Search Results

Search found 13892 results on 556 pages for 'employee info starter kit'.

Page 406/556 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

  • NetBeans IDE 7.3 Knows Null

    - by Geertjan
    What's the difference between these two methods, "test1" and "test2"? public int test1(String str) {     return str.length(); } public int test2(String str) {     if (str == null) {         System.err.println("Passed null!.");         //forgotten return;     }     return str.length(); } The difference, or at least, the difference that is relevant for this blog entry, is that whoever wrote "test2" apparently thinks that the variable "str" may be null, though did not provide a null check. In NetBeans IDE 7.3, you see this hint for "test2", but no hint for "test1", since in that case we don't know anything about the developer's intention for the variable and providing a hint in that case would flood the source code with too many false positives:  Annotations are supported in understanding how a piece of code is intended to be used. If method return types use @Nullable, @NullAllowed, @CheckForNull, the value is considered to be "strongly possible to be null", as well as if the variable is tested to be null, as shown above. When using @NotNull, @NonNull, @Nonnull, the value is considered to be non-null. (The exact FQNs of the annotations are ignored, only simple names are checked.) Here are examples showing where the hints are displayed for the non-null hints (the "strongly possible to be null" hints are not shown below, though you can see one of them in the screenshot above), together with a comment showing what is shown when you hover over the hint: There isn't a "one size fits all" refactoring for these various instances relating to null checks, hence you can't do an automated refactoring across your code base via tools in NetBeans IDE, as shown yesterday for class member reordering across code bases. However, you can, instead, go to Source | Inspect and then do a scan throughout a scope (e.g., current file/package/project or combinations of these or all open projects) for class elements that the IDE identifies as potentially having a problem in this area: Thanks to Jan Lahoda, who reports that this currently also works in NetBeans IDE 7.3 dev builds for fields but that may need to be disabled since right now too many false positives are returned, for help with the info above and any misunderstandings are my own fault!

    Read the article

  • iwlwifi on lenovo z570 disabled by hardware switch

    - by Kevin Gallagher
    It was working fine with windows 7. The hardware switch is not disabled. I've toggled it back and forth dozens of times. The wifi light never turns on and it always lists as hardware disabled. I have the latest updates installed. I've been searching for solutions, but none of them seem to work for me. I've tried removing acer-wmi. I've tried setting 11n_disable=1. I've tried resetting the bios. I've tried using rfkill to unblock (only removes soft block). I've rebooted dozens of times. The wifi light turns off as soon as grub loads. Edit: I have a usb edimax wireless nic. It shows hardware disabled as well (although rfkill lists as unblocked). If I unload iwlwifi the usb nic works fine. uname -a `Linux xxx-Ideapad-Z570 3.2.0-55-generic #85-Ubuntu SMP Wed Oct 2 12:29:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linu`x rfkill list 19: phy18: Wireless LAN Soft blocked: no Hard blocked: yes dmesg [43463.022996] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [43463.023002] Copyright(c) 2003-2011 Intel Corporation [43463.023107] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [43463.023190] iwlwifi 0000:03:00.0: setting latency timer to 64 [43463.023253] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [43463.023257] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057c8000 [43463.023261] iwlwifi 0000:03:00.0: HW Revision ID = 0x0 [43463.023797] iwlwifi 0000:03:00.0: irq 43 for MSI/MSI-X [43463.024013] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [43463.024250] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [43463.045496] iwlwifi 0000:03:00.0: device EEPROM VER=0x15d, CALIB=0x6 [43463.045501] iwlwifi 0000:03:00.0: Device SKU: 0X50 [43463.045504] iwlwifi 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [43463.045542] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [43463.045744] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio. [43463.047652] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 [43463.047823] Registered led device: phy18-led [43463.047895] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [43463.048037] ieee80211 phy18: Selected rate control algorithm 'iwl-agn-rs' [43463.055533] ADDRCONF(NETDEV_UP): wlan0: link is not ready nm-tool State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: unavailable Default: no HW Address: 74:E5:0B:4A:9F:C2 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points lshw -C network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:4a:9f:c2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-55-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:43 memory:f1500000-f1501fff lspci 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]

    Read the article

  • Ubuntu hangs on booting up after a update

    - by alFReD NSH
    I've made a clean install yesterday, for the first time restarted, everything went good and then after I updated packages and copied my old home directory to replace the new one, when I restarted it hung when it was booting. I tried reinstalling again and doing the same thing, but again same thing happened. Here's what I see, before when the Ubuntu logo with the five dots is shown: Then after that, 3 or 4 of the dots will load and hangs there. If I press arrow up before that, this will be shown I started my laptop again today(the pictures are for the day before) and after that, boot up with live CD and got the logs. dmesg: http://pastebin.com/aVxV7BQF syslog: http://pastebin.com/4E2BrRUK And some info: alfred@alFitop:~$ uname -a Linux alFitop 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: http://pastebin.com/AZbKJmsT sources.list : http://pastebin.com/2HazmuyV My problem is a bit similar to here: http://ubuntuforums.org/showthread.php?t=1918271 Though I didn't change my x.org config. Only changed home directory and updated packages. I've tried memtest and fschk, both passed. In the recovery mode boot option, I've also realized that same things happen in failsafe graphical mode. But when I go into the network mode, I can boot up my system, but of course same the graphics are just basic. Adding blacklist intel_ips to /etc/modprobe.d/blacklist.conf solves the first message, but still I get the broken pipe and CPU stack traces. The current kernel version is 3.2.0-25, I've tried booting up in the 3.2.0-23(the one the installer came with, but same results.) Also uninstalled apparmor, didn't help. I've installed Ubuntu again, this time without copying the home directory, also same result. --- UPDATE --- This problem was solved before with removing backports, but its back again! I've updated my laptop last night and the problem came back. It's definitely one of these packages. My /var/log/apt/term.log and /var/log/apt/history.log. I'm almost having the same situation. --- UPDATE --- I realized this also have happened on times that I have updated(haven't restarted after it) and my computer power has been cut off and its shutdown due to lack of power. And I realized if I just do as I answered but not in somewhere without GUI(networking mode has the GUI) it wouldn't work.

    Read the article

  • How to leverage the internal HTTP endpoint available on Azure web roles?

    - by Alfredo Delsors
    Imagine you have a Web application using an in-memory collection that changes occasionally but is used very often. The collection gets loaded from storage on the Application_Start global.asax event and is updated whenever its content changes. If you want to deploy this application on Azure you need to keep in mind that more than one instance of the application can be running at any time and therefore you need to provide some mechanism to keep all instances informed with the latest changes. Because the communication through internal endpoints between Azure role instances is at no cost, a good solution can be maintaining the information on Azure Storage Tables, reading its contents on the Application_Start event and populating its changes to all other instances using the internal HTTP port available on Azure Web Roles. You need to follow these steps to leverage the internal HTTP endpoint available on Azure web roles to maintain all instances up to date. 1.   Define an internal HTTP endpoint in the Web Role properties, for example InternalHttpEndpoint   2.   Add a new WCF service to the Web Role, for example NotificationService.svc 3.   Disable multiple site bindings in web.config: <serviceHostingEnvironment multipleSiteBindingsEnabled="false"> 4.   Add a method on the new service to receive notifications from other role instances. namespace Service { [ServiceContract] public interface INotificationService { [OperationContract(IsOneWay = true)] void Notify(Information info); } } 5.   Declare a class that inherits from System.ServiceModel.Activation.ServiceHostFactory and override the method CreateServiceHost to host the internal endpoint. public class InternalServiceFactory : ServiceHostFactory { protected override ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) { var internalEndpointAddress = string.Format( "http://{0}/NotificationService.svc", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["InternalHttpEndpoint"].IPEndpoint); ServiceHost host = new ServiceHost( typeof(NotificationService), new Uri(internalEndpointAddress)); BasicHttpBinding binding = new BasicHttpBinding(SecurityMode.None); host.AddServiceEndpoint( typeof(INotificationService), binding, internalEndpointAddress); return host; } } Note that you can use SecurityMode.None because the internal endpoint is private to the instances of the service. 6.   Edit the markup of the service right clicking the svc file and selecting "View markup" to add the new factory as the factory to be used to create the service <%@ ServiceHost Language="C#" Debug="true" Factory="Service.InternalServiceFactory" Service="Service.NotificationService" CodeBehind="NotificationService.svc.cs" %> 7.   Now you can notify changes to other instances using this code: var current = RoleEnvironment.CurrentRoleInstance; var endPoints = current.Role.Instances .Where(instance => instance != current) .Select(instance => instance.InstanceEndpoints["InternalHttpEndpoint"]); foreach (var ep in endPoints) { EndpointAddress address = new EndpointAddress( String.Format("http://{0}/NotificationService.svc", ep.IPEndpoint)); BasicHttpBinding binding = new BasicHttpBinding(SecurityMode.None); var factory = new ChannelFactory<INotificationService>(binding); INotificationService instance = factory.CreateChannel(address); instance.Notify(changedinfo); }

    Read the article

  • How to deal with Warning : "Uncommittable transaction is detected at the end of the batch. The trans

    - by VishnuTiwariBlog
    Hi, If you are integrating with SQL Server and dealing with batch messages, you may encounter this problem. And this is evitable. The reason is the contention of resources. If your batch contains four messages and all the four messages have to be updated to SQL Server and then at the same time four process will contend for SQL server table and resources and the obvious result will be, few of your transaction will be left uncomitted and if you are not handling dehydration [not modifying the default property of the Dehydration] then your orchestration will dehydrate and will go for retry. If retry is set for every five minutes then after five minutes Port will send the message to the database. Reason for writing this post was as I did not want to see so many DEHYDRATED messages. And this was happening as Host Throttling was not set. Thus as soon as the BizTalk Process finds that SQL resources are unavailable it will go and dehydrate that process and process will go for retry. The contension of resources is unavoidable though we can fine tune the Dehydration setting. If you increase the time that an orchestration can be blocked at a subscription before being dehydrated, possibly you will give more time BizTalk Engine to handle to SQL resource availability. At least I solve the problem by fine tuning the Dehydration properties. Below is the section of config info which you need to add to the BTSNTsvc.exe.config.   <?xml version="1.0" ?> <configuration>        <configSections>               <section name="xlangs" type="Microsoft.XLANGs.BizTalk.CrossProcess.XmlSerializationConfigurationSectionHandler, Microsoft.XLANGs.BizTalk.CrossProcess" />        </configSections>        <runtime>               <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">                      <probing privatePath="BizTalk Assemblies;Developer Tools;Tracking" />               </assemblyBinding>        </runtime>        <xlangs>               <Configuration>                      <Dehydration MaxThreshold="1800" MinThreshold="1" ConstantThreshold="-1">                             <VirtualMemoryThrottlingCriteria OptimalUsage="900" MaximalUsage="1300" IsActive="true" />                             <PrivateMemoryThrottlingCriteria OptimalUsage="50" MaximalUsage="350" IsActive="true" />                             <PhysicalMemoryThrottlingCriteria OptimalUsage="50" MaximalUsage="350" IsActive="false" />                      </Dehydration>               </Configuration>        </xlangs> </configuration>

    Read the article

  • Thinkpad brightness steps error using FN+Home/End

    - by petermolnar
    I've met the following problem: normally my T400 (Lenovo Thinkpad) has 16 steps of brightness, and Windows utilizes it correctly. After a fresh install & minor tweaks Mint 12 (which is based on 11.10 Ubuntu) I only had 6 steps which was way to few. Listing /sys/class/backlight showed 3 entried. I removed the acpi-tools package, one of the disapperared - and I now have 10 steps! Therefore I think if I can reduce the entries to 1 I'm going to have 16 steps, since the stepping will be 1 instead of 2 (or 3). /sys/class/backlight/ intel_backlight -> ../../devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1/intel_backlight thinkpad_screen -> ../../devices/virtual/backlight/thinkpad_screen The problem is that I'm unable to trace back what are the configs / daemons / kernel options triggers these two. More strangely, I discovered a strange behaviour. I monitored watch -n1 "cat /sys/class/backlight/thinkpad_screen/actual_brightness" and watch -n1 "cat /sys/class/backlight/intel_backlight/actual_brightness" while changing the brightness with FN+home/end combinations from max to min. The outcome is the following: brighness intel thinkpad --------- ----- -------- MAX 2408475 7 | 1955115 5 | 1435640 3 | 1246740 1 | 1086175 0 | 1010615 6 | 859495 4 | 689485 2 v 481695 0 MIN 217235 0 brighness intel thinkpad --------- ----- -------- MIN 217235 0 | 481695 2 | 689485 4 | 859495 6 | 1010615 7 | 1086175 1 | 1246740 3 | 1435640 5 v 1955115 7 MAX 2408475 0 When stepping from MIN to MAX, there's no difference between the last 2 steps. Also, the OSD icon (Cinnamon desktop, default theme) goes from full to min in 4 steps and from full to min once again in 4 steps. So... it seems that the intel entry is working correctly, showing correct values. The thinkpad entry however twists the things and even showing incorrect values. Does anyone have any idea how to get rid of the thinkpad entry? System data: Linux Mint 12 3.0.0-16 kernel Lenovo ThinkPad T400 Cinnamon 1.4 desktop For any additional info, please tell me what do you need. EDIT I'm sorry, I forgot to mention, I added acpi_backlight=vendor to GRUB cmdline as well, this is the result of the semi-better working than the default.

    Read the article

  • Error while removing the new kernel 2.6.37

    - by Tarek
    Hi! I tried to install the new kernel but something went wrong and I'm trying to remove it now. The error massege is: mhd@Tarek-Laptop:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: linux-image-2.6.37-020637-generic 0 upgraded, 0 newly installed, 1 to remove and 9 not upgraded. 1 not fully installed or removed. After this operation, 111MB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 188780 files and directories currently installed.) Removing linux-image-2.6.37-020637-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.37-020637-generic /boot/vmlinuz-2.6.37-020637-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 2.6.37-020637-generic /boot/vmlinuz-2.6.37-020637-generic /etc/default/grub: 33: Syntax error: EOF in backquote substitution run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 2 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-2.6.37-020637-generic.postrm line 328. dpkg: error processing linux-image-2.6.37-020637-generic (--remove): subprocess installed post-removal script returned error exit status 1 Errors were encountered while processing: linux-image-2.6.37-020637-generic E: Sub-process /usr/bin/dpkg returned an error code (1) The previous unsloved error is on this bug. This is my grub configuration file: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` RUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1024x768-24,mtrr=3,scroll=ywrap" video=uvesafb:mode_option=>>1024x768-24<<,mtrr=3,scroll=ywrap" GRUB_CMDLINE_LINUX=" vga=792 splash" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' GRUB_GFXMODE=1024x768-24 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_LINUX_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" thank you for answering.

    Read the article

  • Making A Photo-Sharing App For Android In Eclipse [on hold]

    - by user3694394
    I've only just started developing mobile apps, which is something that I've been wanting to learn for a while now. I'm from an indie games studio, making PC games for around the last 3 years, and I finally decided to move into android app development. The only problem I'm having is that I don't know where to start. The project which I'm aiming to create will be something similar to Instagram, basically a photo-sharing app which allows users to take new photos, or pull them from their device, and add filters to them, before posting them. I have a rough idea of how I could go about doing this, but I need pointing towards any tutorials available for each specific step. So, here's my idea: Create a UI in eclipse (this wont be a problem for me, I should be able to do this fine through xml files) Setup a server-side database to store all user info and uploaded images (the images will need to be converted into byte arrays, and I have no idea how to do this through a database). My best idea would be to use a MySQL database to do this. Add user interactions (likes, favourites, reposts, etc.). This would, again, have to be stored in the database (or, at least, i think it would). Add the ability to take new photos using the phone's camera (I can probably do this anyway, using the Camera API). Add the ability to pull existing photos from the device (again, pretty simple to do). Add the ability to add filters to any photos (I had a look around, and there are some repos and resources which allow you to do this, but they're mainly for iOS development). Add facebook/twitter integration (possibly) to allow phots to be shared to other social networks. Create a news feed which shows users all of the latest photos from their friends, and allows them to post their own images to it. Give all registered users their own wall/page which has their latest posts/images displayed on it. Add the ability to allow users to follow other users, and display their followed users posts on their news feed. Yep. It's not going to be easy, and I don't even know if it's possible for me to do alone in Eclipse. However, this is the plan, and I'm going to do my best to learn everything I need to know to do this successfully. My actual question would be how should I start doing this- where do I begin learning how to do all of this? I've had a look at snapify, which can be edited via Parse, but I won't be spending hundreds of dollars (since I'm 15 and just don't have the available funds) on software. I have extensive knowledge of Java (again, I've been making games for around 3 years, mainly in Java), and various scripting languages. So, hopefully, this will be of some use here. Thanks in advance, Josh.

    Read the article

  • Oracle Partner Architects Training

    - by mseika
    Dear Oracle Partner, There is a lot more to Oracle technology than meets the eye. Sure, you already belong to a small circle of our most experienced and committed partners. But are you making the best use possible of our technology solutions? Put it to the test.  Join the “Oracle Partner Architects Training”. It is aimed at providing your experts, architects and consultants with in-depth architectural knowledge about Oracle technology. Here is your chance to learn from the best. Seasoned speakers, exclusive content and no product marketing. Oracle technology beyond the obvious. Choose from any of the 40 recorded training sessions. Topics include:  • Security• Service integration • Database and options• Data integration • BI and applications• Applications and infrastructure• Hardware and software combinations The market and Oracle value specialized partners More information about specialization can be found on opn.oracle.com. Click through to OPN Program/Specialize “What’s in it for us?” Quite simply: the opportunity to gain the differentiation and competitive edge you need to stand out in the marketplace. • Differentiate your company through expertise in leading Oracle IT solutions;• Get your experts, architects and consultants up to speed on specialized services and solutions;• Make our customers’ shortlists. They are looking for value-added solutions for their business.   Recordings All sessions are recorded. After registering for a session in oraevents, you will receive the info to access the webex recording. Your timing, your tempo.  Registration and more information Visit architects.oraevents.eu to sign up for the recorded sessions. NOTE: Looking to get your consultants Oracle certified? One more reason to join the Oracle Partner Architects Training. It is the fast track to getting their expertise validated with an Oracle certificate. Training schedule  Choose from any of the 40 recorded training sessions: SECURITY THE PRACTICAL APPROACH •  Identity governance• Access management• Data privacy and protection• End-to-end security, layers of exposures•  Identity & access management, why and where to start?• Data security, how? SERVICE INTEGRATION A NEW ROADTO ENTERPRISE-WIDE SERVICE INTEGRATION • Oracle RUEI: maximize business value by insight into real end-user experiences•  Governance challenges in the services landscape•  Creating an agile enterprise (by Jeff Davies)• Oracle’s approach to SOA (by Jeff Davies) - guiding and accelerating SOA success• Technical case study – the SOA challenge• Oracle’s unified business process management suite 11g (incl. demo) DATABASE DATABASE AND OPTIONS, GOINGWIDE •  Understanding service level agreements for databases• Database lifecycle management• Data centric information lifecycle management DATA INTEGRATION  DIS FOR ARCHITECTS • Data integration solutions: an overview• ODI and goldengate• Data quality

    Read the article

  • Simplifying Human Capital Management with Mobile Applications

    - by HCM-Oracle
    By Aaron Green If you're starting to think 'mobility' is a recurring theme in your reading, you'd be right. For those who haven't started to build organisational capabilities to leverage it, it's fair to say you're late to the party. The good news: better late than never. Research firm eMarketer says the worldwide smartphone audience will total 1.75 billion this year, while communications technology and services provider Ericsson suggests smartphones will triple to 5.6 billion globally by 2019. It should be no surprise, smart phone adoption is reaching the farthest corners of the globe; the subsequent impact of enterprise applications enabled by these devices is driving business performance improvement and will continue to do so. Companies using advanced workforce analytics can add significantly to the bottom line, while impacting customer satisfaction, quality and productivity. It's a statement that makes most business leaders sit forward in their chairs. Achieving these three standards is like sipping The Golden Elixir for the business world. No-one would argue their importance. So what are 'advanced workforce analytics?' Simply, they're unprecedented access to workforce trends and performance markers. Many are made possible by a mobile world and the enterprise applications that come with it on smart devices. Some refer to it as 'the consumerisation of IT'. As this phenomenon has matured and become more widely appreciated it has impacted the spectrum of functional units within an enterprise differently, but powerfully. Whether it's sales, HR, marketing, IT, or operations, all have benefited from a more mobile approach. It has been the catalyst for improvement in, and management of, the employee experience. The net result of which is happier customers. The obvious benefits but the lesser realised impact Most people understand that mobility allows for greater efficiency and productivity, collaboration and flexibility, but how that translates into business outcomes within the various functional groups is lesser known. In actuality mobility has helped galvanise partnerships between cross-functional groups within the enterprise. Where in some quarters it was once feared mobility could fragment a workforce, its rallying cry of support is coming from what you might describe as an unlikely source - HR. As the bedrock of an enterprise, it is conceivable HR might contemplate the possible negative impact of a mobile workforce that no-longer sits in an office, at the same desks every day. After all, who would know what they were doing or saying? How would they collaborate? It's reasonable to see why HR might have a legitimate claim to try and retain as much 'perceived control' as possible. The reality however is mobility has emancipated human capital and its management. Mobility and enterprise applications are expediting decision making. Google calls it Zero Moment of Truth, or ZMOT. It enables smoother operation and can contribute to faster growth. From a collaborative perspective, with the growing use of enterprise social media, which in many cases is being driven by HR, workforce planning and the tangible impact of change is much easier to map. This in turn provides a platform from which individuals and teams can thrive. With more agility and ability to anticipate, staff satisfaction and retention is higher, and real time feedback constant. The management team can save time, energy and costs with more accurate data, which is then intelligently applied across the workforce to truly engage with staff, customers and partners. From a human capital management (HCM) perspective, mobility can help you close the loop on true talent management. It can enhance what managers can offer and what employees can provide in return. It can create nested relationships and powerful partnerships. IT and HR - partners and stewards of mobility One effect of enterprise mobility is an evolution in the nature of the relationship between HR and IT from one of service provision to partnership. The reason for the dynamic shift is largely due to the 'bring your own device' (BYOD) movement, which is transitioning to a 'bring your own application' (BYOA) scenario. As enterprise technology has in some ways reverse-engineered its solutions to help manage this situation, the partnership between IT (the functional owner) and HR (the strategic enabler) is deeply entrenched. And it has to be. The CIO and the HR leader are faced with compliance and regulatory issues and concerns around information security and personal privacy on a daily basis, complicated by global reach and varied domestic legislation. There are tens of thousands of new mobile apps entering the market each month and, unlike many consumer applications which get downloaded but are often never opened again after initial perusal, enterprise applications are being relied upon by functional groups, not least by HR to enhance people management. It requires a systematic approach across all applications in use within the enterprise in order to ensure they're used to best effect. No turning back, and no desire to With real time analytics on performance and the ability for immediate feedback, there is no turning back for managers. In my experience with Oracle, our customers' operational efficiency is at record levels. It's clear as a result of the combination of individual KPIs and organisational goals, CIOs have been able to give HR leaders the ability to build predictive models that feed into an enterprise organisations' evolving strategy. It also helps them ensure regulatory compliance much more easily. Once an arduous task, with mobile enabled automation and quality data, compliance is simpler. Their world has changed for the better. For the CIO, mobility also assists them to optimise performance. While it doesn't come without challenges, mobile-enabled applications and the native experience users have with them means employees don't need high-level technical expertise to train users. It reduces the training and engagement required from the IT team so they can focus on other things that deliver value to the bottom line; all the while lowering the cost of assets and related maintenance work by simplifying processes. Rewards of a mobile enterprise outweigh risks With mobile tools allowing us to increasingly integrate our personal and professional lives, terms like "office hours" are becoming irrelevant, so work/life balance is a cultural must. Enterprises are expected to offer tools that enable workers to access information from anywhere, at any time, from any device. Employees want simplicity and convenience but it doesn't stop at private enterprise. This is a societal shift. Governments, which traditionally have been known to be slower to adopt newer technology, are also offering support for local businesses to go mobile. Several state government websites have advice on how to create mobile apps and more. And as recently as last week the Victorian Minister for Technology Gordon Rich-Phillips unveiled his State government's ICT roadmap for the next two years, which details an increased use of the public cloud, as well as mobile communications, and improved access to online data-sets. Tech giants are investing significantly in solutions designed to simplify mobile deployment and enablement. The mobility trend is creating a wave of change in the industry and driving transformation in the enterprise. If you're not on that wave, the business risk continues to rise as your competitiveness drops. Aaron is the Vice President of HCM Strategy at Oracle Corporation where he is responsible for researching and identifying emerging trends in the practice of Human Resources and works to deliver industry-leading technology solutions. Other responsibilities include, ownership of Oracle's innovative HCM solutions across JAPAC and enabling organisations to transform and modernise their workforce tools. Follow him on Twitter @aaronjgreen

    Read the article

  • How can I fix broken i915 drivers for Intel GPUs?

    - by Alen Mujezinovic
    I've got troubles getting the i915 drivers to work correctly on my laptop (HP Pavilion DM4 2101ea). Specifically, the laptop screen goes black and stays black after the splash graphic when booting both from USB key and from harddrive. To get anything on to the display after the splash screen I have to boot either with acpi=off nomodeset i915.modeset=0 I'd rather not turn ACPI off because I like my fans spinning and nomodeset is a bit overkill, so for now I'm booting with i915.modeset=0. Unfortunately, this turns off KMS and my current maximum resolution on the laptop screen is fixed to 1024x768 instead of its real capability. When not setting any of the above boot flags and I plug in an external monitor, the external monitor works fine. When booting with the flags, the external monitor works fine too, but can only do 1024x768 and can't do anything else than mirroring the laptop display. I did upgrade the i915 drivers from 2.17 that ship with Precise to 2.19 which are the most recent ones but without luck of getting anything to display. Here's my lspci output: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 08:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) Here's lshw -C video *-display UNCLAIMED description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:c0000000-c03fffff memory:b0000000-bfffffff ioport:4000(size=64) Both outputs are generated after booting with i915.modeset=0. Here's a complete Xorg.log file from a boot into a black screen: https://gist.github.com/479ce06454e47d6123e1 The graphics card is a Intel HD 3000 integrated GPU. I've never had problems with Intel hardware on Ubuntu before so this is very surprising. If you could provide a method to make i915 work, suggest alternative drivers a way to boot with i915.modeset=0 but higher resolutions and KMS on or explain what is happening and how to fix it I'll give you an answer badge. :) Thanks

    Read the article

  • A sample Memento pattern: Is it correct?

    - by TheSilverBullet
    Following this query on memento pattern, I have tried to put my understanding to test. Memento pattern stands for three things: Saving state of the "memento" object for its successful retrieval Saving carefully each valid "state" of the memento Encapsulating the saved states from the change inducer so that each state remains unaltered Have I achieved these three with my design? Problem This is a zero player game where the program is initialized with a particular set up of chess pawns - the knight and queen. Then program then needs to keep adding set of pawns or knights and queens so that each pawn is "safe" for the next one move of every other pawn. The condition is that either both pawns should be placed, or none of them should be placed. The chessboard with the most number of non conflicting knights and queens should be returned. Implementation I have 4 classes for this: protected ChessBoard (the Memento) private int [][] ChessBoard; public void ChessBoard(); protected void SetChessBoard(); protected void GetChessBoard(int); public Pawn This is not related to memento. It holds info about the pawns public enum PawnType: int { Empty = 0, Queen = 1, Knight = 2, } //This returns a value that shown if the pawn can be placed safely public bool IsSafeToAddPawn(PawnType); public CareTaker This corresponds to caretaker of memento This is a double dimentional integer array that keeps a track of all states. The reason for having 2D array is to keep track of how many states are stored and which state is currently active. An example: 0 -2 1 -1 2 0 - This is current state. With second index 0/ 3 1 - This state has been saved, but has been undone private int [][]State; private ChessBoard [] MChessBoard; //This gets the chessboard at the position requested and assigns it to originator public ChessBoard GetChessBoard(int); //This overwrites the chessboard at given position public void SetChessBoard(ChessBoard, int); private int [][]State; public PlayGame (This is the originator) private bool status; private ChessBoard oChessBoard; //This sets the state of chessboard at position specified public SetChessBoard(ChessBoard, int); //This gets the state of chessboard at position specified public ChessBoard GetChessBoard(int); //This function tries to place both the pawns and returns the status of this attempt public bool PlacePawns(Pawn);

    Read the article

  • CES 2011–Microsoft Keynote Impressions

    - by guybarrette
    Microsoft has been kicking off the CES for a number of years by doing a keynote the evening of the event first day.  This year, SteveB talked about Xbox, Kinect, Windows 7 new laptops, Surface 2 and Windows vNext running on the ARM architecture. Some of the design of the new laptops showed are quite amazing.  This one has a dual screen with no physical keyboard.  The image is split between both screens.  A software keyboard appears when you place your 10 fingers on the lower screen. This one from Samsung has a sliding keyboard somewhat like numerous cell phones have. What I found the most amazing is that Intel was able to miniaturized a full Intel architecture (CPU, motherboard, memory) in a tiny form factor.  Imagine having the power of a full PC running .NET apps in a Zune/iPod form factor! They also showed V2 of the Surface device.  This one is called the Samsung SUR40 for Surface PC.  It’s much sleeker and it will likely loose the BAT (Big Ass Table) moniker  More info here SteveB announced that Windows vNext will run on ARM chips.  I’m intrigued by this announcement (you can read about it here) and I have many questions: -In the past ARM devices were slow, what now makes the ARM architecture able to run Windows? -ARM is 32-bit only, I think. -Does this mean that Intel wasn't able to provide such a lightweight architecture or simply that they weren't interested? -From what I understand, apps would need to be recompiled for ARM. Will we need to do that from an ARM PC or could it be done natively on Intel or on an Intel PC running in an ARM VM?  VS 2012? Ahhhh, smells like a cool PDC is coming up    Clearly it looks like PC have enough power for most of us right now and that the race is now about miniaturization, power consumption and battery life. You can watch the Microsoft CES 2011 keynote here var addthis_pub="guybarrette";

    Read the article

  • 1000baseT/Full Supported and Advertised but not working!

    - by user11973
    Hello, i'm using a AT3IONT-I motherboard with integrated card. If I ethtool it to 1000 full duplex it wont work! Here is sudo ethtool eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) Link detected: yes here is sudo lshw -C network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: 03 serial: bc:ae:c5:8b:7d:33 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.021.00-NAPI duplex=full ip=192.168.0.2 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:42 ioport:e800(size=256) memory:f8fff000-f8ffffff memory:f8ff8000-f8ffbfff memory:fbff0000-fbffffff And lspci -nn: 00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge [10de:0a82] (rev b1) 00:00.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a88] (rev b1) 00:03.0 ISA bridge [0601]: nVidia Corporation MCP79 LPC Bridge [10de:0aad] (rev b3) 00:03.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0aa4] (rev b1) 00:03.2 SMBus [0c05]: nVidia Corporation MCP79 SMBus [10de:0aa2] (rev b1) 00:03.3 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a89] (rev b1) 00:03.5 Co-processor [0b40]: nVidia Corporation MCP79 Co-processor [10de:0aa3] (rev b1) 00:04.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa5] (rev b1) 00:04.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa6] (rev b1) 00:06.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa7] (rev b1) 00:06.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa9] (rev b1) 00:08.0 Audio device [0403]: nVidia Corporation MCP79 High Definition Audio [10de:0ac0] (rev b1) 00:09.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Bridge [10de:0aab] (rev b1) 00:0b.0 RAID bus controller [0104]: nVidia Corporation MCP79 RAID Controller [10de:0abc] (rev b1) 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac4] (rev b1) 00:10.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0aa0] (rev b1) 00:15.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac6] (rev b1) 03:00.0 VGA compatible controller [0300]: nVidia Corporation ION VGA [10de:087d] (rev b1) 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) If i use Code: sudo ethtool -s eth0 speed 1000 duplex full autoneg off then in ethtool speed is Unknown and it doesn't work; if I set it via pre-up it wont work either... Please help!! Thanks!

    Read the article

  • Using the @ in SQL Azure Connections

    - by BuckWoody
    The other day I was working with a client on an application they were changing to a hybrid architecture – some data on-premise and other data in SQL Azure and Windows Azure Blob storage. I had them make a couple of corrections - the first was that all communications to SQL Azure need to be encrypted. It’s a simple addition to the connection string, depending on the library you use. Which brought up another interesting point. They had been using something that looked like this, using the .NET provider: Server=tcp:[serverName].database.windows.net;Database=myDataBase; User ID=LoginName;Password=myPassword; Trusted_Connection=False;Encrypt=True; This includes most of the formatting needed for SQL Azure. It specifies TCP as the transport mechanism, the database name is included, Trusted_Connection is off, and encryption is on. But it needed one more change: Server=tcp:[serverName].database.windows.net;Database=myDataBase; User ID=[LoginName]@[serverName];Password=myPassword; Trusted_Connection=False;Encrypt=True; Notice the difference? It’s the User ID parameter. It includes the @ symbol and the name of the server – not the whole DNS name, just the server name itself. The developers were a bit surprised, since it had been working with the first format that just used the user name. Why did both work, and why is one better than the other? It has to do with the connection library you use. For most libraries, the user name is enough. But for some libraries (subject to change so I don’t list them here) the server name parameter isn’t sent in the way the load balancer understands, so you need to include the server name right in the login, so the system can parse it correctly. Keep in mind, the string limit for that is 128 characters – so take the @ symbol and the server name into consideration for user names. The user connection info is detailed here: http://msdn.microsoft.com/en-us/library/ee336268.aspx Upshot? Include the @servername on your connection string just to be safe. And plan for that extra space…  

    Read the article

  • Is there an API for determining congressional districts?

