Search Results

Search found 9611 results on 385 pages for 'low power'.

Page 41/385 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• Windows 7 remains powered on when restarting

  - by BombDefused

  I'm running windows 7 x64 on an MSI P67A-GD53 motherboard, in an Antec P280 Super Midi Towercase with a Corsair 650w PSU. I've just installed a second instance of windows 7 x64 on a separate disk (this is to keep my games separate from my work OS). The problem is that it appears now that I cannot restart from either instance of Windows 7. The shut down command, and sleep commands work as expected. When I try to restart, the shutdown happens but the system never reboots. Everything remains powered on, until I hold down the power button to force the power off. Ithink (but am not 100% sure) this has only started since I installed the second OS, and am assuming this has something to do with the motherboard needing to know which OS to run up again? Some other forums I've read suggest that the PSU has a major role in restart and could be at fault. Changing the boot order of the disks in the BIOS does not change anything. Any suggestions greatfully recieved! Update: I now have a reproduceable issue: I think the secondary OS install may have been a red herring. It was when windows tried to reboot during the install that I noticed the issue. After playing around with installing drivers, and rebooting many many times, I have found that it is the OC genie setting on the MSI motherboard that seems to trigger the problem. This makes sense as I only started using the OC genie feature a couple of weeks ago, and probably hadn't used restart in that time. However... simply turning off OC genie does not make the issue go away. I have to turn off OC genie, shutdown, start enter bios, go to the "Save and Exit" menu "Restore Defaults" yes to "Load optimized defaults", which will reset to clear the problem. Now when the PC boots into windows, I can restart as normal (and from the OS on either HDD). I only know how to control the issue, and don't still know the root cause. I'd like to be able to use the OC genie function if anyone can suggest a why I'm seeing this problem. Could it be that I'm drawing too much power when using OC feature?

  Read the article

• How to detect APC UPS battery usage and run a script when on battery

  - by Andy Arismendi

  I have a couple APC UPS - Smart-UPS RT 6000 RM XL Smart-UPS RT 5000 RM XL Unfortunately the power in my office likes to go out (out of my control) and hence the equipment powered by these UPS shuts down. They power a VMware infrastructure environment (VMware Lab Manager) and what I'd like to do is detect when one is on battery (say has been for x amount of time or has x percentage left) and run a script on this event. What software do I need to detect a on-battery event and have it run a script? Thanks!

  Read the article

• Using Xbox 360 controller with Mac OS X (specifically turning it off)

  - by Bob King

  So I've been using this driver for a few months with the Xbox 360 Wireless Controller For Windows with my Mac Mini. Here's an article about the driver on Gizmodo. The driver works really well for actually using the controller, but there doesn't seem to be a way to power off the controller without pulling the batteries. Does anyone know of a replacement driver that includes power-off capabilities, or know of some other undocumented way to turn the controller off? Note: I've been having problems getting to the site, but it could be our corporate filtering.

  Read the article

• OpenVPN bandwith restrictrictions and cpu power needed

  - by user197664

  In Open VPN is there a way to set a maximum limit of data and speed per user? Say user "reptar' is abusing the VPN and I wanted to limit his/her speeds and/or data how would one go about doing this? Would I need to know the IP address of the abuser? Also, I have seen articles around the internet about turing a Rasberry PI in to a VPN server. If I did such a thing how many users would this device be able to handle at a given time? I believe it runs at 512 gb and clocks at around 700 mhz.

  Read the article

• HP dv6000 laptop powers on only if plugged in

  - by Ben

  My HP dv6000 laptop will not run on battery power. It will only run while plugged into the wall. I have already replaced the battery, but it still will not operate on battery power. The problem began slowly. The original battery's life got shorter and shorter, until eventually it would only last ~45 seconds before going into hibernation. Finally, the battery would not work at all, so I threw it out and just used it without a battery. I bought a replacement recently.... but the problem persists. When I connect the new battery to the system, the "charging" light turns on for about 30 seconds, then goes dark. I'm assuming there's something wrong with the internal charging circuitry? If this is the case, how would I go about fixing this, short of buying a new motherboard? If anyone could give me some assistance in confirming/rejecting my diagnosis I'd be very appreciative! :)

  Read the article

• Mother Board Question

  - by user33931

  1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

  Read the article

• Is there a way to display multiple power point documents in separate power point windows?

  - by Chris Reynolds

  In Microsoft PowerPoint 2007, when opening multiple .pptx/.ppt documents simultaneously, the documents are opened in the same physical PowerPoint window. I was wondering if anyone was aware of a way to separate these documents into separate physical windows. I am aware that you can arrange and cascade separate documents within the same PowerPoint window, but I find that method a bit awkward and frustrating (especially when juggling more than two documents simultaneously).

  Read the article

• Intel mobile CPU consumption at idle levels?

  - by Ivan Petrushev

  Hello, I was wondering if someone has observations (or specifications) of different mobile processors power consumption levels when idle? Let's define 'idle' with 'browsing web sites trough wifi, no flash, no multitasking'. There are different series processors, recognizable by their first letter. The letter tells about the maximum TDP. For example: T - 30-39W P - max 25W L - 12-19W U - <12W source However this is about maximum consumptions during load. Is there any difference in power levels when the CPU is idling?

  Read the article

• Windows server's HDD Spin down daily/nightly - Does it makes sense?

  - by Riccardo

  A Windows Server 2003 R2 has the following hard disk configuration: - 3 internal hard disks attached to a 3Ware unit, configured in Raid 1 + spare unit - 3 external USB backup disks: 2 Verbatim 1TB (Samsung HD103SI) + 1 Western Digital 1TB (WD10EADS) The server runs 365 days per year, h24, however: - at daytime the server/user usage is limited to the internal hard disks - at nighttime there's no user usage, apart from scheduled maintenance tasks, basically the Server will be idle from 7PM to 8AM. apart from nighly backups (few hours). I was wondering if: (a) it makes any sense let Windows manage power savings, allowing disks to spin down accordingly, ** OR** let the disks stay awlays-on, to avoid permature wearing, due to continuous spin up/down (b) leave internal disks always on, and force external disks to power down while idle (this requires third party tools, such as Verbatim's Green button utility) Your thoughts?

  Read the article

• How to power off a Debian Linux box via console

  - by Luke Puplett

  Brand new to Linux. I need to turn my box off and put it in my server room. The help here and everywhere seems not to work for me: http://debianhelp.co.uk/shutdown.htm I get: lukepuplett@uktnlx01:~$ poweroff -bash: poweroff: command not found lukepuplett@uktnlx01:~$ shutdown -bash: shutdown: command not found lukepuplett@uktnlx01:~$ modprobe apm -bash: modprobe: command not found lukepuplett@uktnlx01:~$ I also tried halt, reboot, goaway, and pleasejustwork.

  Read the article

• Power Pivot - Average time per item

  - by Username

  I'm trying to calculate on average, how long it takes to make each item. Here is the data table: Date Item Quantity Operator 01/01/2014 Item1 3 John 01/01/2014 Item2 5 John 02/01/2014 Item1 7 Bob 02/01/2014 Item2 4 John 03/01/2014 Item1 2 Bob 07/01/2014 Item2 3 John On 01/01/2014 John made 3 of Item 1 and 5 of Item 2. If we only had the first 2 rows we can guess that it takes 0.375 days to make Item 1 and 0.625 days to make Item 2. I want to be able to calculate this on average using all the data and taking in to account the operators obviously working on different items. Thank you

  Read the article

• CPU fan twitching phase leds blinking - computer won't boot

  - by SooX

  I have a big problem that I got today. Yesterday computer was "on" normally, I went to sleep without shutting it down. When I woke up, I heard a strange sound and was unable to bring it up from hibernate. I unplugged the PSU. When I plugged the PSU back in, the sound came back. When I opened the case, I saw the fan "twitching" like it is about to start and fan LEDs were blinking. Also, motherboard LEDs were blinking in the same pattern - the first green one has more of luminosity then others. When I cut down the power with 0/1 button on PSU, the fans continue to make sounds like the machine is trying to boot before the capacitors run out and the power dies. Does anyone have a clue what to do? I tried disassembling everything but that doesn't work. I will try with friend's PSU later today.

  Read the article

• Disable or sleep secondary hard drive in Macbook

  - by cpak

  I've done some quick Googling but didn't find an answer. I've put an SSD in my Macbook, and at the same time moved the original hard drive to the optical drive bay. I'm running the OS and most of my daily apps off the SDD so the hard drive is really just for storing stuff I need now and then. Now I'd like to disable (as in power off or "force sleep") the hard drive when I don't need it. Tried unmounting the disk using diskutil unmountDisk but it kept spinning for like 10 minutes. Maybe that's to be expected, but I'd imagined it would stop instantly on unmount. Also, it would be nice to have it disabled by default, and only mount it (= power on) when I need it.

  Read the article

• replacement drive cage for power edge R710

  - by bumble_bee_tuna

  Hi I'm performance tuning a DB server its a Dell R710 there is a very significant I/O bottleneck. Unfortunately the server was purchased with the 6 x 3.5 inch sata configuration which doesn't give me the leeway I need to address the issue. Before going to DAS does anyone know if it is possible to purchase a replacement front drive enclosure ? I know the server is configurable with something like 12 or 16 2.5 inch drives and it appears to be modular ? I tired contacting dell but the offshore parts department reps are not very bright lol. Thanks.

  Read the article

• Is it better to always purchase as much as higher in Watts SMPS, for PC?

  - by metal gear solid

  Is it better to always purchase as much as higher in Watts SMPS, for PC? Does higer watts SMPS also consume more power (electricity bill)? How to know how much watts of SMPS we should purchase? What are factor who decide how much watt of power will need? I'm going to purchase a new Motherboard + CPU + HDD + RAM + DVD Wrtiter + SATA 500 GB HDD ? I'm not purchasing any external Graphic Card. How to decide which watt of SMPS ,I should purchase?

  Read the article

• Disable or sleep secondary HDD in Macbook

  - by cpak

  I've done some quick Googling but didn't find an answer. I've put an SSD in my Macbook, and at the same time moved the original HDD to the optical drive bay. I'm running the OS and most of my daily apps off the SDD so the HDD is really just for storing stuff I need now and then. Now I'd like to disable (as in power off or "force sleep") the HDD when I don't need it. Tried unmounting the disk using diskutil unmountDisk but it kept spinning for like 10 minutes. Maybe that's to be expected, but I'd imagined it would stop instantly on unmount. Also, it would be nice to have it disabled by default, and only mount it (= power on) when I need it. Grateful for any input on this!

  Read the article

• How much processing power is required while downloading data from a high speed internet connection (

  - by avanish

  I was just wondering about the CPU usage while downloading data (say, for example, a movie) from the internet. Can anyone tell me, how much is a processor really in use while downloading and, in the first place, is a processor even really required during download?

  Read the article

• Why Does My Windows 7 PC Freeze After Waking from Sleep?

  - by Blaenk

  Hey guys. I have Windows 7 running on my computer and everything is perfect. There's only one little problem. Sometimes when I leave my computer, I come back and my monitor is turned off or asleep, whichever it is. This is fine, I set it to do this. However, after turning on the monitor and moving the mouse around, the mouse cursor freezes; both the keyboard and mouse don't respond to anything, for example the keyboard's windows key won't bring up the start menu and moving the mouse around does not move the cursor around on the screen. I have to wait about a minute or two before things start working again. I figured this was a power savings setting problem, so I went into Control Panel Power Options. I only have Turn off Display = 30 minutes and Put Computer to Sleep = Never. Of course, I went into the advanced power settings to look through there. I put Never to turn off the hard disk, Sleep after never, and that's about it. Nothing else there looks like it might be causing this. I went into the device manager and checked the mouse and the keyboard, and they both have the Allow this device to wake the computer checked for both of them. Perhaps this other bit of information might help: Sometimes I VNC into my PC using my MacBook, and sometimes, as soon as it shows me the desktop, the same thing happens. The mouse won't move and VNC won't register any events on the server (Which is my PC of course). I close the client (And I know it has nothing to do with the client), then immediately restart it and try to connect. When I click the connect button, it hangs there, as if the PC is not responding. Basically it's like whenever I try to wake the computer from sleep, it does so by showing me the desktop, then it freaks out. Then again, I guess the computer isn't sleeping because the setting is set to 'Sleep after = Never'. I honestly don't know what's going on, would appreciate any insight. Thanks!

  Read the article

• Laserjet Experts: How many power cycles per month?

  - by marienbad

  I recently got a nice Laserjet 8100DN for my house. I will probably never print more than 1% of its rated monthly duty cycle. But it runs some fairly noisy fans 24/7 if it's left on, so I am in the habit of turning the machine off as soon as I'm done with it. So, for all you who have a lot of experiencing administrating workgroup LaserJets, do you think I'll end up killing it from too many on-off cycles?

  Read the article

• Dell PowerEdge 860 won't boot but gets power

  - by fierflash

  I have a Dell PowerEdge 860. Got an 2008 R2 running on it. Here is the scenario I'm currently in: I can boot it up and work as usuall. But when I restart it, it just shuts down, doesn't reboot, and it won't boot up again. Then it stays in this "mode", On/off button blinking green(standby mode?) and System Indicator LED blinking amber. If I try to press the On/Off button on the frontpanel it won't boot. It's like you can hear the fan from the PSU running but nothing else is trying to boot. If I unplug the powercable and then put it back in again it's the same, the extremley noisy fans won't start and it's just sitting there. If I let it "rest" for like 1 to 24 hours while the powercable is unplugged and I plug it in again, it boots directly, without me having to push the On/Off button. What I have tried: Run diagnostics(not the one in POST phase) and everything is fine Booting without any cables except the powercable Boot without memory installed Boot without the raidcable plugged in Cleared NVRAM Reseated all the components and cables Googling like a freak for any possible solution Tried Dell Support but I don't have any warranty left so they can't help me unless i pay some ridiculous amount of money I suppos Do anyone have some experience with the same issue? Do I need to replace something or is there any other way to determine the problem? Any help will be greatly appreciated.

  Read the article

• Redundant APC UPS units, single server set up

  - by Sholom

  Hi All We have a very simple set up, looking for a very simple (reliable) solution: Setup: One Dell box with redundant power supplies running Windows 2003, plugged into two separate APC SmartUPS 1500 units (USB, no smart cards) on two separate circuits. Solution required: IF (UPS1 = Low) AND (UPS2 = Low) THEN: Shutdown gracefully ELSE: DO NOTHING!! APCUPSD only allowes for one instance (and therefore one UPS) in a windows environment. PowerChute can't do this without using APC Smart Cards which means utilizing our switch, but the switch does not have redundant power supplies, so it will only live for as long as one of the two UPS units. And no, i don't have the budget to buy two smart cards pluse a switch with redundancy ;) Thanks

  Read the article

• Keyboard Slow on a high power machine.

  - by Tim Pierson

  I am having a terrible time with my high powered machine. The keyboard is not displaying the keys as quickly as I type. Sometimes I have to wait up to a minute for the key to display. When I type ahead it sometimes loses characters. I am not sure where to start looking for this problem. It started about a month ago and I still have not figured out why. It does not always do it. But acts up about 2-3 minutes out of ever hour of use or thereabout. How can I look to isolate and find the problem, and solve it?

  Read the article

• Power Shell does not like command

  - by Campo

  Any ideas what I did wrong here? I copied this script from a tutorial and get this error.... PS C:\Windows\system32> Get-Service | Where-Object ($_.status -eq "running") Where-Object : Cannot bind parameter 'FilterScript'. Cannot convert value "False" to type "System.Management.Automation .ScriptBlock". Error: "Invalid cast from 'System.Boolean' to 'System.Management.Automation.ScriptBlock'." At line:1 char:27 + Get-Service | Where-Object <<<< ($_.status -eq "running") + CategoryInfo : InvalidArgument: (:) [Where-Object], ParameterBindingException + FullyQualifiedErrorId : CannotConvertArgumentNoMessage,Microsoft.PowerShell.Commands.WhereObjectCommand

  Read the article

• PC don't start the and no beeps from BIOS on power on

  - by doug

  Hi there A friend just brought me hi's PC because it doesn't start. I have no bios beeps, no screen activation. The monitor stays blank and nothing is on the display. Does anyone knows how can we fix this? Any ideas? Thank you!

  Read the article

• solaris + EMC + power-path

  - by yael

  please advice - when I run powercf command on my Solaris machine , which changes this command do on the EMC storage , or on Solaris file system ? from maanual page: DESCRIPTION During system boot on Solaris hosts, the powercf utility configures PowerPath devices by scanning the HBAs for both single-ported and multiported storage system logical dev- ices. (A multiported logical device shows up on two or more HBAs with the same storage system subsystem/device identity. The identity comes from the serial number for the logical device.) For each storage system logical device found in the scan of the HBAs, powercf creates a corresponding emcpower device entry in the emcp.conf file, and it saves a primary path and an alternate primary path to that device.

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >