Search Results

Search found 11009 results on 441 pages for 'third party integration'.

Page 409/441 | < Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >

  • Refactor the following two C++ methods to move out duplicate code

    - by ossandcad
    I have the following two methods that (as you can see) are similar in most of its statements except for one (see below for details) unsigned int CSWX::getLineParameters(const SURFACE & surface, vector<double> & params) { VARIANT varParams; surface->getPlaneParams(varParams); // this is the line of code that is different SafeDoubleArray sdParams(varParams); for( int i = 0 ; i < sdParams.getSize() ; ++i ) { params.push_back(sdParams[i]); } if( params.size() > 0 ) return 0; return 1; } unsigned int CSWX::getPlaneParameters(const CURVE & curve, vector<double> & params) { VARIANT varParams; curve->get_LineParams(varParams); // this is the line of code that is different SafeDoubleArray sdParams(varParams); for( int i = 0 ; i < sdParams.getSize() ; ++i ) { params.push_back(sdParams[i]); } if( params.size() > 0 ) return 0; return 1; } Is there any technique that I can use to move the common lines of code of the two methods out to a separate method, that could be called from the two variations - OR - possibly combine the two methods to a single method? The following are the restrictions: The classes SURFACE and CURVE are from 3rd party libraries and hence unmodifiable. (If it helps they are both derived from IDispatch) There are even more similar classes (e.g. FACE) that could fit into this "template" (not C++ template, just the flow of lines of code) I know the following could (possibly?) be implemented as solutions but am really hoping there is a better solution: I could add a 3rd parameter to the 2 methods - e.g. an enum - that identifies the 1st parameter (e.g. enum::input_type_surface, enum::input_type_curve) I could pass in an IDispatch and try dynamic_cast< and test which cast is NON_NULL and do an if-else to call the right method (e.g. getPlaneParams() vs. get_LineParams()) The following is not a restriction but would be a requirement because of my teammates resistance: Not implement a new class that inherits from SURFACE/CURVE etc. (They would much prefer to solve it using the enum solution I stated above)

    Read the article

  • Google Map only showing Grey Blocks on load - Debug Cert has been obtained

    - by Tom
    I am attempting to follow the Google Map View under the views tutorial for the Android. I have followed step by step but still only see grey blocks when viewed. First: I created a Virtual Device using "Google API's(Google Inc.) Platform 2.2 API Level 8" Second: When creating my project I selected "Google API's Google Inc. Platform 2.2 API Level 8". Third: I obtained the SDK Debug Certificate Fouth: Began Coding. Main.xml <?xml version="1.0" encoding="utf-8"?> <com.google.android.maps.MapView xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/mapview" android:layout_width="fill_parent" android:layout_height="fill_parent" android:clickable="true" android:apiKey="0l4sCTTyRmXTNo7k8DREHvEaLar2UmHGwnhZVHQ" / HelloGoogleMaps.java package com.example.googlemap; import android.app.Activity; import android.os.Bundle; import com.google.android.maps.MapView; import com.google.android.maps.MapActivity; public class HelloGoogleMaps extends MapActivity { @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); } @Override protected boolean isRouteDisplayed() { return false; } } HelloGoogleMaps Manifest: <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.example.googlemap" android:versionCode="1" android:versionName="1.0"> <application android:icon="@drawable/icon" android:label="@string/app_name"> <uses-library android:name="com.google.android.maps" /> <activity android:name=".HelloGoogleMaps" android:label="@string/app_name"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> </application> <uses-permission android:name="android.permission.INTERNET" /> <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION"/> </manifest> Any thoughts?? Thanks!

    Read the article

  • Using PHP5s SOAP Client to send data to an ASP/.NET based SOAP server.

    - by user325143
    I am trying to write a snippet of PHP to connect to a third party's API via SOAP to enter some data into their database. The API requires me to pass several mandatory fields for every call (username, password, companyid, entitytype) in addition to the mandatory data fields. It also requires me to call the "ValidateEntity" funciton before calling the "CreateEntity" function. Documentation can be found here: http://wiki.agemni.com/Getting_Started/APIs/Database_API I have never worked with SOAP before, so I am very new to this. Here is what I have so far: error_reporting(E_ALL); ini_set('display_errors', '1'); $client = new SoapClient("http://agemni.com/AgemniWebservices/service1.asmx?WSDL", array('trace'=> true)); $options = array( 'username' => "myuser", 'password' => "mypassword", 'companyid' => myID, 'entitytype' => 2 ); $params = array( 'fname' => "John", 'lname' => "Doe", 'phone' => "859-333-3333", 'zip' => "40332", 'area id' => "12345", 'lead id' => "28222", 'contactdate' => "4/10/2010" ); $validate = $client->__soapCall("ValidateEntity", array($params), array($options)); $client->__soapCall("CreateEntity", array($params), array($options)); echo "<pre>"; var_dump($client-> __getLastRequestHeaders()); var_dump($client-> __getLastRequest()); var_dump($client-> __getLastResponseHeaders()); var_dump($client-> __getLastResponse()); var_dump($result); echo "</pre>"; Upon executing this code, I get the following error: Fatal error: Uncaught SoapFault exception: [Client] SOAP-ERROR: Encoding: object hasn't 'objecttype' property in /www/tmp/index-soap.php:24 Stack trace: #0 /www/tmp/index-soap.php(24): SoapClient->__soapCall('ValidateEntity', Array) #1 {main} thrown in /www/stealth/tmp/index-soap.php on line 24 I guess my question is.. am I even going about doing this the right way? I know this is a very broad question, but I appreciate any advice you can give me about making this work. Please let me know if you require more detail. Thanks!

    Read the article

  • Populating data in multiple cascading dropdown boxes in Access 2007

    - by miCRoSCoPiC_eaRthLinG
    Hello all, I've been assigned the task to design a temporary customer tracking system in MS Access 2007 (sheeeesh!). The tables and relationships have all been setup successfully. But I'm running into a minor problem while trying to design the data entry form for one table... Here's a bit of explanation first. The screen contains 3 dropdown boxes (apart from other fields). 1st dropdown The first dropdown (cboMarket) represents the Market lets users select between 2 options: Domestic International Since the first dropdown contains only 2 items I didn't bother making a table for it. I added them as pre-defined list items. 2nd dropdown Once the user makes a selection in this one, the second dropdown (cboLeadCategory) loads up a list of Lead Categories, namely, Fairs & Exhibitions, Agents, Press Ads, Online Ads etc. Different sets of lead categories are utilized for the 2 markets. Hence this box is dependent on the 1st one. Structure of the bound table, named Lead_Cateogries for the 2nd combo is: ID Autonumber Lead_Type TEXT <- actually a list that takes up Domestic or International Lead_Category_Name TEXT 3rd dropdown And based on the choice of category in the 2nd one, the third one (cboLeadSource) is supposed to display a pre-defined set of lead sources belonging to the particular category. Table is named Lead_Sources and the structure is: ID Autonumber Lead_Category NUMBER <- related to ID of Lead Categories table Lead_Source TEXT When I make the selection in the 1st dropdown, the AfterUpdate event of the combo is called, which instructs the 2nd dropdown to load contents: Private Sub cboMarket_AfterUpdate() Me![cboLead_Category].Requery End Sub The Row Source of the 2nd combo contains a query: SELECT Lead_Categories.ID, Lead_Categories.Lead_Category_Name FROM Lead_Categories WHERE Lead_Categories.Lead_Type=[cboMarket] ORDER BY Lead_Categories.Lead_Category_Name; The AfterUpdate event of 2nd combo is: Private Sub cboLeadCategory_AfterUpdate() Me![cboLeadSource].Requery End Sub The Row Source of 3rd combo contains: SELECT Leads_Sources.ID, Leads_Sources.Lead_Source FROM Leads_Sources WHERE [Lead_Sources].[Lead_Category]=[Lead_Categories].[ID] ORDER BY Leads_Sources.Lead_Source; Problem When I select Market type from cboMarket, the 2nd combo cboLeadCategory loads up the appropriate Categories without a hitch. But when I select a particular Category from it, instead of the 3rd combo loading the lead source names, a modal dialog is displayed asking me to Enter a Parameter. When I enter anything into this prompt (valid or invalid data), I get yet another prompt: Why is this happening? Why isn't the 3rd box loading the source names as desired. Can any one please shed some light on where I am going wrong? Thanks, m^e

    Read the article

  • PHP, PEAR, and oci8 configuration

    - by zack_falcon
    I'll make this quick. I installed Oracle 11g (with appropriate database, users, etc), Apache 2.4.6, and PHP 5.5.4 on a Fedora 19 system. I wanted to connect PHP to Oracle. What I really wanted to do was to download MDB2_Driver_oci8, which I thought would be easy, but before I can do such a thing, PHP needs to have that plug-in enabled, so here's what I did: Tried to install oci8 via the following: pecl install oci8 When that didn't exactly work the first few times, I figured out I, for some reason, needed "Development tools" - via yum groupinstall "Development Tools" Then I figured out later that PHP actually doesn't do oci8 - it's PHP Devel. So, I had to install that too, via yum install php-devel. And then, I finally got to install oci8. It asked for the Oracle Directory, and that was that. But it said the following: Configuration option 'php_ini' is not set to php.ini location You should add 'extensions=oci8.so' to php.ini First, I did a locate oci8.so - found it in /usr/lib64/php/modules/ Second, I added what it told me to, to the php.ini file. Third, I checked the usual php_info() test page - no mention of OCI8. Uh-oh. Fourth, running both php -i and php -m listed oci8 as one of the modules. Weird. In desperation, I went ahead and downloaded the MDB2_Driver_oci8. Maybe that will fix things. Nope. When I loaded my PHP Webpage, it returned the following: Error message: extension oci8 is not compiled into PHP As well as: MDB2 error: not found Strange. And then I decided to check the error logs: PHP Startup - unable to load dynamic library '/usr/lib64/php/modules/oci8.so' - libclntsh.so.11.1: cannot open shared object file: No such file or directory in Unknown on line 0 And now I'm stuck. I tried going into the php.ini, and found that the extension_dir was commented out. I put it back in, which only seemed to break stuff. Things of note: I followed this (link) guide on how to configure PHP and install oci8. ./configure --with-oci8 doesn't work. Fedora says no such directory. As both the webpage files and the actual server reside on the same PC, I did not install the Oracle Client files. The extension_dir is commented out by default in the php.ini. This is just one of my problems in a long line of problems concerning the replication of an already existing and working, but dying, setup. It seems whenever I want to solve a problem, I have to do X first. And by doing X, I uncover another problem, which I have to solve by doing Y, which has its own problems, etc, etc. Any help would be much appreciated. Thanks.

    Read the article

  • Correct use of a "for...in" loop in javascript?

    - by jnkrois
    Hello everybody, before I ask my question I wanted to let everybody know that I appreciate the fact that there's always somebody out there willing to help, and on my end I'll try to give back to the community as much as I can. Thanks Now, I would like to get some pointers as to how to properly take advantage of the "for...in" loop in JavaScript, I already did some research and tried a couple things but it is still not clear to me how to properly use it. Let's say I have a random number of "select" tags in an HTML form, and I don't require the user to select an option for all of them, they can leave some untouched if they want. However I need to know if they selected none or at least one. The way I'm trying to find out if the user selected any of them is by using the "for...in" loop. For example: var allSelected = $("select option:selected"); var totalSelected = $("select option:selected").length; The first variable produces an array of all the selected options. The second variable tells me how many selected options I have in the form (select tags could be more than one and it changes every time). Now, in order to see if any has been selected I loop through each element (selected option), and retrieve the "value" attribute. The default "option" tag has a value="0", so if any selected option returns a value greater than 0, I know at least one option has been selected, however it does not have to be in order, this is my loop so far: for(var i = 0; i < totalSelected; i++){ var eachOption = $(allSelected[i]).val(); var defaultValue = 0; if(eachOption == defaultValue){ ...redirect to another page }else if(eachOption > defaultValue){ ... I display an alert } } My problem here is that as soon as the "if" matches a 0 value, it sends the user to the next page without testing the rest of the elements in the array, and the user could have selected the second or third options. What I really want to do is check all the elements in the array and then take the next action, in my mind this is how I could do it, but I'm not getting it right: var randomValue = 25; for(randomValue in allSelected){ var found = true; var notFound = false if(found){ display an alert }else{ redirect to next page } } This loop or the logic I'm using are flawed (I'm pretty sure), what I want to do is test all the elements in the array against a single variable and take the next action accordingly. I hope this makes some sense to you guys, any help would be appreciated. Thanks, JC

    Read the article

  • Error reading values from dynamically created table rows in Android

    - by jaymo
    So I have a couple of dynamically created tablerows.Each TableRow has a couple of Textviews.I have a button that on clicked should get all the values of the second and third textviews in each Tablerow in the Table. I have tried to do this using the code below mSubmitOrders.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { if(mTable.getChildCount()>1){ for(int i = 0; i < mTable.getChildCount(); i++){ TableRow tr = (TableRow)mTable.getChildAt(i); TextView code = (TextView) tr.getChildAt(1); TextView quantity = (TextView) tr.getChildAt(2); String Scode = code.getText().toString(); Log.i("TAG", Scode); String Squantity = quantity.getText().toString(); Log.i("TAG", Squantity); } } But I get the below errors (Logcat below). Assistance required 10-22 09:00:16.345: E/AndroidRuntime(4495): FATAL EXCEPTION: main 10-22 09:00:16.345: E/AndroidRuntime(4495): java.lang.ClassCastException: android.widget.LinearLayout cannot be cast to android.widget.TextView 10-22 09:00:16.345: E/AndroidRuntime(4495): at com.symetry.myitprovider.ui.actual$4.onClick(actual.java:173) 10-22 09:00:16.345: E/AndroidRuntime(4495): at android.view.View.performClick(View.java:3131) 10-22 09:00:16.345: E/AndroidRuntime(4495): at android.view.View$PerformClick.run(View.java:12035) 10-22 09:00:16.345: E/AndroidRuntime(4495): at android.os.Handler.handleCallback(Handler.java:587) 10-22 09:00:16.345: E/AndroidRuntime(4495): at android.os.Handler.dispatchMessage(Handler.java:92) 10-22 09:00:16.345: E/AndroidRuntime(4495): at android.os.Looper.loop(Looper.java:132) 10-22 09:00:16.345: E/AndroidRuntime(4495): at android.app.ActivityThread.main(ActivityThread.java:4123) 10-22 09:00:16.345: E/AndroidRuntime(4495): at java.lang.reflect.Method.invokeNative(Native Method) 10-22 09:00:16.345: E/AndroidRuntime(4495): at java.lang.reflect.Method.invoke(Method.java:491) 10-22 09:00:16.345: E/AndroidRuntime(4495): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:844) 10-22 09:00:16.345: E/AndroidRuntime(4495): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:602) 10-22 09:00:16.345: E/AndroidRuntime(4495): at dalvik.system.NativeStart.main(Native Method) EDIT: I have modified my code and now there is no error..but its not working as needed.. The new code is as below.. mSubmitOrders.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { if(mTable.getChildCount()>1){ for(int i = 0; i < mTable.getChildCount(); i++){ //TODO: Figure out how to do this well LinearLayout LL = (LinearLayout)mTable.getChildAt(i); View x = ((View)(LL.getParent()).getParent()); Log.i("TAG", "Past view"); TextView code = (TextView)((ViewGroup) x).getChildAt(2); String Scode = code.getText().toString(); Log.i("TAG", Scode); } But thing is its not getting the texview from TableLayout's Table Row..its getting a different one...the one I have circled in the picture ![Error]:http://semasoftltd.com/error.png

    Read the article

  • <o:massAttribute> affects another components in same <h:panelGrid>

    - by Ignacio Ayuste
    I'm using the new version of OmniFaces 1.8.1, and particullary I start to use the new tag: <o:massAttribute>. Basically, I have the following form with conditionally rendered and disabled fields: <h:form id="formABMProducto"> <h:panelGrid id="datosProducto" columns="4"> <o:massAttribute name="rendered" value="#{cc.attrs.page != 'baja'}"> <h:outputLabel for="codigo" ... /> <h:inputText id="codigo" ... /> <rich:message for="codigo" /> <h:panelGroup /> </o:massAttribute> <o:massAttribute name="rendered" value="#{cc.attrs.page eq 'baja'}"> <h:outputLabel for="codigo" .../> <rich:autocomplete id="codigoProducto" ... /> <rich:message for="codigo" /> <h:panelGroup /> </o:massAttribute> <o:massAttribute name="disabled" value="#{cc.attrs.disableComponents}"> <h:outputLabel for="nombre" ... /> <h:inputTextarea id="nombre" ... /> <rich:message for="nombre" /> <span /> <h:outputLabel for="descripcion" ... /> <h:inputTextarea id="descripcion" ... /> <rich:message for="descripcion" /> <span /> </o:massAttribute> <h:outputLabel value="#{msgs['producto.abm.panel.proveedor.tipo']}" for="CmbTipoProveedor"/> <rich:select id="CmbTipoProveedor" ... /> <rich:message for="CmbTipoProveedor" /> <a4j:commandButton ... /> </h:panelGrid> </h:form> However, when I open the page, the third <o:massAttribute> is also disabling another input fields codigo and codigoProducto. I think this isn't the expected behaviour.

    Read the article

  • When i add a bitmap to an array list the last element is duplicated in previous indexes

    - by saxofone2
    I'm trying to implement a personal way of undo/redo in a finger paint-like app. I have in synthesis three objects: the Main class (named ScorePadActivity), the relative Main Layout (with buttons, menus, etc, as well as a View object where I create my drawings), and a third object named ArrayList where i'm writing the undo/redo code. The problem is, when I press the undo button nothing happens, but if I draw anything again "one-time" and press undo, the screen is updated. If I draw many times, to see any changes happen on screen I have to press the undo button the same number of times I have drawn. Seems like (as in title) when I add a bitmap to the array list the last element is duplicated in previous indexes, and for some strange reason, everytime I press the Undo Button, the system is ok for one time, but starts to duplicate until the next undo. The index increase is verified with a series of System.out.println inserted in code. Now when I draw something on screen, the array list is updated with the code inserted after the invocation of touchup(); method in motionEvent touch_up(); } this.arrayClass.incrementArray(mBitmap); mPath.rewind(); invalidate(); and in ArrayList activity; public void incrementArray(Bitmap mBitmap) { this._mBitmap=mBitmap; _size=undoArray.size(); undoArray.add(_size, _mBitmap); } (All Logs removed for clear reading) The undo button in ScorePadActivity calls the undo method in View activity: Button undobtn= (Button)findViewById(R.id.undo); undobtn.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { mView.undo(); } }); in View activity: public void undo() { this.mBitmap= arrayClass.undo(); mCanvas = new Canvas(mBitmap); mPath.rewind(); invalidate(); } that calls the relative undo method in ArrayList activity: public Bitmap undo() { // TODO Auto-generated method stub _size=undoArray.size(); if (_size>1) { undoArray.remove(_size-1); _size=undoArray.size(); _mBitmap = ((Bitmap) undoArray.get(_size-1)).copy(Bitmap.Config.ARGB_8888,true); } return _mBitmap; } return mBitmap and invalidate: Due to my bad English I have made a scheme to make the problem more clear: I have tried with HashMap, with a simple array, I have tried to change mPath.rewind(); with reset();, new Path(); etc but nothing. Why? Sorry for the complex answer, i want give you a great thanks in advance. Best regards

    Read the article

  • jQuery .ajax doesn't load Google Adsense

    - by Sahas Katta
    Hey Everyone, Just ran into an odd issue. I have a simple WP loop and instead of regular NEXT/BACK pages, I use a jQuery powered $.ajax get to append the following page to the current page. It works perfectly. However, I choose to insert a Google Adsense unit every 5th story. Unfortunately, the Adsense unit that is brought in with a second, third, or etc page load don't render. Here's my loop: 10 stories per page, Adsense after the 4th one. <?php $count = 0; ?> <?php if ( have_posts() ) : ?> <?php while ( have_posts() ) : the_post(); ?> <?php $count++; ?> <div class="card"> <div class="title"> <a href="<?php the_permalink(); ?>" title="<?php the_title(); ?>"><span><?php the_title(); ?></span></a> </div> </div> <?php if ($count == 4) : ?> <div class="card"> <!-- ADSENSE CODE HERE (Straight from Google Adsense Panel, no tweaks.) --> </div> <?php endif; ?> As for my jQuery script, here's how that looks: $.ajax({ url: nextPageLink, type: 'GET', success: function(data) { $(data).find('#reviews .card').appendTo('#reviews'); }, error: function(xhr, status, error) { $('.loadination').addClass('hidden'); } }); Keep in mind, I just simplified my code to give you guys an example. The code above was just the essentials. All the loading stuff works perfectly. Images, text, links, etc all load just fine. However, the Google Adsense unit doesn't. Any help would be appreciated. Thanks and Happy Holidays!

    Read the article

  • How would I add an if statement into MSQLI query?

    - by Josh
    Okay so I'm just learning mysqli and I'm having a little trouble putting this code together. I've posted the mysqli query below and then below that is the code I'm trying to combine with the mysqli query and I can't seem to get it to work. Maybe what I'm doing isn't possible, but the third section below is how I had the query written for mysql and it's working fine. Answers in code are appreciated! Thanks! MYSQLI QUERY: <?php require("../config.php"); if ($stmt = $mysqli->prepare("SELECT firstname,lastname,spousefirst,phonecell,email,date,contacttype,status FROM contacts WHERE contacttype IN ('Buyer','Seller','Buyer / Seller','Investor') ORDER BY date DESC")) { $stmt->execute(); $stmt->bind_results($firstname,$lastname,$spousefirst,$phonecell,$email,$date,$contacttype,$status); while ($stmt->fetch()) { echo ''.$firstname.' '." ".' '.$lastname.' '.",".' '.$spousefirst.' '.",".' '.$phonecell.' '.",".' '.$email.' '.",".' '.$date.' '.",".' '.$contacttype.' '.",".' '.$status.'</br>'; } $stmt->close(); } $mysqli->close(); ?> WHAT I'M TRYING TO COMBINE THE ABOVE WITH: if (($_GET['date'] == 'today')) { $sql = "SELECT * FROM contacts WHERE contacttype IN ('Buyer','Seller','Buyer / Seller','Investor') AND date = DATE(NOW()) ORDER BY date DESC"; } WHAT I HAD BEFORE WITH MYSQL THAT WORKS: <?php require("../config.php"); $sql = "SELECT * FROM contacts WHERE contacttype IN ('Buyer','Seller','Buyer / Seller','Investor') AND status = 'New' ORDER BY date DESC"; if (($_GET['date'] == 'today')) { $sql = "SELECT * FROM contacts WHERE contacttype IN ('Buyer','Seller','Buyer / Seller','Investor') AND date = DATE(NOW()) ORDER BY date DESC"; } ?>

    Read the article

  • how to create multiple tcp connections between server and client

    - by lowcosthighperformance
    I am new in Unix/Linux networking programming, so I have written server-client program in below.In this code there is one socket between client and server, client requests to server, then server responses from 1 to 100 numbers to client. So my question is how can we do this process with 3 socket( tcp connection) without using thread? ( e.g. First socket runs then second runs then third runs then first again .. ) Do you have any suggestion? Thank you client.c int main() { int sock; struct sockaddr_in sa; int ret; char buf[1024]; int x; sock = socket (AF_INET, SOCK_STREAM, 0); bzero (&sa, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_port = htons(SERVER_PORT); inet_pton (AF_INET, SERVER_IP, &sa.sin_addr); ret = connect (sock, (const struct sockaddr *) &sa,sizeof (sa)); if (ret != 0) { printf ("connect failed\n"); exit (0); } x = 0; while (x != -1) { read (sock, buf , sizeof(int)); x = ntohl(*((int *)buf)); if (x != -1) printf ("int rcvd = %d\n", x); } close (sock); exit (0); } server.c int main() { int list_sock; int conn_sock; struct sockaddr_in sa, ca; socklen_t ca_len; char buf[1024]; int i; char ipaddrstr[IPSTRLEN]; list_sock = socket (AF_INET, SOCK_STREAM, 0); bzero (&sa, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_addr.s_addr = htonl(INADDR_ANY); sa.sin_port = htons(SERVER_PORT); bind (list_sock,(struct sockaddr *) &sa,sizeof(sa)); listen (list_sock, 5); while (1){ bzero (&ca, sizeof(ca)); ca_len = sizeof(ca); // important to initialize conn_sock = accept (list_sock,(struct sockaddr *) &ca,&ca_len); printf ("connection from: ip=%s port=%d \n",inet_ntop(AF_INET, &(ca.sin_addr), ipaddrstr, IPSTRLEN),ntohs(ca.sin_port)); for (i=0; i<100; ++i){ *((int *)buf) = htonl(i+20); // we using converting to network byte order write (conn_sock, buf, sizeof(int)); } * ((int *)buf) = htonl(-1); write (conn_sock, buf, sizeof(int)); close (conn_sock); printf ("server closed connection to client\n"); } }

    Read the article

  • program received signal SIGABRT (xcode)

    - by manish1990
    #import <UIKit/UIKit.h> @interface tableview : UIViewController<UITableViewDataSource> { NSArray *listOfItems; } @property(nonatomic,retain) NSArray *listOfItems; @end #import "tableview.h" @implementation tableview @synthesize listOfItems; - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier ]autorelease]; } //NSString *cellValue = [listOfItems objectAtIndex:indexPath.row]; cell.textLabel.text = [listOfItems objectAtIndex:indexPath.row]; return cell; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return 3; } - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]; if (self) { // Custom initialization } return self; } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } #pragma mark - View lifecycle - (void)viewDidLoad { listOfItems = [[NSArray alloc] initWithObjects:@"first",@"second",@"third", nil]; //listOfItems = [[NSMutableArray alloc]init]; // [listOfItems addObject:@"first"]; //[listOfItems addObject:@"second"]; [super viewDidLoad]; // Do any additional setup after loading the view from its nib. } -(void)dealloc { [listOfItems release]; [super dealloc]; } @end GNU gdb 6.3.50-20050815 (Apple version gdb-1708) (Mon Aug 15 16:03:10 UTC 2011) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "x86_64-apple-darwin".sharedlibrary apply-load-rules all Attaching to process 438. 2012-04-27 13:33:23.276 tableview test[438:207] -[UIView tableView:numberOfRowsInSection:]: unrecognized selector sent to instance 0x6855500 2012-04-27 13:33:23.362 tableview test[438:207] * Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[UIView tableView:numberOfRowsInSection:]: unrecognized selector sent to instance 0x6855500' * First throw call stack: (0x13bb052 0x154cd0a 0x13bcced 0x1321f00 0x1321ce2 0x1ecf2b 0x1ef722 0x9f7c7 0x9f2c1 0xa228c 0xa6783 0x51322 0x13bce72 0x1d6592d 0x1d6f827 0x1cf5fa7 0x1cf7ea6 0x1d8330c 0x23530 0x138f9ce 0x1326670 0x12f24f6 0x12f1db4 0x12f1ccb 0x12a4879 0x12a493e 0x12a9b 0x2282 0x21f5) terminate called throwing an exceptionCurrent language: auto; currently objective-c (gdb)

    Read the article

  • WP7 Button inside ListBox only "clicks" every other press

    - by Zik
    I have a button defined inside of a DataTemplate for my list box. <phone:PhoneApplicationPage.Resources> <DataTemplate x:Key="ListTemplate"> <Grid Margin="12,12,24,12"> <Grid.RowDefinitions> <RowDefinition Height="Auto" /> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto" /> <ColumnDefinition Width="*" /> </Grid.ColumnDefinitions> <Button Grid.Column="0" Name="EnableDisableButton" Click="EnableDisableButton_Click" BorderBrush="Transparent"> <Grid> <Grid.RowDefinitions> <RowDefinition Height="Auto" /> <RowDefinition Height="Auto" /> </Grid.RowDefinitions> <Image Grid.Row="0" Source="\Images\img.dark.png" Width="48" Height="48" Visibility="{StaticResource PhoneDarkThemeVisibility}" /> <Image Grid.Row="0" Source="\Images\img.light.png" Width="48" Height="48" Visibility="{StaticResource PhoneLightThemeVisibility}" /> <Rectangle Grid.Row="1" Width="48" Height="8" Fill="{Binding CurrentColor}" RadiusX="4" RadiusY="4" /> </Grid> </Button> <Grid Grid.Column="1"> <... more stuff here ...> </Grid> </Grid> </DataTemplate> </phone:PhoneApplicationPage.Resources> What I'm seeing is that the first time I press the button, the Click event fires. The second time I press it, it does not fire. Third press, fires. Fourth press, does not fire. Etc. Originally I had it bound to a command but that was behaving the same way. (I put a Debug.WriteLine() in the event handler so I know when it fires.) Any ideas? It's really odd that the click event only fires every other time.

    Read the article

  • Handling macro redefinition without modifying .h files ... C / C++ language

    - by user310119
    Background: Let assume that I have two header files a.h and b.h. a.h contains: #define VAR 1 b.h contains: #define VAR 2 Note: The name of both of the macro is same. Let say I have some file myFile.c which includes both of the header files i.e. a.h and b.h. When I try to access VAR, I get a redefinition error of VAR. In order to resolve this problem, I inserted #ifndef VAR statement in both a.h and b.h files to prevent this error. a.h file becomes #ifndef VAR #define VAR 1 #endif b.h file becomes #ifndef VAR #define VAR 2 #endif Note: The header file can contain multiple macros, not just one macro. Problem: Let's assume that a.h and b.h files are obtained from third party library. These files don't contain #ifndef VAR statement. I am not allowed to change their header files. Can I resolve macro 'VAR' redefinition error in myFile.c or myFile.cpp file which uses VAR macro? I know I #undef VAR can be used to undefine a macro VAR. How can I selectively include VAR later in my program? i.e. on line 10 of myFile.c code I should be able to refer to VAR definition from a.h file, on line 15 of my code I should be able to refer to VAR from b.h file and on line 18 again I should be able to refer to VAR from a.h file. In short, am I able to do macro polymorphism ? Given a name of header file, it should refer to macro definition present in that file. I thought of using namespace trick to resolve an issue. Define first header file in namespace first and second header file in namespace second. I tried defining two namespaces. First namespace contains #include a.h and second namespace contains b.h. However, namespace trick does not work with macro. When I tried to access firstns::VAR, compiler reports an error message. Can you please suggest some way?

    Read the article

  • unmet dependencies in Ubuntu 12.04

    - by lee.O
    I tried today to install a dvb-card on my Ubuntu 12.04 (Linux blauhai-linux 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ). The installation failed with an error. After that, i tried to install python (it was already installed but i got this error): linux:~$ sudo apt-get install git Reading package lists... Done Building dependency tree Reading state information... Done git is already the newest version. You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: python-glade2:i386 : Depends: python:i386 (< 2.5) but it is not going to be installed Depends: python-support:i386 (= 0.3.4) but it is not installable Depends: python:i386 (= 2.4) but it is not going to be installed Depends: libglade2-0:i386 (= 1:2.5.1) but it is not going to be installed Depends: python-gtk2:i386 (= 2.8.6-8) but it is not going to be installed python-numeric:i386 : Depends: python:i386 (< 2.5) but it is not going to be installed Depends: python:i386 (= 2.3) but it is not going to be installed Depends: python-central:i386 (= 0.5.7) but it is not installable E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). well, i can read and tried the proposed command, but then i get this: linux:~$ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: libopenal1:i386 libsdl-ttf2.0-0:i386 libkrb5-3:i386 libgconf-2-4:i386 libsm-dev libatk1.0-0:i386 libk5crypto3:i386 libstdc++5:i386 libqt4-declarative:i386 libxcomposite1:i386 libice-dev libgail18:i386 libldap-2.4-2:i386 libao-common libv4l-0:i386 liblcms1:i386 libqt4-qt3support:i386 libroken18-heimdal:i386 libunistring0:i386 libcupsimage2:i386 libgphoto2-port0:i386 libidn11:i386 libnss3:i386 libcaca0:i386 gtk2-engines:i386 libgudev-1.0-0:i386 libjpeg-turbo8:i386 libpthread-stubs0 libcairo-gobject2:i386 libavc1394-0:i386 libjpeg8:i386 libotr2 libaio1:i386 libsane:i386 odbcinst1debian2 odbcinst1debian2:i386 libqt4-test:i386 libqt4-script:i386 libqt4-designer:i386 libsdl-mixer1.2:i386 libqt4-network:i386 libqt4-dbus:i386 libcap2:i386 libproxy1:i386 ibus-gtk:i386 libdbus-glib-1-2:i386 libtdb1:i386 libasn1-8-heimdal:i386 libspeex1:i386 libxslt1.1:i386 libgomp1:i386 libcapi20-3:i386 libibus-1.0-0:i386 libcairo2:i386 libgnutls26:i386 libopenal-data odbcinst libgssapi3-heimdal:i386 libcanberra0:i386 libtasn1-3:i386 libfreetype6:i386 x11proto-kb-dev gtk2-engines-murrine:i386 libwavpack1:i386 libqt4-opengl:i386 libsoup-gnome2.4-1:i386 libv4lconvert0:i386 gstreamer0.10-plugins-good:i386 libc6-i386 lib32gcc1 libqt4-xmlpatterns:i386 librsvg2-common:i386 libdatrie1:i386 xtrans-dev libavahi-common-data:i386 libiec61883-0:i386 lib32asound2 libgdk-pixbuf2.0-0:i386 libsdl-image1.2:i386 libp11-kit0:i386 x11proto-input-dev libwind0-heimdal:i386 libpixman-1-0:i386 libsdl1.2debian:i386 libxaw7:i386 libgdbm3:i386 libcups2:i386 libcurl3:i386 libqtcore4:i386 libxinerama1:i386 libesd0:i386 libmikmod2:i386 libkrb5support0:i386 libxft2:i386 libxt-dev libcroco3:i386 libpulse-mainloop-glib0:i386 libice6:i386 libaa1:i386 libieee1284-3:i386 libgcrypt11:i386 libthai0:i386 libao4:i386 libkeyutils1:i386 libxmu6:i386 libcanberra-gtk0:i386 libvorbisfile3:i386 libqt4-sql:i386 esound-common libxpm4:i386 libqt4-svg:i386 libusb-0.1-4:i386 libgail-common:i386 libxrender1:i386 libhcrypto4-heimdal:i386 libraw1394-11:i386 libnspr4:i386 libshout3:i386 libdv4:i386 libhx509-5-heimdal:i386 libxau-dev libqt4-xml:i386 gstreamer0.10-x:i386 libgettextpo0:i386 libxss1:i386 libgd2-xpm:i386 libheimbase1-heimdal:i386 libtiff4:i386 libsdl-net1.2:i386 libjasper1:i386 libgnome-keyring0:i386 libxtst6:i386 gtk2-engines-pixbuf:i386 libqtgui4:i386 libtag1c2a:i386 librsvg2-2:i386 libavahi-client3:i386 libssl0.9.8:i386 libmpg123-0:i386 libmad0:i386 libsasl2-2:i386 xorg-sgml-doctools libgsoap1 gtk2-engines-oxygen:i386 libfontconfig1:i386 xaw3dg:i386 libpango1.0-0:i386 libsm6:i386 libx11-dev libheimntlm0-heimdal:i386 libpulsedsp:i386 lib32stdc++6 libx11-doc libqt4-sql-mysql:i386 libxcb-render0:i386 libodbc1:i386 libexif12:i386 libqt4-scripttools:i386 librtmp0:i386 libgssapi-krb5-2:i386 libxi6:i386 libqtwebkit4:i386 libxcb1-dev libxp6:i386 libaudio2:i386 libxcursor1:i386 libxcb-shm0:i386 libxt6:i386 libxv1:i386 libsasl2-modules:i386 libavahi-common3:i386 libxrandr2:i386 x11proto-core-dev libsqlite3-0:i386 libmng1:i386 libgtk2.0-0:i386 libxdmcp-dev libpthread-stubs0-dev libltdl7:i386 libkrb5-26-heimdal:i386 libssl1.0.0:i386 glib-networking:i386 libgpg-error0:i386 libsoup2.4-1:i386 libgphoto2-2:i386 libtag1-vanilla:i386 libaudiofile1:i386 libglade2-0:i386 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: default-jre default-jre-headless icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-netx icedtea-netx-common libglade2-0:i386 libpython3.2 openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib python3 python3-minimal python3-uno python3.2 python3.2-minimal Suggested packages: icedtea-plugin sun-java6-fonts fonts-ipafont-gothic fonts-ipafont-mincho ttf-telugu-fonts ttf-oriya-fonts ttf-kannada-fonts ttf-bengali-fonts python3-doc python3-tk python3.2-doc binfmt-support The following packages will be REMOVED: activity-log-manager-control-center aisleriot alacarte apparmor apport apport-gtk apt-xapian-index aptdaemon apturl apturl-common bluez bluez-alsa bluez-alsa:i386 bluez-gstreamer checkbox checkbox-qt command-not-found compiz compiz-gnome compiz-plugins-main-default compizconfig-backend-gconf deja-dup duplicity eog evolution-data-server firefox firefox-globalmenu firefox-gnome-support foomatic-db-compressed-ppds gconf-editor gconf2 gdb gedit gir1.2-mutter-3.0 gir1.2-peas-1.0 gir1.2-rb-3.0 gir1.2-totem-1.0 gir1.2-ubuntuoneui-3.0 gksu gnome-applets gnome-applets-data gnome-bluetooth gnome-contacts gnome-control-center gnome-media gnome-menus gnome-orca gnome-panel gnome-panel-data gnome-session-fallback gnome-shell gnome-sudoku gnome-terminal gnome-terminal-data gnome-themes-standard gnome-tweak-tool gnome-user-share gstreamer0.10-gconf gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter hplip hplip-data ia32-libs ia32-libs-multiarch:i386 ibus ibus-pinyin ibus-table indicator-datetime indicator-power jockey-common jockey-gtk landscape-client-ui-install language-selector-common language-selector-gnome launchpad-integration libcanberra-gtk-module libcanberra-gtk-module:i386 libcanberra-gtk3-module libcompizconfig0 libfolks-eds25 libgksu2-0 libgnome-media-profiles-3.0-0 libgnome2-0 libgnome2-common libgnomevfs2-0 libgnomevfs2-common libgweather-3-0 libgweather-common libgwibber-gtk2 libgwibber2 libmetacity-private0 libmutter0 libpeas-1.0-0 libpurple-bin libpython2.7 libreoffice-gnome librhythmbox-core5 libsyncdaemon-1.0-1 libtotem0 libubuntuoneui-3.0-1 light-themes lsb-release metacity metacity-common mutter-common nautilus-dropbox nautilus-share network-manager-gnome nvidia-common nvidia-settings nvidia-settings-updates onboard oneconf openjdk-7-jdk openjdk-7-jre openprinting-ppds pidgin pidgin-libnotify pidgin-otr printer-driver-foo2zjs printer-driver-ptouch printer-driver-pxljr printer-driver-sag-gdi printer-driver-splix python python-appindicator python-apport python-apt python-apt-common python-aptdaemon python-aptdaemon.gtk3widgets python-aptdaemon.pkcompat python-brlapi python-cairo python-central python-chardet python-configglue python-crypto python-cups python-cupshelpers python-dateutil python-dbus python-debian python-debtagshw python-defer python-dirspec python-egenix-mxdatetime python-egenix-mxtools python-gconf python-gdbm python-gi python-gi-cairo python-glade2:i386 python-gmenu python-gnomekeyring python-gnupginterface python-gobject python-gobject-2 python-gpgme python-gst0.10 python-gtk2 python-httplib2 python-ibus python-imaging python-keyring python-launchpadlib python-lazr.restfulclient python-lazr.uri python-libproxy python-libxml2 python-louis python-mako python-markupsafe python-minimal python-notify python-numeric:i386 python-oauth python-openssl python-packagekit python-pam python-pexpect python-piston-mini-client python-pkg-resources python-problem-report python-protobuf python-pyatspi2 python-pycurl python-pyinotify python-renderpm python-reportlab python-reportlab-accel python-serial python-simplejson python-smbc python-software-properties python-speechd python-twisted-bin python-twisted-core python-twisted-names python-twisted-web python-ubuntu-sso-client python-ubuntuone-client python-ubuntuone-control-panel python-ubuntuone-storageprotocol python-uno python-virtkey python-wadllib python-xapian python-xdg python-xkit python-zeitgeist python-zope.interface python2.7 python2.7-minimal rhythmbox rhythmbox-mozilla rhythmbox-plugin-cdrecorder rhythmbox-plugin-magnatune rhythmbox-plugin-zeitgeist rhythmbox-plugins rhythmbox-ubuntuone screen-resolution-extra sessioninstaller skype software-center software-center-aptdaemon-plugins software-properties-common software-properties-gtk system-config-printer-common system-config-printer-gnome system-config-printer-udev texlive-extra-utils totem totem-mozilla totem-plugins ubuntu-artwork ubuntu-desktop ubuntu-minimal ubuntu-sso-client ubuntu-sso-client-gtk ubuntu-standard ubuntu-system-service ubuntuone-client ubuntuone-client-gnome ubuntuone-control-panel ubuntuone-couch ubuntuone-installer ufw unattended-upgrades unity unity-2d unity-common unity-lens-applications unity-lens-video unity-scope-musicstores unity-scope-video-remote update-manager update-manager-core update-notifier update-notifier-common usb-creator-common usb-creator-gtk virtualbox virtualbox-dkms virtualbox-qt xdiagnose xul-ext-ubufox zeitgeist zeitgeist-core zeitgeist-datahub The following NEW packages will be installed: default-jre default-jre-headless icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-netx icedtea-netx-common libglade2-0:i386 libpython3.2 openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib python3 python3-minimal python3-uno python3.2 python3.2-minimal WARNING: The following essential packages will be removed. This should NOT be done unless you know exactly what you are doing! python-minimal python2.7-minimal (due to python-minimal) 0 upgraded, 16 newly installed, 273 to remove and 0 not upgraded. 2 not fully installed or removed. Need to get 39.1 MB of archives. After this operation, 324 MB disk space will be freed. You are about to do something potentially harmful. To continue type in the phrase 'Yes, do as I say!' ?] Thats not good, is it?! Should i run this command or should i run another command to fix this problem? Would be great if somebody can help me. :) Thanks in advance. best regards

    Read the article

  • Multi-tenant ASP.NET MVC – Introduction

    - by zowens
    I’ve read a few different blogs that talk about multi-tenancy and how to resolve some of the issues surrounding multi-tenancy. What I’ve come to realize is that these implementations overcomplicate the issues and give only a muddy implementation! I’ve seen some really illogical code out there. I have recently been building a multi-tenancy framework for internal use at eagleenvision.net. Through this process, I’ve realized a few different techniques to make building multi-tenant applications actually quite easy. I will be posting a few different entries over the issue and my personal implementation. In this first post, I will discuss what multi-tenancy means and how my implementation will be structured.   So what’s the problem? Here’s the deal. Multi-tenancy is basically a technique of code-reuse of web application code. A multi-tenant application is an application that runs a single instance for multiple clients. Here the “client” is different URL bindings on IIS using ASP.NET MVC. The problem with different instances of the, essentially, same application is that you have to spin up different instances of ASP.NET. As the number of running instances of ASP.NET grows, so does the memory footprint of IIS. Stack Exchange shifted its architecture to multi-tenancy March. As the blog post explains, multi-tenancy saves cost in terms of memory utilization and physical disc storage. If you use the same code base for many applications, multi-tenancy just makes sense. You’ll reduce the amount of work it takes to synchronize the site implementations and you’ll thank your lucky stars later for choosing to use one application for multiple sites. Multi-tenancy allows the freedom of extensibility while relying on some pre-built code.   You’d think this would be simple. I have actually seen a real lack of reference material on the subject in terms of ASP.NET MVC. This is somewhat surprising given the number of users of ASP.NET MVC. However, I will certainly fill the void ;). Implementing a multi-tenant application takes a little thinking. It’s not straight-forward because the possibilities of implementation are endless. I have yet to see a great implementation of a multi-tenant MVC application. The only one that comes close to what I have in mind is Rob Ashton’s implementation (all the entries are listed on this page). There’s some really nasty code in there… something I’d really like to avoid. He has also written a library (MvcEx) that attempts to aid multi-tenant development. This code is even worse, in my honest opinion. Once I start seeing Reflection.Emit, I have to assume the worst :) In all seriousness, if his implementation makes sense to you, use it! It’s a fine implementation that should be given a look. At least look at the code. I will reference MvcEx going forward as a comparison to my implementation. I will explain why my approach differs from MvcEx and how it is better or worse (hopefully better).   Core Goals of my Multi-Tenant Implementation The first, and foremost, goal is to use Inversion of Control containers to my advantage. As you will see throughout this series, I pass around containers quite frequently and rely on their use heavily. I will be using StructureMap in my implementation. However, you could probably use your favorite IoC tool instead. <RANT> However, please don’t be stupid and abstract your IoC tool. Each IoC is powerful and by abstracting the capabilities, you’re doing yourself a real disservice. Who in the world swaps out IoC tools…? No one!</RANT> (It had to be said.) I will outline some of the goodness of StructureMap as we go along. This is really an invaluable tool in my tool belt and simple to use in my multi-tenant implementation. The second core goal is to represent a tenant as easily as possible. Just as a dependency container will be a first-class citizen, so will a tenant. This allows us to easily extend and use tenants. This will also allow different ways of “plugging in” tenants into your application. In my implementation, there will be a single dependency container for a single tenant. This will enable isolation of the dependencies of the tenant. The third goal is to use composition as a means to delegate “core” functions out to the tenant. More on this later.   Features In MvcExt, “Modules” are a code element of the infrastructure. I have simplified this concept and have named this “Features”. A feature is a simple element of an application. Controllers can be specified to have a feature and actions can have “sub features”. Each tenant can select features it needs and the other features will be hidden to the tenant’s users. My implementation doesn’t require something to be a feature. A controller can be common to all tenants. For example, (as you will see) I have a “Content” controller that will return the CSS, Javascript and Images for a tenant. This is common logic to all tenants and shouldn’t be hidden or considered a “feature”; Content is a core component.   Up next My next post will be all about the code. I will reveal some of the foundation to the way I do multi-tenancy. I will have posts dedicated to Foundation, Controllers, Views, Caching, Content and how to setup the tenants. Each post will be in-depth about the issues and implementation details, while adhering to my core goals outlined in this post. As always, comment with questions of DM me on twitter or send me an email.

    Read the article

  • Consume WCF Service InProcess using Agatha and WCF

    - by REA_ANDREW
    I have been looking into this lately for a specific reason.  Some integration tests I want to write I want to control the types of instances which are used inside the service layer but I want that control from the test class instance.  One of the problems with just referencing the service is that a lot of the time this will by default be done inside a different process.  I am using StructureMap as my DI of choice and one of the tools which I am using inline with RhinoMocks is StructureMap.AutoMocking.  With StructureMap the main entry point is the ObjectFactory.  This will be process specific so if I decide that the I want a certain instance of a type to be used inside the ServiceLayer I cannot configure the ObjectFactory from my test class as that will only apply to the process which it belongs to. This is were I started thinking about two things: Running a WCF in process Being able to share mocked instances across processes A colleague in work pointed me to a project which is for the latter but I thought that it would be a better solution if I could run the WCF Service in process.  One of the projects which I use when I think about WCF Services is AGATHA, and the one which I have to used to try and get my head around doing this. Another asset I have is a book called Programming WCF Services by Juval Lowy and if you have not heard of it or read it I would definately recommend it.  One of the many topics that is inside this book is the type of configuration you need to communicate with a service in the same process, and it turns out to be quite simple from a config point of view. <system.serviceModel> <services> <service name="Agatha.ServiceLayer.WCF.WcfRequestProcessor"> <endpoint address ="net.pipe://localhost/MyPipe" binding="netNamedPipeBinding" contract="Agatha.Common.WCF.IWcfRequestProcessor"/> </service> </services> <client> <endpoint name="MyEndpoint" address="net.pipe://localhost/MyPipe" binding="netNamedPipeBinding" contract="Agatha.Common.WCF.IWcfRequestProcessor"/> </client> </system.serviceModel>   You can see here that I am referencing the Agatha object and contract here, but also that my binding and the address is something called Named Pipes.  THis is sort of the “Magic” which makes it happen in the same process. Next I need to open the service prior to calling the methods on a proxy which I also need.  My initial attempt at the proxy did not use any Agatha specific coding and one of the pains I found was that you obviously need to give your proxy the known types which the serializer can be aware of.  So we need to add to the known types of the proxy programmatically.  I came across the following blog post which showed me how easy it was http://bloggingabout.net/blogs/vagif/archive/2009/05/18/how-to-programmatically-define-known-types-in-wcf.aspx. First Pass So with this in mind, and inside a console app this was my first pass at consuming a service in process.  First here is the proxy which I made making use of the Agatha IWcfRequestProcessor contract. public class InProcProxy : ClientBase<Agatha.Common.WCF.IWcfRequestProcessor>, Agatha.Common.WCF.IWcfRequestProcessor { public InProcProxy() { } public InProcProxy(string configurationName) : base(configurationName) { } public Agatha.Common.Response[] Process(params Agatha.Common.Request[] requests) { return Channel.Process(requests); } public void ProcessOneWayRequests(params Agatha.Common.OneWayRequest[] requests) { Channel.ProcessOneWayRequests(requests); } } So with the proxy in place I could then use this after opening the service so here is the code which I use inside the console app make the request. static void Main(string[] args) { ComponentRegistration.Register(); ServiceHost serviceHost = new ServiceHost(typeof(Agatha.ServiceLayer.WCF.WcfRequestProcessor)); serviceHost.Open(); Console.WriteLine("Service is running...."); using (var proxy = new InProcProxy()) { foreach (var operation in proxy.Endpoint.Contract.Operations) { foreach (var t in KnownTypeProvider.GetKnownTypes(null)) { operation.KnownTypes.Add(t); } } var request = new GetProductsRequest(); var responses = proxy.Process(new[] { request }); var response = (GetProductsResponse)responses[0]; Console.WriteLine("{0} Products have been retrieved", response.Products.Count); } serviceHost.Close(); Console.WriteLine("Finished"); Console.ReadLine(); } So what I used here is the KnownTypeProvider of Agatha to easily get all the types I need for the service/proxy and add them to the proxy.  My Request handler for this was just a test one which always returned 2 products. public class GetProductsHandler : RequestHandler<GetProductsRequest,GetProductsResponse> { public override Agatha.Common.Response Handle(GetProductsRequest request) { return new GetProductsResponse { Products = new List<ProductDto> { new ProductDto{}, new ProductDto{} } }; } } Second Pass Now after I did this I started reading up some more on some resources including more by Davy Brion and others on Agatha.  Now it turns out that the work I did above to create a derived class of the ClientBase implementing Agatha.Common.WCF.IWcfRequestProcessor was not necessary due to a nice class which is present inside the Agatha code base, RequestProcessorProxy which takes care of this for you! :-) So disregarding that class I made for the proxy and changing my code to use it I am now left with the following: static void Main(string[] args) { ComponentRegistration.Register(); ServiceHost serviceHost = new ServiceHost(typeof(Agatha.ServiceLayer.WCF.WcfRequestProcessor)); serviceHost.Open(); Console.WriteLine("Service is running...."); using (var proxy = new RequestProcessorProxy()) { var request = new GetProductsRequest(); var responses = proxy.Process(new[] { request }); var response = (GetProductsResponse)responses[0]; Console.WriteLine("{0} Products have been retrieved", response.Products.Count); } serviceHost.Close(); Console.WriteLine("Finished"); Console.ReadLine(); }   Cheers for now, Andy References Agatha WCF InProcess Without WCF StructureMap.AutoMocking Cross Process Mocking Agatha Programming WCF Services by Juval Lowy

    Read the article

  • Unity completely broken after upgrade to 12.10?

    - by NlightNFotis
    I am facing a very frustrating issue with my computer right now. I successfully upgraded to Ubuntu 12.10 this afternoon, but after the upgrade, the graphical user interface seems completely broken. To be more specific, I can not get the Unity bar to appear on the right. I have tried many things, including (but not limited to) purging and then reinstalling the fglrx drivers, apt-get install --reinstall ubuntu-desktop, apt-get install --reinstall unity, tried to remove the Xorg and Compiz configurations, checked to see if the Ubuntu Unity wall was enabled (it was) in ccsm, all to no avail. Could someone help me troubleshoot and essentially fix this issue? NOTE: This is the output when I try to enable unity via a terminal: compiz (core) - Info: Loading plugin: core compiz (core) - Info: Starting plugin: core unity-panel-service: no process found compiz (core) - Info: Loading plugin: reset compiz (core) - Error: Failed to load plugin: reset compiz (core) - Info: Loading plugin: ccp compiz (core) - Info: Starting plugin: ccp compizconfig - Info: Backend : gsettings compizconfig - Info: Integration : true compizconfig - Info: Profile : unity compiz (core) - Info: Loading plugin: composite compiz (core) - Info: Starting plugin: composite compiz (core) - Info: Loading plugin: opengl X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 153 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 22 Current serial number in output stream: 22 compiz (core) - Info: Unity is not supported by your hardware. Enabling software rendering instead (slow). compiz (core) - Info: Starting plugin: opengl Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 compiz (core) - Error: Plugin initScreen failed: opengl compiz (core) - Error: Failed to start plugin: opengl compiz (core) - Info: Unloading plugin: opengl compiz (core) - Info: Loading plugin: decor compiz (core) - Info: Starting plugin: decor compiz (decor) - Warn: requested a pixmap type decoration when compositing isn't available compiz (decor) - Warn: requested a pixmap type decoration when compositing isn't available compiz (decor) - Warn: requested a pixmap type decoration when compositing isn't available compiz (decor) - Warn: requested a pixmap type decoration when compositing isn't available compiz (decor) - Warn: requested a pixmap type decoration when compositing isn't available compiz (decor) - Warn: requested a pixmap type decoration when compositing isn't available compiz (decor) - Warn: requested a pixmap type decoration when compositing isn't available compiz (decor) - Warn: requested a pixmap type decoration when compositing isn't available compiz (decor) - Warn: requested a pixmap type decoration when compositing isn't available compiz (decor) - Warn: requested a pixmap type decoration when compositing isn't available compiz (decor) - Warn: requested a pixmap type decoration when compositing isn't available Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 compiz (core) - Info: Loading plugin: imgpng compiz (core) - Info: Starting plugin: imgpng compiz (core) - Info: Loading plugin: vpswitch compiz (core) - Info: Starting plugin: vpswitch compiz (core) - Info: Loading plugin: resize compiz (core) - Info: Starting plugin: resize Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 compiz (core) - Info: Loading plugin: compiztoolbox compiz (core) - Info: Starting plugin: compiztoolbox compiz (core) - Error: Plugin 'opengl' not loaded. compiz (core) - Info: Loading plugin: move compiz (core) - Info: Starting plugin: move compiz (core) - Info: Loading plugin: gnomecompat compiz (core) - Info: Starting plugin: gnomecompat compiz (core) - Info: Loading plugin: mousepoll compiz (core) - Info: Starting plugin: mousepoll compiz (core) - Info: Loading plugin: wall compiz (core) - Info: Starting plugin: wall compiz (core) - Error: Plugin 'opengl' not loaded. compiz (core) - Error: Plugin init failed: wall compiz (core) - Error: Failed to start plugin: wall compiz (core) - Info: Unloading plugin: wall compiz (core) - Info: Loading plugin: regex compiz (core) - Info: Starting plugin: regex compiz (core) - Info: Loading plugin: snap compiz (core) - Info: Starting plugin: snap compiz (core) - Info: Loading plugin: unitymtgrabhandles compiz (core) - Info: Starting plugin: unitymtgrabhandles compiz (core) - Error: Plugin 'opengl' not loaded. compiz (core) - Error: Plugin init failed: unitymtgrabhandles compiz (core) - Error: Failed to start plugin: unitymtgrabhandles compiz (core) - Info: Unloading plugin: unitymtgrabhandles compiz (core) - Info: Loading plugin: place compiz (core) - Info: Starting plugin: place compiz (core) - Info: Loading plugin: grid compiz (core) - Info: Starting plugin: grid Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 compiz (core) - Info: Loading plugin: animation compiz (core) - Info: Starting plugin: animation compiz (core) - Error: Plugin 'opengl' not loaded. compiz (core) - Error: Plugin init failed: animation compiz (core) - Error: Failed to start plugin: animation compiz (core) - Info: Unloading plugin: animation compiz (core) - Info: Loading plugin: fade compiz (core) - Info: Starting plugin: fade compiz (core) - Error: Plugin 'opengl' not loaded. compiz (core) - Error: Plugin init failed: fade compiz (core) - Error: Failed to start plugin: fade compiz (core) - Info: Unloading plugin: fade compiz (core) - Info: Loading plugin: session compiz (core) - Info: Starting plugin: session compiz (core) - Info: Loading plugin: expo compiz (core) - Info: Starting plugin: expo compiz (core) - Error: Plugin 'opengl' not loaded. compiz (core) - Error: Plugin init failed: expo compiz (core) - Error: Failed to start plugin: expo compiz (core) - Info: Unloading plugin: expo compiz (core) - Info: Loading plugin: ezoom compiz (core) - Info: Starting plugin: ezoom compiz (core) - Error: Plugin 'opengl' not loaded. compiz (core) - Error: Plugin init failed: ezoom compiz (core) - Error: Failed to start plugin: ezoom compiz (core) - Info: Unloading plugin: ezoom compiz (core) - Info: Loading plugin: workarounds compiz (core) - Info: Starting plugin: workarounds compiz (core) - Error: Plugin 'opengl' not loaded. Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 compiz (core) - Info: Loading plugin: scale compiz (core) - Info: Starting plugin: scale compiz (core) - Error: Plugin 'opengl' not loaded. compiz (core) - Error: Plugin init failed: scale compiz (core) - Error: Failed to start plugin: scale compiz (core) - Info: Unloading plugin: scale Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Segmentation fault (core dumped)

    Read the article

  • sudo apt-get update errors

    - by Adrian Begi
    Here is what I get on my terminal when running sudo apt-get update errors. I dont know if the issue is from my sources.list or my proxy setup(have not made any changes to proxies). Thank you for any help in advanced. Ign http://security.ubuntu.com oneiric-security Release.gpg Ign http://security.ubuntu.com oneiric-security Release Ign http://security.ubuntu.com oneiric-security/main Sources/DiffIndex Ign http://security.ubuntu.com oneiric-security/restricted Sources/DiffIndex Ign http://security.ubuntu.com oneiric-security/universe Sources/DiffIndex Ign http://security.ubuntu.com oneiric-security/multiverse Sources/DiffIndex Ign http://security.ubuntu.com oneiric-security/main amd64 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/restricted amd64 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/universe amd64 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/multiverse amd64 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/main i386 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/restricted i386 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/universe i386 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/multiverse i386 Packages/DiffIndex Ign http://security.ubuntu.com oneiric-security/main TranslationIndex Ign http://security.ubuntu.com oneiric-security/multiverse TranslationIndex Ign http://security.ubuntu.com oneiric-security/restricted TranslationIndex Ign http://security.ubuntu.com oneiric-security/universe TranslationIndex Err http://security.ubuntu.com oneiric-security/main Sources 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/restricted Sources 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/universe Sources 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/multiverse Sources 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/main amd64 Packages 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/restricted amd64 Packages 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/universe amd64 Packages 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/multiverse amd64 Packages 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/main i386 Packages 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/restricted i386 Packages 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/universe i386 Packages 404 Not Found [IP: 91.189.91.15 80] Err http://security.ubuntu.com oneiric-security/multiverse i386 Packages 404 Not Found [IP: 91.189.91.15 80] Ign http://security.ubuntu.com oneiric-security/main Translation-en_US Ign http://security.ubuntu.com oneiric-security/main Translation-en Ign http://security.ubuntu.com oneiric-security/multiverse Translation-en_US Ign http://security.ubuntu.com oneiric-security/multiverse Translation-en Ign http://security.ubuntu.com oneiric-security/restricted Translation-en_US Ign http://security.ubuntu.com oneiric-security/restricted Translation-en Ign http://security.ubuntu.com oneiric-security/universe Translation-en_US Ign http://security.ubuntu.com oneiric-security/universe Translation-en W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/main/source/Sources 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/restricted/source/Sources 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/universe/source/Sources 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/multiverse/source/Sources 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/main/binary-amd64/Packages 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/restricted/binary-amd64/Packages 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/universe/binary-amd64/Packages 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/multiverse/binary-amd64/Packages 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/main/binary-i386/Packages 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/restricted/binary-i386/Packages 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/universe/binary-i386/Packages 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/oneiric-security/multiverse/binary-i386/Packages 404 Not Found [IP: 91.189.91.15 80] E: Some index files failed to download. They have been ignored, or old ones used instead. HERE IS MY SOURCES.LIST # # deb cdrom:[Ubuntu-Server 11.10 _Oneiric Ocelot_ - Release amd64 (20111011)]/ dists/oneiric/main/binary-i386/ # deb cdrom:[Ubuntu-Server 11.10 _Oneiric Ocelot_ - Release amd64 (20111011)]/ dists/oneiric/restricted/binary-i386/ # deb cdrom:[Ubuntu-Server 11.10 _Oneiric Ocelot_ - Release amd64 (20111011)]/ oneiric main restricted #deb cdrom:[Ubuntu-Server 11.10 _Oneiric Ocelot_ - Release amd64 (20111011)]/ dists/oneiric/main/binary-i386/ #deb cdrom:[Ubuntu-Server 11.10 _Oneiric Ocelot_ - Release amd64 (20111011)]/ dists/oneiric/restricted/binary-i386/ #deb cdrom:[Ubuntu-Server 11.10 _Oneiric Ocelot_ - Release amd64 (20111011)]/ oneiric main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://us.archive.ubuntu.com/ubuntu/ oneiric main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://us.archive.ubuntu.com/ubuntu/ oneiric-updates main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://us.archive.ubuntu.com/ubuntu/ oneiric universe deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric universe deb http://us.archive.ubuntu.com/ubuntu/ oneiric-updates universe deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://us.archive.ubuntu.com/ubuntu/ oneiric multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric multiverse deb http://us.archive.ubuntu.com/ubuntu/ oneiric-updates multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://us.archive.ubuntu.com/ubuntu/ oneiric-backports main restricted universe multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric-backports main restricted universe multiverse deb http://security.ubuntu.com/ubuntu oneiric-security main restricted deb-src http://security.ubuntu.com/ubuntu oneiric-security main restricted deb http://security.ubuntu.com/ubuntu oneiric-security universe deb-src http://security.ubuntu.com/ubuntu oneiric-security universe deb http://security.ubuntu.com/ubuntu oneiric-security multiverse deb-src http://security.ubuntu.com/ubuntu oneiric-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu oneiric partner # deb-src http://archive.canonical.com/ubuntu oneiric partner ## Uncomment the following two lines to add software from Ubuntu's ## 'extras' repository. ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # deb http://extras.ubuntu.com/ubuntu oneiric main # deb-src http://extras.ubuntu.com/ubuntu oneiric main

    Read the article

  • CodePlex Daily Summary for Friday, February 19, 2010

    CodePlex Daily Summary for Friday, February 19, 2010New ProjectsApplication Management Library: Application Management makes your application life easier. It will automatic do memory management, handle and log unhandled exceptions, profiling y...Audio Service - Play Wave Files From Windows Service: This is a windows service that Check a registry key, when the key is updated with a new wave file path the service plays the wave file.Aviamodels: 3d drawing AviamodelsControl of payment proofs program for Greek citizens: This is a program that is used for Greek citizens who want to keep track of their payment proofs.Cover Creator: Cover Creator gives you the possibility to create and print CD covers. Content of CD is taken from http://www.freedb.org/ or can be added/modyfied ...DevBoard: DevBoard is a webbased scrum tool that helps developers/team get a clear overview of the project progress. It's developed in C# and silverlight.Flex AdventureWorks: The is mostly a skunk-works application to help me get acclimated to CodePlex. The long term goal is to integrate a Flex UI with the AdventureWor...GRE Wordlist: An intuitive and customizable word list for GRE aspirants. Developed in Java using a word list similar to Barron's.Indexer: A desktop file Index and Search tool which allows you to choose a list of folders to index, and then search on later. It is based on Lucene.net an...Project Management Office (PMO) for SharePoint: Sample web part for the Code Mastery event in Boston, February 11, 2010.Restart SQL Audit Policy and Job: Resolve SQL 2008 Audit Network Connectivity Issue.Rounded Corners / DIV Container: The RoundedDiv round corners container is a skin-able, CSS compliant UI control. Select which corners should be rounded, collapse and expand the c...Silverlight Google Search Application: The Silverlight Google Search Application uses Google Search API and behaves like Internet Search Application with option to preview desired page i...Weather Forecast Control: MyWeather forecast control pulls up to date weather forecast information from The Weather Channel for your website.New ReleasesApplication Management Library: ApplicationManagement v1.0: First ReleaseAudio Service - Play Wave Files From Windows Service: Audio Service v1.0: This is a working version of the Audio Service. Please use as you need to.AutoMapper: 1.0.1 for Silverlight 3.0 Alpha: AutoMapper for Silverlight 3.0. Features not supported: IDataReader mapping IListSource mapping All other features are supported.Buzz Dot Net: Buzz Dot Net v.1.10219: Buzz Dot Net Library (Parser & Objects) + WPF Example (using MVVM & Threading)Canvas VSDOC Intellisense: V 1.0.0.0a: This release contains two JavaScript files: canvas-utils.js (can be referenced in both runtime and development environment) canvas-vsdoc.js (must ...Control of payment proofs program for Greek citizens: Payment Proofs: source codeCourier: Beta 2: Added Rx Framework support and re-factored how message registration and un-registration works Blog post explaining the updates and re-factoring c...Cover Creator: Initial release: This is initial stable release. For now only in Polish language.Employee Scheduler: Employee Scheduler 2.2: Small Bug found. Small total hour calculation bug. See http://employeescheduler.codeplex.com/WorkItem/View.aspx?WorkItemId=6059 Extract the files...EnhSim: Release v1.9.7.1: Release v1.9.7.1Implemented Dislodged Foreign Object trinket Whispering Fanged Skull now also procs off Flame shock dots You can toggle bloodlust o...Extend SmallBasic: Teaching Extensions v.007: added SimpleSquareTest added Tortoise.Approve() for virtual proctor how to use virtual proctor: change the path in the proctor.txt file (located i...FolderSize: FolderSize.Win32.1.0.1.0: FolderSize.Win32.1.0.1.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...GLB Virtual Player Builder: v0.4.0 Beta: Allows for user to import and use archetypes for building players. The archetypes are contained in the file "archetypes.xml". This file is editab...Google Map WebPart from SharePoint List: GMap Stable Release: GMap Stable ReleaseHenge3D Physics Library for XNA: Henge3D Source (2010-02 R2): Fixed a build error related to an assembly attribute in XBOX 360 builds. Tweaked the controls in the sample when targeting the 360. Reduced the...Indexer: Beta Release 1: Just the initial/rough cut.NukeCS: NukeCS 5.2.3 Source Code: update version to 5.2.3ODOS: ODOS STABLE 1.5.0: Thank you for your patience while we develop this version. Not that much has been added, though. Just doing some sub-conscious stuff to make life...PoshBoard: PoshBoard 3.0 Beta 1: Welcome to the first beta release of PoshBoard 3.0 ! IMPORTANT WARNING : this release is absolutly not feature complete and is error-prone. Okay, ...Restart SQL Audit Policy and Job: Restart SQL 2008 Audit Policy and Job: This folder contains three pieces of source code: Server Audit Status (Started).xml - Import this on-schedule policy into your server's Policy-Ba...SAL- Self Artificial Learning: Artificial Learning 2AQV Working Proof Of Concept: This is the Simulation proof of concept version that comes after the 1aq version. AQ stands for Anwering Questions.SharePoint 2010 Word Automation: SP 2010 Word Automation - Workflow Actions 1.1: This release includes two new custom workflow activities for SharePoint designer Convert Folder Convert Library More information about these new...SharePoint Outlook Connector: Version 1.0.1.1: Exception Logging has been improved.Sharpy: Sharpy 1.2 Alpha: This is the third Sharpy release. A change has been made to allow overriding the master page from the controller. The release contains the single ...Silverlight Google Search Application: SL Google Search App Alpha: This is just a first alpha version of the application, as it looks like when I uploaded it to CodePlex. The application works, requires Silverlight...Starter Kit Mytrip.Mvc.Entity: Mytrip.Mvc.Entity 1.0 RC: EF Membership UserManager FileManager Localization Captcha ClientValidation Theme CrossBrowser VS 2010 RC MVC 2 RC db MSSQL2008thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.6): This release is an update for WSCF.blue V1. Below are the bug fixes made since the V1.0.5 release: The data contract type filter was not including...TS3QueryLib.Net: TS3QueryLib.Net Version 0.18.13.0: Changelog Added overloads to all methods of QueryRunenr class handling permission tasks to allow passing of permission name instead of permissionid...Umbraco CMS: Umbraco 4.1 Beta 2: This is the second beta of Umbraco 4.1. Umbraco 4.1 is more advanced than ever, yet faster, lighter and simpler to use than ever. We, on behalf of...VCC: Latest build, v2.1.30218.0: Automatic drop of latest buildZack's Fiasco - Code Generated DAL: v1.2.4: Enhancements: SQL Server CRUD Stored Procedures added option for USE <db> added option to create or not create INSERT sprocs added option to cr...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Image Resizer Powertoy Clone for WindowsASP.NETMicrosoft SQL Server Community & SamplesDotNetNuke® Community EditionMost Active ProjectsRawrSharpyDinnerNow.netBlogEngine.NETjQuery Library for SharePoint Web ServicesNB_Store - Free DotNetNuke Ecommerce Catalog Modulepatterns & practices – Enterprise LibraryPHPExcelFacebook Developer ToolkitFluent Ribbon Control Suite

    Read the article

  • Compiling examples for consuming the REST Endpoints for WCF Service using Agatha

    - by REA_ANDREW
    I recently made two contributions to the Agatha Project by Davy Brion over on Google Code, and one of the things I wanted to follow up with was a post showing examples and some, seemingly required tid bits.  The contributions which I made where: To support StructureMap To include REST (JSON and XML) support for the service contract The examples which I have made, I want to format them so they fit in with the current format of examples over on Agatha and hopefully create and submit a third patch which will include these examples to help others who wish to use these additions. Whilst building these examples for both XML and JSON I have learnt a couple of things which I feel are not really well documented, but are extremely good practice and once known make perfect sense.  I have chosen a real basic e-commerce context for my example Requests and Responses, and have also made use of the excellent tool AutoMapper, again on Google Code. Setting the scene I have followed the Pipes and Filters Pattern with the IQueryable interface on my Repository and exposed the following methods to query Products: IQueryable<Product> GetProducts(); IQueryable<Product> ByCategoryName(this IQueryable<Product> products, string categoryName) Product ByProductCode(this IQueryable<Product> products, String productCode) I have an interface for the IProductRepository but for the concrete implementation I have simply created a protected getter which populates a private List<Product> with 100 test products with random data.  Another good reason for following an interface based approach is that it will demonstrate usage of my first contribution which is the StructureMap support.  Finally the two Domain Objects I have made are Product and Category as shown below: public class Product { public String ProductCode { get; set; } public String Name { get; set; } public Decimal Price { get; set; } public Decimal Rrp { get; set; } public Category Category { get; set; } }   public class Category { public String Name { get; set; } }   Requirements for the REST Support One of the things which you will notice with Agatha is that you do not have to decorate your Request and Response objects with the WCF Service Model Attributes like DataContract, DataMember etc… Unfortunately from what I have seen, these are required if you want the same types to work with your REST endpoint.  I have not tried but I assume the same result can be achieved by simply decorating the same classes with the Serializable Attribute.  Without this the operation will fail. Another surprising thing I have found is that it did not work until I used the following Attribute parameters: Name Namespace e.g. [DataContract(Name = "GetProductsRequest", Namespace = "AgathaRestExample.Service.Requests")] public class GetProductsRequest : Request { }   Although I was surprised by this, things kind of explained themselves when I got round to figuring out the exact construct required for both the XML and the REST.  One of the things which you already know and are then reminded of is that each of your Requests and Responses ultimately inherit from an abstract base class respectively. This information needs to be represented in a way native to the format being used.  I have seen this in XML but I have not seen the format which is required for the JSON. JSON Consumer Example I have used JQuery to create the example and I simply want to make two requests to the server which as you will know with Agatha are transmitted inside an array to reduce the service calls.  I have also used a tool called json2 which is again over at Google Code simply to convert my JSON expression into its string format for transmission.  You will notice that I specify the type of Request I am using and the relevant Namespace it belongs to.  Also notice that the second request has a parameter so each of these two object are representing an abstract Request and the parameters of the object describe it. <script type="text/javascript"> var bodyContent = $.ajax({ url: "http://localhost:50348/service.svc/json/processjsonrequests", global: false, contentType: "application/json; charset=utf-8", type: "POST", processData: true, data: JSON.stringify([ { __type: "GetProductsRequest:AgathaRestExample.Service.Requests" }, { __type: "GetProductsByCategoryRequest:AgathaRestExample.Service.Requests", CategoryName: "Category1" } ]), dataType: "json", success: function(msg) { alert(msg); } }).responseText; </script>   XML Consumer Example For the XML Consumer example I have chosen to use a simple Console Application and make a WebRequest to the service using the XML as a request.  I have made a crude static method which simply reads from an XML File, replaces some value with a parameter and returns the formatted XML.  I say crude but it simply shows how XML Templates for each type of Request could be made and then have a wrapper utility in whatever language you use to combine the requests which are required.  The following XML is the same Request array as shown above but simply in the XML Format. <?xml version="1.0" encoding="utf-8" ?> <ArrayOfRequest xmlns="http://schemas.datacontract.org/2004/07/Agatha.Common" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"> <Request i:type="a:GetProductsRequest" xmlns:a="AgathaRestExample.Service.Requests"/> <Request i:type="a:GetProductsByCategoryRequest" xmlns:a="AgathaRestExample.Service.Requests"> <a:CategoryName>{CategoryName}</a:CategoryName> </Request> </ArrayOfRequest>   It is funny because I remember submitting a question to StackOverflow asking whether there was a REST Client Generation tool similar to what Microsoft used for their RestStarterKit but which could be applied to existing services which have REST endpoints attached.  I could not find any but this is now definitely something which I am going to build, as I think it is extremely useful to have but also it should not be too difficult based on the information I now know about the above.  Finally I thought that the Strategy Pattern would lend itself really well to this type of thing so it can accommodate for different languages. I think that is about it, I have included the code for the example Console app which I made below incase anyone wants to have a mooch at the code.  As I said above I want to reformat these to fit in with the current examples over on the Agatha project, but also now thinking about it, make a Documentation Web method…{brain ticking} :-) Cheers for now and here is the final bit of code: static void Main(string[] args) { var request = WebRequest.Create("http://localhost:50348/service.svc/xml/processxmlrequests"); request.Method = "POST"; request.ContentType = "text/xml"; using(var writer = new StreamWriter(request.GetRequestStream())) { writer.WriteLine(GetExampleRequestsString("Category1")); } var response = request.GetResponse(); using(var reader = new StreamReader(response.GetResponseStream())) { Console.WriteLine(reader.ReadToEnd()); } Console.ReadLine(); } static string GetExampleRequestsString(string categoryName) { var data = File.ReadAllText(Path.Combine(Path.GetDirectoryName(Assembly.GetExecutingAssembly().Location), "ExampleRequests.xml")); data = data.Replace("{CategoryName}", categoryName); return data; } }

    Read the article

  • WatiN screenshot saver

    - by Brian Schroer
    In addition to my automated unit, system and integration tests for ASP.NET projects, I like to give my customers something pretty that they can look at and visually see that the web site is behaving properly. I use the Gallio test runner to produce a pretty HTML report, and WatiN (Web Application Testing In .NET) to test the UI and create screenshots. I have a couple of issues with WatiN’s “CaptureWebPageToFile” method, though: It blew up the first (and only) time I tried it, possibly because… It scrolls down to capture the entire web page (I tried it on a very long page), and I usually don’t need that Also, sometimes I don’t need a picture of the whole browser window - I just want a picture of the element that I'm testing (for example, proving that a button has the correct caption). I wrote a WatiN screenshot saver helper class with these methods: SaveBrowserWindowScreenshot(Watin.Core.IE ie)  / SaveBrowserWindowScreenshot(Watin.Core.Element element) saves a screenshot of the browser window SaveBrowserWindowScreenshotWithHighlight(Watin.Core.Element element) saves a screenshot of the browser window, with the specified element scrolled into view and highlighted SaveElementScreenshot(Watin.Core.Element element) saves a picture of only the specified element The element highlighting improves on the built-in WatiN method (which just gives the element a yellow background, and makes the element pretty much unreadable when you have a light foreground color) by adding the ability to specify a HighlightCssClassName that points to a style in your site’s stylesheet. This code is specifically for testing with Internet Explorer (‘cause that’s what I have to test with at work), but you’re welcome to take it and do with it what you want… using System; using System.Drawing; using System.Drawing.Imaging; using System.IO; using System.Reflection; using System.Runtime.InteropServices; using System.Text; using System.Threading; using SHDocVw; using WatiN.Core; using mshtml; namespace BrianSchroer.TestHelpers { public static class WatinScreenshotSaver { public static void SaveBrowserWindowScreenshotWithHighlight (Element element, string screenshotName) { HighlightElement(element, true); SaveBrowserWindowScreenshot(element, screenshotName); HighlightElement(element, false); } public static void SaveBrowserWindowScreenshotWithHighlight(Element element) { HighlightElement(element, true); SaveBrowserWindowScreenshot(element); HighlightElement(element, false); } public static void SaveBrowserWindowScreenshot(Element element, string screenshotName) { SaveScreenshot(GetIe(element), screenshotName, SaveBitmapForCallbackArgs); } public static void SaveBrowserWindowScreenshot(Element element) { SaveScreenshot(GetIe(element), null, SaveBitmapForCallbackArgs); } public static void SaveBrowserWindowScreenshot(IE ie, string screenshotName) { SaveScreenshot(ie, screenshotName, SaveBitmapForCallbackArgs); } public static void SaveBrowserWindowScreenshot(IE ie) { SaveScreenshot(ie, null, SaveBitmapForCallbackArgs); } public static void SaveElementScreenshot(Element element, string screenshotName) { // TODO: Figure out how to get browser window "chrome" size and not have to go to full screen: var iex = (InternetExplorerClass) GetIe(element).InternetExplorer; bool fullScreen = iex.FullScreen; if (!fullScreen) iex.FullScreen = true; ScrollIntoView(element); SaveScreenshot(GetIe(element), screenshotName, args => SaveElementBitmapForCallbackArgs(element, args)); iex.FullScreen = fullScreen; } public static void SaveElementScreenshot(Element element) { SaveElementScreenshot(element, null); } private static void SaveScreenshot(IE browser, string screenshotName, Action<ScreenshotCallbackArgs> screenshotCallback) { string fileName = string.Format("{0:000}{1}{2}.jpg", ++_screenshotCount, (string.IsNullOrEmpty(screenshotName)) ? "" : " ", screenshotName); string path = Path.Combine(ScreenshotDirectoryName, fileName); Console.WriteLine(); // Gallio HTML-encodes the following display, but I have a utility program to // remove the "HTML===" and "===HTML" and un-encode the rest to show images in the Gallio report: Console.WriteLine("HTML===<div><b>{0}:</br></b><img src=\"{1}\" /></div>===HTML", screenshotName, new Uri(path).AbsoluteUri); MakeBrowserWindowTopmost(browser); try { var args = new ScreenshotCallbackArgs { InternetExplorerClass = (InternetExplorerClass)browser.InternetExplorer, ScreenshotPath = path }; Thread.Sleep(100); screenshotCallback(args); } catch (Exception ex) { Console.WriteLine(ex.Message); } } public static void HighlightElement(Element element, bool doHighlight) { if (!element.Exists) return; if (string.IsNullOrEmpty(HighlightCssClassName)) { element.Highlight(doHighlight); return; } string jsRef = element.GetJavascriptElementReference(); if (string.IsNullOrEmpty(jsRef)) return; var sb = new StringBuilder("try { "); sb.AppendFormat(" {0}.scrollIntoView(false);", jsRef); string format = (doHighlight) ? "{0}.className += ' {1}'" : "{0}.className = {0}.className.replace(' {1}', '')"; sb.AppendFormat(" " + format + ";", jsRef, HighlightCssClassName); sb.Append("} catch(e) {}"); string script = sb.ToString(); GetIe(element).RunScript(script); } public static void ScrollIntoView(Element element) { string jsRef = element.GetJavascriptElementReference(); if (string.IsNullOrEmpty(jsRef)) return; var sb = new StringBuilder("try { "); sb.AppendFormat(" {0}.scrollIntoView(false);", jsRef); sb.Append("} catch(e) {}"); string script = sb.ToString(); GetIe(element).RunScript(script); } public static void MakeBrowserWindowTopmost(IE ie) { ie.BringToFront(); SetWindowPos(ie.hWnd, HWND_TOPMOST, 0, 0, 0, 0, TOPMOST_FLAGS); } public static string HighlightCssClassName { get; set; } private static int _screenshotCount; private static string _screenshotDirectoryName; public static string ScreenshotDirectoryName { get { if (_screenshotDirectoryName == null) { var asm = Assembly.GetAssembly(typeof(WatinScreenshotSaver)); var uri = new Uri(asm.CodeBase); var fileInfo = new FileInfo(uri.LocalPath); string directoryName = fileInfo.DirectoryName; _screenshotDirectoryName = Path.Combine( directoryName, string.Format("Screenshots_{0:yyyyMMddHHmm}", DateTime.Now)); Console.WriteLine("Screenshot folder: {0}", _screenshotDirectoryName); Directory.CreateDirectory(_screenshotDirectoryName); } return _screenshotDirectoryName; } set { _screenshotDirectoryName = value; _screenshotCount = 0; } } [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags); private static readonly IntPtr HWND_TOPMOST = new IntPtr(-1); private const UInt32 SWP_NOSIZE = 0x0001; private const UInt32 SWP_NOMOVE = 0x0002; private const UInt32 TOPMOST_FLAGS = SWP_NOMOVE | SWP_NOSIZE; private static IE GetIe(Element element) { if (element == null) return null; var container = element.DomContainer; while (container as IE == null) container = container.DomContainer; return (IE)container; } private static void SaveBitmapForCallbackArgs(ScreenshotCallbackArgs args) { InternetExplorerClass iex = args.InternetExplorerClass; SaveBitmap(args.ScreenshotPath, iex.Left, iex.Top, iex.Width, iex.Height); } private static void SaveElementBitmapForCallbackArgs(Element element, ScreenshotCallbackArgs args) { InternetExplorerClass iex = args.InternetExplorerClass; Rectangle bounds = GetElementBounds(element); SaveBitmap(args.ScreenshotPath, iex.Left + bounds.Left, iex.Top + bounds.Top, bounds.Width, bounds.Height); } /// <summary> /// This method is used instead of element.NativeElement.GetElementBounds because that /// method has a bug (http://sourceforge.net/tracker/?func=detail&aid=2994660&group_id=167632&atid=843727). /// </summary> private static Rectangle GetElementBounds(Element element) { var ieElem = element.NativeElement as WatiN.Core.Native.InternetExplorer.IEElement; IHTMLElement elem = ieElem.AsHtmlElement; int left = elem.offsetLeft; int top = elem.offsetTop; for (IHTMLElement parent = elem.offsetParent; parent != null; parent = parent.offsetParent) { left += parent.offsetLeft; top += parent.offsetTop; } return new Rectangle(left, top, elem.offsetWidth, elem.offsetHeight); } private static void SaveBitmap(string path, int left, int top, int width, int height) { using (var bitmap = new Bitmap(width, height)) { using (Graphics g = Graphics.FromImage(bitmap)) { g.CopyFromScreen( new Point(left, top), Point.Empty, new Size(width, height) ); } bitmap.Save(path, ImageFormat.Jpeg); } } private class ScreenshotCallbackArgs { public InternetExplorerClass InternetExplorerClass { get; set; } public string ScreenshotPath { get; set; } } } }

    Read the article

  • Reporting Services - It's a Wrap!

    - by smisner
    If you have any experience at all with Reporting Services, you have probably developed a report using the matrix data region. It's handy when you want to generate columns dynamically based on data. If users view a matrix report online, they can scroll horizontally to view all columns and all is well. But if they want to print the report, the experience is completely different and you'll have to decide how you want to handle dynamic columns. By default, when a user prints a matrix report for which the number of columns exceeds the width of the page, Reporting Services determines how many columns can fit on the page and renders one or more separate pages for the additional columns. In this post, I'll explain two techniques for managing dynamic columns. First, I'll show how to use the RepeatRowHeaders property to make it easier to read a report when columns span multiple pages, and then I'll show you how to "wrap" columns so that you can avoid the horizontal page break. Included with this post are the sample RDLs for download. First, let's look at the default behavior of a matrix. A matrix that has too many columns for one printed page (or output to page-based renderer like PDF or Word) will be rendered such that the first page with the row group headers and the inital set of columns, as shown in Figure 1. The second page continues by rendering the next set of columns that can fit on the page, as shown in Figure 2.This pattern continues until all columns are rendered. The problem with the default behavior is that you've lost the context of employee and sales order - the row headers - on the second page. That makes it hard for users to read this report because the layout requires them to flip back and forth between the current page and the first page of the report. You can fix this behavior by finding the RepeatRowHeaders of the tablix report item and changing its value to True. The second (and subsequent pages) of the matrix now look like the image shown in Figure 3. The problem with this approach is that the number of printed pages to flip through is unpredictable when you have a large number of potential columns. What if you want to include all columns on the same page? You can take advantage of the repeating behavior of a tablix and get repeating columns by embedding one tablix inside of another. For this example, I'm using SQL Server 2008 R2 Reporting Services. You can get similar results with SQL Server 2008. (In fact, you could probably do something similar in SQL Server 2005, but I haven't tested it. The steps would be slightly different because you would be working with the old-style matrix as compared to the new-style tablix discussed in this post.) I created a dataset that queries AdventureWorksDW2008 tables: SELECT TOP (100) e.LastName + ', ' + e.FirstName AS EmployeeName, d.FullDateAlternateKey, f.SalesOrderNumber, p.EnglishProductName, sum(SalesAmount) as SalesAmount FROM FactResellerSales AS f INNER JOIN DimProduct AS p ON p.ProductKey = f.ProductKey INNER JOIN DimDate AS d ON d.DateKey = f.OrderDateKey INNER JOIN DimEmployee AS e ON e.EmployeeKey = f.EmployeeKey GROUP BY p.EnglishProductName, d.FullDateAlternateKey, e.LastName + ', ' + e.FirstName, f.SalesOrderNumber ORDER BY EmployeeName, f.SalesOrderNumber, p.EnglishProductName To start the report: Add a matrix to the report body and drag Employee Name to the row header, which also creates a group. Next drag SalesOrderNumber below Employee Name in the Row Groups panel, which creates a second group and a second column in the row header section of the matrix, as shown in Figure 4. Now for some trickiness. Add another column to the row headers. This new column will be associated with the existing EmployeeName group rather than causing BIDS to create a new group. To do this, right-click on the EmployeeName textbox in the bottom row, point to Insert Column, and then click Inside Group-Right. Then add the SalesOrderNumber field to this new column. By doing this, you're creating a report that repeats a set of columns for each EmployeeName/SalesOrderNumber combination that appears in the data. Next, modify the first row group's expression to group on both EmployeeName and SalesOrderNumber. In the Row Groups section, right-click EmployeeName, click Group Properties, click the Add button, and select [SalesOrderNumber]. Now you need to configure the columns to repeat. Rather than use the Columns group of the matrix like you might expect, you're going to use the textbox that belongs to the second group of the tablix as a location for embedding other report items. First, clear out the text that's currently in the third column - SalesOrderNumber - because it's already added as a separate textbox in this report design. Then drag and drop a matrix into that textbox, as shown in Figure 5. Again, you need to do some tricks here to get the appearance and behavior right. We don't really want repeating rows in the embedded matrix, so follow these steps: Click on the Rows label which then displays RowGroup in the Row Groups pane below the report body. Right-click on RowGroup,click Delete Group, and select the option to delete associated rows and columns. As a result, you get a modified matrix which has only a ColumnGroup in it, with a row above a double-dashed line for the column group and a row below the line for the aggregated data. Let's continue: Drag EnglishProductName to the data textbox (below the line). Add a second data row by right-clicking EnglishProductName, pointing to Insert Row, and clicking Below. Add the SalesAmount field to the new data textbox. Now eliminate the column group row without eliminating the group. To do this, right-click the row above the double-dashed line, click Delete Rows, and then select Delete Rows Only in the message box. Now you're ready for the fit and finish phase: Resize the column containing the embedded matrix so that it fits completely. Also, the final column in the matrix is for the column group. You can't delete this column, but you can make it as small as possible. Just click on the matrix to display the row and column handles, and then drag the right edge of the rightmost column to the left to make the column virtually disappear. Next, configure the groups so that the columns of the embedded matrix will wrap. In the Column Groups pane, right-click ColumnGroup1 and click on the expression button (labeled fx) to the right of Group On [EnglishProductName]. Replace the expression with the following: =RowNumber("SalesOrderNumber" ). We use SalesOrderNumber here because that is the name of the group that "contains" the embedded matrix. The next step is to configure the number of columns to display before wrapping. Click any cell in the matrix that is not inside the embedded matrix, and then double-click the second group in the Row Groups pane - SalesOrderNumber. Change the group expression to the following expression: =Ceiling(RowNumber("EmployeeName")/3) The last step is to apply formatting. In my example, I set the SalesAmount textbox's Format property to C2 and also right-aligned the text in both the EnglishProductName and the SalesAmount textboxes. And voila - Figure 6 shows a matrix report with wrapping columns. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Enterprise Library Logging / Exception handling and Postsharp

    - by subodhnpushpak
    One of my colleagues came-up with a unique situation where it was required to create log files based on the input file which is uploaded. For example if A.xml is uploaded, the corresponding log file should be A_log.txt. I am a strong believer that Logging / EH / caching are cross-cutting architecture aspects and should be least invasive to the business-logic written in enterprise application. I have been using Enterprise Library for logging / EH (i use to work with Avanade, so i have affection towards the library!! :D ). I have been also using excellent library called PostSharp for cross cutting aspect. Here i present a solution with and without PostSharp all in a unit test. Please see full source code at end of the this blog post. But first, we need to tweak the enterprise library so that the log files are created at runtime based on input given. Below is Custom trace listner which writes log into a given file extracted out of Logentry extendedProperties property. using Microsoft.Practices.EnterpriseLibrary.Common.Configuration; using Microsoft.Practices.EnterpriseLibrary.Logging.Configuration; using Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners; using Microsoft.Practices.EnterpriseLibrary.Logging; using System.IO; using System.Text; using System; using System.Diagnostics;   namespace Subodh.Framework.Logging { [ConfigurationElementType(typeof(CustomTraceListenerData))] public class LogToFileTraceListener : CustomTraceListener {   private static object syncRoot = new object();   public override void TraceData(TraceEventCache eventCache, string source, TraceEventType eventType, int id, object data) {   if ((data is LogEntry) & this.Formatter != null) { WriteOutToLog(this.Formatter.Format((LogEntry)data), (LogEntry)data); } else { WriteOutToLog(data.ToString(), (LogEntry)data); } }   public override void Write(string message) { Debug.Print(message.ToString()); }   public override void WriteLine(string message) { Debug.Print(message.ToString()); }   private void WriteOutToLog(string BodyText, LogEntry logentry) { try { //Get the filelocation from the extended properties if (logentry.ExtendedProperties.ContainsKey("filelocation")) { string fullPath = Path.GetFullPath(logentry.ExtendedProperties["filelocation"].ToString());   //Create the directory where the log file is written to if it does not exist. DirectoryInfo directoryInfo = new DirectoryInfo(Path.GetDirectoryName(fullPath));   if (directoryInfo.Exists == false) { directoryInfo.Create(); }   //Lock the file to prevent another process from using this file //as data is being written to it.   lock (syncRoot) { using (FileStream fs = new FileStream(fullPath, FileMode.Append, FileAccess.Write, FileShare.Write, 4096, true)) { using (StreamWriter sw = new StreamWriter(fs, Encoding.UTF8)) { Log(BodyText, sw); sw.Close(); } fs.Close(); } } } } catch (Exception ex) { throw new LoggingException(ex.Message, ex); } }   /// <summary> /// Write message to named file /// </summary> public static void Log(string logMessage, TextWriter w) { w.WriteLine("{0}", logMessage); } } }   The above can be “plugged into” the code using below configuration <loggingConfiguration name="Logging Application Block" tracingEnabled="true" defaultCategory="Trace" logWarningsWhenNoCategoriesMatch="true"> <listeners> <add listenerDataType="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.CustomTraceListenerData, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" traceOutputOptions="None" filter="All" type="Subodh.Framework.Logging.LogToFileTraceListener, Subodh.Framework.Logging, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" name="Subodh Custom Trace Listener" initializeData="" formatter="Text Formatter" /> </listeners> Similarly we can use PostSharp to expose the above as cross cutting aspects as below using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Reflection; using PostSharp.Laos; using System.Diagnostics; using GC.FrameworkServices.ExceptionHandler; using Subodh.Framework.Logging;   namespace Subodh.Framework.ExceptionHandling { [Serializable] public sealed class LogExceptionAttribute : OnExceptionAspect { private string prefix; private MethodFormatStrings formatStrings;   // This field is not serialized. It is used only at compile time. [NonSerialized] private readonly Type exceptionType; private string fileName;   /// <summary> /// Declares a <see cref="XTraceExceptionAttribute"/> custom attribute /// that logs every exception flowing out of the methods to which /// the custom attribute is applied. /// </summary> public LogExceptionAttribute() { }   /// <summary> /// Declares a <see cref="XTraceExceptionAttribute"/> custom attribute /// that logs every exception derived from a given <see cref="Type"/> /// flowing out of the methods to which /// the custom attribute is applied. /// </summary> /// <param name="exceptionType"></param> public LogExceptionAttribute( Type exceptionType ) { this.exceptionType = exceptionType; }   public LogExceptionAttribute(Type exceptionType, string fileName) { this.exceptionType = exceptionType; this.fileName = fileName; }   /// <summary> /// Gets or sets the prefix string, printed before every trace message. /// </summary> /// <value> /// For instance <c>[Exception]</c>. /// </value> public string Prefix { get { return this.prefix; } set { this.prefix = value; } }   /// <summary> /// Initializes the current object. Called at compile time by PostSharp. /// </summary> /// <param name="method">Method to which the current instance is /// associated.</param> public override void CompileTimeInitialize( MethodBase method ) { // We just initialize our fields. They will be serialized at compile-time // and deserialized at runtime. this.formatStrings = Formatter.GetMethodFormatStrings( method ); this.prefix = Formatter.NormalizePrefix( this.prefix ); }   public override Type GetExceptionType( MethodBase method ) { return this.exceptionType; }   /// <summary> /// Method executed when an exception occurs in the methods to which the current /// custom attribute has been applied. We just write a record to the tracing /// subsystem. /// </summary> /// <param name="context">Event arguments specifying which method /// is being called and with which parameters.</param> public override void OnException( MethodExecutionEventArgs context ) { string message = String.Format("{0}Exception {1} {{{2}}} in {{{3}}}. \r\n\r\nStack Trace {4}", this.prefix, context.Exception.GetType().Name, context.Exception.Message, this.formatStrings.Format(context.Instance, context.Method, context.GetReadOnlyArgumentArray()), context.Exception.StackTrace); if(!string.IsNullOrEmpty(fileName)) { ApplicationLogger.LogException(message, fileName); } else { ApplicationLogger.LogException(message, Source.UtilityService); } } } } To use the above below is the unit test [TestMethod] [ExpectedException(typeof(NotImplementedException))] public void TestMethod1() { MethodThrowingExceptionForLog(); try { MethodThrowingExceptionForLogWithPostSharp(); } catch (NotImplementedException ex) { throw ex; } }   private void MethodThrowingExceptionForLog() { try { throw new NotImplementedException(); } catch (NotImplementedException ex) { // create file and then write log ApplicationLogger.TraceMessage("this is a trace message which will be logged in Test1MyFile", @"D:\EL\Test1Myfile.txt"); ApplicationLogger.TraceMessage("this is a trace message which will be logged in YetAnotherTest1Myfile", @"D:\EL\YetAnotherTest1Myfile.txt"); } }   // Automatically log details using attributes // Log exception using attributes .... A La WCF [FaultContract(typeof(FaultMessage))] style] [Log(@"D:\EL\Test1MyfileLogPostsharp.txt")] [LogException(typeof(NotImplementedException), @"D:\EL\Test1MyfileExceptionPostsharp.txt")] private void MethodThrowingExceptionForLogWithPostSharp() { throw new NotImplementedException(); } The good thing about the approach is that all the logging and EH is done at centralized location controlled by PostSharp. Of Course, if some other library has to be used instead of EL, it can easily be plugged in. Also, the coder ARE ONLY involved in writing business code in methods, which makes code cleaner. Here is the full source code. The third party assemblies provided are from EL and PostSharp and i presume you will find these useful. Do let me know your thoughts / ideas on the same. Technorati Tags: PostSharp,Enterprize library,C#,Logging,Exception handling

    Read the article

< Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >