Search Results

Search found 4432 results on 178 pages for 'fail'.

Page 41/178 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • Dirty Cache Dell Equallogic Storage Array

    - by Jermal Smith
    has anyone ever run into a dirty cache issue with a Equallogic SAN. Even after replacement of the controller cards in the Equallogic Storage Array fails offline with a dirty cache. I have listed steps here on my blog to bring the SAN online again, however this is not the best solution as it continues to fail. http://jermsmit.com/dirty-cache-dell-equallogic-storage-array/ If you have any info on this please share. Thanks, Jermal

    Read the article

  • Raid 11 : how to stop @ how to release devices

    - by santhosha
    #cat /proc/mdstat md7 : active raid10 sdh1[2] 286743936 blocks 64K chunks 2 near-copies [4/1] [__U_] [0:0:3:0] #mdadm -f /dev/md7 /dev/sdh1 mdadm: set /dev/sdh1 faulty in /dev/md7 #mdadm -r /dev/md7 /dev/sdh1 mdadm: hot remove failed for /dev/sdh1: Device or resource busy # umount /dev/md7 umount: /dev/md7: not mounted #mdadm --stop /dev/md7 mdadm: fail to stop array /dev/md7: Device or resource busy #cat /proc/mdstat md7 : active raid10 sdh1[2] 286743936 blocks 64K chunks 2 near-copies [4/1] [__U_] [0:0:3:0]

    Read the article

  • Can SPF records contain domain name wildcards?

    - by deltanovember
    Part of my SPF record contains: include:google.com I'm still getting soft fail because the actual e-mail is delivered by the following Received: from mail-yx0-f172.google.com (mail-yx0-f172.google.com [209.85.213.172] Which has a completely different IP from google.com. However I don't want to put in mail-yx0-f172.google.com because it might be dynamic. Is there some equivalent of *.google.com that I can use in the record

    Read the article

  • Tomcat deploy error

    - by David
    When deploying an application with the Tomcat manager I get the following error: FAIL - Failed to deploy application at context path /prademo Tomcat log shows: INFO: HTMLManager: install: Installing context configuration at '/home//webapps/PRA/META-INF/context.xml' from '/home//webapps/PRA' java.io.FileNotFoundException: /home/dstefan/webapps/PRA/META-INF/context.xml (Permission denied) Permission to what? Both PRA and contex.xml have -rwxrwxrwx. Thanks!

    Read the article

  • 2 SAN disks failing during the same overnight period

    - by Carl
    We have 2 HP Lefthand SAN servers in separate data rooms. Last week each of the SANs had 1 hard disk fail. They were in different positions on the SANs. Both data rooms are very well protected from power issues with UPS. Any ideas of what could have influenced this? Thanks, Carl

    Read the article

  • Forms authentication failed between web server and sql server

    - by Matt Bear
    I've actually found the solution, but I'm trying to understand why it failed, and why my solution fixed the problem. We have an application that uses forms authentication between a web server and sql server, web server runs server 2008, sql server runs 2008 r2, and sql server 2008. In august the sql server was patched with .net 3.5.1, the web server was untouched, and the forms authentication continued to work. 1 week ago we virtualized the web server onto our vSphere server because of failing hardware. Afterwards the form authentication failed with event code 4005, detail code 50201, The ticket supplied was invalid (on the sql server). In fact the sql server started generating Schannel errors and began blue screening 3-4 times a day. At this point I touched the sql server for the first time(ever), the errors were non specific, any reference to them I could find had to do with either zone alarm(which we don't run), or memory errors. So I applied service pack 1, which stopped the blue screening, but did not fix the forms authentication. At this point we had a work around, so we put it on the back burner while we completed another project, and I was able to get back on it last night. First thing was to adjust some code in the webconfig file on the sql server, nothing, next was regenerate and change out the machine key, still no change. Update the DNS servers, no change. Finally I went through and installed all windows updates, two reboots, (over RDP installed a network card driver which failed, and did not have my server room key, that was fun). After that, forms authentication was working again. And the sql server stopped generating as many errors, I've gotten two schannel errors since then. In short, forms authentication began failing when the web server was cloned onto a virtual machine, which caused the sql server to blue sceen? and forms authentication to fail. And could only be fixed by applying patches to the sql server?(I'm wishing I had patched the servers one at a time so I could know for sure which patch on which server fixed it). My question is why did it fail, and why did patching fix it? I hate fixing something without fully understanding the why and how.

    Read the article

  • DNS with Amazon EC2 Elastic Load Balancer

    - by user68173
    I'm told that I can't make the root of a domain (example.com) a CNAME - I have to specify an IP. Given that you can't use an IP address to point at your Elastic Load Balancer, what's the best thing to do? Currently I do this: example.com - A record to elastic IP of first server- redirects to www.example.com www.example.com CNAME to hostname of load balancer If the first server is out of action, the redirect will fail. Is there a better way to approach this?

    Read the article

  • Unable to start rabbitmq-server on Ubuntu 12.04

    - by lxyu
    I try to install rabbitmq-server on ubuntu-server 12.04 but failed. Then I add the apt source list following the guide in http://www.rabbitmq.com/install-debian.html But reinstall still have the same error as following: $ sudo aptitude install rabbitmq-server ... Setting up rabbitmq-server (2.8.7-1) ... * Starting message broker rabbitmq-server * FAILED - check /var/log/rabbitmq/startup_\{log, _err\} ...fail! invoke-rc.d: initscript rabbitmq-server, action "start" failed. dpkg: error processing rabbitmq-server (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: rabbitmq-server E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up rabbitmq-server (2.8.7-1) ... * Starting message broker rabbitmq-server * FAILED - check /var/log/rabbitmq/startup_\{log, _err\} ...fail! invoke-rc.d: initscript rabbitmq-server, action "start" failed. dpkg: error processing rabbitmq-server (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: rabbitmq-server And error log seems show nothing useful neither: # startup_err shows this Crash dump was written to: erl_crash.dump Kernel pid terminated (application_controller) ({application_start_failure,kernel,{shutdown,{kernel,start,[normal,[]]}}}) # startup_log shows this {error_logger,{{2012,10,10},{22,31,54}},"Protocol: ~p: register error: ~p~n",["inet_tcp",{{badmatch,{error,epmd_close}},[{inet_tcp_dist,listen,1},{net_kernel,start_protos,4},{net_kernel,start_protos,3},{net_kernel,init_node,2},{net_kernel,init,1},{gen_server,init_it,6},{proc_lib,init_p_do_apply,3}]}]} {error_logger,{{2012,10,10},{22,31,54}},crash_report,[[{initial_call,{net_kernel,init,['Argument__1']}},{pid,<0.20.0>},{registered_name,[]},{error_info,{exit,{error,badarg},[{gen_server,init_it,6},{proc_lib,init_p_do_apply,3}]}},{ancestors,[net_sup,kernel_sup,<0.9.0>]},{messages,[]},{links,[#Port<0.90>,<0.17.0>]},{dictionary,[{longnames,false}]},{trap_exit,true},{status,running},{heap_size,610},{stack_size,24},{reductions,511}],[]]} {error_logger,{{2012,10,10},{22,31,54}},supervisor_report,[{supervisor,{local,net_sup}},{errorContext,start_error},{reason,{'EXIT',nodistribution}},{offender,[{pid,undefined},{name,net_kernel},{mfargs,{net_kernel,start_link,[[rabbitmqprelaunch18417,shortnames]]}},{restart_type,permanent},{shutdown,2000},{child_type,worker}]}]} {error_logger,{{2012,10,10},{22,31,54}},supervisor_report,[{supervisor,{local,kernel_sup}},{errorContext,start_error},{reason,shutdown},{offender,[{pid,undefined},{name,net_sup},{mfargs,{erl_distribution,start_link,[]}},{restart_type,permanent},{shutdown,infinity},{child_type,supervisor}]}]} {error_logger,{{2012,10,10},{22,31,54}},std_info,[{application,kernel},{exited,{shutdown,{kernel,start,[normal,[]]}}},{type,permanent}]} {"Kernel pid terminated",application_controller,"{application_start_failure,kernel,{shutdown,{kernel,start,[normal,[]]}}}"} I have googled for some time but got nothing useful. One solution on the internet is to make sure hostname pingable, but my /etc/hosts already have this line on top: 127.0.0.1 localhost myserver Any suggestion on how to get up rabbitmq-server?

    Read the article

  • VirtualBox 4.1.12 Ubuntu Host Bridged Networking

    - by hidden_premise
    Setup Ubuntu Server 11.10 x64 VirtualBox 4.1.12 One network adapter eth0 with a static IP address My /etc/network/interfaces looks like #Local loopback auto lo iface lo inet loopback #Primary Interface auto eth0 iface eth0 inet static address 10.0.0.6 netmask 255.255.255.0 gateway 10.0.0.1 Need Static IP for Ubuntu Host Static IP for multiple Ubuntu guests My attempt Downloaded the .deb for 64bit virtual box dpkg -i virtualbox.deb Create a VM and install ubuntu server 11.10 x64 from ISO Set the networking mode to bridged and choose 'eth0' as the interface Fail. None of the guides I can find for bridged networking work because everything changed since vbox 2

    Read the article

  • Testing HTTP status codes

    - by amusero
    I'm running an Apache Tomcat server. Making some security testing I'd noticed than my server is returning a 200 HTTP status code of the default error page when I try to access to a non-existent element instead of return a 404 status code and redirect me to the default error page. I suspect that this is not the only fail with this issue. Anyone can suggest me a process to chech the most common HTTP status codes?

    Read the article

  • Lock ups, crashing, transferring files using TrueCrypt with iSCSI

    - by Anthony
    I have looked into this error and it seems that it hasn't been discussed yet - or at least I can't find any information relating. I'm having issues transferring files, usually larger files over a couple of hundred MB. Here is the setup: QNAP 410 as iSCSI Target with multiple LUNs. (CRC is turned on (Data Digest and Header Digest) Server 2003 with iSCSI Initiator version 2.08 - build 3825 (I'm copying files from anothe machine to shares on Server 2003 = into TrueCrypt volume ergo onto the NAS) I have mounted the LUN and formatted it with TrueCrypt using NTFS (Full format, not a quick one). What happens is some files, mainly RAR/Compressed files, appear as if they copy but fail. I've tested this in a number of ways and can repeat the process every time. So I thought to check transfer over iSCSI without TrueCrypt in between, a plain NTFS format - no problem at all. So it would seem TrueCrypt is at least part of the problem here. I haven't tried copying directly from the server yet, I will try that. I also haven't tried it without CRC but fail to see how that would affect this. I will update with my findings later. In the meantime does anyone have any ideas as to what could be wrong? Thanks for your time. Update: I copied a set of files, the ones I was having issues with, to the server then from there I copied those into two places within the TrueCrypt volume (Mounted on the NAS). A seperate directory create in the root of the volume The same initial directory I was using in the first instance Both worked fine. So it now seems clear that this is a link between TrueCrypt, iSCSI and Windows Shares. I say this because I originally setup the whole system using TrueCrypt volume files, not iSCSI. I changed it as it didn't suit my requirements - day wasted as well. While I had this setup though I copied my entire file set to the volume files and all files copied without error - over the network, from a pc, to the server where TrueCrypt had the volume files mounted from the NAS. I didn't bother turning off CRC on the iSCSI system as I highly doubt that is the cause in light of this finding. So any ideas?

    Read the article

  • Hylafax / Capi4hylafax: faxgetty does not recognize number of lines

    - by Wrikken
    We've got a T.30 card, 30 working lines on it, but for some reason, if I add more then 30 faxes in the queue at any time (and we're busy enough at peak times that this happens a lot), faxgetty sends faxes to non-existent lines and they appear in the error queue as a 'busy' signal on the line, which results in a lot of failed faxes because the counter of max 3 tries increases rapidly. This is using faxgetty (USE_FAXGETTY="y" in /etc/default/hylafax). I've inherited this thing, so I'm not entirely sure how faxgetty is supposed to know the number of lines. However, if I alter the script to faxmodem (USE_FAXGETTY="n" in /etc/default/hylafax and manually enabling 30 modems), this behavior goes away (new faxes 'wait' for a line to be available before trying to send, so each try / fail is a valid one on a working line, majorly descreasing the amount of failed faxes. However, when researching this almost anyone talks about faxgetty being the preferred, more robust, method, and on top of that for some unexplained reason all FIFO's disappeared for some reason after several errorless hours with faxmodem, forcing a hylafax restart using faxgetty until we figured out why this faxmodem solution failed (which is another question, and somewhat out of scope here). Environment: Debian 2.6.26-2-amd64 capi4hylafax 1:01.03.00.99.svn.300-12 hylafax-client 2:4.4.4-10.1 hylafax-server 2:4.4.4-10.1 Config --hfaxd.conf-- LogFacility: daemon ServerTracing: 0x1ff --hyla.conf-- Host: localhost Verbose: No VRes: 196 TimeZone: local DialRules: "/etc/hylafax/dialrules.europe" --/etc/hylafax/config -- InternationalPrefix: 00 LongDistancePrefix: 0 AreaCode: 99999 CountryCode: 31 DialStringRules: "etc/dialrules.europe" ModemGroup: any:faxCAPI SendFaxCmd: "/usr/bin/wrapc2faxsend" --/etc/hylafax/config.faxCAPI -- SpoolDir: /var/spool/hylafax FaxRcvdCmd: /var/spool/hylafax/bin/faxrcvd PollRcvdCmd: /var/spool/hylafax/bin/pollrcvd FaxReceiveUser: uucp FaxReceiveGroup: dialout LogFile: /var/spool/hylafax/log/capi4hylafax #no, checking this log did not yield anything interesting LogTraceLevel: 4 LogFileMode: 0600 ModemGroup: any:faxCAPI #repeats of faxCAPI2 = faxCAPI30, with of course another devicename/local ident: { HylafaxDeviceName: faxCAPI RecvFileMode: 0600 FAXNumber: ****redacted**** LocalIdentifier: ****some-ident-per-device*** MaxConcurrentRecvs: 0 OutgoingController: 1 OutgoingMSN: SuppressMSN: 0 NumberPrefix: NumberPlusReplacer: "00" UseISDNFaxService: 0 RingingDuration: 0 { Controller: 1 AcceptSpeech: 0 UseDDI: 0 DDIOffset: DDILength: 0 IncomingDDIs: IncomingMSNs: AcceptGlobalCall: 1 } } So in short: How does faxgetty determine the number of lines available? (the man page isn't terribly revealing, and I can't find an appropriate setting in hylafax-config. And how can I get a capi4hylafax/hylafax setup which queues more faxes then lines are available correctly without immediately incrementing the fail count? We will not be receiving any faxes on this machine b.t.w. As I said, I've inherited this thing, so if there are important configuration options I'm not including, please let me know.

    Read the article

  • PHP FastCGI/XML/DOM Configure

    - by James
    Guys, any ideas why when I configure PHP 5.3.1, these options fail? Notice: Following unknown configure options were used: --with-xml --with-dom --enable-fastcgi --enable-discard-path --enable-force-cgi-redirect

    Read the article

  • Drive Genius says: "Invalid catalog btree reverse link in node" is this fixable?

    - by bencnscp
    No obvious problems with my Mac OS X 10.5 system, but Drive Genius 1.5.1 says: "Invalid catalog btree reverse link in node" when doing a "Verify" The "repair" and "rebuild" options fail. I did some googling, and the consensus as: 1- Drive Genius is slightly better than Disk Warrior 2- This problem is likely not fixable. My assumed solution is that I should do a full backup and re-format.

    Read the article

  • Hard disk with trustworthy SMART support

    - by Paggas
    Which hard disk drive do you suggest with trustworthy SMART diagnostics? That is, a hard disk that can truthfully report sector reallocations and other pre-failure indicators. I'm asking this because I have seen quite a few hard disks with SMART support fail with no warning in the SMART diagnostics, so a hard drive that can report such problems with some degree of reliability would be much appreciated :)

    Read the article

  • Vagrant reporting VirtualBox guest additions out of date

    - by DTest
    Fairly new to Vagrant, so bear with me if I don't understand the process. I downloaded a CentOS box off http://www.vagrantbox.es/ Started it up running VirtualBox 4.2.4 and got this message: [default] The guest additions on this VM do not match the install version of VirtualBox! This may cause things such as forwarded ports, shared folders, and more to not work properly. If any of those things fail on this machine, please update the guest additions and repackage the box. Guest Additions Version: 4.0.8 VirtualBox Version: 4.2.4 So I used the vbguest plugin to update the guest additions, then repackaged the box as suggested. Having replaced the old box and loading it up I get the same message about guest additions being outdated, but vbguest reports that they are up to date (the automatic vbguest update is disabled in my Vagrantfile): Vagrant::Config.run do |config| config.vm.box = "centos56_64" config.vbguest.auto_update = false config.vbguest.no_remote = true end And the commands: dtest$ vagrant up [default] Importing base box 'centos56_64'... [default] The guest additions on this VM do not match the install version of VirtualBox! This may cause things such as forwarded ports, shared folders, and more to not work properly. If any of those things fail on this machine, please update the guest additions and repackage the box. Guest Additions Version: 4.0.8 VirtualBox Version: 4.2.4 [default] Matching MAC address for NAT networking... [default] Clearing any previously set forwarded ports... [default] Forwarding ports... [default] -- 22 => 2222 (adapter 1) [default] Creating shared folders metadata... [default] Clearing any previously set network interfaces... [default] Booting VM... [default] Waiting for VM to boot. This can take a few minutes. [default] VM booted and ready for use! [default] Mounting shared folders... [default] -- v-root: /vagrant dtest$ vagrant vbguest --no-install [default] Detected Virtualbox Guest Additions 4.2.4 --- OK. [default] Virtualbox Guest Additions on host: 4.2.4 - guest's version is 4.2.4 Since they appear to be updated after an install, I could ignore the message. But is it possible to get rid of it?

    Read the article

  • Should I buy matching hard drives for a NAS RAID 1 array?

    - by Jamie Ide
    I'm planning to buy a NAS (network attached storage) box and I've picked the Synology DS209. I want to set up a RAID 1 array and I'm wondering if I should buy a matching pair of hard drives or if it would be better to buy from different manufacturers. I'm concerned that a matching pair would be more likely to fail at the same time.

    Read the article

  • Are there any scripts to synchronize sites?

    - by Matrym
    I've just set up a fail-over DNS to switch the site to a second host if the first is down. This is great for showing an old / archived version of the site, but I suspect maintenance is going to be a real pain. I moved the files over with rsync in the first place. Is this the kinda thing that could be run as a cron job, automatically moving over newer files?

    Read the article

  • How to: mirror a staging server from a production server

    - by Zombies
    We want to mirror our current production app server (Oracle Application Server) onto our staging server. As it stands right now, various things are out of sync, and what may work in testing/QA can easily fail in production because of settings/patch/etc inconsistencies. I was thinking what would be best is to clone the entire disk daily and push it onto the staging server... Would this be the best method...? (note: these are all windows servers)

    Read the article

  • What is a good, inexpensive, non-host-based printer

    - by Josh Yeager
    I am sick of buying cheap host-based printers that have bloated drivers, randomly fail to print, and won't work over a network. Is it possible to get a good color network printer for under $200 that doesn't have those problems? I don't care if it's laser or inkjet; I don't print enough for the ink cost to matter. I just want something that I can plug into my network, set up sharing on my PCs, and forget about.

    Read the article

  • Oracle on windows cluster with online/offline IPs

    - by yzador
    I have a windows cluster (on windows 2008 server) with nodes in different subnets. So cluster has two IPs, one for each node (I'm talking not about node IP, but about cluster IP). One is online, the other is offline. Is it possible to run Oracle Fail Safe on this configuration? I've tried to install it, but it gives me the following error when trying to verify group or add database to group: FS-10220: Network name maps to IP address in the cluster resource but maps to IP address on the system

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >