Search Results

Search found 12397 results on 496 pages for 'maybe'.

Page 409/496 | < Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >

• To what extent should code try to explain fatal exceptions?

  - by Andrzej Doyle

  I suspect that all non-trivial software is likely to experience situations where it hits an external problem it cannot work around and thus needs to fail. This might be due to bad configuration, an external server being down, disk full, etc. In these situations, especially if the software is running in non-interactive mode, I expect that all one can really do is log an error and wait for the admin to read the logs and fix the problem. If someone happens to interact with the software in the meantime, e.g. a request comes in to a server that failed to initialize properly, then perhaps an appropriate hint can be given to check the logs and maybe even the error can be echoed (depending on whether you can tell if they're a technical guy as opposed to a business user). For the moment though let's not think too hard about this part. My question is, to what extent should the software be responsible for trying to explain the meaning of the fatal error? In general, how much competence/knowledge are you allowed to presume on administrators of the software, and how much should you include troubleshooting information and potential resolution steps when logging fatal errors? Of course if there's something that's unique to the runtime context this should definitely be logged; but lets assume your software needs to talk to Active Directory via LDAP and gets back an error "[LDAP: error code 49 - 80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 525, vece]". Is it reasonable to assume that the maintainers will be able to Google the error code and work out what it means, or should the software try to parse the error code and log that this is caused by an incorrect user DN in the LDAP config? I don't know if there is a definitive best-practices answer for this, so I'm keen to hear a variety of views.

  Read the article

• Advice on whether to use native C++ DLL or not: PINVOKE & Marshaling ?

  - by Bob

  What's the best way to do this....? I have some Native C++ code that uses a lot of Win32 calls together with byte buffers (allocated using HeapAlloc). I'd like to extend the code and make a C# GUI...and maybe later use a basic Win32 GUI (for use where there is no .Net and limited MFC support). (A) I could just re-write the code in C# and use multiple PINVOKEs....but even with the PINVOKES in a separate class, the code looks messy with all the marshaling. I'm also re-writing a lot of code. (B) I could create a native C++ DLL and use PINVOKE to marshal in the native data structures. I'm assuming I can include the native C++ DLL/LIB in a project using C#? (C) Create a mixed mode DLL (Native C++ class plus managed ref class). I'm assuming that this would make it easier to use the managed ref class in C#......but is this the case? Will the managed class handle all the marshaling? Can I use this mixed mode DLL on a platform with no .Net (i.e. still access the native C++ unmanaged component) or do I limit myself to .Net only platforms. One thing that bothers me about each of these options is all the marshalling. Is it better to create a managed data structure (array, string etc.) and pass that to the native C++ class, or, the other way around? Any ideas on what would be considered best practice...?

  Read the article

• Problems solving oddly acting labels in ie7.

  - by Qwibble

  Okay so this is sort of a double question so I'll split it into two. First part In modern browsers the main bold labels sit above their corresponding form elements, and align to the left as is expected. However in ie7, they randomly site 10-15px inset. I went through the developer tools and could find nothing to fix it. I've made sure all my margins and padding is reset so I don't really understand =S Here's the page demo - link Maybe some of you ie bug fixing genius's know what the problem is? =D Second part Again with labels, this time the in-line ones resident next to the check boxes and radio buttons. In modern browsers again, the side beside the form elements as expected, but not so in ie7 where they take a new line. I've tried floating, changing margins and everything but to no effect in sitting it in-line with the div.checker or div.radio that is created by the uniform Jquery plugin. Here's the page demo - link Sorry for troubling you with my ie7 problems, I know they arent the most fun to solve. Hopefully someone has the patience to help. Matt

  Read the article

• Problem with Active Record

  - by kshchepelin

  Hello everyone. Lets assume we have a User model. And user can plan some activities. The number of types of activities is about 50. All activities have common properties, such as start_time, end_time, user_id, etc. But each of them has some unique properties. Now we have each activity living in its own table in DB. And thats why we have such terrible sql queries like SELECT * FROM `first_activities_table` WHERE (`first_activity`.`id` IN (17,18)) SELECT * FROM `second_activities_table` WHERE (`second_activity`.`id` = 17) ..... SELECT * FROM `n_activities_table` WHERE (`n_activity`.`id` = 44) About 50 queries. That's terrible. There are different ways to solve this. Choose the activity type with the biggest number of properties, create the table 'Activities' and have STI model. But this way we must name our columns in uncomfortable way and often the record in that table would have some NULL fields. Also STI model, but having columns, common for all of activity types and some blob column with serialized properties. But we have to do some search on activities - there can be a problem. And serialization is quite slow. Please help me dealing with this. Maybe my problem has quite different solution that will fit my needs. Thanks for help.

  Read the article

• My jQuery and PHP give different results on the same thing?

  - by Stefan

  Hey all, Annoying brain numbing problem. I have two functions to check the length of a string (primarily, the js one truncates as well) heres the one in Javascript: $('textarea#itemdescription').keyup(function() { var charLength = $(this).val().length; // Displays count $('span#charCount').css({'color':'#666'}); $('span#charCount').html(255 - charLength); if($(this).val().length >= 240){ $('span#charCount').css({'color':'#FF0000'}); } // Alerts when 250 characters is reached if($(this).val().length >= 255){ $('span#charCount').css({'color':'#FF0000'}); $('span#charCount').html('<strong>0</strong>'); var text = $('textarea#itemdescription').val().substring(0,255) $('textarea#itemdescription').val(text); } }); And here is my PHP to double check: if(strlen($_POST["description"])>255){ echo "Description must be less than ".strlen($_POST["description"])." characters"; exit(); } I'm using jQuery Ajax to post the values from the textarea. However my php validation says the strlen() is longer than my js is essentially saying. So for example if i type a solid string and it says 0 or 3 chars left till 255. I then click save and the php gives me the length as being 261. Any ideas? Is it to do with special characters, bit sizes that js reads differently or misses out? Or is it to do with something else? Maybe its ill today!... :P Thanks, Stefan

  Read the article

• What algorithms compute directions from point A to point B on a map?

  - by A. Rex

  How do map providers (such as Google or Yahoo! Maps) suggest directions? I mean, they probably have real-world data in some form, certainly including distances but also perhaps things like driving speeds, presence of sidewalks, train schedules, etc. But suppose the data were in a simpler format, say a very large directed graph with edge weights reflecting distances. I want to be able to quickly compute directions from one arbitrary point to another. Sometimes these points will be close together (within one city) while sometimes they will be far apart (cross-country). Graph algorithms like Dijkstra's algorithm will not work because the graph is enormous. Luckily, heuristic algorithms like A* will probably work. However, our data is very structured, and perhaps some kind of tiered approach might work? (For example, store precomputed directions between certain "key" points far apart, as well as some local directions. Then directions for two far-away points will involve local directions to a key points, global directions to another key point, and then local directions again.) What algorithms are actually used in practice? PS. This question was motivated by finding quirks in online mapping directions. Contrary to the triangle inequality, sometimes Google Maps thinks that X-Z takes longer and is farther than using an intermediate point as in X-Y-Z. But maybe their walking directions optimize for another parameter, too? PPS. Here's another violation of the triangle inequality that suggests (to me) that they use some kind of tiered approach: X-Z versus X-Y-Z. The former seems to use prominent Boulevard de Sebastopol even though it's slightly out of the way. (Edit: this example doesn't work anymore, but did at the time of the original post. The one above still works as of early November 2009.)

  Read the article

• vectorizing loops in Matlab - performance issues

  - by Gacek

  This question is related to these two: http://stackoverflow.com/questions/2867901/introduction-to-vectorizing-in-matlab-any-good-tutorials http://stackoverflow.com/questions/2561617/filter-that-uses-elements-from-two-arrays-at-the-same-time Basing on the tutorials I read, I was trying to vectorize some procedure that takes really a lot of time. I've rewritten this: function B = bfltGray(A,w,sigma_r) dim = size(A); B = zeros(dim); for i = 1:dim(1) for j = 1:dim(2) % Extract local region. iMin = max(i-w,1); iMax = min(i+w,dim(1)); jMin = max(j-w,1); jMax = min(j+w,dim(2)); I = A(iMin:iMax,jMin:jMax); % Compute Gaussian intensity weights. F = exp(-0.5*(abs(I-A(i,j))/sigma_r).^2); B(i,j) = sum(F(:).*I(:))/sum(F(:)); end end into this: function B = rngVect(A, w, sigma) W = 2*w+1; I = padarray(A, [w,w],'symmetric'); I = im2col(I, [W,W]); H = exp(-0.5*(abs(I-repmat(A(:)', size(I,1),1))/sigma).^2); B = reshape(sum(H.*I,1)./sum(H,1), size(A, 1), []); But this version seems to be as slow as the first one, but in addition it uses a lot of memory and sometimes causes memory problems. I suppose I've made something wrong. Probably some logic mistake regarding vectorizing. Well, in fact I'm not surprised - this method creates really big matrices and probably the computations are proportionally longer. I have also tried to write it using nlfilter (similar to the second solution given by Jonas) but it seems to be hard since I use Matlab 6.5 (R13) (there are no sophisticated function handles available). So once again, I'm asking not for ready solution, but for some ideas that would help me to solve this in reasonable time. Maybe you will point me what I did wrong.

  Read the article

• Using border-radius on ul with only giving a radius to the outer li's

  - by RJD22

  Maybe the answer is really simple. But what I'm trying to do it to make a curved border around the li's. So not only the outside but also the inside: Examples: Right Wrong: Don't mind the differences. What I'm trying to do it to curve the inner border this is the html: <ul> <li>Dashboard</li> <li>Voertuigen</li> <li>Klanten</li> <li>Factures</li> <li>Boetes</li> <li>Onderhoud</li> </ul> Css: ul { list-style: none; -moz-border-radius: 12px; -webkit-border-radius: 12px; width: 140px; border: 10px solid #BEBEBE; } ul li { height: 40px; width: 140px; background: #E5E5E5; }

  Read the article

• Programatically enable/disable menuBar buttons in Flex 4

  - by Hamid

  I have the following XML in my Flex4 (AIR) project that defines the start of my menu interface: <mx:MenuBar x="0" y="0" width="100%" id="myMenuBar" labelField="@label" itemClick="menuChange(event)"> <mx:dataProvider> <s:XMLListCollection> <fx:XMLList xmlns=""> <menu label="File"> <item label="New"/> <item label="Load"/> <item label="Save" enabled="false"/> </menu> <menu label="Help"> <item label="About"/> </menu> </fx:XMLList> </s:XMLListCollection> </mx:dataProvider> </mx:MenuBar> I am trying to find the syntax that will let me set the save button to enabled=true after a file has been loaded by clicking "Load", however I can't figure out the syntax, can someone make a suggestion please. Currently the way that button clicks are detected is by a Switch/Case testing the String result of the MenuEvent event.item.@label. Maybe this isn't the best way?

  Read the article

• Coding Practices which enable the compiler/optimizer to make a faster program.

  - by EvilTeach

  Many years ago, C compilers were not particularly smart. As a workaround K&R invented the register keyword, to hint to the compiler, that maybe it would be a good idea to keep this variable in an internal register. They also made the tertiary operator to help generate better code. As time passed, the compilers matured. They became very smart in that their flow analysis allowing them to make better decisions about what values to hold in registers than you could possibly do. The register keyword became unimportant. FORTRAN can be faster than C for some sorts of operations, due to alias issues. In theory with careful coding, one can get around this restriction to enable the optimizer to generate faster code. What coding practices are available that may enable the compiler/optimizer to generate faster code? Identifying the platform and compiler you use, would be appreciated. Why does the technique seem to work? Sample code is encouraged. Here is a related question [Edit] This question is not about the overall process to profile, and optimize. Assume that the program has been written correctly, compiled with full optimization, tested and put into production. There may be constructs in your code that prohibit the optimizer from doing the best job that it can. What can you do to refactor that will remove these prohibitions, and allow the optimizer to generate even faster code? [Edit] Offset related link

  Read the article

• WiX built-in WixUI Dialog Sets have horizontal lines that are just a little too short (picture inclu

  - by Coder7862396

  I am creating an installer for my program using WiX (Windows Installer XML). I have used the following code to begin using the built-in WixUI Dialog Sets: <Product ...> <UIRef Id="WixUI_FeatureTree" /> </Product> This, however, creates a dialog set with horizontal lines that are just a little bit too short on every dialog as shown here: I understand that I could create my own set of dialogs to use instead by using software such as SharpSetup and WixEdit but I like the dialogs that WiX creates and only want to make a very small change to them. Is my best option to download the WiX source code and try to modify it? Is there a more simple solution? Perhaps I should contact the developers of WiX to list it as a bug? Maybe they like it that way though. I however think it looks out of place and would like to change it. I am using the latest weekly release of WiX 3.5.

  Read the article

• Got Hacked. Want to understand how.

  - by gaoshan88

  Someone has, for the second time, appended a chunk of javascript to a site I help run. This javascript hijacks Google adsense, inserting their own account number, and sticking ads all over. The code is always appended, always in one specific directory (one used by a third party ad program), affects a number of files in a number of directories inside this one ad dir (20 or so) and is inserted at roughly the same overnight time. The adsense account belongs to a Chinese website (located in a town not an hour from where I will be in China next month. Maybe I should go bust heads... kidding, sort of), btw. So, how could they append text to these files? Is it related to the permissions set on the files (ranging from 755 to 644)? To the webserver user (it's on MediaTemple so it should be secure, yes?)? I mean, if you have a file that has permissions set to 777 I still can't just add code to it at will... how might they be doing this?

  Read the article

• Classic ASP application-wide initializations and object caching

  - by slack3r

  In classic ASP (which I am forced to use), I have a few factory functions, that is, functions that return classes. I use JScript. In one include file I use these factory functions to create some classes that are used throughout the application. This include file is included with the #include directive in all pages. These factory functions do some "heavy lifting" and I don't want them to be executed on every page load. So, to make this clear I have something like this: // factory.inc function make_class(arg1, arg2) { function klass() { //... } // ... Some heavy stuff return klass; } // init.inc, included everywhere <!-- #include FILE="factory.inc" --> // ... MyClass1 = make_class(myarg01, myarg02); MyClass2 = make_class(myarg11, myarg12); //... How can I achieve the same effect without calling make_class on every page load? I know that I can't cache the classes in the Application object I can't use the Application_OnStart hook in Global.asa I could probably create a scripting component, but I really don't want to do that So, is there something else I can do? Maybe some way to achieve caching of these classes, which are really objects in JScript. PS: [further clarification] In the above code "heavy stuff" is not so heavy, but I just want to know if there's a way to avoid it being executed all the time. It reads database meta information, builds a table of the primary keys in the database and another table that resolves strings to classes, etc.

  Read the article

• odd nullreference error at foreach when rendering view

  - by giddy

  This error is so weird I Just can't really figure out what is really wrong! In UserController I have public virtual ActionResult Index() { var usersmdl = from u in RepositoryFactory.GetUserRepo().GetAll() select new UserViewModel { ID = u.ID, UserName = u.Username, UserGroupName = u.UserGroupMain.GroupName, BranchName = u.Branch.BranchName, Password = u.Password, Ace = u.ACE, CIF = u.CIF, PF = u.PF }; if (usersmdl != null) { return View(usersmdl.AsEnumerable()); } return View(); } My view is of type @model IEnumerable<UserViewModel> on the top. This is what happens: Where and what exactly IS null!? I create the users from a fake repository with moq. I also wrote unit tests, which pass, to ensure the right amount of mocked users are returned. Maybe someone can point me in the right direction here? Top of the stack trace is : at lambda_method(Closure , User ) at System.Linq.Enumerable.WhereSelectArrayIterator`2.MoveNext() at ASP.Index_cshtml.Execute() Is it something to do with linq here? Tell me If I should include the full stack trace.

  Read the article

• Did I implement clock drift properly?

  - by David Titarenco

  I couldn't find any clock drift RNG code for Windows anywhere so I attempted to implement it myself. I haven't run the numbers through ent or DIEHARD yet, and I'm just wondering if this is even remotely correct... void QueryRDTSC(__int64* tick) { __asm { xor eax, eax cpuid rdtsc mov edi, dword ptr tick mov dword ptr [edi], eax mov dword ptr [edi+4], edx } } __int64 clockDriftRNG() { __int64 CPU_start, CPU_end, OS_start, OS_end; // get CPU ticks -- uses RDTSC on the Processor QueryRDTSC(&CPU_start); Sleep(1); QueryRDTSC(&CPU_end); // get OS ticks -- uses the Motherboard clock QueryPerformanceCounter((LARGE_INTEGER*)&OS_start); Sleep(1); QueryPerformanceCounter((LARGE_INTEGER*)&OS_end); // CPU clock is ~1000x faster than mobo clock // return raw return ((CPU_end - CPU_start)/(OS_end - OS_start)); // or // return a random number from 0 to 9 // return ((CPU_end - CPU_start)/(OS_end - OS_start)%10); } If you're wondering why I Sleep(1), it's because if I don't, OS_end - OS_start returns 0 consistently (because of the bad timer resolution, I presume). Basically, (CPU_end - CPU_start)/(OS_end - OS_start) always returns around 1000 with a slight variation based on the entropy of CPU load, maybe temperature, quartz crystal vibration imperfections, etc. Anyway, the numbers have a pretty decent distribution, but this could be totally wrong. I have no idea.

  Read the article

• Is there a Firebug -vsdoc?

  - by David Murdoch

  If not, does anyone care to write one? I would do it myself...but I don't have time right now...maybe next week (unless someone beats me to it). If you are bored and want to compile the vsdoc: Here is the Firebug API. Here is an example vsdoc (jquery-1.4.1-vsdoc.js). I create the following because I kept typing cosnole instead of console. You can use it as a starting point (ish). console = { /// <summary> /// 1: The javascript console /// </summary> /// <returns type="Object" /> }; console.log = function (object) { /// <summary> /// Write to the console's log /// </summary> /// <returns type="null" /> /// <param name="object" type="Object"> /// Write the object to the console's log /// </param> };

  Read the article

• pdf external streams in Max OS X Preview

  - by olpa

  According to the specification, a part of a PDF document can reside in an external file. An example for an image: 2 0 obj << /Type /XObject /Subtype /Image /Width 117 /Height 117 /BitsPerComponent 8 /Length 0 /ColorSpace /DeviceRGB /FFilter /DCTDecode /F (pinguine.jpg) >> stream endstream endobj I found that this functionality does work in Adobe Acrobat 5.0 for Windows (sample PDF with the image), also I managed to view this file in Adobe Acrobat Reader 8.1.3 for Mac OS X after I found the setting "Allow external content". Unfortunately, it seems that non-Adobe tools ignore the external stream feature. I hope I'm wrong, therefore ask the question: How to enable external streams in Mac OS X? (I think that all the system Mac OS X tools use the same library, therefore say "Mac OS X" instead of "Preview".) Or maybe there could be a programming hook to emulate external streams? My task is: store a big set of images (total ˜300Mb) outside of a small PDF (˜1Mb). At some moment, I want to filter PDF through a quartz filter and get a PDF with the images embedded. Any suggestions are welcome.

  Read the article

• If we make a number every millisecond, how much data would we have in a day?

  - by Roger Travis

  I'm a bit confused here... I'm being offered to get into a project, where would be an array of certain sensors, that would give off reading every millisecond ( yes, 1000 reading in a second ). Reading would be a 3 or 4 digit number, for example like 818 or 1529. This reading need to be stored in a database on a server and accessed remotely. I never worked with such big amounts of data, what do you think, how much in terms of MBs reading from one sensor for a day would be?... 4(digits)x1000x60x60x24 ... = 345600000 bits ... right ? about 42 MB per day... doesn't seem too bad, right? therefor a DB of, say, 1 GB, would hold 23 days of info from 1 sensor, correct? I understand that MySQL & PHP probably would not be able to handle it... what would you suggest, maybe some aps? azure? oracle? ... Thansk!

  Read the article

• Bitwise OR of constants

  - by ryyst

  While reading some documentation here, I came across this: unsigned unitFlags = NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit; NSDateComponents *comps = [gregorian components:unitFlags fromDate:date]; I have no idea how this works. I read up on the bitwise operators in C, but I do not understand how you can fit three (or more!) constants inside one int and later being able to somehow extract them back from the int? Digging further down the documentation, I also found this, which is probably related: typedef enum { kCFCalendarUnitEra = (1 << 1), kCFCalendarUnitYear = (1 << 2), kCFCalendarUnitMonth = (1 << 3), kCFCalendarUnitDay = (1 << 4), kCFCalendarUnitHour = (1 << 5), kCFCalendarUnitMinute = (1 << 6), kCFCalendarUnitSecond = (1 << 7), kCFCalendarUnitWeek = (1 << 8), kCFCalendarUnitWeekday = (1 << 9), kCFCalendarUnitWeekdayOrdinal = (1 << 10), } CFCalendarUnit; How do the (1 << 3) statements / variables work? I'm sorry if this is trivial, but could someone please enlighten me by either explaining or maybe posting a link to a good explanation? Thanks! -- ry

  Read the article

• How do I send a client-event asynchronously to a GtkWidget?

  - by fret

  I'm trying to send and receive a client-event using a GtkWidget on the win32 platform. The sending code looks like this: GtkWidget *Wnd; GdkNativeWindow Hnd = #ifdef WIN32 GDK_WINDOW_HWND(Wnd->window); #else GDK_WINDOW_XWINDOW(Wnd->window); #endif GdkEvent *Event = gdk_event_new(GDK_CLIENT_EVENT); // fill out Event params gdk_event_send_client_message(Event, Hnd); Receiving code looks like this: static gboolean MyClientEvent(GtkWidget *widget, GdkEventClient *ev, MyWnd *Wnd) { // breakpoint here... return TRUE; } GtkWidget *Wnd = gtk_window_new(GTK_WINDOW_TOPLEVEL); g_signal_connect( G_OBJECT(Wnd), "client-event", G_CALLBACK(MyClientEvent), this); gtk_widget_add_events(Wnd, GDK_ALL_EVENTS_MASK); I used Spy++ to see the message getting sent, so I know the sending side is ok. The receiving side however doesn't get the client-event. I was expecting my breakpoint in the callback to trigger... but it doesn't. I'm not even sure if a GtkWindow can receive a client-event... from past experience on X11 I thought it was pretty much the same as any other GtkWidget in that respect. Maybe on the win32 platform it's kinda different. But still I'd like to be able to get this working. I would like this to work with asynchronously, and in a thread-safe fashion, so that I can send events from worker threads up to the GUI thread.

  Read the article

• How to Update with LINQ?

  - by DaveDev

  currently, I'm doing an update similar to as follows, because I can't see a better way of doing it. I've tried suggestions that I've read in blogs but none work, such as http://msdn.microsoft.com/en-us/library/bb425822.aspx and http://weblogs.asp.net/scottgu/archive/2007/05/19/using-linq-to-sql-part-1.aspx Maybe these do work and I'm missing some point. Has anyone else had luck with them? // please note this isn't the actual code. // I've modified it to clarify the point I wanted to make // and also I didn't want to post our code here! public bool UpdateMyStuff(int myId, List<int> funds) { // get MyTypes that correspond to the ID I want to update IQueryable<MyType> myTypes = database.MyTypes.Where(xx => xx.MyType_MyId == myId); // delete them from the database foreach (db.MyType mt in myTypes) { database.MyTypes.DeleteOnSubmit(mt); } database.SubmitChanges(); // create a new row for each item I wanted to update, and insert it foreach (int fund in funds) { database.MyType mt = new database.MyType { MyType_MyId = myId, fund_id = fund }; database.MyTypes.InsertOnSubmit(mt); } // try to commit the insert try { database.SubmitChanges(); return true; } catch (Exception) { return false; throw; } } Unfortunately, there isn't a database.MyTypes.Update() method so I don't know a better way to do it. Can sombody suggest what I could do? Thanks. ..as a side note, why isn't there an Update() method?

  Read the article

• Font advance calculation problem on Blackberry OS 5.0

  - by John

  I am currently working on my own implementation of a tab bar for a BlackBerry app, where each tab bar has a title that is right aligned (i.e. the last character in each should be the same distance from the right hand side of the screen). To work out where to draw the text I am using the following calculation: screen width - advance of title - indent. The font I am using is 'BBAlpha Sans' (height 28). Using BlackBerry OS 4.6 everything seems to be calculated properly and the text is aligned when I move between tabs, however I am finding that when I use OS 5.0 it doesn't calculate the advance properly and as a result the alignment is off by maybe 5 pixels or so. With the default font (also BBAlpha Sans, but height 24 - for OS 5.0 at least) it works fine in both versions.. but I don't necessarily always want to use the default font/size, so any ideas what could be going wrong? Is this a bug in the 5.0 API? Thanks. Code: public class TitleBarBackground extends Background { .. public void draw(Graphics graphics, XYRect rect) { graphics.pushRegion(rect); .. Font titleBarFont = FontFamily.forName("BBAlpha Sans").getFont(Font.PLAIN, 28); ... int textWidth = titleBarFont.getAdvance(title); graphics.drawText(title, rect.width - textWidth - TITLE_OFFSET, textYOffset); graphics.popContext(); } .. }

  Read the article

• Hibernate 3.5.0 causes extreme performance problems

  - by user303396

  I've recently updated from hibernate 3.3.1.GA to hibernate 3.5.0 and I'm having a lot of performance issues. As a test, I added around 8000 entities to my DB (which in turn cause other entities to be saved). These entities are saved in batches of 20 so that the transactions aren't too large for performance reasons. When using hibernate 3.3.1.GA all 8000 entities get saved in about 3 minutes. When using hibernate 3.5.0 it starts out slower than with hibernate 3.3.1. But it gets slower and slower. At around 4,000 entities, it sometimes takes 5 minutes just to save a batch of 20. If I then go to a mysql console and manually type in an insert statement from the mysql general query log, half of them run perfect in 0.00 seconds. And half of them take a long time (maybe 40 seconds) or timeout with "ERROR 1205 (HY000): Lock wait timeout exceeded; try restarting transaction" from MySQL. Has something changed in hibernate's transaction management in version 3.5.0 that I should be aware of? The ONLY thing I changed to experience these unusable performance issues is replace the following hibernate 3.3.1.GA jar files: com.springsource.org.hibernate-3.3.1.GA.jar, com.springsource.org.hibernate.annotations-3.4.0.GA.jar, com.springsource.org.hibernate.annotations.common-3.3.0.ga.jar, com.springsource.javassist-3.3.0.ga.jar with the new hibernate 3.5.0 release hibernate3.jar and javassist-3.9.0.GA.jar. Thanks.

  Read the article

• Database table relationships: Always also relate to specified value (Linq to SQL in .NET Framework)

  - by sinni800

  I really can not describe my question better in the title. If anyone has suggestions: Please tell! I use the Linq to SQL framework in .NET. I ran into something which could be easily solved if the framework supported this, it would be a lot of extra coding otherwise: I have a n to n relation with a helper table in between. Those tables are: Items, places and the connection table which relates items to places and the other way. One item can be found in many places, so can one place have many items. Now of course there will be many items which will be in ALL places. Now there is a problem: Places can always be added. So I need a place-ID which encompasses ALL places, always. Like maybe a place-id "0". If the helper table has a row with the place-id of zero, this should be visible in all places. In SQL this would be a simple "Where [...] or place-id = 0", but how do I do this in Linq relations? Also, for a little side question: How could I manage "all but this place" kind of exclusions?

  Read the article

• Determining polygon intersection and containment

  - by Victor Liu

  I have a set of simple (no holes, no self-intersections) polygons, and I need to check that they don't intersect each other (one can be entirely contained in another; that is okay). I can check this by simply checking the per-vertex inside-ness of one polygon versus other polygons. I also need to determine the containment tree, which is the set of relationships that say which polygon contains any given polygon. Since no polygon can intersect any other, then any contained polygon has a unique container; the "next-bigger" one. In other words, if A contains B contains C, then A is the parent of B, and B is the parent of C, and we don't consider A the parent of C. The question: How do I efficiently determine the containment relationships and check the non-intersection criterion? I ask this as one question because maybe a combined algorithm is more efficient than solving each problem separately. The algorithm should take as input a list of polygons, given by a list of their vertices. It should produce a boolean B indicating if none of the polygons intersect any other polygon, and also if B = true, a list of pairs (P, C) where polygon P is the parent of child C. This is not homework. This is for a hobby project I am working on.

  Read the article

< Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >