Search Results

Search found 2855 results on 115 pages for 'mike stone'.

Page 41/115 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • IPV6 causing issue with DNS

    - by Mike Wells
    I have set up an 'internal' DNS at my work, basically we have ourdomain.com that is for internet, email etc and I have created on one of our linux network servers (debian) a DNS using bind9 with the domain ourdomain.inc. So based on my files below and the symptoms I'm describing; what effect could IPV6 be having on my setup? What can I do to fix this? I assume it is not actually the IPV6 causing the issue, but rather something in my setup. These are the critical (I think) files I have modified: named.conf.local zone "ourdomain.inc" { type master; file "/etc/bind/zones/ourdomain.inc.db"; }; zone "201.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.201.168.192.in-addr.arpa"; }; named.conf.options options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. forwarders { 1.2.3.4; //IP of our external DNS provider }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; ourdomain.inc.db $TTL 86400 ourdomain.inc. IN SOA ns1.ipower.com. admin.ourdomain.inc. ( 2006081401 28800 3600 604800 38400 ) serv1 IN A 192.168.201.223 serv2 IN A 192.168.201.220 serv3 IN A 192.168.201.219 ns1.ipower.com. IN A 1.2.3.4 ns2.ipower.com. IN A 1.2.3.5 @ IN NS ns1.ipower.com. @ IN NS ns2.ipower.com. svn IN CNAME serv1 docs IN CNAME serv2 jira IN CNAME serv3 confluence IN CNAME serv3 fisheye IN CNAME serv3 rev.201.168.192.in-addr.arpa $TTL 86400 201.168.192.in-addr.arpa. IN SOA ns1.ipower.com. admin.ourdomain.inc. ( 2006081401; 28800; 604800; 604800; 86400 ) 223 IN PTR serv1 @ IN NS ns1.ipower.com. @ IN NS ns2.ipower.com. named.conf include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones"; I then made our internal DNS my preferred DNS with the two external DNSs the next in-line. More the most part this seems to work, I can ping svn.ourdomain.inc and it resolves to the correct IP, I can also ping google.com and it also resolves no problem. So all seem good. However, periodically (couple of times a day at least), I loose the ability to ping the svn.domain.inc (and all others defined under the internal DNS). What seem to fix the issue temporarily is to disable IPV6 on the network adapter of the client machine and then re-enable it. Then it works for a bit but will always fail again. System Info Internal DNS Distributor ID: Debian Description: Debian GNU/Linux 6.0.6 (squeeze) Release: 6.0.6 Codename: squeeze Linux 2.6.32-5-686 i686 BIND 9.7.3 PC OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7601 Service Pack 1 Build 7601 System Type: x64-based PC Network Card(s): 2 NIC(s) Installed. [01]: Realtek PCIe GBE Family Controller Connection Name: WORK LAN DHCP Enabled: No IP address(es) [01]: the.ipv4.address [02]: the:ipv6:address The question... So based on my files above and the symptoms I described; what effect could IPV6 be having on my setup? What can I do to fix this? I assume it is not actually the IPV6 causing the issue, but rather something in my setup.

    Read the article

  • Linux NFS create mask and force user equivalent

    - by Mike
    I have two Linux servers: fileserver Debian 5.0.3 (2.6.26-2-686) Samba version 3.4.2 apache Ubuntu 10.04 LTS (2.6.32-23-generic) Apache 2.2.14 I have a number of Samba shares on fileserver so that I can access files from Windows PCs. I am also exporting /data/www-data to the apache server, where I have it mounted as /var/www. The setup is okay, except for when I come to create files on the NFS mount. I end up with files that cannot be read by Apache, or which cannot be modified by other users on my system. With Samba, I can specify force user, force group, create mask and directory mask, and this ensures that all files are created with suitable permissions for my Apache web server. I can't find a way to do this with NFS. Is there a way to force permissions and ownership with NFS - am I missing something obvious? Although I've spent quite a bit of time with Linux, and am weaning myself off Windows, I still haven't quite got to grip with Linux permissions... If this is not the right way to do things, I am open to alternative suggestions.

    Read the article

  • PC does not recognize XBox 360 controller connected through Play & Charge Kit

    - by Mike Cole
    I wanted to hook up my wireless XBox 360 controller to my PC running windows 7. I'm trying to use the Play & Charge kit since I already had that laying around. I plugged it in and Windows recognize it and installed it. It registers in Device Manager as "Xbox 360 Wireless Controller via Play & Charge Kit". The controller also has the 1st quadrant lit. However, I can't seem to make this work with any games. I installed the "Microsoft Xbox 360 Accessories" kit from MS website, and I run the Accessories Status app and it doesn't recognize that the controller is connected. Does anybody know what I'm doing wrong out there?

    Read the article

  • Transferring DHCP using Windows Server Migration Tool - Why is Powershell is crashing on the import of the .mig file?

    - by Mike
    I am migrating DHCP from a windows server 2003R2 DC to a Windows Server 2008R2 DC I've followed this video and its predecessor (Installing Windows Server Migration Tools) http://technet.microsoft.com/en-us/video/migrating-dhcp-using-the-windows-server-2008-r2-migration-tools.aspx I went through everything smoothly until the last step. I have exported a .mig file with my DHCP configuration on the old 2003r2 server. I transferred this .mig file over to my 2008R2 server, when running the import command, it will appear to work for a minute or two and then I get a generic windows "Powershell has stopped working" error and I have to close the program. Under the problem details I see the following: FileVersionOfSystemManagementAutomation: 6.1.7600.16385 InnermostExceptionType: System.AccessViolationException OutermostExceptionType: System.AccessViolationException DeepestPowerShellFrame: unknown OS Version: 6.1.7600.2.0.0.272.7 LocaleID: 1033 Seems like there are permissions issues maybe? I am running powershell as an admin and am logged in to the server as a domain administrator. Any Ideas? Thanks

    Read the article

  • Proxy HTTPS requests to a HTTP backend with NGINX.

    - by Mike
    I have nginx configured to be my externally visible webserver which talks to a backend over HTTP. The scenario I want to achieve is: Client makes HTTPS request to nginx nginx proxies request over HTTP to the backend nginx receives response from backend over HTTP. nginx passes this back to the client over HTTPS My current config (where backend is configured correctly) is: server { listen 80; server_name localhost; location ~ .* { proxy_pass http://backend; proxy_redirect http://backend https://$host; proxy_set_header Host $host; } } My problem is the response to the client (step 4) is sent over HTTP not HTTPS. Any ideas?

    Read the article

  • Is the iPad in Europe totally unblocked?

    - by Mike
    One fast question: if I buy an iPad 3G in Europe will it work on other places without jailbreak? I ask this because I heard that, in Europe, iPads are not blocked to any telecom but I am not sure about that. On the other hand I am afraid do buy because I know that their cousins, iphones, are blocked to a specific telecom. Another question is regarding activation. As far as I remembered, my iPhone required me to do an activation step on iTunes and I remember it was also activated (or whatever) on the store (I remembered the salesman connected it to a computer and did some stuff before giving me the device). Is the iPad in europe totally free of operator? totally unblocked? thanks.

    Read the article

  • Cant access websites internally but can externally, happened all of a sudden on Windows Server 2008

    - by Mike Flynn
    Without any type of change I can access sites from within my server, not even Google. I can access them externally. I have no idea where to start. My internet Lan Settings are set to automatic and not to proxy. Nothing was changed on my end, how can I diagnose this issue? Check my server wasnt using a proxy Cant ping or access websites on my server, and others like google nslookup on my sites causes a refusal

    Read the article

  • How to delete a podcast from an iPod and not have it reappear after syncing with iTunes?

    - by Mike
    Hi everyone, Say I have subscribe to a single podcast and I have Episode 1 and Episode 2 on my iPod. Each episode is 30 minutes long. I listen to the entirety of Episode 1 and just the first 15 minutes of Episode 2. I delete Episode 1 using my iPod's menu. Say Episode 3 has just come out. I want to be able to sync with iTunes, and after doing so, have just Episodes 2 and 3 on my iPod (with Episode 2 "half listened to"). How can I do this? Ideal state... Episode 1 = deleted Episode 2 = 15 minutes played already Episode 3 = unplayed I've found that if I set the Sync Podcast option in iTunes to "all new", I get: "All new" Episode 1 = not on the iPod Episode 2 = not on the iPod Episode 3 = unplayed and if I set the Sync Podcast option in iTunes to "all unplayed" "All unplayed" Episode 1 = unplayed Episode 2 = 15 minutes played already Episode 3 = unplayedv neither option does what I want. Is there an option to get my "ideal state"?

    Read the article

  • amplified reflected attack on dns

    - by Mike Janson
    The term is new to me. So I have a few questions about it. I've heard it mostly happens with DNS servers? How do you protect against it? How do you know if your servers can be used as a victim? This is a configuration issue right? my named conf file include "/etc/rndc.key"; controls { inet 127.0.0.1 allow { localhost; } keys { "rndc-key"; }; }; options { /* make named use port 53 for the source of all queries, to allow * firewalls to block all ports except 53: */ // query-source port 53; /* We no longer enable this by default as the dns posion exploit has forced many providers to open up their firewalls a bit */ // Put files that named is allowed to write in the data/ directory: directory "/var/named"; // the default pid-file "/var/run/named/named.pid"; dump-file "data/cache_dump.db"; statistics-file "data/named_stats.txt"; /* memstatistics-file "data/named_mem_stats.txt"; */ allow-transfer {"none";}; }; logging { /* If you want to enable debugging, eg. using the 'rndc trace' command, * named will try to write the 'named.run' file in the $directory (/var/named"). * By default, SELinux policy does not allow named to modify the /var/named" directory, * so put the default debug log file in data/ : */ channel default_debug { file "data/named.run"; severity dynamic; }; }; view "localhost_resolver" { /* This view sets up named to be a localhost resolver ( caching only nameserver ). * If all you want is a caching-only nameserver, then you need only define this view: */ match-clients { 127.0.0.0/24; }; match-destinations { localhost; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; /* these are zones that contain definitions for all the localhost * names and addresses, as recommended in RFC1912 - these names should * ONLY be served to localhost clients: */ include "/var/named/named.rfc1912.zones"; }; view "internal" { /* This view will contain zones you want to serve only to "internal" clients that connect via your directly attached LAN interfaces - "localnets" . */ match-clients { localnets; }; match-destinations { localnets; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; // include "/var/named/named.rfc1912.zones"; // you should not serve your rfc1912 names to non-localhost clients. // These are your "authoritative" internal zones, and would probably // also be included in the "localhost_resolver" view above :

    Read the article

  • ESXi with non-headless VM

    - by Mike
    I'm going to receive a Xeon Server/Workstation soon and I was thinking about installing ESXi to host some server applications that I want (ex: SVN server, Web server, media server, etc). Most of these will be headless VM's. My question is: on top of all these headless VM's, is it possible for ESXi to have another VM that would be non-headless (so that it will output video through the VGA/DVI port)? Or are all VM's within ESXi only accessible through remote connections? I'll be using this non-headless VM like a regular workstation: browsing, development, media, gaming maybe. The other alternative I was thinking about is to install a very lightweight operating system and have the headless VM's running in Virtualbox. If it is possible to have have a non-headless VM, what would be the performance compared to a regular workstation? Noticeable or not when gaming?

    Read the article

  • Bash - Test for multiple users

    - by Mike Purcell
    I am trying to test if current user one of two allowed users to start a process, but I can't seem to get the multi-condition to work correctly: test ($(whoami) != 'mpurcell' || $(whoami) != 'root')) && (echo "Cannot start script as non-ccast user..."; exit 1) Is there a way to test multiple users without have to enter two lines, like this: test $(whoami) != 'mpurcell' && (echo "Cannot start script as non-ccast user..."; exit 1) test $(whoami) != 'root' && (echo "Cannot start script as non-ccast user..."; exit 1)

    Read the article

  • How can I configure Samba to share (read/write) any folder with root permissions?

    - by Mike Toews
    I have a CentOS 5 VirtualBox guest on a Win7x64 host. I am attempting to setup a read/write share a directory owned by root with my Windows host using Samba, but I'm having no luck after running around in circles. To simplify matters, I've disabled my Firewall (/etc/init.d/iptables stop). As security and permissions are irrelevant for this purpose, I'd rather not have to set up another unix user/group/password. Here is the output from testparm Load smb config files from /etc/samba/smb.conf rlimit_max: rlimit_max (1024) below minimum Windows limit (16384) Processing section "[Guest Share]" Loaded services file OK. Server role: ROLE_STANDALONE and the source of /etc/samba/smb.conf: [global] workgroup = WRKGRP netbios name = SMBSERVER security = SHARE load printers = No [Guest Share] comment = Guest access share path = /root/src read only = No guest ok = Yes Running /etc/init.d/smb restart shows an OK status. However, on my Windows host, I can only see the share folder on the guest \\IPv4, but I cannot go into "Guest Share": "The network name cannot be found" error message is a common error, with a likely cause: The user you are trying to access the share with does not have sufficient permissions to access the path for the share. Both read (r) and access (x) should be possible. Am I trying to use root as a passwordless Samba guest? I'd like to, is it possible? How can I configure Samba to share (read/write) any folder with root permissions?

    Read the article

  • PC cannot ping another PC on my home network

    - by Mike C.
    Hello, I am running Windows 7 on my PC, and I am running a Windows 2008 Server VM in Windows Virtual PC. Both machines have network connectivity. However, I cannot ping the VM from the host neither by computer name nor IP. I can ping the host machine from the VM both by computer name and IP. Is there something I need to enable on the VM to allow it to be seen by other machines on my network? Thanks!

    Read the article

  • Can't ping static IP from internal network, only from outside

    - by Mike
    I'm running ubuntu and I have apache running, however, I can't ping internally to my static IP nor browse http://207.40.XXX.XX the web server using my static IP. I can only ping/browse localhost, 127.0.0.1, and 192.168.0.120 OR 207.40.XXX.XX only from the outside world. # cat /etc/hosts 127.0.0.1 localhost 127.0.1.1 my-server.myhost.com my-server # hostname my-server # netstat -tapn tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:29754 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN Any ideas why this is not working?

    Read the article

  • How do we increase the maximum allowed HTTP GET query length in Jetty?

    - by Mike
    We are using Jetty to run an Apache Solr index. We've had some queries that have grown way beyond the previously expected maximum length, and are now having issues wehre most queries are not returning any data because the URL gets truncated. These requests are not being made through a browser, they're being made programmatically using the Apache_Solr_Service PHP library. The application is expecting queries to come in as HTTP GET requests, so simply switching to a POST will not solve this problem. How can we increase the maximum allowed HTTP GET query length in Jetty? Thanks!

    Read the article

  • Sharepoint Discussion Board w/ attachments expiration

    - by Mike
    I want to set a retention policy (DB Settings - Information Management Policy Settings) on a discussion board, but does the attachment get deleted as well? Also, I have a discussion board retention policy right now that isn't working properly. The criteria is: Last Updated + 30 days Delete There are plenty of dicussion items that are long past "Last Updated". Any ideas why?

    Read the article

  • Find/Replace Paragraph End (^13) in Microsoft Word 2007 Merges Paragraphs

    - by Mike Blyth
    I need to replace a target at the beginning of lines with something else. Without wildcards, I can say to replace "^pTarget" with "^pReplacement". With wildcards enabled, I use replace "^13Target" with "^13Replacement". The replacement is successful except that the paragraph is now merged with the previous one in a strange way: The end-paragraph mark is still in place and the paragraph begins on a new line, but Triple clicking to select paragraph selects both the changed paragraph and the one above In a macro, starting in the paragraph above and extending the selection to the end of paragraph causes both paragraphs to be selected. Inter-paragraph spacing disappears between the changed paragraph and the one above. In essence, the paragraph boundary has been removed although the end-paragraph mark is still shown. To duplicate this problem, make a new document Line 1 Line 2 Line 3 (separate paragraphs). Find and replace (with wildcards on) "^13" with "^13". If your result is the same as mine, you will see the problems listed above. I can work around this in the usual way of replacing ^p with something else first, e.g. "^p" = "$", then "$target" = "$replacement", but I'm curious about what's going on. (This is using Word 2007 on Windows 7) I don't know Word XML, but the XML output seems to correspond with the above. Replacing ^13 with ^13 moves the paragraphs together in almost the same way as replacing end-paragraph with end-line (^p = ^l). Here is the relevant XML of the original "Line 1, Line 2, Line 3" in separate paragraphs: <w:p w:rsidR="00BB3032" w:rsidRDefault="00027252"> <w:r><w:t>Line 1</w:t></w:r> </w:p> <w:p w:rsidR="00027252" w:rsidRDefault="00027252"> <w:r><w:t>Line 2</w:t></w:r> </w:p> <w:p w:rsidR="00027252" w:rsidRDefault="00027252"> <w:r><w:t>Line 3</w:t></w:r> </w:p> Now after replacing ^13 with ^13: <w:p w:rsidR="00027252" w:rsidRDefault="00027252"> <w:r><w:t>Line 1</w:t></w:r> <w:r w:rsidR="00C57863"><w:cr/></w:r> <w:r><w:t>Line 2</w:t></w:r> <w:r w:rsidR="00C57863"><w:cr/></w:r> <w:r><w:t>Line 3</w:t></w:r> <w:r w:rsidR="00C57863"><w:cr/></w:r> </w:p> Now original after replacement of ^p with ^l (convert end-paragraph to end-line) <w:p w:rsidR="00027252" w:rsidRDefault="00027252"> <w:r><w:t>Line 1</w:t></w:r> <w:r w:rsidR="00AC7B51"><w:br/></w:r> <w:r><w:t>Line 2</w:t></w:r> <w:r w:rsidR="00AC7B51"><w:br/></w:r> <w:r><w:t>Line 3</w:t></w:r> <w:r w:rsidR="00AC7B51"><w:br/></w:r> </w:p>

    Read the article

  • P2V Wouldn't Boot, Rebuilt initrd, Need to Clean Up

    - by Mike Soule
    We have a CentOS 5.4 server (build 2.6.18-164.el5xen). We went to P2V this server so we can have redundancy, the physical only has one PSU. The P2V only completed 99% of the way, we have a VMWare ticket opened, but they marked the ticket as low priority. I was able to boot into a rescue disc of Red Hat 5.4 and rebuild the initrd with the help of this blog post. Now the only issue is the original server had a modified initrd, which was also from a different OS build and made by an outside provider. We do not have a document outlining modifications. My question is, is it at all possible to copy the initrd off of the physical server and replace it on the virtual and some how have the virtual machine boot? Thanks for any input. Edit: I copied the initrd img from the physical and it recreated the original issue. Here is a screen capture of the error. http://i.imgur.com/MqC73.jpg Edit2: echo Scanning logical volumes lvm vgscan --ignorelockingfailure echo Activating logical volumes lvm vgchange -ay --ignorelockingfailure VolGroup00 resume /dev/VolGroup00/LogVol01 echo Creating root device. mkrootdev -t ext3 -o defaults,ro /dev/VolGroup00/LogVol00 echo Mounting root filesystem. mount /sysroot

    Read the article

  • (Why) are IEC C5/C6 connectors a necessity? Why not use C13/C14?

    - by Mike
    That's a question I was asking myself the first time I saw such a weird C5 plug. That was a while ago, but I came across it again and haven't found an answer yet. The only thing I could find out is that C5 is with 2.5A and C13 with 10A. But I guess it would technically be no problem building an AC adapter (e.g. for laptops) in which you plug the far more common C13 connector. http://en.wikipedia.org/wiki/IEC_connector

    Read the article

  • Some Memory Slots Not Working on MSI FM2-A85XA-G65 Motherboard

    - by Mike Ciaraldi
    Short version of question: Does anyone have an MSI FM2-A85XA-G65 motherboard, who can confirm that all four memory slots work? Long version: Several months ago I bought an MSI FM2-A85XA-G65 motherboard at Newegg. At that point I installed an AMD A8-5500 processor and two sticks of Corsair Vengeance 8 GB DDR3-1866 memory, and put it into my file server. I installed the RAM in slots 1 and 3, as directed in the manual, to enable dual-channel memory access. It seemed to work fine, so I bought a second identical mobo (which arrived dead, but was quickly replaced by Newegg) and set of RAM, installed an A10-5800K, and put that into my production Linux machine. Again, it seemed to work well. Eventually I happened to notice that on the server only 8 GB of RAM appeared in the BIOS. I tried each of the slots and memory modules individually and in various combinations. I even swapped processors with the production machine. The result was that putting memory in slots 1 and 2 worked (showing a total of 16 GB), but any memory in slots 3 or 4 was not recognized. However, all four memory slots in the production machine worked, and I confirmed this with both processors. I contacted MSI and arranged to ship the defective mobo back to them for replacement under warranty. I did not want my file server to be down in the interim, and I had another machine I wanted to upgrade, so I bought a third identical mobo to use. That one had the same problem -- only memory slots 1 and 2 worked. I tested it thoroughly with multiple processors and memory sticks. I sent the defective mobo back to MSI and they sent me a new one. This has the same memory slot problem. So I sent it back. The replacement arrived the other day and shows the same problem. I contacted MSI yet again and they said that nobody else has reported memory slot problems on this board and it must be my processor. So my score so far is, out of six boards of this model, I have: One where all four slots work. One which was dead on arrival. Four where only memory slots 1 and 2 work. Before I tear my other machines apart and start swapping processors again I thought I would ask if anyone else has this exact model motherboard and could confirm that all four memory slots either do or do not work. According to MSI you should be able to just plug a single memory module into any of the slots and it will work (and it does on the one mobo I have which works correctly). If you have not yet used all four slots, this is a good time to test them so you know if you can expand your memory in the future. Thanks in advance to anyone who can help.

    Read the article

  • MOSS 2007 SP2 DB index maintanance

    - by Mike H
    I've read in the "About Service Pack 2 for SharePoint Products and Technologies" paper that SP2 includes an update for the Update Statistics Timer Job that causes SharePoint to run SQL Server's online index rebuild feature (p.4). I'm uncertain of the terminology here but is this the rebuild that SQL Server uses for minor fragmentation (up to around 40%) and leaves the DB online? I'm also guessing that this will therefore not rebuild severely fragmented indexes as I think this requires the DB to come offline. Can someone please confirm my belief here?

    Read the article

  • Resolve `strace` file number to a filename

    - by Mike Pennington
    I am debugging a problem where MoinMoin on CentOS is throwing a permissions error, but I can't track down where the problematic file / directory is. I ran strace -vp <pid> on the apache pid; when I have the problem I see this: epoll_wait(10, {{EPOLLIN, {u32=3487534344, u64=140367313734920}}}, 2, 10000) = 1 accept4(6, {sa_family=AF_INET6, sin6_port=htons(52621), inet_pton (AF_INET6, "::ffff:105.193.30.91", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, [28], SOCK_CLOEXEC) = 11 ## Later on... read(7, 0x7fffa658ad7f, 1) = -1 EAGAIN (Resource temporarily unavailable) However, since apache is already running, I see no corresponding open() on the file referred to as 7; thus I see the permissions problem, but I still don't know which file is the problem. I know I could try to catch all the file opens when I respawn apache, but I'm hoping there is a way to map file 7 to a real filename... is there a way to do this?

    Read the article

  • How can I remove old log entries from a log file and archive them somewhere else in Linux?

    - by Mike B
    CentOS 4.x I apologize in advance if this is not the appropriate place to ask this question. It pertains to a linux server / IT admin task. I've got a log file on an old CentOS 4.x server and I want to remove log entries older than a certain date and place them in a new file for archive. Here's an example of the log format: 2012-06-07 22:32:01,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123|blah blah blah 2012-06-07 22:32:03,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123|blah blah blah 2012-06-07 22:32:04,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123| 2012-06-07 22:32:10,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123|blah blah blah 2012-06-07 22:32:12,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123|blah blah blah 2012-06-07 22:32:15,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123| 2012-06-07 22:32:40,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123|blah blah blah 2012-06-07 22:32:58,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123|blah blah blah 2012-06-07 22:33:01,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123| 2012-06-07 22:33:01,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123|blah blah blah 2012-06-07 22:33:02,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123| Essentially, I'm looking for a one-liner that will do the following: Find any events older than a provided YYYY-MM-DD and remove them from the primary log file. Take the deleted events from step 1 and put them in a new log file (Optional) Compress the new archive log file holding the deleted events. I'm aware that there are log rotate tools that do this but this should just be a one-time task so I'd prefer not to set that up. Additional notes: If the date part it tricky or too resource intensive, an alternative would be to just keep the last X number of lines and move the rest. I was originally thinking of something like tail -n 10000 > newfile.txt but that would mean moving the "good" logs to a new file and then doing a name swap... and then I'd still need to remove the "good" entries from the archive. This particular log file is pretty large (1 GB) so I'd prefer the task to be as resource and time efficient as possible. The extra pipes in the log concern me and I'm not sure if I'd need extra protection in the commands to avoid that from causing problems.

    Read the article

  • How to recover deleted files on ext3 fs

    - by Mike
    I have a drive which was using the ext3 filesystem. I am told that about 10Gb of data was deleted off the drive (probably via rm). The drive is currently mounted as read-only to preserve all data. Does anyone know of a method to restore some or all of the data? Also if it helps, the OS was Fedora. I've also been told that the data is mostly ASCII fortan source code and Matlab files. Conclusion I have finally managed to get the data back, and with the simplest means ever! After weeks of trying and failing to bring back much of any data, I brought someone in today to take a look at it and offer suggestions, he simply cd'd to the directory and everything was there! It was never lost in the first place!!! Needless to say I feel really dumb right now, but I learned quite a lot with this whole fiasco. At any rate, while I was looking through data forensics solutions, I found that the Autopsy, or more specifically the SleuthKit was the most helpful. So I will accept that as the final answer. I would also like to note for anyone that comes across this later on that the most up-voted (currently) answer by sekenre was also helpful and I learned a lot, but ultimately it did not help with the type (very many, and some being very large) of files I was dealing with. So thank to all you that provided suggestions and wish you all the best!

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >