Search Results

Search found 22301 results on 893 pages for 'software sources'.

Page 407/893 | < Previous Page | 403 404 405 406 407 408 409 410 411 412 413 414  | Next Page >

  • Difference between “system-on-chip” and “CPU”

    - by Tim
    Very confused, in some websites, they have this line: iPhone 5s CPU: Apple A7 other websites saying that: iPhone 5s System-on-chip: Apple 7 CPU: 1.3 GHz 64bit dual core other sources saying that iPhone 5s System-on-chip: Apple 7 CPU: 1.3 GHz 64bit dual core Apple 7 In Wikipedia, it said: The Apple A7 is a 64-bit system on a chip (SoC) designed by Apple Inc. It first appeared in the iPhone 5S, which was introduced on September 10, 2013. Apple states that it is up to twice as fast and has up to twice the graphics power compared to its predecessor, the Apple A6. While not the first 64-bit ARM CPU, it is the first to ship in a consumer smartphone or tablet computer. There are 2 sentences: The Apple A7 is a 64-bit system on a chip (SoC) and While not the first 64-bit ARM CPU Wikipedia also said “The A7 features an Apple-designed 64-bit 1.3–1.4 GHz ARMv8-A dual-core CPU, called Cyclone”. So System on chip is also CPU? very confused

    Read the article

  • How to set up Windows 7 Professional as a NAS

    - by Enyalius
    I searched and didn't find any answers, so please forgive me if this is a repeat. Anyway, I have an older computer that I'm using as an HTPC, and I was hoping that I could use it as a NAS/multimedia server, as well. My primary uses would include accessing content on my PS3 (same LAN), accessing content from other computers on my home network and (if I can) accessing content from my Android phone over the internet. I have used SubSonic to stream music to my Android phone and other computers before, but I would really like to find a way to do this natively if possible. I know that I can buy external hard disk cases that can plug in the USB port of my router, that I can get a Drobo or other network storage solution, but I would really just rather not spend the money (especially considering that I already have a computer that I should be able to use). Hardware involved: Apple AirPort Extreme base station router (most recent revision) Home Theater Personal Computer: Core 2 Duo @ 2.4GHz, 8GB DDR2 RAM, ~3.5TB hard drive space Sony Playstaiton 3 Thin 120GB HTC Thunderbolt (I have 4G coverage) rooted and running Android 2.2.1 Various Apple laptops Various Windows 7 desktops/laptops Thanks in advance! Note- I have looked at open source NAS software but I would like to preserve the Windows Media Center functionality in Windows 7, so other NAS software is not an option for me currently. .

    Read the article

  • How can I rapidly switch hosts?

    - by EAMann
    I'm in the process of migrating a forum setup from one version of the software on one machine (older shared Windows host) to a new VPS (Windows Server 2008). To install the software, I used my hosts file to temporarily point the domain at the new IP address. To see the old site, I obviously re-edit the hosts file to remove the reference. But this leaves me constantly adding/removing a # from my hosts file just so I can switch back and forth between the two servers. Is there a way to do this more rapidly? I've found a handful of toggling batch scripts, but all they do is automate the addition/removal of the # character ... so there's still a noticeable lag where I have to repeatedly hit F5 to force my system to detect the new settings. Ideally, I could view both servers at the same time on the same machine. Maybe one through a regular browser session and one through some kind of a proxy. Unfortunately, I don't have the first idea how to set that up. Ideas?

    Read the article

  • Can I clone my hard drive to an external and boot from the clone?

    - by willbuntu
    First thing: I am not asking what software I'm supposed to use. I already know the answer: Ghost (proprietary), Clonezilla, and dd (if I'm careful). What I really want to know is if it is possible to (essentially) bit-for-bit clone my entire installation (OS, installed software, activation(s), etc.) to an external USB hard-drive, and then boot off of that (if I need to, I know how to edit BIOS settings and use Plop boot manager), and work with it day-to-day as if there was virtually no difference from using my internal HDD now. Again, I'm not asking how to install Windows to an external (because I know I'd need to do some special workaround), I'm asking if I can clone everything and boot off of it. In case you're wondering why I'm going to this trouble: I'm using a Lenovo Essentials laptop that has an unmodifiable partition table (due to recovery crap), and has all 4 of its partitions spoken for (3 primary, one extended, cannot change the extended). Anyway, my thought is that if I can clone everything and boot off of it when I need to, and just have a Linux distro on the internal HDD, then that could work.

    Read the article

  • Expertise Location [closed]

    - by Alexey Shatygin
    Is there some really working implementations of the expertise location systems exist? It is very hard to find anything about it. What sources to use, what to read, where to look? I've started with reading David W. McDonald's, Mark S. Ackerman's overview "Just talk to me" and now need just something more detailed. For those, who voting this question to be closed for off-topic: it is connected to IT sphere, if you don't know what it is - why ever vote? http://en.wikipedia.org/wiki/Expertise_finding http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.40.4654&rep=rep1&type=pdf

    Read the article

  • switch OFF syn cookies

    - by Nick
    We have several servers they have public IP's, but work together (one is with Load Balancer, orther with Apache Web server, other with MySQL and so on. Most of the ports are fire-walled, so only "local" servers can be connect there. However ALL servers have some ports that must be publicly open. We have SYN Cookies enabled and from time to time we got: possible SYN flooding on port 8080. Sending cookies. Port 8080 is not public. How we can switch OFF SYN Cookies for some ports (e.g. 8080, 3306 etc) or from some sources (e.g. our servers), but in same time SYN Cookies to be switched ON for all other ports, e.g. port 80. We found this similar problem, except our servers are with public IP's: SYN cookies on internal machines

    Read the article

  • What are the typical methods used to scale up/out email storage servers?

    - by nareshov
    Hi, What I've tried: I have two email storage architectures. Old and new. Old: courier-imapds on several (18+) 1TB-storage servers. If one of them show signs of running out of disk space, we migrate a few email accounts to another server. the servers don't have replicas. no backups either. New: dovecot2 on a single huge server with 16TB (SATA) storage and a few SSDs we store fresh mails on the SSDs and run a doveadm purge to move mails older than a day to the SATA disks there is an identical server which has a max-15min-old rsync backup from the primary server higher-ups/management wanted to pack in as much storage as possible per server in order to minimise the cost of SSDs per server the rsync'ing is done because GlusterFS wasn't replicating well under that high small/random-IO. scaling out was expected to be done with provisioning another pair of such huge servers on facing disk-crunch issues like in the old architecture, manual moving of email accounts would be done. Concerns/doubts: I'm not convinced with the synchronously-replicated filesystem idea works well for heavy random/small-IO. GlusterFS isn't working for us yet, I'm not sure if there's another filesystem out there for this use case. The idea was to keep identical pairs and use DNS round-robin for email delivery and IMAP/POP3 access. And if one the servers went down for whatever reasons (planned/unplanned), we'd move the IP to the other server in the pair. In filesystems like Lustre, I get the advantage of a single namespace whereby I do not have to worry about manually migrating accounts around and updating MAILHOME paths and other metadata/data. Questions: What are the typical methods used to scale up/out with the traditional software (courier-imapd / dovecot)? Do traditional software that store on a locally mounted filesystem pose a roadblock to scale out with minimal "problems"? Does one have to re-write (parts of) these to work with an object-storage of some sort - such as OpenStack object storage?

    Read the article

  • How can I use rsync with a FAT file system?

    - by Kim
    I would like to write a simple backup script that saves some data to a FAT drive. Should I reformat the drive and use a better file system or is it possible to use rsync with FAT? If so, what problems might I run into? Would performance be a lot worse? EDIT: This is on linux, didn't even know there was a rsync for windows. The sources are various file systems (it's a mess), and the destination is currently formatted with FAT32. Thank you for your answers, I'll probably go for a reformat, since I'm not completely sure about the file sizes we'll have.

    Read the article

  • How do I setup a proper VPN for my friends to play LAN games AND give them internet access?

    - by Gizmo
    I'm trying to setup a VPN on my local network, but everyone who connects to me DOES have access to my laptop but not to the internet or other devices on the network. How can I properly configure my VPN on windows to work correctly (giving internet + access to all devices on my network to the remote pc)? Or is there software on windows which makes creating a VPN server easier? or maybe a VMWare image linux vpn server? I can't find any of those! My requirement is that my friends don't have to install additional software, they have to be able to connect with default windows stuff. My OS is Windows 8 Standart edition (not pro or enterprise) OEM. Most of my friends have also windows 8, some windows 7. Extra info: My device is DMZ'ed (Demilitarized Zone, [disabled NAT on my device so it's accessible on the WAN]) I can access files, websites and services on other devices on my network, and all devices can access file shares, website and all other services on my device When enabling VPN everything works except the client is unable to get internet access or access to any device on my network, client has only access to my device.

    Read the article

  • How do I connect remotely to SQL Server from Windows client?

    - by humble_coder
    Hi All, Having a bit of an issue connecting to SQL SERVER remotely from Windows. I've verified that all of my settings are correct via SQL SERVER MANAGEMENT STUDIO EXPRESS and SQL SERVER CONFIGURATION MANAGER. I can connect remotely using ODBC drivers from other OSes (e.g. OS X, Linux, etc). However, when I connect with the same credentials from a remote Windows machine using "SQL SERVER" as the driver I am told that the system cannot connect. I've tried creating an ODBC Data Source and I get the same error: Connection failed: SQLState: '01000' SQL Server Error: 14 [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen(InvalidInstance()). Connection failed: SQLState: '08001' SQL Server Error: 14 [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Invalid Connection From the non-windows machines I can use the IP address of the SQL Server just fine. However, on the remote Windows machine, neither IP address nor named instance works. FYI, I can create an ODBC Data Source using the named instance on the machine actually running the SQL Server (but this is, of course, nothing special -- just proof that it isn't completely hosed). One interesting note: If I use SQL STUDIO 2005 from a Windows client machine, I can use the IP address to connect remotely. Still, the whole reason I bring this up is because I need to use a software package I've written to connect to SQL Server remotely from Windows machines as well. Previously the solution was only needed to xfer data from SQL Server into a PostGRES or MySQL database on non-Windows machines (due to DBA preference). However, now they also want to move the data from the legacy software to MySQL even on Windows. Any assistance would be most appreciated. Feel free to provide a full example connection string. Best

    Read the article

  • Restore a database with LDF file only

    - by Martin
    First of all, i know how stupid it is not to have a any backup. I can't help it, but i have to (try) to solve it. I have a transaction log (LDF) file from a SQL Server 2000 database that contains all transactions since the creation of the database. No truncation has been done. The MDF file is gone. Probably because of some disk failure. There is no backup. Not from the original database and not from the transaction log. I have tried to link the transaction log to a new clean database. But (ofcourse) that failed because SQL Server checks the identity of both files. I have read about software that can read the transaction log. ApexSQL seems to do that. I tried to install the trial version but it gives weird errors when trying to start the program. Anyone knows a solution for me? It may contain third party software, but i prefer a clean SQL Server solution.

    Read the article

  • How to back up initial state of external backup drive?

    - by intuited
    I've picked up an HP Simplesave external drive. It comes with some fancy software that is of no use to me because I don't use Windows. Like many current consumer-targeted backup drives, the backup software is actually contained on the drive itself. I'd like to save the drive's initial state so that I can restore it if I decide to sell it. The backup box itself is somewhat customized: in addition to the hard drive device, it presents a CDROM-like device on /dev/sr0. I gather that the purpose of this cdrom device is to bootstrap via Windows autoplay the backup application which lives on the disk itself. I wouldn't suppose any guarantees about how it does this, so it seems important to preserve the exact state of the disk. The drive is formatted with a single 500GB NTFS partition. My initial thought was to use dd to dump the disk (/dev/sdb) itself, but this proved impractical, as the resulting file was not sparse. This seemed to be because the NTFS empty space is not filled with zeroes, but with a repeating series of 16 bytes. I tried gzipping the output of dd. This reduced to the file to a manageable size — the first 18GB was compressed to 81MB, versus 47MB to tarball the contents of the mounted filesystem — but it was very slow on my admittedly somewhat derelict Pentium M processor. The time to do that first 18GB was about 30 minutes. So I've resorted to dumping the disk state and partition data separately. I've dumped the partition state with sfdisk -d /dev/sdb > sfdisk.-d.out I've also created a compressed image of the NTFS partition (the only one on the disk) with ntfsclone --save-image --output - /dev/sdb1 | gzip -c > ntfsclone.img.gz Is there anything else I should do to ensure that I can restore the precise original state of the drive?

    Read the article

  • In Windows 8.1, how can I configure File History to backup *some* of my SkyDrive folders?

    - by Matthew
    I want File History to back up all of the folders in my SkyDrive except for the media folders (Music, Pictures, Videos, Podcasts). My media folders are "available online only", the rest of "available offline". Right now File History does not back up any of the content in my SkyDrive, and I can't seem to find a way to configure which folders it backs up. I found some sources that say if my SkyDrive is available offline, it will be added to File History. But I don't want to make my entire SkyDrive available offline, just the non-media folders.

    Read the article

  • 3dmark score abnormal

    - by Sean
    I just bought a new laptop. It is core i7 3610QM.(Ivy bridge, 4 core plus hyperthreading), 8G ram, nvidia GT 610M 2GB. The OS is Win7 64bit. I ran 3dmark 11, but the score is frustrating. For 1280*720, the score is P730. It is too low right? I searched online, the score should at least above 1000. Am I right? I never use this software before. I know nvidia has optimus, so I made the laptop in high performance state and white-listed the 3dmark program. But there is no help. I am guessing 3dmark is using i7's graphic module. It cannot transform to nvidia. In the running detail of 3dmark, the graphic card cannot be identified(The row remain blank). Can anybody tell me is this the normal case? If not, can I use some other software to test if my nvidia card is working fine? If this nvidia card cannot work, I will return the new laptop asap. Thanks.

    Read the article

  • Nagios and rrd on a old server

    - by Pier
    I have an old server (P4 based) on which nagios (and all the other tools to monitor) is running. In the last few weeks we are seeing a strange behavior. In the /var/spool/pnp4nagios (where temporary files are stored before getting processed by pnp4nagios daemon) we have many files like perfdata.1274949941-PID-18839 and we get an error in npcd.log: [05-27-2010 11:17:46] NPCD: ThreadCounter 0/15 File is perfdata.1274951306-PID-27849 [05-27-2010 11:17:46] NPCD: File 'perfdata.1274951306-PID-27849' is an already in process PNP file. Leaving it untouched. Sometimes some graph are not drawn. The server is pretty loaded (around 5-6 normally) and i suspect that npcd goes in timeout and leave those files behind. What could I do (apart from change the server)? Few infos about the system: centos 5.5 nagios 3.2.1 pnp4nagios 0.6 (from sources) Thanks

    Read the article

  • Terminal Server CPU usage at 100%

    - by Light1c3
    I'm running a terminal server with around 50-60 users,and every so often the server will go from 40% usage to 100%. I took a closer look an it seems every time this happens, a different user or two seem to be caught in a loop and end up using < 30% where the rest of the users only use a maximum of 5%. The company behind the software we use clame it's due to the servers inadequate hardware (It's a VM system running on a dual - quad core setup) which to me sounds like BS! I'm fairly new to this level of IT so if I misspoke I apologize. I have no way to prove it but I believe adding more raw hardware power wont do me any good as this to me seems like a bug in their software, and it will suck up as much ( or little) CPU as it's given. The VM in question has 4 vCPU cores and 12 GB RAM available, and is running Windows Server 2008, 64-bit Thanks in advance for your help! Note: I have the same question posted on SO, but was pointed in this direction so just in case, here is a link to the post http://stackoverflow.com/questions/17276602/termserver-cpu-at-100

    Read the article

  • How to properly set CPU Units for OpenVz VEs

    - by gucki
    According to all the sources I read (openvz wiki, various mailinglists, forums, ..) the values of the cpuunits settings are relative to each other. So when all are equal and the system is busy, all receive the same cpu share. But something still puzzles me with that: why is there a tool "vzcpucheck" which shows "the power of the node/ host": Current CPU utilization: 18000 Power of the node: 880001 Why is there (do I need) an absolute number when all settings are only relative? Shouldn't those two settings result in exactly the same? ve1: 1 ve2: 1 ve3: 1 = 3 ve1: 293334 ve1: 293334 ve1: 293334 = 880001 (power of the node) What's the difference?

    Read the article

  • Hard drive causing BSOD

    - by JoshIrving
    I've come across a problem after building my new PC and installing a clean Windows 7. I originally planed on a RAID 1 or 0 but after further research I decided against it. So I was left with two 1TB Western Digital Black SATA 6Gb/s hard drives. My plan now was to use my second hard drive as a backup (using Windows Backup or 3rd party software). I set both hard drives to AHCI in the BIOS and installed Windows 7. I went through the lengthy process of downloading and installing each driver manually (latest versions), using the motherboard disk for a list of what I need. After a few restarts and before installing any software, I took an image backup onto DVD and the second hard drive. First witnessed the problem during the first scheduled Windows backup. The progress bar froze at about 70% (doc backup done, image backup in progress). It stayed still for 2 hours until it blue screened. Next time the backup froze, I tried shutting down. It logged me out and got stuck at the last step ("Shutting down" and blue spinner) for an hour, until I hard shutdown. I later realised this hasn't got anything to do with the backup. I ended up blue screening on almost every shut down (same place). Turns out, it's because of the second hard drive spinning down or turning off. The computer will now shutdown properly, as long as I remember to read or write to the second drive before executing shutdown. I've now set "Turn off hard disk after: Never" - No problems, so far. Do I have dodgy hard drive(s) or should I investigate the POWER_STATE_DRIVER_FAILURE BSOD - can it be a driver issue? AHCI?

    Read the article

  • FTP Server upload and filesystem questions

    - by Alex
    I'm a photographer who mainly does event photography. A while ago I bought myself a Nikon WT-4 wireless transmitter, a small device which connects via USB to my Nikon D700 DSLR, and then establishes a WiFi connection to an existing WLAN. It can then upload any pictures I take via FTP to an FTP server somewhere in the network. On my laptop I then have a piece of software which will check a given folder on the disk regularly, this software is smart enough to look at the modified file timestamp, if this timestamp is less than 10 seconds ago, it will not attempt to import the folder and skip the file in this iteration of the import scan. The problem I've discovered seems to be inherent to the FTP protocol, as I have the same problem with Windows 7 built in IIS server, as I do with FileZilla FTP server. When the transmitter starts to upload a file, the FTP server will create a small 300-500 KB file with the correct filename on the disk, but then do nothing with the file until it has completely received the file via FTP. So it seems to create this small dummy file, and then buffer the remainder of the FTP upload until it's finished, and then dump the rest of the file into the dummy file making it the correct size. Problem is, these uploads take about 15-30 seconds depending on reception, but since the folder watch tool will already try to import any file older than 10 seconds, it will always try to import the small dummy files which obviously fails as they're not copmlete yet. Is there any way to 'disable' this behaviour? Ideally I would like my file only to show up once it's been completely uploaded. Or perhaps someone knows another FTP server application (it has to run on win7) which does not show this behaviour?

    Read the article

  • How to sort time column by value instead of alphabetically

    - by Turch
    I'm creating a pivot table by connecting to an SSAS tabular model (Data - From Other Sources - From Analysis Services) . The model has a "time" column that I want to sort by. The default (database) sorting is earliest to latest: When I click the triangle next to 'Row Labels' and select "Sort A to Z", I get alphabetically sorted times: How can I get the times to sort by time? Changing the number format from "General" to "Time" does nothing. The times aren't stored as text either - the data type of the column in the SSAS model is Auto (Date)

    Read the article

  • Hard drive causing BSOD

    - by JoshIrving
    I've come across a problem after building my new PC and installing a clean Windows 7. I originally planed on a RAID 1 or 0 but after further research I decided against it. So I was left with two 1TB Western Digital Black SATA 6Gb/s hard drives. My plan now was to use my second hard drive as a backup (using Windows Backup or 3rd party software). I set both hard drives to AHCI in the BIOS and installed Windows 7. I went through the lengthy process of downloading and installing each driver manually (latest versions), using the motherboard disk for a list of what I need. After a few restarts and before installing any software, I took an image backup onto DVD and the second hard drive. First witnessed the problem during the first scheduled Windows backup. The progress bar froze at about 70% (doc backup done, image backup in progress). It stayed still for 2 hours until it blue screened. Next time the backup froze, I tried shutting down. It logged me out and got stuck at the last step ("Shutting down" and blue spinner) for an hour, until I hard shutdown. I later realised this hasn't got anything to do with the backup. I ended up blue screening on almost every shut down (same place). Turns out, it's because of the second hard drive spinning down or turning off. The computer will now shutdown properly, as long as I remember to read or write to the second drive before executing shutdown. I've now set "Turn off hard disk after: Never" - No problems, so far. Do I have dodgy hard drive(s) or should I investigate the POWER_STATE_DRIVER_FAILURE BSOD - can it be a driver issue? AHCI?

    Read the article

  • I can't set the resolution to that recommended by my monitor

    - by F4r-20
    Firstly, I have looked here but didn't find what I needed. I have a Dell Optiplex 380 only using the on-board graphics (believe its the Intel G41 Express Chipset) but I can't seem to get the resolution right. The monitor I'm using (HP LE1901w) wants me to use 1440x900 but the only options I get are: 1600 x 1200 1366 x 768 1360 x 768 1280 x 1024 1280 x 960 1152 x 864 1024 x 768 800 x 600 So it will allow me to go higher or lower but not 1440x900. I've tried getting the driver from various different sources (Dell, Intel, Windows 7 Update) but still can't get that option. Does anybody know what else I can try?

    Read the article

  • How to configure installed Ruby and gems?

    - by NARKOZ
    My current gem env returns: RubyGems Environment: - RUBYGEMS VERSION: 1.3.6 - RUBY VERSION: 1.8.7 (2008-08-11 patchlevel 72) [x86_64-linux] - INSTALLATION DIRECTORY: /home/USERNAME/.gems - RUBYGEMS PREFIX: /home/narkoz - RUBY EXECUTABLE: /usr/bin/ruby1.8 - EXECUTABLE DIRECTORY: /home/USERNAME/.gems/bin - RUBYGEMS PLATFORMS: - ruby - x86_64-linux - GEM PATHS: - /home/USERNAME/.gems - /usr/lib/ruby/gems/1.8 - GEM CONFIGURATION: - :update_sources => true - :verbose => true - :benchmark => false - :backtrace => false - :bulk_threshold => 1000 - "gempath" => ["/home/USERNAME/.gems", "/usr/lib/ruby/gems/1.8"] - "gemhome" => "/home/USERNAME/.gems" - REMOTE SOURCES: - http://rubygems.org/ How can I change path /home/USERNAME/ to my own without uninstalling? OS: Debian Linux

    Read the article

  • Disk fragmentation when dealing with many small files

    - by Zorlack
    On a daily basis we generate about 3.4 Million small jpeg files. We also delete about 3.4 Million 90 day old images. To date, we've dealt with this content by storing the images in a hierarchical manner. The heriarchy is something like this: /Year/Month/Day/Source/ This heirarchy allows us to effectively delete days worth of content across all sources. The files are stored on a Windows 2003 server connected to a 14 disk SATA RAID6. We've started having significant performance issues when writing-to and reading-from the disks. This may be due to the performance of the hardware, but I suspect that disk fragmentation bay be a culprit at well. Some people have recommended storing the data in a database, but I've been hesitant to do this. An other thought was to use some sort of container file, like a VHD or something. Does anyone have any advice for mitigating this kind of fragmentation?

    Read the article

  • How to check the OS is running on bare metal and not in virtualized environment created by BIOS?

    - by Arkadi Shishlov
    Is there any software available as a Linux, *BSD, or Windows program or boot-image to check (or guess with good probability) the environment an operating system is loaded onto is genuine bare metal and not already virtualized? Given recent information from various sources, including supposed to be E.Snowden leaks, I'm curious about the security of my PC-s, even about those that don't have on-board BMC. How it could be possible and why? See for example Blue Pill, and a number of papers. With a little assistance from network card firmware, which is also loadable on popular card models, such hypervisor could easily spy on me resulting in PGP, Tor, etc. exercises futile.

    Read the article

< Previous Page | 403 404 405 406 407 408 409 410 411 412 413 414  | Next Page >