Search Results

Search found 16640 results on 666 pages for 'computer tower'.

Page 406/666 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

• What are good values for PSU voltages?

  - by earlz

  Hello, I have an odd computer I'm trying to fix that will crash only during the setup of an OS(crashes on every OS I've tried so far) It's not overheating and it is stripped down as much as possible and I've tried multiple harddrives, and memtest86+ can run on it for 3 hours without a crash or fail. So, I was a bit stumped and was looking in the BIOS for possible causes and found a hardware monitor that shows PSU voltages. They are: VCORE: 1.432V 3.3V: 3.136V 5V: 5.273 12V: 12.144V I thought the 3.3V looked a little low, but I'm not really sure on how "bad" that is. So, what are the good ranges for the voltages on each CPU rail?

  Read the article

• Vista Startup Repair cannot repair my Toshiba Laptop (L300D)

  - by tdot

  I installed some updates, and now the computer doesn't boot up, it just keep's telling me to go to repair, which doesn't fix the problem. I see the BSOD on startup, but it flashes by too quick. (I also don't have Vista on DVD to do a reinstall if I need to) This is what I get from the Startup Repair details Problem Event Name StartupRepair V2 Problem Signature 01: External Media Problem Signature 02: 6.0.6001.18000.6.0.6001.18000 Problem Signature 03: 2 Problem Signature 04: 131074 Problem Signature 05: BadDriver Problem Signature 06: NoBootFailure Problem Signature 07: 0 Problem Signature 08: 0 Problem Signature 09: unknown Problem Signature 10: 1168 OS Version: 6.0.6001.2.1.0.256.1 Local ID: 1033 Any help will be appreciated. Thanks.

  Read the article

• Windows 7 won't recognize backup set can I script extracting the files in some other way?

  - by datatoo

  The Windows 7 Backup/Restore created multiple backup sets and I was able to restore the oldest version, but not the most recent, which is not seen by the application. I do see all of the zip files and there are hundreds in later versions. Is there a way to extract each of these correctly outside of the regular restoration method? Perhaps scripting an extract of each day one after another? further clarifying The backup files were all made to an external drive. The original computer died completely, power supply, drives everything. I am trying to reconstruct as much as possible and the only backup set recognized is 6 months older. This was recovered over a new install, but unzipping thousands of zip files is not really a simple unzip copy project as the original paths are not a simple thing to reconstruct.

  Read the article

• Cannot uninstall Office Live Add-in 1.4 after installing Office 2010

  - by Shevek

  Last night I upgraded to Office 2010 RTM from MSDN. I'm now trying to uninstall the Office Live Add-in that I used with Office 2007 as this functionality is built in to Office 2010. When I run the uninstall from control panel I get the following message: Microsoft Office Live Add-in cannot be installed because you do not have the right version of Microsoft Office installed on your computer Google has pointed to 2 solutions, both of which are pretty useless: Use the MS Windows Installer Cleanup - this is not good because all it does is remove the Installer entry from the registry, leaving all the installed files behind Uninstall Office 2010, uninstall Add-in, reinstall Office 2010 - that is just rediculous, but typical MS response So, can I get this off my system without resorting to option 2?

  Read the article

• Clickonce applications being allowed through firewall

  - by DanielF

  The company I work for uses an application that is deployed through clickonce. This means that everytime they update said program the program regenerates in a new location ie: C:\Users\%username%\AppData\Local\Apps\2.0\89XCT43D.10T\WBZ8WE7L.927\trm8..tion_1ad39bb503bcb5df_0008.0005_14829906c9aa8611\%appname%.exe Recently the computers were updated to windows 7 machines and now everytime an update is pushed out the windows firewall see this as a new application and prompts the users to allow the program through the firewall. THis means I have to walk around to every computer and type in admin credentials. Does anyone know of a way to allow the application regardless of the path it is in? Google has not been very helpful so far.

  Read the article

• Late 2008 Unibody MacBook Pro, Snow Leopard EFI 1.8 downgrade

  - by SiLo

  Question: Does anyone know of an EFI downgrade for user on 1.8? I have found a 1.7 to 1.6 downgrade, but once on 1.8 this downgrade no longer works. Background: After upgrading to Snow Leopard, and installing the EFI 1.8 update (as recommended by Software Update), I have lost the ability to burn discs. This also includes when using external burners and when booting into Vista using Bootcamp. Other seemingly related problems to the EFI I have are, chronic overheating, random temporary beachball lockups, longer boot times. These 'other' problems have been solved for other users who experienced these problems on EFI 1.7, but were able to rollback to 1.6. I am looking for a solution that does not require sending my computer back to Apple.

  Read the article

• Ubuntu 14.04 boot error on Windows 8.1 - SYSLINUX 4.07 EDD

  - by nainai

  I want to replace Windows 8.1 that came with my laptop with Ubuntu 14.04. I keep getting a black screen with this line: SYSLINUX 4.07 EDD 2013-07-25 Copyright (C) 1994-2013 H. Peter Anvin et al Things I did before: turned off fast boot disabled secure boot switched to Legacy instead of UEFI (even though a tutorial I found said this isn't really needed anymore, I still did anyway because I read it from the laptop's user guide: "If you need to install a legacy operating system, such as Windows (that is, any operating system before Windows 8), Linux or Dos, etc on your computer, you must change the boot mode to Legacy support." I chose to load from USB. and then that SYSLINUX 4.77 EDD.... appears I tried to install using the same USB on an old Lenovo S10-3. It worked. Though that S10-3 runs Lubuntu. Still it's probably safe to say that it's not the USB that has problems, right? Thanks for any help. I can't wait to have Ubuntu :) edit: This might be useful info. The USB is 16GB X-Stor Fat32. I used YUMI.

  Read the article

• Setup Linksys 3200 remote access

  - by Greg

  I'm trying to setup remote access for my linksys 3200 so that I can configure it through the WAN port. I have turned on remote access, however when I try to connect I get a 404 error. The settings I have are: When I try to access xxx.xxx.xxx.xxx:9999 I just get a 404 error. I have allowed RDP access to a computer behind the router and this works fine on the same IP address. Any idea's on what else I have to do to allow remote management access? UPDATE: I tried changing the port to 80 and it works. Change it back to any other number and it doesn't work. Modem is setup with a DMZ to the router's IP. Why does it only work on port 80? BTW I can't use port 80 because there is a website hosted behind the router.

  Read the article

• sudo: must be setuid root

  - by Phuong Nguyen

  Recently, due to some messy stuff with master boot record, I have to re-install my Ubuntu. Before doing that, I back up all folder (exclude root, bin, sbin, tmp, media, mnt) to a NTFS partition. After installation of Ubuntu, I copied back all the folder using a nautilus (running by sudo nautilus). After that, I reboot my computer. And boom, now I cannot run sudo any more, my network services cannot run. When I run sudo from a terminal, I ge "must be setuid root" error. In ubuntu, root account is disabled by default, I don't know why all these files is no longer under ownership of my account. How would I recover back?

  Read the article

• What sources do spammers use to get email addresses?

  - by Andrew Grimm

  From what sources do email spammers get their addresses? Wikipedia mentions the following: Harvesting email addresses from publicly available sources. This includes web pages (web crawling), usenet posts, mailing list archives, DNS and WHOIS records Guessing email addresses (directory harvest attack) Asking people for their emails for one purpose, such as jokes of the day, and selling the email addresses elsewhere Getting access to people's address books (which Quechup utilized) Scanning an infected computer for email addresses. Are there any other techniques used? Are any of the techniques above now obsolete?

  Read the article

• Videoediting slow on windows with HD footage in fileformat .MOV

  - by Joakim

  Hi, My camera a Canon 5D mark II serves me .mov files in HD - but these are a pain in the neck to edit on my pc. I have tried Premier, Vegas, Pinnacle etc - but it is almost impossible to edit and do a movie. I do have a good computer with windows7 but that doesnt help me, and I dont want to buy a new monster pc just for that task. Question: I could manage to convert the files, but what would be the best format? I dont want to loose to much quality. Anyone have any ideas? Best regards, Joakim

  Read the article

• Apple Magic Mouse scrolling in Ubuntu 9.10

  - by krig

  Just received new Apple Magic Mouse and tried to install it on my computer with Ubuntu 9.10. Mouse was found as Bluetooth mouse, I entered PIN as 0000 (could not find it in user manual, so just googgled it). Now I have 2 buttons working well - left and right, but scrolling does not work. I understand that there is no driver for Magic Mouse for linux, but maybe some enthusiasts already found way to enable scrolling. Without scrolling with only 2 buttons this mouse is just like my first mouse I bought in 1997, Mitsumi as I can remember =)

  Read the article

• /usr/lib/cups/backend/hp has failed

  - by edtechdev

  Ever since 10.04, I can't print to an HP laserjet p3005. I'm even using an entirely different computer now with a fresh install of 10.10. I've tried with and without the latest hplip. Recently, sometimes I can get it to print a few things, but eventually it always fails (usually when printing a pdf from the document viewer (also doesn't work with adobe pdf reader)). Sometimes it fails so bad the printer gives an error saying it needs to be turned off and on again. I can't seem to find a fix anywhere, I've googled all over the past year and tried every fix I could find. It does say that the /usr/lib/cups/backend/hp has failed. It also doesn't make a difference if I create the printer using hp-setup or ubuntu's own printing control panel. I delete and re-create the printer, no difference eventually. I use the default printer settings or custom settings, no difference. I can print perfectly find to a networked printer at home - an HP officejet 6310. It seems to be networked HP printers at work that I can't print to anymore (except occasionally right after re-installing the printer driver). What's the recommended way to install HP printer drivers and reset or clean out everything from before. Or where are the right logs to read or debug commands to do to find out what may be the real cause of the printing problems?

  Read the article

• Can't add a network printer - Windows 7

  - by r0ca

  Hi all, I have an HP 2600n installed on a SBS2003 server. This printer works fine when I print from the server itself and also from my Windows 7 computer #1. From my Windows 7 #2, it doesn't work. I get the error message that I need to install the driver. The error message is in french but here it the translation. No drivers has been found Windows is unable to find a driver for HP Color Laserjet 2600n on the network. To find a driver manually, click ok. If not, click on cancel and contact your sys adm. I reinstalled from scratch the printer, deleted the driver... Still no luck Any takers?

  Read the article

• Inverted function keys (F1-F12) on HP Pavilion dv4t

  - by The Electric Muffin

  (I know there have already been a lot of questions about this, but none of them mentioned the dv4t specifically.) I'm thinking about getting an HP Pavilion dv4t-4200 or -5100, but something that's really irritating me is that by default the function keys (F1-F12) are "inverted"—without holding the Fn key, the function keys do things like change the brightness, change or mute the volume, and switch to an external display. Only if you hold Fn will they actually produce F1, F2, etc. This is not how keyboards are supposed to work. Is there any way to disable this "feature" that has been verified to work on the HP Pavilion dv4t-4200 or HP Pavilion dv4t-5100? I don't want to buy this computer unless this is possible.

  Read the article

• HP Pavilion dv6000 graphics issue

  - by Tony

  A few days ago my laptop seized up on me while I was playing a game. When I restarted the computer, it sent me back to 640x480 resolution with 16 colors (clearly a graphical issue). In device manager, it shows an error, stating "Windows has stopped this device because it has reported problems. (Code 43)" regarding the video card. Upon removing and re-installing the drivers using both Windows Update and my own searching through nvidia's site, it's given me zero results. For kicks, I ran my antivirus (you never know!) and registry cleaner to see if anything would turn up. The antivirus found nothing, but CCleaner found 27 registry errors all dealing with my video card. What could be the cause of this, and what course of action would you recommend in this situation? Thanks in advance for the help! OS: Windows 7 Professional GPU: nvidia GeForce 8400M GS

  Read the article

• Centos livecd of current installation

  - by mplacona

  I'm trying to create a liveCD of my current Centos installation. i want it to be almost like a backup, so whenever I want to copy my current installation to another computer I would simply install from my custom liveCD. I know this is possible, and found some resources in the nets, but they all seem to only create a minimal version of CENTOS, and I'm wanting to have all the current functionalities available to me at present, including all of my development functionalities, Apache and samba settings, etc. I have done (on Debian though) it a few years ago, but can't remember how. could anyone please shed me a light on this? Thanks in advance

  Read the article

• Error Message: Primary Slave Drive - ATAPI Incompatible

  - by Jaleel Dwight

  So I recently switched towers and now, all of a sudden, I'm getting this error message as soon as I boot my system. The error message reads "Primary Slave Drive - ATAPI Incompatible". This has really been frustrating since there's NO Primary Slave Drive even installed in my computer!! I have one hard drive installed which is recognized as the Primary Master & a DVD Drive which is recognized as the Secondary Master. My old system ran flawlessly. I'm beginning to think maybe my motherboard is bugging out cuz I fail to understand how it can be telling me that a "nonexistent" drive is incompatible. Any suggestions??

  Read the article

• Backup to Synology NAS using rsync or NFS and hardlinks

  - by danilo

  I want to backup data from a Windows (Vista) computer to a Synology NAS (210j). The NAS supports FTP, SMB, NFS and also allows a rsync daemon to be set up. I want to backup different folders to the NAS, but I'd prefer to use the hardlink method to save diskspace (like this script does). With this method, a new folder is created for every backup, but if the file already exists on the target, only a hardlink is created. The filesystem on the Synology device is ext3, so I probably can't use rsyncbackup, as it is made for NTFS. Is there another way to do this backup with hardlink support?

  Read the article

• Apache port forwarding with ZTE ZXV10 W300 router (provider specific firmware)

  - by dannote

  I'm trying to configure port forwarding for Apache 2.2 installed on Windows XP SP3 with ZTE ZXV10 W300 router. The computer has a static IP 192.168.1.2. Port forwarding is configured as following: Enable true Name Apache Protocol TCP (also tried TCP and UPD) WAN Host Start IP Address empty WAN Host End IP Address empty WAN Connection stream WAN Start Port 8080 WAN End Port 8080 LAN Host IP Address 192.168.1.2 LAN Host Start Port 8080 LAN Host End Port 8080 Port 8080 is open for both TCP and UPD in Windows Brandmauer. Apache configuration: Listen 192.168.1.2:8080 Router Firmware: Hardware Version V1.0.01 Software Version V8.0.02T03_CFA Boot Loader Version V1.1.2 The provider is COMSTAR. I'm not sure but it's said they flash routers with modified firmware. I have also tried to set up Bitcomet port forwarding on port 13514 and failed.

  Read the article

• Repeated Reporting Services Login issue when deploying through BIDS to a remote server

  - by Richard Edwards

  We are having a problem deploying a reporting services report to a sql reporting services computer that is configured in SharePoint Integrated mode. I can successfully deploy to the SharePoint document libraries set up for reports and data connections if I do it locally from the box that SharePoint and Reporting Services are deployed on. If I try and do the same thing with the exact same deployment properties from a remote box, I constantly get a Reporting Services Login dialog popping up and no combination of domain\username and password will work. I've even tried the machines local admin account and still nothing. Any ideas where to start looking?

  Read the article

• How to become a Kernel/Systems/Device driver programmer?

  - by accordionfolder

  Hello all! I currently work in a professional capacity as a software engineer working with the Android OS. We work at integrating our platform as a native daemon among other facets of the project. I primarily work in Java developing the SDK and Android applications, but get to help with the platform in C/C++. Anywho, I have a great interest to work professionally developing low level for linux. I am not unhappy in my current position and will hang around as long as the company lets me (as a matter of fact I quite enjoy working there!), but I would like to work my way that direction. I've been working through Linux Kernel Development (Robert Love) and The Linux Programming Interface (Michael Kerrisk) (In addition to strengthening my C skills at every chance I get) and casually browsing Monster and similar sites. The problem I see is, there are no entry level positions. How does one break into this field? Anytime I see "Linux Systems Programmer" or "Linux Device Driver Programmer" they all require at the minimum 5-7 years of relevant experience. They want someone who knows the ropes, not a junior level programmer (I've been working for 7 months now...). So, I'm assuming, that some of you on stackoverflow work in a professional capacity doing just what I would like to do. How did you get there? What platforms did you use to work your way there? Am I going to have a more difficult time because I have my bachelors in CSC as opposed to a computer engineer (where they would experience a bit more embedded, asm, etc)?

  Read the article

• Make sent items appear in Outlook 2010 conversation without exchange

  - by Gabriel Guimarães

  Hi I just installed outlook 2010, and saw this conversation feature. However my sent mails does not appear in the conversation. How do I make it appear there? PS: I'm not using exchange. Is there a way to do this without exchange? EDIT: There's something Weird happening. I'm testing this and it appears to work only sometimes. And When I Try this at the other company's computer that uses Exchange, but don't have exchange Cached mode enabled this doesn't work. And the option Show messages from other folders is not even there.

  Read the article

• claws-mail suddenly does not recognize my .claws-mail folder

  - by Mala

  Hi I turned my computer on today like any other day, and fired up my email-client claws-mail. However, instead of showing me my inbox, it just pops up the new-account wizard, as though my .claws-mail folder did not exist! I've double-checked that it's there, and that it (seems to) contain everything that it should. I tried running claws-mail from the terminal to see if it returned any useful messages about why it couldn't find my email account, but no dice... For reference, this is CM version 3.7.2 running on Gentoo kernel 2.6.31-gentoo-r6 (x86_64) Any clues as to how to get my beloved inbox/config back? Thanks!

  Read the article

• Problem closing MDI child window in Terminal Services/Remote Desktop Connection 7.0

  - by Justin Love

  I have one user whose computer just got updated to the 7.0 Remote Desktop Connection. Concurrently, she has started having a problem closing the MDI child windows in an old FoxPro application running on the remote server. We have two different servers, both 2003, running the same application, one locally and one at a remote office. Only the remote office server is giving trouble. It works fine for me, even when logging into her TS account. No other users have complained. The other day the same user experienced an error message (path not found for a path showing a localization placeholder) starting the RDC, fixed by reboot. I suspect she may have had RDC running during the 7.0 upgrade.

  Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >