Search Results

Search found 15055 results on 603 pages for 'volume shadow copy'.

Page 406/603 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

  • Feynman's inbox

    - by user12607414
    Here is Richard Feynman writing on the ease of criticizing theories, and the difficulty of forming them: The problem is not just to say something might be wrong, but to replace it by something — and that is not so easy. As soon as any really definite idea is substituted it becomes almost immediately apparent that it does not work. The second difficulty is that there is an infinite number of possibilities of these simple types. It is something like this. You are sitting working very hard, you have worked for a long time trying to open a safe. Then some Joe comes along who knows nothing about what you are doing, except that you are trying to open the safe. He says ‘Why don’t you try the combination 10:20:30?’ Because you are busy, you have tried a lot of things, maybe you have already tried 10:20:30. Maybe you know already that the middle number is 32 not 20. Maybe you know as a matter of fact that it is a five digit combination… So please do not send me any letters trying to tell me how the thing is going to work. I read them — I always read them to make sure that I have not already thought of what is suggested — but it takes too long to answer them, because they are usually in the class ‘try 10:20:30’. (“Seeking New Laws”, page 161 in The Character of Physical Law.) As a sometime designer (and longtime critic) of widely used computer systems, I have seen similar difficulties appear when anyone undertakes to publicly design a piece of software that may be used by many thousands of customers. (I have been on both sides of the fence, of course.) The design possibilities are endless, but the deep design problems are usually hidden beneath a mass of superfluous detail. The sheer numbers can be daunting. Even if only one customer out of a thousand feels a need to express a passionately held idea, it can take a long time to read all the mail. And it is a fact of life that many of those strong suggestions are only weakly supported by reason or evidence. Opinions are plentiful, but substantive research is time-consuming, and hence rare. A related phenomenon commonly seen with software is bike-shedding, where interlocutors focus on surface details like naming and syntax… or (come to think of it) like lock combinations. On the other hand, software is easier than quantum physics, and the population of people able to make substantial suggestions about software systems is several orders of magnitude bigger than Feynman’s circle of colleagues. My own work would be poorer without contributions — sometimes unsolicited, sometimes passionately urged on me — from the open source community. If a Nobel prize winner thought it was worthwhile to read his mail on the faint chance of learning a good idea, I am certainly not going to throw mine away. (In case anyone is still reading this, and is wondering what provoked a meditation on the quality of one’s inbox contents, I’ll simply point out that the volume has been very high, for many months, on the Lambda-Dev mailing list, where the next version of the Java language is being discussed. Bravo to those of my colleagues who are surfing that wave.) I started this note thinking there was an odd parallel between the life of the physicist and that of a software designer. On second thought, I’ll bet that is the story for anybody who works in public on something requiring special training. (And that would be pretty much anything worth doing.) In any case, Feynman saw it clearly and said it well.

    Read the article

  • The Connected Company: WebCenter Portal - Feedback - Analytics and Polls

    - by Michael Snow
    Evernote Export body, td { }Guest Post by: Mitchell Palski, Staff Sales Consultant The importance of connecting peers has been widely recognized and socialized as a critical component of employee intranets. Organizations are striving to provide mediums for sharing knowledge and improving awareness across their enterprise. Indirectly, the socialization of your enterprise should lead to cost savings and improved product/service quality. However, many times the direct effects of connecting an organization’s leadership with its employees are overlooked. Oracle WebCenter Portal can help you bridge that gap by gathering implicit and explicit feedback. Implicit Feedback Through Usage Analytics Analytics allows administrators to track and analyze WebCenter Portal traffic and usage. Analytics provides the following basic functionality: Usage Tracking Metrics: Analytics collects and reports metrics of common WebCenter Portal functions, including community and portlet traffic. Behavior Tracking: Analytics can be used to analyze WebCenter Portal metrics to determine usage patterns, such as page visit duration and usage over time. User Profile Correlation: Analytics can be used to correlate metric information with user profile information. Usage tracking reports can be viewed and filtered by user profile data such as country, company or title. Usage analytics help measure how users interact with website content – allowing your IT staff and business analysts to make informed decisions when planning development for your next intranet enhancement. For example: If users are not accessing your Announcements page and missing critical information that they need to be aware of, you may elect to use graphical links on the home page to direct more users to that page. As a result, the number of employee help-requests to HR decreases. If users are not accessing your News page to read recent articles, you may elect to stop spending as much time updating the page with new stories and cut costs in your communications department. You notice that there is a high volume of users accessing the Employee Dashboard page so your organization decides to continue making personalization enhancements to the page and investing in the Portal tool that most users are accessing. Usage analytics aren’t necessarily a new concept in the IT industry. What sets WebCenter Portal Analytics apart is: Reports are tailored for WebCenter specific tools Report can be easily added to a page as simple as a drag-and-drop Explicit Feedback Through Polls WebCenter Portal users can create, edit, take, and analyze online polls. With polls, you can survey your audience (such as their opinions and their experience level), check whether they can recall important information, and gather feedback and metrics. How many times have you been involved in a requirements discussion and someone has asked a question similar to “Well how do you know that no one likes our home page?” and the response is “Everyone says they hate it! That’s all anyone complains about.” No one has any measurable, quantifiable metric to gauge user satisfaction. Analytics measure usage, but your organization also needs to measure the quality of your portal as defined by the actual people that use it. With that information, your leadership can make informed decisions that will not only match usage patterns but also relate to employees on a personal level. The end result is a connection between employees and leadership that gives everyone in the organization a sense of ownership of their Portal rather than the feeling of development decisions being segregated to leadership only. Polls can be created and edited through the Poll Manager: Polls and View Poll Results can easily be added to a page through drag-and-drop. What did we learn? Being a “connected” company doesn’t just mean helping employees connect with each other horizontally across your enterprise. It also means connecting those employees to the decisions that affect their everyday activities. Through WebCenter Portal Usage Analytics and Polls, any decision that is made to remove a Portal page, update a Portal page, or develop new Portal functionality, can be justified by quantifiable metrics. Instead of fielding complaints and hearing that your employees don’t have a voice, give those employees a voice and listen!

    Read the article

  • JOGL2 test compiles, but doesn't execute - help?

    - by Chuchinyi
    I have a problem with JOGL2. My JOGL2Template.java compiles fine, but executing it results in the following error: D:\java\java\jogl>javac JOGL2Template.java <== compile ok D:\java\java\jogl>java JOGL2Template <== execute error Exception in thread "main" java.lang.ExceptionInInitializerError at javax.media.opengl.GLProfile.<clinit>(GLProfile.java:1176) at JOGL2Template.<init>(JOGL2Template.java:24) at JOGL2Template.main(JOGL2Template.java:57) Caused by: java.lang.SecurityException: no certificate for gluegen-rt.dll in D:\ java\lib\gluegen-rt-natives-windows-i586.jar at com.jogamp.common.util.JarUtil.validateCertificate(JarUtil.java:350) at com.jogamp.common.util.JarUtil.validateCertificates(JarUtil.java:324) at com.jogamp.common.util.cache.TempJarCache.validateCertificates(TempJa rCache.java:328) at com.jogamp.common.util.cache.TempJarCache.bootstrapNativeLib(TempJarC ache.java:283) at com.jogamp.common.os.Platform$3.run(Platform.java:308) at java.security.AccessController.doPrivileged(Native Method) at com.jogamp.common.os.Platform.loadGlueGenRTImpl(Platform.java:298) at com.jogamp.common.os.Platform.<clinit>(Platform.java:207) ... 3 more Here is the JOGL2Template.java source code: import java.awt.Dimension; import java.awt.Frame; import java.awt.event.WindowAdapter; import java.awt.event.WindowEvent; import javax.media.opengl.GLAutoDrawable; import javax.media.opengl.GLCapabilities; import javax.media.opengl.GLEventListener; import javax.media.opengl.GLProfile; import javax.media.opengl.awt.GLCanvas; import com.jogamp.opengl.util.FPSAnimator; import javax.swing.JFrame; /* * JOGL 2.0 Program Template For AWT applications */ public class JOGL2Template extends JFrame implements GLEventListener { private static final int CANVAS_WIDTH = 640; // Width of the drawable private static final int CANVAS_HEIGHT = 480; // Height of the drawable private static final int FPS = 60; // Animator's target frames per second // Constructor to create profile, caps, drawable, animator, and initialize Frame public JOGL2Template() { // Get the default OpenGL profile that best reflect your running platform. GLProfile glp = GLProfile.getDefault(); // Specifies a set of OpenGL capabilities, based on your profile. GLCapabilities caps = new GLCapabilities(glp); // Allocate a GLDrawable, based on your OpenGL capabilities. GLCanvas canvas = new GLCanvas(caps); canvas.setPreferredSize(new Dimension(CANVAS_WIDTH, CANVAS_HEIGHT)); canvas.addGLEventListener(this); // Create a animator that drives canvas' display() at 60 fps. final FPSAnimator animator = new FPSAnimator(canvas, FPS); addWindowListener(new WindowAdapter() { // For the close button @Override public void windowClosing(WindowEvent e) { // Use a dedicate thread to run the stop() to ensure that the // animator stops before program exits. new Thread() { @Override public void run() { animator.stop(); System.exit(0); } }.start(); } }); add(canvas); pack(); setTitle("OpenGL 2 Test"); setVisible(true); animator.start(); // Start the animator } public static void main(String[] args) { new JOGL2Template(); } @Override public void init(GLAutoDrawable drawable) { // Your OpenGL codes to perform one-time initialization tasks // such as setting up of lights and display lists. } @Override public void display(GLAutoDrawable drawable) { // Your OpenGL graphic rendering codes for each refresh. } @Override public void reshape(GLAutoDrawable drawable, int x, int y, int w, int h) { // Your OpenGL codes to set up the view port, projection mode and view volume. } @Override public void dispose(GLAutoDrawable drawable) { // Hardly used. } } Any ideas what might be the cause of these errors?

    Read the article

  • Build 2012, the first post

    - by Dennis Vroegop
    Yes, I was one of the lucky few who made it to Build. Build, formerly known as the Professional Developers Conference (or PDC) is the place to be if you are a developer on the Microsoft platform. Since I take my job seriously I took out some time on my busy schedule, sighed at the thought of not seeing my family for another week and signed up for it. Now, before I talk about the amazing Surface devices (yes, this posting is written on one of them), the great Lumia 920 we all got, the long deserved love for touch, NUI and other things I have been talking about for years, I need to do some ranting. So if you are anxious to read about the technical goodies you’ll have to wait until the next post. Still here? Good. When I signed up for the Build conference during my holidays this summer it was pretty obvious that demand would be high. Therefor I made sure I was on time. But even though I registered only 7 minutes after the initial opening time the Early Bird discount for the first 500 attendees was already sold out. I later learned that registration actually started 5 minutes before the scheduled time but even though it is still impressive how fast things went. The whole event sold out in 57 minutes Or so they say… A lot of people got put on the waiting list. There was room for about 1500 attendees and I heard that at least 1000 people were on that waiting list, including a lot of people I know. Strangely, all of them got tickets assigned after 2 weeks. Here at the conference I heard from a guy from Nokia that they had shipped 2500 Lumia 920 phones. That number matches the rumors that the organization added 1000 extra tickets. This, of course is no problem. I am not an elitist and I think large crowds have a special atmosphere that I quite like. But…. The Microsoft Campus is not equipped for that sheer volume of visitors. That was painfully obvious during on-site registration where people had to stand in line for over 2 hours. The conference is spread out over 2 buildings, divided by a 15 minute busride (yes, the campus is that big). I have seen queues of over 200 people waiting for the bus and when that arrived it had a capacity of 16. I can assure you: that doesn’t fit. This of course means that travelling from one site to the other might take about 30 minutes. So you arrive at the session room just in time, only to find out it’s full. Since you can’ get into that session you try to find another one but now you’re even more late so you have no chance at all of entering. The doors are closed and you’re told: “Well, you can watch the live stream online”. Mmmm… So I spend thousands of dollars, a week away from home, family and work to be told I can also watch the sessions online? Are you fricking kidding me? I could go on but I won’t. You get the idea. It’s jus badly organized, something I am not really used to in my 20 years of experience at Microsoft events. Yes, I am disappointed. I hope a lot of people here in Redmond will also fill in the evals and that the organization next year will do a better job. Really, Build deserves better. </rantmode>

    Read the article

  • Find Knowledge Quickly

    - by Get Proactive Customer Adoption Team
    Untitled Document Get to relevant knowledge on the Oracle products you use in a few quick steps! Customers tell us that the volume of search results returned can make it difficult to find the information they need, especially when similar Oracle products exist. These simple tips show you how to filter, browse, search, and refine your results to get relevant answers faster. Filter first: PowerView is your best friend Powerview is an often ignored feature of My Oracle Support that enables you to control the information displayed on the Dashboard, the Knowledge tab and regions, and the Service Request tab based on one or more parameters. You can define a PowerView to limit information based on product, product line, support ID, platform, hostname, system name and others. Using PowerView allows you to restrict: Your search results to the filters you have set The product list when selecting your products in Search & Browse and when creating service requests   The PowerView menu is at the top of My Oracle Support, near the title You turn PowerView on by clicking PowerView is Off, which is a button. When PowerView is On, and filters are active, clicking the button again will toggle Powerview off. Click the arrow to the right to create new filters, edit filters, remove a filter, or choose from the list of previously created filters. You can create a PowerView in 3 simple steps! Turn PowerView on and select New from the PowerView menu. Select your filter from the Select Filter Type dropdown list and make selections from the other two menus. Hint: While there are many filter options, selecting your product line or your list of products will provide you with an effective filter. Click the plus sign (+) to add more filters. Click the minus sign (-) to remove a filter. Click Create to save and activated the filter(s) You’ll notice that PowerView is On displays along with the active filters. For more information about the PowerView capabilities, click the Learn more about PowerView… menu item or view a short video. Browse & Refine: Access the Best Match Fast For Your Product and Task In the Knowledge Browse region of the Knowledge or Dashboard tabs, pick your product, pick your task, select a version, if applicable. A best match document – a collection of knowledge articles and resources specific to your selections - may display, offering you a one-stop shop. The best match document, called an “information center,” is an aggregate of dynamically updated links to information pertinent to the product, task, and version (if applicable) you chose. These documents are refreshed every 24 hours to ensure that you have the most current information at your fingertips. Note: Not all products have “information centers.” If no information center appears as a best match, click Search to see a list of search results. From the information center, you can access topics from a product overview to security information, as shown in the left menu. Just want to search? That’s easy too! Again, pick your product, pick your task, select a version, if applicable, enter a keyword term, and click Search. Hint: In this example, you’ll notice that PowerView is on and set to PeopleSoft Enterprise. When PowerView is on and you select a product from the Knowledge Base product list, the listed products are limited to the active PowerView filter. (Products you’ve previously picked are also listed at the top of the dropdown list.) Your search results are displayed based on the parameters you entered. It’s that simple! Related Information: My Oracle Support - User Resource Center [ID 873313.1] My Oracle Support Community For more tips on using My Oracle Support, check out these short video training modules. My Oracle Support Speed Video Training [ID 603505.1]

    Read the article

  • The Social Enterprise: Gangnam Style

    - by Mike Stiles
    Are only small and medium businesses able to put social strategies in place, generate consistent, compelling content for customers, and be nimble enough to listen and respond to the social communities they build? Or are enterprise organizations eagerly and effectively adopting social as well? It depends on whom inside the organization you ask. A study from Attensity looked at who “gets” social inside enterprise organizations. The results were unsurprising. Mostly, Generation X and Y employees who came of age with social as part of their lives and as a key communications vehicle understand it. Imagine being a 25-year-old at a company that bans employees from accessing Facebook at work. You may as well tell them they can’t use phones and must do all calculations on an abacus. To them, such policy is absent of real-world logic and signals to them the organization is destined to be the victim of an up-and-comer. After that, it’s senior management that gets social. You don’t get to be in senior management without reading a few things and paying attention. Most senior managers are well aware of the impact social has had and will have, though they may be unsure of what to do about it. The better ones will utilize those on the inside who do inherently know how to communicate and build virtual relationships using social. The very best will get the past out of the way for these social innovators, so the new communications can be enacted minus counterproductive dictums, double-clutching, meeting-creep, and all the other fading internal practices that water down content and impede change. Organizationally, the Attensity study found 81% of enterprise companies believe failing to embrace social will result in their being left behind. Yet our old friend fear still has many captive in its clutches. 79% feel overwhelmed by the volume of social data available, something a social technology partner with goal-oriented analytics expertise could go a long way toward alleviating. Then there’s the fear of social having a negative impact. This comes from a lack of belief in the product, the customer service, or both. The public uses social not to go out and slay brands. They’re using it to be honest. If the fear is that honesty will reflect badly on the brand, the brand has much bigger, broader problems than what happens on Facebook. Sadly, most enterprise organizations still see social as a megaphone, a one-way channel with which to hit people with ads. They either don’t understand social relationships, or don’t want any. The truly unenlightened manager will always say, “We help them by selling them our stuff.” “Brand affinity” is a term, it’s just not one assigned much value in enterprise organizations. Which brings us to Psy, the Korean performer whose Internet video phenom “Gangnam Style,” as of this writing, has been viewed 438,550,238 times on YouTube. It’s bigger than anything a brand will probably ever publish. Most brands would never have seen the point of making or publishing it. But a funny thing happened on the way to Internet success. The video literally doubled the stock price of Psy’s father’s software firm. NH Investment and Securities said, "The positive sentiment has attracted investors just because of the fact the company is owned by Psy's father and uncle.” The company wasn’t mentioned or seen in the video in any way, yet reaped tangible rewards just for being tangentially associated with it. Imagine your brand being visibly and directly responsible for such a smash and tell me it’s worthless. When enterprise organizations embrace the value of igniting passions, making people happier, solving their problems, informing them, helping them have fun, etc., then they will have fully embraced social, and will reap the brand affinity rewards of heightened awareness, brand loyalty and yes, sales.

    Read the article

  • Process for Securing Web Sites and Applications

    - by Aamir Hasan
    The following quick-start guide provides a detailed overview of how to configure security for IIS 6.0. Reduce the Attack Surface of the Web Server 1.       Enable only essential Windows Server 2003 components and services. 2.       Enable only essential IIS 6.0 components and services. 3.       Enable only essential Web service extensions. 4.       Enable only essential Multipurpose Internet Mail Extensions (MIME) types. 5.       Configure Windows Server 2003 security settings. Prevent Unauthorized Access to Web Sites and Applications 1.       Store content on a dedicated disk volume. 2.       Set IIS Web site permissions. 3.       Set IP address and domain name restrictions. 4.       Set the NTFS file system permissions. Isolate Web Sites and Applications 1.       Evaluate the effects of impersonation on application compatibility: 2·         Identify the impersonation behavior for ASP applications. 3·         Select the impersonation behavior for ASP.NET applications. 4.       Configure Web sites and applications for isolation. Configure User Authentication 1.       Configure Web site authentication. 2·         Select the Web site authentication method. 3·         Configure the Web site authentication method. 4.       Configure File Transfer Protocol (FTP) site authentication. Encrypt Confidential Data Exchanged with Clients 1.       Use Secure Sockets Layer (SSL) to encrypt confidential data. 2.       Use Internet Protocol security (IPSec) or virtual private network (VPN) with remote administration. Maintain Web Site and Application Security 1.       Obtain and apply current security patches. 2.       Enable Windows Server 2003 security logs. 3.       Enable file access auditing for Web site content. 4.       Configure IIS logs. 5.       Review security policies, processes, and procedures.  Note:To secure the Web sites and applications in a Web farm, use the process described in this chapter to configure security for each server in the Web farm. Link:http://www.studentacad.com/post/2010/04/28/Process-for-Securing-Web-Sites-and-Applications.aspx

    Read the article

  • Shrinking a Linux OEL 6 virtual Box image (vdi) hosted on Windows 7

    - by AndyBaker
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Recently for a customer demonstration there was a requirement to build a virtual box image with Oracle Enterprise Manager Cloud Control 12c. This meant installing OEL Linux 6 as well as creating an 11gr2 database and Oracle Enterprise Manager Cloud Control 12c on a single virtual box. Storage was sized at 300Gb using dynamically allocated storage for the virtual box and about 10Gb was used for Linux and the initial build. After copying over all the binaries and performing all the installations the virtual box became in the region of 80Gb used size on the host operating system, however internally it only really needed around 20Gb. This meant 60Gb had been used when copying over all the binaries and although now free was not returned to the host operating system due to the growth of the virtual box storage '.vdi' file.  Once the ‘vdi’ storage had grown it is not shrunk automatically afterwards. Space is always tight on the laptop so it was desirable to shrink the virtual box back to a minimal size and here is the process that was followed. Install 'zerofree' Linux package into the OEL6 virtual box The RPM was downloaded and installed from a site similar to below; http://rpm.pbone.net/index.php3/stat/4/idpl/12548724/com/zerofree-1.0.1-5.el5.i386.rpm.html A simple internet search for ’zerofree Linux rpm’ was easy to perform and find the required rpm. Execute 'zerofree' package on the desired Linux file system To execute this package the desired file system needs to be mounted read only. The following steps outline this process. As root: # umount /u01 As root:# mount –o ro –t ext4 /u01 NOTE: The –o is options and the –t is the file system type found in the /etc/fstab. Next run zerofree against the required storage, this is located by a simple ‘df –h’ command to see the device associated with the mount. As root:# zerofree –v /dev/sda11   NOTE: This takes a while to run but the ‘-v’ option gives feedback on the process. What does Zerofree do? Zerofree’s purpose is to go through the file system and zero out any unused sectors on the volume so that the later stages can shrink the virtual box storage obtaining the free space back. When zerofree has completed the virtual box can be shutdown as the last stage is performed on the physical host where the virtual box vdi files are located. Compact the virtual box ‘.vdi’ files The final stage is to get virtual box to shrink back the storage that has been correctly flagged as free space after executing zerofree. On the physical host in this case a windows 7 laptop a DOS window was opened. At the prompt the first step is to put the virtual box binaries onto the PATH. C:\ >echo %PATH%   The above shows the current value of the PATH environment variable. C:\ >set PATH=%PATH%;c:\program files\Oracle\Virtual Box;   The above adds onto the existing path the virtual box binary location. C:\>cd c:\Users\xxxx\OEL6.1   The above changes directory to where the VDI files are located for the required virtual box machine. C:\Users\xxxxx\OEL6.1>VBoxManage.exe modifyhd zzzzzz.vdi compact  NOTE: The zzzzzz.vdi is the name of the required vdi file to shrink. Finally the above command is executed to perform the compact operation on the ‘.vdi’ file(s). This also takes a long time to complete but shrinks the VDI file back to a minimum size. In the case of the demonstration virtual box OEM12c this reduced the virtual box to 20Gb from 80Gb which was a great outcome to achieve.

    Read the article

  • Getting Started with Cloud Computing

    - by juanlarios
    You’ve likely heard about how Office 365 and Windows Intune are great applications to get you started with Cloud Computing. Many of you emailed me asking for more info on what Cloud Computing is, including the distinction between "Public Cloud" and "Private Cloud". I want to address these questions and help you get started. Let's begin with a brief set of definitions and some places to find more info; however, an excellent place where you can always learn more about Cloud Computing is the Microsoft Virtual Academy. Public Cloud computing means that the infrastructure to run and manage the applications users are taking advantage of is run by someone else and not you. In other words, you do not buy the hardware or software to run your email or other services being used in your organization – that is done by someone else. Users simply connect to these services from their computers and you pay a monthly subscription fee for each user that is taking advantage of the service. Examples of Public Cloud services include Office 365, Windows Intune, Microsoft Dynamics CRM Online, Hotmail, and others. Private Cloud computing generally means that the hardware and software to run services used by your organization is run on your premises, with the ability for business groups to self-provision the services they need based on rules established by the IT department. Generally, Private Cloud implementations today are found in larger organizations but they are also viable for small and medium-sized businesses since they generally allow an automation of services and reduction in IT workloads when properly implemented. Having the right management tools, like System Center 2012, to implement and operate Private Cloud is important in order to be successful. So – how do you get started? The first step is to determine what makes the most sense to your organization. The nice thing is that you do not need to pick Public or Private Cloud – you can use elements of both where it makes sense for your business – the choice is yours. When you are ready to try and purchase Public Cloud technologies, the Microsoft Volume Licensing web site is a good place to find links to each of the online services. In particular, if you are interested in a trial for each service, you can visit the following pages: Office 365, CRM Online, Windows Intune, and Windows Azure. For Private Cloud technologies, start with some of the courses on Microsoft Virtual Academy and then download and install the Microsoft Private Cloud technologies including Windows Server 2008 R2 Hyper-V and System Center 2012 in your own environment and take it for a spin. Also, keep up to date with the Canadian IT Pro blog to learn about events Microsoft is delivering such as the IT Virtualization Boot Camps and more to get you started with these technologies hands on. Finally, I want to ask for your help to allow the team at Microsoft to continue to provide you what you need. Twice a year through something we call "The Global Relationship Study" – they reach out and contact you to see how they're doing and what Microsoft could do better. If you get an email from "Microsoft Feedback" with the subject line "Help Microsoft Focus on Customers and Partners" between March 5th and April 13th, please take a little time to tell them what you think. Cloud Computing Resources: Microsoft Server and Cloud Computing site – information on Microsoft's overall cloud strategy and products. Microsoft Virtual Academy – for free online training to help improve your IT skillset. Office 365 Trial/Info page – get more information or try it out for yourself. Office 365 Videos – see how businesses like yours have used Office 365 to transition to the cloud. Windows Intune Trial/Info – get more information or try it out for yourself. Microsoft Dynamics CRM Online page – information on trying and licensing Microsoft Dynamics CRM Online. Additional Resources You May Find Useful: Springboard Series Your destination for technical resources, free tools and expert guidance to ease the deployment and management of your Windows-based client infrastructure. TechNet Evaluation Center Try some of our latest Microsoft products for free, Like System Center 2012 Pre-Release Products, and evaluate them before you buy. AlignIT Manager Tech Talk Series A monthly streamed video series with a range of topics for both infrastructure and development managers. Ask questions and participate real-time or watch the on-demand recording. Tech·Days Online Discover what's next in technology and innovation with Tech·Days session recordings, hands-on labs and Tech·Days TV.

    Read the article

  • Using Content Analytics for More Effective Engagement

    - by Kellsey Ruppel
    Using Content Analytics for More Effective Engagement: Turning High-Volume Content into Templates for Success By Mitchell Palski, Oracle WebCenter Sales Consultant Many organizations use Oracle WebCenter Portal to develop these basic types of portals: Intranet portals used for collaboration, employee self-service, and company communication Extranet portals used by customers and partners for self-service and support Team collaboration portals that allow users to share documents and content, track activity, and engage in discussions Portals are intended to provide a personalized, single point of interaction with web-based applications and information. The user experiences that a Portal is capable of displaying should be relevant to an individual user or class of users (a group or role). The components of a Portal that would vary based on a user’s identity include: Web content such as images, news articles, and on-screen instruction Social tools such as threaded discussions, polls/surveys, and blogs Document management tools to upload, download, and edit files Web applications that present data visualizations and data entry modules These collections of content, tools, and applications make up valuable workspaces. The challenge that a development team may have is defining which combinations are the most effective for its users. No one wants to create and manage a workspace that goes un-used or (even worse) that is used but is ineffective. Oracle WebCenter Portal provides you with the capabilities to not only rapidly develop variations of portals, but also identify which portals are the most effective and should be re-used throughout an enterprise. Capturing Portal AnalyticsOracle WebCenter Portal provides an analytics service that allows administrators and business users to track and analyze portal usage. These analytics are captured in the form of: Usage tracking metrics Behavior tracking User Profile Correlation The out-of-the-box task reports that come with Oracle WebCenter Portal include: WebCenter Portal Traffic Page Traffic Login Metrics Portlet Traffic Portlet Response Time Portlet Instance Traffic Portlet Instance Response Time Search Metrics Document Metrics Wiki Metrics Blog Metrics Discussion Metrics Portal Traffic Portal Response Time By determining the usage and behavior tracking metrics that are associated with specific user profiles (including groups and roles), your administrators will be able to identify the components of your solution that are the most valuable.  Your first step as an administrator should be to identify the specific pages and/or components are used the most frequently. Next, determine the user(s) or user-group(s) that are accessing those high-use elements of a portal. It is also important to determine patterns in high-usage and see if they correlate to a specific schedule. One of the goals of any development team (especially those that are following Agile methodologies) should be to develop reusable web components to minimize redundant development. Oracle WebCenter Portal provides you the tools to capture the successful workspaces that have already been developed and identified so that they can be reused for similar user demographics. Re-using Successful PortalsWhen creating a new Portal in Oracle WebCenter, developers have the option to base that portal on a template that includes: Pre-seeded data such as pages, tools, user roles, and look-and-feel assets Specific sub-sets of page-layouts, tools, and other resources to standardize what is added to a Portal’s pages Any custom components that your team creates during development cycles Once you have identified a successful workspace and its most valuable components, leverage Oracle WebCenter’s ability to turn that custom portal into a portal template. By creating a template from your already successful portal, you are empowering your enterprise by providing a starting point for future initiatives. Your new projects, new teams, and new web pages can benefit from lessons learned and adjustments that have already been made to optimize user experiences instead of starting from scratch. ***For a complete explanation of how to work with Portal Templates, be sure to read the Fusion Middleware documentation available online.

    Read the article

  • dns queries not using nscd for caching

    - by xenoterracide
    I'm trying to use nscd (Nameservices Cache Daemon) to cache dns locally so I can stop using bind to do it. I've gotten it started and ntpd seems to attempt to use it. But everything else for hosts seems to ignore it. e.g if I do dig apache.org 3 times none of them will hit the cache. I'm viewing the cache stats using nscd -g to determine whether it's been used. I've also turned the debug log level up to see if I can see it hitting and the queries don't even hit nscd. nsswitch.conf # Begin /etc/nsswitch.conf passwd: files group: files shadow: files publickey: files hosts: cache files dns networks: files protocols: files services: files ethers: files rpc: files netgroup: files # End /etc/nsswitch.confenter code here nscd.conf # # /etc/nscd.conf # # An example Name Service Cache config file. This file is needed by nscd. # # Legal entries are: # # logfile <file> # debug-level <level> # threads <initial #threads to use> # max-threads <maximum #threads to use> # server-user <user to run server as instead of root> # server-user is ignored if nscd is started with -S parameters # stat-user <user who is allowed to request statistics> # reload-count unlimited|<number> # paranoia <yes|no> # restart-interval <time in seconds> # # enable-cache <service> <yes|no> # positive-time-to-live <service> <time in seconds> # negative-time-to-live <service> <time in seconds> # suggested-size <service> <prime number> # check-files <service> <yes|no> # persistent <service> <yes|no> # shared <service> <yes|no> # max-db-size <service> <number bytes> # auto-propagate <service> <yes|no> # # Currently supported cache names (services): passwd, group, hosts, services # logfile /var/log/nscd.log threads 4 max-threads 32 server-user nobody # stat-user somebody debug-level 9 # reload-count 5 paranoia no # restart-interval 3600 enable-cache passwd yes positive-time-to-live passwd 600 negative-time-to-live passwd 20 suggested-size passwd 211 check-files passwd yes persistent passwd yes shared passwd yes max-db-size passwd 33554432 auto-propagate passwd yes enable-cache group yes positive-time-to-live group 3600 negative-time-to-live group 60 suggested-size group 211 check-files group yes persistent group yes shared group yes max-db-size group 33554432 auto-propagate group yes enable-cache hosts yes positive-time-to-live hosts 3600 negative-time-to-live hosts 20 suggested-size hosts 211 check-files hosts yes persistent hosts yes shared hosts yes max-db-size hosts 33554432 enable-cache services yes positive-time-to-live services 28800 negative-time-to-live services 20 suggested-size services 211 check-files services yes persistent services yes shared services yes max-db-size services 33554432 resolv.conf # Generated by dhcpcd from eth0 nameserver 127.0.0.1 domain westell.com nameserver 192.168.1.1 nameserver 208.67.222.222 nameserver 208.67.220.220 as kind of a side note I'm using archlinux.

    Read the article

  • Apple Airport Express, Extreme and Time Capsules, BT Home Hub, Wireless Extenders confusion

    - by Jamie Hartnoll
    I post quite frequently in Stack Overflow, but use Superuser less frequently. Mainly as I don't change hardware often and rarely have software issues! I live in a small stone cottage, and have an office in a separate building across a yard. I have a BT Homehub which is located in the cottage and a series of Ethernet cables running across the yard to the office. This is fine for my wired stuff. My main office computers are PCs running Windows 7 Ultimate, and one on Win7 Home, all working fine. I also have an old laptop on Win XP which works fine wirelessly in the house for those evenings in front of the TV catching up on a bit of work. I also have an iPhone and an iPad. Recently, I have been trying to get WiFi in the office so I can use Adobe Shadow (or whatever it now is!) to improve mobile web development efficiency using my iPhone and iPad, so I bought this: http://www.ebuyer.com/393462-zyxel-wre2205-500mbps-powerline-wireless-n300-range-extender-wre2205-gb0101f Thinking that would be lovely just plugged into the socket by the door in the office, extending the perimeter of the WiFi from my Homehub. I can't get it to work properly! If I plug a laptop into its ethernet port I can get it to connect to the Homehub and give me a kinda of wired, wireless extender. If, however, I plug the ethernet port into my home hub, it then seems to extend the network, but only my iOs devices work, and all my wired stuff stops working, and seems to create an infinite loop where windows connects to my homehob, and then rather to the internet, it then connects back to the extender thing. Anyway... in the meantime, I took a fatal trip to the Apple Store, where I purchased an Airport Express... solely for the purpose of hooking my iOs devices up as wireless music players in the house. I knew it had WiFi, but didn't want to use that part as an extender, I didn't think it would work on a Homehub anyway. It doesn't work on a Homehub! I now have a new wireless network in the house, which, when anything connects to it cannot connect to the Internet, so it works ONLY as a wireless music player. I then borrowed some Powerline Adaptors from someone and realised that this whole thing was getting totally out of control! It seems all the technology is out there but it's so complicated to get the right series of devices. To further add to the confusion, I wouldn't mind a network hard drive. I bought one that broke and lost everything, so now we're on to looking at the Apple Time Capsules. So my question is... IF... I buy an Apple Time Capsule, can I: Hook that up to my Homehub, leaving the homehub connected to the Internet so my Hub phones still work, then disable wireless on the homehub Link up my Airport Express to the Time Capsule PROPERLY so it will connect to the Internet Do the above with an Apple TV box should I buy one in future Use the Time Capsule as a network hard drive to store video and music that can be viewed/listened to via my iOS devices/Apple TV/Aiport Express anywhere even with my main PC off (this currently stores all this data) Hope that the IOS devices like the WiFi from the TimeCapsule better than the Homehub and work without extension, or buy another Airport Express to get WiFI in the office. Or... should I buy an Airport Extreme and use a USB hard drive for the network drive?

    Read the article

  • Windows Backup fails with 0x80070002: "The system cannot find the file specified"

    - by James Johnston
    Windows 7 Backup is failing. When backing up even a single insignificant directory (e.g. I chose only the empty "Contacts" directory, leaving all other directories unchecked), I get this error within a few seconds and the backup fails. If I uncheck all files/directories, and just do the system image - then the system image is backed up OK without issue. Backup destination is an external USB hard drive. Steps to reproduce and subsequent failure: Set up backup to go to external hard drive. Don't back up system image. Back up "Contacts" directory only for my profile. Start backup. Immediately view the status of the backup, it stays on "Creating a shadow copy..." for a few seconds, and then the backup fails. Click Options button, and it says "Check your backup / The system cannot find the file specified." - with options to "Try to run backup again" or "Change backup settings". If I click "Show Details", then it says: Backup time: 4/12/2012 04:38 Backup location: My Book (D:) Error code: 0x80070002 An examination of the Event Log shows nothing useful beyond the following: Log Name: Application Source: Windows Backup Date: 4/12/2012 04:38:44 Event ID: 4104 Task Category: None Level: Error Keywords: Classic User: N/A Computer: JTJLaptop Description: The backup was not successful. The error is: The system cannot find the file specified. (0x80070002). Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Windows Backup" /> <EventID Qualifiers="0">4104</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-04-12T04:38:44.000000000Z" /> <EventRecordID>23979</EventRecordID> <Channel>Application</Channel> <Computer>JTJLaptop</Computer> <Security /> </System> <EventData> <Data>The system cannot find the file specified. (0x80070002)</Data> <Binary>02000780E30500003F0900005B090000420ED1665C2BEE174B64529CB14610EA71000000</Binary> </EventData> </Event> What I have tried: ChkDsk on both C: (main drive) and D: (backup drive) doesn't find any errors. Running SFC /SCANNOW to run system file checker Checked the list of profiles at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList and ensured that each profile directory exists. I'm stumped; WHAT file can't be found and why is my backup failing? This is on a Lenovo T420 laptop.

    Read the article

  • How to configure emacs by using this file?

    - by Andy Leman
    From http://public.halogen-dg.com/browser/alex-emacs-settings/.emacs?rev=1346 I got: (setq load-path (cons "/home/alex/.emacs.d/" load-path)) (setq load-path (cons "/home/alex/.emacs.d/configs/" load-path)) (defconst emacs-config-dir "~/.emacs.d/configs/" "") (defun load-cfg-files (filelist) (dolist (file filelist) (load (expand-file-name (concat emacs-config-dir file))) (message "Loaded config file:%s" file) )) (load-cfg-files '("cfg_initsplit" "cfg_variables_and_faces" "cfg_keybindings" "cfg_site_gentoo" "cfg_conf-mode" "cfg_mail-mode" "cfg_region_hooks" "cfg_apache-mode" "cfg_crontab-mode" "cfg_gnuserv" "cfg_subversion" "cfg_css-mode" "cfg_php-mode" "cfg_tramp" "cfg_killbuffer" "cfg_color-theme" "cfg_uniquify" "cfg_tabbar" "cfg_python" "cfg_ack" "cfg_scpaste" "cfg_ido-mode" "cfg_javascript" "cfg_ange_ftp" "cfg_font-lock" "cfg_default_face" "cfg_ecb" "cfg_browser" "cfg_orgmode" ; "cfg_gnus" ; "cfg_cyrillic" )) ; enable disabled advanced features (put 'downcase-region 'disabled nil) (put 'scroll-left 'disabled nil) (put 'upcase-region 'disabled nil) ; narrow cursor ;(setq-default cursor-type 'hbar) (cua-mode) ; highlight current line (global-hl-line-mode 1) ; AV: non-aggressive scrolling (setq scroll-conservatively 100) (setq scroll-preserve-screen-position 't) (setq scroll-margin 0) (custom-set-variables ;; custom-set-variables was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(ange-ftp-passive-host-alist (quote (("redbus2.chalkface.com" . "on") ("zope.halogen-dg.com" . "on") ("85.119.217.50" . "on")))) '(blink-cursor-mode nil) '(browse-url-browser-function (quote browse-url-firefox)) '(browse-url-new-window-flag t) '(buffers-menu-max-size 30) '(buffers-menu-show-directories t) '(buffers-menu-show-status nil) '(case-fold-search t) '(column-number-mode t) '(cua-enable-cua-keys nil) '(user-mail-address "[email protected]") '(cua-mode t nil (cua-base)) '(current-language-environment "UTF-8") '(file-name-shadow-mode t) '(fill-column 79) '(grep-command "grep --color=never -nHr -e * | grep -v .svn --color=never") '(grep-use-null-device nil) '(inhibit-startup-screen t) '(initial-frame-alist (quote ((width . 80) (height . 40)))) '(initsplit-customizations-alist (quote (("tabbar" "configs/cfg_tabbar.el" t) ("ecb" "configs/cfg_ecb.el" t) ("ange\\-ftp" "configs/cfg_ange_ftp.el" t) ("planner" "configs/cfg_planner.el" t) ("dired" "configs/cfg_dired.el" t) ("font\\-lock" "configs/cfg_font-lock.el" t) ("speedbar" "configs/cfg_ecb.el" t) ("muse" "configs/cfg_muse.el" t) ("tramp" "configs/cfg_tramp.el" t) ("uniquify" "configs/cfg_uniquify.el" t) ("default" "configs/cfg_font-lock.el" t) ("ido" "configs/cfg_ido-mode.el" t) ("org" "configs/cfg_orgmode.el" t) ("gnus" "configs/cfg_gnus.el" t) ("nnmail" "configs/cfg_gnus.el" t)))) '(ispell-program-name "aspell") '(jabber-account-list (quote (("[email protected]")))) '(jabber-nickname "AVK") '(jabber-password nil) '(jabber-server "halogen-dg.com") '(jabber-username "alex") '(remember-data-file "~/Plans/remember.org") '(safe-local-variable-values (quote ((dtml-top-element . "body")))) '(save-place t nil (saveplace)) '(scroll-bar-mode (quote right)) '(semantic-idle-scheduler-idle-time 432000) '(show-paren-mode t) '(svn-status-hide-unmodified t) '(tool-bar-mode nil nil (tool-bar)) '(transient-mark-mode t) '(truncate-lines f) '(woman-use-own-frame nil)) ; ?? ????? ??????? y ??? n? (fset 'yes-or-no-p 'y-or-n-p) (custom-set-faces ;; custom-set-faces was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(compilation-error ((t (:foreground "tomato" :weight bold)))) '(cursor ((t (:background "red1")))) '(custom-variable-tag ((((class color) (background dark)) (:inherit variable-pitch :foreground "DarkOrange" :weight bold)))) '(hl-line ((t (:background "grey24")))) '(isearch ((t (:background "orange" :foreground "black")))) '(message-cited-text ((((class color) (background dark)) (:foreground "SandyBrown")))) '(message-header-name ((((class color) (background dark)) (:foreground "DarkGrey")))) '(message-header-other ((((class color) (background dark)) (:foreground "LightPink2")))) '(message-header-subject ((((class color) (background dark)) (:foreground "yellow2")))) '(message-separator ((((class color) (background dark)) (:foreground "thistle")))) '(region ((t (:background "brown")))) '(tooltip ((((class color)) (:inherit variable-pitch :background "IndianRed1" :foreground "black"))))) The above is a python emacs configure file. Where should I put it to use it? And, are there any other changes I need to make?

    Read the article

  • virturalmin webmin dose not respond

    - by Miranda
    I have installed Virtualmin on a CentOS remote server, but it dose not seem to work https://115.146.95.118:10000/ at least the Webmin page dose not work. I have opened those ports http ALLOW 80:80 from 0.0.0.0/0 ALLOW 443:443 from 0.0.0.0/0 ssh ALLOW 22:22 from 0.0.0.0/0 virtualmin ALLOW 20000:20000 from 0.0.0.0/0 ALLOW 10000:10009 from 0.0.0.0/0 And restarting Webmin dose not solve it: /etc/rc.d/init.d/webmin restart Stopping Webmin server in /usr/libexec/webmin Starting Webmin server in /usr/libexec/webmin And I have tried to use Amazon EC2 this time, still couldn't get it to work. http://ec2-67-202-21-21.compute-1.amazonaws.com:10000/ [ec2-user@ip-10-118-239-13 ~]$ netstat -an | grep :10000 tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTEN udp 0 0 0.0.0.0:10000 0.0.0.0:* [ec2-user@ip-10-118-239-13 ~]$ sudo iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:20 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:21 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:53 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:20000 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:10000 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:993 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:143 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:995 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:20 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:587 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Since I need more than 10 reputation to post image, you can find the screenshots of the security group setting at the Webmin Support Forum. I have tried: sudo iptables -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT It did not change anything. [ec2-user@ip-10-118-239-13 ~]$ sudo yum install openssl perl-Net-SSLeay perl-Crypt-SSLeay Loaded plugins: fastestmirror, priorities, security, update-motd Loading mirror speeds from cached hostfile * amzn-main: packages.us-east-1.amazonaws.com * amzn-updates: packages.us-east-1.amazonaws.com amzn-main | 2.1 kB 00:00 amzn-updates | 2.3 kB 00:00 Setting up Install Process Package openssl-1.0.0j-1.43.amzn1.i686 already installed and latest version Package perl-Net-SSLeay-1.35-9.4.amzn1.i686 already installed and latest version Package perl-Crypt-SSLeay-0.57-16.4.amzn1.i686 already installed and latest version Nothing to do [ec2-user@ip-10-118-239-13 ~]$ nano /etc/webmin/miniserv.conf GNU nano 2.0.9 File: /etc/webmin/miniserv.conf port=10000 root=/usr/libexec/webmin mimetypes=/usr/libexec/webmin/mime.types addtype_cgi=internal/cgi realm=Webmin Server logfile=/var/webmin/miniserv.log errorlog=/var/webmin/miniserv.error pidfile=/var/webmin/miniserv.pid logtime=168 ppath= ssl=1 env_WEBMIN_CONFIG=/etc/webmin env_WEBMIN_VAR=/var/webmin atboot=1 logout=/etc/webmin/logout-flag listen=10000 denyfile=\.pl$ log=1 blockhost_failures=5 blockhost_time=60 syslog=1 session=1 server=MiniServ/1.585 userfile=/etc/webmin/miniserv.users keyfile=/etc/webmin/miniserv.pem passwd_file=/etc/shadow passwd_uindex=0 passwd_pindex=1 passwd_cindex=2 passwd_mindex=4 passwd_mode=0 preroot=virtual-server-theme passdelay=1 sessiononly=/virtual-server/remote.cgi preload= mobile_preroot=virtual-server-mobile mobile_prefixes=m. mobile. anonymous=/virtualmin-mailman/unauthenticated=anonymous ssl_cipher_list=ECDHE-RSA-AES256-SHA384:AES256-SHA256:AES256-SHA256:RC4:HIGH:MEDIUM:+TLSv1:!MD5:!SSLv2:+SSLv3:!ADH:!aNULL:!eNULL:!NULL:!DH:!ADH:!EDH:!AESGCM

    Read the article

  • dns queries not using nscd for caching

    - by xenoterracide
    I'm trying to use nscd (Nameservices Cache Daemon) to cache dns locally so I can stop using bind to do it. I've gotten it started and ntpd seems to attempt to use it. But everything else for hosts seems to ignore it. e.g if I do dig apache.org 3 times none of them will hit the cache. I'm viewing the cache stats using nscd -g to determine whether it's been used. I've also turned the debug log level up to see if I can see it hitting and the queries don't even hit nscd. nsswitch.conf # Begin /etc/nsswitch.conf passwd: files group: files shadow: files publickey: files hosts: cache files dns networks: files protocols: files services: files ethers: files rpc: files netgroup: files # End /etc/nsswitch.confenter code here nscd.conf # # /etc/nscd.conf # # An example Name Service Cache config file. This file is needed by nscd. # # Legal entries are: # # logfile <file> # debug-level <level> # threads <initial #threads to use> # max-threads <maximum #threads to use> # server-user <user to run server as instead of root> # server-user is ignored if nscd is started with -S parameters # stat-user <user who is allowed to request statistics> # reload-count unlimited|<number> # paranoia <yes|no> # restart-interval <time in seconds> # # enable-cache <service> <yes|no> # positive-time-to-live <service> <time in seconds> # negative-time-to-live <service> <time in seconds> # suggested-size <service> <prime number> # check-files <service> <yes|no> # persistent <service> <yes|no> # shared <service> <yes|no> # max-db-size <service> <number bytes> # auto-propagate <service> <yes|no> # # Currently supported cache names (services): passwd, group, hosts, services # logfile /var/log/nscd.log threads 4 max-threads 32 server-user nobody # stat-user somebody debug-level 9 # reload-count 5 paranoia no # restart-interval 3600 enable-cache passwd yes positive-time-to-live passwd 600 negative-time-to-live passwd 20 suggested-size passwd 211 check-files passwd yes persistent passwd yes shared passwd yes max-db-size passwd 33554432 auto-propagate passwd yes enable-cache group yes positive-time-to-live group 3600 negative-time-to-live group 60 suggested-size group 211 check-files group yes persistent group yes shared group yes max-db-size group 33554432 auto-propagate group yes enable-cache hosts yes positive-time-to-live hosts 3600 negative-time-to-live hosts 20 suggested-size hosts 211 check-files hosts yes persistent hosts yes shared hosts yes max-db-size hosts 33554432 enable-cache services yes positive-time-to-live services 28800 negative-time-to-live services 20 suggested-size services 211 check-files services yes persistent services yes shared services yes max-db-size services 33554432 resolv.conf # Generated by dhcpcd from eth0 nameserver 127.0.0.1 domain westell.com nameserver 192.168.1.1 nameserver 208.67.222.222 nameserver 208.67.220.220 as kind of a side note I'm using archlinux.

    Read the article

  • Samba with Active Directory - shares are readonly, NT_STATUS_MEDIA_WRITE_PROTECTED

    - by froh42
    I've set a samba server that seems to work, all shares are seemingly exported as readonly, however. The machine is called "lx". When I'm on lx I can run the following command: froh@lx:~$ smbclient //lx/export -UAdministrator Enter Administrator's password: Domain=[CUSTOMER] OS=[Unix] Server=[Samba 3.5.4] smb: \> mkdir wrzlbrmpf NT_STATUS_MEDIA_WRITE_PROTECTED making remote directory \wrzlbrmpf smb: \> ls . D 0 Fri Dec 3 19:04:20 2010 .. D 0 Sun Nov 28 01:32:37 2010 zork D 0 Fri Dec 3 18:53:33 2010 bar D 0 Sun Nov 28 23:52:43 2010 ork 1 Fri Dec 3 18:53:02 2010 foo 1 Sun Nov 28 23:52:41 2010 gaga D 0 Fri Dec 3 19:04:20 2010 How can I troubleshoot this? What I did: First I set up a fresh install of Ubuntu 10.10 x64. Second I got kerberos working with the following krb5.conf file: [libdefaults] ticket_lifetime = 24000 clock_skew = 300 default_realm = CUSTOMER.LOCAL [realms] CUSTOMER.LOCAL = { kdc = SB4.customer.local:88 admin_server = SB4.customer.local:464 default_domain = CUSTOMER.LOCAL } [domain_realm] .customer.local = CUSTOMER.LOCAL customer.local = CUSTOMER.LOCAL #[login] # krb4_convert = true # krb4_get_tickets = false I also added winbind to group, passwd and shadow in nsswitch.conf. Seemingly Kerberos works: root@lx:~# net ads testjoin Join is OK root@lx:~# wbinfo -a 'Administrator%MYSECRETPASSWORD' plaintext password authentication succeeded challenge/response password authentication succeeded wbinfo -u and wbinfo -g also spit out a list of users and a list of groups respectiveley. I noted that domain accounts did NOT include a domain and they are in german (as on the SBS 2003 that is the domain server). So I get a "Domänenbenutzer" in wbinfo -u's output not a "CUSTOMER+Domain User" or something similar. I'm not sure anymore what I did to the PAM configuration, but here is what I currently have: root@lx:/etc/pam.d# cat samba @include common-auth @include common-account @include common-session-noninteractive root@lx:/etc/pam.d# grep -ve '^#' common-auth auth [success=3 default=ignore] pam_krb5.so minimum_uid=1000 auth [success=2 default=ignore] pam_unix.so nullok_secure try_first_pass auth [success=1 default=ignore] pam_winbind.so krb5_auth krb5_ccache_type=FILE cached_login try_first_pass auth requisite pam_deny.so auth required pam_permit.so root@lx:/etc/pam.d# grep -ve '^#' common-account account [success=2 new_authtok_reqd=done default=ignore] pam_unix.so account [success=1 new_authtok_reqd=done default=ignore] pam_winbind.so account requisite pam_deny.so account required pam_permit.so account required pam_krb5.so minimum_uid=1000 root@lx:/etc/pam.d# grep -ve '^#' common-session-noninteractive session [default=1] pam_permit.so session requisite pam_deny.so session required pam_permit.so session optional pam_krb5.so minimum_uid=1000 session required pam_unix.so session optional pam_winbind.so At some point I joined the linux box into the AD domain. After (manually) creating a home directory on the linux box I can log in using the Adminstrator user with the password taken from AD. Now I run samba with the following setup: [global] netbios name = LX realm = CUSTOMER.LOCAL workgroup = CUSTOMER security = ADS encrypt passwords = yes password server = 192.168.20.244 #IP des Domain Controllers os level = 0 socket options = TCP_NODELAY SO_RCVBUF=16384 SO_SNDBUF=16384 idmap uid = 10000-20000 idmap gid = 10000-20000 winbind enum users = Yes winbind enum groups = Yes preferred master = no winbind separator = + dns proxy = no wins proxy = no # client NTLMv2 auth = Yes log level = 2 logfile = /var/log/samba/log.smbd.%U template homedir = /home/%U template shell = /bin/bash [export] path = /mnt/sdc1/export read only = No public = Yes Currently I don't care whether export is exported to everyone or just one user, I want to see somebody WRITING to that directory before I start fiddling with the authentication settings. (Who may access it). As mentioned, accessing the share from smbclient results in this NT_STATUS_MEDIA_WRITE_PROTECTED . Accessing it from windows shows ACLs that look correct (The user may write) - but it does not work, I can only read files not write. The directory to be exported looks like this: root@lx:/etc/pam.d# ls -ld /mnt/ drwxr-xr-x 5 root root 4096 2010-11-28 01:29 /mnt/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/ drwxr-xr-x 4 froh froh 4096 2010-11-28 01:32 /mnt/sdc1/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/export/ drwxrwxrwx+ 5 administrator domänen-admins 4096 2010-12-03 19:04 /mnt/sdc1/export/ root@lx:/etc/pam.d# getfacl /mnt/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/ # owner: root # group: root user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/ # owner: froh # group: froh user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/export/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/export/ # owner: administrator # group: domänen-admins user::rwx group::rwx group:domänen-admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:domänen-admins:rwx default:mask::rwx default:other::rwx My, oh my what am I overlooking? What am I to blind to see?

    Read the article

  • Samba with Active Directory - shares are readonly, NT_STATUS_MEDIA_WRITE_PROTECTED

    - by froh42
    I've set a samba server that seems to work, all shares are seemingly exported as readonly, however. The machine is called "lx". When I'm on lx I can run the following command: froh@lx:~$ smbclient //lx/export -UAdministrator Enter Administrator's password: Domain=[CUSTOMER] OS=[Unix] Server=[Samba 3.5.4] smb: \> mkdir wrzlbrmpf NT_STATUS_MEDIA_WRITE_PROTECTED making remote directory \wrzlbrmpf smb: \> ls . D 0 Fri Dec 3 19:04:20 2010 .. D 0 Sun Nov 28 01:32:37 2010 zork D 0 Fri Dec 3 18:53:33 2010 bar D 0 Sun Nov 28 23:52:43 2010 ork 1 Fri Dec 3 18:53:02 2010 foo 1 Sun Nov 28 23:52:41 2010 gaga D 0 Fri Dec 3 19:04:20 2010 How can I troubleshoot this? What I did: First I set up a fresh install of Ubuntu 10.10 x64. Second I got kerberos working with the following krb5.conf file: [libdefaults] ticket_lifetime = 24000 clock_skew = 300 default_realm = CUSTOMER.LOCAL [realms] CUSTOMER.LOCAL = { kdc = SB4.customer.local:88 admin_server = SB4.customer.local:464 default_domain = CUSTOMER.LOCAL } [domain_realm] .customer.local = CUSTOMER.LOCAL customer.local = CUSTOMER.LOCAL #[login] # krb4_convert = true # krb4_get_tickets = false I also added winbind to group, passwd and shadow in nsswitch.conf. Seemingly Kerberos works: root@lx:~# net ads testjoin Join is OK root@lx:~# wbinfo -a 'Administrator%MYSECRETPASSWORD' plaintext password authentication succeeded challenge/response password authentication succeeded wbinfo -u and wbinfo -g also spit out a list of users and a list of groups respectiveley. I noted that domain accounts did NOT include a domain and they are in german (as on the SBS 2003 that is the domain server). So I get a "Domänenbenutzer" in wbinfo -u's output not a "CUSTOMER+Domain User" or something similar. I'm not sure anymore what I did to the PAM configuration, but here is what I currently have: root@lx:/etc/pam.d# cat samba @include common-auth @include common-account @include common-session-noninteractive root@lx:/etc/pam.d# grep -ve '^#' common-auth auth [success=3 default=ignore] pam_krb5.so minimum_uid=1000 auth [success=2 default=ignore] pam_unix.so nullok_secure try_first_pass auth [success=1 default=ignore] pam_winbind.so krb5_auth krb5_ccache_type=FILE cached_login try_first_pass auth requisite pam_deny.so auth required pam_permit.so root@lx:/etc/pam.d# grep -ve '^#' common-account account [success=2 new_authtok_reqd=done default=ignore] pam_unix.so account [success=1 new_authtok_reqd=done default=ignore] pam_winbind.so account requisite pam_deny.so account required pam_permit.so account required pam_krb5.so minimum_uid=1000 root@lx:/etc/pam.d# grep -ve '^#' common-session-noninteractive session [default=1] pam_permit.so session requisite pam_deny.so session required pam_permit.so session optional pam_krb5.so minimum_uid=1000 session required pam_unix.so session optional pam_winbind.so At some point I joined the linux box into the AD domain. After (manually) creating a home directory on the linux box I can log in using the Adminstrator user with the password taken from AD. Now I run samba with the following setup: [global] netbios name = LX realm = CUSTOMER.LOCAL workgroup = CUSTOMER security = ADS encrypt passwords = yes password server = 192.168.20.244 #IP des Domain Controllers os level = 0 socket options = TCP_NODELAY SO_RCVBUF=16384 SO_SNDBUF=16384 idmap uid = 10000-20000 idmap gid = 10000-20000 winbind enum users = Yes winbind enum groups = Yes preferred master = no winbind separator = + dns proxy = no wins proxy = no # client NTLMv2 auth = Yes log level = 2 logfile = /var/log/samba/log.smbd.%U template homedir = /home/%U template shell = /bin/bash [export] path = /mnt/sdc1/export read only = No public = Yes Currently I don't care whether export is exported to everyone or just one user, I want to see somebody WRITING to that directory before I start fiddling with the authentication settings. (Who may access it). As mentioned, accessing the share from smbclient results in this NT_STATUS_MEDIA_WRITE_PROTECTED . Accessing it from windows shows ACLs that look correct (The user may write) - but it does not work, I can only read files not write. The directory to be exported looks like this: root@lx:/etc/pam.d# ls -ld /mnt/ drwxr-xr-x 5 root root 4096 2010-11-28 01:29 /mnt/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/ drwxr-xr-x 4 froh froh 4096 2010-11-28 01:32 /mnt/sdc1/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/export/ drwxrwxrwx+ 5 administrator domänen-admins 4096 2010-12-03 19:04 /mnt/sdc1/export/ root@lx:/etc/pam.d# getfacl /mnt/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/ # owner: root # group: root user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/ # owner: froh # group: froh user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/export/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/export/ # owner: administrator # group: domänen-admins user::rwx group::rwx group:domänen-admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:domänen-admins:rwx default:mask::rwx default:other::rwx My, oh my what am I overlooking? What am I to blind to see?

    Read the article

  • WCF service dataContractSerializer maxItemsInObjectGraph in web.config

    - by Dave
    I am having issues specifying the dataContractSerializer maxItemsInObjectGraph in host's web.config. <behaviors> <serviceBehaviors> <behavior name="beSetting"> <serviceMetadata httpGetEnabled="True"/> <serviceDebug includeExceptionDetailInFaults="True" /> <dataContractSerializer maxItemsInObjectGraph="2147483646"/> </behavior> </serviceBehaviors> </behaviors> <services> <service name="MyNamespace.MyService" behaviorConfiguration="beSetting" > <endpoint address="http://localhost/myservice/" binding="webHttpBinding" bindingConfiguration="webHttpBinding1" contract="MyNamespace.IMyService" bindingNamespace="MyNamespace"> </endpoint> </service> </services> The above has no effect on my data pull. The server times out because of the large volume of data. I can however specify the max limit in code and that works [ServiceBehavior(MaxItemsInObjectGraph=2147483646, IncludeExceptionDetailInFaults = true)] public abstract class MyService : MyService { blah... } Does anyone know why I can't make this work through a web.config setting? I would like to keep in the web.config so it is easier for future updates.

    Read the article

  • Azure - Unable To Get SQL Azure Invitation Code!

    - by Goober
    Scenario I'm trying to convert my Silverlight Business Application over to the cloud with the help of Azure. I have been following this link from Brad Abrams blog. Both the links to Windows Azure and SQL Azure crash out in Google Chrome, they work in Internet Explorer, but it's literally one of the worst user experiences I've ever had. The Problem I'm asked to sign in to Microsoft connect with my Live ID. I do so, I'm then asked to register!? - I do so. I'm then sent a verification email which I verify. I'm then signed out!?!?! When I sign back in, it repeats the process.... ANY IDEAS!??! Edit/Update: Finally managed to get signed up/in to connect. From here I was able to get hold of an invitation code to Windows Azure. Now I need an invitation code for SQL Azure. I cannot see ANYWHERE that advertises a way of getting this SQL Azure code, the only thing that I have seen is some text saying that there "may be a delay" in receiving codes due to volume of interest, which quite frankly I find hard to believe......... It's so far been 3 days now.This officially Sucks! If I have any more news I'll post back here.

    Read the article

  • Sample code from apple iPhoneMultichannelMixerTest can't run mp3 file

    - by Usman
    Hi i want to control channel volume from my app and iPhoneMultichannelMixerTest (http://developer.apple.com/iphone/library/samplecode/iPhoneMultichannelMixerTest/)sample code form apple looks perfect for me. but i m heaving problem in playing mp3 files. code crashes in MultichannelMixerController.m at static OSStatus renderInput(void *inRefCon, AudioUnitRenderActionFlags *ioActionFlags, const AudioTimeStamp *inTimeStamp, UInt32 inBusNumber, UInt32 inNumberFrames, AudioBufferList *ioData) { SoundBufferPtr sndbuf = (SoundBufferPtr)inRefCon; UInt32 bufSamples = sndbuf[inBusNumber].numFrames; AudioUnitSampleType *in = sndbuf[inBusNumber].data; AudioUnitSampleType *outA = (AudioUnitSampleType *)ioData->mBuffers[0].mData; AudioUnitSampleType *outB = (AudioUnitSampleType *)ioData->mBuffers[1].mData; UInt32 sample = sndbuf[inBusNumber].sampleNum; for (UInt32 i = 0; i < inNumberFrames; ++i) { if (1 == inBusNumber) { outA[i] = 0; outB[i] = in[sample++]; //crash on this line. } else { outA[i] = in[sample++]; outB[i] = 0; } if (sample >= bufSamples) sample = 0; } sndbuf[inBusNumber].sampleNum = sample; // printf("bus %d sample %d\n", inBusNumber, sample); return noErr; } can any one tell me why this is happening. or is there any limitation to play mp3 on iPhone??? Thankz in Adv. Usman

    Read the article

  • Restore DB - Error RESTORE HEADERONLY is terminating abnormally.

    - by Jordon
    I have taken backup of SQL Server 2008 DB on server, and download them to local environment. I am trying to restore that database and it is keep on giving me following error. An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) ------------------------------ ADDITIONAL INFORMATION: The media family on device 'C:\go4sharepoint_1384_8481.bak' is incorrectly formed. SQL Server cannot process this media family. RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3241) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.4053&EvtSrc=MSSQLServer&EvtID=3241&LinkId=20476 I have tried to create a temp DB on server and tried to restore the same backup file and that works. I have also tried no. of times downloading file from server to local pc using different options on Filezila (Auto, Binary) But its not working. After that I tried to execute following command on server. BACKUP DATABASE go4sharepoint_1384_8481 TO DISK=' C:\HostingSpaces\dbname_jun14_2010_new.bak' with FORMAT And it is giving me following error. Msg 3201, Level 16, State 1, Line 1 Cannot open backup device 'c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Backup\ C:\HostingSpaces\dbname_jun14_2010_new.bak'. Operating system error 123(The filename, directory name, or volume label syntax is incorrect.). Msg 3013, Level 16, State 1, Line 1 BACKUP DATABASE is terminating abnormally. After researching I found following 2 useful links 1) http://support.microsoft.com/kb/290787 2) http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/4d5836f6-be65-47a1-ad5d-c81caaf1044f But still I can't able to restore Database correctly. Any help would be much appreciated thanks.

    Read the article

  • Restore DB - Error RESTORE HEADERONLY is terminating abnormally

    - by Jordon Willis
    I have taken backup of SQL Server 2008 DB on server, and download them to local environment. I am trying to restore that database and it is keep on giving me following error. An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) ------------------------------ ADDITIONAL INFORMATION: The media family on device 'C:\go4sharepoint_1384_8481.bak' is incorrectly formed. SQL Server cannot process this media family. RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3241) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.4053&EvtSrc=MSSQLServer&EvtID=3241&LinkId=20476 I have tried to create a temp DB on server and tried to restore the same backup file and that works. I have also tried no. of times downloading file from server to local pc using different options on Filezila (Auto, Binary) But its not working. After that I tried to execute following command on server. BACKUP DATABASE go4sharepoint_1384_8481 TO DISK=' C:\HostingSpaces\dbname_jun14_2010_new.bak' with FORMAT It is giving me following error: Msg 3201, Level 16, State 1, Line 1 Cannot open backup device 'c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Backup\ C:\HostingSpaces\dbname_jun14_2010_new.bak'. Operating system error 123(The filename, directory name, or volume label syntax is incorrect.). Msg 3013, Level 16, State 1, Line 1 BACKUP DATABASE is terminating abnormally. After researching I found the following 2 useful links: http://support.microsoft.com/kb/290787 http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/4d5836f6-be65-47a1-ad5d-c81caaf1044f But I am still not able to restore Database correctly. Any help would be much appreciated. Thanks.

    Read the article

  • Ext3 fs: Block bitmap for group 1 not in group (block 0). is fs dead?

    - by ip
    Hi, My company has a server with one big partition with Mysql database and php files. Now this partition seems to be corrupted, as reported from kernel messages when I tried to mount it manually: [329862.817837] EXT3-fs error (device loop1): ext3_check_descriptors: Block bitmap for group 1 not in group (block 0)! [329862.817846] EXT3-fs: group descriptors corrupted! I've tried to recovery it running tools from a PLD livecd. These are the tools I have tested: - e2retrieve - testdisk - photorec - dd_rescue/dd_rhelp - ddrescue - fsck.ext2 - e2salvage without any success. dumpe2fs 1.41.3 (12-Oct-2008) Filesystem volume name: /dev/sda3 Last mounted on: <not available> Filesystem UUID: dd51610b-6de0-4392-a6f3-67160dbc0343 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal filetype sparse_super Default mount options: (none) Filesystem state: not clean with errors Errors behavior: Continue Filesystem OS type: Linux Inode count: 9502720 Block count: 18987570 Reserved block count: 949378 Free blocks: 11555345 Free inodes: 11858398 First block: 0 Block size: 4096 Fragment size: 4096 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 16384 Inode blocks per group: 512 Last mount time: Wed Mar 24 09:31:03 2010 Last write time: Mon Apr 12 11:46:32 2010 Mount count: 10 Maximum mount count: 30 Last checked: Thu Jan 1 01:00:00 1970 Check interval: 0 (<none>) Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 128 Journal inode: 8 Journal backup: inode blocks dumpe2fs: A block group is missing an inode table while reading journal inode There's any other tools I have to test before considering these disk definitely unrecoverable? Many thanks, ip

    Read the article

  • C# Design How to Elegantly wrap a DAL class

    - by guazz
    I have an application which uses MyGeneration's dOODads ORM to generate it's Data Access Layer. dOODad works by generating a persistance class for each table in the database. It works like so: // Load and Save Employees emps = new Employees(); if(emps.LoadByPrimaryKey(42)) { emps.LastName = "Just Got Married"; emps.Save(); } // Add a new record Employees emps = new Employees(); emps.AddNew(); emps.FirstName = "Mr."; emps.LastName = "dOOdad"; emps.Save(); // After save the identity column is already here for me. int i = emps.EmployeeID; // Dynamic Query - All Employees with 'A' in thier last name Employees emps = new Employees(); emps.Where.LastName.Value = "%A%"; emps.Where.LastName.Operator = WhereParameter.Operand.Like; emps.Query.Load(); For the above example(i.e. Employees DAL object) I would like to know what is the best method/technique to abstract some of the implementation details on my classes. I don't believe that an Employee class should have Employees(the DAL) specifics in its methods - or perhaps this is acceptable? Is it possible to implement some form of repository pattern? Bear in mind that this is a high volume, perfomacne critical application. Thanks, j

    Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >