Search Results

Search found 46749 results on 1870 pages for 'system preferences'.

Page 409/1870 | < Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >

• Asus A8V overcurrent

  - by user139710

  This is not as much as a question as it is a note to those out there that upgrade their motherboards with better processors and the like. Here's my story. Recently I upgraded my processor. System specifications: • Asus A8V Deluxe • 4GB RAM • ATI Radeon 3870 AGP graphics card (I believe that's it) Anyway, I decided to put a dual core Opteron 180 in this rig, but the problem was that I needed to update the BIOS to V-1017, and not knowing the consequences, I went up to the Asus site and got the newest, the latest and the greatest, 1018.002 thinking that it was the best for this board, however it wasn't. I used the Asus EXFlash, which makes life a lot easier, flashed the BIOS and all of a sudden I start getting this message: USB overcurrent protection, system shutting down in 15 seconds to protect your system. WELL SHIT... This is a new one on me... I read the blogs, all the posts on this thing, and did all that everyone else did to correct the problem, but nothing helped. So i decided to start from square one, went back to Asus and looked at the BIOS download... OMG... IT WAS A BETA. So, I downloaded the update that was suggested 1017< and installed it and wouldn't you know, it took care of the problem, no more USB overcurrent protection, no more crashing. I write this today to let you all know about this, just in case you have an issue such as this. Well there you all go. Fly safe and eat your vegetables.

  Read the article

• Booting Ubuntu 12.04 from external eSATA disk

  - by Lord of Scripts

  This is my system topology: Disk #1 (SATA Internal) C: D: (Windows 7 Ultimate) Disk #2 (SATA Internal) E: (Windows Backup) Disk #3 (eSATA External) H: I: (Other windows data) /dev/sdc3 Linux Swap /dev/sdc4 Extended partition /dev/sdc5 Linux / So, I originally had there Ubuntu 8.1 from years ago but never got to use it. Now I used the Ubuntu 12.04 Live CD to install on that same location (That live CD takes a century to boot on a 6GB Intel i7 system...). The installation went fine, I selected it to install on /dev/sdc5 but it never asked me for any boot stuff, where I wanted to install Grub or whatever it is that it uses nowaways (I come from the LILO days when it always worked :-) So, yet again I can't access my new Linux installation. I have to wait a century to boot the "Live" CD and it allows me to see my new installation but I can't do anything with it. I tried the approach of this blog post. Copied the linux.bin of /dev/sdc5 into C: and used the BCDEdit steps to declare the new OS. So when I boot I see the Windows Boot menu and select Linux and after than I only get a black screen with a blinking cursor on the upper left. I can boot into Windows though. So, perhaps it didn't install the boot code on /dev/sdc5? I used this setup years ago booting from Windows with a BIN file: dd if=/dev/sdc5 of=/mnt/share/C/linux.bin bs=512 count=1 I am very reluctant to run GRUB because years ago I did and it wiped out my Windows boot sector and took quite some effort to recover it and be able to boot Windows again. I have been trying to install GRUB on a blank USB stick but I can't find anything clear enough. My system does NOT have a floppy. So can someone give me some ideas about how to get control of my Ubuntu 12.04 installation?

  Read the article

• SD Card only mounted after a reboot

  - by evothur

  Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• Throwing and catching exceptions in the same function/method

  - by usr

  I've written a function that asks a user for input until user enters a positive integer (a natural number). Somebody said I shouldn't throw and catch exceptions in my function and should let the caller of my function handle them. I wonder what other developers think about this. I'm also probably misusing exceptions in the function. Here's the code in Java: private static int sideInput() { int side = 0; String input; Scanner scanner = new Scanner(System.in); do { System.out.print("Side length: "); input = scanner.nextLine(); try { side = Integer.parseInt(input); if (side <= 0) { // probably a misuse of exceptions throw new NumberFormatException(); } } catch (NumberFormatException numFormExc) { System.out.println("Invalid input. Enter a natural number."); } } while (side <= 0); return side; } I'm interested in two things: Should I let the caller worry about exceptions? The point of the function is that it nags the user until the user enters a natural number. Is the point of the function bad? I'm not talking about UI (user not being able to get out of the loop without proper input), but about looped input with exceptions handled. Would you say the throw statement (in this case) is a misuse of exceptions? I could easily create a flag for checking validity of the number and output the warning message based on that flag. But that would add more lines to the code and I think it's perfectly readable as it is. The thing is I often write a separate input function. If user has to input a number multiple times, I create a separate function for input that handles all formatting exceptions and limitations.

  Read the article

• How can I determine the first visible tile in an isometric perspective?

  - by alekop

  I am trying to render the visible portion of a diamond-shaped isometric map. The "world" coordinate system is a 2D Cartesian system, with the coordinates increasing diagonally (in terms of the view coordinate system) along the axes. The "view" coordinates are simply mouse offsets relative to the upper left corner of the view. My rendering algorithm works by drawing diagonal spans, starting from the upper right corner of the view and moving diagonally to the right and down, advancing to the next row when it reaches the right view edge. When the rendering loop reaches the lower left corner, it stops. There are functions to convert a point from view coordinates to world coordinates and then to map coordinates. Everything works when rendering from tile 0,0, but as the view scrolls around the rendering needs to start from a different tile. I can't figure out how to determine which tile is closest to the upper right corner. At the moment I am simply converting the coordinates of the upper right corner to map coordinates. This works as long as the view origin (upper right corner) is inside the world, but when approaching the edges of the map the starting tile coordinate obviously become invalid. I guess this boils down to asking "how can I find the intersection between the world X axis and the view X axis?"

  Read the article

• JiglibX addition to existing project questions

  - by SomeXnaChump

  Got a very simple existing project, that basically contains a lot of cubes. Now I am wanting to add a physics system to it and JiglibX seemed like the simplest one with some tutorials out there. My main problem is that the physics don't seem to be working how I imagined, I expected my tower of cubes to come crashing down, but they dont seem to do anything. I think my problem is that my cubes do not inherit DrawableGameComponent, they are managed by a world object that will update and render them. So they are at no point put into the games component list. I am not sure if this means that JiglibX will not be able to interact with them as in all the tutorials there are no explicit calls to add the Body objects to the physics system, so I can only presume that they are using a static/singleton under the hood which automatically hooks in all things, or they use the game objects component list somehow. I also noticed that in alot of the tutorials they use the following when setting up the physics system: float timeStep = (float)gameTime.ElapsedGameTime.Ticks / TimeSpan.TicksPerSecond; PhysicsSystem.CurrentPhysicsSystem.Integrate(timeStep); Would it not be better to keep a local instance of the created PhysicsSystem object and just call myPhysicsSystem.Integrate(timeStep)?

  Read the article

• Ubuntu 12.10 won't display properly after kernel upgrade

  - by Daniel

  After updating a system today, Ubuntu's doesn't display correctly. The desktop now looks like this. It was working properly before. I had to use the terminal to run synaptic package manager, so I could view the update history; which is as follows: Commit Log for Wed Nov 7 11:50:36 2012 Upgraded the following packages: linux-image-generic (3.5.0.17.19) to 3.5.0.18.21 Installed the following packages: linux-image-3.5.0-18-generic (3.5.0-18.29) linux-image-extra-3.5.0-18-generic (3.5.0-18.29) Prior to this issue, the last active driver was nvidia-current-updates, version 304.51. I tried using the nvidia-current driver, version 304.51.really.304.43 instead, but the problem persists. I tried running nvidia-settings from terminal, so I could try configuring something, but the application informs that the Nvidia driver is not being used. As the x-swat repository has nothing for Quantal, I desperately used the unstable x-edgers repository & upgraded, but to no avail; so I purged it. The display should normally be full HD, but the only available resolutions now are 1024x768(4:3) and 800x600(4:3). The system is Dell XPS-L702X, with NVIDIA GeForce GT 555M, and 17" screen. How can I fix this problem? Update: I tried using the Nouveau third-party driver & this fixes the issue. However, if you have any idea how to get the Nvidia drivers working properly with the latest kernel, please share; as I've noticed some videos playing very slowly on the system, though I'm not sure exactly why.

  Read the article

• Never Bet Against the Impossible

  - by BuckWoody

  My uncle used to say “If a man tells you that his car squirts milk in his eye when you lift the hood, don’t bet against that. You’ll end up with milk in your eye.” My friend Allen White tells me this is taken from a play (and was said about playing cards), but I think the sentiment holds, even in database work. I mentioned the other day that you should allow the other person to talk and actively listen before you propose a solution. Well, I saw a consultant “bet against the impossible”  the other day – and it bit her. She explained to the person telling her the problem that the situation simply couldn’t exist that way, and he proceeded to show her that it did. She got silent, typed a few things, muttered a little, and then said “well, must be something else.” She just couldn’t admit she was wrong. So don’t go there. If someone explains a problem to you with their database, listen with purpose, and then explore the troubleshooting steps you know to find the problem. But keep your absolutes to yourself. In fact, I have a friend that has recently sent me one of those. He connects to a system with SQL Server Management Studio (SSMS) version 2008 (if I recall correctly) and it shows a certain version number of the target system in the connection tab. Then he connects to it using SSMS 2008 R2 and gets a different number. Now, as far as I know, we didn’t change the connection string information, and that’s provided by the target system, so this is impossible. But I won’t tell him that. Not until I look a little more. :) Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Sub-systems in game engines

  - by Hillel

  So here's the problem- I'm writing my own engine library, and it works fine with stuff like menus and the actual game screen. The thing is, I can't really figure out how to integrate something like an intro or dialogue preceding certain levels into this system. Let's look at another example- say I have a game-specific engine which gets a Level object and runs it. Engine would have its own collision and physics system, all hard coded. Now, what if at some point in a level, I want the player to enter a mini-game with different rules? How do I morph the Engine class to support these sub-systems without having to deal with their code all the time (as in: if(regular game) ... else if(mini game) ...)? And what if I want an intro animation at the start of a level, and I want the player to be able to assume control of his character once the animation ends, do I implement the animation into the Engine class itself? Or maybe I need to run another class, CutScene, and when it ends, it calls Engine and starts the level? What if I want to add a dialogue system, where at the start of each level there's a short dialogue and the player can't control his character, and once it ends, he can? Would I then run the dialogue code inside the Engine code? Maybe these sub-systems should all be scripted? I don't know anything about scripting, is it necessary for this kind of situation? Any help would be appreciated.

  Read the article

• Is this the correct approach to an OOP design structure in php?

  - by Silver89

  I'm converting a procedural based site to an OOP design to allow more easily manageable code in the future and so far have created the following structure: /classes /templates index.php With these classes: ConnectDB Games System User User -Moderator User -Administrator In the index.php file I have code that detects if any $_GET values are posted to determine on which page content to build (it's early so there's only one example and no default): function __autoload($className) { require "classes/".strtolower($className).".class.php"; } $db = new Connect; $db->connect(); $user = new User(); if(isset($_GET['gameId'])) { System::buildGame($gameId); } This then runs the BuildGame function in the system class which looks like the following and then uses gets in the Game Class to return values, such as $game->getTitle() in the template file template/play.php: function buildGame($gameId){ $game = new Game($gameId); $game->setRatio(900, 600); require 'templates/play.php'; } I also have .htaccess so that actual game page url works instead of passing the parameters to index.php Are there any major errors of how I'm setting this up or do I have the general idea of OOP correct?

  Read the article

• How can I install from a 9.04 live USB/DVD?

  - by bstpierre

  I have a 9.04 (Jaunty) ISO burned to a USB stick; it appears to be a "live DVD". When I boot from it, I get a GRUB menu listing: Ubuntu, with Linux 2.6.35-generic (This matches the system currently installed on the HDD?) Ubuntu, with Linux 2.6.35-generic (recovery mode) Memory test Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1) Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda1) Ubuntu 9.04, memtest86+ (on /dev/sda1) When I select Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1), I arrive at the desktop of a 9.04 system. I want to wipe the HDD clean and install 9.04. (Upgrading to something newer is not an option; this version is required by a legacy application.) How can I install from this live USB image? I vaguely remember some incantation that I should be able to use in the booted system, but my google-fu is broken at the moment. I'm comfortable with low-level commands, so if you want to recommend a more hard-core strategy, I'm willing to roll with it without requiring a ton of detail...

  Read the article

• Dual Boot Windows 8 and Ubuntu

  - by Nick

  My laptop has two hard drives, one 320GB HDD and a 30GB SSD. I installed Windows 8 on the HDD and Ubuntu on the SSD. However, after I installed Ubuntu, Windows 8 did not appear on the boot list. I tried boot-repair, but this didn't help.Here is the output of my fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6cd9314a Device Boot Start End Blocks Id System /dev/sda1 * 2048 625139711 312568832 7 HPFS/NTFS/exFAT Disk /dev/sdb: 30.0 GB, 30016659456 bytes 255 heads, 63 sectors/track, 3649 cylinders, total 58626288 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6cd93132 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 207126 102539+ 83 Linux /dev/sdb2 208894 58626047 29208577 5 Extended /dev/sdb5 208896 4112383 1951744 82 Linux swap / Solaris /dev/sdb6 4114432 58626047 27255808 83 Linux Disk /dev/mmcblk0: 3965 MB, 3965190144 bytes 49 heads, 48 sectors/track, 3292 cylinders, total 7744512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009c694 Device Boot Start End Blocks Id System /dev/mmcblk0p1 * 8192 7744511 3868160 b W95 FAT32 I also tried sudo grub-update, but that also did nothing.

  Read the article

• Project Showcase: SaaS Web Apps Hits a Home Run with New SCMS Database

  - by Webgui

  We love seeing projects from start to finish, and we’re happy to share the latest example with you. Who: SaaS Web Apps – they use Software as a Service to create web applications that look and feel like desktop applications. What: SaaS Web Apps needed to build a Sports Contract Management System (SCMS) for one of its customers, Premier Stinson Sports. Why: The SCMS database is used for collecting, analyzing and recording college coach and athletic directors’ employment and contract data. The Challenge: Premier Stinson Sports works with a number of partners, each with its own needs and unique requirements. For example, USA Today uses the system to provide cutting edge news analysis while The National Sports Law Institute of Marquette University Law School uses it to for the latest sports contract data and student analysis. In addition, the system needed to be secure due to the sensitivity of the data; it was essential that the user security and permissions be easily configurable. As always, performance was a key factor, especially with the intense reporting and analytical capabilities for this project. Because of this, most of the processing had to be done on a dedicated server but the project called for the richness and responsiveness of a desktop application. The Solution: To execute the project, SaaS Web Apps used APS.Net-based Visual WebGui from Gizmox, combined with SQL Server 2008 and SQL Reporting Services. This combination resulted in a quick deployment for SaaS Web Apps’ customers. The Result: The completed project gave each partner the scalability and availability of a web application with the performance and security of a desktop application. As an example, USA Today pulls data from this database to give readers the latest sports stats – Salary analysis of 2010 Football Bowl Subdivision Coaches. And here’s a screenshot of the database itself. Great work, SaaS Web Apps!

  Read the article

• How do I daemonify my daemon?

  - by jonobacon

  As part of the Ubuntu Accomplishments system I have a daemon that runs as well as a client that connects to it. The daemon is written in Python (using Twisted) and provides a dbus service and a means of processing requests from the clients. Right now the daemon is just a program I run before I run the client and it sets up the dbus service and provides an API that can be used by the clients. I want to transform this into something that can be installed and run as a system service for the user's session (e.g. starting on boot) and providing a means to start and stop it etc. The problem is, I am not sure what I need to do to properly daemonify it so it can run as this service. I wanted to ask if others can provide some guidance. Some things I need to ask: How can I treat it as a service that is run for the current user service (not a system service right now)? How do I ensure I can start, stop, and restart this session service? When packaging this, how do I ensure that it installs it as a service for the user's session and is started on login etc? In responding, if you can point me to specific examples or solutions I need to implement, that would be helpful. :-) Thanks! Jono

  Read the article

• Should we hire a new developer now, or wait until the code is refactored to make it suitable for a team environment?

  - by w0051977

  I support and develop a large system that uses various technologies e.g. c++,.net,vb6 etc. I am a sole developer. I am debating whether now is the right time to approach my manager (who is not a developer) to ask if another developer can be recruited. I don't have any experience working in software teams. I have always been a sole developer. The concerns I have are: There is still a lot to do. Training another developer would take time and distract me from my duties. The company does not invest heavily in tools e.g. source control The code in this system needs to be refactored to introduce concepts such as interfaces, polymorphism etc, which are supported by methodologies such as Agile (I inherited the system about 12 months ago). I am gradually trying to refactor the code. I believe I have two options: Approach my manager now Wait until I have had time to refactor the code so it is more suitable for a team environment. Which option is best? I am hoping to hear from other developers who have been in my situation.

  Read the article

• Files in /home deleted

  - by long-time user....2006

  In the most specific, unemotional terms: Reinstalled os, using 11.10(1 month after release to skip initial issues that usually crop up). Configured system to my specifications(just ways of organizing config files, etc). Log out Log back in after after an hour or so...to find my home directory obliterated and just a few skeleton files existing. think oh well, try again (this has happened before with an install for reasons I've never been able to pinpoint, usually around install time with some sort of update but its never been a major recurring issue) same thing happens I thought something was awry, so I reinstalled again (another 20 minutes, meh) Set up system, arranged home directory a bit differently thinking maybe I tread on something I shouldn't have. log out, come back --- the same thing. Most of the directories I added were deleted (e.g. .xmonad which links to xmonad.hs in my portable config directory) tl;dr every change I make in my home directory gets deleted. The emotional part: UNACCEPTABLE. I need to configure my system the way I want, not get punched in the face everytime I make a change. I'll willingly fill in details as needed, this was just a start to see if anyone can help, I've found no trace of this issue in a search.

  Read the article

• What is the correct way to implement Auth/ACL in MVC?

  - by WiseStrawberry

  I am looking into making a correctly laid out MVC Auth/ACL system. I think I want the authentication of a user (and the session handling) to be separate from the ACL system. (I don't know why but this seems a good idea from the things I've read.) What does MVC have to do with this question you ask? Because I wish for the application to be well integrated with my ACL. An example of a controller (CodeIgniter): <?php class forums extends MX_Controller { $allowed = array('users', 'admin'); $need_login = true; function __construct() { //example of checking if logged in. if($this->auth->logged_in() && $this->auth->is_admin()) { echo "you're logged in!"; } } public function add_topic() { if($this->auth->allowed('add_topic') { //some add topic things. } else { echo 'not allowed to add topic'; } } } ?> My thoughts $this->auth would be autoloaded in the system. I would like to check the $allowed array against the user currently (not) logged in and react accordingly. Is this a good way of doing things? I haven't seen much literature on MVC integration and Auth. I want to make things as easy as possible.

  Read the article

• How to make the internal subwoofer work on an Asus G73JW?

  - by CodyLoco

  I have an Asus G73JW laptop which has an internal subwoofer built-in. Currently, the system detects the internal speakers as a 2.0 system (or I can change do 4.0 is the only other option). I found a bug report here: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/673051 which discusses the bug and according to them a fix was sent upstream back at the end of 2010. I would have thought this would have made it into 12.04 but I guess not? I tried following the link given at the very bottom to install the latest ALSA drivers, here: https://wiki.ubuntu.com/Audio/InstallingLinuxAlsaDriverModules however I keep running into an error when trying to install: sudo apt-get install linux-alsa-driver-modules-$(uname -r) Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-alsa-driver-modules-3.2.0-24-generic E: Couldn't find any package by regex 'linux-alsa-driver-modules-3.2.0-24-generic' I believe I have added the repository correctly: sudo add-apt-repository ppa:ubuntu-audio-dev/ppa [sudo] password for codyloco: You are about to add the following PPA to your system: This PPA will be used to provide testing versions of packages for supported Ubuntu releases. More info: https://launchpad.net/~ubuntu-audio-dev/+archive/ppa Press [ENTER] to continue or ctrl-c to cancel adding it Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.7apgZoNrqK --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv 4E9F485BF943EF0EABA10B5BD225991A72B194E5 gpg: requesting key 72B194E5 from hkp server keyserver.ubuntu.com gpg: key 72B194E5: public key "Launchpad Ubuntu Audio Dev team PPA" imported gpg: Total number processed: 1 gpg: imported: 1 (RSA: 1) And I also ran an update as well (followed the instructions on the fix above). Any ideas?

  Read the article

• How to maintain a demo version of an application?

  - by O.O

  I need to be able to demo our production application to prospective clients. The way I have it setup today is simple. The demo application is an exact duplicate of the production system, except that the data in the database is obfuscated to protect our current clients' data. This works great because it doesn't require any application changes. Boss dropped a potential BOMBSHELL today and said that the demo system needs to contain a special link and that ONLY shows up on demo. He went on to explain that in the future there may be much bigger differences between the demo and production apps (e.g. an entire area of functionality). What do I do now? Some things I have thought about doing: Maintain a different branch in subversion specific to the demo system Create an installation package that has the changes for demo, then revert and build a production installation package Modularize the application (no idea how) Say: "Screw you! I will not do it!" (LOL) Use some sort of conditional logic in the app to determine if it is a demo or a production app. E.g. (if the URL contains 'demo' then show else hide). If you haven't guessed by now, this is a web application Anyways, I have no experience in this scenario as to which one is better or if none of these are any good. Anyone have an answer, strategy, something!?

  Read the article

• Step by Step: Remove/Sideline Preinstalled Windows 8, Install Ubuntu

  - by user207562

  I want Ubuntu as my primary/only operating system. Computer came with presumptive Pre-Installed Windows 8.(touch screen) Help. New Dell Inspiron 15r. Cannot install Ubuntu 12.04-03 or LTS. I need/request step by step instructions to remove Windows 8 or sideline Windows 8. (ie) BIOS settings I need to know: What to have; What settings; When to apply; Boot manager settings. UEFI. Etc. This should be easy, but I am mired in the Herpes that is Microsoft. I end up having a presumed dual boot that will not access Ubuntu. (ie) Step 1: Turn on computer. Step 2: F# to change ... to ... at Dell prompt... I want to use Ubuntu as my primary operating system or my only operating system.

  Read the article

• Domain model integration using JSON capable DTOs

  - by g-makulik

  I'm a bit confused about architectural choices for the java/web-applications world. The background is I have a system with certain hardware components (that introduce system immanent active behavior) and a configuration database for system meta and HW-components configuration data (these are even usually self contained, since the HW-components persist configuration data anyway). For realization of the configuration/status data exchange protocol with the HW-components we have chosen the Google Protobuf format, which works well for the directly wired communication with these components. Now we want to develop an abstract model (domain model) for those HW-components and I have the feeling that a plain Java class model would fit best for this (c++ implementation seems to have too much implementation/integration overhead with viable language-bridge interfaces). Google Protobuf message definitions could still serve well to describe DTO objects used to interact with a domain model API. But integrating Google Protobuf messages client side for e.g. data binding in the current view doesn't seem to be a good choice. I'm thinking about some extra serialization features, e.g. for JSON based data exchange with the views/controllers. Most lightweight solutions seem to involve a python based presentation layer using JSON based data transfer (I'm at least not sure to be fully informed about this). Is there some lightweight (applicable for a limited ARM Linux platform) framework available, supporting such architecture to realize a web-application?

  Read the article

• Why is the remove function not working for hashmaps? [migrated]

  - by John Marston

  I am working on a simple project that obtains data from an input file, gets what it needs and prints it to a file. I am basically getting word frequency so each key is a string and the value is its frequency in the document. The problem however, is that I need to print out these values to a file in descending order of frequency. After making my hashmap, this is the part of my program that sorts it and writes it to a file. //Hashmap I create Map<String, Integer> map = new ConcurrentHashMap<String, Integer>(); //function to sort hashmap while (map.isEmpty() == false){ for (Entry<String, Integer> entry: map.entrySet()){ if (entry.getValue() > valueMax){ max = entry.getKey(); System.out.println("max: " + max); valueMax = entry.getValue(); System.out.println("value: " + valueMax); } } map.remove(max); out.write(max + "\t" + valueMax + "\n"); System.out.println(max + "\t" + valueMax); } When I run this i get: t 9 t 9 t 9 t 9 t 9 .... so it appears the remove function is not working as it keeps getting the same value. I'm thinking i have an issue with a scope rule or I just don't understand hashmaps very well. If anyone knows of a better way to sort a hashmap and print it, I would welcome a suggestion. thanks

  Read the article

• Grub not loading after Windows 8 Install

  - by RazorXsr

  My system was configured to dual boot Ubuntu 12.04.1 LTS and Windows 7. Today I got my hands on the MSDN release of Windows 8 and I installed it over my Windows 7. Now the computer just boots to Windows 8 directly without loading the GRUB screen. So I followed the steps as suggested in: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows. Running this command: ls -l /dev/disk/by-label/ gives the following output: total 0 lrwxrwxrwx 1 root root 10 Sep 11 07:51 Entertainment -> ../../sda2 lrwxrwxrwx 1 root root 10 Sep 11 02:45 PENDRIVE -> ../../sdb1 Also fdisk -l command gives this as the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1246aa23 Device Boot Start End Blocks Id System /dev/sda1 * 2048 319582199 159790076 7 HPFS/NTFS/exFAT /dev/sda2 319582208 602906623 141662208 7 HPFS/NTFS/exFAT /dev/sda3 602908672 625135615 11113472 83 Linux Disk /dev/sdb: 1939 MB, 1939865600 bytes 64 heads, 63 sectors/track, 939 cylinders, total 3788800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 2248 3788799 1893276 c W95 FAT32 (LBA) So I assume that I have to run this: sudo grub-install /dev/sda3 to get GRUB up and running. But I am getting this error: /usr/sbin/grub-probe: error: cannot find a device for /boot/grub (is /dev mounted?). Can anyone please guide me in the right direction? The current Ubuntu installation is far too customized to my needs to lose it to a boot manager issue! Any help is much appreciated!

  Read the article

• How can I get rid of the motd message "*** /dev/sdb1 will be checked for errors at next reboot ***"? [duplicate]

  - by kmm

  This question already has an answer here: Persistent “disk will be checked…” in the message of the day (motd) even after reboot 3 answers My motd persistently has: *** /dev/sdb1 will be checked for errors at next reboot *** The problem is that I don't have /dev/sdb1 on my system. I only have /dev/sdb2 (mouted as /) and /dev/sda1 which mounts to /media/backup. I delete that line from /etc/motd, but it reappears after reboot. Here's my df output: Filesystem Size Used Avail Use% Mounted on /dev/sdb2 73G 3.7G 66G 6% / udev 490M 4.0K 490M 1% /dev tmpfs 200M 760K 199M 1% /run none 5.0M 0 5.0M 0% /run/lock none 498M 0 498M 0% /run/shm /dev/sda1 1.9T 429G 1.4T 25% /media/backup Update Here is the output of sudo fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dfc2 Device Boot Start End Blocks Id System /dev/sda1 63 3907024064 1953512001 83 Linux Disk /dev/sdb: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00049068 Device Boot Start End Blocks Id System /dev/sdb1 152301568 156301311 1999872 82 Linux swap / Solaris /dev/sdb2 * 2048 152301567 76149760 83 Linux Partition table entries are not in disk order I guess /dev/sdb1 is my swap space.

  Read the article

• Unable to mount location ubuntu 12.10

  - by Rajesh

  I'm new to Ubuntu. I installed Ubuntu 12.10 replacing windows. Now I'm getting Unable to mount location error while opening the drive. $ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=5fa63194-c19e-4117-95c6-679eb6453d3b / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=70f1ec8d-aa45-4de7-a206-747dccd2472b none swap sw 0 0 $ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001f10f Device Boot Start End Blocks Id System /dev/sda1 * 2048 970561535 485279744 83 Linux /dev/sda2 970563582 976771071 3103745 5 Extended /dev/sda5 970563584 976771071 3103744 82 Linux swap / Solaris

  Read the article

< Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >