Search Results

Search found 3124 results on 125 pages for 'groups'.

Page 41/125 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • Rethinking Oracle Optimizer Statistics for P6 Part 2

    - by Brian Diehl
    In the previous post (Part 1), I tried to draw some key insights about the relationship between P6 and Oracle Optimizer Statistics.  The first is that average cardinality has the greatest impact on query optimization and that the particular queries generated by P6 are more likely to use this average during calculations. The second is that these are statistics that are unlikely to change greatly over the life of the application. Ultimately, our goal is to get the best query optimization possible.  Or is it? Stability No application administrator wants to get the call at 9am that their application users cannot get there work done because everything is running slow. This is a possibility with a regularly scheduled nightly collection of statistics. It may not just be slow performance, but a complete loss of service because one or more queries are optimized poorly. Ideally, this should not be the case. The database optimizer should make better decisions with more up-to-date data. Better statistics may give incremental performance benefit. However, this benefit must be balanced against the potential cost of system down time.  It is stability that we ultimately desire and not absolute optimal performance. We do want the benefit from more accurate statistics and better query plans, but not at the risk of an unusable system. As a result, I've developed the following methodology around managing database statistics for the P6 database.  1. No Automatic Re-Gathering - The daily, weekly, or other interval of statistic gathering is unlikely to be beneficial. Quite the opposite. It is more likely to cause problems. 2. Smart Re-Gathering - The time to collect statistics is when things have changed significantly. For a new installation of P6, this is happening more often because the data is growing from a few rows to thousands and more. But for a mature system, the data is not changing significantly from week-to-week. There are times to collect statistics: New releases of the application Changes in the underlying hardware or software versions (ex. new Oracle RDBMS version) When additional user groups are added. The new groups may use the software in significantly different ways. After significant changes in the data. This may be monthly, quarterly or yearly.  3. Always Test - If you take away one thing from this post, it would be to always have a plan to test after changing statistics. In reality, statistics can be collected as often as you desire provided there are tests in place to verify that performance is the same or better. These might be automated tests or simply a manual script of application functions. 4. Have a Way Out - Never change the statistics without a way to return to the previous set. Think of the statistics as one part of the overall application code that also includes the source code--both application and RDBMS. It would be foolish to change to the new code without a way to get back to the previous version. In the final post, I will talk about the actual script I created for P6 PMDB and possible future direction for managing query performance. 

    Read the article

  • How to display a flyout menu on clicking an image in Grid header in MVC?

    - by Vincent
    A grid is displayed using the following code in MVC. <%= this.Grid( "routes-" + mc , "Testing", Model.Routes, new GridBuilder<RouteModel>() .Column( "chk", () => Html.Image( Url.Content( "down.gif" ), "Select or deselect tests" ), (m) => "<input type='hidden' name='routeLinkId' value='"+ m.RouteLinkID +"' />" + Html.CheckBox( "drugRoute" + mc + m.RouteLinkID, m.IsChecked ) ) .Column( "route clip-text", "Route", (m) = Html.Encode( m.Route ) ) .Column( "groups clip-text", "Groups", (m) = "" + Html.Encode(m.Group) + "" ) .ToGrid() ) % On clicking the image in header I need to display a flyout menu. The code for the flyout menu is below. <div id="group-menu-<%= mc %>" class="flyout-menu" title="Select tests"> <div> <p>Select</p> <ul> <li><button type="button" name="one">One</button></li> <li><button type="button" name="two">two</button></li> </ul> <p>Unselect</p> <ul> <li><button type="button" name="unselect-one">one</button></li> <li><button type="button" name="unselect-two">two</button></li> </ul> </div> </div> Now how do I display this menu on clicking the image in header.

    Read the article

  • JSON-RPC and Json-rpc service discovery specifications

    - by Artyom
    Hello, I'm going to implement JSON-PRC web service. I need specifications for this. So far I had found only one resource that can be called as real specifications: JSON-RPC 1.0 http://json-rpc.org/wiki/specification Proposal of JSON-PRC 2.0: http://groups.google.com/group/json-rpc/web/json-rpc-2-0 (why is it on google groups?) However I've seen that JavaScript frameworks like Dojo actively use JSON-RPC SMD Service Mapping Description proposal But it requires JSON Schema specifications, but it redirects to incorrect URL as reference. So far I had found following: http://tools.ietf.org/html/draft-zyp-json-schema-02 And it is still draft... Can anybody point me to some actual specifications... At least something official updated? Because it looks like that implementing JSON-RPC 1.0 as is may be not enough, at least for frameworks like Dojo. Or am I wrong? Questions: Would implementation of JSON-RPC 1.0 specifications be enough to provide JSON-RPC service for most of modern clients, and how many clients there (if at-all) that actually support beyond JSON-RPC 1.0 capabilities (SMD, Schema, 2.0)? Because it looks like that JSON-RPC 1.0 is only one that has official specifications (and not draft) If I should implement SMD, or it is recommended can somebody point to official, most recent specifications of Json Schema and Service Mapping Description or links I found are really "the specifications?" Are JSON-RPC 2.0, SMD and JSON-Schema drafts stable enough to implement them? Note: do not suggest existing JSON-RPC service implementations. Anybody?

    Read the article

  • Full JSON-RPC specifications

    - by Artyom
    Hello, I'm going to implement JSON-PRC web service. I need specifications for this. So far I had found only one resource that can be called as real specifications: JSON-RPC 1.0 http://json-rpc.org/wiki/specification Proposal of JSON-PRC 2.0: http://groups.google.com/group/json-rpc/web/json-rpc-2-0 (why is it on google groups?) However I've seen that JavaScript frameworks like Dojo actively use JSON-RPC SMD Service Mapping Description proposal But it requires JSON Schema specifications, but it redirects to incorrect URL as reference. So far I had found following: http://tools.ietf.org/html/draft-zyp-json-schema-02 And it is still draft... Can anybody point me to spome actual specifications... At least something official updated? Because it looks like that implementing JSON-RPC 1.0 and 2.0 would not be enought, at least for frameworks like Dojo. Or am I wrong? Questions: Is it enough to implement JSON-RPC 1.0 specifications and 2.0 draft to be on safe side, would this work for most JSON-RPC clients? If I should implement SMD, or it is recommended can somebody point to official specifications of Json Schema and Service Mapping Description or links I found are really "specifications?" Note: do not suggest existing JSON-RPC service implementations.

    Read the article

  • Getting an Error Trying to Create an Object in Python

    - by Nick Rogers
    I am trying to create an object from a class in python but I am getting an Error, "e_tank = EnemyTank() TypeError: 'Group' object is not callable" I am not sure what this means, I have tried Google but I couldn't get a clear answer on what is causing this error. Does anyone understand why I am unable to create an object from my EnemyTank Class? Here is my code: #Image Variables bg = 'bg.jpg' bunk = 'bunker.png' enemytank = 'enemy-tank.png' #Import Pygame Modules import pygame, sys from pygame.locals import * #Initializing the Screen pygame.init() screen = pygame.display.set_mode((640,360), 0, 32) background = pygame.image.load(bg).convert() bunker_x, bunker_y = (160,0) class EnemyTank(pygame.sprite.Sprite): e_tank = pygame.image.load(enemytank).convert_alpha() def __init__(self, startpos): pygame.sprite.Sprite.__init__(self, self.groups) self.pos = startpos self.image = EnemyTank.image self.rect = self.image.get_rect() def update(self): self.rect.center = self.pos class Bunker(pygame.sprite.Sprite): bunker = pygame.image.load(bunk).convert_alpha() def __init__(self, startpos): pygame.spriter.Sprite.__init__(self, self.groups) self.pos = startpos self.image = Bunker.image self.rect = self.image.get_rect() def getCollisionObjects(self, EnemyTank): if (EnemyTank not in self._allgroup, False): return False self._allgroup.remove(EnemyTank) result = pygame.sprite.spritecollide(EnemyTank, self._allgroup, False) self._allgroup.add(EnemyTank) def update(self): self.rect.center = self.pos #Setting Up The Animation x = 0 clock = pygame.time.Clock() speed = 250 allgroup = pygame.sprite.Group() EnemyTank = allgroup Bunker = allgroup e_tank = EnemyTank() bunker = Bunker()5 #Main Loop while True: for event in pygame.event.get(): if event.type == QUIT: pygame.quit() sys.exit() screen.blit(background, (0,0)) screen.blit(bunker, (bunker_x, bunker_y)) screen.blit(e_tank, (x, 0)) pygame.display.flip() #Animation milli = clock.tick() seconds = milli/1000. dm = seconds*speed x += dm if x>640: x=0 #Update the Screen pygame.display.update()

    Read the article

  • How do I send automated e-mails from Drupal using Messaging and Notifications?

    - by Adrian
    I am working on a Notifications plugin, and after starting to write my notes down about how to do this, decided to just post them here. Please feel free to come make modifications and changes. Eventually I hope to post this on the Drupal handbook as well. Thanks. --Adrian Sending automated e-mails from Drupal using Messaging and Notifications To implement a notifications plugin, you must implement the following functions: Use hook_messaging, hook_token_list and hook_token_values to create the messages that will be sent. Use hook_notifications to create the subscription types Add code to fire events (eg in hook_nodeapi) Add all UI elements to allow users to subscribe/unsubscribe Understanding Messaging The Messaging module is used to compose messages that can be delivered using various formats, such as simple mail, HTML mail, Twitter updates, etc. These formats are called "send methods." The backend details do not concern us here; what is important are the following concepts: TOKENS: tokens are provided by the "tokens" module. They allow you to write keywords in square brackets, [like-this], that can be replaced by any arbitrary value. Note: the token groups you create must match the keys you add to the $events-objects[$key] array. MESSAGE KEYS: A key is a part of a message, such as the greetings line. Keys can be different for each send method. For example, a plaintext mail's greeting might be "Hi, [user]," while an HTML greeing might be "Hi, [user]," and Twitter's might just be "[user-firstname]: ". Keys can have any arbitrary name. Keys are very simple and only have a machine-readable name and a user-readable description, the latter of which is only seen by admins. MESSAGE GROUPS: A group is a bunch of keys that often, but not always, might be used together to make up a complete message. For example, a generic group might include keys for a greeting, body, closing and footer. Groups can also be "subclassed" by selecting a "fallback" group that will supply any keys that are missing. Groups are also associated with modules; I'm not sure what these are used for. Understanding Notifications The Notifications module revolves around the following concepts: SUBSCRIPTIONS: Notifications plugins may define one or more types of subscriptions. For example, notifications_content defines subscriptions for: Threads (users are notified whenever a node or its comments change) Content types (users are notified whenever a node of a certain type is created or is changed) Users (users are notified whenever another user is changed) Subscriptions refer to both the user who's subscribed, how often they wish to be notified, the send method (for Messaging) and what's being subscribed to. This last part is defined in two steps. Firstly, a plugin defines several "subscription fields" (through a hook_notifications op of the same name), and secondly, "subscription types" (also an op) defines which fields apply to each type of subscription. For example, notifications_content defines the fields "nid," "author" and "type," and the subscriptions "thread" (nid), "nodetype" (type), "author" (author) and "typeauthor" (type and author), the latter referring to something like "any STORY by JOE." Fields are used to link events to subscriptions; an event must match all fields of a subscription (for all normal subscriptions) to be delivered to the recipient. The $subscriptions object is defined in subsequent sections. Notifications prefers that you don't create these objects yourself, preferring you to call the notifications_get_link() function to create a link that users may click on, but you can also use notifications_save_subscription and notifications_delete_subscription to do it yourself. EVENTS: An event is something that users may be notified about. Plugins create the $event object then call notifications_event($event). This either sends out notifications immediately, queues them to send out later, or both. Events include the type of thing that's changed (eg 'node', 'user'), the ID of the thing that's changed (eg $node-nid, $user-uid) and what's happened to it (eg 'create'). These are, respectively, $event-type, $event-oid (object ID) and $event-action. Warning: notifications_content_nodeapi also adds a $event-node field, referring to the node itself and not just $event-oid = $node-nid. This is not used anywhere in the core notifications module; however, when the $event is passed back to the 'query' op (see below), we assume the node is still present. Events do not refer to the user they will be referred to; instead, Notifications makes the connection between subscriptions and events, using the subscriptions' fields. MATCHING EVENTS TO SUBSCRIPTIONS: An event matches a subscription if it has the same type as the event (eg "node") and if the event matches all the correct fields. This second step is determined by the "query" hook op, which is called with the $event object as a parameter. The query op is responsible for giving Notifications a value for all the fields defined by the plugin. For example, notifications_content defines the 'nid', 'type' and 'author' fields, so its query op looks like this (ignore the case where $event_or_user = 'user' for now): $event_or_user = $arg0; $event_type = $arg1; $event_or_object = $arg2; if ($event_or_user == 'event' && $event_type == 'node' && ($node = $event_or_object->node) || $event_or_user == 'user' && $event_type == 'node' && ($node = $event_or_object)) { $query[]['fields'] = array( 'nid' => $node->nid, 'type' => $node->type, 'author' => $node->uid, ); return $query; After extracting the $node from the $event, we set $query[]['fields'] to a dictionary defining, for this event, all the fields defined by the module. As you can tell from the presence of the $query object, there's way more you can do with this op, but they are not covered here. DIGESTING AND DEDUPING: Understanding the relationship between Messaging and Notifications Usually, the name of a message group doesn't matter, but when being used with Notifications, the names must follow very strict patterns. Firstly, they must start with the name "notifications," and then are followed by either "event" or "digest," depending on whether the message group is being used to represent either a single event or a group of events. For 'events,' the third part of the name is the "type," which we get from Notification's $event-type (eg: notifications_content uses 'node'). The last part of the name is the operation being performed, which comes from Notification's $event-action. For example: notifications-event-node-comment might refer to the message group used when someone comments on a node notifications-event-user-update to a user who's updated their profile Hyphens cannot appear anywhere other than to separate the parts of these words. For 'digest' messages, the third and fourth part of the name come from hook_notification's "event types" callback, specifically this line: $types[] = array( 'type' => 'node', 'action' => 'insert', ... 'digest' => array('node', 'type'), ); $types[] = array( 'type' => 'node', 'action' => 'update', ... 'digest' => array('node', 'nid'), ); In this case, the first event type (node insertion) will be digested with the notifications-digest-node-type message template providing the header and footer, likely saying something like "the following [type] was created." The second event type (node update) will be digested with the notifications-digest-node-nid message template. Data Structure and Callback Reference $event The $event object has the following members: $event-type: The type of event. Must match the type in hook_notification::"event types". {notifications_event} $event-action: The action the event describes. Most events are sorted by [$event-type][$event-action]. {notifications_event}. $event-object[$object_type]: All objects relevant to the event. For example, $event-object['node'] might be the node that the event describes. $object_type can come from the 'event types' hook (see below). The main purpose appears to be to be passed to token_replace_multiple as the second parameter. $event-object[$event-type] is assumed to exist in the short digest processing functions, but this doesn't appear to be used anywhere. Not saved in the database; loaded by hook_notifications::"event load" $event-oid: apparently unused. The id of the primary object relevant to this event (eg the node's nid). $event-module: apparently unused $event-params[$key]: Mainly a place for plugins to save random data. The main module will serialize the contents of this array but does not use it in any way. However, notifications_ui appears to do something weird with it, possibly by using subscriptions' fields as keys into this array. I'm not sure why though. hook_notifications op 'subscription types': returns an array of subscription types provided by the plugin, in the form $key = array(...) with the following members: event_type: this subscription can only match events whose $event-type has this value. Stored in the database as notifications.event_type for every individual subscription. Apparently, this can be overiden in code but I wouldn't try it (see notifications_save_subscription). fields: an unkeyed array of fields that must be matched by an event (in addition to the event_type) for it to match this subscription. Each element of this array must be a key of the array returned by op 'subscription fields' which in turn must be used by op 'query' to actually perform the matching. title: user-readable title for their subscriptions page (eg the 'type' column in user/%uid/notifications/subscriptions) description: a user-readable description. page callback: used to add a supplementary page at user/%uid/notifications/blah. This and the following are used by notifications_ui as a part of hook_menu_alter. Appears to be partially deprecated. user page: user/%uid/notifications/blah. op 'event types': returns an array of event types, with each event type being an array with the following members: type: this will match $event-type action: this will match $event-action digest: an array with two ordered (non-keyed) elements, "type" and "field." 'type' is used as an index into $event-objects. 'field' is also used to group events like so: $event-objects[$type]-$field. For example, 'field' might be 'nid' - if the object is a node, the digest lines will be grouped by node ID. Finally, both are used to find the correct Messaging template; see discussion above. description: used on the admin "Notifications-Events" page name: unused, use Messaging instead line: deprecated, use Messaging instead Other Stuff This is an example of the main query that inserts an event into the queue: INSERT INTO {notifications_queue} (uid, destination, sid, module, eid, send_interval, send_method, cron, created, conditions) SELECT DISTINCT s.uid, s.destination, s.sid, s.module, %d, // event ID s.send_interval, s.send_method, s.cron, %d, // time of the event s.conditions FROM {notifications} s INNER JOIN {notifications_fields} f ON s.sid = f.sid WHERE (s.status = 1) AND (s.event_type = '%s') // subscription type AND (s.send_interval >= 0) AND (s.uid <> %d) AND ( (f.field = '%s' AND f.intval IN (%d)) // everything from 'query' op OR (f.field = '%s' AND f.intval = %d) OR (f.field = '%s' AND f.value = '%s') OR (f.field = '%s' AND f.intval = %d)) GROUP BY s.uid, s.destination, s.sid, s.module, s.send_interval, s.send_method, s.cron, s.conditions HAVING s.conditions = count(f.sid)

    Read the article

  • Stop event bubbling in Javascript

    - by Kartik Rao
    I have a html structure like : <div onmouseover="enable_dropdown(1);" onmouseout="disable_dropdown(1);"> My Groups <a href="#">(view all)</a> <ul> <li><strong>Group Name 1</strong></li> <li><strong>Longer Group Name 2</strong></li> <li><strong>Longer Group Name 3</strong></li> </ul> <hr /> Featured Groups <a href="#">(view all)</a> <ul> <li><strong>Group Name 1</strong></li> <li><strong>Longer Group Name 2</strong></li> <li><strong>Longer Group Name 3</strong></li> </ul> </div> I want the onmouseout event to be triggered only from the main div, not the 'a' or 'ul' or 'li' tags within the div! My onmouseout function is as follows : function disable_dropdown(d) { document.getElementById(d).style.visibility = "hidden"; } Can someone please tell me how I can stop the event from bubbling up? I tried the solutions (stopPropogation etc) provided on other sites, but I'm not sure how to implement them in this context. Any help will be appreciated. Thanks a lot!

    Read the article

  • Theoretically basic RDLC question

    - by user86431
    I'm trying to do something that I thought ought to be reasonably simple but I keep failing... Maybe I just need more coffee, but I thoguht i see if anyone else has solved the problem already. I've got a report, it contains a pile off rows. I want the row to show up grouped by one column called office. I want the groups of offices sorted by their column region. I want the rows within the office group sorted by column name. so it'd show up like this Region1 Agency a a b c Agency b a b Region 2 Agency a1 a b c etc... I can get the grouping, I can get the groups sorted by region. but I can't get the contents of the group to be sorted by name. my curret guess was Group by Office then in the sort tab, sort by region, then office, then name. no joy. Any help is appreciated. if it's relavant I'm using c# and vs2008. Thanks, E-

    Read the article

  • How to let m2eclipse use nexus repositories instead of maven one

    - by lisak
    I have this situation: An artifact in maven local repo that I don't want to use anymore. Instead, I want it to be downloaded by maven from proxied nexus remote repository. It's a typical situation cause a lot of artifacts are called just name-SNAPSHOT and the artifact is changing but the name is still the same. Eclipse with m2eclipse is running. I delete the entire directory of the artifact in local maven repo m2eclipse "Reindex local maven repository" - which creates a new nexus index for local maven repo I guess Project - maven Update Dependencies - now m2eclipse should run maven, which doesn't see the artifact in local maven repo, so it uses nexus repositories to download it (expected behavior) Instead, the directory structure in maven local repo is recreated and there is this file: "m2e-lastUpdated.properties" with following inside: local|http\://nexus\:8082/nexus-webapp-1.6.0/content/groups/public|javadoc=1274399332215 local|http\://nexus\:8082/nexus-webapp-1.6.0/content/groups/public|sources=1274399332161 and m2eclipse says Missing artifact net.sourceforge.htmlunit:htmlunit:jar:2.8-SNAPSHOT:compile even though the artifact physically exists here: nexus:8082/nexus-webapp-1.6.0/content/repositories/htmlunit-snapshot/net/sourceforge/htmlunit/htmlunit/2.8-SNAPSHOT/htmlunit-2.8-SNAPSHOT.jar Maven just doesn't use this location at all. Trust me I tried everything, this m2eclipse behavior is terrible.

    Read the article

  • jquery creating stacked bar chart with flot?

    - by KittyYoung
    I'm using jquery flot and I'm trying to create a stacked bar chart, but I'm having some syntax issues... I'll post my code at the end of this, but I'm quite certain it's wrong. I do get a stacked bar chart, but there's only three columns... Basically, here is the data that I'm working with and what I want to accomplish... The first group (Focus Group 1) on each line is the bottom bar of the stacked bar, the second group (Focus Group 2) is the second, and the third group (Focus Group 3) is the top group. The "Responses" are what I want to use on the x-axis, the first number in each set is x, and the second number is y. Response1, [0, 0], [0,0], [0,9] Response2, [1, 5], [1,5], [1,11] Response3, [2, 2], [2,0], [2,8] Response4, [3, 1], [3,2], [3,6] Response5, [4, 0], [4,0], [4,7] I should also mention, that I'm not sure if a stacked chart is the best way to go... Admittedly, I'm not a very visual person, and generally find charts annoying... If there's a better way to present this data, then I am so totally open to suggestions... Essentially... I have a series of questions. Each of these questions were presented to three focus groups. Members of the focus groups selected a response. I'm trying to present the count per response, per focus group, for each question. I thought that a stacked chart would be the best way to go, but again, I'm open to other ways of doing this. The only thing is, I definitely need a visual representation of the data....

    Read the article

  • Implementing commands in MMVM

    - by user312372
    I am trying to change the source property of the frame in Page1.xaml when the SampleCommand is excecuted. How do I acheive this in the View Model? Page1.xaml: <Page ...> <DockPanel> <r:ribbon> <r:RibbonTab Label="Keys"> <r:RibbonTab.Groups> <r:RibbonGroup GroupSizeDefinitions="{StaticResource RibbonLayout}"> <r:RibbonGroup.Command> <r:RibbonCommand LabelTitle="RibbonButton"/> </r:RibbonGroup.Command> <r:RibbonButton x:Name="RibbonButton1" Command="{Binding Path=SampleCommand}"/> </r:RibbonGroup> </r:RibbonTab.Groups> </r:RibbonTab> </r:Ribbon> <Border Name="PageBorder" Grid.Row="0" Grid.Column="1"> <Frame Name="pageFrame" Source="FirstPage.xaml" /> </Border> </DockPanel> </Page> Page1ViewModel.cs: RelayCommand _sampleCommand; public ICommand SampleCommand { get { // create command ?? return _sampleCommand } } page1.xaml.cs: Page1ViewModel pageViewModel; //When page loads this.DataContext = pageViewModel;

    Read the article

  • SQL Server 2005 standard filegroups / files for performance on SAN

    - by Blootac
    Ok so I've just been on a SQL Server course and we discussed the usage scenarios of multiple filegroups and files when in use over local RAID and local disks but we didn't touch SAN scenarios so my question is as follows; I currently have a 250 gig database running on SQL Server 2005 where some tables have a huge number of writes and others are fairly static. The database and all objects reside in a single file group with a single data file. The log file is also on the same volume. My interpretation is that separate data files should be used across different disks to lessen disk contention and that file groups should be used for partitioning of data. However, with a SAN you obviously don't really have the same issue of disk contention that you do with a small RAID setup (or at least we don't at the moment), and standard edition doesn't support partitioning. So in order to improve parallelism what should I do? My understanding of various Microsoft publications is that if I increase the number of data files, separate threads can act across each file separately. Which leads me to the question how many files should I have. One per core? Should I be putting tables and indexes with high levels of activity in separate file groups, each with the same number of data files as we have cores? Thank you

    Read the article

  • need help passing multiple variables from foreach loop to test in switch case statement

    - by Brad
    $list_of_groups = array("FACULTY","STAFF"); foreach ($list_of_groups as $i => $group) { $user_in_group = $adldap->user_ingroup($username,$group); print "<h2>Group: ".$group." user in group? ".$user_in_group."</h2>"; // if 1, means yes } Need to print run the appropriate function based on what returns true. There are user's that are members of both FACULTY and STAFF groups, so I want to check for those users and display the appropriate content for them. So if the user is both faculty and staff, then display this, if they are only of staff, display that, same for faculty, might not make sense, but I will write out some code "in theory" that will help you understand what I am trying to do switch(Get group membership of user) { case "FACULTY": print "Faculty group member"; break; case "STAFF": print "Staff group member"; break; case "FACULTY and STAFF": print "Member of both faculty and staff"; break; } I am unsure on how it will check if they are members of both groups and run that thru the case statement to display the appropriate message. The foreach look currently runs thru every group the user belongs to, prints out the ones from the $list_of_groups and the number 1 to the right of it, signifying they belong to it. The problem I have is trying to use that information to run thru the case statement, I am unsure of how to go about that. This is what it prints out for the user currently passed thru the foreach loop: Group: FACULTY user in group? 1 Group: STAFF user in group? 1 Any help is appreciated.

    Read the article

  • Active Directory - Query Group for all machines

    - by Ben Cawley
    Hi, I'm trying to obtain a list of all Machines that are members of a known group. I have the group GUID and am constructing a query using the "memberof=" format and filtering by ObjectClass. This works fine but doesn't return machines if the PrimaryGroup attribute of a machine is set to be the known group. In this case, that machine won't be returned. I've found the explanation of why this is in the following link (See Joe Kaplan's response) http://www.eggheadcafe.com/software/aspnet/29773581/active-directory-query-c.aspx Unfortunately the outlined answer is how to obtain the list of groups from a given user. I'd like to do the reverse and from a given group obtain the list of machines. It seems that the PrimaryGroup information is stored on the Machine/User side so I'm not sure if what I want to do is even possible. I had thought I would be able to query the TokenGroup attribute of the known group and then construct a query to return all machines that have the TokenGroup attribute set but it seems that not all groups have this attribute. Does anyone have any ideas or suggestions? If any clarification is needed let me know! Cheers, Ben

    Read the article

  • cakephp secure link using html helper link method..

    - by Aaron
    What's the best way in cakephp to extend the html-link function so that I can tell it to output a secure(https) link? Right now, I've added my own secure_link function to app_helpers that's basically a copy of the link function but adding a https to the beginning. But it seems like there should be a better way of overriding the html-link method so that I can specify a secure option. http://groups.google.com/group/cake-php/browse%5Fthread/thread/e801b31cd3db809a I also started a thread on the google groups and someone suggested doing something like $html->link('my account', array('base' => 'https://', 'controller' => 'users')); but I couldn't get that working. Just to add, this is what is outputted when I have the above code. <a href="/users/index/base:https:/">my account</a> I think there's a bug in the cake/libs/router.php on line 850. There's a keyword 'bare' and I think it should be 'base' Though changing it to base doesn't seem to fix it. From what I gather, it's telling it to exclude those keys that are passed in so that they don't get included as parameters. But I'm puzzled as to why it's a 'bare' keyword and the only reason I can come up with is that it's a type.

    Read the article

  • Symfony fk issue on insertion

    - by Daniel Hertz
    Hi, I posted a similar problem but it could not be resolved. I create a relational database of users and groups but for some reason I cannot insert test data with fixtures properly. Here is a sample of the schema: User: actAs: { Timestampable: ~ } columns: name: { type: string(255), notnull: true } email: { type: string(255), notnull: true, unique: true } nickname: { type: string(255), unique: true } password: { type: string(300), notnull: true } image: { type: string(255) } Group: actAs: { Timestampable: ~ } columns: name: { type: string(500), notnull: true } image: { type: string(255) } type: { type: string(255), notnull: true } created_by_id: { type: integer } relations: User: { onDelete: SET NULL, class: User, local: created_by_id, foreign: id, foreignAlias: groups_created } FanOf: actAs: { Timestampable: ~ } columns: user_id: { type: integer, primary: true } group_id: { type: integer, primary: true } relations: User: { onDelete: CASCADE, local: user_id, foreign: id, foreignAlias: fanhood } Group: { onDelete: CASCADE, local: group_id, foreign: id, foreignAlias: fanhood } And this is the data i try to input: User: user1: name: Danny email: [email protected] nickname: danny password: f05050400c5e586fa6629ef497be Group: group1: name: Mets type: sports FanOf: fans1: user_id: user1 group_id: group1 I keep getting this error: SQLSTATE[23000]: Integrity constraint violation: 1452 Cannot add or update a child row: a foreign key constraint fails (`krowdd`.`fan_of`, CONSTRAINT `fan_of_user_id_user_id` FOREIGN KEY (`user_id`) REFERENCES `user` (`id`) ON DELETE CASCADE) The users and groups are clearly being created before the "fanhood" is so why am I getting this error?? Thanks!

    Read the article

  • C# Regex stops after first line matched

    - by JD Guzman
    Ok so I have a regex and I need it to find matches in a multiline string. This is the string I am using: Device Identifier: disk0 Device Node: /dev/disk0 Part of Whole: disk0 Device / Media Name: OCZ-VERTEX2 Media Volume Name: Not applicable (no file system) Mounted: Not applicable (no file system) File System: None Content (IOContent): GUID_partition_scheme OS Can Be Installed: No Media Type: Generic Protocol: SATA SMART Status: Verified Total Size: 240.1 GB (240057409536 Bytes) (exactly 468862128 512-Byte-Blocks) Volume Free Space: Not applicable (no file system) Device Block Size: 512 Bytes Read-Only Media: No Read-Only Volume: Not applicable (no file system) Ejectable: No Whole: Yes Internal: Yes Solid State: Yes OS 9 Drivers: No Low Level Format: Not supported Basically I need to separate each line into two groups with the colon as the separator. The regex I am using is: @"([A-Za-z0-9\(\) \-\/]+):([A-Za-z0-9\(\) \-\/]+).*" It does work but only picks up the first line and separates it into the two groups like I want but it stops at that point. I have tried the Multiline option but it doesn't make any difference. I must admit I am new to the regex world. Any help is appreciated.

    Read the article

  • EF4 and multiple abstract levels

    - by Cedric
    I need to use inheritance with EF4 and the TPH model created from DB. I created a new projet to test simples classes. There is my class model: There is my table in SQL SERVER 2008 : VEHICLE ID : int PK Owner : varchar(50) Consumption : float FirstCirculationDate : date Type : varchar(50) Discriminator : varchar(10) I added a condition in my EDMX on the Discriminator field to differentiate the Scooter, Car, Motorbike and Bike entities. MotorizedVehicle and Vehicle are Abstract. But when I compile, this error appears : Error 3032: Problem in mapping fragments starting at lines 78, 85:EntityTypes EF4InheritanceModel.Scooter, EF4InheritanceModel.Motorbike, EF4InheritanceModel.Car, EF4InheritanceModel.Bike are being mapped to the same rows in table Vehicle. Mapping conditions can be used to distinguish the rows that these types are mapped to. Edit : To Ladislav : I try it and error change to become it for all of my entities : Error 3034: Problem in mapping fragments starting at lines 72, 86:An entity is mapped to different rows within the same table. Ensure these two mapping fragments do not map two groups of entities with overlapping keys to two distinct groups of rows. To Henk (with Ladislay suggestion) : There are all of mappings details : What's wrong ? Thanks

    Read the article

  • MVVM and Ribbon Command

    - by user312372
    I am trying to change the source property of the frame in Page1.xaml when the SampleCommand is excecuted. How do I acheive this in the View Model? Page1.xaml: <r:RibbonTab.Groups> <r:RibbonGroup GroupSizeDefinitions="{StaticResource RibbonLayout}"> <r:RibbonGroup.Command> <r:RibbonCommand LabelTitle="RibbonButton"/> </r:RibbonGroup.Command> <r:RibbonButton x:Name="RibbonButton1" Command="{Binding Path=SampleCommand}"/> </r:RibbonGroup> </r:RibbonTab.Groups> </r:RibbonTab> </r:Ribbon> <Border Name="PageBorder" Grid.Row="0" Grid.Column="1"> <Frame Name="pageFrame" Source="FirstPage.xaml" /> </Border> </DockPanel> c# Page1ViewModel.cs: RelayCommand _sampleCommand; public ICommand SampleCommand { get { // create command ?? return _sampleCommand } page1.xaml.cs : Page1ViewModel pageViewModel; this.DataContext = pageViewModel; // when pageloads

    Read the article

  • Renaming TurboGears 2's Repoze Fields with TGAdmin

    - by William Chambers
    I've been working on renaming TurboGears 2's Repoze 'groups' field to 'roles' to free the namespace and db tables for other purposes. Also roles makes much more sense to me then groups because I have a strong Drupal background. Now I have found some of the docs to do this such as these: http://www.turbogears.org/2.1/docs/main/Auth/Customization.html#customizing-the-model-structure-assumed-by-the-quickstart http://code.gustavonarea.net/repoze.what-quickstart/#customizing-the-model-definition However these only go part of the way. I have made (I'm pretty sure at least, I've double checked a few times.) all the changes required as you can see in this diff. This seems to work fine however I've ran into a rather major issue with the TurboGears Admin system. I've tried http://turbogears.org/2.0/docs/main/Extensions/Admin/index.html and it didn't seem to make any difference, however I'm not 100% sure I did it correctly. The problem occurs when I attempt to go to localhost/admin/permissions/. It causes a Internal Server Error and outputs the following error. http://pastebin.com/YWMH3SiU This error does not happen on the Roles/Users pages and the permissions /edit/1 also works. I'm running kubuntu 10.04 with TG 2.1b2. (I'm running the beta mostly for easier mako support which is really important.) Any help would be very appreciated.

    Read the article

  • Plotting andrews curves of subsets of a data frame on the same plot

    - by user2976477
    I have a data frame of 12 columns and I want to plot andrews curves in R of this data, basing the color of the curves on the 12th columns. Below are a few samples from the data (sorry the columns are not aligned with the numbers) Teacher_explaining Teacher_enthusiastic Teacher_material_interesting Material_stimulating Material_useful Clear_marking Marking_fair Feedback_prompt Feedback_clarifies Detailed_comments Notes Year 80 80 80 80 85 85 80 80 80 80 70 3 70 60 30 40 70 60 30 40 70 0 30 3 100 90 90 80 80 100 100 90 100 100 100 MSc 85 85 85 90 90 70 90 50 70 80 100 MSc 90 50 90 90 90 70 100 50 80 100 100 4 100 80 80 75 90 80 80 50 80 80 90 3 From this data I tried to plot andrews curves using the code below: install.packages("andrews") library(andrews) col <- as.numeric(factor(course[,12])) andrews(course[,1:12], clr = 12) However, the 12th column has three groups (3 types of responses) and I want to group two of them and then plot the andrews curve of the data, without editing my data frame in Excel. x <- subset(course, Year == "MSc" & "4") y <- subset(course, Year == "3") I tried the above code, but my argument for x don't work. "MSc", "3" and "4" are the groups in the 12th column, and I want to group MSc and 4 so that their Andrews curves have the same color. If you have any idea how to do this, please let me know.

    Read the article

  • Doxygen: grouping documentation by folder in a multi-project codebase

    - by John
    In one project, some pages were added - it was a new project in which doxygen was being tested properly - adding comments & pages - rather than simply auto-generating docs from our existing code-base. The problem is when doxygen is run on the main code-base, that project's pages show up at a top level. e.g they have a main-page and some sub-pages. But what we'd want is all those pages pushed down one level so you have main-project-main-project-pages. One question is what happens if multiple projects have a main-page? Do they get combined, or throw errors? Another question is if you can tell doxygen to use paths and containing folders to auto-generate groups or sections or page-hierarchies in some way? Going through all out projects to properly assign classes to groups is a mammoth task, so ideally everything in a directory would get put in a group of that name, as a way to make the documentation of non-doxygen codebases better. Sorry my question is a bit vague, the problem is even after reading the docs the terminology isn't totally clear yet. Hopefully the kind of question I'm asking is clear, if not I'll try to cobble an example file-structure together.

    Read the article

  • Deleting objects with FK constraints in Spring/Hibernate

    - by maxdj
    This seems like such a simple scenario to me, yet I cannot for the life of my find a solution online or in print. I have several objects like so (trimmed down): @Entity public class Group extends BaseObject implements Identifiable<Long> { private Long id; private String name; private Set<HiringManager> managers = new HashSet<HiringManager>(); private List<JobOpening> jobs; @ManyToMany(fetch=FetchType.EAGER) @JoinTable( name="group_hiringManager", joinColumns=@JoinColumn(name="group_id"), inverseJoinColumns=@JoinColumn(name="hiringManager_id") ) public Set<HiringManager> getManagers() { return managers; } @OneToMany(mappedBy="group", fetch=FetchType.EAGER) public List<JobOpening> getJobs() { return jobs; } } @Entity public class JobOpening extends BaseObject implements Identifiable<Long> { private Long id; private String name; private Group group; @ManyToOne @JoinColumn(name="group_id", updatable=false, nullable=true) public Group getGroup() { return group; } } @Entity public class HiringManager extends User { @ManyToMany(mappedBy="managers", fetch=FetchType.EAGER) public Set<Group> getGroups() { return groups; } } Say I want to delete a Group object. Now there are dependencies on it in the JobOpening table and in the group_hiringManager table, which cause the delete function to fail. I don't want to cascade the delete, because the managers have other groups, and the jobopenings can be groupless. I have tried overriding the remove() function of my GroupManager to remove the dependencies, but it seems like no matter what I do they persist, and the delete fails! What is the right way to remove this object?

    Read the article

  • SWT: scrollable area within a tab

    - by DaveJohnston
    I am trying to add a scrollable area to my tabbed window. So far I have a CTabFolder in a shell. I have added 5 CTabItems to it and everything works as expected. On one of my CTabItems the contents are too big to fit on the screen so I would like to be able to scroll. The contents is a collection of Groups each containing various widgets. So the CTabFolder is created as follows: CTabFolder tabs = new CTabFolder(shell, SWT.BORDER); tabs.setSimple(false); tabs.setUnselectedImageVisible(false); tabs.setUnselectedCloseVisible(false); tabs.setMinimizeVisible(false); tabs.setMaximizeVisible(false); FormData tabsLayoutData = new FormData(); tabsLayoutData.top = new FormAttachment(0, 5); tabsLayoutData.left = new FormAttachment(0, 5); tabsLayoutData.bottom = new FormAttachment(92, 0); tabsLayoutData.right = new FormAttachment(100, -5); tabs.setLayoutData(tabsLayoutData); Then the CTabItem: CTabItem tab = new CTabItem(tabs, SWT.NONE); tab.setText("Role"); Then the contents: Composite tabArea = new Composite(tabs, SWT.V_SCROLL); tabArea.setLayout(new FormLayout()); tab.setControl(tabArea); So the groups contained within the tab are created with tabArea as the parent and everything appears as you would expect. The problem is though that the vertical scroll bar is always present but doesn't seem to do anything. The contents are chopped off at the bottom of the tabArea composite. Is there anything else I need to do to get the scrolling to work properly?

    Read the article

  • Group / User based security. Table / SQL question

    - by Brett
    Hi, I'm setting up a group / user based security system. I have 4 tables as follows: user groups group_user_mappings acl where acl is the mapping between an item_id and either a group or a user. The way I've done the acl table, I have 3 columns of note (actually 4th one as an auto-id, but that is irrelevant) col 1 item_id (item to access) col 3 user_id (user that is allowed to access) col 3 group_id (group that is allowed to access) So for example item1, peter, , item2, , group1 item3, jane, , so either the acl will give access to a user or a group. Any one line in the ACL table with either have an item - user mapping, or an item group. If I want to have a query that returns all objects a user has access to, I think I need to have a SQL query with a UNION, because I need 2 separate queries that join like.. item - acl - group - user AND item - acl - user This I guess will work OK. Is this how its normally done? Am I doing this the right way? Seems a little messy. I was thinking I could get around it by creating a single user group for each person, so I only ever deal with groups in my SQL, but this seems a little messy as well..

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >