Search Results

Search found 30764 results on 1231 pages for 'copy control'.

Page 406/1231 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

• Sneak Peek at Canada's New Copyright Bill

  <b>The Tyee:</b> "Digital locks will make it hard to copy your CDs and DVDs. And what about snooping Internet providers?"

  Read the article

• Using the JRockit Flight Recorder as an In-Flight Black Box

  - by Marcus Hirt

  The new JRockit Flight Recorder has some very interesting properties. It can be used like the black box of an airplane, allowing users to go back in time and check what was happening around the time when something went wrong. Here is how to enable the default continuous recording in JRockit to allow for that use case. The flight recorder is on by default in JRockit R28, the problem is that there is no recording running by default. To configure JRockit to start with the default recording running, add the parameter: -XX:FlightRecorderOptions=defaultrecording=true That will enable a recording with recording ID 0. You can see that it has been started properly by choosing Show Recordings from the context menu in JRockit Mission Control.   You should see something similar to the picture below. Simply right click on the recording and select dump to dump information available in the flight recorder. You can select to dump data for a specific period of time or all data. For more information about the command line parameters available to control the Flight Recorder, see the JRockit documentation.

  Read the article

• FREE eBook: .NET Performance Testing and Optimization (Part 1)

  In this this first part of complete guide to performance profiling, Paul Glavich and Chris Farrell explain why performance testing is a good idea and walk you through everything you need to know to set up a test environment. This comprehensive guide to getting started is an essential handbook to any programmer looking to set up a .NET testing environment and get the best results out of it. Download your free copy now span.fullpost {display:none;}

  Read the article

• A standard style guide or best-practice guide for web application development

  - by gutch

  I run a very small team of developers on a web application, just three people (and not even full time). We're all capable developers, but we write our code in very different ways: we name similar things in different ways, we use different HTML and CSS to achieve similar outcomes. We can manage this OK because we're small, but can't help feeling it would be better to get some standards in place. Are there any good style guides or best-practice guides for web application development that we can use to keep our code under control? Sure, we could write them ourselves. But the reality is that with lots to do and very few staff, we're not going to bother. We need something off the shelf that we can tinker with rather than start from scratch. What we're not looking for here is basic code formatting rules like "whether to use tabs or spaces" or "where to put line breaks" — we can control this by standardising our IDEs. What we are looking for are rules for code and markup. For example: What HTML markup should be used for headers, tables, sidebars, buttons, etc. When to add new CSS styles, and what to name them When IDs should be allocated to HTML elements, and what to name them How Javascript functions should be declared and called How to pick an appropriate URL for given page or AJAX call When to use each HTTP method, ie POST vs GET vs PUT etc How to name server-side methods (Java, in our case) How to throw and handle errors and exceptions in a consistent way etc, etc.

  Read the article

• CodePlex Daily Summary for Wednesday, October 03, 2012

  CodePlex Daily Summary for Wednesday, October 03, 2012Popular ReleasesSharePoint Column & View Permission: SharePoint Column and View Permission v1.5: Version 1.5 of this project. If you will find any bugs please let me know at enti@zoznam.sk or post your findings in Issue TrackerZ3: Z3 4.1.1 source code: Snapshot corresponding to version 4.1.1.DirectX Tool Kit: October 2012: October 2, 2012 Added ScreenGrab module Added CreateGeoSphere for drawing a geodesic sphere Put DDSTextureLoader and WICTextureLoader into the DirectX C++ namespace Renamed project files for better naming consistency Updated WICTextureLoader for Windows 8 96bpp floating-point formats Win32 desktop projects updated to use Windows Vista (0x0600) rather than Windows 7 (0x0601) APIs Tweaked SpriteBatch.cpp to workaround ARM NEON compiler codegen bugHome Access Plus+: v8.1: HAP+ Web v8.1.1003.000079318 Fixed: Issue with the Help Desk and updating a ticket as an admin 79319 Fixed: formatting issue with the booking system admin header 79321 Moved to using the arrow with a circle symbol on the homepage instead of the > and < 79541 Added: 480px wide mobile theme to login page 79541 Added: 480px wide mobile theme to home page 79541 Added: slide events for homepage 79553 Fixed: Booking System Multiple Lesson Bug 79553 Fixed: IE Error Message 79684 Fixed: jQuery issue ...System.Net.FtpClient: System.Net.FtpClient 2012.10.02: This is the first release of the new code base. It is not compatible with the old API, I repeat it is not a drop in update for projects currently using System.Net.FtpClient. New users should download this release. The old code base (Branch: System.Net.FtpClient_1) will continue to be supported while the new code matures. This release is a complete re-write of System.Net.FtpClient. The API and code are simpler than ever before. There are some new features included as well as an attempt at be...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1002.3): Visual Ribbon Editor 1.3.1002.3 What's New: Multi-language support for Labels/Tooltips for custom buttons and groups Support for base language other than English (1033) Connect dialog will not require organization name for ADFS / IFD connections Automatic creation of missing labels for all provisioned languages Minor connection issues fixed Notes: Before saving the ribbon to CRM server, editor will check Ribbon XML for any missing <Title> elements inside existing <LocLabel> elements...YAXLib: Yet Another XML Serialization Library for the .NET Framework: YAXLib 2.10: See change-log for the list of new features added and bugs fixedRenameApp: RenameApp 1.0: First release of RenameAppJsonToStaticTypeGenerator: JsonToStaticTypeGenerator 0.1: This is the first alpha release of JsonToStaticTypeGenerator.XiaoKyun: XiaoKyun V1.00: https://xiaokyun.codeplex.com/CatchThatException: Release 1.12: Wow a very fast change and a much better and faster writing to the text fileNaked Objects: Naked Objects Release 5.0.0: Corresponds to the packaged version 5.0.0 available via NuGet. Please note that the easiest way to install and run the Naked Objects Framework is via the NuGet package manager: just search the Official NuGet Package Source for 'nakedobjects'. It is only necessary to download the source code (from here) if you wish to modify or re-build the framework yourself. If you do wish to re-build the framework, consul the file HowToBuild.txt in the release. Major enhancementsNaked Objects 5.0 is desi...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.0: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...D3 Loot Tracker: 1.4.1: This version will automatically save a recording session on application exit if the user didn't stop the current session.SubExtractor: Release 1029: Feature: Added option to make i and ¡ characters movie-specific for improved OCR on Spanish subs (Special Characters tab in Options) Feature: Allow switch to Word Spacing dialog directly from Spell Check dialog Fix: Added more default word spacings for accented characters Fix: Changed Word Spacing dialog to show all OCR'd characters in current sub Fix: Removed application focus grab during OCR Fix: Tightened HD subs fuzzy logic to reduce false matches in small characters Fix: Improved Arrow k...MCEBuddy 2.x: MCEBuddy 2.2.18: Reccomended download Changelog for 2.2.18 (32bit and 64bit) 1. Added support for checking if Showanalyzer has hung and cancelling it 2. New version of comskip, 0.81.48 3. Speeding up comskip 4. Fixed a build bug in 64bit 2.2.17 5. Added a new comkip.ini, better commercial detection for international channels and less aggressive. Old one has been retained as comskip_old.ini 6. Added support for Audio Offset on Conversion Task page in GUI (this overrides the profiles AudioDelay when specified)Readable Passphrase Generator: KeePass Plugin 0.7.1: See the KeePass Plugin Step By Step Guide for instructions on how to install the plugin. Changes Built against KeePass 2.20Windows 8 Toolkit - Charts and More: Beta 1.0: The First Compiled Version of my LibraryPDF.NET: PDF.NET.Ver4.5-OpenSourceCode: PDF.NET Ver4.5 ????，????Web??????。 PDF.NET Ver4.5 Open Source Code,include a sample Web application project.Visual Studio Icon Patcher: Version 1.5.2: This version contains no new images from v1.5.1 Contains the following improvements: Better support for detecting the installed languages The extract & inject commands won’t run if Visual Studio is running You may now run in extract or inject mode The p/invoke code was cleaned up based on Code Analysis recommendations When a p/invoke method fails the Win32 error message is now displayed Error messages use red text Status messages use green textNew Projects.Net Exception Reporter: A reusable and extensible exception reporter for Microsoft .NET projects.Aesha Broker: A rich client Auction House Broker application. Built upon Blizzard's new REST API. Provides a client experience which caches historical auction data to provideASP.NET Friendly URLs: A library that enables automatic resolving of extensionless URLs to ASP.NET file-based handlers, e.g. ASPX pages.Astro Power CMS: Astro Power CMS build on GraffitiCMS, a product of Telligent. GraffitiCMS stop develop, I create this project with name is Astro Power CMSaTester: Here is a good place. And now, I can upload my soruce to it. It's very good.Automacao Residencial: O Netduino é uma plataforma onde voce utiliza a linguagem C# para controlar hardware. O objetivo é criar uma estrutura de comunicaçao com o netduino.Derbster: Explore and learn about modern C# architecture and programming by implementing software to support the modern game of roller derby. Dot FPE - A free Format-preserving encryption implementation for .net: There aren't any widely available implementations of a format-preserving encryption in .NET. Thus we aim to be the first!DotNetEx: .NET Framework extended functionality for data access, working with Tasks and asynchronous programming, encryption algorithms such as SkipJack and other stuff.Elemental Development Toolchain (.NET version): A complete toolchain built around the Æthere langauge.elFinder ASP.NET Connector: The one and only .NET connector for the amazing elFinder 2.X web-based file manager. Finally you can manage your files easily right from your browser!Geosynkronisering: Prosjekt for utarbeidelse av spesifikasjoner for grensesnitt som muliggjør synkronisering av datalager med geografisk datainnhold på tvers av ulike plattformerGIII_P1: Jesli wszyscy w Ciebie zwatpili pokaz ze sie mylili !IntroduceCompany: Website gi?i thi?u doanh nghi?p - công ty.JsonToStaticTypeGenerator: This is the JsonToStaticTypeGenerator project that gives the possibility to generate c# classes out of Json data.kwerty: Coming soonMachine Learning: My machine learning project. Just to figure out things...MicroManager: MaNGOS Web-based ManagerMvcContrib3: This is the version of mvccontrib which works with ASP.Net MVC 3Oracle Destination via ODP.Net (Custom Destination Component): SSIS 2008 R2 solution (custom destination component) to write to oracle via ODP.NetOrchard Commerce History with PayPal: Project expands on Nwazet.Commerce module (and is required for this module to work). Adds a purchase history, product role associations, and PayPal.Phoenix Trans: Web Phoenix Trans v?n t?i hàng hóa trong và ngoài nu?cPowerState: PowerState is .NET application for sending Wake-On-LAN (WOL) requests to computers. It can also shutdown, log off and reboot computers using the WMI.RenameApp: RenameApp is a free and very simple to use renaming software for Windows. RenameApp allows you to easily rename files based on the specified criteria and order.Rose-Hulman User Experience Design: This project will contain labs intended for use in Rose-Hulman's Computer Science and Software Engineering department.Server d? phòng: Ðây là server d? phòng, SharePoint BCS External Connector Caching Pattern Library: Library for enabling caching on SharePoint BCS external connectors. Enables BCS .Net Assemblies to be written that are scalable and performant for search.SharpDX.WPF: This projects provides a DirectX 9, DirectX 10 and DirectX 11 support for WPF. The assembly contains DXElement - an easy to use WPF-FrameworkElement.Simple Password Generator Library: The password generator library, written in C#, is a simple assembly which allow generation of passwords with length anywhere from 1-99.SisEagle.NET: Esse sistema foi desenvolvido pra fins de apresentação do TCC referente ao ano de 2012 na UDF-BrasiliaSWebshop: SWebshop is a PHP based webshop system which allows you to insert, edit and delete data easily and is easy to use for customers.Tabular Database Powershell Cmdlets: This project provides a sample of PowerShell Cmdlets to manage Tabular models, from Analysis Services.University timetable using java: the project is using java language to create timetable (full timetable with exam tables and labs tables) and it will be free for all users with sql databaseURLShoter: This project for shorting URL for ASP.NETWeb Input Form Control: This control allow developer to create the input form by configuring the control in html modeWeibo: rtWorkoutMemo: Project descritpion(first draft): Memorise your workout. Keep archive records of your daily trening such: - series of excercise, - quantity of each serie, - weWPF - Automate Acrobat Security Policy: This WPF Tool was created to quickly password protect batches of PDF documents, using a random generator to generate the passwords.XiaoKyun: Hello Page for Web.Z3: Z3 is a high-performance theorem prover being developed at Microsoft Research.

  Read the article

• EXALYTICS - Unable to run Summary Advisor when BI Admin Client Tool is installed separately

  - by Ahmed Awan

  Unable to launch Summary Advisor when BI Admin Developer Client tool (version 11.1.1.6.0) is separately installed. In Windows Event application log, the error is pointing to missing AggrAdvisor.xml file. The file AggrAdvisor.xml is missing in BI client install location. Workaround: Download file AggrAdvisor.xml and copy to following location will resolve this issue: <your drive>:\Program Files\Oracle Business Intelligence Enterprise Edition Plus Client\oraclebi\orahome\bifoundation\server\locale\l_en\

  Read the article

• SQL SERVER – Import CSV into Database – Transferring File Content into a Database Table using CSVexpress

  - by pinaldave

  One of the most common data integration tasks I run into is a desire to move data from a file into a database table.  Generally the user is familiar with his data, the structure of the file, and the database table, but is unfamiliar with data integration tools and therefore views this task as something that is difficult.  What these users really need is a point and click approach that minimizes the learning curve for the data integration tool.  This is what CSVexpress (www.CSVexpress.com) is all about!  It is based on expressor Studio, a data integration tool I’ve been reviewing over the last several months. With CSVexpress, moving data between data sources can be as simple as providing the database connection details, describing the structure of the incoming and outgoing data and then connecting two pre-programmed operators.   There’s no need to learn the intricacies of the data integration tool or to write code.  Let’s look at an example. Suppose I have a comma separated value data file with data similar to the following, which is a listing of terminated employees that includes their hiring and termination date, department, job description, and final salary. EMP_ID,STRT_DATE,END_DATE,JOB_ID,DEPT_ID,SALARY 102,13-JAN-93,24-JUL-98 17:00,Programmer,60,"$85,000" 101,21-SEP-89,27-OCT-93 17:00,Account Representative,110,"$65,000" 103,28-OCT-93,15-MAR-97 17:00,Account Manager,110,"$75,000" 304,17-FEB-96,19-DEC-99 17:00,Marketing,20,"$45,000" 333,24-MAR-98,31-DEC-99 17:00,Data Entry Clerk,50,"$35,000" 100,17-SEP-87,17-JUN-93 17:00,Administrative Assistant,90,"$40,000" 334,24-MAR-98,31-DEC-98 17:00,Sales Representative,80,"$40,000" 400,01-JAN-99,31-DEC-99 17:00,Sales Manager,80,"$55,000" Notice the concise format used for the date values, the fact that the termination date includes both date and time information, and that the salary is clearly identified as money by the dollar sign and digit grouping.  In moving this data to a database table I want to express the dates using a format that includes the century since it’s obvious that this listing could include employees who left the company in both the 20th and 21st centuries, and I want the salary to be stored as a decimal value without the currency symbol and grouping character.  Most data integration tools would require coding within a transformation operation to effect these changes, but not expressor Studio.  Directives for these modifications are included in the description of the incoming data. Besides starting the expressor Studio tool and opening a project, the first step is to create connection artifacts, which describe to expressor where data is stored.  For this example, two connection artifacts are required: a file connection, which encapsulates the file system location of my file; and a database connection, which encapsulates the database connection information.  With expressor Studio, I use wizards to create these artifacts. First click New Connection > File Connection in the Home tab of expressor Studio’s ribbon bar, which starts the File Connection wizard.  In the first window, I enter the path to the directory that contains the input file.  Note that the file connection artifact only specifies the file system location, not the name of the file. Then I click Next and enter a meaningful name for this connection artifact; clicking Finish closes the wizard and saves the artifact. To create the Database Connection artifact, I must know the location of, or instance name, of the target database and have the credentials of an account with sufficient privileges to write to the target table.  To use expressor Studio’s features to the fullest, this account should also have the authority to create a table. I click the New Connection > Database Connection in the Home tab of expressor Studio’s ribbon bar, which starts the Database Connection wizard.  expressor Studio includes high-performance drivers for many relational database management systems, so I can simply make a selection from the “Supplied database drivers” drop down control.  If my desired RDBMS isn’t listed, I can optionally use an existing ODBC DSN by selecting the “Existing DSN” radio button. In the following window, I enter the connection details.  With Microsoft SQL Server, I may choose to use Windows Authentication rather than rather than account credentials.  After clicking Next, I enter a meaningful name for this connection artifact and clicking Finish closes the wizard and saves the artifact. Now I create a schema artifact, which describes the structure of the file data.  When expressor reads a file, all data fields are typed as strings.  In some use cases this may be exactly what is needed and there is no need to edit the schema artifact.  But in this example, editing the schema artifact will be used to specify how the data should be transformed; that is, reformat the dates to include century designations, change the employee and job ID’s to integers, and convert the salary to a decimal value. Again a wizard is used to create the schema artifact.  I click New Schema > Delimited Schema in the Home tab of expressor Studio’s ribbon bar, which starts the Database Connection wizard.  In the first window, I click Get Data from File, which then displays a listing of the file connections in the project.  When I click on the file connection I previously created, a browse window opens to this file system location; I then select the file and click Open, which imports 10 lines from the file into the wizard. I now view the file’s content and confirm that the appropriate delimiter characters are selected in the “Field Delimiter” and “Record Delimiter” drop down controls; then I click Next. Since the input file includes a header row, I can easily indicate that fields in the file should be identified through the corresponding header value by clicking “Set All Names from Selected Row. “ Alternatively, I could enter a different identifier into the Field Details > Name text box.  I click Next and enter a meaningful name for this schema artifact; clicking Finish closes the wizard and saves the artifact. Now I open the schema artifact in the schema editor.  When I first view the schema’s content, I note that the types of all attributes in the Semantic Type (the right-hand panel) are strings and that the attribute names are the same as the field names in the data file.  To change an attribute’s name and type, I highlight the attribute and click Edit in the Attributes grouping on the Schema > Edit tab of the editor’s ribbon bar.  This opens the Edit Attribute window; I can change the attribute name and select the desired type from the “Data type” drop down control.  In this example, I change the name of each attribute to the name of the corresponding database table column (EmployeeID, StartingDate, TerminationDate, JobDescription, DepartmentID, and FinalSalary).  Then for the EmployeeID and DepartmentID attributes, I select Integer as the data type, for the StartingDate and TerminationDate attributes, I select Datetime as the data type, and for the FinalSalary attribute, I select the Decimal type. But I can do much more in the schema editor.  For the datetime attributes, I can set a constraint that ensures that the data adheres to some predetermined specifications; a starting date must be later than January 1, 1980 (the date on which the company began operations) and a termination date must be earlier than 11:59 PM on December 31, 1999.  I simply select the appropriate constraint and enter the value (1980-01-01 00:00 as the starting date and 1999-12-31 11:59 as the termination date). As a last step in setting up these datetime conversions, I edit the mapping, describing the format of each datetime type in the source file. I highlight the mapping line for the StartingDate attribute and click Edit Mapping in the Mappings grouping on the Schema > Edit tab of the editor’s ribbon bar.  This opens the Edit Mapping window in which I either enter, or select, a format that describes how the datetime values are represented in the file.  Note the use of Y01 as the syntax for the year.  This syntax is the indicator to expressor Studio to derive the century by setting any year later than 01 to the 20th century and any year before 01 to the 21st century.  As each datetime value is read from the file, the year values are transformed into century and year values. For the TerminationDate attribute, my format also indicates that the datetime value includes hours and minutes. And now to the Salary attribute. I open its mapping and in the Edit Mapping window select the Currency tab and the “Use currency” check box.  This indicates that the file data will include the dollar sign (or in Europe the Pound or Euro sign), which should be removed. And on the Grouping tab, I select the “Use grouping” checkbox and enter 3 into the “Group size” text box, a comma into the “Grouping character” text box, and a decimal point into the “Decimal separator” character text box. These entries allow the string to be properly converted into a decimal value. By making these entries into the schema that describes my input file, I’ve specified how I want the data transformed prior to writing to the database table and completely removed the requirement for coding within the data integration application itself. Assembling the data integration application is simple.  Onto the canvas I drag the Read File and Write Table operators, connecting the output of the Read File operator to the input of the Write Table operator. Next, I select the Read File operator and its Properties panel opens on the right-hand side of expressor Studio.  For each property, I can select an appropriate entry from the corresponding drop down control.  Clicking on the button to the right of the “File name” text box opens the file system location specified in the file connection artifact, allowing me to select the appropriate input file.  I indicate also that the first row in the file, the header row, should be skipped, and that any record that fails one of the datetime constraints should be skipped. I then select the Write Table operator and in its Properties panel specify the database connection, normal for the “Mode,” and the “Truncate” and “Create Missing Table” options.  If my target table does not yet exist, expressor will create the table using the information encapsulated in the schema artifact assigned to the operator. The last task needed to complete the application is to create the schema artifact used by the Write Table operator.  This is extremely easy as another wizard is capable of using the schema artifact assigned to the Read Table operator to create a schema artifact for the Write Table operator.  In the Write Table Properties panel, I click the drop down control to the right of the “Schema” property and select “New Table Schema from Upstream Output…” from the drop down menu. The wizard first displays the table description and in its second screen asks me to select the database connection artifact that specifies the RDBMS in which the target table will exist.  The wizard then connects to the RDBMS and retrieves a list of database schemas from which I make a selection.  The fourth screen gives me the opportunity to fine tune the table’s description.  In this example, I set the width of the JobDescription column to a maximum of 40 characters and select money as the type of the LastSalary column.  I also provide the name for the table. This completes development of the application.  The entire application was created through the use of wizards and the required data transformations specified through simple constraints and specifications rather than through coding.  To develop this application, I only needed a basic understanding of expressor Studio, a level of expertise that can be gained by working through a few introductory tutorials.  expressor Studio is as close to a point and click data integration tool as one could want and I urge you to try this product if you have a need to move data between files or from files to database tables. Check out CSVexpress in more detail.  It offers a few basic video tutorials and a preview of expressor Studio 3.5, which will support the reading and writing of data into Salesforce.com. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Accessing Server-Side Data from Client Script: Accessing JSON Data From an ASP.NET Page Using jQuery

  When building a web application, we must decide how and when the browser will communicate with the web server. The ASP.NET WebForms model greatly simplifies web development by providing a straightforward mechanism for exchanging data between the browser and the server. With WebForms, each ASP.NET page's rendered output includes a <form> element that performs a postback to the same page whenever a Button control within the form is clicked, or whenever the user modifies a control whose AutoPostBack property is set to True. On postback, the server sends the entire contents of the web page back to the browser, which then displays this new content. With WebForms we don't need to spend much time or effort thinking about how or when the browser will communicate with the server or how that returned information will be processed by the browser. It just works. While this approach certainly works and has its advantages, it's not without its drawbacks. The primary concern with postback forms is that they require a large amount of information to be exchanged between the browser and the server. Specifically, the browser sends back all of its form fields (including hidden ones, like view state, which may be quite large) and then the server sends back the entire contents of the web page. Granted, there are scenarios where this large quantity of data needs to be exchanged, but in many cases we can use techniques that exchange much less information. However, these techniques necessitate spending more time and effort thinking about how and when to have the browser communicate with the server and intelligently deciding on what information needs to be exchanged. This article, the first in a multi-part series, examines different techniques for accessing server-side data from a browser using client-side script. Throughout this series we will explore alternative ways to expose data on the server so that it can be accessed from the browser using script; we will also examine various tools for communicating with the server from JavaScript, including jQuery and the ASP.NET AJAX library. Read on to learn more! Read More >

  Read the article

• Using Dependency Walker

  - by Valter Minute

  Dependency Walker is a very useful tool that can be used to find dependencies of a Portable Executable module. The PE format is used also on Windows CE and this means that Dependency Walker can be used to analyze also Windows CE/Windows Embedded Compact module. On Win32 it can be used also to monitor modules loaded by an application during runtime, this feature is not supported on CE. You can download dependency walker for free here: http://dependencywalker.com/. To analyze the dependencies of a Windows CE/Windows Embedded Compact 7 module you can just open it using Dependency Walker. If you want to check if a specific module can run on a Windows CE/Windows Compact 7 OS Image you can copy the executable in the same directory that contains your OS binaries (FLATRELEASEDIR). In this way Dependency Walker will highlight missing dlls or missing entry points inside existing dlls. Let’s do a quick sample. You need to check if myapp.exe (an application from a third party) can run on an image generated with your Test01 OSDesign. Copy Myapp.exe to the flat release directory of your OS Design. Launch depends.exe and use the File\Open option of its main menu to open the application executable file you just copied. You may receive an error if some of the modules required by your applications are missing. Before you analyze the module dependencies is important to configure Dependency Walker to check DLL in the same folder where your application file is stored. This is needed because some Windows CE DLLs have the same name of Win32 system DLLs but different entry points. To configure the DLL search path select “Options\Configure Module Search Order…” from Depenency Walker main menu. Select “The application directory” from the “Current Search Order” list, select it, and move it to the top of the list using the “Move Up” button. The system will ask to refresh the window contents to reflect your configuration change, click on “Yes” to proceed. Now you can inspect myapp.exe dependencies. Some DLLs are missing (XAMLRUNTIME.DLL and TILEENGINE.DLL) and OLE32.DLL exists but does not export the “CoInitialize” entry point that is required by myapp.exe. The bad news is that MyApp.exe will not run on your OS Image, the good news is that now you know what’s missing and you can add the required modules to your OS Design and fix the problem!

  Read the article

• WinXP How to Tunnel LPT over USB

  - by Michael Pruitt

  I have a windows program that accesses a device connected to a LPT (1-3) 25 pin port. The communication is bidirectional, and I suspected the control lines are also accessed directly. I would like to migrate the device to a machine that does not have a LPT port. I saw the dos2usb software, but that takes the output (from a DOS program) and 'prints' it formatted for a specific printer. I need a raw LPT connection, and a cable that provides access to all the control signals. I do have a USB to 36-pin Centronics that may have the extra signals. I use it with a vinyl cutter that doesn't like most of the USB dongles. It comes up as USB001. Would adding and sharing a generic printer, then mapping LPT1 to the share get me closer? Would that work for a parallel port scanner? My preferred solution is a USB cable with a driver that will map it to LPT1, LPT2, or LPT3.

  Read the article

• When do I use Apache Kafka, Azure Service Bus, vs Azure Queues?

  - by makerofthings7

  I'm trying to understand the situations I'd use Apache Kafka, Azure Service Bus, or Azure Queues for high scale message processing. Which is better for standard Pub Sub situations? Where multiple clients get a copy of the same message? Which is better for low latency Pub sub and no durability? Which is better for "cooperating producer" and "competing consumer"? (what does this mean?) I see a bit of overlap in function between Kafka, Service Bus, Azure Queues

  Read the article

• Apress Deal of the Day - 10/Mar/2011 - Beginning Microsoft Word 2010

  - by TATWORTH

  Today's $10 deal at http://www.apress.com/info/dailydeal is Beginning Microsoft Word 2010 This has been on before, I bought a copy and have found it useful. Beginning Microsoft Word 2010 Beginning Word 2010 is a visually stimulating introductory guide that teaches the complete Word newbie (as well as slightly experienced yet equally baffled users) what they need to know to write that thesis or proposal tonight.

  Read the article

• apache2 force proxy for specific url on a subdomain

  - by Tony G.

  Hi, I have a site that has dynamic virtual subdomains using mod_rewrite, as defined like this: <VirtualHost *:80> ServerName example.com ServerAlias *.example.com DocumentRoot /var/www/example.com/www RewriteEngine on RewriteCond %{HTTP_HOST} ^[^.]+\.examle.com$ RewriteRule ^(.+) %{HTTP_HOST}$1 [C] RewriteRule ^([^.]+)\.example.com(.*) /var/www/example.com/$1$2 </VirtualHost> The problem is that I want a specific url, say subdomain.example.com/CONTROL/ to point back to www.example.com/ using a proxy (not url redirecting). I have tried adding: RewriteRule ^([^.]+)\.example.com/CONTROL(.*) /var/www/example.com/www$2 [P] But that didn't work. Any ideas?

  Read the article

• OpenVPN on ec2 bridged mode connects but no Ping, DNS or forwarding

  - by michael

  I am trying to use OpenVPN to access the internet over a secure connection. I have openVPN configured and running on Amazon EC2 in bridge mode with client certs. I can successfully connect from the client, but I cannot get access to the internet or ping anything from the client I checked the following and everything seems to shows a successful connection between the vpn client/server and UDP traffic on 1194 [server] sudo tcpdump -i eth0 udp port 1194 (shows UDP traffic after establishing connection) [server] sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] sudo iptables -L -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- ip-W-X-Y-0.us-west-1.compute.internal/24 anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] openvpn.log Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 [localhost] Inactivity timeout (--ping-restart), restarting Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 SIGUSR1[soft,ping-restart] received, client-instance restarting Wed Oct 19 03:41:31 2011 MULTI: multi_create_instance called Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Re-using SSL/TLS context Wed Oct 19 03:41:31 2011 a.b.c.d:57889 LZO compression initialized Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Control Channel MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Local Options hash (VER=V4): '360696c5' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Expected Remote Options hash (VER=V4): '13a273ba' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 TLS: Initial packet from [AF_INET]a.b.c.d:57889, sid=dd886604 ab6ebb38 Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=EXAMPLE_CA/[email protected] Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=localhost/[email protected] Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Oct 19 03:41:37 2011 a.b.c.d:57889 [localhost] Peer Connection Initiated with [AF_INET]a.b.c.d:57889 Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 PUSH: Received control message: 'PUSH_REQUEST' Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 SENT CONTROL [localhost]: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,route-gateway W.X.Y.Z,ping 10,ping-restart 120,ifconfig W.X.Y.Z 255.255.255.0' (status=1) Wed Oct 19 03:41:40 2011 localhost/a.b.c.d:57889 MULTI: Learn: (IPV6) -> localhost/a.b.c.d:57889 [client] tracert google.com Tracing route to google.com [74.125.71.104] over a maximum of 30 hops: 1 347 ms 349 ms 348 ms PC [w.X.Y.Z] 2 * * * Request timed out. I can also successfully ping the server IP address from the client, and ping google.com from an SSH shell on the server. What am I doing wrong? Here is my config (Note: W.X.Y.Z == amazon EC2 private ipaddress) bridge config on br0 ifconfig eth0 0.0.0.0 promisc up brctl addbr br0 brctl addif br0 eth0 ifconfig br0 W.X.Y.X netmask 255.255.255.0 broadcast W.X.Y.255 up route add default gw W.X.Y.1 br0 /etc/openvpn/server.conf (from https://help.ubuntu.com/10.04/serverguide/C/openvpn.html) local W.X.Y.Z dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;server W.X.Y.0 255.255.255.0 server-bridge W.X.Y.Z 255.255.255.0 W.X.Y.105 W.X.Y.200 ;push "route W.X.Y.0 255.255.255.0" push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" tls-auth ta.key 0 # This file is secret user nobody group nogroup log-append openvpn.log iptables config sudo iptables -A INPUT -i tap0 -j ACCEPT sudo iptables -A INPUT -i br0 -j ACCEPT sudo iptables -A FORWARD -i br0 -j ACCEPT sudo iptables -t nat -A POSTROUTING -s W.X.Y.0/24 -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward Routing Tables added route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface W.X.Y.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 W.X.Y.1 0.0.0.0 UG 0 0 0 br0 C:>route print =========================================================================== Interface List 32...00 ff ac d6 f7 04 ......TAP-Win32 Adapter V9 15...00 14 d1 e9 57 49 ......Microsoft Virtual WiFi Miniport Adapter #2 14...00 14 d1 e9 57 49 ......Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Net work Adapter 10...00 1f d0 50 1b ca ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 17...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 18...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 36...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.2.1 10.1.2.201 25 10.1.2.0 255.255.255.0 On-link 10.1.2.201 281 10.1.2.201 255.255.255.255 On-link 10.1.2.201 281 10.1.2.255 255.255.255.255 On-link 10.1.2.201 281 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.1.2.201 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.1.2.201 281 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.1.2.1 Default =========================================================================== C:>tracert google.com Tracing route to google.com [74.125.71.147] over a maximum of 30 hops: 1 344 ms 345 ms 343 ms PC [W.X.Y.221] 2 * * * Request timed out.

  Read the article

• Commit in SQL

  - by PRajkumar

  SQL Transaction Control Language Commands (TCL)                                           (COMMIT) Commit Transaction As a SQL language we use transaction control language very frequently. Committing a transaction means making permanent the changes performed by the SQL statements within the transaction. A transaction is a sequence of SQL statements that Oracle Database treats as a single unit. This statement also erases all save points in the transaction and releases transaction locks. Oracle Database issues an implicit COMMIT before and after any data definition language (DDL) statement. Oracle recommends that you explicitly end every transaction in your application programs with a COMMIT or ROLLBACK statement, including the last transaction, before disconnecting from Oracle Database. If you do not explicitly commit the transaction and the program terminates abnormally, then the last uncommitted transaction is automatically rolled back.   Until you commit a transaction: ·         You can see any changes you have made during the transaction by querying the modified tables, but other users cannot see the changes. After you commit the transaction, the changes are visible to other users' statements that execute after the commit ·         You can roll back (undo) any changes made during the transaction with the ROLLBACK statement   Note: Most of the people think that when we type commit data or changes of what you have made has been written to data files, but this is wrong when you type commit it means that you are saying that your job has been completed and respective verification will be done by oracle engine that means it checks whether your transaction achieved consistency when it finds ok it sends a commit message to the user from log buffer but not from data buffer, so after writing data in log buffer it insists data buffer to write data in to data files, this is how it works.   Before a transaction that modifies data is committed, the following has occurred: ·         Oracle has generated undo information. The undo information contains the old data values changed by the SQL statements of the transaction ·         Oracle has generated redo log entries in the redo log buffer of the System Global Area (SGA). The redo log record contains the change to the data block and the change to the rollback block. These changes may go to disk before a transaction is committed ·         The changes have been made to the database buffers of the SGA. These changes may go to disk before a transaction is committed   Note:   The data changes for a committed transaction, stored in the database buffers of the SGA, are not necessarily written immediately to the data files by the database writer (DBWn) background process. This writing takes place when it is most efficient for the database to do so. It can happen before the transaction commits or, alternatively, it can happen some times after the transaction commits.   When a transaction is committed, the following occurs: 1.      The internal transaction table for the associated undo table space records that the transaction has committed, and the corresponding unique system change number (SCN) of the transaction is assigned and recorded in the table 2.      The log writer process (LGWR) writes redo log entries in the SGA's redo log buffers to the redo log file. It also writes the transaction's SCN to the redo log file. This atomic event constitutes the commit of the transaction 3.      Oracle releases locks held on rows and tables 4.      Oracle marks the transaction complete   Note:   The default behavior is for LGWR to write redo to the online redo log files synchronously and for transactions to wait for the redo to go to disk before returning a commit to the user. However, for lower transaction commit latency application developers can specify that redo be written asynchronously and that transaction do not need to wait for the redo to be on disk.   The syntax of Commit Statement is   COMMIT [WORK] [COMMENT ‘your comment’]; ·         WORK is optional. The WORK keyword is supported for compliance with standard SQL. The statements COMMIT and COMMIT WORK are equivalent. Examples Committing an Insert INSERT INTO table_name VALUES (val1, val2); COMMIT WORK; ·         COMMENT Comment is also optional. This clause is supported for backward compatibility. Oracle recommends that you used named transactions instead of commit comments. Specify a comment to be associated with the current transaction. The 'text' is a quoted literal of up to 255 bytes that Oracle Database stores in the data dictionary view DBA_2PC_PENDING along with the transaction ID if a distributed transaction becomes in doubt. This comment can help you diagnose the failure of a distributed transaction. Examples The following statement commits the current transaction and associates a comment with it: COMMIT     COMMENT 'In-doubt transaction Code 36, Call (415) 555-2637'; ·         WRITE Clause Use this clause to specify the priority with which the redo information generated by the commit operation is written to the redo log. This clause can improve performance by reducing latency, thus eliminating the wait for an I/O to the redo log. Use this clause to improve response time in environments with stringent response time requirements where the following conditions apply: The volume of update transactions is large, requiring that the redo log be written to disk frequently. The application can tolerate the loss of an asynchronously committed transaction. The latency contributed by waiting for the redo log write to occur contributes significantly to overall response time. You can specify the WAIT | NOWAIT and IMMEDIATE | BATCH clauses in any order. Examples To commit the same insert operation and instruct the database to buffer the change to the redo log, without initiating disk I/O, use the following COMMIT statement: COMMIT WRITE BATCH; Note: If you omit this clause, then the behavior of the commit operation is controlled by the COMMIT_WRITE initialization parameter, if it has been set. The default value of the parameter is the same as the default for this clause. Therefore, if the parameter has not been set and you omit this clause, then commit records are written to disk before control is returned to the user. WAIT | NOWAIT Use these clauses to specify when control returns to the user. The WAIT parameter ensures that the commit will return only after the corresponding redo is persistent in the online redo log. Whether in BATCH or IMMEDIATE mode, when the client receives a successful return from this COMMIT statement, the transaction has been committed to durable media. A crash occurring after a successful write to the log can prevent the success message from returning to the client. In this case the client cannot tell whether or not the transaction committed. The NOWAIT parameter causes the commit to return to the client whether or not the write to the redo log has completed. This behavior can increase transaction throughput. With the WAIT parameter, if the commit message is received, then you can be sure that no data has been lost. Caution: With NOWAIT, a crash occurring after the commit message is received, but before the redo log record(s) are written, can falsely indicate to a transaction that its changes are persistent. If you omit this clause, then the transaction commits with the WAIT behavior. IMMEDIATE | BATCH Use these clauses to specify when the redo is written to the log. The IMMEDIATE parameter causes the log writer process (LGWR) to write the transaction's redo information to the log. This operation option forces a disk I/O, so it can reduce transaction throughput. The BATCH parameter causes the redo to be buffered to the redo log, along with other concurrently executing transactions. When sufficient redo information is collected, a disk write of the redo log is initiated. This behavior is called "group commit", as redo for multiple transactions is written to the log in a single I/O operation. If you omit this clause, then the transaction commits with the IMMEDIATE behavior. ·         FORCE Clause Use this clause to manually commit an in-doubt distributed transaction or a corrupt transaction. ·         In a distributed database system, the FORCE string [, integer] clause lets you manually commit an in-doubt distributed transaction. The transaction is identified by the 'string' containing its local or global transaction ID. To find the IDs of such transactions, query the data dictionary view DBA_2PC_PENDING. You can use integer to specifically assign the transaction a system change number (SCN). If you omit integer, then the transaction is committed using the current SCN. ·         The FORCE CORRUPT_XID 'string' clause lets you manually commit a single corrupt transaction, where string is the ID of the corrupt transaction. Query the V$CORRUPT_XID_LIST data dictionary view to find the transaction IDs of corrupt transactions. You must have DBA privileges to view the V$CORRUPT_XID_LIST and to specify this clause. ·         Specify FORCE CORRUPT_XID_ALL to manually commit all corrupt transactions. You must have DBA privileges to specify this clause. Examples Forcing an in doubt transaction. Example The following statement manually commits a hypothetical in-doubt distributed transaction. Query the V$CORRUPT_XID_LIST data dictionary view to find the transaction IDs of corrupt transactions. You must have DBA privileges to view the V$CORRUPT_XID_LIST and to issue this statement. COMMIT FORCE '22.57.53';

  Read the article

• How do I setup an FTP server on Windows 7?

  - by Matt Frear

  I'm having trouble getting an FTP server setup on Windows 7. I've added the service using Control Panel - Programs - Turn Windows features on and off. I can see the service has started in Control Panel - Services. But then when I fire up a Windows command-line window, cmd, I get Not connected., C:\Users\mattf>ftp localhost ftp> ls Not connected. ftp> open localhost ftp> ls Not connected. ftp> dir Not connected. ftp> quit C:\Users\mattf> And that's as far as I've got. I have no idea why this isn't working - could it be firewall settings?

  Read the article

• Java EE 6 and NoSQL/MongoDB on GlassFish using JPA and EclipseLink 2.4 (TOTD #175)

  - by arungupta

  TOTD #166 explained how to use MongoDB in your Java EE 6 applications. The code in that tip used the APIs exposed by the MongoDB Java driver and so requires you to learn a new API. However if you are building Java EE 6 applications then you are already familiar with Java Persistence API (JPA). Eclipse Link 2.4, scheduled to release as part of Eclipse Juno, provides support for NoSQL databases by mapping a JPA entity to a document. Their wiki provides complete explanation of how the mapping is done. This Tip Of The Day (TOTD) will show how you can leverage that support in your Java EE 6 applications deployed on GlassFish 3.1.2. Before we dig into the code, here are the key concepts ... A POJO is mapped to a NoSQL data source using @NoSQL or <no-sql> element in "persistence.xml". A subset of JPQL and Criteria query are supported, based upon the underlying data store Connection properties are defined in "persistence.xml" Now, lets lets take a look at the code ... Download the latest EclipseLink 2.4 Nightly Bundle. There is a Installer, Source, and Bundle - make sure to download the Bundle link (20120410) and unzip. Download GlassFish 3.1.2 zip and unzip. Install the Eclipse Link 2.4 JARs in GlassFish Remove the following JARs from "glassfish/modules": org.eclipse.persistence.antlr.jar org.eclipse.persistence.asm.jar org.eclipse.persistence.core.jar org.eclipse.persistence.jpa.jar org.eclipse.persistence.jpa.modelgen.jar org.eclipse.persistence.moxy.jar org.eclipse.persistence.oracle.jar Add the following JARs from Eclipse Link 2.4 nightly build to "glassfish/modules": org.eclipse.persistence.antlr_3.2.0.v201107111232.jar org.eclipse.persistence.asm_3.3.1.v201107111215.jar org.eclipse.persistence.core.jpql_2.4.0.v20120407-r11132.jar org.eclipse.persistence.core_2.4.0.v20120407-r11132.jar org.eclipse.persistence.jpa.jpql_2.0.0.v20120407-r11132.jar org.eclipse.persistence.jpa.modelgen_2.4.0.v20120407-r11132.jar org.eclipse.persistence.jpa_2.4.0.v20120407-r11132.jar org.eclipse.persistence.moxy_2.4.0.v20120407-r11132.jar org.eclipse.persistence.nosql_2.4.0.v20120407-r11132.jar org.eclipse.persistence.oracle_2.4.0.v20120407-r11132.jar Start MongoDB Download latest MongoDB from here (2.0.4 as of this writing). Create the default data directory for MongoDB as: sudo mkdir -p /data/db/sudo chown `id -u` /data/db Refer to Quickstart for more details. Start MongoDB as: arungup-mac:mongodb-osx-x86_64-2.0.4 <arungup> ->./bin/mongod./bin/mongod --help for help and startup optionsMon Apr  9 12:56:02 [initandlisten] MongoDB starting : pid=3124 port=27017 dbpath=/data/db/ 64-bit host=arungup-mac.localMon Apr  9 12:56:02 [initandlisten] db version v2.0.4, pdfile version 4.5Mon Apr  9 12:56:02 [initandlisten] git version: 329f3c47fe8136c03392c8f0e548506cb21f8ebfMon Apr  9 12:56:02 [initandlisten] build info: Darwin erh2.10gen.cc 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 i386 BOOST_LIB_VERSION=1_40Mon Apr  9 12:56:02 [initandlisten] options: {}Mon Apr  9 12:56:02 [initandlisten] journal dir=/data/db/journalMon Apr  9 12:56:02 [initandlisten] recover : no journal files present, no recovery neededMon Apr  9 12:56:02 [websvr] admin web console waiting for connections on port 28017Mon Apr  9 12:56:02 [initandlisten] waiting for connections on port 27017 Check out the JPA/NoSQL sample from SVN repository. The complete source code built in this TOTD can be downloaded here. Create Java EE 6 web app Create a Java EE 6 Maven web app as: mvn archetype:generate -DarchetypeGroupId=org.codehaus.mojo.archetypes -DarchetypeArtifactId=webapp-javaee6 -DgroupId=model -DartifactId=javaee-nosql -DarchetypeVersion=1.5 -DinteractiveMode=false Copy the model files from the checked out workspace to the generated project as: cd javaee-nosqlcp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/model src/main/java Copy "persistence.xml" mkdir src/main/resources cp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/META-INF ./src/main/resources Add the following dependencies: <dependency> <groupId>org.eclipse.persistence</groupId> <artifactId>org.eclipse.persistence.jpa</artifactId> <version>2.4.0-SNAPSHOT</version> <scope>provided</scope></dependency><dependency> <groupId>org.eclipse.persistence</groupId> <artifactId>org.eclipse.persistence.nosql</artifactId> <version>2.4.0-SNAPSHOT</version></dependency><dependency> <groupId>org.mongodb</groupId> <artifactId>mongo-java-driver</artifactId> <version>2.7.3</version></dependency> The first one is for the EclipseLink latest APIs, the second one is for EclipseLink/NoSQL support, and the last one is the MongoDB Java driver. And the following repository: <repositories> <repository> <id>EclipseLink Repo</id> <url>http://www.eclipse.org/downloads/download.php?r=1&amp;nf=1&amp;file=/rt/eclipselink/maven.repo</url> <snapshots> <enabled>true</enabled> </snapshots> </repository>  </repositories> Copy the "Test.java" to the generated project: mkdir src/main/java/examplecp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/example/Test.java ./src/main/java/example/ This file contains the source code to CRUD the JPA entity to MongoDB. This sample is explained in detail on EclipseLink wiki. Create a new Servlet in "example" directory as: package example;import java.io.IOException;import java.io.PrintWriter;import javax.servlet.ServletException;import javax.servlet.annotation.WebServlet;import javax.servlet.http.HttpServlet;import javax.servlet.http.HttpServletRequest;import javax.servlet.http.HttpServletResponse;/** * @author Arun Gupta */@WebServlet(name = "TestServlet", urlPatterns = {"/TestServlet"})public class TestServlet extends HttpServlet { protected void processRequest(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { response.setContentType("text/html;charset=UTF-8"); PrintWriter out = response.getWriter(); try { out.println("<html>"); out.println("<head>"); out.println("<title>Servlet TestServlet</title>"); out.println("</head>"); out.println("<body>"); out.println("<h1>Servlet TestServlet at " + request.getContextPath() + "</h1>"); try { Test.main(null); } catch (Exception ex) { ex.printStackTrace(); } out.println("</body>"); out.println("</html>"); } finally { out.close(); } } @Override protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { processRequest(request, response); } @Override protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { processRequest(request, response); }} Build the project and deploy it as: mvn clean packageglassfish3/bin/asadmin deploy --force=true target/javaee-nosql-1.0-SNAPSHOT.war Accessing http://localhost:8080/javaee-nosql/TestServlet shows the following messages in the server.log: connecting(EISLogin( platform=> MongoPlatform user name=> "" MongoConnectionSpec())) . . .Connected: User: Database: 2.7  Version: 2.7 . . .Executing MappedInteraction() spec => null properties => {mongo.collection=CUSTOMER, mongo.operation=INSERT} input => [DatabaseRecord( CUSTOMER._id => 4F848E2BDA0670307E2A8FA4 CUSTOMER.NAME => AMCE)]. . .Data access result: [{TOTALCOST=757.0, ORDERLINES=[{DESCRIPTION=table, LINENUMBER=1, COST=300.0}, {DESCRIPTION=balls, LINENUMBER=2, COST=5.0}, {DESCRIPTION=rackets, LINENUMBER=3, COST=15.0}, {DESCRIPTION=net, LINENUMBER=4, COST=2.0}, {DESCRIPTION=shipping, LINENUMBER=5, COST=80.0}, {DESCRIPTION=handling, LINENUMBER=6, COST=55.0},{DESCRIPTION=tax, LINENUMBER=7, COST=300.0}], SHIPPINGADDRESS=[{POSTALCODE=L5J1H7, PROVINCE=ON, COUNTRY=Canada, CITY=Ottawa,STREET=17 Jane St.}], VERSION=2, _id=4F848E2BDA0670307E2A8FA8,DESCRIPTION=Pingpong table, CUSTOMER__id=4F848E2BDA0670307E2A8FA7, BILLINGADDRESS=[{POSTALCODE=L5J1H8, PROVINCE=ON, COUNTRY=Canada, CITY=Ottawa, STREET=7 Bank St.}]}] You'll not see any output in the browser, just the output in the console. But the code can be easily modified to do so. Once again, the complete Maven project can be downloaded here. Do you want to try accessing relational and non-relational (aka NoSQL) databases in the same PU ?

  Read the article

• No icons in top panel notification area

  - by PeterOakland

  (writing here because my reply to a previous post is marked "deleted by diago") Ubuntu 9.10 Karmic I have tried removing the notification area from the top panel and reinstalling it, and still I have nothing in it: no volume control, no connection icon. I have put a notification area on the bottom panel, and the only icon appearing is the connection one, looks like two plugs meeting, or a large resistor in line, or two toilet plungers face to face, so to speak. How can I get this up top where it used to be, along with the volume control icon? Thanks for any help.

  Read the article

• Change environment variables as standard user (Windows 7)

  - by SealedSun

  When clicking on "Advanced system settings", I need to login as the administrator and hence only edit the administrators environment variables (in addition to the machine wide ones). How do I edit the environment variables of a standard user? Details With the migration to Windows 7, I decided to work as a standard user instead of an unprivileged administrator. Works well so far but I encountered a tiny problem: When I try to change per user environment variables via the control panel I have to login as an administrator. But since I run that part of the control panel as the administrator I can only edit the administrators variables. How am I supposed to edit my own environment variables? Without resorting to extreme measures, such as editing the registry (as suggested in "Is there any command line tool that can be used to edit environment variables in Windows?" )

  Read the article

• hosting people asking for my account username and password to enable curl and socket function only for me

  - by Jayapal Chandran

  I have hosted my site in a shared environment. My hosting people disabled socket function all together. and they said that we can enable only for you if i given a written statement. I did but they asked for my control panel login details so they will run some kind of script to enable it. Is it right for the hosting company to ask for credentials. They have the total control so why cant they do it? Edit: Before six months many websites in their server got hacked. So they think it would be because of socket functions and had disabled it. They say they can enable it for specific users who do programming using that and that is by email request.

  Read the article

• SOA Governance Starts with People and Processes

  - by Jyothi Swaroop

  While we all agree that SOA Governance is about People, Processes and Technology. Some experts are of the opinion that SOA Governance begins with People and Processes but needs to be empowered with technology to achieve the best results. Here's an interesting piece from David Linthicum on eBizq: In the world of SOA, the concept of SOA governance is getting a lot of attention. However, how SOA governance is defined and implemented really depends on the SOA governance vendor who just left the building within most enterprises. Indeed, confusion is a huge issue when considering SOA governance, and the core issues are more about the fundamentals of people and processes, and not about the technology. SOA governance is a concept used for activities related to exercising control over services in an SOA, including tracking the services, monitoring the service, and controlling changes made to the services, simple put. The trouble comes in when SOA governance vendors attempt to define SOA governance around their technology, all with different approaches to SOA governance. Thus, it's important that those building SOAs within the enterprise take a step back and understand what really need to support the concept of SOA governance. The value of SOA governance is pretty simple. Since services make up the foundation of an SOA, and are at their essence the behavior and information from existing systems externalized, it's critical to make sure that those accessing, creating, and changing services do so using a well controlled and orderly mechanism. Those of you, who already have governance in place, typically around enterprise architecture efforts, will be happy to know that SOA governance does not replace those processes, but becomes a mechanism within the larger enterprise governance concept. People and processes are first thing on the list to get under control before you begin to toss technology at this problem. This means establishing an understanding of SOA governance within the team members, including why it's important, who's involved, and the core processes that are to be follow to make SOA governance work. Indeed, when creating the core SOA governance strategy should really be independent of the technology. The technology will change over the years, but the core processes and discipline should be relatively durable over time.

  Read the article

• Nginx location issue

  - by dave

  I'm trying to set a longer (30 day) 'expires' header for my (images only) in the /misc-stuff/ directory. This is what I'm using for my site : # Serve static files directly from nginx location ~* \.(jpg|jpeg|gif|png|bmp|ico|pdf|flv|swf|exe|html|htm|txt|css|js) { add_header Cache-Control public; add_header Cache-Control must-revalidate; expires 7d; } I want to be able to keep that code in to handle regular site images, but create a new block to handle the /misc-stuff/ directory. I have tried : location ^~ /misc-stuff/ { ... } The problem I'm having now is that my backup .php files in that directory show up as plain text if someone tries to access it. How do I set it up so ONLY .gif images in the /misc-stuff/ directory are effected?

  Read the article

• Exploring the Excel Services REST API

  - by jamiet

  Over the last few years Analysis Services guru Chris Webb and I have been on something of a crusade to enable better access to data that is locked up in countless Excel workbooks that litter the hard drives of enterprise PCs. The most prominent manifestation of that crusade up to now has been a forum thread that Chris began on Microsoft Answers entitled Excel Web App API? Chris began that thread with: I was wondering whether there was an API for the Excel Web App? Specifically, I was wondering if it was possible (or if it will be possible in the future) to expose data in a spreadsheet in the Excel Web App as an OData feed, in the way that it is possible with Excel Services? Up to recently the last 10 words of that paragraph "in the way that it is possible with Excel Services" had completely washed over me however a comment on my recent blog post Thoughts on ExcelMashup.com (and a rant) by Josh Booker in which Josh said: Excel Services is a service application built for sharepoint 2010 which exposes a REST API for excel documents. We're looking forward to pros like you giving it a try now that Office365 makes sharepoint more easily accessible.  Can't wait for your future blog about using REST API to load data from Excel on Offce 365 in SSIS. made me think that perhaps the Excel Services REST API is something I should be looking into and indeed that is what I have been doing over the past few days. And you know what? I'm rather impressed with some of what Excel Services' REST API has to offer. Unfortunately Excel Services' REST API also has one debilitating aspect that renders this blog post much less useful than it otherwise would be; namely that it is not publicly available from the Excel Web App on SkyDrive. Therefore all I can do in this blog post is show you screenshots of what the REST API provides in Sharepoint rather than linking you directly to those REST resources; that's a great shame because one of the benefits of a REST API is that it is easily and ubiquitously demonstrable from a web browser. Instead I am hosting a workbook on Sharepoint in Office 365 because that does include Excel Services' REST API but, again, all I can do is show you screenshots. N.B. If anyone out there knows how to make Office-365-hosted spreadsheets publicly-accessible (i.e. without requiring a username/password) please do let me know (because knowing which forum on which to ask the question is an exercise in futility). In order to demonstrate Excel Services' REST API I needed some decent data and for that I used the World Tourism Organization Statistics Database and Yearbook - United Nations World Tourism Organization dataset hosted on Azure Datamarket (its free, by the way); this dataset "provides comprehensive information on international tourism worldwide and offers a selection of the latest available statistics on international tourist arrivals, tourism receipts and expenditure" and you can explore the data for yourself here. If you want to play along at home by viewing the data as it exists in Excel then it can be viewed here. Let's dive in.   The root of Excel Services' REST API is the model resource which resides at: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model Note that this is true for every workbook hosted in a Sharepoint document library - each Excel workbook is a RESTful resource. (Update: Mark Stacey on Twitter tells me that "It's turned off by default in onpremise Sharepoint (1 tickbox to turn on though)". Thanks Mark!) The data is provided as an ATOM feed but I have Firefox's feed reading ability turned on so you don't see the underlying XML goo. As you can see there are four top level resources, Ranges, Charts, Tables and PivotTables; exploring one of those resources is where things get interesting. Let's take a look at the Tables Resource: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables Our workbook contains only one table, called ‘Table1’ (to reiterate, you can explore this table yourself here). Viewing that table via the REST API is pretty easy, we simply append the name of the table onto our previous URI: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables('Table1') As you can see, that quite simply gives us a representation of the data in that table. What you cannot see from this screenshot is that this is pure HTML that is being served up; that is all well and good but actually we can do more interesting things. If we specify that the data should be returned not as HTML but as: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables('Table1')?$format=image then that data comes back as a pure image and can be used in any web page where you would ordinarily use images. This is the thing that I really like about Excel Services’ REST API – we can embed an image in any web page but instead of being a copy of the data, that image is actually live – if the underlying data in the workbook were to change then hitting refresh will show a new image. Pretty cool, no? The same is true of any Charts or Pivot Tables in your workbook - those can be embedded as images too and if the underlying data changes, boom, the image in your web page changes too. There is a lot of data in the workbook so the image returned by that previous URI is too large to show here so instead let’s take a look at a different resource, this time a range: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Ranges('Data!A1|C15') That URI returns cells A1 to C15 from a worksheet called “Data”: And if we ask for that as an image again: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Ranges('Data!A1|C15')?$format=image Were this image resource not behind a username/password then this would be a live image of the data in the workbook as opposed to one that I had to copy and upload elsewhere. Nonetheless I hope this little wrinkle doesn't detract from the inate value of what I am trying to articulate here; that an existing image in a web page can be changed on-the-fly simply by inserting some data into an Excel workbook. I for one think that that is very cool indeed! I think that's enough in the way of demo for now as this shows what is possible using Excel Services' REST API. Of course, not all features work quite how I would like and here is a bulleted list of some of my more negative feedback: The URIs are pig-ugly. Are "_vti_bin" & "ExcelRest.aspx" really necessary as part of the URI? Would this not be better: http://server/Documents/TourismExpenditureInMillionsOfUSD.xlsx/Model/Tables(‘Table1’) That URI provides the necessary addressability and is a lot easier to remember. Discoverability of these resources is not easy, we essentially have to handcrank a URI ourselves. Take the example of embedding a chart into a blog post - would it not be better if I could browse first through the document library to an Excel workbook and THEN through the workbook to the chart/range/table that I am interested in? Call it a wizard if you like. That would be really cool and would, I am sure, promote this feature and cut down on the copy-and-paste disease that the REST API is meant to alleviate. The resources that I demonstrated can be returned as feeds as well as images or HTML simply by changing the format parameter to ?$format=atom however for some inexplicable reason they don't return OData and no-one on the Excel Services team can tell me why (believe me, I have asked). $format is an OData parameter however other useful parameters such as $top and $filter are not supported. It would be nice if they were. Although I haven't demonstrated it here Excel Services' REST API does provide a makeshift way of altering the data by changing the value of specific cells however what it does not allow you to do is add new data into the workbook. Google Docs allows this and was one of the motivating factors for Chris Webb's forum post that I linked to above. None of this works for Excel workbooks hosted on SkyDrive This blog post is as long as it needs to be for a short introduction so I'll stop now. If you want to know more than I recommend checking out a few links: Excel Services REST API documentation on MSDNSo what does REST on Excel Services look like??? by Shahar PrishExcel Services in SharePoint 2010 REST API Syntax by Christian Stich. Any thoughts? Let's hear them in the comments section below! @Jamiet 

  Read the article

• SOS, i erased a disk,1T.by mistake

  - by gabriel

  i tried to make bootable a flash drive from the startup disk creator, and i wanted to copy an iso of the 11.10 ubuntu, and when i tried to erase the flash drive i pressed erase on another removable drive 1T storage by mistake, VVVery very very quickly less than one second and with no warning everything was erased i suppose.Is that thing possible?When i tried before theis to erase the flash drive it took around a minute to erase the 8GB.But now less than a second for 1T? Please help, Gabriel

  Read the article

• ANTS Memory Profiler 7.0 Review

  - by Michael B. McLaughlin

  (This is my first review as a part of the GeeksWithBlogs.net Influencers program. It’s a program in which I (and the others who have been selected for it) get the opportunity to check out new products and services and write reviews about them. We don’t get paid for this, but we do generally get to keep a copy of the software or retain an account for some period of time on the service that we review. In this case I received a copy of Red Gate Software’s ANTS Memory Profiler 7.0, which was released in January. I don’t have any upgrade rights nor is my review guided, restrained, influenced, or otherwise controlled by Red Gate or anyone else. But I do get to keep the software license. I will always be clear about what I received whenever I do a review – I leave it up to you to decide whether you believe I can be objective. I believe I can be. If I used something and really didn’t like it, keeping a copy of it wouldn’t be worth anything to me. In that case though, I would simply uninstall/deactivate/whatever the software or service and tell the company what I didn’t like about it so they could (hopefully) make it better in the future. I don’t think it’d be polite to write up a terrible review, nor do I think it would be a particularly good use of my time. There are people who get paid for a living to review things, so I leave it to them to tell you what they think is bad and why. I’ll only spend my time telling you about things I think are good.) Overview of Common .NET Memory Problems When coming to land of managed memory from the wilds of unmanaged code, it’s easy to say to one’s self, “Wow! Now I never have to worry about memory problems again!” But this simply isn’t true. Managed code environments, such as .NET, make many, many things easier. You will never have to worry about memory corruption due to a bad pointer, for example (unless you’re working with unsafe code, of course). But managed code has its own set of memory concerns. For example, failing to unsubscribe from events when you are done with them leaves the publisher of an event with a reference to the subscriber. If you eliminate all your own references to the subscriber, then that memory is effectively lost since the GC won’t delete it because of the publishing object’s reference. When the publishing object itself becomes subject to garbage collection then you’ll get that memory back finally, but that could take a very long time depending of the life of the publisher. Another common source of resource leaks is failing to properly release unmanaged resources. When writing a class that contains members that hold unmanaged resources (e.g. any of the Stream-derived classes, IsolatedStorageFile, most classes ending in “Reader” or “Writer”), you should always implement IDisposable, making sure to use a properly written Dispose method. And when you are using an instance of a class that implements IDisposable, you should always make sure to use a 'using' statement in order to ensure that the object’s unmanaged resources are disposed of properly. (A ‘using’ statement is a nicer, cleaner looking, and easier to use version of a try-finally block. The compiler actually translates it as though it were a try-finally block. Note that Code Analysis warning 2202 (CA2202) will often be triggered by nested using blocks. A properly written dispose method ensures that it only runs once such that calling dispose multiple times should not be a problem. Nonetheless, CA2202 exists and if you want to avoid triggering it then you should write your code such that only the innermost IDisposable object uses a ‘using’ statement, with any outer code making use of appropriate try-finally blocks instead). Then, of course, there are situations where you are operating in a memory-constrained environment or else you want to limit or even eliminate allocations within a certain part of your program (e.g. within the main game loop of an XNA game) in order to avoid having the GC run. On the Xbox 360 and Windows Phone 7, for example, for every 1 MB of heap allocations you make, the GC runs; the added time of a GC collection can cause a game to drop frames or run slowly thereby making it look bad. Eliminating allocations (or else minimizing them and calling an explicit Collect at an appropriate time) is a common way of avoiding this (the other way is to simplify your heap so that the GC’s latency is low enough not to cause performance issues). ANTS Memory Profiler 7.0 When the opportunity to review Red Gate’s recently released ANTS Memory Profiler 7.0 arose, I jumped at it. In order to review it, I was given a free copy (which does not include upgrade rights for future versions) which I am allowed to keep. For those of you who are familiar with ANTS Memory Profiler, you can find a list of new features and enhancements here. If you are an experienced .NET developer who is familiar with .NET memory management issues, ANTS Memory Profiler is great. More importantly still, if you are new to .NET development or you have no experience or limited experience with memory profiling, ANTS Memory Profiler is awesome. From the very beginning, it guides you through the process of memory profiling. If you’re experienced and just want dive in however, it doesn’t get in your way. The help items GAHSFLASHDAJLDJA are well designed and located right next to the UI controls so that they are easy to find without being intrusive. When you first launch it, it presents you with a “Getting Started” screen that contains links to “Memory profiling video tutorials”, “Strategies for memory profiling”, and the “ANTS Memory Profiler forum”. I’m normally the kind of person who looks at a screen like that only to find the “Don’t show this again” checkbox. Since I was doing a review, though, I decided I should examine them. I was pleasantly surprised. The overview video clocks in at three minutes and fifty seconds. It begins by showing you how to get started profiling an application. It explains that profiling is done by taking memory snapshots periodically while your program is running and then comparing them. ANTS Memory Profiler (I’m just going to call it “ANTS MP” from here) analyzes these snapshots in the background while your application is running. It briefly mentions a new feature in Version 7, a new API that give you the ability to trigger snapshots from within your application’s source code (more about this below). You can also, and this is the more common way you would do it, take a memory snapshot at any time from within the ANTS MP window by clicking the “Take Memory Snapshot” button in the upper right corner. The overview video goes on to demonstrate a basic profiling session on an application that pulls information from a database and displays it. It shows how to switch which snapshots you are comparing, explains the different sections of the Summary view and what they are showing, and proceeds to show you how to investigate memory problems using the “Instance Categorizer” to track the path from an object (or set of objects) to the GC’s root in order to find what things along the path are holding a reference to it/them. For a set of objects, you can then click on it and get the “Instance List” view. This displays all of the individual objects (including their individual sizes, values, etc.) of that type which share the same path to the GC root. You can then click on one of the objects to generate an “Instance Retention Graph” view. This lets you track directly up to see the reference chain for that individual object. In the overview video, it turned out that there was an event handler which was holding on to a reference, thereby keeping a large number of strings that should have been freed in memory. Lastly the video shows the “Class List” view, which lets you dig in deeply to find problems that might not have been clear when following the previous workflow. Once you have at least one memory snapshot you can begin analyzing. The main interface is in the “Analysis” tab. You can also switch to the “Session Overview” tab, which gives you several bar charts highlighting basic memory data about the snapshots you’ve taken. If you hover over the individual bars (and the individual colors in bars that have more than one), you will see a detailed text description of what the bar is representing visually. The Session Overview is good for a quick summary of memory usage and information about the different heaps. You are going to spend most of your time in the Analysis tab, but it’s good to remember that the Session Overview is there to give you some quick feedback on basic memory usage stats. As described above in the summary of the overview video, there is a certain natural workflow to the Analysis tab. You’ll spin up your application and take some snapshots at various times such as before and after clicking a button to open a window or before and after closing a window. Taking these snapshots lets you examine what is happening with memory. You would normally expect that a lot of memory would be freed up when closing a window or exiting a document. By taking snapshots before and after performing an action like that you can see whether or not the memory is really being freed. If you already know an area that’s giving you trouble, you can run your application just like normal until just before getting to that part and then you can take a few strategic snapshots that should help you pin down the problem. Something the overview didn’t go into is how to use the “Filters” section at the bottom of ANTS MP together with the Class List view in order to narrow things down. The video tutorials page has a nice 3 minute intro video called “How to use the filters”. It’s a nice introduction and covers some of the basics. I’m going to cover a bit more because I think they’re a really neat, really helpful feature. Large programs can bring up thousands of classes. Even simple programs can instantiate far more classes than you might realize. In a basic .NET 4 WPF application for example (and when I say basic, I mean just MainWindow.xaml with a button added to it), the unfiltered Class List view will have in excess of 1000 classes (my simple test app had anywhere from 1066 to 1148 classes depending on which snapshot I was using as the “Current” snapshot). This is amazing in some ways as it shows you how in stark detail just how immensely powerful the WPF framework is. But hunting through 1100 classes isn’t productive, no matter how cool it is that there are that many classes instantiated and doing all sorts of awesome things. Let’s say you wanted to examine just the classes your application contains source code for (in my simple example, that would be the MainWindow and App). Under “Basic Filters”, click on “Classes with source” under “Show only…”. Voilà. Down from 1070 classes in the snapshot I was using as “Current” to 2 classes. If you then click on a class’s name, it will show you (to the right of the class name) two little icon buttons. Hover over them and you will see that you can click one to view the Instance Categorizer for the class and another to view the Instance List for the class. You can also show classes based on which heap they live on. If you chose both a Baseline snapshot and a Current snapshot then you can use the “Comparing snapshots” filters to show only: “New objects”; “Surviving objects”; “Survivors in growing classes”; or “Zombie objects” (if you aren’t sure what one of these means, you can click the helpful “?” in a green circle icon to bring up a popup that explains them and provides context). Remember that your selection(s) under the “Show only…” heading will still apply, so you should update those selections to make sure you are seeing the view you want. There are also links under the “What is my memory problem?” heading that can help you diagnose the problems you are seeing including one for “I don’t know which kind I have” for situations where you know generally that your application has some problems but aren’t sure what the behavior you have been seeing (OutOfMemoryExceptions, continually growing memory usage, larger memory use than expected at certain points in the program). The Basic Filters are not the only filters there are. “Filter by Object Type” gives you the ability to filter by: “Objects that are disposable”; “Objects that are/are not disposed”; “Objects that are/are not GC roots” (GC roots are things like static variables); and “Objects that implement _______”. “Objects that implement” is particularly neat. Once you check the box, you can then add one or more classes and interfaces that an object must implement in order to survive the filtering. Lastly there is “Filter by Reference”, which gives you the option to pare down the list based on whether an object is “Kept in memory exclusively by” a particular item, a class/interface, or a namespace; whether an object is “Referenced by” one or more of those choices; and whether an object is “Never referenced by” one or more of those choices. Remember that filtering is cumulative, so anything you had set in one of the filter sections still remains in effect unless and until you go back and change it. There’s quite a bit more to ANTS MP – it’s a very full featured product – but I think I touched on all of the most significant pieces. You can use it to debug: a .NET executable; an ASP.NET web application (running on IIS); an ASP.NET web application (running on Visual Studio’s built-in web development server); a Silverlight 4 browser application; a Windows service; a COM+ server; and even something called an XBAP (local XAML browser application). You can also attach to a .NET 4 process to profile an application that’s already running. The startup screen also has a large number of “Charting Options” that let you adjust which statistics ANTS MP should collect. The default selection is a good, minimal set. It’s worth your time to browse through the charting options to examine other statistics that may also help you diagnose a particular problem. The more statistics ANTS MP collects, the longer it will take to collect statistics. So just turning everything on is probably a bad idea. But the option to selectively add in additional performance counters from the extensive list could be a very helpful thing for your memory profiling as it lets you see additional data that might provide clues about a particular problem that has been bothering you. ANTS MP integrates very nicely with all versions of Visual Studio that support plugins (i.e. all of the non-Express versions). Just note that if you choose “Profile Memory” from the “ANTS” menu that it will launch profiling for whichever project you have set as the Startup project. One quick tip from my experience so far using ANTS MP: if you want to properly understand your memory usage in an application you’ve written, first create an “empty” version of the type of project you are going to profile (a WPF application, an XNA game, etc.) and do a quick profiling session on that so that you know the baseline memory usage of the framework itself. By “empty” I mean just create a new project of that type in Visual Studio then compile it and run it with profiling – don’t do anything special or add in anything (except perhaps for any external libraries you’re planning to use). The first thing I tried ANTS MP out on was a demo XNA project of an editor that I’ve been working on for quite some time that involves a custom extension to XNA’s content pipeline. The first time I ran it and saw the unmanaged memory usage I was convinced I had some horrible bug that was creating extra copies of texture data (the demo project didn’t have a lot of texture data so when I saw a lot of unmanaged memory I instantly figured I was doing something wrong). Then I thought to run an empty project through and when I saw that the amount of unmanaged memory was virtually identical, it dawned on me that the CLR itself sits in unmanaged memory and that (thankfully) there was nothing wrong with my code! Quite a relief. Earlier, when discussing the overview video, I mentioned the API that lets you take snapshots from within your application. I gave it a quick trial and it’s very easy to integrate and make use of and is a really nice addition (especially for projects where you want to know what, if any, allocations there are in a specific, complicated section of code). The only concern I had was that if I hadn’t watched the overview video I might never have known it existed. Even then it took me five minutes of hunting around Red Gate’s website before I found the “Taking snapshots from your code" article that explains what DLL you need to add as a reference and what method of what class you should call in order to take an automatic snapshot (including the helpful warning to wrap it in a try-catch block since, under certain circumstances, it can raise an exception, such as trying to call it more than 5 times in 30 seconds. The difficulty in discovering and then finding information about the automatic snapshots API was one thing I thought could use improvement. Another thing I think would make it even better would be local copies of the webpages it links to. Although I’m generally always connected to the internet, I imagine there are more than a few developers who aren’t or who are behind very restrictive firewalls. For them (and for me, too, if my internet connection happens to be down), it would be nice to have those documents installed locally or to have the option to download an additional “documentation” package that would add local copies. Another thing that I wish could be easier to manage is the Filters area. Finding and setting individual filters is very easy as is understanding what those filter do. And breaking it up into three sections (basic, by object, and by reference) makes sense. But I could easily see myself running a long profiling session and forgetting that I had set some filter a long while earlier in a different filter section and then spending quite a bit of time trying to figure out why some problem that was clearly visible in the data wasn’t showing up in, e.g. the instance list before remembering to check all the filters for that one setting that was only culling a few things from view. Some sort of indicator icon next to the filter section names that appears you have at least one filter set in that area would be a nice visual clue to remind me that “oh yeah, I told it to only show objects on the Gen 2 heap! That’s why I’m not seeing those instances of the SuperMagic class!” Something that would be nice (but that Red Gate cannot really do anything about) would be if this could be used in Windows Phone 7 development. If Microsoft and Red Gate could work together to make this happen (even if just on the WP7 emulator), that would be amazing. Especially given the memory constraints that apps and games running on mobile devices need to work within, a good memory profiler would be a phenomenally helpful tool. If anyone at Microsoft reads this, it’d be really great if you could make something like that happen. Perhaps even a (subsidized) custom version just for WP7 development. (For XNA games, of course, you can create a Windows version of the game and use ANTS MP on the Windows version in order to get a better picture of your memory situation. For Silverlight on WP7, though, there’s quite a bit of educated guess work and WeakReference creation followed by forced collections in order to find the source of a memory problem.) The only other thing I found myself wanting was a “Back” button. Between my Windows Phone 7, Zune, and other things, I’ve grown very used to having a “back stack” that lets me just navigate back to where I came from. The ANTS MP interface is surprisingly easy to use given how much it lets you do, and once you start using it for any amount of time, you learn all of the different areas such that you know where to go. And it does remember the state of the areas you were previously in, of course. So if you go to, e.g., the Instance Retention Graph from the Class List and then return back to the Class List, it will remember which class you had selected and all that other state information. Still, a “Back” button would be a welcome addition to a future release. Bottom Line ANTS Memory Profiler is not an inexpensive tool. But my time is valuable. I can easily see ANTS MP saving me enough time tracking down memory problems to justify it on a cost basis. More importantly to me, knowing what is happening memory-wise in my programs and having the confidence that my code doesn’t have any hidden time bombs in it that will cause it to OOM if I leave it running for longer than I do when I spin it up real quickly for debugging or just to see how a new feature looks and feels is a good feeling. It’s a feeling that I like having and want to continue to have. I got the current version for free in order to review it. Having done so, I’ve now added it to my must-have tools and will gladly lay out the money for the next version when it comes out. It has a 14 day free trial, so if you aren’t sure if it’s right for you or if you think it seems interesting but aren’t really sure if it’s worth shelling out the money for it, give it a try.

  Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >