Search Results

Search found 1348 results on 54 pages for 'floating accuracy'.

Page 41/54 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • Block-level deduplicating filesystem

    - by James Haigh
    I'm looking for a deduplicating copy-on-write filesystem solution for general user data such as /home and backups of it. It should use online/inline/synchronous deduplication at the block-level using secure hashing (for negligible chance of collisions) such as SHA256 or TTH. Duplicate blocks need not even touch the disk. The idea is that I should be able to just copy /home/<user> to an external HDD with the same such filesystem to do a backup. Simple. No messing around with incremental backups where corruption to any of the snapshots will nearly always break all later snapshots, and no need to use a specific tool to delete or 'checkout' a snapshot. Everything should simply be done from the file browser without worry. Can you imagine how easy this would be? I'd never have to think twice about backing-up again! I don't mind a performance hit, reliability is the main concern. Although, with specific implementations of cp, mv and scp, and a file browser plugin, these operations would be very fast, especially when there is a lot of duplication as they would only need to transfer the absent blocks. Accidentally using conventional copy tools that do not integrate with the FS would merely take longer, waste some bandwidth when copying remotely and waste some CPU, as the duplicate data would be re-read, re-transferred and re-hashed (although nothing would be re-written), but would absolutely not corrupt anything. (Some filesharing software may also be able to benefit by integrating with the FS.) So what's the best way of doing this? I've looked at some options: lessfs - Looks unmaintained. Any good? [Opendedup/SDFS][3] - Java? Could I use this on Android?! What does [SDFS][4] stand for? [Btrfs][5] - Some patches floating around on mailing list archives, but no real support. [ZFS][6] - Hopefully they'll one day relicense under a true Free/Opensource GPL-compatible licence. Also, 2 years ago I had a go at an attempt in Python using Fuse at the file-level to be used over the top of a typical solid FS such as EXT4, but I found Fuse for Python underdocumented and didn't manage to implement all of the system calls. My first post here, so I can't post more than 2 links until I get over 10 rep: [3]: http://www.opendedup.org/ [4]: https://en.wikipedia.org/w/index.php?title=SDFS&action=edit&redlink=1 [5]: https://en.wikipedia.org/wiki/Btrfs#Features [6]: https://en.wikipedia.org/wiki/ZFS#Linux

    Read the article

  • Oracle R Distribution 3.1.1 Released

    - by Sherry LaMonica-Oracle
    Oracle R Distribution version 3.1.1 has been released to Oracle's public yum today. R-3.1.1 (code name "Sock it to Me") is an update to R-3.1.0 that consists mainly of bug fixes. It also includes enhancements related to accessing package help files, improved accuracy when importing data with large integers, and better integration with RStudio graphics. The full list of new features and bug fixes is listed in the NEWS file.To install Oracle R Distribution using yum, follow the instructions in the Oracle R Enterprise Installation and Administration Guide.Installing using yum will resolve any operating system dependencies automatically. As such, we recommend using yum to install Oracle R Distribution. However, if yum is not available, you can install Oracle R Distribution RPMs directly using RPM commands.For Oracle Linux 5, the Oracle R Distribution RPMs are available in the Enterprise Linux Add-Ons repository:  R-3.1.1-1.el5.x86_64.rpm   R-core-3.1.1-1.el5.x86_64.rpm  R-devel-3.1.1-1.el5.x86_64.rpm  libRmath-3.1.1-1.el5.x86_64.rpm  libRmath-devel-3.1.1-1.el5.x86_64.rpm  libRmath-static-3.1.1-1.el5.x86_64.rpm For Oracle Linux 6, the Oracle R Distribution RPMs are available in the Oracle Linux Add-Ons repository:  R-3.1.1-1.el6.x86_64.rpm  R-core-3.1.1-1.el6.x86_64.rpm  R-devel-3.1.1-1.el6.x86_64.rpm  libRmath-3.1.1-1.el6.x86_64.rpm  libRmath-devel-3.1.1-1.el6.x86_64.rpm  libRmath-static-3.1.1-1.el6.x86_64.rpmFor example, this command installs the R 3.1.1 RPM on Oracle Linux x86-64 version 6:  rpm -i R-3.1.1-1.el6.x86_64.rpm To complete the Oracle R Distribution 3.1.1 installation, repeat this command for each of the 6 RPMs, resolving dependencies as required. Oracle R Distribution 3.1.1 is not yet officially certified with Oracle R Enterprise. Refer to Table 1-2 in the Oracle R Enterprise Installation Guide for supported configurations of Oracle R Enterprise components, or check this blog for updates. The Oracle R Distribution 3.1.1 binaries for Windows, AIX, Solaris SPARC and Solaris x86 will be available on OSS, Oracle's Open Source Software portal, in the coming weeks.

    Read the article

  • Why is my arrow texture being drawn in odd places?

    - by tyjkenn
    This is a script I wrote that places an arrow on the screen, pointing to an enemy off-screen, or, if the enemy is on-screen, it places an arrow hovering above the enemy. Everything seems to work, except for some odd reason, I see random arrows floating around, often skewed and resized (which I really don't understand, because I only rotate and place in this script). Even when I only have one enemy in the scene, I still see these random arrows. It should only be drawing one per enemy. Note: when all enemies are removed, no arrows appear. var arrow : Texture; var cam : Camera; var dim : int = 30; function OnGUI() { var objects = GameObject.FindGameObjectsWithTag("Enemy"); for(var ob : GameObject in objects) { var pos = cam.WorldToViewportPoint(ob.transform.position); if(gameObject.GetComponent(FollowCamera).target != null){ var tar = gameObject.GetComponent(FollowCamera).target.parent; } if(pos.z>1 && ob.transform != tar){ var xDiff = (pos.x*cam.pixelWidth)-(cam.pixelWidth/2); var yDiff = (pos.y*cam.pixelHeight)-(cam.pixelHeight/2); var angle = Mathf.Rad2Deg*Mathf.Atan(yDiff/xDiff)+180; if(xDiff>0) angle += 180; var dist = Mathf.Sqrt(xDiff*xDiff + yDiff*yDiff); var slope = yDiff/xDiff; var camSlope = cam.pixelHeight/cam.pixelWidth; var theX = -1000.0; var theY = -1000.0; var mult = 0; var temp; if(Mathf.Abs(xDiff)>(cam.pixelWidth/2)||Mathf.Abs(yDiff)>(cam.pixelHeight/2)){ //touching right if(slope<camSlope && slope>-camSlope) { if(xDiff>(cam.pixelWidth/2)) { theX = cam.pixelWidth - (dim/2); mult = -1; }else if(xDiff<-(cam.pixelWidth/2)) { theX = (dim/2); mult = 1; } temp = ((cam.pixelWidth/2)*yDiff)/xDiff; theY =(cam.pixelHeight/2)+(mult*temp); } else{ if(yDiff>(cam.pixelHeight/2)) { theY = (dim/2); mult = 1; }else if(yDiff<-(cam.pixelHeight/2)) { theY = cam.pixelHeight - (dim/2); mult = -1; } temp = ((cam.pixelHeight/2)*xDiff)/yDiff; theX =(cam.pixelWidth/2)+(mult*temp); } } else { angle = -90; theX = (cam.pixelWidth/2)+xDiff; theY = (cam.pixelHeight/2)-yDiff-dim; } GUIUtility.RotateAroundPivot(-angle, Vector2(theX, theY)); Graphics.DrawTexture(Rect(theX-(dim/2),theY-(dim/2),dim,dim),arrow,null); GUIUtility.RotateAroundPivot(angle, Vector2(theX, theY)); } } }

    Read the article

  • The Minimalist's Approach to Content Governance

    - by Kellsey Ruppel
    This week on the blog, we want to focus on the content lifecylce and how important it is to have the tools in place to be able to properly manage all te phases of the content lifecylce. John Brunswick has some great advice when it comes to this topic, so expect to hear a lot from him this week! Originally posted by John Brunswick. Let's be honest - content governance is far from an exciting topic. BUT the potential of a very small intranet team creating and maintaining a platform that provides an organization with relevant, high value information, helping workers to get their jobs done with greater accuracy and in less time is exciting. It is easy to quickly start producing content, but the challenge is ensuring that the environment is easy to navigate and use on the third week and during the third year.   What can be done to bridge this gap? Over the next few blog entries let's take a pragmatic, minimalistic view of a process that can help any team manage a wealth of unstructured information. Based on an earlier article that I wrote around Portal Governance, I am going to focus on using technology as much as possible to support the governance of content with minimal involvement from users. The only certainty about content production is that business users are not fans of maintaining content. Maintenance is overhead and is a long-term investment thats value will possibly not be realized under the current content creator's watch. To add context to how we will use technical tools in this process, each post will highlight one section of the content lifecycle process as outlined below Content Lifecycle Stages 1. Request - Understand the education, purpose, resource and success criteria for content 2. Create - Determine access and workflow for content 3. Manage - Understand ownership and review cycles 4. Retire - Act on thresholds established during the request stage Within each state we will also elaborate as to 1. Why - why would we entertain doing this? 2. How - the steps that are needed to make it happen 3. Impact - what is the net benefit or loss based on the process Over the course of this week, we will dive deep into the stages and the minimal amount of time, effort and process within each to make some meaningful gains in the improvement of user experience and productivity in their search for information. It might be a stretch to say that we can make content governance exciting, but hopefully it can end up being painless and paying dividends. And if you'd like to hear first hand from a customer that is managing their content lifecycle with Oracle WebCenter, be sure to join us on Wednesday for this webcast "ResCare Solves Content Lifecycle Challenges with Oracle WebCenter"!

    Read the article

  • StringBuffer behavior in LWJGL

    - by Michael Oberlin
    Okay, I've been programming in Java for about ten years, but am entirely new to LWJGL. I have a specific problem whilst attempting to create a text console. I have built a class meant to abstract input polling to it, which (in theory) captures key presses from the Keyboard object and appends them to a StringBuilder/StringBuffer, then retrieves the completed string after receiving the ENTER key. The problem is, after I trigger the String return (currently with ESCAPE), and attempt to print it to System.out, I consistently get a blank line. I can get an appropriate string length, and I can even sample a single character out of it and get complete accuracy, but it never prints the actual string. I could swear that LWJGL slipped some kind of thread-safety trick in while I wasn't looking. Here's my code: static volatile StringBuffer command = new StringBuffer(); @Override public void chain(InputPoller poller) { this.chain = poller; } @Override public synchronized void poll() { //basic testing for modifier keys, to be used later on boolean shift = false, alt = false, control = false, superkey = false; if(Keyboard.isKeyDown(Keyboard.KEY_LSHIFT) || Keyboard.isKeyDown(Keyboard.KEY_RSHIFT)) shift = true; if(Keyboard.isKeyDown(Keyboard.KEY_LMENU) || Keyboard.isKeyDown(Keyboard.KEY_RMENU)) alt = true; if(Keyboard.isKeyDown(Keyboard.KEY_LCONTROL) || Keyboard.isKeyDown(Keyboard.KEY_RCONTROL)) control = true; if(Keyboard.isKeyDown(Keyboard.KEY_LMETA) || Keyboard.isKeyDown(Keyboard.KEY_RMETA)) superkey = true; while(Keyboard.next()) if(Keyboard.getEventKeyState()) { command.append(Keyboard.getEventCharacter()); } if (Framework.isConsoleEnabled() && Keyboard.isKeyDown(Keyboard.KEY_ESCAPE)) { System.out.println("Escape down"); System.out.println(command.length() + " characters polled"); //works System.out.println(command.toString().length()); //works System.out.println(command.toString().charAt(4)); //works System.out.println(command.toString().toCharArray()); //blank line! System.out.println(command.toString()); //blank line! Framework.disableConsole(); } //TODO: Add command construction and console management after that } } Maybe the answer's obvious and I'm just feeling tired, but I need to walk away from this for a while. If anyone sees the issue, please let me know. This machine is running the latest release of Java 7 on Ubuntu 12.04, Mate desktop environment. Many thanks.

    Read the article

  • C Programming arrays, I dont understand how I would go about making this program, If anyone can just guide me through the basic outline please :) [on hold]

    - by Rashmi Kohli
    Problem The temperature of a car engine has been measured, from real-world experiments, as shown in the table and graph below: Time (min) Temperature (oC) 0 20 1 36 2 61 3 68 4 77 5 110 Use linear regression to find the engine’s temperature at 1.5 minutes, 4.3 minutes, and any other time specified by the user. Background In engineering, many times we measure several data points in an experiment, but then we need to predict a value that we have not measured which lies between two measured values, such as the problem statement above. If the relation between the measured parameters seems to be roughly linear, then we can use linear regression to find the relationship between those parameters. In the graph of the problem statement above, the relation seems to be roughly linear. Hence, we can apply linear regression to the above problem. Assuming y {y0, y1, …yn-1} has a linear relation with x {x0, x1, … xn-1}, we can say that: y = mx+b where m and b can be found with linear regression as follows: For the problem in this lab, using linear regression gives us the following line (in blue) compared to the measured curve (in red). As you can see, there is usually a difference between the measured values and the estimated (predicted) values. What linear regression does is to minimize those differences and still give us a straight line (blue). Other methods, such as non-linear regression, are also possible to achieve higher accuracy and better curve fitting. Requirements Your program should first print the table of the temperatures similar to the way it’s printed in the problem statement. It should then calculate the temperature at minute 1.5 and 4.3 and show the answers to the user. Next, it should prompt the user to enter a time in minutes (or -1 to quit), and after reading the user’s specified time it should give the value of the engine’s temperature at that time. It should then go back to the prompt. Hints •Use a one dimensional array to store the temperature values given in the problem statement. •Use functions to separate tasks such as calculating m, calculating b, calculating the temperature at a given time, printing the prompt, etc. You can then give your algorithm as well as you pseudo code per function, as opposed to one large algorithm diagram or one large sequence of pseudo code.

    Read the article

  • Threads slowing down application and not working properly

    - by Belgin
    I'm making a software renderer which does per-polygon rasterization using a floating point digital differential analyzer algorithm. My idea was to create two threads for rasterization and have them work like so: one thread draws each even scanline in a polygon and the other thread draws each odd scanline, and they both start working at the same time, but the main application waits for both of them to finish and then pauses them before continuing with other computations. As this is the first time I'm making a threaded application, I'm not sure if the following method for thread synchronization is correct: First of all, I use two global variables to control the two threads, if a global variable is set to 1, that means the thread can start working, otherwise it must not work. This is checked by the thread running an infinite loop and if it detects that the global variable has changed its value, it does its job and then sets the variable back to 0 again. The main program also uses an empty while to check when both variables become 0 after setting them to 1. Second, each thread is assigned a global structure which contains information about the triangle that is about to be rasterized. The structures are filled in by the main program before setting the global variables to 1. My dilemma is that, while this process works under some conditions, it slows down the program considerably, and also it fails to run properly when compiled for Release in Visual Studio, or when compiled with any sort of -O optimization with gcc (i.e. nothing on screen, even SEGFAULTs). The program isn't much faster by default without threads, which you can see for yourself by commenting out the #define THREADS directive, but if I apply optimizations, it becomes much faster (especially with gcc -Ofast -march=native). N.B. It might not compile with gcc because of fscanf_s calls, but you can replace those with the usual fscanf, if you wish to use gcc. Because there is a lot of code, too much for here or pastebin, I created a git repository where you can view it. My questions are: Why does adding these two threads slow down my application? Why doesn't it work when compiling for Release or with optimizations? Can I speed up the application with threads? If so, how? Thanks in advance.

    Read the article

  • ADSL throughput loss from Reed-Solomon encoding

    - by javano
    I'm reading about ADSL starting here and I am confused by how the Reed-Solomon encoding for ECC is limiting the available transfer rate, as much as it does (nearly half). This pdf on the same subject contains the following; A maximum of 255 sub-carriers can be used to modulate data in the downstream direction. Sub-carrier 256, the downstream Nyquist frequency, and sub-carrier 64, the downstream pilot frequency, are not available for user data, thus limiting the total number of available downstream sub-carriers to 254. Each of these 254 sub-carriers can support the modulation of 0 to 15 bits. Since the ADSL DMT data frame rate is 4000 frames per second, the maximum theoretical downstream data rate of an ADSL system is 15.24Mbps. Due to limitations in system architecture, specifically the maximum allowable Reed-Solomon codeword size (255 bytes), the maximum achievable downstream data rate is 8.16Mbps. How is this nearly halving the throughput? Is all that extra bandwidth overhead of the RS encoding? 15240000 bps (15.24Mbps) - 8160000 bps (8.12Mbps) = 7080000 bps (7.08Mbps). Where has that 7Mbps of throughput gone? EDIT: I tried to read the wiki page on Reed-Soloman but it's all crazy maths and algerbra, which I don't understand. I can understand that data is split into 255 byte codewords, because that maybe the max codeword size whilst still maintaining accuracy during transmission; But I don't understand why that means less data is sent?

    Read the article

  • How do you get Windows 7 to show time remaining in the battery meter?

    - by MrDaniel
    Running Microsoft Windows 7 Home Premium on a HP Laptop. The system tray power meter never shows the time remaining in the system tray. Only really ever show a percentage remaining number as pictured. The windows help documentation on the "battery meter" seems to indicate that it should display a time remaining indicator, is this accurate? How accurate is the battery meter? The accuracy of what the battery meter reports—what percentage of a full charge remains and how long you can use your laptop before you must plug it in—depends on several factors. Most of these factors fall into the following two categories: What you use the laptop for. Because some activities drain the battery faster than others (for example, watching a DVD consumes more power than reading and writing e-mail), alternating between activities that have significantly different power requirements changes the rate at which your laptop uses battery power. This can vary the estimate of how much battery charge remains. Battery hardware and sensor circuitry. Newer, "smart" batteries are equipped with circuitry that calculates the measurements of charge remaining and reports the information to the battery meter. Older batteries use less sophisticated circuitry and might be less accurate.

    Read the article

  • Windows 32-bit and 64-bit and GPT

    - by MrLane
    I know similar questions have been asked before across several sites, but the answers at least to me have been confusing and conflicting. My understanding has always been that 64-bit Windows will create and use GPT disks just fine, but will not boot from them without a UEFI BIOS. Also my understanding WAS that 32-bit Windows could not use GPT at all and so is always restricted to 2.2TB disks, which was another reason to move to 64-bit on top of the 4GB memory limit. But I have now read that this isn't correct: 32-bit Windows will create and use GPT disks just as 64-bit does. The only resriction is that you can't boot 32-bit Windows even if you DO have a UEFI BIOS? I don't think much of the literature has explained this well. There are several tools floating around for creating virtual disks or 2.2+.8GB partition schemes and such for 32-bit systems. Why when it seems you can use GPT in 32-bit Windows anyway. It also seems that people blame MS for lagging behind with respect to all of this: but it seems the issue is with BIOS manufactures not supporting UEFI rather than MS not supporting GPT... Is my new understanding now correct?

    Read the article

  • Windows 3 Animated Background/Desktop/Wallpaper

    - by Synetech
    In the summer of 1995, I visited some family in Los Angeles. My uncle had a computer with Windows 3 (or some version thereof since Windows 95 had not been released yet). In Windows 3, there was no desktop or wallpaper like in later versions; instead you could set it to a simple pattern (still possible in later versions before XP) like hounds-tooth or bricks (interestingly, there seems to be next to nothing available on the Internet about this anymore; no screenshots and almost no pages). I recall being amused when I found a program (on the still young “world-wide web”) that would actually let you set an animated background. It was smooth and fluid and was quite an amazing thing at the time. If I recall correctly, it had several built-in animations including one of a light-orange-pink background over which storks flew towards the top-left, possibly with some light stuff floating in the “background” (they were actually animated and flapped their wings, not simply translated coordinates). The storks were somewhat simplified, black-line drawings. Over the years, I’ve tried finding it again a few times but never could. Worse, it’s become harder and harder over time as new programs came out and polluted the search results. I’m hoping that someone remembers this software and knows some useful information like the author or where to download it. (No, it’s not ScreenPaper. That was created in 1997 to let you set a screensaver as the Windows 95/NT4 background. This was at least two years earlier for Windows 3 and I’m almost certain it had these animations built-in—I don’t recall any stork screensavers for Windows 3.)

    Read the article

  • 32 core (each physical core) 2.2 GhZ or 12 core (6 physical cores) 3.0GHZ?

    - by Tejaswi Rana
    I am working on a multithreaded application (Forex trading app built on C#) and had the client upgrade from the 12 core 3.0GHZ machine (Intel) to a 32 core 2.2 Ghz machine (AMD). The PassMark benchmark results were significantly higher when using multicores doing Integer, Floating and other calculations while for a single core calculation it was a bit slower than the pack (others that were being compared to with similar config as the 12 core one). Oh it also comes with 64 GB RAM (4 times as the other one) and a much faster SSD. So after configuring and running the application on that machine, not only did it not perform as well, it was significantly slower. We're talking about 30seconds - 1 minute slower on an app that usually completes processing within 5-20 secs. The application uses MAX DEGREE of PARALLELISM (TPL) which I've tried setting to number of cores and also half of that. I've also tried running single threaded and without setting any limits in parallel threading. While it may be the hardware has some issues, I am wondering if the CPU processing speed is the issue. I can overclock to 3.0 GHZ. But is that even a good idea? Server Info - AMD http://www.passmark.com/forum/showthread.php?4013-AMD-Dual-6272-performance-is-60-lower-than-benchmarks Seems that benchmark was wrong to start with - officially. Intel i7 3930k OS (same in both) Windows 7 Professional 64-bit

    Read the article

  • Interpreting and using the Asterisk "timing test" command

    - by zigg
    Timing is very important for certain kinds of applications in Asterisk. If DAHDI is the timing source, the dahdi_test command can be used to check the timing provided by the DAHDI kernel module. If dahdi_test returns exclusively measurements above 99.975%, the DAHDI timing source is generally considered good. Since Asterisk 1.6, new timing sources have become available, such as pthread and timerfd. The accuracy of these timing sources seems to be measurable with the Asterisk CLI timing test command: localhost*CLI> timing test Attempting to test a timer with 50 ticks per second. Using the 'timerfd' timing module for this test. It has been 1000 milliseconds, and we got 50 timer ticks My concern is that timing 50 ticks seems to be a considerably less stressful test than dahdi_test's 8192 samples in 8000 ms, particularly since just about every system I've tried it on, virtual or otherwise, can handle it. I can ask timing test to ramp it up to what I think are dahdi_test's standards: localhost*CLI> timing test 1024 Attempting to test a timer with 1024 ticks per second. Using the 'timerfd' timing module for this test. It has been 1000 milliseconds, and we got 1024 timer ticks This will indeed break down a bit depending on the system I'm using, usually with a decrease in timer ticks. But I'm not sure whether this is useful to stress it to this level. Is there authoritative guidance on using and interpreting the timing test command to insure that a given Asterisk system has a timing source that will work well?

    Read the article

  • Architecture for highly available MySQL with automatic failover in physically diverse locations

    - by Warner
    I have been researching high availability (HA) solutions for MySQL between data centers. For servers located in the same physical environment, I have preferred dual master with heartbeat (floating VIP) using an active passive approach. The heartbeat is over both a serial connection as well as an ethernet connection. Ultimately, my goal is to maintain this same level of availability but between data centers. I want to dynamically failover between both data centers without manual intervention and still maintain data integrity. There would be BGP on top. Web clusters in both locations, which would have the potential to route to the databases between both sides. If the Internet connection went down on site 1, clients would route through site 2, to the Web cluster, and then to the database in site 1 if the link between both sites is still up. With this scenario, due to the lack of physical link (serial) there is a more likely chance of split brain. If the WAN went down between both sites, the VIP would end up on both sites, where a variety of unpleasant scenarios could introduce desync. Another potential issue I see is difficulty scaling this infrastructure to a third data center in the future. The network layer is not a focus. The architecture is flexible at this stage. Again, my focus is a solution for maintaining data integrity as well as automatic failover with the MySQL databases. I would likely design the rest around this. Can you recommend a proven solution for MySQL HA between two physically diverse sites? Thank you for taking the time to read this. I look forward to reading your recommendations.

    Read the article

  • Volume licenced copy of MS Office 2007 shows "Non Commercial Use" in title bar

    - by Linker3000
    I have just removed the demo copy of Office 2007 preinstalled on a new laptop and replaced it with an install of the full professional edition downloaded from the MS Volume Licensing site and installed one of our volume licence keys, yet the apps (Word etc.) show "Non Commercial Use" in the title bar, which is what usually happens in the Home and Student edition. I have tried: Deleting the Office registration keys in the registry and using one of our other Office 2007 volume licence keys (we have 7) when prompted to re-register Uninstalling Office completely and reinstalling it from a newly-downloaded ISO burned to CD and also from a compressed file that installs from hard disk/USB stick (both from Microsoft - no dodgy stuff) Yet the non-commercial message persists. Although it's a cosmetic issue, the laptop is going to be used for customer presentations and so the sales person is rightly concerned about the image this portrays. I presume there may be something floating around the registry or in a file somewhere but I can't find it. Articles I have found elsewhere just refer to the message being related to the use of a Home and Student licence key, which is 100% not the case. Any thoughts? Thanks.

    Read the article

  • Search for partial IP address using Windows Search?

    - by Dr. Dre
    I have a folder, c:\projects\, added to Windows Index. I know the indexing is working because I search for stuff in this folder all the time and the results come up very fast, and I've never noticed any accuracy problem until now. (I have had to tweak Indexing options to expand which file types have their contents indexed rather than just the file name, etc, but after that Search has worked pretty well for me). I've encountered a problem while trying to search for references to a particular IP address subnet. I'm trying to find all references to IP's with the pattern "192.168.220.xxx" (AKA, the 192.168.220.0/24, AKA 192.168.220.0/255.255.255.0 IP/netmask). Within Windows Explorer: c:\projects**.* is indexed c:\projects\work\project1\network_list.txt contains several "192.168.220.xxx" IP's Indexing status says all items are indexed (193,000 items). When I try to search for partial IP match, there are no search results. Tried searching for: 192.168.220, 192.168, 192.168.220., 192.168.220., 192.168.220.?, 192.168.220.??, 192.168.220.???, 192.168., 192.168.. Also tried variants of all the above surrounded with double quotes. All the searches returned 0 results. Within MS Outlook 2007: My mailbox, and all my offline .pst's are indexed. I search in Outlook pretty frequently, so I'm pretty sure indexed searches work across inbox and all .pst's. Indexing status in Outlook says all items are indexed. I also have references to these IP's in email, and I'd like to find all of them. Basically same deal as above, can't search for "192.168.220.xxx" IP's. Any way to fix this?

    Read the article

  • calculate AUC (GAM) in R [migrated]

    - by ahmad
    I used the following script to calculate AUC in R: library(mgcv) library(ROCR) library(AUC) data1=read.table("d:\\2005.txt", header=T) GAM<-gam(tuna ~ s(chla)+s(sst)+s(ssha),family=binomial, data=data1) gampred<- predict(GAM, type="response") rp <- prediction(gampred, data1$tuna) auc <- performance( rp, "auc")@y.values[[1]] auc roc <- performance( rp, "tpr", "fpr") plot( roc ) But when I was running the script, the result is: **rp <- prediction(gampred, data1$tuna) Error in prediction(gampred, data1$tuna) : Format of predictions is invalid. > > auc <- performance( rp, "auc")@y.values[[1]] Error in performance(rp, "auc") : object 'rp' not found > auc function (x, min = 0, max = 1) { if (any(class(x) == "roc")) { if (min != 0 || max != 1) { x$fpr <- x$fpr[x$cutoffs >= min & x$cutoffs <= max] x$tpr <- x$tpr[x$cutoffs >= min & x$cutoffs <= max] } ans <- 0 for (i in 2:length(x$fpr)) { ans <- ans + 0.5 * abs(x$fpr[i] - x$fpr[i - 1]) * (x$tpr[i] + x$tpr[i - 1]) } } else if (any(class(x) %in% c("accuracy", "sensitivity", "specificity"))) { if (min != 0 || max != 1) { x$cutoffs <- x$cutoffs[x$cutoffs >= min & x$cutoffs <= max] x$measure <- x$measure[x$cutoffs >= min & x$cutoffs <= max] } ans <- 0 for (i in 2:(length(x$cutoffs))) { ans <- ans + 0.5 * abs(x$cutoffs[i - 1] - x$cutoffs[i]) * (x$measure[i] + x$measure[i - 1]) } } return(as.numeric(ans)) } <bytecode: 0x03012f10> <environment: namespace:AUC> > > roc <- performance( rp, "tpr", "fpr") Error in performance(rp, "tpr", "fpr") : object 'rp' not found > plot( roc ) Error in levels(labels) : argument "labels" is missing, with no default** Can anybody help me to solve this problem? Thank you in advance.

    Read the article

  • Sound out of sync after merging multiple mp4 files with Avidemux

    - by Goto10
    I am trying to join (merge) two or more .mp4 files together, without re-encoding. Here is what I did: Started Avidemux 2.5.5. With File-Open, selected Input1.mp4. I received this message - "H.264 detected. If the file is using B-frames as reference it can lead to a crash or stuttering. Avidemux can use another mode which is safe but YOU WILL LOOSE SOME FRAME ACCURACY. Do you want to use that mode?". I chose "No". With File-Append, selected Input2.mp4. I received the same "H.264 detected" message again and chose "No". Selected the Format to MP4 (from AVI). Saved the output file (called Output.mp4) with File-Save-Save Video. Unfortunately, when I play the Output.mp4 video in VLC, the sound is out of sync with the second video. How can I correct this?

    Read the article

  • Can I tell if crashplan has backed up a particular file in a particular state?

    - by Chris Cogdon
    I would like to be able to tell, programmatically, if CrashPlan has backed-up a particular file, including the current updates to that file. I.e., that the current contents of a file are backed up. It's relatively easy to tell when CrashPlan last backed up a file: its file name appears in /usr/local/crashplan/log/backup_files.log.0, and with some accuracy, I could compare the backup time with the last modification time to the file, but that method appears to be somewhat dubious. A couple of methods I could think of, but I don't know how: Compare the current file to CrashPlan's metadata about that file. This needs knowledge about the format of CrashPlan's "cache" files as well as the hashing system used. This might be achievable through the CLI, but the CLI is just a portal into the GUI, and I need something that's scriptable. Restore the file to a temporary directory, and compare it. Unfortunately, there is no CLI to do restores; the GUI is the only way. I'll describe what I'm trying to achieve. It would be nice to know how to do the above, even if there are alternative methods for the following: I'm using CrashPlan for continuous backups to my PostgreSQL database, using WAL archives. In the current configuration, the archive command copies the files to an archive directory, which is backed up by CrashPlan. Every so often I manually confirm (or just trust) a group of WALs are backed up, and remove them from the archive directory, and occasionally do a restore through the GUI to ensure I can retrieve current and "deleted" WALs. The xlog directory is backed-up, too, so I have a good chance of doing a near-full restore even if a particular xlog hasn't been archived by PostgreSQL yet. I'd like to be able to automate this process, which necessitates either confirming the backup status and recency, or automating a restore for comparison purposes. (As a bonus, if the method is trustworthy, I could turn the "archive_command" from "copy to archive directory" into "confirm CrashPlan has backed up the current version", and do away with the archive directory completely). (And, yes, I'm doing regular pg_dumpall's, in addition to the above.)

    Read the article

  • finding the best network latency between two countries

    - by Yoav Aner
    I know there are many tools to test for bandwidth and latency, but they all rely on having at least one host from which you can run those tests. I wonder whether there's an online source or some other way to guestimate the latency or speed between two countries (in general). For example, would a customer in Japan get lower latency if the server is located in Singapore or Australia? Is a user in India likely to get higher download speed from a server in the UK or in the US? Are there any online resources or some clever ways to answer those questions with a reasonable degree of accuracy? [UPDATE]: Thanks for the great suggestions from Raffael Luthiger. I didn't know about those looking glass servers. The submarine cable maps were also really cool to discover (Thanks to Jesper Mortensen). Also seems really wise if I could ask those network professional in the area for their experience, but obviously I don't have access to those. At least some of them are on SF :) However, I'm still a little unsure how to combine those resources to give me some measurements. This is the information I have: Two countries (A,B). I do have IP addresses of customers in country A (I can obtain those from the web server log files for example). Presumably I can find some looking glass servers in country B and run a trace to those IPs. What's the best measurements to use? Are there any scripts that help automate at least some of this process?

    Read the article

  • Keepalived for more than 20 virtual addresses

    - by cvaldemar
    I have set up keepalived on two Debian machines for high availability, but I've run into the maximum number of virtual IP's I can assign to my vrrp_instance. How would I go about configuring and failing over 20+ virtual IP's? This is the, very simple, setup: LB01: 10.200.85.1 LB02: 10.200.85.2 Virtual IPs: 10.200.85.100 - 10.200.85.200 Each machine is also running Apache (later Nginx) binding on the virtual IPs for SSL client certificate termination and proxying to backend webservers. The reason I need so many VIP's is the inability to use VirtualHost on HTTPS. This is my keepalived.conf: vrrp_script chk_apache2 { script "killall -0 apache2" interval 2 weight 2 } vrrp_instance VI_1 { interface eth0 state MASTER virtual_router_id 51 priority 101 virtual_ipaddress { 10.200.85.100 . . all the way to . 10.200.85.200 } An identical configuration is on the BACKUP machine, and it's working fine, but only up to the 20th IP. I have found a HOWTO discussing this problem. Basically, they suggest having just one VIP and routing all traffic "via" this one IP, and "all will be well". Is this a good approach? I'm running pfSense firewalls in front of the machines. Quote from the above link: ip route add $VNET/N via $VIP or route add $VNET netmask w.x.y.z gw $VIP Thanks in advance. EDIT: @David Schwartz said it would make sense to add a route, so I tried adding a static route to the pfSense firewall, but that didn't work as I expected it would. pfSense route: Interface: LAN Destination network: 10.200.85.200/32 (virtual IP) Gateway: 10.200.85.100 (floating virtual IP) Description: Route to VIP .100 I also made sure I had packet forwarding enabled on my hosts: $ cat /etc/sysctl.conf net.ipv4.ip_forward=1 net.ipv4.ip_nonlocal_bind=1 Am I doing this wrong? I also removed all VIPs from the keepalived.conf so it only fails over 10.200.85.100.

    Read the article

  • Dell OMCI: Wacky values for Temperature and etc? (Win7x64)

    - by Yablargo
    Hey All. I am running a Dell Precision R5400 Workstation with dell OMCI installed. I am using it to test polling various data over WMI for our monitoring across the enterprise. I'm getting some weird results. perhaps someone can help point me in the direction of some clarification? Posted is the results of my DCIM\SYSMAN\DCIM_NumericSensor probe for sensor type 2(temp sensor) Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved. ----------------------------------- DCIM_NumericSensor instance ----------------------------------- Accuracy: AccuracyUnits: AdditionalAvailability: Availability: AvailableRequestedStates: BaseUnits: 2 Caption: CommunicationStatus: CreationClassName: DCIM_NumericSensor CurrentReading: -214748365 CurrentState: Unknown Description: DetailedStatus: DeviceID: Root/MainSystemChassis/TemperatureObj ElementName: Temperature Sensor:CPU0 EnabledDefault: 2 EnabledState: 2 EnabledThresholds: ErrorCleared: ErrorDescription: HealthState: 5 Hysteresis: IdentifyingDescriptions: InstallDate: IsLinear: LastErrorCode: LocationIndicator: LowerThresholdCritical: LowerThresholdFatal: LowerThresholdNonCritical: MaxQuiesceTime: MaxReadable: MinReadable: Name: NominalReading: NormalMax: NormalMin: OperatingStatus: OperationalStatus: 2 OtherEnabledState: OtherIdentifyingInfo: OtherSensorTypeDescription: PollingInterval: PossibleStates: Unknown,Normal,Fatal,Lower Non-Critical,Upper Non-Critical,Lower Critical,Upper Critical PowerManagementCapabilities: PowerManagementSupported: PowerOnHours: PrimaryStatus: ProgrammaticAccuracy: RateUnits: 0 RequestedState: 12 Resolution: SensorType: 2 SettableThresholds: Status: StatusDescriptions: StatusInfo: SupportedThresholds: SystemCreationClassName: DCIM_ComputerSystem SystemName: dt:5Q7BKK1 TimeOfLastStateChange: Tolerance: TotalPowerOnHours: TransitioningToState: 12 UnitModifier: 0 UpperThresholdCritical: UpperThresholdFatal: UpperThresholdNonCritical: ValueFormulation: 2 I'm not really sure whats going on, but note the CurrentReading: -214748365. I have reinstalled OMCI a few times, installed the OMCI 7x compatability and same thing I consistently get that error. It almost looks like its a issue between 32/64 bit value or something? Do I have to convert it to a float ? :)

    Read the article

  • Importing long numerical identifiers into Excel

    - by Niels Basjes
    I have some data in a database that uses ids that have the form of 16 digit numbers. In some situations i need to export the data in such a way that it can be manipulated in excel. So i export the data into a file and import it into excel. I've tried several file formats and I'm stuck. The problem I'm facing is that when reading a file into excel that has a cell that looks like a number then excel treats it as a number. The catch is that (as far as i can tell) all numerical values in excel are double precision floating point which have a precision of less than 16 digits. So my ids are changed: very often the last digit its changed to a 0. So far I've only been able to convince excel to keep the Id unchanged by breaking it myself: by adding a letter or symbol to the Id. This however means that in order to use the value again it must be "unbroken". Is there a way to create a file where i can specify that excel must treat the value as a text without changing the value? Or its there a way to let excel treat the value as a long (64bit integer)?

    Read the article

  • Windows-to-linux: Putty with SSH and private/public key pair

    - by Johnny Kauffman
    I spent about 3 hours trying to figure out how to connect to a linux box from my windows machine using putty without having to send the password. This is connecting to an Ubuntu server that is using OpenSSH. The private key is SSH-2 RSA, 1024 bits. I am connecting using SSH2. I have run into the more common problems already: Putty generated the public key in the "wrong format". I have corrected this (as seen on this blog post). However, since I am not yet connected, I cannot absolutely confirm that this file is in the correct format. The key is all on a single line now, and I have tried adding/removing line breaks at the end of the file. I've also tried the public file doctoring process a few times to ensure that I haven't flubbed up the manual conversion. Even so, I have no way to verify accuracy here. The permissions were at once point wrong as well, specifically meaning that the file had too many permissions. I had to solve this too and I know it got past this because I no longer see a related error in /var/log/auth.log. I've tried both authorized_keys and authorized_keys2 in case the server has an old version of OpenSSH, but this changed nothing. I do have access as a user. After this keyfile stuff fails, I can enter my password instead The only remaining nibble of information I have is that it claims I have the alleged password wrong: sshd[22288]: Failed password for zzzzzzz from zz.zz.zz.zz port 53620 ssh2 Even so, as far as I can tell, this is just a lazy try/catch somewhere, since I don't think there's a password involved at all. I see nothing else in any of the /var/log files of use. What else could be wrong?

    Read the article

  • Looking for suggestions for hosting Windows 2000 Server in the cloud / VPS / etc?

    - by JohnyD
    I have a Windows 2000 Server, currently virtualized in Hyper-V, that I would like to get running off-site as a backup (cloud, VPS, etc). You can't virtualize in EC2 and I'm fairly certain there are no Server 2000 AMI's floating about (correct me if I'm wrong!). If anyone has a recommendation on how I can get a virtualized Windows 2000 Server running in a secure, remote environment I would be grateful. As far as locations go I'd be interested in both North America as well as Australia and Europe. In a nutshell, we're ploughing our way out of a legacy codebase and this server is the last that remains of the legacy apps. However, it is still very much used by our clients. Everything is backed up each night (data, images, etc) to tape which is then taken offsite. However, in the event of a fire I would love to have a backup legacy server to point DNS records to. So while I am rebuilding from the ashes our services would already be available. It would save a lot of time and make my managers all the more happy (and that's what it's all about, riighhtt? :D) Thank you all for your suggestions. Please let me know if I've left out any important information. Additional info: - the legacy codebase does not function properly in Server 2003

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >