Search Results

Search found 5380 results on 216 pages for 'primary'.

Page 41/216 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• What's up with LDoms: Part 4 - Virtual Networking Explained

  - by Stefan Hinker

  I'm back from my summer break (and some pressing business that kept me away from this), ready to continue with Oracle VM Server for SPARC ;-) In this article, we'll have a closer look at virtual networking.  Basic connectivity as we've seen it in the first, simple example, is easy enough.  But there are numerous options for the virtual switches and virtual network ports, which we will discuss in more detail now.   In this section, we will concentrate on virtual networking - the capabilities of virtual switches and virtual network ports - only.  Other options involving hardware assignment or redundancy will be covered in separate sections later on. There are two basic components involved in virtual networking for LDoms: Virtual switches and virtual network devices.  The virtual switch should be seen just like a real ethernet switch.  It "runs" in the service domain and moves ethernet packets back and forth.  A virtual network device is plumbed in the guest domain.  It corresponds to a physical network device in the real world.  There, you'd be plugging a cable into the network port, and plug the other end of that cable into a switch.  In the virtual world, you do the same:  You create a virtual network device for your guest and connect it to a virtual switch in a service domain.  The result works just like in the physical world, the network device sends and receives ethernet packets, and the switch does all those things ethernet switches tend to do. If you look at the reference manual of Oracle VM Server for SPARC, there are numerous options for virtual switches and network devices.  Don't be confused, it's rather straight forward, really.  Let's start with the simple case, and work our way to some more sophisticated options later on.  In many cases, you'll want to have several guests that communicate with the outside world on the same ethernet segment.  In the real world, you'd connect each of these systems to the same ethernet switch.  So, let's do the same thing in the virtual world: root@sun # ldm add-vsw net-dev=nxge2 admin-vsw primary root@sun # ldm add-vnet admin-net admin-vsw mars root@sun # ldm add-vnet admin-net admin-vsw venus We've just created a virtual switch called "admin-vsw" and connected it to the physical device nxge2.  In the physical world, we'd have powered up our ethernet switch and installed a cable between it and our big enterprise datacenter switch.  We then created a virtual network interface for each one of the two guest systems "mars" and "venus" and connected both to that virtual switch.  They can now communicate with each other and with any system reachable via nxge2.  If primary were running Solaris 10, communication with the guests would not be possible.  This is different with Solaris 11, please see the Admin Guide for details.  Note that I've given both the vswitch and the vnet devices some sensible names, something I always recommend. Unless told otherwise, the LDoms Manager software will automatically assign MAC addresses to all network elements that need one.  It will also make sure that these MAC addresses are unique and reuse MAC addresses to play nice with all those friendly DHCP servers out there.  However, if we want to do this manually, we can also do that.  (One reason might be firewall rules that work on MAC addresses.)  So let's give mars a manually assigned MAC address: root@sun # ldm set-vnet mac-addr=0:14:4f:f9:c4:13 admin-net mars Within the guest, these virtual network devices have their own device driver.  In Solaris 10, they'd appear as "vnet0".  Solaris 11 would apply it's usual vanity naming scheme.  We can configure these interfaces just like any normal interface, give it an IP-address and configure sophisticated routing rules, just like on bare metal.  In many cases, using Jumbo Frames helps increase throughput performance.  By default, these interfaces will run with the standard ethernet MTU of 1500 bytes.  To change this,  it is usually sufficient to set the desired MTU for the virtual switch.  This will automatically set the same MTU for all vnet devices attached to that switch.  Let's change the MTU size of our admin-vsw from the example above: root@sun # ldm set-vsw mtu=9000 admin-vsw primary Note that that you can set the MTU to any value between 1500 and 16000.  Of course, whatever you set needs to be supported by the physical network, too. Another very common area of network configuration is VLAN tagging. This can be a little confusing - my advise here is to be very clear on what you want, and perhaps draw a little diagram the first few times.  As always, keeping a configuration simple will help avoid errors of all kind.  Nevertheless, VLAN tagging is very usefull to consolidate different networks onto one physical cable.  And as such, this concept needs to be carried over into the virtual world.  Enough of the introduction, here's a little diagram to help in explaining how VLANs work in LDoms: Let's remember that any VLANs not explicitly tagged have the default VLAN ID of 1. In this example, we have a vswitch connected to a physical network that carries untagged traffic (VLAN ID 1) as well as VLANs 11, 22, 33 and 44.  There might also be other VLANs on the wire, but the vswitch will ignore all those packets.  We also have two vnet devices, one for mars and one for venus.  Venus will see traffic from VLANs 33 and 44 only.  For VLAN 44, venus will need to configure a tagged interface "vnet44000".  For VLAN 33, the vswitch will untag all incoming traffic for venus, so that venus will see this as "normal" or untagged ethernet traffic.  This is very useful to simplify guest configuration and also allows venus to perform Jumpstart or AI installations over this network even if the Jumpstart or AI server is connected via VLAN 33.  Mars, on the other hand, has full access to untagged traffic from the outside world, and also to VLANs 11,22 and 33, but not 44.  On the command line, we'd do this like this: root@sun # ldm add-vsw net-dev=nxge2 pvid=1 vid=11,22,33,44 admin-vsw primary root@sun # ldm add-vnet admin-net pvid=1 vid=11,22,33 admin-vsw mars root@sun # ldm add-vnet admin-net pvid=33 vid=44 admin-vsw venus Finally, I'd like to point to a neat little option that will make your live easier in all those cases where configurations tend to change over the live of a guest system.  It's the "id=<somenumber>" option available for both vswitches and vnet devices.  Normally, Solaris in the guest would enumerate network devices sequentially.  However, it has ways of remembering this initial numbering.  This is good in the physical world.  In the virtual world, whenever you unbind (aka power off and disassemble) a guest system, remove and/or add network devices and bind the system again, chances are this numbering will change.  Configuration confusion will follow suit.  To avoid this, nail down the initial numbering by assigning each vnet device it's device-id explicitly: root@sun # ldm add-vnet admin-net id=1 admin-vsw venus Please consult the Admin Guide for details on this, and how to decipher these network ids from Solaris running in the guest. Thanks for reading this far.  Links for further reading are essentially only the Admin Guide and Reference Manual and can be found above.  I hope this is useful and, as always, I welcome any comments.

  Read the article

• SQL SERVER – Shrinking Database is Bad – Increases Fragmentation – Reduces Performance

  - by pinaldave

  Earlier, I had written two articles related to Shrinking Database. I wrote about why Shrinking Database is not good. SQL SERVER – SHRINKDATABASE For Every Database in the SQL Server SQL SERVER – What the Business Says Is Not What the Business Wants I received many comments on Why Database Shrinking is bad. Today we will go over a very interesting example that I have created for the same. Here are the quick steps of the example. Create a test database Create two tables and populate with data Check the size of both the tables Size of database is very low Check the Fragmentation of one table Fragmentation will be very low Truncate another table Check the size of the table Check the fragmentation of the one table Fragmentation will be very low SHRINK Database Check the size of the table Check the fragmentation of the one table Fragmentation will be very HIGH REBUILD index on one table Check the size of the table Size of database is very HIGH Check the fragmentation of the one table Fragmentation will be very low Here is the script for the same. USE MASTER GO CREATE DATABASE ShrinkIsBed GO USE ShrinkIsBed GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Create FirstTable CREATE TABLE FirstTable (ID INT, FirstName VARCHAR(100), LastName VARCHAR(100), City VARCHAR(100)) GO -- Create Clustered Index on ID CREATE CLUSTERED INDEX [IX_FirstTable_ID] ON FirstTable ( [ID] ASC ) ON [PRIMARY] GO -- Create SecondTable CREATE TABLE SecondTable (ID INT, FirstName VARCHAR(100), LastName VARCHAR(100), City VARCHAR(100)) GO -- Create Clustered Index on ID CREATE CLUSTERED INDEX [IX_SecondTable_ID] ON SecondTable ( [ID] ASC ) ON [PRIMARY] GO -- Insert One Hundred Thousand Records INSERT INTO FirstTable (ID,FirstName,LastName,City) SELECT TOP 100000 ROW_NUMBER() OVER (ORDER BY a.name) RowID, 'Bob', CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%2 = 1 THEN 'Smith' ELSE 'Brown' END, CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 1 THEN 'New York' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 5 THEN 'San Marino' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 3 THEN 'Los Angeles' ELSE 'Houston' END FROM sys.all_objects a CROSS JOIN sys.all_objects b GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Insert One Hundred Thousand Records INSERT INTO SecondTable (ID,FirstName,LastName,City) SELECT TOP 100000 ROW_NUMBER() OVER (ORDER BY a.name) RowID, 'Bob', CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%2 = 1 THEN 'Smith' ELSE 'Brown' END, CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 1 THEN 'New York' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 5 THEN 'San Marino' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 3 THEN 'Los Angeles' ELSE 'Houston' END FROM sys.all_objects a CROSS JOIN sys.all_objects b GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Check Fragmentations in the database SELECT avg_fragmentation_in_percent, fragment_count FROM sys.dm_db_index_physical_stats (DB_ID(), OBJECT_ID('SecondTable'), NULL, NULL, 'LIMITED') GO Let us check the table size and fragmentation. Now let us TRUNCATE the table and check the size and Fragmentation. USE MASTER GO CREATE DATABASE ShrinkIsBed GO USE ShrinkIsBed GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Create FirstTable CREATE TABLE FirstTable (ID INT, FirstName VARCHAR(100), LastName VARCHAR(100), City VARCHAR(100)) GO -- Create Clustered Index on ID CREATE CLUSTERED INDEX [IX_FirstTable_ID] ON FirstTable ( [ID] ASC ) ON [PRIMARY] GO -- Create SecondTable CREATE TABLE SecondTable (ID INT, FirstName VARCHAR(100), LastName VARCHAR(100), City VARCHAR(100)) GO -- Create Clustered Index on ID CREATE CLUSTERED INDEX [IX_SecondTable_ID] ON SecondTable ( [ID] ASC ) ON [PRIMARY] GO -- Insert One Hundred Thousand Records INSERT INTO FirstTable (ID,FirstName,LastName,City) SELECT TOP 100000 ROW_NUMBER() OVER (ORDER BY a.name) RowID, 'Bob', CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%2 = 1 THEN 'Smith' ELSE 'Brown' END, CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 1 THEN 'New York' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 5 THEN 'San Marino' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 3 THEN 'Los Angeles' ELSE 'Houston' END FROM sys.all_objects a CROSS JOIN sys.all_objects b GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Insert One Hundred Thousand Records INSERT INTO SecondTable (ID,FirstName,LastName,City) SELECT TOP 100000 ROW_NUMBER() OVER (ORDER BY a.name) RowID, 'Bob', CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%2 = 1 THEN 'Smith' ELSE 'Brown' END, CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 1 THEN 'New York' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 5 THEN 'San Marino' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 3 THEN 'Los Angeles' ELSE 'Houston' END FROM sys.all_objects a CROSS JOIN sys.all_objects b GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Check Fragmentations in the database SELECT avg_fragmentation_in_percent, fragment_count FROM sys.dm_db_index_physical_stats (DB_ID(), OBJECT_ID('SecondTable'), NULL, NULL, 'LIMITED') GO You can clearly see that after TRUNCATE, the size of the database is not reduced and it is still the same as before TRUNCATE operation. After the Shrinking database operation, we were able to reduce the size of the database. If you notice the fragmentation, it is considerably high. The major problem with the Shrink operation is that it increases fragmentation of the database to very high value. Higher fragmentation reduces the performance of the database as reading from that particular table becomes very expensive. One of the ways to reduce the fragmentation is to rebuild index on the database. Let us rebuild the index and observe fragmentation and database size. -- Rebuild Index on FirstTable ALTER INDEX IX_SecondTable_ID ON SecondTable REBUILD GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Check Fragmentations in the database SELECT avg_fragmentation_in_percent, fragment_count FROM sys.dm_db_index_physical_stats (DB_ID(), OBJECT_ID('SecondTable'), NULL, NULL, 'LIMITED') GO You can notice that after rebuilding, Fragmentation reduces to a very low value (almost same to original value); however the database size increases way higher than the original. Before rebuilding, the size of the database was 5 MB, and after rebuilding, it is around 20 MB. Regular rebuilding the index is rebuild in the same user database where the index is placed. This usually increases the size of the database. Look at irony of the Shrinking database. One person shrinks the database to gain space (thinking it will help performance), which leads to increase in fragmentation (reducing performance). To reduce the fragmentation, one rebuilds index, which leads to size of the database to increase way more than the original size of the database (before shrinking). Well, by Shrinking, one did not gain what he was looking for usually. Rebuild indexing is not the best suggestion as that will create database grow again. I have always remembered the excellent post from Paul Randal regarding Shrinking the database is bad. I suggest every one to read that for accuracy and interesting conversation. Let us run following script where we Shrink the database and REORGANIZE. -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Check Fragmentations in the database SELECT avg_fragmentation_in_percent, fragment_count FROM sys.dm_db_index_physical_stats (DB_ID(), OBJECT_ID('SecondTable'), NULL, NULL, 'LIMITED') GO -- Shrink the Database DBCC SHRINKDATABASE (ShrinkIsBed); GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Check Fragmentations in the database SELECT avg_fragmentation_in_percent, fragment_count FROM sys.dm_db_index_physical_stats (DB_ID(), OBJECT_ID('SecondTable'), NULL, NULL, 'LIMITED') GO -- Rebuild Index on FirstTable ALTER INDEX IX_SecondTable_ID ON SecondTable REORGANIZE GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Check Fragmentations in the database SELECT avg_fragmentation_in_percent, fragment_count FROM sys.dm_db_index_physical_stats (DB_ID(), OBJECT_ID('SecondTable'), NULL, NULL, 'LIMITED') GO You can see that REORGANIZE does not increase the size of the database or remove the fragmentation. Again, I no way suggest that REORGANIZE is the solution over here. This is purely observation using demo. Read the blog post of Paul Randal. Following script will clean up the database -- Clean up USE MASTER GO ALTER DATABASE ShrinkIsBed SET SINGLE_USER WITH ROLLBACK IMMEDIATE GO DROP DATABASE ShrinkIsBed GO There are few valid cases of the Shrinking database as well, but that is not covered in this blog post. We will cover that area some other time in future. Additionally, one can rebuild index in the tempdb as well, and we will also talk about the same in future. Brent has written a good summary blog post as well. Are you Shrinking your database? Well, when are you going to stop Shrinking it? Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Index, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Kubuntu 12.04 - Touchpad and keyboard stopped working at random

  - by StepTNT

  As in the title, I've got this problem with my Kubuntu 12.04. At first I've thought that the whole system was hung, but it happened again 5 minutes ago and, while the keyboard and the touchpad stopped working, the music was still playing, so I guess that's just an "input" problem, because the system was still working! Any solution? Is there some data that you need to know about my setup? EDIT: Added my lshw outout description: Notebook product: N53SV () vendor: ASUSTeK Computer Inc. version: 1.0 serial: B2N0AS17695408A width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=N uuid=8083F2DA-A43E-E081-3F3F-BCAEC55F8AA1 *-core description: Motherboard product: N53SV vendor: ASUSTeK Computer Inc. physical id: 0 version: 1.0 serial: BSN12345678901234567 slot: MIDDLE *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: N53SV.214 date: 08/10/2011 size: 64KiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 800MHz capacity: 4GHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache description: L1 cache physical id: 5 slot: L1-Cache size: 32KiB capacity: 32KiB capabilities: internal write-back instruction *-memory description: System Memory physical id: 40 slot: System board or motherboard size: 10GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: 99U5428-040.A00LF vendor: Kingston physical id: 0 serial: 103C28C3 slot: ChannelA-DIMM0 size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 1 serial: 58383D1F slot: ChannelA-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 2 serial: 58183D19 slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 3 serial: 58183C8F slot: ChannelB-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:d000(size=4096) memory:db000000-dc0fffff ioport:c0000000(size=301989888) *-generic UNCLAIMED description: Unassigned class product: Illegal Vendor ID vendor: Illegal Vendor ID physical id: 0 bus info: pci@0000:01:00.0 version: ff width: 32 bits clock: 66MHz capabilities: bus_master vga_palette cap_list configuration: latency=255 maxlatency=255 mingnt=255 resources: memory:db000000-dbffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:d000(size=128) memory:dc000000-dc07ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:dc400000-dc7fffff memory:b0000000-bfffffff ioport:e000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:48 memory:df00b000-df00b00f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:df008000-df0083ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:49 memory:df000000-df003fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:c000(size=4096) memory:de600000-deffffff ioport:d4200000(size=10485760) *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:b000(size=4096) memory:ddc00000-de5fffff ioport:d3700000(size=10485760) *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 48:5d:60:f2:2c:fd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-24-generic firmware=N/A ip=192.168.1.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:ddc00000-ddc0ffff *-pci:3 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:a000(size=4096) memory:dd200000-ddbfffff ioport:d2c00000(size=10485760) *-usb description: USB controller product: FL1000G USB 3.0 Host Controller vendor: Fresco Logic physical id: 0 bus info: pci@0000:04:00.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:19 memory:dd200000-dd20ffff *-pci:4 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 6 vendor: Intel Corporation physical id: 1c.5 bus info: pci@0000:00:1c.5 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:44 ioport:9000(size=4096) memory:dc800000-dd1fffff ioport:d2100000(size=10485760) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 06 serial: bc:ae:c5:5f:8a:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:46 ioport:9000(size=256) memory:d2104000-d2104fff memory:d2100000-d2103fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:df007000-df0073ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:e0b0(size=8) ioport:e0a0(size=4) ioport:e090(size=8) ioport:e080(size=4) ioport:e060(size=32) memory:df006000-df0067ff *-disk description: ATA Disk product: ST9750420AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0002 serial: 5WS0A7QR size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=e0c5913d *-volume:0 description: Windows FAT volume vendor: MSDOS5.0 physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: FAT32 serial: 4ce5-3acb size: 3004MiB capacity: 3004MiB capabilities: primary fat initialized configuration: FATs=2 filesystem=fat *-volume:1 description: EXT4 volume vendor: Linux physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 logical name: / version: 1.0 serial: c198cc2a-d86a-4460-a4d5-3fc0b21e439c size: 28GiB capacity: 28GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-03-15 16:53:54 filesystem=ext4 lastmountpoint=/ modified=2012-05-02 18:52:04 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,acl,barrier=1,data=ordered mounted=2012-05-09 19:06:01 state=mounted *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 4c1cdebc-ec09-2947-a3b5-c1f9f1cddc1c size: 152GiB capacity: 152GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-02-22 16:02:47 filesystem=ntfs label=OS state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 514GiB capacity: 514GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 10GiB capabilities: nofs *-logicalvolume:1 description: HPFS/NTFS partition physical id: 6 logical name: /dev/sda6 capacity: 504GiB *-cdrom description: DVD-RAM writer product: BD-MLT UJ240AS vendor: MATSHITA physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.00 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:df005000-df0050ff ioport:e040(size=32)

  Read the article

• layout is not included in all pages in asp.net mvc4 application

  - by Ahmed

  I am developing an asp.net mvc4 application with Bootstrap 3 and i've _Layout.cshtml in "Shared" folder , in Views, i've two pages, "Index and "Register" and i've included Layout in both of these Views but It seems that Layout is included in only "Index and not in "Register" View. Following are my Index and Register Views @{ ViewBag.Title = "Index"; Layout = "~/Views/Shared/_Layout.cshtml"; } <h2 align="center" class="bg-info">Login</h2> <form class="form-horizontal" role="form"> <div class="form-group"> <label for="inputEmail3" class="col-sm-2 control-label"><strong>UserName : </strong></label> <div class="col-sm-10"> <input type="email" class="form-control" id="inputEmail3" placeholder="UserName"> </div> </div> <div class="form-group"> <label for="inputPassword3" class="col-sm-2 control-label"><strong>Password</strong></label> <div class="col-sm-10"> <input type="password" class="form-control" id="inputPassword3" placeholder="Password"> </div> </div> <div class="form-group"> <div class="col-sm-offset-2 col-sm-10"> <div class="checkbox"> <label> <input type="checkbox"> Remember me </label> </div> </div> </div> <div class="form-group"> <div class="col-sm-offset-2 col-sm-10"> <button type="submit" class="btn btn-primary">Sign in</button> </div> </div> <h2 align="center" class="bg-info">SignIn With Other Services</h2> </form> <form class="form-horizontal" role="form" method="post" action="/Home/FacebookLogin"> <div class="form-group"> <div class="col-sm-offset-2 col-sm-10"> <button type="submit" class="btn btn-primary">SignIn with Facebook</button> </div> </div> </form> <h2 align="center" class="bg-info">Don't Have an Account?</h2> <form class="form-horizontal" role="form" method="post" action="/Home/Register"> <div class="form-group"> <div class="col-sm-offset-2 col-sm-10"> <button type="submit" class="btn btn-primary">Register</button> </div> </div> </form> ![@{ ViewBag.Title = "Register"; Layout = "~/Views/Shared/_Layout.cshtml"; } <h2 align="center" class="bg-info">Register</h2> <form class="form-horizontal" role="form"> <div class="form-group"> <label for="inputEmail3" class="col-sm-2 control-label"><strong>UserName : </strong></label> <div class="col-sm-10"> <input type="email" class="form-control" id="uname" name="uname" placeholder="UserName"> <input type="button" class="btn btn-primary" id="check" value="Check Availability" > <h4 class="bg-warning"></h4> </div> </div> <div class="form-group"> <label for="inputPassword3" class="col-sm-2 control-label"><strong>Password</strong></label> <div class="col-sm-10"> <input type="password" class="form-control" id="upass" name="upass" placeholder="Password"> </div> </div> <div class="form-group"> <label for="inputPassword3" class="col-sm-2 control-label"><strong>Retype Password</strong></label> <div class="col-sm-10"> <input type="password" class="form-control" id="retype" placeholder="Password"> </div> </div> <div class="form-group"> <div class="col-sm-offset-2 col-sm-10"> <button type="submit" class="btn btn-primary">Register</button> </div> </div> </form>]

  Read the article

• SQL SERVER – Integrate Your Data with Skyvia – Cloud ETL Solution

  - by Pinal Dave

  In our days data integration often becomes a key aspect of business success. For business analysts it’s very important to get integrated data from various sources, such as relational databases, cloud CRMs, etc. to make correct and successful decisions. There are various data integration solutions on market, and today I will tell about one of them – Skyvia. Skyvia is a cloud data integration service, which allows integrating data in cloud CRMs and different relational databases. It is a completely online solution and does not require anything except for a browser. Skyvia provides powerful etl tools for data import, export, replication, and synchronization for SQL Server and other databases and cloud CRMs. You can use Skyvia data import tools to load data from various sources to SQL Server (and SQL Azure). Skyvia supports such cloud CRMs as Salesforce and Microsoft Dynamics CRM and such databases as MySQL and PostgreSQL. You even can migrate data from SQL Server to SQL Server, or from SQL Server to other databases and cloud CRMs. Additionally Skyvia supports import of CSV files, either uploaded manually or stored on cloud file storage services, such as Dropbox, Box, Google Drive, or FTP servers. When data import is not enough, Skyvia offers bidirectional data synchronization. With this tool, you can synchronize SQL Server data with other databases and cloud CRMs. After performing the first synchronization, Skyvia tracks data changes in the synchronized data storages. In SQL Server databases (and other relational databases) it creates additional tracking tables and triggers. This allows synchronizing only the changed data. Skyvia also maps records by their primary key values to each other, so it does not require different sources to have the same primary key structure. It still can match the corresponding records without having to add any additional columns or changing data structure. The only requirement for synchronization is that primary keys must be autogenerated. With Skyvia it’s not necessary for data to have the same structure in integrated data storages. Skyvia supports powerful mapping mechanisms that allow synchronizing data with completely different structure. It provides support for complex mathematical and string expressions when mapping data, using lookups, etc. You may use data splitting – loading data from a single CSV file or source table to multiple related target tables. Or you may load data from several source CSV files or tables to several related target tables. In each case Skyvia preserves data relations. It builds corresponding relations between the target data automatically. When you often work with cloud CRM data, native CRM data reporting and analysis tools may be not enough for you. And there is a vast set of professional data analysis and reporting tools available for SQL Server. With Skyvia you can quickly copy your cloud CRM data to an SQL Server database and apply corresponding SQL Server tools to the data. In such case you can use Skyvia data replication tools. It allows you to quickly copy cloud CRM data to SQL Server or other databases without customizing any mapping. You need just to specify columns to copy data from. Target database tables will be created automatically. Skyvia offers powerful filtering settings to replicate only the records you need. Skyvia also provides capability to export data from SQL Server (including SQL Azure) and other databases and cloud CRMs to CSV files. These files can be either downloadable manually or loaded to cloud file storages or FTP server. You can use export, for example, to backup SQL Azure data to Dropbox. Any data integration operation can be scheduled for automatic execution. Thus, you can automate your SQL Azure data backup or data synchronization – just configure it once, then schedule it, and benefit from automatic data integration with Skyvia. Currently registration and using Skyvia is completely free, so you can try it yourself and find out whether its data migration and integration tools suits for you. Visit this link to register on Skyvia: https://app.skyvia.com/register Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Cloud Computing

  Read the article

• Sparse virtual machine disk image resizing weirdness?

  - by Matt H

  I have a partitioned virtual machine disk image created by vmware. What I want to do is resize that by 10GB. The file size is showing as 64424509440. Or 60GB. So I ran this: dd if=/dev/zero of=./win7.img seek=146800640 count=0 It ran without errors and I can verify the new size is in fact 75161927680 bytes or 70GB. This is where it gets a little odd. I started the guest domain in xen which is a Windows 7 enterprise machine. What I was expecting to see in diskmgmt.msc is 2 partitions. 1 system partition at the start of around 100MB and near 60GB partition (which is C drive) followed by around 10GB of free space. Actually what I saw was a 70GB partition!?! That confused me... so I decided to run the Check Disk which when you set it on the C drive it asks you to reboot so it'll run on boot. So I did that and during the boot it ran the checks. It got all the way through stage 3 and didn't show any errors at all. Looked at the partitions in disk manager and now C drive has shrunk back to 60GB and there is no free space. What gives? Ok, I thought I'd try mounting it under Dom0 and examining it with fdisk. This is what I get when mounted sudo xl block-attach 0 tap:aio:/home/xen/vms/otoy_v1202-xen.img xvda w sudo fdisk -l /dev/xvda Disk /dev/xvda: 64.4 GB, 64424509440 bytes 255 heads, 63 sectors/track, 7832 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x582dfc96 Device Boot Start End Blocks Id System /dev/xvda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/xvda2 13 7833 62810112 7 HPFS/NTFS Note the cylinder boundary comment. When I run sudo cfdisk /dev/xvda I get: FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylinder Press any key to exit cfdisk So I guess this is a bigger problem than first thought. How can I fix this? EDIT: Oops, the cylinder boundary thing is not a problem at all since disks have used LBA etc. So that threw me for a moment... still the problem exists... Now this output looks a little different. sudo sfdisk -uS -l /dev/xvda Disk /dev/xvda: 7832 cylinders, 255 heads, 63 sectors/track Units = sectors of 512 bytes, counting from 0 Device Boot Start End #sectors Id System /dev/xvda1 * 2048 206847 204800 7 HPFS/NTFS /dev/xvda2 206848 125827071 125620224 7 HPFS/NTFS /dev/xvda3 0 - 0 0 Empty /dev/xvda4 0 - 0 0 Empty BTW: I do have a backup of the image so if you help me mess it up that's ok. EDIT: sudo parted /dev/xvda print free Model: Xen Virtual Block Device (xvd) Disk /dev/xvda: 64.4GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 32.3kB 1049kB 1016kB Free Space 1 1049kB 106MB 105MB primary ntfs boot 2 106MB 64.4GB 64.3GB primary ntfs 64.4GB 64.4GB 1049kB Free Space Cool. Linux is showing free space is 10GB which is what I expect. The problem is windows isn't seeing this?

  Read the article

• ??Data Guard???????Redo GAP

  - by JaneZhang(???)

    ?Oracle Data Guard?,Redo Gap??????????????????redo????????????,?????????redo??????????,?????????????:ARC:????MRP:Media Recovery Process,????????redoRFS:Remote File Server ,???????????redo??FAL:Fetch Archive Log????:?????????gap?,??????????gap?????:Oracle 11.2.0.2 on Linux 5.????:1.?????????????:Primary:MAX(SEQUENCE#)--------------           86Standby:MAX(SEQUENCE#)--------------           862. ??????,??gap:????????: #ifconfig eth0 down???????switch logfile:SQL>alter system switch logfile;SQL>alter system switch logfile;...Primary:MAX(SEQUENCE#)--------------           96????alert log?????????????:TNS-00513: Destination host unreachable   nt secondary err code: 101   nt OS err code: 0Error 12543 received logging on to the standbyFAL[server, ARCp]: Error 12543 creating remote archivelog file 'STANDBY'FAL[server, ARCp]: FAL archive failed, see trace file.ARCH: FAL archive failed. Archiver continuingORACLE Instance orcl - Archival Error. Archiver continuing.3.??????????????,????????????:mv *.arc ../4. ???????:#ifconfig eth0 up5.??,???ARC???????????????????MRP???gap??gap fetching.??alert log:Thu Mar 29 19:58:49 2012Media Recovery Waiting for thread 1 sequence 87 (in transit) <====  ?????,??87...Thu Mar 29 20:08:45 2012...Media Recovery Waiting for thread 1 sequence 94Thu Mar 29 20:11:01 2012RFS[61]: Assigned to RFS process 13643RFS[61]: Opened log for thread 1 sequence 97 dbid 1285401128 branch 757620395Archived Log entry 80 added for thread 1 sequence 97 rlc 757620395 ID 0x4c9d8928 dest 2:Thu Mar 29 20:11:02 2012RFS[62]: Assigned to RFS process 13645RFS[62]: Selected log 4 for thread 1 sequence 98 dbid 1285401128 branch 757620395Thu Mar 29 20:11:02 2012Primary database is in MAXIMUM PERFORMANCE modeRe-archiving standby log 4 thread 1 sequence 98Thu Mar 29 20:11:02 2012Archived Log entry 81 added for thread 1 sequence 98 ID 0x4c9d8928 dest 1:RFS[63]: Assigned to RFS process 13647RFS[63]: Selected log 4 for thread 1 sequence 99 dbid 1285401128 branch 757620395Thu Mar 29 20:11:05 2012Fetching gap sequence in thread 1, gap sequence 94-96 <===========?gap...6.??MRP?trace,?????MRP ??fetching gap:MRP trace:*** 2012-03-29 20:08:45.375 4265 krsh.cMedia Recovery Waiting for thread 1 sequence 94*** 2012-03-29 20:11:05.543*** 2012-03-29 20:11:05.543 4265 krsh.cFetching gap sequence in thread 1, gap sequence 94-96 <==========MRP?gap.Redo shipping client performing standby login*** 2012-03-29 20:11:05.593 4595 krsu.cLogged on to standby successfullyClient logon and security negotiation successful!7.????????????,???RFS????????, MRP ????????apply.Thu Mar 29 20:12:06 2012RFS[64]: Assigned to RFS process 13649RFS[64]: Opened log for thread 1 sequence 94 dbid 1285401128 branch 757620395Archived Log entry 82 added for thread 1 sequence 94 rlc 757620395 ID 0x4c9d8928 dest 2:Thu Mar 29 20:12:06 2012RFS[65]: Assigned to RFS process 13651RFS[65]: Opened log for thread 1 sequence 95 dbid 1285401128 branch 757620395Thu Mar 29 20:12:06 2012RFS[66]: Assigned to RFS process 13653RFS[66]: Opened log for thread 1 sequence 96 dbid 1285401128 branch 757620395Archived Log entry 83 added for thread 1 sequence 95 rlc 757620395 ID 0x4c9d8928 dest 2:Archived Log entry 84 added for thread 1 sequence 96 rlc 757620395 ID 0x4c9d8928 dest 2:Thu Mar 29 20:12:16 2012Media Recovery Log /home/oracle/arch1/standby/1_94_757620395.arcMedia Recovery Log /home/oracle/arch1/standby/1_95_757620395.arcMedia Recovery Log /home/oracle/arch1/standby/1_96_757620395.arcMedia Recovery Log /home/oracle/arch1/standby/1_97_757620395.arcMedia Recovery Log /home/oracle/arch1/standby/1_98_757620395.arc????:????????,????gap???,???ARC?????????gap??,????????????MRP???apply log??????gap,???????FAL????? ?:?11g,??????ARC??????RFS?MRP?????????????gap. 8. ????????MRP??FAL??gap??,????????????,??MRP?trace???:FAL[client, MRP0],?????FAL??? *** 2012-03-29 21:18:15.964 4265 krsh.cError 1031 received logging on to the standby*** 2012-03-29 21:18:15.964 4265 krsh.cFAL[client, MRP0]: Error 1031 connecting to PRIMARY for fetching gap sequence

  Read the article

• Unrecognized Token : "#" C# to SQLITE

  - by user2788405

  Background + Problem: ( Begginer here ) I want to populate sqlite db with values from a list I have in my c# code. Here's the sqlite code taken from finisarsqlite website: I modified it a bit by creating my own column names like "seq#" etc. But I'm getting the following error : "unrecognized token #" Maybe my syntax is off? Code: // [snip] - As C# is purely object-oriented the following lines must be put into a class: // We use these three SQLite objects: SQLiteConnection sqlite_conn; SQLiteCommand sqlite_cmd; SQLiteDataReader sqlite_datareader; // create a new database connection: sqlite_conn = new SQLiteConnection("Data Source=database.db;Version=3;New=True;Compress=True;"); // open the connection: sqlite_conn.Open(); // create a new SQL command: sqlite_cmd = sqlite_conn.CreateCommand(); // Let the SQLiteCommand object know our SQL-Query: sqlite_cmd.CommandText = "CREATE TABLE table1 (Seq# integer primary key, Field integer primary key, Description integer primary key);"; // Now lets execute the SQL ;D sqlite_cmd.ExecuteNonQuery(); <<< ---- This is where Error Occurs ! // Lets insert something into our new table: sqlite_cmd.CommandText = "INSERT INTO table1 (Seq#, Field, Description) VALUES (list[0], list[1], list[2]);"; // And execute this again ;D sqlite_cmd.ExecuteNonQuery(); // We are ready, now lets cleanup and close our connection: sqlite_conn.Close(); }

  Read the article

• ASP.NET MVC2 Radio Button generates duplicate HTML id-s

  - by Dmitriy Nagirnyak

  Hi, It seems that the default ASP.NET MVC2 Html helper generates duplicate HTML IDs when using code like this (EditorTemplates/UserType.ascx): <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<UserType>" %> <%: Html.RadioButton("", UserType.Primary, Model == UserType.Primary) %> <%: Html.RadioButton("", UserType.Standard, Model == UserType.Standard) %> <%: Html.RadioButton("", UserType.ReadOnly, Model == UserType.ReadOnly) %> The HTML it produces is: <input checked="checked" id="UserType" name="UserType" type="radio" value="Primary" /> <input id="UserType" name="UserType" type="radio" value="Standard" /> <input id="UserType" name="UserType" type="radio" value="ReadOnly" /> That clearly shows a problem. So I must be misusing the Helper or something. I can manually specify the id as html attribute but then I cannot guarantee it will be unique. So the question is how to make sure that the IDs generated by RadioButton helper are unique for each value and still preserve the conventions for generating those IDs (so nested models are respected? (Preferably not generating IDs manually.) Thanks, Dmitriy,

  Read the article

• MySQL Error 1452 - Cannot add or update a child row: a foreign key constraint fails

  - by dscher

  I've looked at other people's questions on this topic but can't seem to find where my error is coming from. Any help would be greatly appreciated. I'm including as much as I can think of that might help find the problem: CREATE TABLE stocks ( id INT AUTO_INCREMENT NOT NULL, user_id INT(11) UNSIGNED NOT NULL, ticker VARCHAR(20) NOT NULL, name VARCHAR(20), rating INT(11), position ENUM("strong buy", "buy", "sell", "strong sell", "neutral"), next_look DATE, privacy ENUM("public", "private"), PRIMARY KEY(id), FOREIGN KEY (user_id) REFERENCES users(id) ON DELETE CASCADE ) ENGINE=InnoDB DEFAULT CHARSET=utf8; CREATE TABLE IF NOT EXISTS `stocks_tags` ( `stock_id` INT NOT NULL, `tag_id` INT NOT NULL, PRIMARY KEY (`stock_id`,`tag_id`), KEY `fk_stock_tag` (`tag_id`), KEY `fk_tag_stock` (`stock_id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8; ALTER TABLE `stocks_tags` ADD CONSTRAINT `fk_stock_tag` FOREIGN KEY (`tag_id`) REFERENCES `tags` (`id`) ON DELETE CASCADE ON UPDATE CASCADE, ADD CONSTRAINT `fk_tag_stock` FOREIGN KEY (`stock_id`) REFERENCES `stocks` (`id`) ON DELETE CASCADE ON UPDATE CASCADE; CREATE TABLE tags( id INT AUTO_INCREMENT NOT NULL PRIMARY KEY, tags VARCHAR(30), UNIQUE(tags) ) ENGINE=INNODB DEFAULT CHARSET=utf8; And the error I'm getting: Database_Exception [ 1452 ]: Cannot add or update a child row: a foreign key constraint fails (`ddmachine`.`stocks_tags`, CONSTRAINT `fk_stock_tag` FOREIGN KEY (`tag_id`) REFERENCES `tags` (`id`) ON DELETE CASCADE ON UPDATE CASCADE) [ INSERT INTO `stocks_tags` (`stock_id`, `tag_id`) VALUES (19, 'cash') ] I did see that someone else had a similar problem based on their enum columns but don't think that's it.

  Read the article

• Adding a Contact with the Google Contacts .NET API

  - by Bryan

  I am using the following code to add a contact, but I get the following unhandled exception: Google.GData.Client.GDataRequestException: Execution of request failed: http://www.google.com/m8/feeds/contacts/default/full GDataCredentials myCred = new GDataCredentials("myusername", "mypassword"); RequestSettings myRequestSettings = new RequestSettings("macpapa-GoogleCodeTest3-1", myCred); ContactsRequest myContactRequest = new ContactsRequest(myRequestSettings); Contact myContact = new Contact(); myContact.Title = "Be Dazzle"; PhoneNumber myPhoneNumber = new PhoneNumber("805-453-6688"); myPhoneNumber.Rel = ContactsRelationships.IsGeneral; myPhoneNumber.Primary = true; myContact.Phonenumbers.Add(myPhoneNumber); EMail myEmail = new EMail("[email protected]", ContactsRelationships.IsHome); EMail myEmail2 = new EMail("[email protected]", ContactsRelationships.IsWork); myEmail.Primary = true; myContact.Emails.Add(myEmail); myContact.Emails.Add(myEmail2); PostalAddress postalAddress = new PostalAddress(); postalAddress.Value = "123 somewhere lane"; postalAddress.Primary = true; postalAddress.Rel = ContactsRelationships.IsHome; myContact.PostalAddresses.Add(postalAddress); Uri feedUri = new Uri(ContactsQuery.CreateContactsUri("default")); Contact createdContact = myContactRequest.Insert<Contact>(feedUri, myContact); Please offer any available suggestions. Thank you.

  Read the article

• Threading 101: What is a Dispatcher?

  - by Water Cooler v2

  Once upon a time, I remembered this stuff by heart. Over time, my understanding has diluted and I mean to refresh it. As I recall, any so called single threaded application has two threads: a) the primary thread that has a pointer to the main or DllMain entry points; and b) For applications that have some UI, a UI thread, a.k.a the secondary thread, on which the WndProc runs, i.e. the thread that executes the WndProc that recieves messages that Windows posts to it. In short, the thread that executes the Windows message loop. For UI apps, the primary thread is in a blocking state waiting for messages from Windows. When it recieves them, it queues them up and dispatches them to the message loop (WndProc) and the UI thread gets kick started. As per my understanding, the primary thread, which is in a blocking state, is this: C++ while(getmessage(/* args &msg, etc. */)) { translatemessage(&msg, 0, 0); dispatchmessage(&msg, 0, 0); } C# or VB.NET WinForms apps: Application.Run( new System.Windows.Forms() ); Is this what they call the Dispatcher? My questions are: a) Is my above understanding correct? b) What in the name of hell is the Dispatcher? c) Point me to a resource where I can get a better understanding of threads from a Windows/Win32 perspective and then tie it up with high level languages like C#. Petzold is sparing in his discussion on the subject in his epic work. Although I believe I have it somewhat right, a confirmation will be relieving.

  Read the article

• SubSonic 3 ignoring columns in Select()

  - by jessegavin

  I have a table like so.. CREATE TABLE [dbo].[Locations_Hours]( [LocationID] [int] NOT NULL, [sun_open] [nvarchar](10) NULL, [sun_close] [nvarchar](10) NULL, [mon_open] [nvarchar](10) NULL, [mon_close] [nvarchar](10) NULL, [tue_open] [nvarchar](10) NULL, [tue_close] [nvarchar](10) NULL, [wed_open] [nvarchar](10) NULL, [wed_close] [nvarchar](10) NULL, [thu_open] [nvarchar](10) NULL, [thu_close] [nvarchar](10) NULL, [fri_open] [nvarchar](10) NULL, [fri_close] [nvarchar](10) NULL, [sat_open] [nvarchar](10) NULL, [sat_close] [nvarchar](10) NULL, [StoreNumber] [int] NULL, [LocationHourID] [int] IDENTITY(1,1) NOT NULL, CONSTRAINT [PK_Locations_Hours] PRIMARY KEY CLUSTERED ( [LocationHourID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] And SubSonic 3 is generating a class with the following properties int LocationID string monopen string monclose string tueopen string tueclose string wedopen string wedclose string thuopen string thuclose string friopen string friclose string satopen string satclose string sunopen string sunclose int? StoreNumber int LocationHourID When I try to perform a query against this class like so.. var result = DB.LocationHours.Where(o => o.LocationID == _locationId); This is the resulting SQL query that SubSonic generates. SELECT [t0].[LocationHourID], [t0].[LocationID], [t0].[StoreNumber] FROM [dbo].[Locations_Hours] AS t0 WHERE ([t0].[LocationID] = 4019) I cannot figure out why SubSonic is omitting the nvarchar fields when it generates the SELECT statement. Anyone got any ideas?

  Read the article

• Make a Crystal Report with data fetched from two differents tables

  - by Selom

  Hi, Im using vb.net and I need to fetch data from two different tables and display it in form of report. These are the schemas and data of my two tables: CREATE TABLE personal_details (staff_ID integer PRIMARY KEY, title varchar(10), fn varchar(250), ln varchar(250), mn varchar(250), dob varchar(50), hometown varchar(250), securityno varchar(50), phone varchar(15), phone2 varchar(15), phone3 varchar(15), email varchar(250), address varchar(300), confirmation varchar(50), retirement varchar(50), designation varchar(250), region varchar(250)); INSERT INTO personal_details VALUES(1,'Mr.','Selom','AMOUZOU','Kokou','Sunday, March 28, 2010','Ho',7736,'024-747-4883','277-383-8383','027-838-3837','[email protected]','Lapaz Kum Hotel','Sunday, March 28, 2010','Sunday, March 28, 2010','Designeur','Brong Ahafo'); CREATE TABLE training( training_ID integer primary key NOT NULL, staff_ID varchar(100), training_level varchar (60), school_name varchar(100), start_date varchar(100), end_date varchar(100)); INSERT INTO training VALUES(1,1,'Primary School','New School','Feb 1955','May 1973'); INSERT INTO training VALUES(2,1,'Middle/JSS','Ipmc','Feb 1955','May 1973'); Im trying to fetch and display data from the tables above the following way: Dim rpt As New CrystalReport1() Dim da As New SQLiteDataAdapter Dim ds As New presbydbDataSet ds.EnforceConstraints = False If conn.State = ConnectionState.Closed Then conn.Open() End If Dim cmd As New SQLiteCommand("SELECT p.fn, t.training_level FROM personal_details p INNER JOIN training t ON p.staff_ID = t.staff_ID", conn) cmd.ExecuteNonQuery() da.SelectCommand = cmd da.Fill(ds) rpt.SetDataSource(ds) CrystalReportViewer1.ReportSource = rpt conn.Close() My problem is that nothing displays on the report unless I take off either the training fields or the personal_details fields from the report. Need your help. Thanks

  Read the article

• T SQL Rotate row into columns

  - by cshah

  SQL 2005 using T-SQL, I want to rotate rows into columns. Sample script: Use TempDB Go CREATE TABLE [dbo].[CPPrinter_InkLevels]( [CPPrinter_InkLevels_ID] [int] IDENTITY(1,1) NOT NULL, [CPMeasurementGUID] [uniqueidentifier] NOT NULL, [InkName] [varchar](30) NOT NULL, [InkLevel] [decimal](6, 2) NOT NULL, CONSTRAINT [PK_CPPrinter_InkLevels] PRIMARY KEY CLUSTERED ( [CPPrinter_InkLevels_ID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO SET IDENTITY_INSERT [dbo].[CPPrinter_InkLevels] ON INSERT [dbo].[CPPrinter_InkLevels] ([CPPrinter_InkLevels_ID], [CPMeasurementGUID], [InkName], [InkLevel]) VALUES (1, N'6acc1562-4e02-45ff-b480-9e01fb97fccf', N'Black', CAST(0.60 AS Decimal(6, 2))) INSERT [dbo].[CPPrinter_InkLevels] ([CPPrinter_InkLevels_ID], [CPMeasurementGUID], [InkName], [InkLevel]) VALUES (2, N'6acc1562-4e02-45ff-b480-9e01fb97fccf', N'Cyan', CAST(0.69 AS Decimal(6, 2))) INSERT [dbo].[CPPrinter_InkLevels] ([CPPrinter_InkLevels_ID], [CPMeasurementGUID], [InkName], [InkLevel]) VALUES (3, N'6acc1562-4e02-45ff-b480-9e01fb97fccf', N'Magenta', CAST(0.55 AS Decimal(6, 2))) INSERT [dbo].[CPPrinter_InkLevels] ([CPPrinter_InkLevels_ID], [CPMeasurementGUID], [InkName], [InkLevel]) VALUES (4, N'6acc1562-4e02-45ff-b480-9e01fb97fccf', N'Yellow', CAST(0.51 AS Decimal(6, 2))) INSERT [dbo].[CPPrinter_InkLevels] ([CPPrinter_InkLevels_ID], [CPMeasurementGUID], [InkName], [InkLevel]) VALUES (5, N'6acc1562-4e02-45ff-b480-9e01fb97fccf', N'Light Black', CAST(0.64 AS Decimal(6, 2))) INSERT [dbo].[CPPrinter_InkLevels] ([CPPrinter_InkLevels_ID], [CPMeasurementGUID], [InkName], [InkLevel]) VALUES (6, N'6acc1562-4e02-45ff-b480-9e01fb97fccf', N'Light Cyan', CAST(0.43 AS Decimal(6, 2))) INSERT [dbo].[CPPrinter_InkLevels] ([CPPrinter_InkLevels_ID], [CPMeasurementGUID], [InkName], [InkLevel]) VALUES (7, N'6acc1562-4e02-45ff-b480-9e01fb97fccf', N'Light Magenta', CAST(0.30 AS Decimal(6, 2))) INSERT [dbo].[CPPrinter_InkLevels] ([CPPrinter_InkLevels_ID], [CPMeasurementGUID], [InkName], [InkLevel]) VALUES (8, N'6acc1562-4e02-45ff-b480-9e01fb97fccf', N'Waste Tank', CAST(0.18 AS Decimal(6, 2))) INSERT [dbo].[CPPrinter_InkLevels] ([CPPrinter_InkLevels_ID], [CPMeasurementGUID], [InkName], [InkLevel]) VALUES (9, N'932348a7-6e2f-4a10-9760-be1ae640c7d7', N'Black', CAST(0.60 AS Decimal(6, 2))) INSERT [dbo].[CPPrinter_InkLevels] ([CPPrinter_InkLevels_ID], [CPMeasurementGUID], [InkName], [InkLevel]) VALUES (10, N'932348a7-6e2f-4a10-9760-be1ae640c7d7', N'Cyan', CAST(0.69 AS Decimal(6, 2))) INSERT [dbo].[CPPrinter_InkLevels] ([CPPrinter_InkLevels_ID], [CPMeasurementGUID], [InkName], [InkLevel]) VALUES (11, N'932348a7-6e2f-4a10-9760-be1ae640c7d7', N'Magenta', CAST(0.55 AS Decimal(6, 2))) INSERT [dbo].[CPPrinter_InkLevels] ([CPPrinter_InkLevels_ID], [CPMeasurementGUID], [InkName], [InkLevel]) VALUES (12, N'932348a7-6e2f-4a10-9760-be1ae640c7d7', N'Yellow', CAST(0.51 AS Decimal(6, 2))) INSERT [dbo].[CPPrinter_InkLevels] ([CPPrinter_InkLevels_ID], [CPMeasurementGUID], [InkName], [InkLevel]) VALUES (13, N'932348a7-6e2f-4a10-9760-be1ae640c7d7', N'Light Black', CAST(0.64 AS Decimal(6, 2))) INSERT [dbo].[CPPrinter_InkLevels] ([CPPrinter_InkLevels_ID], [CPMeasurementGUID], [InkName], [InkLevel]) VALUES (14, N'932348a7-6e2f-4a10-9760-be1ae640c7d7', N'Light Cyan', CAST(0.43 AS Decimal(6, 2))) Go SELECT * FROM [dbo].[CPPrinter_InkLevels] --Desired output CPMeasuremnetGUID, Ink1, Level1, Ink2, Level2, Ink3, Level3....

  Read the article

• Cross join (pivot) with n-n table containing values

  - by Styx31

  I have 3 tables : TABLE MyColumn ( ColumnId INT NOT NULL, Label VARCHAR(80) NOT NULL, PRIMARY KEY (ColumnId) ) TABLE MyPeriod ( PeriodId CHAR(6) NOT NULL, -- format yyyyMM Label VARCHAR(80) NOT NULL, PRIMARY KEY (PeriodId) ) TABLE MyValue ( ColumnId INT NOT NULL, PeriodId CHAR(6) NOT NULL, Amount DECIMAL(8, 4) NOT NULL, PRIMARY KEY (ColumnId, PeriodId), FOREIGN KEY (ColumnId) REFERENCES MyColumn(ColumnId), FOREIGN KEY (PeriodId) REFERENCES MyPeriod(PeriodId) ) MyValue's rows are only created when a real value is provided. I want my results in a tabular way, as : Column | Month 1 | Month 2 | Month 4 | Month 5 | Potatoes | 25.00 | 5.00 | 1.60 | NULL | Apples | 2.00 | 1.50 | NULL | NULL | I have successfully created a cross-join : SELECT MyColumn.Label AS [Column], MyPeriod.Label AS [Period], ISNULL(MyValue.Amount, 0) AS [Value] FROM MyColumn CROSS JOIN MyPeriod LEFT OUTER JOIN MyValue ON (MyValue.ColumnId = MyColumn.ColumnId AND MyValue.PeriodId = MyPeriod.PeriodId) Or, in linq : from p in MyPeriods from c in MyColumns join v in MyValues on new { c.ColumnId, p.PeriodId } equals new { v.ColumnId, v.PeriodId } into values from nv in values.DefaultIfEmpty() select new { Column = c.Label, Period = p.Label, Value = nv.Amount } And seen how to create a pivot in linq (here or here) : (assuming MyDatas is a view with the result of the previous query) : from c in MyDatas group c by c.Column into line select new { Column = line.Key, Month1 = line.Where(l => l.Period == "Month 1").Sum(l => l.Value), Month2 = line.Where(l => l.Period == "Month 2").Sum(l => l.Value), Month3 = line.Where(l => l.Period == "Month 3").Sum(l => l.Value), Month4 = line.Where(l => l.Period == "Month 4").Sum(l => l.Value) } But I want to find a way to create a resultset with, if possible, Month1, ... properties dynamic. Note : A solution which results in a n+1 query : from c in MyDatas group c by c.Column into line select new { Column = line.Key, Months = from l in line group l by l.Period into period select new { Period = period.Key, Amount = period.Sum(l => l.Value) } }

  Read the article

• Firebird sequence-backed ID shorthand

  - by pilcrow

  What do others do to simplify the creation of simple, serial surrogate keys populated by a SEQUENCE (a.k.a. GENERATOR) in Firebird = 2.1? I finc the process comparatively arduous: For example, in PostgreSQL, I simply type: pg> CREATE TABLE tbl ( > id SERIAL NOT NULL PRIMARY KEY, > ... In MySQL, I simply type: my> CREATE TABLE tbl ( > id INT NOT NULL PRIMARY KEY AUTO_INCREMENT, > ... But in Firebird I type: fb> CREATE TABLE tbl ( > id BIGINT NOT NULL PRIMARY KEY, > ... fb> CREATE SEQUENCE tbl_id_seq; fb> SET TERM !!; > CREATE TRIGGER tbl_id_trg FOR tbl > ACTIVE BEFORE INSERT POSITION 0 > AS > BEGIN > IF ((new.id IS NULL) OR (new.id <= 0)) THEN > BEGIN > new.id = GEN_ID(tbl_id_seq, 1); > END > END !! > SET TERM ; !! ... and I get pretty bored by the time I reach trigger definition. However, I routinely make SEQUENCE-backed ID fields for temporary, developement and throw-away tables. What do others do to simplify this? Work with an IDE? Run a pre-processing, in-house perl script over the DDL file? Etc.

  Read the article

• Google App Engine on Google Apps Domain

  - by Bob Ralian

  I'm having trouble getting my domain pointed to my website hosted with google app engine. Here's the background... take care to separate the concepts of "google apps" (domain hosting, email, etc.) and "google app engine" (website framework). I have a domain that's using Google Apps for Your Domain, let's call it company.com. So my login for my google apps account is [email protected]. I have a different domain that is aliased back to my google apps account, let's call it mycompany.com. It's been successfully aliased and registered with my primary google apps account using the cname method, and has updated mx records. We have a ton of domains, and I only want to use one "google apps" account to maintain them all. Now I have a website I've built using google app engine, and the url is effectively mycompany.appspot.com. I want to get mycompany.com to point to my website that currently resides at mycompany.appspot.com. There's a spot in the google app engine dashboard under application settings where you can add a domain. So I click there and enter mycompany.com and I get an error message saying that domain is not using google apps. If I back up to the page I submitted, there's a note saying I need to register the domain with google apps. So I click the link to do that and enter mycompany.com and I get an error message saying the domain has been registered and is in the process of ownership verification. But that process is already finished. So... what do I do? Does google app engine not support a domain that is only aliased to a primary google apps account? Does mycompany.com need to have its own primary google apps account?

  Read the article

• Cascading Deletes in SQL Sever 2008 not working.

  - by Vaccano

  I have the following table setup. Bag | +-> BagID (Guid) +-> BagNumber (Int) BagCommentRelation | +-> BagID (Int) +-> CommentID (Guid) BagComment | +-> CommentID (Guid) +-> Text (varchar(200)) BagCommentRelation has Foreign Keys to Bag and BagComment. So, I turned on cascading deletes for both those Foreign Keys, but when I delete a bag, it does not delete the Comment row. Do need to break out a trigger for this? Or am I missing something? (I am using SQL Server 2008) Note: Posting requested SQL. This is the defintion of the BagCommentRelation table. (I had the type of the bagID wrong (I thought it was a guid but it is an int).) CREATE TABLE [dbo].[Bag_CommentRelation]( [Id] [int] IDENTITY(1,1) NOT NULL, [BagId] [int] NOT NULL, [Sequence] [int] NOT NULL, [CommentId] [int] NOT NULL, CONSTRAINT [PK_Bag_CommentRelation] PRIMARY KEY CLUSTERED ( [BagId] ASC, [Sequence] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO ALTER TABLE [dbo].[Bag_CommentRelation] WITH CHECK ADD CONSTRAINT [FK_Bag_CommentRelation_Bag] FOREIGN KEY([BagId]) REFERENCES [dbo].[Bag] ([Id]) ON DELETE CASCADE GO ALTER TABLE [dbo].[Bag_CommentRelation] CHECK CONSTRAINT [FK_Bag_CommentRelation_Bag] GO ALTER TABLE [dbo].[Bag_CommentRelation] WITH CHECK ADD CONSTRAINT [FK_Bag_CommentRelation_Comment] FOREIGN KEY([CommentId]) REFERENCES [dbo].[Comment] ([CommentId]) ON DELETE CASCADE GO ALTER TABLE [dbo].[Bag_CommentRelation] CHECK CONSTRAINT [FK_Bag_CommentRelation_Comment] GO The row in this table deletes but the row in the comment table does not.

  Read the article

• Database design for invoices, invoice lines & revisions

  - by FreshCode

  I'm designing the 2nd major iteration of a relational database for a franchise's CRM (with lots of refactoring) and I need help on the best database design practices for storing job invoices and invoice lines with a strong audit trail of any changes made to each invoice. Current schema Invoices Table InvoiceId (int) // Primary key JobId (int) StatusId (tinyint) // Pending, Paid or Deleted UserId (int) // auditing user Reference (nvarchar(256)) // unique natural string key with invoice number Date (datetime) Comments (nvarchar(MAX)) InvoiceLines Table LineId (int) // Primary key InvoiceId (int) // related to Invoices above Quantity (decimal(9,4)) Title (nvarchar(512)) Comment (nvarchar(512)) UnitPrice (smallmoney) Revision schema InvoiceRevisions Table RevisionId (int) // Primary key InvoiceId (int) JobId (int) StatusId (tinyint) // Pending, Paid or Deleted UserId (int) // auditing user Reference (nvarchar(256)) // unique natural string key with invoice number Date (datetime) Total (smallmoney) Schema design considerations 1. Is it sensible to store an invoice's Paid or Pending status? All payments received for an invoice are stored in a Payments table (eg. Cash, Credit Card, Cheque, Bank Deposit). Is it meaningful to store a "Paid" status in the Invoices table if all the income related to a given job's invoices can be inferred from the Payments table? 2. How to keep track of invoice line item revisions? I can track revisions to an invoice by storing status changes along with the invoice total and the auditing user in an invoice revision table (see InvoiceRevisions above), but keeping track of an invoice line revision table feels hard to maintain. Thoughts? 3. Tax How should I incorporate sales tax (or 14% VAT in SA) when storing invoice data?

  Read the article

• how to programmatically create menu items while creating nodes?

  - by sprugman

  I'm creating some nodes programmatically, thus: foreach ($titles as $t) { $n = new stdClass(); $n->type = 'myType'; $n->uid = 1; $n->title = $t; $menu = array(); $menu['link_title'] = $t; $menu['menu_name'] = 'primary-links'; // this attempt at placing the menu item in a particular place in the // menu hierarchy didn't work: $menu['parent'] = 'primary-links:867'; $menu['depth'] = 3; $menu['p1'] = '580'; $menu['p2'] = '867'; $n->menu = $menu; node_save($n); } I've got a menu structure like this: primary-links Parent 1 Child 1 Child 2 Parent 2 Child 3 I want the new menu items to appear as children of Child 3. I was able to create menu items at the same time as the nodes, and they appeared in the correct menu, but not in the correct place in the hierarchy. What am I missing?

  Read the article

• Two n x m relationships with the same table in mysql

  - by Christian

  I want to create a database in which there's an n x m relationship between the table drug and the table article and an n x m relationship between the table target and the table article. I get the error: Cannot delete or update a parent row: a foreign key constraint fails What do I have to change in my code? DROP TABLE IF EXISTS `textmine`.`article`; CREATE TABLE `textmine`.`article` ( `id` int(10) unsigned NOT NULL AUTO_INCREMENT COMMENT 'Pubmed ID', `abstract` blob NOT NULL, `authors` blob NOT NULL, `journal` varchar(256) CHARACTER SET utf8 COLLATE utf8_bin NOT NULL, PRIMARY KEY (`id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8; DROP TABLE IF EXISTS `textmine`.`drugs`; CREATE TABLE `textmine`.`drugs` ( `id` int(10) unsigned NOT NULL COMMENT 'This ID is taken from the biosemantics dictionary', `primaryName` varchar(256) CHARACTER SET utf8 COLLATE utf8_bin NOT NULL, PRIMARY KEY (`id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8; DROP TABLE IF EXISTS `textmine`.`targets`; CREATE TABLE `textmine`.`targets` ( `id` int(10) unsigned NOT NULL AUTO_INCREMENT, `primaryName` varchar(256) CHARACTER SET utf8 COLLATE utf8_bin NOT NULL, PRIMARY KEY (`id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8; DROP TABLE IF EXISTS `textmine`.`containstarget`; CREATE TABLE `textmine`.`containstarget` ( `targetid` int(10) unsigned NOT NULL, `articleid` int(10) unsigned NOT NULL, KEY `target` (`targetid`), KEY `article` (`articleid`), CONSTRAINT `article` FOREIGN KEY (`articleid`) REFERENCES `article` (`id`), CONSTRAINT `target` FOREIGN KEY (`targetid`) REFERENCES `targets` (`id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8; DROP TABLE IF EXISTS `textmine`.`contiansdrug`; CREATE TABLE `textmine`.`contiansdrug` ( `drugid` int(10) unsigned NOT NULL, `articleid` int(10) unsigned NOT NULL, KEY `drug` (`drugid`), KEY `article` (`articleid`), CONSTRAINT `article` FOREIGN KEY (`articleid`) REFERENCES `article` (`id`), CONSTRAINT `drug` FOREIGN KEY (`drugid`) REFERENCES `drugs` (`id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8;

  Read the article

• using a JOIN in an UPDATE in SQL

  - by SDLFunTimes

  Hi, I'm having trouble formulating a legal statement to double the statuses of the suppliers (s) who have shipped (sp) more than 500 units. I've been trying: update s set s.status = s.status * 2 from s join sp on (sp.sno = s.sno) group by sno having sum(qty) > 500; however I'm getting this error from Mysql: ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'from s join sp on (sp.sno = s.sno) group by sno having sum(qty) > 500' at line 1 Does anyone have any ideas about what is wrong with this query? Here's my schema: create table s ( sno char(5) not null, sname char(20) not null, status smallint, city char(15), primary key (sno) ); create table p ( pno char(6) not null, pname char(20) not null, color char(6), weight smallint, city char(15), primary key (pno) ); create table sp ( sno char(5) not null, pno char(6) not null, qty integer not null, primary key (sno, pno) );

  Read the article

• What are the hibernate annotations used to persist a value typed Map with an enumerated type as a ke

  - by Jason Novak

  I am having trouble getting the right hibernate annotations to use on a value typed Map with an enumerated class as a key. Here is a simplified (and extremely contrived) example. public class Thing { public String id; public Letter startLetter; public Map<Letter,Double> letterCounts = new HashMap<Letter, Double>(); } public enum Letter { A, B, C, D } Here are my current annotations on Thing @Entity public class Thing { @Id public String id; @Enumerated(EnumType.STRING) public Letter startLetter; @CollectionOfElements @JoinTable(name = "Thing_letterFrequencies", joinColumns = @JoinColumn(name = "thingId")) @MapKey(columns = @Column(name = "letter", nullable = false)) @Column(name = "count") public Map<Letter,Double> letterCounts = new HashMap<Letter, Double>(); } Hibernate generates the following DDL to create the tables for my MySql database create table Thing (id varchar(255) not null, startLetter varchar(255), primary key (id)) type=InnoDB; create table Thing_letterFrequencies (thingId varchar(255) not null, count double precision, letter tinyblob not null, primary key (thingId, letter)) type=InnoDB; Notice that hibernate tries to define letter (my map key) as a tinyblob, however it defines startLetter as a varchar(255) even though both are of the enumerated type Letter. When I try to create the tables I see the following error BLOB/TEXT column 'letter' used in key specification without a key length I googled this error and it appears that MySql has issues when you try to make a tinyblob column part of a primary key, which is what hibernate needs to do with the Thing_letterFrequencies table. So I would rather have letter mapped to a varchar(255) the way startLetter is. Unfortunately, I've been fussing with the MapKey annotation for a while now and haven't been able to make this work. I've also tried @MapKeyManyToMany(targetEntity=Product.class) without success. Can anyone tell me what are the correct annotations for my letterCounts map so that hibernate will treat the letterCounts map key the same way it does startLetter?

  Read the article

• How to insert records in master/detail relationship

  - by croceldon

  I have two tables: OutputPackages (master) |PackageID| OutputItems (detail) |ItemID|PackageID| OutputItems has an index called 'idxPackage' set on the PackageID column. ItemID is set to auto increment. Here's the code I'm using to insert masters/details into these tables: //fill packages table for i := 1 to 10 do begin Package := TfPackage(dlgSummary.fcPackageForms.Forms[i]); if Package.PackageLoaded then begin with tblOutputPackages do begin Insert; FieldByName('PackageID').AsInteger := Package.ourNum; FieldByName('Description').AsString := Package.Title; FieldByName('Total').AsCurrency := Package.Total; Post; end; //fill items table for ii := 1 to 10 do begin Item := TfPackagedItemEdit(Package.fc.Forms[ii]); if Item.Activated then begin with tblOutputItems do begin Append; FieldByName('PackageID').AsInteger := Package.ourNum; FieldByName('Description').AsString := Item.Description; FieldByName('Comment').AsString := Item.Comment; FieldByName('Price').AsCurrency := Item.Price; Post; //this causes the primary key exception end; end; end; end; This works fine as long as I don't mess with the MasterSource/MasterFields properties in the IDE. But once I set it, and run this code I get an error that says I've got a duplicate primary key 'ItemID'. I'm not sure what's going on - this is my first foray into master/detail, so something may be setup wrong. I'm using ComponentAce's Absolute Database for this project. How can I get this to insert properly? Update Ok, I removed the primary key restraint in my db, and I see that for some reason, the autoincrement feature of the OutputItems table isn't working like I expected. Here's how the OutputItems table looks after running the above code: ItemID|PackageID| 1 |1 | 1 |1 | 2 |2 | 2 |2 | I still don't see why all the ItemID values aren't unique.... Any ideas?

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >