master notes - Page 41 - Developer IT

What is the best way to recover from a mysql replication fail?

- by Itai Ganot

Today, the replication between our master mysql db server and the two replication servers dropped. I have a procedure here which was written a long time ago and i'm not sure it's the fastest method to recover for this issue. I'd like to share with you the procedure and I'd appreciate if you could give your thoughts about it and maybe even tell me how it can be done quicker. At the master: RESET MASTER; FLUSH TABLES WITH READ LOCK; SHOW MASTER STATUS; And copy the values of the result of the last command somewhere. Wihtout closing the connection to the client (because it would release the read lock) issue the command to get a dump of the master: mysqldump mysq Now you can release the lock, even if the dump hasn't end. To do it perform the following command in the mysql client: UNLOCK TABLES; Now copy the dump file to the slave using scp or your preferred tool. At the slave: Open a connection to mysql and type: STOP SLAVE; Load master's data dump with this console command: mysql -uroot -p < mysqldump.sql Sync slave and master logs: RESET SLAVE; CHANGE MASTER TO MASTER_LOG_FILE='mysql-bin.000001', MASTER_LOG_POS=98; Where the values of the above fields are the ones you copied before. Finally type START SLAVE; And to check that everything is working again, if you type SHOW SLAVE STATUS; you should see: Slave_IO_Running: Yes Slave_SQL_Running: Yes That's it! At the moment i'm in the stage of copying the db from the master to the other two replication servers and it takes more than 6 hours to that point, isn't it too slow? The servers are connected through a 1gb switch.

Read the article

Kindle (client) for Mac--text search or highlighting/notes?

- by doug

just so we're clear, i'm talking about the client/software version here--ie, that you install on your Mac or PC--not the device. The Kindle client was recently released for the Mac. I downloaded it and bought a couple of Kindle-edition books to view on this client. Astonishingly, two features i consider to be more or less essential to any ebook reader are missing in the Kindle client, either that, or i can't find them: (i) text searching; and (ii) highlighting text. First, does anyone know how to access the search feature? I'm aware of the "Go To" button at the top middle of the reader window--the options in that menu when you click the button are: "Cover", "Table of Contents", "Beginning" and "Location." "Location" requires that you type in an integer (but it doesn't correspond to page number--e.g., typing "167" brought me to the table of contents), not a search term. Second, there's a button on the upper right-hand corner of the window "Show Notes and Marks" yet i can't find any way to highlight text. The only kind of "note" or "mark" i have been able to record is to "bookmark" a page by clicking the "bookmark" button also at the top of the window.

Read the article

So You Want to Be a Social Media Director

- by Mike Stiles

Do you want to be a Social Media Director? Some say the title is already losing its relevance; that social should be a basic skill that is required and used no matter what your position is inside the enterprise. I suppose that’s visionary, and a fun thing for thought leaders to say. But in the vast majority of business organizations, we’re so far away from that reality that the thought of not having someone driving social’s implementation and guiding its proper usage conjures up images of anarchy. That said, social media has become so broad, so catch-all, and so extended across business functions, that today’s Social Media Director, depending on the size of their staff, must make jacks-of-all-trades look like one-trick-ponies. Just as the purview of the CMO has grown all-encompassing, the disciplines required of their heads of social are stacking up. Master of Content Every social pipeline you build must stay filled, with quantity and quality. Content takes time, and the job never stops. Never. And no, it’s not true that anybody can write. Master of Customer Experience You must have a passion for hearing from customers and making them really happy. Master of PR You must know how to communicate and leverage the trust you’ve built when crises strike. Couldn’t hurt to be a Master of Politics. Master of Social Technology So many social management tools on the market. You have to know what social tech ecosystem makes sense and avoid piecemeal point solutions. Master of Business Development Social for selling and prospecting is hot, and you have to know how to use social to do it. Master of Analytics Nothing else matters if you can’t prove social is helping the brand. That’s right, creative content guy has to also be a math and stats geek. Good luck with that. Master of Paid Media You’ve got to learn the language, learn the tactics, learn the vendors and learn how to measure results. Master of Education Guess who gets to teach everyone who has no clue how to use social for business. Master of Personal Likability You’ll be leading the voice, tone, image and personality of the brand. If you don’t instinctively know how to be liked by actual people, the brand will be starting from a deficit. How deep must you go in this parade of masteries? Again, that depends on your employer’s maturity level in social. Serious players recognize these as distinct disciplines requiring true experts for maximum effect. Less serious players will need you to execute personally in many of these areas. Do the best you can, and try to grow quickly at each. If you’re the sole person executing all social…well…you’re in the game of managing expectations and trying to socially educate your employer. The good news is, you should be making a certifiable killing. If you’re alone and your salary is modest, time to understand how many brands out there crave what you’ve mastered. Not to push back against thought leaders, but the need for brand social leadership has not gone away…not even a little bit. @mikestiles @oraclesocialPhoto: Stefan Wagner, freeimages.com

Read the article

Which mobile device is appropriate as a utility tool for a web master?

- by Kayle

Basically, I'm looking for a device to use on the road and I would prefer to not have to sit down for the majority of the tasks (which rules out netbooks, in my mind). I'm also hoping to spend less than $500. This is what I'd like to "capably" be able to do on the device: Browse the web in non-mobile format, flash is a plus Email, chat, etc Have access to a decent text editor and ftp OR a browser that supports BESPIN/ACE Some sort of SSH support I'm looking at rooted Android phones and iPhone/iPads... though the phone aspect is only icing (it would be cool to consolidate the two devices and have net access through cell networks, but I'm not married to the idea). Are there cheap linux tablets that are ready for prime-time yet? I suppose that would be ideal. All suggestions welcome!

Read the article

Master Data and Data Quality - Do You Really Know Your Customer?

- by Mala Narasimharajan

How well do you know your customer? Data Quality and MDM go hand-in-hand when it comes to fully knowing your customers and information related to the Take a look at this video and see why customer data needs a consolidated management strategy that incorporates data quality. Oracle MDM, specifically Oracle Customer Hub enables enterprises to truly understand their customers and ensure a single, trusted view for any customer. It offers the most complete MDM application suite in the marketplace. For more information on Oracle MDM and Oracle Enterprise Data Quality visit us on the web.

Read the article

Git: HEAD has disappeared, want to merge it into master.

- by samgoody

The top image is the output of: git reflog. The bottom is what GITK in GIT GUI (msysgit) shows me when I look at all branch history. The last few commits do not show on GIT GUI. Why do they not show on GITK (at least as a branch or something)? How do I merge them into master? I gather this happened when I checked out tag 0.42. Why is that not the same as master? (I had tagged the master in its latest state) When I click push, why does the remote repo claim to be up to date.. shouldn't it try to update these commits into whatever branch they are in? The first of the questions is important - I would like to begin to understand what GIT is thinking. It's more oracle than logic at this point. If it makes a difference to see the earlier history, the project is a [pretty powerful] JS color picker that can be viewed here in its entirety.

Read the article

How should approach allowing users to create notes with revisions?

- by Magicked

I'm working on a Rails project where I want to allow users to create individual notes, which are really just text fields at this time. With each note, the user can edit what they have previously written, but the old version is kept in a revision table. I'm trying to figure out the best way to approach this. My initial thoughts are to have the following relationships: class User < ActiveRecord::Base has_many :notes end class Note < ActiveRecord::Base has_many :note_revisions belongs_to :user end class NoteRevision < ActiveRecord::Base belongs_to :note_revision end The Note model will only contain a timestamp of when the note was first created. The NoteRevision model will contain the text, as well as a timestamp for each revision. This way, every time a new revision is made, a new entry is created into the NoteRevision table which is tracked through the Note table. Hopefully this makes sense! First, does this look like a good way to do this? If so, I'm having trouble figuring out how the controller and view will present this information in one form. Are there any good tutorials or has someone seen anything similar that can point me in the right direction? Thanks in advance!

Read the article

GIT: head has dissapeared, want to merge it into master.

- by samgoody

The top image is the output of: git reflog. The bottom is what GITK in GIT GUI (msysgit) shows me when I look at all branch history. The last few commits do not show on GIT GUI. Why do they not show on GITK (at least as a branch or something)? How do I merge them into master? I gather this happened when I checked out tag 0.42. Why is that not the same as master? (I had tagged the master in its latest state) When I click push, why does the remote repo claim to be up to date.. shouldn't it try to update these commits into whatever branch they are in? The first of the questions is important - I would like to begin to understand what GIT is thinking. It's more oracle than logic at this point. If it makes a difference to see the earlier history, the project is a [pretty powerful] JS color picker that can be viewed here in its entirety.

Read the article

Database cluster... without Master/Slave?

- by RadiantHex

Hi there! I'm wondering if it is possible to have a set of SQLdb servers to which data is written and have them replicate, avoiding conflicting information. I imagine that a Master/Slave structure would be mandatory, I would like to know if a system where servers have no hierarchy could support replication. Currently I'm using MySQL, but I would be happy to move to another database if needed. Any ideas? :)

Read the article

Mac disk images: any real difference between 'master' and 'compressed'?

- by Rabarberski

When creating a disk image (.cdr or .dmg) from a physical CD or DVD on Mac (using Disk Utility New Image) one can choose between 'CD\DVD Master‘ and 'compressed'. Apart from the obvious fact that a compressed image will be smaller, are there other differences? Will a compressed image for example not expand to an exact copy of the CD or DVD?

Read the article

Can a BIND server be a slave to a non-BIND master DNS server?

- by Michael Neale

If I have a master DNS that is not bind - can bind still slave to it? (ie does it use the DNS protocol or something else?). Kind of related - but do people still do this or do they use some other form of data replication to keep DNS records in sync to the slaves (ie file/database copying)? I would like to have the slaves refreshed as fast as possible so I am thinking normal slaving with is expiry/poll based might not be optimal?

Read the article

What's the importance of restoring SQL Server system databases (model, master, etc.)?

- by Zero Subnet

I had to restore some production databases to a different drive on the same Microsoft SQL Server 2005 machine. That worked fine and the application using the databases is back online. However, i have not restored the system (or default?) databases that SQL Server creates on its own (model, master, etc.). My question is, what is the role of these databases? and how important it is that i restore them?

Read the article

Unable to install Xdebug

- by burnt1ce

I've registered xdebug in php.ini (as per http://xdebug.org/docs/install) but it's not showing up when i run "php -m" or when i get a test page to run "phpinfo()". I've just installed the latest version of XAMPP. Can anyone provide any suggestions in getting xdebug to show up? This is what i get when i run phpinfo(). **PHP Version 5.3.1** System Windows NT ANDREW_LAPTOP 5.1 build 2600 (Windows XP Professional Service Pack 3) i586 Build Date Nov 20 2009 17:20:57 Compiler MSVC6 (Visual C++ 6.0) Architecture x86 Configure Command cscript /nologo configure.js "--enable-snapshot-build" Server API Apache 2.0 Handler Virtual Directory Support enabled Configuration File (php.ini) Path no value Loaded Configuration File C:\xampp\php\php.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) PHP API 20090626 PHP Extension 20090626 Zend Extension 220090626 Zend Extension Build API220090626,TS,VC6 PHP Extension Build API20090626,TS,VC6 Debug Build no Thread Safety enabled Zend Memory Manager enabled Zend Multibyte Support disabled IPv6 Support enabled Registered PHP Streams https, ftps, php, file, glob, data, http, ftp, compress.zlib, compress.bzip2, phar, zip Registered Stream Socket Transports tcp, udp, ssl, sslv3, sslv2, tls Registered Stream Filters convert.iconv.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, dechunk, zlib.*, bzip2.* This program makes use of the Zend Scripting Language Engine: Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies PHP Credits Configuration apache2handler Apache Version Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Apache API Version 20051115 Server Administrator postmaster@localhost Hostname:Port localhost:80 Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100 Timeouts Connection: 300 - Keep-Alive: 5 Virtual Server No Server Root C:/xampp/apache Loaded Modules core mod_win32 mpm_winnt http_core mod_so mod_actions mod_alias mod_asis mod_auth_basic mod_auth_digest mod_authn_default mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_cgi mod_dav mod_dav_fs mod_dav_lock mod_dir mod_env mod_headers mod_include mod_info mod_isapi mod_log_config mod_mime mod_negotiation mod_rewrite mod_setenvif mod_ssl mod_status mod_autoindex_color mod_php5 mod_perl mod_apreq2 Directive Local Value Master Value engine 1 1 last_modified 0 0 xbithack 0 0 Apache Environment Variable Value MIBDIRS C:/xampp/php/extras/mibs MYSQL_HOME C:\xampp\mysql\bin OPENSSL_CONF C:/xampp/apache/bin/openssl.cnf PHP_PEAR_SYSCONF_DIR C:\xampp\php PHPRC C:\xampp\php TMP C:\xampp\tmp HTTP_HOST localhost HTTP_CONNECTION keep-alive HTTP_USER_AGENT Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 HTTP_CACHE_CONTROL max-age=0 HTTP_ACCEPT application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_ACCEPT_ENCODING gzip,deflate,sdch HTTP_ACCEPT_LANGUAGE en-US,en;q=0.8 HTTP_ACCEPT_CHARSET ISO-8859-1,utf-8;q=0.7,*;q=0.3 PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin SystemRoot C:\WINDOWS COMSPEC C:\WINDOWS\system32\cmd.exe PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH WINDIR C:\WINDOWS SERVER_SIGNATURE <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> SERVER_SOFTWARE Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 SERVER_NAME localhost SERVER_ADDR 127.0.0.1 SERVER_PORT 80 REMOTE_ADDR 127.0.0.1 DOCUMENT_ROOT C:/xampp/htdocs SERVER_ADMIN postmaster@localhost SCRIPT_FILENAME C:/xampp/htdocs/test.php REMOTE_PORT 3275 GATEWAY_INTERFACE CGI/1.1 SERVER_PROTOCOL HTTP/1.1 REQUEST_METHOD GET QUERY_STRING no value REQUEST_URI /test.php SCRIPT_NAME /test.php HTTP Headers Information HTTP Request Headers HTTP Request GET /test.php HTTP/1.1 Host localhost Connection keep-alive User-Agent Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 Cache-Control max-age=0 Accept application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Encoding gzip,deflate,sdch Accept-Language en-US,en;q=0.8 Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.3 HTTP Response Headers X-Powered-By PHP/5.3.1 Keep-Alive timeout=5, max=80 Connection Keep-Alive Transfer-Encoding chunked Content-Type text/html bcmath BCMath support enabled Directive Local Value Master Value bcmath.scale 0 0 bz2 BZip2 Support Enabled Stream Wrapper support compress.bz2:// Stream Filter support bzip2.decompress, bzip2.compress BZip2 Version 1.0.5, 10-Dec-2007 calendar Calendar support enabled com_dotnet COM support enabled DCOM support disabled .Net support enabled Directive Local Value Master Value com.allow_dcom 0 0 com.autoregister_casesensitive 1 1 com.autoregister_typelib 0 0 com.autoregister_verbose 0 0 com.code_page no value no value com.typelib_file no value no value Core PHP Version 5.3.1 Directive Local Value Master Value allow_call_time_pass_reference On On allow_url_fopen On On allow_url_include Off Off always_populate_raw_post_data Off Off arg_separator.input & & arg_separator.output & & asp_tags Off Off auto_append_file no value no value auto_globals_jit On On auto_prepend_file no value no value browscap C:\xampp\php\extras\browscap.ini C:\xampp\php\extras\browscap.ini default_charset no value no value default_mimetype text/html text/html define_syslog_variables Off Off disable_classes no value no value disable_functions no value no value display_errors On On display_startup_errors On On doc_root no value no value docref_ext no value no value docref_root no value no value enable_dl On On error_append_string no value no value error_log no value no value error_prepend_string no value no value error_reporting 22519 22519 exit_on_timeout Off Off expose_php On On extension_dir C:\xampp\php\ext C:\xampp\php\ext file_uploads On On highlight.bg #FFFFFF #FFFFFF highlight.comment #FF8000 #FF8000 highlight.default #0000BB #0000BB highlight.html #000000 #000000 highlight.keyword #007700 #007700 highlight.string #DD0000 #DD0000 html_errors On On ignore_repeated_errors Off Off ignore_repeated_source Off Off ignore_user_abort Off Off implicit_flush Off Off include_path .;C:\xampp\php\PEAR .;C:\xampp\php\PEAR log_errors Off Off log_errors_max_len 1024 1024 magic_quotes_gpc Off Off magic_quotes_runtime Off Off magic_quotes_sybase Off Off mail.add_x_header Off Off mail.force_extra_parameters no value no value mail.log no value no value max_execution_time 60 60 max_file_uploads 20 20 max_input_nesting_level 64 64 max_input_time 60 60 memory_limit 128M 128M open_basedir no value no value output_buffering no value no value output_handler no value no value post_max_size 128M 128M precision 14 14 realpath_cache_size 16K 16K realpath_cache_ttl 120 120 register_argc_argv On On register_globals Off Off register_long_arrays Off Off report_memleaks On On report_zend_debug On On request_order no value no value safe_mode Off Off safe_mode_exec_dir no value no value safe_mode_gid Off Off safe_mode_include_dir no value no value sendmail_from no value no value sendmail_path no value no value serialize_precision 100 100 short_open_tag Off Off SMTP localhost localhost smtp_port 25 25 sql.safe_mode Off Off track_errors Off Off unserialize_callback_func no value no value upload_max_filesize 128M 128M upload_tmp_dir C:\xampp\tmp C:\xampp\tmp user_dir no value no value user_ini.cache_ttl 300 300 user_ini.filename .user.ini .user.ini variables_order GPCS GPCS xmlrpc_error_number 0 0 xmlrpc_errors Off Off y2k_compliance On On zend.enable_gc On On ctype ctype functions enabled date date/time support enabled "Olson" Timezone Database Version 2009.18 Timezone Database internal Default timezone America/New_York Directive Local Value Master Value date.default_latitude 31.7667 31.7667 date.default_longitude 35.2333 35.2333 date.sunrise_zenith 90.583333 90.583333 date.sunset_zenith 90.583333 90.583333 date.timezone America/New_York America/New_York dom DOM/XML enabled DOM/XML API Version 20031129 libxml Version 2.7.6 HTML Support enabled XPath Support enabled XPointer Support enabled Schema Support enabled RelaxNG Support enabled ereg Regex Library System library enabled exif EXIF Support enabled EXIF Version 1.4 $Id: exif.c 287372 2009-08-16 14:32:32Z iliaa $ Supported EXIF Version 0220 Supported filetypes JPEG,TIFF Directive Local Value Master Value exif.decode_jis_intel JIS JIS exif.decode_jis_motorola JIS JIS exif.decode_unicode_intel UCS-2LE UCS-2LE exif.decode_unicode_motorola UCS-2BE UCS-2BE exif.encode_jis no value no value exif.encode_unicode ISO-8859-15 ISO-8859-15 fileinfo fileinfo support enabled version 1.0.5-dev filter Input Validation and Filtering enabled Revision $Revision: 289434 $ Directive Local Value Master Value filter.default unsafe_raw unsafe_raw filter.default_flags no value no value ftp FTP support enabled gd GD Support enabled GD Version bundled (2.0.34 compatible) FreeType Support enabled FreeType Linkage with freetype FreeType Version 2.3.11 T1Lib Support enabled GIF Read Support enabled GIF Create Support enabled JPEG Support enabled libJPEG Version 7 PNG Support enabled libPNG Version 1.2.40 WBMP Support enabled XBM Support enabled JIS-mapped Japanese Font Support enabled Directive Local Value Master Value gd.jpeg_ignore_warning 0 0 gettext GetText Support enabled hash hash support enabled Hashing Engines md2 md4 md5 sha1 sha224 sha256 sha384 sha512 ripemd128 ripemd160 ripemd256 ripemd320 whirlpool tiger128,3 tiger160,3 tiger192,3 tiger128,4 tiger160,4 tiger192,4 snefru snefru256 gost adler32 crc32 crc32b salsa10 salsa20 haval128,3 haval160,3 haval192,3 haval224,3 haval256,3 haval128,4 haval160,4 haval192,4 haval224,4 haval256,4 haval128,5 haval160,5 haval192,5 haval224,5 haval256,5 iconv iconv support enabled iconv implementation "libiconv" iconv library version 1.13 Directive Local Value Master Value iconv.input_encoding ISO-8859-1 ISO-8859-1 iconv.internal_encoding ISO-8859-1 ISO-8859-1 iconv.output_encoding ISO-8859-1 ISO-8859-1 imap IMAP c-Client Version 2007e SSL Support enabled json json support enabled json version 1.2.1 libxml libXML support active libXML Compiled Version 2.7.6 libXML Loaded Version 20706 libXML streams enabled mbstring Multibyte Support enabled Multibyte string engine libmbfl HTTP input encoding translation disabled mbstring extension makes use of "streamable kanji code filter and converter", which is distributed under the GNU Lesser General Public License version 2.1. Multibyte (japanese) regex support enabled Multibyte regex (oniguruma) version 4.7.1 Directive Local Value Master Value mbstring.detect_order no value no value mbstring.encoding_translation Off Off mbstring.func_overload 0 0 mbstring.http_input pass pass mbstring.http_output pass pass mbstring.http_output_conv_mimetypes ^(text/|application/xhtml\+xml) ^(text/|application/xhtml\+xml) mbstring.internal_encoding no value no value mbstring.language neutral neutral mbstring.strict_detection Off Off mbstring.substitute_character no value no value mcrypt mcrypt support enabled Version 2.5.8 Api No 20021217 Supported ciphers cast-128 gost rijndael-128 twofish arcfour cast-256 loki97 rijndael-192 saferplus wake blowfish-compat des rijndael-256 serpent xtea blowfish enigma rc2 tripledes Supported modes cbc cfb ctr ecb ncfb nofb ofb stream Directive Local Value Master Value mcrypt.algorithms_dir no value no value mcrypt.modes_dir no value no value mhash MHASH support Enabled MHASH API Version Emulated Support ming Ming SWF output library enabled Version 0.4.3 mysql MySQL Support enabled Active Persistent Links 0 Active Links 0 Client API version 5.1.41 Directive Local Value Master Value mysql.allow_local_infile On On mysql.allow_persistent On On mysql.connect_timeout 60 60 mysql.default_host no value no value mysql.default_password no value no value mysql.default_port 3306 3306 mysql.default_socket MySQL MySQL mysql.default_user no value no value mysql.max_links Unlimited Unlimited mysql.max_persistent Unlimited Unlimited mysql.trace_mode Off Off mysqli MysqlI Support enabled Client API library version 5.1.41 Active Persistent Links 0 Inactive Persistent Links 0 Active Links 0 Client API header version 5.1.41 MYSQLI_SOCKET MySQL Directive Local Value Master Value mysqli.allow_local_infile On On mysqli.allow_persistent On On mysqli.default_host no value no value mysqli.default_port 3306 3306 mysqli.default_pw no value no value mysqli.default_socket MySQL MySQL mysqli.default_user no value no value mysqli.max_links Unlimited Unlimited mysqli.max_persistent Unlimited Unlimited mysqli.reconnect Off Off mysqlnd mysqlnd enabled Version mysqlnd 5.0.5-dev - 081106 - $Revision: 289630 $ Command buffer size 4096 Read buffer size 32768 Read timeout 31536000 Collecting statistics Yes Collecting memory statistics No Client statistics bytes_sent 0 bytes_received 0 packets_sent 0 packets_received 0 protocol_overhead_in 0 protocol_overhead_out 0 bytes_received_ok_packet 0 bytes_received_eof_packet 0 bytes_received_rset_header_packet 0 bytes_received_rset_field_meta_packet 0 bytes_received_rset_row_packet 0 bytes_received_prepare_response_packet 0 bytes_received_change_user_packet 0 packets_sent_command 0 packets_received_ok 0 packets_received_eof 0 packets_received_rset_header 0 packets_received_rset_field_meta 0 packets_received_rset_row 0 packets_received_prepare_response 0 packets_received_change_user 0 result_set_queries 0 non_result_set_queries 0 no_index_used 0 bad_index_used 0 slow_queries 0 buffered_sets 0 unbuffered_sets 0 ps_buffered_sets 0 ps_unbuffered_sets 0 flushed_normal_sets 0 flushed_ps_sets 0 ps_prepared_never_executed 0 ps_prepared_once_executed 0 rows_fetched_from_server_normal 0 rows_fetched_from_server_ps 0 rows_buffered_from_client_normal 0 rows_buffered_from_client_ps 0 rows_fetched_from_client_normal_buffered 0 rows_fetched_from_client_normal_unbuffered 0 rows_fetched_from_client_ps_buffered 0 rows_fetched_from_client_ps_unbuffered 0 rows_fetched_from_client_ps_cursor 0 rows_skipped_normal 0 rows_skipped_ps 0 copy_on_write_saved 0 copy_on_write_performed 0 command_buffer_too_small 0 connect_success 0 connect_failure 0 connection_reused 0 reconnect 0 pconnect_success 0 active_connections 0 active_persistent_connections 0 explicit_close 0 implicit_close 0 disconnect_close 0 in_middle_of_command_close 0 explicit_free_result 0 implicit_free_result 0 explicit_stmt_close 0 implicit_stmt_close 0 mem_emalloc_count 0 mem_emalloc_ammount 0 mem_ecalloc_count 0 mem_ecalloc_ammount 0 mem_erealloc_count 0 mem_erealloc_ammount 0 mem_efree_count 0 mem_malloc_count 0 mem_malloc_ammount 0 mem_calloc_count 0 mem_calloc_ammount 0 mem_realloc_count 0 mem_realloc_ammount 0 mem_free_count 0 proto_text_fetched_null 0 proto_text_fetched_bit 0 proto_text_fetched_tinyint 0 proto_text_fetched_short 0 proto_text_fetched_int24 0 proto_text_fetched_int 0 proto_text_fetched_bigint 0 proto_text_fetched_decimal 0 proto_text_fetched_float 0 proto_text_fetched_double 0 proto_text_fetched_date 0 proto_text_fetched_year 0 proto_text_fetched_time 0 proto_text_fetched_datetime 0 proto_text_fetched_timestamp 0 proto_text_fetched_string 0 proto_text_fetched_blob 0 proto_text_fetched_enum 0 proto_text_fetched_set 0 proto_text_fetched_geometry 0 proto_text_fetched_other 0 proto_binary_fetched_null 0 proto_binary_fetched_bit 0 proto_binary_fetched_tinyint 0 proto_binary_fetched_short 0 proto_binary_fetched_int24 0 proto_binary_fetched_int 0 proto_binary_fetched_bigint 0 proto_binary_fetched_decimal 0 proto_binary_fetched_float 0 proto_binary_fetched_double 0 proto_binary_fetched_date 0 proto_binary_fetched_year 0 proto_binary_fetched_time 0 proto_binary_fetched_datetime 0 proto_binary_fetched_timestamp 0 proto_binary_fetched_string 0 proto_binary_fetched_blob 0 proto_binary_fetched_enum 0 proto_binary_fetched_set 0 proto_binary_fetched_geometry 0 proto_binary_fetched_other 0 init_command_executed_count 0 init_command_failed_count 0 odbc ODBC Support enabled Active Persistent Links 0 Active Links 0 ODBC library Win32 Directive Local Value Master Value odbc.allow_persistent On On odbc.check_persistent On On odbc.default_cursortype Static cursor Static cursor odbc.default_db no value no value odbc.default_pw no value no value odbc.default_user no value no value odbc.defaultbinmode return as is return as is odbc.defaultlrl return up to 4096 bytes return up to 4096 bytes odbc.max_links Unlimited Unlimited odbc.max_persistent Unlimited Unlimited openssl OpenSSL support enabled OpenSSL Library Version OpenSSL 0.9.8l 5 Nov 2009 OpenSSL Header Version OpenSSL 0.9.8l 5 Nov 2009 pcre PCRE (Perl Compatible Regular Expressions) Support enabled PCRE Library Version 8.00 2009-10-19 Directive Local Value Master Value pcre.backtrack_limit 100000 100000 pcre.recursion_limit 100000 100000 pdf PDF Support enabled PDFlib GmbH Version 7.0.4p4 PECL Version 2.1.6 Revision $Revision: 277110 $ PDO PDO support enabled PDO drivers mysql, odbc, sqlite, sqlite2 pdo_mysql PDO Driver for MySQL enabled Client API version 5.1.41 PDO_ODBC PDO Driver for ODBC (Win32) enabled ODBC Connection Pooling Enabled, strict matching pdo_sqlite PDO Driver for SQLite 3.x enabled SQLite Library 3.6.20 Phar Phar: PHP Archive support enabled Phar EXT version 2.0.1 Phar API version 1.1.1 CVS revision $Revision: 286338 $ Phar-based phar archives enabled Tar-based phar archives enabled ZIP-based phar archives enabled gzip compression enabled bzip2 compression enabled Native OpenSSL support enabled Phar based on pear/PHP_Archive, original concept by Davey Shafik. Phar fully realized by Gregory Beaver and Marcus Boerger. Portions of tar implementation Copyright (c) 2003-2009 Tim Kientzle. Directive Local Value Master Value phar.cache_list no value no value phar.readonly On On phar.require_hash On On Reflection Reflection enabled Version $Revision: 287991 $ session Session Support enabled Registered save handlers files user sqlite Registered serializer handlers php php_binary wddx Directive Local Value Master Value session.auto_start Off Off session.bug_compat_42 On On session.bug_compat_warn On On session.cache_expire 180 180 session.cache_limiter nocache nocache session.cookie_domain no value no value session.cookie_httponly Off Off session.cookie_lifetime 0 0 session.cookie_path / / session.cookie_secure Off Off session.entropy_file no value no value session.entropy_length 0 0 session.gc_divisor 100 100 session.gc_maxlifetime 1440 1440 session.gc_probability 1 1 session.hash_bits_per_character 5 5 session.hash_function 0 0 session.name PHPSESSID PHPSESSID session.referer_check no value no value session.save_handler files files session.save_path C:\xampp\tmp C:\xampp\tmp session.serialize_handler php php session.use_cookies On On session.use_only_cookies Off Off session.use_trans_sid 0 0 SimpleXML Simplexml support enabled Revision $Revision: 281953 $ Schema support enabled soap Soap Client enabled Soap Server enabled Directive Local Value Master Value soap.wsdl_cache 1 1 soap.wsdl_cache_dir /tmp /tmp soap.wsdl_cache_enabled 1 1 soap.wsdl_cache_limit 5 5 soap.wsdl_cache_ttl 86400 86400 sockets Sockets Support enabled SPL SPL support enabled Interfaces Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject Classes AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilesystemIterator, FilterIterator, GlobIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, MultipleIterator, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RecursiveRegexIterator, RecursiveTreeIterator, RegexIterator, RuntimeException, SplDoublyLinkedList, SplFileInfo, SplFileObject, SplFixedArray, SplHeap, SplMinHeap, SplMaxHeap, SplObjectStorage, SplPriorityQueue, SplQueue, SplStack, SplTempFileObject, UnderflowException, UnexpectedValueException SQLite SQLite support enabled PECL Module version 2.0-dev $Id: sqlite.c 289598 2009-10-12 22:37:52Z pajoye $ SQLite Library 2.8.17 SQLite Encoding iso8859 Directive Local Value Master Value sqlite.assoc_case 0 0 sqlite3 SQLite3 support enabled SQLite3 module version 0.7-dev SQLite Library 3.6.20 Directive Local Value Master Value sqlite3.extension_dir no value no value standard Dynamic Library Support enabled Internal Sendmail Support for Windows enabled Directive Local Value Master Value assert.active 1 1 assert.bail 0 0 assert.callback no value no value assert.quiet_eval 0 0 assert.warning 1 1 auto_detect_line_endings 0 0 default_socket_timeout 60 60 safe_mode_allowed_env_vars PHP_ PHP_ safe_mode_protected_env_vars LD_LIBRARY_PATH LD_LIBRARY_PATH url_rewriter.tags a=href,area=href,frame=src,input=src,form=,fieldset= a=href,area=href,frame=src,input=src,form=,fieldset= user_agent no value no value tokenizer Tokenizer Support enabled wddx WDDX Support enabled WDDX Session Serializer enabled xml XML Support active XML Namespace Support active libxml2 Version 2.7.6 xmlreader XMLReader enabled xmlrpc core library version xmlrpc-epi v. 0.54 php extension version 0.51 author Dan Libby homepage http://xmlrpc-epi.sourceforge.net open sourced by Epinions.com xmlwriter XMLWriter enabled xsl XSL enabled libxslt Version 1.1.26 libxslt compiled against libxml Version 2.7.6 EXSLT enabled libexslt Version 1.1.26 zip Zip enabled Extension Version $Id: php_zip.c 276389 2009-02-24 23:55:14Z iliaa $ Zip version 1.9.1 Libzip version 0.9.0 zlib ZLib Support enabled Stream Wrapper support compress.zlib:// Stream Filter support zlib.inflate, zlib.deflate Compiled Version 1.2.3 Linked Version 1.2.3 Directive Local Value Master Value zlib.output_compression Off Off zlib.output_compression_level -1 -1 zlib.output_handler no value no value Additional Modules Module Name Environment Variable Value no value ::=::\ no value C:=C:\xampp ALLUSERSPROFILE C:\Documents and Settings\All Users APPDATA C:\Documents and Settings\Andrew\Application Data CHROME_RESTART Google Chrome|Whoa! Google Chrome has crashed. Restart now?|LEFT_TO_RIGHT CHROME_VERSION 5.0.342.8 CLASSPATH .;C:\Program Files\QuickTime\QTSystem\QTJava.zip CommonProgramFiles C:\Program Files\Common Files COMPUTERNAME ANDREW_LAPTOP ComSpec C:\WINDOWS\system32\cmd.exe FP_NO_HOST_CHECK NO HOMEDRIVE C: HOMEPATH \Documents and Settings\Andrew LOGONSERVER \\ANDREW_LAPTOP NUMBER_OF_PROCESSORS 2 OS Windows_NT PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH PROCESSOR_ARCHITECTURE x86 PROCESSOR_IDENTIFIER x86 Family 6 Model 15 Stepping 10, GenuineIntel PROCESSOR_LEVEL 6 PROCESSOR_REVISION 0f0a ProgramFiles C:\Program Files PROMPT $P$G QTJAVA C:\Program Files\QuickTime\QTSystem\QTJava.zip SESSIONNAME Console sfxcmd "C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe" sfxname C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe SystemDrive C: SystemRoot C:\WINDOWS TEMP C:\DOCUME~1\Andrew\LOCALS~1\Temp TMP C:\DOCUME~1\Andrew\LOCALS~1\Temp USERDOMAIN ANDREW_LAPTOP USERNAME Andrew USERPROFILE C:\Documents and Settings\Andrew VS100COMNTOOLS C:\Program Files\Microsoft Visual Studio 10.0\Common7\Tools\ windir C:\WINDOWS AP_PARENT_PID 2216 PHP Variables Variable Value _SERVER["MIBDIRS"] C:/xampp/php/extras/mibs _SERVER["MYSQL_HOME"] C:\xampp\mysql\bin _SERVER["OPENSSL_CONF"] C:/xampp/apache/bin/openssl.cnf _SERVER["PHP_PEAR_SYSCONF_DIR"] C:\xampp\php _SERVER["PHPRC"] C:\xampp\php _SERVER["TMP"] C:\xampp\tmp _SERVER["HTTP_HOST"] localhost _SERVER["HTTP_CONNECTION"] keep-alive _SERVER["HTTP_USER_AGENT"] Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 _SERVER["HTTP_CACHE_CONTROL"] max-age=0 _SERVER["HTTP_ACCEPT"] application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 _SERVER["HTTP_ACCEPT_ENCODING"] gzip,deflate,sdch _SERVER["HTTP_ACCEPT_LANGUAGE"] en-US,en;q=0.8 _SERVER["HTTP_ACCEPT_CHARSET"] ISO-8859-1,utf-8;q=0.7,*;q=0.3 _SERVER["PATH"] C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin _SERVER["SystemRoot"] C:\WINDOWS _SERVER["COMSPEC"] C:\WINDOWS\system32\cmd.exe _SERVER["PATHEXT"] .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH _SERVER["WINDIR"] C:\WINDOWS _SERVER["SERVER_SIGNATURE"] <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> _SERVER["SERVER_SOFTWARE"] Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 _SERVER["SERVER_NAME"] localhost _SERVER["SERVER_ADDR"] 127.0.0.1 _SERVER["SERVER_PORT"] 80 _SERVER["REMOTE_ADDR"] 127.0.0.1 _SERVER["DOCUMENT_ROOT"] C:/xampp/htdocs _SERVER["SERVER_ADMIN"] postmaster@localhost _SERVER["SCRIPT_FILENAME"] C:/xampp/htdocs/test.php _SERVER["REMOTE_PORT"] 3275 _SERVER["GATEWAY_INTERFACE"] CGI/1.1 _SERVER["SERVER_PROTOCOL"] HTTP/1.1 _SERVER["REQUEST_METHOD"] GET _SERVER["QUERY_STRING"] no value _SERVER["REQUEST_URI"] /test.php _SERVER["SCRIPT_NAME"] /test.php _SERVER["PHP_SELF"] /test.php _SERVER["REQUEST_TIME"] 1270600868 _SERVER["argv"] Array ( ) _SERVER["argc"] 0 PHP License This program is free software; you can redistribute it and/or modify it under the terms of the PHP License as published by the PHP Group and included in the distribution in the file: LICENSE This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. If you did not receive a copy of the PHP license, or have any questions about PHP licensing, please contact [email protected].

Read the article

My linux server takes more than an hour to boot. Suggestions?

- by jamieb

I am building a CentOS 5.4 system that boots off a compact flash card using a card reader that emulates an IDE drive. It literally takes about an hour to boot. The ultra-slow part occurs when Grub is loading the kernel. Once that's done, the rest of the boot process only takes about a minute to get to a login prompt. Does anyone have any suggestions? I suspect that it may have to do with UDMA. Everything IDE-related in my BIOS seems to checkout. The read performance hdparm is telling me 1.77 MB/s. Ouch! (But even at that rate, it still shouldn't take an hour to decompress and load the kernel) [root@server ~]# hdparm -tT /dev/hdc /dev/hdc: Timing cached reads: 2444 MB in 2.00 seconds = 1222.04 MB/sec Timing buffered disk reads: 6 MB in 3.39 seconds = 1.77 MB/sec Trying to enable DMA is a no-go though: [root@server ~]# hdparm -d1 /dev/hdc /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) Here's some command outputs that might help: System [root@server ~]# uname -a Linux server.localdomain 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux PCI info: [root@server ~]# lspci -v 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) Subsystem: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation 82945G/GZ Integrated Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] I/O ports at ff00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fdf80000 (32-bit, non-prefetchable) [size=256K] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 2 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at fe00 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at fd00 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at fc00 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at fb00 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fdd00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at f800 [size=16] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) SMBus Controller Flags: medium devsel, IRQ 17 I/O ports at 0500 [size=32] 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at de00 [size=256] Memory at fdeff000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at dc00 [size=256] Memory at fdefe000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at da00 [size=256] Memory at fdefd000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 hdparm ouput: [root@server ~]# hdparm /dev/hdc /dev/hdc: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 8146/16/63, sectors = 8211168, start = 0 [root@server ~]# hdparm -I /dev/hdc /dev/hdc: ATA device, with non-removable media Model Number: InnoDisk Corp. - iCF4000 4GB Serial Number: 20091023AACA70000753 Firmware Revision: 081107 Standards: Supported: 5 Likely used: 6 Configuration: Logical max current cylinders 8146 8146 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 8211168 LBA user addressable sectors: 8211168 device size with M = 1024*1024: 4009 MBytes device size with M = 1000*1000: 4204 MBytes (4 GB) Capabilities: LBA, IORDY(can be disabled) Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 2 Current = 2 DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * Power Management feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * CFA feature set * Mandatory FLUSH_CACHE HW reset results: CBLID- above Vih Device num = 0 CFA power mode 1: enabled and required by some commands Maximum current = 100ma Checksum: correct

Read the article

Hg: How to do a rebase like git's rebase

- by jpswain09

Hey guys, In Git I can do this: 1. Start working on new feature: $ git co -b newfeature-123 # (a local feature development branch) do a few commits (M, N, O) master A---B---C \ newfeature-123 M---N---O 2. Pull new changes from upstream master: $ git pull (master updated with ff-commits) master A---B---C---D---E---F \ newfeature-123 M---N---O 3. Rebase off master so that my new feature can be developed against the latest upstream changes: (from newfeature-123) $ git rebase master master A---B---C---D---E---F \ newfeature-123 M---N---O I want to know how to do the same thing in Mercurial, and I've scoured the web for an answer, but the best I could find was this: http://www.selenic.com/pipermail/mercurial/2007-June/013393.html That link provides 2 examples: 1. I'll admit that this: (replacing the revisions from the example with those from my own example) hg up -C F hg branch -f newfeature-123 hg transplant -a -b newfeature-123 is not too bad, except that it leaves behind the pre-rebase M-N-O as an unmerged head and creates 3 new commits M',N',O' that represent them branching off the updated mainline. Basically the problem is that I end up with this: master A---B---C---D---E---F \ \ newfeature-123 \ M'---N'---O' \ newfeature-123 M---N---O this is not good because it leaves behind local, unwanted commits that should be dropped. The other option from the same link is hg qimport -r M:O hg qpop -a hg up F hg branch newfeature-123 hg qpush -a hg qdel -r qbase:qtip and this does result in the desired graph: master A---B---C---D---E---F \ newfeature-123 M---N---O but these commands (all 6 of them!) seem so much more complicated than $ git rebase master I want to know if this is the only equivalent in Hg or if there is some other way available that is simple like Git. Thanks!! Jamie

Read the article

Why does this PHP script interfere with my CSS layout?

- by CT

This page uses $_GET to grab an asset id and query a mysql database and return some information. If 'id' does not match anything, no results are displayed but the page looks fine. If 'id' is null an error would occur at $id = $_GET["id"] or die(mysql_error()); When this occurs, they page layout is not displayed correctly. How do I fix this? Bonus question: How would I get a message like "No matching results found" or something when the id does not match any id in the database or is null. Thank you. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link rel="stylesheet" type="text/css" href="style.css" /> <title>Wagman IT Asset</title> </head> <body> <div id="page"> <div id="header"> <img src="images/logo.png" /> </div> </div> <div id="content"> <div id="container"> <div id="main"> <div id="menu"> <ul> <table width="100%" border="0"> <tr> <td><li><a href="index.php">Search Assets</a></li></td> <td><li><a href="browse.php">Browse Assets</a></li></td> <td><li><a href="add_asset.php">Add Asset</a></li></td> <td>        </td> </tr> </table> </ul> </div> <div id="text"> <ul> <li> <h1>View Asset</h1> </li> </ul> <table width="100%" border="0" cellpadding="2"> <?php //make database connect mysql_connect("localhost", "asset_db", "asset_db") or die(mysql_error()); mysql_select_db("asset_db") or die(mysql_error()); //get asset $id = $_GET["id"] or die(mysql_error()); //get type of asset $sql = "SELECT asset.type From asset WHERE asset.id = $id"; $result = mysql_query($sql) or die(mysql_error()); $row = mysql_fetch_assoc($result); $type = $row['type']; switch ($type){ case "Server": $sql = " SELECT asset.id ,asset.company ,asset.location ,asset.purchase_date ,asset.purchase_order ,asset.value ,asset.type ,asset.notes ,server.manufacturer ,server.model ,server.serial_number ,server.esc ,server.user ,server.prev_user ,server.warranty FROM asset LEFT JOIN server ON server.id = asset.id WHERE asset.id = $id "; $result = mysql_query($sql); while($row = mysql_fetch_assoc($result)) { echo "<tr><td>      </td><td>Asset ID:</td><td>"; $id = $row['id']; setcookie('id', $id); echo "$id</td></tr>"; echo "<tr<td>      </td><td>Company:</td><td>"; $company = $row['company']; setcookie('company', $company); echo "$company</td></tr>"; echo "<tr><td>      </td><td>Location:</td><td>"; $location = $row['location']; setcookie('location', $location); echo "$location</td></tr>"; echo "<tr><td>      </td><td>Purchase Date:</td><td>"; $purchase_date = $row['purchase_date']; setcookie('purchase_date', $purchase_date); echo "$purchase_date</td></tr>"; echo "<tr><td>      </td><td>Purchase Order:</td><td>"; $purchase_order = $row['purchase_order']; setcookie('purchase_order', $purchase_order); echo "$purchase_order</td></tr>"; echo "<tr><td>      </td><td>Value:</td><td>"; $value = $row['value']; setcookie('value', $value); echo "$value</td></tr>"; echo "<tr><td>      </td><td>Type:</td><td>"; $type = $row['type']; setcookie('type', $type); echo "$type</td></tr>"; echo "<tr><td>      </td><td>Notes:</td><td>"; $notes = $row['notes']; setcookie('notes', $notes); echo "$notes</td></tr>"; echo "<tr><td>      </td><td>Manufacturer:</td><td>"; $manufacturer = $row['manufacturer']; setcookie('manufacturer', $manufacturer); echo "$manufacturer</td></tr>"; echo "<tr><td>      </td><td>Model / Description:</td><td>"; $model = $row['model']; setcookie('model', $model); echo "$model</td></tr>"; echo "<tr><td>      </td><td>Serial Number / Service Tag:</td><td>"; $serial_number = $row['serial_number']; setcookie('serial_number', $serial_number); echo "$serial_number</td></tr>"; echo "<tr><td>      </td><td>Express Service Code:</td><td>"; $esc = $row['esc']; setcookie('esc', $esc); echo "$esc</td></tr>"; echo "<tr><td>      </td><td>User:</td><td>"; $user = $row['user']; setcookie('user', $user); echo "$user</td></tr>"; echo "<tr><td>      </td><td>Previous User:</td><td>"; $prev_user = $row['prev_user']; setcookie('prev_user', $prev_user); echo "$prev_user</td></tr>"; echo "<tr><td>      </td><td>Warranty:</td><td>"; $warranty = $row['warranty']; setcookie('warranty', $warranty); echo "$warranty</td></tr>"; } break; case "Laptop": $sql = " SELECT asset.id ,asset.company ,asset.location ,asset.purchase_date ,asset.purchase_order ,asset.value ,asset.type ,asset.notes ,laptop.manufacturer ,laptop.model ,laptop.serial_number ,laptop.esc ,laptop.user ,laptop.prev_user ,laptop.warranty FROM asset LEFT JOIN laptop ON laptop.id = asset.id WHERE asset.id = $id "; $result = mysql_query($sql); while($row = mysql_fetch_assoc($result)) { echo "<tr><td>      </td><td>Asset ID:</td><td>"; $id = $row['id']; setcookie('id', $id); echo "$id</td></tr>"; echo "<tr<td>      </td><td>Company:</td><td>"; $company = $row['company']; setcookie('company', $company); echo "$company</td></tr>"; echo "<tr><td>      </td><td>Location:</td><td>"; $location = $row['location']; setcookie('location', $location); echo "$location</td></tr>"; echo "<tr><td>      </td><td>Purchase Date:</td><td>"; $purchase_date = $row['purchase_date']; setcookie('purchase_date', $purchase_date); echo "$purchase_date</td></tr>"; echo "<tr><td>      </td><td>Purchase Order:</td><td>"; $purchase_order = $row['purchase_order']; setcookie('purchase_order', $purchase_order); echo "$purchase_order</td></tr>"; echo "<tr><td>      </td><td>Value:</td><td>"; $value = $row['value']; setcookie('value', $value); echo "$value</td></tr>"; echo "<tr><td>      </td><td>Type:</td><td>"; $type = $row['type']; setcookie('type', $type); echo "$type</td></tr>"; echo "<tr><td>      </td><td>Notes:</td><td>"; $notes = $row['notes']; setcookie('notes', $notes); echo "$notes</td></tr>"; echo "<tr><td>      </td><td>Manufacturer:</td><td>"; $manufacturer = $row['manufacturer']; setcookie('manufacturer', $manufacturer); echo "$manufacturer</td></tr>"; echo "<tr><td>      </td><td>Model / Description:</td><td>"; $model = $row['model']; setcookie('model', $model); echo "$model</td></tr>"; echo "<tr><td>      </td><td>Serial Number / Service Tag:</td><td>"; $serial_number = $row['serial_number']; setcookie('serial_number', $serial_number); echo "$serial_number</td></tr>"; echo "<tr><td>      </td><td>Express Service Code:</td><td>"; $esc = $row['esc']; setcookie('esc', $esc); echo "$esc</td></tr>"; echo "<tr><td>      </td><td>User:</td><td>"; $user = $row['user']; setcookie('user', $user); echo "$user</td></tr>"; echo "<tr><td>      </td><td>Previous User:</td><td>"; $prev_user = $row['prev_user']; setcookie('prev_user', $prev_user); echo "$prev_user</td></tr>"; echo "<tr><td>      </td><td>Warranty:</td><td>"; $warranty = $row['warranty']; setcookie('warranty', $warranty); echo "$warranty</td></tr>"; } break; case "Desktop": $sql = " SELECT asset.id ,asset.company ,asset.location ,asset.purchase_date ,asset.purchase_order ,asset.value ,asset.type ,asset.notes ,desktop.manufacturer ,desktop.model ,desktop.serial_number ,desktop.esc ,desktop.user ,desktop.prev_user ,desktop.warranty FROM asset LEFT JOIN desktop ON desktop.id = asset.id WHERE asset.id = $id "; $result = mysql_query($sql); while($row = mysql_fetch_assoc($result)) { echo "<tr><td>      </td><td>Asset ID:</td><td>"; $id = $row['id']; setcookie('id', $id); echo "$id</td></tr>"; echo "<tr<td>      </td><td>Company:</td><td>"; $company = $row['company']; setcookie('company', $company); echo "$company</td></tr>"; echo "<tr><td>      </td><td>Location:</td><td>"; $location = $row['location']; setcookie('location', $location); echo "$location</td></tr>"; echo "<tr><td>      </td><td>Purchase Date:</td><td>"; $purchase_date = $row['purchase_date']; setcookie('purchase_date', $purchase_date); echo "$purchase_date</td></tr>"; echo "<tr><td>      </td><td>Purchase Order:</td><td>"; $purchase_order = $row['purchase_order']; setcookie('purchase_order', $purchase_order); echo "$purchase_order</td></tr>"; echo "<tr><td>      </td><td>Value:</td><td>"; $value = $row['value']; setcookie('value', $value); echo "$value</td></tr>"; echo "<tr><td>      </td><td>Type:</td><td>"; $type = $row['type']; setcookie('type', $type); echo "$type</td></tr>"; echo "<tr><td>      </td><td>Notes:</td><td>"; $notes = $row['notes']; setcookie('notes', $notes); echo "$notes</td></tr>"; echo "<tr><td>      </td><td>Manufacturer:</td><td>"; $manufacturer = $row['manufacturer']; setcookie('manufacturer', $manufacturer); echo "$manufacturer</td></tr>"; echo "<tr><td>      </td><td>Model / Description:</td><td>"; $model = $row['model']; setcookie('model', $model); echo "$model</td></tr>"; echo "<tr><td>      </td><td>Serial Number / Service Tag:</td><td>"; $serial_number = $row['serial_number']; setcookie('serial_number', $serial_number); echo "$serial_number</td></tr>"; echo "<tr><td>      </td><td>Express Service Code:</td><td>"; $esc = $row['esc']; setcookie('esc', $esc); echo "$esc</td></tr>"; echo "<tr><td>      </td><td>User:</td><td>"; $user = $row['user']; setcookie('user', $user); echo "$user</td></tr>"; echo "<tr><td>      </td><td>Previous User:</td><td>"; $prev_user = $row['prev_user']; setcookie('prev_user', $prev_user); echo "$prev_user</td></tr>"; echo "<tr><td>      </td><td>Warranty:</td><td>"; $warranty = $row['warranty']; setcookie('warranty', $warranty); echo "$warranty</td></tr>"; } break; } ?> </table> <br /> <br /> <table width="100%" border="0"> <tr> <td> </td> <td> </td> <td> </td> <td><a href="#">Add Software</a></td> <td><a href="#">Edit Asset</a></td> <td><a href="#">Delete Asset</a></td> </tr> </table> </div> </div> </div> <div class="clear"></div> <div id="footer" align="center"> <p> </p> </div> </div> <div id="tagline"> Wagman Construction - Bridging Generations since 1902 </div> </body> </html>

Read the article

Hotkey to toggle checkboxes does opposite

- by Joel Harris

In this jsFiddle, I have a table with checkboxes in the first column. The master checkbox in the table header functions as expected toggling the state of all the checkboxes in the table when it is clicked. I have set up a hotkey for "shift-x" to toggle the master checkbox. The desired behavior when using the hotkey is: The master checkbox is toggled The child checkboxes each have their checked state set to match the master But what is actually happening is the opposite... The child checkboxes each have their checked state set to match the master The master checkbox is toggled Here is the relevant code $(".master-select").click(function(){ $(this).closest("table").find("tbody .row-select").prop('checked', this.checked); }); function tickAllCheckboxes() { var master = $(".master-select").click(); } //using jquery.hotkeys.js to assign hotkey $(document).bind('keydown', 'shift+x', tickAllCheckboxes); This results in the child checkboxes having the opposite checked state of the master checkbox. Why is that happening? A fix would be nice, but I'm really after an explanation so I can understand what is happening.

Read the article

Why is this unwanted ">" character being displayed when displaying this PHP document in a browser?

- by CT

This page takes an asset id from $_GET of the url and displays some info about the asset after querying a mysql database. When I view the page in my browser there is an unwanted "" character within the page and I have no idea why. I've commented where it appears. It appears before the < table create tag right afterward. The < table tag was originally outside the php script section but I threw it in to see if it made a difference. It did not. Thank you all. I am viewing the page in Firefox. The web server is running on an Ubuntu Server 10.04 virtual machine on my laptop. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link rel="stylesheet" type="text/css" href="style.css" /> <title>Wagman IT Asset</title> </head> <body> <div id="page"> <div id="header"> <img src="images/logo.png" /> </div> </div> <div id="content"> <div id="container"> <div id="main"> <div id="menu"> <ul> <table width="100%" border="0"> <tr> <td><li><a href="index.php">Search Assets</a></li></td> <td><li><a href="browse.php">Browse Assets</a></li></td> <td><li><a href="add_asset.php">Add Asset</a></li></td> <td>        </td> </tr> </table> </ul> </div> <div id="text"> <ul> <li> <h1>View Asset</h1> </li> </ul> //UNWANTED > CHARACTER APPEARS HERE <?php echo "<table width='100%' border='0' cellpadding='2'>"; //make database connect mysql_connect("localhost", "asset_db", "asset_db") or die(mysql_error()); mysql_select_db("asset_db") or die(mysql_error()); //get asset $id = $_GET["id"]; //get type of asset $sql = "SELECT asset.type From asset WHERE asset.id = $id"; $result = mysql_query($sql) or die(mysql_error()); $row = mysql_fetch_assoc($result); $type = $row['type']; switch ($type){ case "Server": $sql = " SELECT asset.id ,asset.company ,asset.location ,asset.purchase_date ,asset.purchase_order ,asset.value ,asset.type ,asset.notes ,server.manufacturer ,server.model ,server.serial_number ,server.esc ,server.user ,server.prev_user ,server.warranty FROM asset LEFT JOIN server ON server.id = asset.id WHERE asset.id = $id "; $result = mysql_query($sql); while($row = mysql_fetch_assoc($result)) { echo "<tr><td>      </td><td>Asset ID:</td><td>"; $id = $row['id']; setcookie('id', $id); echo "$id</td></tr>"; echo "<tr<td>      </td>><td>Company:</td><td>"; $company = $row['company']; setcookie('company', $company); echo "$company</td></tr>"; echo "<tr><td>      </td><td>Location:</td><td>"; $company = $row['location']; setcookie('location', $location); echo "$location</td></tr>"; echo "<tr><td>      </td><td>Purchase Date:</td><td>"; $purchase_date = $row['purchase_date']; setcookie('purchase_date', $purchase_date); echo "$purchase_date</td></tr>"; echo "<tr><td>      </td><td>Purchase Order:</td><td>"; $purchase_order = $row['purchase_order']; setcookie('purchase_order', $purchase_order); echo "$purchase_order</td></tr>"; echo "<tr><td>      </td><td>Value:</td><td>"; $value = $row['value']; setcookie('value', $value); echo "$value</td></tr>"; echo "<tr><td>      </td><td>Type:</td><td>"; $type = $row['type']; setcookie('type', $type); echo "$type</td></tr>"; echo "<tr><td>      </td><td>Notes:</td><td>"; $notes = $row['notes']; setcookie('notes', $notes); echo "$notes</td></tr>"; echo "<tr><td>      </td><td>Manufacturer:</td><td>"; $manufacturer = $row['manufacturer']; setcookie('manufacturer', $manufacturer); echo "$manufacturer</td></tr>"; echo "<tr><td>      </td><td>Model / Description:</td><td>"; $model = $row['model']; setcookie('model', $model); echo "$model</td></tr>"; echo "<tr><td>      </td><td>Serial Number / Service Tag:</td><td>"; $serial_number = $row['serial_number']; setcookie('serial_number', $serial_number); echo "$serial_number</td></tr>"; echo "<tr><td>      </td><td>Express Service Code:</td><td>"; $escy = $row['esc']; setcookie('esc', $esc); echo "$esc</td></tr>"; echo "<tr><td>      </td><td>User:</td><td>"; $user = $row['user']; setcookie('user', $user); echo "$user</td></tr>"; echo "<tr><td>      </td><td>Previous User:</td><td>"; $prev_user = $row['prev_user']; setcookie('prev_user', $prev_user); echo "$prev_user</td></tr>"; echo "<tr><td>      </td><td>Warranty:</td><td>"; $warranty = $row['warranty']; setcookie('warranty', $warranty); echo "$warranty</td></tr></table>"; } break; case "Laptop": $sql = " SELECT asset.id ,asset.company ,asset.location ,asset.purchase_date ,asset.purchase_order ,asset.value ,asset.type ,asset.notes ,laptop.manufacturer ,laptop.model ,laptop.serial_number ,laptop.esc ,laptop.user ,laptop.prev_user ,laptop.warranty FROM asset LEFT JOIN laptop ON laptop.id = asset.id WHERE asset.id = $id "; $result = mysql_query($sql); while($row = mysql_fetch_assoc($result)) { echo "<tr><td>      </td><td>Asset ID:</td><td>"; $id = $row['id']; setcookie('id', $id); echo "$id</td></tr>"; echo "<tr<td>      </td>><td>Company:</td><td>"; $company = $row['company']; setcookie('company', $company); echo "$company</td></tr>"; echo "<tr><td>      </td><td>Location:</td><td>"; $company = $row['location']; setcookie('location', $location); echo "$location</td></tr>"; echo "<tr><td>      </td><td>Purchase Date:</td><td>"; $purchase_date = $row['purchase_date']; setcookie('purchase_date', $purchase_date); echo "$purchase_date</td></tr>"; echo "<tr><td>      </td><td>Purchase Order:</td><td>"; $purchase_order = $row['purchase_order']; setcookie('purchase_order', $purchase_order); echo "$purchase_order</td></tr>"; echo "<tr><td>      </td><td>Value:</td><td>"; $value = $row['value']; setcookie('value', $value); echo "$value</td></tr>"; echo "<tr><td>      </td><td>Type:</td><td>"; $type = $row['type']; setcookie('type', $type); echo "$type</td></tr>"; echo "<tr><td>      </td><td>Notes:</td><td>"; $notes = $row['notes']; setcookie('notes', $notes); echo "$notes</td></tr>"; echo "<tr><td>      </td><td>Manufacturer:</td><td>"; $manufacturer = $row['manufacturer']; setcookie('manufacturer', $manufacturer); echo "$manufacturer</td></tr>"; echo "<tr><td>      </td><td>Model / Description:</td><td>"; $model = $row['model']; setcookie('model', $model); echo "$model</td></tr>"; echo "<tr><td>      </td><td>Serial Number / Service Tag:</td><td>"; $serial_number = $row['serial_number']; setcookie('serial_number', $serial_number); echo "$serial_number</td></tr>"; echo "<tr><td>      </td><td>Express Service Code:</td><td>"; $escy = $row['esc']; setcookie('esc', $esc); echo "$esc</td></tr>"; echo "<tr><td>      </td><td>User:</td><td>"; $user = $row['user']; setcookie('user', $user); echo "$user</td></tr>"; echo "<tr><td>      </td><td>Previous User:</td><td>"; $prev_user = $row['prev_user']; setcookie('prev_user', $prev_user); echo "$prev_user</td></tr>"; echo "<tr><td>      </td><td>Warranty:</td><td>"; $warranty = $row['warranty']; setcookie('warranty', $warranty); echo "$warranty</td></tr></table>"; } break; case "Desktop": $sql = " SELECT asset.id ,asset.company ,asset.location ,asset.purchase_date ,asset.purchase_order ,asset.value ,asset.type ,asset.notes ,desktop.manufacturer ,desktop.model ,desktop.serial_number ,desktop.esc ,desktop.user ,desktop.prev_user ,desktop.warranty FROM asset LEFT JOIN desktop ON desktop.id = asset.id WHERE asset.id = $id "; $result = mysql_query($sql); while($row = mysql_fetch_assoc($result)) { echo "<tr><td>      </td><td>Asset ID:</td><td>"; $id = $row['id']; setcookie('id', $id); echo "$id</td></tr>"; echo "<tr<td>      </td>><td>Company:</td><td>"; $company = $row['company']; setcookie('company', $company); echo "$company</td></tr>"; echo "<tr><td>      </td><td>Location:</td><td>"; $company = $row['location']; setcookie('location', $location); echo "$location</td></tr>"; echo "<tr><td>      </td><td>Purchase Date:</td><td>"; $purchase_date = $row['purchase_date']; setcookie('purchase_date', $purchase_date); echo "$purchase_date</td></tr>"; echo "<tr><td>      </td><td>Purchase Order:</td><td>"; $purchase_order = $row['purchase_order']; setcookie('purchase_order', $purchase_order); echo "$purchase_order</td></tr>"; echo "<tr><td>      </td><td>Value:</td><td>"; $value = $row['value']; setcookie('value', $value); echo "$value</td></tr>"; echo "<tr><td>      </td><td>Type:</td><td>"; $type = $row['type']; setcookie('type', $type); echo "$type</td></tr>"; echo "<tr><td>      </td><td>Notes:</td><td>"; $notes = $row['notes']; setcookie('notes', $notes); echo "$notes</td></tr>"; echo "<tr><td>      </td><td>Manufacturer:</td><td>"; $manufacturer = $row['manufacturer']; setcookie('manufacturer', $manufacturer); echo "$manufacturer</td></tr>"; echo "<tr><td>      </td><td>Model / Description:</td><td>"; $model = $row['model']; setcookie('model', $model); echo "$model</td></tr>"; echo "<tr><td>      </td><td>Serial Number / Service Tag:</td><td>"; $serial_number = $row['serial_number']; setcookie('serial_number', $serial_number); echo "$serial_number</td></tr>"; echo "<tr><td>      </td><td>Express Service Code:</td><td>"; $escy = $row['esc']; setcookie('esc', $esc); echo "$esc</td></tr>"; echo "<tr><td>      </td><td>User:</td><td>"; $user = $row['user']; setcookie('user', $user); echo "$user</td></tr>"; echo "<tr><td>      </td><td>Previous User:</td><td>"; $prev_user = $row['prev_user']; setcookie('prev_user', $prev_user); echo "$prev_user</td></tr>"; echo "<tr><td>      </td><td>Warranty:</td><td>"; $warranty = $row['warranty']; setcookie('warranty', $warranty); echo "$warranty</td></tr></table>"; } break; } ?> </div> </div> </div> <div class="clear"></div> <div id="footer" align="center"> <p> </p> </div> </div> <div id="tagline"> Wagman Construction - Bridging Generations since 1902 </div> </body> </html>

Read the article

Ejabberd Clustering on EC2

- by Architact

I am trying to implement ejabberd clustering on Amazon EC2 instances, I have installed ejabberd and it is working fine on both instances, I can connect and send message, my first server is a master server and has the FQDN of master.example.com, second server is a slave and has FQDN of slave.example.com. I have edited the ejabberdctl.cfg file on both instances changed INET_DIST_INTERFACE on both instances to the value returned by ifconfig changed ERLANG_NODE to [email protected] on master and [email protected] on slave. Now when I run this command on slave net_adm:ping('[email protected]'). it always returns pang response indicating that it can't reach the master server. I am looking for possible fixes for that. Things already done Both master and slave domains are pointing to their instances I even tried allocating elastic ip and assigning that to instances, but did not help either. Any help will be greatly appreciated.

Read the article

How do you Remove an Invalid Remote Branch Reference from Git?

- by Casey

In my current repo I have the following output: $ git branch -a * master remotes/origin/master remotes/public/master I want to delete 'remotes/public/master' from the branch list: $ git branch -d remotes/public/master error: branch 'remotes/public/master' not found. Also, the output of 'git remote' is strange, since it does not list 'public': $ git remote show origin How can I delete 'remotes/public/master' from the branch list? Update, tried the 'git push' command: $ git push public :master fatal: 'public' does not appear to be a git repository fatal: The remote end hung up unexpectedly Solution: The accepted answer had the solution at the bottom! git gc --prune=now

Read the article

Convenient way to do "wrong way rebase" in git?

- by Kaz

I want to pull in newer commits from master into topic, but not in such a way that topic changes are replayed over top of master, but rather vice versa. I want the new changes from master to be played on top of topic, and the result to be installed as the new topic head. I can get exactly the right object if I rebase master to topic, the only problem being that the object is installed as the new head of master rather than topic. Is there some nice way to do this without manually shuffling around temporary head pointers? Edit: Here is how it can be achieved using a temporary branch head, but it's clumsy: git checkout master git checkout -b temp # temp points to master git rebase topic # topic is brought into temp, temp changes played on top Now we have the object we want, and it's pointed at by temp. git checkout topic git reset --hard temp Now topic has it; and all that is left is to tidy up by deleting temp: git branch -d temp Another way is to to do away with temp and just rebase master, and then reset topic to master. Finally, reset master back to what it was by pulling its old head from the reflog, or a cut-and-paste buffer.

Read the article

ODI 11g – Scripting Repository Creation

- by David Allan

Here’s a quick post on how to create both master and work repositories in one simple dialog, its using the groovy capabilities in ODI 11g and the groovy swing builder components. So if you want more/less take the groovy script and change, its easy stuff. The groovy script odi_create_repos.groovy is here, just open it in ODI before connecting and you will be able to create both master and work repositories with ease – or check the groovy out and script your own automation – you can construct the master, work and runtime repositories, so if you are embedding ODI as your DI engine this may be very useful. When you click ‘Create Repository’ you will see the following in the log as the master repository starts to be created; ====================================================== Repository Creation Started.... ====================================================== Master Repository Creation Started.... Then the completion message followed by the work repository creation and final completion message. Master Repository Creation Completed. Work Repository Creation Started. Work Repository Creation Completed. ====================================================== Repository Creation Completed Successfully ====================================================== Script exited. If any error is hit, the script just exits and prints any error to the log. For example if I enter no passwords, I will get this error; ====================================================== Repository Creation Started.... ====================================================== Master Repository Creation Started.... ====================================================== Repository Creation Complete in Error ====================================================== oracle.odi.setup.RepositorySetupException: oracle.odi.core.security.PasswordPolicyNotMatchedException: ODI-10189: Password policy MinPasswordLength is not matched. ====================================================== Script exited. This is another example of using the ODI 11g SDK showing how to automate the construction of your data integration environment. The main interfaces and classes used here are IMasterRepositorySetup / MasterRepositorySetupImpl and IWorkRepositorySetup / WorkRepositorySetupImpl.

Read the article

ODI 11g – Scripting Repository Creation

- by David Allan

Here’s a quick post on how to create both master and work repositories in one simple dialog, its using the groovy capabilities in ODI 11g and the groovy swing builder components. So if you want more/less take the groovy script and change, its easy stuff. The groovy script odi_create_repos.groovy is here, just open it in ODI before connecting and you will be able to create both master and work repositories with ease – or check the groovy out and script your own automation – you can construct the master, work and runtime repositories, so if you are embedding ODI as your DI engine this may be very useful. When you click ‘Create Repository’ you will see the following in the log as the master repository starts to be created; ====================================================== Repository Creation Started.... ====================================================== Master Repository Creation Started.... Then the completion message followed by the work repository creation and final completion message. Master Repository Creation Completed. Work Repository Creation Started. Work Repository Creation Completed. ====================================================== Repository Creation Completed Successfully ====================================================== Script exited. If any error is hit, the script just exits and prints any error to the log. For example if I enter no passwords, I will get this error; ====================================================== Repository Creation Started.... ====================================================== Master Repository Creation Started.... ====================================================== Repository Creation Complete in Error ====================================================== oracle.odi.setup.RepositorySetupException: oracle.odi.core.security.PasswordPolicyNotMatchedException: ODI-10189: Password policy MinPasswordLength is not matched. ====================================================== Script exited. This is another example of using the ODI 11g SDK showing how to automate the construction of your data integration environment. The main interfaces and classes used here are IMasterRepositorySetup / MasterRepositorySetupImpl and IWorkRepositorySetup / WorkRepositorySetupImpl.

Read the article

Building Publishing Pages in Code

- by David Jacobus

Originally posted on: http://geekswithblogs.net/djacobus/archive/2013/10/27/154478.aspxOne of the Mantras we developers try to follow: Ensure that the solution package we deliver to the client is complete. We build Web Parts, Master Pages, Images, CSS files and other artifacts that we push to the client with a WSP (Solution Package) And then we have them finish the solution by building their site pages by adding the web parts to the site pages. I am a proponent that we, the developers, should minimize this time consuming work and build these site pages in code. I found a few blogs and some MSDN documentation but not really a complete solution that has all these artifacts working in one solution. What I am will discuss and provide a solution for is a package that has: 1. Master Page 2. Page Layout 3. Page Web Parts 4. Site Pages Most all done in code without the development team or the developers having to finish up the site building process spending a few hours or days completing the site! I am not implying that in Development we do this. In fact, we build these pages incrementally testing our web parts, etc. I am saying that the final action in our solution is that we take all these artifacts and add them to the site pages in code, the client then only needs to activate a few features and VIOLA their site appears!. I had a project that had me build 8 pages like this as part of the solution. In this blog post, I am taking a master page solution that I have called DJGreenMaster. On My Office 365 Development Site it looks like this: It is a generic master page for a SharePoint 2010 site Along with a three column layout. Centered with a footer that uses a SharePoint List and Web Part for the footer links. I use this master page a lot in my site development! Easy to change the color and site logo with a little CSS. I am going to add a few web parts for discussion purposes and then add these web parts to a site page in code. Lets look at the solution package for DJ Green Master as that will be the basis project for building the site pages: What you are seeing is a complete solution to add a Master Page to a site collection which contains: 1. Master Page Module which contains the Master Page and Page Layout 2. The Footer Module to add the Footer Web Part 3. Miscellaneous modules to add images, JQuery, CSS and subsite page 4. 3 features and two feature event receivers: a. DJGreenCSS, used to add the master page CSS file to Style Sheet Library and an Event Receiver to check it in. b. DJGreenMaster used to add the Master Page and Page Layout. In an Event Receiver change the master page to DJGreenMaster , create the footer list and check the files in. c. DJGreenMasterWebParts add the Footer Web Part to the site collection. I won’t go over the code for this as I will give it to you at the end of this blog post. I have discussed creating a list in code in a previous post. So what we have is the basis to begin what is germane to this discussion. I have the first two requirements completed. I need now to add page web parts and the build the pages in code. For the page web parts, I will use one downloaded from Codeplex which does not use a SharePoint custom list for simplicity: Weather Web Part and another downloaded from MSDN which is a SharePoint Custom Calendar Web Part, I had to add some functionality to make the events color coded to exceed the built-in 10 overlays using JQuery! Here is the solution with the added projects: Here is a screen shot of the Weather Web Part Deployed: Here is a screen shot of the Site Calendar with JQuery: Okay, Now we get to the final item: To create Publishing pages. We need to add a feature receiver to the DJGreenMaster project I will name it DJSitePages and also add a Event Receiver: We will build the page at the site collection level and all of the code necessary will be contained in the event receiver. Added a reference to the Microsoft.SharePoint.Publishing.dll contained in the ISAPI folder of the 14 Hive. First we will add some static methods from which we will call in our Event Receiver: 1: private static void checkOut(string pagename, PublishingPage p) 2: { 3: if (p.Name.Equals(pagename, StringComparison.InvariantCultureIgnoreCase)) 4: { 5: 6: if (p.ListItem.File.CheckOutType == SPFile.SPCheckOutType.None) 7: { 8: p.CheckOut(); 9: } 10: 11: if (p.ListItem.File.CheckOutType == SPFile.SPCheckOutType.Online) 12: { 13: p.CheckIn("initial"); 14: p.CheckOut(); 15: } 16: } 17: } 18: private static void checkin(PublishingPage p,PublishingWeb pw) 19: { 20: SPFile publishFile = p.ListItem.File; 21: 22: if (publishFile.CheckOutType != SPFile.SPCheckOutType.None) 23: { 24: 25: publishFile.CheckIn( 26: 27: "CheckedIn"); 28: 29: publishFile.Publish( 30: 31: "published"); 32: } 33: // In case of content approval, approve the file need to add 34: //pulishing site 35: if (pw.PagesList.EnableModeration) 36: { 37: publishFile.Approve("Initial"); 38: } 39: publishFile.Update(); 40: } In a Publishing Site, CheckIn and CheckOut are required when dealing with pages in a publishing site. Okay lets look at the Feature Activated Event Receiver: 1: public override void FeatureActivated(SPFeatureReceiverProperties properties) 2: { 3: 4: 5: 6: object oParent = properties.Feature.Parent; 7: 8: 9: 10: if (properties.Feature.Parent is SPWeb) 11: { 12: 13: currentWeb = (SPWeb)oParent; 14: 15: currentSite = currentWeb.Site; 16: 17: } 18: 19: else 20: { 21: 22: currentSite = (SPSite)oParent; 23: 24: currentWeb = currentSite.RootWeb; 25: 26: } 27: 28: 29: //create the publishing pages 30: CreatePublishingPage(currentWeb, "Home.aspx", "ThreeColumnLayout.aspx","Home"); 31: //CreatePublishingPage(currentWeb, "Dummy.aspx", "ThreeColumnLayout.aspx","Dummy"); 32: } Basically we are calling the method Create Publishing Page with parameters: Current Web, Name of the Page, The Page Layout, Title of the page. Let’s look at the Create Publishing Page method: 1: 2: private void CreatePublishingPage(SPWeb site, string pageName, string pageLayoutName, string title) 3: { 4: PublishingSite pubSiteCollection = new PublishingSite(site.Site); 5: PublishingWeb pubSite = null; 6: if (pubSiteCollection != null) 7: { 8: // Assign an object to the pubSite variable 9: if (PublishingWeb.IsPublishingWeb(site)) 10: { 11: pubSite = PublishingWeb.GetPublishingWeb(site); 12: } 13: } 14: // Search for the page layout for creating the new page 15: PageLayout currentPageLayout = FindPageLayout(pubSiteCollection, pageLayoutName); 16: // Check or the Page Layout could be found in the collection 17: // if not (== null, return because the page has to be based on 18: // an excisting Page Layout 19: if (currentPageLayout == null) 20: { 21: return; 22: } 23: 24: 25: PublishingPageCollection pages = pubSite.GetPublishingPages(); 26: foreach (PublishingPage p in pages) 27: { 28: //The page allready exists 29: if ((p.Name == pageName)) return; 30: 31: } 32: 33: 34: 35: PublishingPage newPage = pages.Add(pageName, currentPageLayout); 36: newPage.Description = pageName.Replace(".aspx", ""); 37: // Here you can set some properties like: 38: newPage.IncludeInCurrentNavigation = true; 39: newPage.IncludeInGlobalNavigation = true; 40: newPage.Title = title; 41: 42: 43: 44: 45: 46: 47: //build the page 48: 49: 50: switch (pageName) 51: { 52: case "Homer.aspx": 53: checkOut("Courier.aspx", newPage); 54: BuildHomePage(site, newPage); 55: break; 56: 57: 58: default: 59: break; 60: } 61: // newPage.Update(); 62: //Now we can checkin the newly created page to the “pages” library 63: checkin(newPage, pubSite); 64: 65: 66: } The narrative in what is going on here is: 1. We need to find out if we are dealing with a Publishing Web. 2. Get the Page Layout 3. Create the Page in the pages list. 4. Based on the page name we build that page. (Here is where we can add all the methods to build multiple pages.) In the switch we call Build Home Page where all the work is done to add the web parts. Prior to adding the web parts we need to add references to the two web part projects in the solution. using WeatherWebPart.WeatherWebPart; using CSSharePointCustomCalendar.CustomCalendarWebPart; We can then reference them in the Build Home Page method. Let’s look at Build Home Page: 1: 2: private static void BuildHomePage(SPWeb web, PublishingPage pubPage) 3: { 4: // build the pages 5: // Get the web part manager for each page and do the same code as below (copy and paste, change to the web parts for the page) 6: // Part Description 7: SPLimitedWebPartManager mgr = web.GetLimitedWebPartManager(web.Url + "/Pages/Home.aspx", System.Web.UI.WebControls.WebParts.PersonalizationScope.Shared); 8: WeatherWebPart.WeatherWebPart.WeatherWebPart wwp = new WeatherWebPart.WeatherWebPart.WeatherWebPart() { ChromeType = PartChromeType.None, Title = "Todays Weather", AreaCode = "2504627" }; 9: //Dictionary<string, string> wwpDic= new Dictionary<string, string>(); 10: //wwpDic.Add("AreaCode", "2504627"); 11: //setWebPartProperties(wwp, "WeatherWebPart", wwpDic); 12: 13: // Add the web part to a pagelayout Web Part Zone 14: mgr.AddWebPart(wwp, "g_685594D193AA4BBFABEF2FB0C8A6C1DD", 1); 15: 16: CSSharePointCustomCalendar.CustomCalendarWebPart.CustomCalendarWebPart cwp = new CustomCalendarWebPart() { ChromeType = PartChromeType.None, Title = "Corporate Calendar", listName="CorporateCalendar" }; 17: 18: mgr.AddWebPart(cwp, "g_20CBAA1DF45949CDA5D351350462E4C6", 1); 19: 20: 21: pubPage.Update(); 22: 23: } Here is what we are doing: 1. We got a reference to the SharePoint Limited Web Part Manager and linked/referenced Home.aspx 2. Instantiated the a new Weather Web Part and used the Manager to add it to the page in a web part zone identified by ID, thus the need for a Page Layout where the developer knows the ID’s. 3. Instantiated the Calendar Web Part and used the Manager to add it to the page. 4. We the called the Publishing Page update method. 5. Lastly, the Create Publishing Page method checks in the page just created. Here is a screen shot of the page right after a deploy! Okay! I know we could make a home page look much better! However, I built this whole Integrated solution in less than a day with the caveat that the Green Master was already built! So what am I saying? Build you web parts, master pages, etc. At the very end of the engagement build the pages. The client will be very happy! Here is the code for this solution Code

Read the article

Why is BIND giving me a SERVFAIL in this case? (Notes inside)

- by imaginative

Woke up this morning to a bunch of the following: root@foo:/etc/bind# dig @1.2.3.4 foo.example.com ; <<>> DiG 9.6.1-P2 <<>> @1.2.3.4 foo.example.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 36121 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;;foo.example.com. IN A ;; Query time: 0 msec ;; SERVER: 1.2.3.4#53(1.2.3.4) ;; WHEN: Thu Apr 1 09:57:59 2010 ;; MSG SIZE rcvd: 31 Some background on the fictitious "1.2.3.4". It's a slave name server in my nameserver "farm". Technically I have ns1 (being the master) and ns2/ns3. Currently ns1/ns2 are down for maintenance, so I left ns3 at it serving live traffic. That's the point, DNS is supposed to be resilient. Now the odd part is, "1.2.3.4" was serving requests for example.com just fine for the last 4-5 days. This morning I get a phone call that it's non-responsive. After investigation I see the message you see above, SERVFAIL. I looked into the zone file and saw the following: example.com IN SOA ns1.example.com. hostmaster.mail.example.com. ( I wondered if at this point that the nameserver thought it was not authoritative over example.com and adjusted it to the following: example.com IN SOA ns3.example.com. hostmaster.mail.example.com. ( After that, it started responding again for all authoritative queries for example.com. I have no idea why. I thought these things were supposed to be normalized upon zone transfer from ns1 - ns3? Can someone please example why this happened and how to prevent it from happening in the future? I've never had a similar problem, and because I don't understand it well, I might be missing some critical information in this question. So please let me know if I can further add any detail to make things clearer as well. One more thing to note: I have other domains that I'm authoritative for that have their SOA still saying ns1.example.com. and not ns3.example.com. Those domains are serving requests just fine! Is it a matter of time before they stop also and I have to change SOA to ns3.example.com? Is this also only required because ns1 and ns2 are currently offline?

Search Results

Search found 7271 results on 291 pages for 'master notes'.

Page 41/291 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48 | Next Page >

- by Itai Ganot

- by doug

- by Mike Stiles

- by Kayle

- by Mala Narasimharajan

- by samgoody

- by Magicked

- by samgoody

- by RadiantHex

- by Rabarberski

- by Michael Neale

- by Zero Subnet

- by burnt1ce

- by jamieb

- by jpswain09

- by CT

- by Joel Harris

- by CT

- by Architact

- by Casey

- by Kaz

- by David Allan

- by David Allan

- by David Jacobus

- by imaginative

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48 | Next Page >