Search Results

Search found 7592 results on 304 pages for 'dev kanchen'.

Page 41/304 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• Assembling Software RAID in Live CD for data recovery

  - by Maletor

  I need help recovering some data that's on my RAID which is on a LVM on my server running Ubuntu. What happened was I deleted the logical volume that controlled my swap space which was on a partition on drives sda2, sdb2, sdc2, and sdd2 in RAID1. This foobared my whole system for one reason or another. Booting leave me with grub rescue and an error saying that it is an unknown filesystem. When I boot to a live cd I can see my RAID arrays and I can even start them up. However, it doesn't appear to mount them anywhere so I can't see the data. I am in the live cd now and I have done sudo apt-get install mdadm lvm2 so it should be mounting them correctly. I just can't see why it wouldn't. Please any help is appreciated here. Here is some output. By the way, there are 3 RAIDs, 1) /boot 100mb RAID1, 2) swap 10gb RAID1, 3) root 990GB RAID5 ubuntu@ubuntu:~$ df -h Filesystem Size Used Avail Use% Mounted on aufs 124M 101M 18M 86% / none 2.0G 324K 2.0G 1% /dev /dev/sde1 2.0G 826M 1.2G 42% /cdrom /dev/loop0 667M 667M 0 100% /rofs none 2.0G 164K 2.0G 1% /dev/shm tmpfs 2.0G 28K 2.0G 1% /tmp none 2.0G 92K 2.0G 1% /var/run none 2.0G 0 2.0G 0% /var/lock none 2.0G 0 2.0G 0% /lib/init/rw /dev/md1 91M 73M 15M 84% /media/5ac3dbf1-a6c5-409c-96ae-edc6e27992c7 ubuntu@ubuntu:~$ cat /etc/fstab aufs / aufs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda2 swap swap defaults 0 0 /dev/sdb2 swap swap defaults 0 0 /dev/sdc2 swap swap defaults 0 0 /dev/sdd2 swap swap defaults 0 0

  Read the article

• How to delete removed devices from a mdadm RAID1?

  - by Kabuto

  I had to replace two hard drives in my RAID1. After adding the two new partitions the old ones are still showing up as removed while the new ones are only added as spare. I've had no luck removing the partitions marked as removed. Here's the RAID in question. Note the two devices (0 and 1) with state removed. $ mdadm --detail /dev/md1 mdadm: metadata format 00.90 unknown, ignored. mdadm: metadata format 00.90 unknown, ignored. /dev/md1: Version : 00.90 Creation Time : Thu May 20 12:32:25 2010 Raid Level : raid1 Array Size : 1454645504 (1387.26 GiB 1489.56 GB) Used Dev Size : 1454645504 (1387.26 GiB 1489.56 GB) Raid Devices : 3 Total Devices : 3 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 12 21:30:39 2013 State : clean, degraded Active Devices : 1 Working Devices : 3 Failed Devices : 0 Spare Devices : 2 UUID : 10d7d9be:a8a50b8e:788182fa:2238f1e4 Events : 0.8717546 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 2 8 34 2 active sync /dev/sdc2 3 8 18 - spare /dev/sdb2 4 8 2 - spare /dev/sda2 How do I get rid of these devices and add the new partitions as active RAID devices? Update I seem to have gotten rid of them. My RAID is resyncing, but the two drives are still marked as spares and are number 3 and 4, which looks wrong. I'll have to wait for the resync to finish. All I did was to fix the metadata error by editing my mdadm.conf and rebooting. I tried rebooting before, but this time it worked for whatever reason. Number Major Minor RaidDevice State 3 8 2 0 spare rebuilding /dev/sda2 4 8 18 1 spare rebuilding /dev/sdb2 2 8 34 2 active sync /dev/sdc2

  Read the article

• Ubuntu 10.04 and fedora 14 grub conflict

  - by sawren

  I tried to triple boot Windows xp, Fedora 14 and Ubuntu 10.04. I first installed Windows xp, then fedora followed by Ubuntu. The problem is that i don't get option to boot Ubuntu while Xp boots fine. It seems Ubuntu was unable to replace Fedora's grub with its own at MBR. Looking at their grub conf file, Fedora and Ubuntu identifies same harddisk as two different devices and i do have another 80 GB harddisk which doesn't have any OS. Below is the details on my partitions and partial information from grub files of both OS. Device Boot Start End Blocks Id System /dev/sda1 * 63 40965749 20482843+ 7 HPFS/NTFS /dev/sda2 102414436 312576704 105081134+ f W95 Ext'd (LBA) /dev/sda3 40965750 102414374 30724312+ 83 Linux - /Home (for fedora) /dev/sda5 102414438 204812684 51199123+ 7 HPFS/NTFS /dev/sda6 204812748 253634219 24410736 83 Linux -- ubuntu /dev/sda7 253634283 302455754 24410736 83 Linux -- fedora /dev/sda8 302455818 312576704 5060443+ 82 Linux swap / Solaris grub.cfg from ubuntu ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,7)' search --no-floppy --fs-uuid --set cd55e078-a2c1-4d8a-9e87-ae838b6f4a05 linux /boot/vmlinuz-2.6.32-21-generic root=UUID=cd55e078-a2c1-4d8a-9e87-ae838b6f4a05 ro quiet splash initrd /boot/initrd.img-2.6.32-21-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,7)' search --no-floppy --fs-uuid --set cd55e078-a2c1-4d8a-9e87-ae838b6f4a05 echo 'Loading Linux 2.6.32-21-generic ...' linux /boot/vmlinuz-2.6.32-21-generic root=UUID=cd55e078-a2c1-4d8a-9e87-ae838b6f4a05 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-21-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod ext2 set root='(hd1,7)' search --no-floppy --fs-uuid --set cd55e078-a2c1-4d8a-9e87-ae838b6f4a05 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod ext2 set root='(hd1,7)' search --no-floppy --fs-uuid --set cd55e078-a2c1-4d8a-9e87-ae838b6f4a05 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Microsoft Windows XP Professional (on /dev/sdb1)" { insmod ntfs set root='(hd1,1)' search --no-floppy --fs-uuid --set cad48cc6d48cb5eb drivemap -s (hd0) ${root} chainloader +1 } menuentry "Fedora (2.6.35.14-96.fc14.i686) (on /dev/sdb6)" { insmod ext2 set root='(hd1,6)' search --no-floppy --fs-uuid --set 6aee34cf-f77a-489a-9361-85d07194b84b linux /boot/vmlinuz-2.6.35.14-96.fc14.i686 ro root=UUID=6aee34cf-f77a-489a-9361-85d07194b84b rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet initrd /boot/initramfs-2.6.35.14-96.fc14.i686.img } menuentry "Fedora (2.6.35.6-45.fc14.i686) (on /dev/sdb6)" { insmod ext2 set root='(hd1,6)' search --no-floppy --fs-uuid --set 6aee34cf-f77a-489a-9361-85d07194b84b linux /boot/vmlinuz-2.6.35.6-45.fc14.i686 ro root=UUID=6aee34cf-f77a-489a-9361-85d07194b84b rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet initrd /boot/initramfs-2.6.35.6-45.fc14.i686.img } ### END /etc/grub.d/30_os-prober ### grub.conf from fedora default=0 timeout=5 splashimage=(hd0,5)/boot/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.35.14-96.fc14.i686) root (hd0,5) kernel /boot/vmlinuz-2.6.35.14-96.fc14.i686 ro root=UUID=6aee34cf-f77a-489a-9361-85d07194b84b rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet initrd /boot/initramfs-2.6.35.14-96.fc14.i686.img title Fedora (2.6.35.6-45.fc14.i686) root (hd0,5) kernel /boot/vmlinuz-2.6.35.6-45.fc14.i686 ro root=UUID=6aee34cf-f77a-489a-9361-85d07194b84b rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet initrd /boot/initramfs-2.6.35.6-45.fc14.i686.img title Other rootnoverify (hd0,0) chainloader +1

  Read the article

• Need help partitioning when reinstalling Ubuntu 14.04

  - by Chris M.

  I upgraded to 14.04 about a month ago on my HP Mini netbook (about 16 GB hard disk). A few days ago the system crashed (I don't know why but I was using internet at the time). When I restarted the computer, Ubuntu would not load. Instead, I got a message from the BIOS saying Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key I took this to mean that I needed to reinstall 14.04. When I try to reinstall Ubuntu from the USB stick, I choose "Erase disk and install Ubuntu" but then I get a message: Some of the partitions you created are too small. Please make the following partitions at least this large: / 3.3 GB If you do not go back to the partitioner and increase the size of these partitions, the installation may fail. At first I hit Continue to see if it would install anyway, and it gave the message: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition # 1 (sda) at / failed. You may resume partitioning from the partitioning menu. The second time I hit Go Back, and it took me to the following partitioning table: Device Type Mount Point Format Size Used System /dev/sda /dev/sda1 ext4 (checked) 3228 MB Unknown /dev/sda5 swap (not checked) 1063 MB Unknown + - Change New Partition Table... Revert Device for boot loader installation: /dev/sda ATA JM Loader 001 (4.3 GB) At this point I'm not sure what to do. I've never partitioned my hard drive before and I don't want to screw things up. (I'm not particularly tech savvy.) Can you instruct me what I should do. (P.S. I'm afraid the table might not appear as I typed it in.) Results from fdisk: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 4294 MB, 4294967296 bytes 255 heads, 63 sectors/track, 522 cylinders, total 8388608 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 7860 MB, 7860125696 bytes 155 heads, 31 sectors/track, 3194 cylinders, total 15351808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009a565 Device Boot Start End Blocks Id System /dev/sdb1 * 2768 15351807 7674520 b W95 FAT32 ubuntu@ubuntu:~$ Here is what it displays when I open the Disks utility (I tried the screenshot terminal command you suggested but it didn't seem to do anything): 4.3 GB Hard Disk /dev/sda Model: JM Loader 001 (01000001) Size: 4.3 GB (4,294,967,296 bytes) Serial Number: 01234123412341234 Assessment: SMART is not supported Volumes Size: 4.3 GB (4,294,967,296 bytes) Device: /dev/sda Contents: Unknown (There is a button in the utility that when you click it gives the following options: Format... Create Disk Image... Restore Disk Image... Benchmark but SMART Data & Self-Tests... is dimmed out) When I hit F9 Change Boot Device Order, it shows the hard drive as: SATA:PM-JM Loader 001 When I hit F10 to get me into the BIOS Setup Utility, under Diagnostic it shows: Primary Hard Disk Self Test Not Support NetworkManager Tool State: disconnected Device: eth0 Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 00:26:55:B0:7F:0C Capabilities: Carrier Detect: yes Wired Properties Carrier: off When I run command lshw -C network, I get: WARNING: you should run this program as super-user. *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:16 memory:feafc000-feafffff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: c0 serial: 00:26:55:b0:7f:0c capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:febc0000-febfffff ioport:ec80(size=128) WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

  Read the article

• Failure connecting to Dell MD3200i from XenServer 6.2 pool

  - by Tom Sparrow

  This question also asked at Citrix Forums http://forums.citrix.com/thread.jspa?threadID=332289 I have a MD3200i that is currently working fine with my Xen5.6 pool, but I cannot get a connection to the new 6.2 pool to work. I previously had a problem with a 6.0 upgrade (which is why the old pool is still on 5.6), but rolled back rather than fix it as it wasn't urgent at the time. This install is on new machines - I tried 6.1 first (which had the same problems) then 6.2 was released the second day after installation so I switched to that. I've not installed anything from the Dell resource DVD at this point - I can't find anything saying I should, and everything I have read suggests it shouldn't be necessary. I can ping all 8 ip addresses from both servers in the pool, iscsiadm -m discovery works fine, I can login to the nodes and iscsiadm reports the sessions active correctly. I've added the required sections to multipath.conf, but multipath -ll reports DM multipath kernel driver not loaded immediately after boot. The following is a log of a test session immediately after boot. root@xen3 ~]# iscsiadm -m node --loginall=all Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.101,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.101,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.104,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.102,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.103,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.104,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.102,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.103,3260] Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.101,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.101,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.104,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.102,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.103,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.104,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.102,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.103,3260]: successful [root@xen3 ~]# iscsiadm -m session tcp: [1] 192.168.130.101:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [2] 192.168.131.101:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [3] 192.168.131.104:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [4] 192.168.131.102:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [5] 192.168.130.103:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [6] 192.168.130.104:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [7] 192.168.130.102:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [8] 192.168.131.103:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 [root@xen3 ~]# service multipathd restart ok Stopping multipathd daemon: [ OK ] Starting multipathd daemon: [ OK ] [root@xen3 ~]# multipath Jul 04 09:58:47 | DM multipath kernel driver not loaded Jul 04 09:58:47 | DM multipath kernel driver not loaded [root@xen3 ~]# multipath -ll Jul 04 09:59:03 | DM multipath kernel driver not loaded Jul 04 09:59:03 | DM multipath kernel driver not loaded [ root@xen3 ~]# modprobe dm_multipath [root@xen3 ~]# multipath Jul 04 10:19:50 | 36b8ca3a0e7024800194a0bd11891cd14: ignoring map create: 1Dell_Internal_Dual_SD_0123456789AB undef Dell,Internal Dual SD size=1.9G features='0' hwhandler='0' wp=undef `-+- policy='round-robin 0' prio=1 status=undef `- 7:0:0:0 sdb 8:16 undef ready running [root@xen3 ~]# multipath -ll 1Dell_Internal_Dual_SD_0123456789AB dm-1 Dell,Internal Dual SD size=1.9G features='0' hwhandler='0' wp=rw `-+- policy='round-robin 0' prio=1 status=enabled `- 7:0:0:0 sdb 8:16 active ready running [root@xen3 ~]# iscsiadm -m session tcp: [1] 192.168.130.101:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [2] 192.168.131.101:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [3] 192.168.131.104:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [4] 192.168.131.102:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [5] 192.168.130.103:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [6] 192.168.130.104:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [7] 192.168.130.102:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [8] 192.168.131.103:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 [root@xen3 ~]# dmesg | tail -n 50 [ 1161.881010] sd 8:0:0:0: [sdf] Unhandled error code [ 1161.881013] sd 8:0:0:0: [sdf] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1161.881017] sd 8:0:0:0: [sdf] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1161.881024] end_request: I/O error, dev sdf, sector 0 [ 1161.881031] Buffer I/O error on device sdf, logical block 0 [ 1161.881045] sd 15:0:0:0: [sdi] Unhandled error code [ 1161.881048] sd 15:0:0:0: [sdi] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1161.881052] sd 15:0:0:0: [sdi] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1161.881058] end_request: I/O error, dev sdi, sector 0 [ 1161.881065] Buffer I/O error on device sdi, logical block 0 [ 1161.881122] sd 9:0:0:0: [sdg] Unhandled error code [ 1161.881124] sd 9:0:0:0: [sdg] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1161.881126] sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1161.881132] end_request: I/O error, dev sdg, sector 0 [ 1161.881140] Buffer I/O error on device sdg, logical block 0 [ 1168.220951] connection6:0: ping timeout of 15 secs expired, recv timeout 10, last rx 84060, last ping 85060, now 86560 [ 1168.220957] connection7:0: ping timeout of 15 secs expired, recv timeout 10, last rx 84060, last ping 85060, now 86560 [ 1168.220967] connection7:0: detected conn error (1011) [ 1168.220969] connection4:0: ping timeout of 15 secs expired, recv timeout 10, last rx 84060, last ping 85060, now 86560 [ 1168.220973] connection4:0: detected conn error (1011) [ 1168.220975] connection3:0: ping timeout of 15 secs expired, recv timeout 10, last rx 84060, last ping 85060, now 86560 [ 1168.220978] connection3:0: detected conn error (1011) [ 1168.220985] connection6:0: detected conn error (1011) [ 1168.480994] sd 14:0:0:0: [sde] Unhandled error code [ 1168.480998] sd 14:0:0:0: [sde] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1168.481001] sd 14:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1168.481009] end_request: I/O error, dev sde, sector 0 [ 1168.481015] Buffer I/O error on device sde, logical block 0 [ 1168.481076] sd 11:0:0:0: [sdc] Unhandled error code [ 1168.481078] sd 11:0:0:0: [sdc] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1168.481080] sd 11:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1168.481087] end_request: I/O error, dev sdc, sector 0 [ 1168.481092] Buffer I/O error on device sdc, logical block 0 [ 1168.481144] sd 10:0:0:0: [sdd] Unhandled error code [ 1168.481147] sd 10:0:0:0: [sdd] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1168.481150] sd 10:0:0:0: [sdd] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1168.481156] end_request: I/O error, dev sdd, sector 0 [ 1168.481163] Buffer I/O error on device sdd, logical block 0 [ 1168.481168] sd 13:0:0:0: [sdj] Unhandled error code [ 1168.481170] sd 13:0:0:0: [sdj] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1168.481172] sd 13:0:0:0: [sdj] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1168.481178] end_request: I/O error, dev sdj, sector 0 [ 1168.481184] Buffer I/O error on device sdj, logical block 0 [ 1457.105996] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1457.106155] device-mapper: multipath: Cannot access device path 8:0: -16 [ 1457.106164] device-mapper: table: 252:1: multipath: error getting device [ 1457.106172] device-mapper: ioctl: error adding target to table [ 1457.171292] device-mapper: multipath: Cannot access device path 8:0: -16 [ 1457.171299] device-mapper: table: 252:1: multipath: error getting device [ 1457.171304] device-mapper: ioctl: error adding target to table [root@xen3 ~]# fdisk -l Disk /dev/sda: 299.4 GB, 299439751168 bytes 255 heads, 63 sectors/track, 36404 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 5 40131 de Dell Utility /dev/sda2 * 6 528 4194304 83 Linux Partition 2 does not end on cylinder boundary. /dev/sda3 528 1050 4194304 83 Linux /dev/sda4 1050 36404 283986359+ 8e Linux LVM Disk /dev/sdb: 2040 MB, 2040528896 bytes 255 heads, 63 sectors/track, 248 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 1 248 1992028+ 83 Linux Disk /dev/dm-1: 2040 MB, 2040528896 bytes 255 heads, 63 sectors/track, 248 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/dm-1p1 1 248 1992028+ 83 Linux [root@xen3 ~]# xe sr-probe type=lvmoiscsi device-config:target=192.168.130.101 device-config:targetIQN=iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 Error code: SR_BACKEND_FAILURE_107 Error parameters: , The SCSIid parameter is missing or incorrect, <?xml version="1.0" ?> <iscsi-target/> Note: the xml ends there correctly on the last line - it doesn't ever return a list of LUNs (and there is one in the group on the SAN for those servers.

  Read the article

• Ubuntu server has slow performance

  - by Rich

  I have a custom built Ubuntu 11.04 server with a 6 disk software RAID 10 primary drive. On it I'm primarily running a PostgreSQL and a few other utilities that stream data from the web. I often find after a few hours of uptime the server starts to lag with all kinds of processes. For example, it may take 10-15 seconds after log-in to get a shell prompt. It might take 5-10 seconds for top to come up. An ls might take a second or two. When I look at top there is almost no CPU usage. There's a fair amount of memory used by the PostgreSQL server but not enough to bleed into swap. I have no idea where to go from here, other than to suspect the RAID10 (I've only ever had software RAID 1's before). Edit: Output from top: top - 11:56:03 up 1:46, 3 users, load average: 0.89, 0.73, 0.72 Tasks: 119 total, 1 running, 118 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.0%sy, 0.0%ni, 93.5%id, 6.2%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 16325596k total, 3478248k used, 12847348k free, 20880k buffers Swap: 19534176k total, 0k used, 19534176k free, 3041992k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1747 woodsp 20 0 109m 10m 4888 S 1 0.1 0:42.70 python 357 root 20 0 0 0 0 S 0 0.0 0:00.40 jbd2/sda3-8 1 root 20 0 24324 2284 1344 S 0 0.0 0:00.84 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.24 ksoftirqd/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 10 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/1 12 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/1 13 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/2 14 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/2:0 15 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/2 16 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/2 17 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/3 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/3:0 19 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/3 20 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/3 21 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset 22 root 0 -20 0 0 0 S 0 0.0 0:00.00 khelper 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kdevtmpfs 24 root 0 -20 0 0 0 S 0 0.0 0:00.00 netns 26 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers df -h rpsharp@ncp-skookum:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 1.8T 549G 1.2T 32% / udev 7.8G 4.0K 7.8G 1% /dev tmpfs 3.2G 492K 3.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.8G 0 7.8G 0% /run/shm /dev/sda2 952M 128K 952M 1% /boot/efi /dev/md0 5.5T 562G 4.7T 11% /usr/local free -m psharp@ncp-skookum:~$ free -m total used free shared buffers cached Mem: 15942 3409 12533 0 20 2983 -/+ buffers/cache: 405 15537 Swap: 19076 0 19076 tail -50 /var/log/syslog Jul 3 06:31:32 ncp-skookum rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="1070" x-info="http://www.rsyslog.com"] rsyslogd was HUPed Jul 3 06:39:01 ncp-skookum CRON[14211]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 06:40:01 ncp-skookum CRON[14223]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:01 ncp-skookum CRON[14328]: (woodsp) CMD (/home/woodsp/bin/mail_tweetupdate # email an update) Jul 3 07:00:01 ncp-skookum CRON[14327]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:28 ncp-skookum sendmail[14356]: q63E0SoZ014356: from=woodsp, size=2328, class=0, nrcpts=2, msgid=<[email protected]>, relay=woodsp@localhost Jul 3 07:00:29 ncp-skookum sm-mta[14357]: q63E0Si6014357: from=<[email protected]>, size=2569, class=0, nrcpts=2, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Jul 3 07:00:29 ncp-skookum sendmail[14356]: q63E0SoZ014356: to=Spencer Wood <[email protected]>,Martin Lacayo <[email protected]>, ctladdr=woodsp (1004/1005), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=62328, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (q63E0Si6014357 Message accepted for delivery) Jul 3 07:00:29 ncp-skookum sm-mta[14359]: STARTTLS=client, relay=mx3.stanford.edu., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 Jul 3 07:00:29 ncp-skookum sm-mta[14359]: q63E0Si6014357: to=<[email protected]>,<[email protected]>, ctladdr=<[email protected]> (1004/1005), delay=00:00:01, xdelay=00:00:00, mailer=esmtp, pri=152569, relay=mx3.stanford.edu. [171.67.219.73], dsn=2.0.0, stat=Sent (Ok: queued as 8F3505802AC) Jul 3 07:09:08 ncp-skookum CRON[14396]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:17:01 ncp-skookum CRON[14438]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 07:20:01 ncp-skookum CRON[14453]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:39:01 ncp-skookum CRON[14551]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:40:01 ncp-skookum CRON[14562]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:00:01 ncp-skookum CRON[14668]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:09:01 ncp-skookum CRON[14724]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:17:01 ncp-skookum CRON[14766]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 08:20:01 ncp-skookum CRON[14781]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:39:01 ncp-skookum CRON[14881]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:40:01 ncp-skookum CRON[14892]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Output of hdparm -t /dev/sd{a,b,c,d,e,f} This looks suspicious? /dev/sda: Timing buffered disk reads: 2 MB in 4.84 seconds = 423.39 kB/sec /dev/sdb: Timing buffered disk reads: 420 MB in 3.01 seconds = 139.74 MB/sec /dev/sdc: Timing buffered disk reads: 390 MB in 3.00 seconds = 129.87 MB/sec /dev/sdd: Timing buffered disk reads: 416 MB in 3.00 seconds = 138.51 MB/sec /dev/sde: Timing buffered disk reads: 422 MB in 3.00 seconds = 140.50 MB/sec /dev/sdf: Timing buffered disk reads: 416 MB in 3.01 seconds = 138.26 MB/sec

  Read the article

• GRE keepalive with Linux and RouterOS

  - by eri

  I have a Linux host and couple of routerboadrs. I created a GRE tunnel, but Linux does not answer keepalive packages. Then router mark gre connection as unreachable, so I cant send to Linux host from router subnet. If linux sends something into tunnel (ping, etc.) - RouterOS mark connection as reacheble. Second and next packages routed nicely until one minute idle (no traffic). Tunnel in linux a make in this way: remote=x.x.x.x dev=gre21 network=10.21.0.0/16 ip tunnel add ${dev} mode gre remote ${remote} ttl 255 ip addr add 172.16.1.1/24 peer 172.16.1.21 dev ${dev} ip link set ${dev} up ip route add ${network} dev ${dev} And ip l: 14: gre21: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1476 qdisc noqueue state UNKNOWN link/gre 0.0.0.0 peer 109.60.170.15 How to set state "running"? How to keep alive tunnel? Ping in cron?

  Read the article

• Problem after resizing partition for Fedora under Vmware fusion

  - by user20196

  Hi, I am running FC9 under VMware Fusion 3.0 I wanted to resize my /dev/sda2 partition. In order to do that I did the following: 0. changed the size of the vmware file (under VMware settings). 1. rebooted the host to rescue mode without mounted disks 2. fdisk - removed & added /dev/sda2 - i had bigger /dev/sda2 3. lvm pvresize /dev/sda2 4. lvm pvdisplay - it showed me bigger size on /dev/VolGroup00 for /dev/sda2 5. lvm vgchange -a y - device-mapper: reload ioctl failed: Invalid argument - 2 logical volume(s) in volume group "VolGroup00" now active This is not true because there is no /dev/VolGroup00/LogVol00 My whole "/" disappeared. dmsetup table, shows: VolGroup00-LogVol01: 0 2097152 linear 8:2 38338944 VolGroup00-LogVol00: Can some one help me to solve this? Thank You.

  Read the article

• After using lvextend, I can't recover unused space

  - by Cory Gagliardi

  I needed to add more disk space to my CentOS VM, so I added another virtual disk, then used lvextend to add the space to the existing partition. The steps I followed was: echo "- - -" > /sys/class/scsi_host/host0/scan pvcreate /dev/sdb vgextend VolGroup00 /dev/sdb lvextend -l +100%FREE /dev/VolGroup00/LogVol00 resize2fs /dev/VolGroup00/LogVol00 This worked fine. I subsequently filled up the VM, then deleted most of the used disk space. However, the unused disk space was never recovered after I deleted all of the files. This will illustrate what I'm saying better: # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 61G 32G 26G 56% / /dev/sda1 99M 20M 75M 21% /boot tmpfs 1006M 0 1006M 0% /dev/shm # pwd; du -h --max-depth=0 / 5.1G . I cannot figure out how to get the partition to see that only 5.1 GB is used. Any ideas what I'm doing wrong?

  Read the article

• EBS full device confusion

  - by Mike

  I have a 500GB EBS device (/dev/xvdf) mounted to /vol and all data on the box seems to be writing to /vol correctly (see du output below). For some reason /dev/xvda1 is totally full. Any idea what's going on here? $ df -h Filesystem Size Used Avail Use% Mounted on /dev/xvda1 32G 30G 8.0K 100% / udev 34G 8.0K 34G 1% /dev tmpfs 14G 176K 14G 1% /run none 5.0M 0 5.0M 0% /run/lock none 34G 0 34G 0% /run/shm /dev/xvdb 827G 201M 785G 1% /mnt /dev/xvdf 500G 145G 356G 29% /vol $ du -sh * 8.7M bin 18M boot 8.0K dev 5.1M etc 48K home 0 initrd.img 80M lib 4.0K lib64 16K lost+found 4.0K media 20K mnt 4.0K opt 0 proc 40K root 176K run 7.1M sbin 4.0K selinux 4.0K srv 0 sys 4.0K tmp 414M usr 356M var 0 vmlinuz 145G vol

  Read the article

• is there any way to enforce the 30 seconds limit on local appengine dev server?

  - by Alon Carmel

  Hey, i was wondering if there is a way to enforce the 30 seconds limit that is being enforced online at the appengine production servers to the local dev server? its impossible to test if i reach the limit before going production. maybe some django middlware?

  Read the article

• VirtualBox - split partitioned VDI into separate VDIs

  - by mathematical.coffee

  I'm very new to VirtualBox. I set up an Arch Linux VM and a Ubuntu VM (Ubuntu host), both sharing the same .vdi like so (I had in my mind a dual-boot situation): VDI file (25GB) |- /dev/sda1: 5GB (Arch Linux) |- /dev/sda2: [Ubuntu] |- /dev/sda5 (swap, 1GB) |- /dev/sda6 Ubuntu /, 9GB |- /dev/sda7 Ubuntu /home, 10GB I've now realised that I don't want a dual-boot-type setup, I'd rather boot each machine independently (my initial thought was to share /home between Ubunto and Arch). So, my question: Can I split /dev/sda1 and /dev/sda2 each to their own .vdi files so I can use them as completely separate machines? I'd rather not have to re-install either Arch (because it took me ages to work it out!) or Ubuntu (because I've already done a few GB of updates and don't want to redo them). I haven't been able to find anything about this - most questions I see are about converting a .vdi to a partition on the host, or splitting a .vdi into multiple smaller files (that are not independent), or converting a partition on the host to a .vdi file. cheers.

  Read the article

• Does anyone know of a GUI library for the IO language

  - by Dev er dev

  Io is a nice cross-platform prototype-based object-oriented language. Does anyone know of any GUI library for Io? Io's name does not make it Google friendly.

  Read the article

• df -h showing wrong output in GB

  - by Anurag Uniyal

  If I list df output for KB, MB and GB, they do not match e.g. $ df -k |grep xvdb /dev/xvdb1 12796048 732812 11413172 7% /xxx $ df -m |grep xvdb /dev/xvdb1 12497 716 11146 7% /xxx $ df -h |grep xvdb /dev/xvdb1 13G 716M 11G 7% /xxx 12796048 KB = 12496.14 MB so that is slight off but OK 12796048 KB = 12.2 GB, 12407 MB is also 12.2 GB so why df is showing 13 GB or am I missing something? Here is full df listing $ df -h Filesystem Size Used Avail Use% Mounted on /dev/xvda1 7.5G 1.7G 5.5G 24% / none 5.8G 128K 5.8G 1% /dev none 5.8G 0 5.8G 0% /dev/shm none 5.8G 44K 5.8G 1% /var/run none 5.8G 0 5.8G 0% /var/lock none 5.8G 0 5.8G 0% /lib/init/rw /dev/xvdb1 13G 716M 11G 6% /xxx Coreutils version seems to 7.4 as info coreutils shows This manual documents version 7.4 of the GNU core utilities,

  Read the article

• Ubuntu 12 Server messing up my hard disk

  - by Jeroen Jacobs

  I'm installing Ubuntu server on a disk with 12GB available. During the setup, I choose the default LVM-based partition layout. However for some reason, Ubuntu decides that it only wants to use 4GB of this disk. How do I reclaim the remaining space of the hard disk? "lvextent" doesn't work btw... output of df -h: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 4.3G 3.4G 754M 82% / udev 3.9G 4.0K 3.9G 1% /dev tmpfs 1.6G 756K 1.6G 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 0 3.9G 0% /run/shm /dev/sda1 228M 25M 192M 12% /boot output of pvdisplay: --- Physical volume --- PV Name /dev/sda5 VG Name ubuntu PV Size 12.32 GiB / not usable 2.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 3154 Free PE 8 Allocated PE 3146 PV UUID dD06RZ-kGcL-1tTX-Ruds-XIDG-ssMd-FIUkzZ my partitions: Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 26343423 12920833 5 Extended /dev/sda5 501760 26343423 12920832 8e Linux LVM when I try lvextent, it says there is not enough diskspace.

  Read the article

• chown: changing ownership of `.': Invalid argument

  - by Pierre

  I'm trying to install some new files on our new server while our sysadmin is in holidays: Here is my df # df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb3 273G 11G 248G 5% / tmpfs 48G 260K 48G 1% /dev/shm /dev/sdb1 485M 187M 273M 41% /boot xxx.xx.xxx.xxx:/commun 63T 2.2T 61T 4% /commun as root , I can create a new directory and run chown under /home/lindenb # cd /home/lindenb/ # mkdir X # chown lindenb X but I cannot run the same command under /commun # cd /commun/data/users/lindenb/ # mkdir X # chown lindenb X chown: changing ownership of `X': Invalid argument why ? how can I fix this ? updated: mount: /dev/sdb3 on / type ext4 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) /dev/sdb1 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) xxx.xx.xxx.xxx:/commun on /commun type nfs (rw,noatime,noac,hard,intr,vers=4,addr=xxx.xx.xxx.xxx,clientaddr=xxx.xx.xxx.xxx) version: $ cat /etc/redhat-release CentOS release 6.3 (Final)

  Read the article

• How can I translate Linux keycodes from /dev/input/event* to ASCII in Perl?

  - by Bogdan Constantinescu

  I'm writing a Perl script that reads data from the infamous /dev/input/event* and I didn't find a way to translate the key codes generated by the kernel into ASCII. I'm talking about the linux key codes in this table here and I can't seem to find something that would help me translate them without hardcoding an array into the script. Am I missing something? I'd like to skip the array part because it doesn't seem to be a good practice, so any idea? :)

  Read the article

• CentOS Insufficient space in download directory /var/cache/yum/base/packages

  - by Joao Heleno

  Hello! I was trying to yum install libpcap when I got Error Downloading Packages: 14:libpcap-0.9.4-15.el5.i386: Insufficient space in download directory /var/cache/yum/base/packages * free 0 * needed 108 k Here's output from df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda1 20G 19G 0 100% / /dev/sda3 202G 38G 154G 20% /home tmpfs 1.5G 0 1.5G 0% /dev/shm And fdisk -l: Disk /dev/sda: 250.0 GB, 250000000000 bytes 255 heads, 63 sectors/track, 30394 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 2611 20972826 83 Linux /dev/sda2 2612 3251 5140800 82 Linux swap / Solaris /dev/sda3 3252 30394 218026147+ 83 Linux I have launched yum clean all with no success clearing up space. Please advise. Thanks.

  Read the article

• traffic shaping for certain (local) users

  - by JMW

  Hello, i'm using ubuntu 10.10 i've a local backup user called "backup". :) i would like to give this user just a bandwidth of 1Mbit. No matter which software wants to connect to the network. this solution doesn't work: iptables -t mangle -A OUTPUT -p tcp -m owner --uid-owner 1001 -j MARK --set-mark 12 iptables -t mangle -A POSTROUTING -p tcp -m owner --uid-owner 1001 -j MARK --set-mark 12 tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 2 htb default 1 tc filter add dev eth0 parent 2: protocol ip pref 2 handle 50 fw classid 2:6 tc class add dev eth0 parent 2: classid 2:6 htb rate 10Kbit ceil 1Mbit tc qdisc show dev eth0 tc class show dev eth0 tc filter show dev eth0 does anyone know how to do it? thanks a lot in advance

  Read the article

• Haskell as REST server

  - by Dev er dev

  I would like to try Haskell on a smallish project which should be well suited to it. I would like to use it as a backend to a small ajax application. Haskell backend should be able to do authentication (basic, form, whatever, ...), keep track of user session (not much data there except for username) and to dispatch request to handlers based on uri and request type. It should also be able to serialize response to both xml and json format, depending on request parameter. I suppose the handlers are ideally suited for Haskell, since the service is basically stateless, but I don't know where to start for the rest of the story. Searching hackage didn't give me much hints.

  Read the article

• How to trace a raw (character) device stream on Unix ?

  - by Fabien

  I'm trying to trace what is transiting in a raw (character) device on an Unix system (ex: /dev/tty.baseband) for DEBUG purpose. I am thinking of creating a deamon that would: upon start rename /dev/tty.baseband to /dev/tty.baseband.old. create a raw node /dev/tty.baseband spawn two threads: Thread 1: reading /dev/tty.baseband.old writing into /dev/tty.baseband Thread 2: reading /dev/tty.baseband writing into /dev/tty.baseband.old This would work a little bit like a MITM process. I wonder if there is not a 'standard' way to do this.

  Read the article

• What is the /dev/shm equivalence in Windows System ?

  - by ablimit

  I was wondering how can I make the IO faster by writing and reading temporary files to main memory. I've used to write to /dev/shm in Linux. But now I'm in Windows 7. Anyone knows the answer ? Thanks

  Read the article

• svn working copy issue

  - by Marcin

  Hi guys I have an easy question, but not easy to me. I have a repo in /mnt/apps/repos and I would like to do a hook which will update/export everything to /mnt/apps/dev/repos folder but when running: #/usr/bin/svn update /mnt/apps/dev/repos I am getting error: Skipped '/mnt/webapps/dev/repos' when run #usr/bin/svn export /mnt/apps/dev/repos I am getting: svn: '/mnt/webapps/dev/repos' is not a working copy how to add /mnt/webapps/dev/repos as a working copy for all files from repo DB? please help

  Read the article

• Root partition full? CentOS

  - by Joao Heleno

  Hi! I'm running CentOS 5.4 and my / is full. I wanted to install gparted but in order to do that I must install Priorities and it's when I get an error saying / is full so I can't go forward. Here's some output: fdisk -l Disk /dev/sda: 250.0 GB, 250000000000 bytes 255 heads, 63 sectors/track, 30394 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 2611 20972826 83 Linux /dev/sda2 2612 3251 5140800 82 Linux swap / Solaris /dev/sda3 3252 30394 218026147+ 83 Linux df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 20315812 19365152 0 100% / /dev/sda3 211196248 49228164 151066780 25% /home tmpfs 1552844 0 1552844 0% /dev/shm I'm not using LVM. Please advise. Thanks

  Read the article

• Gparted: Copy Greyed Out

  - by David

  I booted my system to a gparted linux live CD and I have two partitions: /dev/sda1 /dev/sda2 I want to move both of them to my new physical hard drive (called /dev/sdb). When I right click on /dev/sda1, I can choose copy and then paste it onto /dev/sdb. When I right click on /dev/sda2, copy is greyed out and there is a yellow exclamation point to the left of the disk. I know that the disk works since I can boot my computer from it. Why won't gparted let me copy /dev/sda2 to my new hard disk? Since the option is greyed out, I don't even get an error message. Thanks!

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >