Search Results

Search found 39200 results on 1568 pages for 'zip files'.

Page 407/1568 | < Previous Page | 403 404 405 406 407 408 409 410 411 412 413 414  | Next Page >

  • Set Java Application's virtual machine max memory without access to VM parameters because of custom

    - by Tom
    I'm using a Java application which allows you to import custom files. On import, these files are loaded into memory. The problem is that the files I want to import are very big, this causes an OutOfMemory exception. The crash log also informs me that the VM was started with the java parameter "-Xmx512m", I want to alter this to "-Xmx1024m" so that I got double the memory available. The problem is that this application is using it's own JRE folder and that there's a launcher written in C which is calling the jvm.dll file. In any way, java.exe or javaw.exe are never called and thus I cannot set these parameters myself (if I delete these executables it doesn't matter, can still run the application - this is not the case with the dll). So, my question is, can I set this VM parameter in an other way? I'm even willing to alter the JRE files if there is no other way.

    Read the article

  • How do I relocate assemblies from a deployment project without breaking application references?

    - by James
    Hi, I have recently refactored a lot of my applications existing code and I am now looking at tidying up the deployment side of things. The existing installer application installs everything in the application folder (with the exclusion of a couple of config files which are located in a sub folder). However, I have multiple applications which all use some common assemblies and my goal is to relocate a these particular assemblies to the "Common Files" folder in the program files directory. NB: I have read a lot about the GAC but I have no experience with it and also read a few horror stories, so trying to get a simple solution for the time being. I managed to get the assemblies installed into the Common Files folder, however, as a result (typical I.T.) I have broken my app! If I copy the assemblies back into the application folder it works fine so the problem is obviously to do with how my app is referencing the assemblies. To get the installer to install the assemblies into the Common Files folder I just updated the Folder property of each assembly in the Detected Dependencies list. My thoughts were when I did that the installer would somehow update my application to tell it to look in that folder for them but that doens't appear to be the case. What exactly am I doing wrong here?

    Read the article

  • Image Steganography

    - by Sridhar
    Hi, I'm working on Steganography application. I need to hide a message inside an image file and secure it with a password, with not much difference in the file size. I am using Least Significant Bit algorithm and could do it successfully with BMP files but it does not work with JPEG, PNG or TIFF files. Does this algorithm work with these files at all? Is there a better way to achieve this? Thanks.

    Read the article

  • File IO, Handling CRLF

    - by aCuria
    Hi, i am writing a program that takes a file and splits it up into multiple small files of a user specified size, then join the multiple small files back again. 1) the code must work for c, c++ 2) i am compiling with multiple compilers. I am reading and writing to the files by using the stl functions fread() and fwrite() The problem I am having pertains to CRLF. If the file I am reading from contains CRLF, then I want to retain it when i split and join the files back together. If the file contains LF, then i want to retain LF. Unfortunately, fread() seems to store CRLF as \n (I think), and whatever is written by fwrite() is compiler-dependent. How do i approach this problem? Thanks.

    Read the article

  • Django choking oddly on some static media

    - by Edan Maor
    My situation: I'm serving static media via Django on my dev machine. On some files that I try and load, I get back this error: Traceback: File "c:\Program Files\Python26\Lib\site-packages\django\core\handlers\base.py" in get_response 92. response = callback(request, *callback_args, **callback_kwargs) File "E:\Stack2Blog\src.hg\stack2blog\..\stack2blog\stack2blogapp\views.py" in userpage 71. so_user = site.user(userid) File "E:\Stack2Blog\src.hg\stack2blog\..\stack2blog\stack2blogapp\stackexchange.py" in user 476. u, = self.users((nid,), **kw) File "E:\Stack2Blog\src.hg\stack2blog\..\stack2blog\stack2blogapp\stackexchange.py" in users 481. return self._get(User, ids, 'users', kw) File "E:\Stack2Blog\src.hg\stack2blog\..\stack2blog\stack2blogapp\stackexchange.py" in _get 471. return self.build(root, typ, coll, kw) File "E:\Stack2Blog\src.hg\stack2blog\..\stack2blog\stack2blogapp\stackexchange.py" in build 448. json = self._request(url, kw) File "E:\Stack2Blog\src.hg\stack2blog\..\stack2blog\stack2blogapp\stackexchange.py" in _request 422. dump = json.load(data) File "c:\Program Files\Python26\lib\json\__init__.py" in load 264. return loads(fp.read(), Exception Type: AttributeError at /userpage/362498 Exception Value: 'str' object has no attribute 'read' I've traced it to specific files which don't work (by going to their specific urls). Here's the odd part: changing the filename of the files makes them suddenly work. For example, I had a file called 'post.jpg', which gave this error. I renamed it to 'pos.jpg' and it worked. Back to 'post.jpg' and it gives the same error.

    Read the article

  • Error while building Struts2 Application by Ant

    - by Jeeva
    I'm following Rose India Hello World Tutorial for Struts2 development, I'm Getting, Buildfile: D:\Program Files\Apache Software Foundation\Tomcat 6.0\webapps\struts2tutorial\WEB-INF\src\build.xml clean: [delete] Deleting directory D:\Program Files\Apache Software Foundation\Tomcat 6.0\webapps\struts2tutorial\WEB-INF\classes [mkdir] Created dir: D:\Program Files\Apache Software Foundation\Tomcat 6.0\webapps\struts2tutorial\WEB-INF\classes prepare: BUILD FAILED

    Read the article

  • Windows Azure: Creating a subdirectories inside the blob

    - by veda
    I wanted to create some subdirectories inside my blob. But it is not working out well Here is my code protected void ButUpload_click(object sender, EventArgs e) { // store upladed file as a blob storage if (uplFileUpload.HasFile) { name = uplFileUpload.FileName; // get refernce to the cloud blob container CloudBlobContainer blobContainer = cloudBlobClient.GetContainerReference("documents"); if (textbox.Text != "") { name = textbox.Text + "/" + name; } // set the name for the uploading files string UploadDocName = name; // get the blob reference and set the metadata properties CloudBlockBlob blob = blobContainer.GetBlockBlobReference(UploadDocName); blob.Metadata["FILETYPE"] = "text"; blob.Properties.ContentType = uplFileUpload.PostedFile.ContentType; // upload the blob to the storage blob.UploadFromStream(uplFileUpload.FileContent); } } What I did is that, If I have to create a sub directory, I will enter the name of the sub directory in the textbox. for example, if I need to create a file named "test.txt" inside the sub directory "files" Then, my textbox.text = files and uplFileUpload.FileName = test.txt Now I will concatenate them and upload to the blob.. But it is not working well.. I am getting just https://test.core.windows.net/documents/files/ I am not getting the entire thing I was expecting https://test.core.windows.net/documents/files/test.txt What am I doing wrong... How to create sub directories inside the blob.

    Read the article

  • Spring Integration 1.0 RC2: Streaming file content?

    - by gdm
    I've been trying to find information on this, but due to the immaturity of the Spring Integration framework I haven't had much luck. Here is my desired work flow: New files are placed in an 'Incoming' directory Files are picked up using a file:inbound-channel-adapter The file content is streamed, N lines at a time, to a 'Stage 1' channel, which parses the line into an intermediary (shared) representation. This parsed line is routed to multiple 'Stage 2' channels. Each 'Stage 2' channel does its own processing on the N available lines to convert them to a final representation. This channel must have a queue which ensures no Stage 2 channel is overwhelmed in the event that one channel processes significantly slower than the others. The final representation of the N lines is written to a file. There will be as many output files as there were routing destinations in step 4. *'N' above stands for any reasonable number of lines to read at a time, from [1, whatever I can fit into memory reasonably], but is guaranteed to always be less than the number of lines in the full file. How can I accomplish streaming (steps 3, 4, 5) in Spring Integration? It's fairly easy to do without streaming the files, but my files are large enough that I cannot read the entire file into memory. As a side note, I have a working implementation of this work flow without Spring Integration, but since we're using Spring Integration in other places in our project, I'd like to try it here to see how it performs and how the resulting code compares for length and clarity.

    Read the article

  • c# multi threaded file processing

    - by user177883
    There is a folder that contains 1000 of small text files. I aim to parse and process all of them while more files are being populated in to the folder. My intention is to multithread this operation as the single threaded prototype took 6 minutes to process 1000 files. I like to have reader and writer thread(s) as following : while the reader thread(s) are reading the files, I d like to have writer thread(s) to process them. Once the reader is started reading a file, I d like to mark it as being processed, such as by renaming it, once it s read, rename it to completed. How to approach such multithreaded application ? Is it better to use a distributed hash table or a queue? Which data structure to use that would avoid locks? Would you have a better approach to this scheme that you like to share?

    Read the article

  • Error in Python's os.walk?

    - by Mike Caron
    The os.walk documentation (http://docs.python.org/library/os.html? highlight=os.walk#os.walk), says I can skip traversing unwanted directories by removing them from the dir list. The explicit example from the docs: import os from os.path import join, getsize for root, dirs, files in os.walk('python/Lib/email'): print root, "consumes", print sum(getsize(join(root, name)) for name in files), print "bytes in", len(files), "non-directory files" if 'CVS' in dirs: dirs.remove('CVS') # don't visit CVS directories I see different behavior (using ActivePython 2.6.2). Namely for the code: >>> for root,dirs,files in os.walk(baseline): ... if root.endswith(baseline): ... for d in dirs: ... print "DIR: %s" % d ... if not d.startswith("keep_"): ... print "Removing %s\\%s" % (root,d) ... dirs.remove(d) ... ... print "ROOT: %s" % root ... I get the output: DIR: two Removing: two DIR: thr33 Removing: thr33 DIR: keep_me DIR: keep_me_too DIR: keep_all_of_us ROOT: \\mach\dirs ROOT: \\mach\dirs\ONE ROOT: \\mach\dirs\ONE\FurtherRubbish ROOT: \\mach\dirs\ONE\FurtherRubbish\blah ROOT: \\mach\dirs\ONE\FurtherRubbish\blah\Extracted ROOT: \\mach\dirs\ONE\FurtherRubbish\blah2\Extracted\Stuff_1 ... WTF? Why wasn't \\mach\dirs\ONE removed? It clearly doesn't start with "keep_".

    Read the article

  • Summarize object area with a Hash in Ruby

    - by Arto Uusikangas
    require 'sketchup' entities = Sketchup.active_model.entities summa = Hash.new for face in entities next unless face.kind_of? Sketchup::Face if (face.material) summa[face.material.display_name] += face.area end end Im trying to get the structure in the array as such: summa { "Bricks" = 500, "Planks" = 4000 } Making a ruby script for Google Sketchup btw But if I run this code i only get Error: #+' for nil:NilClass> C:\Program Files (x86)\Google\Google SketchUp 7\Plugins\test.rb:17 C:\Program Files (x86)\Google\Google SketchUp 7\Plugins\test.rb:14:ineach' C:\Program Files (x86)\Google\Google SketchUp 7\Plugins\test.rb:14 C:\Program Files (x86)\Google\Google SketchUp 7\Plugins\test.rb:8:in `call' As im used to using PHP and just doing $array['myownassoc'] += bignumber; But i guess this isnt the right approach when using Ruby? So any help in how i need to go would be nice.

    Read the article

  • Is it okay to truncate a SHA256 hash to 128 bits?

    - by Sunny Hirai
    MD5 and SHA-1 hashes have weaknesses against collision attacks. SHA256 does not but it outputs 256 bits. Can I safely take the first or last 128 bits and use that as the hash? I know it will be weaker (because it has less bits) but otherwise will it work? Basically I want to use this to uniquely identify files in a file system that might one day contain a trillion files. I'm aware of the birthday problem and a 128 bit hash should yield about a 1 in a trillion chance on a trillion files that there would be two different files with the same hash. I can live with those odds. What I can't live with is if somebody could easily, deliberately, insert a new file with the same hash and the same beginning characters of the file. I believe in MD5 and SHA1 this is possible.

    Read the article

  • Google search box

    - by user343282
    I am working on a google box, something like this, http://mytwentyfive.com/blog/wp-content/uploads/byme/Google%20Search%20Appliances.jpg I am pointing the crawler to a folder where there are html files. before the crawler was crawling the files and indexing them but right now it finds the pattern or the folder but not following any html files within the folder. I have tried everything I could and know but, can't think of anything else. Can someone help? thanks

    Read the article

  • How do I recycle code in Visual Studio with XNA?

    - by Marty Wallace
    I'm relatively new to both C# and Visual Studio, using XNA Game Studio. All I want to do is take some folders from a current project which contain .cs files and utilise those files in a new project, but it's proving to be a little trickier than I am used to with Flash/ActionScript. At the moment it seems like I need to use this process over and over until all the files I want are part of the current project:

    Read the article

  • Loading .dll/.exe from file into temporary AppDomain throws Exception

    Hi Gang, I am trying to make a Visual Studio AddIn that removes unused references from the projects in the current solution (I know this can be done, Resharper does it, but my client doesn't want to pay for 300 licences). Anyhoo, I use DTE to loop through the projects, compile their assemblies, then reflect over those assemblies to get their referenced assemblies and cross-examine the .csproj file. Problem: since the .dll/.exe I loaded up with Reflection doesn't unload until the app domian unloads, it is now locked and the projects can't be built again because VS tries to re-create the files (all standard stuff). I have tried creating temporary files, then reflecting over them...no worky, still have locked original files (I totally don’t understand that BTW). Now I am now going down the path of creating a temporary AppDomain to load the files into and then destroy. I am having problems loading the files though: The way I understand AddDomain.Load is that I should create and send a byte array of the assembly to it. I do that: FileStream fs = new FileStream(assemblyFile, FileMode.Open); byte[] assemblyFileBuffer = new byte[(int)fs.Length]; fs.Read(assemblyFileBuffer, 0, assemblyFileBuffer.Length); fs.Close(); AppDomainSetup domainSetup = new AppDomainSetup(); domainSetup.ApplicationBase = assemblyFileInfo.Directory.FullName; AppDomain tempAppDomain = AppDomain.CreateDomain("TempAppDomain", null, domainSetup); Assembly projectAssembly = tempAppDomain.Load(assemblyFileBuffer); The last line throws an exception: "Could not load file or assembly 'WindowsFormsApplication1, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.":"WindowsFormsApplication3, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null"}" Any help or thoughts would be greatly appreciated. My head is lopsided from beating it against the wall... Thanks, Dan

    Read the article

  • Using Tortoise SVN with C++ in Visual Studio 2008

    - by Dr. Monkey
    I have an online repository with some .h and .cpp files that make up part of a project. I'm trying to check these out and use them in a new project, but am getting errors (C4627 and C1010). All the files have been added to the project (with AddExisting Item...), and the subdirectories that contain these files have been added to the "Additional include directories" of the project. Would I be better off having the entire project tree in the repository? My reason for not doing so is that my colleague and I are working on different parts of the code and so want to use different main methods to test things as we go, and I didn't see any need to be passing around any compiled code etc. since I assumed that given the .h and .cpp files (with the correct settings), visual studio would be able to compile the project. What's the best way to make Visual Studio 2008 and TortoiseSVN work well together (without spending any money)?

    Read the article

  • JBoss 6 unpacks jars from WEB-INF/lib of war

    - by Maxym
    when I start JBoss 6 I see that it unpacks all jar files from WEB-INF/lib in tmp/vfs/automountXXX folder. E.g. jackrabbit-server.war contains library asm-3.1.jar, then in tmp folder I see the following folders with files: asm-3.1.jar-83dc35ead0d41d41/asm-3.1.jar asm-3.1.jar-2a48f1c13ec7f25d/contents/"unpacked asm-3.1.jar" it does not take files from my.ear/lib only WEB-INF/lib... Why is it so? And is here any way to prevent it doing so? It just slows down application server starting (and stopping), what is not that comfortable at development... If it is somehow related to JavaEE 6 specification and ejb-jars, which can be located now in WEB-INF/lib, so I don't have such libraries in my war files... UPDATE: actually when I repack jackrabbit-server.war to jackrabbit-server.ear which contains jackrabbit-server.war and moved all its libraries to jackrabbit-server.ear/lib then I still see two folders in tmp: asm-3.1.jar-215a36131ebb088e/asm-3.1.jar asm-3.1.jar-14695f157664f00/contents/ but in this case last folder is empty. So it still creates two folders, but does not unpack my library. Also I use exploded deployment so the question is only about jar files, not unpacking ear/war.

    Read the article

  • Flash upload problems (FileReferenceList, timeouts, #2038 )

    - by binaryLV
    Hello! I'm having problems with timeouts while trying to upload multiple files by using FileReferenceList. upload() is being called in a loop for all selected files on Event.SELECT event of FileReferenceList, but only 2 files are being uploaded simultaneously (I also see 2 opened sockets that are used for uploading by running netstat -aon | find "127.0.0.1:80"). If uploading of any file is not started in 60 seconds, I get a #2038 error. E.g., if I try to upload three large files (like 500MB each), first two uploads are started immediately, third one is not started (because limit is 2 simultaneous uploads) and it fails after 60 seconds with #2038 error (I'm fairly sure that this is because of timeout - tested it). This could be solved by calling upload() only when uploading previous file is completed, but I don't want to "hard-code" the number of possible simultaneous uploads (2 on my PC). Is there any way to get/set this number at runtime?

    Read the article

  • I'd like to know why a function executes fine when called from x but not when called from y

    - by Roland
    When called from archive(), readcont(char *filename) executes fine! Called from runoptions() though, it fails to list the files "archived"! why is this? The program must run in terminal. Use -h as a parameter to view the usage. This program is written to "archive" text files into ".rldzip" files. readcont( char *x) should show the files archived in file (*x) a) Successful call Use the program to archive 3 text files: rldzip.exe a.txt b.txt c.txt FILEXY -a archive() will call readcont and it will work showing the files archived after the binary FILEXY will be created. b) Unsuccessful call After the file is created, use: rldzip.exe FILEXY.rldzip -v You can see that the function crashes! I'd like to know why is this happening! /* Sa se scrie un program care: a) arhiveaza fisiere b) dezarhiveaza fisierele athivate */ #include<stdio.h> #include<stdlib.h> #include<conio.h> #include<string.h> struct content{ char *text; char *flname; }*arc; FILE *f; void readcont(char *x){ FILE *p; if((p = fopen(x, "rb")) == NULL){ perror("Critical error: "); exit(EXIT_FAILURE); } content aux; int i; fread(&i, sizeof(int), 1, p); printf("\nFiles in %s \n\n", x); while(i-- >1 && fread(&aux, sizeof(struct content), 1, p) != 0) printf("%s \n", aux.flname); fclose(p); printf("\n\n"); } void archive(int argc, char **argv){ int i; char inttext[5000], textline[1000]; //Allocate dynamic memory for the content to be archived! arc = (content*)malloc(argc * sizeof(content)); for(i=1; i< argc; i++) { if((f = fopen(argv[i], "r")) == NULL){ printf("%s: ", argv[i]); perror(""); exit(EXIT_FAILURE); } while(!feof(f)){ fgets(textline, 5000, f); strcat(inttext, textline); } arc[i-1].text = (char*)malloc(strlen(inttext) + 1); strcpy(arc[i-1].text, inttext); arc[i-1].flname = (char*)malloc(strlen(argv[i]) + 1); strcpy(arc[i-1].flname, argv[i]); fclose(f); } char *filen; filen=(char*)malloc(strlen(argv[argc])+1+7); strcpy(filen, argv[argc]); strcat(filen, ".rldzip"); f = fopen(filen, "wb"); fwrite(&argc, sizeof(int), 1, f); fwrite(arc, sizeof(content), argc, f); fclose(f); printf("Success! "); for(i=1; i< argc; i++) { (i==argc-1)? printf("and %s ", argv[i]) : printf("%s ", argv[i]); } printf("compressed into %s", filen); readcont(filen); free(filen); } void help(char *v){ printf("\n\n----------------------RLDZIP----------------------\n\nUsage: \n\n Archive n files: \n\n%s $file[1] $file[2] ... $file[n] $output -a\n\nExample:\n%s a.txt b.txt c.txt output -a\n\n\n\nView files:\n\n %s $file.rldzip -v\n\nExample:\n %s fileE.rldzip -v\n\n", v, v, v, v); } void runoptions(int c, char **v){ int i; if(c < 2){ printf("Arguments missing! Use -h for help"); } else{ for(i=0; i<c; i++) if(strcmp(v[i], "-h") == 0){ help(v[0]); exit(2); } for(i=0; i<c; i++) if(strcmp(v[i], "-v") == 0){ if(c != 3){ printf("Arguments misused! Use -h for help"); exit(2); } else { printf("-%s-", v[1]); readcont(v[1]); } } } if(strcmp(v[c-1], "-a") == 0) archive(c-2, v); } main(int argc, char **argv) { runoptions(argc, argv); }

    Read the article

  • PHP Include Paths

    - by Keiron Lowe
    Hi, I'm new to PHP and I'm having a problem when trying to link my CSS files using include. Basically I need my files to link back to a certain directory no matter how far down the file is. I have tried using <?php include $_SERVER['DOCUMENT_ROOT'] . '/sysprogs/required/header.html'; ?> But header.html contains the links to my css files so the directory it ends up looking for the css files in is http://localhost/SysProgs/software/CSS/style.css instead of where I want it to go to which is http://localhost/SysProgs/required/CSS/style.css I hope that made sense and I hope you can help me

    Read the article

  • Multiple File Selection For Uploading in ASP.NET

    - by IrfanRaza
    Hi Friends, There are several resources available on net to upload multiple files, but using multiple FileUpload controls. What I need to have multiple file selection dialog box so that user can select multiple files at one shot and then all files should be uploaded on one click. Anyone of you have any idea? Thanks in advance.

    Read the article

  • ASP.NET JavaScript File Embeded In DLL With GZIP

    - by Lee Hesselden
    We have several fairly large JavaScript files embedded into a single script resources DLL. This is then consumed by multiple projects by way of a reference and page includes via the ASP.NET script manager. This keeps things nice and neat within our ASP.NET pages and requires very little work to integrate into new projects. The problem is that some of these script files are quite larger (approx 100KB) and take time to download. By running minify on them before embedding this is reduced down a lot (around 70KB) but not enough. What we would like to do is GZIP the files before they are embedded. However, just gzipping the files causes syntax errors as the content is not unzipped. There is a content type "text/javascript" applied in AssemblyInfo when the resource is embedded but we can't find a way to specify content-encoding. Is there any way to make this work without having to write a httpmodule/handler (which would mean changing the config for all consuming projects)?

    Read the article

  • When should I add a file reference to a Delphi project ?

    - by Roland Bengtsson
    Unit files for standard VCL files like Dialogs, StringUtils etc is never referenced in a projects DPR-file. But when should I add a reference to the DPR-file ? Now I have own sourcefiles and source of own components. What about source files for Ravereport, Devexpress, Indy, Gnostice etc ? I want as fast codeinsight as possible, but of course I do not want to add bloat to the DPR-file. I use Delphi 2007 Regards

    Read the article

  • Removing a file from TortoiseHG data source

    - by Hossein Margani
    Hi! I am using TortoiseHG for source code control in Windows, I forgot to edit the ".hgignor" file, and now I have a huge folder ".hg" which I know it's because of DLL and EXE and PDB files which I do not need them. Now changing the ignor file does not remove those files. What should I do for deleting these files completely from my TortoiseHg data source? Thank you.

    Read the article

  • Duplicate Symbol Linker Error (C++ help)

    - by Vash265
    Hi. I'm learning some CSP (constraint satisfaction) theory stuff right now, and am using this library to parse XML files. I'm using Xcode as an IDE. My program compiles fine, but when it goes to link the files, I get a duplicate symbol error with the XMLParser_libxml2.hh file. My files are separated as such: A class header file that includes the XMLParser file above A class implementation file that include the class header file A main file that includes the class header file The duplicate symbol is occurring in main.o and classfile.o, but as far as I can tell, I'm not actually adding that .hh file twice. Full error: ld: duplicate symbol bool CSPXMLParser::UTF8String::to<std::basic_string<char, std::char_traits<char>, std::allocator<char> > >(std::basic_string<char, std::char_traits<char>, std::allocator<char> >&) constin /Users/vash265/CSP/Untitled/build/Untitled.build/Debug/Untitled.build/Objects-normal/x86_64/dStructFill.o and /Users/vash265/CSP/Untitled/build/Untitled.build/Debug/Untitled.build/Objects-normal/x86_64/main.o Copying the implementation of the class into the main file and taking the class implementation file out of the compilation target alleviates the error, but it's a disorganized mess this way, and I'll be adding more classes very soon (and it would be nice to have them in separate files). As I've come to understand it, this is caused by the file (XMLParser_libxml2.hh) having both the class and function definition and implementation in one file (and it seems as though this might have been necessary due to the use of templates in that 'header' file). Any ideas on how to get around sticking all my class files in my main.cpp? (I've tried ifdefs, they don't work).

    Read the article

< Previous Page | 403 404 405 406 407 408 409 410 411 412 413 414  | Next Page >