    - by ardavis
    I'm looking to determine the congressional district based on an address my user is providing. This will avoid having the user to look it up themselves. Does an API of this sort exist? Note Through my attempts to find one, I've only come across these: http://www.govtrack.us/developers/api (not sure how to submit an an address or zip code however) The following resources are available in the API ...Bills and resolutions in the U.S. Congress since 1973 (the 93rd Congress). ...A (bill, person) pair indicating cosponsorship, with join and withdrawn dates. ...Members of Congress and U.S. Presidents since the founding of the nation. ...Terms held in office by Members of Congress and U.S. Presidents. Each term corresponds with an election, meaning each term in the House covers two years (one 'Congress'), as President four years, and in the Senate six years (three 'Congresses'). ...Roll call votes in the U.S. Congress since 1789. How people voted is accessed through the Vote_voter API. ...How people voted on roll call votes in the U.S. Congress since 1789. See the Vote API. Filter on the vote field to get the results of a particular vote... http://www.opencongress.org/api (seems to be a way to find congress information, but not districts) This API provides programmers with structured access to all the data on OpenCongress, everything from official bill info to news and blog coverage to user-generated votes on bills and much more... This API defaults to returning XML. All queries can also return JSON... https://groups.google.com/forum/?fromgroups=#!topic/opendems-discuss/CeKyi_aANaE (similar question, no resolution) I've been looking over Open Dems, and seeing what's exposed at this point and what isn't. I work with Democrats Abroad, and am interested in using stuff from the lab for their sites. I quickly looked over the Precinct API, which does both more and less than what I'd need. An ideal resource would be any way of translating addresses into CD at the very least (getting state district data would be good as well), since that would make it easier for DA's membership to make a difference in races like last month's NY26 race... Update I'm looking at the source for the govtrack.us website and the 'doGeoCode' function may be useful. view-source:http://www.govtrack.us/congress/members If no one has any suggestions, I will try to go off of what they are doing.

    Read the article

  • PeopleSoft Grants & the Federal Agency Letter of Credit Draw Changes

    - by Mark Rosenberg
    For decades, most, if not all, US Federal agencies that sponsor research allowed grant recipients to request and receive payments using pooled accounts, commonly known as pooled letter of credit (LOC) draws. This enabled organizations, such as universities and hospitals, fast and efficient access to reimbursement of the expenditures they incurred conducting research across a portfolio of grants. To support this business practice, the PeopleSoft Grants solution has delivered an LOC Draw report to provide the total request amount along with all of the supporting invoice details for reconciliation and audit purposes. Now, in an attempt to provide greater transparency, eliminate fraud, strengthen accountability for grant-related financial transactions, and simplify grant award closeout, many US Federal sponsors are transitioning from the “pooling” letter of credit draw method to requesting on a “grant-by-grant” basis. The National Science Foundation, the second largest issuer of Federal awards, already transitioned to detailed grant draws in 2013. And, in response to the U.S. Department of Health and Human Services (HHS) directive to HHS-supported Agencies, the largest Federal awards sponsor, the National Institutes of Health (NIH), will fully transition to the new HHS subaccount draw method. This will require NIH award recipients to request payments based on actual expenses incurred on an award-by-award basis. NIH is expected to fully transition to this new draw method by the end of Federal fiscal year 2015.  (The NIH had planned to fully transition to this new method by the end of fiscal 2014; however, the impact to institutions was deemed to be significant enough that a reprieve was recently granted.) In light of these new Federal draw requirements, we have recently released these new features to aid our customers on both PeopleSoft Grants releases 9.1 and 9.2:1. Federal Award Identification Number on the Proposal and Award Profile 2. Letter of credit fields on contract lines to support award basis draws and comply with Federal close out mandates3. Process to produce both pro forma and final LOC Draw Reports in BI Publisher report format4. Subacccount ID field on the LOC Summary and a new BI Publisher version of the LOC Summary report 5. Added Subaccount Field and contract info to be displayed on the LOC summary page6. Ability to generate by a variety of dimensions pro forma and invoiced draw listings 7. Queries for generation and manipulation of data to upload into sponsor payment request systems and perform payment matching8. Contracts LOC Close Out query to quickly review final balances prior to initiating final draws and preparing Federal Financial Reports prior to close The PeopleSoft Development team actively monitors this and other major Federal changes and continues working closely with the Grants Product Advisory Group of the Higher Education User Group to ensure a clear understanding of what our customers need in order to transition to new approaches for doing business with the Federal government. For more information regarding the enhancements to the PeopleSoft Grants solution, existing customers can login to My Oracle Support and review the Enhancements to Letter of Credit Process (Doc ID 1912692.1) associated with resolution ID 904830. This enhanced LOC functionality is available in both PeopleSoft FSCM 9.1 Bundle #31 and PeopleSoft FSCM 9.2 Update Image 8.

    Read the article

  • What could be the best way to generalize data from Facebook and Twitter?

    - by Sjaak van der Heide
    I am not sure if this is the best subsite to ask this question, but I'm pretty sure it doesn't fit on the normal or facebook SO page... I've been asked to make a general API for connecting to several Social Media platforms (at the moment Facebook and Twitter). I have already realised both of them seperately. Meaning I retrieve the data I need from both Facebook and Twitter and hold the data in it's own dataclass. In my case a list of FacebookTimelineItems and a list of TwitterTimelineItems. now the hard part is taking the parts that are used in both (username, id, message and such) and make 1 general class that is eventually passed on to who/whatever sent the call to my API. these are two pics of the data classes I have: http://imageshack.us/photo/my-images/703/facebookdata.png/ http://imageshack.us/photo/my-images/204/twitterdata.png/ probably not 100% correct but it gives an idea what it looks like. Now I've been having several idea about how to go about and generalize the two, which is harder then I thought at first. Create an interface (TimelineItem) and let the other classes extend that one. this way I'll always be sure I have a class that contains at least the basic info I need. downside is that deserializing the JSON seems to be a nightmare. Use the two dataclasses I have and combine them into a new class afterwards, then pass that one back to whoever requested it. This would probably work but I get the idea it's not the best way to tackle this problem, and is pretty dodgy IF I get it working. Or, in case of the other two being nearly impossible. Keep the two seperated in the front end, and go sit in the corner crying because I've just figured out you can't lump together facebook and twitter... Note: I don't have to make the front end part (view), I just make sure the Model is nicely filled with data :) I hope I placed this in the right section, if I didn't I apologise and would like to know where I should go with my question. Thanks in advance for any replied/ideas/opinions on this.

    Read the article

  • Webcast Q&A: ING on How to Scale Role Management and Compliance

    - by Tanu Sood
    Thanks to all who attended the live webcast we hosted on ING: Scaling Role Management and Access Certifications to Thousands of Applications on Wed, April 11th. Those of you who couldn’t join us, the webcast replay is now available. Many thanks to our guest speaker, Mark Robison, Enterprise Architect at ING for walking us through ING’s drivers and rationale for the platform approach, the phased implementation strategy, results & metrics, roadmap and recommendations. We greatly appreciate the insight he shared with us all on the deployment synergies between Oracle Identity Manager (OIM) and Oracle Identity Analytics (OIA) to enforce streamlined user and role management and scalable compliance. Mark was also kind enough to walk us through specific solutions features that helped ING manage the problem of role explosion and implement closed loop remediation. Our host speaker, Neil Gandhi, Principal Product Manager, Oracle rounded off the presentation by discussing common use cases and deployment scenarios we see organizations implement to automate user/identity administration and enforce closed-loop scalable compliance. Neil also called out the specific features in Oracle Identity Analytics 11gR1 that cater to expediting and streamlining compliance processes such as access certifications. While we tackled a few questions during the webcast, we have captured the responses to those that we weren’t able to get to here; our sincere thanks to Mark Robison for taking the time to respond to questions specific to ING’s implementation and strategy. Q. Did you include business friendly entitlment descriptions, or is the business seeing application descriptors A. We include very business friendly descriptions.  The OIA tool has the facility to allow this. Q. When doing attestation on job change, who is in the workflow to review and confirm that the employee should continue to have access? Is that a best practice?   A. The new and old manager  are in the workflow.  The tool can check for any Separation of Duties (SOD) violations with both having similiar accesses.  It may not be a best practice, but it is a reality of doing your old and new job for a transition period on a transfer. Q. What versions of OIM and OIA are being used at ING?   A. OIM 11gR1 and OIA 11gR1; the very latest versions available. Q. Are you using an entitlements / role catalog?   A. Yes. We use both roles and entitlements. Q. What specific unexpected benefits did the Identity Warehouse provide ING?   A. The most unanticipated was to help Legal Hold identify user ID's in the various applications.   Other benefits included providing a one stop shop for all aggregated ID information. Q. How fine grained are your application and entitlements? Did OIA, OIM support that level of granularity?   A. We have some very fine grained entitlements, but we role this up into approved Roles to allow for easier management.   For managing very fine grained entitlements, Oracle offers the Oracle Entitlement Server.  We currently do not own this software but are considering it. Q. Do you allow any individual access or is everything truly role based?   A. We are a hybrid environment with roles and individual positive and negative entitlements Q. Did you use an Agile methodology like scrum to deliver functionality during your project? A. We started with waterfall, but used an agile approach to provide benefits after the initial implementation Q. How did you handle rolling out the standard ID format to existing users? A. We just used the standard IDs for new users.  We have not taken on a project to address the existing nonstandard IDs. Q. To avoid role explosion, how do you deal with apps that require more than a couple of entitlement TYPES? For example, an app may have different levels of access and it may need to know the user's country/state to associate them with particular customers.   A. We focus on the functional user and craft the role around their daily job requirements.  The role captures the required application entitlements.  To keep role explosion down, we use role mining in OIA and also meet and interview the business.  It is an iterative process to get role consensus. Q. Great presentation! How many rounds of Certifications has ING performed so far?  A. Around 7 quarters and constant certifications on transfer. Q. Did you have executive support from the top down   A. Yes  The executive support was key to our success. Q. For your cloud instance are you using OIA or OIM as SaaS?  A. No.  We are just provisioning and deprovisioning to various Cloud providers.  (Service Now is an example) Q. How do you ensure a role owner does not get more priviliges as are intended and thus violates another role, e,g, a DBA Roles should not get tor rigt to run somethings as root, as this would affect the root role? A. We have SOD  checks.  Also all Roles are initially approved by external audit and the role owners have to certify the roles and any changes Q. What is your ratio of employees to roles?   A. We are still in process going through our various lines of business, so I do not have a final ratio.  From what we have seen, the ratio varies greatly depending on the Line of Business and the diversity of Job Functions.  For standardized lines of business such as call centers, the ratio is very good where we can have a single role that covers many employees.  For specialized lines of business like treasury, it can be one or two people per role. Q. Is ING using Oracle On Demand service ?   A. No Q. Do you have to implement or migrate to OIM in order to get the Identity Warehouse, or can OIA provide the identity warehouse as well if you haven't reached OIM yet? A. No, OIM deployment is not required to implement OIA’s Identity Warehouse but as you heard during the webcast, there are tremendous deployment synergies in deploying both OIA and OIM together. Q. When is the Security Governor product coming out? A. Oracle Security Governor for Healthcare is available today. Hope you enjoyed the webcast and we look forward to having you join us for the next webcast in the Customers Talk: Identity as a Platform webcast series: Toyota: Putting Customers First – Identity Platform as a Business Enabler Wednesday, May 16th at 10 am PST/ 1 pm EST Register Today You can also register for a live event at a city near you where Aberdeen’s Derek Brink will discuss the survey results from the recently published report “Analyzing Platform vs. Point Solution Approach in Identity”. And, you can do a quick (& free)  online assessment of your identity programs by benchmarking it against the 160 organizations surveyed  in the Aberdeen report, compliments of Oracle. Here’s the slide deck from our ING webcast: ING webcast platform View more presentations from OracleIDM

    Read the article

  • Another Custom Property Locator: a Library of Books

    - by Cindy McMullen
    Introduction The previous post gave an introduction to custom property locators and showed how create one using JDeveloper.  This post continues on the custom locator theme, with a slightly more complex locator: a library of books.  It demonstrates using the DAO pattern to delegate data access from the Locator, which is likely how many actual backing stores will integrate with the Locator.  You can imagine, rather than a library of books, the data store might be a user database of sorts.  The same sort of pattern would apply. This post uses the BookLocator example originally shown in the WebCenter documentation, but has: updated the source code to reflect the final Property APIs includes the steps for generating the namespace and property definition files via JDeveloper detailed usage of the PropertyService APIs Getting Started If you're new to JDeveloper, you might want to check out this tutorial.  There is also the "Jump-Start to using Personalization" blog post that you might find useful.  Otherwise, if you're already familiar with both, you can skip those tutorials and jump right in to using JDeveloper. Download the BookLocator.zip file (which has been updated from the original post) and unzip it to a new directory.  Start JDeveloper, navigate to the BookLocator.jws file, and open it.   It should look something like this: The Properties Namespace file contains the property definitions and property set definitions you define.  It is explained more in detail in the Namespace documentation.  Although this example doesn't show it, the property set definitions have the ability to reference multiple locators per property.   This can be done by right-clicking on the 'Locator Info' box.  Configure the contents of the Locator Map  by editing locators and mapping them to available property names in the property set definition. Compiling, deploying, and running your locator The rest of the steps in this tutorial basically follow those in the previous blog on custom locators, and won't be repeated here.   A scenario to invoke your locator is included with the sample app: see BookProperties.scenarios_diagram above.  Summary This post demonstrates a simple library of books accessed by the BookPropertyLocator via the DAO layer.  This is a useful pattern for more realistic property retrievals, such as a backing user store.  It also points out the possibility of retrieving properties from multiple locators, which would be quite handy to retrieve user attributes from multiple sources.

    Read the article

  • Layout of mathematical views (iOS)

    - by William Jockusch
    I am trying to figure out the right way to encapsulate graphical information about mathematical objects. It is not simple. For example, a matrix can include square brackets around its entries, or not. Some things carry down to sub-objects -- for example, a matrix might track the font size to be used by its entries. Similarly, the font color and the background color would carry down to the entries. Other things do not carry down. For example, the entries of the matrix do not need to know whether or not the matrix has those square brackets. Based on all of the above, I need to calculate sizes for everything, then frames. All of this can depend on the properties stored above. The size of a matrix depends on the sizes of its entries, and also on whether or not it has those brackets. What I am having a hard time with is not the individual ways to calculate sensible frames for this or that. It is the overall organizational structure of the whole thing. How can I keep track of it all without going crazy. One particular obstacle is worth mentioning -- for reasons I don't want to go into here, I need to calculate the sizes and frames for everything before I instantiate any actual views. So, for example, if I have a Matrix object, I need to calculate its size before I make a MatrixView. If I have an equation, I need to calculate the size of the view for the equation before I create the actual view. So I clearly need separate objects for those calculations. But I can't figure out a sensible class structure for those objects. If I put them all into a single class, I get some advantages because copying then becomes easy. But I also end up with a bloated class that contains info that is irrelevant for some objects -- such as whether or not to include those brackets around the matrix. But if I use a lot of different classes, copying properties becomes a real pain. If it matters, this is all in Objective C, for an iOS environment. Any pointers would be greatly appreciated.

    Read the article

  • How to diagnose computer lockups and freezes?

    - by Scott Mitchell
    I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6 MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256 MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4 GB (2 x 2 GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Resolution I have never did figure out the particular problems, but based on the suggestions here and elsewhere, I'm presuming it was a motherboard issue. In any event, I recently upgraded my system, buying a new motherbeard, PSU, CPU, and RAM, and that new rig has been working splendidly the past several weeks. I am using the same graphic cards as in the old setup, so I think it's safe to reason that they weren't the cause of the problem.

    Read the article

  • No wireless connection using a conceptronic c54i (RT2561/RT61 rev B)

    - by jrosell
    Detected but not working. New install on ubuntu 11.10 using coneptronic C54Ri. As documentation says it uses Ralink drivers.... Any ideas why my wireless does not work? $ lspci -nn | grep -i 'ralink' 01:05.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:90:e5:af:13 inet addr:192.168.0.197 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::21e:90ff:fee5:af13/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28361 errors:0 dropped:0 overruns:0 frame:0 TX packets:16858 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:39812172 (39.8 MB) TX bytes:1633405 (1.6 MB) Interrupt:43 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6608 (6.6 KB) TX bytes:6608 (6.6 KB) iwconfig wlan0 wlan0 IEEE 802.11abg ESSIDff/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thrff Fragment thrff Power Managementff lsmod | grep rt rt61pci 27493 0 crc_itu_t 12627 1 rt61pci rt2x00pci 14202 1 rt61pci rt2x00lib 48114 2 rt61pci,rt2x00pci mac80211 272785 2 rt2x00pci,rt2x00lib cfg80211 172392 2 rt2x00lib,mac80211 eeprom_93cx6 12653 1 rt61pci parport_pc 32114 1 parport 40930 3 ppdev,parport_pc,lp lsmod | grep rt [ 2497.816989] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.827112] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.837430] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847528] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847632] phy0 -> rt61pci_wait_bbp_ready: Error - BBP register access faile d, aborting. [ 2497.847637] phy0 -> rt61pci_set_device_state: Error - Device failed to enter state 4 (-5). sudo lshw -C network *-network DISABLED description: Wireless interface product: RT2561/RT61 rev B 802.11g vendor: Ralink corp. physical id: 5 bus info: pci@0000:01:05.0 logical name: wlan0 version: 00 serial: fa:b8:14:58:62:35 width: 32 bits clock: 33MHz capabilities: pm cap_list ethernet physical wireless configuration: broadcast=yes driver=rt61pci driverversion=3.0.0-12-generic firmware=0.8 latency=0 link=no multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:fdef8000-fdefffff iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan0 Failed to read scan data : Network is down uname -mr 3.0.0-12-generic i686 Edit 1 $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no On reboot, sudo lshw -C network returns network is ok. Hovever, WPA keeps on asking the wireless key

    Read the article

  • What are these errors when I try to "make" the driver of my wireless network?

    - by Tom Brito
    I got got a wireless to usb adapter, and I'm having some trouble to install the drivers on Ubuntu. First of all, the readme file say to use the "make" command, and I already got errors: $ make make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’: /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12325: error: ‘struct net_device’ has no member named ‘open’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12326: error: ‘struct net_device’ has no member named ‘stop’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12327: error: ‘struct net_device’ has no member named ‘tx_timeout’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12328: error: ‘struct net_device’ has no member named ‘do_ioctl’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12329: error: ‘struct net_device’ has no member named ‘set_multicast_list’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12330: error: ‘struct net_device’ has no member named ‘set_mac_address’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12331: error: ‘struct net_device’ has no member named ‘get_stats’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12332: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ make[2]: *** [/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o] Error 1 make[1]: *** [_module_/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [all] Error 2 /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/ is the path where I copied the drivers on my computer. Any idea how to solve this? (I don't even know what the error is...) update: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 03 serial: 78:e3:b5:e7:5f:6e size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:42 ioport:d800(size=256) memory:fbeff000-fbefffff memory:faffc000-faffffff memory:fbec0000-fbedffff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:26:18:a1:ae:64 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=802.11b/g

    Read the article

  • What shall I include in a 10 week web technologies course?

    - by Iain
    In September I will be teaching a university module on web technologies. This session will be available to 1st year (freshman) students who don't necessarily have any programming knowledge or know how the web works. In the 2nd semester I will be teaching Flash, which is my specialism, so I know exactly what I am going to teach, but in the 1st semester I will be teaching them web standards technologies - HTML, CSS, JS, jQuery, PHP and MySQL. Where I need advice is how to proportion the emphasis for each part, and which parts of each technology to cover. Another real issue I'm struggling with is how much of the bad old ways should I teach them? Do they need to know about bold as well as strong, etc. UPDATE: based, on your feedback I will only be teaching the latest version of everything - CSS3, HTML5 etc. I'm not sure exactly how long the semester will be but I'm guessing about 10-12 weeks. Each session is a 2 hour lab. Obviously there's only so much I can cover in that time and it will be up to the students to go a research this stuff properly on W3 schools etc. My ideas so far were: Lesson 0 - Course intro and overview of the current tech landscape. What is out there, what will we be learning, what won't we. What is a web server, URL etc. Looking at different example websites and discussing how they work. Lesson 1 - HTML basics (head, body, title, img, table, a, lists, h1, strong etc) Lesson 2 - CSS for styling and layout - fonts, webfonts, float etc Lesson 3 - Intro to programming JS (variables, loops, conditionals, functions) Lesson 4 - more JS programming fundamentals, DOM manipulation Lesson 5 - jQuery - making things fly about and look cool Lesson 6 - XML and Ajax Lesson 7 - PHP basics - syntax, server-side principles Lesson 8 - PHP and MySQL - forms, logins, saving user info Lesson 9 - don't know Lesson 10 - don't know Please let me know if you think this is the right order, what have I missed, how to use any spare sessions etc. Thanks :) UPDATE BASED ON RESPONSES: Thanks for all your responses - some great stuff. To be absolutely clear, this is not a computer science course, it is a practical module on a creative technology course. The emphasis definitely has to be on making cool things work rather than understanding how the backbone of the internet works. That can come later, if the students are interested. At the end of the module I would like the students to be able to produce a web page or pages that does something cool, using some or all of the technologies I cover. Many of these topics are of course far beyond the scope of a 2 hour session, however I do not have the option of reducing the syllabus, I will just have to explain what the technology does and encourage the student to research it in their own time.

    Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >