Search Results

Search found 10466 results on 419 pages for 'restart explorer'.

Page 405/419 | < Previous Page | 401 402 403 404 405 406 407 408 409 410 411 412  | Next Page >

  • Cross-platform distributed fault-tolerant (disconnected operation/local cache) filesystem

    - by Adrian Frühwirth
    We are facing a design "challenge" where we are required to set up a storage solution with the following properties: What we need HA a scalable storage backend offline/disconnected operation on the client to account for network outages cross-platform access client-side access from certainly Windows (probably XP upwards), possibly Linux backend integrates with AD/LDAP (permission management (user/group management, ...)) should work reasonably well over slow WAN-links Another problem is that we don't really know all possible use cases here, if people need to be able to have concurrent access to shared files or if they will only be accessing their own files, so a possible solution needs to account for concurrent access and how conflict management would look in this case from a user's point of view. This two years old blog posts sums up the impression that I have been getting during the last couple of days of research, that there are lots of current übercool projects implementing (non-Windows) clustered petabyte-capable blob-storage solutions but that there is none that supports disconnected operation nicely and natively, but I am hoping that we have missed an obvious solution. What we have tried OpenAFS We figured that we want a distributed network filesystem with a local cache and tested OpenAFS (which, as the only currently "stable" DFS supporting disconnected operation, seemed the way to go) for a week but there are several problems with it: it's a real pain to set up there are no official RHEL/CentOS packages the package of the current stable version 1.6.5.1 from elrepo randomly kernel panics on fresh installs, this is an absolute no-go Windows support (including the required Kerberos packages) is mystical. The current client for the 1.6 branch does not run on Windows 8, the current client for the 1.7 does but it just randomly crashes. After that experience we didn't even bother testing on XP and Windows 7. Suffice to say, we couldn't get it working and the whole setup has been so unstable and complicated to setup that it's just not an option for production. Samba + Unison Since OpenAFS was a complete disaster and no other DFS seems to support disconnected operation we went for a simpler idea that would sync files against a Samba server using Unison. This has the following advantages: Samba integrates with ADs; it's a pain but can be done. Samba solves the problem of remotely accessing the storage from Windows but introduces another SPOF and does not address the actual storage problem. We could probably stick any clustered FS underneath Samba, but that means we need a HA Samba setup on top of that to maintain HA which probably adds a lot of additional complexity. I vaguely remember trying to implement redundancy with Samba before and I could not silently failover between servers. Even when online, you are working with local files which will result in more conflicts than would be necessary if a local cache were only touched when disconnected It's not automatic. We cannot expect users to manually sync their files using the (functional, but not-so-pretty) GTK GUI on a regular basis. I attempted to semi-automate the process using the Windows task scheduler, but you cannot really do it in a satisfactory way. On top of that, the way Unison works makes syncing against Samba a costly operation, so I am afraid that it just doesn't scale very well or even at all. Samba + "Offline Files" After that we became a little desparate and gave Windows "offline files" a chance. We figured that having something that is inbuilt into the OS would reduce administrative efforts, helps blaming someone else when it's not working properly and should just work since people have been using this for years. Right? Wrong. We really wanted it to work, but it just doesn't. 30 minutes of copying files around and unplugging network cables/disabling network interfaces left us with (silent! there is only a tiny notification in Windows explorer in the statusbar, which doesn't even open Sync Center if you click on it!) undeletable files on the server (!) and conflicts that should not even be conflicts. In the end, we had one successful sync of a tiny text file, everything else just exploded horribly. Beyond that, there are other problems: Microsoft admits that "offline files" in Windows XP cannot cope with "large files" and therefore does not cache/sync them at all which would mean those files become unavailable if the connection drop In Windows 7 the feature is only available in the Professional/Ultimate/Enterprise editions. Summary Unless there is another fault-tolerant DFS that supports Windows natively I assume that stacking a HA Samba cluster on top of something like GlusterFS/Lustre/whatnot is the only option, but I hope that I am wrong here. How do other companies allow fault-tolerant network access to redundant storage in a heterogeneous environment with Windows?

    Read the article

  • LibreOffice UNO Java API: how to open a document, execute a macro and close it?

    - by MarcoS
    I'm working on LibreOffice server-side: on the server I run soffice --accept=... Then I use Java LibreOffice client API's to apply a macro on a document (calc or writer). The java execution does not give any error, but I do not get the job done (macro code is executed, but it's effects are not in the output file). More, after macro script is invoked, the Basic debugger window appears, apparently stopped on the first line of my macro; F5 does not restart it... This is the relevant code I'm using: try { XComponentContext xLocalContext = Bootstrap.createInitialComponentContext(null); System.out.println("xLocalContext"); XMultiComponentFactory xLocalServiceManager = xLocalContext.getServiceManager(); System.out.println("xLocalServiceManager"); Object urlResolver = xLocalServiceManager.createInstanceWithContext( "com.sun.star.bridge.UnoUrlResolver", xLocalContext); System.out.println("urlResolver"); XUnoUrlResolver xUrlResolver = (XUnoUrlResolver) UnoRuntime.queryInterface(XUnoUrlResolver.class, urlResolver); System.out.println("xUrlResolve"); try { String uno = "uno:" + unoMode + ",host=" + unoHost + ",port=" + unoPort + ";" + unoProtocol + ";" + unoObjectName; Object rInitialObject = xUrlResolver.resolve(uno); System.out.println("rInitialObject"); if (null != rInitialObject) { XMultiComponentFactory xOfficeFactory = (XMultiComponentFactory) UnoRuntime.queryInterface( XMultiComponentFactory.class, rInitialObject); System.out.println("xOfficeFactory"); Object desktop = xOfficeFactory.createInstanceWithContext("com.sun.star.frame.Desktop", xLocalContext); System.out.println("desktop"); XComponentLoader xComponentLoader = (XComponentLoader)UnoRuntime.queryInterface( XComponentLoader.class, desktop); System.out.println("xComponentLoader"); PropertyValue[] loadProps = new PropertyValue[3]; loadProps[0] = new PropertyValue(); loadProps[0].Name = "Hidden"; loadProps[0].Value = Boolean.TRUE; loadProps[1] = new PropertyValue(); loadProps[1].Name = "ReadOnly"; loadProps[1].Value = Boolean.FALSE; loadProps[2] = new PropertyValue(); loadProps[2].Name = "MacroExecutionMode"; loadProps[2].Value = new Short(com.sun.star.document.MacroExecMode.ALWAYS_EXECUTE_NO_WARN); try { XComponent xComponent = xComponentLoader.loadComponentFromURL("file:///" + inputFile, "_blank", 0, loadProps); System.out.println("xComponent from " + inputFile); String macroName = "Standard.Module1.MYMACRONAME?language=Basic&location=application"; Object[] aParams = null; XScriptProviderSupplier xScriptPS = (XScriptProviderSupplier) UnoRuntime.queryInterface(XScriptProviderSupplier.class, xComponent); XScriptProvider xScriptProvider = xScriptPS.getScriptProvider(); XScript xScript = xScriptProvider.getScript("vnd.sun.star.script:"+macroName); short[][] aOutParamIndex = new short[1][1]; Object[][] aOutParam = new Object[1][1]; @SuppressWarnings("unused") Object result = xScript.invoke(aParams, aOutParamIndex, aOutParam); System.out.println("xScript invoke macro" + macroName); XStorable xStore = (XStorable)UnoRuntime.queryInterface(XStorable.class, xComponent); System.out.println("xStore"); if (outputFileType.equalsIgnoreCase("pdf")) { System.out.println("writer_pdf_Export"); loadProps[0].Name = "FilterName"; loadProps[0].Value = "writer_pdf_Export"; } xStore.storeToURL("file:///" + outputFile, loadProps); System.out.println("storeToURL to file " + outputFile); xComponent.dispose(); xComponentLoader = null; rInitialObject = null; System.out.println("done."); System.exit(0); } catch(IllegalArgumentException e) { System.err.println("Error: Can't load component from url " + inputFile); } } else { System.err.println("Error: Unknown initial object name at server side"); } } catch(NoConnectException e) { System.err.println("Error: Server Connection refused: check server is listening..."); } } catch(java.lang.Exception e) { System.err.println("Error: Java exception:"); e.printStackTrace(); }

    Read the article

  • Windows NT Service shutdown issues

    - by Jeremiah Gowdy
    I have developed middleware that provides RPC functionality to multiple client applications on multiple platforms within our organization. The middleware is written in C# and runs as a Windows NT Service. It handles things like file access to network shares, database access, etc. The middleware is hosted on two high end systems running Windows Server 2008 R2. When one of our server administrators goes to reboot the machine, primarily to do Windows Updates, there are serious problems with how the system behaves in regards to my NT Service. My service is designed to immediately stop listening for new connections, immediately start refusing new requests on existing connections, and otherwise shut down as rapidly as possible in the case of an OnStop or OnShutdown request from the SCM. Still, to maintain system integrity, operations that are currently in progress are allowed to continue for a reasonable time. Usually the server shuts down inside of 30 seconds (when the service is manually stopped for example). However, when the system is instructed to restart, my service immediately loses access to network drives and UNC paths, causing data integrity problems for any open files and partial writes to those locations. My service does list Workstation (and thus SMB Redirector) as a dependency, so I would think that my service would need to be stopped prior to Workstation/Redirector being stopped if Windows were honoring those dependencies. Basically, my application is forced to crash and burn, failing remote procedure calls and eventually being forced to terminate by the operating system after a timeout period has elapsed (seems to be on the order of 20-30 seconds). Unlike a Windows application, my Windows NT Service doesn't seem to have any power to stop a system shutdown in progress, delay the system shutdown, or even just the opportunity to save out any pending network share disk writes before being forcibly disconnected and shutdown. How is an NT Service developer supposed to have any kind of application integrity in this environment? Why is it that Forms Applications get all of the opportunity to finish their business prior to shutdown, while services seem to get no such benefits? I have tried: Calling SetProcessShutdownParameters via p/invoke to try to notify my application of the shutdown sooner to avoid Redirector shutting down before I do. Calling ServiceBase.RequestAdditionalTime with a value less than or equal to the two minute limit. Tweaking the WaitToKillServiceTimeout Everything I can think of to make my service shutdown faster. But in the end, I still get ~30 seconds of problematic time in which my service doesn't even seem to have been notified of an OnShutdown event yet, but requests are failing due to redirector no longer servicing my network share requests. How is this issue meant to be resolved? What can I do to delay or stop the shutdown, or at least be allowed to shut down my active tasks without Redirector services disappearing out from under me? I can understand what Microsoft is trying to do to prevent services from dragging their feet and showing shutdowns, but that seems like a great goal for Windows client operating systems, not for servers. I don't want my servers to shutdown fast, I want operational integrity and graceful shutdowns. Thanks in advance for any help you can provide. PS in regards to writing my own middleware, this is for a telephony application with sub-second "soft-realtime" response time requirements. It does make sense, and it's not a point I'm looking to debate. :)

    Read the article

  • Slow Jquery Animation

    - by Pyronaut
    I have this webpage : http://miloarc.pyrogenicmedia.com/ Which atm is nothing special. It has a few effects but none that break the bank. If you mouse over a tile, it should change it's opacity to give it a fade effect. This is done through the Jquery Animation, not through CSS (I do this so it can fade, instead of being a straight change). Everything looks nice when the page loads, and the fades look perfect. Infact if you drag your mouse all over the place, if gives you a "trail" almost like a snake. Anyway, My next problem is that you will see there is a box in the top left, which is going to tell you information about the tile you are hovering over. This seems to work fine. When you mouse over that information box, it switches it's position (So that you can reach the tiles that were previously hidden underneath it). From my understanding, this is all working fine, and to the letter. However, After one move of the info box (One hover). Viewing the page in Firefox turns slugish. As in, after a successful move of the info box, the fade effects become very stuttered, and it doesn't pick up events as fast meaning you can't draw a "trail" on the screen. Chrome doesn't have this issue. It seems to work fine no matter what. Safari also seems ok. Although I do notice if I move my mouse really fast, it does jump a bit but not as much as firefox. Internet explorer doesn't work at all. Seems to crash the browser... And there is an error with the rounded corner plugin im using (Not sure why...). All in all, I think whatever I'm doing inside my code must be heavily sluggish. But I don't know where it is happening. Here is the full code, but I would advise go to the link to view everything. <script type="text/javascript"> $(document).ready(function() { var WindowWidth = $(window).width(); var WindowMod = WindowWidth % 20; var WindowWidth = WindowWidth - WindowMod; var BoxDimension = WindowWidth / 20; var BoxDimensionFixed = BoxDimension - 12; var dimensions = BoxDimensionFixed + 'px'; $('.gamebutton').each(function(i) { $(this).css('width', dimensions); $(this).css('height', dimensions); }); var OuterDivHeight = BoxDimension * 10; var TopMargin = ($(window).height() - OuterDivHeight) / 2; var OuterDivWidth = BoxDimension * 20; var LeftMargin = ($(window).width() - OuterDivWidth) / 2; $('#gamePort').css('margin-top', TopMargin).css('margin-left', LeftMargin).css('margin-right', LeftMargin); $('.gamebutton img').each(function(i) { $(this).hover( function () { $(this).animate({'opacity': 0.65}); }, function () { $(this).animate({'opacity': 1}); } ); }); $('.rounded').corners(); $('.gamebutton').each(function(i) { $(this).hover(function() { $('.gameTitlePopup').html($(this).attr('title')); FadeActive(); }); }); function FadeActive() { $('.activeInfo').fadeIn('slow'); } $('#gameInfoLeft').hover(function() { $(this).removeClass('activeInfo'); $(this).fadeOut('slow', function() { $('#gameInfoRight').addClass('activeInfo'); FadeActive(); }); }); $('#gameInfoRight').hover(function() { $(this).removeClass('activeInfo'); $(this).fadeOut('slow', function() { $('#gameInfoLeft').addClass('activeInfo'); FadeActive(); }); }); }); </script> Thanks for any help :).

    Read the article

  • JPA IndirectSet changes not reflected in Spring frontend

    - by Jon
    I'm having an issue with Spring JPA and IndirectSets. I have two entities, Parent and Child, defined below. I have a Spring form in which I'm trying to create a new Child and link it to an existing Parent, then have everything reflected in the database and in the web interface. What's happening is that it gets put into the database, but the UI doesn't seem to agree. The two entities that are linked to each other in a OneToMany relationship like so: @Entity @Table(name = "parent", catalog = "myschema", uniqueConstraints = @UniqueConstraint(columnNames = "ChildLinkID")) public class Parent { private Integer id; private String childLinkID; private Set<Child> children = new HashSet<Child>(0); @Id @GeneratedValue(strategy = IDENTITY) @Column(name = "id", unique = true, nullable = false) public Integer getId() { return this.id; } public void setId(Integer id) { this.id = id; } @Column(name = "ChildLinkID", unique = true, nullable = false, length = 6) public String getChildLinkID() { return this.childLinkID; } public void setChildLinkID(String childLinkID) { this.childLinkID = childLinkID; } @OneToMany(cascade = CascadeType.ALL, fetch = FetchType.LAZY, mappedBy = "parent") public Set<Child> getChildren() { return this.children; } public void setChildren(Set<Child> children) { this.children = children; } } @Entity @Table(name = "child", catalog = "myschema") public class Child extends private Integer id; private Parent parent; @Id @GeneratedValue(strategy = IDENTITY) @Column(name = "id", unique = true, nullable = false) public Integer getId() { return this.id; } public void setId(Integer id) { this.id = id; } @ManyToOne(fetch = FetchType.LAZY) @JoinColumn(name = "ChildLinkID", referencedColumnName = "ChildLinkID", nullable = false) public Parent getParent() { return this.parent; } public void setParent(Parent parent) { this.parent = parent; } } And of course, assorted simple properties on each of them. Now, the problem is that when I edit those simple properties from my Spring interface, everything works beautifully. I can persist new entities of these types and they'll appear when using the JPATemplate to do a find on, say, all Parents (getJpaTemplate().find("select p from Parent p")) or on individual entities by ID or another property. The problem I'm running into is that now, I'm trying to create a new Child linked to an existing Parent through a link from the Parent's page. Here's the important bits of the Controller (note that I've placed the JPA foo in the controller here to make it clearer; the actual JpaDaoSupport is actually in another class, appropriately tiered): protected Object formBackingObject(HttpServletRequest request) throws Exception { String parentArg = request.getParameter("parent"); int parentId = Integer.parseInt(parentArg); Parent parent = getJpaTemplate().find(Parent.class, parentId); Child child = new Child(); child.setParent(parent); NewChildCommand command = new NewChildCommand(); command.setChild(child); return command; } protected ModelAndView onSubmit(Object cmd) throws Exception { NewChildCommand command = (NewChildCommand)cmd; Child child = command.getChild(); child.getParent().getChildren().add(child); getJpaTemplate().merge(child); return new ModelAndView(new RedirectView(getSuccessView())); } Like I said, I can run through the form and fill in the new values for the Child -- the Parent's details aren't even displayed. When it gets back to the controller, it goes through and saves it to the underlying database, but the interface never reflects it. Once I restart the app, it's all there and populated appropriately. What can I do to clear this up? I've tried to call extra merges, tried refreshes (which gave a transaction exception), everything short of just writing my own database access code. I've made sure that every class has an appropriate equals() and hashCode(), have full JPA debugging on to see that it's making appropriate SQL calls (it doesn't seem to make any new calls to the Child table) and stepped through in the debugger (it's all in IndirectSets, as expected, and between saving and displaying the Parent the object takes on a new memory address). What's my next step?

    Read the article

  • Connecting a LAN to an OpenVPN server via a windows 7 client gateway

    - by user705142
    I've got OpenVPN set up between my windows 7 client and linux server. The goal is that I'll get secure access to a webapp running on the server from any computer on the client LAN. I'm using ccd to assign static ip addresses to each client connection, with key authentication. It's working on my client machine (10.83.41.9), and when you go to the gateway IP address (10.83.41.1), it loads up the webapp. Now I really need the other computers on the client LAN to be able to connect to the webapp as well, via the windows machine. The client has a static IP address of 192.168.2.100 on the LAN, and I've enabled IP forwarding in windows (confirmed by ipconfig /all). In my router I've forwarded 10.83.41.1 / 255.255.255.255 to 192.168.2.100. In server.conf I have.. route 192.168.2.0 255.255.255.0 And in the office ccd.. ifconfig-push 10.83.41.9 10.83.41.10 iroute 192.168.2.0 255.255.255.0 The client log is as follows: Thu Mar 15 20:19:56 2012 OpenVPN 2.2.2 Win32-MSVC++ [SSL] [LZO2] [PKCS11] built on Dec 15 2011 Thu Mar 15 20:19:56 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Thu Mar 15 20:19:56 2012 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Thu Mar 15 20:19:56 2012 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 LZO compression initialized Thu Mar 15 20:19:56 2012 Control Channel MTU parms [ L:1558 D:166 EF:66 EB:0 ET:0 EL:0 ] Thu Mar 15 20:19:56 2012 Socket Buffers: R=[8192->8192] S=[64512->64512] Thu Mar 15 20:19:56 2012 Data Channel MTU parms [ L:1558 D:1450 EF:58 EB:135 ET:0 EL:0 AF:3/1 ] Thu Mar 15 20:19:56 2012 Local Options hash (VER=V4): '9e7066d2' Thu Mar 15 20:19:56 2012 Expected Remote Options hash (VER=V4): '162b04de' Thu Mar 15 20:19:56 2012 UDPv4 link local: [undef] Thu Mar 15 20:19:56 2012 UDPv4 link remote: 111.65.224.202:1194 Thu Mar 15 20:19:56 2012 TLS: Initial packet from 111.65.224.202:1194, sid=ceb04c22 8cc6d151 Thu Mar 15 20:19:56 2012 VERIFY OK: depth=1, /C=NZ/O=XXX./CN=XXX Thu Mar 15 20:19:56 2012 VERIFY OK: nsCertType=SERVER Thu Mar 15 20:19:56 2012 VERIFY OK: depth=0, /C=NZ/O=XXX./CN=XXX Thu Mar 15 20:19:56 2012 Replay-window backtrack occurred [1] Thu Mar 15 20:19:56 2012 Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit key Thu Mar 15 20:19:56 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit key Thu Mar 15 20:19:56 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Thu Mar 15 20:19:56 2012 [server] Peer Connection Initiated with 111.65.224.202:1194 Thu Mar 15 20:19:58 2012 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Thu Mar 15 20:19:59 2012 PUSH: Received control message: 'PUSH_REPLY,route 10.83.41.1,topology net30,ping 10,ping-restart 120,ifconfig 10.83.41.9 10.83.41.10' Thu Mar 15 20:19:59 2012 OPTIONS IMPORT: timers and/or timeouts modified Thu Mar 15 20:19:59 2012 OPTIONS IMPORT: --ifconfig/up options modified Thu Mar 15 20:19:59 2012 OPTIONS IMPORT: route options modified Thu Mar 15 20:19:59 2012 ROUTE default_gateway=192.168.2.1 Thu Mar 15 20:19:59 2012 TAP-WIN32 device [OpenVPN] opened: \\.\Global\{B32D85C9-1942-42E2-80BA-7E0B5BB5185F}.tap Thu Mar 15 20:19:59 2012 TAP-Win32 Driver Version 9.9 Thu Mar 15 20:19:59 2012 TAP-Win32 MTU=1500 Thu Mar 15 20:19:59 2012 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.83.41.9/255.255.255.252 on interface {B32D85C9-1942-42E2-80BA-7E0B5BB5185F} [DHCP-serv: 10.83.41.10, lease-time: 31536000] Thu Mar 15 20:19:59 2012 Successful ARP Flush on interface [45] {B32D85C9-1942-42E2-80BA-7E0B5BB5185F} Thu Mar 15 20:20:04 2012 TEST ROUTES: 1/1 succeeded len=1 ret=1 a=0 u/d=up Thu Mar 15 20:20:04 2012 C:\WINDOWS\system32\route.exe ADD 10.83.41.1 MASK 255.255.255.255 10.83.41.10 Thu Mar 15 20:20:04 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Thu Mar 15 20:20:04 2012 Route addition via IPAPI succeeded [adaptive] Thu Mar 15 20:20:04 2012 Initialization Sequence Completed From the other machines I can ping 192.169.2.100, but not 10.83.41.1. In the how-to, it mentions "Make sure your network interface is in promiscuous mode." as well. I can't find in the windows network config, so this may or may not be part of it. Ideally this would be achieved without any special configuration the other LAN computers. Not sure how far I'm going to get on my own at this point, any ideas? Is there something I'm missing, or anything I should need to know?

    Read the article

  • css, unordered list not displaying icon in right place...

    - by Ronedog
    I'm really frustrated with this one. A few weeks ago I got it working in both firefox and ie just fine. Went back today to do some testing and found a problem with the display in firefox and I've been searching the code but can't find anything. I could use a few tips from anyone willing, I'm sure I'm looking at the wrong things. I upgraded my firefox version but I imagine my code is broke, not firefox. I'm assuming the problem is somewhere in my css file, but I'm not sure. Here's what I've confirmed so far. There don't seem to be conflicts in other css files with < ul 's or < li 's that may be overriding settings. The other confirmation is that This works fine in Internet Explorer...therefore I must be an idiot, because its usually been the other way around (working in FF, but failing in IE). Here's How it looks in IE (Notice the position of the folder icon right next to the text): Here's how it looks in FF (Notice the folder icon is not being pushed down with its corresponding text). Here's the Unordered List: <ul id="nav"> <li><a>Utah</a></li> <ul> <li><a>ParkCity</a> <ul> <li><a>Com1</a></li> <ul> <li class="folder_closed"><a>Timber</a></li> <div>SQUARE CONTAINER IS INSIDE THIS DIV</div> </ul> </ul> </ul> </ul> Here's the CSS that is used for the whole menu: /* MENU NAVIGATION (<UL><LI> LISTS ****************************************/ ul#nav{ /* This handles the main root <ul> */ margin-left:0; margin-right:0; padding-left:0px; text-indent:15px; } ul#nav div{ overflow: hidden; } #nav li>a:hover { cursor: pointer; } #nav li > ul{ /* This will hide any element with an id of "nav" and an "li" that has a direct child that is a "ul" */ display:none; margin-left:0px; margin-right:0px; padding-left:15px; padding-right:0px; text-indent:15px; } #nav li { list-style-type:none; list-style-image: none; } #nav > li{ vertical-align: top; left:0px; text-align:left; clear: both; margin:0px; margin-right:0px; padding-right:0px; } .menu_parent{ background-image: url(../images/maximize.png); background-repeat: no-repeat; background-position: 0px 1px; position:relative; } .menu_parent_minimized{ background-image: url(../images/minimize.png); background-repeat: no-repeat; background-position: 0px 1px; position:relative; } .folder_closed{ position:relative; background-image: url(../images/folder_closed12x14.png); background-repeat: no-repeat; background-position: 0px -2px; } .folder_open{ position:relative; background-image: url(../images/folder_open12x14.png); background-repeat: no-repeat; background-position: 0px -2px; } </ul>

    Read the article

  • Javascript/ajax/php question: sending from server to client works, sending from client to server fai

    - by Jeroen Willemsen
    Hey All, Sorry for reposting(Admins, please delete the other one!). since you guys have been a great help, I was kinda hoping that you could help me once again while having the following question: I am currently trying to work with AJAX by allowing a managerclass in PHP to communicate via an XmlHttpobject with the javascript on the clientside. However, I can send something to the client via JSON, but I cannot read it at the clientside. In fact I am getting the error that the "time" is an undefined index in Session. So I was wondering: what am I doing wrong? The javascriptcode for Ajax: <script type="text/javascript"> var sendReq = GetXmlHttpObject(); var receiveReq = GetXmlHttpObject(); var JSONIn = 0; var JSONOut= 0; //var mTimer; //function to retreive xmlHTTp object for AJAX calls (correct) function GetXmlHttpObject() { var xmlHttp=null; try { // Firefox, Opera 8.0+, Safari xmlHttp=new XMLHttpRequest(); } catch (e) { // Internet Explorer try { xmlHttp=new ActiveXObject("Msxml2.XMLHTTP"); } catch (e) { xmlHttp=new ActiveXObject("Microsoft.XMLHTTP"); } } return xmlHttp; } //Gets the new info from the server function getUpdate() { if (receiveReq.readyState == 4 || receiveReq.readyState == 0) { receiveReq.open("GET", "index.php?json="+JSONIn+"&sid=$this->session", true); receiveReq.onreadystatechange = updateState; receiveReq.send(null); } } //send a message to the server. function sendUpdate(JSONstringsend) { JSONOut=JSONstringsend; if (sendReq.readyState == 4 || sendReq.readyState == 0) { sendReq.open("POST", "index.php?json="+JSONstringsend+"&sid=$this->session", true); sendReq.setRequestHeader('Content-Type','application/x-www-form-urlencoded'); alert(JSONstringsend); sendReq.onreadystatechange = updateCycle; sendReq.send(JSONstringsend); } } //When data has been send, update the page. function updateCycle() { getUpdate(); } function updateState() { if (receiveReq.readyState == 4) { // JSONANSWER gets here (correct): var JSONtext = sendReq.responseText; // convert received string to JavaScript object (correct) alert(JSONtext); var JSONobject = JSON.parse(JSONtext); // updates date from the JSONanswer (correct): document.getElementById("dateview").innerHTML= JSONobject.date; } //mTimer = setTimeout('getUpdate();',2000); //Refresh our chat in 2 seconds } </script> The function that actually uses the ajax code: //datepickerdata $(document).ready(function(){ $("#datepicker").datepicker({ onSelect: function(dateText){ var JSONObject = {"date": dateText}; var JSONstring = JSON.stringify(JSONObject); sendUpdate(JSONstring); }, dateFormat: 'dd-mm-yy' }); }); </script> And the PHP code: private function handleReceivedJSon($json){ $this->jsonLocal=array(); $json=$_POST["json"]; $this->jsonDecoded= json_decode($json, true); if(isset($this->jsonDecoded["date"])){ $_SESSION["date"]=$this->jsonDecoded["date"]; $this->useddate=$this->jsonDecoded; } if(isset($this->jsonDecoded["logout"])){ session_destroy(); exit("logout"); } header("Last-Modified: " . gmdate( "D, d M Y H:i:s" ) . "GMT" ); header("Cache-Control: no-cache, must-revalidate" ); header("Pragma: no-cache" ); header("Content-Type: text/xml; charset=utf-8"); exit($json); }

    Read the article

  • How to show form in front in C#

    - by corlettk
    Folks, Please does anyone know how to show a Form from an otherwise invisible application, and have it get the focus (i.e. appear on top of other windows)? I'm working in C# .NET 3.5. I suspect I've taken "completely the wrong approach"... I do not Application.Run(new TheForm ()) instead I (new TheForm()).ShowModal()... The Form is basically a modal dialogue, with a few check-boxes; a text-box, and OK and Cancel Buttons. The user ticks a checkbox and types in a description (or whatever) then presses OK, the form disappears and the process reads the user-input from the Form, Disposes it, and continues processing. This works, except when the form is show it doesn't get the focus, instead it appears behind the "host" application, until you click on it in the taskbar (or whatever). This is a most annoying behaviour, which I predict will cause many "support calls", and the existing VB6 version doesn't have this problem, so I'm going backwards in usability... and users won't accept that (and nor should they). So... I'm starting to think I need to rethink the whole shebang... I should show the form up front, as a "normal application" and attach the remainer of the processing to the OK-button-click event. It should work, But that will take time which I don't have (I'm already over time/budget)... so first I really need to try to make the current approach work... even by quick-and-dirty methods. So please does anyone know how to "force" a .NET 3.5 Form (by fair means or fowl) to get the focus? I'm thinking "magic" windows API calls (I know Twilight Zone: This only appears to be an issue at work, we're I'm using Visual Studio 2008 on Windows XP SP3... I've just failed to reproduce the problem with an SSCCE (see below) at home on Visual C# 2008 on Vista Ulimate... This works fine. Huh? WTF? Also, I'd swear that at work yesterday showed the form when I ran the EXE, but not when F5'ed (or Ctrl-F5'ed) straight from the IDE (which I just put up with)... At home the form shows fine either way. Totaly confusterpating! It may or may not be relevant, but Visual Studio crashed-and-burned this morning when the project was running in debug mode and editing the code "on the fly"... it got stuck what I presumed was an endless loop of error messages. The error message was something about "can't debug this project because it is not the current project, or something... So I just killed it off with process explorer. It started up again fine, and even offered to recover the "lost" file, an offer which I accepted. using System; using System.Windows.Forms; namespace ShowFormOnTop { static class Program { [STAThread] static void Main() { Application.EnableVisualStyles(); Application.SetCompatibleTextRenderingDefault(false); //Application.Run(new Form1()); Form1 frm = new Form1(); frm.ShowDialog(); } } } Background: I'm porting an existing VB6 implementation to .NET... It's a "plugin" for a "client" GIS application called MapInfo. The existing client "worked invisibly" and my instructions are "to keep the new version as close as possible to the old version", which works well enough (after years of patching); it's just written in an unsupported language, so we need to port it. About me: I'm pretty much a noob to C# and .NET generally, though I've got a bottoms wiping certificate, I have been a professional programmer for 10 years; So I sort of "know some stuff". Any insights would be most welcome... and Thank you all for taking the time to read this far. Consiseness isn't (apparently) my forte. Cheers. Keith.

    Read the article

  • Set up linux box for hosting a-z

    - by microchasm
    I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP/MySQL: To upgrade PHP and MySQL to the latest versions, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! Add IUS repository to our package manager cd /tmp wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. # list all the packages in the IUS repository; use this to find PHP/MySQL version and libraries you want to install Remove old version of PHP and install newer version from IUS rpm -qa | grep php # to list all of the installed php packages we want to remove yum shell # open an interactive yum shell remove php-common php-mysql php-cli #remove installed PHP components install php53 php53-mysql php53-cli php53-common #add packages you want transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) Upgrade MySQL from IUS repository /etc/init.d/mysqld stop rpm -qa | grep mysql # to see installed mysql packages yum shell remove mysql mysql-server #remove installed MySQL components install mysql51 mysql51-server mysql51-devel transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell service mysqld start mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project Upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Install rssh (restricted shell) to provide scp and sftp access, without allowing ssh login cd /tmp wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm useradd -m -d /home/dev -s /usr/bin/rssh dev passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. vi /etc/rssh.conf Uncomment or add: allowscp allowsftp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). rssh instructions appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html Set up virtual interfaces ifconfig eth1:1 192.168.1.3 up #start up the virtual interface cd /etc/sysconfig/network-scripts/ cp ifcfg-eth1 ifcfg-eth1:1 #copy default script and match name to our virtual interface vi ifcfg-eth1:1 #modify eth1:1 script #ifcfg-eth1:1 | modify so it looks like this: DEVICE=eth1:1 IPADDR=192.168.1.3 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes NAME=eth1:1 Add more Virtual interfaces as needed by repeating. Because of the ONBOOT=yes line in the ifcfg-eth1:1 file, this interface will be brought up when the system boots, or the network starts/restarts. service network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] ping 192.168.1.3 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.105 ms And this is where I'm at. I will keep editing this as I make progress. Any tips on how to Configure virtual interfaces/ip based virtual hosts for SSL, setting up a CA, or anything else would be appreciated.

    Read the article

  • mouseover producing multiple images works in Firefox, but not i.e.

    - by tcantrel
    The code below allows the user to hover over 1 object and it not only replaces the object but also shows an additional object between the buttons. It works great in Firefox, but does not in Internet Explorer. HELP webpage: http://www.isp.ucar.edu/ Thx, Terri if ( < ocument.images) { img1on = new Image(); img1on.src = "images/buttons/button-beachon-on.gif"; img1off = new Image(); img1off.src = "images/buttons/button-beachon.gif"; img2on = new Image(); img2on.src = "images/buttons/button-bgs-on.gif"; img2off = new Image(); img2off.src = "images/buttons/button-bgs.gif"; img3on = new Image(); img3on.src = "images/buttons/button-iam-on.gif"; img3off = new Image(); img3off.src = "images/buttons/button-iam.gif"; img4on = new Image(); img4on.src = "images/buttons/button-nvia-on.gif"; img4off = new Image(); img4off.src = "images/buttons/button-nvia.gif"; img5on = new Image(); img5on.src = "images/buttons/button-utls-on.gif"; img5off = new Image(); img5off.src = "images/buttons/button-utls.gif"; img6on = new Image(); img6on.src = "images/buttons/button-water-on.gif"; img6off = new Image(); img6off.src = "images/buttons/button-water.gif"; img7on = new Image(); img7on.src = "images/buttons/button-exploratory-on.gif"; img7off = new Image(); img7off.src = "images/buttons/button-exploratory.gif"; // second image that does not appear in original button space img1ad = new Image(); img1ad.src = "images/buttons/beachon-overview-sm.gif"; img2ad = new Image(); img2ad.src = "images/buttons/bgs-overview-sm.gif"; img3ad = new Image(); img3ad.src = "images/buttons/iam-overview-sm.gif"; img4ad = new Image(); img4ad.src = "images/buttons/nvia-overview-sm.gif"; img5ad = new Image(); img5ad.src = "images/buttons/utls-overview-sm.gif"; img6ad = new Image(); img6ad.src = "images/buttons/water-overview-sm.gif"; img7ad = new Image(); img7ad.src = "images/buttons/exploratory-overview-sm.gif"; } function imgOn(imgName) { if ( < ocument.images) { document[imgName].src = eval(imgName + "on.src"); document["holder"].src = eval(imgName + "ad.src"); } } function imgOff(imgName) { if ( < ocument.images) { document[imgName].src = eval(imgName + "off.src"); document["holder"].src = "images/buttons/isp-overview-sm.gif"; } }

    Read the article

  • Java Refuses to Start - Could not reserve enough space for object heap

    - by Randyaa
    Background We have a pool of aproximately 20 linux blades. Some are running Suse, some are running Redhat. ALL share NAS space which contains the following 3 folders: /NAS/app/java - a symlink that points to an installation of a Java JDK. Currently version 1.5.0_10 /NAS/app/lib - a symlink that points to a version of our application. /NAS/data - directory where our output is written All our machines have 2 processors (hyperthreaded) with 4gb of physical memory and 4gb of swap space. We limit the number of 'jobs' each machine can process at a given time to 6 (this number likely needs to change, but that does not enter into the current problem so please ignore it for the time being). Some of our jobs set a Max Heap size of 512mb, some others reserve a Max Heap size of 2048mb. Again, we realize we could go over our available memory if 6 jobs started on the same machine with the heap size set to 2048, but to our knowledge this has not yet occurred. The Problem Once and a while a Job will fail immediately with the following message: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. We used to chalk this up to too many jobs running at the same time on the same machine. The problem happened infrequently enough (MAYBE once a month) that we'd just restart it and everything would be fine. The problem has recently gotten much worse. All of our jobs which request a max heap size of 2048m fail immediately almost every time and need to get restarted several times before completing. We've gone out to individual machines and tried executing them manually with the same result. Debugging It turns out that the problem only exists for our SuSE boxes. The reason it has been happening more frequently is becuase we've been adding more machines, and the new ones are SuSE. 'cat /proc/version' on the SuSE boxes give us: Linux version 2.6.5-7.244-bigsmp (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 SMP Mon Dec 12 18:32:25 UTC 2005 'cat /proc/version' on the RedHat boxes give us: Linux version 2.4.21-32.0.1.ELsmp ([email protected]) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-52)) #1 SMP Tue May 17 17:52:23 EDT 2005 'uname -a' gives us the following on BOTH types of machines: UTC 2005 i686 i686 i386 GNU/Linux No jobs are running on the machine, and no other processes are utilizing much memory. All of the processes currently running might be using 100mb total. 'top' currently shows the following: Mem: 4146528k total, 3536360k used, 610168k free, 132136k buffers Swap: 4194288k total, 0k used, 4194288k free, 3283908k cached 'vmstat' currently shows the following: procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 610292 132136 3283908 0 0 0 2 26 15 0 0 100 0 If we kick off a job with the following command line (Max Heap of 1850mb) it starts fine: java/bin/java -Xmx1850M -cp helloworld.jar HelloWorld Hello World If we bump up the max heap size to 1875mb it fails: java/bin/java -Xmx1875M -cp helloworld.jar HelloWorld Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. It's quite clear that the memory currently being used is for Buffering/Caching and that's why so little is being displayed as 'free'. What isn't clear is why there is a magical 1850mb line where anything higher means Java can't start. Any explanations would be greatly appreciated.

    Read the article

  • OpenVPN stopped working, what could have happened?

    - by jaja
    I have Openvpn, and it worked great when I used it on PC (Windows 8), then I copied all files (Certificates and config) to an Android 4 phone to use them. Now, Openvpn works on the phone, but not the PC. Specifically, when I open Google I get: The server at www.google.com can't be found, because the DNS lookup failed, but the VPN seems to be connected. I have a simple question, could the problem be because I copied the same files? Routing table before connecting:- IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.101 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.101 281 192.168.1.101 255.255.255.255 On-link 192.168.1.101 281 192.168.1.255 255.255.255.255 On-link 192.168.1.101 281 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.101 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.101 281 =========================================================================== Routing table after connecting:- IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.101 25 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 **.**.***.** 255.255.255.255 192.168.1.254 192.168.1.101 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.101 281 192.168.1.101 255.255.255.255 On-link 192.168.1.101 281 192.168.1.255 255.255.255.255 On-link 192.168.1.101 281 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.101 281 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.101 281 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Server conf:- port 1194 proto udp dev tun ca ca.crt cert myservername.crt key myservername.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 push "redirect-gateway def1" Client conf:- client dev tun proto udp remote 89.32.148.35 1194 resolv-retry infinite nobind persist-key persist-tun mute-replay-warnings ca ca.crt cert client1.crt key client1.key verb 3 comp-lzo redirect-gateway def1 Here is the log file:- Tue Dec 18 16:34:27 2012 OpenVPN 2.2.2 Win32-MSVC++ [SSL] [LZO2] [PKCS11] built on Dec 15 2011 Tue Dec 18 16:34:27 2012 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info. Tue Dec 18 16:34:27 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Tue Dec 18 16:34:27 2012 LZO compression initialized Tue Dec 18 16:34:27 2012 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue Dec 18 16:34:27 2012 Socket Buffers: R=[65536-65536] S=[65536-65536] Tue Dec 18 16:34:27 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue Dec 18 16:34:27 2012 Local Options hash (VER=V4): '41690919' Tue Dec 18 16:34:27 2012 Expected Remote Options hash (VER=V4): '530fdded' Tue Dec 18 16:34:27 2012 UDPv4 link local: [undef] Tue Dec 18 16:34:27 2012 UDPv4 link remote: ..*.:1194 Tue Dec 18 16:34:27 2012 TLS: Initial packet from ..*.:1194, sid=4d1496ad 2079a5fa Tue Dec 18 16:34:28 2012 VERIFY OK: depth=1, /C=/ST=/L=/O=/OU=/CN=/name=/emailAddress= Tue Dec 18 16:34:28 2012 VERIFY OK: depth=0, /C=/ST=/L=/O=/OU=/CN=/name=/emailAddress= Tue Dec 18 16:34:29 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue Dec 18 16:34:29 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Dec 18 16:34:29 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue Dec 18 16:34:29 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Dec 18 16:34:29 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Tue Dec 18 16:34:29 2012 [myservername] Peer Connection Initiated with ..*.:1194 Tue Dec 18 16:34:32 2012 SENT CONTROL [myservername]: 'PUSH_REQUEST' (status=1) Tue Dec 18 16:34:32 2012 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' Tue Dec 18 16:34:32 2012 OPTIONS IMPORT: timers and/or timeouts modified Tue Dec 18 16:34:32 2012 OPTIONS IMPORT: --ifconfig/up options modified Tue Dec 18 16:34:32 2012 OPTIONS IMPORT: route options modified Tue Dec 18 16:34:32 2012 ROUTE default_gateway=192.168.1.254 Tue Dec 18 16:34:32 2012 TAP-WIN32 device [Local Area Connection] opened: \.\Global{F0CFEBBF-9B1B-4CFB-8A82-027330974C30}.tap Tue Dec 18 16:34:32 2012 TAP-Win32 Driver Version 9.9 Tue Dec 18 16:34:32 2012 TAP-Win32 MTU=1500 Tue Dec 18 16:34:32 2012 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.8.0.6/255.255.255.252 on interface {F0CFEBBF-9B1B-4CFB-8A82-027330974C30} [DHCP-serv: 10.8.0.5, lease-time: 31536000] Tue Dec 18 16:34:32 2012 Successful ARP Flush on interface [26] {F0CFEBBF-9B1B-4CFB-8A82-027330974C30} Tue Dec 18 16:34:37 2012 TEST ROUTES: 2/2 succeeded len=1 ret=1 a=0 u/d=up Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD ..*. MASK 255.255.255.255 192.168.1.254 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=25 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD 0.0.0.0 MASK 128.0.0.0 10.8.0.5 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD 128.0.0.0 MASK 128.0.0.0 10.8.0.5 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD 10.8.0.1 MASK 255.255.255.255 10.8.0.5 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 Initialization Sequence Completed

    Read the article

  • How to deploy a visual studio custom tool?

    - by Aen Sidhe
    Hello. I have a my own custom tool for Visual Studio 2008 SP1. It consists of 5 assemblies: 3 assemblies with code that used heavily in my other projects, 1 assembly-wrapper above VS2008 SDK and assembly with the tool. If I'd debug my tool from visual studio, using "Run external program" option with command line "C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\devenv.exe" and arguments "/ranu /rootsuffix Exp" all work perfectly. After that I trying to deploy it to my working VS copy, not to experimental hive doing: gacutil /i Asm1.dll for all my assemblies and doing RegAsm Asm1.dll only for assembly with custom tool. Neither of utils prints any error, all work as planned, even registry keys appeared. But my tool don't work even after PC restart. What did I do wrong? Wrapper looks like that: [ComVisible(true)] public abstract class CustomToolBase : IVsSingleFileGenerator, IObjectWithSite { #region IVsSingleFileGenerator Members int IVsSingleFileGenerator.DefaultExtension(out string pbstrDefaultExtension) { pbstrDefaultExtension = ".cs"; return 0; } int IVsSingleFileGenerator.Generate(string wszInputFilePath, string bstrInputFileContents, string wszDefaultNamespace, IntPtr[] rgbOutputFileContents, out uint pcbOutput, IVsGeneratorProgress pGenerateProgress) { GenerationEventArgs gea = new GenerationEventArgs( bstrInputFileContents, wszInputFilePath, wszDefaultNamespace, new ServiceProvider(Site as Microsoft.VisualStudio.OLE.Interop.IServiceProvider) .GetService(typeof(ProjectItem)) as ProjectItem, new GenerationProgressFacade(pGenerateProgress) ); if (OnGenerateCode != null) { OnGenerateCode(this, gea); } byte[] bytes = gea.GetOutputCodeBytes(); int outputLength = bytes.Length; rgbOutputFileContents[0] = Marshal.AllocCoTaskMem(outputLength); Marshal.Copy(bytes, 0, rgbOutputFileContents[0], outputLength); pcbOutput = (uint)outputLength; return VSConstants.S_OK; } #endregion #region IObjectWithSite Members void IObjectWithSite.GetSite(ref Guid riid, out IntPtr ppvSite) { IntPtr pUnk = Marshal.GetIUnknownForObject(Site); IntPtr intPointer = IntPtr.Zero; Marshal.QueryInterface(pUnk, ref riid, out intPointer); ppvSite = intPointer; } void IObjectWithSite.SetSite(object pUnkSite) { Site = pUnkSite; } #endregion #region Public Members public object Site { get; private set; } public event EventHandler<GenerationEventArgs> OnGenerateCode; [ComRegisterFunction] public static void Register(Type type) { using (var parent = Registry.LocalMachine.OpenSubKey(@"Software\Microsoft\VisualStudio\9.0", true)) foreach (CustomToolRegistrationAttribute ourData in type.GetCustomAttributes(typeof(CustomToolRegistrationAttribute), false)) ourData.Register(x => parent.CreateSubKey(x), (x, name, value) => x.SetValue(name, value)); } [ComUnregisterFunction] public static void Unregister(Type type) { using (var parent = Registry.LocalMachine.OpenSubKey(@"Software\Microsoft\VisualStudio\9.0", true)) foreach (CustomToolRegistrationAttribute ourData in type.GetCustomAttributes(typeof(CustomToolRegistrationAttribute), false)) ourData.Unregister(x => parent.DeleteSubKey(x, false)); } #endregion } My tool code: [ComVisible(true)] [Guid("55A6C192-D29F-4e22-84DA-DBAF314ED5C3")] [CustomToolRegistration(ToolName, typeof(TransportGeneratorTool))] [ProvideObject(typeof(TransportGeneratorTool))] public class TransportGeneratorTool : CustomToolBase { private const string ToolName = "TransportGeneratorTool"; public TransportGeneratorTool() { OnGenerateCode += GenerateCode; } private static void GenerateCode(object s, GenerationEventArgs e) { try { var serializer = new XmlSerializer(typeof (Parser.System)); using (var reader = new StringReader(e.InputText)) using (var writer = new StringWriter(e.OutputCode)) { Generator.System = (Parser.System) serializer.Deserialize(reader); Generator.System.Namespace = e.Namespace; Generator.GenerateSource(writer); } } catch (Exception ex) { e.Progress.GenerateError(ex.ToString()); } } } Resulting registry keys: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\9.0\Generators] [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\9.0\Generators\{FAE04EC1-301F-11D3-BF4B-00C04F79EFBC}] [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\9.0\Generators\{FAE04EC1-301F-11D3-BF4B-00C04F79EFBC}\TransportGeneratorTool] @="TransportGeneratorTool" "CLSID"="{55a6c192-d29f-4e22-84da-dbaf314ed5c3}" "GeneratesDesignTimeSource"=dword:00000001 "GeneratesSharedDesignTimeSource"=dword:00000001

    Read the article

  • Register NSService with Command Alt NSKeyEquivalent

    - by mahal tertin
    my Application provides a Global Service. I'd like to install the service with a command-alt-key combination. the thing i do now is not very error prone and really hard to debug as don't really see what's happening: inside Info.plist: <key>NSServices</key> <array> <dict> <key>NSSendTypes</key> <array> <string></string> </array> <key>NSReturnTypes</key> <array> <string></string> </array> <key>NSMenuItem</key> <dict> <key>default</key> <string>Go To Window in ${PRODUCT_NAME}</string> </dict> <key>NSMessage</key> <string>bringZFToForegroundZoomOut</string> <key>NSPortName</key> <string>com.raskinformac.${PRODUCT_NAME:identifier}</string> </dict> </array> and in the code: CFStringRef serviceStatusName = (CFStringRef)[NSString stringWithFormat:@"%@ - %@ - %@", appIdentifier, appName, methodNameForService]; CFStringRef serviceStatusRoot = CFSTR("NSServicesStatus"); CFPropertyListRef pbsAllServices = (CFPropertyListRef) CFMakeCollectable ( CFPreferencesCopyAppValue(serviceStatusRoot, CFSTR("pbs")) ); // the user did not configure any custom services BOOL otherServicesDefined = pbsAllServices != NULL; BOOL ourServiceDefined = NO; if ( otherServicesDefined ) { ourServiceDefined = NULL != CFDictionaryGetValue((CFDictionaryRef)pbsAllServices, serviceStatusName); } NSUpdateDynamicServices(); NSMutableDictionary *pbsAllServicesNew = nil; if (otherServicesDefined) { pbsAllServicesNew = [NSMutableDictionary dictionaryWithDictionary:(NSDictionary*)pbsAllServices]; } else { pbsAllServicesNew = [NSMutableDictionary dictionaryWithCapacity:1]; } NSDictionary *serviceStatus = [NSDictionary dictionaryWithObjectsAndKeys: (id)kCFBooleanTrue, @"enabled_context_menu", (id)kCFBooleanTrue, @"enabled_services_menu", @"@~r", @"key_equivalent", nil]; [pbsAllServicesNew setObject:serviceStatus forKey:(NSString*)serviceStatusName]; CFPreferencesSetAppValue ( serviceStatusRoot, (CFPropertyListRef) pbsAllServicesNew, CFSTR("pbs")); Boolean result = CFPreferencesAppSynchronize(CFSTR("pbs")); if (result) { NSUpdateDynamicServices(); JLog(@"successfully installed our alt-command-R service"); } else { ALog(@"couldn't install our alt-command-R service"); } and to change the service: // once installed, its's a bit tricky to set new ones (works only in RELEASE somehow?) // quit finder // open "~/Library/Preferences/pbs.plist" and remove ch.ana.Zoom - Reveal Window in Zoom - bringZFToForegroundZoomOut inside NSServicesStatus and save // start app // /System/Library/CoreServices/pbs -dump_pboard (to see if it hat actually done what we wanted, might be empty) // /System/Library/CoreServices/pbs (to add the new services) // /System/Library/CoreServices/pbs -dump_pboard (see new linking) // and then /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder -NSDebugServices MY.APP.IDENTIFIER to restart finder so my question: is there a easier way to enable a Service with cmd-option-key? if yes, i'd gladly implement it in my software.

    Read the article

  • sshd running but no PID file

    - by dunxd
    I'm recently started using monit to monitor the status of sshd on my CentOS 5.4 server. This works fine, but every so often monit reports that sshd is no longer running. This isn't true - I am still able to login to the server via ssh, however I note the following: There is no longer any PID file at /var/run/sshd.pid - after a reboot this file exists. Once it is gone, restarting sshd via service sshd restart does not create the PID file. sudo service sshd status reports openssh-daemon is stopped - again, restarting sshd does not change this, but a reboot does. sudo service sshd stop reports failed, presumably because of the missing PID file. Any idea what is going on? Update sudo netstat -lptun gives the following output relating to port 22 tcp 0 0 :::22 :::* LISTEN 20735/sshd Killing the process with this PID as suggested by @Henry and then starting sshd via service results in service sshd status recognising the process by PID again. Would still like to understand this better. RPM verify suggested by a couple of answerers shows this: sudo rpm -vV openssh openssh-server openssh-clients | grep 'S\.5' S.5....T c /etc/pam.d/sshd S.5....T c /etc/ssh/sshd_config /etc/pam.d/sshd has the following contents: #%PAM-1.0 auth include system-auth account required pam_nologin.so account include system-auth password include system-auth session optional pam_keyinit.so force revoke session include system-auth #session required pam_loginuid.so Should that last line be commented out? Update Here's the output of @YannickGirouard 's script: $ sudo ./sshd_test Searching for the process listening on port 22... Found the following PID: 21330 Command line for PID 21330: /usr/sbin/sshd Listing process(es) relating to PID 21330: UID PID PPID C STIME TTY TIME CMD root 21330 1 0 14:04 ? 00:00:00 /usr/sbin/sshd Listing RPM information about openssh packages: Name : openssh Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:50:57 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 745390 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH implementation of SSH protocol versions 1 and 2 ------------------------------------------------------ Name : openssh-clients Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 871132 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH client applications ------------------------------------------------------ Name : openssh-server Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : System Environment/Daemons Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 492478 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH server daemon ------------------------------------------------------ However, I've since got things working by killing the process and starting afresh, as suggested by @Henry below, so perhaps I am no longer seeing the same thing. Will try again if I am seeing the issue again after next reboot. Update - 14 March Monit alerted me that sshd had disappeared, and again I am able to ssh onto the server. So now I can run the script $ sudo ./sshd_test Searching for the process listening on port 22... Found the following PID: 2208 Command line for PID 2208: /usr/sbin/sshd Listing process(es) relating to PID 2208: UID PID PPID C STIME TTY TIME CMD root 2208 1 0 Mar13 ? 00:00:00 /usr/sbin/sshd root 1885 2208 0 21:50 ? 00:00:00 sshd: dunx [priv] Listing RPM information about openssh packages: Name : openssh Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:50:57 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 745390 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH implementation of SSH protocol versions 1 and 2 ------------------------------------------------------ Name : openssh-clients Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 871132 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH client applications ------------------------------------------------------ Name : openssh-server Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : System Environment/Daemons Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 492478 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH server daemon ------------------------------------------------------ Again, when I look for /var/run/sshd.pid I don't find it. $ cat /var/run/sshd.pid cat: /var/run/sshd.pid: No such file or directory $ sudo netstat -anp | grep sshd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2208/sshd $ sudo kill 2208 $ sudo service sshd start Starting sshd: [ OK ] $ cat /var/run/sshd.pid 3794 $ sudo service sshd status openssh-daemon (pid 3794) is running... Is it possible that sshd is restarting and not creating a pidfile for some reason?

    Read the article

  • Random Complete System Unresponsiveness Running Mathematical Functions

    - by Computer Guru
    I have a program that loads a file (anywhere from 10MB to 5GB) a chunk at a time (ReadFile), and for each chunk performs a set of mathematical operations (basically calculates the hash). After calculating the hash, it stores info about the chunk in an STL map (basically <chunkID, hash>) and then writes the chunk itself to another file (WriteFile). That's all it does. This program will cause certain PCs to choke and die. The mouse begins to stutter, the task manager takes 2 min to show, ctrl+alt+del is unresponsive, running programs are slow.... the works. I've done literally everything I can think of to optimize the program, and have triple-checked all objects. What I've done: Tried different (less intensive) hashing algorithms. Switched all allocations to nedmalloc instead of the default new operator Switched from stl::map to unordered_set, found the performance to still be abysmal, so I switched again to Google's dense_hash_map. Converted all objects to store pointers to objects instead of the objects themselves. Caching all Read and Write operations. Instead of reading a 16k chunk of the file and performing the math on it, I read 4MB into a buffer and read 16k chunks from there instead. Same for all write operations - they are coalesced into 4MB blocks before being written to disk. Run extensive profiling with Visual Studio 2010, AMD Code Analyst, and perfmon. Set the thread priority to THREAD_MODE_BACKGROUND_BEGIN Set the thread priority to THREAD_PRIORITY_IDLE Added a Sleep(100) call after every loop. Even after all this, the application still results in a system-wide hang on certain machines under certain circumstances. Perfmon and Process Explorer show minimal CPU usage (with the sleep), no constant reads/writes from disk, few hard pagefaults (and only ~30k pagefaults in the lifetime of the application on a 5GB input file), little virtual memory (never more than 150MB), no leaked handles, no memory leaks. The machines I've tested it on run Windows XP - Windows 7, x86 and x64 versions included. None have less than 2GB RAM, though the problem is always exacerbated under lower memory conditions. I'm at a loss as to what to do next. I don't know what's causing it - I'm torn between CPU or Memory as the culprit. CPU because without the sleep and under different thread priorities the system performances changes noticeably. Memory because there's a huge difference in how often the issue occurs when using unordered_set vs Google's dense_hash_map. What's really weird? Obviously, the NT kernel design is supposed to prevent this sort of behavior from ever occurring (a user-mode application driving the system to this sort of extreme poor performance!?)..... but when I compile the code and run it on OS X or Linux (it's fairly standard C++ throughout) it performs excellently even on poor machines with little RAM and weaker CPUs. What am I supposed to do next? How do I know what the hell it is that Windows is doing behind the scenes that's killing system performance, when all the indicators are that the application itself isn't doing anything extreme? Any advice would be most welcome.

    Read the article

  • Log a user in to an ASP.net application using Windows Authentication without using Windows Authentic

    - by Rising Star
    I have an ASP.net application I'm developing authentication for. I am using an existing cookie-based log on system to log users in to the system. The application runs as an anonymous account and then checks the cookie when the user wants to do something restricted. This is working fine. However, there is one caveat: I've been told that for each page that connects to our SQL server, I need to make it so that the user connects using an Active Directory account. because the system I'm using is cookie based, the user isn't logged in to Active Directory. Therefore, I use impersonation to connect to the server as a specific account. However, the powers that be here don't like impersonation; they say that it clutters up the code. I agree, but I've found no way around this. It seems that the only way that a user can be logged in to an ASP.net application is by either connecting with Internet Explorer from a machine where the user is logged in with their Active Directory account or by typing an Active Directory username and password. Neither of these two are workable in my application. I think it would be nice if I could make it so that when a user logs in and receives the cookie (which actually comes from a separate log on application, by the way), there could be some code run which tells the application to perform all network operations as the user's Active Directory account, just as if they had typed an Active Directory username and password. It seems like this ought to be possible somehow, but the solution evades me. How can I make this work? Update To those who have responded so far, I apologize for the confusion I have caused. The responses I've received indicate that you've misunderstood the question, so please allow me to clarify. I have no control over the requirement that users must perform network operations (such as SQL queries) using Active Directory accounts. I've been told several times (online and in meat-space) that this is an unusual requirement and possibly bad practice. I also have no control over the requirement that users must log in using the existing cookie-based log on application. I understand that in an ideal MS ecosystem, I would simply dis-allow anonymous access in my IIS settings and users would log in using Windows Authentication. This is not the case. The current system is that as far as IIS is concerned, the user logs in anonymously (even though they supply credentials which result in the issuance of a cookie) and we must programmatically check the cookie to see if the user has access to any restricted resources. In times past, we have simply used a single SQL account to perform all queries. My direct supervisor (who has many years of experience with this sort of thing) wants to change this. He says that if each user has his own AD account to perform SQL queries, it gives us more of a trail to follow if someone tries to do something wrong. The closest thing I've managed to come up with is using WIF to give the user a claim to a specific Active Directory account, but I still have to use impersonation because even still, the ASP.net process presents anonymous credentials to the SQL server. It boils down to this: Can I log users in with Active Directory accounts in my ASP.net application without having the users manually enter their AD credentials? (Windows Authentication)

    Read the article

  • OS Missing? Messed up the MBR on Win7 64-bit

    - by hom3lesshom3boy
    I have a Windows 7 machine with two hard drives: a 1TB C: drive and 500GB J:. I had Windows XP installed on C: and Windows 7 installed on J:. I installed Windows 7 after Windows XP from an installer .exe I (legally) bought and downloaded. It, and all of my other files, are sitting on my J: drive intact. While under my Windows 7 install, a few days ago I decided to use Priform's CCleaner and use its DriveWipe utility to wipe the C: drive. 1% into the process, I cancelled and attempted to use it again. It gives me an error saying it can't format the drive, so I poke around the Internet a bit, give up, and restart my computer. I first get an "OS is missing" error after the computer boots past the BIOS. I downloaded and put UBCD on a bootable USB to use another drivewiping tool to completely erase the C: drive, hoping it'll take the problem with it. No luck. I try to use TestDisk to make my J: my primary active drive, but no luck. I still get the "OS is missing" error. Or sometimes it'll hang at Verifying DMI Pool. Or sometimes I'll get the "NTLDR is missing" error. I get hold of Hiren's and put it on another bootable USB. I first I tried the Boot Windows 7 from Hard Drive option, and I get "Error 15: File Not Found". I tried the "Fix 'NTLDR is Missing'" option (I'm not quite sure why this is even showing up, since I'm trying to get into a HDD with Windows 7 installed. Probably messed up somewhere when I used TestDisk) and I get this list: I'll run through the error messages I get: 1st Try - Windows could not start because the following file is missing or corrupt: \system32\hal.dll 2nd Try - Windows could not start because the following file is missing or corrupt: \system32\ntoskrnl.exe 3rd Try - Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. 4th - 8th Try - Same as #3 9th Try - I/O Error accessing boot sector file multi(0)disk(0)fdisk(0)\BOOTSEC.DOS. And computer freezes. 10th Try - computer restarts Needless to say, not a single one of those works. I then tried to open up the Windows 7 exe I have sitting on my J: from the Mini-XP OS on Hiren's, but it won't run because I'm trying to run a 64-bit file from a 32-bit exe. At least, that's the problem according to these guys: http://social.technet.microsoft.com/...-b2f54e9c7d18/ I then borrowed a 64-bit Windows Home Premium CD from a friend to get to the recovery options. But I get the error message: This version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows. I pressed Shift + F10 to get to the Command Prompt directly. These are the exact steps I took from there (paraphrased a little): X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. I restarted my computer, but it still didn't work. I unplugged the C: drive, then tried bootrec and Diskpart: X:\Sources> bootrec.exe X:\Sources> bootrec /RebuildBcd Total identified Windows installations: 1 [1] \\?\GLOBALROOT\Device\HarddiskVolume1\Windows Add installation to bootlist? Yes(Y)/No(N)/All(A):y The requested system device cannot be found. X:\Sources>DiskPart DISKPART> List Disk Disk # Status Size Free Dyn Gpt Disk 0_Online_465GB_0B_______* Disk 1 Online 1000MB 0B (this is Hiren's on a bootable usb) DISKPART> Select Disk 0 Disk 0 is now the selected disk. DISKPART> List Partition Partition # Type Size Offset Partition 1 System 465GB 31KB DISKPART> Select Partition 1 Partition 1 is now the selected partition DISKPART> Active The selected disk is not a fixed MBR disk. The ACTIVE command can only be used on fixed MBR disks. DISKPART> exit Leaving Diskpart... X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. Before I go any further, is there anything I'm overlooking/doing wrong? All I care about is making the J: and Windows 7 bootable again. SPECS: Windows 7 Professional 64-Bit GIGABYTE - Motherboard - Socket 775 - GA-P35-DS3R (rev. 2.1) Crucial Ballistix 2048MB PC6400 DDR2 800MHz (2x2GB) Intel Core 2 Duo E6700 Processor (2.6 (6GHZ) I think... not sure anymore C: HDD - SAMSUNG HD103UJ (1TB, not plugged in) J: HDD - WDC WD5000AKS-00V1A0 (500GB)

    Read the article

  • Improving TCP performance over a gigabit network lots of connections and high traffic for storage and streaming services

    - by Linux Guy
    I have two servers, Both servers hardware Specification are Processor : Dual Processor RAM : over 128 G.B Hard disk : SSD Hard disk Outging Traffic bandwidth : 3 Gbps network cards speed : 10 Gbps Server A : for Encoding videos Server B : for storage videos andstream videos over web interface like youtube The inbound bandwidth between two servers is 10Gbps , the outbound bandwidth internet bandwidth is 500Mpbs Both servers using public ip addresses in public and private network Both servers transfer and connection on nginx port , and the server B used for streaming media , like youtube stream videos Both servers in same network , when i do ping from Server A to Server B i got high time latency above 1.0ms , the time range time=52.7 ms to time=215.7 ms - This is the output of iftop utility 353Mb 707Mb 1.04Gb 1.38Gb 1.73Gb mqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqq server.example.com => ip.address 6.36Mb 4.31Mb 1.66Mb <= 158Kb 94.8Kb 35.1Kb server.example.com => ip.address 1.23Mb 4.28Mb 1.12Mb <= 17.1Kb 83.5Kb 21.9Kb server.example.com => ip.address 395Kb 3.89Mb 1.07Mb <= 6.09Kb 109Kb 28.6Kb server.example.com => ip.address 4.55Mb 3.83Mb 1.04Mb <= 55.6Kb 45.4Kb 13.0Kb server.example.com => ip.address 649Kb 3.38Mb 1.47Mb <= 9.00Kb 38.7Kb 16.7Kb server.example.com => ip.address 5.00Mb 3.32Mb 1.80Mb <= 65.7Kb 55.1Kb 29.4Kb server.example.com => ip.address 387Kb 3.13Mb 1.06Mb <= 18.4Kb 39.9Kb 15.0Kb server.example.com => ip.address 3.27Mb 3.11Mb 1.01Mb <= 81.2Kb 64.5Kb 20.9Kb server.example.com => ip.address 1.75Mb 3.08Mb 2.72Mb <= 16.6Kb 35.6Kb 32.5Kb server.example.com => ip.address 1.75Mb 2.90Mb 2.79Mb <= 22.4Kb 32.6Kb 35.6Kb server.example.com => ip.address 3.03Mb 2.78Mb 1.82Mb <= 26.6Kb 27.4Kb 20.2Kb server.example.com => ip.address 2.26Mb 2.66Mb 1.36Mb <= 51.7Kb 49.1Kb 24.4Kb server.example.com => ip.address 586Kb 2.50Mb 1.03Mb <= 4.17Kb 26.1Kb 10.7Kb server.example.com => ip.address 2.42Mb 2.49Mb 2.44Mb <= 31.6Kb 29.7Kb 29.9Kb server.example.com => ip.address 2.41Mb 2.46Mb 2.41Mb <= 26.4Kb 24.5Kb 23.8Kb server.example.com => ip.address 2.37Mb 2.39Mb 2.40Mb <= 28.9Kb 27.0Kb 28.5Kb server.example.com => ip.address 525Kb 2.20Mb 1.05Mb <= 7.03Kb 26.0Kb 12.8Kb qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq TX: cum: 102GB peak: 1.65Gb rates: 1.46Gb 1.44Gb 1.48Gb RX: 1.31GB 24.3Mb 19.5Mb 18.9Mb 20.0Mb TOTAL: 103GB 1.67Gb 1.48Gb 1.46Gb 1.50Gb I check the transfer speed using iperf utility From Server A to Server B # iperf -c 0.0.0.2 -p 8777 ------------------------------------------------------------ Client connecting to 0.0.0.2, TCP port 8777 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 3] local 0.0.0.1 port 38895 connected with 0.0.0.2 port 8777 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.8 sec 528 KBytes 399 Kbits/sec My Current Connections in Server B # netstat -an|grep ":8777"|awk '/tcp/ {print $6}'|sort -nr| uniq -c 2072 TIME_WAIT 28 SYN_RECV 1 LISTEN 189 LAST_ACK 139 FIN_WAIT2 373 FIN_WAIT1 3381 ESTABLISHED 34 CLOSING Server A Network Card Information Settings for eth0: Supported ports: [ TP ] Supported link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: external Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes Server B Network Card Information Settings for eth2: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes ifconfig server A eth0 Link encap:Ethernet HWaddr 00:25:90:ED:9E:AA inet addr:0.0.0.1 Bcast:0.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1202795665 errors:0 dropped:64334 overruns:0 frame:0 TX packets:2313161968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:893413096188 (832.0 GiB) TX bytes:3360949570454 (3.0 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2207544 errors:0 dropped:0 overruns:0 frame:0 TX packets:2207544 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:247769175 (236.2 MiB) TX bytes:247769175 (236.2 MiB) ifconfig Server B eth2 Link encap:Ethernet HWaddr 00:25:90:82:C4:FE inet addr:0.0.0.2 Bcast:0.0.0.2 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39973046980 errors:0 dropped:1828387600 overruns:0 frame:0 TX packets:69618752480 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3013976063688 (2.7 TiB) TX bytes:102250230803933 (92.9 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1049495 errors:0 dropped:0 overruns:0 frame:0 TX packets:1049495 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:129012422 (123.0 MiB) TX bytes:129012422 (123.0 MiB) Netstat -i on Server B # netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth2 9000 0 42098629968 0 2131223717 0 73698797854 0 0 0 BMRU lo 65536 0 1077908 0 0 0 1077908 0 0 0 LRU I Turn up send/receive buffers on the network card to 2048 and problem still persist I increase the MTU for server A and problem still persist and i increase the MTU for server B for better connectivity and transfer speed but it couldn't transfer at all The problem is : as you can see from iperf utility, the transfer speed from server A to server B slow when i restart network service in server B the transfer in server A at full speed, after 2 minutes , it's getting slow How could i troubleshoot slow speed issue and fix it in server B ? Notice : if there any other commands i should execute in servers for more information, so it might help resolve the problem , let me know in comments

    Read the article

  • Permission forbidden on localhost with apache2

    - by N Alex
    Here is what I am trying to do. I tried to add another folder to apache and I get the following error when trying to acces testing/index.html. The idea is that I would like to have for every customer a folder like /home/neagoe/Work/InterWebs/Projects/[PROJECT NAME]/CustomerProjects/website/dist. Forbidden You don't have permission to access /index.html on this server. Apache/2.2.22 (Ubuntu) Server at testing Port 80 Here are the steps that I followed: Step1: sudo chmod a+x /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist Step2: sudo chown -R www-data:www-data /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist sudo chmod -R 775 /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist Step3: sudo adduser $USER www-data Step4: sudo a2enmod userdir Step5: sudo cp /etc/apache/sites-available/default /etc/apache/sites-available/testing I edited the file /etc/apache/sites-available/testing so it looks like this: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName testing DocumentRoot /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist/ > Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Step6: I edited hosts ("/etc/hosts") so it looks like this: 127.0.0.1 localhost 127.0.0.1 testing # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters Step7: sudo a2ensite testing sudo service apache2 restart I searched for about 2 hours on the internet but I can't figure out what went wrong. All the pages that I found following the same steps as described above. I know there are similar questions here on the internet, but the answer is to change permission to the directory which I did on Step2. I am sorry if this is really a duplicate but I could't find the right answer. Thank you! PS. I asked this also on AskUbuntu but didn't get any answers so I'm trying my luck here. Edit: There isn't much on the error log or the access log. On the access.log: ::1 - - [10/Aug/2013:11:23:28 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:29 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:31 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:32 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:33 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:34 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:35 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" 127.0.0.1 - - [10/Aug/2013:11:23:23 +0300] "POST /wordpress-testing/wp-cron.php?doing_wp_cron=1376123003.7026669979095458984375 HTTP/1.0" 200 705 "-" "WordPress/3.6; http://localhost/wordpress-testing" ::1 - - [10/Aug/2013:11:23:36 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:37 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:38 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" 127.0.0.1 - - [10/Aug/2013:11:31:32 +0300] "GET /index.html HTTP/1.1" 200 485 "-" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:23.0) Gecko/20100101 Firefox/23.0" And the last line repeats for about 200 rows. On the error.log: 1. This lines repeat from time to time. PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525 /msql.so' - /usr/lib/php5/20100525/msql.so: cannot open shared object file: No such file or directory in Unknown on line 0 [Sat Aug 10 13:06:42 2013] [notice] Apache/2.2.22 (Ubuntu) PHP/5.4.9-4ubuntu2.2 configured -- resuming normal operations [Sat Aug 10 13:07:36 2013] [notice] caught SIGTERM, shutting down PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/msql.so' - /usr/lib/php5/20100525/msql.so: cannot open shared object file: No such file or directory in Unknown on line 0 [Sat Aug 10 13:07:37 2013] [notice] Apache/2.2.22 (Ubuntu) PHP/5.4.9-4ubuntu2.2 configured -- resuming normal operations 2. And this is the predominant error. (hundreds of lines) [Sat Aug 10 13:07:40 2013] [error] [client 127.0.0.1] (13)Permission denied: access to /index.html denied

    Read the article

  • Unable to browse some pdfs and docs.

    - by JamesEggers
    I have a web site that uses Microsoft Indexing Service to index and query a directory that holds various documents of type pdf, rtf, mht, and doc. The indexing and querying works well (for the most part); however, some files will load while others will not. This is a Windows Server 2003 box running the site using IIS 6. The indexed directory is a sub directory off of the site's root directory (i.e. http://my.domain.com/files/). The file paths are accurate in the URL; however, I can only access some of the files of each file type. The files that I cannot access give a 404 File Not Found. I am able to open all files via windows explorer;however, attempting to open them via a browser over http is hit and miss. Has anyone experienced this issue and know how to resolve it? Anyone have any idea why I could access some files but not others? Does anyone have any recommendations on what to look into to try this (i.e. does owner matter or something like that?)? EDIT: Here is the Request and Response Headers for a bad file: GET /files/file1.pdf HTTP/1.1 Accept: image/gif, image/jpeg, image/pjpeg, image/pjpeg, application/x-shockwave-flash, application/xaml+xml, application/vnd.ms-xpsdocument, application/x-ms-xbap, application/x-ms-application, application/x-silverlight, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, / Accept-Language: en-us User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.590; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Accept-Encoding: gzip, deflate Proxy-Connection: Keep-Alive Host: my.domain.com HTTP/1.1 404 Not Found Content-Length: 1635 Content-Type: text/html Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET Date: Mon, 01 Jun 2009 15:38:54 GMT [typical 404 page markup excluded] Here is the Request/Response headers for the good file: GET /files/file2.pdf HTTP/1.1 Accept: image/gif, image/jpeg, image/pjpeg, image/pjpeg, application/x-shockwave-flash, application/xaml+xml, application/vnd.ms-xpsdocument, application/x-ms-xbap, application/x-ms-application, application/x-silverlight, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, / Accept-Language: en-us User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.590; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Accept-Encoding: gzip, deflate Proxy-Connection: Keep-Alive Host: my.domain.com HTTP/1.1 200 OK Content-Length: 352464 Content-Type: application/pdf Last-Modified: Tue, 13 Jan 2009 15:27:35 GMT Accept-Ranges: bytes ETag: "74ccc5759375c91:2a47" Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET Date: Mon, 01 Jun 2009 15:50:33 GMT

    Read the article

  • How to invalidate nginx reverse proxy cache in front of other nginx servers?

    - by Olivier Lance
    I'm running a Proxmox server on a single IP address, that will dispatch HTTP requests to containers depending on the requested host. I am using nginx on the Proxmox side to listen to HTTP requests and I am using the proxy_pass directive in my different server blocks to dispatch requests according to the server_name. My containers run on Ubuntu and are also running a nginx instance. I'm having troubles with caching on a particular website that is fully static: nginx keeps on serving me stale content after files updates, until I: Clear /var/cache/nginx/ and restart nginx or set proxy_cache off for this server and reload the config Here's the detail of my configuration: On the server (proxmox): /etc/nginx/nginx.conf: user www-data; worker_processes 8; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; use epoll; } http { ## # Basic Settings ## sendfile on; #tcp_nopush on; tcp_nodelay on; #keepalive_timeout 65; types_hash_max_size 2048; server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; client_body_buffer_size 1k; client_max_body_size 8m; large_client_header_buffers 1 1K; ignore_invalid_headers on; client_body_timeout 5; client_header_timeout 5; keepalive_timeout 5 5; send_timeout 5; server_name_in_redirect off; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; gzip_vary on; gzip_proxied any; gzip_comp_level 6; # gzip_buffers 16 8k; gzip_http_version 1.1; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; limit_conn_zone $binary_remote_addr zone=gulag:1m; limit_conn gulag 50; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } /etc/nginx/conf.d/proxy.conf: proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_hide_header X-Powered-By; proxy_intercept_errors on; proxy_buffering on; proxy_cache_key "$scheme://$host$request_uri"; proxy_cache_path /var/cache/nginx levels=1:2 keys_zone=cache:10m inactive=7d max_size=700m; /etc/nginx/sites-available/my-domain.conf: server { listen 80; server_name .my-domain.com; access_log off; location / { proxy_pass http://my-domain.local:80/; proxy_cache cache; proxy_cache_valid 12h; expires 30d; proxy_cache_use_stale error timeout invalid_header updating; } } On the container (my-domain.local): nginx.conf: (everything is inside the main config file -- it's been done quickly...) user www-data; worker_processes 1; error_log logs/error.log; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; #tcp_nopush on; keepalive_timeout 65; gzip off; server { listen 80; server_name .my-domain.com; root /var/www; access_log logs/host.access.log; } } I've read many blog posts and answers before resolving to posting my own questions... most answers I can see suggest setting sendfile off; but that didn't work for me. I have tried many other things, double checked my settings and all seems fine. So I'm wondering whether I am not expecting nginx's cache to do something it's not meant to...? Basically, I thought that if one of my static files in my container was updated, the cache in my reverse proxy would be invalidated and my browser would get the new version of the file when it requests it... But I now have the sentiment I misunderstood many things. Of all things, I now wonder how nginx on the server can know about a file in the container has changed? I have seen a directive proxy_header_pass (or something alike), should I use this to let the nginx instance from the container somehow inform the one in Proxmox about updated files? Is this expectation just a dream, or can I do it with nginx on my current architecture?

    Read the article

  • how to add a function to that program, and call that function from the command line in the function

    - by user336291
    a#include "smallsh.h" /*include file for example*/ /*program buffers and work pointers*/ static char inpbuf[MAXBUF], tokbuf[2*MAXBUF], *ptr = inpbuf, *tok = tokbuf; userin(p) /*print prompt and read a line*/ char *p; { int c, count; /*initialization for later routines*/ ptr = inpbuf; tok = tokbuf; /*display prompt*/ printf("%s ",p); for(count = 0;;) { if((c = getchar()) == EOF) return(EOF); if(count<MAXBUF) inpbuf[count++] = c; if(c == '\n' && count <MAXBUF) { inpbuf[count] = '\0'; return(count); } /*if line too long restart*/ if(c == '\n') { printf("smallsh:input line too long\n"); count = 0; printf("%s",p); } } } gettok(outptr) /*get token and place into tokbuf*/ char **outptr; { int type; *outptr = tok; /*strip white space*/ for(;*ptr == ' ' || *ptr == '\t'; ptr++) ; *tok++ = *ptr; switch(*ptr++) { case '\n': type = EOL; break; case '&': type = AMPERSAND; break; case ';': type = SEMICOLON; break; case '#': type = POUND; break; default: type = ARG; while(inarg(*ptr)) *tok++ = *ptr++; } *tok++ = '\0'; return(type); } static char special[]= {' ', '\t', '&', ':', '\n', '\0'}; inarg(c) /*are we in an ordinary argument*/ char c; { char *wrk; for(wrk = special;*wrk != '\0';wrk++) if(c == *wrk) return(0); return(1); } #include "smallsh.h" procline() /*process input line*/ { char *arg[MAXARG+1]; /*pointer array for runcommand*/ int toktype; /*type of token in command*/ int narg; /*number of arguments so far*/ int type; /*FOREGROUND or BACKGROUND*/ for(narg = 0;;) { /*loop FOREVER*/ /*take action according to token type*/ switch(toktype = gettok(&arg[narg])) { case ARG: if(narg<MAXARG) narg++; break; case EOL: case SEMICOLON: case AMPERSAND: case POUND: type = (toktype == AMPERSAND) ? BACKGROUND : FOREGROUND; if(narg!=0) { arg[narg] = NULL; runcommand(arg, type); } if((toktype == EOL)||(toktype=POUND)) return; narg = 0; break; } } } #include "smallsh.h" /*execute a command with optional wait*/ runcommand(cline,where) char **cline; int where; { int pid, exitstat, ret; if((pid = fork()) <0) { perror("smallsh"); return(-1); } if(pid == 0) { /*child*/ execvp(*cline, cline); perror(*cline); exit(127); } /*code for parent*/ /*if background process print pid and exit*/ if(where == BACKGROUND) { printf("[Process id %d]\n", pid); return(0); } /*wait until process pid exists*/ while( (ret=wait(&exitstat)) != pid && ret != -1) ; return(ret == -1 ? -1 : exitstat); } #include "smallsh.h" char *prompt = "Command>"; /*prompt*/ main() { while(userin(prompt) != EOF) procline(); }

    Read the article

  • How to replace slide effect to fade out/fade in effect on this slideshow?

    - by LDam
    Hi guys! I need replace slide effect to fade-out/fade-in effect on the prev and next slide functions: function animate(dir,clicked){ u = true; switch(dir){ case 'next': t = t+1; m = (-(t*w-w)); current(t); if(o.autoHeight){autoHeight(t);} if(s<3){ if (t===3){$(o.slides,obj).children(':eq(0)').css({left:(s*w)});} if (t===2){$(o.slides,obj).children(':eq('+(s-1)+')').css({position:'absolute',left:(w)});} } $(o.slides,obj).animate({left: m}, o.slidespeed,function(){ if (t===s+1) { t = 1; $(o.slides,obj).css({left:0},function(){$(o.slides,obj).animate({left:m})}); $(o.slides,obj).children(':eq(0)').css({left: 0}); $(o.slides,obj).children(':eq('+(s-1)+')').css({ position:'absolute',left:-w}); } if (t===s) $(o.slides,obj).children(':eq(0)').css({left:(s*w)}); if (t===s-1) $(o.slides,obj).children(':eq('+(s-1)+')').css({left:s*w-w}); u = false; }); break; case 'prev': t = t-1; m = (-(t*w-w)); current(t); if(o.autoHeight){autoHeight(t);} if (s<3){ if(t===0){$(o.slides,obj).children(':eq('+(s-1)+')').css({position:'absolute',left:(-w)});} if(t===1){$(o.slides,obj).children(':eq(0)').css({position:'absolute',left:0});} } $(o.slides,obj).animate({left: m}, o.slidespeed,function(){ if (t===0) { t = s; $(o.slides,obj).children(':eq('+(s-1)+')').css({position:'absolute',left:(s*w-w)}); $(o.slides,obj).css({left: -(s*w-w)}); $(o.slides,obj).children(':eq(0)').css({left:(s*w)}); } if (t===2 ) $(o.slides,obj).children(':eq(0)').css({position:'absolute',left:0}); if (t===1) $(o.slides,obj).children(':eq('+ (s-1) +')').css({position:'absolute',left:-w}); u = false; }); break; case 'fade': t = [t]*1; m = (-(t*w-w)); current(t); if(o.autoHeight){autoHeight(t);} $(o.slides,obj).children().fadeOut(o.fadespeed, function(){ $(o.slides,obj).css({left: m}); $(o.slides,obj).children(':eq('+(s-1)+')').css({left:s*w-w}); $(o.slides,obj).children(':eq(0)').css({left:0}); if(t===s){$(o.slides,obj).children(':eq(0)').css({left:(s*w)});} if(t===1){$(o.slides,obj).children(':eq('+(s-1)+')').css({ position:'absolute',left:-w});} $(o.slides,obj).children().fadeIn(o.fadespeed); u = false; }); break; default: break; } }; I had tried, but the auto restart didn't work! You can view the documentation and download the complete code with the examples in this link: http://github.com/nathansearles/loopedSlider/tree/master Please help me! (Sorry for my bad english!)

    Read the article

< Previous Page | 401 402 403 404 405 406 407 408 409 410 411 412  | Next Page >