Search Results

Search found 11068 results on 443 pages for 'print preview'.

Page 406/443 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

  • how to diagnosis and resolve: /usr/lib64/libz.so.1: no version information available

    - by matchew
    I had a hell of a time installing lxml for python2.7 on centOs5.6. For some background, python2.7 is an alternative installation of python on centOS5.6 which comes with python2.4 installed. it was bulit from source per its instrucitons ./configure make make altinstall However, after about 20 hours of trying I managed to find a workable solution and was able to install lxml. Until, I notice the following error at the top of the interpreter: python2.7: /usr/lib64/libz.so.1: no version information available (required by python2.7) Python 2.7.2 (default, Jun 30 2011, 18:55:26) [GCC 4.1.2 20080704 (Red Hat 4.1.2-50)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> print 'Sheeeeut!' this error is printed out everytime I run a script. For example: $ ./test.py /usr/local/bin/python2.7: /usr/lib64/libz.so.1: no version information available (required by /usr/local/bin/python2.7) the script runs flawlessly, but this error is bothersome. After some digging I have seem to believe I have a wrong version of libz installed, that it is either an older version or built for a different platform. I'm not quite sure how, I've only installed libz through yum, as far as I know. Although, I can't quite remember every little thing I tried in my twenty hours of trying. You may also be intereted in what my lib64 folder looks like, here is some information $ ls -ltrh libz* -rwxr-xr-x 1 root root 84K Jan 9 2007 libz.so.1.2.3 -rwxr-xr-x 1 root root 107K Jan 9 2007 libz.a -rwxr-xr-x 1 root root 154K Feb 22 23:30 libzdb.so.7.0.2 lrwxrwxrwx 1 root root 13 Apr 20 20:46 libz.so.1 -> libz.so.1.2.3 lrwxrwxrwx 1 root root 15 Jun 30 18:43 libzdb.so.7 -> libzdb.so.7.0.2 lrwxrwxrwx 1 root root 13 Jul 1 11:35 libz.so -> libz.so.1.2.3 lrwxrwxrwx 1 root root 15 Jul 1 11:35 libzdb.so -> libzdb.so.7.0.2 notice: the items that Say Jul 1st or Jun 30th are from me. I had initially moved these files into a backup folder as they seeemed to be 1. duplicates and 2. had a date after/during my problems I alluded to earlier that I had with lxml One inclination is to completely remove python2.7 and re-install. I think having it install to /usr/local/ was a poor default choice. However, without the make uninstall option being present it seems to be a time consuming task for a solution I am not quite sure would solve my problem.

    Read the article

  • HAProxy + Percona XtraDB Cluster

    - by rottmanj
    I am attempting to setup HAproxy in conjunction with Percona XtraDB Cluster on a series of 3 EC2 instances. I have found a few tutorials online dealing with this specific issue, but I am a bit stuck. Both the Percona servers and the HAproxy servers are running ubuntu 12.04. The HAProxy version is 1.4.18, When I start HAProxy I get the following error: Server pxc-back/db01 is DOWN, reason: Socket error, check duration: 2ms. I am not really sure what the issue could be. I have verified the following: EC2 security groups ports are open Poured over my config files looking for issues. I currently do not see any. Ensured that xinetd was installed Ensured that I am using the correct ip address of the mysql server. Any help with this is greatly appreciated. Here are my current config Load Balancer /etc/haproxy/haproxy.cfg global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 4096 user haproxy group haproxy debug #quiet daemon defaults log global mode http option tcplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 frontend pxc-front bind 0.0.0.0:3307 mode tcp default_backend pxc-back frontend stats-front bind 0.0.0.0:22002 mode http default_backend stats-back backend pxc-back mode tcp balance leastconn option httpchk server db01 10.86.154.105:3306 check port 9200 inter 12000 rise 3 fall 3 backend stats-back mode http balance roundrobin stats uri /haproxy/stats MySql Server /etc/xinetd.d/mysqlchk # default: on # description: mysqlchk service mysqlchk { # this is a config for xinetd, place it in /etc/xinetd.d/ disable = no flags = REUSE socket_type = stream port = 9200 wait = no user = nobody server = /usr/bin/clustercheck log_on_failure += USERID #only_from = 0.0.0.0/0 # recommended to put the IPs that need # to connect exclusively (security purposes) per_source = UNLIMITED } MySql Server /etc/services Added the line mysqlchk 9200/tcp # mysqlchk MySql Server /usr/bin/clustercheck # GNU nano 2.2.6 File: /usr/bin/clustercheck #!/bin/bash # # Script to make a proxy (ie HAProxy) capable of monitoring Percona XtraDB Cluster nodes properly # # Author: Olaf van Zandwijk <[email protected]> # Documentation and download: https://github.com/olafz/percona-clustercheck # # Based on the original script from Unai Rodriguez # MYSQL_USERNAME="testuser" MYSQL_PASSWORD="" ERR_FILE="/dev/null" AVAILABLE_WHEN_DONOR=0 # # Perform the query to check the wsrep_local_state # WSREP_STATUS=`mysql --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} -e "SHOW STATUS LIKE 'wsrep_local_state';" 2>${ERR_FILE} | awk '{if (NR!=1){print $2}}' 2>${ERR_FILE}` if [[ "${WSREP_STATUS}" == "4" ]] || [[ "${WSREP_STATUS}" == "2" && ${AVAILABLE_WHEN_DONOR} == 1 ]] then # Percona XtraDB Cluster node local state is 'Synced' => return HTTP 200 /bin/echo -en "HTTP/1.1 200 OK\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is synced.\r\n" /bin/echo -en "\r\n" else # Percona XtraDB Cluster node local state is not 'Synced' => return HTTP 503 /bin/echo -en "HTTP/1.1 503 Service Unavailable\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is not synced.\r\n" /bin/echo -en "\r\n" fi

    Read the article

  • Can't connect to shared folders anymore?

    - by HuskyHuskie
    My home server is running Windows Server 2008 R2. I've had it running for almost a year now without any issues with shared folders. This past week I had an issue with my modem which required it to be power cycled and with that I power cycled my router. After that I haven't been able to connect to my shared network folders. I have no idea why that would even cause an issue as I've power cycled my networking equipment in the past without issues and none of my settings appear to have been lost. I am mapping these drives on my Windows 7 Ultimate machine using "Map Network Drive", from there I enter \\SERVER\Storage as I'm trying to connect to my shared folder named Storage. I receive the following error every time I try mapping the drive: Windows cannot access \\Server\Storage Check the spelling of the name. Otherwise there might be a problem with your network. To try to identify and resolve network problems, click Diagnose. Details: Error code: 0x80070035 The network path was not found. When I click Diagnose I get the following: Problems found file and print sharing resource (SERVER) is online but isn't responding to connection attempts. The remote computer isn't responding to connection on port 445, possibly due to firewall or security policy settings, or because it might be temporarily unavailable. Windows couldn't find any problems with the firewall on your computer. I've tried this from multiple computers with the same issue too. To resolve the problems so far I've tried: Disabling the firewall on SERVER Reinstalling File Services Modifying NetBT\Parameters registry values Adding a custom inbound rule for port 445 Adding port forwarding on my router for port 445 Recreating the shared folders Checking and rechecking the shared folder permissions. Resetting my user account password on the server used to access the shared folder. I'm pulling my hair out with this problem mainly because it came out of nowhere. It was working fine the night before and the next day it just stopped working. Any ideas of what I could try next are much appreciated. It should also be noted that this server is used as a web server too and that functionality still works correctly.

    Read the article

  • Too many TIME_WAIT state connections!

    - by Hamza
    I've been reading about this everywhere all day, and from what I've gathered, TIME_WAIT is a relatively harmless state. It's supposed to be harmless even when there's too many. But if they're jumping to the numbers I've been seeing for the past 24 hours, something is really wrong! [root@1 ~]# netstat -nat | awk '{print $6}' | sort | uniq -c | sort -n 1 established) 1 Foreign 12 CLOSE_WAIT 15 LISTEN 64 LAST_ACK 201 FIN_WAIT2 334 CLOSING 605 ESTABLISHED 816 SYN_RECV 981 FIN_WAIT1 26830 TIME_WAIT That number fluctuates from 20,000 to 30,000+ (so far, the maximum I've seen it go is 32,000). What worries me is that they're all different IP addresses from all sorts of random locations. Now this is supposed to be (or was supposed to be) a DDoS attack. I know this for a fact, but I won't go into the boring details. It started out as a DDoS and it did impact my server's performance for a couple minutes. After that, everything was back to normal. My server load is normal. My internet traffic is normal. No server resource is being abused. My sites load fine. I also have IPTABLES disabled. There's an odd issue with that too. Every time I enable the firewall/iptables, my server starts experiencing packet loss. Lots of it. About 50%-60% packets are lost. It happens within an hour or within a few hours of enabling the firewall. As soon as I disable it, ping responses from all locations I test them from start clearing up and get stable again. Very strange. The TIME_WAIT state connections have been fluctuating at those numbers since yesterday. For 24 hours now, I've had that, and although it hasn't impacted performance in any way, it's disturbing enough. My current tcp_fin_timeout value is 30 seconds, from the default 60 seconds. However, that seems to not help, at all. Any ideas, suggestions? Anything at all would be appreciated, really!

    Read the article

  • Basic OpenVPN setup not working

    - by WalterJ89
    I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You EDIT it seems on the server the openvpn-status.log has the routes for the client SERVER OpenVPN CLIENT LIST Updated,Wed May 19 18:26:32 2010 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since client,192.168.10.102:50517,19157,20208,Wed May 19 17:38:25 2010 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.0.6,client,192.168.10.102:50517,Wed May 19 17:38:56 2010 GLOBAL STATS Max bcast/mcast queue length,0 END Also this is from the client.log file: Which seems to be correct C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.5 Another EDIT 'route print' on the server shows the route: Destination Mask Gateway Interface 10.8.0.0 255.255.255.0 10.8.0.2 10.8.0.1 the same on the client shows 10.8.0.0 255.255.255.0 10.8.0.5 10.8.0.6 So the routes are there.. what can the problem be? Is there anything wrong with my configs? Why would OpenVPN be having problems communicating?

    Read the article

  • pix 501, static route to d-link router (different subnet)

    - by ra170
    I have pix 501 cisco firewall with internal ip 192.168.10.1. I have connected d-link router (dir-655) to pix 501. The d-link router has internal ip 192.168.0.1 The picture would like something like that: |pix 501| has 192.168.10.1 ip |DIR-655| has 192.168.0.1 ip 1. |cable modem|----|pix 501|-------|DIR-655|-----PC 2. PC--------|pix 501|---------|DIR-655| | | |cable modem| When I'm on the wireless network (dir-655) with assigned ip of 192.168.0.x I can cross the subnet and connect to my firewall 192.168.10.1. (pic. 1) The problem is that if I'm on the 192.168.10.x network I can't connect to anything over at 192.168.0.x network. (pic.2) I've tried entering a static route like this: `route inside 192.168.0.0 255.255.255.0 192.168.10.1 1` I also tried assigning static ip to wan interface on DIR-655 to 192.168.10.30 and then tried this: route inside 192.168.0.0 255.255.255.0 192.168.10.30 1 But still, can't connect to 192.168.0.1 or anything on that subnet. Is there a way to setup a static route? Would adding a separate router between PIX 501 and DIR-655 help? I would think that static route like this should take care of it, but it doesn't. This is my route config and nat: (config)# sh route outside 0.0.0.0 0.0.0.0 (outside_IP) 1 DHCP static outside (outside_IP) 255.255.248.0 (outside_IP) 1 CONNECT static inside 192.168.0.0 255.255.255.0 192.168.10.1 1 OTHER static inside 192.168.10.0 255.255.255.0 192.168.10.1 1 CONNECT static or (route inside 192.168.0.0 255.255.255.0 192.168.10.30 1) (config)# sh nat nat (inside) 1 192.168.1.0 255.255.255.0 0 0 nat (inside) 1 192.168.10.0 255.255.255.0 0 0 nat (inside) 1 0.0.0.0 0.0.0.0 0 0 I ended up turning DIR-655 into an Access Point (turning off DHCP and pluging cable from PIX lan interface into one of the LAN interfaces on DIR-655, and leaving WAN port empty), that works as far as DIR-655 being on the same subnet now, and I can access every machine. However the question is, why can't I simply route between those two? would router between these two help? One of the reasons is, that the PIX 501 has only 10 licences, so now I'm using almost all of them. (I have few computers, iphones, ps3, print server, etc.) I would really appreciate some help! Thanks.

    Read the article

  • How is DNS used by individual processes?

    - by atroon
    When resolving FQDNs or machine names to IP addresses on my local network (mycompany.internal) I can use dig on the command line (linux/mac) or nslookup (windows) to query the configured server and get a response. But trying to enter the FQDN or even just the machine name in a ping command or in a web browser results in 'Unknown Host' or DNS errors. Here's a sample, this one from the Mac: mac:~ atroon$ dig server.mycompany.internal ; <<>> DiG 9.6.0-APPLE-P2 <<>> server.mycompany.internal ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 5219 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;server.mycompany.internal. IN A ;; ANSWER SECTION: server.mycompany.internal. 1200 IN A 172.16.254.36 ;; Query time: 0 msec ;; SERVER: 172.16.254.8#53(172.16.254.8) ;; WHEN: Wed Dec 16 11:39:15 2009 ;; MSG SIZE rcvd: 55 mac:~ atroon$ ping server.mycompany.internal<br> ping: cannot resolve server.mycompany.internal: Unknown host I cannot for the life of me figure this one out. The DNS server is a SBS 2003 box which handles AD, some file/print, etc for a small company network. This issue happens to me about three times a week, and when I'm connected to the local network directly, the same switch as the server even. I can make any connection I want with IP addresses, I just can't make DNS work. Additionally, at the same time I'm experiencing this, other users are fine, which makes me think it's a problem on my Mac. But what sort of problem? How can dig send a query and get a reply, and ping say 'unknown host'? I'm posting here vs. serverfault because I think this is a local problem not a server problem...but if anyone can point me at the server, I guess we'll head down the street a domain or two.

    Read the article

  • Suggestions for splitting server roles amongst Hyper-V virtual servers / RAID6 or RAID10? / AppAssure

    - by Anon
    We have 2 Hyper-V hosts at present running 1 virtual server that was converted from a physical box running all roles. My plan is to split the roles over various virtual machines, upgrading to the latest software versions as I go, and use the backup server as a standby in case the main server fails. AppAssure backup software has a feature called Virtual Standby, so the VHD's can be ready to be fired up on the backup server if necessary. Off-site backups will be done via external USB drive for now. I'm just seeking some input/suggestions into how I'm planning to split the roles out amongst various virtual servers. Also, I'm curious how to setup the storage on the servers. We do not have any NAS's, SAN'S or any budget for this. What would the best RAID level be to use? I'm thinking either RAID6 (which is currently used) however I'm concerned about the write speeds, or RAID10 but again I'm worried that I can only lose 1 drive (from the same mirror) as opposed to any 2 with RAID6. I realise I have a hot swap for this, but what if a further drive fails during a rebuild? Is the write penalty of RAID6 worth the extra reliability over RAID10? Or will it be too slow with all the roles I am planning, therefore RAID10 is my only real option? The reason for the needed redundancy is I am the only technician and I'm not always on-site. Options I've considered: 1) 5 drives in RAID6 set, 200gb for host OS, rest for VM storage. 1 drive for hot swap - this is how it is currently setup 2) 4 drives in RAID10 set, 200gb for host OS, rest for VM storage. 2 drives for hot swap 3) 4 drives in RAID10 set for VM storage, 2 drives in RAID1 set for host OS. No drives for hot swap - While this is probably the best option with the amount of drives I have, I don't like the idea of having no hot swap 4) 3 drives in RAID6 set for VM storage, 2 drives in RAID1 set for host OS. 1 drive for hot swap All options give us enough storage capacity for our files, etc. We don't have any budget for extra drives or extra hot swap HD chassis for the servers. We have about 70 clients and about 150 users. MAIN SERVER Intel Xeon 5520 @ 2.27 GHz (2 processors) 16GB RAM 6 x 1TB Seagate Barracuda ES.2 Enterprise SATA drives Intel SRCSATAWB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: DC01 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM DC02 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM Member Server - DHCP server, File server, Print server - 1GB RAM SCCM Member Server - 4GB RAM Third Party Software Member Server - A/V server, Ticketing software, etc - 4GB RAM Exchange 2007 - 4GB RAM - however we are probably migrating to a hosted solution, therefore freeing up resources BACKUP SERVER Intel Xeon E5410 @ 2.33GHz (2 processors) 16GB RAM 6 x 2TB WD RE4 SATA drives Intel SRCSASRB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: AppAssure backup software - 8GB RAM

    Read the article

  • Linux filesystem with inodes close on the disk

    - by pts
    I'd like to make the ls -laR /media/myfs on Linux as fast as possible. I'll have 1 million files on the filesystem, 2TB of total file size, and some directories containing as much as 10000 files. Which filesystem should I use and how should I configure it? As far as I understand, the reason why ls -laR is slow because it has to stat(2) each inode (i.e. 1 million stat(2)s), and since inodes are distributed randomly on the disk, each stat(2) needs one disk seek. Here are some solutions I had in mind, none of which I am satisfied with: Create the filesystem on an SSD, because the seek operations on SSDs are fast. This wouldn't work, because a 2TB SSD doesn't exist, or it's prohibitively expensive. Create a filesystem which spans on two block devices: an SSD and a disk; the disk contains file data, and the SSD contains all the metadata (including directory entries, inodes and POSIX extended attributes). Is there a filesystem which supports this? Would it survive a system crash (power outage)? Use find /media/myfs on ext2, ext3 or ext4, instead of ls -laR /media/myfs, because the former can the advantage of the d_type field (see in the getdents(2) man page), so it doesn't have to stat. Unfortunately, this doesn't meet my requirements, because I need all file sizes as well, which find /media/myfs doesn't print. Use a filesystem, such as VFAT, which stores inodes in the directory entries. I'd love this one, but VFAT is not reliable and flexible enough for me, and I don't know of any other filesystem which does that. Do you? Of course, storing inodes in the directory entries wouldn't work for files with a link count more than 1, but that's not a problem since I have only a few dozen such files in my use case. Adjust some settings in /proc or sysctl so that inodes are locked to system memory forever. This would not speed up the first ls -laR /media/myfs, but it would make all subsequent invocations amazingly fast. How can I do this? I don't like this idea, because it doesn't speed up the first invocation, which currently takes 30 minutes. Also I'd like to lock the POSIX extended attributes in memory as well. What do I have to do for that? Use a filesystem which has an online defragmentation tool, which can be instructed to relocate inodes to the the beginning of the block device. Once the relocation is done, I can run dd if=/dev/sdb of=/dev/null bs=1M count=256 to get the beginning of the block device fetched to the kernel in-memory cache without seeking, and then the stat(2) operations would be fast, because they read from the cache. Is there a way to lock those inodes and/or blocks into memory once they have been read? Which filesystem has such a defragmentation tool?

    Read the article

  • open source knowledge base CMS system

    - by Thomi
    I'm looking for an open source knowledge base system that uses tags, rather than free-text search to identify articles (a lot like serverfault does). I've looked at twiki, which many people suggested, but haven't found what I'm looking for. Basically I want to be able to create and tag articles, and provide an easy way for anonymous users to search based on tags. Edit: OK, here's some more detail regarding what I want. Basically, all the knowledge base systems I have seen so far are a collection of articles, each article with a title. Most of them allow you to categorise articles into groups and sub-groups. Users of the system can search for information using a title search, for example "How do I print from AwesomeProduct?" - which then shows a list of any articles that match that search text. This is fine and dandy when your KB is for one version of the software product (the mythical AwesomeProduct ver 1.0). However, the development team then go ahead and create a new version (ver 2.0) that adds many new features and changes some existing features. Now, how do we support both products in the same KB? The Naive method is to copy all articles from 1.0, and update them for 2.0, adding and removing articles in 2.0 as required. We can then add text at the top of every 1.0 article that says: "this articles applies to 1.0 only, to see the 2.0 version, click here" (or something similar) The problem with articles being indexed in the system by title is that it's very hard to filter based on meta-data like version. What happens when we create version 3.0 or 4.0? The end-situation here is that you have a mess of articles. They're hard to search, hard to filter, and even harder to manage. The solution (it seems to me) is to use tags, rather than text as the article index mechanism. So articles can be tagged with a tag representing the software version, topic area etc. etc. Users can then filter based on tag - an example search might be "version_1 printing" - which straight away gives a list of articles with all these tags. So that's what I'm looking for - a KB system that uses tags, rather than text to index many articles. I'm sure I could build something with drupal, but I was hoping for something that worked out-of-the-box.

    Read the article

  • 2xAMD Opteron 6128 with libvirt, Physical CPU 13 doesn't exist

    - by yak
    I need help with libvirt(?) problem. Server specs: ProLiant DL165 G7 2x AMD Opteron(tm) Processor 6128 System: Debian GNU/Linux testing (wheezy) 3.2.0-3-amd64 libvirt 0.9.12-5 kvm 1:1.1.2+dfsg-2 $ grep processor /proc/cpuinfo | wc -l 16 $ virsh nodeinfo setlocale: No such file or directory CPU model: x86_64 CPU(s): 16 CPU frequency: 800 MHz CPU socket(s): 2 Core(s) per socket: 4 Thread(s) per core: 1 NUMA cell(s): 1 Memory size: 66114200 KiB $ virsh capabilities .. <topology> <cells num='4'> <cell id='0'> <cpus num='4'> <cpu id='0'/> <cpu id='1'/> <cpu id='2'/> <cpu id='3'/> </cpus> </cell> <cell id='1'> <cpus num='4'> <cpu id='4'/> <cpu id='5'/> <cpu id='6'/> <cpu id='7'/> </cpus> </cell> <cell id='2'> <cpus num='4'> <cpu id='12'/> <cpu id='13'/> <cpu id='14'/> <cpu id='15'/> </cpus> </cell> <cell id='3'> <cpus num='4'> <cpu id='8'/> <cpu id='9'/> <cpu id='10'/> <cpu id='11'/> </cpus> </cell> </cells> </topology> .. $ virsh vcpupin vm 0 13,12,11,10,9,8,7,6,5 error: Physical CPU 13 doesn't exist. error: cpulist: Invalid format. Question? Why my VM Guests use only first 8 CPUs and next 8 are idling? $ for host in virsh list | awk '{print $2}'; do virsh vcpuinfo $host; done | grep ^CPU: | sort | uniq CPU: 0 CPU: 1 CPU: 2 CPU: 3 CPU: 4 CPU: 5 CPU: 6 CPU: 7 Any ideas how to change it?

    Read the article

  • Nagios core Event Handler not working

    - by sivashanmugam
    Nagios Event Handler is not triggering when the service is taking more time to response or down. My configuration in below nagios.cfg enable_event_handlers=1 localhost.cfg define service { use generic-service host_name Server service_description test-server servicegroups test-service check_command check-service is_volatile 0 check_period 24x7 max_check_attempts 4 normal_check_interval 2 retry_check_interval 2 contact_groups testcontacts notification_period 24x7 notification_options w,u,c,r notifications_enabled 1 event_handler_enabled 1 event_handler recheck-service } command.cfg define command{ command_name recheck-service command_line /usr/local/nagios/libexec/alert.sh $SERVICESTATE$ $SERVICESTATETYPE$ $SERVICEATTEMPT$ } alert.sh file !/bin/sh set -x case "$1" in OK) # The service just came back up, so don't do anything... ;; WARNING) # We don't really care about warning states, since the service is probably still running... ;; UNKNOWN) # We don't know what might be causing an unknown error, so don't do anything... ;; CRITICAL) Aha! The HTTP service appears to have a problem - perhaps we should restart the server... Is this a "soft" or a "hard" state? case "$2" in We're in a "soft" state, meaning that Nagios is in the middle of retrying the check before it turns into a "hard" state and contacts get notified... SOFT) # What check attempt are we on? We don't want to restart the web server on the first check, because it may just be a fluke! case "$3" in Wait until the check has been tried 3 times before restarting the web server. If the check fails on the 4th time (after we restart the web server), the state type will turn to "hard" and contacts will be notified of the problem. Hopefully this will restart the web server successfully, so the 4th check will result in a "soft" recovery. If that happens no one gets notified because we fixed the problem! 3) echo -n "Going To Ping the Virtual Machine (3rd soft critical state)..." # Call the init script to restart the HTTPD server myresult=`/usr/local/nagios/libexec/check_http xyz.com -t 100 | grep 'time'| awk '{print $10}'` echo "Your Service Is taking the following time Delay" "$myresult Seconds" |mail -s "WARNING : Service Taken More Time To Response" [email protected] ;; esac ;; # The HTTP service somehow managed to turn into a hard error without getting fixed. # It should have been restarted by the code above, but for some reason it didn't. # Let's give it one last try, shall we? # Note: Contacts have already been notified of a problem with the service at this

    Read the article

  • UNIX Question to b answered??? [closed]

    - by Nits
    Create a tree structure named ‘training’ in which there are 3 subdirectories – ‘level 1’,’ level2’ and ‘cep’. Each one is again further divided into 3. The ‘level 1’ is divided into ‘sdp’, ‘re’ and ‘se’. From the subdirectory ‘se’ how can one reach the home directory in one step and also how to navigate to the subdirectory ‘sdp’ in one step? Give the commands, which do the above actions? How will you copy a directory structure dir1 to dir2 ? (with all the subdirectories) How can you find out if you have the permission to send a message? Find the space occupied ( in Bytes) by the /home directory including all its subdirectories. What is the command for printing the current time in 24-hour format? What is the command for printing the year, month, and date with a horizontal tab between the fields? Create the following files: chapa, chapb, chapc, chapd, chape, chapA, chapB, chapC, chapD, chapE, chap01, chap02, chap03, chap04, chap05, chap11, chap12, chap13, chap14, and chap15. With reference to question 7, What is the command for listing all files ending in small letters? With reference to question 7, What is the command for listing all files ending in capitals? With reference to question 7, What is the command for listing all files whose last but one character is 0? With reference to question 7, What is the command for listing all files which end in small letters but not ‘a’ and ‘c’? In an organisation one wants to know how many programmers are there. The employee data is stored in a file called ‘personnel’ with one record per employee. Every record has field for designation. How can grep be used for this purpose? In the organisation mentioned in question 12 how can sed be used to print only the records of all employees who are programmers. In the organisation mentioned in question 12 how can sed be used to change the designation ‘programmer’ to ‘software professional’ every where in the ‘personnel’ file Find out about the sleep command and start five jobs in the background, each one sleeping for 10 minutes. How do you get the status of all the processes running on the system? i.e. using what option?

    Read the article

  • Exchange-Server Query

    - by Rudi Kershaw
    First, a little background. I've recently been taken on as a web and software developer for a small company, who has no other in-house IT support. They've been asking my opinion on lots of IT subjects that are quite far out of my comfort zone. I'm definitely not a network admin. Their IT consultancy contractor is pushing them to upgrade their dedicated exchange server, even though it seems like the one they currently have has a lot of life left in it and is running problem free. They say it's "coming to the natural end of it's life". They want to install a monster with a Xeon E5-2420, 32GB RAM, 2x 1TB HDDs, Windows Server 2012 and Microsoft Exchange 2010. They want to charge a small fortune for it. Basically, this system seems massively over the top seeing as it won't be doing anything else other than running as an exchange server for a company with less than 25 email accounts. My employers also have a file server system in-house that hosts three web apps, an SQL server, their local domain, print server and shared folders. That machine is using the same specs as the proposed new one, and it is barely using any of it's potential. I asked if Microsoft Exchange 2010 could be installed on their file server, but they said that MS Exchange can't run on the same system as an SQL server because for some reason they will eat up each others resources (even though the SQL server isn't touching 1% of the current system's CPU or RAM). My question is really, are they trying to rip my employers off? Could MS Exchange be installed on their other server (on a virtual instance or not), or does the old one even need replacing at all? Going with their current suggestion will cost the company in excess of £6k, and it seems entirely unnecessary. I apologies, because I know this is probably a little thin on details, but if I carry on I could end up writing a massive essay that no-one will want to read. I've been doing my research, but I'm not knowledgeable enough make any hard decisions. Let me know if you need any more details. Thank you for any help you can offer. Further Details: The new exchange would need to support Outlook Web App, 25 users, a few public mailboxes, and email exchange with Blackberries.

    Read the article

  • Why is Windows 7 not following all routes?

    - by GigabyteProductions
    My computer is connected to my secondary router that's running the 192.168.42.0/24 network and my computer also has a route that directs anything on that network to the router, but for anything on that network other than the router itself, it get's the ICMP response of Reply from 192.168.42.194: Destination host unreachable. (with 192.168.42.194 being my computer). Every other network works, like all of the internet, or addresses on my primary router like 192.168.1.*, just not on the 192.168.42.0/24 network... route print returns: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.42.1 192.168.42.194 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.42.0 255.255.255.0 On-link 192.168.42.194 276 192.168.42.194 255.255.255.255 On-link 192.168.42.194 276 192.168.42.255 255.255.255.255 On-link 192.168.42.194 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.42.194 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.42.194 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.42.1 Default =========================================================================== The only time anything is supposed to send an ICMP Host Unreachable response is when there's no route to it, right? So, why is my own computer sending that to ping or tracert when I have the route of 192.168.42.0 with the mask of 255.255.255.0? An IP address of 192.168.42.2 surely fits into that route. If I explicitly add a route for the IP address i am trying to access, it works, like: route add 192.168.42.2 mask 255.255.255.255 192.168.42.1 (the 192.168.42.1 right after mask is gateway, or the device to send the packet to so it can route it further), but why wont it work for the implicit route that's automatically on the table? I disabled my firewall, too (I use Comodo if anyone thinks this still serves as a problem). I'v even tried explicitly adding the gateway of 192.168.42.1 to the 192.168.42.0/24 route instead of it routing through 0.0.0.0's gateway, which is what On-link does. but that didn't work either, so it's not a gateway specification problem. If the host was really unreachable, it would be the router's IP address (192.168.42.1) sending that to me... This network is all of my creation, so there's no problem such as an administrator locking me out, because i am the administrator.

    Read the article

  • Create text file named after a cell containing other cell data

    - by user143041
    I tried using the code below for the Excel program on my `Mac Mini using the OS X Version 10.7.2 and it keeps saying Error due to file name / path: (The Excel file I am creating is going to be a template with my formulas and macros installed which will be used over and over). Sub CreateFile() Do While Not IsEmpty(ActiveCell.Offset(0, 1)) MyFile = ActiveCell.Value & ".txt" fnum = FreeFile() Open MyFile For Output As fnum Print #fnum, ActiveCell.Offset(0, 1) & " " & ActiveCell.Offset(0, 2) Close #fnum ActiveCell.Offset(1, 0).Select Loop End Sub What Im trying to do: 1st Objective I would like to have the following data to be used to create a text file. A:A is what I need the name of the file to be. B:2 is the content I need in the text file. So, A2 - "repair-video-game-Glassboro-NJ-08028.txt" is the file name and B2 to be the content in the file. Next, A3 is the file name and B3 is the content for the file, etc. ONCE the content reads what is in cell A16 and B16 (length will vary), the file creation should stop, if not then I can delete the additional files created. This sheet will never change. Is there a way to establish the excel macro to always go to this sheet instead of have to select it with the mouse to identify the starting point? 2nd Objective I would like to have the following data to be used to create a text file. A:1 is what I need the name of the file to be. B:B is the content I want in the file. So, A2 - is the file name "geo-sitemap.xml" and B:B to be the content in the file (ignore the .xml file extension in the photo). ONCE the content cell reads what is in cell "B16" (length will vary), the file creation should stop, if not then I can adjust the cells that have need content (formulated content you see in the image is preset for 500 rows). This sheet will never change. Is there a way to establish the excel macro to always go to this sheet instead of have to select it with the mouse to identify the starting point? I can Provide the content in the cells that are filled in by excel formulas that are not not to be included in the .txt files. It is ok if it is not possible. I can delete the extra cells that are not populated (based on the data sheet). Please let me know if you need any more additional information or clarity and I will be happy to provide it.

    Read the article

  • using Silverlight 3's HtmlPage.Window.Navigate method to reuse an already open browser window

    - by Phil
    Hi, I want to use an external browser window to implement a preview functionality in a silverlight application. There is a list of items and whenever the user clicks one of these items, it's opened in a separate browser window (the content is a pdf document, which is why it is handled ouside of the SL app). Now, to achieve this, I simply use HtmlPage.Window.Navigate(new Uri("http://www.bing.com")); which works fine. Now my client doesn't like the fact that every click opens up a new browser window. He would like to see the browser window reused every time an item is clicked. So I went out and tried implementing this: Option 1 - Use the overload of the Navigate method, like so: HtmlPage.Window.Navigate(new Uri("http://www.bing.com"), "foo"); I was assuming that the window would be reused when the same target parameter value (foo) would be used in subsequent calls. This does not work. I get a new window every time. Option 2 - Use the PopupWindow method on the HtmlPage HtmlPage.PopupWindow(new Uri("http://www.bing.com"), "blah", new HtmlPopupWindowOptions()); This does not work. I get a new window every time. Option 3 - Get a handle to the opened window and reuse that in subsequent calls private HtmlWindow window; private void navigationButton_Click(object sender, RoutedEventArgs e) { if (window == null) window = HtmlPage.Window.Navigate(new Uri("http://www.bing.com"), "blah"); else window.Navigate(new Uri("http://www.bing.com"), "blah"); if (window == null) MessageBox.Show("it's null"); } This does not work. I tried the same for the PopupWindow() method and the window is null every time, so a new window is opened on every click. I have checked both the EnableHtmlAccess and the IsPopupWindowAllowed properties, and they return true, as they should. Option 4 - Use Eval method to execute some custom javascript private const string javascript = @"var popup = window.open('', 'blah') ; if(popup.location != 'http://www.bing.com' ){ popup.location = 'http://www.bing.com'; } popup.focus();"; private void navigationButton_Click(object sender, RoutedEventArgs e) { HtmlPage.Window.Eval(javascript); } This does not work. I get a new window every time. option 5 - Use CreateInstance to run some custom javascript on the page private void navigationButton_Click(object sender, RoutedEventArgs e) { HtmlPage.Window.CreateInstance("thisIsPlainHell"); } and in my aspx I have function thisIsPlainHell() { var popup = window.open('http://www.bing.com', 'blah'); popup.focus(); } Guess what? This does work. The only thing is that the window behaves a little strange and I'm not sure why: I'm behind a proxy and in all other scenarios I'm being prompted for my password. In this case however I am not (and am thus not able to reach the external site - bing in this case). This is not really a huge issue atm, but I just don't understand what's goign on here. Whenever I type another url in the address bar of the popup window (eg www.google.com) and press enter, it opens up another window and prompts me for my proxy password. As a temporary solution option 5 could do, but I don't like the fact that Silverlight is not able to manage this. One of the main reasons my client has opted for Silverlight is to be protected against all the browser specific hacking that comes with javascript. Am I doing something wrong? I'm definitely no javascript expert, so I'm hoping it's something obvious I'm missing here. Cheers, Phil

    Read the article

  • overriding ctype<wchar_t>

    - by Potatoswatter
    I'm writing a lambda calculus interpreter for fun and practice. I got iostreams to properly tokenize identifiers by adding a ctype facet which defines punctuation as whitespace: struct token_ctype : ctype<char> { mask t[ table_size ]; token_ctype() : ctype<char>( t ) { for ( size_t tx = 0; tx < table_size; ++ tx ) { t[tx] = isalnum( tx )? alnum : space; } } }; (classic_table() would probably be cleaner but that doesn't work on OS X!) And then swap the facet in when I hit an identifier: locale token_loc( in.getloc(), new token_ctype ); … locale const &oldloc = in.imbue( token_loc ); in.unget() >> token; in.imbue( oldloc ); There seems to be surprisingly little lambda calculus code on the Web. Most of what I've found so far is full of unicode ? characters. So I thought to try adding Unicode support. But ctype<wchar_t> works completely differently from ctype<char>. There is no master table; there are four methods do_is x2, do_scan_is, and do_scan_not. So I did this: struct token_ctype : ctype< wchar_t > { typedef ctype<wchar_t> base; bool do_is( mask m, char_type c ) const { return base::do_is(m,c) || (m&space) && ( base::do_is(punct,c) || c == L'?' ); } const char_type* do_is (const char_type* lo, const char_type* hi, mask* vec) const { base::do_is(lo,hi,vec); for ( mask *vp = vec; lo != hi; ++ vp, ++ lo ) { if ( *vp & punct || *lo == L'?' ) *vp |= space; } return hi; } const char_type *do_scan_is (mask m, const char_type* lo, const char_type* hi) const { if ( m & space ) m |= punct; hi = do_scan_is(m,lo,hi); if ( m & space ) hi = find( lo, hi, L'?' ); return hi; } const char_type *do_scan_not (mask m, const char_type* lo, const char_type* hi) const { if ( m & space ) { m |= punct; while ( * ( lo = base::do_scan_not(m,lo,hi) ) == L'?' && lo != hi ) ++ lo; return lo; } return base::do_scan_not(m,lo,hi); } }; (Apologies for the flat formatting; the preview converted the tabs differently.) The code is WAY less elegant. I does better express the notion that only punctuation is additional whitespace, but that would've been fine in the original had I had classic_table. Is there a simpler way to do this? Do I really need all those overloads? (Testing showed do_scan_not is extraneous here, but I'm thinking more broadly.) Am I abusing facets in the first place? Is the above even correct? Would it be better style to implement less logic?

    Read the article

  • asp.net image aspect ratio help

    - by StealthRT
    Hey all, i am in need of some help with keeping an image aspect ratio in check. This is the aspx code that i have to resize and upload an image the user selects. <%@ Page Trace="False" Language="vb" aspcompat="false" debug="true" validateRequest="false"%> <%@ Import Namespace=System.Drawing %> <%@ Import Namespace=System.Drawing.Imaging %> <%@ Import Namespace=System %> <%@ Import Namespace=System.Web %> <SCRIPT LANGUAGE="VBScript" runat="server"> const Lx = 500 ' max width for thumbnails const Ly = 60 ' max height for thumbnails const upload_dir = "/uptest/" ' directory to upload file const upload_original = "sample" ' filename to save original as (suffix added by script) const upload_thumb = "thumb" ' filename to save thumbnail as (suffix added by script) const upload_max_size = 512 ' max size of the upload (KB) note: this doesn't override any server upload limits dim fileExt ' used to store the file extension (saves finding it mulitple times) dim newWidth, newHeight as integer ' new width/height for the thumbnail dim l2 ' temp variable used when calculating new size dim fileFld as HTTPPostedFile ' used to grab the file upload from the form Dim originalimg As System.Drawing.Image ' used to hold the original image dim msg ' display results dim upload_ok as boolean ' did the upload work ? </script> <% randomize() ' used to help the cache-busting on the preview images upload_ok = false if lcase(Request.ServerVariables("REQUEST_METHOD"))="post" then fileFld = request.files(0) ' get the first file uploaded from the form (note:- you can use this to itterate through more than one image) if fileFld.ContentLength > upload_max_size * 1024 then msg = "Sorry, the image must be less than " & upload_max_size & "Kb" else try originalImg = System.Drawing.Image.FromStream(fileFld.InputStream) ' work out the width/height for the thumbnail. Preserve aspect ratio and honour max width/height ' Note: if the original is smaller than the thumbnail size it will be scaled up If (originalImg.Width/Lx) > (originalImg.Width/Ly) Then L2 = originalImg.Width newWidth = Lx newHeight = originalImg.Height * (Lx / L2) if newHeight > Ly then newWidth = newWidth * (Ly / newHeight) newHeight = Ly end if Else L2 = originalImg.Height newHeight = Ly newWidth = originalImg.Width * (Ly / L2) if newWidth > Lx then newHeight = newHeight * (Lx / newWidth) newWidth = Lx end if End If Dim thumb As New Bitmap(newWidth, newHeight) 'Create a graphics object Dim gr_dest As Graphics = Graphics.FromImage(thumb) ' just in case it's a transparent GIF force the bg to white dim sb = new SolidBrush(System.Drawing.Color.White) gr_dest.FillRectangle(sb, 0, 0, thumb.Width, thumb.Height) 'Re-draw the image to the specified height and width gr_dest.DrawImage(originalImg, 0, 0, thumb.Width, thumb.Height) try fileExt = System.IO.Path.GetExtension(fileFld.FileName).ToLower() originalImg.save(Server.MapPath(upload_dir & upload_original & fileExt), originalImg.rawformat) thumb.save(Server.MapPath(upload_dir & upload_thumb & fileExt), originalImg.rawformat) msg = "Uploaded " & fileFld.FileName & " to " & Server.MapPath(upload_dir & upload_original & fileExt) upload_ok = true catch msg = "Sorry, there was a problem saving the image." end try ' Housekeeping for the generated thumbnail if not thumb is nothing then thumb.Dispose() thumb = nothing end if catch msg = "Sorry, that was not an image we could process." end try end if ' House Keeping ! if not originalImg is nothing then originalImg.Dispose() originalImg = nothing end if end if %> What i am looking for is a way to just have it go by the height of what i set it: const Ly = 60 ' max height for thumbnails And have the code for the width just be whatever. So if i had an image... say 600 x 120 (w h) and i used photoshop to change just the height, it would keep it in ratio and have it 300 x 60 (w x h). Thats what i am looking to do with this code here. However, i can not think of a way to do this (or to just leave a wildcard for the width setting. Any help would be great :o) David

    Read the article

  • Using ASP.NET MVC 2 with Ninject 2 from scratch

    - by Rune Jacobsen
    I just did File - New Project last night on a new project. Ah, the smell of green fields. I am using the just released ASP.NET MVC 2 (i.e. no preview or release candidate, the real thing), and thought I'd get off to a good start using Ninject 2 (also released version) with the MVC extensions. I downloaded the MVC extensions project, opened it in VS2008Sp1, built it in release mode, and then went into the mvc2\build\release folder and copied Ninject.dll and Ninject.Web.Mvc.dll from there to the Libraries folder on my project (so that I can lug them around in source control and always have the right version everywhere). I didn't include the corresponding .xml files - should I? Do they just provide intellisense, or some other function? Not a big deal I believe. Anyhoo, I followed the most up-to-date advice I could find; I referenced the DLLs in my MVC2 project, then went to work on Global.asax.cs. First I made it inherit from NinjectHttpApplication. I removed the Application_Start() method, and overrode OnApplicationStarted() instead. Here is that method: protected override void OnApplicationStarted() { base.OnApplicationStarted(); AreaRegistration.RegisterAllAreas(); RegisterRoutes(RouteTable.Routes); // RegisterAllControllersIn(Assembly.GetExecutingAssembly()); } And I also followed the advice of VS and implemented the CreateKernel method: protected override Ninject.IKernel CreateKernel() { // RegisterAllControllersIn(Assembly.GetExecutingAssembly()); return new StandardKernel(); } That is all. No other modifications to the project. You'll notice that the RegisterAllControllersIn() method is commented out in two places above. I've figured I can run it in three different combinations, all with their funky side effects; Running it like above. I am then presented with the standard "Welcome to ASP.NET MVC" page in all its' glory. However, after this page is displayed correctly in the browser, VS shows me an exception that was thrown. It throws in NinjectControllerFactory.GetControllerInstance(), which was called with a NULL value in the controllerType parameter. Notice that this happens after the /Home page is rendered - I have no idea why it is called again, and by using breakpoints I've already determined that GetControllerInstance() has been successfully called for the HomeController. Why this new call with controllerType as null? I really have no idea. Pressing F5 at this time takes me back to the browser, no complaints there. Uncommenting the RegisterAllControllersIn() method in CreateKernel() This is where stuff is really starting to get funky. Now I get a 404 error. Some times I have also gotten an ArgumentNullException on the RegisterAllControllersIn() line, but that is pretty rare, and I have not been able to reproduce it. Uncommenting the RegisterAllControllers() method in OnApplicationStarted() (And putting the comment back on the one in CreateKernel()) Results in behavior that seems exactly like that in point 1. So to keep from going on forever - is there an exact step-by-step guide on how to set up an MVC 2 project with Ninject 2 (both non-beta release versions) to get the controllers provided by Ninject? Of course I will then start providing some actual stuff for injection (like ISession objects and repositories, loggers etc), but I thought I'd get this working first. Any help will be highly appreciated! (Also posted to the Ninject Google Group)

    Read the article

  • SOAP call with query on result (SSRS, Sharepoint)

    - by Erik404
    Hi! I created a report in VS using a shared data source which is connected to a sharepoint list. In the report I created a dataset with a SOAP call to the data source so I get the result from the sharepoint list in a table. this is the soap call <Query> <SoapAction>http://schemas.microsoft.com/sharepoint/soap/GetListItems</SoapAction> <Method Namespace="http://schemas.microsoft.com/sharepoint/soap/" Name="GetListItems"> <Parameters> <Parameter Name="listName"> <DefaultValue>{BD8D39B7-FA0B-491D-AC6F-EC9B0978E0CE}</DefaultValue> </Parameter> <Parameter Name="viewName"> <DefaultValue>{E2168426-804F-4836-9BE4-DC5F8D08A54F}</DefaultValue> </Parameter> <Parameter Name="rowLimit"> <DefaultValue>9999</DefaultValue> </Parameter> </Parameters> </Method> <ElementPath IgnoreNamespaces="True">*</ElementPath> </Query> THis works fine, I have a result which I can show in a report, but I want to have the ability to select a parameter to filter the result on. I have created a parameter and when I preview the Report I see the dropdownbox which I can use to make a selection from the Title field, when I do this it still shows the first record, obviously it doens't work yet (DUH!) because I need to create a query somewhere, But! I have no idea where, I tried to include <Where> <Eq> <FieldRef Name="ows_Title" /> <Value Type="Text">testValue</Value> </Eq> </Where> in the the soap request but it didn't worked... I've searched teh intarwebz but couldn't find any simliar problems... kinda stuck now...any thoughts on this? EDIT Here's the query I used according to the blogpost Alex Angas linked. <Query> <SoapAction>http://schemas.microsoft.com/sharepoint/soap/GetListItems</SoapAction> <Method Namespace="http://schemas.microsoft.com/sharepoint/soap/" Name="GetListItems"> <queryOptions></queryOptions> <query><Query> <Where> <Eq> <FieldRef Name="ows_Title"/> <Value Type="Text">someValue</Value> </Eq> </Where> </Query></query> <Parameters> <Parameter Name="listName"> <DefaultValue>{BD8D39B7-FA0B-491D-AC6F-EC9B0978E0CE}</DefaultValue> </Parameter> <Parameter Name="viewName"> <DefaultValue>{E2168426-804F-4836-9BE4-DC5F8D08A54F}</DefaultValue> </Parameter> <Parameter Name="rowLimit"> <DefaultValue>9999</DefaultValue> </Parameter> </Parameters> </Method> <ElementPath IgnoreNamespaces="True">*</ElementPath> </Query> I tried to put the new query statement in every possible way in the existing, but it doesn't work at all, I do not get an error though so the code is valid, but I still get an unfiltered list as return... pulling my hair out here!

    Read the article

  • Problems with Android Fragment back stack

    - by DexterMoon
    I've got a massive problem with the way the android fragment backstack seems to work and would be most grateful for any help that is offered. Imagine you have 3 Fragments [1] [2] [3] I want the user to be able to navigate [1] > [2] > [3] but on the way back (pressing back button) [3] > [1]. As I would have imagined this would be accomplished by not calling addToBackStack(..) when creating the transaction that brings fragment [2] into the fragment holder defined in XML. The reality of this seems as though that if I dont want [2] to appear again when user presses back button on [3], I must not call addToBackStack in the transaction that shows fragment [3]. This seems completely counter-intuitive (perhaps coming from the iOS world). Anyway if i do it this way, when I go from [1] > [2] and press back I arrive back at [1] as expected. If I go [1] > [2] > [3] and then press back I jump back to [1] (as expected). Now the strange behavior happens when I try and jump to [2] again from [1]. First of all [3] is briefly displayed before [2] comes into view. If I press back at this point [3] is displayed, and if I press back once again the app exits. Can anyone help me to understand whats going on here? And here is the layout xml file for my main activity: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent" android:orientation="vertical" > <fragment android:id="@+id/headerFragment" android:layout_width="match_parent" android:layout_height="wrap_content" class="com.fragment_test.FragmentControls" > <!-- Preview: layout=@layout/details --> </fragment> <FrameLayout android:id="@+id/detailFragment" android:layout_width="match_parent" android:layout_height="fill_parent" /> Update This is the code I'm using to build by nav heirarchy Fragment frag; FragmentTransaction transaction; //Create The first fragment [1], add it to the view, BUT Dont add the transaction to the backstack frag = new Fragment1(); transaction = getSupportFragmentManager().beginTransaction(); transaction.replace(R.id.detailFragment, frag); transaction.commit(); //Create the second [2] fragment, add it to the view and add the transaction that replaces the first fragment to the backstack frag = new Fragment2(); transaction = getSupportFragmentManager().beginTransaction(); transaction.replace(R.id.detailFragment, frag); transaction.addToBackStack(null); transaction.commit(); //Create third fragment frag = new Fragment3(); transaction = getSupportFragmentManager().beginTransaction(); transaction.replace(R.id.detailFragment, frag); transaction.commit(); //END OF SETUP CODE------------------------- //NOW: //Press back once and then issue the following code: frag = new Fragment2(); transaction = getSupportFragmentManager().beginTransaction(); transaction.replace(R.id.detailFragment, frag); transaction.addToBackStack(null); transaction.commit(); //Now press back again and you end up at fragment [3] not [1] Many thanks

    Read the article

  • UITableView crashes when trying to scroll

    - by Ondrej
    Hi, I have a problem with data in UITableView. I have UIViewController, that contains UITableView outlet and few more things I am using and ... It works :) ... it works lovely, but ... I've created an RSS reader class that is using delegates to deploy the data to the table ... and once again, If I'll just create dummy data in the main controller everything works! problem is with this line: rss.delegate = self; Preview looks a little bit broken than here are those RSS reader files on Google code: (Link to the header file on GoogleCode) (Link to the implementation file on Google code) viewDidLoad function of my controller: IGDataRss20 *rss = [[[IGDataRss20 alloc] init] autorelease]; rss.delegate = self; [rss initWithContentsOfUrl:@"http://rss.cnn.com/rss/cnn_topstories.rss"]; and my delegate methods: - (void)parsingEnded:(NSArray *)result { super.data = [[NSMutableArray alloc] initWithArray:result]; NSLog(@"My Items: %d", [super.data count]); [super.table reloadData]; NSLog(@"Parsing ended"); } (void)parsingError:(NSString *)message { NSLog(@"MyMessage: %@", message); } (void)parsingStarted:(NSXMLParser *)parser { NSLog(@"Parsing started"); } Just to clarify, NSLog(@"Parsing ended"); is being executed and I have 10 items in the array. Ok, here's my RSS reader header file: @class IGDataRss20; @protocol IGDataRss20Delegate @optional (void)parsingStarted:(NSXMLParser *)parser; (void)parsingError:(NSString *)message; (void)parsingEnded:(NSArray *)result; @end @interface IGDataRss20 : NSObject { NSXMLParser *rssParser; NSMutableArray *data; NSMutableDictionary *currentItem; NSString *currentElement; id <IGDataRss20Delegate> delegate; } @property (nonatomic, retain) NSMutableArray *data; @property (nonatomic, assign) id delegate; (void)initWithContentsOfUrl:(NSString *)rssUrl; (void)initWithContentsOfData:(NSData *)inputData; @end And this RSS reader implementation file: #import "IGDataRss20.h" @implementation IGDataRss20 @synthesize data, delegate; (void)initWithContentsOfUrl:(NSString *)rssUrl { self.data = [[NSMutableArray alloc] init]; NSURL *xmlURL = [NSURL URLWithString:rssUrl]; rssParser = [[NSXMLParser alloc] initWithContentsOfURL:xmlURL]; [rssParser setDelegate:self]; [rssParser setShouldProcessNamespaces:NO]; [rssParser setShouldReportNamespacePrefixes:NO]; [rssParser setShouldResolveExternalEntities:NO]; [rssParser parse]; } (void)initWithContentsOfData:(NSData *)inputData { self.data = [[NSMutableArray alloc] init]; rssParser = [[NSXMLParser alloc] initWithData:inputData]; [rssParser setDelegate:self]; [rssParser setShouldProcessNamespaces:NO]; [rssParser setShouldReportNamespacePrefixes:NO]; [rssParser setShouldResolveExternalEntities:NO]; [rssParser parse]; } (void)parserDidStartDocument:(NSXMLParser *)parser { [[self delegate] parsingStarted:parser]; } (void)parser:(NSXMLParser *)parser parseErrorOccurred:(NSError *)parseError { NSString * errorString = [NSString stringWithFormat:@"Unable to parse RSS feed (Error code %i )", [parseError code]]; NSLog(@"Error parsing XML: %@", errorString); if ([parseError code] == 31) NSLog(@"Error code 31 is usually caused by encoding problem."); [[self delegate] parsingError:errorString]; } (void)parser:(NSXMLParser *)parser didStartElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI qualifiedName:(NSString *)qName attributes:(NSDictionary *)attributeDict { currentElement = [elementName copy]; if ([elementName isEqualToString:@"item"]) currentItem = [[NSMutableDictionary alloc] init]; } (void)parser:(NSXMLParser *)parser didEndElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI qualifiedName:(NSString *)qName { if ([elementName isEqualToString:@"item"]) { [data addObject:(NSDictionary *)[currentItem copy]]; } } (void)parser:(NSXMLParser *)parser foundCharacters:(NSString *)string { if (![currentItem objectForKey:currentElement]) [currentItem setObject:[[[NSMutableString alloc] init] autorelease] forKey:currentElement]; [[currentItem objectForKey:currentElement] appendString:string]; } (void)parserDidEndDocument:(NSXMLParser *)parser { //NSLog(@"RSS array has %d items: %@", [data count], data); [[self delegate] parsingEnded:(NSArray *)self.data]; } (void)dealloc { [data, delegate release]; [super dealloc]; } @end Hope someone will be able to help me as I am becoming to be quite desperate, and I thought I am not already such a greenhorn :) Thanks, Ondrej

    Read the article

  • curl multipart/form-data help

    - by user253530
    Hi am trying to post some data on a website using CURL. The posting process has 3 steps. 1. enter a URL, submit and get to the 2nd step with some fields already completed 2. submit again, after you entered some more data and preview the form. 3. submit the final data. The problem is that after the second step, the form data looks like this POSTDATA =-----------------------------12249266671528 Content-Disposition: form-data; name="title" Filme 2010, filme 2009, filme noi, programe TV, program cinema, premiere cinema, trailere filme - CineMagia.ro -----------------------------12249266671528 Content-Disposition: form-data; name="category" 3 -----------------------------12249266671528 Content-Disposition: form-data; name="tags" filme, programe tv, program cinema -----------------------------12249266671528 Content-Disposition: form-data; name="bodytext" Filme 2010, filme 2009, filme noi, programe TV, program cinema, premiere cinema, trailere filme -----------------------------12249266671528 Content-Disposition: form-data; name="trackback" -----------------------------12249266671528 Content-Disposition: form-data; name="url" http://cinemagia.ro -----------------------------12249266671528 Content-Disposition: form-data; name="phase" 2 -----------------------------12249266671528 Content-Disposition: form-data; name="randkey" 9510520 -----------------------------12249266671528 Content-Disposition: form-data; name="id" 17753 -----------------------------12249266671528-- I am stuck trying to devise an algorithm that will generate this kind of POST data for the second step. Just to mention the URL of the form never changes. It is always: http://www.xxx.com/submit. There is only a hidden input called "phase" that changes according to the step i am currently on (phase = 1, phase = 2, phase = 3). Any help, be it either code, pseudo-code or just guidance would be greatly appreciated. My code so far: function postBlvsocialbookmarkingcom($curl,$vars) { extract($vars); $baseUrl = "http://www.blv-socialbookmarking.com/"; //step 1: login $curl->setRedirect(); $page = $curl->post ($baseUrl.'login.php?return=/index.php', array ('username' => $username, 'password' => $password, 'processlogin' => '1', 'return' => '/index.php')); if ($err = $curl->getError ()) { return $err; } //post step 1---- //get random key $page = $curl->post($baseUrl.'/submit', array()); $randomKey = explode('<input type="hidden" name="randkey" value="',$page); $randKey = explode('"',$randomKey[1]); //------------------------------------- $page = $curl->post($baseUrl.'/submit', array('url'=>$address,'phase'=>'1','randkey'=>$randKey[0],'id'=>'c_1')); if ($err = $curl->getError ()) { return $err; } //echo $page; // //post step 2 $page = $curl->post ($baseUrl.'/submit', array ('title' => $title, 'category'=>'1', 'tags' => $tags, 'bodytext' => $description, 'phase' => '2')); if ($err = $curl->getError ()) { return $err; } echo $page; //post step 3 $page = $curl->post ($baseUrl.'/submit', array ('phase' => '3')); if ($err = $curl->getError ()) { return $err; } echo $page; }

    Read the article

  • Flex chart not displaying right values along x axis.

    - by Shah Al
    I don't know of any better way to ask this question. If the below code is run (i know the cData sections are not visible in the preview, something causes it to be ignored). The result does not represent the data correctly. 1. Flex ignores missing date 24 aug for DECKER. 2. It wrongly associates 42.77 to 23-Aug instead of 24-AUG. Is there a way in flex, where the x-axis is a union of all available points ? The below code is entirely from : Adobe website link I have only commented 2 data points. //{date:"23-Aug-05", close:45.74}, and //{date:"24-Aug-05", close:150.71}, <?xml version="1.0"?> [Bindable] public var SMITH:ArrayCollection = new ArrayCollection([ {date:"22-Aug-05", close:41.87}, //{date:"23-Aug-05", close:45.74}, {date:"24-Aug-05", close:42.77}, {date:"25-Aug-05", close:48.06}, ]); [Bindable] public var DECKER:ArrayCollection = new ArrayCollection([ {date:"22-Aug-05", close:157.59}, {date:"23-Aug-05", close:160.3}, //{date:"24-Aug-05", close:150.71}, {date:"25-Aug-05", close:156.88}, ]); [Bindable] public var deckerColor:Number = 0x224488; [Bindable] public var smithColor:Number = 0x884422; ]] <mx:horizontalAxisRenderers> <mx:AxisRenderer placement="bottom" axis="{h1}"/> </mx:horizontalAxisRenderers> <mx:verticalAxisRenderers> <mx:AxisRenderer placement="left" axis="{v1}"> <mx:axisStroke>{h1Stroke}</mx:axisStroke> </mx:AxisRenderer> <mx:AxisRenderer placement="left" axis="{v2}"> <mx:axisStroke>{h2Stroke}</mx:axisStroke> </mx:AxisRenderer> </mx:verticalAxisRenderers> <mx:series> <mx:ColumnSeries id="cs1" horizontalAxis="{h1}" dataProvider="{SMITH}" yField="close" displayName="SMITH" > <mx:fill> <mx:SolidColor color="{smithColor}"/> </mx:fill> <mx:verticalAxis> <mx:LinearAxis id="v1" minimum="40" maximum="50"/> </mx:verticalAxis> </mx:ColumnSeries> <mx:LineSeries id="cs2" horizontalAxis="{h1}" dataProvider="{DECKER}" yField="close" displayName="DECKER" > <mx:verticalAxis> <mx:LinearAxis id="v2" minimum="150" maximum="170"/> </mx:verticalAxis> <mx:lineStroke> <mx:Stroke color="{deckerColor}" weight="4" alpha="1" /> </mx:lineStroke> </mx:LineSeries> </mx:series> </mx:ColumnChart> <mx:Legend dataProvider="{myChart}"/>

    Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >