Search Results

Search found 1309 results on 53 pages for 'amd athlon'.

Page 41/53 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • Ubuntu 11.10 won't boot on Dell XPS 8300

    - by Phil Gorman
    I have a brand new Dell Studio XPS 8300 desktop with 17-2600 cpu, H67 chipset, 8GB DDR3, 2 1TB HDDs in mirrored RAID, and AMD Radeon 6770. Dell doesn't support Ubuntu here in Australia so it came with Windows 7 and Windows software. Yes I had to pay for an O.S. and software I didn't want to get hardware I did want, all at a greatly inflated price. It's not all beer and skittles in the land of Oz. I changed boot priorities in the BIOS to DVD and ran Ubuntu 11.10 64bit from the ISO with NOMODESET. The installation reformatted all partitions to rid me of the dreaded Windows. All was well until until reboot. The BIOS does its thing, then its "The Black Screen of Death" with a blinking cursor; no boot screen, no Grub, no keyboard, no mouse. I've searched Dell and Ubuntu forums in vain. Can you help? I would be really grateful for any advice which can help turn my big expensive paperweight into a really useful machine. Thank you in anticipation kind people. Phil

    Read the article

  • Installer doesn't display partition I want to install to

    - by Aditya
    While performing a Ubuntu 10.10 installation on my laptop, it doesn't show partitions pertaining to the PC. My PC configuration is as follows : HP Pavilion dv6 - 2020AX AMD Turion II Dual Core Mobile Processor M500 4 GB RAM OS Installed : Windows 7 500 GB Hard drive partitioned as follows : C : 227 GB (Free : 142 GB) D : 11.9 GB (Free : 1.98 GB) - Recovery F : 174 GB (Free : 18 GB) G : 50.5 GB (Free : 50.4 GB) So, I want to perform a Dual-boot installation on my PC, so that Ubuntu resides in the free disk space G:. Therefore, I started the Ubuntu 10.10 installation and select the manual partitioning feature in the installation. However, in the 'Allocate Drive Space' section of the installation, following partitions information is displayed: Partition Type Size Used /dev/sda /dev/sda1      1 MB    unknown /dev/sda2    ntfs    208 MB   unknown /dev/sda3   ntfs    244813 MB    168540 MB /dev/sda4    ntfs    255083 MB   3221 MB where /dev/sda - 500 GB So, what exactly is the problem? What is it should I do to install Ubuntu 10.10 in the G: disk space? Why are the partitions not being shown as the way they should be? Any Suggestions. Thank you for the help.

    Read the article

  • Ubuntu 12.04 OpenCL with Intel and Radeon?

    - by Steve
    I want to setup my Ubuntu 12.04 with OpenCL(Open Computing Language) support for i7 2600k and Radeon HD5870. My Monitor is connected to the integrated Graphics of the i7. Intel OpenCL SDK is installed and working. Iteration of avaliable OpenCL devices shows 2 entries for Intel. As recommended I installed AMD APP SDK 2.6 first and then the fglrx driver. I installed fglrx from Ubuntu repositories. This works fine till here. When I run aticonfig --inital -f and restart the system I get into trouble. Xorg starts only in low-graphics mode. cat /var/log/Xorg.0.log [ 21.201] X.Org X Server 1.12.2 Release Date: 2012-05-29 [ 21.201] X Protocol Version 11, Revision 0 [ 21.201] Build Operating System: Linux 2.6.24-29-xen x86_64 Ubuntu [ 21.201] Current Operating System: Linux chimera 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_ [ 21.201] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=c137757b-486b-4514-9dfe-00c97662 [ 21.201] Build Date: 05 June 2012 08:35:55AM [ 21.201] xorg-server 2:1.12.2+git20120605+server-1.12-branch.aaf48906-0ubuntu0ricotz~precise (For technical suppor [ 21.201] Current version of pixman: 0.26.0 [ 21.201] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 21.201] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 21.201] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 14:22:36 2012 [ 21.247] (==) Using config file: "/etc/X11/xorg.conf" [ 21.247] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 21.450] (==) ServerLayout "aticonfig Layout" [ 21.450] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 21.450] (**) | |-->Monitor "aticonfig-Monitor[0]-0" [ 21.451] (**) | |-->Device "aticonfig-Device[0]-0" [ 21.451] (==) Automatically adding devices [ 21.451] (==) Automatically enabling devices [ 21.466] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.473] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 21.473] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib [ 21.473] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 21.473] (II) Loader magic: 0x7f0ad3b9ab00 [ 21.473] (II) Module ABI versions: [ 21.473] X.Org ANSI C Emulation: 0.4 [ 21.473] X.Org Video Driver: 12.0 [ 21.473] X.Org XInput driver : 16.0 [ 21.473] X.Org Server Extension : 6.0 [ 21.473] (--) PCI:*(0:0:2:0) 8086:0122:1458:d000 rev 9, Mem @ 0xfb800000/4194304, 0xe0000000/268435456, I/O @ 0x00 [ 21.473] (--) PCI: (0:1:0:0) 1002:6898:1787:2289 rev 0, Mem @ 0xd0000000/268435456, 0xfbdc0000/131072, I/O @ 0x000 [ 21.473] (II) Open ACPI successful (/var/run/acpid.socket) [ 21.473] (II) "extmod" will be loaded by default. [ 21.473] (II) "dbe" will be loaded by default. [ 21.473] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 21.473] (II) "record" will be loaded by default. [ 21.473] (II) "dri" will be loaded by default. [ 21.473] (II) "dri2" will be loaded by default. [ 21.473] (II) LoadModule: "glx" [ 21.732] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libgl [ 21.934] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 21.934] compiled for 6.9.0, module version = 1.0.0 [ 21.934] (II) Loading extension GLX [ 21.934] (II) LoadModule: "extmod" [ 22.028] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 22.041] (II) Module extmod: vendor="X.Org Foundation" [ 22.041] compiled for 1.12.2, module version = 1.0.0 [ 22.041] Module class: X.Org Server Extension [ 22.041] ABI class: X.Org Server Extension, version 6.0 [ 22.041] (II) Loading extension MIT-SCREEN-SAVER [ 22.041] (II) Loading extension XFree86-VidModeExtension [ 22.041] (II) Loading extension XFree86-DGA [ 22.041] (II) Loading extension DPMS [ 22.041] (II) Loading extension XVideo [ 22.041] (II) Loading extension XVideo-MotionCompensation [ 22.041] (II) Loading extension X-Resource [ 22.041] (II) LoadModule: "dbe" [ 22.041] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 22.066] (II) Module dbe: vendor="X.Org Foundation" [ 22.066] compiled for 1.12.2, module version = 1.0.0 [ 22.066] Module class: X.Org Server Extension [ 22.066] ABI class: X.Org Server Extension, version 6.0 [ 22.066] (II) Loading extension DOUBLE-BUFFER [ 22.066] (II) LoadModule: "record" [ 22.066] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 22.077] (II) Module record: vendor="X.Org Foundation" [ 22.077] compiled for 1.12.2, module version = 1.13.0 [ 22.077] Module class: X.Org Server Extension [ 22.077] ABI class: X.Org Server Extension, version 6.0 [ 22.077] (II) Loading extension RECORD [ 22.077] (II) LoadModule: "dri" [ 22.077] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 22.082] (II) Module dri: vendor="X.Org Foundation" [ 22.082] compiled for 1.12.2, module version = 1.0.0 [ 22.082] ABI class: X.Org Server Extension, version 6.0 [ 22.082] (II) Loading extension XFree86-DRI [ 22.082] (II) LoadModule: "dri2" [ 22.082] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 22.083] (II) Module dri2: vendor="X.Org Foundation" [ 22.083] compiled for 1.12.2, module version = 1.2.0 [ 22.083] ABI class: X.Org Server Extension, version 6.0 [ 22.083] (II) Loading extension DRI2 [ 22.083] (II) LoadModule: "fglrx" [ 22.083] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_dr [ 22.399] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 22.399] compiled for 1.4.99.906, module version = 8.96.4 [ 22.399] Module class: X.Org Video Driver [ 22.399] (II) Loading sub module "fglrxdrm" [ 22.399] (II) LoadModule: "fglrxdrm" [ 22.399] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdr [ 22.445] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 22.445] compiled for 1.4.99.906, module version = 8.96.4 [ 22.445] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4 [ 22.445] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7 [ 22.445] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50 [ 22.445] (++) using VT number 7 [ 22.445] (WW) Falling back to old probe method for fglrx [ 23.043] (II) Loading PCS database from /etc/ati/amdpcsdb [ 23.082] (--) Chipset Supported AMD Graphics Processor (0x6898) found [ 23.107] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 23.107] (II) fglrx: intel VGA device detected, load intel driver. [ 23.107] (II) LoadModule: "intel" [ 23.211] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 23.475] (II) Module intel: vendor="X.Org Foundation" [ 23.475] compiled for 1.12.2, module version = 2.19.0 [ 23.475] Module class: X.Org Video Driver [ 23.475] ABI class: X.Org Video Driver, version 12.0 [ 23.476] ukiDynamicMajor: found major device number 249 [ 23.476] ukiDynamicMajor: found major device number 249 [ 23.476] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 23.476] ukiOpenDevice: node name is /dev/ati/card0 [ 23.476] ukiOpenDevice: open result is 8, (OK) [ 23.476] ukiOpenByBusid: ukiOpenMinor returns 8 [ 23.476] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 23.540] (WW) PowerXpress feature is not supported [ 23.540] (EE) No devices detected. [ 23.540] (==) Matched intel as autoconfigured driver 0 [ 23.540] (==) Matched vesa as autoconfigured driver 1 [ 23.540] (==) Matched fbdev as autoconfigured driver 2 [ 23.540] (==) Assigned the driver to the xf86ConfigLayout [ 23.540] (II) LoadModule: "intel" [ 23.540] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 23.540] (II) Module intel: vendor="X.Org Foundation" [ 23.540] compiled for 1.12.2, module version = 2.19.0 [ 23.540] Module class: X.Org Video Driver [ 23.540] ABI class: X.Org Video Driver, version 12.0 [ 23.540] (II) UnloadModule: "intel" [ 23.540] (II) Unloading intel [ 23.540] (II) Failed to load module "intel" (already loaded, 32522) [ 23.540] (II) LoadModule: "vesa" [ 23.583] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 23.620] (II) Module vesa: vendor="X.Org Foundation" [ 23.620] compiled for 1.12.2, module version = 2.3.1 [ 23.620] Module class: X.Org Video Driver [ 23.620] ABI class: X.Org Video Driver, version 12.0 [ 23.620] (II) LoadModule: "fbdev" [ 23.620] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 23.661] (II) Module fbdev: vendor="X.Org Foundation" [ 23.661] compiled for 1.12.2, module version = 0.4.2 [ 23.661] Module class: X.Org Video Driver [ 23.661] ABI class: X.Org Video Driver, version 12.0 [ 23.661] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4 [ 23.661] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7 [ 23.661] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50 [ 23.661] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2) [ 23.661] (II) VESA: driver for VESA chipsets: vesa [ 23.661] (II) FBDEV: driver for framebuffer: fbdev [ 23.661] (++) using VT number 7 [ 23.661] (WW) xf86OpenConsole: setpgid failed: Operation not permitted [ 23.661] (WW) xf86OpenConsole: setsid failed: Operation not permitted [ 23.661] (WW) Falling back to old probe method for fglrx [ 23.661] (II) Loading PCS database from /etc/ati/amdpcsdb [ 23.661] (WW) Falling back to old probe method for vesa [ 23.661] (WW) Falling back to old probe method for fbdev [ 23.661] (EE) No devices detected. [ 23.661] Fatal server error: [ 23.661] no screens found [ 23.661] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 23.661] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 23.661] xorg.conf: cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Is there a way to get the Radeon to work in a hybrid configuration or to use the Radeon as an OpenCL only device?

    Read the article

  • Restart problem after installing graphical card driver

    - by Tim
    My laptop is Lenovo T400, running Ubuntu 10.10. My problem: I just run jockey-gtk and installed ATI/AMD proprietary FGLRX graphics driver. But after reboot, there is a short period of graphical "Ubuntu" and then instead of starting X-window it completely changed to command line to ask me to login. Even after login and then issuing xinit, it still failed to start X. To solve this problem: I followed this post, where one person suggested to you can simply write sudo apt-get remove fglrx This worked for me. If it doesn't work, then try sudo apt-get remove xorg-driver-fglrx and restart. I actually don't need the driver anyway, so I issued the first command after login under command line. But after reboot, the situation is even worse, and there is now even no command-line interface to ask me login, instead the screen is completely blank with just some ambient light in the background and Ubuntu is hanging there probably forever. So I have no chance to try the second command the person suggested. I was wondering what I can do now to solve my problem? Thanks and regards!

    Read the article

  • Why do the order of uniforms gets changed by the compiler?

    - by Aybe
    I have the following shader, everything works fine when setting the value of one of the matrices but I've discovered that getting a value back is incorrect for View and Projection, they are in reverse order. #version 430 precision highp float; layout (location = 0) uniform mat4 Model; layout (location = 1) uniform mat4 View; layout (location = 2) uniform mat4 Projection; layout (location = 0) in vec3 in_position; layout (location = 1) in vec4 in_color; out vec4 out_color; void main(void) { gl_Position = Projection * View * Model * vec4(in_position, 1.0); out_color = in_color; } When querying their location they are effectively reversed, I did a small test by renaming View to Piew which puts it before Projection if sorted alphabetically and the order is correct. Now if I do remove layout (location = ...) from the uniforms, the problem disappears !? I am starting to think that this is a driver bug as explained in the wiki. Do you know why the order of the uniforms is changed whenever the shader is compiled ? (using an AMD HD7850)

    Read the article

  • Setting up Beats audio on HP Pavilion m6

    - by Joel Auterson
    I have an HP Pavilion m6-1054sa laptop, with a Beats subwoofer on the bottom. The normal laptop speakers work fine under Ubuntu but the Beats speaker(s?) does not. Anyone know how to get this working? Here's my lspci output, if it helps... 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series] (rev ff) 07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01) 07:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 0a) 08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)

    Read the article

  • Radeon HD 6850 VMware 3D Support?

    - by Matt
    I'm a new Ubuntu user (new to all of linux actually). I've installed Ubuntu 11.10 x64 and have been enjoying it, but I wanted to see how it would perform using VMware for small time gaming since I find dual booting too much of a nuisance to even bother using Ubuntu at all (sorry!). I have an Asus EAH6850 DirectCU Radeon HD 6850 graphics card and I've installed the additional ATI/AMD proprietary FGLRX graphics driver, but when I open a Windows XP 32bit machine I installed through VMware, I get this message: "The GPU driver currently installed on this host may cause issues with VMware products. If you notice any issues please disable the 3D support in the affected virtual machines." I still have 3D capabilities in the VM but they are very very choppy even running the DX tests (the spinning cube). I've seen people on youtube and other forums saying that since the new 3D acceleration in VMware 8 gaming is very possible through VMs (and I've seen them running the DX tests with the spinning cube very smoothly). I'm wondering if my graphics card isn't fully supported or if I have installed it wrong. Also when I check system info (on the host Ubuntu machine) it says "Graphics VESA:BARTS" Should my Radeon HD 6850 be showing up there? The rest of my basic system info i5 2500k 8GB 1600MHz memory Guest is running with access to all 4 cores of processor and 3gb memory assigned.

    Read the article

  • Are Intel compilers really better than Microsoft ones?

    - by Rocket Surgeon
    Years ago I was surprised when discovered that Intel sells Studio compatible compilers. I tried it in particular for C/C++ as well as fantastic diagnostic tools. But the code was simply not that computationally intensive to notice the difference. The only impression was: did Intel really did it for me just now, Wow, amazing tools with nanoseconds resolution, unbeleivable. But the trial ended and team never seriously considered a purchase. From your experience, if license cost does not matter, which vendor is a winner ? It is not broad or vague question or attemt to spark a holy war. This sort of question about 2 very visible tools. Nobody likes when tools have any mysteries or surprises. And choices between best and best are always the pain. I also understand the "grass greener" argument. I want to hear all "what ifs" stories. What if Intel just locally optimizes it for the chip stepping of the month, and not every hardware target will actually work as well as Microsoft compiled ? What if AMD hardware is the target and everything will slow down for no reason ? Or on other hand, what if Intel's hardware has so many unnoticable opportunities, that Microsoft compiler writers are too slow to adopt and never implement in the compiler ? What if both are the same exactly, actually a single codebase just wrapped into 2 different boxes and licensed to both vendors by some 3rd party shop? And so on. But someone knows some answers.

    Read the article

  • Ubuntu 12.10 ATI Driver 12.11 fails after compiz and xorg update

    - by Lukasz W.
    I updated my system via the package manager from Unity and next restart was just blackness. After being here: http://linux.hootip.com/amd-catalyst-12-11-beta-fix-and-installation-the-drivers-on-ubuntu-12-11/ I had the Catalyst 12.11 Beta driver installed. I checked my /var/log/apt/history.log and the update I received was of compiz and xorg packages. I tried to get latest release info, but all I get from their pages are commit info; I can't tell what was n the package update I got served. Anyone knows what was in the latest xorg/compiz release that broke the driver? Which driver should I use now? For completeness this is how I got the system back to boot (probably lame and not elegant): Boot with GRUB selection "More Ubuntu options (or sth like that), From secondary screen select 3.5.0-19 with boot options, When system prompts on stuff you'd like to do, select "root" - Drop to root shell, There: # mount -o remount,rw / # mv /etc/X11/xorg.conf /etc/X11/xorg.conf.failed # /usr/share/ati/fglrx-uninstall.sh # reboot This got be back on my feet.

    Read the article

  • Mohsen Agsen on C++

    - by raccoon_tim
    As I already blogged a while back, native code has been on the lips of many since TechEd 2011. Microsoft seems very committed to actually putting the language to use again after all these years of radio silence. Regarding this I urge you all guys to watch this video interview of Mohsen Agsen about C++ Today and Tomorrow http://channel9.msdn.com/Shows/Going+Deep/Mohsen-Agsen-C-Today-and-Tomorrow on Channel 9. What I find very inspiring about this interview is that Microsoft has a number of internal projects where they are using C++ and they really understand the value of C++ as a highly performant programming language. He also talks about combining managed code, scripted code and native code to get the most out of each of them. This is something that we are doing a lot in the game industry, since we recognize the need for performant platform code with an easy to write scripting layer on top of that. This is something I intend to blog about in the near future, so stay tuned! Another great thing that I bumped into recently is C++ AMP that was announced at this year’s AMD Fusion Developer Summit. I would recommend watching Herb Sutter’s keynote on the subject at http://channel9.msdn.com/posts/AFDS-Keynote-Herb-Sutter-Heterogeneous-Computing-and-C-AMP.

    Read the article

  • Ubuntu 12.04 does not suspend with proprietary driver for Radeon 6800

    - by Mike
    I'm running Ubuntu 12.04 x86_64 (though these issues have existed in previous releases too) and have a Radeon 6800 graphics card. I've run into issues with the open-source driver (the system would randomly hang when shutting down) so I switched to the proprietary driver (I compiled it myself using these instructions), but I am having new problems now. The main issue is that when I go into sleep mode, about 50-75% of the time, the screen goes black but the monitor does not actually shut off, and I can hear that the fans/hard drive are not suspending either. I can't get the computer to wake up (Ctrl+Alt+F1,2,3,etc. does not work), and I always end up force shutting down with the power button. I'd really appreciate help! Here is some information that might be helpful: $ fglrxinfo display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 6800 Series OpenGL version string: 4.2.11631 Compatibility Profile Context $ dmesg | grep fglrx [...] [ 6.718606] [fglrx] module loaded - fglrx 8.96.4 [Apr 5 2012] with 1 minors [...]

    Read the article

  • Mouse doesn't work & internet connection not made in Ubuntu 12.04 LTS

    - by David Skare
    Yesterday, Nov 15, 2012, I booted into my Ubuntu 12.04 LTS system. It has resided on a Crucial 128 GB SSD with about 90% free space since early summer. I also have Windows 7 loaded on another Crucial 256 GB SSD. Ubuntu has set up a dual boot system for me even though each OS has its own SSD. I have been using this setup without problems since summer. Yesterday, when the boot process finished, my Microsoft Comfort Mouse 3000 did not work and there was a message that Ubuntu was not connected to the internet. So w/o the mouse I was forced to turn the machine off manually. About 4 days ago Ubuntu worked fine and booting into Win 7 also works fine. I have a backup machine with the same style mouse on it so I swapped the mouse onto this system. Same results. But both mice work when booting into Win 7. Today I removed both SSDs and installed my Ubuntu 12.04 HD which has not been used since I moved Ubuntu to the SSD from it. Same results. Between the last time I used Ubuntu 12.04 on the SSD and when I tried to use it again I made no changes to my machine, either hardware or software. My machines specs are: AMD FX-6100, MSI 990FXA-GD65 AM3+ format with latest BIOS (Ver 19.9), Corsair Vengeance 1866 MHz memory - 16 GB (4GB X 4 sticks), MSI N580GTX video card (nVidia 306.97 drivers), Sony Bravia 32" HD TV as a monitor, Pioneer BluRay DVD-RW, DSL connection to internet thru a router (10 mps), Crucial 128 GB SSD (90% free space), Microsoft Comfort Mouse 3000 I try to maintain current BIOS and drivers for all devices. I mostly use my Ubuntu system for programming in GCC and OpenCOBOL, surfing the internet and e-mailing. No games are installed. I'm stumped! If anyone has experienced this same problem I'd appreciate knowing how you solved it. TIA, Dave

    Read the article

  • Gnome3 shell video corruption with ATI Radeon HD 4850 on 11.10 Oneiric

    - by AndyAtTheWebists
    I have a problem similar to what's been mentioned in a few other questions, namely: Ati incompatible with Gnome-shell? Gnome Shell Glitched Top Bar Ubuntu 11.10 I have read a number of other posts here and on other forums and have tried a bunch of different solutions. The Problem The problem manifests itself only in Gnome3. I have tried KDE, Unity and KFCE and all are fine. The graphics corruption is visible only on gnome panels (see images below). Everything works fine with the free ATI drivers, but they just lack power. The problem occurs with the proprietary ones from AMD/ATI. I have installed version 11.11 and 12.1 as per the instructions on wiki.cchtml.com/index.php/Ubuntu_Oneiric_Installation_Guide. I have the same exact problem in both cases. I have tried this on clean installs of Ubuntu 11.10 Oneiric Ocelot (x64 and x86) and on Linux Mint 12 (x64) with the same results. Also, it looks like after some time of not using it, the PC just freezes. Maybe an overheat? Will look into it. Things I've Tried I have tried the following fixes: Different versions of drivers from ATI including the latest - this worked for some, not for me. Installing Oneiric specific package generated from driver, as well as the default install Removed the Unity Global menu Disabled file manager handling desktop Disabled Compiz "detect refresh rate" Sync to VBlank in Compiz on and off Please help! This is the first time in 10 years that I've finally had the chance to switch my primary desktop to Linux (stopped doing .NET dev work), and this is really getting me down. This is what the problem looks like: And:

    Read the article

  • Internet is far slower in Ubuntu than Windows 7 on dual-booted machine

    - by Tim
    Edit: I'll leave the original post as-is, but after further investigation, it appears that the problem is something to do with my wi-fi card. Speeds are normal when I connect via cable. Edit 2: Problem was solved. It was something to do with the wireless card drivers. I normally use Windows 7 on my laptop and have internet speeds that are normally about 15-20 Mb/s. I have recently dual-booted with Ubuntu 12.10, and have noticed that internet speeds are drastically slower in Ubuntu. When tested, speeds range from 0.2-2 Mb/s, although occasionally being significantly faster than that or even stopping completely for short periods of time. I've also noticed that when first booting into Ubuntu, speeds start fairly fast, and drop to incredibly slow with a few seconds to a few minutes. There's still some possibility that the issue may be with my ISP, as things seem slower than usual even in Windows, but I suspect that it is related to Ubuntu, as things are far slower in Ubuntu than in Windows. I'm wondering, what could be the cause of this? Potentially relevant information: -I've dual booted before on this machine with earlier versions of Ubuntu (different ISP at the time) with no problem. ISP: Rogers (Major Canadian ISP) System info (Gateway NV53a Laptop): Operating System MS Windows 7 Home Premium 64-bit CPU AMD Phenom II N970 Caspian 45nm Technology RAM 6.00 GB Dual-Channel DDR3 @ 664MHz (9-9-9-24) Motherboard Gateway SJV51_DN (Socket S1G4) Graphics Generic PnP Monitor (1366x768@60Hz) ATI Mobility Radeon HD 4250 (Acer Incorporated [ALI]) Hard Drives 733GB TOSHIBA TOSHIBA MK7559GSXP ATA Device (SATA) Networking info: Connected through Wi-Fi Atheros AR5B97 Wireless Network A

    Read the article

  • Setting up Cluster Configuration using an existing web server as a Primary Node?

    - by RapidWebs
    Thanks in advance for any help which is issued! I am having a slight issue, and need help with the decision making process when it comes to setting up my Cluster Configuration, consisting on a line of Ubuntu Servers (12.04). We currently have a Primary node, which resides in the US within a Datacenter, but we are going to be using this for all serious bandwidth and resource intensive websites, and through a configuration of Virtualmin + Webmin, will be setup as a sort of pseudo-cluster, using Virtualmins Cluster Modules. Anyways, on to the issue: We also have a business line setup locally, with three servers. here are their specs: Intel P4 2.4 ghz, 1GB Ram, 110 gb sata, Ubuntu 12.04* AMD 1.3 ghz, 512MB Ram, 20 GB IDE P3 Xeon 800mhz (dual physical processors), 1GB Ram, 3 * 25 GB Raid Configuration (one in use for host operating system). The first machine is currently IN USE and is serving virtual hosts off a sub-domain. My question is this: How can I integrate the Secondary node (which will be the Primary node per say, in this smaller configuration...) which is currently in use, into the cluster configuration w/ the other two servers for: Sharing Resources Redundancy (HA?) NFS /w the two Raid Disks without having the FORMAT the secondary node, and start fresh moving all my services in to a DRBD network drive or something similar, and than restoring all active virtualmin's Virtual hosts. the idea is that I want minimal downtime to people currently being served from server2.mywebsite.com, and from what I understand, all services need to be on a NFS so that they can be mounted on demand and accessed from the other machine taking over (i.e. Heartbeat + DRBD Config.) but my issue is that i already have all these services installed to their default directory structure: how can i most easily setup this NFS and HA system, move all my desires services to this new drive, and do it with minimal down time, and without breaking Virtualmin and everything else on my server? even just some pointers, a thread i could read, or a step by step check list or run down of commands i could issue to get started would be great! thanks!

    Read the article

  • Wireless drops on HP ENVY dv6 with RT3290 wireless, worked without problem prior to upgrading to Ubuntu 13.10, can it be fixed?

    - by Tim
    I have a HP ENVY dv6 Notebook PC with an AMD A10 quad core and RT3290 wireless. Since I upgraded from Ubuntu 13.04 to 13.10, the wireless connects, but then drops after a few minutes or longer, whether or not I am running openconnect to get through a VPN. If I attempt to run a remote X client (e.g. remote xterm) it drops. If I don't run an X client, it disconnects after a while, requiring a reload of the driver and reconnect. Wireless info... sudo lshw -c network *-network description: Wireless interface product: RT3290 Wireless 802.11n 1T/1R PCIe vendor: Ralink corp. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 68:94:23:a7:09:cb width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.11.0-12-generic firmware=0.37 ip=192.168.1.115 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:55 memory:f0210000-f021ffff I have successfully built and installed the MediaTek driver with no luck on connecting, then the system hangs on reboot and I have to recover/undo the changes to boot successfully.

    Read the article

  • How can I set up FakeRAID/SoftRAID using mdadm without losing data?

    - by Danatela
    There is RAID0 of 2 drives connected through Silicon Image 3132 SATA SoftRAID controller. Under Windows it was partitioned as one dynamic GPT-disk having 4 TB NTFS volume. There is a lot of music and movies on the drive. I'm trying to get him to be seen under Ubuntu as a single disk, not as 2 by 2 terabytes. I tried to read it through dmraid, had no success, it is not displayed in /dev/mapper. Also tried to configure the kernel, but did not find anything suspicious, the driver for my controller was on. There is also a driver from the manufacturer, but it is only available for RHEL and SLES. Here it's reported that SoftRAID is supported by the kernel, but apparently not completely. If I thrust drives in the AMD controller, built into the motherboard, the drive is seen as a single, but the data is lost. I know about mdadm that it is able to ditch all the information on the disks. So, is it possible to somehow create an array without actually recording information on used drives and to make the system correctly identify sections on it later? Information about the array: /dev/sdf - Disk 0 /dev/sdg - Disk 1 Array type: Stripe Block Size: 64KB Also, a device /dev/md1 is created using command mknod /dev/md1 b 9 1

    Read the article

  • 14.04 LTS Unity no longer boots after last 94 MB update

    - by Harryg123
    I am running 14.04 LTS, Unity, on an HP Pavillion 15, 4GBRAM, 750 GB hdd, I-5 machine, with AMD 8600M graphics card built in. I have disabled the dash and all Ubuntu spyware. I have been faithfully loading all updates as they appear. This morning it asked for a 94 MB update (bringing kernel to .27, I think. Now, I can boot, get to login screen, but it freezes after that. Keyboard doesn't work at that point, but mouse does. I booted into recovery mode, tried to run in generic graphics mode, -- system again froze. I also pressed [esc] during boot, but saw nothing strange; then text disappeared and was replaced by login screen. I am not a hobbyist; this is a production machine and I have a lot of work to do today. Having a standard software update render my machine completely useless... sigh. Perhaps the simplest thing to do would be to revert to the previous configuration. How do I do that? I can boot into recovery mode. But I have no idea how to proceed. TIA for all help. -Harry

    Read the article

  • How do I force Wubi to install a 32-bit version?

    - by marx
    I'm using Windows 8 (32bit) customer preview and installing WUBI Ubuntu 12,04.1. I down loaded 32 bit installer from ubuntu dot com, The wubi installer says AMD 64 xt. I had a previous 12,04 install and in the terminal typed in uname -a, it say's 64 bit. I also opened detail from the system and it read 64 bit system. My question is: how to ensure that a windows/wubi/ubuntu/installer is 32 bit or 64 bit BEFORE making a commitment to install from the wrong wubi install? After posting this I did another wubi installation. Signed into ubuntu, opened system settings, open Details: OS Type 64 Bit. Why is it doing this? I have a 32 Bit machine: Toshiba Satellite A-215 S5818 (previous Windows Vista)<--wiped clean. from an earlier installation of Ubuntu 10.10 which worked, in feb 2012 i installed Win8 Customer Preview Release (32Bit) which took over the BOOT order and 140 GB Hard Disk. I am trying patiently to install WUBI 32 BIT Ubuntu 12.04 Install, it keeps returning 64 BIT install.. Why?? I should also mention that i was successful in a dual boot install ubuntu 10.04/win8 32 bit install and upgraded to 12.04 which is fine for now, but i want a win8/wubi/ubuntu12.04 32 bit working not 64 bit breaking what i have. thank you.

    Read the article

  • Are Intel compilers really better than the Microsoft ones?

    - by Rocket Surgeon
    Years ago, I was surprised when I discovered that Intel sells Visual Studio compatible compilers. I tried it in particular for C/C++ as well as fantastic diagnostic tools. But the code was simply not that computationally intensive to notice the difference. The only impression was: did Intel really do it for me just now, wow, amazing tools with nanoseconds resolution, unbelievable. But the trial ended and the team never seriously considered a purchase. From your experience, if license cost does not matter, which vendor is the winner? It is not a broad or vague question or attemt to spark a holy war. This sort of question is about two very visible tools. Nobody likes when tools have any mysteries or surprises. And choices between best and best are always the pain. I also understand the grass is always greener argument. I want to hear all "what ifs" stories. What if Intel just locally optimizes it for the chip stepping of the month, and not every hardware target will actually work as well as Microsoft compiled? What if AMD hardware is the target and everything will slow down for no reason? Or on the other hand, what if Intel's hardware has so many unnoticable opportunities, that Microsoft compiler writers are too slow to adopt and never implement it in the compiler? What if both are the same exactly, actually a single codebase just wrapped into two different boxes and licensed to both vendors by some third-party shop? And so on. But someone knows some answers.

    Read the article

  • USB Ports In Wrong Mode, How To Use usbmodeswitch?

    - by user86872
    I haven't had access to my USB ports as media devices for a couple days now. I've been reading and researching everything I can find but I can't find a good guide for usbmodeswtich or usbms that I can decipher. The USB's are fine for power, but won't support my android phone as a media device, which is killing me because I use adb everyday, and won't support my plug and play mouse any longer. Not sure what caused the switch, though I think it may be related to the suspend issue I've read about, but the solutions in those threads I read also didn't work. Below is my system information and details. System: Ubuntu 12.04, 64-bit, Dedicated Machine Machine: HP-Pavillion g6 notebook, AMD A6 Quad Core Processor USBs used for: Cooling dock, Android Debug Bridge, Wireless Mouse Attempted Mod Probe, udev restart, unable to attempt lsusb due to my own lack of knowledge. :) Last Attempt Readout: ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usbhid && sleep 5 && sudo modprobe usbhid ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo restart udev udev start/running, process 2624 ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0461:4de7 Primax Electronics, Ltd webcam Any help would be greatly appreciated!

    Read the article

  • NVIDIA X Server TwinView isses with 2 GeForce 8600GT cards

    - by Big Daddy
    Full disclosure, I am relatively new to Linux and loving the learning curve but I am undoubtedly capable of ignorant mistakes I have a rig I am building for my home office desktop. The basics: Gigabyte MB AMD 64bt processor Ubuntu 12.04 64bit two Nvidia GeForce 8600GT video cards using a SLI bridge two 22" DVI input HP monitors So here is my issue (it is driving me nuts) with X Server. If I plug both monitors into GPU 0 X Server auto configures TwinView and all is grand, works like a charm, though both are running off of GPU 0. If I plug one monitor into GPU 0 and one monitor into GPU 1, X Server enables the monitor on GPU 0, sees but keeps the monitor on GPU 1 disabled. My presumption (we all know the saying about presumptions) is that all I would have to do is select the disabled monitor on GPU 1 and drop down the Configure pull down and select TwinView...problem is when the monitors are plugged in this way, the TwinView option is greyed out and can not be selected. What am I not understanding here? Is there some sort of configuration I need to do elsewhere for Ubuntu to utilize both GPU's? Any help will be most appreciated, thanks in advance.

    Read the article

  • ksoftirqd uses 100% cpu

    - by andy
    I am running 32bit Ubuntu 10.04. A lot of the times ksoftirqd/0 or ksoftirqd/1 start using up 100% CPU for no apparent reason, and I am forced to reboot my laptop. Incidentally this also happens when I maximize my (youtube) videos on Chrome and Fireox, but once I un-maximize the videos the CPU usage goes down to the original levels. Any ideas what it going on? --- Addendum --- dmesg produces a ~2000 line output. I searched for 'error' and 'warning' in the output, and here are the relevant lines (along with some headers): [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=157dcfda-acd6-4d1b-a6a8-ff9ccff61906 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210518] ata1: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq TrStaTrns } [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error) [58673.134623] chrome[20101]: segfault at 7f38bc4ad000 ip 00007f38be769ecc sp 00007fff24616850 error 4 in libpepflashplayer.so[7f38bdc08000+e55000] [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error)

    Read the article

  • Why would video stutter on HDMI but not on DVI?

    - by CorvT
    I've got a system running Ubuntu 12.04 with an i3 2120T CPU/GPU. When I play video through mplayer, I notice when I'm hooked up to a screen via HDMI there is a small stutter (1-2 frames) every few seconds. I don't see this happening when I connect via DVI on the same screen. Resolution and refresh rate are same for both HDMI and DVI, so I'm not sure where else the problem could be coming from. I've also tried two different screens, and different cables. I see the stutter with either HDMI-HDMI cables, or DVI-HDMI cable with DVI from the PC and HDMI into the screen. I don't see the stutter with DVI-DVI cables, or when I use HDMI-DVI cables with HDMI from the PC to DVI into the screen. I've also tried using an AMD 5XXX series card with the open source radeon driver, and saw the same problem. I then tried an nVidia GeForce 210 card with the closed source driver, and the stutter went away. To me this smells like a driver/mesa/glx issue (since the problem went away with the nvidia card/driver), but I have no idea how to track this down.

    Read the article

  • Laptop runs HOT after 12.10 upgrade!

    - by dinkelk
    I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu additions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >