMIT 1

    Read the article

  • why i am getting popup message when I am tryiing to update user.

    - by kumar
    I am getting Popup mesage something like You have chosen to open Update which is a:application/json From : http://localhost:1234 which ok cancel buttons.. I am using this code to run.. [HttpPost] public JsonResult MEdit(ExpenseBE e) { var cache = CacheFactory.GetCacheManager(); string F_ACTION = "U"; string F_DEBUG = "Y"; var excUpdateStatus = false; for (int i = 0; i <= cache.Count; i++) { var x = (ExpenseBE)cache.GetData("a" + i); if (x != null) { string Resolutioncode = e.Exception.ResolutionCode; string reasoncode = e.Exception.ReasonCode; string actioncode = e.Exception.ActionCode; e.Exception.ExceptionID = x.Exception.ExceptionID; e.Exception.ReasonCode = reasoncode; e.Exception.ReasonCode = Resolutioncode; e.Exception.ActionCode = actioncode; e.Exception.Sequence = x.Exception.Sequence; e.Exception.FollowupDate = x.Exception.FollowupDate; e.Exception.IOL = x.Exception.IOL; e.Exception.LastUpdateUser = User.Identity.Name.ToUpper().Remove(0, 4); excUpdateStatus = common.UpdateException(e.Exception, F_ACTION, F_DEBUG); } } return Json(excUpdateStatus.ToString()); } and my view is <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<NorthernTrust.ATP.iTool.Core.Business.Entities.Specialist.ExpenseBE>" %> <% using (Html.BeginForm("MEdit", "expense", FormMethod.Post)) { %> <%= Html.ValidationSummary(true)%> <fieldset class="clearfix" id="fieldset-exception"> <legend>Mass Edit Exception Information</legend> <div class="fiveper"> <label for="ExceptionStatus"> Status: <span> </span> </label> <label for="ResolutionCode"> Resolution: <span> <%=Html.DropDownListFor(model=>model.Exception.ResolutionCode,new SelectList(Model.LookupCodes["C_EXCPT_RESL"], "Key", "Value"))%> </span> </label> <label for="ReasonCode"> Reason: <span><%=Html.DropDownListFor(model => model.Exception.ReasonCode, new SelectList(Model.LookupCodes["C_EXCPT_RSN"], "Key", "Value"))%></span> </label> <label for="ExceptionStatus"> Action Taken: <span><%=Html.DropDownListFor(model => model.Exception.ActionCode, new SelectList(Model.LookupCodes["C_EXCPT_ACT"], "Key", "Value"))%></span> </label> </div> <div class="fiveper"> <label for="FollowupDate"> Follow-up: <span><input type="text" id="exc-flwup-" /></span> <%--<%=Html.EditorFor(model=>model.Exception.FollowupDate) %>--%> </label> <label for="IOL"> Inquiry #: <%=Html.TextBox("Inquiery", ViewData["inq"] ?? "")%> </label> <label>Comment</label> <span> <%=Html.TextArea("value") %> <%=Html.ValidationMessage("value")%> </span> </div> <br /> <br /> <div> <button id="btnSelect" class="button">Select All</button> <button id="btnCancel" class="button">Cancel</button> <input type="submit" class="button" value="Save" /> </div> </fieldset> <% } %> <script type="text/javascript"> $(document).ready(function() { $('#btnSelectAll').click(function() { function validate_excpt(formData, jqForm, options) { var form = jqForm[0]; } $('#btnSelect').click(function() { $('#input [type=checkbox]').attr('checked', 'checked'); }); // post-submit callback function showResponse(responseText, statusText, xhr, $form) { if ('success' == statusText) { $('#error-msg span:last').html('<strong>Update successful.</strong>'); } else { $('#error-msg span:last').html('<strong>Update failed.</strong> ' + responseText); } $('#error-msg').removeClass('hide'); } $('#exc').ajaxForm({ target: '#error-msg', beforeSubmit: validate_excpt, success: showResponse, dataType: 'json' }); $('.button').button(); }); $('.button').button(); $("input[id^='exc-flwup-']").datepicker({ duration: '', showTime: true, constrainInput: true, stepMinutes: 30, stepHours: 1, altTimeField: '', time24h: true, minDate: 0 }); $('#ui-timepicker-div').bgiframe(); }); </script> please correct me if i am doing somwhere wrong? thanks

    Read the article

  • Data Source Use of Oracle Edition Based Redefinition (EBR)

    - by Steve Felts
    Edition-based redefinition is a new feature in the 11gR2 release of the Oracle database. It enables you to upgrade the database component of an application while it is in use, thereby minimizing or eliminating down time. It works by allowing for a pre-upgrade and post-upgrade view of the data to exist at the same time, providing a hot upgrade capability. You can then specify which view you want for a particular session.  See the Oracle Database Advanced Application Developer's Guide for further information. There is also a good white paper at Edition Based Definition. Using this feature of the Oracle database does not require any new WebLogic Server functionality. It is set for each connection in the pool automatically by simply specifying SQL ALTER SESSION SET EDITION = edition_name in the Init SQL parameter in the data source configuration. This can be configured either via the console or via WLST (setInitSQL on the JDBCConnectionPoolParams). This SQL statement is executed for each newly created physical database connection.Note that we are assuming that a data source references only one edition of the database. To make use of this feature, you would have an earlier version of the application with a data source that references the earlier EDITION and a later version of the application with a data source that references the later EDITION.   Once you start talking about multiple versions of a WLS application, you should be using the WLS "side-by-side" or "versioned" deployment feature.  See Developing Applications for Production Redeployment for more information.  By combining Oracle database EBR and WLS versioned deployment, the application can be failed over with no downtime, making the combination of features more powerful than either independently. There is a catch - you need to be running with a versioned database and a versioned application initially so then you can switch versions.  The recommended way to version a WLS application is to simply add the "Weblogic-Application-Version" property in the MANIFEST.MF file(you can also specify it at deployment time). The recommended way to configure the data source is to use a packaged data source descriptor that's stored in the ear or war so that everything is self-contained.  There are some restrictions.  You can't use a packaged data source with Logging Last Resource (LLR) - you need to use a system resource.  You can't use an application-scoped packaged data source with EmulateTwoPhaseCommit for the global-transactions-protocol with a versioned application - use a global scope.  See Configuring JDBC Application Modules for Deployment for more details. There's one known problem - it doesn't work correctly with an XA data source (patch available with bug 14075837).

    Read the article

  • Taking a Chomp out of a (Social Network) Product Hype

    - by kellsey.ruppel
    Andrew Kershaw, Senior Director Oracle Social Network Product Development, speaks about Oracle Social Network One of our competitors is being very aggressive with its own developed Social Network add-on, but there should be no doubt in the minds that the Oracle social capabilities available with Fusion CRM stack up well against it. Within the Oracle Cloud, we have announced a product called Oracle Social Network. That technology is pre-integrated into Fusion Applications, enabling your customer to build a collaborative and social enterprise (without all the noise!). Oracle Social Network is designed together with our Fusion Applications. It is very conveniently pre-integrated with CRM, HCM, Financials, Projects, Supply Chain, and the Fusion family. But what's even better is that the individual teams can take a considered approach to what they are trying to achieve within the collaboration process and the outcome they are trying to enable. Then they can utilize the network and collaboration tools to support that result. And there's more! The Fusion teams can design social interactions that bridge across and outside their individual product lines because we have more than just a product line and they know they have the social network to connect them. I know we have a superior product, but it is our ability to understand and execute across the enterprise that will enable us to deliver a much more robust and capable platform in the short term than our competitor can. We have built a product specifically designed for enterprise social collaboration which is not the same for the competition. We have delivered a much more effective solution - one in which individuals can easily collaborate to get results, while being confident that they know who has access to their information. Our platform has been pre-built to cross the company boundaries and enable our customers to collaborate, not just with their customers, but with their partners and suppliers as well. So Fusion addresses the combination of the enterprise application suite with enterprise collaboration and social networking. Oracle Social Network already has a feature function advantage over our competitor's tool providing a real added value to the employees. Plus Oracle has the ability to execute in a broad enterprise and cross-enterprise way that our competitors cannot. We have the power of a tool that provides the core social fabric across all of the applications, as well as supporting enterprise collaboration. That allows us to provide intelligent business insight, connections, and recommendations that our competitor simply can't. From our competitors, customers get integration for Sales; they get integration for Service, but then they have to integrate every other enterprise asset that they have by themselves. With Oracle, we are doing the integration. Fusion Applications will be pre-integrated, and over time, all of the applications in the business suite, including our Applications Unlimited and specialist industry applications, will connect to the Oracle Social Network. I'm confident these capabilities make Oracle Social Network the only collaboration platform on which to deliver the social enterprise.

    Read the article

  • Fast Data Executive Round Table FY14 event kit

    - by JuergenKress
    We are very interested to run joint marketing events jointly with you as our partners! At our SOA Community Workspace (SOA Community membership required) you can find a new Fast Data Executive Round Table FY14 event kit. This event is designed at senior IT and executives level for the purposes of education, awareness, and thought leadership around the subject of big data; and a specific flavor of big data - Fast Data - that has begun to spark the imagination of many Oracle customers. Fast Data is not new. It’s a term that was invented initially by Ovum’s Tony Baer as a way to represent the collection of ‘high velocity’ solutions with respect to the big data. For Oracle, the Fast Data campaign in FY13 began as a way to tie a broader set of solutions together (SOA/Business Process Management, Data Integration and Business Analytics) under a set of use cases focused on real-time, high velocity data. It has helped to give Oracle a leap-frog advantage over many of the niche integration vendors (i.e. Informatica, Pega, Tibco, Software AG, Terracotta) who haven’t been able to address these types of end-to-end use cases which rely on the combination of filtering, in-memory data processing, correlation, real-time data movement and transformation, end-to-end analytics, and business process management. Only Oracle can address all the dimensions of fast data, and only Oracle can provide a set of engineered solutions to address this space. This event is designed to continue that thought leadership momentum and raise the awareness about what Oracle Fast Data solutions are designed to solve. It’s designed to highlight real customer solutions and articulate the business benefits that fast data can address. This is not an event that gets into the esoteric technical standards of Hadoop, NoSQL, and in-memory data grids. This is an event that instead gets into the heart of business problems that big data has left un-addressed and charts the path for next steps in fast data. Get the Fast Data Executive Round Table FY14 event kit here. Support marketing campaigns We can support such events by: Oracle speakers - contact your partner manager Marketing budget - contact your A&C marketing manager Event location - free use of Oracle Customer Visitor Centers conference rooms Promote your event at events.oracle.com: http://tinyurl.com/eventspecialized E-Blast: invite customers to your event – contact your A&C marketing manager For additional marketing kits e.g for Business Process Managementplease visit our SOA Community Workspace. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags:

    Read the article

  • Enterprise with eyes on NoSQL

    - by thegreeneman
    Since joining Oracle a few months back, I have had the fortune of being able to interact with a number of large enterprise organizations and discuss their current state of adoption for NoSQL database technology.   It is worth noting that a large percentage of these organizations do have some NoSQL use and have been steadily increasing their understanding of its applicability for certain data management workloads.   Thru those discussions I’ve learned that it seems one of the biggest issues confronting enterprise adoption of NoSQL databases is the lack of standards for access, administration and monitoring.    This was not so much of an issue with the early adopters of NoSQL technology because they employed a highly DevOps centric approach to application deployment leaving a select few highly qualified developers with the task of managing the production of the system that they designed and implemented. However, as NoSQL technology moves out of the startup and into the hands of larger corporate entities, developers with a broad skill set that are capable of both development and I.T. type production management are in short supply and quickly get moved on to do new projects, often moving to different roles within the company.  This difference in the way smaller more agile startups operate as compared to more established companies is revealing a gap in the NoSQL technology segment that needs to get addressed.    This is one of places that a company such as Oracle has a leg up in the NoSQL Database front.  A combination of having gone thru a past database maturization process,  combined with a vast set of corporate relationships that have grown hand in hand to solve these types of issues, Oracle is in a great place to lead the way in closing the requirements gap for NoSQL technology.  Oracle's understanding of the needs specific to mature organizations have already made their way into the Oracle’s NoSQL Database offering with features such as:  One click cluster deployment with visual topology planning,  standards based monitoring protocols such as SNMP, support for data access for reporting via standard SQL  and integration with emerging standards for data access such as MapReduce.  Given the exciting developments we’re driving in the Oracle NoSQL Database group, I will have a lot more to say about this topic as we move into the second half of the year.

    Read the article

  • If most of team can't follow the architecture, what do you do?

    - by Chris
    Hi all, I'm working on a greenfields project with two other developers. We're all contractors, and myself and one other just started working on the project while the orginal one has been doing most of the basic framework coding. In the past month, my fellow programmer and I have been just frustrated by the design descisions done by our co-worker. Here's a little background information: The application at face value appeared to be your standard n-layered web application using C# on the 3.5 framework. We have a data layer, business layer and a web interface. But as we got deeper into the project we found some very interesting things that have caused us some troubles. There is a custom data access sqlHelper type base which only accepts dictionary key/valued entries and returns only data tables. There are no entity objects, but there are some massive objects which do everything and then are tossed into session for persitance. The general idea is that the pages (.aspx) don't do anything, while the controls (.ascx) do everything. The general flow is that a client clicks on a button, which goes to a user control base which passes a process request to the 'BLL' class which goes to the page processor, which then goes to a getControlProcessor, which at last actually processes the request. The request itself is made up of a dictionary which is passing a string valued method name, stored procedure name, a control name and possibly a value. All switching of the processing is done by comparing the string values of the control names and method names. Pages are linked together via a common header control that uses a combination of javascript and tables to create a hyperlink effect. And as I found out yesterday, a simple hyperlink between one page and another does not work because of the need to have quite a bit of information in session to determine which control to display on a page. My fellow programmer and I both believe that this is a strange and uncommon approach to web application development. Both of us have been in this business for over five years and neither of us have seen this approach. My question is this, how would we approach our co-worker and voice our concerns and what should we do if he does not want to accept the criteic? We both do not want to insult the work that has been done, but feel that going forward will create a nightmare for development. Thanks for your comments.

    Read the article

  • EBusiness Maintenace Wizard

    - by cwarticki
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Seriously folks, you'd be amazed by the power and functionality of this tool.  If you're an EBus customer, you must use the Maintenance Wizard.  I know customers that have logged 2000+ SRs doing EBus upgrades the hard way and others that have use the Maintenance Wizard and have performed production upgrades on 7 global instances with only a handful of SRs.  You decide which is better. Oh, btw......it's part of your Premier Support investment. No additional cost necessary. -Chris Warticki The Maintenance Wizard is an E-Business Suite upgrade tool that can guide you through the code line upgrade process from 11.5.10.2 to 12.1.3 with an 11gR2 database. Additionally, it includes maintenance features for most releases of E-Business Suite applications. The Tool: * Presents step-by-step upgrade and maintenance processes * Enables validation of each step, tracks the completion of the steps, and maintains a log and status * Is a multi-user tool that enables the System Administrator to give different users assignments based on any combination of category, product family or task * Automatically installs many required patches * Provides project management utilities to record the time taken for each task, completion status and project reporting For More Information: * Review Note 215527.1 for additional information on the Maintenance Wizard * See Note 430732.1 to download the new Patch Sincerely, Oracle Proactive Support Center

    Read the article

  • Toshiba wireless is blocked

    - by zorrillo
    I have the same problem, a 32 bits toshiba nb255, it first had the windows 7 bu next I installed the ubuntu 11.04. The wifi does not turn on. I used the following issues the commands rfkill unblock wlan0, sudo ifconfig wlan0 down; they were not able. by setting up the bios in advanced menu, the wireless communication sw in ON, but it did not work also. neither the utilities toshiba nor utilities of ubuntu (wicd, wifi radar). by using gedit to file group, nothing. by installing madwifi packet, nothing. by exporting the wifi driver from windows to ubuntu, by means of the NDISwrapper packet, neither. I put the current scripts of the ouput of the cli root@zorrillo:~# rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes root@zorrillo:~# sudo lspci | grep Atheros 07:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) root@zorrillo:~# root@zorrillo:~# ifconfig -a eth0 Link encap:Ethernet direcciónHW 88:ae:1d:47:df:e1 ACTIVO DIFUSIÓN MULTICAST MTU:1500 Métrica:1 Paquetes RX:0 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:0 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:0 (0.0 B) TX bytes:0 (0.0 B) Interrupción:43 Dirección base: 0xe000 lo Link encap:Bucle local Direc. inet:127.0.0.1 Másc:255.0.0.0 Dirección inet6: ::1/128 Alcance:Anfitrión ACTIVO BUCLE FUNCIONANDO MTU:16436 Métrica:1 Paquetes RX:8 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:8 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:0 Bytes RX:480 (480.0 B) TX bytes:480 (480.0 B) ppp0 Link encap:Protocolo punto a punto Direc. inet:189.203.115.236 P-t-P:192.168.226.1 Másc:255.255.255.255 ACTIVO PUNTO A PUNTO FUNCIONANDO NOARP MULTICAST MTU:1500 Métrica:1 Paquetes RX:6384 errores:30 perdidos:0 overruns:0 frame:0 Paquetes TX:6893 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:3 Bytes RX:5473081 (5.4 MB) TX bytes:974316 (974.3 KB) wlan0 Link encap:Ethernet direcciónHW 00:26:4d:c3:d0:44 DIFUSIÓN MULTICAST MTU:1500 Métrica:1 Paquetes RX:0 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:0 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:0 (0.0 B) TX bytes:0 (0.0 B) note.-it is logical all the counters are cero if the wireless device is down root@zorrillo:/home/zorrillo/Descargas/802BGA# ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill root@zorrillo:/home/zorrillo/Descargas/802BGA# It would seem the wireless switching does not react with whichever ubuntu 11.04 command (I hope to be wrong). The target remains the same, in order of the scripts above. I am worried, I have tried to find any answer for days and nights. Toshiba does not supply drivers or soft support for linux, marketing of course. I only see the device is up by protocols and down phisically, My question is, is it possible to enable or not shutdown physically the device?, because in the toshiba model nb255 the wifi is not set up/down bye means of a physical switch, but by means a combination of Fn + F8 (only for windows 7, no one more), Is there one possibility to configure the hot keys in ubuntu?

    Read the article

  • Are these non-standard applications of rendering practical in games?

    - by maul
    I've recently got into 3D and I came up with a few different "tricky" rendering techniques. Unfortunately I don't have the time to work on this myself, but I'd like to know if these are known methods and if they can be used in practice. Hybrid rendering Now I know that ray-tracing is still not fast enough for real-time rendering, at least on home computers. I also know that hybrid rendering (a combination of rasterization and ray-tracing) is a well known theory. However I had the following idea: one could separate a scene into "important" and "not important" objects. First you render the "not important" objects using traditional rasterization. In this pass you also render the "important" objects using a special shader that simply marks these parts on the image using a special color, or some stencil/depth buffer trickery. Then in the second pass you read back the results of the first pass and start ray tracing, but only from the pixels that were marked by the "important" object's shader. This would allow you to only ray-trace exactly what you need to. Could this be fast enough for real-time effects? Rendered physics I'm specifically talking about bullet physics - intersection of a very small object (point/bullet) that travels across a straight line with other, relatively slow-moving, fairly constant objects. More specifically: hit detection. My idea is that you could render the scene from the point of view of the gun (or the bullet). Every object in the scene would draw a different color. You only need to render a 1x1 pixel window - the center of the screen (again, from the gun's point of view). Then you simply check that central pixel and the color tells you what you hit. This is pixel-perfect hit detection based on the graphical representation of objects, which is not common in games. Afaik traditional OpenGL "picking" is a similar method. This could be extended in a few ways: For larger (non-bullet) objects you render a larger portion of the screen. If you put a special-colored plane in the middle of the scene (exactly where the bullet will be after the current frame) you get a method that works as the traditional slow-moving iterative physics test as well. You could simulate objects that the bullet can pass through (with decreased velocity) using alpha blending or some similar trick. So are these techniques in use anywhere, and/or are they practical at all?

    Read the article

  • Accounting for waves when doing planar reflections

    - by CloseReflector
    I've been studying Nvidia's examples from the SDK, in particular the Island11 project and I've found something curious about a piece of HLSL code which corrects the reflections up and down depending on the state of the wave's height. Naturally, after examining the brief paragraph of code: // calculating correction that shifts reflection up/down according to water wave Y position float4 projected_waveheight = mul(float4(input.positionWS.x,input.positionWS.y,input.positionWS.z,1),g_ModelViewProjectionMatrix); float waveheight_correction=-0.5*projected_waveheight.y/projected_waveheight.w; projected_waveheight = mul(float4(input.positionWS.x,-0.8,input.positionWS.z,1),g_ModelViewProjectionMatrix); waveheight_correction+=0.5*projected_waveheight.y/projected_waveheight.w; reflection_disturbance.y=max(-0.15,waveheight_correction+reflection_disturbance.y); My first guess was that it compensates for the planar reflection when it is subjected to vertical perturbation (the waves), shifting the reflected geometry to a point where is nothing and the water is just rendered as if there is nothing there or just the sky: Now, that's the sky reflecting where we should see the terrain's green/grey/yellowish reflection lerped with the water's baseline. My problem is now that I cannot really pinpoint what is the logic behind it. Projecting the actual world space position of a point of the wave/water geometry and then multiplying by -.5f, only to take another projection of the same point, this time with its y coordinate changed to -0.8 (why -0.8?). Clues in the code seem to indicate it was derived with trial and error because there is redundancy. For example, the author takes the negative half of the projected y coordinate (after the w divide): float waveheight_correction=-0.5*projected_waveheight.y/projected_waveheight.w; And then does the same for the second point (only positive, to get a difference of some sort, I presume) and combines them: waveheight_correction+=0.5*projected_waveheight.y/projected_waveheight.w; By removing the divide by 2, I see no difference in quality improvement (if someone cares to correct me, please do). The crux of it seems to be the difference in the projected y, why is that? This redundancy and the seemingly arbitrary selection of -.8f and -0.15f lead me to conclude that this might be a combination of heuristics/guess work. Is there a logical underpinning to this or is it just a desperate hack? Here is an exaggeration of the initial problem which the code fragment fixes, observe on the lowest tessellation level. Hopefully, it might spark an idea I'm missing. The -.8f might be a reference height from which to deduce how much to disturb the texture coordinate sampling the planarly reflected geometry render and -.15f might be the lower bound, a security measure.

    Read the article

  • Criteria for a programming language to be considered "mature"

    - by Giorgio
    I was recently reading an answer to this question, and I was struck by the statement "The language is mature". So I was wondering what we actually mean when we say that "A programming language is mature"? Normally, a programming language is initially developed out of a need, e.g. Try out / implement a new programming paradigm or a new combination of features that cannot be found in existing languages. Try to solve a problem or overcome a limitation of an existing language. Create a language for teaching programming. Create a language that solves a particular class of problems (e.g. concurrency). Create a language and an API for a special application field, e.g. the web (in this case the language might reuse a well-known paradigm, but the whole API must be new). Create a language to push your competitor out of the market (in this case the creator might want the new language to be very similar to an existing one, in order to attract developers to the new programming language and platform). Regardless of what the original motivation and scenario in which a language has been created, eventually some languages are considered mature. In my intuition, this means that the language has achieved (at least one of) its goals, e.g. "We can now use language X as a reliable tool for writing web applications." This is however a bit vague, so I wanted to ask what you consider the most important criteria (if any) that are applied when saying that a language is mature. IMPORTANT NOTE This question is (on purpose) language-agnostic because I am only interested in general criteria. Please write only language-agnostic answers and comments! I am not asking whether any specific "language X is mature" or "which programming languages can be considered mature", or whether "language X is more mature than language Y": please avoid posting any opinions or reference about any specific languages because these are out of the scope of this question. EDIT To make the question more precise, by criteria I mean such things as "tool support", "adoption by the industry", "stability", "rich API", "large user community", "successful application record", "standardization", "clean and uniform semantics", and so on.

    Read the article

  • how to validate the form using jquery

    - by kumar
    I have this Fieldset values.. <fieldset class="clearfix" id="fieldset-exception"> <legend>Mass Edit Exception Information</legend> <div id="#error-msg-ID" class="ui-widget hide"> <div class="ui-state-highlight ui-corner-all"> <p><span style="float: left; margin-right: 0.3em;" class="ui-icon ui-icon-info"></span> <span></span></p> </div> </div> <div class="fiveper"> <label for="ExceptionStatus"> Status: <span> </span> </label> <label for="ResolutionCode"> Resolution: <span> <%=Html.DropDownListFor(model => model.Exception.ResolutionCode, new SelectList(Model.LookupCodes["C_EXCPT_RESL"], "Key", "Value"))%> </span> </label> <label for="ReasonCode"> Reason: <span><%=Html.DropDownListFor(model => model.Exception.ReasonCode, new SelectList(Model.LookupCodes["C_EXCPT_RSN"], "Key", "Value"))%></span> </label> <label for="ExceptionStatus"> Action Taken: <span><%=Html.DropDownListFor(model => model.Exception.ActionCode, new SelectList(Model.LookupCodes["C_EXCPT_ACT"], "Key", "Value"))%></span> </label> </div> <div class="fiveper"> <label for="FollowupDate"> Follow-up: <span><input type="text" id="exc-flwup" name="fdate" /></span> <%--<%=Html.EditorFor(model=>model.Exception.FollowupDate) %>--%> </label> <label for="IOL"> Inquiry #: <%=Html.TextBox("Inquiry", ViewData["inq"] ?? "")%> </label> <label>Comment</label> <span> <%=Html.TextArea("value", ViewData["Comnt"] ?? "")%> <%=Html.ValidationMessage("value")%> </span> </div> <br /> <br /> <div> <input type="submit" class="button" value="Save" /> </div> </fieldset> before submiting I need to do some time of validation..below validation not working for me is that right what I am doing here? These all fieds user is entering from UI.. thanks <script type="text/javascript"> $(document).ready(function() { $('#btnSelectAll').click(function() { $('#EditExceptions input[name=chk]').attr('checked', true); }); $('#btnCancel').click(function() { $('#EditExceptions input[name=chk]').attr('checked',false); }); function validate_excpt(formData, jqForm, options) { var form = jqForm[0]; **if (form.e_Exception_ResolutionCode.value && !form.e_Exception_ReasonCode.value) { alert('All Resolution Codes need a Reason Code.'); return false; }** } // post-submit callback function showResponse(responseText, statusText, xhr, $form) { if (responseText[0].substring(0, 16) != "System.Exception") { $('#error-msg-ID span:last').html('<strong>Update successful.</strong>'); $().ShowDialog('Success', 'Update successful'); } else { $('#error-msg-ID span:last').html('<strong>Update failed.</strong> ' + responseText[0].substring(0, 48)); $().ShowDialog('Failed', 'Update failed'); } $('#error-msg-ID').removeClass('hide'); $('#gui-stat-').html(responseText[1]); } $('#exc-').ajaxForm({ beforeSubmit: validate_excpt, success: showResponse, dataType: 'json' }); $('.button').button(); $("input[id^='exc-flwup']").datepicker({ duration: '', showTime: true, constrainInput: true, stepMinutes: 30, stepHours: 1, altTimeField: '', time24h: true, minDate: 0 }); $('#ui-timepicker-div').bgiframe(); }); </script>

    Read the article

  • Determining whether a visitor reached two different pages in one visit

    - by Shaun
    I have a funnel that I would like to track. Tracking this funnel won't work with the default "goal funnel" tracking in Google due to the fact that I am mixing events and pageviews. As such, I've created a series of reports: Visits to demo pages - An inclusion filter on "Page". Triggers an Event on these pages - An inclusion filter on "Page" and "Event Category". Does not bounce - An inclusion filter on "Page" and an exclusion filter on "Exit Page" for these same pages. Reach our storefront - ?? Purchase something - An inclusion filter on "Page" and a report that shows "Transactions". At a basic level, I need to track users who reached demo pages, then reached any page on our store. Intuitively, I created a segment, used two inclusive "Page" filters (one for the demo pages and one for any page in our store), and combined them with an "AND" operator. I thought this was working until I tried to do the same thing in a dashboard widget and on a custom report. When I tried the same thing in those areas, I got zero results. I figured this might be because widgets and custom report filters function differently from segment filters (the options are different for all of them), so I tried applying my "demo page && store page" segment to a report that gave me a general page list. All I saw was a list of the specific pages. I tried simplifying things by creating a custom report that showed all visits to store pages, then applied a segment that filtered for users who visited demo pages. This got me the same numbers as my "demo page && store page" segment, but showed a list of demo pages. This has led me to believe that the "demo page && store page segment" approach and the "demo segment && store report" functionally behave the same. However, this experience has left me questioning whether they're giving me what I want. Are these methods showing me all users who reached both sets of pages? Is there a better/easier/more standard way of doing this aside from looking at visitor flow reports? I'm trying to avoid a combination of custom variables/events and using the horizontal funnel approach since it would consume a large number of our limited goals and seems more complicated than is necessary for tracking this funnel.

    Read the article

  • OSB unit testing, part 1 by Qualogy

    - by JuergenKress
    First you need to implement the simple bpel process like this : In my current project, I inherited a lot of OSB components that have been developed by (former) team members, but they all lack unit tests. This is a situation I really dislike, since this makes it much harder to refactor or bug-fix the existing code base. So, for all newly created components (and components I have to bug-fix) I strive to add unit tests. Of course, the unit tests will be created using my favourite testing tool: soapUI ! Unit of test The unit test should be created for the service composition, which in OSB terms should be the proxy service combination with its business service. Now, since you do not want to rely on any other services, you should provide mock services for all services invoked from your Component-Under-Test. In a previous article, I wrote about mocking your services in soapUI. While this approach would also be valid here, creating a mock service (and certainly deploying it on a separate WebServer) does violate one of the core principles of unit testing: to make your unit tests as self-contained as possible, i.e. not depending on any external components. In this article, I will show you how to achieve this by simply providing a mock response inside your unit test. Scenario The scenario I implement for testing is a simple currency converter; the external request consists of a from and a to currency, and an amount (in currency from). The service will perform an exchange rate lookup using the WebServiceX CurrencyConverter and return a response to the caller consisting of both the source and target currencies and amounts. For the purpose of unit testing, I will implement a mock response for the exchange rate lookup. Read the complete article here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Technorati Tags: Qualogy,OSB,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • Which workaround to use for the following SQL deadlock?

    - by Marko
    I found a SQL deadlock scenario in my application during concurrency. I belive that the two statements that cause the deadlock are (note - I'm using LINQ2SQL and DataContext.ExecuteCommand(), that's where this.studioId.ToString() comes into play): exec sp_executesql N'INSERT INTO HQ.dbo.SynchronizingRows ([StudioId], [UpdatedRowId]) SELECT @p0, [t0].[Id] FROM [dbo].[UpdatedRows] AS [t0] WHERE NOT (EXISTS( SELECT NULL AS [EMPTY] FROM [dbo].[ReceivedUpdatedRows] AS [t1] WHERE ([t1].[StudioId] = @p0) AND ([t1].[UpdatedRowId] = [t0].[Id]) ))',N'@p0 uniqueidentifier',@p0='" + this.studioId.ToString() + "'; and exec sp_executesql N'INSERT INTO HQ.dbo.ReceivedUpdatedRows ([UpdatedRowId], [StudioId], [ReceiveDateTime]) SELECT [t0].[UpdatedRowId], @p0, GETDATE() FROM [dbo].[SynchronizingRows] AS [t0] WHERE ([t0].[StudioId] = @p0)',N'@p0 uniqueidentifier',@p0='" + this.studioId.ToString() + "'; The basic logic of my (client-server) application is this: Every time someone inserts or updates a row on the server side, I also insert a row into the table UpdatedRows, specifying the RowId of the modified row. When a client tries to synchronize data, it first copies all of the rows in the UpdatedRows table, that don't contain a reference row for the specific client in the table ReceivedUpdatedRows, to the table SynchronizingRows (the first statement taking part in the deadlock). Afterwards, during the synchronization I look for modified rows via lookup of the SynchronizingRows table. This step is required, otherwise if someone inserts new rows or modifies rows on the server side during synchronization I will miss them and won't get them during the next synchronization (explanation scenario to long to write here...). Once synchronization is complete, I insert rows to the ReceivedUpdatedRows table specifying that this client has received the UpdatedRows contained in the SynchronizingRows table (the second statement taking part in the deadlock). Finally I delete all rows from the SynchronizingRows table that belong to the current client. The way I see it, the deadlock is occuring on tables SynchronizingRows (abbreviation SR) and ReceivedUpdatedRows (abbreviation RUR) during steps 2 and 3 (one client is in step 2 and is inserting into SR and selecting from RUR; while another client is in step 3 inserting into RUR and selecting from SR). I googled a bit about SQL deadlocks and came to a conclusion that I have three options. Inorder to make a decision I need more input about each option/workaround: Workaround 1: The first advice given on the web about SQL deadlocks - restructure tables/queries so that deadlocks don't happen in the first place. Only problem with this is that with my IQ I don't see a way to do the synchronization logic any differently. If someone wishes to dwelve deeper into my current synchronization logic, how and why it is set up the way it is, I'll post a link for the explanation. Perhaps, with the help of someone smarter than me, it's possible to create a logic that is deadlock free. Workaround 2: The second most common advice seems to be the use of WITH(NOLOCK) hint. The problem with this is that NOLOCK might miss or duplicate some rows. Duplication is not a problem, but missing rows is catastrophic! Another option is the WITH(READPAST) hint. On the face of it, this seems to be a perfect solution. I really don't care about rows that other clients are inserting/modifying, because each row belongs only to a specific client, so I may very well skip locked rows. But the MSDN documentaion makes me a bit worried - "When READPAST is specified, both row-level and page-level locks are skipped". As I said, row-level locks would not be a problem, but page-level locks may very well be, since a page might contain rows that belong to multiple clients (including the current one). While there are lots of blog posts specifically mentioning that NOLOCK might miss rows, there seems to be none about READPAST (never) missing rows. This makes me skeptical and nervous to implement it, since there is no easy way to test it (implementing would be a piece of cake, just pop WITH(READPAST) into both statements SELECT clause and job done). Can someone confirm whether the READPAST hint can miss rows? Workaround 3: The final option is to use ALLOW_SNAPSHOT_ISOLATION and READ_COMMITED_SNAPSHOT. This would seem to be the only option to work 100% - at least I can't find any information that would contradict with it. But it is a little bit trickier to setup (I don't care much about the performance hit), because I'm using LINQ. Off the top of my head I probably need to manually open a SQL connection and pass it to the LINQ2SQL DataContext, etc... I haven't looked into the specifics very deeply. Mostly I would prefer option 2 if somone could only reassure me that READPAST will never miss rows concerning the current client (as I said before, each client has and only ever deals with it's own set of rows). Otherwise I'll likely have to implement option 3, since option 1 is probably impossible... I'll post the table definitions for the three tables as well, just in case: CREATE TABLE [dbo].[UpdatedRows]( [Id] [uniqueidentifier] NOT NULL ROWGUIDCOL DEFAULT NEWSEQUENTIALID() PRIMARY KEY CLUSTERED, [RowId] [uniqueidentifier] NOT NULL, [UpdateDateTime] [datetime] NOT NULL, ) ON [PRIMARY] GO CREATE NONCLUSTERED INDEX IX_RowId ON dbo.UpdatedRows ([RowId] ASC) WITH (STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] GO CREATE TABLE [dbo].[ReceivedUpdatedRows]( [Id] [uniqueidentifier] NOT NULL ROWGUIDCOL DEFAULT NEWSEQUENTIALID() PRIMARY KEY NONCLUSTERED, [UpdatedRowId] [uniqueidentifier] NOT NULL REFERENCES [dbo].[UpdatedRows] ([Id]), [StudioId] [uniqueidentifier] NOT NULL REFERENCES, [ReceiveDateTime] [datetime] NOT NULL, ) ON [PRIMARY] GO CREATE CLUSTERED INDEX IX_Studios ON dbo.ReceivedUpdatedRows ([StudioId] ASC) WITH (STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] GO CREATE TABLE [dbo].[SynchronizingRows]( [StudioId] [uniqueidentifier] NOT NULL [UpdatedRowId] [uniqueidentifier] NOT NULL REFERENCES [dbo].[UpdatedRows] ([Id]) PRIMARY KEY CLUSTERED ([StudioId], [UpdatedRowId]) ) ON [PRIMARY] GO PS! Studio = Client. PS2! I just noticed that the index definitions have ALLOW_PAGE_LOCK=ON. If I would turn it off, would that make any difference to READPAST? Are there any negative downsides for turning it off?

    Read the article

  • MVVM and Animations in Silverlight

    - by Aligned
    I wanted to spin an icon to show progress to my user while some content was downloading. I'm using MVVM (aren't you) and made a satisfactory Storyboard to spin the icon. However, it took longer than expected to trigger that animation from my ViewModel's property.I used a combination of the GoToState action and the DataTrigger from the Microsoft.Expression.Interactions dll as described here.Then I had problems getting it to start until I found this approach that saved the day. The DataTrigger didn't bind right away because "it doesn’t change visual state on load is because the StateTarget property of the GotoStateAction is null at the time the DataTrigger fires.". Here's my XAML, hopefully you can fill in the rest.<Image x:Name="StatusIcon" AutomationProperties.AutomationId="StatusIcon" Width="16" Height="16" Stretch="Fill" Source="inProgress.png" ToolTipService.ToolTip="{Binding StatusTooltip}"> <i:Interaction.Triggers> <utilitiesBehaviors:DataTriggerWhichFiresOnLoad Value="True" Binding="{Binding IsDownloading, Mode=OneWay, TargetNullValue=True}"> <ei:GoToStateAction StateName="Downloading" /> </utilitiesBehaviors:DataTriggerWhichFiresOnLoad> <utilitiesBehaviors:DataTriggerWhichFiresOnLoad Value="False" Binding="{Binding IsDownloading, Mode=OneWay, TargetNullValue=True}"> <ei:GoToStateAction StateName="Complete"/> </utilitiesBehaviors:DataTriggerWhichFiresOnLoad> </i:Interaction.Triggers> <Image.Projection> <PlaneProjection/> </Image.Projection> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="VisualStateGroup"> <VisualStateGroup.Transitions> <VisualTransition GeneratedDuration="0" To="Downloading"> <VisualTransition.GeneratedEasingFunction> <QuadraticEase EasingMode="EaseInOut"/> </VisualTransition.GeneratedEasingFunction> <Storyboard RepeatBehavior="Forever"> <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Projection).(PlaneProjection.RotationZ)" Storyboard.TargetName="StatusIcon"> <EasingDoubleKeyFrame KeyTime="0:0:1.5" Value="-360"/> <EasingDoubleKeyFrame KeyTime="0:0:2" Value="-360"/> </DoubleAnimationUsingKeyFrames> </Storyboard> </VisualTransition> <VisualTransition From="Downloading" GeneratedDuration="0"/> </VisualStateGroup.Transitions> <VisualState x:Name="Downloading"/> <VisualState x:Name="Complete"/> </VisualStateGroup> </VisualStateManager.VisualStateGroups></Image>MVVMAnimations.zip

    Read the article

  • Database with 5 Tables with Insert and Select

    - by kirbby
    hi guys, my problem is that i have 5 tables and need inserts and selects. what i did is for every table a class and there i wrote the SQL Statements like this public class Contact private static String IDCont = "id_contact"; private static String NameCont = "name_contact"; private static String StreetCont = "street_contact"; private static String Street2Cont = "street2_contact"; private static String Street3Cont = "street3_contact"; private static String ZipCont = "zip_contact"; private static String CityCont = "city_contact"; private static String CountryCont = "country_contact"; private static String Iso2Cont = "iso2_contact"; private static String PhoneCont = "phone_contact"; private static String Phone2Cont = "phone2_contact"; private static String FaxCont = "fax_contact"; private static String MailCont = "mail_contact"; private static String Mail2Cont = "mail2_contact"; private static String InternetCont = "internet_contact"; private static String DrivemapCont = "drivemap_contact"; private static String PictureCont = "picture_contact"; private static String LatitudeCont = "latitude_contact"; private static String LongitudeCont = "longitude_contact"; public static final String TABLE_NAME = "contact"; public static final String SQL_CREATE = "CREATE TABLE IF NOT EXISTS " + TABLE_NAME + "(" + IDCont + "INTEGER not NULL," + NameCont + " TEXT not NULL," + StreetCont + " TEXT," + Street2Cont + " TEXT," + Street3Cont + " TEXT," + ZipCont + " TEXT," + CityCont + " TEXT," + CountryCont + " TEXT," + Iso2Cont + " TEXT," + PhoneCont + " TEXT," + Phone2Cont + " TEXT," + FaxCont + " TEXT," + MailCont + " TEXT," + Mail2Cont + " TEXT," + InternetCont + " TEXT," + //website of the contact DrivemapCont + " TEXT," + //a link to a drivemap to the contact PictureCont + " TEXT," + //a photo of the contact building (contact is not a person) LatitudeCont + " TEXT," + LongitudeCont + " TEXT," + "primary key(id_contact)" + "foreign key(iso2)"; and my insert looks like this public boolean SQL_INSERT_CONTACT(int IDContIns, String NameContIns, String StreetContIns, String Street2ContIns, String Street3ContIns, String ZipContIns, String CityContIns, String CountryContIns, String Iso2ContIns, String PhoneContIns, String Phone2ContIns, String FaxContIns, String MailContIns, String Mail2ContIns, String InternetContIns, String DrivemapContIns, String PictureContIns, String LatitudeContIns, String LongitudeContIns) { try{ db.execSQL("INSERT INTO " + "contact" + "(" + IDCont + ", " + NameCont + ", " + StreetCont + ", " + Street2Cont + ", " + Street3Cont + ", " + ZipCont + ", " + CityCont + ", " + CountryCont + ", " + Iso2Cont + ", " + PhoneCont + ", " + Phone2Cont + ", " + FaxCont + ", " + MailCont + ", " + Mail2Cont + ", " + InternetCont + ", " + DrivemapCont + ", " + PictureCont + ", " + LatitudeCont + ", " + LongitudeCont + ") " + "VALUES (" + IDContIns + ", " + NameContIns +", " + StreetContIns + ", " + Street2ContIns + ", " + Street3ContIns + ", " + ZipContIns + ", " + CityContIns + ", " + CountryContIns + ", " + Iso2ContIns + ", " + PhoneContIns + ", " + Phone2ContIns + ", " + FaxContIns + ", " + MailContIns + ", " + Mail2ContIns + ", " + InternetContIns + ", " + DrivemapContIns + ", " + PictureContIns + ", " + LatitudeContIns + ", " + LongitudeContIns +")"); return true; } catch (SQLException e) { return false; } } i have a DBAdapter class there i created the database public class DBAdapter { public static final String DB_NAME = "mol.db"; private static final int DB_VERSION = 1; private static final String TAG = "DBAdapter"; //to log private final Context context; private SQLiteDatabase db; public DBAdapter(Context context) { this.context = context; OpenHelper openHelper = new OpenHelper(this.context); this.db = openHelper.getWritableDatabase(); } public static class OpenHelper extends SQLiteOpenHelper { public OpenHelper(Context context) { super(context, DB_NAME, null, DB_VERSION); } @Override public void onCreate(SQLiteDatabase db) { // TODO Auto-generated method stub db.execSQL(Contact.SQL_CREATE); db.execSQL(Country.SQL_CREATE); db.execSQL(Picture.SQL_CREATE); db.execSQL(Product.SQL_CREATE); db.execSQL(Project.SQL_CREATE); } @Override public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) { // TODO Auto-generated method stub Log.w(TAG, "Upgrading database from version " + oldVersion + " to " + newVersion + ", which will destroy all old data"); db.execSQL(Contact.SQL_DROP); db.execSQL(Country.SQL_DROP); db.execSQL(Picture.SQL_DROP); db.execSQL(Product.SQL_DROP); db.execSQL(Project.SQL_DROP); onCreate(db); } i found so many different things and tried them but i didn't get anything to work... i need to know how can i access the database in my activity and how i can get the insert to work and is there sth wrong in my code? thanks for your help thats how i tried to get it into my activity public class MainTabActivity extends TabActivity { private Context context; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.maintabactivity); TabHost mTabHost = getTabHost(); Intent intent1 = new Intent().setClass(this,MapOfLight.class); //Intent intent2 = new Intent().setClass(this,Test.class); //Testactivity //Intent intent2 = new Intent().setClass(this,DetailView.class); //DetailView Intent intent2 = new Intent().setClass(this,ObjectList.class); //ObjectList //Intent intent2 = new Intent().setClass(this,Gallery.class); //Gallery Intent intent3 = new Intent().setClass(this,ContactDetail.class); mTabHost.addTab(mTabHost.newTabSpec("tab_mol").setIndicator(this.getText(R.string.mol), getResources().getDrawable(R.drawable.ic_tab_mol)).setContent(intent1)); mTabHost.addTab(mTabHost.newTabSpec("tab_highlights").setIndicator(this.getText(R.string.highlights),getResources().getDrawable(R.drawable.ic_tab_highlights)).setContent(intent2)); mTabHost.addTab(mTabHost.newTabSpec("tab_contacts").setIndicator(this.getText(R.string.contact),getResources().getDrawable(R.drawable.ic_tab_contact)).setContent(intent3)); mTabHost.setCurrentTab(1); SQLiteDatabase db; DBAdapter dh = null; OpenHelper openHelper = new OpenHelper(this.context); dh = new DBAdapter(this); db = openHelper.getWritableDatabase(); dh.SQL_INSERT_COUNTRY("AT", "Austria", "AUT"); } } i tried it with my country table because it has only 3 columns public class Country { private static String Iso2Count = "iso2_country"; private static String NameCount = "name_country"; private static String FlagCount = "flag_image_url_country"; public static final String TABLE_NAME = "country"; public static final String SQL_CREATE = "CREATE TABLE IF NOT EXISTS " + TABLE_NAME + "(" + Iso2Count + " TEXT not NULL," + NameCount + " TEXT not NULL," + FlagCount + " TEXT not NULL," + "primary key(iso2_country)"; public boolean SQL_INSERT_COUNTRY(String Iso2CountIns, String NameCountIns, String FlagCountIns) { try{ db.execSQL("INSERT INTO " + "country" + "(" + Iso2Count + ", " + NameCount + ", " + FlagCount + ") " + "VALUES ( " + Iso2CountIns + ", " + NameCountIns +", " + FlagCountIns + " )"); return true; } catch (SQLException e) { return false; } } another question is it better to put the insert and select from each table into a separate class, so i have 1 class for each table or put them all into the DBAdapter class?

    Read the article

  • Symfony2 same form, different entities NOT related

    - by user1381537
    I'm trying to write one form for submitting against MySQL DB, but I can't get it working, I've tried a lot of things (separate forms, create an ->add('foo', new foo()) to a field, and trying to parse plain SQL with a normal HTML form is my only solution, which is obviously not the best. This is my DB structure: As you can see I need to insert the comments textarea to ticketcomments among the user who wrote it, etc. On crmentity the description field. Then on ticketcf the fields that I need to submit from form, are this (because you wont know if I don't tell you because of the field names): tcf.cf594 AS Type, tcf.cf675 AS Suscription, tcf.cf770 AS ID_PRODUCT, tcf.cf746 AS NotificationDate, tcf.cf747 AS ResponseDate, tcf.cf748 AS ResolutionDate, And, of course, every table needs to have the same ticketid id for the submitted form, so we can retrieve it with one simple query. It will be easy to do with plain SQL instead of using DQL and Symfony2 forms, but is not a good way to do it. Also, here's my "Ticket list" query, if you need it to have it more clear... SELECT t.ticketNo AS Ticket, t.title AS Asunto, t.status AS Estado, t.updateLog AS LOG, t.hours AS Horas, t.solution AS Solucion, t.priority AS Prioridad, tcf.cf594 AS Tipo, tcf.cf675 AS Suscripcion, tcf.cf770 AS IDPROD, tcf.cf746 AS F_Noti, tcf.cf747 AS F_Resp, tcf.cf748 AS F_Reso, CONCAT (cd.firstname, cd.lastname) AS Contacto, crm.description AS Descripcion, crm.crmid AS id FROM WbsGoclientsBundle:VtigerTroubletickets t INNER JOIN WbsGoclientsBundle:VtigerTicketcf tcf WITH t.ticketid = tcf.ticketid INNER JOIN WbsGoclientsBundle:VtigerContactdetails cd WITH t.parentId = cd.contactid INNER JOIN WbsGoclientsBundle:VtigerCrmentity crm WITH t.ticketid = crm.crmid WHERE t.parentId IN ( SELECT cd1.contactid FROM WbsGoclientsBundle:VtigerContactdetails cd1 WHERE cd1.accountid = ( SELECT cd2.accountid FROM WbsGoclientsBundle:VtigerContactdetails cd2 WHERE cd2.contactid = :contactid)) AND t.status <> \'Closed\' And also "Ticket details" query (which is not in DQL format yet, only SQL) is so simple, it only retrieve the comments field and createdtime from ticketcomments appended to this query so we have all the fields... Thank you. This is a test form, using troubletickets and ticketcomments, it's returning errores because I can't set a comments field because troubletickets doesn't has it, but I need that field to be submitted to ticketcomments ... VtigerTicketcommentsType <?php namespace WbsGo\clientsBundle\Form\Type; use Symfony\Component\Form\AbstractType, Symfony\Component\Form\FormBuilderInterface; use Symfony\Component\OptionsResolver\OptionsResolverInterface; class VtigerTicketcommentsType extends AbstractType { public function buildForm(FormBuilderInterface $builder, array $options) { $builder ->add('ticketid') ->add('comments') ->add('ownerid') ->add('ownertype') ->add('createdtype') ; } public function setDefaultOptions(OptionsResolverInterface $resolver) { $resolver->setDefaults(array( 'data_class' => 'WbsGo\clientsBundle\Entity\VtigerTicketcomments' )); } public function getName() { return 'comments'; } } OpenTicketType.php <?php namespace WbsGo\clientsBundle\Form; use Symfony\Component\Form\AbstractType, Symfony\Component\Form\FormBuilderInterface ; use WbsGo\clientsBundle\Form\Type\VtigerTicketcommentsType; use Symfony\Component\OptionsResolver\OptionsResolverInterface; class OpenTicketType extends AbstractType { public function buildForm(FormBuilderInterface $builder, array $options) { $builder ->add('title') ->add('priority') ->add('solution') ->add('comments', 'collection', array( 'type' => new VtigerTicketcommentsType() )) ; } public function setDefaultOptions(OptionsResolverInterface $resolver) { $resolver->setDefaults(array( 'data_class' => 'WbsGo\clientsBundle\Entity\VtigerTroubletickets' )); } public function getName() { return 'ticket'; } } TicketController.php <?php namespace WbsGo\clientsBundle\Controller; use Symfony\Bundle\FrameworkBundle\Controller\Controller; use WbsGo\clientsBundle\Entity\VtigerTroubletickets; use WbsGo\clientsBundle\Entity\VtigerTicketcomments; use WbsGo\clientsBundle\Form\OpenTicketType; use Symfony\Component\HttpFoundation\Request; class TicketController extends Controller { public function indexAction() { $em = $this->getDoctrine()->getManager(); $tickets = $em ->getRepository('WbsGoclientsBundle:VtigerTroubletickets') ->findAllOpenByCustomerId($this->getUser()->getId()); $userdata = $this->getDoctrine()->getManager() ->getRepository('WbsGoclientsBundle:VtigerContactdetails') ->findContact($this->getUser()->getId()); return $this ->render('WbsGoclientsBundle:Ticket:index.html.twig', array('tickets' => $tickets, 'userdata' => $userdata)); } public function addAction() { $assets = $this->getDoctrine()->getManager() ->getRepository('WbsGoclientsBundle:VtigerAssets') ->findAssetByAccountId($this->getUser()->getId()); $assetlist = array(); foreach ($assets as $key => $v) { $assetlist[$key] = $key; } $form = $this->createForm(new OpenTicketType(), new VtigerTroubletickets()); return $this ->render('WbsGoclientsBundle:Ticket:add.html.twig', array('form' => $form->createView(), 'assets' => $assets,)); } } This is the error Symfony2 is returning Neither the property "comments" nor one of the methods "getComments()", "isComments()", "hasComments()", "_get()" or "_call()" exist and have public access in class "WbsGo\clientsBundle\Entity\VtigerTroubletickets". EDIT 2 This code is actually rendering my forms, but I need help in order to submit each XXXType form to its corresponding table. public function buildForm(FormBuilderInterface $builder, array $options) { $builder ->add('descripcion') ->add('prioridad') ->add('solucion') ->add('comment', new VtigerTicketcommentsType() ) ->add('contacto') ->add('suscripcion') ->add('producto', 'entity', array( 'class' => 'WbsGo\clientsBundle\Entity\VtigerAssets', 'property' => 'assetname', 'empty_value' => '--SELECT--', 'query_builder' => function(\WbsGo\clientsBundle\Entity\VtigerAssetsRepository $repository) { //return $repository->findAssetByAccountId($this->customerId); return $repository->createQueryBuilder('a') ->select('a') ->where('a.account = (SELECT cd.accountid FROM WbsGoclientsBundle:VtigerContactdetails cd WHERE cd.contactid = ?1)') ->setParameter(1, $this->customerId); } ) ) ->add('hardware') ->add('backup') ->add('web') ->add('restore') ->add('customerId') ; } I also removed ->add('ticketid') from VtigerTicketcommentsType.php because it has relationship and is not needed. it's auto_incremental and must be generated once everything is submitted.

    Read the article

  • problem in displays data in one page

    - by user318068
    hi ,,,,, I have a problem in the following code ... The following code works as follows displays the invites for each member so that if he had five invite from supposed to be displayed all on one page But before you code that does not function Proper image is the only display one invite on the page and until the approval or rejection of the invitation displays the invite the other .... But this is not my want to offer all on one page I wish I could solve the problem and I can view all calls in one page I think that the problem is in the order code I think that the problem is in the order code my code : <?php session_start(); if (!isset($_SESSION['user_id'])) { header("Location: login.php"); } $id=$_SESSION['user_id']; ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Untitled Document</title> </head> <body> <center> <?php include("connect.php"); $sql =mysql_query("select * from ninvite where recieverMemberID ='$id' and viwed= '0'"); $num =mysql_num_rows($sql); echo $num ; if ($num>0) { while($row=mysql_fetch_array($sql)) { $sender=$row['SenderMemberID']; $room=$row['RoomID']; $sql =mysql_query("select MemberName from members where MemberID ='$sender' "); $sql1 =mysql_query("select RoomName from rooms where RoomID ='$room' "); while($row=mysql_fetch_array($sql)) {$mem =$row['MemberName']; } while($rows=mysql_fetch_array($sql1)) { $Ro =$rows['RoomName']; ?> <form action="join.php" method="post"> <label> </label> <br/> <label> <?php echo " you have invite from $mem to join $Ro"; ?> </label> <br/><br/> <label>accept</label> <input name="radio1" type="radio" value="accpet" /> <label>reject</label> <input name="radio1" type="radio" value="Reject" /><br/> <input type="submit" name="submit" value="done" /> </form> <?php } } } ?> </center> </body> </html> thanks alot. my SQl -- phpMyAdmin SQL Dump -- version 3.2.4 -- http://www.phpmyadmin.net -- Host: localhost -- Generation Time: May 07, 2010 at 12:50 ? -- Server version: 5.1.41 -- PHP Version: 5.3.1 SET SQL_MODE="NO_AUTO_VALUE_ON_ZERO"; /*!40101 SET @OLD_CHARACTER_SET_CLIENT=@@CHARACTER_SET_CLIENT /; /!40101 SET @OLD_CHARACTER_SET_RESULTS=@@CHARACTER_SET_RESULTS /; /!40101 SET @OLD_COLLATION_CONNECTION=@@COLLATION_CONNECTION /; /!40101 SET NAMES utf8 */; -- -- Database: tr -- -- Table structure for table joinroom CREATE TABLE IF NOT EXISTS joinroom ( MemberID int(10) NOT NULL, RoomID int(10) NOT NULL, PRIMARY KEY (MemberID,RoomID) ) ENGINE=MyISAM DEFAULT CHARSET=latin1; -- -- Dumping data for table joinroom INSERT INTO joinroom (MemberID, RoomID) VALUES (28, 1); -- -- Table structure for table members CREATE TABLE IF NOT EXISTS members ( MemberID int(10) unsigned NOT NULL AUTO_INCREMENT, MemberName varchar(20) CHARACTER SET utf8 COLLATE utf8_bin NOT NULL, MemberPass varchar(10) CHARACTER SET utf8 COLLATE utf8_bin NOT NULL, MemberEmail varchar(30) CHARACTER SET utf8 COLLATE utf8_bin NOT NULL, MemberLocation text CHARACTER SET utf8 COLLATE utf8_bin NOT NULL, MemberImg text CHARACTER SET utf8 COLLATE utf8_bin NOT NULL, PRIMARY KEY (MemberID) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=34 ; -- -- Dumping data for table members INSERT INTO members (MemberID, MemberName, MemberPass, MemberEmail, MemberLocation, MemberImg) VALUES (28, 'marwa', '1234', '[email protected]', 'mmmmmm', 'dddddddddd'), (29, 'nora', '1234', '[email protected]', 'fffffffffffgg', 'gggggggggggggg'), (30, 'soso', '1234', '[email protected]', 'ffffffff', 'kkkkkkkkkkkkkkkkkk'), (31, 'gege', '1234', '[email protected]', 'kkkkkkkkkkkkkkkk', 'uuuuuuuuuuuuuuuuu'), (32, 'nono', '1234', '[email protected]', 'ggggggggggggaaaaa', 'aaaaaaaaaaaaaaa'), (33, 'nda', '1234', '[email protected]', 'kkkkkkkkkkkkkkkk', 'ooooooooooooooo'); -- -- Table structure for table ninvite CREATE TABLE IF NOT EXISTS ninvite ( SenderMemberID int(11) NOT NULL AUTO_INCREMENT, recieverMemberID varchar(30) NOT NULL, RoomID int(11) NOT NULL, viwed int(11) NOT NULL, PRIMARY KEY (SenderMemberID,recieverMemberID,RoomID) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=33 ; -- -- Dumping data for table ninvite INSERT INTO ninvite (SenderMemberID, recieverMemberID, RoomID, viwed) VALUES (28, '33', 1, 0), (28, '32', 1, 0), (28, '31', 1, 0); /*!40101 SET CHARACTER_SET_CLIENT=@OLD_CHARACTER_SET_CLIENT /; /!40101 SET CHARACTER_SET_RESULTS=@OLD_CHARACTER_SET_RESULTS /; /!40101 SET COLLATION_CONNECTION=@OLD_COLLATION_CONNECTION */;

    Read the article

  • Strangling the life out of Software Testing

    - by MarkPearl
    I recently did a course at the local university on Software Engineering. At the beginning of the course I looked over the outline of the subject and there seemed to be some really good content. It covered traditional & agile project methodologies, some general communication and modelling chapters and finished off with testing. I was particularly excited to see the section on testing as this was something I learnt on my own and see great value in. The course has now just ended and I am very disappointed. I now know one of the reasons why so few people i.e. in my region do Test Driven Development, or perform even basic testing methodologies. The topic was to academic! Yes, you might be able to list 4 different types of black box test approaches vs. white box test approaches and describe the characteristics of Smoke Tests, but never during course did we see an example of an actual test or how it might be implemented! In fact, if I did not have personal experience of applying testing in actual projects, I wouldn’t even know what a unit test looked like. Now, what worries me is the following… It took us 6 months to cover the course material, other students more than likely came out of that course with little appreciation of the subject – in fact they now have a very complex view of what a test is – so complex that I think most of them will never attempt it again on their own. Secondly, imagine studying to be a dentist without ever actually seeing a tooth? Yes, you might be able to describe a tooth, and know what it is made out of – but nobody would want a dentist who has never seen a tooth to operate on them. Yet somehow we expect people studying software engineering to do the same? This is not right. Now, before I finish my rant let me say that I know this is not the same everywhere in the world, and that there needs to be a balance on practical implementation and academic understanding – I am just disappointed that this does not seem to be happening at the institution that I am currently studying at ;-( Please, if you happen to be a lecturer or teacher reading this post – a combination of theory and practical's goes a long way. We need to up the quality of software being produced and that starts at learner level!

    Read the article

  • How to temporarily save the result of the query, to use in another?

    - by Truth
    I have this problem I think you may help me with. P.S. I'm not sure how to call this, so if anyone finds a more appropriate title, please do edit. Background I'm making this application for searching bus transit lines. Bus lines are a 3 digit number, and is unique and will never change. The requirement is to be able to search for lines from stop A to stop B. The user interface is already successful in hinting the user to only use valid stop names. The requirement is to be able to display if a route has a direct line, and if not, display a 2-line and even 3-line combination. Example: I need to get from point A to point D. The program should show: If there's a direct line A-D. If not, display alternative, 2 line combos, such as A-C, C-D. If there aren't any 2-line combos, search for 3-line combos: A-B, B-C, C-D. Of course, the app should display bus line numbers, as well as when to switch buses. What I have: My database is structured as follows (simplified, actual database includes locations and times and whatnot): +-----------+ | bus_stops | +----+------+ | id | name | +----+------+ +-------------------------------+ | lines_stops_relationship | +-------------+---------+-------+ | bus_line | stop_id | order | +-------------+---------+-------+ Where lines_stops_relationship describe a many-to-many relationship between the bus lines and the stops. Order, signifies the order in which stops appear in a single line. Not all lines go back and forth, and order has meaning (point A with order 2 comes after point B with order 1). The Problem We find out if a line can pass through the route easily enough. Just search for a single line which passes through both points in the correct order. How can I find if there's a 2/3 line combo? I was thinking to search for a line which matches the source stop, and one for the destination stop, and see if I can get a common stop between them, where the user can switch buses. How do I remember that stop? 3 line combo is even trickier, I find a line for the source, and a line for the destination, and then what? Search for a line which has 2 stops I guess, but again, How do I remember the stops? tl;dr How do I remember results from a query to be able to use it again? I'm hoping to achieve this in a single query (for each, a query for 1-line routes, a query for 2, and a query for 3-line combos). Note: I don't mind if someone suggests a completely different approach than what I have, I'm open to any solutions. Will award any assistance with a cookie and an upvote. Thanks in advance!

    Read the article

  • Are we queueing and serializing properly?

    - by insta
    We process messages through a variety of services (one message will touch probably 9 services before it's done, each doing a specific IO-related function). Right now we have a combination of the worst-case (XML data contract serialization) and best-case (in-memory MSMQ) for performance. The nature of the message means that our serialized data ends up about 12-15 kilobytes, and we process about 4 million messages per week. Persistent messages in MSMQ were too slow for us, and as the data grows we are feeling the pressure from MSMQ's memory-mapped files. The server is at 16GB of memory usage and growing, just for queueing. Performance also suffers when the memory usage is high, as the machine starts swapping. We're already doing the MSMQ self-cleanup behavior. I feel like there's a part we're doing wrong here. I tried using RavenDB to persist the messages and just queueing an identifier, but the performance there was very slow (1000 messages per minute, at best). I'm not sure if that's a result of using the development version or what, but we definitely need a higher throughput[1]. The concept worked very well in theory but performance was not up to the task. The usage pattern has one service acting as a router, which does all reads. The other services will attach information based on their 3rd party hook, and forward back to the router. Most objects are touched 9-12 times, although about 10% are forced to loop around in this system for awhile until the 3rd parties respond appropriately. The services right now account for this and have appropriate sleeping behaviors, as we utilize the priority field of the message for this reason. So, my question, is what is an ideal stack for message passing between discrete-but-LAN'ed machines in a C#/Windows environment? I would normally start with BinaryFormatter instead of XML serialization, but that's a rabbit hole if a better way is to offload serialization to a document store. Hence, my question. [1]: The nature of our business means the sooner we process messages, the more money we make. We've empirically proven that processing a message later in the week means we are less likely to make that money. While performance of "1000 per minute" sounds plenty fast, we really need that number upwards of 10k/minute. Just because I'm giving numbers in messages per week doesn't mean we have a whole week to process those messages.

    Read the article

  • How should I refactor switch statements like this (Switching on type) to be more OO?

    - by Taytay
    I'm seeing some code like this in our code base, and want to refactor it: (Typescript psuedocode follows): class EntityManager{ private findEntityForServerObject(entityType:string, serverObject:any):IEntity { var existingEntity:IEntity = null; switch(entityType) { case Types.UserSetting: existingEntity = this.getUserSettingByUserIdAndSettingName(serverObject.user_id, serverObject.setting_name); break; case Types.Bar: existingEntity = this.getBarByUserIdAndId(serverObject.user_id, serverObject.id); break; //Lots more case statements here... } return existingEntity; } } The downsides of switching on type are self-explanatory. Normally, when switching behavior based on type, I try to push the behavior into subclasses so that I can reduce this to a single method call, and let polymorphism take care of the rest. However, the following two things are giving me pause: 1) I don't want to couple the serverObject with the class that is storing all of these objects. It doesn't know where to look for entities of a certain type. And unfortunately, the identity of a type of ServerObject varies with the type of ServerObject. (So sometimes it's just an ID, other times it's a combination of an id and a uniquely identifying string, etc). And this behavior doesn't belong down there on those subclasses. It is the responsibility of the EntityManager and its delegates. 2) In this case, I can't modify the ServerObject classes since they're plain old data objects. It should be mentioned that I've got other instances of the above method that take a parameter like "IEntity" and proceed to do almost the same thing (but slightly modify the name of the methods they're calling to get the identity of the entity). So, we might have: case Types.Bar: existingEntity = this.getBarByUserIdAndId(entity.getUserId(), entity.getId()); break; So in that case, I can change the entity interface and subclasses, but this isn't behavior that belongs in that class. So, I think that points me to some sort of map. So eventually I will call: private findEntityForServerObject(entityType:string, serverObject:any):IEntity { return aMapOfSomeSort[entityType].findByServerObject(serverObject); } private findEntityForEntity(someEntity:IEntity):IEntity { return aMapOfSomeSort[someEntity.entityType].findByEntity(someEntity); } Which means I need to register some sort of strategy classes/functions at runtime with this map. And again, I darn well better remember to register one for each my my types, or I'll get a runtime exception. Is there a better way to refactor this? I feel like I'm missing something really obvious here.

    Read the article

< Previous Page | 401 402 403 404 405 406 407 408 409 410 411 412  | Next Page >