Search Results

Search found 18396 results on 736 pages for 'oracle policy administration'.

Page 407/736 | < Previous Page | 403 404 405 406 407 408 409 410 411 412 413 414  | Next Page >

• Creating static NAT blocks outbound traffic Cisco ASA

  - by natediggs

  Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

  Read the article

• MySQL on Windows - Why, Where and How

  - by bertrand.matthelie(at)oracle.com

  @font-face { font-family: "Arial"; }@font-face { font-family: "Courier New"; }@font-face { font-family: "Wingdings"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }div.Section1 { page: Section1; }ol { margin-bottom: 0cm; }ul { margin-bottom: 0cm; } Over the years Windows has become a major development and deployment platform for MySQL. As a matter of fact, Windows consistently ranks as the #1 development platform in our surveys, and now also ranks higher than any Linux distribution as a deployment platform among MySQL Community Edition users.   We've made various technical resources available in our MySQL on Windows Resource Center including articles, whitepapers and archived webinars. MySQL users are also sharing their experiences and writing how-to articles, and it's great to see former MySQL/Sun/Oracle employees still contributing! Thanks Anders for a recent step-by-step part 1 article on working with MySQL on Windows.   We also got feedback from customers wishing to get higher-level information about MySQL on Windows, to help them and others in their organizations better understand:   ·       Why is the world's most popular open source database so popular on Windows?   ·       What are the applications for which one should consider MySQL on Microsoft's platform?   ·       How should Windows shops relying on Microsoft databases get going with MySQL?   Those are the questions we aim to answer in our guide "MySQL on Windows - Why, Where and How", that you can download here.

  Read the article

• Virtual Box - How to open a .VDI Virtual Machine

  - by [email protected]

   How to open a .VDI Virtual MachineSometimes someone share with us one Virtual machine with extension .VDI, after that we can wonder how and what with?Well the answer is... It is a VirtualBox - Virtual Machine. If you have not downloaded it you can do this easily just follow this post.http://listeningoracle.blogspot.com/2010/04/que-es-virtualbox.htmlor http://oracleoforacle.wordpress.com/2010/04/14/ques-es-virtualbox/Ok, Now with VirtualBox Installed open it and proceed with the following:1. Open the Virtual File Manager. 2. Click on Actions ? Add and select the .VDI file Click "Ok"3. Now we can register the new Virtual Machine - Click New, and Click Next4. Write down a Name for the virtual Machine a proceed to select a Operating System and Version. (In this case it is a Linux (Oracle Enterprise Linux or RedHat)Click Next5. Select the memory amount base for the Virtual Machine (Minimal 1280 for our case) - Click Next6. Select the Disk 11GR2_OEL5_32GB.vdi it was added in the virtual media manager in the step 2. Dont forget let selected Boot hard Disk (Primary Master) . Given it is the only disk assigned to the virtual machine.Click Next7. Click Finish8. This step is important. Once you have click on the settings Button.9. On General option click the advanced settings. Here you must change the default directory to save your Snapshots; my recommendation set it to the same directory where the .Vdi file is. Otherwise you can have the same Virtual Machine and its snapshots in different paths.10. Now Click on System, and proceed to assign the correct memory (If you did not before) Note: Enable "Enable IO APIC" if you are planning to assign more than one CPU to the Virtual Machine.Define the processors for the Virtual machine. If you processor is dual core choose 211. Select the video memory amount you want to assign to the Virtual Machine 12. Associated more storage disk to the Virtual machine, if you have more VDI files. (Not our case)The disk must be selected as IDE Primary Master. 13. Well you can verify the other options, but with these changes you will be able to start the VM.Note: Sometime the VM owner may share some instructions, if so follow his instructions.14. Finally Start the Virtual Machine (Click > Start)

  Read the article

• Salesforce.com s'attaque à Oracle avec Database.com, un service qui veut devenir « l'avenir des bases de données »

  Salesforce.com s'attaque à Oracle avec Database.com Une base de données 100 % hébergée qui veut révolutionner les SGBD Lors de sa conférence Dreamforce, qui se déroule actuellement à San Francisco, Salesforce.com, le plus célèbre éditeur de CRM en mode Cloud, vient de présenter un produit extrêmement ambitieux, qualifié par la société d'« avenir des bases de données ». Il s'agit de Database.com, le premier SGBD 100 % Cloud. La plate-forme veut supprimer les problématiques de l'optimisation et de la maintenance des bases de données et du matériel traditionnels. « Les bases de données Cloud représentent une opportunité majeure pour faciliter ...

  Read the article

• Willy Rotstein on Analytics and Social Media in Retail

  - by sarah.taylor(at)oracle.com

  Recently I came across a presentation from Dan Zarrella on "The Science of Retweets. (http://www.slideshare.net/HubSpot/the-science-of-retweets-with-dan-zarrella). It is an insightful, fact-based analysis of how tweets propagate and what makes them successful. The analysis is of course very interesting for those of us interested Tweeting. However, what really caught my attention is how well it illustrates, form a very different angle, some of the issues I am discussing with retailers these days. In particular the opportunities that e-commerce and social media open to those retailers with the appetite and vision to tackle the associated analytical challenges. And these challenges are of course not straightforward.   In his presentation Dan introduces the concept of Observability, I haven't had the opportunity to discuss with Dan his specific definition for the term. However, in practical retail terms, I would say that it means that through social media (and other web channels such as search) we can analyze and track processes by measuring Indicators that were not measurable before. The focus is in identifying patterns across a large number of consumers rather than what a particular individual "Likes".   The potential impact for retailers is huge. It opens the opportunity to monitor changes in consumer preference  and plan the business accordingly. And you can do this almost "real time" rather than through infrequent surveys that provide a "rear view" picture of your consumer behaviour. For instance, you could envision identifying when a particular set of fashion styles are breaking out from the pack, and commit a re-buy. Or you could monitor when the preference for a specific mobile device has declined and hence markdowns should be considered; or how demand for a specific ready-made food typically flows across regions and manage the inventory accordingly. Search, blogging, website and store data may need to be considered in identifying these trends. The data volumes involved are huge (check Andrea Morgan's recent post on "Big Data" in retail) but so are the benefits. As Andrea says, for the first time we can start getting insight into "Why" the business is performing in a certain way rather than just reporting on what is happening. And it is not just about the data volumes. Tackling the challenge also calls for integrated planning systems that can bring data and insight into the context of the Decision Making process Buyers, Merchandisers and Supply Chain managers are following. I strongly believe that only when data and process come together you can move from the anecdotal to systematically improving business performance.   I would love to hear your opinions on these trends and where you think Retail is heading to exploit these topics - please email me: [email protected]

  Read the article

• Central Banks Rely On MySQL Based Simulator

  - by bertrand.matthelie(at)oracle.com

  @font-face { font-family: "Arial"; }@font-face { font-family: "Courier New"; }@font-face { font-family: "Wingdings"; }@font-face { font-family: "Calibri"; }@font-face { font-family: "Cambria"; }@font-face { font-family: "Garamond"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }span.description { }div.Section1 { page: Section1; }ol { margin-bottom: 0cm; }ul { margin-bottom: 0cm; } We recently published a case study describing how central banks worldwide rely on the Bank of Finland's MySQL based simulator.   The Bank of Finland (BoF) acts as Finland's central bank, national monetary authority, and member of the European System of Central Banks and the Eurosystem. The BoF developed a MySQL based versatile system for making payments and settlement simulations, used for analyzing liquidity needs, risk issues, changes in authority policies & regulations, and more. Running on Windows, the application has been widely adopted by central bank economists worldwide.   The Simulator is managing large data sets and thus needed a robust database as its foundation. Key requirements to select the database included:   ·       Low Costs ·       Performance & Scalability ·       Ease of Use   You can read more about why the Bank of Finland selected MySQL to power its economic simulator in our case study, posted here.   For more information about MySQL on Windows, check out our MySQL on Windows Resource Center, and, join today's Oracle TechCast Live: "MySQL 5.5 Does Windows" with Mike Frank at 10.00 am PT!

  Read the article

• Quantifying the effects of partition mis-alignment

  - by Matt

  I'm experiencing some significant performance issues on an NFS server. I've been reading up a bit on partition alignment, and I think I have my partitions mis-aligned. I can't find anything that tells me how to actually quantify the effects of mis-aligned partitions. Some of the general information I found suggests the performance penalty can be quite high (upwards of 60%) and others say it's negligible. What I want to do is determine if partition alignment is a factor in this server's performance problems or not; and if so, to what degree? So I'll put my info out here, and hopefully the community can confirm if my partitions are indeed mis-aligned, and if so, help me put a number to what the performance cost is. Server is a Dell R510 with dual E5620 CPUs and 8 GB RAM. There are eight 15k 2.5” 600 GB drives (Seagate ST3600057SS) configured in hardware RAID-6 with a single hot spare. RAID controller is a Dell PERC H700 w/512MB cache (Linux sees this as a LSI MegaSAS 9260). OS is CentOS 5.6, home directory partition is ext3, with options “rw,data=journal,usrquota”. I have the HW RAID configured to present two virtual disks to the OS: /dev/sda for the OS (boot, root and swap partitions), and /dev/sdb for a big NFS share: [root@lnxutil1 ~]# parted -s /dev/sda unit s print Model: DELL PERC H700 (scsi) Disk /dev/sda: 134217599s Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 63s 465884s 465822s primary ext2 boot 2 465885s 134207009s 133741125s primary lvm [root@lnxutil1 ~]# parted -s /dev/sdb unit s print Model: DELL PERC H700 (scsi) Disk /dev/sdb: 5720768639s Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 34s 5720768606s 5720768573s lvm Edit 1 Using the cfq IO scheduler (default for CentOS 5.6): # cat /sys/block/sd{a,b}/queue/scheduler noop anticipatory deadline [cfq] noop anticipatory deadline [cfq] Chunk size is the same as strip size, right? If so, then 64kB: # /opt/MegaCli -LDInfo -Lall -aALL -NoLog Adapter #0 Number of Virtual Disks: 2 Virtual Disk: 0 (target id: 0) Name:os RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:65535MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 ... physical disk info removed for brevity ... Virtual Disk: 1 (target id: 1) Name:share RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:2793344MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 If it's not obvious, virtual disk 0 corresponds to /dev/sda, for the OS; virtual disk 1 is /dev/sdb (the exported home directory tree).

  Read the article

• WebCenter Spaces 11g PS2 Template Customization

  - by javier.ductor(at)oracle.com

  Recently, we have been involved in a WebCenter Spaces customization project. Customer sent us a prototype website in HTML, and we had to transform Spaces to set the same look&feel as in the prototype.Protoype:First of all, we downloaded a Virtual Machine with WebCenter Spaces 11g PS2, same version as customer's. The next step was to download ExtendWebCenterSpaces application. This is a webcenter application that customizes several elements of WebCenter Spaces: templates, skins, landing page, etc. jDeveloper configuration is needed, we followed steps described in Extended Guide, this blog was helpful too. . After that, we deployed the application using WebLogic console, we created a new group space and assigned the ExtendedWebCenterSpaces template (portalCentricSiteTemplate) to it. The result was this:As you may see there is a big difference with the prototype, which meant a lot of work to do from our side.So we needed to create a new Spaces template with its skin.Using jDeveloper, we created a new template based on the default template. We removed all menus we did not need and inserted 'include'  tags for header, breadcrumb and footers. Each of these elements was defined in an isolated jspx file.In the beginning, we faced a problem: we had to add code from prototype (in plain HTML) to jspx templates (JSF language). We managed to workaround this issue using 'verbatim' tags with 'CDATA' surrounding HTML code in header, breadcrumb and footers.Once the template was modified, we added css styles to the default skin. So we had some styles from portalCentricSiteTemplate plus styles from customer's prototype.Then, we re-deployed the application, assigned this template to a new group space and checked the result. After testing, we usually found issues, so we had to do some modifications in the application, then it was necessary to re-deploy the application and restart Spaces server. Due to this fact, the testing process takes quite a bit of time.Added to the template and skin customization, we also customized the Landing Page using this application and Members task flow using another application: SpacesTaskflowCustomizationApplication. I will talk about this task flow customization in a future entry.After some issues and workarounds, eventually we managed to get this look&feel in Spaces:P.S. In this customization I was working with Francisco Vega and Jose Antonio Labrada, consultants from Oracle Malaga International Consulting Centre.

  Read the article

• MySQL - Powering Online Media & Entertainment

  - by bertrand.matthelie(at)oracle.com

  @font-face { font-family: "Arial"; }@font-face { font-family: "Courier New"; }@font-face { font-family: "Times"; }@font-face { font-family: "Wingdings"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }p { margin: 0cm 0cm 0.0001pt; font-size: 10pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; }ol { margin-bottom: 0cm; }ul { margin-bottom: 0cm; } If you're reading news, watching videos, or playing games online, you're probably relying on MySQL to do so.   Facebook, YouTube, BBC News, Zynga, thePlatform and many other leading Media & Entertainment organizations chose MySQL to power their online news, gaming, social networking, advertising or other applications.   During the past decade, the Media & Entertainment industry experienced a spectacular transformation.  The mobile Internet is becoming the dominant media platform, and the boundaries between the different types of media (i.e. Print, TV, Radio, Internet) have increasingly blurred as we've gradually come to perform more and more of our daily activities online.   To better understand how MySQL can help you win in the fast paced world of Media & Entertainment, check out our whitepaper "MySQL - Powering The Online Media & Entertainment Industry" in which we cover:   ·       The key trends shaping the evolution of the media & entertainment industry.   ·       Their implications, and the requirements they place on the infrastructure of information & entertainment services providers.   ·       How you can leverage Oracle's MySQL technologies to quickly and cost-effectively deliver new highly scalable and highly available online media & entertainment applications.   You're welcome to download it here.

  Read the article

• Virtual Box - How to open a .VDI Virtual Machine

  - by [email protected]

  TUESDAY, APRIL 27, 2010 How to open a .VDI Virtual MachineSometimes someone share with us one Virtual machine with extension .VDI, after that we can wonder how and what with?Well the answer is... It is a VirtualBox - Virtual Machine. If you have not downloaded it you can do this easily just follow this post.http://listeningoracle.blogspot.com/2010/04/que-es-virtualbox.htmlorhttp://oracleoforacle.wordpress.com/2010/04/14/ques-es-virtualbox/Ok, Now with VirtualBox Installed open it and proceed with the following:1. Open the Virtual File Manager.2. Click on Actions ? Add and select the .VDI fileClick "Ok"3. Now we can register the new Virtual Machine - Click New, and Click Next4. Write down a Name for the virtual Machine a proceed to select a Operating System and Version. (In this case it is a Linux (Oracle Enterprise Linux or RedHat)Click Next5. Select the memory amount base for the Virtual Machine(Minimal 1280 for our case) - Click Next6. Select the Disk 11GR2_OEL5_32GB.vdi it was added in the virtual media manager in the step 2.Dont forget let selected Boot hard Disk (Primary Master) . Given it is the only disk assigned to the virtual machine.Click Next7. Click Finish8. This step is important. Once you have click on the settings Button. 9. On General option click the advanced settings. Here you must change the default directory to save your Snapshots; my recommendation set it to the same directory where the .Vdi file is. Otherwise you can have the same Virtual Machine and its snapshots in different paths.10. Now Click on System, and proceed to assign the correct memory (If you did not before)Note: Enable "Enable IO APIC" if you are planning to assign more than one CPU to the Virtual Machine.Define the processors for the Virtual machine. If you processor is dual core choose 211. Select the video memory amount you want to assign to the Virtual Machine12. Associated more storage disk to the Virtual machine, if you have more VDI files.(Not our case)The disk must be selected as IDE Primary Master.13. Well you can verify the other options, but with these changes you will be able to start the VM.Note: Sometime the VM owner may share some instructions, if so follow his instructions.14. Finally Start the Virtual Machine (Click > Start)

  Read the article

• Irma &ndash; I Know (Tab)

  - by alain.duron(at)oracle.com

  [ceci n’est pas un sujet sur Oracle ^^] Apparemment, pas mal de monde cherche cette tab, donc je me suis amusé à la transcrire. Soyez indulgents ! Capo 2 :) E |--0---0---2---2---3---3---5---5--------------------------------0----- B |----0---0---0---0---0---0---5---0-1-----0h1^0-----1^0--4-----4------- G |--------------------------------------0---------0----------4--------- D |--2-------1-------0-----------------2---------2----------4----------- A |--------------------------4-------0--------------------2------------- E |---------------------------------------------------------------------     Em       E'      E"              E"^Em               B7 E |--------|-------|-------|-------|----------|--------|-2---2-|-2-222-- B |--0--0--|-0-000-|-0-000-|-0-000-|-0---0----|-0-000--|-4---4-|-4-444-- G |--0--0--|-0-000-|-0-000-|-0-000-|-0---0----|-0-000--|-2---2-|-2-222-- D |--2--2--|-1-111-|-0-000-|-0-000-|-0^2-2----|-2-222--|-2^4-4-|-4-444-- A |--2--2--|-2-222-|-2-222-|-2-222-|-2-2-2----|-2-222--|-2---2-|-2-222-- E |--------|-------|-------|-------|----------|--------|-2---2-|-2-222--      Em      B7      C                       B7 E |--------|-2---2-|-0---0-|-0-000-|-0-000-|-2---2-- B |--0---0-|-4---4-|-1---1-|-1-111-|-1-111-|-4---4-- G |--0---0-|-2---2-|-0---0-|-0-000-|-0-000-|-2---2-- D |--2---2-|-4---4-|-2---2-|-0^222-|-0^222-|-4---4-- A |--2---2-|-2---2-|-3---3-|-3-333-|-3-333-|-2---2-- E |--------|-2---2-|-------|-------|-------|-2---2--      Em      B7      C               G'                 C             B7 E |--------|-2---2-|-0---0-|-0-000-|-0---0-|-0-000-|-0---0-|-0-000--|-2---2-|-2-222-- B |--0--0--|-4---4-|-1---1-|-1-111-|-1---1-|-1-111-|-1---1-|-1-111--|-4---4-|-4-444-- G |--0--0--|-2---2-|-0---0-|-0-000-|-0---0-|-0-000-|-0---0-|-0-000--|-2---2-|-2-222-- D |--2--2--|-4---4-|-2---2-|-0^222-|-0---0-|-0-000-|-2---2-|-0^222--|-2^4-4-|-4-444-- A |--2--2--|-2---2-|-3---3-|-3-333-|-2---2-|-2-222-|-3---3-|-2-222--|-2---2-|-2-222-- E |--------|-2---2-|-------|-------|-3---3-|-3-333-|-------|--------|-2---2-|-2-222--

  Read the article

• [ADF tip #1] Working around some clientListener limitation

  - by julien.schneider(at)oracle.com

  As i occasionally work on Oracle ADF, i've decided to write tips on this Framework. Previous version of adf (10g) had a <afh:body> component to represent the body of your page which allowed to specify javascript events like onload or onunload. In ADF RC, the body (as well as html and head) is geneated by a single <af:document>. To implement the onXXXXX events you embed an <af:clientListener> within this <af:document> and specify property type="load" with the method to trigger.   Problem is that onunload property is not supported by th af:clientListener. So how do i do ? Well, a solution is to add this event during page load.   First step : Embed in your <af:document> the following : <af:clientListener type="load" method="addOnUnload()"/>   Second step : Add your unload event using this kind of script : <af:document>     <f:facet name="metaContainer">     <f:verbatim>     <script type="text/javascript">                 function addOnUnload(evt) {                       window.onunload=function()                               {                                   alert('Goodbye Word');                              }                    }     </script>     </f:verbatim>   When closing browser your event will be triggered as expected.    

  Read the article

• MegaCli newly created disk doesn't appear under /dev/sdX

  - by Henry-Nicolas Tourneur

  After having successfully added 2 new disks in a new RAID virtual drive (background initialization done), I would have exepected it to appear under /dev/sdh but it's not there (so, unusable). The system is running a CentOS 5.2 64 bits, HAL and udev daemons are running, not records of any sdh apparition under the messsage log file or in dmesg, only MegaCli do see that virtual drive. Any idea ? Some data: [root@server ~]# ./MegaCli -LDInfo -LALL -a0 Adapter 0 -- Virtual Drive Information: Virtual Disk: 0 (target id: 0) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:139392MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Virtual Disk: 1 (target id: 1) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:285568MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default [root@server ~]# ls -l /dev/disk/by-id/scsi-360* lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09 -> ../../sda lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part2 -> ../../sda2 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee -> ../../sdf lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee-part1 -> ../../sdf1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f -> ../../sdb lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec -> ../../sde lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec-part1 -> ../../sde1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d -> ../../sdd lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d-part1 -> ../../sdd1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7 -> ../../sdc lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7-part1 -> ../../sdc1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1 -> ../../sdg lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1-part1 -> ../../sdg1

  Read the article

• My Doors - Why Standards Matter to Business

  - by [email protected]

  By Brian Dayton on April 8, 2010 9:27 PM "Standards save money." "Standards accelerate projects." "Standards make better solutions." What do these statements mean to you? You buy technology solutions like Oracle Applications but you're a business person--trying to close the quarter, get performance reviews processed, negotiate a new sourcing contract, etc. When "standards" come up in presentations and discussions do you: - Nod your head politely - Tune out and check your smart phone - Turn to your IT counterpart and say "Bob's all over this standards thing, right Bob?" Here's why standards matter. My wife wants new external doors downstairs, ones that would get more light into the rooms. Am I OK with that? "Uhh, sure...it's a little dark in the kitchen." - 24 hours ago - wife calls to tell me that she's going to the hardware store and may look at doors - 20 hours ago - wife pulls into driveway, informs me that two doors are in the back of her station wagon, ready for me to carry - 19 hours ago - I re-discovered the fact that it's not fun to carry a solid wood door by myself - 5 hours ago - Local handyman, who was at our house anyway, tells me that the doors we bought will likely cost 2-3x the material cost in installation time and labor...the doors are standard but our doorways aren't We could have done more research. I could be more handy. Sure. But the fact is, my 1951 house wasn't built with me in mind. They built what worked and called it a day. The same holds true with a lot of business applications. They were designed and architected for one-time use with one use-case in mind. Today's business climate is different. If you're going to use your processes and technology to differentiate your business you should have at least a working knowledge of: - How standards can benefit your business - Your IT organization's philosophy around standards - Your vendor's track-record around standards...and watch for those who pay lip-service to standards but don't follow through The rallying cry in most IT organizations today is "learn more about the business, drop the acronyms." I'm not advocating that you go out and learn how to code in Java. But I do believe it will help your business and your decision-making process if you meet IT ½...even ¼ of the way there. Epilogue: The door project has been put on hold and yours truly has to return the doors to the hardware store tomorrow.

  Read the article

• Sortie de VirtualBox 3.1.6, une mise à jour mineure qui montre l'implication d'Oracle dans la soluti

  Mise à jour du 30/03/10 Mise à jour mineure pour VirtualBox La version 3.1.6 montre cependant l'implication d'Oracle dans la solution de virtualisation de Sun VirtualBox 3.1.6 vient de sortir. Rien de bien nouveau au programme si ce n'est une stabilité légèrement améliorée et la correction de plusieurs bugs. La virtualisation des distributions Linux a également été au centre des efforts des équipes de développement. Bref, il s'agit d'une mise à jour mineure. Mais qui envoie un message majeure. La solution de virtualisation de Sun continue de bénéficier du support du nouveau propriétaire de la soc...

  Read the article

• WebLogic Silent Install 11.1.1.4 (WLS 10.3.4)

  - by john.graves(at)oracle.com

  This is just a quick note to remind myself of how incredibly easy it is to install the base products without the aid of a mouse! Note to Windoze users: Why?!?!  I’m only showing Linux examples in this blog so I encourage you to just say NO to win-no-z  install.sh !/bin/bash ./wls1034_oepe111161_linux32.bin -mode=silent -silent_xml=./silent.xml silent.xml <?xml version="1.0" encoding="UTF-8"?> <bea-installer> <input-fields> <data-value name="BEAHOME" value="/opt/app/wls10.3.4" /> <data-value name="WLS_INSTALL_DIR" value="/opt/app/wls10.3.4/wlserver_10.3" /> </input-fields> </bea-installer> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Note about Oracle_Home: Since all products are moving to a common WLS base, I simply use the WLS version as my Oracle Home.  In this case wls10.3.4.  Also, I keep my user_projects outside my Oracle_Home directory to keep things clean.  I typically use /opt/app/user_projects or a variation of that.

  Read the article

• Linux service --status-all shows "Firewall is stopped." what service does firewall refer to?

  - by codewaggle

  I have a development server with the lamp stack running CentOS: [Prompt]# cat /etc/redhat-release CentOS release 5.8 (Final) [Prompt]# cat /proc/version Linux version 2.6.18-308.16.1.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)) #1 SMP Tue Oct 2 22:50:05 EDT 2012 [Prompt]# yum info iptables Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.anl.gov * extras: centos.mirrors.tds.net * rpmfusion-free-updates: mirror.us.leaseweb.net * rpmfusion-nonfree-updates: mirror.us.leaseweb.net * updates: mirror.steadfast.net Installed Packages Name : iptables Arch : x86_64 Version : 1.3.5 Release : 9.1.el5 Size : 661 k Repo : installed .... Snip.... When I run: service --status-all Part of the output looks like this: .... Snip.... httpd (pid xxxxx) is running... Firewall is stopped. Table: filter Chain INPUT (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) num target prot opt source destination Chain RH-Firewall-1-INPUT (2 references) ....Snip.... iptables has been loaded to the kernel and is active as represented by the rules being displayed. Checking just the iptables returns the rules just like status all does: [Prompt]# service iptables status Table: filter Chain INPUT (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) num target prot opt source destination Chain RH-Firewall-1-INPUT (2 references) .... Snip.... Starting or restarting iptables indicates that the iptables have been loaded to the kernel successfully: [Prompt]# service iptables restart Flushing firewall rules: [ OK ] Setting chains to policy ACCEPT: filter [ OK ] Unloading iptables modules: [ OK ] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_n[ OK ] [Prompt]# service iptables start Flushing firewall rules: [ OK ] Setting chains to policy ACCEPT: filter [ OK ] Unloading iptables modules: [ OK ] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_n[ OK ] I've googled "Firewall is stopped." and read a number of iptables guides as well as the RHEL documentation, but no luck. As far as I can tell, there isn't a "Firewall" service, so what is the line "Firewall is stopped." referring to?

  Read the article

• La mise à jour Java 7u10 sort, Oracle ajoute des options pour bloquer ou appliquer des restrictions aux applications Web

  La mise à jour Java 7u10 sort Oracle ajoute des options pour bloquer ou appliquer des restrictions aux applications Web Java a été ces derniers mois pointé du doigt à plusieurs reprises par des experts en sécurité pour ses failles. Ces vulnérabilités de la plateforme de développement pouvaient être exploitées via des programmes s'exécutant dans les navigateurs. La mise à jour Java 7 Update 10 (Java 7u10), bien que n'apportant pas des correctifs de sécurité, dispose des fonctionnalités assez intéressantes qui permettront de réduire les risques d'attaques via des navigateurs, en ayant un meilleur contrôle sur le contenu Web. L'outil permet désormais de désactiver n'imp...

  Read the article

• Oracle s'associe à Nokia pour utiliser ses cartes dans ses applications d'entreprise, bonne nouvelle pour le Finlandais

  Oracle s'associe à Nokia pour utiliser ses cartes Dans ses applications d'entreprise, bonne nouvelle pour le Finlandais A mesure que la mobilité monte en puissance, les services de cartographie deviennent de plus en plus stratégique. En témoigne le récent abandon des Googles Maps par Apple dans iOS. Apple qui ne pouvait pas longtemps dépendre d'un concurrent dans ce domaine. Mais ce mouvement ne concerne pas que le grand public. Loin de là. Les CRM par exemple, sont de plus en plus portés sur tablette et les outils de BI prennent de plus en plus en compte des problématiques géospatiales (implantation de maga...

  Read the article

• org.hibernate.MappingException: No Dialect mapping for JDBC type: 2002

  - by Moli

  Hi at all, I'm having a issue trying to get working a JPA nativeQuery. I'm having a org.hibernate.MappingException: No Dialect mapping for JDBC type: 2002 when a try to do a nativeQuery and get a geometry field type. I use oracle and org.hibernatespatial.oracle.OracleSpatial10gDialect. The geom fields is mapped as: @Column(name="geometry") @Type(type = "org.hibernatespatial.GeometryUserType") private Geometry geometry; List<Object> listFeatures= new LinkedList<Object>(); Query query= entityManager.createNativeQuery( "SELECT "+ slots +" , geometry FROM edtem_features feature, edtem_dades dada WHERE" + " feature."+ tematic.getIdGeomField() +" = dada."+ tematic.getIdDataField()+ " AND dada.capesid= "+ tematic.getCapa().getId() + " AND feature.geometriesid= "+ tematic.getGeometria().getId()); listFeatures.addAll( query.getResultList()); Anybody knows a solution? or how to force the type of the geometry to get wroking this... MANY Thanks in advance. Moli

  Read the article

• Base 36 to Base 10 conversion using SQL only.

  - by EvilTeach

  A situation has arisen where I need to perform a base 36 to base 10 conversion, in the context of a SQL statement. There doesn't appear to be anything built into Oracle 9, or Oracle 10 to address this sort of thing. My Google-Fu, and AskTom suggest creating a pl/sql function to deal with the task. That is not an option for me at this point. I am looking for suggestions on an approach to take that might help me solve this issue. To put this into a visual form... WITH Base36Values AS ( SELECT '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ' myBase36 FROM DUAL ), TestValues AS ( SELECT '01Z' BASE36_VALUE, 71 BASE10_VALUE FROM DUAL ) SELECT * FROM Base36Values, TestValues I am looking for something to calculate the value 71, based on the input 01Z. As a bribe, each useful answer gets a free upvote. Thanks Evil.

  Read the article

• ORA-12705 with OracleXE & Windows 7 & GlassFish

  - by bao

  I hate this problem... pls help! I have: GlassFish v3 (build 74.2) Windows 7 Pro english Oracle XE 10.2.0 settings: SQL select * from nls_database_parameters; PARAMETER VALUE NLS_LANGUAGE AMERICAN NLS_TERRITORY AMERICA NLS_CURRENCY $ NLS_ISO_CURRENCY AMERICA NLS_NUMERIC_CHARACTERS ., NLS_CHARACTERSET WE8MSWIN1252 NLS_CALENDAR GREGORIAN NLS_DATE_FORMAT DD-MON-RR NLS_DATE_LANGUAGE AMERICAN NLS_SORT BINARY NLS_TIME_FORMAT HH.MI.SSXFF AM PARAMETER VALUE NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR NLS_DUAL_CURRENCY $ NLS_COMP BINARY NLS_LENGTH_SEMANTICS BYTE NLS_NCHAR_CONV_EXCP FALSE NLS_NCHAR_CHARACTERSET AL16UTF16 NLS_RDBMS_VERSION 10.2.0.1.0 20 rows selected. SQL HOST ECHO %NLS_LANG% AMERICAN_AMERICA.WE8MSWIN1252 NLS_LANG in registry is AMERICAN_AMERICA.WE8MSWIN1252 ORACLE_HOME in registry is C:\oraclexe\app\oracle\product\10.2.0\server I am creating Connection pool in Glassfish admin web GUI, trying to ping.. This error in log: [#|2010-05-15T23:19:26.958+0400|WARNING|glassfishv3.0|javax.enterprise.resource.resourceadapter.com.sun.enterprise.connectors.service|_ThreadID=29;_ThreadName=Thread-1;|RAR8054: Exception while creating an unpooled [test] connection for pool [ phut ], Connection could not be allocated because: ORA-00604: error occurred at recursive SQL level 1 ORA-12705: Cannot access NLS data files or invalid environment specified |#] HOW TO FIX??

  Read the article

• ORA-01019 error only as an administrator

  - by Mike

  I'm having a strange problem. I've installed the Oracle 10g client on a terminal server running Windows Server 2008R2. When I try to connect to Oracle, using, say, Toad, I receive the error "ORA-01019 unable to allocate memory in the user side". But this only happens if I'm logged in as an administrator. If I connect as a normal user, I can connect without issue. Also -- if a normal user is connected, I can then connect without a problem as an administrator. Any thoughts?

  Read the article

• How to use Microsoft.Web.Administration.dll to get the site information the page is running on?

  - by Keith Barrows

  I have a half dozen sites on my server and I would like to get some info from IIS7 to display in the footer of each page (as long as you are an admin of course). I am going through the ServerObject and found Sites but am not finding anything obvious for "this site". What should I do to get at the information for the exact site in IIS7 that the page is running on? For a quick 'hack' style approach I wrote this on my default.aspx page code behind: ServerManager serverMgr = new ServerManager(); foreach (Site site in serverMgr.Sites) { string s = info.Text + site.Name + @"<br/>"; info.Text = s; foreach (Binding binding in site.Bindings) { string t = info.Text + binding.BindingInformation + " | "; string p = t + binding.Protocol + @"<br/>"; info.Text = p; } } TIA

  Read the article

• Injection with google guice does not work anymore after obfuscation with proguard

  - by sme

  Has anyone ever tried to combine the use of google guice with obfuscation (in particular proguard)? The obfuscated version of my code does not work with google guice as guice complains about missing type parameters. This information seems to be erased by the transformation step that proguard does, even when the relevant classes are excluded from the obfuscation. The stack trace looks like this: com.google.inject.CreationException: Guice creation errors: 1) Cannot inject a Provider that has no type parameter while locating com.google.inject.Provider for parameter 0 at de.repower.lvs.client.admin.user.administration.AdminUserCommonPanel.setPasswordPanelProvider(SourceFile:499) at de.repower.lvs.client.admin.user.administration.AdminUserCommonPanel.setPasswordPanelProvider(SourceFile:499) while locating de.repower.lvs.client.admin.user.administration.AdminUserCommonPanel for parameter 0 at de.repower.lvs.client.admin.user.administration.b.k.setParentPanel(SourceFile:65) at de.repower.lvs.client.admin.user.administration.b.k.setParentPanel(SourceFile:65) at de.repower.lvs.client.admin.user.administration.o.a(SourceFile:38) 2) Cannot inject a Provider that has no type parameter while locating com.google.inject.Provider for parameter 0 at de.repower.lvs.client.admin.user.administration.AdminUserCommonPanel.setWindTurbineAccessGroupProvider(SourceFile:509) at de.repower.lvs.client.admin.user.administration.AdminUserCommonPanel.setWindTurbineAccessGroupProvider(SourceFile:509) while locating de.repower.lvs.client.admin.user.administration.AdminUserCommonPanel for parameter 0 at de.repower.lvs.client.admin.user.administration.b.k.setParentPanel(SourceFile:65) at de.repower.lvs.client.admin.user.administration.b.k.setParentPanel(SourceFile:65) at de.repower.lvs.client.admin.user.administration.o.a(SourceFile:38) 2 errors at com.google.inject.internal.Errors.throwCreationExceptionIfErrorsExist(Errors.java:354) at com.google.inject.InjectorBuilder.initializeStatically(InjectorBuilder.java:152) at com.google.inject.InjectorBuilder.build(InjectorBuilder.java:105) at com.google.inject.Guice.createInjector(Guice.java:92) at com.google.inject.Guice.createInjector(Guice.java:69) at com.google.inject.Guice.createInjector(Guice.java:59) I tried to create a small example (without using guice) that seems to reproduce the problem: package de.repower.common; import java.lang.reflect.Method; import java.lang.reflect.ParameterizedType; import java.lang.reflect.Type; class SomeClass<S> { } public class ParameterizedTypeTest { public void someMethod(SomeClass<Integer> param) { System.out.println("value: " + param); System.setProperty("my.dummmy.property", "hallo"); } private static void checkParameterizedMethod(ParameterizedTypeTest testObject) { System.out.println("checking parameterized method ..."); Method[] methods = testObject.getClass().getMethods(); for (Method method : methods) { if (method.getName().equals("someMethod")) { System.out.println("Found method " + method.getName()); Type[] types = method.getGenericParameterTypes(); Type parameterType = types[0]; if (parameterType instanceof ParameterizedType) { Type parameterizedType = ((ParameterizedType) parameterType).getActualTypeArguments()[0]; System.out.println("Parameter: " + parameterizedType); System.out.println("Class: " + ((Class) parameterizedType).getName()); } else { System.out.println("Failed: type ist not instance of ParameterizedType"); } } } } public static void main(String[] args) { System.out.println("Starting ..."); try { ParameterizedTypeTest someInstance = new ParameterizedTypeTest(); checkParameterizedMethod(someInstance); } catch (SecurityException e) { e.printStackTrace(); } } } If you run this code unsbfuscated, the output looks like this: Starting ... checking parameterized method ... Found method someMethod Parameter: class java.lang.Integer Class: java.lang.Integer But running the version obfuscated with proguard yields: Starting ... checking parameterized method ... Found method someMethod Failed: type ist not instance of ParameterizedType These are the options I used for obfuscation: -injars classes_eclipse\methodTest.jar -outjars classes_eclipse\methodTestObfuscated.jar -libraryjars 'C:\Program Files\Java\jre6\lib\rt.jar' -dontskipnonpubliclibraryclasses -dontskipnonpubliclibraryclassmembers -dontshrink -printusage classes_eclipse\shrink.txt -dontoptimize -dontpreverify -verbose -keep class **.ParameterizedTypeTest.class { <fields>; <methods>; } -keep class ** { <fields>; <methods>; } # Keep - Applications. Keep all application classes, along with their 'main' # methods. -keepclasseswithmembers public class * { public static void main(java.lang.String[]); } # Also keep - Enumerations. Keep the special static methods that are required in # enumeration classes. -keepclassmembers enum * { public static **[] values(); public static ** valueOf(java.lang.String); } # Also keep - Database drivers. Keep all implementations of java.sql.Driver. -keep class * extends java.sql.Driver # Also keep - Swing UI L&F. Keep all extensions of javax.swing.plaf.ComponentUI, # along with the special 'createUI' method. -keep class * extends javax.swing.plaf.ComponentUI { public static javax.swing.plaf.ComponentUI createUI(javax.swing.JComponent); } # Keep names - Native method names. Keep all native class/method names. -keepclasseswithmembers,allowshrinking class * { native <methods>; } # Keep names - _class method names. Keep all .class method names. This may be # useful for libraries that will be obfuscated again with different obfuscators. -keepclassmembers,allowshrinking class * { java.lang.Class class$(java.lang.String); java.lang.Class class$(java.lang.String,boolean); } Does anyone have an idea of how to solve this (apart from the obvious workaround to put the relevant files into a seperate jar and not obfuscate it)? Best regards, Stefan

  Read the article

< Previous Page | 403 404 405 406 407 408 409 410 411 412 413 414  | Next Page >